PHAROS Community Labs

Dell OPNFV Testlab

Overview

Dell is hosting an OPNFV testlab at its Santa Clara facility. The testlab would host baremetal servers for the use of OPNFV community as part of the OPNFV Pharos Project

The Dell Testlab consists of 2 PODs
  • POD1 for Fuel
  • POD2 for Foreman
Dell Testlab Overiew
Each of the 2 PODs consists of 6 servers that consist of
  • 1 Jump Server
  • 3 Servers for Control Nodes
  • 2 Servers for Compute Nodes

Hardware details

All the servers within the two PODs reside within a single Dell PowerEdge 620 chassis and have the following specifications:

POD1-Fuel

Hostname Model Memory Storage Processor Socket
Fuel Jump Server Dell PowerEdge M620 64 GB 1200GB HDD Intel Xeon E5-2640 2
Node2 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node3 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node4 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node5 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node6 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2

POD2-Foreman

Hostname Model Memory Storage Processor Socket
Foreman Jump Server Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node7 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node8 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node9 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node11 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node12 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2

Software

The Jump servers in the Testlab are pre-provisioned with the following softwares:

  • Fuel-Jump Server:
  1. OS: Ubuntu 14.04
  • Foreman-Jump Server:
  1. OS: CentOS7

Networks

POD1-Fuel

POD1-Fuel Overview
Hostname NIC Model Ports MAC BW Roles
Fuel Jump 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:81 10G Unused
    em2 A4:1F:72:11:B4:84 10G Unused
  2, Intel 82599 p3p1 A4:1F:72:11:B4:85 10G Public
    p3p2 A4:1F:72:11:B4:87 10G Fuel Admin/mgmt/pvt/ storage
  3, Intel 82599 p1p1 A4:1F:72:11:B4:89 10G Unused
    p1p2 A4:1F:72:11:B4:8B 10G Unused
Node2 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:8E 10G Unused
    em2 A4:1F:72:11:B4:91 10G Unused
  2, Intel 82599 p3p1 A4:1F:72:11:B4:92 10G Public
    p3p2 A4:1F:72:11:B4:94 10G Fuel Admin/mgmt/pvt/ storage
  3, Intel 82599 p1p1 A4:1F:72:11:B4:96 10G Unused
    p1p2 A4:1F:72:11:B4:98 10G Unused
Node3 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:9B 10G Unused
    em2 A4:1F:72:11:B4:9E 10G Unused
  2, Intel 82599 p3p1 A4:1F:72:11:B4:9F 10G Public
    p3p2 A4:1F:72:11:B4:A1 10G Fuel Admin/mgmt/pvt/ storage
  3, Intel 82599 p1p1 A4:1F:72:11:B4:A3 10G Unused
    p1p2 A4:1F:72:11:B4:A5 10G Unused
Node4 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:A8 10G Unused
    em2 A4:1F:72:11:B4:AB 10G Unused
  2, Intel 82599 p3p1 A4:1F:72:11:B4:AC 10G Public
    p3p2 A4:1F:72:11:B4:AE 10G Fuel Admin/mgmt/pvt/ storage
  3, Intel 82599 p1p1 A4:1F:72:11:B4:B0 10G Unused
    p1p2 A4:1F:72:11:B4:B1 10G Unused
Node5 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:B5 10G Unused
    em2 A4:1F:72:11:B4:B8 10G Unused
  2, Intel 82599 p3p1 A4:1F:72:11:B4:B9 10G Public
    p3p2 A4:1F:72:11:B4:BB 10G Fuel Admin/mgmt/pvt/ storage
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:BD 10G Unused
    p1p2 A4:1F:72:11:B4:C0 10G Unused
Node6 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:C2 10G Unused
    em2 A4:1F:72:11:B4:C5 10G Unused
  2, Intel 82599 p3p1 A4:1F:72:11:B4:C6 10G Public
    p3p2 A4:1F:72:11:B4:C8 10G Fuel Admin/mgmt/pvt/ storage
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:CA 10G Unused
    p1p2 A4:1F:72:11:B4:CD 10G Unused

POD2-Foreman

POD2-Foreman Overview
Hostname NIC Model Ports MAC BW Roles
Foreman Jump 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B5:1D 10G Foreman Admin
    em2 A4:1F:72:11:B5:20 10G Foreman Private/ Storage
  2, Intel 82599 p3p1 A4:1F:72:11:B5:21 10G Public
    p3p2 A4:1F:72:11:B5:23 10G Unused
  3, TBD p1p1 A4:1F:72:11:B4:89 10G Unused
    p1p2 A4:1F:72:11:B4:8B 10G Unused
Node7 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:CF 10G Foreman Admin
    em2 A4:1F:72:11:B4:D2 10G Foreman Private/ Storage
  2, Intel 82599 p3p1 A4:1F:72:11:B4:D3 10G Public
    p3p2 A4:1F:72:11:B4:D5 10G Unused
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:D7 10G Unused
    p1p2 A4:1F:72:11:B4:DA 10G Unused
Node8 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:DC 10G Foreman Admin
    em2 A4:1F:72:11:B4:DF 10G Foreman Private/ Storage
  2, Intel 82599 p3p1 A4:1F:72:11:B4:E0 10G Public
    p3p2 A4:1F:72:11:B4:E2 10G Unused
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:E4 10G Unused
    p1p2 A4:1F:72:11:B4:E7 10G Unused
Node9 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:E9 10G Foreman Admin
    em2 A4:1F:72:11:B4:EC 10G Foreman Private/ Storage
  2, Intel 82599 p3p1 A4:1F:72:11:B4:ED 10G Public
    p3p2 A4:1F:72:11:B4:EF 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B4:F1 10G Unused
    p1p2 A4:1F:72:11:B4:F3 10G Unused
Node11 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B5:03 10G Foreman Admin
    em2 A4:1F:72:11:B5:06 10G Foreman Private/ Storage
  2, Intel 82599 p3p1 A4:1F:72:11:B5:07 10G Public
    p3p2 A4:1F:72:11:B5:09 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B5:0B 10G Unused
    p1p2 A4:1F:72:11:B5:0D 10G Unused
Node12 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B5:10 10G Foreman Admin
    em2 A4:1F:72:11:B5:13 10G Foreman Private/ Storage
  2, Intel 82599 p3p1 A4:1F:72:11:B5:14 10G Public
    p3p2 A4:1F:72:11:B5:16 10G Unused
  3, TBD p1p1 A4:1F:72:11:B4:89 10G Unused
    p1p2 A4:1F:72:11:B4:8B 10G Unused

Subnet allocations

Network name Address Mask Gateway VLAN id
Fuel Admin 10.20.0.0 255.255.0.0 10.20.0.1 Untagged
Fuel Mangement 192.168.0.0 255.255.255.0 192.168.0.1 101
Fuel Storage 192.168.1.0 255.255.255.0 192.168.1.1 102
Fuel Public 172.18.0.64 255.255.255.192 172.18.0.65 Untagged
Foreman Admin 10.4.14.0 255.255.255.0 10.4.14.100 Untagged
Foreman Private 10.4.5.0 255.255.255.0 10.4.5.1 Untagged
Foreman Public 172.18.0.0 255.255.255.192 172.18.0.1 Untagged
Lights Out 172.18.0.128 255.255.255.128 172.18.0.129 Untagged

Lights out Network

POD1

Hostname Lights-out address MAC Username Password
Fuel-Jump 172.18.1.131 A4:1F:72:11:B4:80 root calvin
Node2 172.18.1.132 A4:1F:72:11:B4:8D root calvin
Node3 172.18.1.133 A4:1F:72:11:B4:9A root calvin
Node4 172.18.1.134 A4:1F:72:11:B4:A7 root calvin
Node5 172.18.1.135 A4:1F:72:11:B4:B4 root calvin
Node6 172.18.1.136 A4:1F:72:11:B4:C1 root calvin

POD2

Hostname Lights-out address MAC Username Password
Foreman-Jump 172.18.1.143 A4:1F:72:11:B5:1C root calvin
Node7 172.18.1.137 A4:1F:72:11:B4:CE root calvin
Node8 172.18.1.138 A4:1F:72:11:B4:DB root calvin
Node9 172.18.1.139 A4:1F:72:11:B4:E8 root calvin
Node11 172.18.1.141 A4:1F:72:11:B5:02 root calvin
Node12 172.18.1.142 A4:1F:72:11:B5:0F root calvin

Remote access infrastructure

The Dell OPNFV testlab is free to use for the OPNFV community.

A VPN is used to provide access to the Dell Testlab.

To access the Testlab, please contact Waqas_Riaz@DELL.com with the following details:
  • Name
  • Email
  • Designation
  • Organization
  • Purpose of using the lab

Processing the request can take 2-3 business days.

Accessing the Teslab

POD1 JumpServer

IP: 172.18.0.67 User: opnfv Passwd: d3ll1234

POD2 JumpServer

IP: 172.18.0.11 User: opnfv Passwd: d3ll1234
Dell OPNFV Testlab

Overview

Dell is hosting an OPNFV testlab at its Santa Clara facility. The testlab would host baremetal servers for the use of OPNFV community as part of the OPNFV Pharos Project

The Dell Testlab consists of 3 PODs for the use of the community
  • POD1 (Jenkins slave: dell-us-testing-bm-1)
  • POD2 (Jenkins slave: dell-us-deploying-bm2)
  • POD3 (Jenkins slave: dell-us-delpoyingbm3)
Dell Testlab Overiew
Each of the 2 PODs consists of 6 servers that consist of
  • 1 Jump Server
  • 3 Servers for Control Nodes
  • 2 Servers for Compute Nodes

Hardware details

For POD1 and POD2, the servers reside within a single Dell PowerEdge 620 chassis and have the following specifications:

POD1

Hostname Model Memory Storage Processor Socket
Jump Server Dell PowerEdge M620 64 GB 1200GB HDD Intel Xeon E5-2640 2
Node2 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node3 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node4 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node5 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2
Node6 Dell PowerEdge M620 64 GB 600GB HDD Intel Xeon E5-2640 2

POD2

Hostname Model Memory Storage Processor Socket
Jump Server Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2630 2
Node7 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node8 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node9 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node11 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2
Node12 Dell PowerEdge M620 64 GB 300GB HDD Intel Xeon E5-2640 2

POD3 consists of 6 R630 Rack servers with the following specifications:

POD3

Hostname Model Memory Storage Processor Socket
Jump Server Dell PowerEdge R630 128 GB 750GB SSD Intel Xeon E5-2698 2
Node2 Dell PowerEdge R630 128 GB 750GB SSD Intel Xeon E5-2698 2
Node3 Dell PowerEdge R630 128 GB 750GB SSD Intel Xeon E5-2698 2
Node4 Dell PowerEdge R630 128 GB 750GB SSD Intel Xeon E5-2698 2
Node5 Dell PowerEdge R630 128 GB 750GB SSD Intel Xeon E5-2698 2
Node6 Dell PowerEdge R630 128 GB 750GB SSD Intel Xeon E5-2698 2

Software

The Jump servers in the Testlab are pre-provisioned with the following softwares:

  • POD1-Jump Server:
  1. OS: Ubuntu 14.04
  • POD2-Jump Server:
  1. OS: CentOS7.1
  • POD3-Jump Server:
  1. OS: CentOS7.1

Networks

POD1

POD1-Fuel Overview
Hostname NIC Model Ports MAC BW VLANs/Roles
Jump Server 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:81 10G PXE
    em2 A4:1F:72:11:B4:84 10G Internal Networks (101-106)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:85 1G Public
    p3p2 A4:1F:72:11:B4:87 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B4:89 10G Unused
    p1p2 A4:1F:72:11:B4:8B 10G Unused
Node2 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:8E 10G PXE
    em2 A4:1F:72:11:B4:91 10G Internal Networks (101-106)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:92 1G Public
    p3p2 A4:1F:72:11:B4:94 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B4:96 10G Unused
    p1p2 A4:1F:72:11:B4:98 10G Unused
Node3 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:9B 10G PXE
    em2 A4:1F:72:11:B4:9E 10G Internal Networks (101-106)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:9F 1G Public
    p3p2 A4:1F:72:11:B4:A1 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B4:A3 10G Unused
    p1p2 A4:1F:72:11:B4:A5 10G Unused
Node4 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:A8 10G PXE
    em2 A4:1F:72:11:B4:AB 10G Internal Networks (101-106)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:AC 1G Public
    p3p2 A4:1F:72:11:B4:AE 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B4:B0 10G Unused
    p1p2 A4:1F:72:11:B4:B1 10G Unused
Node5 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:B5 10G PXE
    em2 A4:1F:72:11:B4:B8 10G Internal Networks (101-106)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:B9 1G Public
    p3p2 A4:1F:72:11:B4:BB 10G Unused
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:BD 10G Unused
    p1p2 A4:1F:72:11:B4:C0 10G Unused
Node6 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:C2 10G PXE
    em2 A4:1F:72:11:B4:C5 10G Internal Networks (101-106)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:C6 1G Public
    p3p2 A4:1F:72:11:B4:C8 10G Unused
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:CA 10G Unused
    p1p2 A4:1F:72:11:B4:CD 10G Unused

POD2

POD2 Overview
Hostname NIC Model Ports MAC BW Roles
Foreman Jump 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B5:1D 10G PXE
    em2 A4:1F:72:11:B5:20 10G Internal Networks (201-205)
  2, Intel 82599 p3p1 A4:1F:72:11:B5:21 1G Public
    p3p2 A4:1F:72:11:B5:23 10G Unused
  3, TBD p1p1 A4:1F:72:11:B4:89 10G Unused
    p1p2 A4:1F:72:11:B4:8B 10G Unused
Node7 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:CF 10G PXE
    em2 A4:1F:72:11:B4:D2 10G Internal Networks (201-205)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:D3 1G Public
    p3p2 A4:1F:72:11:B4:D5 10G Unused
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:D7 10G Unused
    p1p2 A4:1F:72:11:B4:DA 10G Unused
Node8 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:DC 10G PXE
    em2 A4:1F:72:11:B4:DF 10G Internal Networks (201-205)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:E0 1G Public
    p3p2 A4:1F:72:11:B4:E2 10G Unused
  3, Broadcom NetXtreme II BCM57810 p1p1 A4:1F:72:11:B4:E4 10G Unused
    p1p2 A4:1F:72:11:B4:E7 10G Unused
Node9 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B4:E9 10G PXE
    em2 A4:1F:72:11:B4:EC 10G Internal Networks (201-205)
  2, Intel 82599 p3p1 A4:1F:72:11:B4:ED 1G Public
    p3p2 A4:1F:72:11:B4:EF 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B4:F1 10G Unused
    p1p2 A4:1F:72:11:B4:F3 10G Unused
Node11 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B5:03 10G PXE
    em2 A4:1F:72:11:B5:06 10G Internal Networks (201-205)
  2, Intel 82599 p3p1 A4:1F:72:11:B5:07 10G Public
    p3p2 A4:1F:72:11:B5:09 10G Unused
  3, Intel 82599 p1p1 A4:1F:72:11:B5:0B 10G Unused
    p1p2 A4:1F:72:11:B5:0D 10G Unused
Node12 1, Broadcom NetXtreme II BCM57810 em1 A4:1F:72:11:B5:10 10G PXE
    em2 A4:1F:72:11:B5:13 10G Internal Networks (201-205)
  2, Intel 82599 p3p1 A4:1F:72:11:B5:14 1G Public
    p3p2 A4:1F:72:11:B5:16 10G Unused
  3, TBD p1p1 A4:1F:72:11:B4:89 10G Unused
    p1p2 A4:1F:72:11:B4:8B 10G Unused

POD3

POD3 Overview
Hostname NIC Model Ports MAC BW Roles (VLANs)
Jump Server 1, Intel 2P X520/2P I350 rNDC em1 EC:F4:BB:D7:14:20 1G PXE
    em2 EC:F4:BB:D7:14:22 10G Internal Networks (201,202,203)
    p3p1 EC:F4:BB:D7:14:24 1G Public
Node1 1, Intel 2P X520/2P I350 rNDC em1 EC:F4:BB:D6:F2:98 10G PXE
    em2 EC:F4:BB:D6:F2:9A 10G Internal Networks (201,202,203)
    p3p1 EC:F4:BB:D6:F2:9C 1G Public
Node2 1, Intel 2P X520/2P I350 rNDC em1 EC:F4:BB:D6:F9:10 1G PXE
    em2 EC:F4:BB:D6:F9:12 10G Internal Networks (201,202,203)
    p3p1 EC:F4:BB:D6:F9:14 1G Public
Node3 1, Intel 2P X520/2P I350 rNDC em1 EC:F4:BB:D7:C9:B8 1G PXE
    em2 EC:F4:BB:D7:C9:BA 10G Internal Networks (201,202,203)
    p3p1 EC:F4:BB:D7:C9:BC 1G Public
Node4 1, Intel 2P X520/2P I350 rNDC em1 EC:F4:BB:D7:16:E8 10G PXE
    em2 EC:F4:BB:D7:16:EA 10G Internal Networks (201,202,203)
    p3p1 EC:F4:BB:D7:16:EA 1G Public
Node5 1, Intel 2P X520/2P I350 rNDC em1 EC:F4:BB:D6:FE:98 1G Unused
    em2 EC:F4:BB:D6:FE:9A 10G Internal Networks (201,202,203)
    p3p1 EC:F4:BB:D6:FE:9C 1G Public

Subnet allocations

Network name Address Mask Gateway VLAN id
POD1 Public 172.18.0.64 255.255.255.192 172.18.0.65 Untagged
POD2 Public 172.18.0.0 255.255.255.192 172.18.0.1 Untagged
POD3 Public 172.18.1.0 255.255.255.0 172.18.1.1 Untagged
Lights Out 172.18.0.128 255.255.255.128 172.18.0.129 Untagged

Lights out Network

POD1

Hostname Lights-out address MAC Username Password
Jump 172.18.0.131 A4:1F:72:11:B4:80 root calvin
Node2 172.18.0.132 A4:1F:72:11:B4:8D root calvin
Node3 172.18.0.133 A4:1F:72:11:B4:9A root calvin
Node4 172.18.0.134 A4:1F:72:11:B4:A7 root calvin
Node5 172.18.0.135 A4:1F:72:11:B4:B4 root calvin
Node6 172.18.0.136 A4:1F:72:11:B4:C1 root calvin

POD2

Hostname Lights-out address MAC Username Password
Jump 172.18.0.143 A4:1F:72:11:B5:1C root calvin
Node7 172.18.0.137 A4:1F:72:11:B4:CE root calvin
Node8 172.18.0.138 A4:1F:72:11:B4:DB root calvin
Node9 172.18.0.139 A4:1F:72:11:B4:E8 root calvin
Node11 172.18.0.141 A4:1F:72:11:B5:02 root calvin
Node12 172.18.0.142 A4:1F:72:11:B5:0F root calvin

POD3

Hostname Lights-out address MAC Username Password
Jump 172.18.0.181 74:E6:E2:FA:BB:D8 root calvin
Node1 172.18.0.182 74:E6:E2:FA:E9:2E root calvin
Node2 172.18.0.183 74:E6:E2:FA:FC:E2 root calvin
Node3 172.18.0.184 74:E6:E2:FB:05:68 root calvin
Node4 172.18.0.185 74:E6:E2:FA:A4:02 root calvin
Node5 172.18.0.186 74:E6:E2:FA:E4:18 root calvin

Remote access infrastructure

The Dell OPNFV testlab is free to use for the OPNFV community.

A VPN is used to provide access to the Dell Testlab.

To access the Testlab, please visit the Dell OPNFV Lab’s wiki page (https://wiki.opnfv.org/dell_hosting) for details.

Accessing the Teslab

  • POD1 JumpServer

    IP: 172.18.0.67

    User: opnfv

    Passwd: d3ll1234

  • POD2 JumpServer

    IP: 172.18.0.11

    User: opnfv

    Passwd: d3ll1234

  • POD3 JumpServer

    IP: 172.18.1.3

    User: opnfv

    Passwd: d3ll1234

ERICSSON OPNFV Lab Configuration Files

Ericssion OPNFV Lab Specification

Introduction

Ericsson OPNFV Lab currently has 2 Bare Metal and 3 Virtual PODs available globally (hosted in the GIC). Each POD has 5 servers, comprised of 3 controller nodes (HA) and 2 computes nodes. NOTE: (this make differ depending on scenario).

These PODs are dedicated for use by Production/CI. These PODs focus on providing verification, build, deploy and testing for scenarios related with test projects, installer projects and perforamnce enhancement projects, such as KVM, OVS, FDS, etc.

In addition to the full-time CI/CD resources, the Ericsson OPNFV lab provides developer labs (DRs) for project usage, testing and development.

Scenarios services by this lab are:

Scenario defitions can be found here: Colorado Scenario Status

Lab Resources

POD Name Project(s) PTL(s) Email(s) POD Role Status Notes
POD1 CI/CD Daniel Smith daniel.smith@ericsson.com CI: latest Active BM-CI
POD2 CI/CD Daniel Smith daniel.smith@ericsson.com CI: latest Active BM-CI
vPOD1 CI/CD Fatih Degirmenci fatih.degirmenci@ericsson.com CI: latest Active Virt-CI
PHAROS-166 FUEL Constant Wette constant.wette@ericsson.com DR: B-rel Active Nested
PHAROS-167 OVSNFV Billy O’Mahoney billy.omahoney@intel.com DR: C-rel Active Hybrid
PHAROS-174 GLUON Bin Hu bh526r@att.com DR: D-rel Active Nested*
PHAROS-180 SAVI
Rick
Brunner
 richard.brunner@ericsson.com DR: D-rel Active Nested*
PHAROS-181 IPV6-MULTI
Bin
Hu
 bh526r@att.com DR: D-rel Active Nested*
PHAROS-191 AUTO-DEP
Peter
Barabas
 Peter.Barabas@ericsson.com DR: C-rel Active Nested*
PHAROS-199 SDN-L3
Tim
Irnich
 Tim.Irnich@ericsson.com DR: C-rel Active Nested*
PHAROS-236 LLT-TOOL
Jose
Lausuch
 Jose.Lausuch@ericsson.com DR: C-rel Active Nested*
PHAROS-253 ODL-II
Nikolas
Hermanns
 Nikolas.Hermanns@ericsson.com DR: C-rel Active Nested*

Acceptable Usage Policy

Resources located in Ericsson OPNFV lab shall only be used for CI, infra setup/configuration and troubleshooting purposes. No development work is allowed in these PODs. Development Work should only be performed on the DR labs assigned to individual projects.

Remote Access Infrastructure

Ericsson OPNFV lab provides a SSH GW that allows for unlimited port-forwarding, as well as Remote Desktop, VNC and SOCKS proxy capability allowing the end user to feel as though directly connected to the lab.

Remote Access Procedure

Access to this environment can be granted by sending an e-mail to: daniel.smith@ericsson.com.

Subject: ericsson opnfv access.

The following information should be provided in the request:

Full name:
E-mail:
Organization:
Why is access needed:
How long is access needed:
Number of Hosts required:
Topology Required (HA, SA):
Feature/Plugins/Options Required (DPDK, ODL, ONOS):

Enclosed a copy of your id_rsa.pub (public key) with your request and a login will be created for you

Lab Documentation

Lab Topology

Lab diagram not found

Each POD is an individual entity with its own set of independant networks allowing for interconnection between DR labs, intra connectinos within multiple Nested DRs all without touching the CI/CD running in production.

Refer to each Lab specific wiki page for IP and Login and Topology Information.

Huawei’s OPNFV Lab

Huawei’s Lab Specification

Introduction

Huawei’s lab providing 5 PODs for baremetal deployment, 4 standalone servers for virtual deployment. All the resources have been attached to jenkins master, you can view the slaves below in jenkins master. Current POD assignments and individual POD details are listed below.

Lab Resources & Assignments
Resource Project(s) POD Role Status
huawei-pod1 compass4nfv CI Stable Active
huawei-pod2 compass4nfv CI Stable Active
huawei-pod3 yardstick Dev/Test Active
huawei-pod4 compass4nfv CI Stable Active
huawei-pod5 compass4nfv CI Stable Active
huawei-virtual1 compass4nfv CI Stable Active
huawei-virtual2 compass4nfv CI Stable Active
huawei-virtual3 compass4nfv CI Stable Active
huawei-virtual4 compass4nfv CI Stable Active

Acceptable Usage Policy

All of these resources above are used for OPNFV CI, if there is any requirement by OPNFV contributor or committer for the purpose of OPNFV development, please apply to us for permission.

Remote Access Infrastructure

Huawei provides VPN(OpenVPN) to connect the lab.

Remote Access Procedure

This environment is free to use by any OPNFV contributor or committer for the purpose of OPNFV approved activities, you just need to obtain VPN credentials to access.

Access to this environment can be granted by sending a e-mail to:

Following information should be provided in the request:

  • subject: opnfv_huawei_access
  • Full name
  • e-mail
  • Phone
  • Organization
  • OPNFV Contributor/Committer name :
  • OPNFV Project(s) Association:
  • LF ID:
  • Recommended by:
  • PGP public key (preferably registered with a PGP PKI server)
  • SSH public key

Granting access normally takes 3-5 business days.

Detailed access descriptions will be provided with your access grant e-mail.

Lab Documentation

Lab Topology

Below you’ll find a topological view of the hosting set-up,you can get more detailed information from the individual POD.

OPNFV


Figure 1: Huawei lab OPNFV hosting environment overview

Huawei PODs Specification

NOTE: Illustrated by the example of huawei-pod1&huawei-virtual1.

huawei-pod1

Introduction

This is a bare metal deployment pod deployed by compass installer

Hardware
  • the pod1 consist of 6 Rack servers, the following is detail
Hostname CPU Storage Memory ipmi Mac &ip
jumpserver Intel(R) Xeon(R) CPU X5650 @ 2.67GHz 1.8TB 31G  
Host1 controller Intel(R) Xeon(R) CPU E5-2690 @ 2.90GHz 4.2TB 188G eth3:Mac F8:4A:BF:55:A2:8E ip 172.16.130.26
Host2 controller Intel(R) Xeon(R) CPU E5-2670@ 2.60GHz 6TB 188G eth3:Mac D8:49:0B:DA:5A:B8 ip 172.16.130.27
Host3 controller Intel(R) Xeon(R) CPU E5-2670@ 2.60GHz 8.4TB 188G eth3:Mac 78:D7:52:A0:B1:9D ip 172.16.130.29
Host4 compute Intel(R) Xeon(R) CPU E5-2670@ 2.60GHz 7.2TB 188G eth3:Mac D8:49:0B:DA:5B:5E ip 172.16.130.30
Host5 compute Intel(R) Xeon(R) CPU E5-2670@ 2.60GHz 4.8TB 188G eth3:Mac D8:49:0B:DA:56:86 ip 172.16.130.31
  • 1 Huawei S9300 10G switch for storage, management and public traffic - 2x10GE to each server.
  • 1 Huawei S5300 1G switch for installing and Lights+out management traffic - 2x1GE to each server.
  • 1 VPN concentrator for remote access and management.
  • 1 Huawei firewall and router for public network secure access.
huawei-pod1 Topology
OPNFV


Figure 1: Huawei lab pod1 topology

huawei-pod1 Network

Below you’ll find a topological view of the huawei-Pod1 set-up:

OPNFV


Figure 2: Full Pod network configuration

huawei-virtual1

Introduction

This is a virtual deployment POD deployed by compass installer

Hardware

virtual pod consist of one standalone server

name huawei-virtual1
CPU Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Memory 251G
Storage 4TB
IP 192.168.107.2
Network

Below you’ll find a topological view of the huawei-virtual1 Pod set-up:

OPNFV


Figure 3: virtual deployment pod network configuration

OOL OPNFV Testbed

Lab: OOL OPNFV Testbed

Introduction

Okinawa Open Laboratory (OOL) provides the following facilities for OPNFV testing. The testlab is now located only at Okinwa in Japan.

Lab Resources

POD Name Project(s) Project Lead(s) Email(s) POD Role Status Notes
ool-pod1       CI stable Available  
ool-virtual1 Doctor Ryota Mibu r-mibu@cq.jp.nec.com CI review Assigned  

Acceptable Usage Policy

These resources provided to OPNFV are free to use by any OPNFV contributor or committer for the purpose of OPNFV approved activities by permission of the operator, but shall be used for CI, infra setup/configuration and troubleshooting purposes.

Remote Access Infrastructure

OOL provide VPN(OpenVPN) to connect this testlab.

Remote Access Procedure

Access to this environment can be granted by sending a e-mail to: TBD

subject: opnfv_access_ool

Following information should be provided in the request:

  • Full name
  • e-mail
  • Phone
  • Organization
  • Resources required
  • How long is access needed
  • PGP public key
  • SSH public key

Granting access normally takes 2-3 business days.

Detailed access descriptions will be provided with your access grant e-mail.

Lab Documentation

Lab Topology

not found

POD: ool-pod1

Introduction

This is a physical POD deployed by Fuel installer (Brahmputra).

Additional Requirements

Server Specifications

Jump Host

Hostname Vendor Model Serial Number CPUs Memory Storage
OPNFV-jump SuperMicro SYS-5018R-WR
E5-2630v3 x1 32 GB SATA 7.2krpm 2TB x1
Hostname Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
OPNFV-jump
IF0: 0c:c4:7a:6c:a2:b2 VLAN untagged Public IF1: 0c:c4:7a:6c:a2:b3 VLAN 10{2-5} Admin/Mgmt/Private   NIC Model: Intel I350

Compute Nodes

Hostname Vendor Model Serial Number CPUs Memory Storage
node-9 FUJITSU RX2530 M1
E5-2630v3 x1 32 GB SATA 7.2krpm 2TB x2 SSD 100GB x1
node-10 FUJITSU RX2530 M1
E5-2630v3 x1 32 GB SATA 7.2krpm 2TB x2 SSD 100GB x1
node-11 FUJITSU RX2530 M1
E5-2630v3 x1 32 GB SATA 7.2krpm 2TB x2 SSD 100GB x1
node-12 FUJITSU RX2530 M1
E5-2630v3 x1 32 GB SATA 7.2krpm 2TB x2 SSD 100GB x1
Hostname Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
node-9
IF0: 90:1b:0e:6b:e8:a8 VLAN untagged Admin IF1: 90:1b:0e:6b:e8:a9 VLAN untagged Mgmt IF2: 90:1b:0e:6b:e8:aa VLAN untagged Public IF3: 90:1b:0e:6b:e8:ab VLAN untagged Private IF4: 90:1b:0e:6d:09:71 VLAN untagged Storage IF5: 90:1b:0e:6d:09:72 VLAN untagged Storage NIC Models: (1GbE) Emulex Skyhawk (10GbE) Intel 82599E
node-10
IF0: 90:1b:0e:6b:e3:00 VLAN untagged Admin IF1: 90:1b:0e:6b:e3:01 VLAN untagged Mgmt IF2: 90:1b:0e:6b:e3:02 VLAN untagged Public IF3: 90:1b:0e:6b:e3:03 VLAN untagged Private IF4: 90:1b:0e:6d:09:5f VLAN untagged Storage IF5: 90:1b:0e:6d:09:60 VLAN untagged Storage NIC Models: (1GbE) Emulex Skyhawk (10GbE) Intel 82599E
node-11
IF0: 90:1b:0e:6b:e5:b4 VLAN untagged Admin IF1: 90:1b:0e:6b:e5:b5 VLAN untagged Mgmt IF2: 90:1b:0e:6b:e5:b6 VLAN untagged Public IF3: 90:1b:0e:6b:e5:b7 VLAN untagged Private IF4: 90:1b:0e:6d:09:6f VLAN untagged Storage IF5: 90:1b:0e:6d:09:70 VLAN untagged Storage NIC Models: (1GbE) Emulex Skyhawk (10GbE) Intel 82599E
node-12
IF0: 90:1b:0e:6b:e2:bc VLAN untagged Admin IF1: 90:1b:0e:6b:e2:bd VLAN untagged Mgmt IF2: 90:1b:0e:6b:e2:be VLAN untagged Public IF3: 90:1b:0e:6b:e2:bf VLAN untagged Private IF4: 90:1b:0e:6d:08:31 VLAN untagged Storage IF5: 90:1b:0e:6d:08:32 VLAN untagged Storage NIC Models: (1GbE) Emulex Skyhawk (10GbE) Intel 82599E

Switches

Node Hardware
Switch 1 (for each network except storage) Juniper EX3300-24T
Switch 2 (for storage) Mellanox SX1024

Subnet Allocations

Network name Address Mask Gateway VLAN id
Public 192.168.25.0 255.255.255.0 192.168.25.254 103
Fuel Admin 192.168.103.0 255.255.255.0 192.168.103.1 103
Fuel Mangement 192.168.104.0 255.255.255.0 192.168.104.1 104
Fuel Public 192.168.105.0 255.255.255.0 192.168.105.1 105
Fuel Private 192.168.106.0 255.255.255.0   Untagged
Fuel Storage 192.168.107.0 255.255.255.0   Untagged

VPN Users

Name Email Project Role Notes
Ryota Mibu r-mibu@cq.jp.nec.com Doctor Project Lead  

Firewall Rules

Port(s) Service Notes
     

POD Topology

not found

POD: ool-virtual1

Introduction

This is a virtual POD deployed by Apex installer (master/Colorado). This POD is built on one machine placed next to machines of the physical POD (ool-pod1). Controller and compute nodes are VM.

Additional Requirements

Server Specifications

Jump Host

See Server Specifications.

Compute Nodes

Machine Hostname Hardware
Virtual POD ool-virtual1 FUJITSU PRIMERGY RX2530 M1
FUJITSU PRIMERGY RX2530 M1
CPU Xeon E5-2630v3 x1
RAM 32GB
HDD SATA 7.2krpm 2TB x2
SSD 100GB x1
1000BASE-T Emulex Skyhawk x2
10GBASE-T Intel 82599E x2
BMC
x1
Hostname IF# BW MAC IF in OS Role
ool-virtual1 IF0 1Gb 90:1b:0e:6b:e5:d8 eno1 Admin
ool-virtual1 IF1 1Gb 90:1b:0e:6b:e5:d9 eno2 Mgmt
ool-virtual1 IF2 1Gb 90:1b:0e:6b:e5:da eno3 Public
ool-virtual1 IF3 1Gb 90:1b:0e:6b:e5:db eno4 Private
ool-virtual1 IF4 1Gb 90:1b:0e:6d:08:f5 ens2f0 Storage
ool-virtual1 IF5 1Gb 90:1b:0e:6d:08:f6 ens2f1 Storage

Subnet Allocations in the host

Network name Address Mask Gateway VLAN id
Admin 192.0.2.0 255.255.255.0 192.168.103.1 Untagged
Public 192.168.37.0 255.255.255.0 192.168.105.1 Untagged
Private 11.0.0.0 255.255.255.0   Untagged
Storage 12.0.0.0 255.255.255.0   Untagged

VPN Users

Name Email Project Role Notes
Ryota Mibu r-mibu@cq.jp.nec.com Doctor Project Lead  

Firewall Rules

Port(s) Service Notes
     

POD Topology

OOL Inventory File

import pod1_inventory.yaml

Orange Paris Pharos Lab and Configuration Files

Lab Specification Template

Introduction

Orange is hosting an OPNFV test lab at Chatillon (near Paris) facility. The test lab would host baremetal servers for the use of OPNFV community as part of the OPNFV Pharos Project.

The Orange Paris lab consist of 1 POD
  • POD for Fuel

Lab Resources

POD Name Project(s) Project Lead(s) Email(s) POD Role Status Notes
opnfv-integ       Dev/test Active  
  • POD Name: Use consistent naming / numbering to avoid confusion. Hyperlinked to POD description.
  • POD Role: CI stable, CI latest, Dev/test, Stand-alone, Virtual, ...
  • Status: Assigned, Configuring, Active, Troubleshooting, Available, ...

Acceptable Usage Policy

Define lab user policies and expectations

Remote Access Infrastructure

The Orange Paris OPNFV test lab is free to use for the OPNFV community.

A VPN is used to provide access to the Orange Paris Testlab.

To access the Testlab, please contact Auboin Cyril (cyril.auboin@orange.com) with the following details: * Name

  • Organization
  • Purpose of using the labs
  • Dates start / end

Processing the request can take 3-4 business days.

Remote Access Procedure

Define lab process for requesting access to the lab (e.g. VPN guide, how to modify BIOS settings, etc.)

Lab Documentation

List lab specific documents here

Lab Topology

Provide a diagram showing the network topology of lab including lights-out network. Any security sensitive details should not be exposed publically. The following diagram is an example only.

Lab diagram not found

POD Specification Template

Introduction

Orange is hosting an OPNFV test lab at Chatillon (near Paris) facility. The test lab would host 4 (1 controller and 3 computes) baremetal servers for the use of OPNFV community as part of the OPNFV Pharos Project.

Version: Brahmaputra Installer: Fuel (with Ceph)

Additional Requirements

Server Specifications

Switch

Hostname Vendor Model Serial Number CPUs Memory Local storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
pod1- switch JUNIPER EX-4550 750-045407       172.31.2.254 CC:E1:7F:86:38:80     32 ports

Jump Host

Hostname Vendor Model Serial Number CPUs Memory Local storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
pod1- jump-host DELL Proliant DL 360e Gen8 CZJ40901PV
Intel Xeon

E5-2430 v2.2 2,5Ghz 24 core

 16 GB 300GB SAS 300GB SAS   IF0: 172.31.13.5    

Firewall

Hostname Vendor Model Serial Number CPUs Memory Local storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
pod1- firewall IBM @Server xSerie 336 KKTVY4M Intel Xeon 4 GB 36GB SATA 36GB SATA   IF0: 161.105.211.2    

Controller Node

Hostname Vendor Model Serial Number CPUs Memory Local storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
pod1-ctrl1 HP Proliant DL 360e Gen8 CZJ40901PT
Intel Xeon
E5-2430 v2.2
2,5Ghz 24 core
 16GB 300GB SAS 300GB SAS  
IF0: 9C:B6:54:95:E4:74
Admin
IF1: 9C:B6:54:95:E4:75
18: Public 1500: Storage 17: Management 1502: Private
    

Compute Nodes

Hostname Vendor Model Serial Number CPUs Memory Local storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
pod1-node1 DELL R730 8F3J642

Intel Xeon E5-2603 v3

1,6Ghz 12 core
 128GB (8x16GB) 1600Mhz 250GB SATA 480GB SSD 480GB SSD  
IF0: EC:F4:BB:CB:62:9C
Admin
IF1: EC:F4:BB:CB:62:9A
18: Public 1500: Storage 17: Management 1502: Private
    
pod1-node2 HP Proliant DL 360e Gen8 CZJ40901PS
Intel Xeon
E5-2430 v2.2
2,5Ghz 24 core
 16GB 300GB SAS 300GB SAS  
IF0: 9C:B6:54:95:D4:F0
Admin
IF1: 9C:B6:54:95:D4:F1
18: Public 1500: Storage 17: Management 1502: Private
    
pod1-node3 DELL R730 FG3J642

Intel Xeon E5-2603 v3

1,6Ghz 12 core
 128GB (8x16GB) 1600Mhz 256GB SATA 480GB SSD 480GB SSD  
IF0: EC:F4:BB:CB:62:E4
Admin
IF1: EC:F4:BB:CB:62:E2
18: Public 1500: Storage 17: Management 1502: Private
    

Users

Name Email Company Role Notes
         

Firewall Rules

Port(s) Service Note
22, 43, 80 Jenkins CI  

POD Topology

Provide a diagram showing the network topology of the POD. Any security sensitive details should not be exposed publically and can be stored in the secure Pharos repo. The following diagram is an example only.

POD diagram not found

Spirent Virtual Cloud Test Lab

A community provided metal resource hosted at Nephoscale, leveraged for SDN/NFV public testing and OpenDaylight, OpenStack, OPNFV projects.

Spirent VCT Lab is currently working on 3 different OpenStack environments each one of them deployed on different hardware configuration:

  • OpenStack Juno - 2014.2.2 release (CentOS 7, 20 Cores, 64 GB RAM, 1 TB SATA, 40 Gbps)
  • OpenStack Juno - 2014.2.2 release (Ubuntu 14.04, 8 cores, 32 GB RAM, 500 GB SATA, 10 Gbps)
  • OpenStack Icehouse - 2014.1.3 release
  • OpenStack Icehouse - 2014.1.3 release

There are a number of different networks referenced in the VPTC Design Blueprint.

  • Public Internet – 1 g
  • Private Management – 1g
  • Mission Clients – 10g
  • Mission Servers – 10g

These can be added or removed as specified by the test methodology. There are 8 x 10 gige SFP+ ports available on a typical C100MP used for Avalanche Layer 4-7 testing. The N4U offers 2 x 40 gige QSFP+ ports with the MX-2 Spirent Test Center Layer 2-3 testing. There are 2 x Cumulus switches with 32 ports of 40 gige QSFP+ ports for a total capacity of 256 ports of 10 gige. We use QSFP+ to SFP+ break out cables to convert a single 40 gige port into 4 x 10 gige ports. Together these offer a flexible solution to allow up to 8 simultaneous tests to take place with physical traffic generators at the same time. Assuming a 10 to 1 oversubscription ratio we could handle 80 community users with the current environment.

For example:

  • An 80 Gbps test would need 4 port pairs of 10 gige each and require 8 mission networks.
  • Multiple clients sharing common test hardware might have dedicated management networks for their DUTs yet communicate with the APIs and Management services via a shared DMZ network protected by a firewall.
  • SSL and IPSec VPN will typically be leveraged to connect networks across the untrusted Internet or other third party networks.
  • Stand-alone DUT servers using STCv and AVv traffic generators could easily scale to hundreds of servers as needed.
_images/spirent_vptc-public-drawing.png

ZTE SH Pharos Lab Configuration Files

ZTE SH Lab Specification

Introduction

ZTE SH Pharos lab currently has three PODs available in Shanghai. Each POD has 5 servers, 3 controller nodes and 2 computer nodes. These PODs are dedicated for use by Production/CI. These PODs focus scenarios related with test projects, installer projects and performance enhancement projects, such as KVM, OVS, FDS, etc.

Scenarios planned are list here:

  • os-nosdn-kvm-ha
  • os-nosdn-kvm_ovs-ha

Scenarios are defined in Colorado Scenario Status

Lab Resources

POD Name Project(s) PTL(s) Email(s) POD Role Status Notes
POD1 FUEL Gregory Elkinbard gelkinbard@mirantis.com CI: latest Active Yardstick Funtest Doctor Parser
POD2 FUEL Gregory Elkinbard gelkinbard@mirantis.com CI: latest Active Qtip
POD3 FUEL Gregory Elkinbard gelkinbard@mirantis.com CI: latest Active NFV-KVM OVSNFV

Acceptable Usage Policy

Resources located in OPNFV ZTE SH lab shall only be used for CI, infra setup/configuration and troubleshooting purposes. No development work is allowed in these PODs.

Remote Access Infrastructure

ZTE SH lab provide the OpenVPN access for you.

Remote Access Procedure

Access to this environment can be granted by sending an e-mail to: yangyang1@zte.com.cn.

Subject: opnfv zte-pod[1-3] access.

The following information should be provided in the request:

Full name:
E-mail:
Organization:
Why is access needed:
How long is access needed:
What specific Host will be accessed:
What support is needed from zte admin:

Once access requirment is approved, the instructions for setting up VPN access will be send to you by mail.

Lab Documentation

Lab Topology

Lab diagram not found

All the PODs share the same Jump Host for only one public IP address is allocated for ZTE Pharos Lab. Deploy servers are separated from Jump Host. Each POD has itsown Deploy Server.

Jump Host

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Rabbit HP 5500
X5647x2 24 250GB SAS 2 TB HDD IF0: a0:36:9f:00:11:34/ 192.168.1.1/ native vlan/OA IF1: a0:36:9f:00:11:35/ 172.10.0.1/ vlan 103/Public 172.20.0.1/ vlan 113/Public 172.60.0.1/ vlan 163/Public 172.70.0.1/ vlan 173/Public IF2: a0.36:9:00:11:37/ 116.228.53.183/ native vlan/ Internet    

ZTE POD1 Specification

Introduction

POD1(means ZTE-POD1) uses Fuel as the installer and performs os-odl_l2-nofeature-ha CI latest verification. Currently, test projects such as Yardstick, Functest are performing daily CI tasks. Fueature projects such as Doctor, Parser will perform daily and verify CI tasks.

Additional Requirements

Server Specifications

Jump Host

POD1 share the same Jump Host in the lab.

Deploy server

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Jellyfish ZTE R5300 277662500093 E5-2620x2 128 600GB SAS 4 TB HDD IF0: 74:4a:a4:00:91:b3/ 10.20.6.1/ native vlan/PXE IF1: 74:4a:a4:00:91:b4/ 10.20.7.1/ native vlan/PXE    

Nodes/Servers

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
node1 ZTE E9000 701763100025 E5-2650x2 128 600GB*2 HDD 192.168.1.101 74:4a:a4:00:cf:d9 zteroot/superuser ens4f0: 74:4a:a4:00:cf:dc native vlan 160/PXE ens12f0: 74:4a:a4:00:b0:e1 vlan 161/ management ens12f1: 74:4a:a4:00:b0:e2 vlan 162/ storage ens44f0: 74:4a:a4:00:b0:dd vlan 1120/ private ens44f1: 74:4a:a4:00:b0:de vlan 163/ public  
node2 ZTE E9000 701763100224 E5-2650x2 128 600GB*2 HDD 192.168.1.102 74:4a:a4:00:ce:cb zteroot/superuser ens4f0: 74:4a:a4:00:ce:ce native vlan 160/PXE ens12f0: 74:4a:a4:00:d6:ad vlan 161/ management ens12f1: 74:4a:a4:00:d6:ae vlan 162/ storage ens44f0: 74:4a:a4:00:d6:a9 vlan 1120/ private ens44f1: 74:4a:a4:00:d6:aa vlan 163/ public  
node3 ZTE E9000 701763100064 E5-2650x2 128 600GB*2 HDD 192.168.1.103 74:4a:a4:00:cf:55 zteroot/superuser ens4f0: 74:4a:a4:00:cf:58 native vlan 160/PXE ens12f0: 74:4a:a4:00:d6:ab vlan 161/ management ens12f1: 74:4a:a4:00:d6:ac vlan 162/ storage ens44f0: 74:4a:a4:00:d6:af vlan 1120/ private ens44f1: 74:4a:a4:00:d6:b0 vlan 163/ public  
node4 ZTE E9000 289842100103 E5-2650x2 128 600GB*2 HDD 192.168.1.104 74:4a:a4:00:49:81 zteroot/superuser ens4f0: 74:4a:a4:00:49:84 native vlan 160/PXE ens12f0: 74:4a:a4:00:b1:a5 vlan 161/ management ens12f1: 74:4a:a4:00:b1:a6 vlan 162/ storage ens44f0: 74:4a:a4:00:b1:b1 vlan 1120/ private ens44f1: 74:4a:a4:00:b1:b2 vlan 163/ public  
node5 ZTE E9000 701763100220 E5-2650x2 128 600GB*2 HDD 192.168.1.105 74:4a:a4:00:ce:bf zteroot/superuser ens4f0: 74:4a:a4:00:ce:c2 native vlan 160/PXE ens12f0: 74:4a:a4:00:d6:8d vlan 161/ management ens12f1: 74:4a:a4:00:d6:8e vlan 162/ storage ens44f0: 74:4a:a4:00:d6:9b vlan 1120/ private ens44f1: 74:4a:a4:00:d6:9c vlan 163/ public  

Subnet allocations

Network name Address Mask Gateway VLAN id
Public 172.60.0.0 255.255.255.0 172.60.0.1 163
Fuel Admin/PXE 10.20.6.0 255.255.255.0 10.20.6.2 native vlan 160
Fuel Mangement 192.168.61.0 255.255.255.0   161
Fuel Storage 192.168.62.0 255.255.255.0   162

VPN Users

Name Email Project Role Notes
         

Firewall Rules

Port(s) Service Note
1194(OpenVPN) Jenkins  

POD Topology

POD diagram not found

ZTE POD2 Specification

Introduction

POD2(means ZTE-POD2) uses Fuel as the installer and performs os-odl_l2-nofeature-ha CI latest verification. Qtip daily CI task will be migrated from POD1 to POD2. Qtip is also working on integration with Yardstick umbrella project.

Additional Requirements

Server Specifications

Jump Host

POD2 share the same Jump Host in the lab.

Deploy Server

POD2 share the same Deploy Server with POD1.

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Jellyfish ZTE R5300 277662500093 E5-2620x2 128 600GB SAS 4 TB HDD IF0: 74:4a:a4:00:91:b3/ 10.20.6.1/ native vlan/PXE IF1: 74:4a:a4:00:91:b4/ 10.20.7.1/ native vlan/PXE    

Nodes/Servers

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
node1 ZTE E9000 701763100114 E5-2650x2 128 600GB*2 HDD 192.168.1.106 74:4a:a4:00:cd:6f zteroot/superuser ens4f0: 74:4a:a4:00:cd:72 native vlan 170/PXE ens12f0: 74:4a:a4:00:b0:e9 vlan 171/ management ens12f1: 74:4a:a4:00:b0:ea vlan 172/ storage ens44f0: 74:4a:a4:00:b0:eb vlan 1130/ private ens44f1: 74:4a:a4:00:b0:ec vlan 173/ public  
node2 ZTE E9000 701360500105 E5-2650x2 128 600GB*2 HDD 192.168.1.107 74:4a:a4:00:ca:c9 zteroot/superuser ens4f0: 74:4a:a4:00:ca:cc native vlan 170/PXE ens12f0: 74:4a:a4:00:d6:a3 vlan 171/ management ens12f1: 74:4a:a4:00:d6:a4 vlan 172/ storage ens44f0: 74:4a:a4:00:d6:99 vlan 1130/ private ens44f1: 74:4a:a4:00:d6:9a vlan 173/ public  
node3 ZTE E9000 701360500026 E5-2650x2 128 600GB*2 HDD 192.168.1.108 74:4a:a4:00:cd:0f zteroot/superuser ens4f0: 74:4a:a4:00:cd:12 native vlan 170/PXE ens12f0: 74:4a:a4:00:d6:9d vlan 171/ management ens12f1: 74:4a:a4:00:d6:9e vlan 172/ storage ens44f0: 74:4a:a4:00:d3:15 vlan 1130/ private ens44f1: 74:4a:a4:00:d3:16 vlan 173/ public  
node4 ZTE E9000 701763100099 E5-2650x2 128 600GB*2 HDD 192.168.1.109 74:4a:a4:00:cf:3d zteroot/superuser ens4f0: 74:4a:a4:00:cf:40 native vlan 170/PXE ens12f0: 74:4a:a4:00:d6:a5 vlan 171/ management ens12f1: 74:4a:a4:00:d6:a6 vlan 172/ storage ens44f0: 74:4a:a4:00:d6:a7 vlan 1130/ private ens44f1: 74:4a:a4:00:d6:a8 vlan 173/ public  
node5 ZTE E9000 701763100018 E5-2650x2 128 600GB*2 HDD 192.168.1.110 74:4a:a4:00:ce:d1 zteroot/superuser ens4f0: 74:4a:a4:00:ce:d4 native vlan 170/PXE ens12f0: 74:4a:a4:00:d2:c3 vlan 171/ management ens12f1: 74:4a:a4:00:d2:c4 vlan 172/ storage ens44f0: 74:4a:a4:00:d2:c1 vlan 1130/ private ens44f1: 74:4a:a4:00:d2:c2 vlan 173/ public  

Subnet allocations

Network name Address Mask Gateway VLAN id
Public 172.70.0.0 255.255.255.0 172.70.0.1 173
Fuel Admin 10.20.7.0 255.255.255.0 10.20.7.1 native vlan 170
Fuel Mangement 192.168.71.0 255.255.255.0   171
Fuel Storage 192.168.72.0 255.255.255.0   172

VPN Users

Name Email Project Role Notes
         

Firewall Rules

Port(s) Service Note
1194(OpenVPN) Jenkins  

POD Topology

POD diagram not found

ZTE SH POD3 Specification

Introduction

POD3(means ZTE-POD3) uses Fuel as the installer and performs os-nosdn-kvm-ha CI latest verification. Feature projects like NFV-KVMV, OVSNFV will be run in this POD.

Additional Requirements

Server Specifications

Jump Host

POD3 share the same Jump Host in the lab.

Deploy Server

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
Spider ZTE R5300 210077307607 E5-2609x1 32 600GB SAS 1.2TB SCSI IF0: 74:4a:a4:00:21:0b/ 10.20.0.1/ native vlan/PXE IF1: 74:4a:a4:00:21:0c/ 10.20.1.1/ native vlan/PXE    

Compute Nodes

Hostname Vendor Model Serial Number CPUs Memory (GB) Local Storage Lights-out network (IPMI): IP/MAC, U/P 1GbE: NIC#/IP MAC/VLAN/Network 10GbE: NIC#/IP MAC/VLAN/Network Notes
node1 ZTE E9000 289016500203 E5-2670x2 64 600GB HDD 192.168.1.32 0c:12:62:e4:bf:de zteroot/superuser   enp2s0f0: 74:4a:a4:00:0b:85 vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:0b:86 vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:0b:87 vlan 102/ storage enp132s0f1: 74:4a:a4:00:0b:88 vlan 103/ public vlan 1020/ private  
node2 ZTE E9000 289016500197 E5-2670x2 64 600GB HDD 192.168.1.33 0C:12:62:E4:C0:33 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:5d vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:5e vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:5f vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:60 vlan 103/ public vlan 1020/ private  
node3 ZTE E9000 289016500003 E5-2670x2 64 600GB HDD 192.168.1.34 74:4A:A4:00:30:93 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:35 vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:36 vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:37 vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:38 vlan 103/ public vlan 1020/ private  
node4 ZTE E9000 289016500105 E5-2670x2 64 600GB HDD 192.168.1.35 0C:12:62:E4:C0:42 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:69 vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:6a vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:6b vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:6c vlan 103/ public vlan 1020/ private  
node5 ZTE E9000 289016500195 E5-2670x2 64 600GB HDD 192.168.1.36 74:4A:A4:00:30:43 zteroot/superuser   enp2s0f0: 74:4a:a4:00:5c:6d vlan 100/ Admin(PXE) enp2s0f1: 74:4a:a4:00:5c:6e vlan 101/ mgmt enp132s0f0: 74:4a:a4:00:5c:6f vlan 102/ storage enp132s0f1: 74:4a:a4:00:5c:70 vlan 103/ public vlan 1020/ private  

Subnet allocations

Network name Address Mask Gateway VLAN id
Public 172.10.0.0 255.255.255.0 172.10.0.1 103
Fuel Admin/PXE 10.20.0.0 255.255.255.0 10.20.0.1 native valn 100
Fuel Mangement 192.168.11.0 255.255.255.0   101
Fuel Storage 192.168.12.0 255.255.255.0   102

VPN Users

Name Email Project Role Notes
         

Firewall Rules

Port(s) Service Note
5000(OpenVPN) Jenkins  

POD Topology

POD diagram not found