Yardstick Test Case Description TC020ΒΆ

Network Performance
test case id OPNFV_YARDSTICK_TC0020_Virtual Traffic Classifier Instantiation Test
metric Failure
test purpose To verify that a newly instantiated vTC is ‘alive’ and functional and its instantiation is correctly supported by the infrastructure.
configuration

file: opnfv_yardstick_tc020.yaml

vnic_type: type of VNIC to be used.
Allowed values are:
  • normal: for default OvS port configuration
  • direct: for SR-IOV port configuration

Default value: None

vtc_flavor: OpenStack flavor to be used for the vTC
Default available values are: m1.small, m1.medium, and m1.large, but the user can create his/her own flavor and give it as input Default value: None
vlan_sender: vlan tag of the network on which the vTC will
receive traffic (VLAN Network 1). Allowed values: range (1, 4096)
vlan_receiver: vlan tag of the network on which the vTC
will send traffic back to the packet generator (VLAN Network 2). Allowed values: range (1, 4096)
default_net_name: neutron name of the defaul network that
is used for access to the internet from the vTC (vNIC 1).
default_subnet_name: subnet name for vNIC1
(information available through Neutron).
vlan_net_1_name: Neutron Name for VLAN Network 1
(information available through Neutron).
vlan_subnet_1_name: Subnet Neutron name for VLAN Network 1
(information available through Neutron).
vlan_net_2_name: Neutron Name for VLAN Network 2
(information available through Neutron).
vlan_subnet_2_name: Subnet Neutron name for VLAN Network 2
(information available through Neutron).
test tool

DPDK pktgen

DPDK Pktgen is not part of a Linux distribution, hence it needs to be installed by the user.

references

DPDKpktgen

ETSI-NFV-TST001

rfc2544

applicability Test can be configured with different flavors, vNIC type and packet sizes. Default values exist as specified above. The vNIC type and flavor MUST be specified by the user.
pre-test

The vTC has been successfully instantiated and configured. The user has correctly assigned the values to the deployment

configuration parameters.
  • Multicast traffic MUST be enabled on the network.

    The Data network switches need to be configured in order to manage multicast traffic. Installation and configuration of smcroute is required before to run the test case. (For further instructions please refer to the ApexLake documentation).

  • In the case of SR-IOV vNICs use, SR-IOV compatible NICs

    must be used on the compute node.

  • Yarsdtick needs to be installed on a host connected to the

    data network and the host must have 2 DPDK-compatible NICs. Proper configuration of DPDK and DPDK pktgen is required before to run the test case. (For further instructions please refer to the ApexLake documentation).

test sequence Description and expected results
step 1 The vTC is deployed, according to the configuration provided by the user.
step 2 The vTC is correctly deployed and configured as necessary. The initialization script has been correctly executed and the vTC is ready to receive and process the traffic.
step 3 Test case is executed with the parameters specified by the the user: - vTC flavor - vNIC type A constant rate traffic is sent to the vTC for 10 seconds.
step 4

The vTC instance tags all the packets and sends them back to the packet generator for 10 seconds.

The framework checks that the packet generator receives back all the packets with the correct tag from the vTC.

test verdict The vTC is deemed to be successfully instantiated if all packets are sent back with the right tag as requested, else it is deemed DoA (Dead on arrival)