.. This work is licensed under a Creative Commons Attribution 4.0 International .. License. .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, Ericsson AB, Huawei Technologies Co.,Ltd and others. Yardstick Installation ====================== Abstract -------- Yardstick currently supports installation on Ubuntu 14.04 or by using a Docker image. Detailed steps about installing Yardstick using both of these options can be found below. To use Yardstick you should have access to an OpenStack environment, with at least Nova, Neutron, Glance, Keystone and Heat installed. The steps needed to run Yardstick are: 1. Install Yardstick and create the test configuration .yaml file. 2. Build a guest image and load the image into the OpenStack environment. 3. Create a Neutron external network and load OpenStack environment variables. 4. Run the test case. Installing Yardstick on Ubuntu 14.04 ------------------------------------ .. _install-framework: Installing Yardstick framework ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Install dependencies: :: sudo apt-get update && sudo apt-get install -y \ wget \ git \ sshpass \ qemu-utils \ kpartx \ libffi-dev \ libssl-dev \ python \ python-dev \ python-virtualenv \ libxml2-dev \ libxslt1-dev \ python-setuptools Create a python virtual environment, source it and update setuptools: :: virtualenv ~/yardstick_venv source ~/yardstick_venv/bin/activate easy_install -U setuptools Download source code and install python dependencies: :: git clone https://gerrit.opnfv.org/gerrit/yardstick cd yardstick python setup.py install There is also a YouTube video, showing the above steps: .. image:: http://img.youtube.com/vi/4S4izNolmR0/0.jpg :alt: http://www.youtube.com/watch?v=4S4izNolmR0 :target: http://www.youtube.com/watch?v=4S4izNolmR0 Installing extra tools ^^^^^^^^^^^^^^^^^^^^^^ yardstick-plot """""""""""""" Yardstick has an internal plotting tool ``yardstick-plot``, which can be installed using the following command: :: sudo apt-get install -y g++ libfreetype6-dev libpng-dev pkg-config python setup.py develop easy_install yardstick[plot] .. _guest-image: Building a guest image ^^^^^^^^^^^^^^^^^^^^^^ Yardstick has a tool for building an Ubuntu Cloud Server image containing all the required tools to run test cases supported by Yardstick. It is necessary to have sudo rights to use this tool. Also you may need install several additional packages to use this tool, by follwing the commands below: :: apt-get update && apt-get install -y \ qemu-utils \ kpartx This image can be built using the following command while in the directory where Yardstick is installed (``~/yardstick`` if the framework is installed by following the commands above): :: sudo ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-modify.sh **Warning:** the script will create files by default in: ``/tmp/workspace/yardstick`` and the files will be owned by root! The created image can be added to OpenStack using the ``glance image-create`` or via the OpenStack Dashboard. Example command: :: glance --os-image-api-version 1 image-create \ --name yardstick-trusty-server --is-public true \ --disk-format qcow2 --container-format bare \ --file /tmp/workspace/yardstick/yardstick-trusty-server.img Installing Yardstick using Docker --------------------------------- Yardstick has two Docker images, first one (**Yardstick-framework**) serves as a replacement for installing the Yardstick framework in a virtual environment (for example as done in :ref:`install-framework`), while the other image is mostly for CI purposes (**Yardstick-CI**). Yardstick-framework image ^^^^^^^^^^^^^^^^^^^^^^^^^ Download the source code: :: git clone https://gerrit.opnfv.org/gerrit/yardstick Build the Docker image and tag it as *yardstick-framework*: :: cd yardstick docker build -t yardstick-framework . Run the Docker instance: :: docker run --name yardstick_instance -i -t yardstick-framework To build a guest image for Yardstick, see :ref:`guest-image`. Yardstick-CI image ^^^^^^^^^^^^^^^^^^ Pull the Yardstick-CI Docker image from Docker hub: :: docker pull opnfv/yardstick:$DOCKER_TAG Where ``$DOCKER_TAG`` is latest for master branch, as for the release branches, this coincides with its release name, such as brahmaputra.1.0. Run the Docker image: :: docker run \ --privileged=true \ --rm \ -t \ -e "INSTALLER_TYPE=${INSTALLER_TYPE}" \ -e "INSTALLER_IP=${INSTALLER_IP}" \ opnfv/yardstick \ exec_tests.sh ${YARDSTICK_DB_BACKEND} ${YARDSTICK_SUITE_NAME} Where ``${INSTALLER_TYPE}`` can be apex, compass, fuel or joid, ``${INSTALLER_IP}`` is the installer master node IP address (i.e. 10.20.0.2 is default for fuel). ``${YARDSTICK_DB_BACKEND}`` is the IP and port number of DB, ``${YARDSTICK_SUITE_NAME}`` is the test suite you want to run. For more details, please refer to the Jenkins job defined in Releng project, labconfig information and sshkey are required. See the link https://git.opnfv.org/cgit/releng/tree/jjb/yardstick/yardstick-ci-jobs.yml. Note: exec_tests.sh is used for executing test suite here, furthermore, if someone wants to execute the test suite manually, it can be used as long as the parameters are configured correct. Another script called run_tests.sh is used for unittest in Jenkins verify job, in local manaul environment, it is recommended to run before test suite execuation. Basic steps performed by the **Yardstick-CI** container: 1. clone yardstick and releng repos 2. setup OS credentials (releng scripts) 3. install yardstick and dependencies 4. build yardstick cloud image and upload it to glance 5. upload cirros-0.3.3 cloud image to glance 6. run yardstick test scenarios 7. cleanup OpenStack parameters and credentials ------------------------------------ Yardstick-flavor ^^^^^^^^^^^^^^^^ Most of the sample test cases in Yardstick are using an OpenStack flavor called *yardstick-flavor* which deviates from the OpenStack standard m1.tiny flavor by the disk size - instead of 1GB it has 3GB. Other parameters are the same as in m1.tiny. Environment variables ^^^^^^^^^^^^^^^^^^^^^ Before running Yardstick it is necessary to export OpenStack environment variables from the OpenStack *openrc* file (using the ``source`` command) and export the external network name ``export EXTERNAL_NETWORK="external-network-name"``, the default name for the external network is ``net04_ext``. Credential environment variables in the *openrc* file have to include at least: * OS_AUTH_URL * OS_USERNAME * OS_PASSWORD * OS_TENANT_NAME Yardstick default key pair ^^^^^^^^^^^^^^^^^^^^^^^^^^ Yardstick uses a SSH key pair to connect to the guest image. This key pair can be found in the ``resources/files`` directory. To run the ``ping-hot.yaml`` test sample, this key pair needs to be imported to the OpenStack environment. Examples and verifying the install ---------------------------------- It is recommended to verify that Yardstick was installed successfully by executing some simple commands and test samples. Below is an example invocation of yardstick help command and ping.py test sample: :: yardstick –h yardstick task start samples/ping.yaml Each testing tool supported by Yardstick has a sample configuration file. These configuration files can be found in the **samples** directory. Example invocation of ``yardstick-plot`` tool: :: yardstick-plot -i /tmp/yardstick.out -o /tmp/plots/ Default location for the output is ``/tmp/yardstick.out``. More info about the tool can be found by executing: :: yardstick-plot -h Deploy InfluxDB and Grafana locally ------------------------------------ .. pull docker images Pull docker images ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: docker pull tutum/influxdb docker pull grafana/grafana Run influxdb and config ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Run influxdb :: docker run -d --name influxdb -p 8083:8083 -p 8086:8086 --expose 8090 --expose 8099 tutum/influxdb docker exec -it influxdb bash Config influxdb :: influx >CREATE USER root WITH PASSWORD 'root' WITH ALL PRIVILEGES >CREATE DATABASE yardstick; >use yardstick; >show MEASUREMENTS; Run grafana and config ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Run grafana :: docker run -d --name grafana -p 3000:3000 grafana/grafana Config grafana :: http://{YOUR_IP_HERE}:3000 log on using admin/admin and config database resource to be {YOUR_IP_HERE}:8086 .. image:: images/Grafana_config.png Config yardstick conf ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ cp ./etc/yardstick/yardstick.conf.sample /etc/yardstick/yardstick.conf vi /etc/yardstick/yardstick.conf Config yardstick.conf :: [DEFAULT] debug = True dispatcher = influxdb [dispatcher_influxdb] timeout = 5 target = http://{YOUR_IP_HERE}:8086 db_name = yardstick username = root password = root Now you can run yardstick test case and store the results in influxdb ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ .. Revision: 1a884e81e8ea3779f63122b3af844011d8a1d421 Build date: 2016-08-19