ZTE SH Pharos Lab Configuration Files

ZTE SH Lab Specification

Introduction

ZTE SH Pharos lab currently has three PODs available in Shanghai. Each POD has 5 servers, 3 controller nodes and 2 computer nodes. These PODs are dedicatedly used for Production/CI. These PODs focus scenarios related with test projects, installer projects and performance enhancement projects, such as KVM, OVS, FDS, etc.

Scenarios planned are list here:

  • os-nosdn-kvm-ha
  • os-nosdn-kvm_ovs-ha

Scenarios are defined in Colorado Scenario Status

Lab Resources

POD Name Project(s) PTL(s) Email(s) POD Role Status Notes
POD1 FUEL Gregory Elkinbard gelkinbard@mirantis.com CI: latest Active Yardstick Funtest Doctor Parser
POD2 FUEL Gregory Elkinbard gelkinbard@mirantis.com CI: latest Active Qtip
POD3 FUEL Gregory Elkinbard gelkinbard@mirantis.com CI: latest Active NFV-KVM OVSNFV

Acceptable Usage Policy

Resources located in OPNFV ZTE SH lab shall only be used for CI, infra setup/configuration and troubleshooting purposes. No development work is allowed in these PODs.

Remote Access Infrastructure

ZTE SH lab provide the OpenVPN access for you.

Remote Access Procedure

Access to this environment can be granted by sending an e-mail to: yangyang1@zte.com.cn.

Subject: opnfv zte-pod[1-3] access.

The following information should be provided in the request:

Full name:
E-mail:
Organization:
Why is access needed:
How long is access needed:
What sepcific Host will be accessed:
What support is needed from zte admin:

Once access requirment is approved, the instructions for setting up VPN access will be send to you by mail.

Lab Documentation

Lab Topology

Lab diagram not found

All the PODs share the same Jump Host for only one public IP address is allocated for the pharos lab. Deploy servers are separated from Jump Host. Every 2 PODs share one Deploy Server.

Jump Host

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Rabbit HP 5500
X5647x2 24 250GB SAS 2 TB HDD IF0: a0:36:9f:00:11:34/ 192.168.1.1/ native vlan/OA IF1: a0:36:9f:00:11:35/ 172.10.0.1/ vlan 103/Public 172.20.0.1/ vlan 113/Public 172.60.0.1/ vlan 163/Public 172.70.0.1/ vlan 173/Public IF2: a0.36:9:00:11:37/ 116.228.53.183/ native vlan/ Internet    

ZTE POD1 Specification

Introduction

POD1(means ZTE-POD1) uses Fuel as the installer and performs os-odl_l2-nofeature-ha CI latest verification. Currently, test projects such as Yardstick, Functest are performing daily CI tasks. Fueature projects such as Doctor, Parser will perform daily and verify CI tasks.

Additional Requirements

Server Specifications

Jump Host

POD1 share the same Jump Host in the lab.

Deploy server

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Jellyfish ZTE R5300 277662500093 E5-2620x2 128 600GB SAS 4 TB HDD IF0: 74:4a:a4:00:91:b3/ 10.20.6.1/ native vlan/PXE IF1: 74:4a:a4:00:91:b4/ 10.20.7.1/ native vlan/PXE    

Nodes/Servers

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
node1 ZTE E9000 281498500141 E5-2680x2 128 600GB HDD 129.5.1.101 4c:09:b4:b2:59:84 zteroot/superuser enp129s0f0: 4c:09:b4:b2:59:87 vlan 1/PXE vlan 101/management enp2s0f0: 4c:09:b4:b1:de:38 vlan 1/ public vlan 103/ private enp132s0f0: 4c:09:b4:b1:de:3a vlan 102/ storage  
node2 ZTE E9000 281498500179 E5-2680x2 128 600GB HDD 129.5.1.22 4c:09:b4:b2:59:f9 zteroot/superuser enp129s0f0: 4c:09:b4:b2:59:fc vlan 1/PXE vlan 101/management enp2s0f0: 4c:09:b4:b1:de:40 vlan 1/ public vlan 103/ private enp132s0f0: 4c:09:b4:b1:de:42 vlan 102/ storage  
node3 ZTE E9000 281498500008 E5-2680x2 128 600GB HDD 129.5.1.3 4c:09:b4:b2:59:9f zteroot/superuser enp129s0f0: 4c:09:b4:b2:59:a2 vlan 1/PXE vlan 101/management enp2s0f0: 4c:09:b4:b1:de:1c vlan 1/ public vlan 103/ private enp132s0f0: 4c:09:b4:b1:de:1e vlan 102/ storage  
node4 ZTE E9000 281498500157 E5-2680x2 128 600GB HDD 129.5.1.4 4c:09:b4:b2:59:d5 zteroot/superuser enp129s0f0: 4c:09:b4:b2:59:d8 vlan 1/PXE vlan 101/management enp2s0f0: 4c:09:b4:b1:de:18 vlan 1/ public vlan 103/ private enp132s0f0: 4c:09:b4:b1:de:1a vlan 102/ storage  
node5 ZTE E9000 281498500119 E5-2680x2 128 600GB HDD 129.5.1.5 4c:09:b4:b2:59:72 zteroot/superuser enp129s0f0: 4c:09:b4:b2:59:75 vlan 1/PXE vlan 101/management enp2s0f0: 4c:09:b4:b1:de:48 vlan 1/ public vlan 103/ private enp132s0f0: 4c:09:b4:b1:de:4a vlan 102/ storage  

Subnet allocations

Network name Address Mask Gateway VLAN id
Public 172.10.0.0 255.255.255.0 172.10.0.1 untagged
Fuel Admin/PXE 10.20.0.0 255.255.255.0 10.20.0.2 native vlan 1
Fuel Mangement 192.168.10.0 255.255.255.0   101
Fuel Storage 192.168.11.0 255.255.255.0   102

VPN Users

Name Email Project Role Notes
         

Firewall Rules

Port(s) Service Note
1194(OpenVPN) Jenkins  

POD Topology

POD diagram not found

ZTE POD2 Specification

Introduction

POD2(means ZTE-POD2) uses Fuel as the installer and performs os-odl_l2-nofeature-ha CI latest verification. Qtip daily CI task will be migrated from POD1 to POD2. Qtip is also working on integration with Yardstick umbrella project.

Additional Requirements

Server Specifications

Jump Host

POD2 share the same Jump Host in the lab.

Deploy Server

POD2 share the same Deploy Server with POD1.

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Jellyfish ZTE R5300 277662500093 E5-2620x2 128 600GB SAS 4 TB HDD IF0: 74:4a:a4:00:91:b3/ 10.20.6.1/ native vlan/PXE IF1: 74:4a:a4:00:91:b4/ 10.20.7.1/ native vlan/PXE    

Compute Nodes

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
node1 ZTE E9000 281498500141 E5-2680x2 128 600GB HDD 129.5.1.9 3c:da:2a:e8:01:ea zteroot/superuser enp129s0f0: 3c:da:2a:e8:01:ed vlan 500/PXE vlan 501/management enp2s0f0: 3c:da:2a:e9:02:dc vlan 500/ public vlan 503/ private enp132s0f0: 3c:da:2a:e9:02:de vlan 502/ storage  
node2 ZTE E9000 281498500179 E5-2680x2 128 600GB HDD 129.5.1.10 3c:da:2a:e8:02:49 zteroot/superuser enp129s0f0: 3c:da:2a:e8:02:4c vlan 500/PXE vlan 501/management enp2s0f0: 3c:da:2a:e9:02:d0 vlan 500/ public vlan 503/ private enp132s0f0: 3c:da:2a:e9:02:d2 vlan 502/ storage  
node3 ZTE E9000 281498500008 E5-2680x2 128 600GB HDD 129.5.1.11 3c:da:2a:e8:01:a4 zteroot/superuser enp129s0f0: 3c:da:2a:e8:01:a7 vlan 500/PXE vlan 501/management enp2s0f0: 3c:da:2a:e9:02:ec vlan 500/ public vlan 503/ private enp132s0f0: 3c:da:2a:e9:02:ee vlan 502/ storage  
node4 ZTE E9000 281498500157 E5-2680x2 128 600GB HDD 129.5.1.12 3c:da:2a:e8:01:c7 zteroot/superuser enp129s0f0: 3c:da:2a:e8:01:ca vlan 500/PXE vlan 501/management enp2s0f0: 3c:da:2a:e9:02:d4 vlan 500/ public vlan 503/ private enp132s0f0: 3c:da:2a:e9:02:d6 vlan 502/ storage  
node5 ZTE E9000 281498500119 E5-2680x2 128 600GB HDD 129.5.1.13 3c:da:2a:e8:01:b3 zteroot/superuser enp129s0f0: 3c:da:2a:e8:01:b6 vlan 500/PXE vlan 501/management enp2s0f0: 3c:da:2a:e9:02:ac vlan 500/ public vlan 503/ private enp132s0f0: 3c:da:2a:e9:02:ae vlan 502/ storage  

Subnet allocations

Network name Address Mask Gateway VLAN id
Public 172.30.0.0 255.255.255.0 172.30.0.1 Untagged
Fuel Admin 10.20.1.0 255.255.255.0 10.20.1.1 native vlan 500
Fuel Mangement 192.168.30.0 255.255.255.0   501
Fuel Storage 192.168.31.0 255.255.255.0   502

VPN Users

Name Email Project Role Notes
         

Firewall Rules

Port(s) Service Note
1194(OpenVPN) Jenkins  

POD Topology

POD diagram not found

ZTE SH POD3 Specification

Introduction

POD3(means ZTE-POD3) uses Fuel as the installer and performs os-nosdn-kvm-ha CI latest verification. Feature projects like NFV-KVMV, OVSNFV will be run in this POD.

Additional Requirements

Server Specifications

Jump Host

POD3 share the same Jump Host in the lab.

Deploy Server

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Spider ZTE R5300 210077307607 E5-2609x1 32 600GB SAS 1.2TB SCSI IF0: 74:4a:a4:00:21:0b/ 10.20.0.1/ native vlan/PXE IF1: 74:4a:a4:00:21:0c/ 10.20.1.1/ native vlan/PXE    

Compute Nodes

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
node1 ZTE E9000 289016500203 E5-2670x2 64 600GB HDD 192.168.1.32 0c:12:62:e4:bf:de zteroot/superuser   enp2s0f0: 74:4a:a4:00:0b:85 vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:0b:86 vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:0b:87 vlan 102/ storage enp132s0f1: 74:4a:a4:00:0b:88 vlan 103/ public vlan 1020/ private  
node2 ZTE E9000 289016500197 E5-2670x2 64 600GB HDD 192.168.1.33 0C:12:62:E4:C0:33 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:5d vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:5e vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:5f vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:60 vlan 103/ public vlan 1020/ private  
node3 ZTE E9000 289016500003 E5-2670x2 64 600GB HDD 192.168.1.34 74:4A:A4:00:30:93 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:35 vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:36 vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:37 vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:38 vlan 103/ public vlan 1020/ private  
node4 ZTE E9000 289016500105 E5-2670x2 64 600GB HDD 192.168.1.35 0C:12:62:E4:C0:42 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:69 vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:6a vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:6b vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:6c vlan 103/ public vlan 1020/ private  
node5 ZTE E9000 289016500195 E5-2670x2 64 600GB HDD 192.168.1.36 74:4A:A4:00:30:43 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:6d vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:6e vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:6f vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:70 vlan 103/ public vlan 1020/ private  

Subnet allocations

Network name Address Mask Gateway VLAN id
Public 172.10.0.0 255.255.255.0 172.10.0.1 103
Fuel Admin/PXE 10.20.0.0 255.255.255.0 10.20.0.1 native valn 100
Fuel Mangement 192.168.11.0 255.255.255.0   101
Fuel Storage 192.168.12.0 255.255.255.0   102

VPN Users

Name Email Project Role Notes
         

Firewall Rules

Port(s) Service Note
5000(OpenVPN) Jenkins  

POD Topology

POD diagram not found