.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 .. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat) ============================ Network Topology After Setup ============================ ***************************** Post-Install Network Topology ***************************** The network topology after setting up service VM as IPv6 vRouter is shown as follows :numref:`postinstall-figure1`: .. figure:: images/ipv6-postinstall-topology.png :name: postinstall-figure1 :width: 100% Post-Install Network Topology ******************************************************** Sample Network Topology of this Setup through Horizon UI ******************************************************** The sample network topology of the setup will be shown in Horizon UI as follows :numref:`setup-figure1`: .. figure:: images/ipv6-sample-in-horizon.png :name: setup-figure1 :width: 100% Sample Network Topology in Horizon UI ********************************************************* Sample Network Topology of this Setup through ODL DLUX UI ********************************************************* If you set up either Scenario 2 or Scenario 3, the sample network topology of the setup will be shown in Open Daylight DLUX UI as follows :numref:`s23-figure1`: .. figure:: images/odl-dlux_ipv6_poc.png :name: s23-figure1 :width: 100% Sample Network Topology in Open Daylight DLUX UI .. Revision: b55a4c8a31f16ea91b54374835f6ebb53da998e9 Build date: 2016-09-01