8. Hybrid Multi-Cloud: Data Centre to Edge¶

8.1. Introduction¶

The Modelling focuses on cloud infrastructure abstractions. While these are generic abstractions they and the associated capabilities of the cloud infrastructure are specified for data centres, central office and colocation centres. The environmental conditions, facility and other constraints, and the variability of deployments on the edge are significantly different and, thus, require separate consideration.

It is unrealistic to expect that a private cloud can cost-effectively meet the needs of all workloads when the private cloud must also meet the needs for peak loads and disaster recovery. For this reason alone, enterprises will need to implement a hybrid cloud. In a hybrid cloud deployment, at least two or more distinct cloud infrastructures are interconnected. In a multi-cloud, the distinct cloud infrastructures of the hybrid cloud may be implemented using one or more technologies. The hybrid multi-cloud infrastructure has differences requiring different abstractions. These hybrid multi-clouds can be considered to be federated.

In the Modelling, the cloud infrastructure is defined. The tenants are required to provide certain needed services (such as Load Balancer (LB), messaging). Thus, the VNF/CNFs incorporate different versions of the same services with the resultant issues related to an explosion of services, their integration and management complexities. To mitigate these issues, the Reference Model must specify the common services that every Telco cloud must support and thereby require workload developers to utilise these pre-specified services.

A generic Telco cloud is a hybrid multi-cloud or a federated cloud that has deployments in large data centres, central offices or colocation facilities, and the edge sites. This chapter discusses the characteristics of Telco Edge and hybrid multi-cloud.

8.2. Hybrid Multi-Cloud Architecture¶

The GSMA whitepaper on “Operator Platform Concept Phase 1: Edge Cloud Computing” (January 2020) states, “Given the wide diversity of use cases that the operators will tasked to address, from healthcare to industrial IoT, it seems logical for operators to create a generic platform that can package the existing assets and capabilities (e.g., voice messaging, IP data services, billing, security, identity management, etc. …) as well as the new ones that 5G makes available (e.g., Edge cloud, network slicing, etc.) in such a way as to create the necessary flexibility required by this new breed of enterprise customers.”

Cloud computing has evolved and matured since 2010 when NIST published its definition of cloud computing, with its 5 essential characteristics, 3 service models and 4 deployment models.

The generic model for an enterprise cloud has to be “hybrid” with the special cases of purely private or public clouds as subsets of the generic hybrid cloud deployment model. In a hybrid cloud deployment, at least two or more distinct cloud infrastructures are inter-connected together.

Cloud deployments can be created using a variety of technologies (e.g., OpenStack, Kubernetes) and commercial technologies (e.g., VMware, AWS, Azure, etc.). A multi-cloud deployment can consist of the use of more than one technology.

A generic Telco cloud is a hybrid multi-cloud. A better designation would be a federation of clouds - a federated cloud:

a collection of cooperating, interoperable autonomous component clouds
the component clouds perform their local operations (internal requests) while also participating in the federation and responding to other component clouds (external requests)
the component clouds perform their local operations (internal requests) while also participating in the federation and responding to other component clouds (external requests)
- the component clouds are autonomous in terms of, for example, execution autonomy; please note that in a centralised control plane scenario (please see the section “Centralised Control Plane” in the “Edge Computing: Next Steps in Architecture, Design and Testing” whitepaper [26]) the edge clouds do not have total autonomy and are subject to constraints (e.g., workload LCM)
- execution autonomy is the ability of a component cloud to decide the order in which internal and external requests are performed
- also, a federation controller does not impose changes to the component cloud except for running some central component(s) of the federated system (for example, a broker agent – executes as a workload)
the component clouds are likely to differ in, for example, infrastructure resources and their cloud platform software
workloads may be distributed on single or multiple clouds, where the clouds may be collocated or geographically distributed
component clouds only surface NBIs (Please note that VMware deployed in a private and a public cloud can be treated as a single cloud instance)

8.3. Characteristics of a Federated Cloud¶

In this section, we will further explore the characteristics of the federated cloud architecture, and architecture building blocks that constitute the federated cloud. For example, Figure 8.1 shows a Telco Cloud that consists of 4 sub-clouds: Private on premise, Cloud Vendor provided on premise, Private outsourced (Commercial Cloud Provider such as a Hyperscaler Cloud Provider (HCP), and Public outsourced (see diagram below). Such an implementation of a Telco Cloud allows for mix’n’match of price points, flexibility in market positioning and time to market, capacity with the objective of attaining near “unlimited” capacity, scaling within a sub-cloud or through bursting across sub-clouds, access to “local” capacity near user base, and access to specialised services.

Figure 8.1 Example Hybrid Multi-Cloud Component Cloud¶

8.4. Telco Cloud¶

The Figure 8.2 presents a visualisation of a Telco operator cloud (or simply, Telco cloud) with clouds and cloud components distributed across Regional Data Centres, Metro locations (such as Central Office or a Colocation site) and at the Edge, that are interconnected using a partial mesh network. Please note that at the Regional centre level the interconnections are likely to be a “fuller” mesh while being a sparser mesh at the Edges.

Figure 8.2 Telco Cloud: Data Centre to Edge¶

The Telco Operator may own and/or have partnerships and network connections to utilize multiple Clouds for network services, IT workloads, and external subscribers. The types of the component clouds include:

On Premise Private
- Open source; Operator or Vendor deployed and managed | OpenStack or Kubernetes based
- Vendor developed; Operator or Vendor deployed and managed | Examples: Azure on Prem, VMware, Packet, Nokia, Ericsson, etc.
On Premise Public: Commercial Cloud service hosted at Operator location but for both Operator and Public use | Example: AWS Wavelength
Outsourced Private: hosting outsourced; hosting can be at a Commercial Cloud Service | Examples: Equinix, AWS, etc.
(Outsourced) Public: Commercial Cloud Service | Examples: AWS, Azure, VMware, etc.
Multiple different Clouds can be co-located in the same physical location and may share some of the physical infrastructure (for example, racks)
Outsourced Private: hosting outsourced; hosting can be at a Commercial Cloud Service | Examples: Equinix, AWS, etc.
(Outsourced) Public: Commercial Cloud Service | Examples: AWS, Azure, VMware, etc.
Multiple different Clouds can be co-located in the same physical location and may share some of the physical infrastructure (for example, racks)

In general, a Telco Cloud consists of multiple interconnected very large data centres that serve trans-continental areas (Regions). A Telco Cloud Region may connect to multiple regions of another Telco Cloud via large capacity networks. A Telco Cloud also consists of interconnected local/metro sites (multiple possible scenarios). A local site cloud may connect to multiple Regions within that Telco Cloud or another Telco Cloud. A Telco Cloud also consists of a large number of interconnected edge nodes where these edge nodes maybe impermanent. A Telco Cloud’s Edge node may connect to multiple local sites within that Telco Cloud or another Telco Cloud; an Edge node may rarely connect to a Telco Cloud Region.

Table 8-1 captures the essential information about the types of deployments, and responsible parties for cloud artefacts.

Type	System Developer	System Maintenance	System Operated & Managed by	Location where Deployed	Primary Resource Consumption Models
Private (Internal Users)	Open Source	Self/Vendor	Self/Vendor	On Premise	Reserved, Dedicated
Private	Vendor, HCP	Self/Vendor	Self/Vendor	On Premise	Reserved, Dedicated
Public	Vendor, HCP	Self/Vendor	Self/Vendor	On Premise	Reserved, On Demand
Private	HCP	Vendor	Vendor	Vendor Locations	Reserved, Dedicated
Public (All Users)	HCP	Vendor	Vendor	Vendor Locations	On Demand, Reserved

Table 8-1: Cloud Types and the Parties Responsible for Artefacts

8.4.1. Telco Operator Platform Conceptual Architecture¶

Figure 8.3 shows a conceptual Telco Operator Platform Architecture. The Cloud Infrastructure Resources Layer exposes virtualised (including containerised) resources on the physical infrastructure resources and also consists of various virtualisation and management software (see details later in this chapter). The Cloud Platform Components Layer makes available both elementary and composite objects for use by application and service developers, and for use by Services during runtime. The Cloud Services Layer exposes the Services and Applications that are available to the Users; some of the Services and Applications may be sourced from or execute on other cloud platforms. Please note that while the architecture is shown as a set of layers, this is not an isolation mechanism and, thus, for example, Users may access the Cloud Infrastructure Resources directly without interacting with a Broker.

Figure 8.3 Conceptual Architecture of a Telco Operator Platform¶

The Cloud Services and the Cloud Resources Brokers provide value-added services in addition to the fundamental capabilities like service and resource discovery. These Brokers are critical for a multi-cloud environment to function and utilise cloud specific plugins to perform the necessary activities. These Brokers can, for example, provision and manage environments with resources and services for Machine Learning (ML) services, Augmented/Virtual Reality, or specific industries.

8.5. Multi-Cloud Interactions Model¶

To realise a federated cloud requires the definition and agreement on a set of APIs. These APIs should allow each of the parties to interact cooperatively and need to cover the management layer: business management and service operations interactions; as well as the data plane, customer and user, transactions and conversational interfaces.

As outlined in Figure 8.3 above, the exposure point for the Management Interactions is the “Cloud Service Broker” and the “Cloud Resource Broker”. The set of interactions that these interface points need to provide are defined by the Figure 8.4 below. This provides a taxonomy for the interactions between the Communications Service Provider and the Cloud Providers.

Figure 8.4 Multi-Cloud Interactions Model¶

The model defines the following core roles:

Communications Service Provider (CSP) - is the party responsible for providing end user service to their customer
Customer/User - are the parties that use the service (User) and establishes the business agreement for the service provision (Customer). For retail services the customer and user are the same party, while for enterprise services the Enterprise is the Customer (responsible for the business agreement) and its representatives are the Users.
Cloud Providers - are the parties providing the cloud services. These services could be any XaaS service. It could be that a CSP has an agreement with a SaaS Cloud, which in turn uses an IaaS Cloud Provider to deliver their service.

The set of high level interactions cover:

Manage Account - covering Account, Users, Subscription, Billing
Manage Connectivity - Public or Private Network, VPN Configuration, CSP Edge/Cloud Connection Configuration, Connection Security Profile
Manage Resource - Resource Pool Management, VM/VNF Management (CPU, Memory, Storage, Network), Image Repository Management, Storage Management, VNF/CNF LCM, Monitor Resources
Manage App/VNF - Image/Container/Registry Management, Deploy/Configure/Scale/Start/Stop App/VNF, Monitor App/VNFs
Transactions / Conversations - Use Communications Services, Use Edge Applications Services, Use Cloud Services

8.5.1. Stereo-Typical Scenarios¶

A set of stereo-typical interactions cases are illustrated for the cases of a Simple Infrastructure-as-a-Service (IaaS) and Software-as-a-Service (SaaS), where deployment is on a Cloud Provider’s centralised sites and/or Edge sites. The scenarios help highlight needs for the Cloud Service Broker and Cloud Resources Broker (as per Figure 8.3) and hence extent of orchestration required to manage the interactions.

Figure 8.5 Simple Stereo-Typical Interactions¶

The following patterns are visible:

For IaaS Cloud Integration:
- Cloud behaves like a set of virtual servers and, thus, requires virtual server life-cycle management and orchestration
- Depending on whether the cloud is accessed via public internet or private connection will change the extend of the Connectivity Management
For SaaS Cloud Integration:
- Cloud behaves like a running application/service and requires subscription management, and complex orchestration of the app/service and underlying resources is managed by SaaS provider with the User is relieved of having to provide direct control of resources
For CaaS Cloud Integration:
- Registry for pulling Containers could be from:
  - Cloud in which case consumption model is closer to SaaS or
  - from Private / Public Registry in which case integration model requires specific registry management elements
For Edge Cloud Integration:
- Adds need for Communications Service Provider and Cloud Provider physical, network underlay and overlay connectivity management

A disaggregated scenario for a CSP using SaaS who uses IaaS is illustrated in the following diagram:

Figure 8.6 Disaggregated SaaS Stereo-Typical Interaction¶

In disaggregated SaaS scenario the application provider is able to operate as an “infra-structureless” organisation. This could be achieved through SaaS organisation using public IaaS Cloud Providers which could include the CSP itself. A key consideration for CSP in both cloud provision and consumption in Multi-Cloud scenario is how to manage the integration across the Cloud Providers.

To make this manageable and avoid integration complexity, there are a number of models:

Industry Standard APIs that allow consistent consumption across Cloud Providers,
API Brokage which provide consistent set of Consumer facings APIs that manage adaption to prorietry APIs
Cloud Brokerage where the Brokerage function is provided “as a Service” and allow “single pane of glass” to be presented for management of the multi-cloud environment

The different means of integrating with and managing Cloud Providers is broadly covered under the umbrella topic of “Cloud Management Platforms”. A survey of applicable standards to achieve this is provided in section 8.2.4.3 “Requirements, Reference Architecture & Industry Standards Intersect”.

The API and Cloud Brokerage models are illustrated in the following diagrams:

Figure 8.7 API Brokerage Multi-Cloud Stereo-Typical Interaction¶

Figure 8.8 Cloud Brokerage Multi-Cloud Stereo-Typical Interaction¶

8.5.2. Requirements, Reference Architecture & Industry Standards Intersect¶

The Communcations Service Provider (CSP) is both a provider and consumer of Cloud based services. When the CSP is actings as:

consumer, in which case the typical consideration is total cost of ownership as the consumption is to usually to support internal business operations: BSS/OSS systems;
provider of cloud services, through operation of their own cloud or reselling of cloud services, in which case the typical consideration is margin (cost to offer services vs income received).

These two stances will drive differing approaches to how a CSP would look to manage how it interacts within a Multi-Cloud environment.

As a consumer of cloud services to support internal Business operations and BSS/OSS, the focus is on meeting the needs of the organisation’s applications . Historically this came with the need to operate and support the organisation’s infrastructure needs. The result was a split of the CIO organisation into Delivery and Operations groups. At the same time that the CIO application workloads are moving to SaaS and other Cloud Providers, the CTO Network Systems are migrating from running on custom dedicated infrastructure to run on virtualised COTS infrastructure; examples include IMS, 3GPP (4G & 5G) functions, IP Routers and Firewalls are being provided as VNFs and CNFs. These network workloads are now also being deployed on private CSP clouds as well as public clouds.

As outlined in section “8.2.2 Telco Cloud”, the result is that the CSP “network” is now an interconnected set of distributed Cloud Infrastructure supported by different Cloud Providers, including the CSP, and, hence, the term “Hybrid Multi-Cloud”, and the need for the CSP to be able to support and utilize this interconnected cloud is both inevitable and essential.

As a consumer and provider of Cloud Services, the CSP will continue to need to build and manage its own Cloud Infrastructure as well as provide:

cloud orchestration solutions to orchestrate the utilisation of cloud services and capabilities from its own and other Cloud Providers;
network orchestration solutions to manage the interconnectivity across its own and other Cloud Provider networks.

The interactions for this are outlined in the “Multi-Cloud Interactions Model”, however, to realise this, the CSP will need to adopt and sponsor a set of standards that are necessary to support these interactions. The identification of existing appliable standards and gaps across the interactions needs to be completed. As a first step, the following criteria for inclusion of a standard/technology is defined. These standards/technologies must:

provide capabilities that are necessary to achieve hybrid multi-cloud vision and the multi-cloud interactions
be already mature Open Standards that have either been adopted or nurtured by recognised bodies with the telecommunications industry (e.g. ITU, ETSI, TMForum, GSMA, 3GPP, ISO and national Standards Organiations, (ANSI etc,) NIST)
have reference implementations or an active open source project/s or consortia providing implementations (e.g., CNCF (Cloud Native Computing Foundation). Open Infrastructure Foundation)
allow the CSP to source delivery and support services based on these from multiple vendors
allow the CSP to actively contribute to and request capabilities/coverage of the standard/technology
not be the sole proprietary property of a vendor/company
not be focused on “Transactions/Conversations” or “User/Data Plane” standards (typically IETF, IEEE, MEF/Carrier Ethernet etc.)

8.5.3. Hybrid, Edge, and Multi-Cloud unified management Platform¶

As organisations spread their resources across on-premises, multiple clouds, and the Edge, the need for a single set of tools and processes to manage and operate across these Hybrid, Edge, and Multi-clouds (HEM clouds) is obvious as can be seen from the following simplistic scenarios.

Scenario: An operator has private clouds that it utilises for its workloads. Over time, the operator evolves their environment:

A: The operator has decided to utilise one or more public clouds for some of its workloads.
B: The operator has decided to utilise an edge cloud for some of its clients.
C: The operator has decided to create edge clouds for some of its clients.

Scenario B can be treated as being the same as Scenario A. Scenario C is akin to the private cloud except for location and control over the facilities at that location. For its workloads, the operator will have to utilise the target clouds tools or APIs to create the necessary accounts, billing arrangements, quotas, etc. Then create the needed resources, such as VMs or Kubernetes clusters, etc. Following up with creating needed storage, networking, etc. before onboarding the workload and operating it. This is complex even when the operator is dealing with say only one other cloud, in addition to operating its own cloud. The operator is faced with a number of challenges including acquiring a new set of skills, knowledge of APIs, tools, and the complexity of managing different policies, updates, etc. This becomes impossible to manage when incorporating more than one other cloud. Hence the need for a Single Pane of Glass.

This Hybrid, Edge, and Multi-Cloud unified management Platform (HEMP) (a.k.a. Single-Pane-of-Glass) provides capabilities to consistently:

manage accounts, credentials, resources and services
- across facilities (regions, data centers, edge locations)
interoperate the different clouds
implement common policies and governance standards
manage a common security posture
provide an integrated visualisation into the infrastructure and workloads.

through a common set of governance and operational practices.

GSMA’s Operator Platform Group (OPG) specify a federated model and specify requirements for the Edge Platforms (Operator Platform Telco Edge Requirements v2.0 ); while the document is for Edge, most of the requirements are easily applicable to other cloud deployments. Anuket RM is implementation agnostic, viz., whether the implementation uses agents, federations or some other mechanisms.

The following tables list some of the requirements for the Hybrid, Edge, and Multi cloud operator Platform (HEMP). These requirements are in addition to the requirements in other chapters of this RM.

HEMP General Requirements

Ref	Requirement	Definition/Note
hem.gen.001	HEMP should use only published APIs in managing component clouds	For example, to accomplish the example in hem.gen.003 it will use the published APIs of the target cloud.
hem.gen.002	HEMP should publish all of the APIs used by any of its components	For example, the provided GUI portal shall only use HEMP published APIs
hem.gen.003	HEMP should provide for common terms for interaction with its constituent clouds	For example, “create Account” across the different clouds
hem.gen.004	HEMP should generalise and define a common set of resources available to be managed inconstituent clouds	Example resources: hosts (including BareMetal), Virtual Machines (VM), vCPU, Memory, Storage, Network, kubernetes clusters, kubernetes nodes, Images (OS, and others), credentials. For private cloud additional example resources: Racks, ToR/CE switches, Platform images
hem.gen.005	HEMP should provide a common interface for managing component clouds
hem.gen.006	HEMP should expose resources from all cloud operators and locations (regions, sites, etc.)	See example of resources in hem.gen.004 Definition/Note
hem.gen.007	HEMP should allow reservation of resources if the component cloud operator allows
hem.gen.008	HEMP should support multi-tenancy

Table : Hybrid, Edge, and Multi cloud operator Platform (HEMP) General Requirements

HEMP Operations Requirements

Ref	Requirement	Definition/Note
hem.ops.001	HEMP should generalise and define a common set of management operations available in constituent clouds; required operations include: create, deploy, configure, start, suspend, stop, resume, reboot, delete, scale, list. Some operations may only be available for a subset of resources.
hem.ops.002	HEMP should centrally manage all resources (across all constituent clouds)
hem.ops.003	HEMP should centrally operate all constituent clouds
hem.ops.004	HEMP should provide mechanisms to integrate new clouds	This may require pre-development of necessary capabilities for the support of HEMP abstractions, and impementation of connectivity with the new cloud
hem.ops.005	HEMP should provide mechanisms to drop a constituent cloud	For example, the provided GUI portal shall only use HEMP published APIs
hem.ops.006	HEMP should provide mechanisms and processes to onboard existing assets (resources, connectivity, etc.)
hem.ops.007	HEMP should provide mechanisms and processes for the automated configuration management of all environments and resources

Table : Hybrid, Edge, and Multi cloud operator Platform (HEMP) Operability Requirements

HEMP LCM Requirements

Ref	Requirement	Definition/Note
hem.lcm.001	HEMP should monitor all environments and assets
hem.lcm.002	HEMP should provide visibility into the health of all assets
hem.lcm.003	HEMP should provide capabilities for a centralised visibility and management of all alerts
hem.lcm.004	HEMP should provide capabilities for a centralised analysis of all logs	This doesn’t preclude local log analytics

Table : Hybrid, Edge, and Multi cloud operator Platform (HEMP) Life Cycle Management (LCM) Requirements

HEMP Security Requirements

Ref	Requirement	Definition/Note
hem.sec.001	HEMP should provide capabilities for the centralised management of all security policies
hem.sec.002	HEMP should provide capabilities for the centralised tracking of compliance of all security requirements (Consolidated Security Requirements)
hem.sec.003	HEMP should provide capabilities for insights into changes that resulted for resource non-compliance

Table : Hybrid, Edge, and Multi cloud operator Platform (HEMP) Security Requirements

8.5.4. Aspects of Multi-Cloud Security¶

Cloud infrastructures, emerging as a key element in the telco operator ecosystem, are part of the attack surface landscape. This is particularly worrying with the 5G rollout becoming a critical business necessity. It is important to be vigilant of Cloud-focused threats and associated adversarial behaviours, methods, tools, and strategies that cyber threat actors use.

In the multi-cloud ecosystem comprised of different security postures and policies, network domains, products, and business partnerships, the responsibility for managing these different cloud environments necessary to support 5G use cases falls to different enterprises, creating new levels of complexities and a new range of security risks. In such an environment, there are additional security principles to be considered. These principles, see the table below, are drawn from the collaboration with the GSMA Fraud and Security Group (FASG) and the “5G security Guide”, FS.40 v2.0 document.

Multi-cloud Security Principle	Description
Policy synchronization	Consistency in applying the right security policies across environments, services, interfaces, and configured resources
Visibility	A common data model approach to share events and behaviours across all the key compute, storage, network, and applications resources, environments, virtualised platforms, containers and interfaces
Monitoring	Centralisation, correlation, and visualisation of security information across the different cloud environments to provide an end-to-end view and enable timely response to attacks
Automation	Automation of critical activities including cloud security posture management, continuous security assessments, compliance monitoring, detection of misconfigurations and identification and remediation of risks
Access Management	Wide range of users including administrators, testers, DevOps, and developers and customers should be organised into security groups with privileges appropriate to different resources and environments
Security Operations Model	Augmentation of security services provided by cloud service providers with the vetted third-party and/or open-source tools and services, all incorporated into the established overall security operations model

Table : Multi-Cloud Security Principles

For telco operators to run their network functions in a multi-cloud environment, and specifically, in public clouds, the industry will need a set of new standards and new security tools to manage and regulate the interactions between multi-cloud participating parties. To give an example of a step in this direction, refer to the ETSI specification TS 103 457 “Interface to offload sensitive functions to a trusted domain”, which provides extra security requirements for public clouds so as to enable telco operators the option of running network functions in public clouds.

There is also another security aspect to consider, which is related to the autonomous nature of the participants in the multi-cloud. We can prescribe certain things and if not satisfied treat that party as “untrusted”. This problem has been addressed to some extent in TS 103 457. This standard introduces a concept of an LTD (Less Trusted Domain) and an MTD (More Trusted Domain) and specifies the TCDI (Trusted Cross-Domain Interface) to standardise secure interactions between them. The standard defined the following elementary functions of TCDI: Connection and session management Data and value management Transferring cryptography functionality:

Entropy request
Encryption keys request
Trusted timestamping
Secure archive
Secure storage
Search capabilities

As described in Sec. 1 (Scope) of the TS 103 457 document, it specifies “… a high-level service-oriented interface, as an application layer with a set of mandatory functions, to access secured services provided by, and executed in a More Trusted Domain. The transport layer is out of scope and left to the architecture implementation”. The standard provides extra security features for sensitive functions down to individual Virtual Machines or Containers. As such, it is recommended that the relevant components of reference models, reference architecture, reference implementations and reference compliance take notice of this standard and ensure their compatibility, wherever possible.

8.6. Telco Edge Cloud¶

This section presents the characteristics and capabilities of different Edge cloud deployment locations, infrastructure, footprint, etc. Please note that in the literature many terms are used and, thus, this section includes a table that tries to map these different terms.

8.6.1. Telco Edge Cloud: Deployment Environment Characteristics¶

Telco Edge Cloud (TEC) deployment locations can be environmentally friendly such as indoors (offices, buildings, etc.) or environmentally challenged such as outdoors (near network radios, curb side, etc.) or environmentally harsh environments (factories, noise, chemical, heat and electromagnetic exposure, etc). Some of the more salient characteristics are captured in Table 8-2.

	Facility Type	Environmental Characteristics	Capabilities	Physical Security	Implications	Deployment Locations
Environmentally friendly	Indoors: typical commercial or residential structures	Protected, Safe for common infrastructure	Easy access to continuous electric power, High/Medium bandwidth Fixed and/or wireless network access	Controlled Access	Commoditised infrastructure with no or minimal need for hardening / ruggedisation, Operational benefits for installation and maintenance	Indoor venues: homes, shops, offices, stationary and secure cabinets, Data centers, central offices, co-location facilities, Vendor premises, Customer premises
Environmentally challenged	Outdoors and/or exposed to environmentally harsh conditions	maybe unprotected, Exposure to abnormal levels of noise, vibration, heat, chemical, electromagnetic pollution	May only have battery power, Low/Medium bandwidth Fixed and/or mobile network access	No or minimal access control	Expensive ruggedisation, Operationally complex	Example locations: curb side, near cellular radios,

Table 8-3. TEC Deployment Location Characteristics & Capabilities

8.6.2. Telco Edge Cloud: Infrastructure Characteristics¶

Commodity hardware is only suited for environmentally friendly environments. Commodity hardware have standardised designs and form factors. Cloud deployments in data centres typically use such commodity hardware with standardised configurations resulting in operational benefits for procurement, installation and ongoing operations.

In addition to the type of infrastructure hosted in data centre clouds, facilities with smaller sized infrastructure deployments, such as central offices or co-location facilities, may also host non-standard hardware designs including specialised components. The introduction of specialised hardware and custom configurations increases the cloud operations and management complexity.

At the edge, the infrastructure may further include ruggedised hardware for harsh environments and hardware with different form factors.

8.6.3. Telco Edge Cloud: Infrastructure Profiles¶

The Profiles and Workload Flavours section specifies two infrastructure profiles:

The Basic cloud infrastructure profile is intended for use by both IT and Network Function workloads that have low to medium network throughput requirements.

The High Performance cloud infrastructure profile is intended for use by applications that have high network throughput requirements (up to 50Gbps).

The High Performance profile can specify extensions for hardware offloading; please see Hardware Acceleration Abstraction. The Reference Model High Performance profile includes an initial set of Profile Extensions.

Based on the infrastructure deployed at the edge, Table 8-3 specifies the Feature set and Requirements from Infrastructure that would need to be relaxed.

Reference	Feature	Description	As Specified in RM Chapter 05		Exception for Edge
Reference	Feature	Description	Basic Type	High Performance	Basic Type	High Performance
infra.stg.cfg.003	Storage with replication		N	Y	N	Optional
infra.stg.cfg.004	Storage with encryption		Y	Y	N	Optional
infra.hw.cpu.cfg.001	Minimum Number of CPU sockets	This determines the minimum number of CPU sockets within each host	2	2	1	1
infra.hw.cpu.cfg.002	Minimum Number of cores per CPU	This determines the number of cores needed per CPU.	20	20	1	1
infra.hw.cpu.cfg.003	NUMA alignment	NUMA alignment support and BIOS configured to enable NUMA	N	Y	N	Y (*)

Table 8-4. TEC Exceptions to Infrastructure Profile features and requirements

(*) immaterial if the number of CPU sockets (infra.hw.cpu.cfg.001) is 1

Please note that none of the listed parameters form part of a typical OpenStack flavour except that the vCPU and memory requirements of a flavour cannot exceed the available hardware capacity.

8.6.4. Telco Edge Cloud: Platform Services Deployment¶

This section characterises the hardware capabilities for different edge deployments and the Platform services that run on the infrastructure. Please note, that the Platform services are containerised to save resources, and benefit from intrinsic availability and auto-scaling capabilities.

	Platform Services							Storage			Network Services
	Iden- tity	Image	Plac- ement	Comp- ute	Netw- orki- ng	Mess- age Queue	DB Server	Ephem- eral	Persi- stent Block	Pers- iste- nt Obje- ct	Mana- geme- nt	Unde- rlay (Pro- vid- er)	Over- lay
Control Nodes	✅	✅	✅	✅	✅	✅	✅		✅		✅	✅	✅
Workload Nodes (Compute)				✅	✅			✅	✅	✅	✅	✅	✅
Storage Nodes									✅	✅	✅	✅	✅

Table 8-5. Characteristics of Infrastructure nodes

Depending on the facility capabilities, deployments at the edge may be similar to one of the following:

Small footprint edge device
Single server: deploy multiple (one or more) workloads
Single server: single Controller and multiple (one or more) workloads
HA at edge (at least 2 edge servers): Multiple Controller and multiple workloads

8.6.5. Comparison of Deployment Topologies and Edge terms¶

This Speci- ficat- ion	Comp- ute	Stor- age	Netwo- rking	RTT	Secur- ity	Scala- bility	Elast- icity	Resi- lie- ncy	Pref- erred Work- load Arch- itec- ture	Upgr- ades	Open- Stack	OPNFV Edge	Edge Glo- ssa- ry
Regio- nal Data Centre (DC), Fixed	1000’- s, Stand- ardis- ed, >1 CPU >20 c- ores / CPU	10’s EB, Stand- ardis- ed, HDD and NVMe, Perma- nence	>100 Gbps, Stand- ardis- ed	~100 ms	Highly Secure	Horiz- ontal and unlim- ited scali- ng	Rapid spin up and down	Infr- astr- uctu- re arch- itec- ted for resi- lien- cy, Redu- ndan- cy for FT and HA	Micr- oser- vices bas- ed, Stat- ele- ss, Hos- ted on Cont- aine- rs	Firm- ware: When requ- ired, Plat- form SW: CD	Cent- ral Data Cent- re
Metro Data Centr- es, Fixed	10’s to 100’s, Stand- ardis- ed, >1 CPU >20 c- ores / CPU	100’s PB, Stand- ardis- ed, NVMe on PCIe, Perma- nence	> 100 Gbps, Stand- ardis- ed	~10 ms	Highly Secure	Horiz- ontal but limit- ed scal- ing	Rapid spin up and down	Infr- astr- uctu- re arch- itec- ted for some level of resi- lien- cy, Redu- ndan cy for limi- ted FT and HA	Micr- oser- vices bas- ed, Stat- ele- ss, Host- ed on Cont- aine- rs	Firm- ware: When requ- ired, Plat- form SW: CD	Edge Site	Large Edge	Agg- reg- ati- on Edge
Edge, Fixed / Mobile	10’s, Some Varia- bili- ty, >=1 CPU, >10 cores / CPU	100 TB, Stand- ardis- ed, NVMe on PCIe, Perma- nence / Ephem- eral	50 Gb- ps, Stand- ardi- sed	~5 ms	Low Level of Trust	Horiz- ontal but highly const- rained scal- ing, if any	Rapid spin up (when possi- ble) and down	Appl- icat- ions desi- gned for resi- lien- cy agai- nst infra fail- ures, No or high- ly limi- ted redu- ndan- cy	Micr- oser- vices bas- ed, Stat- ele- ss, Host- ed on Cont- aine- rs	Firm- ware: When requ- ired, Plat- form SW: CD	Far Edge Site	Medi- um Edge	Acc- ess Edge / Agg- rega- tion Edge
Mini- / Micro- Edge, Mobile / Fixed	1’s, High Varia- bili- ty, Harsh Envir- onmen- ts, 1 CPU, >2 cores / CPU	10’s GB, NVMe, Ephem- eral, Cachi- ng	10 Gbps, Conne- ctivi- ty not Guara- nteed	<2 ms, Locat- ed in netwo- rk proxi- mity of EUD / IoT	Untru- sted	Limit- ed Verti- cal Scali- ng (resi- zing)	Const- rained	Appl- icat- ions desi- gned for resi- lien- cy agai- nst infra fail- ures, No or high- ly limi- ted redu- ndan- cy	Micr- oerv- ices based or mono- lit- hic, Stat- eless or Stat- eful, Host- ed on Cont- aine- rs or VMs, Subj- ect to QoS, adap- tive to reso- urce avai- labi- lity, viz. redu- ce reso- urce cons- umpt- ion as they satu- rate	Plat- form	Fog Comp- uting (Mos- tly depr- ecat- ed term- inol- ogy), Extr- eme Edge, Far Edge	Small Edge	Acc- ess Edge

Table 8-6: Comparison of Deployment Topologies