==========================================
Setting Up a Service VM as an IPv6 vRouter
==========================================

:Project: IPv6, http://wiki.opnfv.org/ipv6_opnfv_project
:Editors: Bin Hu (AT&T), Sridhar Gaddam (RedHat)
:Authors: Sridhar Gaddam (RedHat), Bin Hu (AT&T)

:Abstract:

This document provides the users with installation guidelines to create a Service VM as
an IPv6 vRouter in OPNFV environment, i.e. integrated OpenStack with Open Daylight
environment. There are three scenarios.

* Scenario 1 is pre-OPNFV environment, i.e. a native OpenStack environment
  without Open Daylight Controller.
* Scenario 2 is an OPNFV environment where OpenStack is integrated with
  Open Daylight Official Lithium Release. In this setup we use ODL for "Layer 2 connectivity"
  and Neutron L3 agent for "Layer 3 routing". Because of a bug, which got fixed recently
  and is not part of ODL SR3, we will have to manually execute certain commands to simulate
  an external IPv6 Router in this setup.
* Scenario 3 is similar to Scenario 2. However, we use an Open Daylight Lithium
  controller which is built from the latest stable/Lithium branch which includes the fix.
  In this scenario, we can fully automate the setup similar to Scenario 1.

.. toctree::
   :numbered:
   :maxdepth: 4

   architecture-design.rst
   5-ipv6-configguide-scenario-1-native-os.rst
   scenario-2.rst
   topology-after-setup.rst

.. only:: html

    Revision: 0d45e89e70abf93440415d4d4faaa996f05b96ad

    Build date: |today|