<<<<<<< HEAD

>>>>>>> 011d936... Update the docs folder Gap Analysis of High Availability =======================================

Contents:

1. Introduction:

During the Colorado release the OPNFV availability team has reviewed a number of gaps in support for high availability in various areas of OPNFV. The focus and goal was to find gaps and work with the various open source communities( OpenStack as an example ) to develop solutions and blueprints. This would enhance the overall system availability and reliability of OPNFV going forward. We also worked with the OPNFV Doctor team to ensure our activities were coordinated. In the next releases of OPNFV the availability team will update the status of open gaps and continue to look for additional gaps.

2. Summary of findings:

1. Publish health status of compute node - this gap is now closed through and OpenStack blueprint in Mitaka

2. Health status of compute node - some good work underway in OpenStack and with the Doctor team, we will continue to monitor this work.

3. Store consoleauth tokens to the database - this gap can be address through changing OpenStack configurations

4. Active/Active HA of cinder-volume - active work underway in Newton, we will monitor closely

5. Cinder volume multi-attachment - this work has been completed in OpenStack - this gap is now closed

6. Add HA tests into Fuel - the Availability team has been working with the Yardstick team to create additional test case for the Colorado release. Some of these test cases would be good additions to installers like Fuel.

3. Detailed explanation of the gaps and findings:

3.1. GAP 1: Publish the health status of compute node

• Type: ‘reliability’

• Description:

  Current compute node status is only kept within nova. However, NFVO and VNFM may also need these information. For example, NFVO may trigger scale up/down based on the status. VNFM may trigger evacuation. In the meantime, in the high availability scenarios, VNFM may need the host status info from the VIM so that it can figure out what the failure exactly located. Therefore, these info need to be published outside to the NFVO and VNFM.

• Desired state
  • Be able to have the health status of compute nodes published.
• Current behaviour
  • Nova queries the ServiceGroup API to get the node liveness information.
• Gap

• Currently Service Group is keeping the health status of compute nodes internal
• within nova, could have had those status published to NFV MANO plane.

Findings:

BP from the OPNFV Doctor team has covered this GAP. Add notification for service status change.

Status: Merged (Mitaka release)

• Owner: Balazs
• BP: https://blueprints.launchpad.net/nova/+spec/service-status-notification
• Spec: https://review.openstack.org/182350
• Code: https://review.openstack.org/#/c/245678/
• Merged Jan 2016 - Mitaka

3.2. GAP 2: Health status of compute node

• Type: ‘reliability’
• Description:

• Desired state:

  • Provide the health status of compute nodes.

• Current Behaviour

  • Currently , while performing some actions like evacuation, Nova is

  checking for the compute service. If the service is down,it is assumed the host is down. This is not exactly true, since there is a possibility to only have compute service down, while all VMs that are running on the host, are actually up. There is no way to distinguish between two really different things: host status and nova-compute status, which is deployed on the host. - Also, provided host information by API and commands, are service centric, i.e.”nova host-list” is just another wrapper for “nova service-list” with different format (in fact “service-list” is a super set to “host-list”).

• Gap

  • Not all the health information of compute nodes can be provided. Seems like

  nova is treating host term equally to compute-host, which might be misleading. Such situations can be error prone for the case where there is a need to perform host evacuation.

Related BP:

Pacemaker and Corosync can provide info about the host. Therefore, there is requirement to have nova support the pacemaker service group driver. There could be another option by adding tooz servicegroup driver to nova, and then have to support corosync driver.

• https://blueprints.launchpad.net/nova/+spec/tooz-for-service-groups

Doctor team is not working on this blueprint

NOTE: This bp is active. A suggestion is to adopt this bp and add a corosync driver to tooz. Could be a solution.

We should keep following this bp, when it finished, see if we could add a corosync driver for tooz to close this gap.

Here are the currently supported driver in tooz. https://github.com/openstack/tooz/blob/master/doc/source/drivers.rst Meanwhile, we should also look into the doctor project and see if this could be solved.

This work is still underway, but, doesn’t directly map to the gap that it is identified above. Doctor team looking to get faster updates on node status and failure status - these are other blueprints. These are good problems to solve.

3.3. GAP 3: Store consoleauth tokens to the database

• Type: ‘performance’
• Description:

• Desired state

  • Change the consoleauth service to store the tokens in the databaseand, optionally,

  cache them in memory as it does now for fast access.

• Current State

  • Currently the consoleauth service is storing the tokens and theconnection data

  only in memory. This behavior makes impossible to have multipleinstances of this service in a cluster as there is no way for one of theisntances to know the tokens issued by the other.

  • The consoleauth service can use a memcached server to store those tokens,but again,

  if we want to share them among different instances of it we would berelying in one memcached server which makes this solution unsuitable for a highly available architecture where we should be able to replicate all ofthe services in our cluster.

• Gap

  • The consoleauth service is storing the tokens and the connection data only in memory.

  This behavior makes impossible to have multiple instances of this service in a cluster as there is no way for one of the instances to know the tokens issued by the other.

• Related BP

• https://blueprints.launchpad.net/nova/+spec/consoleauth-tokens-in-db

The advise in the blueprint is to use memcached as a backend. Looking to the documentation memcached is not able to replicate data, so this is not a complete solution. But maybe redis (http://redis.io/) is a suitable backend to store the tokens that survive node failures. This blueprint is not directly needed for this gap.

Findings:

This bp has been rejected since the community feedback is that A/A can be supported by memcacheD. The usecase for this bp is not quite clear, since when the consoleauth service is done and the token is lost, the other service can retrieve the token again after it recovers. Can be accomplished through a different configuration set up for OpenStack. Therefore not a gap. Recommendation of the team is to verify the redis approach.

3.4. GAP 4: Active/Active HA of cinder-volume

• Type: ‘reliability/scalability’
• Description:

• Desired State:

  • Cinder-volume can run in an active/active configuration.

• Current State:

  • Only one cinder-volume instance can be active. Failover to be handledby

  external mechanism such as pacemaker/corosync.

• Gap

  • Cinder-volume doesn’t supprt active/active configuration.

• Related BP

  • https://blueprints.launchpad.net/cinder/+spec/cinder-volume-active-active-support

• Findings:

  • This blueprint underway for Newton - as of July 6, 2016 great progress has

  been made, we will continue to monitor the progress.

3.5. GAP 5: Cinder volume multi-attachment

• Type: ‘reliability’
• Description:

• Desired State

  • Cinder volumes can be attached to multiple VMs at the same time. So that

  active/standby stateful VNFs can share the same Cinder volume.

• Current State

  • Cinder volumes can only be attached to one VM at a time.

• Gap

  • Nova and cinder do not allow for multiple simultaneous attachments.

• Related BP
  • https://blueprints.launchpad.net/openstack/?searchtext=multi-attach-volume
• Findings
  • Multi-attach volume is still WIP in OpenStack. There is coordination work required with Nova.
  • At risk for Newton
  • Recommend adding a Yardstick test case.

General comment for the next release. Remote volume replication is another important project for storage HA. The HA team will monitor this multi-blueprint activity that will span multiple OpenStack releases. The blueprints aren’t approved yet and there dependencies on generic-volume-group.

3.6. GAP 6: HA tests improvements in fuel

• Type: ‘robustness’

• Description:

  • Desired State - Increased test coverage for HA during install
  • Current State - A few test cases are available
  • Related BP
    • https://blueprints.launchpad.net/fuel/+spec/ha-test-improvements
    • Tie in with the test plans we have discussed previously.
    • Look at Yardstick tests that could be proposed back to Openstack.
    • Discussions planned with Yardstick team to engage with Openstack community to enhance Fuel or Tempest as appropriate.

4. Next Steps:

The six gaps above demonstrate that on going progress is being made in various OPNFV and OpenStack communities. The OPNFV-HA team will work to suggest blueprints for the next OpenStack Summit to help continue the progress of high availability in the community.

<<<<<<< HEAD

Indices and tables

• Search Page

Revision:

Build date: October 21, 2016 >>>>>>> 011d936... Update the docs folder