OVSNFV Specs¶
1. High Priority Traffic Path¶
https://wiki.opnfv.org/display/ovsnfv/OVSFV+Requirement+-+High+Priority+Traffic+Path
1.1. Problem description¶
A network design may need to adequately accommodate multiple classes of traffic, each class requiring different levels of service in critical network elements.
As a concrete example, a network element managed by a service provider may be handling voice and elastic data traffic. Voice traffic requires that the end-to-end latency and jitter is bounded to some numerical limit (in msec) accuracy in order to ensure sufficient quality-of-service (QoS) for the participants in the voice call. Elastic data traffic does not impose the same demanding requirements on the network (there will be essentially no requirement on jitter. For example, when downloading a large file across the Internet, although the bandwidth requirements may be high there is usually no requirement that the file arrives within a bounded time interval.
Depending on the scheduling algorithms running on the network element, frames belonging to the data traffic may get transmitted before frames belonging to the voice traffic introducing unwanted latency or jitter. Therefore, in order to ensure deterministic latency and jitter characteristics end-to-end, each network element through which the voice traffic traverses must ensure that voice traffic is handled deterministically.
Hardware switches have typically been designed to ensure certain classes of traffic can be scheduled ahead of other classes and are also over-provisioned which further ensures deterministic behavior when handling high priority traffic. However, software switches (which includes virtual switches such as Open vSwitch) may require modification in order to achieve this deterministic behavior.
1.1.1. Use Cases¶
- Program classes of service
The End User specifies a number of classes of service. Each class of service will be represented by the value of a particular field in a frame. The class of service determines the priority treatment which flows in the class will receive, while maintaining a relative level of priority for other classes and a default level of treatment for the lowest priority class of service. As such, each class of service will be associated with a priority. The End User will associate classes of service and priorities to ingress ports with the expectation that frames that arrive on these ingress ports will get scheduled following the specified priorities.
Note: Priority treatment of the classes of service cannot cause any one of the classes (even the default class) from being transferred at all. In other words, a strict priority treatment would likely not be successful for serving all classes eventually, and this is a key consideration.
- Forward high priority network traffic
A remote network element sends traffic to Open vSwitch. The remote network element, indicates the class of service to which this flow of traffic belongs to by modifying a pre-determined but arbitrary field in the frame as specified in Use Case 1. Some examples include the Differentiated Services Code Point (DSCP) in an IP packet or the Priority Code Point (PCP) in an Ethernet frame. The relative priority treatment that frames get processed by Open vSwitch can be guaranteed by the values populated in these fields when the fields are different. If the fields are the same, ordering is not deterministic.
For example: Packet A is sent with a DSCP value of 0 and packet B is sent with a value of 46; 0 has a lower priority than 46. Packet A arrives before packet B. If Open vSwitch has been configured as such, Packet B will be transmitted before Packet A.
1.2. Proposed change¶
TBD
1.2.1. Alternatives¶
TBD
1.2.2. OVSDB schema impact¶
TBD
1.2.3. User interface impact¶
TBD
1.2.4. Security impact¶
TBD
1.2.5. Other end user impact¶
TBD
1.2.6. Performance Impact¶
TBD
1.2.7. Other deployer impact¶
TBD
1.2.8. Developer impact¶
TBD
1.3. Implementation¶
1.3.1. Assignee(s)¶
Who is leading the writing of the code? Or is this a blueprint where you’re throwing it out there to see who picks it up?
If more than one person is working on the implementation, please designate the primary author and contact.
- Primary assignee:
- <email address>
- Other contributors:
- <email address>
1.3.2. Work Items¶
TBD
1.4. Dependencies¶
TBD
1.5. Testing¶
In order to test how effectively the virtual switch handles high priority traffic types, the following scheme is suggested.:
+---------------------------+ Ingress Traffic Parameters
| | +-------------------------------------------+
| |
| | Packet Size: The size of the Ethernet frames
| |
| | Tmax: RFC2544 Max. Throughput for traffic of
| PHY0 <-------+ "Packet Size"
| |
| | Total Offered Rate: The offered rate of both
| | traffic classes combined expressed as a % of
| | Tmax
| |
| | Ingress Rates are expressed as a percentage
| | of Total Offered Rate.
| |
| | Class A:
| OVS | Ethernet PCP = 0 (Background)
| (BR0) | Ingress Rate : rate_ingress_a(n) Mfps
| |
| | Class B:
| | Ethernet PCP = 7 (Highest)
| | Ingress Rate : rate_ingress_b(n) Mfps
| |
| | Egress Traffic Measurements
| | +-------------------------------------------+
| | Class A:
| | Egress Throughput : rate_egress_a(n) Mfps
| | Egress Latency : max_lat_egrees_a(n) ms
| | Egress Jitter : max_jit_egress_a(n) ms
| PHY1 +------->
| | Class B:
| | Egress Throughput : rate_egress_b(n) Mfps
| | Egress Latency : max_lat_egrees_b(n) ms
+---------------------------+ Egress Jitter : max_jit_egress_b(n) ms
Open vSwitch is configured to forward traffic between two ports agnostic to the traffic type. For example, using the following command:
ovs-ofctl add-flow br0 in_port=0,actions=output:1
The test will be carried out with the functionality to enable high-priority traffic enabled and disabled in order to guage the change in performance for both cases.
Two classes of traffic will be generated by a traffic generator. In the example above, the classes are differentiated using the Ethernet PCP field. However, another means for differentiating traffic could be used, depending the prioritization scheme that is developed.
Tests should be performed for each combination of:
- Packet Sizes in (64, 512)
- Total Offered Rate in (80, 120, 150)
- rate_ingress_b(n) / rate_ingress_a(n) in (0.1, 0.2, 0.5)
For each set, the following metrics should be collected for each traffic class over a specified time period:
Egress Throughput (Mfps) Maximum Egress Latency (ms) Maximum Egress Jitter (ms)
1.6. Documentation Impact¶
TBD
1.7. References¶
Please add any useful references here. You are not required to have any reference. Moreover, this specification should still make sense when your references are unavailable. Examples of what you could include are:
- Links to mailing list or IRC discussions
- http://lists.opnfv.org/pipermail/opnfv-tech-discuss/2015-December/007193.html
- http://ircbot.wl.linuxfoundation.org/meetings/opnfv-ovsnfv/2016/opnfv-ovsnfv.2016-03-07-13.01.html
- Links to relevant research, if appropriate
- Related specifications as appropriate
- Anything else you feel it is worthwhile to refer to
