2020-01-15 01:44:50,246 [salt.utils.decorators:613 ][WARNING ][1642] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2020-01-15 01:45:06,373 [salt.utils.parsers:1051][WARNING ][1302] Minion received a SIGTERM. Exiting.
2020-01-15 01:46:16,240 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,317 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,321 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,325 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,328 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,558 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,562 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,566 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,602 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,606 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,609 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,614 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,692 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,720 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,725 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,729 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,734 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,739 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,743 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,747 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,751 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,755 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,760 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,764 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,768 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,772 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,776 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,780 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,784 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,788 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,793 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,797 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,801 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,805 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,809 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,813 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,817 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,821 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,826 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,830 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,834 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,838 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,842 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,846 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,850 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,854 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,858 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,863 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,867 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,871 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,875 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,879 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,883 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,887 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,892 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,896 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:46:16,900 [salt.utils.decorators:82  ][ERROR   ][3712] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2020-01-15 01:47:30,827 [salt.utils.decorators:613 ][WARNING ][3712] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2020-01-15 01:47:55,881 [salt.utils.decorators:613 ][WARNING ][7155] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2020-01-15 01:48:41,341 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,146 [salt.utils.decorators:613 ][WARNING ][7155] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2020-01-15 01:48:57,333 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,335 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,336 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,338 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,340 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,341 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,343 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:57,344 [salt.loaded.int.states.file:2298][WARNING ][7155] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 01:48:59,523 [salt.loaded.int.module.debian_ip:1964][WARNING ][7155] The network state sls is requiring a reboot of the system to properly apply network configuration.
2020-01-15 01:49:00,381 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][7155] Command '['umount', '/dev/shm']' failed with return code: 32
2020-01-15 01:49:00,382 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][7155] stderr: umount: /dev/shm: target is busy.
2020-01-15 01:49:00,383 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][7155] retcode: 32
2020-01-15 01:49:11,663 [salt.utils.parsers:1051][WARNING ][3618] Minion received a SIGTERM. Exiting.
2020-01-15 01:49:28,326 [salt.cli.daemons :293 ][INFO    ][1710] Setting up the Salt Minion "ctl01.mcp-odl-ha.local"
2020-01-15 01:49:28,686 [salt.cli.daemons :82  ][INFO    ][1710] Starting up the Salt Minion
2020-01-15 01:49:28,687 [salt.utils.event :1017][INFO    ][1710] Starting pull socket on /var/run/salt/minion/minion_event_dabe51d6a5_pull.ipc
2020-01-15 01:49:29,635 [salt.minion      :976 ][INFO    ][1710] Creating minion process manager
2020-01-15 01:49:32,372 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1710] Executing command ['date', '+%z'] in directory '/root'
2020-01-15 01:49:32,411 [salt.utils.schedule:568 ][INFO    ][1710] Updating job settings for scheduled job: __mine_interval
2020-01-15 01:49:32,413 [salt.minion      :1108][INFO    ][1710] Added mine.update to scheduler
2020-01-15 01:49:32,420 [salt.minion      :1975][INFO    ][1710] Minion is starting as user 'root'
2020-01-15 01:49:32,435 [salt.minion      :2336][INFO    ][1710] Minion is ready to receive requests!
2020-01-15 01:49:57,303 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command test.ping with jid 20200115014957292223
2020-01-15 01:49:57,329 [salt.minion      :1432][INFO    ][1877] Starting a new job with PID 1877
2020-01-15 01:49:57,403 [salt.minion      :1711][INFO    ][1877] Returning information for job: 20200115014957292223
2020-01-15 01:49:58,127 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command pkg.upgrade with jid 20200115014958113069
2020-01-15 01:49:58,158 [salt.minion      :1432][INFO    ][1882] Starting a new job with PID 1882
2020-01-15 01:49:58,270 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1882] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 01:49:59,650 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1882] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2020-01-15 01:50:11,233 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1882] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 01:50:11,344 [salt.minion      :1711][INFO    ][1882] Returning information for job: 20200115014958113069
2020-01-15 01:51:21,282 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command network.connect with jid 20200115015121272460
2020-01-15 01:51:21,305 [salt.minion      :1432][INFO    ][2245] Starting a new job with PID 2245
2020-01-15 01:51:21,330 [salt.minion      :1711][INFO    ][2245] Returning information for job: 20200115015121272460
2020-01-15 01:51:31,960 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command network.connect with jid 20200115015131946734
2020-01-15 01:51:31,988 [salt.minion      :1432][INFO    ][2250] Starting a new job with PID 2250
2020-01-15 01:51:32,009 [salt.minion      :1711][INFO    ][2250] Returning information for job: 20200115015131946734
2020-01-15 01:51:42,601 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command network.connect with jid 20200115015142590828
2020-01-15 01:51:42,613 [salt.minion      :1432][INFO    ][2255] Starting a new job with PID 2255
2020-01-15 01:51:42,623 [salt.minion      :1711][INFO    ][2255] Returning information for job: 20200115015142590828
2020-01-15 01:51:53,226 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command network.connect with jid 20200115015153217230
2020-01-15 01:51:53,240 [salt.minion      :1432][INFO    ][2260] Starting a new job with PID 2260
2020-01-15 01:51:53,251 [salt.minion      :1711][INFO    ][2260] Returning information for job: 20200115015153217230
2020-01-15 01:54:25,609 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command test.ping with jid 20200115015425598681
2020-01-15 01:54:25,639 [salt.minion      :1432][INFO    ][2266] Starting a new job with PID 2266
2020-01-15 01:54:25,711 [salt.minion      :1711][INFO    ][2266] Returning information for job: 20200115015425598681
2020-01-15 01:56:34,289 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115015634275226
2020-01-15 01:56:34,318 [salt.minion      :1432][INFO    ][2272] Starting a new job with PID 2272
2020-01-15 01:56:41,719 [salt.state       :915 ][INFO    ][2272] Loading fresh modules for state activity
2020-01-15 01:56:41,846 [salt.fileclient  :1219][INFO    ][2272] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2020-01-15 01:56:41,891 [salt.fileclient  :1219][INFO    ][2272] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2020-01-15 01:56:42,602 [keyring.backend  :170 ][INFO    ][2272] Loading Windows (alt)
2020-01-15 01:56:42,622 [keyring.backend  :170 ][INFO    ][2272] Loading pyfs
2020-01-15 01:56:42,625 [keyring.backend  :170 ][INFO    ][2272] Loading multi
2020-01-15 01:56:42,625 [keyring.backend  :170 ][INFO    ][2272] Loading Google
2020-01-15 01:56:42,628 [keyring.backend  :170 ][INFO    ][2272] Loading Gnome
2020-01-15 01:56:42,636 [keyring.backend  :170 ][INFO    ][2272] Loading keyczar
2020-01-15 01:56:42,637 [keyring.backend  :170 ][INFO    ][2272] Loading file
2020-01-15 01:56:43,971 [salt.state       :1780][INFO    ][2272] Running state [keepalived] at time 01:56:43.971067
2020-01-15 01:56:43,972 [salt.state       :1813][INFO    ][2272] Executing state pkg.installed for [keepalived]
2020-01-15 01:56:43,973 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 01:56:45,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2020-01-15 01:56:45,657 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 01:56:49,356 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115015649344441
2020-01-15 01:56:49,371 [salt.minion      :1432][INFO    ][2921] Starting a new job with PID 2921
2020-01-15 01:56:49,389 [salt.minion      :1711][INFO    ][2921] Returning information for job: 20200115015649344441
2020-01-15 01:56:50,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 01:56:50,043 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2020-01-15 01:56:59,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 01:56:59,349 [salt.state       :300 ][INFO    ][2272] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1.8ubuntu3.3'
'libsensors4' changed from 'absent' to '1:3.4.0-4'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1.8ubuntu3.3'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.2'
'ipvsadm' changed from 'absent' to '1:1.28-3ubuntu0.18.04.1'
'libnl-route-3-200' changed from 'absent' to '3.2.29-0ubuntu3'

2020-01-15 01:56:59,433 [salt.state       :915 ][INFO    ][2272] Loading fresh modules for state activity
2020-01-15 01:56:59,511 [salt.state       :1951][INFO    ][2272] Completed state [keepalived] at time 01:56:59.511431 duration_in_ms=15540.367
2020-01-15 01:56:59,522 [salt.state       :1780][INFO    ][2272] Running state [lsof] at time 01:56:59.522418
2020-01-15 01:56:59,522 [salt.state       :1813][INFO    ][2272] Executing state pkg.installed for [lsof]
2020-01-15 01:57:00,603 [salt.state       :300 ][INFO    ][2272] All specified packages are already installed
2020-01-15 01:57:00,603 [salt.state       :1951][INFO    ][2272] Completed state [lsof] at time 01:57:00.603853 duration_in_ms=1081.436
2020-01-15 01:57:00,609 [salt.state       :1780][INFO    ][2272] Running state [/etc/keepalived/keepalived.conf] at time 01:57:00.609535
2020-01-15 01:57:00,609 [salt.state       :1813][INFO    ][2272] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2020-01-15 01:57:00,645 [salt.fileclient  :1219][INFO    ][2272] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2020-01-15 01:57:00,703 [salt.state       :300 ][INFO    ][2272] File changed:
New file
2020-01-15 01:57:00,704 [salt.state       :1951][INFO    ][2272] Completed state [/etc/keepalived/keepalived.conf] at time 01:57:00.704039 duration_in_ms=94.504
2020-01-15 01:57:00,706 [salt.state       :1780][INFO    ][2272] Running state [keepalived] at time 01:57:00.705995
2020-01-15 01:57:00,706 [salt.state       :1813][INFO    ][2272] Executing state service.running for [keepalived]
2020-01-15 01:57:00,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2020-01-15 01:57:00,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2020-01-15 01:57:00,780 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2020-01-15 01:57:00,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2020-01-15 01:57:00,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2020-01-15 01:57:00,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2020-01-15 01:57:01,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2272] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2020-01-15 01:57:01,070 [salt.state       :300 ][INFO    ][2272] {'keepalived': True}
2020-01-15 01:57:01,071 [salt.state       :1951][INFO    ][2272] Completed state [keepalived] at time 01:57:01.071686 duration_in_ms=365.689
2020-01-15 01:57:01,076 [salt.minion      :1711][INFO    ][2272] Returning information for job: 20200115015634275226
2020-01-15 02:02:52,054 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command pillar.get with jid 20200115020252045076
2020-01-15 02:02:52,089 [salt.minion      :1432][INFO    ][3582] Starting a new job with PID 3582
2020-01-15 02:02:52,113 [salt.minion      :1711][INFO    ][3582] Returning information for job: 20200115020252045076
2020-01-15 02:09:22,917 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115020922909841
2020-01-15 02:09:22,956 [salt.minion      :1432][INFO    ][3605] Starting a new job with PID 3605
2020-01-15 02:09:30,980 [salt.state       :915 ][INFO    ][3605] Loading fresh modules for state activity
2020-01-15 02:09:31,093 [salt.fileclient  :1219][INFO    ][3605] Fetching file from saltenv 'base', ** done ** 'glusterfs/client.sls'
2020-01-15 02:09:31,189 [salt.fileclient  :1219][INFO    ][3605] Fetching file from saltenv 'base', ** done ** 'glusterfs/map.jinja'
2020-01-15 02:09:31,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:09:32,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command 'systemd-escape -p --suffix=mount /var/lib/glance/images' in directory '/root'
2020-01-15 02:09:32,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command 'systemd-escape -p --suffix=mount /var/lib/keystone/fernet-keys' in directory '/root'
2020-01-15 02:09:32,332 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command 'systemd-escape -p --suffix=mount /var/lib/keystone/credential-keys' in directory '/root'
2020-01-15 02:09:32,792 [keyring.backend  :170 ][INFO    ][3605] Loading Windows (alt)
2020-01-15 02:09:32,806 [keyring.backend  :170 ][INFO    ][3605] Loading pyfs
2020-01-15 02:09:32,807 [keyring.backend  :170 ][INFO    ][3605] Loading multi
2020-01-15 02:09:32,808 [keyring.backend  :170 ][INFO    ][3605] Loading Google
2020-01-15 02:09:32,810 [keyring.backend  :170 ][INFO    ][3605] Loading Gnome
2020-01-15 02:09:32,816 [keyring.backend  :170 ][INFO    ][3605] Loading keyczar
2020-01-15 02:09:32,817 [keyring.backend  :170 ][INFO    ][3605] Loading file
2020-01-15 02:09:33,775 [salt.state       :1780][INFO    ][3605] Running state [glusterfs-client] at time 02:09:33.775704
2020-01-15 02:09:33,776 [salt.state       :1813][INFO    ][3605] Executing state pkg.installed for [glusterfs-client]
2020-01-15 02:09:33,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['apt-cache', '-q', 'policy', 'glusterfs-client'] in directory '/root'
2020-01-15 02:09:34,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:09:37,951 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115020937934699
2020-01-15 02:09:37,980 [salt.minion      :1432][INFO    ][4253] Starting a new job with PID 4253
2020-01-15 02:09:38,034 [salt.minion      :1711][INFO    ][4253] Returning information for job: 20200115020937934699
2020-01-15 02:09:38,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:09:38,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'glusterfs-client'] in directory '/root'
2020-01-15 02:10:08,060 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115021008049196
2020-01-15 02:10:08,074 [salt.minion      :1432][INFO    ][8089] Starting a new job with PID 8089
2020-01-15 02:10:08,094 [salt.minion      :1711][INFO    ][8089] Returning information for job: 20200115021008049196
2020-01-15 02:10:10,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:10:10,392 [salt.state       :300 ][INFO    ][3605] Made the following changes:
'libaio1' changed from 'absent' to '0.3.110-5ubuntu0.1'
'libc-dev' changed from 'absent' to '1'
'libmthca1' changed from 'absent' to '1'
'glusterfs-common' changed from 'absent' to '3.13.2-ubuntu1~bionic2'
'libibverbs1' changed from 'absent' to '22.1-1ubuntu0.1~cloud0'
'ibverbs-providers' changed from 'absent' to '22.1-1ubuntu0.1~cloud0'
'libattr1-dev' changed from 'absent' to '1:2.4.47-2build1'
'libc6-dev' changed from 'absent' to '2.27-3ubuntu1'
'libipathverbs1' changed from 'absent' to '1'
'attr-dev' changed from 'absent' to '1'
'aufs-dev' changed from 'absent' to '1'
'linux-libc-dev' changed from 'absent' to '4.15.0-74.84'
'acl-dev' changed from 'absent' to '1'
'libacl1-dev' changed from 'absent' to '2.2.52-3build1'
'attr' changed from 'absent' to '1:2.4.47-2build1'
'glusterfs-client' changed from 'absent' to '3.13.2-ubuntu1~bionic2'
'manpages-dev' changed from 'absent' to '4.15-1'
'libmlx4-1' changed from 'absent' to '1'
'linux-kernel-headers' changed from 'absent' to '1'
'liburcu6' changed from 'absent' to '0.10.1-1'
'libmlx5-1' changed from 'absent' to '1'
'librdmacm1' changed from 'absent' to '22.1-1ubuntu0.1~cloud0'
'libnes1' changed from 'absent' to '1'
'libc-dev-bin' changed from 'absent' to '2.27-3ubuntu1'
'libcxgb3-1' changed from 'absent' to '1'

2020-01-15 02:10:10,454 [salt.state       :915 ][INFO    ][3605] Loading fresh modules for state activity
2020-01-15 02:10:10,519 [salt.state       :1951][INFO    ][3605] Completed state [glusterfs-client] at time 02:10:10.519007 duration_in_ms=36743.304
2020-01-15 02:10:10,526 [salt.state       :1780][INFO    ][3605] Running state [attr] at time 02:10:10.526455
2020-01-15 02:10:10,526 [salt.state       :1813][INFO    ][3605] Executing state pkg.installed for [attr]
2020-01-15 02:10:11,495 [salt.state       :300 ][INFO    ][3605] All specified packages are already installed
2020-01-15 02:10:11,495 [salt.state       :1951][INFO    ][3605] Completed state [attr] at time 02:10:11.495535 duration_in_ms=969.076
2020-01-15 02:10:11,499 [salt.state       :1780][INFO    ][3605] Running state [/etc/systemd/system/var-lib-glance-images.mount] at time 02:10:11.499340
2020-01-15 02:10:11,499 [salt.state       :1813][INFO    ][3605] Executing state file.managed for [/etc/systemd/system/var-lib-glance-images.mount]
2020-01-15 02:10:11,538 [salt.fileclient  :1219][INFO    ][3605] Fetching file from saltenv 'base', ** done ** 'glusterfs/files/glusterfs-client.mount'
2020-01-15 02:10:11,557 [salt.state       :300 ][INFO    ][3605] File changed:
New file
2020-01-15 02:10:11,557 [salt.state       :1951][INFO    ][3605] Completed state [/etc/systemd/system/var-lib-glance-images.mount] at time 02:10:11.557394 duration_in_ms=58.055
2020-01-15 02:10:11,559 [salt.state       :1780][INFO    ][3605] Running state [var-lib-glance-images.mount] at time 02:10:11.559007
2020-01-15 02:10:11,559 [salt.state       :1813][INFO    ][3605] Executing state service.running for [var-lib-glance-images.mount]
2020-01-15 02:10:11,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'status', 'var-lib-glance-images.mount', '-n', '0'] in directory '/root'
2020-01-15 02:10:11,606 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-active', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:11,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:11,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:11,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-active', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:11,996 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:12,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:12,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:12,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2020-01-15 02:10:12,557 [salt.state       :300 ][INFO    ][3605] {'var-lib-glance-images.mount': True}
2020-01-15 02:10:12,558 [salt.state       :1951][INFO    ][3605] Completed state [var-lib-glance-images.mount] at time 02:10:12.558464 duration_in_ms=999.45
2020-01-15 02:10:12,561 [salt.state       :1780][INFO    ][3605] Running state [/var/lib/glance/images] at time 02:10:12.561156
2020-01-15 02:10:12,562 [salt.state       :1813][INFO    ][3605] Executing state file.directory for [/var/lib/glance/images]
2020-01-15 02:10:12,568 [salt.state       :300 ][INFO    ][3605] Directory /var/lib/glance/images is in the correct state
Directory /var/lib/glance/images updated
2020-01-15 02:10:12,569 [salt.state       :1951][INFO    ][3605] Completed state [/var/lib/glance/images] at time 02:10:12.569317 duration_in_ms=8.163
2020-01-15 02:10:12,569 [salt.state       :1780][INFO    ][3605] Running state [/etc/systemd/system/var-lib-keystone-fernet\x2dkeys.mount] at time 02:10:12.569666
2020-01-15 02:10:12,570 [salt.state       :1813][INFO    ][3605] Executing state file.managed for [/etc/systemd/system/var-lib-keystone-fernet\x2dkeys.mount]
2020-01-15 02:10:12,626 [salt.state       :300 ][INFO    ][3605] File changed:
New file
2020-01-15 02:10:12,627 [salt.state       :1951][INFO    ][3605] Completed state [/etc/systemd/system/var-lib-keystone-fernet\x2dkeys.mount] at time 02:10:12.627086 duration_in_ms=57.418
2020-01-15 02:10:12,629 [salt.state       :1780][INFO    ][3605] Running state [var-lib-keystone-fernet\x2dkeys.mount] at time 02:10:12.629131
2020-01-15 02:10:12,630 [salt.state       :1813][INFO    ][3605] Executing state service.running for [var-lib-keystone-fernet\x2dkeys.mount]
2020-01-15 02:10:12,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'status', 'var-lib-keystone-fernet\\x2dkeys.mount', '-n', '0'] in directory '/root'
2020-01-15 02:10:12,688 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-active', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:12,730 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:12,788 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-active', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,570 [salt.state       :300 ][INFO    ][3605] {'var-lib-keystone-fernet\\x2dkeys.mount': True}
2020-01-15 02:10:13,571 [salt.state       :1951][INFO    ][3605] Completed state [var-lib-keystone-fernet\x2dkeys.mount] at time 02:10:13.570981 duration_in_ms=941.85
2020-01-15 02:10:13,575 [salt.state       :1780][INFO    ][3605] Running state [/var/lib/keystone/fernet-keys] at time 02:10:13.575478
2020-01-15 02:10:13,576 [salt.state       :1813][INFO    ][3605] Executing state file.directory for [/var/lib/keystone/fernet-keys]
2020-01-15 02:10:13,577 [salt.state       :300 ][INFO    ][3605] Directory /var/lib/keystone/fernet-keys is in the correct state
Directory /var/lib/keystone/fernet-keys updated
2020-01-15 02:10:13,578 [salt.state       :1951][INFO    ][3605] Completed state [/var/lib/keystone/fernet-keys] at time 02:10:13.577972 duration_in_ms=2.494
2020-01-15 02:10:13,578 [salt.state       :1780][INFO    ][3605] Running state [/etc/systemd/system/var-lib-keystone-credential\x2dkeys.mount] at time 02:10:13.578269
2020-01-15 02:10:13,578 [salt.state       :1813][INFO    ][3605] Executing state file.managed for [/etc/systemd/system/var-lib-keystone-credential\x2dkeys.mount]
2020-01-15 02:10:13,631 [salt.state       :300 ][INFO    ][3605] File changed:
New file
2020-01-15 02:10:13,631 [salt.state       :1951][INFO    ][3605] Completed state [/etc/systemd/system/var-lib-keystone-credential\x2dkeys.mount] at time 02:10:13.631556 duration_in_ms=53.286
2020-01-15 02:10:13,633 [salt.state       :1780][INFO    ][3605] Running state [var-lib-keystone-credential\x2dkeys.mount] at time 02:10:13.633374
2020-01-15 02:10:13,634 [salt.state       :1813][INFO    ][3605] Executing state service.running for [var-lib-keystone-credential\x2dkeys.mount]
2020-01-15 02:10:13,635 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'status', 'var-lib-keystone-credential\\x2dkeys.mount', '-n', '0'] in directory '/root'
2020-01-15 02:10:13,690 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-active', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:13,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:14,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-active', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:14,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:14,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:14,184 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:14,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3605] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2020-01-15 02:10:14,582 [salt.state       :300 ][INFO    ][3605] {'var-lib-keystone-credential\\x2dkeys.mount': True}
2020-01-15 02:10:14,583 [salt.state       :1951][INFO    ][3605] Completed state [var-lib-keystone-credential\x2dkeys.mount] at time 02:10:14.583486 duration_in_ms=950.113
2020-01-15 02:10:14,586 [salt.state       :1780][INFO    ][3605] Running state [/var/lib/keystone/credential-keys] at time 02:10:14.586247
2020-01-15 02:10:14,587 [salt.state       :1813][INFO    ][3605] Executing state file.directory for [/var/lib/keystone/credential-keys]
2020-01-15 02:10:14,590 [salt.state       :300 ][INFO    ][3605] Directory /var/lib/keystone/credential-keys is in the correct state
Directory /var/lib/keystone/credential-keys updated
2020-01-15 02:10:14,590 [salt.state       :1951][INFO    ][3605] Completed state [/var/lib/keystone/credential-keys] at time 02:10:14.590451 duration_in_ms=4.206
2020-01-15 02:10:14,595 [salt.minion      :1711][INFO    ][3605] Returning information for job: 20200115020922909841
2020-01-15 02:16:59,842 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115021659835161
2020-01-15 02:16:59,876 [salt.minion      :1432][INFO    ][8725] Starting a new job with PID 8725
2020-01-15 02:17:07,946 [salt.state       :915 ][INFO    ][8725] Loading fresh modules for state activity
2020-01-15 02:17:08,060 [salt.fileclient  :1219][INFO    ][8725] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2020-01-15 02:17:08,127 [salt.fileclient  :1219][INFO    ][8725] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2020-01-15 02:17:08,180 [salt.fileclient  :1219][INFO    ][8725] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2020-01-15 02:17:08,657 [keyring.backend  :170 ][INFO    ][8725] Loading Windows (alt)
2020-01-15 02:17:08,670 [keyring.backend  :170 ][INFO    ][8725] Loading pyfs
2020-01-15 02:17:08,672 [keyring.backend  :170 ][INFO    ][8725] Loading multi
2020-01-15 02:17:08,672 [keyring.backend  :170 ][INFO    ][8725] Loading Google
2020-01-15 02:17:08,674 [keyring.backend  :170 ][INFO    ][8725] Loading Gnome
2020-01-15 02:17:08,680 [keyring.backend  :170 ][INFO    ][8725] Loading keyczar
2020-01-15 02:17:08,681 [keyring.backend  :170 ][INFO    ][8725] Loading file
2020-01-15 02:17:09,635 [salt.state       :1780][INFO    ][8725] Running state [memcached] at time 02:17:09.635651
2020-01-15 02:17:09,636 [salt.state       :1813][INFO    ][8725] Executing state pkg.installed for [memcached]
2020-01-15 02:17:09,637 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:17:10,657 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2020-01-15 02:17:11,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:17:14,912 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115021714897175
2020-01-15 02:17:14,925 [salt.minion      :1432][INFO    ][9375] Starting a new job with PID 9375
2020-01-15 02:17:14,944 [salt.minion      :1711][INFO    ][9375] Returning information for job: 20200115021714897175
2020-01-15 02:17:15,502 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:17:15,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2020-01-15 02:17:22,592 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:17:22,671 [salt.state       :300 ][INFO    ][8725] Made the following changes:
'memcached' changed from 'absent' to '1.5.6-0ubuntu1.2'

2020-01-15 02:17:22,733 [salt.state       :915 ][INFO    ][8725] Loading fresh modules for state activity
2020-01-15 02:17:22,819 [salt.state       :1951][INFO    ][8725] Completed state [memcached] at time 02:17:22.819127 duration_in_ms=13183.475
2020-01-15 02:17:22,831 [salt.state       :1780][INFO    ][8725] Running state [python-memcache] at time 02:17:22.831746
2020-01-15 02:17:22,832 [salt.state       :1813][INFO    ][8725] Executing state pkg.installed for [python-memcache]
2020-01-15 02:17:23,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:17:23,956 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2020-01-15 02:17:28,181 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:17:28,247 [salt.state       :300 ][INFO    ][8725] Made the following changes:
'python-memcache' changed from 'absent' to '1.59-1~cloud0'

2020-01-15 02:17:28,315 [salt.state       :915 ][INFO    ][8725] Loading fresh modules for state activity
2020-01-15 02:17:28,397 [salt.state       :1951][INFO    ][8725] Completed state [python-memcache] at time 02:17:28.397414 duration_in_ms=5565.668
2020-01-15 02:17:28,403 [salt.state       :1780][INFO    ][8725] Running state [/etc/memcached.conf] at time 02:17:28.403348
2020-01-15 02:17:28,403 [salt.state       :1813][INFO    ][8725] Executing state file.managed for [/etc/memcached.conf]
2020-01-15 02:17:28,441 [salt.fileclient  :1219][INFO    ][8725] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2020-01-15 02:17:28,481 [salt.state       :300 ][INFO    ][8725] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,11 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +29,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -46,5 +45,8 @@
 # Maximize core file limit
 # -r
 
-# Use a pidfile
--P /var/run/memcached/memcached.pid
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2020-01-15 02:17:28,481 [salt.state       :1951][INFO    ][8725] Completed state [/etc/memcached.conf] at time 02:17:28.481489 duration_in_ms=78.141
2020-01-15 02:17:29,209 [salt.state       :1780][INFO    ][8725] Running state [memcached] at time 02:17:29.209808
2020-01-15 02:17:29,210 [salt.state       :1813][INFO    ][8725] Executing state service.running for [memcached]
2020-01-15 02:17:29,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2020-01-15 02:17:29,246 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2020-01-15 02:17:29,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2020-01-15 02:17:29,303 [salt.state       :300 ][INFO    ][8725] The service memcached is already running
2020-01-15 02:17:29,304 [salt.state       :1951][INFO    ][8725] Completed state [memcached] at time 02:17:29.304620 duration_in_ms=94.813
2020-01-15 02:17:29,305 [salt.state       :1780][INFO    ][8725] Running state [memcached] at time 02:17:29.305163
2020-01-15 02:17:29,305 [salt.state       :1813][INFO    ][8725] Executing state service.mod_watch for [memcached]
2020-01-15 02:17:29,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2020-01-15 02:17:29,328 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8725] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2020-01-15 02:17:29,377 [salt.state       :300 ][INFO    ][8725] {'memcached': True}
2020-01-15 02:17:29,378 [salt.state       :1951][INFO    ][8725] Completed state [memcached] at time 02:17:29.378442 duration_in_ms=73.279
2020-01-15 02:17:29,381 [salt.minion      :1711][INFO    ][8725] Returning information for job: 20200115021659835161
2020-01-15 02:17:30,164 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115021730157214
2020-01-15 02:17:30,196 [salt.minion      :1432][INFO    ][9999] Starting a new job with PID 9999
2020-01-15 02:17:38,825 [salt.state       :915 ][INFO    ][9999] Loading fresh modules for state activity
2020-01-15 02:17:38,882 [salt.fileclient  :1219][INFO    ][9999] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2020-01-15 02:17:38,916 [salt.fileclient  :1219][INFO    ][9999] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2020-01-15 02:17:39,255 [keyring.backend  :170 ][INFO    ][9999] Loading Windows (alt)
2020-01-15 02:17:39,268 [keyring.backend  :170 ][INFO    ][9999] Loading pyfs
2020-01-15 02:17:39,270 [keyring.backend  :170 ][INFO    ][9999] Loading multi
2020-01-15 02:17:39,270 [keyring.backend  :170 ][INFO    ][9999] Loading Google
2020-01-15 02:17:39,272 [keyring.backend  :170 ][INFO    ][9999] Loading Gnome
2020-01-15 02:17:39,277 [keyring.backend  :170 ][INFO    ][9999] Loading keyczar
2020-01-15 02:17:39,277 [keyring.backend  :170 ][INFO    ][9999] Loading file
2020-01-15 02:17:40,205 [salt.state       :1780][INFO    ][9999] Running state [haproxy] at time 02:17:40.204997
2020-01-15 02:17:40,205 [salt.state       :1813][INFO    ][9999] Executing state pkg.installed for [haproxy]
2020-01-15 02:17:40,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:17:41,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2020-01-15 02:17:41,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:17:45,243 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115021745234317
2020-01-15 02:17:45,259 [salt.minion      :1432][INFO    ][10647] Starting a new job with PID 10647
2020-01-15 02:17:45,284 [salt.minion      :1711][INFO    ][10647] Returning information for job: 20200115021745234317
2020-01-15 02:17:45,291 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:17:45,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2020-01-15 02:17:52,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:17:52,703 [salt.state       :300 ][INFO    ][9999] Made the following changes:
'haproxy' changed from 'absent' to '1.8.8-1ubuntu0.9'
'liblua5.3-0' changed from 'absent' to '5.3.3-1ubuntu0.18.04.1'

2020-01-15 02:17:52,760 [salt.state       :915 ][INFO    ][9999] Loading fresh modules for state activity
2020-01-15 02:17:52,815 [salt.state       :1951][INFO    ][9999] Completed state [haproxy] at time 02:17:52.815187 duration_in_ms=12610.191
2020-01-15 02:17:52,823 [salt.state       :1780][INFO    ][9999] Running state [/etc/default/haproxy] at time 02:17:52.822983
2020-01-15 02:17:52,823 [salt.state       :1813][INFO    ][9999] Executing state file.managed for [/etc/default/haproxy]
2020-01-15 02:17:52,863 [salt.fileclient  :1219][INFO    ][9999] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2020-01-15 02:17:52,867 [salt.state       :300 ][INFO    ][9999] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2020-01-15 02:17:52,868 [salt.state       :1951][INFO    ][9999] Completed state [/etc/default/haproxy] at time 02:17:52.867985 duration_in_ms=45.001
2020-01-15 02:17:52,869 [salt.state       :1780][INFO    ][9999] Running state [/etc/haproxy/haproxy.cfg] at time 02:17:52.869251
2020-01-15 02:17:52,869 [salt.state       :1813][INFO    ][9999] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2020-01-15 02:17:52,891 [salt.fileclient  :1219][INFO    ][9999] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2020-01-15 02:17:53,053 [salt.state       :300 ][INFO    ][9999] File changed:
--- 
+++ 
@@ -1,37 +1,200 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin expose-fd listeners
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	# An alternative list with additional directives can be obtained from
-	#  https://mozilla.github.io/server-side-tls/ssl-config-generator/?server=haproxy
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:RSA+AESGCM:RSA+AES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen keystone_public_api
+  bind 192.168.10.35:5000 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:5000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:5000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:5000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen nova_api
+  bind 192.168.10.35:8774 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8774 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8774 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8774 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen placement_api
+  bind 192.168.10.35:8778 
+  
+  mode http
+  balance roundrobin
+  option httpclose
+  option httplog
+  option httpchk GET /
+  http-check expect rstatus (401|200)
+  server ctl01 192.168.10.36:8778 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8778 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8778 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen keystone_admin_api
+  bind 192.168.10.35:35357 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:35357 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:35357 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:35357 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen cinder_api
+  bind 192.168.10.35:8776 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8776 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8776 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8776 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen glance_registry_api
+  bind 192.168.10.35:9191 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 192.168.10.36:9191 check
+  server ctl02 192.168.10.37:9191 check
+  server ctl03 192.168.10.38:9191 check
+
+listen heat_cfn_api
+  bind 192.168.10.35:8000 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen nova_novnc
+  bind 192.168.10.35:6080 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 192.168.10.36:6080 check
+  server ctl02 192.168.10.37:6080 check
+  server ctl03 192.168.10.38:6080 check
+
+listen designate_api
+  bind 192.168.10.35:9001 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9001 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9001 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen glance_api
+  bind 192.168.10.35:9292 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9292 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9292 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9292 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen heat_api
+  bind 192.168.10.35:8004 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8004 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8004 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8004 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen barbican-api
+  bind 192.168.10.35:9311 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9311 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9311 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9311 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen nova_metadata_api
+  bind 192.168.10.35:8775 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8775 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8775 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8775 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen barbican-admin-api
+  bind 192.168.10.35:9312 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9312 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9312 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9312 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen neutron_api
+  bind 192.168.10.35:9696 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9696 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9696 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9696 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2020-01-15 02:17:53,054 [salt.state       :1951][INFO    ][9999] Completed state [/etc/haproxy/haproxy.cfg] at time 02:17:53.054183 duration_in_ms=184.931
2020-01-15 02:17:53,055 [salt.state       :1780][INFO    ][9999] Running state [/etc/haproxy/ssl] at time 02:17:53.055121
2020-01-15 02:17:53,055 [salt.state       :1813][INFO    ][9999] Executing state file.directory for [/etc/haproxy/ssl]
2020-01-15 02:17:53,060 [salt.state       :300 ][INFO    ][9999] {'/etc/haproxy/ssl': 'New Dir'}
2020-01-15 02:17:53,060 [salt.state       :1951][INFO    ][9999] Completed state [/etc/haproxy/ssl] at time 02:17:53.060788 duration_in_ms=5.666
2020-01-15 02:17:53,061 [salt.state       :1780][INFO    ][9999] Running state [/etc/haproxy/errors/429.http11] at time 02:17:53.061700
2020-01-15 02:17:53,062 [salt.state       :1813][INFO    ][9999] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2020-01-15 02:17:53,086 [salt.fileclient  :1219][INFO    ][9999] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2020-01-15 02:17:53,095 [salt.state       :300 ][INFO    ][9999] File changed:
New file
2020-01-15 02:17:53,095 [salt.state       :1951][INFO    ][9999] Completed state [/etc/haproxy/errors/429.http11] at time 02:17:53.095667 duration_in_ms=33.908
2020-01-15 02:17:53,097 [salt.state       :1780][INFO    ][9999] Running state [haproxy_status_packages] at time 02:17:53.096963
2020-01-15 02:17:53,097 [salt.state       :1813][INFO    ][9999] Executing state pkg.installed for [haproxy_status_packages]
2020-01-15 02:17:54,142 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:17:54,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2020-01-15 02:17:59,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:17:59,508 [salt.state       :300 ][INFO    ][9999] Made the following changes:
'socat' changed from 'absent' to '1.7.3.2-2ubuntu2'

2020-01-15 02:17:59,581 [salt.state       :915 ][INFO    ][9999] Loading fresh modules for state activity
2020-01-15 02:17:59,656 [salt.state       :1951][INFO    ][9999] Completed state [haproxy_status_packages] at time 02:17:59.656686 duration_in_ms=6559.718
2020-01-15 02:17:59,661 [salt.state       :1780][INFO    ][9999] Running state [/usr/bin/haproxy-status.sh] at time 02:17:59.661812
2020-01-15 02:17:59,662 [salt.state       :1813][INFO    ][9999] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2020-01-15 02:17:59,691 [salt.fileclient  :1219][INFO    ][9999] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2020-01-15 02:17:59,727 [salt.state       :300 ][INFO    ][9999] File changed:
New file
2020-01-15 02:17:59,728 [salt.state       :1951][INFO    ][9999] Completed state [/usr/bin/haproxy-status.sh] at time 02:17:59.728317 duration_in_ms=66.506
2020-01-15 02:17:59,732 [salt.state       :1780][INFO    ][9999] Running state [net.ipv4.ip_nonlocal_bind] at time 02:17:59.732532
2020-01-15 02:17:59,733 [salt.state       :1813][INFO    ][9999] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2020-01-15 02:17:59,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2020-01-15 02:17:59,764 [salt.state       :300 ][INFO    ][9999] {'net.ipv4.ip_nonlocal_bind': 1}
2020-01-15 02:17:59,765 [salt.state       :1951][INFO    ][9999] Completed state [net.ipv4.ip_nonlocal_bind] at time 02:17:59.765730 duration_in_ms=33.198
2020-01-15 02:18:00,590 [salt.state       :1780][INFO    ][9999] Running state [haproxy] at time 02:18:00.590091
2020-01-15 02:18:00,590 [salt.state       :1813][INFO    ][9999] Executing state service.running for [haproxy]
2020-01-15 02:18:00,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2020-01-15 02:18:00,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2020-01-15 02:18:00,669 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2020-01-15 02:18:00,704 [salt.state       :300 ][INFO    ][9999] The service haproxy is already running
2020-01-15 02:18:00,705 [salt.state       :1951][INFO    ][9999] Completed state [haproxy] at time 02:18:00.705280 duration_in_ms=115.19
2020-01-15 02:18:00,705 [salt.state       :1780][INFO    ][9999] Running state [haproxy] at time 02:18:00.705874
2020-01-15 02:18:00,706 [salt.state       :1813][INFO    ][9999] Executing state service.mod_watch for [haproxy]
2020-01-15 02:18:00,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2020-01-15 02:18:00,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9999] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2020-01-15 02:18:00,874 [salt.state       :300 ][INFO    ][9999] {'haproxy': True}
2020-01-15 02:18:00,875 [salt.state       :1951][INFO    ][9999] Completed state [haproxy] at time 02:18:00.875229 duration_in_ms=169.352
2020-01-15 02:18:00,881 [salt.minion      :1711][INFO    ][9999] Returning information for job: 20200115021730157214
2020-01-15 02:18:01,660 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command service.status with jid 20200115021801650557
2020-01-15 02:18:01,691 [salt.minion      :1432][INFO    ][11421] Starting a new job with PID 11421
2020-01-15 02:18:02,162 [keyring.backend  :170 ][INFO    ][11421] Loading Windows (alt)
2020-01-15 02:18:02,173 [keyring.backend  :170 ][INFO    ][11421] Loading pyfs
2020-01-15 02:18:02,175 [keyring.backend  :170 ][INFO    ][11421] Loading multi
2020-01-15 02:18:02,176 [keyring.backend  :170 ][INFO    ][11421] Loading Google
2020-01-15 02:18:02,177 [keyring.backend  :170 ][INFO    ][11421] Loading Gnome
2020-01-15 02:18:02,182 [keyring.backend  :170 ][INFO    ][11421] Loading keyczar
2020-01-15 02:18:02,183 [keyring.backend  :170 ][INFO    ][11421] Loading file
2020-01-15 02:18:02,801 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11421] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2020-01-15 02:18:02,825 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11421] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2020-01-15 02:18:02,863 [salt.minion      :1711][INFO    ][11421] Returning information for job: 20200115021801650557
2020-01-15 02:18:03,621 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command service.restart with jid 20200115021803612365
2020-01-15 02:18:03,661 [salt.minion      :1432][INFO    ][11431] Starting a new job with PID 11431
2020-01-15 02:18:04,124 [keyring.backend  :170 ][INFO    ][11431] Loading Windows (alt)
2020-01-15 02:18:04,136 [keyring.backend  :170 ][INFO    ][11431] Loading pyfs
2020-01-15 02:18:04,138 [keyring.backend  :170 ][INFO    ][11431] Loading multi
2020-01-15 02:18:04,139 [keyring.backend  :170 ][INFO    ][11431] Loading Google
2020-01-15 02:18:04,140 [keyring.backend  :170 ][INFO    ][11431] Loading Gnome
2020-01-15 02:18:04,145 [keyring.backend  :170 ][INFO    ][11431] Loading keyczar
2020-01-15 02:18:04,145 [keyring.backend  :170 ][INFO    ][11431] Loading file
2020-01-15 02:18:04,782 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11431] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2020-01-15 02:18:04,858 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11431] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2020-01-15 02:18:04,951 [salt.minion      :1711][INFO    ][11431] Returning information for job: 20200115021803612365
2020-01-15 02:18:05,666 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115021805656032
2020-01-15 02:18:05,699 [salt.minion      :1432][INFO    ][11481] Starting a new job with PID 11481
2020-01-15 02:18:12,768 [salt.state       :915 ][INFO    ][11481] Loading fresh modules for state activity
2020-01-15 02:18:12,880 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/server.sls'
2020-01-15 02:18:13,188 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2020-01-15 02:18:13,231 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2020-01-15 02:18:13,271 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2020-01-15 02:18:13,407 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2020-01-15 02:18:13,540 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2020-01-15 02:18:13,702 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2020-01-15 02:18:13,927 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2020-01-15 02:18:14,000 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2020-01-15 02:18:14,090 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/db/offline_sync.sls'
2020-01-15 02:18:14,182 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/_ssl/mysql.sls'
2020-01-15 02:18:14,299 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/_ssl/rabbitmq.sls'
2020-01-15 02:18:14,788 [keyring.backend  :170 ][INFO    ][11481] Loading Windows (alt)
2020-01-15 02:18:14,802 [keyring.backend  :170 ][INFO    ][11481] Loading pyfs
2020-01-15 02:18:14,804 [keyring.backend  :170 ][INFO    ][11481] Loading multi
2020-01-15 02:18:14,805 [keyring.backend  :170 ][INFO    ][11481] Loading Google
2020-01-15 02:18:14,806 [keyring.backend  :170 ][INFO    ][11481] Loading Gnome
2020-01-15 02:18:14,812 [keyring.backend  :170 ][INFO    ][11481] Loading keyczar
2020-01-15 02:18:14,813 [keyring.backend  :170 ][INFO    ][11481] Loading file
2020-01-15 02:18:15,745 [salt.state       :1780][INFO    ][11481] Running state [keystone] at time 02:18:15.745560
2020-01-15 02:18:15,746 [salt.state       :1813][INFO    ][11481] Executing state pkg.installed for [keystone]
2020-01-15 02:18:15,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:18:16,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['apt-cache', '-q', 'policy', 'keystone'] in directory '/root'
2020-01-15 02:18:17,330 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:18:20,746 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115021820728632
2020-01-15 02:18:20,779 [salt.minion      :1432][INFO    ][12149] Starting a new job with PID 12149
2020-01-15 02:18:20,829 [salt.minion      :1711][INFO    ][12149] Returning information for job: 20200115021820728632
2020-01-15 02:18:21,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:18:22,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keystone'] in directory '/root'
2020-01-15 02:18:50,881 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115021850862907
2020-01-15 02:18:50,916 [salt.minion      :1432][INFO    ][13530] Starting a new job with PID 13530
2020-01-15 02:18:50,980 [salt.minion      :1711][INFO    ][13530] Returning information for job: 20200115021850862907
2020-01-15 02:19:21,057 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115021921038833
2020-01-15 02:19:21,095 [salt.minion      :1432][INFO    ][14167] Starting a new job with PID 14167
2020-01-15 02:19:21,138 [salt.minion      :1711][INFO    ][14167] Returning information for job: 20200115021921038833
2020-01-15 02:19:51,171 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115021951152294
2020-01-15 02:19:51,197 [salt.minion      :1432][INFO    ][15366] Starting a new job with PID 15366
2020-01-15 02:19:51,263 [salt.minion      :1711][INFO    ][15366] Returning information for job: 20200115021951152294
2020-01-15 02:19:53,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:19:53,590 [salt.state       :300 ][INFO    ][11481] Made the following changes:
'python3-keystone' changed from 'absent' to '2:15.0.0-0ubuntu1.2~cloud0'
'python3-contextlib2' changed from 'absent' to '0.5.5-1'
'python3-flask-restful' changed from 'absent' to '0.3.6-1'
'xmlsec1' changed from 'absent' to '1.2.25-1build1'
'python3-aniso8601' changed from 'absent' to '2.0.0-1'
'python3-paste' changed from 'absent' to '2.0.3+dfsg-4ubuntu1'
'python3-oslo.serialization' changed from 'absent' to '2.28.2-0ubuntu1~cloud0'
'python3-passlib' changed from 'absent' to '1.7.1-1'
'python3-testresources' changed from 'absent' to '2.0.0-2'
'python3-sqlalchemy' changed from 'absent' to '1.2.15+ds1-1~cloud0'
'python3-pyinotify' changed from 'absent' to '0.9.6-1'
'python3.7-lib2to3' changed from 'absent' to '1'
'python3-msgpack' changed from 'absent' to '0.5.6-1'
'python3-defusedxml' changed from 'absent' to '0.5.0-1ubuntu1'
'python3-oslo.upgradecheck' changed from 'absent' to '0.2.1-0ubuntu1~cloud0'
'apache2' changed from 'absent' to '2.4.29-1ubuntu4.11'
'python3.6-distutils' changed from 'absent' to '1'
'python3-iso8601' changed from 'absent' to '0.1.11-1'
'python3-oslo-utils' changed from 'absent' to '1'
'python3-mako' changed from 'absent' to '1.0.7+ds1-1'
'python3-rfc3986' changed from 'absent' to '1.2.0-0ubuntu1~cloud0'
'python3-os-service-types' changed from 'absent' to '1.6.0-0ubuntu1~cloud0'
'python3.6-lxml' changed from 'absent' to '1'
'python3-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1'
'keystone-common' changed from 'absent' to '2:15.0.0-0ubuntu1.2~cloud0'
'python3-monotonic' changed from 'absent' to '1.5-0ubuntu1~cloud0'
'python3-kombu' changed from 'absent' to '4.1.0-1'
'apache2-bin' changed from 'absent' to '2.4.29-1ubuntu4.11'
'python3-oslo.cache' changed from 'absent' to '1.33.2-0ubuntu1~cloud0'
'python3-keystoneauth1' changed from 'absent' to '3.13.1-0ubuntu1~cloud0'
'python3-keyring' changed from 'absent' to '10.6.0-1'
'python3-cachetools' changed from 'absent' to '2.0.0-2'
'python3-lib2to3' changed from 'absent' to '3.6.9-1~18.04'
'python3-futurist' changed from 'absent' to '1.6.0-0ubuntu1'
'libapache2-mod-wsgi-py3' changed from 'absent' to '4.5.17-1'
'python3.6-lib2to3' changed from 'absent' to '1'
'apache2-utils' changed from 'absent' to '2.4.29-1ubuntu4.11'
'python3-eventlet' changed from 'absent' to '0.24.1-0ubuntu3.1~cloud0'
'python3-migrate' changed from 'absent' to '0.11.0-5~cloud0'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.15+ds1-1~cloud0'
'python3-oslo.context' changed from 'absent' to '1:2.22.1-0ubuntu1~cloud0'
'python3-posix-ipc' changed from 'absent' to '0.9.8-3'
'python3-sqlparse' changed from 'absent' to '0.2.4-0.1'
'python3-dnspython' changed from 'absent' to '1.15.0-1'
'python3-testtools' changed from 'absent' to '2.3.0-3ubuntu2'
'python3-tz' changed from 'absent' to '2018.3-2'
'python3-babel' changed from 'absent' to '2.6.0+dfsg.1-1~cloud0'
'python3-testscenarios' changed from 'absent' to '0.5.0-2~cloud0'
'python3-pil' changed from 'absent' to '5.1.0-1'
'python3-pyparsing' changed from 'absent' to '2.2.0+dfsg1-2'
'python3-dogpile.cache' changed from 'absent' to '0.6.2-5'
'keystone' changed from 'absent' to '2:15.0.0-0ubuntu1.2~cloud0'
'python3-tenacity' changed from 'absent' to '5.0.3-0ubuntu1~cloud0'
'python3-webencodings' changed from 'absent' to '0.5-2'
'python3-netaddr' changed from 'absent' to '0.7.19-1'
'python3-oslo.i18n' changed from 'absent' to '3.23.1-0ubuntu1~cloud0'
'python3-pillow' changed from 'absent' to '1'
'python3-oslo.utils' changed from 'absent' to '3.40.3-0ubuntu1~cloud0'
'python3-dateutil' changed from 'absent' to '2.7.3-3~cloud0'
'libaprutil1-ldap' changed from 'absent' to '1.6.1-2'
'python3-oslo.db' changed from 'absent' to '4.44.0-0ubuntu1~cloud0'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.6.1-2'
'python3-debtcollector' changed from 'absent' to '1.20.0-2~cloud0'
'python3-prettytable' changed from 'absent' to '0.7.2-3'
'python3.5-ldap' changed from 'absent' to '1'
'python3-tempita' changed from 'absent' to '0.5.2-2'
'python3-simplejson' changed from 'absent' to '3.13.2-1'
'python3-crypto' changed from 'absent' to '2.6.1-8ubuntu2'
'python3-pyldap' changed from 'absent' to '1'
'python3.6-ldap' changed from 'absent' to '1'
'httpd-cgi' changed from 'absent' to '1'
'python3-pastescript' changed from 'absent' to '2.0.2-2'
'alembic' changed from 'absent' to '1.0.0-2ubuntu2~cloud0'
'python3-oslo.messaging' changed from 'absent' to '9.5.0-0ubuntu1~cloud0'
'libapr1' changed from 'absent' to '1.6.3-2'
'python3-decorator' changed from 'absent' to '4.3.0-1.1~cloud0'
'python3-oslo.log' changed from 'absent' to '3.42.3-0ubuntu1~cloud0'
'python3.5-greenlet' changed from 'absent' to '1'
'python3-docutils' changed from 'absent' to '0.14+dfsg-3'
'python3-pycadf' changed from 'absent' to '2.7.0-0ubuntu1'
'python3-funcsigs' changed from 'absent' to '1.0.2-4'
'python3-html5lib' changed from 'absent' to '0.999999999-1'
'python3-roman' changed from 'absent' to '2.0.0-3'
'httpd' changed from 'absent' to '1'
'python3-keyrings.alt' changed from 'absent' to '3.0-1'
'python3-pysaml2' changed from 'absent' to '4.5.0+dfsg1-0ubuntu2~cloud0'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-4'
'python3-wrapt' changed from 'absent' to '1.9.0-3'
'python3-distutils' changed from 'absent' to '3.6.9-1~18.04'
'python3-mimeparse' changed from 'absent' to '0.1.4-3.1'
'pycadf-common' changed from 'absent' to '2.7.0-0ubuntu1'
'python3-statsd' changed from 'absent' to '3.2.1-2'
'python3-fixtures' changed from 'absent' to '3.0.0-2'
'apache2-data' changed from 'absent' to '2.4.29-1ubuntu4.11'
'python3-unittest2' changed from 'absent' to '1.1.0-6.1'
'python3-extras' changed from 'absent' to '1.0.0-3'
'python3-oslo-log' changed from 'absent' to '1'
'apache2-api-20120211-openssl1.1' changed from 'absent' to '1'
'python3-oslo.config' changed from 'absent' to '1:6.8.1-0ubuntu1~cloud0'
'python3-webob' changed from 'absent' to '1:1.8.5-1~cloud0'
'python3-olefile' changed from 'absent' to '0.45.1-1'
'python3.8-distutils' changed from 'absent' to '1'
'python3-future' changed from 'absent' to '0.15.2-4ubuntu2'
'python3-pastedeploy' changed from 'absent' to '1.5.2-4'
'python3-linecache2' changed from 'absent' to '1.0.0-3'
'python3-routes' changed from 'absent' to '2.4.1-1'
'python3-setuptools' changed from 'absent' to '40.8.0-1~cloud0'
'python3.7-distutils' changed from 'absent' to '1'
'python3-oslo.concurrency' changed from 'absent' to '3.29.1-0ubuntu1~cloud0'
'python3-lxml' changed from 'absent' to '4.2.1-1ubuntu0.1'
'python3-osprofiler' changed from 'absent' to '2.3.0-3~cloud0'
'python3-pygments' changed from 'absent' to '2.2.0+dfsg-1'
'python3-greenlet' changed from 'absent' to '0.4.12-2'
'python3-scrypt' changed from 'absent' to '0.8.0-0ubuntu3'
'python3-keystonemiddleware' changed from 'absent' to '6.0.0-0ubuntu1~cloud0'
'python3-keystoneclient' changed from 'absent' to '1:3.19.0-0ubuntu1~cloud0'
'python3-pbr' changed from 'absent' to '3.1.1-3ubuntu3'
'python3.8-lib2to3' changed from 'absent' to '1'
'python3-fasteners' changed from 'absent' to '0.12.0-3'
'python3-amqp' changed from 'absent' to '2.4.0-1~cloud0'
'httpd-wsgi' changed from 'absent' to '1'
'python3-repoze.lru' changed from 'absent' to '0.7-1'
'python3-itsdangerous' changed from 'absent' to '0.24+dfsg1-2'
'python3-oslo.policy' changed from 'absent' to '2.1.1-0ubuntu1~cloud0'
'python3-flask' changed from 'absent' to '1.0.2-3~cloud0'
'python3-oslo.middleware' changed from 'absent' to '3.37.1-0ubuntu1~cloud0'
'python3-secretstorage' changed from 'absent' to '2.3.1-2'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.6.1-2'
'python3-memcache' changed from 'absent' to '1.59-1~cloud0'
'python3-bcrypt' changed from 'absent' to '3.1.4-2'
'liblua5.2-0' changed from 'absent' to '5.2.4-1.1build1'
'python3-oslo.service' changed from 'absent' to '1.38.0-0ubuntu1~cloud0'
'python3-anyjson' changed from 'absent' to '0.3.3-1build1'
'python3-stevedore' changed from 'absent' to '1:1.30.1-0ubuntu1~cloud0'
'python3-traceback2' changed from 'absent' to '1.4.0-5'
'python3-vine' changed from 'absent' to '1.1.4+dfsg-2'
'python3-ldap' changed from 'absent' to '3.0.0-1ubuntu0.1'
'python3-alembic' changed from 'absent' to '1.0.0-2ubuntu2~cloud0'
'python3.6-crypto' changed from 'absent' to '1'
'python3-bs4' changed from 'absent' to '4.6.0-1'
'python3-pymysql' changed from 'absent' to '0.8.0-1'

2020-01-15 02:19:53,665 [salt.state       :915 ][INFO    ][11481] Loading fresh modules for state activity
2020-01-15 02:19:53,714 [salt.state       :1951][INFO    ][11481] Completed state [keystone] at time 02:19:53.714183 duration_in_ms=97968.625
2020-01-15 02:19:53,722 [salt.state       :1780][INFO    ][11481] Running state [python3-memcache] at time 02:19:53.722464
2020-01-15 02:19:53,722 [salt.state       :1813][INFO    ][11481] Executing state pkg.installed for [python3-memcache]
2020-01-15 02:19:54,801 [salt.state       :300 ][INFO    ][11481] All specified packages are already installed
2020-01-15 02:19:54,802 [salt.state       :1951][INFO    ][11481] Completed state [python3-memcache] at time 02:19:54.801938 duration_in_ms=1079.473
2020-01-15 02:19:54,802 [salt.state       :1780][INFO    ][11481] Running state [python3-openstackclient] at time 02:19:54.802364
2020-01-15 02:19:54,802 [salt.state       :1813][INFO    ][11481] Executing state pkg.installed for [python3-openstackclient]
2020-01-15 02:19:54,830 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:19:54,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python3-openstackclient'] in directory '/root'
2020-01-15 02:20:13,862 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:20:13,987 [salt.state       :300 ][INFO    ][11481] Made the following changes:
'python3-openstacksdk' changed from 'absent' to '0.26.0-0ubuntu1~cloud0'
'python3-cmd2' changed from 'absent' to '0.7.9-0ubuntu1'
'python3-cliff' changed from 'absent' to '2.14.1-0ubuntu1~cloud0'
'python3-munch' changed from 'absent' to '2.2.0-1ubuntu2'
'python3-unicodecsv' changed from 'absent' to '0.14.1-1'
'python3-jmespath' changed from 'absent' to '0.9.3-1ubuntu1'
'python3-openstackclient' changed from 'absent' to '3.18.0-0ubuntu1~cloud0'
'python3-deprecation' changed from 'absent' to '1.0.1-0ubuntu1'
'python3-requestsexceptions' changed from 'absent' to '1.3.0-3'
'python3-glanceclient' changed from 'absent' to '1:2.16.0-0ubuntu1~cloud0'
'python3-appdirs' changed from 'absent' to '1.4.3-1'
'python3-osc-lib' changed from 'absent' to '1.12.1-0ubuntu1~cloud0'
'python3-novaclient' changed from 'absent' to '2:13.0.0-0ubuntu1~cloud0'
'python3-pyperclip' changed from 'absent' to '1.6.0-1'
'python3-cinderclient' changed from 'absent' to '1:4.1.0-0ubuntu1~cloud0'
'python3-neutronclient' changed from 'absent' to '1:6.7.0-0ubuntu1'
'python3-warlock' changed from 'absent' to '1.2.0-2'
'python3-os-client-config' changed from 'absent' to '1.29.0-0ubuntu1'

2020-01-15 02:20:14,055 [salt.state       :915 ][INFO    ][11481] Loading fresh modules for state activity
2020-01-15 02:20:14,150 [salt.state       :1951][INFO    ][11481] Completed state [python3-openstackclient] at time 02:20:14.149885 duration_in_ms=19347.518
2020-01-15 02:20:14,169 [salt.state       :1780][INFO    ][11481] Running state [apache2] at time 02:20:14.169758
2020-01-15 02:20:14,170 [salt.state       :1813][INFO    ][11481] Executing state pkg.installed for [apache2]
2020-01-15 02:20:15,354 [salt.state       :300 ][INFO    ][11481] All specified packages are already installed
2020-01-15 02:20:15,355 [salt.state       :1951][INFO    ][11481] Completed state [apache2] at time 02:20:15.355233 duration_in_ms=1185.476
2020-01-15 02:20:15,356 [salt.state       :1780][INFO    ][11481] Running state [openssl] at time 02:20:15.356418
2020-01-15 02:20:15,356 [salt.state       :1813][INFO    ][11481] Executing state pkg.installed for [openssl]
2020-01-15 02:20:15,367 [salt.state       :300 ][INFO    ][11481] All specified packages are already installed
2020-01-15 02:20:15,367 [salt.state       :1951][INFO    ][11481] Completed state [openssl] at time 02:20:15.367847 duration_in_ms=11.429
2020-01-15 02:20:15,369 [salt.state       :1780][INFO    ][11481] Running state [a2enmod ssl] at time 02:20:15.369490
2020-01-15 02:20:15,369 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [a2enmod ssl]
2020-01-15 02:20:15,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command 'a2enmod ssl' in directory '/root'
2020-01-15 02:20:15,484 [salt.state       :300 ][INFO    ][11481] {'pid': 15940, 'retcode': 0, 'stderr': '', 'stdout': 'Considering dependency setenvif for ssl:\nModule setenvif already enabled\nConsidering dependency mime for ssl:\nModule mime already enabled\nConsidering dependency socache_shmcb for ssl:\nEnabling module socache_shmcb.\nEnabling module ssl.\nSee /usr/share/doc/apache2/README.Debian.gz on how to configure SSL and create self-signed certificates.\nTo activate the new configuration, you need to run:\n  systemctl restart apache2'}
2020-01-15 02:20:15,485 [salt.state       :1951][INFO    ][11481] Completed state [a2enmod ssl] at time 02:20:15.485318 duration_in_ms=115.824
2020-01-15 02:20:15,486 [salt.state       :1780][INFO    ][11481] Running state [a2enmod rewrite] at time 02:20:15.486857
2020-01-15 02:20:15,487 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [a2enmod rewrite]
2020-01-15 02:20:15,488 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command 'a2enmod rewrite' in directory '/root'
2020-01-15 02:20:15,627 [salt.state       :300 ][INFO    ][11481] {'pid': 15953, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  systemctl restart apache2'}
2020-01-15 02:20:15,629 [salt.state       :1951][INFO    ][11481] Completed state [a2enmod rewrite] at time 02:20:15.629210 duration_in_ms=142.344
2020-01-15 02:20:15,632 [salt.state       :1780][INFO    ][11481] Running state [libapache2-mod-wsgi-py3] at time 02:20:15.632413
2020-01-15 02:20:15,633 [salt.state       :1813][INFO    ][11481] Executing state pkg.installed for [libapache2-mod-wsgi-py3]
2020-01-15 02:20:15,660 [salt.state       :300 ][INFO    ][11481] All specified packages are already installed
2020-01-15 02:20:15,661 [salt.state       :1951][INFO    ][11481] Completed state [libapache2-mod-wsgi-py3] at time 02:20:15.661290 duration_in_ms=28.876
2020-01-15 02:20:15,663 [salt.state       :1780][INFO    ][11481] Running state [a2enmod wsgi] at time 02:20:15.663036
2020-01-15 02:20:15,664 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [a2enmod wsgi]
2020-01-15 02:20:15,665 [salt.state       :300 ][INFO    ][11481] /etc/apache2/mods-enabled/wsgi.load exists
2020-01-15 02:20:15,666 [salt.state       :1951][INFO    ][11481] Completed state [a2enmod wsgi] at time 02:20:15.666350 duration_in_ms=3.315
2020-01-15 02:20:15,677 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:20:15.677583
2020-01-15 02:20:15,678 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2020-01-15 02:20:15,680 [salt.state       :300 ][INFO    ][11481] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2020-01-15 02:20:15,681 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:20:15.681006 duration_in_ms=3.423
2020-01-15 02:20:15,682 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:20:15.681948
2020-01-15 02:20:15,683 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2020-01-15 02:20:15,684 [salt.state       :300 ][INFO    ][11481] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2020-01-15 02:20:15,685 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:20:15.685135 duration_in_ms=3.186
2020-01-15 02:20:15,686 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:20:15.686105
2020-01-15 02:20:15,687 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2020-01-15 02:20:15,688 [salt.state       :300 ][INFO    ][11481] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2020-01-15 02:20:15,689 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:20:15.689198 duration_in_ms=3.093
2020-01-15 02:20:15,690 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:20:15.690179
2020-01-15 02:20:15,691 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2020-01-15 02:20:15,692 [salt.state       :300 ][INFO    ][11481] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2020-01-15 02:20:15,693 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:20:15.693187 duration_in_ms=3.008
2020-01-15 02:20:15,699 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 02:20:15.699672
2020-01-15 02:20:15,700 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2020-01-15 02:20:15,768 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_event.conf'
2020-01-15 02:20:15,987 [salt.state       :300 ][INFO    ][11481] File changed:
--- 
+++ 
@@ -5,14 +5,15 @@
 # ThreadsPerChild: constant number of worker threads in each server process
 # MaxRequestWorkers: maximum number of worker threads
 # MaxConnectionsPerChild: maximum number of requests a server process serves
+
 <IfModule mpm_event_module>
-	StartServers			 2
-	MinSpareThreads		 25
-	MaxSpareThreads		 75
-	ThreadLimit			 64
-	ThreadsPerChild		 25
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareThreads         25
+    MaxSpareThreads         75
+    ThreadLimit             64
+    ThreadsPerChild         25
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2020-01-15 02:20:15,990 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 02:20:15.990497 duration_in_ms=290.823
2020-01-15 02:20:15,993 [salt.state       :1780][INFO    ][11481] Running state [a2enmod mpm_event] at time 02:20:15.993611
2020-01-15 02:20:15,994 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [a2enmod mpm_event]
2020-01-15 02:20:15,995 [salt.state       :300 ][INFO    ][11481] /etc/apache2/mods-enabled/mpm_event.load exists
2020-01-15 02:20:15,996 [salt.state       :1951][INFO    ][11481] Completed state [a2enmod mpm_event] at time 02:20:15.996499 duration_in_ms=2.887
2020-01-15 02:20:15,999 [salt.state       :1780][INFO    ][11481] Running state [apache_server_service_task] at time 02:20:15.999856
2020-01-15 02:20:16,000 [salt.state       :1813][INFO    ][11481] Executing state test.show_notification for [apache_server_service_task]
2020-01-15 02:20:16,001 [salt.state       :300 ][INFO    ][11481] Running apache.server.service
2020-01-15 02:20:16,002 [salt.state       :1951][INFO    ][11481] Completed state [apache_server_service_task] at time 02:20:16.002255 duration_in_ms=2.4
2020-01-15 02:20:16,003 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/ports.conf] at time 02:20:16.003797
2020-01-15 02:20:16,004 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/apache2/ports.conf]
2020-01-15 02:20:16,040 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2020-01-15 02:20:16,165 [salt.state       :300 ][INFO    ][11481] File changed:
--- 
+++ 
@@ -2,14 +2,14 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
+Listen 0.0.0.0:80
 
 <IfModule ssl_module>
-	Listen 443
+	Listen 0.0.0.0:443
 </IfModule>
 
 <IfModule mod_gnutls.c>
-	Listen 443
+	Listen 0.0.0.0:443
 </IfModule>
 
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2020-01-15 02:20:16,166 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/ports.conf] at time 02:20:16.166380 duration_in_ms=162.582
2020-01-15 02:20:16,169 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/conf-available/security.conf] at time 02:20:16.169493
2020-01-15 02:20:16,170 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2020-01-15 02:20:16,203 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2020-01-15 02:20:16,328 [salt.state       :300 ][INFO    ][11481] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2020-01-15 02:20:16,329 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/conf-available/security.conf] at time 02:20:16.329528 duration_in_ms=160.038
2020-01-15 02:20:16,359 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-enabled/keystone.conf] at time 02:20:16.359128
2020-01-15 02:20:16,359 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/sites-enabled/keystone.conf]
2020-01-15 02:20:16,360 [salt.state       :300 ][INFO    ][11481] {'removed': '/etc/apache2/sites-enabled/keystone.conf'}
2020-01-15 02:20:16,361 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-enabled/keystone.conf] at time 02:20:16.361455 duration_in_ms=2.327
2020-01-15 02:20:16,362 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 02:20:16.362110
2020-01-15 02:20:16,362 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/sites-enabled/wsgi-keystone.conf]
2020-01-15 02:20:16,363 [salt.state       :300 ][INFO    ][11481] File /etc/apache2/sites-enabled/wsgi-keystone.conf is not present
2020-01-15 02:20:16,364 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 02:20:16.364162 duration_in_ms=2.052
2020-01-15 02:20:16,367 [salt.state       :1780][INFO    ][11481] Running state [keystone_ssl_mysql] at time 02:20:16.367687
2020-01-15 02:20:16,368 [salt.state       :1813][INFO    ][11481] Executing state test.show_notification for [keystone_ssl_mysql]
2020-01-15 02:20:16,369 [salt.state       :300 ][INFO    ][11481] Running keystone._ssl.mysql
2020-01-15 02:20:16,369 [salt.state       :1951][INFO    ][11481] Completed state [keystone_ssl_mysql] at time 02:20:16.369720 duration_in_ms=2.033
2020-01-15 02:20:16,371 [salt.state       :1780][INFO    ][11481] Running state [keystone_ssl_rabbitmq] at time 02:20:16.371357
2020-01-15 02:20:16,372 [salt.state       :1813][INFO    ][11481] Executing state test.show_notification for [keystone_ssl_rabbitmq]
2020-01-15 02:20:16,372 [salt.state       :300 ][INFO    ][11481] Running keystone._ssl.rabbitmq
2020-01-15 02:20:16,373 [salt.state       :1951][INFO    ][11481] Completed state [keystone_ssl_rabbitmq] at time 02:20:16.373298 duration_in_ms=1.943
2020-01-15 02:20:16,375 [salt.state       :1780][INFO    ][11481] Running state [/etc/keystone/keystone.conf] at time 02:20:16.375392
2020-01-15 02:20:16,376 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/keystone/keystone.conf]
2020-01-15 02:20:16,422 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/files/stein/keystone.conf.Debian'
2020-01-15 02:20:16,699 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_log.conf'
2020-01-15 02:20:16,727 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_default.conf'
2020-01-15 02:20:16,771 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_cache.conf'
2020-01-15 02:20:16,807 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_notifications.conf'
2020-01-15 02:20:16,835 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_rabbit.conf'
2020-01-15 02:20:16,891 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_database.conf'
2020-01-15 02:20:16,946 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_cors.conf'
2020-01-15 02:20:16,982 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_middleware.conf'
2020-01-15 02:20:17,029 [salt.state       :300 ][INFO    ][11481] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-log_dir = /var/log/keystone
 
 #
 # From keystone
@@ -51,6 +51,47 @@
 # this should be set to 32). (integer value)
 #max_token_size = 255
 
+# DEPRECATED: Similar to the `[DEFAULT] member_role_name` option, this
+# represents the default role ID used to associate users with their default
+# projects in the v2 API. This will be used as the explicit role where one is
+# not specified by the v2 API. You do not need to set this value unless you
+# want keystone to use an existing role with a different ID, other than the
+# arbitrarily defined `_member_` role (in which case, you should set `[DEFAULT]
+# member_role_name` as well). (string value)
+# This option is deprecated for removal since Q.
+# Its value may be silently ignored in the future.
+# Reason: This option was used to create a default member role for keystone v2
+# role assignments, but with the removal of the v2 API it is no longer
+# necessary to create this default role. This option is deprecated and will be
+# removed in the S release. If you are depending on having a predictable role
+# name and ID for this member role you will need to update your tooling.
+#member_role_id = 9fe2ff9ee4384b1894a90878d3e92bab
+
+# DEPRECATED: This is the role name used in combination with the `[DEFAULT]
+# member_role_id` option; see that option for more detail. You do not need to
+# set this option unless you want keystone to use an existing role (in which
+# case, you should set `[DEFAULT] member_role_id` as well). (string value)
+# This option is deprecated for removal since Q.
+# Its value may be silently ignored in the future.
+# Reason: This option was used to create a default member role for keystone v2
+# role assignments, but with the removal of the v2 API it is no longer
+# necessary to create this default role. This option is deprecated and will be
+# removed in the S release. If you are depending on having a predictable role
+# name and ID for this member role you will need to update your tooling.
+#member_role_name = _member_
+
+# The value passed as the keyword "rounds" to passlib's encrypt method. This
+# option represents a trade off between security and performance. Higher values
+# lead to slower performance, but higher security. Changing this option will
+# only affect newly created passwords as existing password hashes already have
+# a fixed number of rounds applied, so it is safe to tune this option in a
+# running cluster. For more information, see
+# https://pythonhosted.org/passlib/password_hash_api.html#choosing-the-right-
+# rounds-value (integer value)
+# Minimum value: 1000
+# Maximum value: 100000
+#crypt_strength = 10000
+
 # The maximum number of entities that will be returned in a collection. This
 # global limit may be then overridden for a specific driver, by specifying a
 # list_limit in the appropriate section (for example, `[assignment]`). No limit
@@ -64,6 +105,15 @@
 # fail with an HTTP 403 Forbidden error. If set to false, passwords are
 # automatically truncated to the maximum length. (boolean value)
 #strict_password_check = false
+
+# DEPRECATED: The HTTP header used to determine the scheme for the original
+# request, even if it was removed by an SSL terminating proxy. (string value)
+# This option is deprecated for removal since N.
+# Its value may be silently ignored in the future.
+# Reason: This option has been deprecated in the N release and will be removed
+# in the P release. Use oslo.middleware.http_proxy_to_wsgi configuration
+# instead.
+#secure_proxy_ssl_header = HTTP_X_FORWARDED_PROTO
 
 # If set to true, then the server will return information in HTTP responses
 # that may allow an unauthenticated or authenticated user to get more
@@ -84,7 +134,7 @@
 # Possible values:
 # basic - <No description provided>
 # cadf - <No description provided>
-#notification_format = cadf
+notification_format = basic
 
 # You can reduce the number of notifications keystone emits by explicitly
 # opting out. Keystone will not emit notifications that match the patterns
@@ -98,7 +148,6 @@
 #notification_opt_out = identity.authenticate.success
 #notification_opt_out = identity.authenticate.pending
 #notification_opt_out = identity.authenticate.failed
-
 #
 # From oslo.log
 #
@@ -113,7 +162,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -164,63 +213,27 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when
-# the service was started) is used when scheduling the next rotation. (string
-# value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
 # Additional data to append to log message when logging level for the message
-# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -260,6 +273,151 @@
 
 # The time-to-live in sec of idle connections in the pool (integer value)
 #conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
 
 # Size of executor thread pool when executor is threading or eventlet. (integer
 # value)
@@ -280,42 +438,20 @@
 # oslo_messaging.TransportURL at
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
-#transport_url = rabbit://
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
 #control_exchange = keystone
 
-
-[access_rules_config]
-
-#
-# From keystone
-#
-
-# Entry point for the access rules config backend driver in the
-# `keystone.access_rules_config` namespace.  Keystone only provides a `json`
-# driver, so there is no reason to change this unless you are providing a
-# custom entry point. (string value)
-#driver = json
-
-# Toggle for access rules caching. This has no effect unless global caching is
-# enabled. (boolean value)
-#caching = true
-
-# Time to cache access rule data in seconds. This has no effect unless global
-# caching is enabled. (integer value)
-#cache_time = <None>
-
-# Path to access rules configuration. If not present, no access rule
-# configuration will be loaded and application credential access rules will be
-# unavailable. (string value)
-#rules_file = /etc/keystone/access_rules.json
-
-# Toggles permissive mode for access rules. When enabled, application
-# credentials can be created with any access rules regardless of operator's
-# configuration. (boolean value)
-#permissive = false
 
 
 [application_credential]
@@ -360,6 +496,7 @@
 # A list of role names which are prohibited from being an implied role. (list
 # value)
 #prohibited_implied_role = admin
+driver = sql
 
 
 [auth]
@@ -374,6 +511,8 @@
 # are being invoked to validate attributes in the request environment, it can
 # cause conflicts. (list value)
 #methods = external,password,token,oauth1,mapped,application_credential
+
+methods = password,token
 
 # Entry point for the password auth plugin module in the
 # `keystone.auth.password` namespace. You do not need to set this unless you
@@ -415,88 +554,6 @@
 #application_credential = <None>
 
 
-[cache]
-
-#
-# From oslo.cache
-#
-
-# Prefix for building the configuration dictionary for the cache region. This
-# should not need to be changed unless there is another dogpile.cache region
-# with the same configuration name. (string value)
-#config_prefix = cache.oslo
-
-# Default TTL, in seconds, for any cached item in the dogpile.cache region.
-# This applies to any cached method that doesn't have an explicit cache
-# expiration time defined for it. (integer value)
-#expiration_time = 600
-
-# Cache backend module. For eventlet-based or environments with hundreds of
-# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
-# recommended. For environments with less than 100 threaded servers, Memcached
-# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
-# environments with a single instance of the server can use the
-# dogpile.cache.memory backend. (string value)
-# Possible values:
-# oslo_cache.memcache_pool - <No description provided>
-# oslo_cache.dict - <No description provided>
-# oslo_cache.mongo - <No description provided>
-# oslo_cache.etcd3gw - <No description provided>
-# dogpile.cache.memcached - <No description provided>
-# dogpile.cache.pylibmc - <No description provided>
-# dogpile.cache.bmemcached - <No description provided>
-# dogpile.cache.dbm - <No description provided>
-# dogpile.cache.redis - <No description provided>
-# dogpile.cache.memory - <No description provided>
-# dogpile.cache.memory_pickle - <No description provided>
-# dogpile.cache.null - <No description provided>
-#backend = dogpile.cache.null
-
-# Arguments supplied to the backend module. Specify this option once per
-# argument to be passed to the dogpile.cache backend. Example format:
-# "<argname>:<value>". (multi valued)
-#backend_argument =
-
-# Proxy classes to import that will affect the way the dogpile.cache backend
-# functions. See the dogpile.cache documentation on changing-backend-behavior.
-# (list value)
-#proxies =
-
-# Global toggle for caching. (boolean value)
-#enabled = true
-
-# Extra debugging from the cache backend (cache keys, get/set/delete/etc
-# calls). This is only really useful if you need to see the specific cache-
-# backend get/set/delete calls with the keys/values.  Typically this should be
-# left set to false. (boolean value)
-#debug_cache_backend = false
-
-# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (list value)
-#memcache_servers = localhost:11211
-
-# Number of seconds memcached server is considered dead before it is tried
-# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
-# (integer value)
-#memcache_dead_retry = 300
-
-# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (floating point value)
-#memcache_socket_timeout = 3.0
-
-# Max total number of open connections to every memcached server.
-# (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_maxsize = 10
-
-# Number of seconds a connection to memcached is held unused in the pool before
-# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_unused_timeout = 60
-
-# Number of seconds that an operation will wait to get a memcache client
-# connection. (integer value)
-#memcache_pool_connection_get_timeout = 10
-
-
 [catalog]
 
 #
@@ -505,14 +562,14 @@
 
 # Absolute path to the file used for the templated catalog backend. This option
 # is only used if the `[catalog] driver` is set to `templated`. (string value)
-#template_file = default_catalog.templates
+template_file = default_catalog.templates
 
 # Entry point for the catalog driver in the `keystone.catalog` namespace.
 # Keystone provides a `sql` option (which supports basic CRUD operations
 # through SQL), a `templated` option (which loads the catalog from a templated
 # catalog file on disk), and a `endpoint_filter.sql` option (which supports
 # arbitrary service catalogs per project). (string value)
-#driver = sql
+driver = sql
 
 # Toggle for catalog caching. This has no effect unless global caching is
 # enabled. In a typical deployment, there is no reason to disable this.
@@ -530,35 +587,6 @@
 # deployment to have enough services or endpoints to exceed a reasonable limit.
 # (integer value)
 #list_limit = <None>
-
-
-[cors]
-
-#
-# From oslo.middleware
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,Openstack-Auth-Receipt
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name,Openstack-Auth-Receipt
 
 
 [credential]
@@ -584,123 +612,7 @@
 # of keys should be managed separately and require different rotation policies.
 # Do not share this repository with the repository used to manage keys for
 # Fernet tokens. (string value)
-#key_repository = /etc/keystone/credential-keys/
-
-
-[database]
-connection = sqlite:////var/lib/keystone/keystone.db
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+key_repository = /var/lib/keystone/credential-keys
 
 
 [domain_config]
@@ -772,7 +684,7 @@
 # Reason: Support for running keystone under eventlet has been removed in the
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
-#public_bind_host = 0.0.0.0
+#public_bind_host = 192.168.10.36
 
 # DEPRECATED: The port number for the public service to listen on. (port value)
 # Minimum value: 0
@@ -794,7 +706,7 @@
 # Reason: Support for running keystone under eventlet has been removed in the
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
-#admin_bind_host = 0.0.0.0
+#admin_bind_host = 192.168.10.36
 
 # DEPRECATED: The port number for the admin service to listen on. (port value)
 # Minimum value: 0
@@ -809,7 +721,6 @@
 
 
 [extra_headers]
-Distribution = Ubuntu
 
 #
 # From keystone
@@ -817,7 +728,6 @@
 
 # Specifies the distribution of the keystone server. (string value)
 #Distribution = Ubuntu
-
 
 [federation]
 
@@ -866,43 +776,6 @@
 #caching = true
 
 
-[fernet_receipts]
-
-#
-# From keystone
-#
-
-# Directory containing Fernet receipt keys. This directory must exist before
-# using `keystone-manage fernet_setup` for the first time, must be writable by
-# the user running `keystone-manage fernet_setup` or `keystone-manage
-# fernet_rotate`, and of course must be readable by keystone's server process.
-# The repository may contain keys in one of three states: a single staged key
-# (always index 0) used for receipt validation, a single primary key (always
-# the highest index) used for receipt creation and validation, and any number
-# of secondary keys (all other index values) used for receipt validation. With
-# multiple keystone nodes, each node must share the same key repository
-# contents, with the exception of the staged key (index 0). It is safe to run
-# `keystone-manage fernet_rotate` once on any one node to promote a staged key
-# (index 0) to be the new primary (incremented from the previous highest
-# index), and produce a new staged key (a new key with index 0); the resulting
-# repository can then be atomically replicated to other nodes without any risk
-# of race conditions (for example, it is safe to run `keystone-manage
-# fernet_rotate` on host A, wait any amount of time, create a tarball of the
-# directory on host A, unpack it on host B to a temporary location, and
-# atomically move (`mv`) the directory into place on host B). Running
-# `keystone-manage fernet_rotate` *twice* on a key repository without syncing
-# other nodes will result in receipts that can not be validated by all nodes.
-# (string value)
-#key_repository = /etc/keystone/fernet-keys/
-
-# This controls how many keys are held in rotation by `keystone-manage
-# fernet_rotate` before they are discarded. The default value of 3 means that
-# keystone will maintain one staged key (always index 0), one primary key (the
-# highest numerical index), and one secondary key (every other index).
-# Increasing this value means that additional secondary keys will be kept in
-# the rotation. (integer value)
-# Minimum value: 1
-#max_active_keys = 3
 
 
 [fernet_tokens]
@@ -932,7 +805,7 @@
 # `keystone-manage fernet_rotate` *twice* on a key repository without syncing
 # other nodes will result in tokens that can not be validated by all nodes.
 # (string value)
-#key_repository = /etc/keystone/fernet-keys/
+key_repository = /var/lib/keystone/fernet-keys
 
 # This controls how many keys are held in rotation by `keystone-manage
 # fernet_rotate` before they are discarded. The default value of 3 means that
@@ -941,38 +814,7 @@
 # Increasing this value means that additional secondary keys will be kept in
 # the rotation. (integer value)
 # Minimum value: 1
-#max_active_keys = 3
-
-
-[healthcheck]
-
-#
-# From oslo.middleware
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response. Security note:
-# Enabling this option may expose sensitive details about the service being
-# monitored. Be sure to verify that it will not violate your security policies.
-# (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
+max_active_keys = 51
 
 
 [identity]
@@ -1021,7 +863,7 @@
 # specific configuration is defined for the domain in question. Unless your
 # deployment primarily relies on `ldap` AND is not using domain-specific
 # configuration, you should typically leave this set to `sql`. (string value)
-#driver = sql
+driver = sql
 
 # Toggle for identity caching. This has no effect unless global caching is
 # enabled. There is typically no reason to disable this. (boolean value)
@@ -1118,35 +960,6 @@
 #backward_compatible_ids = true
 
 
-[jwt_tokens]
-
-#
-# From keystone
-#
-
-# Directory containing public keys for validating JWS token signatures. This
-# directory must exist in order for keystone's server process to start. It must
-# also be readable by keystone's server process. It must contain at least one
-# public key that corresponds to a private key in `keystone.conf [jwt_tokens]
-# jws_private_key_repository`. This option is only applicable in deployments
-# issuing JWS tokens and setting `keystone.conf [tokens] provider = jws`.
-# (string value)
-#jws_public_key_repository = /etc/keystone/jws-keys/public
-
-# Directory containing private keys for signing JWS tokens. This directory must
-# exist in order for keystone's server process to start. It must also be
-# readable by keystone's server process. It must contain at least one private
-# key that corresponds to a public key in `keystone.conf [jwt_tokens]
-# jws_public_key_repository`. In the event there are multiple private keys in
-# this directory, keystone will use a key named `private.pem` to sign tokens.
-# In the future, keystone may support the ability to sign tokens with multiple
-# private keys. For now, only a key named `private.pem` within this directory
-# is required to issue JWS tokens. This option is only applicable in
-# deployments issuing JWS tokens and setting `keystone.conf [tokens] provider =
-# jws`. (string value)
-#jws_private_key_repository = /etc/keystone/jws-keys/private
-
-
 [ldap]
 
 #
@@ -1489,454 +1302,6 @@
 #access_token_duration = 86400
 
 
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware
-#
-
-# The maximum body size for each  request, in bytes. (integer value)
-# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
-# Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
-
-# DEPRECATED: The HTTP Header that will be used to determine what the original
-# request protocol scheme was, even if it was hidden by a SSL termination
-# proxy. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
 [policy]
 
 #
@@ -1947,166 +1312,11 @@
 # Supplied drivers are `rules` (which does not support any CRUD operations for
 # the v3 policy API) and `sql`. Typically, there is no reason to set this
 # option unless you are providing a custom entry point. (string value)
-#driver = sql
+driver = sql
 
 # Maximum number of entities that will be returned in a policy collection.
 # (integer value)
 #list_limit = <None>
-
-
-[profiler]
-
-#
-# From osprofiler
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this
-# project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format:
-# <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all
-# services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
-# spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will
-# maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
-
-
-[receipt]
-
-#
-# From keystone
-#
-
-# The amount of time that a receipt should remain valid (in seconds). This
-# value should always be very short, as it represents how long a user has to
-# reattempt auth with the missing auth methods. (integer value)
-# Minimum value: 0
-# Maximum value: 86400
-#expiration = 300
-
-# Entry point for the receipt provider in the `keystone.receipt.provider`
-# namespace. The receipt provider controls the receipt construction and
-# validation operations. Keystone includes just the `fernet` receipt provider
-# for now. `fernet` receipts do not need to be persisted at all, but require
-# that you run `keystone-manage fernet_setup` (also see the `keystone-manage
-# fernet_rotate` command). (string value)
-#provider = fernet
-
-# Toggle for caching receipt creation and validation data. This has no effect
-# unless global caching is enabled, or if cache_on_issue is disabled as we only
-# cache receipts on issue. (boolean value)
-#caching = true
-
-# The number of seconds to cache receipt creation and validation data. This has
-# no effect unless both global and `[receipt] caching` are enabled. (integer
-# value)
-# Minimum value: 0
-#cache_time = 300
-
-# Enable storing issued receipt data to receipt validation cache so that first
-# receipt validation doesn't actually cause full validation cycle. This option
-# has no effect unless global caching and receipt caching are enabled. (boolean
-# value)
-#cache_on_issue = true
 
 
 [resource]
@@ -2371,11 +1581,11 @@
 # This controls the number of previous user password iterations to keep in
 # history, in order to enforce that newly created passwords are unique. The
 # total number which includes the new password should not be greater or equal
-# to this value. Setting the value to zero (the default) disables this feature.
-# Thus, to enable this feature, values must be greater than 0. This feature
+# to this value. Setting the value to one (the default) disables this feature.
+# Thus, to enable this feature, values must be greater than 1. This feature
 # depends on the `sql` backend for the `[identity] driver`. (integer value)
-# Minimum value: 0
-#unique_last_password_count = 0
+# Minimum value: 1
+#unique_last_password_count = 1
 
 # The number of days that a password must be used before the user can change
 # it. This prevents users from changing their passwords immediately in order to
@@ -2411,7 +1621,6 @@
 # value)
 #change_password_upon_first_use = false
 
-
 [shadow_users]
 
 #
@@ -2527,25 +1736,23 @@
 # impact of a compromised token. (integer value)
 # Minimum value: 0
 # Maximum value: 9223372036854775807
-#expiration = 3600
+expiration = 3600
 
 # Entry point for the token provider in the `keystone.token.provider`
 # namespace. The token provider controls the token construction, validation,
-# and revocation operations. Supported upstream providers are `fernet` and
-# `jws`. Neither `fernet` or `jws` tokens require persistence and both require
-# additional setup. If using `fernet`, you're required to run `keystone-manage
-# fernet_setup`, which creates symmetric keys used to encrypt tokens. If using
-# `jws`, you're required to generate an ECDSA keypair using a SHA-256 hash
-# algorithm for signing and validating token, which can be done with `keystone-
-# manage create_jws_keypair`. Note that `fernet` tokens are encrypted and `jws`
-# tokens are only signed. Please be sure to consider this if your deployment
-# has security requirements regarding payload contents used to generate token
-# IDs. (string value)
+# and revocation operations. Keystone includes `fernet` token provider.
+# `fernet` tokens do not need to be persisted at all, but require that you run
+# `keystone-manage fernet_setup` (also see the `keystone-manage fernet_rotate`
+# command). (string value)
 #provider = fernet
+
+provider = fernet
+
 
 # Toggle for caching token creation and validation data. This has no effect
 # unless global caching is enabled. (boolean value)
 #caching = true
+caching = false
 
 # The number of seconds to cache token creation and validation data. This has
 # no effect unless both global and `[token] caching` are enabled. (integer
@@ -2581,24 +1788,19 @@
 # improve the simplicity and readability of policy files.
 #infer_roles = true
 
-# DEPRECATED: Enable storing issued token data to token validation cache so
-# that first token validation doesn't actually cause full validation cycle.
-# This option has no effect unless global caching is enabled and will still
-# cache tokens even if `[token] caching = False`. (boolean value)
-# This option is deprecated for removal since S.
-# Its value may be silently ignored in the future.
-# Reason: Keystone already exposes a configuration option for caching tokens.
-# Having a separate configuration option to cache tokens when they are issued
-# is redundant, unnecessarily complicated, and is misleading if token caching
-# is disabled because tokens will still be pre-cached by default when they are
-# issued. The ability to pre-cache tokens when they are issued is going to rely
-# exclusively on the ``keystone.conf [token] caching`` option in the future.
+# Enable storing issued token data to token validation cache so that first
+# token validation doesn't actually cause full validation cycle. This option
+# has no effect unless global caching and token caching are enabled. (boolean
+# value)
 #cache_on_issue = true
 
 # This controls the number of seconds that a token can be retrieved for beyond
 # the built-in expiry time. This allows long running operations to succeed.
 # Defaults to two days. (integer value)
 #allow_expired_window = 172800
+allow_expired_window = 172800
+
+hash_algorithm = sha256
 
 
 [tokenless_auth]
@@ -2688,7 +1890,420 @@
 # flat - <No description provided>
 # strict_two_level - <No description provided>
 #enforcement_model = flat
-
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Connect over SSL. (boolean value)
+# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
+#ssl = false
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+
+[oslo_policy]
+
+[database]
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://keystone:opnfv_secret@192.168.10.23/keystone?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster (NDB).
+# (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer than this
+# number of seconds will be replaced with a new one the next time they are
+# checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to set the minimum pool size is not supported by
+# sqlalchemy.
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+# Optional URL parameters to append onto the connection URL at connect time;
+# specify as param1=value1&param2=value2&... (string value)
+#connection_parameters =
+
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
+
+[healthcheck]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+max_request_body_size= 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
+
+[profiler]
 
 [wsgi]
 

2020-01-15 02:20:17,033 [salt.state       :1951][INFO    ][11481] Completed state [/etc/keystone/keystone.conf] at time 02:20:17.032885 duration_in_ms=657.493
2020-01-15 02:20:17,035 [salt.state       :1780][INFO    ][11481] Running state [/etc/keystone/keystone-paste.ini] at time 02:20:17.035135
2020-01-15 02:20:17,035 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/keystone/keystone-paste.ini]
2020-01-15 02:20:17,067 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/files/stein/keystone-paste.ini.Debian'
2020-01-15 02:20:17,089 [salt.state       :300 ][INFO    ][11481] File changed:
New file
2020-01-15 02:20:17,090 [salt.state       :1951][INFO    ][11481] Completed state [/etc/keystone/keystone-paste.ini] at time 02:20:17.090357 duration_in_ms=55.223
2020-01-15 02:20:17,091 [salt.state       :1780][INFO    ][11481] Running state [/etc/keystone/policy.json] at time 02:20:17.091760
2020-01-15 02:20:17,092 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/keystone/policy.json]
2020-01-15 02:20:17,093 [salt.loaded.int.states.file:2298][WARNING ][11481] State for file: /etc/keystone/policy.json - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 02:20:17,097 [salt.state       :300 ][INFO    ][11481] {'new': 'file /etc/keystone/policy.json created', 'group': 'keystone', 'mode': '0640'}
2020-01-15 02:20:17,097 [salt.state       :1951][INFO    ][11481] Completed state [/etc/keystone/policy.json] at time 02:20:17.097510 duration_in_ms=5.749
2020-01-15 02:20:17,098 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 02:20:17.098177
2020-01-15 02:20:17,098 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2020-01-15 02:20:17,099 [salt.state       :300 ][INFO    ][11481] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2020-01-15 02:20:17,100 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 02:20:17.100462 duration_in_ms=2.285
2020-01-15 02:20:17,101 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:20:17.101864
2020-01-15 02:20:17,102 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2020-01-15 02:20:17,133 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2020-01-15 02:20:17,188 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2020-01-15 02:20:17,289 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2020-01-15 02:20:17,318 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2020-01-15 02:20:17,460 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2020-01-15 02:20:17,492 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2020-01-15 02:20:17,533 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2020-01-15 02:20:17,576 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_locations.conf'
2020-01-15 02:20:17,618 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'apache/files/_dir.conf'
2020-01-15 02:20:17,638 [salt.state       :300 ][INFO    ][11481] File changed:
New file
2020-01-15 02:20:17,639 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:20:17.639258 duration_in_ms=537.393
2020-01-15 02:20:17,640 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:20:17.640871
2020-01-15 02:20:17,641 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2020-01-15 02:20:18,019 [salt.state       :300 ][INFO    ][11481] File changed:
New file
2020-01-15 02:20:18,020 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:20:18.019933 duration_in_ms=379.062
2020-01-15 02:20:18,020 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:20:18.020751
2020-01-15 02:20:18,021 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2020-01-15 02:20:18,044 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/files/apache.conf'
2020-01-15 02:20:18,119 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/files/stein/wsgi-keystone.conf'
2020-01-15 02:20:18,462 [salt.state       :300 ][INFO    ][11481] File changed:
New file
2020-01-15 02:20:18,463 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:20:18.463092 duration_in_ms=442.34
2020-01-15 02:20:18,464 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:20:18.463993
2020-01-15 02:20:18,464 [salt.state       :1813][INFO    ][11481] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2020-01-15 02:20:18,467 [salt.state       :300 ][INFO    ][11481] {'new': '/etc/apache2/sites-enabled/keystone_wsgi.conf'}
2020-01-15 02:20:18,467 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:20:18.467542 duration_in_ms=3.549
2020-01-15 02:20:18,473 [salt.state       :1780][INFO    ][11481] Running state [apache2] at time 02:20:18.473635
2020-01-15 02:20:18,474 [salt.state       :1813][INFO    ][11481] Executing state service.running for [apache2]
2020-01-15 02:20:18,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2020-01-15 02:20:18,521 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:20:18,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:20:18,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2020-01-15 02:20:18,799 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:20:18,855 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:20:18,899 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:20:18,942 [salt.state       :300 ][INFO    ][11481] {'apache2': True}
2020-01-15 02:20:18,943 [salt.state       :1951][INFO    ][11481] Completed state [apache2] at time 02:20:18.943252 duration_in_ms=469.616
2020-01-15 02:20:18,945 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/conf-enabled/security.conf] at time 02:20:18.945054
2020-01-15 02:20:18,945 [salt.state       :1813][INFO    ][11481] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2020-01-15 02:20:18,948 [salt.state       :300 ][INFO    ][11481] {'new': '/etc/apache2/conf-enabled/security.conf'}
2020-01-15 02:20:18,952 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/conf-enabled/security.conf] at time 02:20:18.952492 duration_in_ms=7.438
2020-01-15 02:20:18,953 [salt.state       :1780][INFO    ][11481] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:20:18.952989
2020-01-15 02:20:18,953 [salt.state       :1813][INFO    ][11481] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2020-01-15 02:20:18,954 [salt.state       :300 ][INFO    ][11481] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2020-01-15 02:20:18,954 [salt.state       :1951][INFO    ][11481] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:20:18.954347 duration_in_ms=1.357
2020-01-15 02:20:18,955 [salt.state       :1780][INFO    ][11481] Running state [keystone-manage db_sync && sleep 1] at time 02:20:18.955395
2020-01-15 02:20:18,959 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [keystone-manage db_sync && sleep 1]
2020-01-15 02:20:18,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command 'keystone-manage db_sync && sleep 1' as user 'keystone' in directory '/var/lib/keystone'
2020-01-15 02:20:21,295 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022021284004
2020-01-15 02:20:21,311 [salt.minion      :1432][INFO    ][16258] Starting a new job with PID 16258
2020-01-15 02:20:21,353 [salt.minion      :1711][INFO    ][16258] Returning information for job: 20200115022021284004
2020-01-15 02:20:32,312 [salt.state       :300 ][INFO    ][11481] {'pid': 16230, 'retcode': 0, 'stderr': '', 'stdout': '2020-01-15 02:20:20.898 16233 INFO migrate.versioning.api [-] 66 -> 67... \x1b[00m\n2020-01-15 02:20:21.583 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.584 16233 INFO migrate.versioning.api [-] 67 -> 68... \x1b[00m\n2020-01-15 02:20:21.594 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.594 16233 INFO migrate.versioning.api [-] 68 -> 69... \x1b[00m\n2020-01-15 02:20:21.603 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.604 16233 INFO migrate.versioning.api [-] 69 -> 70... \x1b[00m\n2020-01-15 02:20:21.614 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.614 16233 INFO migrate.versioning.api [-] 70 -> 71... \x1b[00m\n2020-01-15 02:20:21.625 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.625 16233 INFO migrate.versioning.api [-] 71 -> 72... \x1b[00m\n2020-01-15 02:20:21.636 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.636 16233 INFO migrate.versioning.api [-] 72 -> 73... \x1b[00m\n2020-01-15 02:20:21.695 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.695 16233 INFO migrate.versioning.api [-] 73 -> 74... \x1b[00m\n2020-01-15 02:20:21.741 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.742 16233 INFO migrate.versioning.api [-] 74 -> 75... \x1b[00m\n2020-01-15 02:20:21.770 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.770 16233 INFO migrate.versioning.api [-] 75 -> 76... \x1b[00m\n2020-01-15 02:20:21.783 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.783 16233 INFO migrate.versioning.api [-] 76 -> 77... \x1b[00m\n2020-01-15 02:20:21.795 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.795 16233 INFO migrate.versioning.api [-] 77 -> 78... \x1b[00m\n2020-01-15 02:20:21.808 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.808 16233 INFO migrate.versioning.api [-] 78 -> 79... \x1b[00m\n2020-01-15 02:20:21.817 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.817 16233 INFO migrate.versioning.api [-] 79 -> 80... \x1b[00m\n2020-01-15 02:20:21.826 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.826 16233 INFO migrate.versioning.api [-] 80 -> 81... \x1b[00m\n2020-01-15 02:20:21.854 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.854 16233 INFO migrate.versioning.api [-] 81 -> 82... \x1b[00m\n2020-01-15 02:20:21.966 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:21.966 16233 INFO migrate.versioning.api [-] 82 -> 83... \x1b[00m\n2020-01-15 02:20:22.050 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.050 16233 INFO migrate.versioning.api [-] 83 -> 84... \x1b[00m\n2020-01-15 02:20:22.087 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.087 16233 INFO migrate.versioning.api [-] 84 -> 85... \x1b[00m\n2020-01-15 02:20:22.146 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.147 16233 INFO migrate.versioning.api [-] 85 -> 86... \x1b[00m\n2020-01-15 02:20:22.176 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.176 16233 INFO migrate.versioning.api [-] 86 -> 87... \x1b[00m\n2020-01-15 02:20:22.266 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.266 16233 INFO migrate.versioning.api [-] 87 -> 88... \x1b[00m\n2020-01-15 02:20:22.350 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.350 16233 INFO migrate.versioning.api [-] 88 -> 89... \x1b[00m\n2020-01-15 02:20:22.405 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.405 16233 INFO migrate.versioning.api [-] 89 -> 90... \x1b[00m\n2020-01-15 02:20:22.495 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.495 16233 INFO migrate.versioning.api [-] 90 -> 91... \x1b[00m\n2020-01-15 02:20:22.638 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.638 16233 INFO migrate.versioning.api [-] 91 -> 92... \x1b[00m\n2020-01-15 02:20:22.748 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.748 16233 INFO migrate.versioning.api [-] 92 -> 93... \x1b[00m\n2020-01-15 02:20:22.844 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.844 16233 INFO migrate.versioning.api [-] 93 -> 94... \x1b[00m\n2020-01-15 02:20:22.915 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:22.915 16233 INFO migrate.versioning.api [-] 94 -> 95... \x1b[00m\n2020-01-15 02:20:23.007 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.008 16233 INFO migrate.versioning.api [-] 95 -> 96... \x1b[00m\n2020-01-15 02:20:23.037 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.038 16233 INFO migrate.versioning.api [-] 96 -> 97... \x1b[00m\n2020-01-15 02:20:23.068 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.069 16233 INFO migrate.versioning.api [-] 97 -> 98... \x1b[00m\n2020-01-15 02:20:23.088 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.088 16233 INFO migrate.versioning.api [-] 98 -> 99... \x1b[00m\n2020-01-15 02:20:23.106 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.107 16233 INFO migrate.versioning.api [-] 99 -> 100... \x1b[00m\n2020-01-15 02:20:23.125 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.126 16233 INFO migrate.versioning.api [-] 100 -> 101... \x1b[00m\n2020-01-15 02:20:23.154 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.155 16233 INFO migrate.versioning.api [-] 101 -> 102... \x1b[00m\n2020-01-15 02:20:23.199 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.199 16233 INFO migrate.versioning.api [-] 102 -> 103... \x1b[00m\n2020-01-15 02:20:23.259 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.259 16233 INFO migrate.versioning.api [-] 103 -> 104... \x1b[00m\n2020-01-15 02:20:23.289 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.290 16233 INFO migrate.versioning.api [-] 104 -> 105... \x1b[00m\n2020-01-15 02:20:23.394 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.395 16233 INFO migrate.versioning.api [-] 105 -> 106... \x1b[00m\n2020-01-15 02:20:23.464 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.464 16233 INFO migrate.versioning.api [-] 106 -> 107... \x1b[00m\n2020-01-15 02:20:23.561 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.561 16233 INFO migrate.versioning.api [-] 107 -> 108... \x1b[00m\n2020-01-15 02:20:23.675 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.675 16233 INFO migrate.versioning.api [-] 108 -> 109... \x1b[00m\n2020-01-15 02:20:23.773 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.930 16233 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2020-01-15 02:20:23.952 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.953 16233 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2020-01-15 02:20:23.975 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:23.975 16233 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2020-01-15 02:20:24.122 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.123 16233 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2020-01-15 02:20:24.145 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.145 16233 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2020-01-15 02:20:24.168 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.168 16233 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2020-01-15 02:20:24.190 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.190 16233 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2020-01-15 02:20:24.212 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.213 16233 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2020-01-15 02:20:24.235 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.235 16233 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2020-01-15 02:20:24.257 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.258 16233 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2020-01-15 02:20:24.401 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.401 16233 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2020-01-15 02:20:24.423 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.423 16233 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2020-01-15 02:20:24.547 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.547 16233 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2020-01-15 02:20:24.568 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.569 16233 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2020-01-15 02:20:24.687 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.688 16233 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2020-01-15 02:20:24.709 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.709 16233 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2020-01-15 02:20:24.793 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.794 16233 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2020-01-15 02:20:24.815 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.815 16233 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2020-01-15 02:20:24.837 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.838 16233 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2020-01-15 02:20:24.862 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.862 16233 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2020-01-15 02:20:24.884 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.885 16233 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2020-01-15 02:20:24.907 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.907 16233 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2020-01-15 02:20:24.975 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:24.976 16233 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2020-01-15 02:20:25.063 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.063 16233 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2020-01-15 02:20:25.188 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.189 16233 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2020-01-15 02:20:25.210 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.210 16233 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2020-01-15 02:20:25.230 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.231 16233 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2020-01-15 02:20:25.251 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.252 16233 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2020-01-15 02:20:25.270 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.271 16233 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2020-01-15 02:20:25.285 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.285 16233 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2020-01-15 02:20:25.334 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.334 16233 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2020-01-15 02:20:25.371 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.371 16233 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2020-01-15 02:20:25.435 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.436 16233 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2020-01-15 02:20:25.547 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.547 16233 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2020-01-15 02:20:25.597 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.597 16233 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2020-01-15 02:20:25.632 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.632 16233 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2020-01-15 02:20:25.666 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.666 16233 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2020-01-15 02:20:25.678 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.678 16233 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2020-01-15 02:20:25.691 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.691 16233 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2020-01-15 02:20:25.703 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.703 16233 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2020-01-15 02:20:25.716 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.716 16233 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2020-01-15 02:20:25.728 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.728 16233 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2020-01-15 02:20:25.741 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.741 16233 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2020-01-15 02:20:25.754 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.754 16233 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2020-01-15 02:20:25.769 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.769 16233 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2020-01-15 02:20:25.841 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.841 16233 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2020-01-15 02:20:25.854 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:25.854 16233 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2020-01-15 02:20:26.002 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.002 16233 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2020-01-15 02:20:26.120 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.120 16233 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2020-01-15 02:20:26.131 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.132 16233 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2020-01-15 02:20:26.142 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.142 16233 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2020-01-15 02:20:26.155 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.156 16233 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2020-01-15 02:20:26.168 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.168 16233 INFO migrate.versioning.api [-] 52 -> 53... \x1b[00m\n2020-01-15 02:20:26.203 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.203 16233 INFO migrate.versioning.api [-] 53 -> 54... \x1b[00m\n2020-01-15 02:20:26.215 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.216 16233 INFO migrate.versioning.api [-] 54 -> 55... \x1b[00m\n2020-01-15 02:20:26.269 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.269 16233 INFO migrate.versioning.api [-] 55 -> 56... \x1b[00m\n2020-01-15 02:20:26.327 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.327 16233 INFO migrate.versioning.api [-] 56 -> 57... \x1b[00m\n2020-01-15 02:20:26.340 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.340 16233 INFO migrate.versioning.api [-] 57 -> 58... \x1b[00m\n2020-01-15 02:20:26.354 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.354 16233 INFO migrate.versioning.api [-] 58 -> 59... \x1b[00m\n2020-01-15 02:20:26.367 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.367 16233 INFO migrate.versioning.api [-] 59 -> 60... \x1b[00m\n2020-01-15 02:20:26.382 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.382 16233 INFO migrate.versioning.api [-] 60 -> 61... \x1b[00m\n2020-01-15 02:20:26.398 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.493 16233 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2020-01-15 02:20:26.508 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.508 16233 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2020-01-15 02:20:26.526 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.527 16233 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2020-01-15 02:20:26.564 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.565 16233 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2020-01-15 02:20:26.583 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.583 16233 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2020-01-15 02:20:26.606 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.607 16233 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2020-01-15 02:20:26.626 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.626 16233 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2020-01-15 02:20:26.644 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.645 16233 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2020-01-15 02:20:26.664 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.664 16233 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2020-01-15 02:20:26.683 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.683 16233 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2020-01-15 02:20:26.702 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.703 16233 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2020-01-15 02:20:26.721 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.721 16233 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2020-01-15 02:20:26.794 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.796 16233 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2020-01-15 02:20:26.817 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.818 16233 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2020-01-15 02:20:26.897 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.897 16233 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2020-01-15 02:20:26.966 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.967 16233 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2020-01-15 02:20:26.985 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:26.986 16233 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2020-01-15 02:20:27.010 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.011 16233 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2020-01-15 02:20:27.029 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.030 16233 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2020-01-15 02:20:27.049 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.050 16233 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2020-01-15 02:20:27.068 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.069 16233 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2020-01-15 02:20:27.087 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.087 16233 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2020-01-15 02:20:27.106 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.106 16233 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2020-01-15 02:20:27.125 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.126 16233 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2020-01-15 02:20:27.146 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.146 16233 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2020-01-15 02:20:27.165 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.165 16233 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2020-01-15 02:20:27.184 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.185 16233 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2020-01-15 02:20:27.204 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.204 16233 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2020-01-15 02:20:27.223 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.224 16233 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2020-01-15 02:20:27.243 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.244 16233 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2020-01-15 02:20:27.263 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.263 16233 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2020-01-15 02:20:27.281 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.282 16233 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2020-01-15 02:20:27.301 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.301 16233 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2020-01-15 02:20:27.321 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.321 16233 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2020-01-15 02:20:27.343 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.343 16233 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2020-01-15 02:20:27.364 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.365 16233 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2020-01-15 02:20:27.386 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.387 16233 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2020-01-15 02:20:27.408 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.408 16233 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2020-01-15 02:20:27.430 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.430 16233 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2020-01-15 02:20:27.456 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.456 16233 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2020-01-15 02:20:27.478 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.478 16233 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2020-01-15 02:20:27.500 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.501 16233 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2020-01-15 02:20:27.523 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.523 16233 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2020-01-15 02:20:27.544 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.545 16233 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2020-01-15 02:20:27.565 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.566 16233 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2020-01-15 02:20:27.587 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.587 16233 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2020-01-15 02:20:27.656 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.657 16233 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2020-01-15 02:20:27.681 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.682 16233 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2020-01-15 02:20:27.703 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.704 16233 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2020-01-15 02:20:27.724 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.725 16233 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2020-01-15 02:20:27.745 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.745 16233 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2020-01-15 02:20:27.767 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.767 16233 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2020-01-15 02:20:27.788 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.789 16233 INFO migrate.versioning.api [-] 52 -> 53... \x1b[00m\n2020-01-15 02:20:27.809 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.809 16233 INFO migrate.versioning.api [-] 53 -> 54... \x1b[00m\n2020-01-15 02:20:27.830 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.831 16233 INFO migrate.versioning.api [-] 54 -> 55... \x1b[00m\n2020-01-15 02:20:27.853 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.853 16233 INFO migrate.versioning.api [-] 55 -> 56... \x1b[00m\n2020-01-15 02:20:27.875 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.875 16233 INFO migrate.versioning.api [-] 56 -> 57... \x1b[00m\n2020-01-15 02:20:27.897 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.898 16233 INFO migrate.versioning.api [-] 57 -> 58... \x1b[00m\n2020-01-15 02:20:27.919 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.919 16233 INFO migrate.versioning.api [-] 58 -> 59... \x1b[00m\n2020-01-15 02:20:27.941 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.941 16233 INFO migrate.versioning.api [-] 59 -> 60... \x1b[00m\n2020-01-15 02:20:27.963 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:27.963 16233 INFO migrate.versioning.api [-] 60 -> 61... \x1b[00m\n2020-01-15 02:20:27.984 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.147 16233 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2020-01-15 02:20:28.171 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.171 16233 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2020-01-15 02:20:28.320 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.321 16233 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2020-01-15 02:20:28.459 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.459 16233 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2020-01-15 02:20:28.655 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.655 16233 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2020-01-15 02:20:28.678 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.678 16233 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2020-01-15 02:20:28.703 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.704 16233 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2020-01-15 02:20:28.725 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.725 16233 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2020-01-15 02:20:28.746 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.747 16233 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2020-01-15 02:20:28.789 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.792 16233 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2020-01-15 02:20:28.816 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.817 16233 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2020-01-15 02:20:28.890 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.890 16233 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2020-01-15 02:20:28.967 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:28.967 16233 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2020-01-15 02:20:29.102 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.102 16233 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2020-01-15 02:20:29.356 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.357 16233 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2020-01-15 02:20:29.438 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.439 16233 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2020-01-15 02:20:29.458 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.458 16233 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2020-01-15 02:20:29.478 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.479 16233 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2020-01-15 02:20:29.498 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.499 16233 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2020-01-15 02:20:29.518 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.518 16233 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2020-01-15 02:20:29.538 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.538 16233 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2020-01-15 02:20:29.558 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.558 16233 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2020-01-15 02:20:29.576 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.577 16233 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2020-01-15 02:20:29.596 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.596 16233 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2020-01-15 02:20:29.694 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.694 16233 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2020-01-15 02:20:29.714 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.715 16233 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2020-01-15 02:20:29.733 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.733 16233 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2020-01-15 02:20:29.754 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.754 16233 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2020-01-15 02:20:29.775 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.775 16233 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2020-01-15 02:20:29.795 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.795 16233 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2020-01-15 02:20:29.815 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.816 16233 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2020-01-15 02:20:29.837 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.837 16233 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2020-01-15 02:20:29.903 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.903 16233 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2020-01-15 02:20:29.924 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.925 16233 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2020-01-15 02:20:29.945 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:29.945 16233 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2020-01-15 02:20:30.007 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.007 16233 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2020-01-15 02:20:30.072 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.072 16233 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2020-01-15 02:20:30.170 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.170 16233 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2020-01-15 02:20:30.191 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.191 16233 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2020-01-15 02:20:30.211 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.212 16233 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2020-01-15 02:20:30.232 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.233 16233 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2020-01-15 02:20:30.254 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.254 16233 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2020-01-15 02:20:30.276 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.276 16233 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2020-01-15 02:20:30.296 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.297 16233 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2020-01-15 02:20:30.322 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.322 16233 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2020-01-15 02:20:30.344 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.345 16233 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2020-01-15 02:20:30.365 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.365 16233 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2020-01-15 02:20:30.541 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.542 16233 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2020-01-15 02:20:30.562 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.563 16233 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2020-01-15 02:20:30.582 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.583 16233 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2020-01-15 02:20:30.603 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.604 16233 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2020-01-15 02:20:30.625 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.626 16233 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2020-01-15 02:20:30.647 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.647 16233 INFO migrate.versioning.api [-] 52 -> 53... \x1b[00m\n2020-01-15 02:20:30.668 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.669 16233 INFO migrate.versioning.api [-] 53 -> 54... \x1b[00m\n2020-01-15 02:20:30.753 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.753 16233 INFO migrate.versioning.api [-] 54 -> 55... \x1b[00m\n2020-01-15 02:20:30.811 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.812 16233 INFO migrate.versioning.api [-] 55 -> 56... \x1b[00m\n2020-01-15 02:20:30.832 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.833 16233 INFO migrate.versioning.api [-] 56 -> 57... \x1b[00m\n2020-01-15 02:20:30.854 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.854 16233 INFO migrate.versioning.api [-] 57 -> 58... \x1b[00m\n2020-01-15 02:20:30.876 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.876 16233 INFO migrate.versioning.api [-] 58 -> 59... \x1b[00m\n2020-01-15 02:20:30.898 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.898 16233 INFO migrate.versioning.api [-] 59 -> 60... \x1b[00m\n2020-01-15 02:20:30.920 16233 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:20:30.920 16233 INFO migrate.versioning.api [-] 60 -> 61... \x1b[00m\n2020-01-15 02:20:30.941 16233 INFO migrate.versioning.api [-] done\x1b[00m'}
2020-01-15 02:20:32,315 [salt.state       :1951][INFO    ][11481] Completed state [keystone-manage db_sync && sleep 1] at time 02:20:32.315306 duration_in_ms=13359.908
2020-01-15 02:20:32,320 [salt.state       :1780][INFO    ][11481] Running state [keystone] at time 02:20:32.320380
2020-01-15 02:20:32,321 [salt.state       :1813][INFO    ][11481] Executing state service.dead for [keystone]
2020-01-15 02:20:32,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'status', 'keystone.service', '-n', '0'] in directory '/root'
2020-01-15 02:20:32,379 [salt.state       :300 ][INFO    ][11481] The named service keystone is not available
2020-01-15 02:20:32,381 [salt.state       :1951][INFO    ][11481] Completed state [keystone] at time 02:20:32.381178 duration_in_ms=60.798
2020-01-15 02:20:32,382 [salt.state       :1780][INFO    ][11481] Running state [keystone] at time 02:20:32.382430
2020-01-15 02:20:32,383 [salt.state       :1813][INFO    ][11481] Executing state service.mod_watch for [keystone]
2020-01-15 02:20:32,386 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command ['systemctl', 'is-active', 'keystone.service'] in directory '/root'
2020-01-15 02:20:32,430 [salt.state       :300 ][INFO    ][11481] Service is already stopped
2020-01-15 02:20:32,432 [salt.state       :1951][INFO    ][11481] Completed state [keystone] at time 02:20:32.431871 duration_in_ms=49.44
2020-01-15 02:20:32,436 [salt.state       :1780][INFO    ][11481] Running state [/root/keystonerc] at time 02:20:32.435951
2020-01-15 02:20:32,437 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/root/keystonerc]
2020-01-15 02:20:32,482 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonerc'
2020-01-15 02:20:32,636 [salt.state       :300 ][INFO    ][11481] File changed:
New file
2020-01-15 02:20:32,637 [salt.state       :1951][INFO    ][11481] Completed state [/root/keystonerc] at time 02:20:32.636902 duration_in_ms=200.951
2020-01-15 02:20:32,638 [salt.state       :1780][INFO    ][11481] Running state [/root/keystonercv3] at time 02:20:32.638534
2020-01-15 02:20:32,639 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/root/keystonercv3]
2020-01-15 02:20:32,673 [salt.fileclient  :1219][INFO    ][11481] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonercv3'
2020-01-15 02:20:32,795 [salt.state       :300 ][INFO    ][11481] File changed:
New file
2020-01-15 02:20:32,796 [salt.state       :1951][INFO    ][11481] Completed state [/root/keystonercv3] at time 02:20:32.796558 duration_in_ms=158.023
2020-01-15 02:20:32,798 [salt.state       :1780][INFO    ][11481] Running state [/var/lib/keystone/keystonercv3] at time 02:20:32.798085
2020-01-15 02:20:32,798 [salt.state       :1813][INFO    ][11481] Executing state file.managed for [/var/lib/keystone/keystonercv3]
2020-01-15 02:20:32,940 [salt.state       :300 ][INFO    ][11481] File changed:
New file
2020-01-15 02:20:32,941 [salt.state       :1951][INFO    ][11481] Completed state [/var/lib/keystone/keystonercv3] at time 02:20:32.941506 duration_in_ms=143.42
2020-01-15 02:20:32,943 [salt.state       :1780][INFO    ][11481] Running state [/var/lib/keystone/fernet-keys] at time 02:20:32.943097
2020-01-15 02:20:32,943 [salt.state       :1813][INFO    ][11481] Executing state file.directory for [/var/lib/keystone/fernet-keys]
2020-01-15 02:20:32,950 [salt.state       :300 ][INFO    ][11481] Directory /var/lib/keystone/fernet-keys is in the correct state
Directory /var/lib/keystone/fernet-keys updated
2020-01-15 02:20:32,950 [salt.state       :1951][INFO    ][11481] Completed state [/var/lib/keystone/fernet-keys] at time 02:20:32.950685 duration_in_ms=7.588
2020-01-15 02:20:32,953 [salt.state       :1780][INFO    ][11481] Running state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 02:20:32.953651
2020-01-15 02:20:32,954 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone]
2020-01-15 02:20:32,956 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command 'keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone' as user 'keystone' in directory '/var/lib/keystone'
2020-01-15 02:20:35,205 [salt.state       :300 ][INFO    ][11481] {'pid': 16303, 'retcode': 0, 'stderr': '', 'stdout': "2020-01-15 02:20:34.871 16305 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/fernet-keys/0.tmp\x1b[00m\n2020-01-15 02:20:34.883 16305 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/fernet-keys/0\x1b[00m\n2020-01-15 02:20:34.888 16305 INFO keystone.common.fernet_utils [-] Starting key rotation with 1 key files: ['/var/lib/keystone/fernet-keys/0']\x1b[00m\n2020-01-15 02:20:34.899 16305 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/fernet-keys/0.tmp\x1b[00m\n2020-01-15 02:20:34.899 16305 INFO keystone.common.fernet_utils [-] Current primary key is: 0\x1b[00m\n2020-01-15 02:20:34.900 16305 INFO keystone.common.fernet_utils [-] Next primary key will be: 1\x1b[00m\n2020-01-15 02:20:34.910 16305 INFO keystone.common.fernet_utils [-] Promoted key 0 to be the primary: 1\x1b[00m\n2020-01-15 02:20:34.920 16305 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/fernet-keys/0\x1b[00m\n2020-01-15 02:20:34.920 16305 INFO keystone.common.utils [-] /etc/keystone/fernet-keys/ does not appear to exist; attempting to create it\x1b[00m\n2020-01-15 02:20:34.921 16305 INFO keystone.common.fernet_utils [-] Created a new temporary key: /etc/keystone/fernet-keys/0.tmp\x1b[00m\n2020-01-15 02:20:34.922 16305 INFO keystone.common.fernet_utils [-] Become a valid new key: /etc/keystone/fernet-keys/0\x1b[00m\n2020-01-15 02:20:34.922 16305 INFO keystone.common.fernet_utils [-] Starting key rotation with 1 key files: ['/etc/keystone/fernet-keys/0']\x1b[00m\n2020-01-15 02:20:34.922 16305 INFO keystone.common.fernet_utils [-] Created a new temporary key: /etc/keystone/fernet-keys/0.tmp\x1b[00m\n2020-01-15 02:20:34.923 16305 INFO keystone.common.fernet_utils [-] Current primary key is: 0\x1b[00m\n2020-01-15 02:20:34.923 16305 INFO keystone.common.fernet_utils [-] Next primary key will be: 1\x1b[00m\n2020-01-15 02:20:34.923 16305 INFO keystone.common.fernet_utils [-] Promoted key 0 to be the primary: 1\x1b[00m\n2020-01-15 02:20:34.923 16305 INFO keystone.common.fernet_utils [-] Become a valid new key: /etc/keystone/fernet-keys/0\x1b[00m"}
2020-01-15 02:20:35,207 [salt.state       :1951][INFO    ][11481] Completed state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 02:20:35.207408 duration_in_ms=2253.755
2020-01-15 02:20:35,211 [salt.state       :1780][INFO    ][11481] Running state [/var/lib/keystone/credential-keys] at time 02:20:35.211078
2020-01-15 02:20:35,212 [salt.state       :1813][INFO    ][11481] Executing state file.directory for [/var/lib/keystone/credential-keys]
2020-01-15 02:20:35,222 [salt.state       :300 ][INFO    ][11481] {'mode': '0750'}
2020-01-15 02:20:35,223 [salt.state       :1951][INFO    ][11481] Completed state [/var/lib/keystone/credential-keys] at time 02:20:35.223047 duration_in_ms=11.969
2020-01-15 02:20:35,226 [salt.state       :1780][INFO    ][11481] Running state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 02:20:35.226393
2020-01-15 02:20:35,227 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone]
2020-01-15 02:20:35,229 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command 'keystone-manage credential_setup --keystone-user keystone --keystone-group keystone' as user 'keystone' in directory '/var/lib/keystone'
2020-01-15 02:20:37,263 [salt.state       :300 ][INFO    ][11481] {'pid': 16329, 'retcode': 0, 'stderr': '', 'stdout': "2020-01-15 02:20:37.028 16331 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/credential-keys/0.tmp\x1b[00m\n2020-01-15 02:20:37.039 16331 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/credential-keys/0\x1b[00m\n2020-01-15 02:20:37.043 16331 INFO keystone.common.fernet_utils [-] Starting key rotation with 1 key files: ['/var/lib/keystone/credential-keys/0']\x1b[00m\n2020-01-15 02:20:37.053 16331 INFO keystone.common.fernet_utils [-] Created a new temporary key: /var/lib/keystone/credential-keys/0.tmp\x1b[00m\n2020-01-15 02:20:37.053 16331 INFO keystone.common.fernet_utils [-] Current primary key is: 0\x1b[00m\n2020-01-15 02:20:37.054 16331 INFO keystone.common.fernet_utils [-] Next primary key will be: 1\x1b[00m\n2020-01-15 02:20:37.065 16331 INFO keystone.common.fernet_utils [-] Promoted key 0 to be the primary: 1\x1b[00m\n2020-01-15 02:20:37.077 16331 INFO keystone.common.fernet_utils [-] Become a valid new key: /var/lib/keystone/credential-keys/0\x1b[00m"}
2020-01-15 02:20:37,264 [salt.state       :1951][INFO    ][11481] Completed state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 02:20:37.264727 duration_in_ms=2038.334
2020-01-15 02:20:37,267 [salt.state       :1780][INFO    ][11481] Running state [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.36:5000] at time 02:20:37.266924
2020-01-15 02:20:37,267 [salt.state       :1813][INFO    ][11481] Executing state cmd.run for [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.36:5000]
2020-01-15 02:20:37,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command '. /var/lib/keystone/keystonercv3; openstack endpoint list --service identity --interface internal -f value -c URL  |grep 5000' as user 'keystone' in directory '/var/lib/keystone'
2020-01-15 02:20:39,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11481] Executing command 'keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.36:5000' as user 'keystone' in directory '/var/lib/keystone'
2020-01-15 02:20:42,957 [salt.state       :300 ][INFO    ][11481] {'pid': 16382, 'retcode': 0, 'stderr': '', 'stdout': "2020-01-15 02:20:41.207 16383 WARNING keystone.access_rules_config.backends.json [-] No config file found for access rules, application credential access rules will be unavailable.: FileNotFoundError: [Errno 2] No such file or directory: '/etc/keystone/access_rules.json'\x1b[00m\n2020-01-15 02:20:41.814 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created domain default\x1b[00m\n2020-01-15 02:20:41.874 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created project admin\x1b[00m\n2020-01-15 02:20:42.336 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created user admin\x1b[00m\n2020-01-15 02:20:42.351 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created role reader\x1b[00m\n2020-01-15 02:20:42.364 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created role member\x1b[00m\n2020-01-15 02:20:42.391 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created implied role where a7fb112ab9f14760b0b15f3df15fba9f implies 4f66383bcb0447d59bc67af8a8223dd3\x1b[00m\n2020-01-15 02:20:42.406 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created role admin\x1b[00m\n2020-01-15 02:20:42.434 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created implied role where 6ad844aec6e9401bbfe273bd7e6e8d1f implies a7fb112ab9f14760b0b15f3df15fba9f\x1b[00m\n2020-01-15 02:20:42.459 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Granted admin on admin to user admin.\x1b[00m\n2020-01-15 02:20:42.472 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Granted admin on the system to user admin.\x1b[00m\n2020-01-15 02:20:42.503 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created region RegionOne\x1b[00m\n2020-01-15 02:20:42.580 16383 INFO keystone.cmd.bootstrap [req-591e1e0f-2b42-4be3-b319-56d608467630 - - - - -] Created internal endpoint http://192.168.10.36:5000\x1b[00m"}
2020-01-15 02:20:42,962 [salt.state       :1951][INFO    ][11481] Completed state [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.36:5000] at time 02:20:42.962002 duration_in_ms=5695.07
2020-01-15 02:20:42,982 [salt.minion      :1711][INFO    ][11481] Returning information for job: 20200115021805656032
2020-01-15 02:23:03,768 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command service.restart with jid 20200115022303761939
2020-01-15 02:23:03,807 [salt.minion      :1432][INFO    ][16396] Starting a new job with PID 16396
2020-01-15 02:23:04,245 [keyring.backend  :170 ][INFO    ][16396] Loading Windows (alt)
2020-01-15 02:23:04,259 [keyring.backend  :170 ][INFO    ][16396] Loading pyfs
2020-01-15 02:23:04,261 [keyring.backend  :170 ][INFO    ][16396] Loading multi
2020-01-15 02:23:04,262 [keyring.backend  :170 ][INFO    ][16396] Loading Google
2020-01-15 02:23:04,263 [keyring.backend  :170 ][INFO    ][16396] Loading Gnome
2020-01-15 02:23:04,270 [keyring.backend  :170 ][INFO    ][16396] Loading keyczar
2020-01-15 02:23:04,271 [keyring.backend  :170 ][INFO    ][16396] Loading file
2020-01-15 02:23:05,047 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][16396] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2020-01-15 02:23:05,113 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][16396] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2020-01-15 02:23:05,998 [salt.minion      :1711][INFO    ][16396] Returning information for job: 20200115022303761939
2020-01-15 02:23:08,463 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115022308457260
2020-01-15 02:23:08,478 [salt.minion      :1432][INFO    ][16658] Starting a new job with PID 16658
2020-01-15 02:23:15,517 [salt.state       :915 ][INFO    ][16658] Loading fresh modules for state activity
2020-01-15 02:23:15,637 [salt.fileclient  :1219][INFO    ][16658] Fetching file from saltenv 'base', ** done ** 'keystone/client/init.sls'
2020-01-15 02:23:15,695 [salt.fileclient  :1219][INFO    ][16658] Fetching file from saltenv 'base', ** done ** 'keystone/client/service.sls'
2020-01-15 02:23:15,797 [salt.fileclient  :1219][INFO    ][16658] Fetching file from saltenv 'base', ** done ** 'keystone/client/project.sls'
2020-01-15 02:23:16,130 [salt.fileclient  :1219][INFO    ][16658] Fetching file from saltenv 'base', ** done ** 'keystone/client/server.sls'
2020-01-15 02:23:16,347 [salt.fileclient  :1219][INFO    ][16658] Fetching file from saltenv 'base', ** done ** 'keystone/client/os_client_config.sls'
2020-01-15 02:23:16,429 [salt.fileclient  :1219][INFO    ][16658] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/init.sls'
2020-01-15 02:23:16,455 [salt.fileclient  :1219][INFO    ][16658] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/v3.sls'
2020-01-15 02:23:17,141 [keyring.backend  :170 ][INFO    ][16658] Loading Windows (alt)
2020-01-15 02:23:17,155 [keyring.backend  :170 ][INFO    ][16658] Loading pyfs
2020-01-15 02:23:17,157 [keyring.backend  :170 ][INFO    ][16658] Loading multi
2020-01-15 02:23:17,157 [keyring.backend  :170 ][INFO    ][16658] Loading Google
2020-01-15 02:23:17,159 [keyring.backend  :170 ][INFO    ][16658] Loading Gnome
2020-01-15 02:23:17,164 [keyring.backend  :170 ][INFO    ][16658] Loading keyczar
2020-01-15 02:23:17,165 [keyring.backend  :170 ][INFO    ][16658] Loading file
2020-01-15 02:23:18,096 [salt.state       :1780][INFO    ][16658] Running state [python-keystoneclient] at time 02:23:18.096718
2020-01-15 02:23:18,097 [salt.state       :1813][INFO    ][16658] Executing state pkg.installed for [python-keystoneclient]
2020-01-15 02:23:18,098 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16658] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:23:19,099 [salt.state       :300 ][INFO    ][16658] All specified packages are already installed
2020-01-15 02:23:19,099 [salt.state       :1951][INFO    ][16658] Completed state [python-keystoneclient] at time 02:23:19.099533 duration_in_ms=1002.815
2020-01-15 02:23:19,100 [salt.state       :1780][INFO    ][16658] Running state [python-openstackclient] at time 02:23:19.099992
2020-01-15 02:23:19,100 [salt.state       :1813][INFO    ][16658] Executing state pkg.installed for [python-openstackclient]
2020-01-15 02:23:19,110 [salt.state       :300 ][INFO    ][16658] All specified packages are already installed
2020-01-15 02:23:19,110 [salt.state       :1951][INFO    ][16658] Completed state [python-openstackclient] at time 02:23:19.110275 duration_in_ms=10.283
2020-01-15 02:23:19,110 [salt.state       :1780][INFO    ][16658] Running state [python-os-client-config] at time 02:23:19.110571
2020-01-15 02:23:19,110 [salt.state       :1813][INFO    ][16658] Executing state pkg.installed for [python-os-client-config]
2020-01-15 02:23:19,120 [salt.state       :300 ][INFO    ][16658] All specified packages are already installed
2020-01-15 02:23:19,121 [salt.state       :1951][INFO    ][16658] Completed state [python-os-client-config] at time 02:23:19.121015 duration_in_ms=10.444
2020-01-15 02:23:19,126 [salt.state       :1780][INFO    ][16658] Running state [/root/.config/openstack/clouds.yml] at time 02:23:19.126700
2020-01-15 02:23:19,127 [salt.state       :1813][INFO    ][16658] Executing state file.managed for [/root/.config/openstack/clouds.yml]
2020-01-15 02:23:19,132 [salt.state       :300 ][INFO    ][16658] File changed:
New file
2020-01-15 02:23:19,132 [salt.state       :1951][INFO    ][16658] Completed state [/root/.config/openstack/clouds.yml] at time 02:23:19.132919 duration_in_ms=6.219
2020-01-15 02:23:19,134 [salt.state       :1780][INFO    ][16658] Running state [Member] at time 02:23:19.134701
2020-01-15 02:23:19,135 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.role_present for [Member]
2020-01-15 02:23:20,641 [salt.state       :300 ][INFO    ][16658] roleMember is in desired state
2020-01-15 02:23:20,641 [salt.state       :1951][INFO    ][16658] Completed state [Member] at time 02:23:20.641627 duration_in_ms=1506.923
2020-01-15 02:23:20,642 [salt.state       :1780][INFO    ][16658] Running state [heat_stack_user] at time 02:23:20.642393
2020-01-15 02:23:20,643 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.role_present for [heat_stack_user]
2020-01-15 02:23:22,744 [salt.state       :300 ][INFO    ][16658] {u'role': {u'domain_id': None, u'description': None, u'id': u'7dbadd44648a4ccea08eda69d01f55b7', u'links': {u'self': u'http://192.168.10.36:5000/v3/roles/7dbadd44648a4ccea08eda69d01f55b7'}, u'name': u'heat_stack_user'}}
2020-01-15 02:23:22,746 [salt.state       :1951][INFO    ][16658] Completed state [heat_stack_user] at time 02:23:22.746750 duration_in_ms=2104.355
2020-01-15 02:23:22,748 [salt.state       :1780][INFO    ][16658] Running state [admin] at time 02:23:22.747967
2020-01-15 02:23:22,749 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.role_present for [admin]
2020-01-15 02:23:23,407 [salt.state       :300 ][INFO    ][16658] roleadmin is in desired state
2020-01-15 02:23:23,408 [salt.state       :1951][INFO    ][16658] Completed state [admin] at time 02:23:23.408528 duration_in_ms=660.559
2020-01-15 02:23:23,409 [salt.state       :1780][INFO    ][16658] Running state [creator] at time 02:23:23.409220
2020-01-15 02:23:23,409 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.role_present for [creator]
2020-01-15 02:23:23,544 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022323529479
2020-01-15 02:23:23,578 [salt.minion      :1432][INFO    ][16707] Starting a new job with PID 16707
2020-01-15 02:23:23,627 [salt.minion      :1711][INFO    ][16707] Returning information for job: 20200115022323529479
2020-01-15 02:23:25,228 [salt.state       :300 ][INFO    ][16658] {u'role': {u'domain_id': None, u'description': None, u'id': u'f117038496bb4e46a897b684cf4cb0f6', u'links': {u'self': u'http://192.168.10.36:5000/v3/roles/f117038496bb4e46a897b684cf4cb0f6'}, u'name': u'creator'}}
2020-01-15 02:23:25,230 [salt.state       :1951][INFO    ][16658] Completed state [creator] at time 02:23:25.230470 duration_in_ms=1821.248
2020-01-15 02:23:25,231 [salt.state       :1780][INFO    ][16658] Running state [key-manager:service-admin] at time 02:23:25.231218
2020-01-15 02:23:25,231 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.role_present for [key-manager:service-admin]
2020-01-15 02:23:26,483 [salt.state       :300 ][INFO    ][16658] {u'role': {u'domain_id': None, u'description': None, u'id': u'6777b0dde2b54fba90957ea3d3bc938b', u'links': {u'self': u'http://192.168.10.36:5000/v3/roles/6777b0dde2b54fba90957ea3d3bc938b'}, u'name': u'key-manager:service-admin'}}
2020-01-15 02:23:26,484 [salt.state       :1951][INFO    ][16658] Completed state [key-manager:service-admin] at time 02:23:26.484145 duration_in_ms=1252.924
2020-01-15 02:23:26,485 [salt.state       :1780][INFO    ][16658] Running state [heat_stack_owner] at time 02:23:26.484916
2020-01-15 02:23:26,485 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.role_present for [heat_stack_owner]
2020-01-15 02:23:28,318 [salt.state       :300 ][INFO    ][16658] {u'role': {u'domain_id': None, u'description': None, u'id': u'd222801cfa5f4e209d38c6146f491707', u'links': {u'self': u'http://192.168.10.36:5000/v3/roles/d222801cfa5f4e209d38c6146f491707'}, u'name': u'heat_stack_owner'}}
2020-01-15 02:23:28,319 [salt.state       :1951][INFO    ][16658] Completed state [heat_stack_owner] at time 02:23:28.319288 duration_in_ms=1834.372
2020-01-15 02:23:28,320 [salt.state       :1780][INFO    ][16658] Running state [heat-cfn] at time 02:23:28.319971
2020-01-15 02:23:28,320 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [heat-cfn]
2020-01-15 02:23:29,716 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack CloudFormation Service', u'links': {u'self': u'http://192.168.10.36:5000/v3/services/09fd7d2048514bcc8dc08fbd8c37d4d6'}, u'enabled': True, u'type': u'cloudformation', u'id': u'09fd7d2048514bcc8dc08fbd8c37d4d6', u'name': u'heat-cfn'}}
2020-01-15 02:23:29,717 [salt.state       :1951][INFO    ][16658] Completed state [heat-cfn] at time 02:23:29.717117 duration_in_ms=1397.144
2020-01-15 02:23:29,720 [salt.state       :1780][INFO    ][16658] Running state [heat-cfn_admin_v1] at time 02:23:29.720241
2020-01-15 02:23:29,721 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [heat-cfn_admin_v1]
2020-01-15 02:23:32,439 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/93915d98c5ff4620a28449f0443b8875'}, u'url': u'http://192.168.10.35:8000/v1', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'09fd7d2048514bcc8dc08fbd8c37d4d6', u'id': u'93915d98c5ff4620a28449f0443b8875'}}
2020-01-15 02:23:32,441 [salt.state       :1951][INFO    ][16658] Completed state [heat-cfn_admin_v1] at time 02:23:32.441220 duration_in_ms=2720.979
2020-01-15 02:23:32,443 [salt.state       :1780][INFO    ][16658] Running state [heat-cfn_public_v1] at time 02:23:32.443212
2020-01-15 02:23:32,444 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [heat-cfn_public_v1]
2020-01-15 02:23:35,124 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/5add65ac1ab44f7c9260eca5725f5eb8'}, u'url': u'https://100.64.200.101:8000/v1', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'09fd7d2048514bcc8dc08fbd8c37d4d6', u'id': u'5add65ac1ab44f7c9260eca5725f5eb8'}}
2020-01-15 02:23:35,128 [salt.state       :1951][INFO    ][16658] Completed state [heat-cfn_public_v1] at time 02:23:35.128263 duration_in_ms=2685.05
2020-01-15 02:23:35,131 [salt.state       :1780][INFO    ][16658] Running state [heat-cfn_internal_v1] at time 02:23:35.131134
2020-01-15 02:23:35,132 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [heat-cfn_internal_v1]
2020-01-15 02:23:37,680 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/eecaa572662c4447bd1831cdd8c3c972'}, u'url': u'http://192.168.10.35:8000/v1', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'09fd7d2048514bcc8dc08fbd8c37d4d6', u'id': u'eecaa572662c4447bd1831cdd8c3c972'}}
2020-01-15 02:23:37,680 [salt.state       :1951][INFO    ][16658] Completed state [heat-cfn_internal_v1] at time 02:23:37.680836 duration_in_ms=2549.7
2020-01-15 02:23:37,681 [salt.state       :1780][INFO    ][16658] Running state [ceilometer] at time 02:23:37.681551
2020-01-15 02:23:37,682 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_absent for [ceilometer]
2020-01-15 02:23:38,303 [salt.state       :300 ][INFO    ][16658] service ceilometer not present
2020-01-15 02:23:38,304 [salt.state       :1951][INFO    ][16658] Completed state [ceilometer] at time 02:23:38.304214 duration_in_ms=622.661
2020-01-15 02:23:38,305 [salt.state       :1780][INFO    ][16658] Running state [ceilometer_admin] at time 02:23:38.305005
2020-01-15 02:23:38,305 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_absent for [ceilometer_admin]
2020-01-15 02:23:38,867 [salt.state       :300 ][INFO    ][16658] service ceilometer_admin not present
2020-01-15 02:23:38,868 [salt.state       :1951][INFO    ][16658] Completed state [ceilometer_admin] at time 02:23:38.867980 duration_in_ms=562.975
2020-01-15 02:23:38,868 [salt.state       :1780][INFO    ][16658] Running state [ceilometer_internal] at time 02:23:38.868703
2020-01-15 02:23:38,869 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_absent for [ceilometer_internal]
2020-01-15 02:23:39,697 [salt.state       :300 ][INFO    ][16658] service ceilometer_internal not present
2020-01-15 02:23:39,698 [salt.state       :1951][INFO    ][16658] Completed state [ceilometer_internal] at time 02:23:39.698060 duration_in_ms=829.355
2020-01-15 02:23:39,698 [salt.state       :1780][INFO    ][16658] Running state [ceilometer_public] at time 02:23:39.698721
2020-01-15 02:23:39,699 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_absent for [ceilometer_public]
2020-01-15 02:23:40,341 [salt.state       :300 ][INFO    ][16658] service ceilometer_public not present
2020-01-15 02:23:40,341 [salt.state       :1951][INFO    ][16658] Completed state [ceilometer_public] at time 02:23:40.341735 duration_in_ms=643.011
2020-01-15 02:23:40,342 [salt.state       :1780][INFO    ][16658] Running state [placement] at time 02:23:40.342407
2020-01-15 02:23:40,343 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [placement]
2020-01-15 02:23:41,546 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Placement API', u'links': {u'self': u'http://192.168.10.36:5000/v3/services/31e89d377c7443a7a34162c250ade1b4'}, u'enabled': True, u'type': u'placement', u'id': u'31e89d377c7443a7a34162c250ade1b4', u'name': u'placement'}}
2020-01-15 02:23:41,547 [salt.state       :1951][INFO    ][16658] Completed state [placement] at time 02:23:41.546973 duration_in_ms=1204.564
2020-01-15 02:23:41,549 [salt.state       :1780][INFO    ][16658] Running state [nova_placement_public] at time 02:23:41.549679
2020-01-15 02:23:41,550 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [nova_placement_public]
2020-01-15 02:23:44,170 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/703d1c92b1cb47fc964f502bd36dde92'}, u'url': u'https://100.64.200.101:8778', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'31e89d377c7443a7a34162c250ade1b4', u'id': u'703d1c92b1cb47fc964f502bd36dde92'}}
2020-01-15 02:23:44,173 [salt.state       :1951][INFO    ][16658] Completed state [nova_placement_public] at time 02:23:44.173070 duration_in_ms=2623.39
2020-01-15 02:23:44,175 [salt.state       :1780][INFO    ][16658] Running state [nova_placement_internal] at time 02:23:44.175079
2020-01-15 02:23:44,175 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [nova_placement_internal]
2020-01-15 02:23:46,641 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/6a0f97f50d9a48fda8eca0ed04916f6c'}, u'url': u'http://192.168.10.35:8778', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'31e89d377c7443a7a34162c250ade1b4', u'id': u'6a0f97f50d9a48fda8eca0ed04916f6c'}}
2020-01-15 02:23:46,642 [salt.state       :1951][INFO    ][16658] Completed state [nova_placement_internal] at time 02:23:46.642342 duration_in_ms=2467.31
2020-01-15 02:23:46,644 [salt.state       :1780][INFO    ][16658] Running state [nova_placement_admin] at time 02:23:46.644241
2020-01-15 02:23:46,645 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [nova_placement_admin]
2020-01-15 02:23:49,293 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/c637e11f251c444d89b74639bea9d1f3'}, u'url': u'http://192.168.10.35:8778', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'31e89d377c7443a7a34162c250ade1b4', u'id': u'c637e11f251c444d89b74639bea9d1f3'}}
2020-01-15 02:23:49,294 [salt.state       :1951][INFO    ][16658] Completed state [nova_placement_admin] at time 02:23:49.294469 duration_in_ms=2650.227
2020-01-15 02:23:49,295 [salt.state       :1780][INFO    ][16658] Running state [aodh] at time 02:23:49.295181
2020-01-15 02:23:49,295 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [aodh]
2020-01-15 02:23:50,665 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Alarming Service', u'links': {u'self': u'http://192.168.10.36:5000/v3/services/75b3924663654ef2ae663d94947dbd3f'}, u'enabled': True, u'type': u'alarming', u'id': u'75b3924663654ef2ae663d94947dbd3f', u'name': u'aodh'}}
2020-01-15 02:23:50,667 [salt.state       :1951][INFO    ][16658] Completed state [aodh] at time 02:23:50.667800 duration_in_ms=1372.618
2020-01-15 02:23:50,670 [salt.state       :1780][INFO    ][16658] Running state [aodh_public] at time 02:23:50.670828
2020-01-15 02:23:50,672 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [aodh_public]
2020-01-15 02:23:53,280 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/b58a52749b654af3957bc1fff072e64c'}, u'url': u'https://100.64.200.101:8042/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'75b3924663654ef2ae663d94947dbd3f', u'id': u'b58a52749b654af3957bc1fff072e64c'}}
2020-01-15 02:23:53,281 [salt.state       :1951][INFO    ][16658] Completed state [aodh_public] at time 02:23:53.281121 duration_in_ms=2610.291
2020-01-15 02:23:53,283 [salt.state       :1780][INFO    ][16658] Running state [aodh_internal] at time 02:23:53.282989
2020-01-15 02:23:53,283 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [aodh_internal]
2020-01-15 02:23:53,674 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022353660158
2020-01-15 02:23:53,691 [salt.minion      :1432][INFO    ][16714] Starting a new job with PID 16714
2020-01-15 02:23:53,719 [salt.minion      :1711][INFO    ][16714] Returning information for job: 20200115022353660158
2020-01-15 02:23:55,770 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/9d8ffba227394a308ac0052987602d2c'}, u'url': u'http://192.168.10.31:8042/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'75b3924663654ef2ae663d94947dbd3f', u'id': u'9d8ffba227394a308ac0052987602d2c'}}
2020-01-15 02:23:55,772 [salt.state       :1951][INFO    ][16658] Completed state [aodh_internal] at time 02:23:55.771883 duration_in_ms=2488.892
2020-01-15 02:23:55,774 [salt.state       :1780][INFO    ][16658] Running state [aodh_admin] at time 02:23:55.774165
2020-01-15 02:23:55,775 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [aodh_admin]
2020-01-15 02:23:58,433 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/37e65228af4f4219b44ac19ec94c0bf8'}, u'url': u'http://192.168.10.31:8042/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'75b3924663654ef2ae663d94947dbd3f', u'id': u'37e65228af4f4219b44ac19ec94c0bf8'}}
2020-01-15 02:23:58,433 [salt.state       :1951][INFO    ][16658] Completed state [aodh_admin] at time 02:23:58.433632 duration_in_ms=2659.466
2020-01-15 02:23:58,434 [salt.state       :1780][INFO    ][16658] Running state [nova] at time 02:23:58.434351
2020-01-15 02:23:58,435 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [nova]
2020-01-15 02:23:59,896 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Compute Service V2.1', u'links': {u'self': u'http://192.168.10.36:5000/v3/services/c84c9c6c64324fa28199ce087cd26102'}, u'enabled': True, u'type': u'compute', u'id': u'c84c9c6c64324fa28199ce087cd26102', u'name': u'nova'}}
2020-01-15 02:23:59,897 [salt.state       :1951][INFO    ][16658] Completed state [nova] at time 02:23:59.897596 duration_in_ms=1463.243
2020-01-15 02:23:59,900 [salt.state       :1780][INFO    ][16658] Running state [nova_admin_v2.1] at time 02:23:59.900050
2020-01-15 02:23:59,900 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [nova_admin_v2.1]
2020-01-15 02:24:02,373 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/20183fafe5fa4f0e8dd563df7d443f78'}, u'url': u'http://192.168.10.35:8774/v2.1', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'c84c9c6c64324fa28199ce087cd26102', u'id': u'20183fafe5fa4f0e8dd563df7d443f78'}}
2020-01-15 02:24:02,374 [salt.state       :1951][INFO    ][16658] Completed state [nova_admin_v2.1] at time 02:24:02.374507 duration_in_ms=2474.456
2020-01-15 02:24:02,376 [salt.state       :1780][INFO    ][16658] Running state [nova_public_v2.1] at time 02:24:02.376516
2020-01-15 02:24:02,377 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [nova_public_v2.1]
2020-01-15 02:24:04,905 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/9c67359824ae45ddab7b00434aede820'}, u'url': u'https://100.64.200.101:8774/v2.1', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'c84c9c6c64324fa28199ce087cd26102', u'id': u'9c67359824ae45ddab7b00434aede820'}}
2020-01-15 02:24:04,906 [salt.state       :1951][INFO    ][16658] Completed state [nova_public_v2.1] at time 02:24:04.906230 duration_in_ms=2529.713
2020-01-15 02:24:04,908 [salt.state       :1780][INFO    ][16658] Running state [nova_internal_v2.1] at time 02:24:04.908461
2020-01-15 02:24:04,909 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [nova_internal_v2.1]
2020-01-15 02:24:07,412 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/7dec3c99f26746b7a3f65810114913e5'}, u'url': u'http://192.168.10.35:8774/v2.1', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'c84c9c6c64324fa28199ce087cd26102', u'id': u'7dec3c99f26746b7a3f65810114913e5'}}
2020-01-15 02:24:07,413 [salt.state       :1951][INFO    ][16658] Completed state [nova_internal_v2.1] at time 02:24:07.413234 duration_in_ms=2504.771
2020-01-15 02:24:07,414 [salt.state       :1780][INFO    ][16658] Running state [heat] at time 02:24:07.413918
2020-01-15 02:24:07,414 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [heat]
2020-01-15 02:24:08,681 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Orchestration Service', u'links': {u'self': u'http://192.168.10.36:5000/v3/services/df73ddd3ecca423f816a059d4767bab7'}, u'enabled': True, u'type': u'orchestration', u'id': u'df73ddd3ecca423f816a059d4767bab7', u'name': u'heat'}}
2020-01-15 02:24:08,682 [salt.state       :1951][INFO    ][16658] Completed state [heat] at time 02:24:08.682471 duration_in_ms=1268.552
2020-01-15 02:24:08,685 [salt.state       :1780][INFO    ][16658] Running state [heat_admin_v1] at time 02:24:08.685079
2020-01-15 02:24:08,685 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [heat_admin_v1]
2020-01-15 02:24:11,177 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/c0c404024761492e89ba5914efe9c943'}, u'url': u'http://192.168.10.35:8004/v1/%(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'df73ddd3ecca423f816a059d4767bab7', u'id': u'c0c404024761492e89ba5914efe9c943'}}
2020-01-15 02:24:11,178 [salt.state       :1951][INFO    ][16658] Completed state [heat_admin_v1] at time 02:24:11.178602 duration_in_ms=2493.522
2020-01-15 02:24:11,180 [salt.state       :1780][INFO    ][16658] Running state [heat_public_v1] at time 02:24:11.180666
2020-01-15 02:24:11,181 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [heat_public_v1]
2020-01-15 02:24:13,628 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/a1b49a6cbd5042529fc60e666a54263c'}, u'url': u'https://100.64.200.101:8004/v1/%(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'df73ddd3ecca423f816a059d4767bab7', u'id': u'a1b49a6cbd5042529fc60e666a54263c'}}
2020-01-15 02:24:13,629 [salt.state       :1951][INFO    ][16658] Completed state [heat_public_v1] at time 02:24:13.629066 duration_in_ms=2448.399
2020-01-15 02:24:13,631 [salt.state       :1780][INFO    ][16658] Running state [heat_internal_v1] at time 02:24:13.630973
2020-01-15 02:24:13,631 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [heat_internal_v1]
2020-01-15 02:24:16,167 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/b9d79979f667410f8679b5d78c1ad525'}, u'url': u'http://192.168.10.35:8004/v1/%(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'df73ddd3ecca423f816a059d4767bab7', u'id': u'b9d79979f667410f8679b5d78c1ad525'}}
2020-01-15 02:24:16,168 [salt.state       :1951][INFO    ][16658] Completed state [heat_internal_v1] at time 02:24:16.168007 duration_in_ms=2537.033
2020-01-15 02:24:16,168 [salt.state       :1780][INFO    ][16658] Running state [panko] at time 02:24:16.168870
2020-01-15 02:24:16,169 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [panko]
2020-01-15 02:24:17,389 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Event Service', u'links': {u'self': u'http://192.168.10.36:5000/v3/services/eb19527e802c447186bf4bcd94743675'}, u'enabled': True, u'type': u'event', u'id': u'eb19527e802c447186bf4bcd94743675', u'name': u'panko'}}
2020-01-15 02:24:17,391 [salt.state       :1951][INFO    ][16658] Completed state [panko] at time 02:24:17.391774 duration_in_ms=1222.902
2020-01-15 02:24:17,394 [salt.state       :1780][INFO    ][16658] Running state [panko_admin] at time 02:24:17.394610
2020-01-15 02:24:17,395 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [panko_admin]
2020-01-15 02:24:20,040 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/69ad6a449b9244aa84abe9759f66ed6c'}, u'url': u'http://192.168.10.31:8977/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'eb19527e802c447186bf4bcd94743675', u'id': u'69ad6a449b9244aa84abe9759f66ed6c'}}
2020-01-15 02:24:20,041 [salt.state       :1951][INFO    ][16658] Completed state [panko_admin] at time 02:24:20.041208 duration_in_ms=2646.596
2020-01-15 02:24:20,043 [salt.state       :1780][INFO    ][16658] Running state [panko_internal] at time 02:24:20.043090
2020-01-15 02:24:20,043 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [panko_internal]
2020-01-15 02:24:22,691 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/05f9b225032e44cea9b49230fd3e7039'}, u'url': u'http://192.168.10.31:8977/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'eb19527e802c447186bf4bcd94743675', u'id': u'05f9b225032e44cea9b49230fd3e7039'}}
2020-01-15 02:24:22,692 [salt.state       :1951][INFO    ][16658] Completed state [panko_internal] at time 02:24:22.692422 duration_in_ms=2649.33
2020-01-15 02:24:22,694 [salt.state       :1780][INFO    ][16658] Running state [panko_public] at time 02:24:22.694470
2020-01-15 02:24:22,695 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [panko_public]
2020-01-15 02:24:23,800 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022423784070
2020-01-15 02:24:23,831 [salt.minion      :1432][INFO    ][16720] Starting a new job with PID 16720
2020-01-15 02:24:23,878 [salt.minion      :1711][INFO    ][16720] Returning information for job: 20200115022423784070
2020-01-15 02:24:25,152 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/1ee03d262d004f95ba36bd7925d4753f'}, u'url': u'https://100.64.200.101:8977/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'eb19527e802c447186bf4bcd94743675', u'id': u'1ee03d262d004f95ba36bd7925d4753f'}}
2020-01-15 02:24:25,153 [salt.state       :1951][INFO    ][16658] Completed state [panko_public] at time 02:24:25.153483 duration_in_ms=2459.011
2020-01-15 02:24:25,154 [salt.state       :1780][INFO    ][16658] Running state [keystone] at time 02:24:25.154181
2020-01-15 02:24:25,154 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [keystone]
2020-01-15 02:24:27,009 [salt.state       :300 ][INFO    ][16658] {u'service': {u'name': u'keystone', u'links': {u'self': u'http://192.168.10.36:5000/v3/services/8715f2eb503c4d9dbb7699281724186e'}, u'enabled': True, u'type': u'identity', u'id': u'8715f2eb503c4d9dbb7699281724186e', u'description': u'OpenStack Identity Service'}}
2020-01-15 02:24:27,009 [salt.state       :1951][INFO    ][16658] Completed state [keystone] at time 02:24:27.009653 duration_in_ms=1855.471
2020-01-15 02:24:27,012 [salt.state       :1780][INFO    ][16658] Running state [keystone_public] at time 02:24:27.012175
2020-01-15 02:24:27,013 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [keystone_public]
2020-01-15 02:24:29,656 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/114df28a741f462a93bc75834e61337f'}, u'url': u'https://100.64.200.101:5000/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'8715f2eb503c4d9dbb7699281724186e', u'id': u'114df28a741f462a93bc75834e61337f'}}
2020-01-15 02:24:29,657 [salt.state       :1951][INFO    ][16658] Completed state [keystone_public] at time 02:24:29.657558 duration_in_ms=2645.383
2020-01-15 02:24:29,659 [salt.state       :1780][INFO    ][16658] Running state [keystone_internal] at time 02:24:29.659498
2020-01-15 02:24:29,660 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [keystone_internal]
2020-01-15 02:24:32,194 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.36:5000/v3/endpoints/7479e93a354943869ce8f64c1aa12591'}, u'url': u'http://192.168.10.35:5000/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'8715f2eb503c4d9dbb7699281724186e', u'id': u'7479e93a354943869ce8f64c1aa12591'}}
2020-01-15 02:24:32,195 [salt.state       :1951][INFO    ][16658] Completed state [keystone_internal] at time 02:24:32.195137 duration_in_ms=2535.639
2020-01-15 02:24:32,197 [salt.state       :1780][INFO    ][16658] Running state [keystone_admin] at time 02:24:32.197145
2020-01-15 02:24:32,197 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [keystone_admin]
2020-01-15 02:24:34,485 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/5228f81a2231423f858e6d77a7545f87'}, u'url': u'http://192.168.10.35:5000/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'8715f2eb503c4d9dbb7699281724186e', u'id': u'5228f81a2231423f858e6d77a7545f87'}}
2020-01-15 02:24:34,487 [salt.state       :1951][INFO    ][16658] Completed state [keystone_admin] at time 02:24:34.486958 duration_in_ms=2289.811
2020-01-15 02:24:34,487 [salt.state       :1780][INFO    ][16658] Running state [neutron] at time 02:24:34.487762
2020-01-15 02:24:34,488 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [neutron]
2020-01-15 02:24:35,728 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Networking Service', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/c1633ef5c41a4fadb462c0ffb5fe923a'}, u'enabled': True, u'type': u'network', u'id': u'c1633ef5c41a4fadb462c0ffb5fe923a', u'name': u'neutron'}}
2020-01-15 02:24:35,729 [salt.state       :1951][INFO    ][16658] Completed state [neutron] at time 02:24:35.728915 duration_in_ms=1241.152
2020-01-15 02:24:35,731 [salt.state       :1780][INFO    ][16658] Running state [neutron_public] at time 02:24:35.731456
2020-01-15 02:24:35,732 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [neutron_public]
2020-01-15 02:24:38,112 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/53f366093c4d4e659705f217d89740ce'}, u'url': u'https://100.64.200.101:9696/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'c1633ef5c41a4fadb462c0ffb5fe923a', u'id': u'53f366093c4d4e659705f217d89740ce'}}
2020-01-15 02:24:38,113 [salt.state       :1951][INFO    ][16658] Completed state [neutron_public] at time 02:24:38.113460 duration_in_ms=2382.003
2020-01-15 02:24:38,115 [salt.state       :1780][INFO    ][16658] Running state [neutron_admin] at time 02:24:38.115416
2020-01-15 02:24:38,116 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [neutron_admin]
2020-01-15 02:24:40,487 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/2a7cd6bb7846418b95a6bfd0c9033e9b'}, u'url': u'http://192.168.10.35:9696/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'c1633ef5c41a4fadb462c0ffb5fe923a', u'id': u'2a7cd6bb7846418b95a6bfd0c9033e9b'}}
2020-01-15 02:24:40,488 [salt.state       :1951][INFO    ][16658] Completed state [neutron_admin] at time 02:24:40.488609 duration_in_ms=2373.194
2020-01-15 02:24:40,490 [salt.state       :1780][INFO    ][16658] Running state [neutron_internal] at time 02:24:40.490522
2020-01-15 02:24:40,491 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [neutron_internal]
2020-01-15 02:24:42,861 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/bdbbc2560ac0460abf82932908fd144d'}, u'url': u'http://192.168.10.35:9696/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'c1633ef5c41a4fadb462c0ffb5fe923a', u'id': u'bdbbc2560ac0460abf82932908fd144d'}}
2020-01-15 02:24:42,863 [salt.state       :1951][INFO    ][16658] Completed state [neutron_internal] at time 02:24:42.863086 duration_in_ms=2372.563
2020-01-15 02:24:42,864 [salt.state       :1780][INFO    ][16658] Running state [barbican] at time 02:24:42.864101
2020-01-15 02:24:42,865 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [barbican]
2020-01-15 02:24:44,109 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Key-Manager Service', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/52b3a532865f4a9e8794bbbc9c503a44'}, u'enabled': True, u'type': u'key-manager', u'id': u'52b3a532865f4a9e8794bbbc9c503a44', u'name': u'barbican'}}
2020-01-15 02:24:44,111 [salt.state       :1951][INFO    ][16658] Completed state [barbican] at time 02:24:44.110914 duration_in_ms=1246.811
2020-01-15 02:24:44,114 [salt.state       :1780][INFO    ][16658] Running state [barbican_admin] at time 02:24:44.113923
2020-01-15 02:24:44,115 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [barbican_admin]
2020-01-15 02:24:46,496 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/953fb63a34bb430fbded6c0771d0c5b5'}, u'url': u'http://192.168.10.35:9311/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'52b3a532865f4a9e8794bbbc9c503a44', u'id': u'953fb63a34bb430fbded6c0771d0c5b5'}}
2020-01-15 02:24:46,498 [salt.state       :1951][INFO    ][16658] Completed state [barbican_admin] at time 02:24:46.498153 duration_in_ms=2384.227
2020-01-15 02:24:46,500 [salt.state       :1780][INFO    ][16658] Running state [barbican_public] at time 02:24:46.500265
2020-01-15 02:24:46,501 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [barbican_public]
2020-01-15 02:24:48,881 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/2702cdc2470d4cecb148a856d72d09f8'}, u'url': u'https://100.64.200.101:9311/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'52b3a532865f4a9e8794bbbc9c503a44', u'id': u'2702cdc2470d4cecb148a856d72d09f8'}}
2020-01-15 02:24:48,881 [salt.state       :1951][INFO    ][16658] Completed state [barbican_public] at time 02:24:48.881718 duration_in_ms=2381.452
2020-01-15 02:24:48,883 [salt.state       :1780][INFO    ][16658] Running state [barbican_internal] at time 02:24:48.883723
2020-01-15 02:24:48,884 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [barbican_internal]
2020-01-15 02:24:51,144 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/add38b3ce0774a7dbff6661eb2b19165'}, u'url': u'http://192.168.10.35:9311/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'52b3a532865f4a9e8794bbbc9c503a44', u'id': u'add38b3ce0774a7dbff6661eb2b19165'}}
2020-01-15 02:24:51,145 [salt.state       :1951][INFO    ][16658] Completed state [barbican_internal] at time 02:24:51.145026 duration_in_ms=2261.301
2020-01-15 02:24:51,145 [salt.state       :1780][INFO    ][16658] Running state [cinder] at time 02:24:51.145775
2020-01-15 02:24:51,146 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [cinder]
2020-01-15 02:24:52,361 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Volume Service', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/b3ffe84cdfb54822994ed95a54e580f0'}, u'enabled': True, u'type': u'volume', u'id': u'b3ffe84cdfb54822994ed95a54e580f0', u'name': u'cinder'}}
2020-01-15 02:24:52,362 [salt.state       :1951][INFO    ][16658] Completed state [cinder] at time 02:24:52.362629 duration_in_ms=1216.853
2020-01-15 02:24:52,363 [salt.state       :1780][INFO    ][16658] Running state [cinderv3] at time 02:24:52.363385
2020-01-15 02:24:52,364 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [cinderv3]
2020-01-15 02:24:53,492 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Volume Service V3', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/240e6030765b4f909970d11974208747'}, u'enabled': True, u'type': u'volumev3', u'id': u'240e6030765b4f909970d11974208747', u'name': u'cinderv3'}}
2020-01-15 02:24:53,493 [salt.state       :1951][INFO    ][16658] Completed state [cinderv3] at time 02:24:53.493365 duration_in_ms=1129.979
2020-01-15 02:24:53,496 [salt.state       :1780][INFO    ][16658] Running state [cinder_public_v3] at time 02:24:53.496151
2020-01-15 02:24:53,496 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [cinder_public_v3]
2020-01-15 02:24:53,926 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022453910226
2020-01-15 02:24:53,959 [salt.minion      :1432][INFO    ][16727] Starting a new job with PID 16727
2020-01-15 02:24:54,018 [salt.minion      :1711][INFO    ][16727] Returning information for job: 20200115022453910226
2020-01-15 02:24:56,000 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/2c634382f3c14e1ebb4d6e26e22f3a92'}, u'url': u'https://100.64.200.101:8776/v3/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'240e6030765b4f909970d11974208747', u'id': u'2c634382f3c14e1ebb4d6e26e22f3a92'}}
2020-01-15 02:24:56,001 [salt.state       :1951][INFO    ][16658] Completed state [cinder_public_v3] at time 02:24:56.001564 duration_in_ms=2505.412
2020-01-15 02:24:56,003 [salt.state       :1780][INFO    ][16658] Running state [cinder_admin_v3] at time 02:24:56.003482
2020-01-15 02:24:56,004 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [cinder_admin_v3]
2020-01-15 02:24:58,378 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/03e9827e7b0744ea91399b66f23c6e7e'}, u'url': u'http://192.168.10.35:8776/v3/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'240e6030765b4f909970d11974208747', u'id': u'03e9827e7b0744ea91399b66f23c6e7e'}}
2020-01-15 02:24:58,379 [salt.state       :1951][INFO    ][16658] Completed state [cinder_admin_v3] at time 02:24:58.379477 duration_in_ms=2375.994
2020-01-15 02:24:58,381 [salt.state       :1780][INFO    ][16658] Running state [cinder_internal_v3] at time 02:24:58.381599
2020-01-15 02:24:58,382 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [cinder_internal_v3]
2020-01-15 02:25:00,746 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/2056bfc4335d4dc781ca2a3ee589b318'}, u'url': u'http://192.168.10.35:8776/v3/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'240e6030765b4f909970d11974208747', u'id': u'2056bfc4335d4dc781ca2a3ee589b318'}}
2020-01-15 02:25:00,746 [salt.state       :1951][INFO    ][16658] Completed state [cinder_internal_v3] at time 02:25:00.746743 duration_in_ms=2365.141
2020-01-15 02:25:00,747 [salt.state       :1780][INFO    ][16658] Running state [cinderv2] at time 02:25:00.747407
2020-01-15 02:25:00,748 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [cinderv2]
2020-01-15 02:25:01,985 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Volume Service V2', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/2a73d90220854750a60b3b0788ed3540'}, u'enabled': True, u'type': u'volumev2', u'id': u'2a73d90220854750a60b3b0788ed3540', u'name': u'cinderv2'}}
2020-01-15 02:25:01,985 [salt.state       :1951][INFO    ][16658] Completed state [cinderv2] at time 02:25:01.985695 duration_in_ms=1238.287
2020-01-15 02:25:01,988 [salt.state       :1780][INFO    ][16658] Running state [cinder_public_v2] at time 02:25:01.988391
2020-01-15 02:25:01,989 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [cinder_public_v2]
2020-01-15 02:25:04,370 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/daf91517b7e9442b812831c6675236da'}, u'url': u'https://100.64.200.101:8776/v2/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'2a73d90220854750a60b3b0788ed3540', u'id': u'daf91517b7e9442b812831c6675236da'}}
2020-01-15 02:25:04,370 [salt.state       :1951][INFO    ][16658] Completed state [cinder_public_v2] at time 02:25:04.370689 duration_in_ms=2382.296
2020-01-15 02:25:04,372 [salt.state       :1780][INFO    ][16658] Running state [cinder_admin_v2] at time 02:25:04.372720
2020-01-15 02:25:04,373 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [cinder_admin_v2]
2020-01-15 02:25:06,852 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/1f2144b6c45f4092a13e44cc980678b3'}, u'url': u'http://192.168.10.35:8776/v2/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'2a73d90220854750a60b3b0788ed3540', u'id': u'1f2144b6c45f4092a13e44cc980678b3'}}
2020-01-15 02:25:06,852 [salt.state       :1951][INFO    ][16658] Completed state [cinder_admin_v2] at time 02:25:06.852798 duration_in_ms=2480.078
2020-01-15 02:25:06,854 [salt.state       :1780][INFO    ][16658] Running state [cinder_internal_v2] at time 02:25:06.854747
2020-01-15 02:25:06,855 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [cinder_internal_v2]
2020-01-15 02:25:09,243 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/bed5ad65607c479c9b42eb2a0aca6009'}, u'url': u'http://192.168.10.35:8776/v2/$(project_id)s', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'2a73d90220854750a60b3b0788ed3540', u'id': u'bed5ad65607c479c9b42eb2a0aca6009'}}
2020-01-15 02:25:09,244 [salt.state       :1951][INFO    ][16658] Completed state [cinder_internal_v2] at time 02:25:09.243851 duration_in_ms=2389.103
2020-01-15 02:25:09,244 [salt.state       :1780][INFO    ][16658] Running state [glance] at time 02:25:09.244637
2020-01-15 02:25:09,245 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [glance]
2020-01-15 02:25:10,479 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Image Service', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/202ad9df9cc64c82be589aef2d131723'}, u'enabled': True, u'type': u'image', u'id': u'202ad9df9cc64c82be589aef2d131723', u'name': u'glance'}}
2020-01-15 02:25:10,480 [salt.state       :1951][INFO    ][16658] Completed state [glance] at time 02:25:10.479935 duration_in_ms=1235.296
2020-01-15 02:25:10,482 [salt.state       :1780][INFO    ][16658] Running state [glance_public] at time 02:25:10.482612
2020-01-15 02:25:10,483 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [glance_public]
2020-01-15 02:25:12,851 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/901527d117394c10a74e1b9ceca18d9d'}, u'url': u'https://100.64.200.101:9292', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'202ad9df9cc64c82be589aef2d131723', u'id': u'901527d117394c10a74e1b9ceca18d9d'}}
2020-01-15 02:25:12,851 [salt.state       :1951][INFO    ][16658] Completed state [glance_public] at time 02:25:12.851604 duration_in_ms=2368.992
2020-01-15 02:25:12,853 [salt.state       :1780][INFO    ][16658] Running state [glance_internal] at time 02:25:12.853713
2020-01-15 02:25:12,854 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [glance_internal]
2020-01-15 02:25:15,102 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/0679c4629f4a42eaa1c4bc49f8e6abaf'}, u'url': u'http://192.168.10.35:9292', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'202ad9df9cc64c82be589aef2d131723', u'id': u'0679c4629f4a42eaa1c4bc49f8e6abaf'}}
2020-01-15 02:25:15,102 [salt.state       :1951][INFO    ][16658] Completed state [glance_internal] at time 02:25:15.102855 duration_in_ms=2249.14
2020-01-15 02:25:15,105 [salt.state       :1780][INFO    ][16658] Running state [glance_admin] at time 02:25:15.104916
2020-01-15 02:25:15,105 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [glance_admin]
2020-01-15 02:25:17,493 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/11a3cc454d1c4794b123c2e7392b4336'}, u'url': u'http://192.168.10.35:9292', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'202ad9df9cc64c82be589aef2d131723', u'id': u'11a3cc454d1c4794b123c2e7392b4336'}}
2020-01-15 02:25:17,494 [salt.state       :1951][INFO    ][16658] Completed state [glance_admin] at time 02:25:17.494380 duration_in_ms=2389.463
2020-01-15 02:25:17,495 [salt.state       :1780][INFO    ][16658] Running state [gnocchi] at time 02:25:17.495089
2020-01-15 02:25:17,495 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [gnocchi]
2020-01-15 02:25:18,742 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack Metric Service', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/bc478ab7db8149918b64eee1e0bf5ccb'}, u'enabled': True, u'type': u'metric', u'id': u'bc478ab7db8149918b64eee1e0bf5ccb', u'name': u'gnocchi'}}
2020-01-15 02:25:18,743 [salt.state       :1951][INFO    ][16658] Completed state [gnocchi] at time 02:25:18.743564 duration_in_ms=1248.474
2020-01-15 02:25:18,746 [salt.state       :1780][INFO    ][16658] Running state [gnocchi_public] at time 02:25:18.746241
2020-01-15 02:25:18,747 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [gnocchi_public]
2020-01-15 02:25:21,203 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/ff12d4ad44ce4a60a6152ae786eff7b3'}, u'url': u'https://100.64.200.101:8041/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'bc478ab7db8149918b64eee1e0bf5ccb', u'id': u'ff12d4ad44ce4a60a6152ae786eff7b3'}}
2020-01-15 02:25:21,204 [salt.state       :1951][INFO    ][16658] Completed state [gnocchi_public] at time 02:25:21.203917 duration_in_ms=2457.675
2020-01-15 02:25:21,206 [salt.state       :1780][INFO    ][16658] Running state [gnocchi_admin] at time 02:25:21.205941
2020-01-15 02:25:21,206 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [gnocchi_admin]
2020-01-15 02:25:23,491 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/0849a1c39fbf401092c8e4ebf5dbc23b'}, u'url': u'http://192.168.10.31:8041/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'bc478ab7db8149918b64eee1e0bf5ccb', u'id': u'0849a1c39fbf401092c8e4ebf5dbc23b'}}
2020-01-15 02:25:23,492 [salt.state       :1951][INFO    ][16658] Completed state [gnocchi_admin] at time 02:25:23.492571 duration_in_ms=2286.628
2020-01-15 02:25:23,494 [salt.state       :1780][INFO    ][16658] Running state [gnocchi_internal] at time 02:25:23.494520
2020-01-15 02:25:23,495 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [gnocchi_internal]
2020-01-15 02:25:24,071 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022524059529
2020-01-15 02:25:24,104 [salt.minion      :1432][INFO    ][16732] Starting a new job with PID 16732
2020-01-15 02:25:24,156 [salt.minion      :1711][INFO    ][16732] Returning information for job: 20200115022524059529
2020-01-15 02:25:25,865 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/c5f7af064a6c4273bc27e1a91d347fd3'}, u'url': u'http://192.168.10.31:8041/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'bc478ab7db8149918b64eee1e0bf5ccb', u'id': u'c5f7af064a6c4273bc27e1a91d347fd3'}}
2020-01-15 02:25:25,868 [salt.state       :1951][INFO    ][16658] Completed state [gnocchi_internal] at time 02:25:25.867906 duration_in_ms=2373.384
2020-01-15 02:25:25,869 [salt.state       :1780][INFO    ][16658] Running state [designate] at time 02:25:25.868949
2020-01-15 02:25:25,869 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.service_present for [designate]
2020-01-15 02:25:27,140 [salt.state       :300 ][INFO    ][16658] {u'service': {u'description': u'OpenStack DNS service', u'links': {u'self': u'http://192.168.10.35:5000/v3/services/7ba300957e424651b94a230c387683bd'}, u'enabled': True, u'type': u'dns', u'id': u'7ba300957e424651b94a230c387683bd', u'name': u'designate'}}
2020-01-15 02:25:27,140 [salt.state       :1951][INFO    ][16658] Completed state [designate] at time 02:25:27.140470 duration_in_ms=1271.521
2020-01-15 02:25:27,141 [salt.state       :1780][INFO    ][16658] Running state [designate_internal] at time 02:25:27.141664
2020-01-15 02:25:27,141 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [designate_internal]
2020-01-15 02:25:29,519 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/cb91a2971a46450787de17c5a5908fa7'}, u'url': u'http://192.168.10.35:9001/', u'region': u'RegionOne', u'enabled': True, u'interface': u'internal', u'service_id': u'7ba300957e424651b94a230c387683bd', u'id': u'cb91a2971a46450787de17c5a5908fa7'}}
2020-01-15 02:25:29,520 [salt.state       :1951][INFO    ][16658] Completed state [designate_internal] at time 02:25:29.520148 duration_in_ms=2378.482
2020-01-15 02:25:29,522 [salt.state       :1780][INFO    ][16658] Running state [designate_admin] at time 02:25:29.522330
2020-01-15 02:25:29,523 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [designate_admin]
2020-01-15 02:25:31,862 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/c4c7a61fe1c4494b8637a3eb3da71430'}, u'url': u'http://192.168.10.35:9001/', u'region': u'RegionOne', u'enabled': True, u'interface': u'admin', u'service_id': u'7ba300957e424651b94a230c387683bd', u'id': u'c4c7a61fe1c4494b8637a3eb3da71430'}}
2020-01-15 02:25:31,863 [salt.state       :1951][INFO    ][16658] Completed state [designate_admin] at time 02:25:31.863656 duration_in_ms=2341.324
2020-01-15 02:25:31,865 [salt.state       :1780][INFO    ][16658] Running state [designate_public] at time 02:25:31.865793
2020-01-15 02:25:31,866 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.endpoint_present for [designate_public]
2020-01-15 02:25:34,243 [salt.state       :300 ][INFO    ][16658] {u'endpoint': {u'region_id': u'RegionOne', u'links': {u'self': u'http://192.168.10.35:5000/v3/endpoints/4df06e7489c943c8807162758906c295'}, u'url': u'https://100.64.200.101:9001/', u'region': u'RegionOne', u'enabled': True, u'interface': u'public', u'service_id': u'7ba300957e424651b94a230c387683bd', u'id': u'4df06e7489c943c8807162758906c295'}}
2020-01-15 02:25:34,244 [salt.state       :1951][INFO    ][16658] Completed state [designate_public] at time 02:25:34.243823 duration_in_ms=2378.028
2020-01-15 02:25:34,244 [salt.state       :1780][INFO    ][16658] Running state [Default] at time 02:25:34.244692
2020-01-15 02:25:34,245 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.domain_present for [Default]
2020-01-15 02:25:34,881 [salt.state       :300 ][INFO    ][16658] domainDefault is in desired state
2020-01-15 02:25:34,881 [salt.state       :1951][INFO    ][16658] Completed state [Default] at time 02:25:34.881691 duration_in_ms=636.999
2020-01-15 02:25:34,882 [salt.state       :1780][INFO    ][16658] Running state [admin] at time 02:25:34.882518
2020-01-15 02:25:34,883 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.project_present for [admin]
2020-01-15 02:25:36,153 [salt.state       :300 ][INFO    ][16658] {u'project': {u'is_domain': False, u'description': u'OpenStack Admin tenant', u'links': {u'self': u'http://192.168.10.35:5000/v3/projects/9f56977a6513427791959987063c1be9'}, u'tags': [], u'extra': {}, u'enabled': True, u'id': u'9f56977a6513427791959987063c1be9', u'parent_id': u'default', u'domain_id': u'default', u'name': u'admin'}}
2020-01-15 02:25:36,153 [salt.state       :1951][INFO    ][16658] Completed state [admin] at time 02:25:36.153821 duration_in_ms=1271.303
2020-01-15 02:25:36,154 [salt.state       :1780][INFO    ][16658] Running state [service] at time 02:25:36.154499
2020-01-15 02:25:36,155 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.project_present for [service]
2020-01-15 02:25:37,403 [salt.state       :300 ][INFO    ][16658] {u'project': {u'is_domain': False, u'description': u'OpenStack Service tenant', u'links': {u'self': u'http://192.168.10.35:5000/v3/projects/a89b3a199c904fa88307ed3dbb3e4b63'}, u'tags': [], u'enabled': True, u'id': u'a89b3a199c904fa88307ed3dbb3e4b63', u'parent_id': u'default', u'domain_id': u'default', u'name': u'service'}}
2020-01-15 02:25:37,403 [salt.state       :1951][INFO    ][16658] Completed state [service] at time 02:25:37.403756 duration_in_ms=1249.256
2020-01-15 02:25:37,404 [salt.state       :1780][INFO    ][16658] Running state [ceilometer] at time 02:25:37.404601
2020-01-15 02:25:37,405 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [ceilometer]
2020-01-15 02:25:39,173 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/cec11a5cd2ff42a0b435554086e0f020'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'cec11a5cd2ff42a0b435554086e0f020', u'domain_id': u'default', u'name': u'ceilometer'}}
2020-01-15 02:25:39,174 [salt.state       :1951][INFO    ][16658] Completed state [ceilometer] at time 02:25:39.174279 duration_in_ms=1769.679
2020-01-15 02:25:39,176 [salt.state       :1780][INFO    ][16658] Running state [ceilometer] at time 02:25:39.175993
2020-01-15 02:25:39,176 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [ceilometer]
2020-01-15 02:25:43,894 [salt.state       :300 ][INFO    ][16658] user_role_assignmentceilometer created
2020-01-15 02:25:43,895 [salt.state       :1951][INFO    ][16658] Completed state [ceilometer] at time 02:25:43.895399 duration_in_ms=4719.404
2020-01-15 02:25:43,896 [salt.state       :1780][INFO    ][16658] Running state [admin] at time 02:25:43.896127
2020-01-15 02:25:43,897 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [admin]
2020-01-15 02:25:44,664 [salt.loaded.ext.states.keystonev3:283 ][INFO    ][16658] Updating keystone user 01cf54a956ec44fa8ac205211cbfc66b with: {'email': 'root@localhost', 'options': {'ignore_change_password_upon_first_use': True, 'ignore_password_expiry': True, 'lock_password': False, 'ignore_lockout_failure_attempts': False}}
2020-01-15 02:25:45,688 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/01cf54a956ec44fa8ac205211cbfc66b'}, u'extra': {u'email': u'root@localhost'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'01cf54a956ec44fa8ac205211cbfc66b', u'domain_id': u'default', u'name': u'admin'}}
2020-01-15 02:25:45,689 [salt.state       :1951][INFO    ][16658] Completed state [admin] at time 02:25:45.689355 duration_in_ms=1793.226
2020-01-15 02:25:45,692 [salt.state       :1780][INFO    ][16658] Running state [admin] at time 02:25:45.691929
2020-01-15 02:25:45,692 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [admin]
2020-01-15 02:25:49,999 [salt.state       :300 ][INFO    ][16658] user_role_assignmentadmin is in desired state
2020-01-15 02:25:50,000 [salt.state       :1951][INFO    ][16658] Completed state [admin] at time 02:25:50.000643 duration_in_ms=4308.713
2020-01-15 02:25:50,001 [salt.state       :1780][INFO    ][16658] Running state [aodh] at time 02:25:50.001326
2020-01-15 02:25:50,002 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [aodh]
2020-01-15 02:25:51,675 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/d7962f86741d4de3a33406e1318ed4f2'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'd7962f86741d4de3a33406e1318ed4f2', u'domain_id': u'default', u'name': u'aodh'}}
2020-01-15 02:25:51,676 [salt.state       :1951][INFO    ][16658] Completed state [aodh] at time 02:25:51.676731 duration_in_ms=1675.404
2020-01-15 02:25:51,679 [salt.state       :1780][INFO    ][16658] Running state [aodh] at time 02:25:51.679281
2020-01-15 02:25:51,680 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [aodh]
2020-01-15 02:25:54,204 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022554187703
2020-01-15 02:25:54,236 [salt.minion      :1432][INFO    ][16737] Starting a new job with PID 16737
2020-01-15 02:25:54,283 [salt.minion      :1711][INFO    ][16737] Returning information for job: 20200115022554187703
2020-01-15 02:25:56,517 [salt.state       :300 ][INFO    ][16658] user_role_assignmentaodh created
2020-01-15 02:25:56,520 [salt.state       :1951][INFO    ][16658] Completed state [aodh] at time 02:25:56.520154 duration_in_ms=4840.872
2020-01-15 02:25:56,521 [salt.state       :1780][INFO    ][16658] Running state [nova] at time 02:25:56.521108
2020-01-15 02:25:56,521 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [nova]
2020-01-15 02:25:58,286 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/c2ed53b051ef439dbd6a9f3c3b91f8b1'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'c2ed53b051ef439dbd6a9f3c3b91f8b1', u'domain_id': u'default', u'name': u'nova'}}
2020-01-15 02:25:58,287 [salt.state       :1951][INFO    ][16658] Completed state [nova] at time 02:25:58.287270 duration_in_ms=1766.163
2020-01-15 02:25:58,288 [salt.state       :1780][INFO    ][16658] Running state [nova] at time 02:25:58.288492
2020-01-15 02:25:58,288 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [nova]
2020-01-15 02:26:03,136 [salt.state       :300 ][INFO    ][16658] user_role_assignmentnova created
2020-01-15 02:26:03,136 [salt.state       :1951][INFO    ][16658] Completed state [nova] at time 02:26:03.136725 duration_in_ms=4848.231
2020-01-15 02:26:03,137 [salt.state       :1780][INFO    ][16658] Running state [heat] at time 02:26:03.137396
2020-01-15 02:26:03,138 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [heat]
2020-01-15 02:26:04,845 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/707e949437c44ebd89fce146030ab4d7'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'707e949437c44ebd89fce146030ab4d7', u'domain_id': u'default', u'name': u'heat'}}
2020-01-15 02:26:04,845 [salt.state       :1951][INFO    ][16658] Completed state [heat] at time 02:26:04.845445 duration_in_ms=1708.049
2020-01-15 02:26:04,846 [salt.state       :1780][INFO    ][16658] Running state [heat] at time 02:26:04.846917
2020-01-15 02:26:04,847 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [heat]
2020-01-15 02:26:09,514 [salt.state       :300 ][INFO    ][16658] user_role_assignmentheat created
2020-01-15 02:26:09,515 [salt.state       :1951][INFO    ][16658] Completed state [heat] at time 02:26:09.515601 duration_in_ms=4668.68
2020-01-15 02:26:09,516 [salt.state       :1780][INFO    ][16658] Running state [panko] at time 02:26:09.516686
2020-01-15 02:26:09,517 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [panko]
2020-01-15 02:26:11,286 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/f6632b3f5f1f4b8abdbe38dd2300cc80'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'f6632b3f5f1f4b8abdbe38dd2300cc80', u'domain_id': u'default', u'name': u'panko'}}
2020-01-15 02:26:11,286 [salt.state       :1951][INFO    ][16658] Completed state [panko] at time 02:26:11.286390 duration_in_ms=1769.706
2020-01-15 02:26:11,287 [salt.state       :1780][INFO    ][16658] Running state [panko] at time 02:26:11.287849
2020-01-15 02:26:11,288 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [panko]
2020-01-15 02:26:16,141 [salt.state       :300 ][INFO    ][16658] user_role_assignmentpanko created
2020-01-15 02:26:16,142 [salt.state       :1951][INFO    ][16658] Completed state [panko] at time 02:26:16.141969 duration_in_ms=4854.119
2020-01-15 02:26:16,142 [salt.state       :1780][INFO    ][16658] Running state [neutron] at time 02:26:16.142313
2020-01-15 02:26:16,142 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [neutron]
2020-01-15 02:26:17,915 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/bfd8696849554d07b774b48ced270f38'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'bfd8696849554d07b774b48ced270f38', u'domain_id': u'default', u'name': u'neutron'}}
2020-01-15 02:26:17,915 [salt.state       :1951][INFO    ][16658] Completed state [neutron] at time 02:26:17.915580 duration_in_ms=1773.266
2020-01-15 02:26:17,916 [salt.state       :1780][INFO    ][16658] Running state [neutron] at time 02:26:17.916868
2020-01-15 02:26:17,917 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [neutron]
2020-01-15 02:26:22,756 [salt.state       :300 ][INFO    ][16658] user_role_assignmentneutron created
2020-01-15 02:26:22,757 [salt.state       :1951][INFO    ][16658] Completed state [neutron] at time 02:26:22.757456 duration_in_ms=4840.586
2020-01-15 02:26:22,758 [salt.state       :1780][INFO    ][16658] Running state [cinder] at time 02:26:22.758128
2020-01-15 02:26:22,758 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [cinder]
2020-01-15 02:26:24,351 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022624336671
2020-01-15 02:26:24,382 [salt.minion      :1432][INFO    ][16742] Starting a new job with PID 16742
2020-01-15 02:26:24,431 [salt.minion      :1711][INFO    ][16742] Returning information for job: 20200115022624336671
2020-01-15 02:26:24,563 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/5783f24bef5e41dd979a00eac2be246d'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'5783f24bef5e41dd979a00eac2be246d', u'domain_id': u'default', u'name': u'cinder'}}
2020-01-15 02:26:24,564 [salt.state       :1951][INFO    ][16658] Completed state [cinder] at time 02:26:24.564158 duration_in_ms=1806.03
2020-01-15 02:26:24,565 [salt.state       :1780][INFO    ][16658] Running state [cinder] at time 02:26:24.565434
2020-01-15 02:26:24,565 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [cinder]
2020-01-15 02:26:29,259 [salt.state       :300 ][INFO    ][16658] user_role_assignmentcinder created
2020-01-15 02:26:29,261 [salt.state       :1951][INFO    ][16658] Completed state [cinder] at time 02:26:29.261671 duration_in_ms=4696.234
2020-01-15 02:26:29,262 [salt.state       :1780][INFO    ][16658] Running state [glance] at time 02:26:29.262465
2020-01-15 02:26:29,263 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [glance]
2020-01-15 02:26:31,040 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/5ccd909ab890472a8aaede99c33b57a9'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'5ccd909ab890472a8aaede99c33b57a9', u'domain_id': u'default', u'name': u'glance'}}
2020-01-15 02:26:31,040 [salt.state       :1951][INFO    ][16658] Completed state [glance] at time 02:26:31.040792 duration_in_ms=1778.326
2020-01-15 02:26:31,043 [salt.state       :1780][INFO    ][16658] Running state [glance] at time 02:26:31.043286
2020-01-15 02:26:31,044 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [glance]
2020-01-15 02:26:35,758 [salt.state       :300 ][INFO    ][16658] user_role_assignmentglance created
2020-01-15 02:26:35,759 [salt.state       :1951][INFO    ][16658] Completed state [glance] at time 02:26:35.759385 duration_in_ms=4716.099
2020-01-15 02:26:35,760 [salt.state       :1780][INFO    ][16658] Running state [barbican] at time 02:26:35.760106
2020-01-15 02:26:35,760 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [barbican]
2020-01-15 02:26:37,548 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/d83fca461ed44b1db556572922563d0f'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'd83fca461ed44b1db556572922563d0f', u'domain_id': u'default', u'name': u'barbican'}}
2020-01-15 02:26:37,548 [salt.state       :1951][INFO    ][16658] Completed state [barbican] at time 02:26:37.548488 duration_in_ms=1788.383
2020-01-15 02:26:37,549 [salt.state       :1780][INFO    ][16658] Running state [barbican] at time 02:26:37.549619
2020-01-15 02:26:37,549 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [barbican]
2020-01-15 02:26:42,504 [salt.state       :300 ][INFO    ][16658] user_role_assignmentbarbican created
2020-01-15 02:26:42,505 [salt.state       :1951][INFO    ][16658] Completed state [barbican] at time 02:26:42.505225 duration_in_ms=4955.602
2020-01-15 02:26:42,507 [salt.state       :1780][INFO    ][16658] Running state [barbican] at time 02:26:42.507303
2020-01-15 02:26:42,508 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [barbican]
2020-01-15 02:26:47,282 [salt.state       :300 ][INFO    ][16658] user_role_assignmentbarbican created
2020-01-15 02:26:47,283 [salt.state       :1951][INFO    ][16658] Completed state [barbican] at time 02:26:47.282909 duration_in_ms=4775.605
2020-01-15 02:26:47,285 [salt.state       :1780][INFO    ][16658] Running state [barbican] at time 02:26:47.285005
2020-01-15 02:26:47,285 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [barbican]
2020-01-15 02:26:52,142 [salt.state       :300 ][INFO    ][16658] user_role_assignmentbarbican created
2020-01-15 02:26:52,143 [salt.state       :1951][INFO    ][16658] Completed state [barbican] at time 02:26:52.143367 duration_in_ms=4858.36
2020-01-15 02:26:52,144 [salt.state       :1780][INFO    ][16658] Running state [gnocchi] at time 02:26:52.144102
2020-01-15 02:26:52,144 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [gnocchi]
2020-01-15 02:26:53,917 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/437ec55b06924e1c9bb68abc3614cb0b'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'437ec55b06924e1c9bb68abc3614cb0b', u'domain_id': u'default', u'name': u'gnocchi'}}
2020-01-15 02:26:53,917 [salt.state       :1951][INFO    ][16658] Completed state [gnocchi] at time 02:26:53.917869 duration_in_ms=1773.768
2020-01-15 02:26:53,919 [salt.state       :1780][INFO    ][16658] Running state [gnocchi] at time 02:26:53.919043
2020-01-15 02:26:53,919 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [gnocchi]
2020-01-15 02:26:54,492 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022654475466
2020-01-15 02:26:54,526 [salt.minion      :1432][INFO    ][16747] Starting a new job with PID 16747
2020-01-15 02:26:54,586 [salt.minion      :1711][INFO    ][16747] Returning information for job: 20200115022654475466
2020-01-15 02:26:58,753 [salt.state       :300 ][INFO    ][16658] user_role_assignmentgnocchi created
2020-01-15 02:26:58,754 [salt.state       :1951][INFO    ][16658] Completed state [gnocchi] at time 02:26:58.754165 duration_in_ms=4835.12
2020-01-15 02:26:58,754 [salt.state       :1780][INFO    ][16658] Running state [designate] at time 02:26:58.754881
2020-01-15 02:26:58,755 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_present for [designate]
2020-01-15 02:27:00,468 [salt.state       :300 ][INFO    ][16658] {u'user': {u'password_expires_at': None, u'links': {u'self': u'http://192.168.10.35:5000/v3/users/e9df3417216549c6a65304ac0306bcfa'}, u'enabled': True, u'email': u'root@localhost', u'options': {u'ignore_change_password_upon_first_use': True, u'lock_password': False, u'ignore_password_expiry': True, u'ignore_lockout_failure_attempts': False}, u'id': u'e9df3417216549c6a65304ac0306bcfa', u'domain_id': u'default', u'name': u'designate'}}
2020-01-15 02:27:00,469 [salt.state       :1951][INFO    ][16658] Completed state [designate] at time 02:27:00.468948 duration_in_ms=1714.067
2020-01-15 02:27:00,470 [salt.state       :1780][INFO    ][16658] Running state [designate] at time 02:27:00.470280
2020-01-15 02:27:00,470 [salt.state       :1813][INFO    ][16658] Executing state keystonev3.user_role_assigned for [designate]
2020-01-15 02:27:05,129 [salt.state       :300 ][INFO    ][16658] user_role_assignmentdesignate created
2020-01-15 02:27:05,130 [salt.state       :1951][INFO    ][16658] Completed state [designate] at time 02:27:05.130114 duration_in_ms=4659.832
2020-01-15 02:27:05,138 [salt.minion      :1711][INFO    ][16658] Returning information for job: 20200115022308457260
2020-01-15 02:27:06,007 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command cmd.run with jid 20200115022705998329
2020-01-15 02:27:06,042 [salt.minion      :1432][INFO    ][16754] Starting a new job with PID 16754
2020-01-15 02:27:06,065 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][16754] Executing command '. /root/keystonercv3; openstack service list' in directory '/root'
2020-01-15 02:27:09,211 [salt.minion      :1711][INFO    ][16754] Returning information for job: 20200115022705998329
2020-01-15 02:27:10,248 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115022710238777
2020-01-15 02:27:10,278 [salt.minion      :1432][INFO    ][16766] Starting a new job with PID 16766
2020-01-15 02:27:17,451 [salt.state       :915 ][INFO    ][16766] Loading fresh modules for state activity
2020-01-15 02:27:17,578 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/init.sls'
2020-01-15 02:27:17,649 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/server.sls'
2020-01-15 02:27:17,926 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/db/offline_sync.sls'
2020-01-15 02:27:17,999 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/_ssl/mysql.sls'
2020-01-15 02:27:18,082 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/_ssl/rabbitmq.sls'
2020-01-15 02:27:18,487 [keyring.backend  :170 ][INFO    ][16766] Loading Windows (alt)
2020-01-15 02:27:18,500 [keyring.backend  :170 ][INFO    ][16766] Loading pyfs
2020-01-15 02:27:18,501 [keyring.backend  :170 ][INFO    ][16766] Loading multi
2020-01-15 02:27:18,502 [keyring.backend  :170 ][INFO    ][16766] Loading Google
2020-01-15 02:27:18,503 [keyring.backend  :170 ][INFO    ][16766] Loading Gnome
2020-01-15 02:27:18,509 [keyring.backend  :170 ][INFO    ][16766] Loading keyczar
2020-01-15 02:27:18,509 [keyring.backend  :170 ][INFO    ][16766] Loading file
2020-01-15 02:27:19,453 [salt.state       :1780][INFO    ][16766] Running state [glance] at time 02:27:19.453762
2020-01-15 02:27:19,454 [salt.state       :1813][INFO    ][16766] Executing state pkg.installed for [glance]
2020-01-15 02:27:19,455 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:27:20,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['apt-cache', '-q', 'policy', 'glance'] in directory '/root'
2020-01-15 02:27:21,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:27:25,297 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022725285993
2020-01-15 02:27:25,312 [salt.minion      :1432][INFO    ][17419] Starting a new job with PID 17419
2020-01-15 02:27:25,334 [salt.minion      :1711][INFO    ][17419] Returning information for job: 20200115022725285993
2020-01-15 02:27:25,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:27:25,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'glance'] in directory '/root'
2020-01-15 02:27:55,359 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022755352213
2020-01-15 02:27:55,377 [salt.minion      :1432][INFO    ][18424] Starting a new job with PID 18424
2020-01-15 02:27:55,406 [salt.minion      :1711][INFO    ][18424] Returning information for job: 20200115022755352213
2020-01-15 02:27:57,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:27:57,676 [salt.state       :300 ][INFO    ][16766] Made the following changes:
'python3-oslo.privsep' changed from 'absent' to '1.32.1-0ubuntu1~cloud0'
'python3.5-psycopg2' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python3-glance-store' changed from 'absent' to '0.28.0-0ubuntu1.1~cloud0'
'python3-oslo-rootwrap' changed from 'absent' to '1'
'python3-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python3-ply' changed from 'absent' to '3.11-1'
'python3-taskflow' changed from 'absent' to '3.4.0-0ubuntu1~cloud0'
'python3-numpy-dev' changed from 'absent' to '1'
'python3-barbicanclient' changed from 'absent' to '4.6.0-0ubuntu1'
'python3-retrying' changed from 'absent' to '1.3.3-3'
'glance' changed from 'absent' to '2:18.0.0-0ubuntu1~cloud0'
'python3-ply-lex-3.10' changed from 'absent' to '1'
'glance-store-common' changed from 'absent' to '0.28.0-0ubuntu1.1~cloud0'
'liblapack3' changed from 'absent' to '3.7.1-4ubuntu1'
'os-brick-common' changed from 'absent' to '2.8.1-0ubuntu1~cloud0'
'python3-oslo.vmware' changed from 'absent' to '2.32.2-0ubuntu1~cloud0'
'python3-ply-yacc-3.10' changed from 'absent' to '1'
'libgfortran4' changed from 'absent' to '7.4.0-1ubuntu1~18.04.1'
'python3-cffi' changed from 'absent' to '1.11.5-1'
'python3-automaton' changed from 'absent' to '1.14.0-0ubuntu1'
'libquadmath0' changed from 'absent' to '8.3.0-6ubuntu1~18.04.1'
'glance-common' changed from 'absent' to '2:18.0.0-0ubuntu1~cloud0'
'python3-oslo.rootwrap' changed from 'absent' to '5.15.2-0ubuntu1~cloud0'
'libpq5' changed from 'absent' to '10.10-0ubuntu0.18.04.1'
'python3-cursive' changed from 'absent' to '0.2.1-0ubuntu1'
'python3-f2py' changed from 'absent' to '1'
'python3-os-brick' changed from 'absent' to '2.8.1-0ubuntu1~cloud0'
'python3-os-win' changed from 'absent' to '4.2.0-0ubuntu1~cloud0'
'python3.6-psycopg2' changed from 'absent' to '1'
'python3-psycopg2' changed from 'absent' to '2.7.4-1'
'liblapack.so.3' changed from 'absent' to '1'
'python3-ddt' changed from 'absent' to '1.1.0-2'
'python3-semantic-version' changed from 'absent' to '2.6.0-2~cloud0'
'python3-networkx' changed from 'absent' to '1.11-1ubuntu3'
'python3-castellan' changed from 'absent' to '1.2.2-0ubuntu1~cloud0'
'python3-glance' changed from 'absent' to '2:18.0.0-0ubuntu1~cloud0'
'gcc-7-base' changed from 'absent' to '7.4.0-1ubuntu1~18.04.1'
'python3-simplegeneric' changed from 'absent' to '0.8.1-1'
'python3-swiftclient' changed from 'absent' to '1:3.7.0-0ubuntu1~cloud0'
'libblas3' changed from 'absent' to '3.7.1-4ubuntu1'
'glance-api' changed from 'absent' to '2:18.0.0-0ubuntu1~cloud0'
'python3-suds' changed from 'absent' to '0.7~git20150727.94664dd-5'
'python3-numpy-abi9' changed from 'absent' to '1'
'python3-numpy-api11' changed from 'absent' to '1'
'python3.6-numpy' changed from 'absent' to '1'
'python3-numpy' changed from 'absent' to '1:1.13.3-2ubuntu1'
'python3-wsme' changed from 'absent' to '0.9.3-2ubuntu1~cloud0'
'python3-pycparser' changed from 'absent' to '2.18-2'

2020-01-15 02:27:57,761 [salt.state       :915 ][INFO    ][16766] Loading fresh modules for state activity
2020-01-15 02:27:57,809 [salt.state       :1951][INFO    ][16766] Completed state [glance] at time 02:27:57.809673 duration_in_ms=38355.913
2020-01-15 02:27:57,814 [salt.state       :1780][INFO    ][16766] Running state [/etc/glance/glance-cache.conf] at time 02:27:57.814466
2020-01-15 02:27:57,814 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/etc/glance/glance-cache.conf]
2020-01-15 02:27:57,859 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/files/stein/glance-cache.conf.Debian'
2020-01-15 02:27:57,974 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_log.conf'
2020-01-15 02:27:58,010 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_policy.conf'
2020-01-15 02:27:58,052 [salt.state       :300 ][INFO    ][16766] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -150,8 +151,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -253,8 +254,6 @@
 #       image locations can sometimes include credentials. Hence, this
 #       is set to ``False`` by default. Set this to ``True`` with
 #       EXTREME CAUTION and ONLY IF you know what you are doing!
-#     * See https://wiki.openstack.org/wiki/OSSN/OSSN-0065 for more
-#       information.
 #     * If an operator wishes to avoid showing any image location(s)
 #       to the user, then both this option and
 #       ``show_image_direct_url`` MUST be set to ``False``.
@@ -270,14 +269,9 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: Use of this option, deprecated since Newton, is a security risk and
-# will be removed once we figure out a way to satisfy those use cases that
-# currently require it.  An earlier announcement that the same functionality can
-# be achieved with greater granularity by using policies is incorrect.  You
-# cannot work around this option via policy configuration at the present time,
-# though that is the direction we believe the fix will take.  Please keep an eye
-# on the Glance release notes to stay up to date on progress in addressing this
-# issue.
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
 #show_multiple_locations = false
 
 #
@@ -387,8 +381,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -407,10 +401,6 @@
 #     * None
 #
 #  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #pydev_worker_debug_host = localhost
 
 #
@@ -590,7 +580,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#image_cache_max_size = 10737418240
+image_cache_max_size = 10737418240
 
 #
 # The amount of time, in seconds, an incomplete image remains in the cache.
@@ -615,7 +605,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#image_cache_stall_time = 86400
+image_cache_stall_time = 86400
 
 #
 # Base directory for image cache.
@@ -648,7 +638,7 @@
 #     * ``image_cache_sqlite_db``
 #
 #  (string value)
-#image_cache_dir = <None>
+image_cache_dir = /var/lib/glance/image-cache/
 
 # DEPRECATED:
 # Address the registry server is hosted on.
@@ -666,8 +656,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_host = 0.0.0.0
 
 # DEPRECATED:
@@ -688,8 +678,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_port = 9191
 
 # DEPRECATED:
@@ -725,8 +715,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_protocol = http
 
 # DEPRECATED:
@@ -754,12 +744,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED:
@@ -788,12 +774,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_cert_file = /etc/ssl/certs/file.crt
 
 # DEPRECATED:
@@ -824,12 +806,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_ca_file = /etc/ssl/cafile/file.ca
 
 # DEPRECATED:
@@ -860,8 +838,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_insecure = false
 
 # DEPRECATED:
@@ -888,8 +866,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_timeout = 600
 
 # DEPRECATED: Whether to pass through the user token when making requests to the
@@ -965,7 +943,6 @@
 # Related functionality with uploading big images has been implemented with
 # Keystone trusts support.
 #auth_region = <None>
-
 #
 # From oslo.log
 #
@@ -980,7 +957,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -995,6 +972,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/glance/image-cache.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -1003,19 +981,19 @@
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
 #watch_log_file = false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_syslog = false
 
 # Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
@@ -1031,67 +1009,33 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when the
-# service was started) is used when scheduling the next rotation. (string value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is
-# DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
@@ -1104,14 +1048,15 @@
 # Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
 # value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
+
 
 
 [glance_store]
@@ -1148,7 +1093,7 @@
 # ``enabled_backends`` which helps to configure multiple backend stores
 # of different schemes.
 #
-# This option is scheduled for removal in the Train development
+# This option is scheduled for removal in the Stein development
 # cycle.
 #stores = file,http
 
@@ -1201,7 +1146,7 @@
 # ``default_backend`` which acts similar to ``default_store`` config
 # option.
 #
-# This option is scheduled for removal in the Train development
+# This option is scheduled for removal in the Stein development
 # cycle.
 #default_store = file
 
@@ -1221,8 +1166,8 @@
 # integer value greater than zero to enable this option.
 #
 # NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-
-# specs/specs/kilo/store-capabilities.html
+# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
+# /store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
@@ -1326,6 +1271,9 @@
 #  (string value)
 # Deprecated group/name - [glance_store]/os_region_name
 #cinder_os_region_name = <None>
+
+cinder_os_region_name = RegionOne
+
 
 #
 # Location of a CA certificates file used for cinder client requests.
@@ -1620,23 +1568,6 @@
 #filesystem_store_file_perm = 0
 
 #
-# Chunk size, in bytes.
-#
-# The chunk size used when reading or writing image files. Raising this value
-# may improve the throughput but it may also slightly increase the memory usage
-# when handling a large number of requests.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#filesystem_store_chunk_size = 65536
-
-#
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
@@ -1900,10 +1831,6 @@
 #     * swift_store_auth_insecure
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
 
 #
@@ -1933,10 +1860,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #swift_store_region = RegionTwo
 
 #
@@ -1959,10 +1882,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
 
 #
@@ -2414,217 +2333,23 @@
 #  (string value)
 #swift_upload_buffer_dir = <None>
 
-#
-# Address of the ESX/ESXi or vCenter Server target system.
-#
-# This configuration option sets the address of the ESX/ESXi or vCenter
-# Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
-# a DNS name (www.my-domain.com).
-#
-# Possible Values:
-#     * A valid IPv4 or IPv6 address
-#     * A valid DNS name
-#
-# Related options:
-#     * vmware_server_username
-#     * vmware_server_password
-#
-#  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_host = 127.0.0.1
-
-#
-# Server username.
-#
-# This configuration option takes the username for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is the username for a user with appropriate
-#       privileges
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_password
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_username = root
-
-#
-# Server password.
-#
-# This configuration option takes the password for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is a password corresponding to the username
-#       specified using the "vmware_server_username" option
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_username
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_password = vmware
-
-#
-# The number of VMware API retries.
-#
-# This configuration option specifies the number of times the VMware
-# ESX/VC server API must be retried upon connection related issues or
-# server API call overload. It is not possible to specify 'retry
-# forever'.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_api_retry_count = 10
-
-#
-# Interval in seconds used for polling remote tasks invoked on VMware
-# ESX/VC server.
-#
-# This configuration option takes in the sleep time in seconds for polling an
-# on-going async task as part of the VMWare ESX/VC server API call.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_task_poll_interval = 5
-
-#
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
-# glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
-# is openstack_glance.
-#
-# Possible Values:
-#     * Any string that is a valid path to a directory
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#vmware_store_image_dir = /openstack_glance
-
-#
-# Set verification of the ESX/vCenter server certificate.
-#
-# This configuration option takes a boolean value to determine
-# whether or not to verify the ESX/vCenter server certificate. If this
-# option is set to True, the ESX/vCenter server certificate is not
-# verified. If this option is set to False, then the default CA
-# truststore is used for verification.
-#
-# This option is ignored if the "vmware_ca_file" option is set. In that
-# case, the ESX/vCenter server certificate will then be verified using
-# the file specified using the "vmware_ca_file" option .
-#
-# Possible Values:
-#     * True
-#     * False
-#
-# Related options:
-#     * vmware_ca_file
-#
-#  (boolean value)
-# Deprecated group/name - [glance_store]/vmware_api_insecure
-#vmware_insecure = false
-
-#
-# Absolute path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Cerificate Authority File to verify the ESX/vCenter certificate.
-#
-# If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
-# server certificate and establish a secure connection to the server.
-#
-# Possible Values:
-#     * Any string that is a valid absolute path to a CA file
-#
-# Related options:
-#     * vmware_insecure
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The datastores where the image can be stored.
-#
-# This configuration option specifies the datastores where the image can
-# be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
-# should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
-# by ":" to specify the priority. Thus, the required format becomes
-# <datacenter_path>:<datastore_name>:<optional_weight>.
-#
-# When adding an image, the datastore with highest weight will be
-# selected, unless there is not enough free space available in cases
-# where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
-# last. If multiple datastores have the same weight, then the one with
-# the most free space available is selected.
-#
-# Possible Values:
-#     * Any string of the format:
-#       <datacenter_path>:<datastore_name>:<optional_weight>
-#
-# Related options:
-#    * None
-#
-#  (multi valued)
-#vmware_datastores =
-
 
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is compared
+# to the ``scope_types`` of the policy being enforced. If the scopes do not
+# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
+# will be logged informing operators that policies are being invoked with
+# mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
+policy_file = /etc/glance/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
 #policy_default_rule = default
@@ -2654,3 +2379,4 @@
 
 # Absolute path client key file REST based policy check (string value)
 #remote_ssl_client_key_file = <None>
+

2020-01-15 02:27:58,055 [salt.state       :1951][INFO    ][16766] Completed state [/etc/glance/glance-cache.conf] at time 02:27:58.055472 duration_in_ms=241.004
2020-01-15 02:27:58,059 [salt.state       :1780][INFO    ][16766] Running state [glance_ssl_mysql] at time 02:27:58.059629
2020-01-15 02:27:58,060 [salt.state       :1813][INFO    ][16766] Executing state test.show_notification for [glance_ssl_mysql]
2020-01-15 02:27:58,060 [salt.state       :300 ][INFO    ][16766] Running glance._ssl.mysql
2020-01-15 02:27:58,061 [salt.state       :1951][INFO    ][16766] Completed state [glance_ssl_mysql] at time 02:27:58.061311 duration_in_ms=1.683
2020-01-15 02:27:58,062 [salt.state       :1780][INFO    ][16766] Running state [glance_ssl_rabbitmq] at time 02:27:58.062048
2020-01-15 02:27:58,062 [salt.state       :1813][INFO    ][16766] Executing state test.show_notification for [glance_ssl_rabbitmq]
2020-01-15 02:27:58,063 [salt.state       :300 ][INFO    ][16766] Running glance._ssl.rabbitmq
2020-01-15 02:27:58,063 [salt.state       :1951][INFO    ][16766] Completed state [glance_ssl_rabbitmq] at time 02:27:58.063797 duration_in_ms=1.749
2020-01-15 02:27:58,065 [salt.state       :1780][INFO    ][16766] Running state [/etc/glance/glance-registry.conf] at time 02:27:58.065064
2020-01-15 02:27:58,065 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/etc/glance/glance-registry.conf]
2020-01-15 02:27:58,113 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/files/stein/glance-registry.conf.Debian'
2020-01-15 02:27:58,315 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_database.conf'
2020-01-15 02:27:58,347 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/keystonemiddleware/_auth_token.conf'
2020-01-15 02:27:58,382 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/keystoneauth/_type_password.conf'
2020-01-15 02:27:58,439 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_cache.conf'
2020-01-15 02:27:58,473 [salt.state       :300 ][INFO    ][16766] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -233,8 +234,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -336,8 +337,6 @@
 #       image locations can sometimes include credentials. Hence, this
 #       is set to ``False`` by default. Set this to ``True`` with
 #       EXTREME CAUTION and ONLY IF you know what you are doing!
-#     * See https://wiki.openstack.org/wiki/OSSN/OSSN-0065 for more
-#       information.
 #     * If an operator wishes to avoid showing any image location(s)
 #       to the user, then both this option and
 #       ``show_image_direct_url`` MUST be set to ``False``.
@@ -353,14 +352,9 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: Use of this option, deprecated since Newton, is a security risk and
-# will be removed once we figure out a way to satisfy those use cases that
-# currently require it.  An earlier announcement that the same functionality can
-# be achieved with greater granularity by using policies is incorrect.  You
-# cannot work around this option via policy configuration at the present time,
-# though that is the direction we believe the fix will take.  Please keep an eye
-# on the Glance release notes to stay up to date on progress in addressing this
-# issue.
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
 #show_multiple_locations = false
 
 #
@@ -470,8 +464,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -490,10 +484,6 @@
 #     * None
 #
 #  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #pydev_worker_debug_host = localhost
 
 #
@@ -611,7 +601,7 @@
 #     * None
 #
 #  (host address value)
-#bind_host = 0.0.0.0
+bind_host = 192.168.10.36
 
 #
 # Port number on which the server will listen.
@@ -630,7 +620,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#bind_port = <None>
+bind_port = 9191
 
 #
 # Set the number of incoming connection requests.
@@ -691,10 +681,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #ca_file = /etc/ssl/cafile
 
 #
@@ -717,10 +703,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #cert_file = /etc/ssl/certs
 
 #
@@ -737,10 +719,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED: The HTTP header used to determine the scheme for the original
@@ -776,7 +754,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#workers = <None>
+workers = 8
 
 #
 # Maximum line size of message headers.
@@ -846,7 +824,6 @@
 #  (integer value)
 # Minimum value: 0
 #client_socket_timeout = 900
-
 #
 # From oslo.log
 #
@@ -861,7 +838,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -876,6 +853,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/glance/registry.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -884,19 +862,19 @@
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
 #watch_log_file = false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_syslog = false
 
 # Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
@@ -912,67 +890,33 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when the
-# service was started) is used when scheduling the next rotation. (string value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is
-# DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
@@ -985,56 +929,18 @@
 # Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
 # value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = rabbit://
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
 
 
 [database]
-
 #
 # From oslo.db
 #
@@ -1052,14 +958,14 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://glance:opnfv_secret@192.168.10.23/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
@@ -1076,9 +982,10 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 # This option is deprecated for removal.
@@ -1087,17 +994,19 @@
 # sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -1108,6 +1017,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -1124,8 +1034,8 @@
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
@@ -1147,14 +1057,6 @@
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
 
 
 [keystone_authtoken]
@@ -1164,14 +1066,16 @@
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -1184,9 +1088,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -1199,8 +1104,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -1224,10 +1129,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -1237,33 +1143,29 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 
 # In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -1289,12 +1191,20 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
-# value)
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
 
 # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
 # single algorithm or multiple. The algorithms are those supported by Python
@@ -1312,23 +1222,175 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = glance
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
 
 
 [oslo_messaging_amqp]
@@ -1373,6 +1435,12 @@
 # virtual host name instead of the DNS name. (boolean value)
 #ssl_verify_vhost = false
 
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
 # Space separated list of acceptable SASL mechanisms (string value)
 #sasl_mechanisms =
 
@@ -1384,6 +1452,18 @@
 
 # SASL realm to use if no realm present in username (string value)
 #sasl_default_realm =
+
+# DEPRECATED: User name for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the username.
+#username =
+
+# DEPRECATED: Password for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the password.
+#password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
 # Minimum value: 1
@@ -1521,6 +1601,20 @@
 # From oslo.messaging
 #
 
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
 # Max fetch bytes of Kafka consumer (integer value)
 #kafka_max_fetch_bytes = 1048576
 
@@ -1613,6 +1707,8 @@
 #
 
 # Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
@@ -1661,6 +1757,39 @@
 # shuffle - <No description provided>
 #kombu_failover_strategy = round-robin
 
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
 # The RabbitMQ login method. (string value)
 # Possible values:
 # PLAIN - <No description provided>
@@ -1668,6 +1797,12 @@
 # RABBIT-CR-DEMO - <No description provided>
 #rabbit_login_method = AMQPLAIN
 
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
 
@@ -1678,6 +1813,12 @@
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
 #rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
 
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
@@ -1707,22 +1848,172 @@
 #heartbeat_rate = 2
 
 
+[oslo_messaging_zmq]
+
+#
+# From oslo.messaging
+#
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger period.
+# The value of 0 specifies no linger period. Pending messages shall be discarded
+# immediately when the socket is closed. Positive values specify an upper bound
+# for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about existing target (
+# < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to skip
+# any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value and
+# 0) means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0) means
+# to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is not
+# tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is compared
+# to the ``scope_types`` of the policy being enforced. If the scopes do not
+# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
+# will be logged informing operators that policies are being invoked with
+# mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
+policy_file = /etc/glance/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
 #policy_default_rule = default
@@ -1754,6 +2045,7 @@
 #remote_ssl_client_key_file = <None>
 
 
+
 [paste_deploy]
 
 #
@@ -1779,11 +2071,7 @@
 #     * config_file
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#flavor = keystone
+flavor = keystone
 
 #
 # Name of the paste configuration file.
@@ -1815,10 +2103,6 @@
 #     * flavor
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #config_file = glance-api-paste.ini
 
 
@@ -1933,3 +2217,86 @@
 # * False: Disable the filter.
 #  (boolean value)
 #filter_error_trace = false
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+

2020-01-15 02:27:58,475 [salt.state       :1951][INFO    ][16766] Completed state [/etc/glance/glance-registry.conf] at time 02:27:58.475418 duration_in_ms=410.354
2020-01-15 02:27:58,476 [salt.state       :1780][INFO    ][16766] Running state [/etc/glance/glance-scrubber.conf] at time 02:27:58.476271
2020-01-15 02:27:58,476 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/etc/glance/glance-scrubber.conf]
2020-01-15 02:27:58,508 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/files/stein/glance-scrubber.conf.Debian'
2020-01-15 02:27:58,784 [salt.state       :300 ][INFO    ][16766] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -150,8 +151,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -253,8 +254,6 @@
 #       image locations can sometimes include credentials. Hence, this
 #       is set to ``False`` by default. Set this to ``True`` with
 #       EXTREME CAUTION and ONLY IF you know what you are doing!
-#     * See https://wiki.openstack.org/wiki/OSSN/OSSN-0065 for more
-#       information.
 #     * If an operator wishes to avoid showing any image location(s)
 #       to the user, then both this option and
 #       ``show_image_direct_url`` MUST be set to ``False``.
@@ -270,14 +269,9 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: Use of this option, deprecated since Newton, is a security risk and
-# will be removed once we figure out a way to satisfy those use cases that
-# currently require it.  An earlier announcement that the same functionality can
-# be achieved with greater granularity by using policies is incorrect.  You
-# cannot work around this option via policy configuration at the present time,
-# though that is the direction we believe the fix will take.  Please keep an eye
-# on the Glance release notes to stay up to date on progress in addressing this
-# issue.
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
 #show_multiple_locations = false
 
 #
@@ -387,8 +381,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -407,10 +401,6 @@
 #     * None
 #
 #  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #pydev_worker_debug_host = localhost
 
 #
@@ -605,7 +595,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#wakeup_time = 300
+wakeup_time = 300
 
 #
 # Run scrubber as a daemon.
@@ -628,7 +618,7 @@
 #     * ``wakeup_time``
 #
 #  (boolean value)
-#daemon = false
+daemon = false
 
 #
 # Restore the image status from 'pending_delete' to 'active'.
@@ -644,7 +634,6 @@
 #
 #  (string value)
 #restore = <None>
-
 #
 # From oslo.log
 #
@@ -659,7 +648,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -674,6 +663,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/glance/scrubber.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -682,19 +672,19 @@
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
 #watch_log_file = false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_syslog = false
 
 # Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
@@ -710,67 +700,33 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when the
-# service was started) is used when scheduling the next rotation. (string value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is
-# DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
@@ -783,9 +739,9 @@
 # Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
 # value)
 #rate_limit_except_level = CRITICAL
 
@@ -793,8 +749,8 @@
 #fatal_deprecations = false
 
 
+
 [database]
-
 #
 # From oslo.db
 #
@@ -812,14 +768,14 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://glance:opnfv_secret@192.168.10.23/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
@@ -836,9 +792,10 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 # This option is deprecated for removal.
@@ -847,17 +804,19 @@
 # sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -868,6 +827,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -884,8 +844,8 @@
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
@@ -907,14 +867,6 @@
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
 
 
 [glance_store]
@@ -951,7 +903,7 @@
 # ``enabled_backends`` which helps to configure multiple backend stores
 # of different schemes.
 #
-# This option is scheduled for removal in the Train development
+# This option is scheduled for removal in the Stein development
 # cycle.
 #stores = file,http
 
@@ -1004,7 +956,7 @@
 # ``default_backend`` which acts similar to ``default_store`` config
 # option.
 #
-# This option is scheduled for removal in the Train development
+# This option is scheduled for removal in the Stein development
 # cycle.
 #default_store = file
 
@@ -1024,8 +976,8 @@
 # integer value greater than zero to enable this option.
 #
 # NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-
-# specs/specs/kilo/store-capabilities.html
+# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
+# /store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
@@ -1423,23 +1375,6 @@
 #filesystem_store_file_perm = 0
 
 #
-# Chunk size, in bytes.
-#
-# The chunk size used when reading or writing image files. Raising this value
-# may improve the throughput but it may also slightly increase the memory usage
-# when handling a large number of requests.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#filesystem_store_chunk_size = 65536
-
-#
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
@@ -1703,10 +1638,6 @@
 #     * swift_store_auth_insecure
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
 
 #
@@ -1736,10 +1667,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #swift_store_region = RegionTwo
 
 #
@@ -1762,10 +1689,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
 
 #
@@ -2234,10 +2157,6 @@
 #     * vmware_server_password
 #
 #  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #vmware_server_host = 127.0.0.1
 
 #
@@ -2256,10 +2175,6 @@
 #     * vmware_server_password
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #vmware_server_username = root
 
 #
@@ -2278,10 +2193,6 @@
 #     * vmware_server_username
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #vmware_server_password = vmware
 
 #
@@ -2377,10 +2288,6 @@
 #     * vmware_insecure
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
 
 #
@@ -2414,36 +2321,23 @@
 
 [oslo_concurrency]
 
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory should
-# only be writable by the user running the processes that need locking. Defaults
-# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
-# path must be set. (string value)
-#lock_path = <None>
-
 
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is compared
+# to the ``scope_types`` of the policy being enforced. If the scopes do not
+# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
+# will be logged informing operators that policies are being invoked with
+# mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
+policy_file = /etc/glance/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
 #policy_default_rule = default
@@ -2473,3 +2367,4 @@
 
 # Absolute path client key file REST based policy check (string value)
 #remote_ssl_client_key_file = <None>
+

2020-01-15 02:27:58,786 [salt.state       :1951][INFO    ][16766] Completed state [/etc/glance/glance-scrubber.conf] at time 02:27:58.786428 duration_in_ms=310.155
2020-01-15 02:27:58,787 [salt.state       :1780][INFO    ][16766] Running state [/etc/glance/glance-api.conf] at time 02:27:58.787717
2020-01-15 02:27:58,788 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/etc/glance/glance-api.conf]
2020-01-15 02:27:58,857 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/files/stein/glance-api.conf.Debian'
2020-01-15 02:27:59,071 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/messaging/_default.conf'
2020-01-15 02:27:59,110 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_cors.conf'
2020-01-15 02:27:59,231 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/messaging/_amqp.conf'
2020-01-15 02:27:59,257 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/messaging/_rabbit.conf'
2020-01-15 02:27:59,311 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/messaging/_notifications.conf'
2020-01-15 02:27:59,341 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_middleware.conf'
2020-01-15 02:27:59,383 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/castellan/_barbican.conf'
2020-01-15 02:27:59,644 [salt.state       :300 ][INFO    ][16766] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -166,55 +168,6 @@
 #  (string value)
 #hashing_algorithm = sha512
 
-#
-# Maximum number of image members per image.
-#
-# This limits the maximum of users an image can be shared with. Any negative
-# value is interpreted as unlimited.
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#image_member_quota = 128
-
-#
-# Maximum number of properties allowed on an image.
-#
-# This enforces an upper limit on the number of additional properties an image
-# can have. Any negative value is interpreted as unlimited.
-#
-# NOTE: This won't have any impact if additional properties are disabled. Please
-# refer to ``allow_additional_image_properties``.
-#
-# Related options:
-#     * ``allow_additional_image_properties``
-#
-#  (integer value)
-#image_property_quota = 128
-
-#
-# Maximum number of tags allowed on an image.
-#
-# Any negative value is interpreted as unlimited.
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#image_tag_quota = 128
-
-#
-# Maximum number of locations allowed on an image.
-#
-# Any negative value is interpreted as unlimited.
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#image_location_quota = 10
-
 # DEPRECATED:
 # Python module path of data access API.
 #
@@ -254,8 +207,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -283,7 +236,7 @@
 #
 #  (integer value)
 # Minimum value: 1
-#limit_param_default = 25
+limit_param_default = 25
 
 #
 # Maximum number of results that could be returned by a request.
@@ -308,7 +261,7 @@
 #
 #  (integer value)
 # Minimum value: 1
-#api_limit_max = 1000
+api_limit_max = 1000
 
 #
 # Show direct image location when returning an image.
@@ -340,7 +293,7 @@
 #     * location_strategy
 #
 #  (boolean value)
-#show_image_direct_url = false
+show_image_direct_url = false
 
 # DEPRECATED:
 # Show all image locations when returning an image.
@@ -357,8 +310,6 @@
 #       image locations can sometimes include credentials. Hence, this
 #       is set to ``False`` by default. Set this to ``True`` with
 #       EXTREME CAUTION and ONLY IF you know what you are doing!
-#     * See https://wiki.openstack.org/wiki/OSSN/OSSN-0065 for more
-#       information.
 #     * If an operator wishes to avoid showing any image location(s)
 #       to the user, then both this option and
 #       ``show_image_direct_url`` MUST be set to ``False``.
@@ -374,15 +325,10 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: Use of this option, deprecated since Newton, is a security risk and
-# will be removed once we figure out a way to satisfy those use cases that
-# currently require it.  An earlier announcement that the same functionality can
-# be achieved with greater granularity by using policies is incorrect.  You
-# cannot work around this option via policy configuration at the present time,
-# though that is the direction we believe the fix will take.  Please keep an eye
-# on the Glance release notes to stay up to date on progress in addressing this
-# issue.
-#show_multiple_locations = false
+# Reason: This option will be removed in the Pike release or later because the
+# same functionality can be achieved with greater granularity by using policies.
+# Please see the Newton release notes for more information.
+show_multiple_locations = false
 
 #
 # Maximum size of image a user can upload in bytes.
@@ -411,30 +357,6 @@
 #image_size_cap = 1099511627776
 
 #
-# Maximum amount of image storage per tenant.
-#
-# This enforces an upper limit on the cumulative storage consumed by all images
-# of a tenant across all stores. This is a per-tenant limit.
-#
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
-# are invalid and result in errors.
-#
-# Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
-#       representing the storage value and an optional string literal
-#       representing storage units as mentioned above.
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#user_storage_quota = 0
-
-#
 # Deploy the v2 OpenStack Images API.
 #
 # When this option is set to ``True``, Glance service will respond
@@ -491,8 +413,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -511,10 +433,6 @@
 #     * None
 #
 #  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #pydev_worker_debug_host = localhost
 
 #
@@ -641,7 +559,7 @@
 # Possible values:
 # location_order - <No description provided>
 # store_type - <No description provided>
-#location_strategy = location_order
+location_strategy = location_order
 
 #
 # The location of the property protection file.
@@ -738,7 +656,7 @@
 #     * None
 #
 #  (host address value)
-#bind_host = 0.0.0.0
+bind_host = 192.168.10.36
 
 #
 # Port number on which the server will listen.
@@ -757,7 +675,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#bind_port = <None>
+bind_port = 9292
 
 #
 # Number of Glance worker processes to start.
@@ -784,7 +702,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#workers = <None>
+workers = 8
 
 #
 # Maximum line size of message headers.
@@ -914,10 +832,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #ca_file = /etc/ssl/cafile
 
 #
@@ -940,10 +854,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #cert_file = /etc/ssl/certs
 
 #
@@ -960,10 +870,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED: The HTTP header used to determine the scheme for the original
@@ -973,150 +879,6 @@
 # Its value may be silently ignored in the future.
 # Reason: Use the http_proxy_to_wsgi middleware instead.
 #secure_proxy_ssl_header = <None>
-
-# Key:Value pair of store identifier and store type. In case of multiple
-# backends should be separated using comma. (dict value)
-#enabled_backends = <None>
-
-#
-# The relative path to sqlite file database that will be used for image cache
-# management.
-#
-# This is a relative path to the sqlite file database that tracks the age and
-# usage statistics of image cache. The path is relative to image cache base
-# directory, specified by the configuration option ``image_cache_dir``.
-#
-# This is a lightweight database with just one table.
-#
-# Possible values:
-#     * A valid relative path to sqlite file database
-#
-# Related options:
-#     * ``image_cache_dir``
-#
-#  (string value)
-#image_cache_sqlite_db = cache.db
-
-#
-# The driver to use for image cache management.
-#
-# This configuration option provides the flexibility to choose between the
-# different image-cache drivers available. An image-cache driver is responsible
-# for providing the essential functions of image-cache like write images to/read
-# images from cache, track age and usage of cached images, provide a list of
-# cached images, fetch size of the cache, queue images for caching and clean up
-# the cache, etc.
-#
-# The essential functions of a driver are defined in the base class
-# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing
-# and prospective) must implement this interface. Currently available drivers
-# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they
-# store the information about cached images:
-#     * The ``sqlite`` driver uses a sqlite database (which sits on every glance
-#     node locally) to track the usage of cached images.
-#     * The ``xattr`` driver uses the extended attributes of files to store this
-#     information. It also requires a filesystem that sets ``atime`` on the
-# files
-#     when accessed.
-#
-# Possible values:
-#     * sqlite
-#     * xattr
-#
-# Related options:
-#     * None
-#
-#  (string value)
-# Possible values:
-# sqlite - <No description provided>
-# xattr - <No description provided>
-#image_cache_driver = sqlite
-
-#
-# The upper limit on cache size, in bytes, after which the cache-pruner cleans
-# up the image cache.
-#
-# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a
-# hard limit beyond which the image cache would never grow. In fact, depending
-# on how often the cache-pruner runs and how quickly the cache fills, the image
-# cache can far exceed the size specified here very easily. Hence, care must be
-# taken to appropriately schedule the cache-pruner and in setting this limit.
-#
-# Glance caches an image when it is downloaded. Consequently, the size of the
-# image cache grows over time as the number of downloads increases. To keep the
-# cache size from becoming unmanageable, it is recommended to run the
-# cache-pruner as a periodic task. When the cache pruner is kicked off, it
-# compares the current size of image cache and triggers a cleanup if the image
-# cache grew beyond the size specified here. After the cleanup, the size of
-# cache is less than or equal to size specified here.
-#
-# Possible values:
-#     * Any non-negative integer
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#image_cache_max_size = 10737418240
-
-#
-# The amount of time, in seconds, an incomplete image remains in the cache.
-#
-# Incomplete images are images for which download is in progress. Please see the
-# description of configuration option ``image_cache_dir`` for more detail.
-# Sometimes, due to various reasons, it is possible the download may hang and
-# the incompletely downloaded image remains in the ``incomplete`` directory.
-# This configuration option sets a time limit on how long the incomplete images
-# should remain in the ``incomplete`` directory before they are cleaned up.
-# Once an incomplete image spends more time than is specified here, it'll be
-# removed by cache-cleaner on its next run.
-#
-# It is recommended to run cache-cleaner as a periodic task on the Glance API
-# nodes to keep the incomplete images from occupying disk space.
-#
-# Possible values:
-#     * Any non-negative integer
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#image_cache_stall_time = 86400
-
-#
-# Base directory for image cache.
-#
-# This is the location where image data is cached and served out of. All cached
-# images are stored directly under this directory. This directory also contains
-# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``.
-#
-# The ``incomplete`` subdirectory is the staging area for downloading images. An
-# image is first downloaded to this directory. When the image download is
-# successful it is moved to the base directory. However, if the download fails,
-# the partially downloaded image file is moved to the ``invalid`` subdirectory.
-#
-# The ``queue``subdirectory is used for queuing images for download. This is
-# used primarily by the cache-prefetcher, which can be scheduled as a periodic
-# task like cache-pruner and cache-cleaner, to cache images ahead of their
-# usage.
-# Upon receiving the request to cache an image, Glance touches a file in the
-# ``queue`` directory with the image id as the file name. The cache-prefetcher,
-# when running, polls for the files in ``queue`` directory and starts
-# downloading them in the order they were created. When the download is
-# successful, the zero-sized file is deleted from the ``queue`` directory.
-# If the download fails, the zero-sized file remains and it'll be retried the
-# next time cache-prefetcher runs.
-#
-# Possible values:
-#     * A valid path
-#
-# Related options:
-#     * ``image_cache_sqlite_db``
-#
-#  (string value)
-#image_cache_dir = <None>
 
 #
 # Default publisher_id for outgoing Glance notifications.
@@ -1181,9 +943,9 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#registry_host = 0.0.0.0
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+registry_host = 192.168.10.35
 
 # DEPRECATED:
 # Port the registry server is listening on.
@@ -1203,9 +965,9 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#registry_port = 9191
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
+registry_port = 9191
 
 # DEPRECATED: Whether to pass through the user token when making requests to the
 # registry. To prevent failures with token expiration during big files upload,
@@ -1314,8 +1076,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_protocol = http
 
 # DEPRECATED:
@@ -1343,12 +1105,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED:
@@ -1377,12 +1135,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_cert_file = /etc/ssl/certs/file.crt
 
 # DEPRECATED:
@@ -1413,12 +1167,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_ca_file = /etc/ssl/cafile/file.ca
 
 # DEPRECATED:
@@ -1449,8 +1199,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_insecure = false
 
 # DEPRECATED:
@@ -1477,8 +1227,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-
-# specs/specs/queens/approved/glance/deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
+# /deprecate-registry.html
 #registry_client_timeout = 600
 
 #
@@ -1587,7 +1337,6 @@
 #
 #  (boolean value)
 #delayed_delete = false
-
 #
 # From oslo.log
 #
@@ -1602,7 +1351,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -1625,19 +1374,19 @@
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
 #watch_log_file = false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_syslog = false
 
 # Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
@@ -1653,67 +1402,33 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when the
-# service was started) is used when scheduling the next rotation. (string value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is
-# DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
@@ -1726,9 +1441,9 @@
 # Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
 # value)
 #rate_limit_except_level = CRITICAL
 
@@ -1747,6 +1462,151 @@
 
 # The time-to-live in sec of idle connections in the pool (integer value)
 #conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
 
 # Size of executor thread pool when executor is threading or eventlet. (integer
 # value)
@@ -1767,295 +1627,39 @@
 # oslo_messaging.TransportURL at
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
-#transport_url = rabbit://
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-
-[cinder]
-
-#
-# From glance.multi_store
-#
-
-#
-# Information to match when looking for cinder in the service catalog.
-#
-# When the ``cinder_endpoint_template`` is not set and any of
-# ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, ``cinder_store_password`` is not set,
-# cinder store uses this information to lookup cinder endpoint from the service
-# catalog in the current context. ``cinder_os_region_name``, if set, is taken
-# into consideration to fetch the appropriate endpoint.
-#
-# The service catalog can be listed by the ``openstack catalog list`` command.
-#
-# Possible values:
-#     * A string of of the following form:
-#       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
-#       ``service_name`` can be omitted.
-#
-# Related options:
-#     * cinder_os_region_name
-#     * cinder_endpoint_template
-#     * cinder_store_auth_address
-#     * cinder_store_user_name
-#     * cinder_store_project_name
-#     * cinder_store_password
-#
-#  (string value)
-#cinder_catalog_info = volumev2::publicURL
-
-#
-# Override service catalog lookup with template for cinder endpoint.
-#
-# When this option is set, this value is used to generate cinder endpoint,
-# instead of looking up from the service catalog.
-# This value is ignored if ``cinder_store_auth_address``,
-# ``cinder_store_user_name``, ``cinder_store_project_name``, and
-# ``cinder_store_password`` are specified.
-#
-# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
-#
-# Possible values:
-#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
-#       replaced with the current tenant (project) name.
-#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
-#
-# Related options:
-#     * cinder_store_auth_address
-#     * cinder_store_user_name
-#     * cinder_store_project_name
-#     * cinder_store_password
-#     * cinder_catalog_info
-#
-#  (string value)
-#cinder_endpoint_template = <None>
-
-#
-# Region name to lookup cinder service from the service catalog.
-#
-# This is used only when ``cinder_catalog_info`` is used for determining the
-# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
-# the specified region. It is useful when multiple regions are listed in the
-# catalog. If this is not set, the endpoint is looked up from every region.
-#
-# Possible values:
-#     * A string that is a valid region name.
-#
-# Related options:
-#     * cinder_catalog_info
-#
-#  (string value)
-# Deprecated group/name - [cinder]/os_region_name
-#cinder_os_region_name = <None>
-
-#
-# Location of a CA certificates file used for cinder client requests.
-#
-# The specified CA certificates file, if set, is used to verify cinder
-# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
-# ignored.
-# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
-#
-# Possible values:
-#     * Path to a ca certificates file
-#
-# Related options:
-#     * cinder_api_insecure
-#
-#  (string value)
-#cinder_ca_certificates_file = <None>
-
-#
-# Number of cinderclient retries on failed http calls.
-#
-# When a call failed by any errors, cinderclient will retry the call up to the
-# specified times after sleeping a few seconds.
-#
-# Possible values:
-#     * A positive integer
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#cinder_http_retries = 3
-
-#
-# Time period, in seconds, to wait for a cinder volume transition to
-# complete.
-#
-# When the cinder volume is created, deleted, or attached to the glance node to
-# read/write the volume data, the volume's state is changed. For example, the
-# newly created volume status changes from ``creating`` to ``available`` after
-# the creation process is completed. This specifies the maximum time to wait for
-# the status change. If a timeout occurs while waiting, or the status is changed
-# to an unexpected value (e.g. `error``), the image creation fails.
-#
-# Possible values:
-#     * A positive integer
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#cinder_state_transition_timeout = 300
-
-#
-# Allow to perform insecure SSL requests to cinder.
-#
-# If this option is set to True, HTTPS endpoint connection is verified using the
-# CA certificates file specified by ``cinder_ca_certificates_file`` option.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * cinder_ca_certificates_file
-#
-#  (boolean value)
-#cinder_api_insecure = false
-
-#
-# The address where the cinder authentication service is listening.
-#
-# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, and ``cinder_store_password`` options are
-# specified, the specified values are always used for the authentication.
-# This is useful to hide the image volumes from users by storing them in a
-# project/tenant specific to the image service. It also enables users to share
-# the image volume among other projects under the control of glance's ACL.
-#
-# If either of these options are not set, the cinder endpoint is looked up
-# from the service catalog, and current context's user and project are used.
-#
-# Possible values:
-#     * A valid authentication service address, for example:
-#       ``http://openstack.example.org/identity/v2.0``
-#
-# Related options:
-#     * cinder_store_user_name
-#     * cinder_store_password
-#     * cinder_store_project_name
-#
-#  (string value)
-#cinder_store_auth_address = <None>
-
-#
-# User name to authenticate against cinder.
-#
-# This must be used with all the following related options. If any of these are
-# not specified, the user of the current context is used.
-#
-# Possible values:
-#     * A valid user name
-#
-# Related options:
-#     * cinder_store_auth_address
-#     * cinder_store_password
-#     * cinder_store_project_name
-#
-#  (string value)
-#cinder_store_user_name = <None>
-
-#
-# Password for the user authenticating against cinder.
-#
-# This must be used with all the following related options. If any of these are
-# not specified, the user of the current context is used.
-#
-# Possible values:
-#     * A valid password for the user specified by ``cinder_store_user_name``
-#
-# Related options:
-#     * cinder_store_auth_address
-#     * cinder_store_user_name
-#     * cinder_store_project_name
-#
-#  (string value)
-#cinder_store_password = <None>
-
-#
-# Project name where the image volume is stored in cinder.
-#
-# If this configuration option is not set, the project in current context is
-# used.
-#
-# This must be used with all the following related options. If any of these are
-# not specified, the project of the current context is used.
-#
-# Possible values:
-#     * A valid project name
-#
-# Related options:
-#     * ``cinder_store_auth_address``
-#     * ``cinder_store_user_name``
-#     * ``cinder_store_password``
-#
-#  (string value)
-#cinder_store_project_name = <None>
-
-#
-# Path to the rootwrap configuration file to use for running commands as root.
-#
-# The cinder store requires root privileges to operate the image volumes (for
-# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
-# The configuration file should allow the required commands by cinder store and
-# os-brick library.
-#
-# Possible values:
-#     * Path to the rootwrap config file
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#rootwrap_config = /etc/glance/rootwrap.conf
-
-#
-# Volume type that will be used for volume creation in cinder.
-#
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
-# in cinder that can be optimized for images.
-#
-# If this is not set, then the default volume type specified in the cinder
-# configuration will be used for volume creation.
-#
-# Possible values:
-#     * A valid volume type from cinder
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#cinder_volume_type = <None>
+#control_exchange = keystone
+
 
 
 [cors]
-
-#
-# From oslo.middleware.cors
+#
+# From oslo.middleware
 #
 
 # Indicate whether this resource may be shared with the domain received in the
 # requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
 # slash. Example: https://horizon.example.com (list value)
 #allowed_origin = <None>
+allowed_origin = https://100.64.200.101
 
 # Indicate that the actual request can include user credentials (boolean value)
 #allow_credentials = true
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -2063,15 +1667,13 @@
 # Indicate which methods can be used during the actual request. (list value)
 #allow_methods = GET,PUT,POST,DELETE,PATCH
 
-# Indicate which header field names may be used during the actual request. (list
-# value)
-#allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
 
 
 [database]
-connection = sqlite:////var/lib/glance/glance.sqlite
-backend = sqlalchemy
-
 #
 # From oslo.db
 #
@@ -2089,14 +1691,14 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://glance:opnfv_secret@192.168.10.23/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
@@ -2113,9 +1715,10 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 # This option is deprecated for removal.
@@ -2124,17 +1727,19 @@
 # sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -2145,6 +1750,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -2161,8 +1767,8 @@
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
@@ -2184,1220 +1790,9 @@
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
-
-
-[file]
-
-#
-# From glance.multi_store
-#
-
-#
-# Directory to which the filesystem backend store writes images.
-#
-# Upon start up, Glance creates the directory if it doesn't already
-# exist and verifies write access to the user under which
-# ``glance-api`` runs. If the write access isn't available, a
-# ``BadStoreConfiguration`` exception is raised and the filesystem
-# store may not be available for adding new images.
-#
-# NOTE: This directory is used only when filesystem store is used as a
-# storage backend. Either ``filesystem_store_datadir`` or
-# ``filesystem_store_datadirs`` option must be specified in
-# ``glance-api.conf``. If both options are specified, a
-# ``BadStoreConfiguration`` will be raised and the filesystem store
-# may not be available for adding new images.
-#
-# Possible values:
-#     * A valid path to a directory
-#
-# Related options:
-#     * ``filesystem_store_datadirs``
-#     * ``filesystem_store_file_perm``
-#
-#  (string value)
-#filesystem_store_datadir = /var/lib/glance/images
-
-#
-# List of directories and their priorities to which the filesystem
-# backend store writes images.
-#
-# The filesystem store can be configured to store images in multiple
-# directories as opposed to using a single directory specified by the
-# ``filesystem_store_datadir`` configuration option. When using
-# multiple directories, each directory can be given an optional
-# priority to specify the preference order in which they should
-# be used. Priority is an integer that is concatenated to the
-# directory path with a colon where a higher value indicates higher
-# priority. When two directories have the same priority, the directory
-# with most free space is used. When no priority is specified, it
-# defaults to zero.
-#
-# More information on configuring filesystem store with multiple store
-# directories can be found at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
-#
-# NOTE: This directory is used only when filesystem store is used as a
-# storage backend. Either ``filesystem_store_datadir`` or
-# ``filesystem_store_datadirs`` option must be specified in
-# ``glance-api.conf``. If both options are specified, a
-# ``BadStoreConfiguration`` will be raised and the filesystem store
-# may not be available for adding new images.
-#
-# Possible values:
-#     * List of strings of the following form:
-#         * ``<a valid directory path>:<optional integer priority>``
-#
-# Related options:
-#     * ``filesystem_store_datadir``
-#     * ``filesystem_store_file_perm``
-#
-#  (multi valued)
-#filesystem_store_datadirs =
-
-#
-# Filesystem store metadata file.
-#
-# The path to a file which contains the metadata to be returned with
-# any location associated with the filesystem store. The file must
-# contain a valid JSON object. The object should contain the keys
-# ``id`` and ``mountpoint``. The value for both keys should be a
-# string.
-#
-# Possible values:
-#     * A valid path to the store metadata file
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#filesystem_store_metadata_file = <None>
-
-#
-# File access permissions for the image files.
-#
-# Set the intended file access permissions for image data. This provides
-# a way to enable other services, e.g. Nova, to consume images directly
-# from the filesystem store. The users running the services that are
-# intended to be given access to could be made a member of the group
-# that owns the files created. Assigning a value less then or equal to
-# zero for this configuration option signifies that no changes be made
-# to the  default permissions. This value will be decoded as an octal
-# digit.
-#
-# For more information, please refer the documentation at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
-#
-# Possible values:
-#     * A valid file access permission
-#     * Zero
-#     * Any negative integer
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#filesystem_store_file_perm = 0
-
-#
-# Chunk size, in bytes.
-#
-# The chunk size used when reading or writing image files. Raising this value
-# may improve the throughput but it may also slightly increase the memory usage
-# when handling a large number of requests.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#filesystem_store_chunk_size = 65536
-
-
-[glance.store.http.store]
-
-#
-# From glance.multi_store
-#
-
-#
-# Path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Certificate Authority file to verify the remote server certificate. If
-# this option is set, the ``https_insecure`` option will be ignored and
-# the CA file specified will be used to authenticate the server
-# certificate and establish a secure connection to the server.
-#
-# Possible values:
-#     * A valid path to a CA file
-#
-# Related options:
-#     * https_insecure
-#
-#  (string value)
-#https_ca_certificates_file = <None>
-
-#
-# Set verification of the remote server certificate.
-#
-# This configuration option takes in a boolean value to determine
-# whether or not to verify the remote server certificate. If set to
-# True, the remote server certificate is not verified. If the option is
-# set to False, then the default CA truststore is used for verification.
-#
-# This option is ignored if ``https_ca_certificates_file`` is set.
-# The remote server certificate will then be verified using the file
-# specified using the ``https_ca_certificates_file`` option.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * https_ca_certificates_file
-#
-#  (boolean value)
-#https_insecure = true
-
-#
-# The http/https proxy information to be used to connect to the remote
-# server.
-#
-# This configuration option specifies the http/https proxy information
-# that should be used to connect to the remote server. The proxy
-# information should be a key value pair of the scheme and proxy, for
-# example, http:10.0.0.1:3128. You can also specify proxies for multiple
-# schemes by separating the key value pairs with a comma, for example,
-# http:10.0.0.1:3128, https:10.0.0.1:1080.
-#
-# Possible values:
-#     * A comma separated list of scheme:proxy pairs as described above
-#
-# Related options:
-#     * None
-#
-#  (dict value)
-#http_proxy_information =
-
-
-[glance.store.rbd.store]
-
-#
-# From glance.multi_store
-#
-
-#
-# Size, in megabytes, to chunk RADOS images into.
-#
-# Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
-# performance, the value should be a power of two.
-#
-# When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
-# size set using this option. These chunked objects are then stored
-# across the distributed block data store to use for Glance.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#rbd_store_chunk_size = 8
-
-#
-# RADOS pool in which images are stored.
-#
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
-# of images) into a ``pool``. Each pool is defined with the number of
-# placement groups it can contain. The default pool that is used is
-# 'images'.
-#
-# More information on the RBD storage backend can be found here:
-# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
-#
-# Possible Values:
-#     * A valid pool name
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#rbd_store_pool = images
-
-#
-# RADOS user to authenticate as.
-#
-# This configuration option takes in the RADOS user to authenticate as.
-# This is only needed when RADOS authentication is enabled and is
-# applicable only if the user is using Cephx authentication. If the
-# value for this option is not set by the user or is set to None, a
-# default value will be chosen, which will be based on the client.
-# section in rbd_store_ceph_conf.
-#
-# Possible Values:
-#     * A valid RADOS user
-#
-# Related options:
-#     * rbd_store_ceph_conf
-#
-#  (string value)
-#rbd_store_user = <None>
-
-#
-# Ceph configuration file path.
-#
-# This configuration option takes in the path to the Ceph configuration
-# file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
-# which is located at /etc/ceph/ceph.conf. If using Cephx
-# authentication, this file should include a reference to the right
-# keyring in a client.<USER> section
-#
-# Possible Values:
-#     * A valid path to a configuration file
-#
-# Related options:
-#     * rbd_store_user
-#
-#  (string value)
-#rbd_store_ceph_conf = /etc/ceph/ceph.conf
-
-#
-# Timeout value for connecting to Ceph cluster.
-#
-# This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
-# glance-api before closing the connection. This prevents glance-api
-# hangups during the connection to RBD. If the value for this option
-# is set to less than or equal to 0, no timeout is set and the default
-# librados value is used.
-#
-# Possible Values:
-#     * Any integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#rados_connect_timeout = 0
-
-
-[glance.store.sheepdog.store]
-
-#
-# From glance.multi_store
-#
-
-#
-# Chunk size for images to be stored in Sheepdog data store.
-#
-# Provide an integer value representing the size in mebibyte
-# (1048576 bytes) to chunk Glance images into. The default
-# chunk size is 64 mebibytes.
-#
-# When using Sheepdog distributed storage system, the images are
-# chunked into objects of this size and then stored across the
-# distributed data store to use for Glance.
-#
-# Chunk sizes, if a power of two, help avoid fragmentation and
-# enable improved performance.
-#
-# Possible values:
-#     * Positive integer value representing size in mebibytes.
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#sheepdog_store_chunk_size = 64
-
-#
-# Port number on which the sheep daemon will listen.
-#
-# Provide an integer value representing a valid port number on
-# which you want the Sheepdog daemon to listen on. The default
-# port is 7000.
-#
-# The Sheepdog daemon, also called 'sheep', manages the storage
-# in the distributed cluster by writing objects across the storage
-# network. It identifies and acts on the messages it receives on
-# the port number set using ``sheepdog_store_port`` option to store
-# chunks of Glance images.
-#
-# Possible values:
-#     * A valid port number (0 to 65535)
-#
-# Related Options:
-#     * sheepdog_store_address
-#
-#  (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#sheepdog_store_port = 7000
-
-#
-# Address to bind the Sheepdog daemon to.
-#
-# Provide a string value representing the address to bind the
-# Sheepdog daemon to. The default address set for the 'sheep'
-# is 127.0.0.1.
-#
-# The Sheepdog daemon, also called 'sheep', manages the storage
-# in the distributed cluster by writing objects across the storage
-# network. It identifies and acts on the messages directed to the
-# address set using ``sheepdog_store_address`` option to store
-# chunks of Glance images.
-#
-# Possible values:
-#     * A valid IPv4 address
-#     * A valid IPv6 address
-#     * A valid hostname
-#
-# Related Options:
-#     * sheepdog_store_port
-#
-#  (host address value)
-#sheepdog_store_address = 127.0.0.1
-
-
-[glance.store.swift.store]
-
-#
-# From glance.multi_store
-#
-
-#
-# Set verification of the server certificate.
-#
-# This boolean determines whether or not to verify the server
-# certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
-# to False, then the default CA truststore is used for verification.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_cacert
-#
-#  (boolean value)
-#swift_store_auth_insecure = false
-
-#
-# Path to the CA bundle file.
-#
-# This configuration option enables the operator to specify the path to
-# a custom Certificate Authority file for SSL verification when
-# connecting to Swift.
-#
-# Possible values:
-#     * A valid path to a CA file
-#
-# Related options:
-#     * swift_store_auth_insecure
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The region of Swift endpoint to use by Glance.
-#
-# Provide a string value representing a Swift region where Glance
-# can connect to for image storage. By default, there is no region
-# set.
-#
-# When Glance uses Swift as the storage backend to store images
-# for a specific tenant that has multiple endpoints, setting of a
-# Swift region with ``swift_store_region`` allows Glance to connect
-# to Swift in the specified region as opposed to a single region
-# connectivity.
-#
-# This option can be configured for both single-tenant and
-# multi-tenant storage.
-#
-# NOTE: Setting the region with ``swift_store_region`` is
-# tenant-specific and is necessary ``only if`` the tenant has
-# multiple endpoints across different regions.
-#
-# Possible values:
-#     * A string value representing a valid Swift region.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#swift_store_region = RegionTwo
-
-#
-# The URL endpoint to use for Swift backend storage.
-#
-# Provide a string value representing the URL endpoint to use for
-# storing Glance images in Swift store. By default, an endpoint
-# is not set and the storage URL returned by ``auth`` is used.
-# Setting an endpoint with ``swift_store_endpoint`` overrides the
-# storage URL and is used for Glance image storage.
-#
-# NOTE: The URL should include the path up to, but excluding the
-# container. The location of an object is obtained by appending
-# the container and object to the configured URL.
-#
-# Possible values:
-#     * String value representing a valid URL path up to a Swift container
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
-
-#
-# Endpoint Type of Swift service.
-#
-# This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
-# 1.
-#
-# Possible values:
-#     * publicURL
-#     * adminURL
-#     * internalURL
-#
-# Related options:
-#     * swift_store_endpoint
-#
-#  (string value)
-# Possible values:
-# publicURL - <No description provided>
-# adminURL - <No description provided>
-# internalURL - <No description provided>
-#swift_store_endpoint_type = publicURL
-
-#
-# Type of Swift service to use.
-#
-# Provide a string value representing the service type to use for
-# storing images while using Swift backend storage. The default
-# service type is set to ``object-store``.
-#
-# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
-# this configuration option needs to be ``object-store``. If using
-# a higher version of Keystone or a different auth scheme, this
-# option may be modified.
-#
-# Possible values:
-#     * A string representing a valid service type for Swift storage.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_service_type = object-store
-
-#
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
-# will be the name prefix for all containers. Usage of single/multiple
-# containers can be controlled using the configuration option
-# ``swift_store_multiple_containers_seed``.
-#
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
-# as the suffix delimited by an underscore (where N is specified by
-# ``swift_store_multiple_containers_seed``).
-#
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
-# when N=10 the container name would be ``glance_fdae39a1-ba.``
-#
-# Possible values:
-#     * If using single container, this configuration option can be any string
-#       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
-#       taken into account as well.
-#
-# Related options:
-#     * ``swift_store_multiple_containers_seed``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (string value)
-#swift_store_container = glance
-
-#
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
-# For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
-# driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
-# enforced by the Swift cluster in consideration.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by the Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_chunk_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_size = 5120
-
-#
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
-# bigger than the size specified by this configuration option.
-# Refer to ``swift_store_large_object_size`` for more detail.
-#
-# For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
-# the seventh segment will be 0.2GB.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_chunk_size = 200
-
-#
-# Create container, if it doesn't already exist, when uploading image.
-#
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
-# and multiple containers mode.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * None
-#
-#  (boolean value)
-#swift_store_create_container_on_put = false
-
-#
-# Store images in tenant's Swift account.
-#
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
-# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
-#
-# NOTE: If using multi-tenant swift store, please make sure
-# that you do not set a swift configuration file with the
-# 'swift_store_config_file' option.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_config_file
-#
-#  (boolean value)
-#swift_store_multi_tenant = false
-
-#
-# Seed indicating the number of containers to use for storing images.
-#
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
-# will be used to store images.
-#
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
-#
-# NOTE: This is used only when swift_store_multi_tenant is disabled.
-#
-# Possible values:
-#     * A non-negative integer less than or equal to 32
-#
-# Related options:
-#     * ``swift_store_container``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (integer value)
-# Minimum value: 0
-# Maximum value: 32
-#swift_store_multiple_containers_seed = 0
-
-#
-# List of tenants that will be granted admin access.
-#
-# This is a list of tenants that will be granted read/write access on
-# all Swift containers created by Glance in multi-tenant mode. The
-# default value is an empty list.
-#
-# Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
-#       projects/tenants
-#
-# Related options:
-#     * None
-#
-#  (list value)
-#swift_store_admin_tenants =
-
-#
-# SSL layer compression for HTTPS Swift requests.
-#
-# Provide a boolean value to determine whether or not to compress
-# HTTPS Swift requests for images at the SSL layer. By default,
-# compression is enabled.
-#
-# When using Swift as the backend store for Glance image storage,
-# SSL layer compression of HTTPS Swift requests can be set using
-# this option. If set to False, SSL layer compression of HTTPS
-# Swift requests is disabled. Disabling this option may improve
-# performance for images which are already in a compressed format,
-# for example, qcow2.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related Options:
-#     * None
-#
-#  (boolean value)
-#swift_store_ssl_compression = true
-
-#
-# The number of times a Swift download will be retried before the
-# request fails.
-#
-# Provide an integer value representing the number of times an image
-# download must be retried before erroring out. The default value is
-# zero (no retry on a failed image download). When set to a positive
-# integer value, ``swift_store_retry_get_count`` ensures that the
-# download is attempted this many more times upon a download failure
-# before sending an error message.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_retry_get_count = 0
-
-#
-# Time in seconds defining the size of the window in which a new
-# token may be requested before the current token is due to expire.
-#
-# Typically, the Swift storage driver fetches a new token upon the
-# expiration of the current token to ensure continued access to
-# Swift. However, some Swift transactions (like uploading image
-# segments) may not recover well if the token expires on the fly.
-#
-# Hence, by fetching a new token before the current token expiration,
-# we make sure that the token does not expire or is close to expiry
-# before a transaction is attempted. By default, the Swift storage
-# driver requests for a new token 60 seconds or less before the
-# current token expiration.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_expire_soon_interval = 60
-
-#
-# Use trusts for multi-tenant Swift store.
-#
-# This option instructs the Swift store to create a trust for each
-# add/get request when the multi-tenant store is in use. Using trusts
-# allows the Swift store to avoid problems that can be caused by an
-# authentication token expiring during the upload or download of data.
-#
-# By default, ``swift_store_use_trusts`` is set to ``True``(use of
-# trusts is enabled). If set to ``False``, a user token is used for
-# the Swift connection instead, eliminating the overhead of trust
-# creation.
-#
-# NOTE: This option is considered only when
-# ``swift_store_multi_tenant`` is set to ``True``
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (boolean value)
-#swift_store_use_trusts = true
-
-#
-# Buffer image segments before upload to Swift.
-#
-# Provide a boolean value to indicate whether or not Glance should
-# buffer image data to disk while uploading to swift. This enables
-# Glance to resume uploads on error.
-#
-# NOTES:
-# When enabling this option, one should take great care as this
-# increases disk usage on the API node. Be aware that depending
-# upon how the file system is configured, the disk space used
-# for buffering may decrease the actual disk space available for
-# the glance image cache.  Disk utilization will cap according to
-# the following equation:
-# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_upload_buffer_dir
-#
-#  (boolean value)
-#swift_buffer_on_upload = false
-
-#
-# Reference to default Swift account/backing store parameters.
-#
-# Provide a string value representing a reference to the default set
-# of parameters required for using swift account/backing store for
-# image storage. The default reference value for this configuration
-# option is 'ref1'. This configuration option dereferences the
-# parameters and facilitates image storage in Swift storage backend
-# every time a new image is added.
-#
-# Possible values:
-#     * A valid string value
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#default_swift_reference = ref1
-
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_version = 2
-
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_address = <None>
-
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
-#swift_store_user = <None>
-
-# DEPRECATED: Auth key for the user authenticating against the Swift
-# authentication service. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'key' in the Swift back-end configuration file is used
-# to set the authentication key instead.
-#swift_store_key = <None>
-
-#
-# Absolute path to the file containing the swift account(s)
-# configurations.
-#
-# Include a string value representing the path to a configuration
-# file that has references for each of the configured Swift
-# account(s)/backing stores. By default, no file path is specified
-# and customized Swift referencing is disabled. Configuring this
-# option is highly recommended while using Swift storage backend for
-# image storage as it avoids storage of credentials in the database.
-#
-# NOTE: Please do not configure this option if you have set
-# ``swift_store_multi_tenant`` to ``True``.
-#
-# Possible values:
-#     * String value representing an absolute path on the glance-api
-#       node
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (string value)
-#swift_store_config_file = <None>
-
-#
-# Directory to buffer image segments before upload to Swift.
-#
-# Provide a string value representing the absolute path to the
-# directory on the glance node where image segments will be
-# buffered briefly before they are uploaded to swift.
-#
-# NOTES:
-# * This is required only when the configuration option
-#   ``swift_buffer_on_upload`` is set to True.
-# * This directory should be provisioned keeping in mind the
-#   ``swift_store_large_object_chunk_size`` and the maximum
-#   number of images that could be uploaded simultaneously by
-#   a given glance node.
-#
-# Possible values:
-#     * String value representing an absolute directory path
-#
-# Related options:
-#     * swift_buffer_on_upload
-#     * swift_store_large_object_chunk_size
-#
-#  (string value)
-#swift_upload_buffer_dir = <None>
-
-
-[glance.store.vmware_datastore.store]
-
-#
-# From glance.multi_store
-#
-
-#
-# Address of the ESX/ESXi or vCenter Server target system.
-#
-# This configuration option sets the address of the ESX/ESXi or vCenter
-# Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
-# a DNS name (www.my-domain.com).
-#
-# Possible Values:
-#     * A valid IPv4 or IPv6 address
-#     * A valid DNS name
-#
-# Related options:
-#     * vmware_server_username
-#     * vmware_server_password
-#
-#  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_host = 127.0.0.1
-
-#
-# Server username.
-#
-# This configuration option takes the username for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is the username for a user with appropriate
-#       privileges
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_password
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_username = root
-
-#
-# Server password.
-#
-# This configuration option takes the password for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is a password corresponding to the username
-#       specified using the "vmware_server_username" option
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_username
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_password = vmware
-
-#
-# The number of VMware API retries.
-#
-# This configuration option specifies the number of times the VMware
-# ESX/VC server API must be retried upon connection related issues or
-# server API call overload. It is not possible to specify 'retry
-# forever'.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_api_retry_count = 10
-
-#
-# Interval in seconds used for polling remote tasks invoked on VMware
-# ESX/VC server.
-#
-# This configuration option takes in the sleep time in seconds for polling an
-# on-going async task as part of the VMWare ESX/VC server API call.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_task_poll_interval = 5
-
-#
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
-# glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
-# is openstack_glance.
-#
-# Possible Values:
-#     * Any string that is a valid path to a directory
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#vmware_store_image_dir = /openstack_glance
-
-#
-# Set verification of the ESX/vCenter server certificate.
-#
-# This configuration option takes a boolean value to determine
-# whether or not to verify the ESX/vCenter server certificate. If this
-# option is set to True, the ESX/vCenter server certificate is not
-# verified. If this option is set to False, then the default CA
-# truststore is used for verification.
-#
-# This option is ignored if the "vmware_ca_file" option is set. In that
-# case, the ESX/vCenter server certificate will then be verified using
-# the file specified using the "vmware_ca_file" option .
-#
-# Possible Values:
-#     * True
-#     * False
-#
-# Related options:
-#     * vmware_ca_file
-#
-#  (boolean value)
-# Deprecated group/name - [glance.store.vmware_datastore.store]/vmware_api_insecure
-#vmware_insecure = false
-
-#
-# Absolute path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Cerificate Authority File to verify the ESX/vCenter certificate.
-#
-# If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
-# server certificate and establish a secure connection to the server.
-#
-# Possible Values:
-#     * Any string that is a valid absolute path to a CA file
-#
-# Related options:
-#     * vmware_insecure
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The datastores where the image can be stored.
-#
-# This configuration option specifies the datastores where the image can
-# be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
-# should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
-# by ":" to specify the priority. Thus, the required format becomes
-# <datacenter_path>:<datastore_name>:<optional_weight>.
-#
-# When adding an image, the datastore with highest weight will be
-# selected, unless there is not enough free space available in cases
-# where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
-# last. If multiple datastores have the same weight, then the one with
-# the most free space available is selected.
-#
-# Possible Values:
-#     * Any string of the format:
-#       <datacenter_path>:<datastore_name>:<optional_weight>
-#
-# Related options:
-#    * None
-#
-#  (multi valued)
-#vmware_datastores =
 
 
 [glance_store]
-
-#
-# From glance.multi_store
-#
-
-#
-# The default scheme to use for storing images.
-#
-# Provide a string value representing the default scheme to use for
-# storing images. If not set, Glance API service will fail to start.
-#
-# Related Options:
-#     * enabled_backends
-#
-#  (string value)
-#default_backend = <None>
-
-# DEPRECATED:
-# Minimum interval in seconds to execute updating dynamic storage
-# capabilities based on current backend status.
-#
-# Provide an integer value representing time in seconds to set the
-# minimum interval before an update of dynamic storage capabilities
-# for a storage backend can be attempted. Setting
-# ``store_capabilities_update_min_interval`` does not mean updates
-# occur periodically based on the set interval. Rather, the update
-# is performed at the elapse of this interval set, if an operation
-# of the store is triggered.
-#
-# By default, this option is set to zero and is disabled. Provide an
-# integer value greater than zero to enable this option.
-#
-# NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-
-# specs/specs/kilo/store-capabilities.html
-#
-# For more information on setting up a particular store in your
-# deployment and help with the usage of this feature, please contact
-# the storage driver maintainers listed here:
-# https://docs.openstack.org/glance_store/latest/user/drivers.html
-#
-# NOTE 2: The dynamic store update capability described above is not
-# implemented by any current store drivers.  Thus, this option DOES
-# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
-# for removal early in the Stein development cycle.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option configures a stub method that has not been implemented
-# for any existing store drivers.  Hence it is non-operational, and
-# giving it a value does absolutely nothing.
-#
-# This option is scheduled for removal early in the Stein development
-# cycle.
-#store_capabilities_update_min_interval = 0
 
 #
 # From glance.store
@@ -3431,9 +1826,9 @@
 # ``enabled_backends`` which helps to configure multiple backend stores
 # of different schemes.
 #
-# This option is scheduled for removal in the Train development
+# This option is scheduled for removal in the Stein development
 # cycle.
-#stores = file,http
+stores = file,http
 
 # DEPRECATED:
 # The default scheme to use for storing images.
@@ -3484,9 +1879,9 @@
 # ``default_backend`` which acts similar to ``default_store`` config
 # option.
 #
-# This option is scheduled for removal in the Train development
+# This option is scheduled for removal in the Stein development
 # cycle.
-#default_store = file
+default_store = file
 
 # DEPRECATED:
 # Minimum interval in seconds to execute updating dynamic storage
@@ -3504,8 +1899,8 @@
 # integer value greater than zero to enable this option.
 #
 # NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-
-# specs/specs/kilo/store-capabilities.html
+# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
+# /store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
@@ -3564,7 +1959,7 @@
 #     * cinder_store_password
 #
 #  (string value)
-#cinder_catalog_info = volumev2::publicURL
+cinder_catalog_info = volumev2::internalURL
 
 #
 # Override service catalog lookup with template for cinder endpoint.
@@ -3609,6 +2004,9 @@
 #  (string value)
 # Deprecated group/name - [glance_store]/os_region_name
 #cinder_os_region_name = <None>
+
+cinder_os_region_name = RegionOne
+
 
 #
 # Location of a CA certificates file used for cinder client requests.
@@ -3819,7 +2217,7 @@
 #     * ``filesystem_store_file_perm``
 #
 #  (string value)
-#filesystem_store_datadir = /var/lib/glance/images
+filesystem_store_datadir = /var/lib/glance/images
 
 #
 # List of directories and their priorities to which the filesystem
@@ -3903,23 +2301,6 @@
 #filesystem_store_file_perm = 0
 
 #
-# Chunk size, in bytes.
-#
-# The chunk size used when reading or writing image files. Raising this value
-# may improve the throughput but it may also slightly increase the memory usage
-# when handling a large number of requests.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#filesystem_store_chunk_size = 65536
-
-#
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
@@ -3980,106 +2361,6 @@
 #http_proxy_information =
 
 #
-# Size, in megabytes, to chunk RADOS images into.
-#
-# Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
-# performance, the value should be a power of two.
-#
-# When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
-# size set using this option. These chunked objects are then stored
-# across the distributed block data store to use for Glance.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#rbd_store_chunk_size = 8
-
-#
-# RADOS pool in which images are stored.
-#
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
-# of images) into a ``pool``. Each pool is defined with the number of
-# placement groups it can contain. The default pool that is used is
-# 'images'.
-#
-# More information on the RBD storage backend can be found here:
-# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
-#
-# Possible Values:
-#     * A valid pool name
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#rbd_store_pool = images
-
-#
-# RADOS user to authenticate as.
-#
-# This configuration option takes in the RADOS user to authenticate as.
-# This is only needed when RADOS authentication is enabled and is
-# applicable only if the user is using Cephx authentication. If the
-# value for this option is not set by the user or is set to None, a
-# default value will be chosen, which will be based on the client.
-# section in rbd_store_ceph_conf.
-#
-# Possible Values:
-#     * A valid RADOS user
-#
-# Related options:
-#     * rbd_store_ceph_conf
-#
-#  (string value)
-#rbd_store_user = <None>
-
-#
-# Ceph configuration file path.
-#
-# This configuration option takes in the path to the Ceph configuration
-# file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
-# which is located at /etc/ceph/ceph.conf. If using Cephx
-# authentication, this file should include a reference to the right
-# keyring in a client.<USER> section
-#
-# Possible Values:
-#     * A valid path to a configuration file
-#
-# Related options:
-#     * rbd_store_user
-#
-#  (string value)
-#rbd_store_ceph_conf = /etc/ceph/ceph.conf
-
-#
-# Timeout value for connecting to Ceph cluster.
-#
-# This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
-# glance-api before closing the connection. This prevents glance-api
-# hangups during the connection to RBD. If the value for this option
-# is set to less than or equal to 0, no timeout is set and the default
-# librados value is used.
-#
-# Possible Values:
-#     * Any integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#rados_connect_timeout = 0
-
-#
 # Chunk size for images to be stored in Sheepdog data store.
 #
 # Provide an integer value representing the size in mebibyte
@@ -4151,746 +2432,6 @@
 #  (host address value)
 #sheepdog_store_address = 127.0.0.1
 
-#
-# Set verification of the server certificate.
-#
-# This boolean determines whether or not to verify the server
-# certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
-# to False, then the default CA truststore is used for verification.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_cacert
-#
-#  (boolean value)
-#swift_store_auth_insecure = false
-
-#
-# Path to the CA bundle file.
-#
-# This configuration option enables the operator to specify the path to
-# a custom Certificate Authority file for SSL verification when
-# connecting to Swift.
-#
-# Possible values:
-#     * A valid path to a CA file
-#
-# Related options:
-#     * swift_store_auth_insecure
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The region of Swift endpoint to use by Glance.
-#
-# Provide a string value representing a Swift region where Glance
-# can connect to for image storage. By default, there is no region
-# set.
-#
-# When Glance uses Swift as the storage backend to store images
-# for a specific tenant that has multiple endpoints, setting of a
-# Swift region with ``swift_store_region`` allows Glance to connect
-# to Swift in the specified region as opposed to a single region
-# connectivity.
-#
-# This option can be configured for both single-tenant and
-# multi-tenant storage.
-#
-# NOTE: Setting the region with ``swift_store_region`` is
-# tenant-specific and is necessary ``only if`` the tenant has
-# multiple endpoints across different regions.
-#
-# Possible values:
-#     * A string value representing a valid Swift region.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#swift_store_region = RegionTwo
-
-#
-# The URL endpoint to use for Swift backend storage.
-#
-# Provide a string value representing the URL endpoint to use for
-# storing Glance images in Swift store. By default, an endpoint
-# is not set and the storage URL returned by ``auth`` is used.
-# Setting an endpoint with ``swift_store_endpoint`` overrides the
-# storage URL and is used for Glance image storage.
-#
-# NOTE: The URL should include the path up to, but excluding the
-# container. The location of an object is obtained by appending
-# the container and object to the configured URL.
-#
-# Possible values:
-#     * String value representing a valid URL path up to a Swift container
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
-
-#
-# Endpoint Type of Swift service.
-#
-# This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
-# 1.
-#
-# Possible values:
-#     * publicURL
-#     * adminURL
-#     * internalURL
-#
-# Related options:
-#     * swift_store_endpoint
-#
-#  (string value)
-# Possible values:
-# publicURL - <No description provided>
-# adminURL - <No description provided>
-# internalURL - <No description provided>
-#swift_store_endpoint_type = publicURL
-
-#
-# Type of Swift service to use.
-#
-# Provide a string value representing the service type to use for
-# storing images while using Swift backend storage. The default
-# service type is set to ``object-store``.
-#
-# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
-# this configuration option needs to be ``object-store``. If using
-# a higher version of Keystone or a different auth scheme, this
-# option may be modified.
-#
-# Possible values:
-#     * A string representing a valid service type for Swift storage.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_service_type = object-store
-
-#
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
-# will be the name prefix for all containers. Usage of single/multiple
-# containers can be controlled using the configuration option
-# ``swift_store_multiple_containers_seed``.
-#
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
-# as the suffix delimited by an underscore (where N is specified by
-# ``swift_store_multiple_containers_seed``).
-#
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
-# when N=10 the container name would be ``glance_fdae39a1-ba.``
-#
-# Possible values:
-#     * If using single container, this configuration option can be any string
-#       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
-#       taken into account as well.
-#
-# Related options:
-#     * ``swift_store_multiple_containers_seed``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (string value)
-#swift_store_container = glance
-
-#
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
-# For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
-# driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
-# enforced by the Swift cluster in consideration.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by the Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_chunk_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_size = 5120
-
-#
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
-# bigger than the size specified by this configuration option.
-# Refer to ``swift_store_large_object_size`` for more detail.
-#
-# For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
-# the seventh segment will be 0.2GB.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_chunk_size = 200
-
-#
-# Create container, if it doesn't already exist, when uploading image.
-#
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
-# and multiple containers mode.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * None
-#
-#  (boolean value)
-#swift_store_create_container_on_put = false
-
-#
-# Store images in tenant's Swift account.
-#
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
-# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
-#
-# NOTE: If using multi-tenant swift store, please make sure
-# that you do not set a swift configuration file with the
-# 'swift_store_config_file' option.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_config_file
-#
-#  (boolean value)
-#swift_store_multi_tenant = false
-
-#
-# Seed indicating the number of containers to use for storing images.
-#
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
-# will be used to store images.
-#
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
-#
-# NOTE: This is used only when swift_store_multi_tenant is disabled.
-#
-# Possible values:
-#     * A non-negative integer less than or equal to 32
-#
-# Related options:
-#     * ``swift_store_container``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (integer value)
-# Minimum value: 0
-# Maximum value: 32
-#swift_store_multiple_containers_seed = 0
-
-#
-# List of tenants that will be granted admin access.
-#
-# This is a list of tenants that will be granted read/write access on
-# all Swift containers created by Glance in multi-tenant mode. The
-# default value is an empty list.
-#
-# Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
-#       projects/tenants
-#
-# Related options:
-#     * None
-#
-#  (list value)
-#swift_store_admin_tenants =
-
-#
-# SSL layer compression for HTTPS Swift requests.
-#
-# Provide a boolean value to determine whether or not to compress
-# HTTPS Swift requests for images at the SSL layer. By default,
-# compression is enabled.
-#
-# When using Swift as the backend store for Glance image storage,
-# SSL layer compression of HTTPS Swift requests can be set using
-# this option. If set to False, SSL layer compression of HTTPS
-# Swift requests is disabled. Disabling this option may improve
-# performance for images which are already in a compressed format,
-# for example, qcow2.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related Options:
-#     * None
-#
-#  (boolean value)
-#swift_store_ssl_compression = true
-
-#
-# The number of times a Swift download will be retried before the
-# request fails.
-#
-# Provide an integer value representing the number of times an image
-# download must be retried before erroring out. The default value is
-# zero (no retry on a failed image download). When set to a positive
-# integer value, ``swift_store_retry_get_count`` ensures that the
-# download is attempted this many more times upon a download failure
-# before sending an error message.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_retry_get_count = 0
-
-#
-# Time in seconds defining the size of the window in which a new
-# token may be requested before the current token is due to expire.
-#
-# Typically, the Swift storage driver fetches a new token upon the
-# expiration of the current token to ensure continued access to
-# Swift. However, some Swift transactions (like uploading image
-# segments) may not recover well if the token expires on the fly.
-#
-# Hence, by fetching a new token before the current token expiration,
-# we make sure that the token does not expire or is close to expiry
-# before a transaction is attempted. By default, the Swift storage
-# driver requests for a new token 60 seconds or less before the
-# current token expiration.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_expire_soon_interval = 60
-
-#
-# Use trusts for multi-tenant Swift store.
-#
-# This option instructs the Swift store to create a trust for each
-# add/get request when the multi-tenant store is in use. Using trusts
-# allows the Swift store to avoid problems that can be caused by an
-# authentication token expiring during the upload or download of data.
-#
-# By default, ``swift_store_use_trusts`` is set to ``True``(use of
-# trusts is enabled). If set to ``False``, a user token is used for
-# the Swift connection instead, eliminating the overhead of trust
-# creation.
-#
-# NOTE: This option is considered only when
-# ``swift_store_multi_tenant`` is set to ``True``
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (boolean value)
-#swift_store_use_trusts = true
-
-#
-# Buffer image segments before upload to Swift.
-#
-# Provide a boolean value to indicate whether or not Glance should
-# buffer image data to disk while uploading to swift. This enables
-# Glance to resume uploads on error.
-#
-# NOTES:
-# When enabling this option, one should take great care as this
-# increases disk usage on the API node. Be aware that depending
-# upon how the file system is configured, the disk space used
-# for buffering may decrease the actual disk space available for
-# the glance image cache.  Disk utilization will cap according to
-# the following equation:
-# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_upload_buffer_dir
-#
-#  (boolean value)
-#swift_buffer_on_upload = false
-
-#
-# Reference to default Swift account/backing store parameters.
-#
-# Provide a string value representing a reference to the default set
-# of parameters required for using swift account/backing store for
-# image storage. The default reference value for this configuration
-# option is 'ref1'. This configuration option dereferences the
-# parameters and facilitates image storage in Swift storage backend
-# every time a new image is added.
-#
-# Possible values:
-#     * A valid string value
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#default_swift_reference = ref1
-
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_version = 2
-
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_address = <None>
-
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
-#swift_store_user = <None>
-
-# DEPRECATED: Auth key for the user authenticating against the Swift
-# authentication service. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'key' in the Swift back-end configuration file is used
-# to set the authentication key instead.
-#swift_store_key = <None>
-
-#
-# Absolute path to the file containing the swift account(s)
-# configurations.
-#
-# Include a string value representing the path to a configuration
-# file that has references for each of the configured Swift
-# account(s)/backing stores. By default, no file path is specified
-# and customized Swift referencing is disabled. Configuring this
-# option is highly recommended while using Swift storage backend for
-# image storage as it avoids storage of credentials in the database.
-#
-# NOTE: Please do not configure this option if you have set
-# ``swift_store_multi_tenant`` to ``True``.
-#
-# Possible values:
-#     * String value representing an absolute path on the glance-api
-#       node
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (string value)
-#swift_store_config_file = <None>
-
-#
-# Directory to buffer image segments before upload to Swift.
-#
-# Provide a string value representing the absolute path to the
-# directory on the glance node where image segments will be
-# buffered briefly before they are uploaded to swift.
-#
-# NOTES:
-# * This is required only when the configuration option
-#   ``swift_buffer_on_upload`` is set to True.
-# * This directory should be provisioned keeping in mind the
-#   ``swift_store_large_object_chunk_size`` and the maximum
-#   number of images that could be uploaded simultaneously by
-#   a given glance node.
-#
-# Possible values:
-#     * String value representing an absolute directory path
-#
-# Related options:
-#     * swift_buffer_on_upload
-#     * swift_store_large_object_chunk_size
-#
-#  (string value)
-#swift_upload_buffer_dir = <None>
-
-#
-# Address of the ESX/ESXi or vCenter Server target system.
-#
-# This configuration option sets the address of the ESX/ESXi or vCenter
-# Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
-# a DNS name (www.my-domain.com).
-#
-# Possible Values:
-#     * A valid IPv4 or IPv6 address
-#     * A valid DNS name
-#
-# Related options:
-#     * vmware_server_username
-#     * vmware_server_password
-#
-#  (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_host = 127.0.0.1
-
-#
-# Server username.
-#
-# This configuration option takes the username for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is the username for a user with appropriate
-#       privileges
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_password
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_username = root
-
-#
-# Server password.
-#
-# This configuration option takes the password for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is a password corresponding to the username
-#       specified using the "vmware_server_username" option
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_username
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_server_password = vmware
-
-#
-# The number of VMware API retries.
-#
-# This configuration option specifies the number of times the VMware
-# ESX/VC server API must be retried upon connection related issues or
-# server API call overload. It is not possible to specify 'retry
-# forever'.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_api_retry_count = 10
-
-#
-# Interval in seconds used for polling remote tasks invoked on VMware
-# ESX/VC server.
-#
-# This configuration option takes in the sleep time in seconds for polling an
-# on-going async task as part of the VMWare ESX/VC server API call.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_task_poll_interval = 5
-
-#
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
-# glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
-# is openstack_glance.
-#
-# Possible Values:
-#     * Any string that is a valid path to a directory
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#vmware_store_image_dir = /openstack_glance
-
-#
-# Set verification of the ESX/vCenter server certificate.
-#
-# This configuration option takes a boolean value to determine
-# whether or not to verify the ESX/vCenter server certificate. If this
-# option is set to True, the ESX/vCenter server certificate is not
-# verified. If this option is set to False, then the default CA
-# truststore is used for verification.
-#
-# This option is ignored if the "vmware_ca_file" option is set. In that
-# case, the ESX/vCenter server certificate will then be verified using
-# the file specified using the "vmware_ca_file" option .
-#
-# Possible Values:
-#     * True
-#     * False
-#
-# Related options:
-#     * vmware_ca_file
-#
-#  (boolean value)
-# Deprecated group/name - [glance_store]/vmware_api_insecure
-#vmware_insecure = false
-
-#
-# Absolute path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Cerificate Authority File to verify the ESX/vCenter certificate.
-#
-# If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
-# server certificate and establish a secure connection to the server.
-#
-# Possible Values:
-#     * Any string that is a valid absolute path to a CA file
-#
-# Related options:
-#     * vmware_insecure
-#
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The datastores where the image can be stored.
-#
-# This configuration option specifies the datastores where the image can
-# be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
-# should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
-# by ":" to specify the priority. Thus, the required format becomes
-# <datacenter_path>:<datastore_name>:<optional_weight>.
-#
-# When adding an image, the datastore with highest weight will be
-# selected, unless there is not enough free space available in cases
-# where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
-# last. If multiple datastores have the same weight, then the one with
-# the most free space available is selected.
-#
-# Possible Values:
-#     * Any string of the format:
-#       <datacenter_path>:<datastore_name>:<optional_weight>
-#
-# Related options:
-#    * None
-#
-#  (multi valued)
-#vmware_datastores =
-
 
 [image_format]
 
@@ -4904,7 +2445,7 @@
 
 # Supported values for the 'disk_format' image attribute (list value)
 # Deprecated group/name - [DEFAULT]/disk_formats
-disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop.root-tar
+#disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop
 
 
 [keystone_authtoken]
@@ -4914,14 +2455,16 @@
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -4934,9 +2477,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -4949,8 +2493,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -4974,10 +2518,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -4987,33 +2532,29 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 
 # In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -5039,12 +2580,20 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
 # value)
-#enforce_token_bind = permissive
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
 
 # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
 # single algorithm or multiple. The algorithms are those supported by Python
@@ -5062,43 +2611,181 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = glance
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
 
 [oslo_concurrency]
 
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory should
-# only be writable by the user running the processes that need locking. Defaults
-# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
-# path must be set. (string value)
-#lock_path = <None>
-
 
 [oslo_messaging_amqp]
-
 #
 # From oslo.messaging
 #
@@ -5118,14 +2805,16 @@
 # value)
 #ssl = false
 
-# CA certificate PEM file used to verify the server's certificate (string value)
+# CA certificate PEM file used to verify the server's certificate (string
+# value)
 #ssl_ca_file =
 
-# Self-identifying certificate PEM file for client authentication (string value)
+# Self-identifying certificate PEM file for client authentication (string
+# value)
 #ssl_cert_file =
 
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
+# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# (string value)
 #ssl_key_file =
 
 # Password for decrypting ssl_key_file (if encrypted) (string value)
@@ -5139,6 +2828,12 @@
 # virtual host name instead of the DNS name. (boolean value)
 #ssl_verify_vhost = false
 
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
 # Space separated list of acceptable SASL mechanisms (string value)
 #sasl_mechanisms =
 
@@ -5150,6 +2845,20 @@
 
 # SASL realm to use if no realm present in username (string value)
 #sasl_default_realm =
+
+# DEPRECATED: User name for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# username.
+#username =
+
+# DEPRECATED: Password for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# password.
+#password =
 
 # Seconds to pause before attempting to re-connect. (integer value)
 # Minimum value: 1
@@ -5235,8 +2944,8 @@
 #unicast_address = unicast
 
 # Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
+# the message bus to identify messages that should be delivered in a round-
+# robin fashion across consumers. (string value)
 #anycast_address = anycast
 
 # Exchange name used in notification addresses.
@@ -5246,6 +2955,7 @@
 # else control_exchange if set
 # else 'notify' (string value)
 #default_notification_exchange = <None>
+default_notification_exchange = glance
 
 # Exchange name used in RPC addresses.
 # Exchange name resolution precedence:
@@ -5280,81 +2990,147 @@
 #pre_settled = rpc-cast
 #pre_settled = rpc-reply
 
-
-[oslo_messaging_kafka]
-
+[oslo_messaging_rabbit]
 #
 # From oslo.messaging
 #
 
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Connect over SSL. (boolean value)
+# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
+#ssl = false
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
 # value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
 # value)
+# Minimum value: 0
+# Maximum value: 65535
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
 # value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
 
 
 [oslo_messaging_notifications]
-
 #
 # From oslo.messaging
 #
 
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver=messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -5372,134 +3148,46 @@
 #retry = -1
 
 
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
-#heartbeat_rate = 2
-
-
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
 
 
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is compared
+# to the ``scope_types`` of the policy being enforced. If the scopes do not
+# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
+# will be logged informing operators that policies are being invoked with
+# mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
+policy_file = /etc/glance/policy.json
 
 # Default rule. Enforced when a requested rule is not found. (string value)
 #policy_default_rule = default
@@ -5531,6 +3219,7 @@
 #remote_ssl_client_key_file = <None>
 
 
+
 [paste_deploy]
 
 #
@@ -5556,11 +3245,7 @@
 #     * config_file
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#flavor = keystone
+flavor = keystone
 
 #
 # Name of the paste configuration file.
@@ -5592,10 +3277,6 @@
 #     * flavor
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #config_file = glance-api-paste.ini
 
 
@@ -5810,10 +3491,6 @@
 #     * None
 #
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #work_dir = /work_dir
 
 
@@ -5901,8 +3578,126 @@
 # qcow2 - <No description provided>
 # raw - <No description provided>
 # vmdk - <No description provided>
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #conversion_format = raw
+
+
+[barbican]
+#
+# From castellan.config
+#
+
+# Use this endpoint to connect to Barbican, for example:
+# "http://localhost:9311/" (string value)
+#barbican_endpoint = <None>
+barbican_endpoint = http://192.168.10.35:9311
+
+# Version of the Barbican API, for example: "v1" (string value)
+#barbican_api_version = <None>
+
+# Use this endpoint to connect to Keystone (string value)
+# Deprecated group/name - [key_manager]/auth_url
+#auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://192.168.10.35:35357/v3
+
+# Number of seconds to wait before retrying poll for key creation completion
+# (integer value)
+#retry_delay = 1
+
+# Number of times to retry poll for key creation completion (integer value)
+#number_of_retries = 60
+
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
+#verify_ssl = true
+
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
+# admin (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+#barbican_endpoint_type = public
+barbican_endpoint_type = internal
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+

2020-01-15 02:27:59,648 [salt.state       :1951][INFO    ][16766] Completed state [/etc/glance/glance-api.conf] at time 02:27:59.648566 duration_in_ms=860.849
2020-01-15 02:27:59,649 [salt.state       :1780][INFO    ][16766] Running state [/etc/glance/glance-api-paste.ini] at time 02:27:59.649480
2020-01-15 02:27:59,649 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/etc/glance/glance-api-paste.ini]
2020-01-15 02:27:59,675 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/files/stein/glance-api-paste.ini'
2020-01-15 02:27:59,746 [salt.state       :300 ][INFO    ][16766] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 # Use this pipeline for no auth or image caching - DEFAULT
 [pipeline:glance-api]
 pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler unauthenticated-context rootapp
@@ -12,7 +13,7 @@
 
 # Use this pipeline for keystone auth
 [pipeline:glance-api-keystone]
-pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context  rootapp
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context rootapp
 
 # Use this pipeline for keystone auth with image caching
 [pipeline:glance-api-keystone+caching]

2020-01-15 02:27:59,747 [salt.state       :1951][INFO    ][16766] Completed state [/etc/glance/glance-api-paste.ini] at time 02:27:59.747325 duration_in_ms=97.844
2020-01-15 02:27:59,748 [salt.state       :1780][INFO    ][16766] Running state [/var/log/glance/api.log] at time 02:27:59.748416
2020-01-15 02:27:59,748 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/var/log/glance/api.log]
2020-01-15 02:28:00,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['git', '--version'] in directory '/root'
2020-01-15 02:28:01,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command 'test -f /var/log/glance/api.log' in directory '/root'
2020-01-15 02:28:01,332 [salt.state       :300 ][INFO    ][16766] onlyif execution failed
2020-01-15 02:28:01,332 [salt.state       :1951][INFO    ][16766] Completed state [/var/log/glance/api.log] at time 02:28:01.332772 duration_in_ms=1584.351
2020-01-15 02:28:01,334 [salt.state       :1780][INFO    ][16766] Running state [glance-manage db_sync] at time 02:28:01.334836
2020-01-15 02:28:01,335 [salt.state       :1813][INFO    ][16766] Executing state cmd.run for [glance-manage db_sync]
2020-01-15 02:28:01,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command 'glance-manage db_sync' as user 'glance' in directory '/var/lib/glance'
2020-01-15 02:28:06,316 [salt.state       :300 ][INFO    ][16766] {'pid': 18545, 'retcode': 0, 'stderr': "/usr/lib/python3/dist-packages/oslo_db/sqlalchemy/enginefacade.py:1371: OsloDBDeprecationWarning: EngineFacade is deprecated; please use oslo_db.sqlalchemy.enginefacade\n  expire_on_commit=expire_on_commit, _conf=conf)\n2020-01-15 02:28:03.233 18547 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2020-01-15 02:28:03.234 18547 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m\n2020-01-15 02:28:03.256 18547 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2020-01-15 02:28:03.256 18547 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> liberty, liberty initial\nINFO  [alembic.runtime.migration] Running upgrade liberty -> mitaka01, add index on created_at and updated_at columns of 'images' table\nINFO  [alembic.runtime.migration] Running upgrade mitaka01 -> mitaka02, update metadef os_nova_server\nINFO  [alembic.runtime.migration] Running upgrade mitaka02 -> ocata_expand01, add visibility to images\nINFO  [alembic.runtime.migration] Running upgrade ocata_expand01 -> pike_expand01, empty expand for symmetry with pike_contract01\nINFO  [alembic.runtime.migration] Running upgrade pike_expand01 -> queens_expand01\nINFO  [alembic.runtime.migration] Running upgrade queens_expand01 -> rocky_expand01, add os_hidden column to images table\nINFO  [alembic.runtime.migration] Running upgrade rocky_expand01 -> rocky_expand02, add os_hash_algo and os_hash_value columns to images table\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade mitaka02 -> ocata_contract01, remove is_public from images\nINFO  [alembic.runtime.migration] Running upgrade ocata_contract01 -> pike_contract01, drop glare artifacts tables\nINFO  [alembic.runtime.migration] Running upgrade pike_contract01 -> queens_contract01\nINFO  [alembic.runtime.migration] Running upgrade queens_contract01 -> rocky_contract01\nINFO  [alembic.runtime.migration] Running upgrade rocky_contract01 -> rocky_contract02\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.", 'stdout': 'Upgraded database to: rocky_expand02, current revision(s): rocky_expand02\nDatabase migration is up to date. No migration needed.\nUpgraded database to: rocky_contract02, current revision(s): rocky_contract02\nDatabase is synced successfully.'}
2020-01-15 02:28:06,317 [salt.state       :1951][INFO    ][16766] Completed state [glance-manage db_sync] at time 02:28:06.317274 duration_in_ms=4982.437
2020-01-15 02:28:06,319 [salt.state       :1780][INFO    ][16766] Running state [glance-manage db_load_metadefs] at time 02:28:06.319333
2020-01-15 02:28:06,319 [salt.state       :1813][INFO    ][16766] Executing state cmd.run for [glance-manage db_load_metadefs]
2020-01-15 02:28:06,321 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command 'glance-manage db_load_metadefs' as user 'glance' in directory '/var/lib/glance'
2020-01-15 02:28:13,631 [salt.state       :300 ][INFO    ][16766] {'pid': 18572, 'retcode': 0, 'stderr': "/usr/lib/python3/dist-packages/oslo_db/sqlalchemy/enginefacade.py:1371: OsloDBDeprecationWarning: EngineFacade is deprecated; please use oslo_db.sqlalchemy.enginefacade\n  expire_on_commit=expire_on_commit, _conf=conf)\n2020-01-15 02:28:08.456 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware-flavor.json loaded to database.\x1b[00m\n2020-01-15 02:28:08.692 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-host-capabilities.json loaded to database.\x1b[00m\n2020-01-15 02:28:08.976 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-libvirt-image.json loaded to database.\x1b[00m\n2020-01-15 02:28:09.127 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-guest-memory-backing.json loaded to database.\x1b[00m\n2020-01-15 02:28:09.255 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-watchdog.json loaded to database.\x1b[00m\n2020-01-15 02:28:09.331 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-guest-shutdown.json loaded to database.\x1b[00m\n2020-01-15 02:28:09.442 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-randomgen.json loaded to database.\x1b[00m\n2020-01-15 02:28:09.578 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/image-signature-verification.json loaded to database.\x1b[00m\n2020-01-15 02:28:09.677 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-xenapi.json loaded to database.\x1b[00m\n2020-01-15 02:28:09.754 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-num-instances.json loaded to database.\x1b[00m\n2020-01-15 02:28:10.183 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-databases.json loaded to database.\x1b[00m\n2020-01-15 02:28:10.302 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-quota.json loaded to database.\x1b[00m\n2020-01-15 02:28:10.527 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vcputopology.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.020 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-resource-allocation-setting-data.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.099 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-iops-filter.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.226 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-instance-data.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.374 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/glance-common-image-props.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.537 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.615 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/storage-volume-type.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.761 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/operating-system.json loaded to database.\x1b[00m\n2020-01-15 02:28:11.837 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-aggr-disk-filter.json loaded to database.\x1b[00m\n2020-01-15 02:28:12.254 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-virtual-system-setting-data.json loaded to database.\x1b[00m\n2020-01-15 02:28:12.381 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-libvirt.json loaded to database.\x1b[00m\n2020-01-15 02:28:12.382 18573 ERROR glance.db.sqlalchemy.metadata [-] Failed to parse json file /etc/glance/metadefs/compute-trust.json while populating metadata due to: 'ascii' codec can't decode byte 0xc2 in position 90: ordinal not in range(128): UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 90: ordinal not in range(128)\x1b[00m\n2020-01-15 02:28:12.752 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-storage-allocation-setting-data.json loaded to database.\x1b[00m\n2020-01-15 02:28:12.927 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/software-webservers.json loaded to database.\x1b[00m\n2020-01-15 02:28:13.080 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-cpu-pinning.json loaded to database.\x1b[00m\n2020-01-15 02:28:13.177 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/compute-vmware-quota-flavor.json loaded to database.\x1b[00m\n2020-01-15 02:28:13.178 18573 ERROR glance.db.sqlalchemy.metadata [-] Failed to parse json file /etc/glance/metadefs/software-runtimes.json while populating metadata due to: 'ascii' codec can't decode byte 0xe2 in position 1367: ordinal not in range(128): UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1367: ordinal not in range(128)\x1b[00m\n2020-01-15 02:28:13.405 18573 INFO glance.db.sqlalchemy.metadata [-] File /etc/glance/metadefs/cim-processor-allocation-setting-data.json loaded to database.\x1b[00m\n2020-01-15 02:28:13.406 18573 ERROR glance.db.sqlalchemy.metadata [-] Failed to parse json file /etc/glance/metadefs/compute-hypervisor.json while populating metadata due to: 'ascii' codec can't decode byte 0xc2 in position 987: ordinal not in range(128): UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 987: ordinal not in range(128)\x1b[00m\n2020-01-15 02:28:13.407 18573 INFO glance.db.sqlalchemy.metadata [-] Metadata loading finished\x1b[00m", 'stdout': ''}
2020-01-15 02:28:13,633 [salt.state       :1951][INFO    ][16766] Completed state [glance-manage db_load_metadefs] at time 02:28:13.632817 duration_in_ms=7313.482
2020-01-15 02:28:13,635 [salt.state       :1780][INFO    ][16766] Running state [/etc/default/glance-api] at time 02:28:13.635461
2020-01-15 02:28:13,636 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/etc/default/glance-api]
2020-01-15 02:28:13,676 [salt.fileclient  :1219][INFO    ][16766] Fetching file from saltenv 'base', ** done ** 'glance/files/default'
2020-01-15 02:28:13,707 [salt.state       :300 ][INFO    ][16766] File changed:
New file
2020-01-15 02:28:13,708 [salt.state       :1951][INFO    ][16766] Completed state [/etc/default/glance-api] at time 02:28:13.708462 duration_in_ms=73.001
2020-01-15 02:28:13,709 [salt.state       :1780][INFO    ][16766] Running state [/etc/default/glance-glare] at time 02:28:13.709781
2020-01-15 02:28:13,710 [salt.state       :1813][INFO    ][16766] Executing state file.managed for [/etc/default/glance-glare]
2020-01-15 02:28:13,752 [salt.state       :300 ][INFO    ][16766] File changed:
New file
2020-01-15 02:28:13,753 [salt.state       :1951][INFO    ][16766] Completed state [/etc/default/glance-glare] at time 02:28:13.753228 duration_in_ms=43.446
2020-01-15 02:28:13,757 [salt.state       :1780][INFO    ][16766] Running state [glance-api] at time 02:28:13.757228
2020-01-15 02:28:13,758 [salt.state       :1813][INFO    ][16766] Executing state service.running for [glance-api]
2020-01-15 02:28:13,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['systemctl', 'status', 'glance-api.service', '-n', '0'] in directory '/root'
2020-01-15 02:28:13,810 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2020-01-15 02:28:13,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['systemctl', 'is-enabled', 'glance-api.service'] in directory '/root'
2020-01-15 02:28:13,893 [salt.state       :300 ][INFO    ][16766] The service glance-api is already running
2020-01-15 02:28:13,894 [salt.state       :1951][INFO    ][16766] Completed state [glance-api] at time 02:28:13.894405 duration_in_ms=137.178
2020-01-15 02:28:13,895 [salt.state       :1780][INFO    ][16766] Running state [glance-api] at time 02:28:13.895427
2020-01-15 02:28:13,896 [salt.state       :1813][INFO    ][16766] Executing state service.mod_watch for [glance-api]
2020-01-15 02:28:13,899 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2020-01-15 02:28:13,939 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'glance-api.service'] in directory '/root'
2020-01-15 02:28:14,014 [salt.state       :300 ][INFO    ][16766] {'glance-api': True}
2020-01-15 02:28:14,015 [salt.state       :1951][INFO    ][16766] Completed state [glance-api] at time 02:28:14.015140 duration_in_ms=119.712
2020-01-15 02:28:14,018 [salt.state       :1780][INFO    ][16766] Running state [glance-cache-pruner] at time 02:28:14.018255
2020-01-15 02:28:14,019 [salt.state       :1813][INFO    ][16766] Executing state cron.present for [glance-cache-pruner]
2020-01-15 02:28:14,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command 'crontab -u glance -l' in directory '/root'
2020-01-15 02:28:14,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command 'crontab -u glance /tmp/__salt.tmp.ecxt31' in directory '/root'
2020-01-15 02:28:14,106 [salt.state       :300 ][INFO    ][16766] {'glance': 'glance-cache-pruner'}
2020-01-15 02:28:14,107 [salt.state       :1951][INFO    ][16766] Completed state [glance-cache-pruner] at time 02:28:14.107572 duration_in_ms=89.316
2020-01-15 02:28:14,109 [salt.state       :1780][INFO    ][16766] Running state [glance-cache-cleaner] at time 02:28:14.109660
2020-01-15 02:28:14,110 [salt.state       :1813][INFO    ][16766] Executing state cron.present for [glance-cache-cleaner]
2020-01-15 02:28:14,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command 'crontab -u glance -l' in directory '/root'
2020-01-15 02:28:14,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][16766] Executing command 'crontab -u glance /tmp/__salt.tmp.hXmFya' in directory '/root'
2020-01-15 02:28:14,179 [salt.state       :300 ][INFO    ][16766] {'glance': 'glance-cache-cleaner'}
2020-01-15 02:28:14,180 [salt.state       :1951][INFO    ][16766] Completed state [glance-cache-cleaner] at time 02:28:14.180141 duration_in_ms=70.482
2020-01-15 02:28:14,181 [salt.state       :1780][INFO    ][16766] Running state [/srv/glance] at time 02:28:14.181054
2020-01-15 02:28:14,181 [salt.state       :1813][INFO    ][16766] Executing state file.directory for [/srv/glance]
2020-01-15 02:28:14,184 [salt.state       :300 ][INFO    ][16766] {'/srv/glance': 'New Dir'}
2020-01-15 02:28:14,184 [salt.state       :1951][INFO    ][16766] Completed state [/srv/glance] at time 02:28:14.184460 duration_in_ms=3.406
2020-01-15 02:28:14,185 [salt.state       :1780][INFO    ][16766] Running state [/var/lib/glance/images] at time 02:28:14.184962
2020-01-15 02:28:14,185 [salt.state       :1813][INFO    ][16766] Executing state file.directory for [/var/lib/glance/images]
2020-01-15 02:28:14,188 [salt.state       :300 ][INFO    ][16766] Directory /var/lib/glance/images is in the correct state
Directory /var/lib/glance/images updated
2020-01-15 02:28:14,189 [salt.state       :1951][INFO    ][16766] Completed state [/var/lib/glance/images] at time 02:28:14.189183 duration_in_ms=4.221
2020-01-15 02:28:14,193 [salt.minion      :1711][INFO    ][16766] Returning information for job: 20200115022710238777
2020-01-15 02:29:08,723 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115022908713395
2020-01-15 02:29:08,761 [salt.minion      :1432][INFO    ][18656] Starting a new job with PID 18656
2020-01-15 02:29:15,894 [salt.state       :915 ][INFO    ][18656] Loading fresh modules for state activity
2020-01-15 02:29:16,021 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/init.sls'
2020-01-15 02:29:16,089 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/controller.sls'
2020-01-15 02:29:17,287 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/db/offline_sync.sls'
2020-01-15 02:29:17,578 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/db/online_sync.sls'
2020-01-15 02:29:17,746 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/_ssl/mysql.sls'
2020-01-15 02:29:17,941 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/_ssl/rabbitmq.sls'
2020-01-15 02:29:18,499 [keyring.backend  :170 ][INFO    ][18656] Loading Windows (alt)
2020-01-15 02:29:18,512 [keyring.backend  :170 ][INFO    ][18656] Loading pyfs
2020-01-15 02:29:18,513 [keyring.backend  :170 ][INFO    ][18656] Loading multi
2020-01-15 02:29:18,514 [keyring.backend  :170 ][INFO    ][18656] Loading Google
2020-01-15 02:29:18,515 [keyring.backend  :170 ][INFO    ][18656] Loading Gnome
2020-01-15 02:29:18,522 [keyring.backend  :170 ][INFO    ][18656] Loading keyczar
2020-01-15 02:29:18,522 [keyring.backend  :170 ][INFO    ][18656] Loading file
2020-01-15 02:29:19,465 [salt.state       :1780][INFO    ][18656] Running state [apache2] at time 02:29:19.465065
2020-01-15 02:29:19,465 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [apache2]
2020-01-15 02:29:19,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:29:20,504 [salt.state       :300 ][INFO    ][18656] All specified packages are already installed
2020-01-15 02:29:20,505 [salt.state       :1951][INFO    ][18656] Completed state [apache2] at time 02:29:20.505400 duration_in_ms=1040.338
2020-01-15 02:29:20,505 [salt.state       :1780][INFO    ][18656] Running state [openssl] at time 02:29:20.505820
2020-01-15 02:29:20,506 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [openssl]
2020-01-15 02:29:20,515 [salt.state       :300 ][INFO    ][18656] All specified packages are already installed
2020-01-15 02:29:20,515 [salt.state       :1951][INFO    ][18656] Completed state [openssl] at time 02:29:20.515621 duration_in_ms=9.801
2020-01-15 02:29:20,516 [salt.state       :1780][INFO    ][18656] Running state [a2enmod ssl] at time 02:29:20.516760
2020-01-15 02:29:20,517 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [a2enmod ssl]
2020-01-15 02:29:20,517 [salt.state       :300 ][INFO    ][18656] /etc/apache2/mods-enabled/ssl.load exists
2020-01-15 02:29:20,518 [salt.state       :1951][INFO    ][18656] Completed state [a2enmod ssl] at time 02:29:20.518151 duration_in_ms=1.391
2020-01-15 02:29:20,518 [salt.state       :1780][INFO    ][18656] Running state [a2enmod rewrite] at time 02:29:20.518826
2020-01-15 02:29:20,519 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [a2enmod rewrite]
2020-01-15 02:29:20,519 [salt.state       :300 ][INFO    ][18656] /etc/apache2/mods-enabled/rewrite.load exists
2020-01-15 02:29:20,519 [salt.state       :1951][INFO    ][18656] Completed state [a2enmod rewrite] at time 02:29:20.519750 duration_in_ms=0.924
2020-01-15 02:29:20,520 [salt.state       :1780][INFO    ][18656] Running state [libapache2-mod-wsgi-py3] at time 02:29:20.520447
2020-01-15 02:29:20,520 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [libapache2-mod-wsgi-py3]
2020-01-15 02:29:20,529 [salt.state       :300 ][INFO    ][18656] All specified packages are already installed
2020-01-15 02:29:20,530 [salt.state       :1951][INFO    ][18656] Completed state [libapache2-mod-wsgi-py3] at time 02:29:20.530095 duration_in_ms=9.648
2020-01-15 02:29:20,530 [salt.state       :1780][INFO    ][18656] Running state [a2enmod wsgi] at time 02:29:20.530766
2020-01-15 02:29:20,531 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [a2enmod wsgi]
2020-01-15 02:29:20,531 [salt.state       :300 ][INFO    ][18656] /etc/apache2/mods-enabled/wsgi.load exists
2020-01-15 02:29:20,531 [salt.state       :1951][INFO    ][18656] Completed state [a2enmod wsgi] at time 02:29:20.531676 duration_in_ms=0.91
2020-01-15 02:29:20,536 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:29:20.536490
2020-01-15 02:29:20,536 [salt.state       :1813][INFO    ][18656] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2020-01-15 02:29:20,537 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2020-01-15 02:29:20,537 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:29:20.537503 duration_in_ms=1.013
2020-01-15 02:29:20,537 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:29:20.537805
2020-01-15 02:29:20,538 [salt.state       :1813][INFO    ][18656] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2020-01-15 02:29:20,538 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2020-01-15 02:29:20,538 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:29:20.538689 duration_in_ms=0.884
2020-01-15 02:29:20,539 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:29:20.538985
2020-01-15 02:29:20,539 [salt.state       :1813][INFO    ][18656] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2020-01-15 02:29:20,539 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2020-01-15 02:29:20,539 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:29:20.539821 duration_in_ms=0.836
2020-01-15 02:29:20,540 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:29:20.540092
2020-01-15 02:29:20,540 [salt.state       :1813][INFO    ][18656] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2020-01-15 02:29:20,540 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2020-01-15 02:29:20,541 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:29:20.540960 duration_in_ms=0.867
2020-01-15 02:29:20,544 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 02:29:20.543979
2020-01-15 02:29:20,544 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2020-01-15 02:29:20,622 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2020-01-15 02:29:20,622 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 02:29:20.622669 duration_in_ms=78.69
2020-01-15 02:29:20,624 [salt.state       :1780][INFO    ][18656] Running state [a2enmod mpm_event] at time 02:29:20.623975
2020-01-15 02:29:20,624 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [a2enmod mpm_event]
2020-01-15 02:29:20,624 [salt.state       :300 ][INFO    ][18656] /etc/apache2/mods-enabled/mpm_event.load exists
2020-01-15 02:29:20,624 [salt.state       :1951][INFO    ][18656] Completed state [a2enmod mpm_event] at time 02:29:20.624929 duration_in_ms=0.954
2020-01-15 02:29:20,625 [salt.state       :1780][INFO    ][18656] Running state [apache_server_service_task] at time 02:29:20.625876
2020-01-15 02:29:20,626 [salt.state       :1813][INFO    ][18656] Executing state test.show_notification for [apache_server_service_task]
2020-01-15 02:29:20,626 [salt.state       :300 ][INFO    ][18656] Running apache.server.service
2020-01-15 02:29:20,626 [salt.state       :1951][INFO    ][18656] Completed state [apache_server_service_task] at time 02:29:20.626679 duration_in_ms=0.803
2020-01-15 02:29:20,627 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/ports.conf] at time 02:29:20.627327
2020-01-15 02:29:20,627 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/apache2/ports.conf]
2020-01-15 02:29:20,711 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/ports.conf is in the correct state
2020-01-15 02:29:20,711 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/ports.conf] at time 02:29:20.711688 duration_in_ms=84.36
2020-01-15 02:29:20,712 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/conf-available/security.conf] at time 02:29:20.712488
2020-01-15 02:29:20,712 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2020-01-15 02:29:20,799 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/conf-available/security.conf is in the correct state
2020-01-15 02:29:20,799 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/conf-available/security.conf] at time 02:29:20.799616 duration_in_ms=87.127
2020-01-15 02:29:20,818 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 02:29:20.817985
2020-01-15 02:29:20,818 [salt.state       :1813][INFO    ][18656] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2020-01-15 02:29:20,818 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/sites-enabled/000-default.conf is not present
2020-01-15 02:29:20,819 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 02:29:20.819260 duration_in_ms=1.276
2020-01-15 02:29:20,820 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:29:20.820230
2020-01-15 02:29:20,820 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2020-01-15 02:29:21,198 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2020-01-15 02:29:21,199 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:29:21.199040 duration_in_ms=378.809
2020-01-15 02:29:21,200 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:29:21.200198
2020-01-15 02:29:21,200 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2020-01-15 02:29:21,636 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2020-01-15 02:29:21,637 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:29:21.637136 duration_in_ms=436.936
2020-01-15 02:29:21,638 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:29:21.638483
2020-01-15 02:29:21,639 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2020-01-15 02:29:22,079 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2020-01-15 02:29:22,079 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:29:22.079781 duration_in_ms=441.299
2020-01-15 02:29:22,080 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:29:22.080629
2020-01-15 02:29:22,081 [salt.state       :1813][INFO    ][18656] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2020-01-15 02:29:22,083 [salt.state       :300 ][INFO    ][18656] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2020-01-15 02:29:22,083 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:29:22.083811 duration_in_ms=3.182
2020-01-15 02:29:22,088 [salt.state       :1780][INFO    ][18656] Running state [apache2] at time 02:29:22.088903
2020-01-15 02:29:22,089 [salt.state       :1813][INFO    ][18656] Executing state service.running for [apache2]
2020-01-15 02:29:22,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2020-01-15 02:29:22,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:29:22,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:29:22,244 [salt.state       :300 ][INFO    ][18656] The service apache2 is already running
2020-01-15 02:29:22,245 [salt.state       :1951][INFO    ][18656] Completed state [apache2] at time 02:29:22.245018 duration_in_ms=156.115
2020-01-15 02:29:22,248 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/conf-enabled/security.conf] at time 02:29:22.248121
2020-01-15 02:29:22,249 [salt.state       :1813][INFO    ][18656] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2020-01-15 02:29:22,253 [salt.state       :300 ][INFO    ][18656] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2020-01-15 02:29:22,254 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/conf-enabled/security.conf] at time 02:29:22.254204 duration_in_ms=6.083
2020-01-15 02:29:22,254 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:29:22.254863
2020-01-15 02:29:22,255 [salt.state       :1813][INFO    ][18656] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2020-01-15 02:29:22,256 [salt.state       :300 ][INFO    ][18656] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2020-01-15 02:29:22,256 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:29:22.256765 duration_in_ms=1.901
2020-01-15 02:29:22,267 [salt.state       :1780][INFO    ][18656] Running state [debconf-utils] at time 02:29:22.267155
2020-01-15 02:29:22,268 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [debconf-utils]
2020-01-15 02:29:22,294 [salt.state       :300 ][INFO    ][18656] All specified packages are already installed
2020-01-15 02:29:22,294 [salt.state       :1951][INFO    ][18656] Completed state [debconf-utils] at time 02:29:22.294537 duration_in_ms=27.381
2020-01-15 02:29:22,295 [salt.state       :1780][INFO    ][18656] Running state [nova-consoleproxy] at time 02:29:22.295837
2020-01-15 02:29:22,296 [salt.state       :1813][INFO    ][18656] Executing state debconf.set for [nova-consoleproxy]
2020-01-15 02:29:22,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'debconf-get-selections' in directory '/root'
2020-01-15 02:29:22,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'debconf-set-selections /tmp/salt-7ZIL3y' in directory '/root'
2020-01-15 02:29:22,876 [salt.state       :300 ][INFO    ][18656] {'nova-consoleproxy/daemon_type': 'novnc'}
2020-01-15 02:29:22,878 [salt.state       :1951][INFO    ][18656] Completed state [nova-consoleproxy] at time 02:29:22.878015 duration_in_ms=582.178
2020-01-15 02:29:22,887 [salt.state       :1780][INFO    ][18656] Running state [nova] at time 02:29:22.886914
2020-01-15 02:29:22,887 [salt.state       :1813][INFO    ][18656] Executing state group.present for [nova]
2020-01-15 02:29:22,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['groupadd', '-g 303', '-r', 'nova'] in directory '/root'
2020-01-15 02:29:22,937 [salt.state       :300 ][INFO    ][18656] {'passwd': 'x', 'gid': 303, 'name': 'nova', 'members': []}
2020-01-15 02:29:22,939 [salt.state       :1951][INFO    ][18656] Completed state [nova] at time 02:29:22.939108 duration_in_ms=52.194
2020-01-15 02:29:22,941 [salt.state       :1780][INFO    ][18656] Running state [nova] at time 02:29:22.941751
2020-01-15 02:29:22,942 [salt.state       :1813][INFO    ][18656] Executing state user.present for [nova]
2020-01-15 02:29:22,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['useradd', '-s', '/bin/false', '-u', '303', '-g', '303', '-m', '-d', '/var/lib/nova', '-r', 'nova'] in directory '/root'
2020-01-15 02:29:23,023 [salt.state       :300 ][INFO    ][18656] {'shell': '/bin/false', 'workphone': '', 'uid': 303, 'passwd': 'x', 'roomnumber': '', 'groups': ['nova'], 'home': '/var/lib/nova', 'name': 'nova', 'gid': 303, 'fullname': '', 'homephone': ''}
2020-01-15 02:29:23,025 [salt.state       :1951][INFO    ][18656] Completed state [nova] at time 02:29:23.024926 duration_in_ms=83.175
2020-01-15 02:29:23,028 [salt.state       :1780][INFO    ][18656] Running state [nova-api] at time 02:29:23.028370
2020-01-15 02:29:23,029 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [nova-api]
2020-01-15 02:29:23,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['apt-cache', '-q', 'policy', 'nova-api'] in directory '/root'
2020-01-15 02:29:23,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:29:23,845 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022923830574
2020-01-15 02:29:23,888 [salt.minion      :1432][INFO    ][18742] Starting a new job with PID 18742
2020-01-15 02:29:23,959 [salt.minion      :1711][INFO    ][18742] Returning information for job: 20200115022923830574
2020-01-15 02:29:28,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:29:28,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-api'] in directory '/root'
2020-01-15 02:29:54,013 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115022953991938
2020-01-15 02:29:54,057 [salt.minion      :1432][INFO    ][20660] Starting a new job with PID 20660
2020-01-15 02:29:54,116 [salt.minion      :1711][INFO    ][20660] Returning information for job: 20200115022953991938
2020-01-15 02:30:24,206 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023024188146
2020-01-15 02:30:24,240 [salt.minion      :1432][INFO    ][21735] Starting a new job with PID 21735
2020-01-15 02:30:24,301 [salt.minion      :1711][INFO    ][21735] Returning information for job: 20200115023024188146
2020-01-15 02:30:36,332 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:30:36,422 [salt.state       :300 ][INFO    ][18656] Made the following changes:
'aalib1' changed from 'absent' to '1'
'zvmcloudconnector-common' changed from 'absent' to '1.4.1-0ubuntu1~cloud0'
'libxrender1' changed from 'absent' to '1:0.9.10-1'
'libavahi-common3' changed from 'absent' to '0.7-3.1ubuntu1.2'
'libjack-0.125' changed from 'absent' to '1'
'fonts-dejavu-core' changed from 'absent' to '2.37-1'
'libcdparanoia0' changed from 'absent' to '3.10.2+debian-13'
'libyajl2' changed from 'absent' to '2.1.0-2build1'
'gstreamer1.0-plugins-good' changed from 'absent' to '1.14.5-0ubuntu1~18.04.1'
'libasyncns0' changed from 'absent' to '0.8-6'
'librsvg2-common' changed from 'absent' to '2.40.20-2'
'gstreamer1.0-plugins-base' changed from 'absent' to '1.14.5-0ubuntu1~18.04.1'
'fontconfig' changed from 'absent' to '2.12.6-0ubuntu2'
'libshout3' changed from 'absent' to '2.4.1-2build1'
'python3-openvswitch' changed from 'absent' to '2.11.1-1~u18.04+mcp'
'libcolord2' changed from 'absent' to '1.3.3-2build1'
'nova-api' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'
'qemu-system-x86' changed from 'absent' to '1:3.1+dfsg-2ubuntu3.2~cloud0'
'humanity-icon-theme' changed from 'absent' to '0.6.15'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0ubuntu2.2'
'libsndfile1' changed from 'absent' to '1.0.28-4ubuntu0.18.04.1'
'libxfixes3' changed from 'absent' to '1:5.0.3-1'
'libiec61883-0' changed from 'absent' to '1.2.0-2'
'libxml2-utils' changed from 'absent' to '2.9.4+dfsg1-6.1ubuntu1.2'
'libthai-data' changed from 'absent' to '0.1.27-2'
'libvorbis0a' changed from 'absent' to '1.3.5-4.2'
'libgdk-pixbuf2.0-common' changed from 'absent' to '2.36.11-2'
'libspice-server1' changed from 'absent' to '0.14.0-1ubuntu2.4'
'libtag1v5' changed from 'absent' to '1.11.1+dfsg.1-0.2build2'
'libgtk-3-common' changed from 'absent' to '3.22.30-1ubuntu4'
'qemu-system-data' changed from 'absent' to '1:3.1+dfsg-2ubuntu3.2~cloud0'
'libcaca0' changed from 'absent' to '0.99.beta19-2ubuntu0.18.04.1'
'qemu-keymaps' changed from 'absent' to '1'
'libtag1v5-vanilla' changed from 'absent' to '1.11.1+dfsg.1-0.2build2'
'qemu-system-common' changed from 'absent' to '1:3.1+dfsg-2ubuntu3.2~cloud0'
'python3-tooz' changed from 'absent' to '1.64.2-0ubuntu1~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'libvpx5' changed from 'absent' to '1.7.0-3ubuntu0.18.04.1'
'qemu-system-x86-64' changed from 'absent' to '1'
'libtwolame0' changed from 'absent' to '0.3.13-3'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'libdconf1' changed from 'absent' to '0.26.0-2ubuntu3'
'libxcursor1' changed from 'absent' to '1:1.1.15-1'
'libatspi2.0-0' changed from 'absent' to '2.28.0-1'
'libfontconfig1' changed from 'absent' to '2.12.6-0ubuntu2'
'libproxy1v5' changed from 'absent' to '0.4.15-1'
'python3-sortedcontainers' changed from 'absent' to '1.5.7-1'
'libgraphite2-2.0.0' changed from 'absent' to '1'
'gstreamer1.0-videosource' changed from 'absent' to '1'
'libnspr4' changed from 'absent' to '2:4.18-1ubuntu1'
'libavahi-client3' changed from 'absent' to '0.7-3.1ubuntu1.2'
'libatk1.0-data' changed from 'absent' to '2.28.1-1'
'libxen-4.9' changed from 'absent' to '4.9.2-0ubuntu1'
'libxcb-shm0' changed from 'absent' to '1.13-2~ubuntu18.04'
'libbluetooth3' changed from 'absent' to '5.48-0ubuntu3.2'
'glib-networking' changed from 'absent' to '2.56.0-1'
'libcacard0' changed from 'absent' to '1:2.6.1-1~cloud0'
'libxrandr2' changed from 'absent' to '2:1.5.1-1'
'libgdk-pixbuf2.0-0' changed from 'absent' to '2.36.11-2'
'libvte-2.91-common' changed from 'absent' to '0.52.2-1ubuntu1~18.04.2'
'libunbound2' changed from 'absent' to '1.6.7-1ubuntu2.2'
'libvorbisenc2' changed from 'absent' to '1.3.5-4.2'
'gstreamer1.0-visualization' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2build1'
'python3-microversion-parse' changed from 'absent' to '0.2.1-0ubuntu1~cloud0'
'gtk-update-icon-cache' changed from 'absent' to '3.22.30-1ubuntu4'
'glib-networking-common' changed from 'absent' to '2.56.0-1'
'qemu-block-extra' changed from 'absent' to '1:3.1+dfsg-2ubuntu3.2~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-3'
'at-spi2-core' changed from 'absent' to '2.28.0-1'
'libfontconfig' changed from 'absent' to '1'
'libharfbuzz0b' changed from 'absent' to '1.7.2-1ubuntu1'
'qemu-utils' changed from 'absent' to '1:3.1+dfsg-2ubuntu3.2~cloud0'
'libaa1' changed from 'absent' to '1.4p5-44build2'
'libwayland-server0' changed from 'absent' to '1.16.0-1ubuntu1.1~18.04.1'
'libjack-jackd2-0' changed from 'absent' to '1.9.12~dfsg-2'
'libdatrie1' changed from 'absent' to '0.2.10-7'
'libv4l-0' changed from 'absent' to '1.14.2-1'
'libavc1394-0' changed from 'absent' to '0.5.4-4build1'
'libwavpack1' changed from 'absent' to '5.1.0-2ubuntu1.4'
'python3-zake' changed from 'absent' to '0.2.2-2'
'libxv1' changed from 'absent' to '2:1.0.11-1'
'fontconfig-config' changed from 'absent' to '2.12.6-0ubuntu2'
'gstreamer1.0-audiosink' changed from 'absent' to '1'
'python3-oslo.versionedobjects' changed from 'absent' to '1.35.1-0ubuntu1~cloud0'
'libmpg123-0' changed from 'absent' to '1.25.10-1'
'libpciaccess0' changed from 'absent' to '0.14-1'
'python3-os-resource-classes' changed from 'absent' to '0.3.0-0ubuntu1~cloud0'
'libxtst6' changed from 'absent' to '2:1.2.3-1'
'libspeex1' changed from 'absent' to '1.2~rc1.2-1ubuntu2'
'libxinerama1' changed from 'absent' to '2:1.1.3-1'
'nova-common' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'
'libraw1394-11' changed from 'absent' to '2.1.2-1'
'libxcomposite1' changed from 'absent' to '1:0.4.4-2'
'python3-os-traits' changed from 'absent' to '0.11.0-0ubuntu1~cloud0'
'libcups2' changed from 'absent' to '2.2.7-1ubuntu2.7'
'gtk3-binver-3.0.0' changed from 'absent' to '1'
'python3-pypowervm' changed from 'absent' to '1.1.20-0ubuntu1~cloud0'
'libnss3' changed from 'absent' to '2:3.35-2ubuntu2.7'
'python3-oslo.reports' changed from 'absent' to '1.29.2-0ubuntu1~cloud0'
'gstreamer1.0-audiosource' changed from 'absent' to '1'
'glib-networking-services' changed from 'absent' to '2.56.0-1'
'libxdamage1' changed from 'absent' to '1:1.1.4-3'
'libfdt1' changed from 'absent' to '1.4.5-3'
'libgdk-pixbuf2.0-bin' changed from 'absent' to '2.36.11-2'
'python3-websockify' changed from 'absent' to '0.8.0+dfsg1-9'
'libxi6' changed from 'absent' to '2:1.7.9-1'
'libcairo2' changed from 'absent' to '1.15.10-2ubuntu0.1'
'x11-common' changed from 'absent' to '1:7.7+19ubuntu7.1'
'libbrlapi0.6' changed from 'absent' to '5.5-4ubuntu2.0.1'
'python3-os-vif' changed from 'absent' to '1.15.1-0ubuntu1~cloud0'
'python3-pymemcache' changed from 'absent' to '1.3.2-3'
'libgbm1' changed from 'absent' to '19.0.8-0ubuntu0~18.04.3'
'libv4lconvert0' changed from 'absent' to '1.14.2-1'
'libsamplerate0' changed from 'absent' to '0.1.9-1'
'qemu-kvm' changed from 'absent' to '1:3.1+dfsg-2ubuntu3.2~cloud0'
'python3-psutil' changed from 'absent' to '5.5.1-1ubuntu0.19.04.1~cloud0'
'python3-pyroute2' changed from 'absent' to '0.5.2-1~cloud0'
'libepoxy0' changed from 'absent' to '1.4.3-1'
'libwayland-cursor0' changed from 'absent' to '1.16.0-1ubuntu1.1~18.04.1'
'libpangocairo-1.0-0' changed from 'absent' to '1.40.14-1ubuntu0.1'
'libgstreamer-plugins-good1.0-0' changed from 'absent' to '1.14.5-0ubuntu1~18.04.1'
'libopenvswitch' changed from 'absent' to '2.11.1-1~u18.04+mcp'
'libvirt0' changed from 'absent' to '5.0.0-1ubuntu2.6~cloud0'
'libpango-1.0-0' changed from 'absent' to '1.40.14-1ubuntu0.1'
'gstreamer1.0-videosink' changed from 'absent' to '1'
'python3-ovsdbapp' changed from 'absent' to '0.15.0-0ubuntu1~cloud0'
'python3-libvirt' changed from 'absent' to '5.0.0-1~cloud0'
'libgraphite2-3' changed from 'absent' to '1.3.11-2'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '5.0.0-1ubuntu2.6~cloud0'
'libmp3lame0' changed from 'absent' to '3.100-2'
'libcroco3' changed from 'absent' to '0.6.12-2'
'libxcb-render0' changed from 'absent' to '1.13-2~ubuntu18.04'
'libpangoft2-1.0-0' changed from 'absent' to '1.40.14-1ubuntu0.1'
'libdv4' changed from 'absent' to '1.0.0-11'
'python3-nova' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'
'libgtk-3-bin' changed from 'absent' to '3.22.30-1ubuntu4'
'hicolor-icon-theme' changed from 'absent' to '0.17-2'
'libpcsclite1' changed from 'absent' to '1.8.23-1'
'libatk1.0-0' changed from 'absent' to '2.28.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0ubuntu2'
'libgtk-3-0' changed from 'absent' to '3.22.30-1ubuntu4'
'dconf-service' changed from 'absent' to '0.26.0-2ubuntu3'
'libpixman-1-0' changed from 'absent' to '0.34.0-2'
'seabios' changed from 'absent' to '1.10.2-1ubuntu1'
'libjson-glib-1.0-common' changed from 'absent' to '1.4.2-3'
'libwayland-egl1-mesa' changed from 'absent' to '1'
'libgudev-1.0-0' changed from 'absent' to '1:232-2'
'gsettings-desktop-schemas' changed from 'absent' to '3.28.0-1ubuntu1'
'liborc-0.4-0' changed from 'absent' to '1:0.4.28-1'
'libthai0' changed from 'absent' to '0.1.27-2'
'libvisual-0.4-0' changed from 'absent' to '0.4.0-11'
'gsettings-backend' changed from 'absent' to '1'
'python3-redis' changed from 'absent' to '3.2.0-2~cloud0'
'python3-os-xenapi' changed from 'absent' to '0.3.4-0ubuntu1~cloud0'
'python3-voluptuous' changed from 'absent' to '0.9.3-1'
'libxenstore3.0' changed from 'absent' to '4.9.2-0ubuntu1'
'libgstreamer1.0-0' changed from 'absent' to '1.14.5-0ubuntu1~18.04.1'
'libvirt-daemon' changed from 'absent' to '5.0.0-1ubuntu2.6~cloud0'
'dconf-gsettings-backend' changed from 'absent' to '0.26.0-2ubuntu3'
'libiscsi7' changed from 'absent' to '1.17.0-1.1'
'ubuntu-mono' changed from 'absent' to '16.10+18.04.20181005-0ubuntu1'
'librados2' changed from 'absent' to '13.2.6-0ubuntu0.19.04.4~cloud0'
'libtheora0' changed from 'absent' to '1.1.1+dfsg.1-14'
'libxkbcommon0' changed from 'absent' to '0.8.2-1~ubuntu18.04.1'
'libgstreamer-plugins-base1.0-0' changed from 'absent' to '1.14.5-0ubuntu1~18.04.1'
'libwayland-client0' changed from 'absent' to '1.16.0-1ubuntu1.1~18.04.1'
'libasound2' changed from 'absent' to '1.1.3-5ubuntu0.2'
'libogg0' changed from 'absent' to '1.3.2-1'
'python3-zvmcloudconnector' changed from 'absent' to '1.4.1-0ubuntu1~cloud0'
'libasound2-data' changed from 'absent' to '1.1.3-5ubuntu0.2'
'librbd1' changed from 'absent' to '13.2.6-0ubuntu0.19.04.4~cloud0'
'libjack-0.116' changed from 'absent' to '1'
'gstreamer1.0-x' changed from 'absent' to '1.14.5-0ubuntu1~18.04.1'
'adwaita-icon-theme' changed from 'absent' to '3.28.0-1ubuntu1'
'websockify-common' changed from 'absent' to '0.8.0+dfsg1-9'
'libvte-2.91-0' changed from 'absent' to '0.52.2-1ubuntu1~18.04.2'
'libavahi-common-data' changed from 'absent' to '0.7-3.1ubuntu1.2'
'libwayland-egl1' changed from 'absent' to '1.16.0-1ubuntu1.1~18.04.1'
'librsvg2-2' changed from 'absent' to '2.40.20-2'
'qemu-system-gui' changed from 'absent' to '1:3.1+dfsg-2ubuntu3.2~cloud0'
'libpulse0' changed from 'absent' to '1:11.1-1ubuntu7.4'
'librest-0.7-0' changed from 'absent' to '0.8.0-2'
'libvirglrenderer0' changed from 'absent' to '0.6.0-2'
'libsoup-gnome2.4-1' changed from 'absent' to '2.62.1-1ubuntu0.4'
'libflac8' changed from 'absent' to '1.3.2-1'
'python3-paramiko' changed from 'absent' to '2.0.0-1ubuntu1.2'
'libatk-bridge2.0-0' changed from 'absent' to '2.26.2-1'
'libcairo-gobject2' changed from 'absent' to '1.15.10-2ubuntu0.1'
'libsoup2.4-1' changed from 'absent' to '2.62.1-1ubuntu0.4'
'libjson-glib-1.0-0' changed from 'absent' to '1.4.2-3'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2020-01-15 02:30:36,475 [salt.state       :915 ][INFO    ][18656] Loading fresh modules for state activity
2020-01-15 02:30:36,521 [salt.state       :1951][INFO    ][18656] Completed state [nova-api] at time 02:30:36.521393 duration_in_ms=73493.024
2020-01-15 02:30:36,530 [salt.state       :1780][INFO    ][18656] Running state [nova-conductor] at time 02:30:36.530662
2020-01-15 02:30:36,531 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [nova-conductor]
2020-01-15 02:30:37,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:30:37,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-conductor'] in directory '/root'
2020-01-15 02:30:44,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:30:44,112 [salt.state       :300 ][INFO    ][18656] Made the following changes:
'nova-conductor' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'

2020-01-15 02:30:44,146 [salt.state       :915 ][INFO    ][18656] Loading fresh modules for state activity
2020-01-15 02:30:44,308 [salt.state       :1951][INFO    ][18656] Completed state [nova-conductor] at time 02:30:44.308726 duration_in_ms=7778.063
2020-01-15 02:30:44,325 [salt.state       :1780][INFO    ][18656] Running state [nova-consoleauth] at time 02:30:44.325052
2020-01-15 02:30:44,325 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [nova-consoleauth]
2020-01-15 02:30:45,342 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:30:45,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-consoleauth'] in directory '/root'
2020-01-15 02:30:51,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:30:51,524 [salt.state       :300 ][INFO    ][18656] Made the following changes:
'nova-consoleauth' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'

2020-01-15 02:30:51,597 [salt.state       :915 ][INFO    ][18656] Loading fresh modules for state activity
2020-01-15 02:30:51,672 [salt.state       :1951][INFO    ][18656] Completed state [nova-consoleauth] at time 02:30:51.672841 duration_in_ms=7347.788
2020-01-15 02:30:51,681 [salt.state       :1780][INFO    ][18656] Running state [nova-scheduler] at time 02:30:51.681066
2020-01-15 02:30:51,681 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [nova-scheduler]
2020-01-15 02:30:52,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:30:52,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-scheduler'] in directory '/root'
2020-01-15 02:30:54,340 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023054323920
2020-01-15 02:30:54,369 [salt.minion      :1432][INFO    ][23443] Starting a new job with PID 23443
2020-01-15 02:30:54,399 [salt.minion      :1711][INFO    ][23443] Returning information for job: 20200115023054323920
2020-01-15 02:30:59,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:30:59,168 [salt.state       :300 ][INFO    ][18656] Made the following changes:
'nova-scheduler' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'

2020-01-15 02:30:59,220 [salt.state       :915 ][INFO    ][18656] Loading fresh modules for state activity
2020-01-15 02:30:59,260 [salt.state       :1951][INFO    ][18656] Completed state [nova-scheduler] at time 02:30:59.260740 duration_in_ms=7579.674
2020-01-15 02:30:59,267 [salt.state       :1780][INFO    ][18656] Running state [nova-novncproxy] at time 02:30:59.267410
2020-01-15 02:30:59,267 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [nova-novncproxy]
2020-01-15 02:31:00,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:31:00,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-novncproxy'] in directory '/root'
2020-01-15 02:31:09,290 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:31:09,343 [salt.state       :300 ][INFO    ][18656] Made the following changes:
'nova-novncproxy' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'
'python-f2py' changed from 'absent' to '1'
'websockify' changed from 'absent' to '0.8.0+dfsg1-9'
'python-numpy-abi9' changed from 'absent' to '1'
'libjs-swfobject' changed from 'absent' to '2.2+dfsg-2'
'novnc' changed from 'absent' to '1:0.4+dfsg+1+20131010+gitf68af8af3d-7'
'python-numpy' changed from 'absent' to '1:1.13.3-2ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'python-novnc' changed from 'absent' to '1:0.4+dfsg+1+20131010+gitf68af8af3d-7'
'python-numpy-api11' changed from 'absent' to '1'
'python2.7-numpy' changed from 'absent' to '1'

2020-01-15 02:31:09,380 [salt.state       :915 ][INFO    ][18656] Loading fresh modules for state activity
2020-01-15 02:31:09,425 [salt.state       :1951][INFO    ][18656] Completed state [nova-novncproxy] at time 02:31:09.424950 duration_in_ms=10157.539
2020-01-15 02:31:09,433 [salt.state       :1780][INFO    ][18656] Running state [python3-novaclient] at time 02:31:09.433253
2020-01-15 02:31:09,433 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [python3-novaclient]
2020-01-15 02:31:10,630 [salt.state       :300 ][INFO    ][18656] All specified packages are already installed
2020-01-15 02:31:10,630 [salt.state       :1951][INFO    ][18656] Completed state [python3-novaclient] at time 02:31:10.630563 duration_in_ms=1197.31
2020-01-15 02:31:10,632 [salt.state       :1780][INFO    ][18656] Running state [nova_ssl_mysql] at time 02:31:10.632138
2020-01-15 02:31:10,632 [salt.state       :1813][INFO    ][18656] Executing state test.show_notification for [nova_ssl_mysql]
2020-01-15 02:31:10,632 [salt.state       :300 ][INFO    ][18656] Running nova._ssl.mysql
2020-01-15 02:31:10,632 [salt.state       :1951][INFO    ][18656] Completed state [nova_ssl_mysql] at time 02:31:10.632907 duration_in_ms=0.769
2020-01-15 02:31:10,633 [salt.state       :1780][INFO    ][18656] Running state [nova_controller_ssl_rabbitmq] at time 02:31:10.633580
2020-01-15 02:31:10,633 [salt.state       :1813][INFO    ][18656] Executing state test.show_notification for [nova_controller_ssl_rabbitmq]
2020-01-15 02:31:10,634 [salt.state       :300 ][INFO    ][18656] Running nova._ssl.rabbitmq
2020-01-15 02:31:10,634 [salt.state       :1951][INFO    ][18656] Completed state [nova_controller_ssl_rabbitmq] at time 02:31:10.634346 duration_in_ms=0.766
2020-01-15 02:31:10,637 [salt.state       :1780][INFO    ][18656] Running state [/etc/nova/nova.conf] at time 02:31:10.637164
2020-01-15 02:31:10,637 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/nova/nova.conf]
2020-01-15 02:31:10,685 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/files/stein/nova-controller.conf.Debian'
2020-01-15 02:31:11,408 [salt.state       :300 ][INFO    ][18656] File changed:
--- 
+++ 
@@ -1,7 +1,5 @@
+
 [DEFAULT]
-log_dir = /var/log/nova
-lock_path = /var/lock/nova
-state_path = /var/lib/nova
 
 #
 # From nova.conf
@@ -63,7 +61,7 @@
 # *  period with offset, example: ``month@15`` will result in monthly audits
 #    starting on 15th day of month.
 #  (string value)
-#instance_usage_audit_period = month
+instance_usage_audit_period = hour
 
 #
 # Start and use a daemon that can run the commands that need to be run with
@@ -99,7 +97,7 @@
 # * ``powervm.PowerVMDriver``
 # * ``zvm.ZVMDriver``
 #  (string value)
-#compute_driver = <None>
+compute_driver = libvirt.LibvirtDriver
 
 #
 # Allow destination machine to match source for resize. Useful when
@@ -108,7 +106,7 @@
 # the same host to the destination options. Also set to true
 # if you allow the ServerGroupAffinityFilter and need to resize.
 #  (boolean value)
-#allow_resize_to_same_host = false
+allow_resize_to_same_host = true
 
 #
 # Image properties that should not be inherited from the instance
@@ -165,10 +163,10 @@
 # Possible values:
 #
 # * An empty list will disable the feature (Default).
-# * An example value that would enable the CPU
-#   bandwidth monitor that uses the virt driver variant::
-#
-#     compute_monitors = cpu.virt_driver
+# * An example value that would enable both the CPU and NUMA memory
+#   bandwidth monitors that use the virt driver variant:
+#
+#     compute_monitors = cpu.virt_driver, numa_mem_bw.virt_driver
 #  (list value)
 #compute_monitors =
 
@@ -204,7 +202,7 @@
 # * True: Instances should fail after VIF plugging timeout
 # * False: Instances should continue booting after VIF plugging timeout
 #  (boolean value)
-#vif_plugging_is_fatal = true
+vif_plugging_is_fatal = true
 
 #
 # Timeout for Neutron VIF plugging event message arrival.
@@ -223,7 +221,7 @@
 #   arrive at all.
 #  (integer value)
 # Minimum value: 0
-#vif_plugging_timeout = 300
+vif_plugging_timeout = 300
 
 # Path to '/etc/network/interfaces' template.
 #
@@ -262,10 +260,15 @@
 # given if enough space isn't available. In addition, it should significantly
 # improve performance on writes to new blocks and may even improve I/O
 # performance to prewritten blocks due to reduced fragmentation.
-#  (string value)
-# Possible values:
-# none - No storage provisioning is done up front
-# space - Storage is fully allocated at instance start
+#
+# Possible values:
+#
+# * "none"  => no storage provisioning is done up front
+# * "space" => storage is fully allocated at instance start
+#  (string value)
+# Possible values:
+# none - <No description provided>
+# space - <No description provided>
 #preallocate_images = none
 
 #
@@ -336,6 +339,13 @@
 # If set, the 'hw_pointer_model' image property takes precedence over
 # this configuration option.
 #
+# Possible values:
+#
+# * None: Uses default behavior provided by drivers (mouse on PS2 for
+#         libvirt x86)
+# * ps2mouse: Uses relative movement. Mouse connected by PS2
+# * usbtablet: Uses absolute movement. Tablet connect by USB
+#
 # Related options:
 #
 # * usbtablet must be configured with VNC enabled or SPICE enabled and SPICE
@@ -343,10 +353,9 @@
 #   configured as HVM.
 #   (string value)
 # Possible values:
-# ps2mouse - Uses relative movement. Mouse connected by PS2
-# usbtablet - Uses absolute movement. Tablet connect by USB
-# <None> - Uses default behavior provided by drivers (mouse on PS2 for libvirt
-# x86)
+# <None> - <No description provided>
+# ps2mouse - <No description provided>
+# usbtablet - <No description provided>
 #pointer_model = usbtablet
 
 #
@@ -436,23 +445,21 @@
 # per compute node. For AggregateCoreFilter, it will fall back to this
 # configuration value if no per-aggregate setting is found.
 #
-# NOTE: If this option is set to something *other than* ``None`` or ``0.0``, the
-# allocation ratio will be overwritten by the value of this option, otherwise,
-# the allocation ratio will not change. Once set to a non-default value, it is
-# not possible to "unset" the config to get back to the default behavior. If you
-# want to reset back to the initial value, explicitly specify it to the value of
-# ``initial_cpu_allocation_ratio``.
+# NOTE: This can be set per-compute, or if set to 0.0, the value
+# set on the scheduler node(s) or compute node(s) will be used
+# and defaulted to 16.0. Once set to a non-default value, it is not possible
+# to "unset" the config to get back to the default behavior. If you want
+# to reset back to the default, explicitly specify 16.0.
+#
+# NOTE: As of the 16.0.0 Pike release, this configuration option is ignored
+# for the ironic.IronicDriver compute driver and is hardcoded to 1.0.
 #
 # Possible values:
 #
 # * Any valid positive integer or float value
-#
-# Related options:
-#
-# * ``initial_cpu_allocation_ratio``
 #  (floating point value)
 # Minimum value: 0
-#cpu_allocation_ratio = <None>
+cpu_allocation_ratio = 16.0
 
 #
 # This option helps you specify virtual RAM to physical RAM
@@ -467,23 +474,21 @@
 # per compute node. For AggregateRamFilter, it will fall back to this
 # configuration value if no per-aggregate setting found.
 #
-# NOTE: If this option is set to something *other than* ``None`` or ``0.0``, the
-# allocation ratio will be overwritten by the value of this option, otherwise,
-# the allocation ratio will not change. Once set to a non-default value, it is
-# not possible to "unset" the config to get back to the default behavior. If you
-# want to reset back to the initial value, explicitly specify it to the value of
-# ``initial_ram_allocation_ratio``.
+# NOTE: This can be set per-compute, or if set to 0.0, the value
+# set on the scheduler node(s) or compute node(s) will be used and
+# defaulted to 1.5. Once set to a non-default value, it is not possible
+# to "unset" the config to get back to the default behavior. If you want
+# to reset back to the default, explicitly specify 1.5.
+#
+# NOTE: As of the 16.0.0 Pike release, this configuration option is ignored
+# for the ironic.IronicDriver compute driver and is hardcoded to 1.0.
 #
 # Possible values:
 #
 # * Any valid positive integer or float value
-#
-# Related options:
-#
-# * ``initial_ram_allocation_ratio``
 #  (floating point value)
 # Minimum value: 0
-#ram_allocation_ratio = <None>
+ram_allocation_ratio = 1.5
 
 #
 # This option helps you specify virtual disk to physical disk
@@ -502,74 +507,21 @@
 # to preserve a percentage of the disk for uses other than
 # instances.
 #
-# NOTE: If this option is set to something *other than* ``None`` or ``0.0``, the
-# allocation ratio will be overwritten by the value of this option, otherwise,
-# the allocation ratio will not change. Once set to a non-default value, it is
-# not possible to "unset" the config to get back to the default behavior. If you
-# want to reset back to the initial value, explicitly specify it to the value of
-# ``initial_disk_allocation_ratio``.
+# NOTE: This can be set per-compute, or if set to 0.0, the value
+# set on the scheduler node(s) or compute node(s) will be used and
+# defaulted to 1.0. Once set to a non-default value, it is not possible
+# to "unset" the config to get back to the default behavior. If you want
+# to reset back to the default, explicitly specify 1.0.
+#
+# NOTE: As of the 16.0.0 Pike release, this configuration option is ignored
+# for the ironic.IronicDriver compute driver and is hardcoded to 1.0.
 #
 # Possible values:
 #
 # * Any valid positive integer or float value
-#
-# Related options:
-#
-# * ``initial_disk_allocation_ratio``
 #  (floating point value)
 # Minimum value: 0
-#disk_allocation_ratio = <None>
-
-#
-# This option helps you specify initial virtual CPU to physical CPU allocation
-# ratio.
-#
-# This is only used when initially creating the ``computes_nodes`` table record
-# for a given nova-compute service.
-#
-# See https://docs.openstack.org/nova/latest/admin/configuration/schedulers.html
-# for more details and usage scenarios.
-#
-# Related options:
-#
-# * ``cpu_allocation_ratio``
-#  (floating point value)
-# Minimum value: 0
-#initial_cpu_allocation_ratio = 16.0
-
-#
-# This option helps you specify initial virtual RAM to physical RAM allocation
-# ratio.
-#
-# This is only used when initially creating the ``computes_nodes`` table record
-# for a given nova-compute service.
-#
-# See https://docs.openstack.org/nova/latest/admin/configuration/schedulers.html
-# for more details and usage scenarios.
-#
-# Related options:
-#
-# * ``ram_allocation_ratio``
-#  (floating point value)
-# Minimum value: 0
-#initial_ram_allocation_ratio = 1.5
-
-#
-# This option helps you specify initial virtual disk to physical disk allocation
-# ratio.
-#
-# This is only used when initially creating the ``computes_nodes`` table record
-# for a given nova-compute service.
-#
-# See https://docs.openstack.org/nova/latest/admin/configuration/schedulers.html
-# for more details and usage scenarios.
-#
-# Related options:
-#
-# * ``disk_allocation_ratio``
-#  (floating point value)
-# Minimum value: 0
-#initial_disk_allocation_ratio = 1.0
+disk_allocation_ratio = 1.0
 
 #
 # Console proxy host to be used to connect to instances on this host. It is the
@@ -579,10 +531,6 @@
 #
 # * Current hostname (default) or any string representing hostname.
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #console_host = <current_hostname>
 
 #
@@ -595,6 +543,12 @@
 # * Any string representing network name.
 #  (string value)
 #default_access_ip_network_name = <None>
+
+#
+# Whether to batch up the application of IPTables rules during a host restart
+# and apply all at the end of the init phase.
+#  (boolean value)
+#defer_iptables_apply = false
 
 #
 # Specifies where instances are stored on the hypervisor's disk.
@@ -605,15 +559,7 @@
 # * $state_path/instances where state_path is a config option that specifies
 #   the top-level directory for maintaining nova's state. (default) or
 #   Any string representing directory path.
-#
-# Related options:
-#
-# * ``[workarounds]/ensure_libvirt_rbd_instance_dir_cleanup``
-#  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
+#  (string value)
 #instances_path = $state_path/instances
 
 #
@@ -623,6 +569,7 @@
 #  (boolean value)
 #instance_usage_audit = false
 
+
 #
 # Maximum number of 1 second retries in live_migration. It specifies number
 # of retries to iptables when it complains. It happens when an user continuously
@@ -697,7 +644,7 @@
 # * Any negative value is treated as 0.
 # * For any value > 0, total attempts are (value + 1)
 #  (integer value)
-#block_device_allocate_retries = 60
+block_device_allocate_retries = 600
 
 #
 # Number of greenthreads available for use to sync power states.
@@ -755,7 +702,7 @@
 #
 # Related options:
 #
-# * If ``handle_virt_lifecycle_events`` in the ``workarounds`` group is
+# * If ``handle_virt_lifecycle_events`` in workarounds_group is
 #   false and this option is negative, then instances that get out
 #   of sync between the hypervisor and the Nova database will have
 #   to be synchronized manually.
@@ -1013,8 +960,7 @@
 # perform a clean shutdown. While performing stop, rescue and shelve,
 # rebuild operations, configuring this option gives the VM a chance
 # to perform a controlled shutdown before the instance is powered off.
-# The default timeout is 60 seconds. A value of 0 (zero) means the guest
-# will be powered off immediately with no opportunity for guest OS clean-up.
+# The default timeout is 60 seconds.
 #
 # The timeout value can be overridden on a per image basis by means
 # of os_shutdown_timeout that is an image metadata setting allowing
@@ -1023,9 +969,9 @@
 #
 # Possible values:
 #
-# * A positive integer or 0 (default value is 60).
-#  (integer value)
-# Minimum value: 0
+# * Any positive integer in seconds (default value is 60).
+#  (integer value)
+# Minimum value: 1
 #shutdown_timeout = 60
 
 #
@@ -1034,17 +980,24 @@
 # above option enables action to be taken when such instances are
 # identified.
 #
-# Related options:
-#
-# * ``running_deleted_instance_poll_interval``
-# * ``running_deleted_instance_timeout``
-#  (string value)
-# Possible values:
-# reap - Powers down the instances and deletes them
-# log - Logs warning message about deletion of the resource
-# shutdown - Powers down instances and marks them as non-bootable which can be
-# later used for debugging/analysis
-# noop - Takes no action
+# Possible values:
+#
+# * reap: Powers down the instances and deletes them(default)
+# * log: Logs warning message about deletion of the resource
+# * shutdown: Powers down instances and marks them as non-
+#   bootable which can be later used for debugging/analysis
+# * noop: Takes no action
+#
+# Related options:
+#
+# * running_deleted_instance_poll_interval
+# * running_deleted_instance_timeout
+#  (string value)
+# Possible values:
+# noop - <No description provided>
+# log - <No description provided>
+# shutdown - <No description provided>
+# reap - <No description provided>
 #running_deleted_instance_action = reap
 
 #
@@ -1087,12 +1040,13 @@
 # Possible values:
 #
 # * Any positive integer defines how many attempts are made.
+# * Any value <=0 means no delete attempts occur, but you should use
+#   ``instance_delete_interval`` to disable the delete attempts.
 #
 # Related options:
 #
 # * ``[DEFAULT] instance_delete_interval`` can be used to disable this option.
 #  (integer value)
-# Minimum value: 1
 #maximum_instance_delete_attempts = 5
 
 #
@@ -1104,14 +1058,20 @@
 # case-insensitive. Setting this option can increase the usability for end
 # users as they don't have to distinguish among instances with the same name
 # by their IDs.
-#  (string value)
-# Possible values:
-# '' - An empty value means that no uniqueness check is done and duplicate names
-# are possible
-# project - The instance name check is done only for instances within the same
-# project
-# global - The instance name check is done for all instances regardless of the
-# project
+#
+# Possible values:
+#
+# * '': An empty value means that no uniqueness check is done and duplicate
+#   names are possible.
+# * "project": The instance name check is done only for instances within the
+#   same project.
+# * "global": The instance name check is done for all instances regardless of
+#   the project.
+#  (string value)
+# Possible values:
+# '' - <No description provided>
+# project - <No description provided>
+# global - <No description provided>
 #osapi_compute_unique_server_name_scope =
 
 #
@@ -1166,11 +1126,21 @@
 # Minimum value: -1
 #migrate_max_retries = -1
 
-# DEPRECATED:
+#
 # Configuration drive format
 #
 # Configuration drive format that will contain metadata attached to the
 # instance when it boots.
+#
+# Possible values:
+#
+# * iso9660: A file system image standard that is widely supported across
+#   operating systems. NOTE: Mind the libvirt bug
+#   (https://bugs.launchpad.net/nova/+bug/1246201) - If your hypervisor
+#   driver is libvirt, and you want live migrate to work without shared storage,
+#   then use VFAT.
+# * vfat: For legacy reasons, you can configure the configuration drive to
+#   use VFAT format instead of ISO 9660.
 #
 # Related options:
 #
@@ -1187,16 +1157,8 @@
 #   drive, set the ``[hyperv] config_drive_cdrom`` option to true.
 #  (string value)
 # Possible values:
-# iso9660 - A file system image standard that is widely supported across
-# operating systems.
-# vfat - Provided for legacy reasons and to enable live migration with the
-# libvirt driver and non-shared storage
-# This option is deprecated for removal since 19.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option was originally added as a workaround for bug in libvirt, #1246201,
-# that was resolved in libvirt v1.2.17. As a result, this option is no longer
-# necessary or useful.
+# iso9660 - <No description provided>
+# vfat - <No description provided>
 #config_drive_format = iso9660
 
 #
@@ -1276,11 +1238,7 @@
 # * routing_source_ip
 # * vpn_ip
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#my_ip = <host_ipv4>
+my_ip = 192.168.10.36
 
 #
 # The IP address which is used to connect to the block storage network.
@@ -1312,10 +1270,6 @@
 #
 # * String with hostname, FQDN or IP address. Default is hostname of this host.
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #host = <current_hostname>
 
 # DEPRECATED:
@@ -1666,28 +1620,6 @@
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
 #iptables_drop_action = DROP
-
-# DEPRECATED:
-# Defer application of IPTables rules until after init phase.
-#
-# When a compute service is restarted each instance running on the host has its
-# iptables rules built and applied sequentially during the host init stage. The
-# impact of this, especially on a host running many instances, can be observed
-# as
-# a period where some instances are not accessible as the existing iptables
-# rules
-# have been torn down and not yet re-applied.
-#
-# This is a workaround that prevents the application of the iptables rules until
-# all instances on the host had been initialised then the rules for all
-# instances
-# are applied all at once preventing a 'blackout' period.
-#  (boolean value)
-# This option is deprecated for removal since 19.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# nova-network is deprecated, as are any related configuration options.
-#defer_iptables_apply = false
 
 # DEPRECATED:
 # This option represents the period of time, in seconds, that the ovs_vsctl
@@ -2153,7 +2085,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#force_dhcp_release = true
+force_dhcp_release = true
 
 # DEPRECATED:
 # When this option is True, whenever a DNS entry must be updated, a fanout cast
@@ -2205,7 +2137,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#dhcp_domain = novalocal
+dhcp_domain = novalocal
 
 # DEPRECATED:
 # This option allows you to specify the L3 management library to be used.
@@ -2659,17 +2591,8 @@
 # Run as a background process. (boolean value)
 #daemon = false
 
-# Disallow non-encrypted connections. (boolean value)
-#ssl_only = false
-
 # Set to True if source host is addressed with IPv6. (boolean value)
 #source_is_ipv6 = false
-
-# Path to SSL certificate file. (string value)
-#cert = self.pem
-
-# SSL key file (if separate from cert). (string value)
-#key = <None>
 
 #
 # Path to directory with content which will be served by a web server.
@@ -2692,10 +2615,6 @@
 #
 # * ``state_path``
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #pybasedir = <Path>
 
 #
@@ -2710,7 +2629,7 @@
 #
 # * The full path to a directory.
 #  (string value)
-#bindir = /usr/local/bin
+#bindir = /tmp/nova/.tox/shared/local/bin
 
 #
 # The top-level directory for maintaining Nova's state.
@@ -2727,6 +2646,7 @@
 # * The full path to a directory. Defaults to value provided in ``pybasedir``.
 #  (string value)
 #state_path = $pybasedir
+state_path = /var/lib/nova
 
 #
 # This option allows setting an alternate timeout value for RPC calls
@@ -2737,7 +2657,6 @@
 # Operations with RPC calls that utilize this value:
 #
 # * live migration
-# * scheduling
 #
 # Related options:
 #
@@ -2757,7 +2676,7 @@
 #   is less than report_interval, services will routinely be considered down,
 #   because they report in too rarely.
 #  (integer value)
-#report_interval = 10
+report_interval = 60
 
 #
 # Maximum time in seconds since last check-in for up service
@@ -2771,7 +2690,7 @@
 # * report_interval (service_down_time should not be less than report_interval)
 # * scheduler.periodic_task_interval
 #  (integer value)
-#service_down_time = 60
+service_down_time = 180
 
 #
 # Enable periodic tasks.
@@ -2820,7 +2739,7 @@
 # The OpenStack API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#osapi_compute_listen = 0.0.0.0
+osapi_compute_listen = 192.168.10.36
 
 #
 # Port on which the OpenStack API will listen.
@@ -2855,7 +2774,7 @@
 # The metadata API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#metadata_listen = 0.0.0.0
+metadata_listen = 192.168.10.36
 
 #
 # Port on which the metadata API will listen.
@@ -2882,7 +2801,7 @@
 # * None (default value)
 #  (integer value)
 # Minimum value: 1
-#metadata_workers = <None>
+metadata_workers = 8
 
 #
 # This option specifies the driver to be used for the servicegroup service.
@@ -2896,15 +2815,19 @@
 # driver
 # and Memcache ServiceGroup driver.
 #
+# Possible Values:
+#
+#     * db : Database ServiceGroup driver
+#     * mc : Memcache ServiceGroup driver
+#
 # Related Options:
 #
-# * ``service_down_time`` (maximum time since last check-in for up service)
-#  (string value)
-# Possible values:
-# db - Database ServiceGroup driver
-# mc - Memcache ServiceGroup driver
+#     * service_down_time (maximum time since last check-in for up service)
+#  (string value)
+# Possible values:
+# db - <No description provided>
+# mc - <No description provided>
 #servicegroup_driver = db
-
 #
 # From oslo.log
 #
@@ -2919,7 +2842,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -2942,19 +2865,19 @@
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
 #watch_log_file = false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_syslog = false
 
 # Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
@@ -2970,67 +2893,33 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when the
-# service was started) is used when scheduling the next rotation. (string value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is
-# DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
@@ -3043,9 +2932,9 @@
 # Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
 # value)
 #rate_limit_except_level = CRITICAL
 
@@ -3064,6 +2953,151 @@
 
 # The time-to-live in sec of idle connections in the pool (integer value)
 #conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
 
 # Size of executor thread pool when executor is threading or eventlet. (integer
 # value)
@@ -3072,6 +3106,7 @@
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
+rpc_response_timeout = 30
 
 # The network address and optional user credentials for connecting to the
 # messaging backend, in URL format. The expected format is:
@@ -3084,11 +3119,20 @@
 # oslo_messaging.TransportURL at
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
-#transport_url = rabbit://
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
+#control_exchange = keystone
+
 
 #
 # From oslo.service.periodic_task
@@ -3134,13 +3178,14 @@
 #
 
 #
-# Determine the strategy to use for authentication.
-#  (string value)
-# Possible values:
-# keystone - Use keystone for authentication.
-# noauth2 - Designed for testing only, as it does no actual credential checking.
-# 'noauth2' provides administrative credentials only if 'admin' is specified as
-# the username.
+# This determines the strategy to use for authentication: keystone or noauth2.
+# 'noauth2' is designed for testing only, as it does no actual credential
+# checking. 'noauth2' provides administrative credentials only if 'admin' is
+# specified as the username.
+#  (string value)
+# Possible values:
+# keystone - <No description provided>
+# noauth2 - <No description provided>
 #auth_strategy = keystone
 
 #
@@ -3179,25 +3224,39 @@
 # A list of vendordata providers.
 #
 # vendordata providers are how deployers can provide metadata via configdrive
-# and metadata that is specific to their deployment.
+# and metadata that is specific to their deployment. There are currently two
+# supported providers: StaticJSON and DynamicJSON.
+#
+# StaticJSON reads a JSON file configured by the flag vendordata_jsonfile_path
+# and places the JSON from that file into vendor_data.json and
+# vendor_data2.json.
+#
+# DynamicJSON is configured via the vendordata_dynamic_targets flag, which is
+# documented separately. For each of the endpoints specified in that flag, a
+# section is added to the vendor_data2.json.
 #
 # For more information on the requirements for implementing a vendordata
 # dynamic endpoint, please see the vendordata.rst file in the nova developer
 # reference.
 #
-# Related options:
-#
-# * ``vendordata_dynamic_targets``
-# * ``vendordata_dynamic_ssl_certfile``
-# * ``vendordata_dynamic_connect_timeout``
-# * ``vendordata_dynamic_read_timeout``
-# * ``vendordata_dynamic_failure_fatal``
+# Possible values:
+#
+# * A list of vendordata providers, with StaticJSON and DynamicJSON being
+#   current options.
+#
+# Related options:
+#
+# * vendordata_dynamic_targets
+# * vendordata_dynamic_ssl_certfile
+# * vendordata_dynamic_connect_timeout
+# * vendordata_dynamic_read_timeout
+# * vendordata_dynamic_failure_fatal
 #  (list value)
 #vendordata_providers = StaticJSON
 
 #
 # A list of targets for the dynamic vendordata provider. These targets are of
-# the form ``<name>@<url>``.
+# the form <name>@<url>.
 #
 # The dynamic vendordata provider collects metadata by contacting external REST
 # services and querying them for information about the instance. This behaviour
@@ -3286,33 +3345,16 @@
 #metadata_cache_expiration = 15
 
 #
-# Indicates that the nova-metadata API service has been deployed per-cell, so
-# that we can have better performance and data isolation in a multi-cell
-# deployment. Users should consider the use of this configuration depending on
-# how neutron is setup. If you have networks that span cells, you might need to
-# run nova-metadata API service globally. If your networks are segmented along
-# cell boundaries, then you can run nova-metadata API service per cell. When
-# running nova-metadata API service per cell, you should also configure each
-# Neutron metadata-agent to point to the corresponding nova-metadata API
-# service.
-#  (boolean value)
-#local_metadata_per_cell = false
-
-#
 # Cloud providers may store custom data in vendor data file that will then be
 # available to the instances via the metadata service, and to the rendering of
 # config-drive. The default class for this, JsonFileVendorData, loads this
 # information from a JSON file, whose path is configured by this option. If
 # there is no path set by this option, the class returns an empty dictionary.
 #
-# Note that when using this to provide static vendor data to a configuration
-# drive, the nova-compute service must be configured with this option and the
-# file must be accessible from the nova-compute host.
-#
 # Possible values:
 #
 # * Any string representing the path to the data file, or an empty string
-#   (default).
+#     (default).
 #  (string value)
 #vendordata_jsonfile_path = <None>
 
@@ -3322,7 +3364,7 @@
 #  (integer value)
 # Minimum value: 0
 # Deprecated group/name - [DEFAULT]/osapi_max_limit
-#max_limit = 1000
+max_limit = 1000
 
 #
 # This string is prepended to the normal URL that is returned in links to the
@@ -3360,68 +3402,36 @@
 #  (boolean value)
 #instance_list_per_project_cells = false
 
-#
-# This controls the method by which the API queries cell databases in
-# smaller batches during large instance list operations. If batching is
-# performed, a large instance list operation will request some fraction
-# of the overall API limit from each cell database initially, and will
-# re-request that same batch size as records are consumed (returned)
-# from each cell as necessary. Larger batches mean less chattiness
-# between the API and the database, but potentially more wasted effort
-# processing the results from the database which will not be returned to
-# the user. Any strategy will yield a batch size of at least 100 records,
-# to avoid a user causing many tiny database queries in their request.
-#
-# Related options:
-#
-# * instance_list_cells_batch_fixed_size
-# * max_limit
-#  (string value)
-# Possible values:
-# distributed - Divide the limit requested by the user by the number of cells in
-# the system. This requires counting the cells in the system initially, which
-# will not be refreshed until service restart or SIGHUP. The actual batch size
-# will be increased by 10% over the result of ($limit / $num_cells).
-# fixed - Request fixed-size batches from each cell, as defined by
-# ``instance_list_cells_batch_fixed_size``. If the limit is smaller than the
-# batch size, the limit will be used instead. If you do not wish batching to be
-# used at all, setting the fixed size equal to the ``max_limit`` value will
-# cause only one request per cell database to be issued.
-#instance_list_cells_batch_strategy = distributed
-
-#
-# This controls the batch size of instances requested from each cell
-# database if ``instance_list_cells_batch_strategy``` is set to ``fixed``.
-# This integral value will define the limit issued to each cell every time
-# a batch of instances is requested, regardless of the number of cells in
-# the system or any other factors. Per the general logic called out in
-# the documentation for ``instance_list_cells_batch_strategy``, the
-# minimum value for this is 100 records per batch.
-#
-# Related options:
-#
-# * instance_list_cells_batch_strategy
-# * max_limit
-#  (integer value)
-# Minimum value: 100
-#instance_list_cells_batch_fixed_size = 100
-
-#
-# When set to False, this will cause the API to return a 500 error if there is
-# an
-# infrastructure failure like non-responsive cells. If you want the API to skip
-# the down cells and return the results from the up cells set this option to
-# True.
-#
-# Note that from API microversion 2.69 there could be transient conditions in
-# the
-# deployment where certain records are not available and the results could be
-# partial for certain requests containing those records. In those cases this
-# option will be ignored. See "Handling Down Cells" section of the Compute API
-# guide (https://developer.openstack.org/api-guide/compute/down_cells.html) for
-# more information.
-#  (boolean value)
-#list_records_by_skipping_down_cells = true
+# DEPRECATED:
+# This option is a list of all instance states for which network address
+# information should not be returned from the API.
+#
+# Possible values:
+#
+#   A list of strings, where each string is a valid VM state, as defined in
+#   nova/compute/vm_states.py. As of the Newton release, they are:
+#
+# * "active"
+# * "building"
+# * "paused"
+# * "suspended"
+# * "stopped"
+# * "rescued"
+# * "resized"
+# * "soft-delete"
+# * "deleted"
+# * "error"
+# * "shelved"
+# * "shelved_offloaded"
+#  (list value)
+# Deprecated group/name - [DEFAULT]/osapi_hide_server_address_states
+# This option is deprecated for removal since 17.0.0.
+# Its value may be silently ignored in the future.
+# Reason: This option hide the server address in server representation for
+# configured server states. Which makes GET server API controlled by this config
+# options. Due to this config options, user would not be able to discover the
+# API behavior on different clouds which leads to the interop issue.
+#hide_server_address_states = building
 
 #
 # When True, the TenantNetworkController will query the Neutron API to get the
@@ -3453,74 +3463,127 @@
 
 
 [api_database]
-connection = sqlite:////var/lib/nova/nova_api.sqlite
-#
-# The *Nova API Database* is a separate database which is used for information
-# which is used across *cells*. This database is mandatory since the Mitaka
-# release (13.0.0).
-#
-# This group should **not** be configured for the ``nova-compute`` service.
-
-#
-# From nova.conf
-#
-
-# The SQLAlchemy connection string to use to connect to the database. Do not set
-# this for the ``nova-compute`` service. (string value)
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
 #connection = <None>
+connection = mysql+pymysql://nova:opnfv_secret@192.168.10.23/nova_api?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster (NDB).
+# (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer than this
+# number of seconds will be replaced with a new one the next time they are
+# checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to set the minimum pool size is not supported by
+# sqlalchemy.
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
 
 # Optional URL parameters to append onto the connection URL at connect time;
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [api_database]/idle_timeout
-#connection_recycle_time = 3600
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
-#max_pool_size = <None>
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-#max_overflow = <None>
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-#pool_timeout = <None>
 
 
 [barbican]
-
-#
-# From nova.conf
+#
+# From castellan.config
 #
 
 # Use this endpoint to connect to Barbican, for example:
@@ -3533,6 +3596,7 @@
 # Use this endpoint to connect to Keystone (string value)
 # Deprecated group/name - [key_manager]/auth_url
 #auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://192.168.10.35:35357/v3
 
 # Number of seconds to wait before retrying poll for key creation completion
 # (integer value)
@@ -3541,23 +3605,23 @@
 # Number of times to retry poll for key creation completion (integer value)
 #number_of_retries = 60
 
-# Specifies if insecure TLS (https) requests. If False, the server's certificate
-# will not be validated (boolean value)
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
 #verify_ssl = true
 
-# Specifies the type of endpoint.  Allowed values are: public, private, and
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
 # admin (string value)
 # Possible values:
 # public - <No description provided>
 # internal - <No description provided>
 # admin - <No description provided>
 #barbican_endpoint_type = public
+barbican_endpoint_type = internal
 
 
 [cache]
-
-#
-# From nova.conf
+#
+# From oslo.cache
 #
 
 # Prefix for building the configuration dictionary for the cache region. This
@@ -3565,9 +3629,9 @@
 # with the same configuration name. (string value)
 #config_prefix = cache.oslo
 
-# Default TTL, in seconds, for any cached item in the dogpile.cache region. This
-# applies to any cached method that doesn't have an explicit cache expiration
-# time defined for it. (integer value)
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
 #expiration_time = 600
 
 # Cache backend module. For eventlet-based or environments with hundreds of
@@ -3590,6 +3654,7 @@
 # dogpile.cache.memory_pickle - <No description provided>
 # dogpile.cache.null - <No description provided>
 #backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
 
 # Arguments supplied to the backend module. Specify this option once per
 # argument to be passed to the dogpile.cache backend. Example format:
@@ -3602,17 +3667,19 @@
 #proxies =
 
 # Global toggle for caching. (boolean value)
-#enabled = false
-
-# Extra debugging from the cache backend (cache keys, get/set/delete/etc calls).
-# This is only really useful if you need to see the specific cache-backend
-# get/set/delete calls with the keys/values.  Typically this should be left set
-# to false. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
 #debug_cache_backend = false
 
 # Memcache servers in the format of "host:port". (dogpile.cache.memcache and
 # oslo_cache.memcache_pool backends only). (list value)
 #memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 
 # Number of seconds memcached server is considered dead before it is tried
 # again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
@@ -3636,8 +3703,8 @@
 #memcache_pool_connection_get_timeout = 10
 
 
+
 [cells]
-enable = False
 #
 # DEPRECATED: Cells options allow you to use cells v1 functionality in an
 # OpenStack deployment.
@@ -4163,9 +4230,6 @@
 #
 # Info to match when looking for cinder in the service catalog.
 #
-# The ``<service_name>`` is optional and omitted by default since it should
-# not be necessary in most deployments.
-#
 # Possible values:
 #
 # * Format is separated values of the form:
@@ -4178,7 +4242,7 @@
 #
 # * endpoint_template - Setting this option will override catalog_info
 #  (string value)
-#catalog_info = volumev3::publicURL
+catalog_info = volumev3:cinderv3:internalURL
 
 #
 # If this option is set then it will override service catalog lookup with
@@ -4206,7 +4270,7 @@
 #
 # * Any string representing region name
 #  (string value)
-#os_region_name = <None>
+os_region_name = RegionOne
 
 #
 # Number of times cinderclient should retry on any failed http call.
@@ -4236,62 +4300,40 @@
 # By default there is no availability zone restriction on volume attach.
 #  (boolean value)
 #cross_az_attach = true
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [cinder]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -4303,209 +4345,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [cinder]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
-
-
-[compute]
-
-#
-# From nova.conf
-#
-
-#
-# Enables reporting of build failures to the scheduler.
-#
-# Any nonzero value will enable sending build failure statistics to the
-# scheduler for use by the BuildFailureWeigher.
-#
-# Possible values:
-#
-# * Any positive integer enables reporting build failures.
-# * Zero to disable reporting build failures.
-#
-# Related options:
-#
-# * [filter_scheduler]/build_failure_weight_multiplier
-#
-#  (integer value)
-#consecutive_build_service_disable_threshold = 10
-
-#
-# Time to wait in seconds before resending an ACPI shutdown signal to
-# instances.
-#
-# The overall time to wait is set by ``shutdown_timeout``.
-#
-# Possible values:
-#
-# * Any integer greater than 0 in seconds
-#
-# Related options:
-#
-# * ``shutdown_timeout``
-#  (integer value)
-# Minimum value: 1
-#shutdown_retry_interval = 10
-
-#
-# Interval for updating nova-compute-side cache of the compute node resource
-# provider's inventories, aggregates, and traits.
-#
-# This option specifies the number of seconds between attempts to update a
-# provider's inventories, aggregates and traits in the local cache of the
-# compute
-# node.
-#
-# A value of zero disables cache refresh completely.
-#
-# The cache can be cleared manually at any time by sending SIGHUP to the compute
-# process, causing it to be repopulated the next time the data is accessed.
-#
-# Possible values:
-#
-# * Any positive integer in seconds, or zero to disable refresh.
-#  (integer value)
-# Minimum value: 0
-# Note: This option can be changed without restarting.
-#resource_provider_association_refresh = 300
-
-#
-# Defines which physical CPUs (pCPUs) will be used for best-effort guest vCPU
-# resources.
-#
-# Currently only used by libvirt driver to place guest emulator threads when
-# the flavor extra spec is set to ``hw:emulator_threads_policy=share``.
-#
-# For example::
-#
-#     cpu_shared_set = "4-12,^8,15"
-#  (string value)
-#cpu_shared_set = <None>
-
-#
-# Determine if the source compute host should wait for a ``network-vif-plugged``
-# event from the (neutron) networking service before starting the actual
-# transfer
-# of the guest to the destination compute host.
-#
-# Note that this option is read on the destination host of a live migration.
-# If you set this option the same on all of your compute hosts, which you should
-# do if you use the same networking backend universally, you do not have to
-# worry about this.
-#
-# Before starting the transfer of the guest, some setup occurs on the
-# destination
-# compute host, including plugging virtual interfaces. Depending on the
-# networking backend **on the destination host**, a ``network-vif-plugged``
-# event may be triggered and then received on the source compute host and the
-# source compute can wait for that event to ensure networking is set up on the
-# destination host before starting the guest transfer in the hypervisor.
-#
-# .. note::
-#
-#    The compute service cannot reliably determine which types of virtual
-#    interfaces (``port.binding:vif_type``) will send ``network-vif-plugged``
-#    events without an accompanying port ``binding:host_id`` change.
-#    Open vSwitch and linuxbridge should be OK, but OpenDaylight is at least
-#    one known backend that will not currently work in this case, see bug
-#    https://launchpad.net/bugs/1755890 for more details.
-#
-# Possible values:
-#
-# * True: wait for ``network-vif-plugged`` events before starting guest transfer
-# * False: do not wait for ``network-vif-plugged`` events before starting guest
-#   transfer (this is the legacy behavior)
-#
-# Related options:
-#
-# * [DEFAULT]/vif_plugging_is_fatal: if ``live_migration_wait_for_vif_plug`` is
-#   True and ``vif_plugging_timeout`` is greater than 0, and a timeout is
-#   reached, the live migration process will fail with an error but the guest
-#   transfer will not have started to the destination host
-# * [DEFAULT]/vif_plugging_timeout: if ``live_migration_wait_for_vif_plug`` is
-#   True, this controls the amount of time to wait before timing out and either
-#   failing if ``vif_plugging_is_fatal`` is True, or simply continuing with the
-#   live migration
-#  (boolean value)
-#live_migration_wait_for_vif_plug = true
-
-#
-# Number of concurrent disk-IO-intensive operations (glance image downloads,
-# image format conversions, etc.) that we will do in parallel.  If this is set
-# too high then response time suffers.
-# The default value of 0 means no limit.
-#   (integer value)
-# Minimum value: 0
-#max_concurrent_disk_ops = 0
-
-#
-# Maximum number of disk devices allowed to attach to a single server. Note
-# that the number of disks supported by an server depends on the bus used. For
-# example, the ``ide`` disk bus is limited to 4 attached devices. The configured
-# maximum is enforced during server create, rebuild, evacuate, unshelve, live
-# migrate, and attach volume.
-#
-# Usually, disk bus is determined automatically from the device type or disk
-# device, and the virtualization type. However, disk bus
-# can also be specified via a block device mapping or an image property.
-# See the ``disk_bus`` field in :doc:`/user/block-device-mapping` for more
-# information about specifying disk bus in a block device mapping, and
-# see https://docs.openstack.org/glance/latest/admin/useful-image-
-# properties.html
-# for more information about the ``hw_disk_bus`` image property.
-#
-# Operators changing the ``[compute]/max_disk_devices_to_attach`` on a compute
-# service that is hosting servers should be aware that it could cause rebuilds
-# to
-# fail, if the maximum is decreased lower than the number of devices already
-# attached to servers. For example, if server A has 26 devices attached and an
-# operators changes ``[compute]/max_disk_devices_to_attach`` to 20, a request to
-# rebuild server A will fail and go into ERROR state because 26 devices are
-# already attached and exceed the new configured maximum of 20.
-#
-# Operators setting ``[compute]/max_disk_devices_to_attach`` should also be
-# aware
-# that during a cold migration, the configured maximum is only enforced in-place
-# and the destination is not checked before the move. This means if an operator
-# has set a maximum of 26 on compute host A and a maximum of 20 on compute host
-# B, a cold migration of a server with 26 attached devices from compute host A
-# to
-# compute host B will succeed. Then, once the server is on compute host B, a
-# subsequent request to rebuild the server will fail and go into ERROR state
-# because 26 devices are already attached and exceed the configured maximum of
-# 20
-# on compute host B.
-#
-# The configured maximum is not enforced on shelved offloaded servers, as they
-# have no compute host.
-#
-# Possible values:
-#
-# * -1 means unlimited
-# * Any integer >= 0 represents the maximum allowed
-#  (integer value)
-# Minimum value: -1
-#max_disk_devices_to_attach = -1
+username = nova
 
 
 [conductor]
@@ -4522,7 +4420,7 @@
 # Number of workers for OpenStack Conductor service. The default will be the
 # number of CPUs available.
 #  (integer value)
-#workers = <None>
+workers = 8
 
 
 [console]
@@ -4574,8 +4472,8 @@
 #token_ttl = 600
 
 
+
 [cors]
-
 #
 # From oslo.middleware
 #
@@ -4590,7 +4488,7 @@
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -4598,14 +4496,13 @@
 # Indicate which methods can be used during the actual request. (list value)
 #allow_methods = GET,PUT,POST,DELETE,PATCH
 
-# Indicate which header field names may be used during the actual request. (list
-# value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
 
 
 [database]
-connection = sqlite:////var/lib/nova/nova.sqlite
-
 #
 # From oslo.db
 #
@@ -4623,14 +4520,14 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://nova:opnfv_secret@192.168.10.23/nova?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
@@ -4647,9 +4544,10 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 # This option is deprecated for removal.
@@ -4658,17 +4556,19 @@
 # sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -4679,6 +4579,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -4695,8 +4596,8 @@
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
@@ -4718,14 +4619,6 @@
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
 
 
 [devices]
@@ -4813,7 +4706,7 @@
 #  (integer value)
 # Minimum value: 1
 # Deprecated group/name - [DEFAULT]/scheduler_host_subset_size
-#host_subset_size = 1
+host_subset_size = 30
 
 #
 # The number of instances that can be actively performing IO on a host.
@@ -4903,7 +4796,8 @@
 # * enabled_filters
 #  (multi valued)
 # Deprecated group/name - [DEFAULT]/scheduler_available_filters
-#available_filters = nova.scheduler.filters.all_filters
+available_filters = nova.scheduler.filters.all_filters
+available_filters = nova.scheduler.filters.pci_passthrough_filter.PciPassthroughFilter
 
 #
 # Filters that the scheduler will use.
@@ -4928,7 +4822,7 @@
 #   exception will be raised.
 #  (list value)
 # Deprecated group/name - [DEFAULT]/scheduler_default_filters
-#enabled_filters = RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
+enabled_filters = DifferentHostFilter,SameHostFilter,RetryFilter,AvailabilityZoneFilter,RamFilter,CoreFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter,PciPassthroughFilter,NUMATopologyFilter,AggregateInstanceExtraSpecsFilter
 
 #
 # Weighers that the scheduler will use.
@@ -5064,10 +4958,10 @@
 #
 # Possible values:
 #
-# * A non-negative integer or float value, where the value corresponds to
-#   weight multiplier for hosts with group soft affinity.
+# * An integer or float value, where the value corresponds to weight multiplier
+#   for hosts with group soft affinity. Only a positive value are meaningful, as
+#   negative values would make this behave as a soft anti-affinity weigher.
 #  (floating point value)
-# Minimum value: 0
 #soft_affinity_weight_multiplier = 1.0
 
 #
@@ -5075,10 +4969,11 @@
 #
 # Possible values:
 #
-# * A non-negative integer or float value, where the value corresponds to
-#   weight multiplier for hosts with group soft anti-affinity.
+# * An integer or float value, where the value corresponds to weight multiplier
+#   for hosts with group soft anti-affinity. Only a positive value are
+#   meaningful, as negative values would make this behave as a soft affinity
+#   weigher.
 #  (floating point value)
-# Minimum value: 0
 #soft_anti_affinity_weight_multiplier = 1.0
 
 #
@@ -5305,7 +5200,7 @@
 # "scheme://hostname:port[/path]"
 #   (i.e. "http://10.0.1.0:9292" or "https://my.glance.server/image").
 #  (list value)
-#api_servers = <None>
+api_servers = http://192.168.10.35:9292
 
 #
 # Enable glance operation retries.
@@ -5355,7 +5250,7 @@
 # * Both enable_certificate_validation and default_trusted_certificate_ids
 #   below depend on this option being enabled.
 #  (boolean value)
-#verify_glance_signatures = false
+verify_glance_signatures = true
 
 # DEPRECATED:
 # Enable certificate validation for image signature verification.
@@ -5490,10 +5385,7 @@
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response. Security note:
-# Enabling this option may expose sensitive details about the service being
-# monitored. Be sure to verify that it will not violate your security policies.
-# (boolean value)
+# Show more detailed information as part of the response (boolean value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that information
@@ -5830,167 +5722,6 @@
 #iscsi_initiator_list =
 
 
-[ironic]
-#
-# Configuration options for Ironic driver (Bare Metal).
-# If using the Ironic driver following options must be set:
-# * auth_type
-# * auth_url
-# * project_name
-# * username
-# * password
-# * project_domain_id or project_domain_name
-# * user_domain_id or user_domain_name
-
-#
-# From nova.conf
-#
-
-# DEPRECATED: URL override for the Ironic API endpoint. (uri value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Endpoint lookup uses the service catalog via common keystoneauth1
-# Adapter configuration options. In the current release, api_endpoint will
-# override this behavior, but will be ignored and/or removed in a future
-# release. To achieve the same result, use the endpoint_override option instead.
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
-#api_endpoint = http://ironic.example.org:6385/
-
-#
-# The number of times to retry when a request conflicts.
-# If set to 0, only try once, no retries.
-#
-# Related options:
-#
-# * api_retry_interval
-#  (integer value)
-# Minimum value: 0
-#api_max_retries = 60
-
-#
-# The number of seconds to wait before retrying the request.
-#
-# Related options:
-#
-# * api_max_retries
-#  (integer value)
-# Minimum value: 0
-#api_retry_interval = 2
-
-# Timeout (seconds) to wait for node serial console state changed. Set to 0 to
-# disable timeout. (integer value)
-# Minimum value: 0
-#serial_console_state_timeout = 10
-
-# Case-insensitive key to limit the set of nodes that may be managed by this
-# service to the set of nodes in Ironic which have a matching conductor_group
-# property. If unset, all available nodes will be eligible to be managed by this
-# service. Note that setting this to the empty string (``""``) will match the
-# default conductor group, and is different than leaving the option unset.
-# (string value)
-# Note: This option can be changed without restarting.
-#partition_key = <None>
-
-# List of hostnames for all nova-compute services (including this host) with
-# this partition_key config value. Nodes matching the partition_key value will
-# be distributed between all services specified here. If partition_key is unset,
-# this option is ignored. (list value)
-# Note: This option can be changed without restarting.
-#peer_list =
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [ironic]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# User ID (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [ironic]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# The default service_type for endpoint URL discovery. (string value)
-#service_type = baremetal
-
-# The default service_name for endpoint URL discovery. (string value)
-#service_name = <None>
-
-# List of interfaces, in order of preference, for endpoint URL. (list value)
-#valid_interfaces = internal,public
-
-# The default region_name for endpoint URL discovery. (string value)
-#region_name = <None>
-
-# Always use this endpoint URL for requests for this client. NOTE: The
-# unversioned endpoint should be specified here; to request a particular API
-# version, use the `version`, `min-version`, and/or `max-version` options.
-# (string value)
-# Deprecated group/name - [ironic]/api_endpoint
-#endpoint_override = <None>
 
 
 [key_manager]
@@ -6134,14 +5865,16 @@
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -6154,9 +5887,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -6169,8 +5903,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -6194,10 +5928,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -6207,33 +5942,29 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 
 # In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -6259,12 +5990,20 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
 # value)
-#enforce_token_bind = permissive
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
 
 # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
 # single algorithm or multiple. The algorithms are those supported by Python
@@ -6282,23 +6021,129 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = nova
 
 
 [libvirt]
@@ -6385,6 +6230,10 @@
 #
 # The choice of this type must match the underlying virtualization strategy
 # you have chosen for this host.
+#
+# Possible values:
+#
+# * See the predefined set of case-sensitive values.
 #
 # Related options:
 #
@@ -6501,7 +6350,7 @@
 #   single partition image
 #  (integer value)
 # Minimum value: -2
-#inject_partition = -2
+inject_partition = -1
 
 # DEPRECATED:
 # Enable a mouse cursor within a graphical VNC or SPICE sessions.
@@ -6523,25 +6372,8 @@
 #use_usb_tablet = true
 
 #
-# URI scheme used for live migration.
-#
-# Override the default libvirt live migration scheme (which is dependent on
-# virt_type). If this option is set to None, nova will automatically choose a
-# sensible default based on the hypervisor. It is not recommended that you
-# change
-# this unless you are very sure that hypervisor supports a particular scheme.
-#
-# Related options:
-#
-# * ``virt_type``: This option is meaningful only when ``virt_type`` is set to
-#   `kvm` or `qemu`.
-# * ``live_migration_uri``: If ``live_migration_uri`` value is not None, the
-#   scheme used for live migration is taken from ``live_migration_uri`` instead.
-#  (string value)
-#live_migration_scheme = <None>
-
-#
-# Target used for live migration traffic.
+# The IP address or hostname to be used as the target for live migration
+# traffic.
 #
 # If this option is set to None, the hostname of the migration target compute
 # node will be used.
@@ -6551,11 +6383,15 @@
 # traffic can then use this config option and avoids the impact on the
 # management network.
 #
+# Possible values:
+#
+# * A valid IP address or hostname, else None.
+#
 # Related options:
 #
 # * ``live_migration_tunnelled``: The live_migration_inbound_addr value is
 #   ignored if tunneling is enabled.
-#  (host address value)
+#  (string value)
 #live_migration_inbound_addr = <None>
 
 # DEPRECATED:
@@ -6592,6 +6428,24 @@
 # ``live_migration_scheme``
 # and ``live_migration_inbound_addr`` respectively.
 #live_migration_uri = <None>
+
+#
+# URI scheme used for live migration.
+#
+# Override the default libvirt live migration scheme (which is dependent on
+# virt_type). If this option is set to None, nova will automatically choose a
+# sensible default based on the hypervisor. It is not recommended that you
+# change
+# this unless you are very sure that hypervisor supports a particular scheme.
+#
+# Related options:
+#
+# * ``virt_type``: This option is meaningful only when ``virt_type`` is set to
+#   `kvm` or `qemu`.
+# * ``live_migration_uri``: If ``live_migration_uri`` value is not None, the
+#   scheme used for live migration is taken from ``live_migration_uri`` instead.
+#  (string value)
+#live_migration_scheme = <None>
 
 #
 # Enable tunnelled migration.
@@ -6671,28 +6525,24 @@
 # * live_migration_downtime_steps
 # * live_migration_downtime_delay
 #  (integer value)
-# Minimum value: 0
 # Note: This option can be changed without restarting.
 #live_migration_completion_timeout = 800
 
-#
-# This option will be used to determine what action will be taken against a
-# VM after ``live_migration_completion_timeout`` expires. By default, the live
-# migrate operation will be aborted after completion timeout. If it is set to
-# ``force_complete``, the compute service will either pause the VM or trigger
-# post-copy depending on if post copy is enabled and available
-# (``live_migration_permit_post_copy`` is set to True).
-#
-# Related options:
-#
-# * live_migration_completion_timeout
-# * live_migration_permit_post_copy
-#  (string value)
-# Possible values:
-# abort - <No description provided>
-# force_complete - <No description provided>
+# DEPRECATED:
+# Time to wait, in seconds, for migration to make forward progress in
+# transferring data before aborting the operation.
+#
+# Set to 0 to disable timeouts.
+#
+# This is deprecated, and now disabled by default because we have found serious
+# bugs in this feature that caused false live-migration timeout failures. This
+# feature will be removed or replaced in a future release.
+#  (integer value)
 # Note: This option can be changed without restarting.
-#live_migration_timeout_action = abort
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Serious bugs found in this feature.
+#live_migration_progress_timeout = 0
 
 #
 # This option allows nova to switch an on-going live migration to post-copy
@@ -6700,12 +6550,9 @@
 # migration is complete, therefore ensuring an upper bound on the memory that
 # needs to be transferred. Post-copy requires libvirt>=1.3.3 and QEMU>=2.5.0.
 #
-# When permitted, post-copy mode will be automatically activated if
-# we reach the timeout defined by ``live_migration_completion_timeout`` and
-# ``live_migration_timeout_action`` is set to 'force_complete'. Note if you
-# change to no timeout or choose to use 'abort',
-# i.e. ``live_migration_completion_timeout = 0``, then there will be no
-# automatic switch to post-copy.
+# When permitted, post-copy mode will be automatically activated if a
+# live-migration memory copy iteration does not make percentage increase of at
+# least 10% over the last iteration.
 #
 # The live-migration force complete API also uses post-copy when permitted. If
 # post-copy mode is not available, force complete falls back to pausing the VM
@@ -6717,8 +6564,7 @@
 #
 # Related options:
 #
-# * live_migration_permit_auto_converge
-# * live_migration_timeout_action
+#     * live_migration_permit_auto_converge
 #  (boolean value)
 #live_migration_permit_post_copy = false
 
@@ -6740,55 +6586,23 @@
 # Determine the snapshot image format when sending to the image service.
 #
 # If set, this decides what format is used when sending the snapshot to the
-# image service. If not set, defaults to same type as source image.
-#  (string value)
-# Possible values:
-# raw - RAW disk format
-# qcow2 - KVM default disk format
-# vmdk - VMWare default disk format
-# vdi - VirtualBox default disk format
+# image service.
+# If not set, defaults to same type as source image.
+#
+# Possible values:
+#
+# * ``raw``: RAW disk format
+# * ``qcow2``: KVM default disk format
+# * ``vmdk``: VMWare default disk format
+# * ``vdi``: VirtualBox default disk format
+# * If not set, defaults to same type as source image.
+#  (string value)
+# Possible values:
+# raw - <No description provided>
+# qcow2 - <No description provided>
+# vmdk - <No description provided>
+# vdi - <No description provided>
 #snapshot_image_format = <None>
-
-#
-# Use QEMU-native TLS encryption when live migrating.
-#
-# This option will allow both migration stream (guest RAM plus device
-# state) *and* disk stream to be transported over native TLS, i.e. TLS
-# support built into QEMU.
-#
-# Prerequisite: TLS environment is configured correctly on all relevant
-# Compute nodes.  This means, Certificate Authority (CA), server, client
-# certificates, their corresponding keys, and their file permisssions are
-# in place, and are validated.
-#
-# Notes:
-#
-# * To have encryption for migration stream and disk stream (also called:
-#   "block migration"), ``live_migration_with_native_tls`` is the
-#   preferred config attribute instead of ``live_migration_tunnelled``.
-#
-# * The ``live_migration_tunnelled`` will be deprecated in the long-term
-#   for two main reasons: (a) it incurs a huge performance penalty; and
-#   (b) it is not compatible with block migration.  Therefore, if your
-#   compute nodes have at least libvirt 4.4.0 and QEMU 2.11.0, it is
-#   strongly recommended to use ``live_migration_with_native_tls``.
-#
-# * The ``live_migration_tunnelled`` and
-#   ``live_migration_with_native_tls`` should not be used at the same
-#   time.
-#
-# * Unlike ``live_migration_tunnelled``, the
-#   ``live_migration_with_native_tls`` *is* compatible with block
-#   migration.  That is, with this option, NBD stream, over which disks
-#   are migrated to a target host, will be encrypted.
-#
-# Related options:
-#
-# ``live_migration_tunnelled``: This transports migration stream (but not
-# disk stream) over libvirtd.
-#
-#  (boolean value)
-#live_migration_with_native_tls = false
 
 #
 # Override the default disk prefix for the devices attached to an instance.
@@ -6817,8 +6631,18 @@
 #
 # Is used to set the CPU mode an instance should have.
 #
-# If ``virt_type="kvm|qemu"``, it will default to ``host-model``, otherwise it
-# will default to ``none``.
+# If virt_type="kvm|qemu", it will default to "host-model", otherwise it will
+# default to "none".
+#
+# Possible values:
+#
+# * ``host-model``: Clones the host CPU feature flags
+# * ``host-passthrough``: Use the host CPU model exactly
+# * ``custom``: Use a named CPU model
+# * ``none``: Don't set a specific CPU model. For instances with
+#   ``virt_type`` as KVM/QEMU, the default CPU model from QEMU will be used,
+#   which provides a basic set of CPU features that are compatible with most
+#   hosts.
 #
 # Related options:
 #
@@ -6827,12 +6651,10 @@
 #   will fail.
 #  (string value)
 # Possible values:
-# host-model - Clone the host CPU feature flags
-# host-passthrough - Use the host CPU model exactly
-# custom - Use the CPU model in ``[libvirt]cpu_model``
-# none - Don't set a specific CPU model. For instances with ``[libvirt]
-# virt_type`` as KVM/QEMU, the default CPU model from QEMU will be used, which
-# provides a basic set of CPU features that are compatible with most hosts
+# host-model - <No description provided>
+# host-passthrough - <No description provided>
+# custom - <No description provided>
+# none - <No description provided>
 #cpu_mode = <None>
 
 #
@@ -6996,43 +6818,30 @@
 
 # For qemu or KVM guests, set this option to specify a default machine type per
 # host architecture. You can find a list of supported machine types in your
-# environment by checking the output of the "virsh capabilities" command. The
+# environment by checking the output of the "virsh capabilities"command. The
 # format of the value for this config option is host-arch=machine-type. For
 # example: x86_64=machinetype1,armv7l=machinetype2 (list value)
 #hw_machine_type = <None>
 
-#
 # The data source used to the populate the host "serial" UUID exposed to guest
-# in the virtual BIOS. All choices except ``unique`` will change the serial when
-# migrating the instance to another host. Changing the choice of this option
-# will
-# also affect existing instances on this host once they are stopped and started
-# again. It is recommended to use the default choice (``unique``) since that
-# will
-# not change when an instance is migrated. However, if you have a need for
-# per-host serials in addition to per-instance serial numbers, then consider
-# restricting flavors via host aggregates.
-#  (string value)
-# Possible values:
-# none - A serial number entry is not added to the guest domain xml.
-# os - A UUID serial number is generated from the host ``/etc/machine-id`` file.
-# hardware - A UUID for the host hardware as reported by libvirt. This is
-# typically from the host SMBIOS data, unless it has been overridden in
-# ``libvirtd.conf``.
-# auto - Uses the "os" source if possible, else "hardware".
-# unique - Uses instance UUID as the serial number.
-#sysinfo_serial = unique
+# in the virtual BIOS. (string value)
+# Possible values:
+# none - <No description provided>
+# os - <No description provided>
+# hardware - <No description provided>
+# auto - <No description provided>
+#sysinfo_serial = auto
 
 # A number of seconds to memory usage statistics period. Zero or negative value
 # mean to disable memory usage statistics. (integer value)
 #mem_stats_period_seconds = 10
 
-# List of uid targets and ranges.Syntax is guest-uid:host-uid:count. Maximum of
-# 5 allowed. (list value)
+# List of uid targets and ranges.Syntax is guest-uid:host-uid:countMaximum of 5
+# allowed. (list value)
 #uid_maps =
 
-# List of guid targets and ranges.Syntax is guest-gid:host-gid:count. Maximum of
-# 5 allowed. (list value)
+# List of guid targets and ranges.Syntax is guest-gid:host-gid:countMaximum of 5
+# allowed. (list value)
 #gid_maps =
 
 # In a realtime host context vCPUs for guest will run in that scheduling
@@ -7120,9 +6929,8 @@
 #
 # Related options:
 #
-# * compute.use_cow_images
+# * virt.use_cow_images
 # * images_volume_group
-# * [workarounds]/ensure_libvirt_rbd_instance_dir_cleanup
 #  (string value)
 # Possible values:
 # raw - <No description provided>
@@ -7204,15 +7012,21 @@
 # Method used to wipe ephemeral disks when they are deleted. Only takes effect
 # if LVM is set as backing storage.
 #
+# Possible values:
+#
+# * none - do not wipe deleted volumes
+# * zero - overwrite volumes with zeroes
+# * shred - overwrite volume repeatedly
+#
 # Related options:
 #
 # * images_type - must be set to ``lvm``
 # * volume_clear_size
 #  (string value)
 # Possible values:
-# zero - Overwrite volumes with zeroes
-# shred - Overwrite volumes repeatedly
-# none - Do not wipe deleted volumes
+# none - <No description provided>
+# zero - <No description provided>
+# shred - <No description provided>
 #volume_clear = zero
 
 #
@@ -7524,6 +7338,52 @@
 #num_nvme_discover_tries = 5
 
 
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
 [metrics]
 #
 # Configuration options for metrics
@@ -7704,10 +7564,6 @@
 # Adapter configuration options. In the current release, "url" will override
 # this behavior, but will be ignored and/or removed in a future release. To
 # achieve the same result, use the endpoint_override option instead.
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #url = http://127.0.0.1:9696
 
 #
@@ -7784,7 +7640,7 @@
 #
 # * metadata_proxy_shared_secret
 #  (boolean value)
-#service_metadata_proxy = false
+service_metadata_proxy = true
 
 #
 # This option holds the shared secret string used to validate proxy requests to
@@ -7795,7 +7651,7 @@
 #
 # * service_metadata_proxy
 #  (string value)
-#metadata_proxy_shared_secret =
+metadata_proxy_shared_secret = opnfv_secret
 
 # PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # (string value)
@@ -7811,7 +7667,7 @@
 #insecure = false
 
 # Timeout value for http requests (integer value)
-#timeout = <None>
+timeout = 300
 
 # Collect per-API call timing information. (boolean value)
 #collect_timing = false
@@ -7821,13 +7677,13 @@
 
 # Authentication type to load (string value)
 # Deprecated group/name - [neutron]/auth_plugin
-#auth_type = <None>
+auth_type = v3password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
 # Authentication URL (string value)
-#auth_url = <None>
+auth_url = http://192.168.10.35:35357/v3
 
 # Scope for system operations (string value)
 #system_scope = <None>
@@ -7848,7 +7704,7 @@
 #project_domain_id = <None>
 
 # Domain name containing project (string value)
-#project_domain_name = <None>
+project_domain_name = Default
 
 # Trust ID (string value)
 #trust_id = <None>
@@ -7874,7 +7730,7 @@
 #user_domain_id = <None>
 
 # User's domain name (string value)
-#user_domain_name = <None>
+user_domain_name = Default
 
 # User's password (string value)
 #password = <None>
@@ -7903,6 +7759,11 @@
 # (string value)
 #endpoint_override = <None>
 
+password = opnfv_secret
+project_name = service
+username = neutron
+region_name = RegionOne
+
 
 [notifications]
 #
@@ -7922,16 +7783,23 @@
 # Please refer to
 # https://docs.openstack.org/nova/latest/reference/notifications.html for
 # additional information on notifications.
-#  (string value)
-# Possible values:
-# <None> - no notifications
-# vm_state - Notifications are sent with VM state transition information in the
-# ``old_state`` and ``state`` fields. The ``old_task_state`` and
-# ``new_task_state`` fields will be set to the current task_state of the
-# instance
-# vm_and_task_state - Notifications are sent with VM and task state transition
-# information
+#
+# Possible values:
+#
+# * None - no notifications
+# * "vm_state" - notifications are sent with VM state transition information in
+#   the ``old_state`` and ``state`` fields. The ``old_task_state`` and
+#   ``new_task_state`` fields will be set to the current task_state of the
+#   instance.
+# * "vm_and_task_state" - notifications are sent with VM and task state
+#   transition information.
+#  (string value)
+# Possible values:
+# <None> - <No description provided>
+# vm_state - <No description provided>
+# vm_and_task_state - <No description provided>
 #notify_on_state_change = <None>
+notify_on_state_change = vm_and_task_state
 
 # Default notification level for outgoing notifications. (string value)
 # Possible values:
@@ -7954,14 +7822,20 @@
 # Note that notifications can be completely disabled by setting ``driver=noop``
 # in the ``[oslo_messaging_notifications]`` group.
 #
+# Possible values:
+#
+# * unversioned: Only the legacy unversioned notifications are emitted.
+# * versioned: Only the new versioned notifications are emitted.
+# * both: Both the legacy unversioned and the new versioned notifications are
+#   emitted. (Default)
+#
 # The list of versioned notifications is visible in
 # https://docs.openstack.org/nova/latest/reference/notifications.html
 #  (string value)
 # Possible values:
-# both - Both the legacy unversioned and the new versioned notifications are
-# emitted
-# versioned - Only the new versioned notifications are emitted
-# unversioned - Only the legacy unversioned notifications are emitted
+# unversioned - <No description provided>
+# versioned - <No description provided>
+# both - <No description provided>
 #notification_format = both
 
 #
@@ -8028,264 +7902,16 @@
 #lock_path = <None>
 
 
-[oslo_messaging_amqp]
-
+[oslo_messaging_notifications]
 #
 # From oslo.messaging
 #
 
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver = messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -8301,15 +7927,14 @@
 # to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
 # (integer value)
 #retry = -1
-
-
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
 
 # Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
@@ -8318,24 +7943,6 @@
 # Connect over SSL. (boolean value)
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
@@ -8351,12 +7958,46 @@
 #kombu_missing_consumer_retry_timeout = 60
 
 # Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
 # Possible values:
 # round-robin - <No description provided>
 # shuffle - <No description provided>
 #kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
 
 # The RabbitMQ login method. (string value)
 # Possible values:
@@ -8365,6 +8006,12 @@
 # RABBIT-CR-DEMO - <No description provided>
 #rabbit_login_method = AMQPLAIN
 
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
 
@@ -8376,22 +8023,28 @@
 # (integer value)
 #rabbit_interval_max = 30
 
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
 # Minimum value: 1
 #rabbit_transient_queues_ttl = 1800
 
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
 #rabbit_qos_prefetch_count = 0
 
 # Number of seconds after which the Rabbit broker is considered down if
@@ -8399,13 +8052,16 @@
 # value)
 #heartbeat_timeout_threshold = 60
 
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
 #heartbeat_rate = 2
 
 
+
+[oslo_policy]
+
+
 [oslo_middleware]
-
 #
 # From oslo.middleware
 #
@@ -8416,8 +8072,8 @@
 #max_request_body_size = 114688
 
 # DEPRECATED: The HTTP Header that will be used to determine what the original
-# request protocol scheme was, even if it was hidden by a SSL termination proxy.
-# (string value)
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #secure_proxy_ssl_header = X-Forwarded-Proto
@@ -8425,53 +8081,8 @@
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
+enable_proxy_headers_parsing = True
+
 
 
 [pci]
@@ -8487,12 +8098,9 @@
 # without
 # needing to repeat all the PCI property requirements.
 #
-# This should be configured for the ``nova-api`` service and, assuming you wish
-# to use move operations, for each ``nova-compute`` service.
-#
 # Possible Values:
 #
-# * A dictionary of JSON values which describe the aliases. For example::
+# * A list of JSON values which describe the aliases. For example::
 #
 #     alias = {
 #       "name": "QuickAssist",
@@ -8521,24 +8129,6 @@
 #   ``numa_policy``
 #     Required NUMA affinity of device. Valid values are: ``legacy``,
 #     ``preferred`` and ``required``.
-#
-# * Supports multiple aliases by repeating the option (not by specifying
-#   a list value)::
-#
-#     alias = {
-#       "name": "QuickAssist-1",
-#       "product_id": "0443",
-#       "vendor_id": "8086",
-#       "device_type": "type-PCI",
-#       "numa_policy": "required"
-#     }
-#     alias = {
-#       "name": "QuickAssist-2",
-#       "product_id": "0444",
-#       "vendor_id": "8086",
-#       "device_type": "type-PCI",
-#       "numa_policy": "required"
-#     }
 #  (multi valued)
 # Deprecated group/name - [DEFAULT]/pci_alias
 #alias =
@@ -8624,7 +8214,6 @@
 
 
 [placement]
-os_region_name = openstack
 
 #
 # From nova.conf
@@ -8662,61 +8251,42 @@
 #  (string value)
 #incomplete_consumer_user_id = 00000000-0000-0000-0000-000000000000
 
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# List of interfaces, in order of preference, for endpoint URL. (list value)
+valid_interfaces = internal
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [placement]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -8728,45 +8298,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [placement]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
-
-# The default service_type for endpoint URL discovery. (string value)
-#service_type = placement
-
-# The default service_name for endpoint URL discovery. (string value)
-#service_name = <None>
-
-# List of interfaces, in order of preference, for endpoint URL. (list value)
-#valid_interfaces = internal,public
-
-# The default region_name for endpoint URL discovery. (string value)
-#region_name = <None>
-
-# Always use this endpoint URL for requests for this client. NOTE: The
-# unversioned endpoint should be specified here; to request a particular API
-# version, use the `version`, `min-version`, and/or `max-version` options.
-# (string value)
-#endpoint_override = <None>
+username = nova
 
 
 [placement_database]
@@ -8871,37 +8461,6 @@
 # failures.
 #  (string value)
 #volume_group_name =
-
-
-[privsep]
-# Configuration options for the oslo.privsep daemon. Note that this group name
-# can be changed by the consuming service. Check the service's docs to see if
-# this is the case.
-
-#
-# From oslo.privsep
-#
-
-# User that the privsep daemon should run as. (string value)
-#user = <None>
-
-# Group that the privsep daemon should run as. (string value)
-#group = <None>
-
-# List of Linux capabilities retained by the privsep daemon. (list value)
-#capabilities =
-
-# The number of threads available for privsep to concurrently run processes.
-# Defaults to the number of CPU cores in the system. (integer value)
-# Minimum value: 1
-#thread_pool_size = 4
-
-# Command to invoke to start the privsep daemon if not using the "fork" method.
-# If not specified, a default is generated using "sudo privsep-helper" and
-# arguments designed to recreate the current configuration. This command must
-# accept suitable --privsep_context and --privsep_sock_path arguments. (string
-# value)
-#helper_command = <None>
 
 
 [profiler]
@@ -9242,15 +8801,48 @@
 #server_group_members = 10
 
 #
+# The number of seconds until a reservation expires.
+#
+# This quota represents the time period for invalidating quota reservations.
+#  (integer value)
+#reservation_expire = 86400
+
+#
+# The count of reservations until usage is refreshed.
+#
+# This defaults to 0 (off) to avoid additional load but it is useful to turn on
+# to help keep quota usage up-to-date and reduce the impact of out of sync usage
+# issues.
+#  (integer value)
+# Minimum value: 0
+#until_refresh = 0
+
+#
+# The number of seconds between subsequent usage refreshes.
+#
+# This defaults to 0 (off) to avoid additional load but it is useful to turn on
+# to help keep quota usage up-to-date and reduce the impact of out of sync usage
+# issues. Note that quotas are not updated on a periodic task, they will update
+# on a new reservation if max_age has passed since the last reservation.
+#  (integer value)
+# Minimum value: 0
+#max_age = 0
+
+#
 # Provides abstraction for quota checks. Users can configure a specific
 # driver to use for quota checks.
-#  (string value)
-# Possible values:
-# nova.quota.DbQuotaDriver - Stores quota limit information in the database and
-# relies on the ``quota_*`` configuration options for default quota limit
-# values. Counts quota usage on-demand.
-# nova.quota.NoopQuotaDriver - Ignores quota and treats all resources as
-# unlimited.
+#
+# Possible values:
+#
+# * nova.quota.DbQuotaDriver: Stores quota limit information
+#   in the database and relies on the quota_* configuration options for default
+#   quota limit values. Counts quota usage on-demand.
+# * nova.quota.NoopQuotaDriver: Ignores quota and treats all resources as
+#   unlimited.
+#  (string value)
+# Possible values:
+# nova.quota.DbQuotaDriver - <No description provided>
+# nova.quota.NoopQuotaDriver - <No description provided>
 #driver = nova.quota.DbQuotaDriver
 
 #
@@ -9409,6 +9001,10 @@
 #
 # Other options are:
 #
+# * 'caching_scheduler' which aggressively caches the system state for better
+#   individual scheduler performance at the risk of more retries when running
+#   multiple schedulers. [DEPRECATED]
+# * 'chance_scheduler' which simply picks a host at random. [DEPRECATED]
 # * 'fake_scheduler' which is used for testing.
 #
 # Possible values:
@@ -9416,6 +9012,8 @@
 # * Any of the drivers included in Nova:
 #
 #   * filter_scheduler
+#   * caching_scheduler
+#   * chance_scheduler
 #   * fake_scheduler
 #
 # * You may also set this to the entry point name of a custom scheduler driver,
@@ -9435,8 +9033,8 @@
 #
 # This value controls how often (in seconds) to run periodic tasks in the
 # scheduler. The specific tasks that are run for each period are determined by
-# the particular scheduler being used. Currently there are no in-tree scheduler
-# driver that use this option.
+# the particular scheduler being used. Currently the only in-tree scheduler
+# driver that uses this option is the ``caching_scheduler``.
 #
 # If this is larger than the nova-service 'service_down_time' setting, the
 # ComputeFilter (if enabled) may think the compute service is down. As each
@@ -9586,8 +9184,7 @@
 #
 # Possible values:
 #
-# * Each string which passes the regex ``^\d+:\d+$`` For example
-# ``10000:20000``.
+# * Each string which passes the regex ``\d+:\d+`` For example ``10000:20000``.
 #   Be sure that the first port number is lower than the second port number
 #   and that both are in range from 0 to 65535.
 #  (string value)
@@ -9677,62 +9274,41 @@
 # middleware.
 #  (boolean value)
 #send_service_user_token = false
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+send_service_user_token = True
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_user]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://192.168.10.35:5000
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -9744,27 +9320,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [service_user]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
+username = nova
 
 
 [spice]
@@ -9835,6 +9449,7 @@
 #   and port where the ``nova-spicehtml5proxy`` service is listening.
 #  (uri value)
 #html5proxy_base_url = http://127.0.0.1:6082/spice_auto.html
+html5proxy_base_url = https://100.64.200.101:6080/spice_auto.html
 
 #
 # The  address where the SPICE server running on the instances should listen.
@@ -10103,15 +9718,6 @@
 # root token for vault (string value)
 #root_token_id = <None>
 
-# AppRole role_id for authentication with vault (string value)
-#approle_role_id = <None>
-
-# AppRole secret_id for authentication with vault (string value)
-#approle_secret_id = <None>
-
-# Mountpoint of KV store in Vault to use, for example: secret (string value)
-#kv_mountpoint = secret
-
 # Use this endpoint to connect to Vault, for example: "http://127.0.0.1:8200"
 # (string value)
 #vault_url = http://127.0.0.1:8200
@@ -10219,287 +9825,6 @@
 
 # Tenant Name (string value)
 #tenant_name = <None>
-
-
-[vmware]
-#
-# Related options:
-# Following options must be set in order to launch VMware-based
-# virtual machines.
-#
-# * compute_driver: Must use vmwareapi.VMwareVCDriver.
-# * vmware.host_username
-# * vmware.host_password
-# * vmware.cluster_name
-
-#
-# From nova.conf
-#
-
-#
-# This option specifies the physical ethernet adapter name for VLAN
-# networking.
-#
-# Set the vlan_interface configuration option to match the ESX host
-# interface that handles VLAN-tagged VM traffic.
-#
-# Possible values:
-#
-# * Any valid string representing VLAN interface name
-#  (string value)
-#vlan_interface = vmnic0
-
-#
-# This option should be configured only when using the NSX-MH Neutron
-# plugin. This is the name of the integration bridge on the ESXi server
-# or host. This should not be set for any other Neutron plugin. Hence
-# the default value is not set.
-#
-# Possible values:
-#
-# * Any valid string representing the name of the integration bridge
-#  (string value)
-#integration_bridge = <None>
-
-#
-# Set this value if affected by an increased network latency causing
-# repeated characters when typing in a remote console.
-#  (integer value)
-# Minimum value: 0
-#console_delay_seconds = <None>
-
-#
-# Identifies the remote system where the serial port traffic will
-# be sent.
-#
-# This option adds a virtual serial port which sends console output to
-# a configurable service URI. At the service URI address there will be
-# virtual serial port concentrator that will collect console logs.
-# If this is not set, no serial ports will be added to the created VMs.
-#
-# Possible values:
-#
-# * Any valid URI
-#  (string value)
-#serial_port_service_uri = <None>
-
-#
-# Identifies a proxy service that provides network access to the
-# serial_port_service_uri.
-#
-# Possible values:
-#
-# * Any valid URI (The scheme is 'telnet' or 'telnets'.)
-#
-# Related options:
-# This option is ignored if serial_port_service_uri is not specified.
-# * serial_port_service_uri
-#  (uri value)
-#serial_port_proxy_uri = <None>
-
-#
-# Specifies the directory where the Virtual Serial Port Concentrator is
-# storing console log files. It should match the 'serial_log_dir' config
-# value of VSPC.
-#  (string value)
-#serial_log_dir = /opt/vmware/vspc
-
-#
-# Hostname or IP address for connection to VMware vCenter host. (host address
-# value)
-#host_ip = <None>
-
-# Port for connection to VMware vCenter host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#host_port = 443
-
-# Username for connection to VMware vCenter host. (string value)
-#host_username = <None>
-
-# Password for connection to VMware vCenter host. (string value)
-#host_password = <None>
-
-#
-# Specifies the CA bundle file to be used in verifying the vCenter
-# server certificate.
-#  (string value)
-#ca_file = <None>
-
-#
-# If true, the vCenter server certificate is not verified. If false,
-# then the default CA truststore is used for verification.
-#
-# Related options:
-# * ca_file: This option is ignored if "ca_file" is set.
-#  (boolean value)
-#insecure = false
-
-# Name of a VMware Cluster ComputeResource. (string value)
-#cluster_name = <None>
-
-#
-# Regular expression pattern to match the name of datastore.
-#
-# The datastore_regex setting specifies the datastores to use with
-# Compute. For example, datastore_regex="nas.*" selects all the data
-# stores that have a name starting with "nas".
-#
-# NOTE: If no regex is given, it just picks the datastore with the
-# most freespace.
-#
-# Possible values:
-#
-# * Any matching regular expression to a datastore must be given
-#  (string value)
-#datastore_regex = <None>
-
-#
-# Time interval in seconds to poll remote tasks invoked on
-# VMware VC server.
-#  (floating point value)
-#task_poll_interval = 0.5
-
-#
-# Number of times VMware vCenter server API must be retried on connection
-# failures, e.g. socket error, etc.
-#  (integer value)
-# Minimum value: 0
-#api_retry_count = 10
-
-#
-# This option specifies VNC starting port.
-#
-# Every VM created by ESX host has an option of enabling VNC client
-# for remote connection. Above option 'vnc_port' helps you to set
-# default starting port for the VNC client.
-#
-# Possible values:
-#
-# * Any valid port number within 5900 -(5900 + vnc_port_total)
-#
-# Related options:
-# Below options should be set to enable VNC client.
-# * vnc.enabled = True
-# * vnc_port_total
-#  (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#vnc_port = 5900
-
-#
-# Total number of VNC ports.
-#  (integer value)
-# Minimum value: 0
-#vnc_port_total = 10000
-
-#
-# Keymap for VNC.
-#
-# The keyboard mapping (keymap) determines which keyboard layout a VNC
-# session should use by default.
-#
-# Possible values:
-#
-# * A keyboard layout which is supported by the underlying hypervisor on
-#   this node. This is usually an 'IETF language tag' (for example
-#   'en-us').
-#  (string value)
-#vnc_keymap = en-us
-
-#
-# This option enables/disables the use of linked clone.
-#
-# The ESX hypervisor requires a copy of the VMDK file in order to boot
-# up a virtual machine. The compute driver must download the VMDK via
-# HTTP from the OpenStack Image service to a datastore that is visible
-# to the hypervisor and cache it. Subsequent virtual machines that need
-# the VMDK use the cached version and don't have to copy the file again
-# from the OpenStack Image service.
-#
-# If set to false, even with a cached VMDK, there is still a copy
-# operation from the cache location to the hypervisor file directory
-# in the shared datastore. If set to true, the above copy operation
-# is avoided as it creates copy of the virtual machine that shares
-# virtual disks with its parent VM.
-#  (boolean value)
-#use_linked_clone = true
-
-#
-# This option sets the http connection pool size
-#
-# The connection pool size is the maximum number of connections from nova to
-# vSphere.  It should only be increased if there are warnings indicating that
-# the connection pool is full, otherwise, the default should suffice.
-#  (integer value)
-# Minimum value: 10
-#connection_pool_size = 10
-
-#
-# This option enables or disables storage policy based placement
-# of instances.
-#
-# Related options:
-#
-# * pbm_default_policy
-#  (boolean value)
-#pbm_enabled = false
-
-#
-# This option specifies the PBM service WSDL file location URL.
-#
-# Setting this will disable storage policy based placement
-# of instances.
-#
-# Possible values:
-#
-# * Any valid file path
-#   e.g file:///opt/SDK/spbm/wsdl/pbmService.wsdl
-#  (string value)
-#pbm_wsdl_location = <None>
-
-#
-# This option specifies the default policy to be used.
-#
-# If pbm_enabled is set and there is no defined storage policy for the
-# specific request, then this policy will be used.
-#
-# Possible values:
-#
-# * Any valid storage policy such as VSAN default storage policy
-#
-# Related options:
-#
-# * pbm_enabled
-#  (string value)
-#pbm_default_policy = <None>
-
-#
-# This option specifies the limit on the maximum number of objects to
-# return in a single result.
-#
-# A positive value will cause the operation to suspend the retrieval
-# when the count of objects reaches the specified limit. The server may
-# still limit the count to something less than the configured value.
-# Any remaining objects may be retrieved with additional requests.
-#  (integer value)
-# Minimum value: 0
-#maximum_objects = 100
-
-#
-# This option adds a prefix to the folder where cached images are stored
-#
-# This is not the full path - just a folder prefix. This should only be
-# used when a datastore cache is shared between compute nodes.
-#
-# Note: This should only be used when the compute nodes are running on same
-# host or they have a shared file system.
-#
-# Possible values:
-#
-# * Any string representing the cache prefix to the folder
-#  (string value)
-#cache_prefix = <None>
 
 
 [vnc]
@@ -10543,7 +9868,7 @@
 # keyboards. You should instead use a VNC client that supports Extended Key
 # Event
 # messages, such as noVNC 1.0.0. Refer to bug #1682020 for more information.
-#keymap = <None>
+keymap = en-us
 
 #
 # The IP address or hostname on which an instance should listen to for
@@ -10551,20 +9876,7 @@
 #  (host address value)
 # Deprecated group/name - [DEFAULT]/vncserver_listen
 # Deprecated group/name - [vnc]/vncserver_listen
-#server_listen = 127.0.0.1
-
-#
-# Private, internal IP address or hostname of VNC console proxy.
-#
-# The VNC proxy is an OpenStack component that enables compute service
-# users to access their instances through VNC clients.
-#
-# This option sets the private address to which proxy clients, such as
-# ``nova-novncproxy``, should connect to.
-#  (host address value)
-# Deprecated group/name - [DEFAULT]/vncserver_proxyclient_address
-# Deprecated group/name - [vnc]/vncserver_proxyclient_address
-#server_proxyclient_address = 127.0.0.1
+server_listen = 192.168.10.36
 
 #
 # Public address of noVNC VNC console proxy.
@@ -10585,9 +9897,9 @@
 # * novncproxy_host
 # * novncproxy_port
 #  (uri value)
-#novncproxy_base_url = http://127.0.0.1:6080/vnc_auto.html
-
-# DEPRECATED:
+novncproxy_base_url = https://100.64.200.101:6080/vnc_auto.html
+
+#
 # IP address or hostname that the XVP VNC console proxy should bind to.
 #
 # The VNC proxy is an OpenStack component that enables compute service
@@ -10604,14 +9916,9 @@
 # * xvpvncproxy_port
 # * xvpvncproxy_base_url
 #  (host address value)
-# This option is deprecated for removal since 19.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# The ``nova-xvpvnxproxy`` service is deprecated and will be removed in an
-# upcoming release.
 #xvpvncproxy_host = 0.0.0.0
 
-# DEPRECATED:
+#
 # Port that the XVP VNC console proxy should bind to.
 #
 # The VNC proxy is an OpenStack component that enables compute service
@@ -10630,14 +9937,9 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-# This option is deprecated for removal since 19.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# The ``nova-xvpvnxproxy`` service is deprecated and will be removed in an
-# upcoming release.
 #xvpvncproxy_port = 6081
 
-# DEPRECATED:
+#
 # Public URL address of XVP VNC console proxy.
 #
 # The VNC proxy is an OpenStack component that enables compute service
@@ -10655,11 +9957,6 @@
 # * xvpvncproxy_host
 # * xvpvncproxy_port
 #  (uri value)
-# This option is deprecated for removal since 19.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# The ``nova-xvpvnxproxy`` service is deprecated and will be removed in an
-# upcoming release.
 #xvpvncproxy_base_url = http://127.0.0.1:6081/console
 
 #
@@ -10677,7 +9974,7 @@
 # * novncproxy_port
 # * novncproxy_base_url
 #  (string value)
-#novncproxy_host = 0.0.0.0
+novncproxy_host = 192.168.10.36
 
 #
 # Port that the noVNC console proxy should bind to.
@@ -10696,59 +9993,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#novncproxy_port = 6080
-
-#
-# The authentication schemes to use with the compute node.
-#
-# Control what RFB authentication schemes are permitted for connections between
-# the proxy and the compute host. If multiple schemes are enabled, the first
-# matching scheme will be used, thus the strongest schemes should be listed
-# first.
-#
-# Related options:
-#
-# * ``[vnc]vencrypt_client_key``, ``[vnc]vencrypt_client_cert``: must also be
-# set
-#  (list value)
-#auth_schemes = none
-
-# The path to the client certificate PEM file (for x509)
-#
-# The fully qualified path to a PEM file containing the private key which the
-# VNC
-# proxy server presents to the compute node during VNC authentication.
-#
-# Related options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-# * ``vnc.vencrypt_client_cert``: must also be set
-#  (string value)
-#vencrypt_client_key = <None>
-
-# The path to the client key file (for x509)
-#
-# The fully qualified path to a PEM file containing the x509 certificate which
-# the VNC proxy server presents to the compute node during VNC authentication.
-#
-# Realted options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-# * ``vnc.vencrypt_client_key``: must also be set
-#  (string value)
-#vencrypt_client_cert = <None>
-
-# The path to the CA certificate PEM file
-#
-# The fully qualified path to a PEM file containing one or more x509
-# certificates
-# for the certificate authorities used by the compute node VNC server.
-#
-# Related options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-#  (string value)
-#vencrypt_ca_certs = <None>
+novncproxy_port = 6080
 
 
 [workarounds]
@@ -10782,7 +10027,7 @@
 #  (boolean value)
 #disable_rootwrap = false
 
-# DEPRECATED:
+#
 # Disable live snapshots when using the libvirt driver.
 #
 # Live snapshots allow the snapshot of the disk to happen without an
@@ -10805,13 +10050,7 @@
 # * False: Live snapshots are always used when snapshotting (as long as
 #   there is a new enough libvirt and the backend storage supports it)
 #  (boolean value)
-# This option is deprecated for removal since 19.0.0.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option was added to work around issues with libvirt 1.2.2. We no longer
-# support this version of libvirt, which means this workaround is no longer
-# necessary. It will be removed in a future release.
-#disable_libvirt_livesnapshot = false
+disable_libvirt_livesnapshot = true
 
 #
 # Enable handling of events emitted from compute drivers.
@@ -10834,7 +10073,8 @@
 # will have to be synchronized manually.
 #
 # For more information, refer to the bug report:
-# https://bugs.launchpad.net/bugs/1444630
+#
+#   https://bugs.launchpad.net/bugs/1444630
 #
 # Interdependencies to other options:
 #
@@ -10907,58 +10147,35 @@
 #enable_consoleauth = false
 
 #
-# Enable live migration of instances with NUMA topologies.
-#
-# Live migration of instances with NUMA topologies is disabled by default
-# when using the libvirt driver. This includes live migration of instances with
-# CPU pinning or hugepages. CPU pinning and huge page information for such
-# instances is not currently re-calculated, as noted in `bug #1289064`_.  This
-# means that if instances were already present on the destination host, the
-# migrated instance could be placed on the same dedicated cores as these
-# instances or use hugepages allocated for another instance. Alternately, if the
-# host platforms were not homogeneous, the instance could be assigned to
-# non-existent cores or be inadvertently split across host NUMA nodes.
-#
-# Despite these known issues, there may be cases where live migration is
-# necessary. By enabling this option, operators that are aware of the issues and
-# are willing to manually work around them can enable live migration support for
-# these instances.
-#
-# Related options:
-#
-# * ``compute_driver``: Only the libvirt driver is affected.
-#
-# .. _bug #1289064: https://bugs.launchpad.net/nova/+bug/1289064
+# Starting in the 16.0.0 Pike release, ironic nodes can be scheduled using
+# custom resource classes rather than the standard resource classes VCPU,
+# MEMORY_MB and DISK_GB:
+#
+# https://docs.openstack.org/ironic/rocky/install/configure-nova-flavors.html
+#
+# However, existing ironic instances require a data migration which can be
+# achieved either by restarting ``nova-compute`` services managing ironic nodes
+# or running ``nova-manage db ironic_flavor_migration``. The completion of the
+# data migration can be checked by running the ``nova-status upgrade check``
+# command and checking the "Ironic Flavor Migration" result.
+#
+# Once all data migrations are complete, you can set this option to False to
+# stop reporting VCPU, MEMORY_MB and DISK_GB resource class inventory to the
+# Placement service so that scheduling will only rely on the custom resource
+# class for each ironic node, as described in the document above.
+#
+# Note that this option does not apply starting in the 19.0.0 Stein release
+# since the ironic compute driver no longer reports standard resource class
+# inventory regardless of configuration.
+#
+# Alternatives to this workaround would be unsetting ``memory_mb`` and/or
+# ``vcpus`` properties from ironic nodes, or using host aggregates to segregate
+# VM from BM compute hosts and restrict flavors to those aggregates, but those
+# alternatives might not be feasible at large scale.
+#
+# See related bug https://bugs.launchpad.net/nova/+bug/1796920 for more details.
 #  (boolean value)
-#enable_numa_live_migration = false
-
-#
-# Ensure the instance directory is removed during clean up when using rbd.
-#
-# When enabled this workaround will ensure that the instance directory is always
-# removed during cleanup on hosts using ``[libvirt]/images_type=rbd``. This
-# avoids the following bugs with evacuation and revert resize clean up that lead
-# to the instance directory remaining on the host:
-#
-# https://bugs.launchpad.net/nova/+bug/1414895
-#
-# https://bugs.launchpad.net/nova/+bug/1761062
-#
-# Both of these bugs can then result in ``DestinationDiskExists`` errors being
-# raised if the instances ever attempt to return to the host.
-#
-# .. warning:: Operators will need to ensure that the instance directory itself,
-#   specified by ``[DEFAULT]/instances_path``, is not shared between computes
-#   before enabling this workaround otherwise the console.log, kernels, ramdisks
-#   and any additional files being used by the running instance will be lost.
-#
-# Related options:
-#
-# * ``compute_driver`` (libvirt)
-# * ``[libvirt]/images_type`` (rbd)
-# * ``instances_path``
-#  (boolean value)
-#ensure_libvirt_rbd_instance_dir_cleanup = false
+#report_ironic_standard_resource_class_inventory = true
 
 
 [wsgi]
@@ -10990,7 +10207,7 @@
 #
 # Possible values:
 #
-# * '%(client_ip)s "%(request_line)s" status: %(status_code)s '
+# * '%(client_ip)s "%(request_line)s" status: %(status_code)s'
 #   'len: %(body_length)s time: %(wall_seconds).7f' (default)
 # * Any formatted string formed by specific values.
 #  (string value)
@@ -11279,12 +10496,18 @@
 # here. Configuring a value other than these will default to 'all'.
 #
 # Note: There is nothing that deletes these images.
-#  (string value)
-# Possible values:
-# all - Will cache all images
-# some - Will only cache images that have the image_property
-# ``cache_in_nova=True``
-# none - Turns off caching entirely
+#
+# Possible values:
+#
+# * `all`: will cache all images.
+# * `some`: will only cache images that have the
+#   image_property `cache_in_nova=True`.
+# * `none`: turns off caching entirely.
+#  (string value)
+# Possible values:
+# all - <No description provided>
+# some - <No description provided>
+# none - <No description provided>
 #cache_images = all
 
 #
@@ -11548,21 +10771,26 @@
 #
 # Provide a short name representing an image driver required to
 # handle the image between compute host and glance.
-#  (string value)
-# Possible values:
-# direct_vhd - This plugin directly processes the VHD files in XenServer
-# SR(Storage Repository). So this plugin only works when the host's SR type is
-# file system based e.g. ext, nfs.
-# vdi_local_dev - This plugin implements an image handler which attaches the
-# instance's VDI as a local disk to the VM where the OpenStack Compute service
-# runs. It uploads the raw disk to glance when creating image; when booting an
-# instance from a glance image, it downloads the image and streams it into the
-# disk which is attached to the compute VM.
-# vdi_remote_stream - This plugin implements an image handler which works as a
-# proxy between glance and XenServer. The VHD streams to XenServer via a remote
-# import API supplied by XAPI for image download; and for image upload, the VHD
-# streams from XenServer via a remote export API supplied by XAPI. This plugin
-# works for all SR types supported by XenServer.
+#
+# Description for the allowed values:
+# * ``direct_vhd``: This plugin directly processes the VHD files in XenServer
+# SR(Storage Repository). So this plugin only works when the host's SR
+# type is file system based e.g. ext, nfs.
+# * ``vdi_local_dev``: This plugin implements an image handler which attaches
+# the instance's VDI as a local disk to the VM where the OpenStack Compute
+# service runs in. It uploads the raw disk to glance when creating image;
+# When booting an instance from a glance image, it downloads the image and
+# streams it into the disk which is attached to the compute VM.
+# * ``vdi_remote_stream``: This plugin implements an image handler which works
+# as a proxy between glance and XenServer. The VHD streams to XenServer via
+# a remote import API supplied by XAPI for image download; and for image
+# upload, the VHD streams from XenServer via a remote export API supplied
+# by XAPI. This plugin works for all SR types supported by XenServer.
+#  (string value)
+# Possible values:
+# direct_vhd - <No description provided>
+# vdi_local_dev - <No description provided>
+# vdi_remote_stream - <No description provided>
 #image_handler = direct_vhd
 
 #
@@ -11611,10 +10839,6 @@
 #
 # * Current hostname (default) or any string representing hostname.
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #console_public_hostname = <current_hostname>
 
 
@@ -11662,10 +10886,6 @@
 #
 # URL to be used to communicate with z/VM Cloud Connector.
 #  (uri value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #cloud_connector_url = http://zvm.example.org:8080/
 
 #
@@ -11685,10 +10905,6 @@
 # Possible values:
 #     A file system path on the host running the compute service.
 #  (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #image_tmp_path = $state_path/images
 
 #

2020-01-15 02:31:11,412 [salt.state       :1951][INFO    ][18656] Completed state [/etc/nova/nova.conf] at time 02:31:11.412581 duration_in_ms=775.416
2020-01-15 02:31:11,414 [salt.state       :1780][INFO    ][18656] Running state [nova-manage api_db sync] at time 02:31:11.414222
2020-01-15 02:31:11,414 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [nova-manage api_db sync]
2020-01-15 02:31:11,415 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage api_db sync' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:31:18,171 [salt.state       :300 ][INFO    ][18656] {'pid': 24680, 'retcode': 0, 'stderr': '', 'stdout': '2020-01-15 02:31:14.990 24682 INFO migrate.versioning.api [-] 0 -> 1... \x1b[00m\n2020-01-15 02:31:15.038 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.039 24682 INFO migrate.versioning.api [-] 1 -> 2... \x1b[00m\n2020-01-15 02:31:15.110 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.110 24682 INFO migrate.versioning.api [-] 2 -> 3... \x1b[00m\n2020-01-15 02:31:15.170 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.171 24682 INFO migrate.versioning.api [-] 3 -> 4... \x1b[00m\n2020-01-15 02:31:15.220 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.221 24682 INFO migrate.versioning.api [-] 4 -> 5... \x1b[00m\n2020-01-15 02:31:15.322 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.323 24682 INFO migrate.versioning.api [-] 5 -> 6... \x1b[00m\n2020-01-15 02:31:15.388 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.389 24682 INFO migrate.versioning.api [-] 6 -> 7... \x1b[00m\n2020-01-15 02:31:15.446 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.447 24682 INFO migrate.versioning.api [-] 7 -> 8... \x1b[00m\n2020-01-15 02:31:15.464 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.465 24682 INFO migrate.versioning.api [-] 8 -> 9... \x1b[00m\n2020-01-15 02:31:15.482 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.483 24682 INFO migrate.versioning.api [-] 9 -> 10... \x1b[00m\n2020-01-15 02:31:15.502 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.502 24682 INFO migrate.versioning.api [-] 10 -> 11... \x1b[00m\n2020-01-15 02:31:15.522 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.522 24682 INFO migrate.versioning.api [-] 11 -> 12... \x1b[00m\n2020-01-15 02:31:15.541 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.541 24682 INFO migrate.versioning.api [-] 12 -> 13... \x1b[00m\n2020-01-15 02:31:15.641 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.641 24682 INFO migrate.versioning.api [-] 13 -> 14... \x1b[00m\n2020-01-15 02:31:15.669 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.669 24682 INFO migrate.versioning.api [-] 14 -> 15... \x1b[00m\n2020-01-15 02:31:15.785 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.785 24682 INFO migrate.versioning.api [-] 15 -> 16... \x1b[00m\n2020-01-15 02:31:15.953 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:15.953 24682 INFO migrate.versioning.api [-] 16 -> 17... \x1b[00m\n2020-01-15 02:31:16.078 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.079 24682 INFO migrate.versioning.api [-] 17 -> 18... \x1b[00m\n2020-01-15 02:31:16.235 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.236 24682 INFO migrate.versioning.api [-] 18 -> 19... \x1b[00m\n2020-01-15 02:31:16.315 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.316 24682 INFO migrate.versioning.api [-] 19 -> 20... \x1b[00m\n2020-01-15 02:31:16.403 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.403 24682 INFO migrate.versioning.api [-] 20 -> 21... \x1b[00m\n2020-01-15 02:31:16.413 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.413 24682 INFO migrate.versioning.api [-] 21 -> 22... \x1b[00m\n2020-01-15 02:31:16.424 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.425 24682 INFO migrate.versioning.api [-] 22 -> 23... \x1b[00m\n2020-01-15 02:31:16.434 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.435 24682 INFO migrate.versioning.api [-] 23 -> 24... \x1b[00m\n2020-01-15 02:31:16.447 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.447 24682 INFO migrate.versioning.api [-] 24 -> 25... \x1b[00m\n2020-01-15 02:31:16.462 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.462 24682 INFO migrate.versioning.api [-] 25 -> 26... \x1b[00m\n2020-01-15 02:31:16.495 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.495 24682 INFO migrate.versioning.api [-] 26 -> 27... \x1b[00m\n2020-01-15 02:31:16.795 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.796 24682 INFO migrate.versioning.api [-] 27 -> 28... \x1b[00m\n2020-01-15 02:31:16.833 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.833 24682 INFO migrate.versioning.api [-] 28 -> 29... \x1b[00m\n2020-01-15 02:31:16.870 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.870 24682 INFO migrate.versioning.api [-] 29 -> 30... \x1b[00m\n2020-01-15 02:31:16.892 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.892 24682 INFO migrate.versioning.api [-] 30 -> 31... \x1b[00m\n2020-01-15 02:31:16.904 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.905 24682 INFO migrate.versioning.api [-] 31 -> 32... \x1b[00m\n2020-01-15 02:31:16.917 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.917 24682 INFO migrate.versioning.api [-] 32 -> 33... \x1b[00m\n2020-01-15 02:31:16.929 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.929 24682 INFO migrate.versioning.api [-] 33 -> 34... \x1b[00m\n2020-01-15 02:31:16.946 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.946 24682 INFO migrate.versioning.api [-] 34 -> 35... \x1b[00m\n2020-01-15 02:31:16.958 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.958 24682 INFO migrate.versioning.api [-] 35 -> 36... \x1b[00m\n2020-01-15 02:31:16.970 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.970 24682 INFO migrate.versioning.api [-] 36 -> 37... \x1b[00m\n2020-01-15 02:31:16.982 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.982 24682 INFO migrate.versioning.api [-] 37 -> 38... \x1b[00m\n2020-01-15 02:31:16.994 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:16.994 24682 INFO migrate.versioning.api [-] 38 -> 39... \x1b[00m\n2020-01-15 02:31:17.006 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.006 24682 INFO migrate.versioning.api [-] 39 -> 40... \x1b[00m\n2020-01-15 02:31:17.018 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.018 24682 INFO migrate.versioning.api [-] 40 -> 41... \x1b[00m\n2020-01-15 02:31:17.082 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.082 24682 INFO migrate.versioning.api [-] 41 -> 42... \x1b[00m\n2020-01-15 02:31:17.121 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.121 24682 INFO migrate.versioning.api [-] 42 -> 43... \x1b[00m\n2020-01-15 02:31:17.168 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.169 24682 INFO migrate.versioning.api [-] 43 -> 44... \x1b[00m\n2020-01-15 02:31:17.266 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.267 24682 INFO migrate.versioning.api [-] 44 -> 45... \x1b[00m\n2020-01-15 02:31:17.279 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.280 24682 INFO migrate.versioning.api [-] 45 -> 46... \x1b[00m\n2020-01-15 02:31:17.293 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.294 24682 INFO migrate.versioning.api [-] 46 -> 47... \x1b[00m\n2020-01-15 02:31:17.305 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.305 24682 INFO migrate.versioning.api [-] 47 -> 48... \x1b[00m\n2020-01-15 02:31:17.317 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.317 24682 INFO migrate.versioning.api [-] 48 -> 49... \x1b[00m\n2020-01-15 02:31:17.329 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.329 24682 INFO migrate.versioning.api [-] 49 -> 50... \x1b[00m\n2020-01-15 02:31:17.364 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.364 24682 INFO migrate.versioning.api [-] 50 -> 51... \x1b[00m\n2020-01-15 02:31:17.485 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.485 24682 INFO migrate.versioning.api [-] 51 -> 52... \x1b[00m\n2020-01-15 02:31:17.522 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.522 24682 INFO migrate.versioning.api [-] 52 -> 53... \x1b[00m\n2020-01-15 02:31:17.534 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.535 24682 INFO migrate.versioning.api [-] 53 -> 54... \x1b[00m\n2020-01-15 02:31:17.546 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.546 24682 INFO migrate.versioning.api [-] 54 -> 55... \x1b[00m\n2020-01-15 02:31:17.558 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.558 24682 INFO migrate.versioning.api [-] 55 -> 56... \x1b[00m\n2020-01-15 02:31:17.570 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.570 24682 INFO migrate.versioning.api [-] 56 -> 57... \x1b[00m\n2020-01-15 02:31:17.581 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.581 24682 INFO migrate.versioning.api [-] 57 -> 58... \x1b[00m\n2020-01-15 02:31:17.623 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.624 24682 INFO migrate.versioning.api [-] 58 -> 59... \x1b[00m\n2020-01-15 02:31:17.666 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.667 24682 INFO migrate.versioning.api [-] 59 -> 60... \x1b[00m\n2020-01-15 02:31:17.704 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.704 24682 INFO migrate.versioning.api [-] 60 -> 61... \x1b[00m\n2020-01-15 02:31:17.751 24682 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:31:17.752 24682 INFO migrate.versioning.api [-] 61 -> 62... \x1b[00m\n2020-01-15 02:31:17.803 24682 INFO migrate.versioning.api [-] done\x1b[00m'}
2020-01-15 02:31:18,173 [salt.state       :1951][INFO    ][18656] Completed state [nova-manage api_db sync] at time 02:31:18.173606 duration_in_ms=6759.383
2020-01-15 02:31:18,176 [salt.state       :1780][INFO    ][18656] Running state [nova-manage cell_v2 map_cell0] at time 02:31:18.176014
2020-01-15 02:31:18,176 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [nova-manage cell_v2 map_cell0]
2020-01-15 02:31:18,177 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage cell_v2 map_cell0' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:31:22,283 [salt.state       :300 ][INFO    ][18656] {'pid': 24859, 'retcode': 0, 'stderr': '', 'stdout': ''}
2020-01-15 02:31:22,285 [salt.state       :1951][INFO    ][18656] Completed state [nova-manage cell_v2 map_cell0] at time 02:31:22.285487 duration_in_ms=4109.471
2020-01-15 02:31:22,290 [salt.state       :1780][INFO    ][18656] Running state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 02:31:22.290765
2020-01-15 02:31:22,291 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [nova-manage cell_v2 create_cell --name=cell1 --verbose]
2020-01-15 02:31:22,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage cell_v2 list_cells | grep cell1' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:31:24,442 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023124427451
2020-01-15 02:31:24,468 [salt.minion      :1432][INFO    ][24922] Starting a new job with PID 24922
2020-01-15 02:31:24,515 [salt.minion      :1711][INFO    ][24922] Returning information for job: 20200115023124427451
2020-01-15 02:31:26,627 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage cell_v2 create_cell --name=cell1 --verbose' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:31:31,032 [salt.state       :300 ][INFO    ][18656] {'pid': 24959, 'retcode': 0, 'stderr': '', 'stdout': 'abc718f7-cb51-4fc4-81cb-77e8326c8928'}
2020-01-15 02:31:31,033 [salt.state       :1951][INFO    ][18656] Completed state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 02:31:31.033465 duration_in_ms=8742.701
2020-01-15 02:31:31,035 [salt.state       :1780][INFO    ][18656] Running state [nova-manage db sync] at time 02:31:31.035019
2020-01-15 02:31:31,035 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [nova-manage db sync]
2020-01-15 02:31:31,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage db sync' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:31:54,565 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023154552620
2020-01-15 02:31:54,585 [salt.minion      :1432][INFO    ][25106] Starting a new job with PID 25106
2020-01-15 02:31:54,613 [salt.minion      :1711][INFO    ][25106] Returning information for job: 20200115023154552620
2020-01-15 02:32:13,767 [salt.state       :300 ][INFO    ][18656] {'pid': 24999, 'retcode': 0, 'stderr': '/usr/lib/python3/dist-packages/pymysql/cursors.py:165: Warning: (1831, "Duplicate index \'block_device_mapping_instance_uuid_virtual_name_device_name_idx\' defined on the table \'nova_cell0.block_device_mapping\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python3/dist-packages/pymysql/cursors.py:165: Warning: (1831, "Duplicate index \'uniq_instances0uuid\' defined on the table \'nova_cell0.instances\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python3/dist-packages/pymysql/cursors.py:165: Warning: (1831, "Duplicate index \'block_device_mapping_instance_uuid_virtual_name_device_name_idx\' defined on the table \'nova.block_device_mapping\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python3/dist-packages/pymysql/cursors.py:165: Warning: (1831, "Duplicate index \'uniq_instances0uuid\' defined on the table \'nova.instances\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)', 'stdout': '2020-01-15 02:31:35.156 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 215 -> 216... \x1b[00m\n2020-01-15 02:31:42.049 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.050 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 216 -> 217... \x1b[00m\n2020-01-15 02:31:42.072 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.072 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 217 -> 218... \x1b[00m\n2020-01-15 02:31:42.094 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.095 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 218 -> 219... \x1b[00m\n2020-01-15 02:31:42.113 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.114 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 219 -> 220... \x1b[00m\n2020-01-15 02:31:42.137 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.138 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 220 -> 221... \x1b[00m\n2020-01-15 02:31:42.155 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.155 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 221 -> 222... \x1b[00m\n2020-01-15 02:31:42.169 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.170 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 222 -> 223... \x1b[00m\n2020-01-15 02:31:42.184 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.184 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 223 -> 224... \x1b[00m\n2020-01-15 02:31:42.198 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.199 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 224 -> 225... \x1b[00m\n2020-01-15 02:31:42.212 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.212 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 225 -> 226... \x1b[00m\n2020-01-15 02:31:42.225 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.226 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 226 -> 227... \x1b[00m\n2020-01-15 02:31:42.247 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.247 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 227 -> 228... \x1b[00m\n2020-01-15 02:31:42.316 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.317 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 228 -> 229... \x1b[00m\n2020-01-15 02:31:42.384 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.384 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 229 -> 230... \x1b[00m\n2020-01-15 02:31:42.528 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.529 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 230 -> 231... \x1b[00m\n2020-01-15 02:31:42.735 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:42.735 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 231 -> 232... \x1b[00m\n2020-01-15 02:31:43.507 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.508 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 232 -> 233... \x1b[00m\n2020-01-15 02:31:43.741 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.742 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 233 -> 234... \x1b[00m\n2020-01-15 02:31:43.815 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.815 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 234 -> 235... \x1b[00m\n2020-01-15 02:31:43.838 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.839 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 235 -> 236... \x1b[00m\n2020-01-15 02:31:43.861 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.862 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 236 -> 237... \x1b[00m\n2020-01-15 02:31:43.887 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.888 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 237 -> 238... \x1b[00m\n2020-01-15 02:31:43.910 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.911 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 238 -> 239... \x1b[00m\n2020-01-15 02:31:43.933 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.934 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 239 -> 240... \x1b[00m\n2020-01-15 02:31:43.954 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.955 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 240 -> 241... \x1b[00m\n2020-01-15 02:31:43.976 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.977 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 241 -> 242... \x1b[00m\n2020-01-15 02:31:43.998 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:43.999 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 242 -> 243... \x1b[00m\n2020-01-15 02:31:44.020 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:44.021 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 243 -> 244... \x1b[00m\n2020-01-15 02:31:44.106 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:44.107 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 244 -> 245... \x1b[00m\n2020-01-15 02:31:44.564 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:44.565 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 245 -> 246... \x1b[00m\n2020-01-15 02:31:44.685 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:44.686 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 246 -> 247... \x1b[00m\n2020-01-15 02:31:45.012 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.013 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 247 -> 248... \x1b[00m\n2020-01-15 02:31:45.037 25002 INFO 248_add_expire_reservations_index [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] Skipped adding reservations_deleted_expire_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:31:45.057 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.058 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 248 -> 249... \x1b[00m\n2020-01-15 02:31:45.142 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.143 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 249 -> 250... \x1b[00m\n2020-01-15 02:31:45.206 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.206 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 250 -> 251... \x1b[00m\n2020-01-15 02:31:45.275 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.276 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 251 -> 252... \x1b[00m\n2020-01-15 02:31:45.402 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.403 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 252 -> 253... \x1b[00m\n2020-01-15 02:31:45.487 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.488 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 253 -> 254... \x1b[00m\n2020-01-15 02:31:45.629 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.630 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 254 -> 255... \x1b[00m\n2020-01-15 02:31:45.654 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.654 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 255 -> 256... \x1b[00m\n2020-01-15 02:31:45.677 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.678 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 256 -> 257... \x1b[00m\n2020-01-15 02:31:45.701 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.702 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 257 -> 258... \x1b[00m\n2020-01-15 02:31:45.725 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.726 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 258 -> 259... \x1b[00m\n2020-01-15 02:31:45.748 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.748 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 259 -> 260... \x1b[00m\n2020-01-15 02:31:45.771 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.772 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 260 -> 261... \x1b[00m\n2020-01-15 02:31:45.794 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.795 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 261 -> 262... \x1b[00m\n2020-01-15 02:31:45.818 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.819 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 262 -> 263... \x1b[00m\n2020-01-15 02:31:45.841 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.842 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 263 -> 264... \x1b[00m\n2020-01-15 02:31:45.864 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.865 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 264 -> 265... \x1b[00m\n2020-01-15 02:31:45.986 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:45.987 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 265 -> 266... \x1b[00m\n2020-01-15 02:31:46.067 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:46.068 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 266 -> 267... \x1b[00m\n2020-01-15 02:31:46.851 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:46.852 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 267 -> 268... \x1b[00m\n2020-01-15 02:31:47.023 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.025 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 268 -> 269... \x1b[00m\n2020-01-15 02:31:47.159 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.159 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 269 -> 270... \x1b[00m\n2020-01-15 02:31:47.230 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.231 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 270 -> 271... \x1b[00m\n2020-01-15 02:31:47.398 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.398 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 271 -> 272... \x1b[00m\n2020-01-15 02:31:47.412 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.412 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 272 -> 273... \x1b[00m\n2020-01-15 02:31:47.425 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.426 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 273 -> 274... \x1b[00m\n2020-01-15 02:31:47.476 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.476 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 274 -> 275... \x1b[00m\n2020-01-15 02:31:47.567 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.567 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 275 -> 276... \x1b[00m\n2020-01-15 02:31:47.704 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.705 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 276 -> 277... \x1b[00m\n2020-01-15 02:31:47.791 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.792 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 277 -> 278... \x1b[00m\n2020-01-15 02:31:47.994 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:47.995 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 278 -> 279... \x1b[00m\n2020-01-15 02:31:48.081 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.082 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 279 -> 280... \x1b[00m\n2020-01-15 02:31:48.180 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.180 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 280 -> 281... \x1b[00m\n2020-01-15 02:31:48.193 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.193 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 281 -> 282... \x1b[00m\n2020-01-15 02:31:48.206 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.206 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 282 -> 283... \x1b[00m\n2020-01-15 02:31:48.219 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.219 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 283 -> 284... \x1b[00m\n2020-01-15 02:31:48.232 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.232 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 284 -> 285... \x1b[00m\n2020-01-15 02:31:48.245 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.245 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 285 -> 286... \x1b[00m\n2020-01-15 02:31:48.260 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.261 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 286 -> 287... \x1b[00m\n2020-01-15 02:31:48.273 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.274 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 287 -> 288... \x1b[00m\n2020-01-15 02:31:48.287 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.287 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 288 -> 289... \x1b[00m\n2020-01-15 02:31:48.300 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.300 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 289 -> 290... \x1b[00m\n2020-01-15 02:31:48.313 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.314 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 290 -> 291... \x1b[00m\n2020-01-15 02:31:48.355 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.355 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 291 -> 292... \x1b[00m\n2020-01-15 02:31:48.530 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.530 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 292 -> 293... \x1b[00m\n2020-01-15 02:31:48.670 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.671 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 293 -> 294... \x1b[00m\n2020-01-15 02:31:48.798 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.799 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 294 -> 295... \x1b[00m\n2020-01-15 02:31:48.885 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.885 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 295 -> 296... \x1b[00m\n2020-01-15 02:31:48.909 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:48.910 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 296 -> 297... \x1b[00m\n2020-01-15 02:31:49.083 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.084 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 297 -> 298... \x1b[00m\n2020-01-15 02:31:49.155 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.156 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 298 -> 299... \x1b[00m\n2020-01-15 02:31:49.230 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.231 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 299 -> 300... \x1b[00m\n2020-01-15 02:31:49.298 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.298 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 300 -> 301... \x1b[00m\n2020-01-15 02:31:49.396 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.397 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 301 -> 302... \x1b[00m\n2020-01-15 02:31:49.410 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.410 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 302 -> 303... \x1b[00m\n2020-01-15 02:31:49.424 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.425 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 303 -> 304... \x1b[00m\n2020-01-15 02:31:49.438 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.439 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 304 -> 305... \x1b[00m\n2020-01-15 02:31:49.453 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.453 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 305 -> 306... \x1b[00m\n2020-01-15 02:31:49.467 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.467 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 306 -> 307... \x1b[00m\n2020-01-15 02:31:49.481 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.481 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 307 -> 308... \x1b[00m\n2020-01-15 02:31:49.493 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.494 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 308 -> 309... \x1b[00m\n2020-01-15 02:31:49.507 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.507 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 309 -> 310... \x1b[00m\n2020-01-15 02:31:49.523 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.523 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 310 -> 311... \x1b[00m\n2020-01-15 02:31:49.539 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.540 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 311 -> 312... \x1b[00m\n2020-01-15 02:31:49.558 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.559 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 312 -> 313... \x1b[00m\n2020-01-15 02:31:49.698 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:49.699 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 313 -> 314... \x1b[00m\n2020-01-15 02:31:50.056 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:50.057 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 314 -> 315... \x1b[00m\n2020-01-15 02:31:50.469 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:50.470 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 315 -> 316... \x1b[00m\n2020-01-15 02:31:50.592 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:50.593 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 316 -> 317... \x1b[00m\n2020-01-15 02:31:50.700 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:50.701 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 317 -> 318... \x1b[00m\n2020-01-15 02:31:51.244 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.245 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 318 -> 319... \x1b[00m\n2020-01-15 02:31:51.295 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.295 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 319 -> 320... \x1b[00m\n2020-01-15 02:31:51.306 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.307 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 320 -> 321... \x1b[00m\n2020-01-15 02:31:51.318 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.319 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 321 -> 322... \x1b[00m\n2020-01-15 02:31:51.331 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.331 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 322 -> 323... \x1b[00m\n2020-01-15 02:31:51.343 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.343 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 323 -> 324... \x1b[00m\n2020-01-15 02:31:51.361 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.362 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 324 -> 325... \x1b[00m\n2020-01-15 02:31:51.375 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.376 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 325 -> 326... \x1b[00m\n2020-01-15 02:31:51.387 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.388 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 326 -> 327... \x1b[00m\n2020-01-15 02:31:51.397 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.397 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 327 -> 328... \x1b[00m\n2020-01-15 02:31:51.408 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.409 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 328 -> 329... \x1b[00m\n2020-01-15 02:31:51.420 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.420 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 329 -> 330... \x1b[00m\n2020-01-15 02:31:51.495 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.496 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 330 -> 331... \x1b[00m\n2020-01-15 02:31:51.746 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.746 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 331 -> 332... \x1b[00m\n2020-01-15 02:31:51.886 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:51.886 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 332 -> 333... \x1b[00m\n2020-01-15 02:31:52.013 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.014 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 333 -> 334... \x1b[00m\n2020-01-15 02:31:52.146 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.147 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 334 -> 335... \x1b[00m\n2020-01-15 02:31:52.169 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.169 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 335 -> 336... \x1b[00m\n2020-01-15 02:31:52.191 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.192 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 336 -> 337... \x1b[00m\n2020-01-15 02:31:52.213 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.214 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 337 -> 338... \x1b[00m\n2020-01-15 02:31:52.236 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.236 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 338 -> 339... \x1b[00m\n2020-01-15 02:31:52.258 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.259 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 339 -> 340... \x1b[00m\n2020-01-15 02:31:52.277 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.277 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 340 -> 341... \x1b[00m\n2020-01-15 02:31:52.290 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.290 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 341 -> 342... \x1b[00m\n2020-01-15 02:31:52.303 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.304 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 342 -> 343... \x1b[00m\n2020-01-15 02:31:52.317 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.317 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 343 -> 344... \x1b[00m\n2020-01-15 02:31:52.330 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.330 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 344 -> 345... \x1b[00m\n2020-01-15 02:31:52.393 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.394 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 345 -> 346... \x1b[00m\n2020-01-15 02:31:52.488 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.489 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 346 -> 347... \x1b[00m\n2020-01-15 02:31:52.589 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.590 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 347 -> 348... \x1b[00m\n2020-01-15 02:31:52.606 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.607 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 348 -> 349... \x1b[00m\n2020-01-15 02:31:52.624 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.624 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 349 -> 350... \x1b[00m\n2020-01-15 02:31:52.643 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.643 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 350 -> 351... \x1b[00m\n2020-01-15 02:31:52.665 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.666 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 351 -> 352... \x1b[00m\n2020-01-15 02:31:52.687 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.687 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 352 -> 353... \x1b[00m\n2020-01-15 02:31:52.708 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.709 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 353 -> 354... \x1b[00m\n2020-01-15 02:31:52.729 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.729 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 354 -> 355... \x1b[00m\n2020-01-15 02:31:52.749 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.750 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 355 -> 356... \x1b[00m\n2020-01-15 02:31:52.771 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.772 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 356 -> 357... \x1b[00m\n2020-01-15 02:31:52.794 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.795 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 357 -> 358... \x1b[00m\n2020-01-15 02:31:52.960 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:52.960 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 358 -> 359... \x1b[00m\n2020-01-15 02:31:53.117 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.118 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 359 -> 360... \x1b[00m\n2020-01-15 02:31:53.271 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.272 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 360 -> 361... \x1b[00m\n2020-01-15 02:31:53.320 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.321 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 361 -> 362... \x1b[00m\n2020-01-15 02:31:53.419 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.419 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 362 -> 363... \x1b[00m\n2020-01-15 02:31:53.431 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.431 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 363 -> 364... \x1b[00m\n2020-01-15 02:31:53.446 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.446 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 364 -> 365... \x1b[00m\n2020-01-15 02:31:53.457 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.458 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 365 -> 366... \x1b[00m\n2020-01-15 02:31:53.469 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.469 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 366 -> 367... \x1b[00m\n2020-01-15 02:31:53.481 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.481 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 367 -> 368... \x1b[00m\n2020-01-15 02:31:53.493 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.494 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 368 -> 369... \x1b[00m\n2020-01-15 02:31:53.505 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.505 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 369 -> 370... \x1b[00m\n2020-01-15 02:31:53.518 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.518 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 370 -> 371... \x1b[00m\n2020-01-15 02:31:53.532 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.532 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 371 -> 372... \x1b[00m\n2020-01-15 02:31:53.546 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.546 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 372 -> 373... \x1b[00m\n2020-01-15 02:31:53.690 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.691 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 373 -> 374... \x1b[00m\n2020-01-15 02:31:53.860 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.861 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 374 -> 375... \x1b[00m\n2020-01-15 02:31:53.938 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:53.938 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 375 -> 376... \x1b[00m\n2020-01-15 02:31:54.000 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.001 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 376 -> 377... \x1b[00m\n2020-01-15 02:31:54.090 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.091 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 377 -> 378... \x1b[00m\n2020-01-15 02:31:54.170 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.171 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 378 -> 379... \x1b[00m\n2020-01-15 02:31:54.188 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.189 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 379 -> 380... \x1b[00m\n2020-01-15 02:31:54.213 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.214 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 380 -> 381... \x1b[00m\n2020-01-15 02:31:54.233 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.234 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 381 -> 382... \x1b[00m\n2020-01-15 02:31:54.253 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.254 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 382 -> 383... \x1b[00m\n2020-01-15 02:31:54.272 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.273 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 383 -> 384... \x1b[00m\n2020-01-15 02:31:54.284 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.284 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 384 -> 385... \x1b[00m\n2020-01-15 02:31:54.294 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.295 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 385 -> 386... \x1b[00m\n2020-01-15 02:31:54.305 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.305 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 386 -> 387... \x1b[00m\n2020-01-15 02:31:54.315 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.316 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 387 -> 388... \x1b[00m\n2020-01-15 02:31:54.326 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.327 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 388 -> 389... \x1b[00m\n2020-01-15 02:31:54.360 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.360 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 389 -> 390... \x1b[00m\n2020-01-15 02:31:54.443 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.444 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 390 -> 391... \x1b[00m\n2020-01-15 02:31:54.519 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:31:54.619 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 215 -> 216... \x1b[00m\n2020-01-15 02:32:01.315 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.316 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 216 -> 217... \x1b[00m\n2020-01-15 02:32:01.333 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.333 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 217 -> 218... \x1b[00m\n2020-01-15 02:32:01.353 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.354 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 218 -> 219... \x1b[00m\n2020-01-15 02:32:01.373 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.374 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 219 -> 220... \x1b[00m\n2020-01-15 02:32:01.394 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.394 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 220 -> 221... \x1b[00m\n2020-01-15 02:32:01.406 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.406 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 221 -> 222... \x1b[00m\n2020-01-15 02:32:01.417 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.417 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 222 -> 223... \x1b[00m\n2020-01-15 02:32:01.428 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.428 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 223 -> 224... \x1b[00m\n2020-01-15 02:32:01.439 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.439 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 224 -> 225... \x1b[00m\n2020-01-15 02:32:01.449 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.450 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 225 -> 226... \x1b[00m\n2020-01-15 02:32:01.460 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.460 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 226 -> 227... \x1b[00m\n2020-01-15 02:32:01.477 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.478 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 227 -> 228... \x1b[00m\n2020-01-15 02:32:01.538 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.539 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 228 -> 229... \x1b[00m\n2020-01-15 02:32:01.619 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.620 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 229 -> 230... \x1b[00m\n2020-01-15 02:32:01.793 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.793 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 230 -> 231... \x1b[00m\n2020-01-15 02:32:01.952 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:01.953 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 231 -> 232... \x1b[00m\n2020-01-15 02:32:02.666 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.667 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 232 -> 233... \x1b[00m\n2020-01-15 02:32:02.778 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.779 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 233 -> 234... \x1b[00m\n2020-01-15 02:32:02.814 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.815 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 234 -> 235... \x1b[00m\n2020-01-15 02:32:02.827 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.827 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 235 -> 236... \x1b[00m\n2020-01-15 02:32:02.841 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.841 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 236 -> 237... \x1b[00m\n2020-01-15 02:32:02.852 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.853 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 237 -> 238... \x1b[00m\n2020-01-15 02:32:02.865 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.866 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 238 -> 239... \x1b[00m\n2020-01-15 02:32:02.879 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.879 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 239 -> 240... \x1b[00m\n2020-01-15 02:32:02.890 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.891 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 240 -> 241... \x1b[00m\n2020-01-15 02:32:02.902 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.902 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 241 -> 242... \x1b[00m\n2020-01-15 02:32:02.914 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.914 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 242 -> 243... \x1b[00m\n2020-01-15 02:32:02.927 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.928 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 243 -> 244... \x1b[00m\n2020-01-15 02:32:02.975 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:02.976 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 244 -> 245... \x1b[00m\n2020-01-15 02:32:03.416 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:03.417 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 245 -> 246... \x1b[00m\n2020-01-15 02:32:03.517 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:03.518 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 246 -> 247... \x1b[00m\n2020-01-15 02:32:03.749 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:03.749 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 247 -> 248... \x1b[00m\n2020-01-15 02:32:03.761 25002 INFO 248_add_expire_reservations_index [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] Skipped adding reservations_deleted_expire_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:32:03.775 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:03.776 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 248 -> 249... \x1b[00m\n2020-01-15 02:32:03.825 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:03.826 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 249 -> 250... \x1b[00m\n2020-01-15 02:32:03.895 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:03.896 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 250 -> 251... \x1b[00m\n2020-01-15 02:32:03.974 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:03.975 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 251 -> 252... \x1b[00m\n2020-01-15 02:32:04.225 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.226 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 252 -> 253... \x1b[00m\n2020-01-15 02:32:04.379 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.380 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 253 -> 254... \x1b[00m\n2020-01-15 02:32:04.503 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.504 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 254 -> 255... \x1b[00m\n2020-01-15 02:32:04.536 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.537 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 255 -> 256... \x1b[00m\n2020-01-15 02:32:04.555 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.556 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 256 -> 257... \x1b[00m\n2020-01-15 02:32:04.578 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.579 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 257 -> 258... \x1b[00m\n2020-01-15 02:32:04.595 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.595 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 258 -> 259... \x1b[00m\n2020-01-15 02:32:04.611 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.611 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 259 -> 260... \x1b[00m\n2020-01-15 02:32:04.628 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.628 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 260 -> 261... \x1b[00m\n2020-01-15 02:32:04.648 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.648 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 261 -> 262... \x1b[00m\n2020-01-15 02:32:04.662 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.663 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 262 -> 263... \x1b[00m\n2020-01-15 02:32:04.678 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.678 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 263 -> 264... \x1b[00m\n2020-01-15 02:32:04.693 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.694 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 264 -> 265... \x1b[00m\n2020-01-15 02:32:04.774 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.775 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 265 -> 266... \x1b[00m\n2020-01-15 02:32:04.831 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:04.832 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 266 -> 267... \x1b[00m\n2020-01-15 02:32:05.636 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:05.637 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 267 -> 268... \x1b[00m\n2020-01-15 02:32:05.716 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:05.717 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 268 -> 269... \x1b[00m\n2020-01-15 02:32:05.786 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:05.787 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 269 -> 270... \x1b[00m\n2020-01-15 02:32:05.866 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:05.867 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 270 -> 271... \x1b[00m\n2020-01-15 02:32:06.107 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.108 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 271 -> 272... \x1b[00m\n2020-01-15 02:32:06.128 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.129 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 272 -> 273... \x1b[00m\n2020-01-15 02:32:06.149 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.150 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 273 -> 274... \x1b[00m\n2020-01-15 02:32:06.254 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.255 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 274 -> 275... \x1b[00m\n2020-01-15 02:32:06.388 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.389 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 275 -> 276... \x1b[00m\n2020-01-15 02:32:06.527 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.527 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 276 -> 277... \x1b[00m\n2020-01-15 02:32:06.583 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.584 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 277 -> 278... \x1b[00m\n2020-01-15 02:32:06.701 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.701 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 278 -> 279... \x1b[00m\n2020-01-15 02:32:06.752 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.753 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 279 -> 280... \x1b[00m\n2020-01-15 02:32:06.828 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.829 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 280 -> 281... \x1b[00m\n2020-01-15 02:32:06.839 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.839 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 281 -> 282... \x1b[00m\n2020-01-15 02:32:06.849 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.850 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 282 -> 283... \x1b[00m\n2020-01-15 02:32:06.860 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.861 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 283 -> 284... \x1b[00m\n2020-01-15 02:32:06.870 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.871 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 284 -> 285... \x1b[00m\n2020-01-15 02:32:06.881 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.881 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 285 -> 286... \x1b[00m\n2020-01-15 02:32:06.892 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.893 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 286 -> 287... \x1b[00m\n2020-01-15 02:32:06.905 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.906 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 287 -> 288... \x1b[00m\n2020-01-15 02:32:06.916 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.916 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 288 -> 289... \x1b[00m\n2020-01-15 02:32:06.927 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.927 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 289 -> 290... \x1b[00m\n2020-01-15 02:32:06.937 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.938 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 290 -> 291... \x1b[00m\n2020-01-15 02:32:06.970 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:06.971 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 291 -> 292... \x1b[00m\n2020-01-15 02:32:07.229 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.230 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 292 -> 293... \x1b[00m\n2020-01-15 02:32:07.488 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.489 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 293 -> 294... \x1b[00m\n2020-01-15 02:32:07.587 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.587 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 294 -> 295... \x1b[00m\n2020-01-15 02:32:07.637 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.638 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 295 -> 296... \x1b[00m\n2020-01-15 02:32:07.649 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.649 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 296 -> 297... \x1b[00m\n2020-01-15 02:32:07.747 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.748 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 297 -> 298... \x1b[00m\n2020-01-15 02:32:07.808 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.809 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 298 -> 299... \x1b[00m\n2020-01-15 02:32:07.952 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:07.953 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 299 -> 300... \x1b[00m\n2020-01-15 02:32:08.093 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.094 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 300 -> 301... \x1b[00m\n2020-01-15 02:32:08.301 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.302 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 301 -> 302... \x1b[00m\n2020-01-15 02:32:08.328 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.329 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 302 -> 303... \x1b[00m\n2020-01-15 02:32:08.351 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.352 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 303 -> 304... \x1b[00m\n2020-01-15 02:32:08.373 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.374 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 304 -> 305... \x1b[00m\n2020-01-15 02:32:08.398 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.399 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 305 -> 306... \x1b[00m\n2020-01-15 02:32:08.420 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.420 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 306 -> 307... \x1b[00m\n2020-01-15 02:32:08.441 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.442 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 307 -> 308... \x1b[00m\n2020-01-15 02:32:08.463 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.463 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 308 -> 309... \x1b[00m\n2020-01-15 02:32:08.483 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.483 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 309 -> 310... \x1b[00m\n2020-01-15 02:32:08.504 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.505 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 310 -> 311... \x1b[00m\n2020-01-15 02:32:08.525 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.525 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 311 -> 312... \x1b[00m\n2020-01-15 02:32:08.536 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.536 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 312 -> 313... \x1b[00m\n2020-01-15 02:32:08.651 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.652 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 313 -> 314... \x1b[00m\n2020-01-15 02:32:08.811 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:08.812 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 314 -> 315... \x1b[00m\n2020-01-15 02:32:09.144 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.146 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 315 -> 316... \x1b[00m\n2020-01-15 02:32:09.269 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.270 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 316 -> 317... \x1b[00m\n2020-01-15 02:32:09.398 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.399 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 317 -> 318... \x1b[00m\n2020-01-15 02:32:09.720 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.720 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 318 -> 319... \x1b[00m\n2020-01-15 02:32:09.758 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.758 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 319 -> 320... \x1b[00m\n2020-01-15 02:32:09.771 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.771 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 320 -> 321... \x1b[00m\n2020-01-15 02:32:09.785 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.785 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 321 -> 322... \x1b[00m\n2020-01-15 02:32:09.798 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.798 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 322 -> 323... \x1b[00m\n2020-01-15 02:32:09.811 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.812 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 323 -> 324... \x1b[00m\n2020-01-15 02:32:09.825 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.825 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 324 -> 325... \x1b[00m\n2020-01-15 02:32:09.838 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.838 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 325 -> 326... \x1b[00m\n2020-01-15 02:32:09.852 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.852 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 326 -> 327... \x1b[00m\n2020-01-15 02:32:09.865 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.866 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 327 -> 328... \x1b[00m\n2020-01-15 02:32:09.879 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.879 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 328 -> 329... \x1b[00m\n2020-01-15 02:32:09.893 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.893 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 329 -> 330... \x1b[00m\n2020-01-15 02:32:09.945 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:09.946 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 330 -> 331... \x1b[00m\n2020-01-15 02:32:10.082 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.083 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 331 -> 332... \x1b[00m\n2020-01-15 02:32:10.181 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.182 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 332 -> 333... \x1b[00m\n2020-01-15 02:32:10.332 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.334 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 333 -> 334... \x1b[00m\n2020-01-15 02:32:10.514 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.515 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 334 -> 335... \x1b[00m\n2020-01-15 02:32:10.538 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.538 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 335 -> 336... \x1b[00m\n2020-01-15 02:32:10.559 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.560 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 336 -> 337... \x1b[00m\n2020-01-15 02:32:10.582 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.583 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 337 -> 338... \x1b[00m\n2020-01-15 02:32:10.604 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.605 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 338 -> 339... \x1b[00m\n2020-01-15 02:32:10.628 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.629 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 339 -> 340... \x1b[00m\n2020-01-15 02:32:10.649 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.650 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 340 -> 341... \x1b[00m\n2020-01-15 02:32:10.662 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.663 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 341 -> 342... \x1b[00m\n2020-01-15 02:32:10.675 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.675 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 342 -> 343... \x1b[00m\n2020-01-15 02:32:10.689 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.689 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 343 -> 344... \x1b[00m\n2020-01-15 02:32:10.701 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.702 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 344 -> 345... \x1b[00m\n2020-01-15 02:32:10.761 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.762 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 345 -> 346... \x1b[00m\n2020-01-15 02:32:10.870 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.870 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 346 -> 347... \x1b[00m\n2020-01-15 02:32:10.989 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:10.990 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 347 -> 348... \x1b[00m\n2020-01-15 02:32:11.011 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.012 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 348 -> 349... \x1b[00m\n2020-01-15 02:32:11.032 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.033 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 349 -> 350... \x1b[00m\n2020-01-15 02:32:11.055 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.056 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 350 -> 351... \x1b[00m\n2020-01-15 02:32:11.077 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.078 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 351 -> 352... \x1b[00m\n2020-01-15 02:32:11.099 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.099 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 352 -> 353... \x1b[00m\n2020-01-15 02:32:11.120 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.121 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 353 -> 354... \x1b[00m\n2020-01-15 02:32:11.141 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.142 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 354 -> 355... \x1b[00m\n2020-01-15 02:32:11.164 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.165 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 355 -> 356... \x1b[00m\n2020-01-15 02:32:11.187 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.188 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 356 -> 357... \x1b[00m\n2020-01-15 02:32:11.212 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.213 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 357 -> 358... \x1b[00m\n2020-01-15 02:32:11.381 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.382 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 358 -> 359... \x1b[00m\n2020-01-15 02:32:11.557 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.558 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 359 -> 360... \x1b[00m\n2020-01-15 02:32:11.710 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.711 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 360 -> 361... \x1b[00m\n2020-01-15 02:32:11.770 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.771 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 361 -> 362... \x1b[00m\n2020-01-15 02:32:11.835 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.836 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 362 -> 363... \x1b[00m\n2020-01-15 02:32:11.846 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.846 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 363 -> 364... \x1b[00m\n2020-01-15 02:32:11.857 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.857 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 364 -> 365... \x1b[00m\n2020-01-15 02:32:11.872 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.872 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 365 -> 366... \x1b[00m\n2020-01-15 02:32:11.890 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.891 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 366 -> 367... \x1b[00m\n2020-01-15 02:32:11.908 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.909 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 367 -> 368... \x1b[00m\n2020-01-15 02:32:11.925 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.926 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 368 -> 369... \x1b[00m\n2020-01-15 02:32:11.943 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.944 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 369 -> 370... \x1b[00m\n2020-01-15 02:32:11.962 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.963 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 370 -> 371... \x1b[00m\n2020-01-15 02:32:11.985 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:11.986 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 371 -> 372... \x1b[00m\n2020-01-15 02:32:12.003 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.004 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 372 -> 373... \x1b[00m\n2020-01-15 02:32:12.195 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.195 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 373 -> 374... \x1b[00m\n2020-01-15 02:32:12.386 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.387 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 374 -> 375... \x1b[00m\n2020-01-15 02:32:12.468 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.469 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 375 -> 376... \x1b[00m\n2020-01-15 02:32:12.540 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.541 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 376 -> 377... \x1b[00m\n2020-01-15 02:32:12.616 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.617 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 377 -> 378... \x1b[00m\n2020-01-15 02:32:12.697 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.698 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 378 -> 379... \x1b[00m\n2020-01-15 02:32:12.712 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.712 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 379 -> 380... \x1b[00m\n2020-01-15 02:32:12.723 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.724 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 380 -> 381... \x1b[00m\n2020-01-15 02:32:12.735 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.736 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 381 -> 382... \x1b[00m\n2020-01-15 02:32:12.748 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.749 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 382 -> 383... \x1b[00m\n2020-01-15 02:32:12.762 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.763 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 383 -> 384... \x1b[00m\n2020-01-15 02:32:12.778 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.779 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 384 -> 385... \x1b[00m\n2020-01-15 02:32:12.792 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.792 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 385 -> 386... \x1b[00m\n2020-01-15 02:32:12.806 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.806 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 386 -> 387... \x1b[00m\n2020-01-15 02:32:12.820 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.820 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 387 -> 388... \x1b[00m\n2020-01-15 02:32:12.834 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.835 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 388 -> 389... \x1b[00m\n2020-01-15 02:32:12.879 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.879 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 389 -> 390... \x1b[00m\n2020-01-15 02:32:12.988 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m\n2020-01-15 02:32:12.989 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] 390 -> 391... \x1b[00m\n2020-01-15 02:32:13.120 25002 INFO migrate.versioning.api [req-0cd92998-5080-4672-a4ab-265797a01cd0 - - - - -] done\x1b[00m'}
2020-01-15 02:32:13,770 [salt.state       :1951][INFO    ][18656] Completed state [nova-manage db sync] at time 02:32:13.770219 duration_in_ms=42735.199
2020-01-15 02:32:13,781 [salt.state       :1780][INFO    ][18656] Running state [/etc/nova/api-paste.ini] at time 02:32:13.781458
2020-01-15 02:32:13,781 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/nova/api-paste.ini]
2020-01-15 02:32:13,818 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/files/stein/api-paste.ini.Debian'
2020-01-15 02:32:13,984 [salt.state       :300 ][INFO    ][18656] File changed:
--- 
+++ 
@@ -68,7 +68,6 @@
 
 [app:oscomputeversionapp]
 paste.app_factory = nova.api.openstack.compute.versions:Versions.factory
-
 ##########
 # Shared #
 ##########

2020-01-15 02:32:13,984 [salt.state       :1951][INFO    ][18656] Completed state [/etc/nova/api-paste.ini] at time 02:32:13.984791 duration_in_ms=203.332
2020-01-15 02:32:13,985 [salt.state       :1780][INFO    ][18656] Running state [/etc/default/nova-conductor] at time 02:32:13.985622
2020-01-15 02:32:13,985 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/default/nova-conductor]
2020-01-15 02:32:14,007 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/files/default'
2020-01-15 02:32:14,017 [salt.state       :300 ][INFO    ][18656] File changed:
New file
2020-01-15 02:32:14,017 [salt.state       :1951][INFO    ][18656] Completed state [/etc/default/nova-conductor] at time 02:32:14.017370 duration_in_ms=31.748
2020-01-15 02:32:14,018 [salt.state       :1780][INFO    ][18656] Running state [/etc/default/nova-api] at time 02:32:14.018110
2020-01-15 02:32:14,018 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/default/nova-api]
2020-01-15 02:32:14,040 [salt.state       :300 ][INFO    ][18656] File changed:
New file
2020-01-15 02:32:14,041 [salt.state       :1951][INFO    ][18656] Completed state [/etc/default/nova-api] at time 02:32:14.041105 duration_in_ms=22.995
2020-01-15 02:32:14,041 [salt.state       :1780][INFO    ][18656] Running state [/etc/default/nova-consoleauth] at time 02:32:14.041902
2020-01-15 02:32:14,042 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/default/nova-consoleauth]
2020-01-15 02:32:14,064 [salt.state       :300 ][INFO    ][18656] File changed:
New file
2020-01-15 02:32:14,064 [salt.state       :1951][INFO    ][18656] Completed state [/etc/default/nova-consoleauth] at time 02:32:14.064643 duration_in_ms=22.742
2020-01-15 02:32:14,065 [salt.state       :1780][INFO    ][18656] Running state [/etc/default/nova-scheduler] at time 02:32:14.065380
2020-01-15 02:32:14,065 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/default/nova-scheduler]
2020-01-15 02:32:14,089 [salt.state       :300 ][INFO    ][18656] File changed:
New file
2020-01-15 02:32:14,089 [salt.state       :1951][INFO    ][18656] Completed state [/etc/default/nova-scheduler] at time 02:32:14.089824 duration_in_ms=24.444
2020-01-15 02:32:14,090 [salt.state       :1780][INFO    ][18656] Running state [/etc/default/nova-novncproxy] at time 02:32:14.090583
2020-01-15 02:32:14,090 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/default/nova-novncproxy]
2020-01-15 02:32:14,112 [salt.state       :300 ][INFO    ][18656] File changed:
New file
2020-01-15 02:32:14,112 [salt.state       :1951][INFO    ][18656] Completed state [/etc/default/nova-novncproxy] at time 02:32:14.112276 duration_in_ms=21.693
2020-01-15 02:32:14,115 [salt.state       :1780][INFO    ][18656] Running state [nova-conductor] at time 02:32:14.115355
2020-01-15 02:32:14,115 [salt.state       :1813][INFO    ][18656] Executing state service.running for [nova-conductor]
2020-01-15 02:32:14,116 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'status', 'nova-conductor.service', '-n', '0'] in directory '/root'
2020-01-15 02:32:14,155 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2020-01-15 02:32:14,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'nova-conductor.service'] in directory '/root'
2020-01-15 02:32:14,233 [salt.state       :300 ][INFO    ][18656] The service nova-conductor is already running
2020-01-15 02:32:14,234 [salt.state       :1951][INFO    ][18656] Completed state [nova-conductor] at time 02:32:14.234812 duration_in_ms=119.456
2020-01-15 02:32:14,235 [salt.state       :1780][INFO    ][18656] Running state [nova-conductor] at time 02:32:14.235430
2020-01-15 02:32:14,236 [salt.state       :1813][INFO    ][18656] Executing state service.mod_watch for [nova-conductor]
2020-01-15 02:32:14,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2020-01-15 02:32:14,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-conductor.service'] in directory '/root'
2020-01-15 02:32:14,910 [salt.state       :300 ][INFO    ][18656] {'nova-conductor': True}
2020-01-15 02:32:14,911 [salt.state       :1951][INFO    ][18656] Completed state [nova-conductor] at time 02:32:14.911754 duration_in_ms=676.322
2020-01-15 02:32:14,929 [salt.state       :1780][INFO    ][18656] Running state [nova-api] at time 02:32:14.929500
2020-01-15 02:32:14,930 [salt.state       :1813][INFO    ][18656] Executing state service.running for [nova-api]
2020-01-15 02:32:14,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'status', 'nova-api.service', '-n', '0'] in directory '/root'
2020-01-15 02:32:14,991 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2020-01-15 02:32:15,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'nova-api.service'] in directory '/root'
2020-01-15 02:32:15,041 [salt.state       :300 ][INFO    ][18656] The service nova-api is already running
2020-01-15 02:32:15,042 [salt.state       :1951][INFO    ][18656] Completed state [nova-api] at time 02:32:15.041923 duration_in_ms=112.424
2020-01-15 02:32:15,042 [salt.state       :1780][INFO    ][18656] Running state [nova-api] at time 02:32:15.042388
2020-01-15 02:32:15,043 [salt.state       :1813][INFO    ][18656] Executing state service.mod_watch for [nova-api]
2020-01-15 02:32:15,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2020-01-15 02:32:15,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-api.service'] in directory '/root'
2020-01-15 02:32:16,079 [salt.state       :300 ][INFO    ][18656] {'nova-api': True}
2020-01-15 02:32:16,080 [salt.state       :1951][INFO    ][18656] Completed state [nova-api] at time 02:32:16.080403 duration_in_ms=1038.014
2020-01-15 02:32:16,084 [salt.state       :1780][INFO    ][18656] Running state [nova-consoleauth] at time 02:32:16.084482
2020-01-15 02:32:16,084 [salt.state       :1813][INFO    ][18656] Executing state service.running for [nova-consoleauth]
2020-01-15 02:32:16,086 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'status', 'nova-consoleauth.service', '-n', '0'] in directory '/root'
2020-01-15 02:32:16,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2020-01-15 02:32:16,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2020-01-15 02:32:16,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'nova-consoleauth.service'] in directory '/root'
2020-01-15 02:32:16,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2020-01-15 02:32:16,223 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2020-01-15 02:32:16,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2020-01-15 02:32:16,274 [salt.state       :300 ][INFO    ][18656] {'nova-consoleauth': True}
2020-01-15 02:32:16,275 [salt.state       :1951][INFO    ][18656] Completed state [nova-consoleauth] at time 02:32:16.275032 duration_in_ms=190.55
2020-01-15 02:32:16,279 [salt.state       :1780][INFO    ][18656] Running state [nova-scheduler] at time 02:32:16.279765
2020-01-15 02:32:16,280 [salt.state       :1813][INFO    ][18656] Executing state service.running for [nova-scheduler]
2020-01-15 02:32:16,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'status', 'nova-scheduler.service', '-n', '0'] in directory '/root'
2020-01-15 02:32:16,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2020-01-15 02:32:16,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2020-01-15 02:32:16,344 [salt.state       :300 ][INFO    ][18656] The service nova-scheduler is already running
2020-01-15 02:32:16,345 [salt.state       :1951][INFO    ][18656] Completed state [nova-scheduler] at time 02:32:16.345040 duration_in_ms=65.275
2020-01-15 02:32:16,345 [salt.state       :1780][INFO    ][18656] Running state [nova-scheduler] at time 02:32:16.345620
2020-01-15 02:32:16,346 [salt.state       :1813][INFO    ][18656] Executing state service.mod_watch for [nova-scheduler]
2020-01-15 02:32:16,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2020-01-15 02:32:16,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-scheduler.service'] in directory '/root'
2020-01-15 02:32:16,835 [salt.state       :300 ][INFO    ][18656] {'nova-scheduler': True}
2020-01-15 02:32:16,836 [salt.state       :1951][INFO    ][18656] Completed state [nova-scheduler] at time 02:32:16.836277 duration_in_ms=490.656
2020-01-15 02:32:16,845 [salt.state       :1780][INFO    ][18656] Running state [nova-novncproxy] at time 02:32:16.845501
2020-01-15 02:32:16,846 [salt.state       :1813][INFO    ][18656] Executing state service.running for [nova-novncproxy]
2020-01-15 02:32:16,847 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'status', 'nova-novncproxy.service', '-n', '0'] in directory '/root'
2020-01-15 02:32:16,880 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2020-01-15 02:32:16,909 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'nova-novncproxy.service'] in directory '/root'
2020-01-15 02:32:16,930 [salt.state       :300 ][INFO    ][18656] The service nova-novncproxy is already running
2020-01-15 02:32:16,930 [salt.state       :1951][INFO    ][18656] Completed state [nova-novncproxy] at time 02:32:16.930687 duration_in_ms=85.185
2020-01-15 02:32:16,931 [salt.state       :1780][INFO    ][18656] Running state [nova-novncproxy] at time 02:32:16.931260
2020-01-15 02:32:16,931 [salt.state       :1813][INFO    ][18656] Executing state service.mod_watch for [nova-novncproxy]
2020-01-15 02:32:16,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2020-01-15 02:32:16,952 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-novncproxy.service'] in directory '/root'
2020-01-15 02:32:17,343 [salt.state       :300 ][INFO    ][18656] {'nova-novncproxy': True}
2020-01-15 02:32:17,343 [salt.state       :1951][INFO    ][18656] Completed state [nova-novncproxy] at time 02:32:17.343713 duration_in_ms=412.452
2020-01-15 02:32:17,345 [salt.state       :1780][INFO    ][18656] Running state [nova-manage db online_data_migrations] at time 02:32:17.345440
2020-01-15 02:32:17,345 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [nova-manage db online_data_migrations]
2020-01-15 02:32:17,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command '/bin/true' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:32:17,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage db online_data_migrations' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:32:22,661 [salt.state       :300 ][INFO    ][18656] {'pid': 25488, 'retcode': 0, 'stderr': '', 'stdout': 'Running batches of 50 until complete\n+---------------------------------------------+--------------+-----------+\n|                  Migration                  | Total Needed | Completed |\n+---------------------------------------------+--------------+-----------+\n|         create_incomplete_consumers         |      0       |     0     |\n| delete_build_requests_with_no_instance_uuid |      0       |     0     |\n|         fill_virtual_interface_list         |      0       |     0     |\n|             migrate_empty_ratio             |      0       |     0     |\n|          migrate_keypairs_to_api_db         |      0       |     0     |\n|       migrate_quota_classes_to_api_db       |      0       |     0     |\n|        migrate_quota_limits_to_api_db       |      0       |     0     |\n|          migration_migrate_to_uuid          |      0       |     0     |\n|     populate_missing_availability_zones     |      0       |     0     |\n|          populate_queued_for_delete         |      0       |     0     |\n|               populate_user_id              |      0       |     0     |\n|                populate_uuids               |      0       |     0     |\n|     service_uuids_online_data_migration     |      0       |     0     |\n+---------------------------------------------+--------------+-----------+'}
2020-01-15 02:32:22,664 [salt.state       :1951][INFO    ][18656] Completed state [nova-manage db online_data_migrations] at time 02:32:22.664561 duration_in_ms=5319.118
2020-01-15 02:32:22,666 [salt.state       :1780][INFO    ][18656] Running state [/etc/systemd/system/nova-placement-api.service] at time 02:32:22.666464
2020-01-15 02:32:22,667 [salt.state       :1813][INFO    ][18656] Executing state file.symlink for [/etc/systemd/system/nova-placement-api.service]
2020-01-15 02:32:22,674 [salt.state       :300 ][INFO    ][18656] {'new': '/etc/systemd/system/nova-placement-api.service'}
2020-01-15 02:32:22,675 [salt.state       :1951][INFO    ][18656] Completed state [/etc/systemd/system/nova-placement-api.service] at time 02:32:22.674967 duration_in_ms=8.503
2020-01-15 02:32:22,679 [salt.state       :1780][INFO    ][18656] Running state [nova-placement-api] at time 02:32:22.679408
2020-01-15 02:32:22,680 [salt.state       :1813][INFO    ][18656] Executing state pkg.installed for [nova-placement-api]
2020-01-15 02:32:22,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:32:22,859 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-placement-api'] in directory '/root'
2020-01-15 02:32:24,642 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023224628586
2020-01-15 02:32:24,664 [salt.minion      :1432][INFO    ][25584] Starting a new job with PID 25584
2020-01-15 02:32:24,710 [salt.minion      :1711][INFO    ][25584] Returning information for job: 20200115023224628586
2020-01-15 02:32:28,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:32:29,011 [salt.state       :300 ][INFO    ][18656] Made the following changes:
'nova-placement-api' changed from 'absent' to '2:19.0.3-0ubuntu1~cloud0'

2020-01-15 02:32:29,085 [salt.state       :915 ][INFO    ][18656] Loading fresh modules for state activity
2020-01-15 02:32:29,166 [salt.state       :1951][INFO    ][18656] Completed state [nova-placement-api] at time 02:32:29.166626 duration_in_ms=6487.219
2020-01-15 02:32:29,173 [salt.state       :1780][INFO    ][18656] Running state [/etc/apache2/sites-available/nova-placement-api.conf] at time 02:32:29.173561
2020-01-15 02:32:29,174 [salt.state       :1813][INFO    ][18656] Executing state file.managed for [/etc/apache2/sites-available/nova-placement-api.conf]
2020-01-15 02:32:29,209 [salt.fileclient  :1219][INFO    ][18656] Fetching file from saltenv 'base', ** done ** 'nova/files/stein/nova-placement-api.conf'
2020-01-15 02:32:29,385 [salt.state       :300 ][INFO    ][18656] File changed:
--- 
+++ 
@@ -1,6 +1,7 @@
-Listen 8778
 
-<VirtualHost *:8778>
+Listen 192.168.10.36:8778
+
+<VirtualHost 192.168.10.36:8778>
     WSGIScriptAlias / /usr/bin/nova-placement-api
     WSGIDaemonProcess nova-placement processes=5 threads=1 user=nova group=nova display-name=%{GROUP}
     WSGIProcessGroup nova-placement
@@ -13,7 +14,7 @@
     </IfVersion>
 
     ErrorLog /var/log/apache2/nova_placement_error.log
-    CustomLog /var/log/apache2/nova_placement_access.log combined
+    CustomLog /var/log/apache2/nova_placement_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 
     <Directory /usr/bin>
         <IfVersion >= 2.4>
@@ -25,13 +26,3 @@
         </IfVersion>
     </Directory>
 </VirtualHost>
-
-Alias /placement /usr/bin/nova-placement-api
-<Location /placement>
-  SetHandler wsgi-script
-  Options +ExecCGI
-
-  WSGIProcessGroup nova-placement
-  WSGIApplicationGroup %{GLOBAL}
-  WSGIPassAuthorization On
-</Location>

2020-01-15 02:32:29,386 [salt.state       :1951][INFO    ][18656] Completed state [/etc/apache2/sites-available/nova-placement-api.conf] at time 02:32:29.386136 duration_in_ms=212.574
2020-01-15 02:32:29,393 [salt.state       :1780][INFO    ][18656] Running state [nova-placement-api] at time 02:32:29.393587
2020-01-15 02:32:29,393 [salt.state       :1813][INFO    ][18656] Executing state apache_site.enabled for [nova-placement-api]
2020-01-15 02:32:29,394 [salt.state       :300 ][INFO    ][18656] nova-placement-api already enabled.
2020-01-15 02:32:29,394 [salt.state       :1951][INFO    ][18656] Completed state [nova-placement-api] at time 02:32:29.394706 duration_in_ms=1.12
2020-01-15 02:32:29,396 [salt.state       :1780][INFO    ][18656] Running state [nova-manage cell_v2 discover_hosts --verbose] at time 02:32:29.396569
2020-01-15 02:32:29,396 [salt.state       :1813][INFO    ][18656] Executing state cmd.run for [nova-manage cell_v2 discover_hosts --verbose]
2020-01-15 02:32:29,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage cell_v2 discover_hosts --verbose' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:32:34,167 [salt.state       :300 ][INFO    ][18656] {'pid': 25771, 'retcode': 0, 'stderr': '', 'stdout': "Found 2 cell mappings.\nSkipping cell0 since it does not contain hosts.\nGetting computes from cell 'cell1': abc718f7-cb51-4fc4-81cb-77e8326c8928\nFound 0 unmapped computes in cell: abc718f7-cb51-4fc4-81cb-77e8326c8928"}
2020-01-15 02:32:34,169 [salt.state       :1951][INFO    ][18656] Completed state [nova-manage cell_v2 discover_hosts --verbose] at time 02:32:34.168793 duration_in_ms=4772.221
2020-01-15 02:32:34,190 [salt.state       :1780][INFO    ][18656] Running state [cell1] at time 02:32:34.189924
2020-01-15 02:32:34,190 [salt.state       :1813][INFO    ][18656] Executing state novav21.instances_mapped_to_cell for [cell1]
2020-01-15 02:32:34,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage cell_v2 list_cells 2>/dev/null | awk '/cell1/ {print $4}'' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:32:38,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command 'nova-manage cell_v2 map_instances --cell_uuid abc718f7-cb51-4fc4-81cb-77e8326c8928' as user 'nova' in directory '/var/lib/nova'
2020-01-15 02:32:43,321 [salt.state       :300 ][INFO    ][18656] All instances mapped in cell cell1
2020-01-15 02:32:43,323 [salt.state       :1951][INFO    ][18656] Completed state [cell1] at time 02:32:43.323061 duration_in_ms=9133.135
2020-01-15 02:32:44,264 [salt.state       :1780][INFO    ][18656] Running state [apache2] at time 02:32:44.264892
2020-01-15 02:32:44,265 [salt.state       :1813][INFO    ][18656] Executing state service.running for [apache2]
2020-01-15 02:32:44,266 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:32:44,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:32:44,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2020-01-15 02:32:44,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:32:44,568 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:32:44,610 [salt.loaded.int.module.cmdmod:395 ][INFO    ][18656] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:32:44,648 [salt.state       :300 ][INFO    ][18656] {'apache2': True}
2020-01-15 02:32:44,649 [salt.state       :1951][INFO    ][18656] Completed state [apache2] at time 02:32:44.648926 duration_in_ms=384.036
2020-01-15 02:32:44,664 [salt.minion      :1711][INFO    ][18656] Returning information for job: 20200115022908713395
2020-01-15 02:35:26,644 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115023526631927
2020-01-15 02:35:26,683 [salt.minion      :1432][INFO    ][26140] Starting a new job with PID 26140
2020-01-15 02:35:33,779 [salt.state       :915 ][INFO    ][26140] Loading fresh modules for state activity
2020-01-15 02:35:33,902 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/init.sls'
2020-01-15 02:35:33,969 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/server.sls'
2020-01-15 02:35:34,254 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/db/offline_sync.sls'
2020-01-15 02:35:34,318 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/_ssl/mysql.sls'
2020-01-15 02:35:34,387 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/_ssl/rabbitmq.sls'
2020-01-15 02:35:34,883 [keyring.backend  :170 ][INFO    ][26140] Loading Windows (alt)
2020-01-15 02:35:34,895 [keyring.backend  :170 ][INFO    ][26140] Loading pyfs
2020-01-15 02:35:34,896 [keyring.backend  :170 ][INFO    ][26140] Loading multi
2020-01-15 02:35:34,897 [keyring.backend  :170 ][INFO    ][26140] Loading Google
2020-01-15 02:35:34,899 [keyring.backend  :170 ][INFO    ][26140] Loading Gnome
2020-01-15 02:35:34,904 [keyring.backend  :170 ][INFO    ][26140] Loading keyczar
2020-01-15 02:35:34,904 [keyring.backend  :170 ][INFO    ][26140] Loading file
2020-01-15 02:35:36,046 [salt.state       :1780][INFO    ][26140] Running state [heat-api] at time 02:35:36.046267
2020-01-15 02:35:36,046 [salt.state       :1813][INFO    ][26140] Executing state pkg.installed for [heat-api]
2020-01-15 02:35:36,047 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:35:37,227 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['apt-cache', '-q', 'policy', 'heat-api'] in directory '/root'
2020-01-15 02:35:37,886 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:35:41,737 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023541722501
2020-01-15 02:35:41,758 [salt.minion      :1432][INFO    ][26793] Starting a new job with PID 26793
2020-01-15 02:35:41,783 [salt.minion      :1711][INFO    ][26793] Returning information for job: 20200115023541722501
2020-01-15 02:35:42,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:35:42,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api'] in directory '/root'
2020-01-15 02:36:11,822 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023611805829
2020-01-15 02:36:11,848 [salt.minion      :1432][INFO    ][27587] Starting a new job with PID 27587
2020-01-15 02:36:11,873 [salt.minion      :1711][INFO    ][27587] Returning information for job: 20200115023611805829
2020-01-15 02:36:12,073 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:36:12,192 [salt.state       :300 ][INFO    ][26140] Made the following changes:
'python3-croniter' changed from 'absent' to '0.3.24-2~cloud0'
'python3-zaqarclient' changed from 'absent' to '1.9.0-0ubuntu1'
'python3-blazarclient' changed from 'absent' to '2.1.0-0ubuntu1~cloud0'
'python3-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python3-heatclient' changed from 'absent' to '1.17.0-0ubuntu1~cloud0'
'python3-magnumclient' changed from 'absent' to '2.8.0-0ubuntu1'
'python3-aodhclient' changed from 'absent' to '1.0.0-0ubuntu1'
'python3-ceilometerclient' changed from 'absent' to '2.9.0-0ubuntu1'
'python3-webtest' changed from 'absent' to '2.0.28-1ubuntu1'
'python3-monascaclient' changed from 'absent' to '1.14.0-0ubuntu1~cloud0'
'python3-mistralclient' changed from 'absent' to '1:3.3.0-0ubuntu1'
'python3-neutron-lib' changed from 'absent' to '1.25.0-0ubuntu1~cloud0'
'python3-heat' changed from 'absent' to '1:12.0.0-0ubuntu1~cloud0'
'python3-manilaclient' changed from 'absent' to '1.27.0-0ubuntu1~cloud0'
'python3-setproctitle' changed from 'absent' to '1.1.10-1build2'
'python3-pecan' changed from 'absent' to '1.3.2-0ubuntu1~cloud0'
'python3-gnocchiclient' changed from 'absent' to '7.0.1-0ubuntu1'
'python3-waitress' changed from 'absent' to '1.0.1-1'
'python3-logutils' changed from 'absent' to '0.3.3-5'
'python3-troveclient' changed from 'absent' to '1:2.14.0-0ubuntu1'
'python3-designateclient' changed from 'absent' to '2.9.0-0ubuntu1'
'heat-common' changed from 'absent' to '1:12.0.0-0ubuntu1~cloud0'
'python3-yaql' changed from 'absent' to '1.1.3-0ubuntu1'
'python3-saharaclient' changed from 'absent' to '2.2.0-0ubuntu1~cloud0'
'python3-octaviaclient' changed from 'absent' to '1.8.0-0ubuntu1~cloud0'
'python3-senlinclient' changed from 'absent' to '1.9.0-0ubuntu1~cloud0'
'heat-api' changed from 'absent' to '1:12.0.0-0ubuntu1~cloud0'

2020-01-15 02:36:12,274 [salt.state       :915 ][INFO    ][26140] Loading fresh modules for state activity
2020-01-15 02:36:12,323 [salt.state       :1951][INFO    ][26140] Completed state [heat-api] at time 02:36:12.323396 duration_in_ms=36277.127
2020-01-15 02:36:12,339 [salt.state       :1780][INFO    ][26140] Running state [heat-api-cfn] at time 02:36:12.339787
2020-01-15 02:36:12,340 [salt.state       :1813][INFO    ][26140] Executing state pkg.installed for [heat-api-cfn]
2020-01-15 02:36:13,716 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:36:13,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api-cfn'] in directory '/root'
2020-01-15 02:36:20,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:36:20,918 [salt.state       :300 ][INFO    ][26140] Made the following changes:
'heat-api-cfn' changed from 'absent' to '1:12.0.0-0ubuntu1~cloud0'

2020-01-15 02:36:20,993 [salt.state       :915 ][INFO    ][26140] Loading fresh modules for state activity
2020-01-15 02:36:21,055 [salt.state       :1951][INFO    ][26140] Completed state [heat-api-cfn] at time 02:36:21.055799 duration_in_ms=8716.013
2020-01-15 02:36:21,063 [salt.state       :1780][INFO    ][26140] Running state [heat-engine] at time 02:36:21.063136
2020-01-15 02:36:21,063 [salt.state       :1813][INFO    ][26140] Executing state pkg.installed for [heat-engine]
2020-01-15 02:36:22,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:36:22,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-engine'] in directory '/root'
2020-01-15 02:36:29,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:36:29,237 [salt.state       :300 ][INFO    ][26140] Made the following changes:
'heat-engine' changed from 'absent' to '1:12.0.0-0ubuntu1~cloud0'

2020-01-15 02:36:29,269 [salt.state       :915 ][INFO    ][26140] Loading fresh modules for state activity
2020-01-15 02:36:29,315 [salt.state       :1951][INFO    ][26140] Completed state [heat-engine] at time 02:36:29.315283 duration_in_ms=8252.146
2020-01-15 02:36:29,324 [salt.state       :1780][INFO    ][26140] Running state [heat-common] at time 02:36:29.324937
2020-01-15 02:36:29,325 [salt.state       :1813][INFO    ][26140] Executing state pkg.installed for [heat-common]
2020-01-15 02:36:30,391 [salt.state       :300 ][INFO    ][26140] All specified packages are already installed
2020-01-15 02:36:30,393 [salt.state       :1951][INFO    ][26140] Completed state [heat-common] at time 02:36:30.393439 duration_in_ms=1068.5
2020-01-15 02:36:30,393 [salt.state       :1780][INFO    ][26140] Running state [python-heatclient] at time 02:36:30.393867
2020-01-15 02:36:30,394 [salt.state       :1813][INFO    ][26140] Executing state pkg.installed for [python-heatclient]
2020-01-15 02:36:30,425 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:36:30,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-heatclient'] in directory '/root'
2020-01-15 02:36:37,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:36:37,735 [salt.state       :300 ][INFO    ][26140] Made the following changes:
'python-heatclient' changed from 'absent' to '1.17.0-0ubuntu1~cloud0'
'python-swiftclient' changed from 'absent' to '1:3.7.0-0ubuntu1~cloud0'

2020-01-15 02:36:37,810 [salt.state       :915 ][INFO    ][26140] Loading fresh modules for state activity
2020-01-15 02:36:38,033 [salt.state       :1951][INFO    ][26140] Completed state [python-heatclient] at time 02:36:38.032941 duration_in_ms=7639.073
2020-01-15 02:36:38,039 [salt.state       :1780][INFO    ][26140] Running state [gettext-base] at time 02:36:38.039725
2020-01-15 02:36:38,040 [salt.state       :1813][INFO    ][26140] Executing state pkg.installed for [gettext-base]
2020-01-15 02:36:39,088 [salt.state       :300 ][INFO    ][26140] All specified packages are already installed
2020-01-15 02:36:39,089 [salt.state       :1951][INFO    ][26140] Completed state [gettext-base] at time 02:36:39.088918 duration_in_ms=1049.192
2020-01-15 02:36:39,094 [salt.state       :1780][INFO    ][26140] Running state [heat_ssl_mysql] at time 02:36:39.094328
2020-01-15 02:36:39,094 [salt.state       :1813][INFO    ][26140] Executing state test.show_notification for [heat_ssl_mysql]
2020-01-15 02:36:39,095 [salt.state       :300 ][INFO    ][26140] Running heat._ssl.mysql
2020-01-15 02:36:39,095 [salt.state       :1951][INFO    ][26140] Completed state [heat_ssl_mysql] at time 02:36:39.095282 duration_in_ms=0.954
2020-01-15 02:36:39,095 [salt.state       :1780][INFO    ][26140] Running state [heat_ssl_rabbitmq] at time 02:36:39.095691
2020-01-15 02:36:39,095 [salt.state       :1813][INFO    ][26140] Executing state test.show_notification for [heat_ssl_rabbitmq]
2020-01-15 02:36:39,096 [salt.state       :300 ][INFO    ][26140] Running heat._ssl.rabbitmq
2020-01-15 02:36:39,096 [salt.state       :1951][INFO    ][26140] Completed state [heat_ssl_rabbitmq] at time 02:36:39.096585 duration_in_ms=0.894
2020-01-15 02:36:39,097 [salt.state       :1780][INFO    ][26140] Running state [/etc/heat/heat.conf] at time 02:36:39.097144
2020-01-15 02:36:39,097 [salt.state       :1813][INFO    ][26140] Executing state file.managed for [/etc/heat/heat.conf]
2020-01-15 02:36:39,137 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/files/stein/heat.conf.Debian'
2020-01-15 02:36:39,421 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_healthcheck.conf'
2020-01-15 02:36:39,608 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/service/_ssl.conf'
2020-01-15 02:36:39,692 [salt.state       :300 ][INFO    ][26140] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -6,10 +7,6 @@
 
 # Name of the engine node. This can be an opaque identifier. It is not
 # necessarily a hostname, FQDN, or IP address. (string value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #host = <Hostname>
 
 # List of directories to search for plug-ins. (list value)
@@ -47,6 +44,7 @@
 # Maximum resources allowed per top-level stack. -1 stands for unlimited.
 # (integer value)
 #max_resources_per_stack = 1000
+max_resources_per_stack = 20000
 
 # Maximum number of stacks any one tenant may have active at one time. (integer
 # value)
@@ -68,11 +66,6 @@
 # (integer value)
 # Minimum value: 1
 #max_interface_check_attempts = 10
-
-# Maximum nova API version for client plugin. With this limitation, any nova
-# feature supported with microversion number above max_nova_api_microversion
-# will not be available. (floating point value)
-#max_nova_api_microversion = <None>
 
 # Controls how many events will be pruned whenever a stack's events are purged.
 # Set this lower to keep more events at the expense of more frequent purges.
@@ -191,9 +184,11 @@
 # require instances to use a different endpoint than in the keystone catalog
 # (string value)
 #heat_metadata_server_url = <None>
+heat_metadata_server_url = http://192.168.10.13:8000
 
 # URL of the Heat waitcondition server. (string value)
 #heat_waitcondition_server_url = <None>
+heat_waitcondition_server_url = http://192.168.10.13:8000/v1/waitcondition
 
 # DEPRECATED: URL of the Heat CloudWatch server. (string value)
 # This option is deprecated for removal since 10.0.0.
@@ -210,6 +205,7 @@
 
 # Default region name used to get services endpoints. (string value)
 #region_name_for_services = <None>
+region_name_for_services = RegionOne
 
 # Keystone role for heat template-defined users. (string value)
 #heat_stack_user_role = heat_stack_user
@@ -218,20 +214,20 @@
 # is set, stack_user_domain_name option will be ignored. (string value)
 # Deprecated group/name - [DEFAULT]/stack_user_domain
 #stack_user_domain_id = <None>
-
 # Keystone domain name which contains heat template-defined users. If
 # `stack_user_domain_id` option is set, this option is ignored. (string value)
-#stack_user_domain_name = <None>
+stack_user_domain_name = heat_user_domain
 
 # Keystone username, a user with roles sufficient to manage users and projects
 # in the stack_user_domain. (string value)
-#stack_domain_admin = <None>
+stack_domain_admin = heat_domain_admin
 
 # Keystone password for stack_domain_admin user. (string value)
-#stack_domain_admin_password = <None>
+stack_domain_admin_password = opnfv_secret
 
 # Maximum raw byte size of any template. (integer value)
 #max_template_size = 524288
+max_template_size = 5440000
 
 # Maximum depth allowed when using nested stacks. (integer value)
 #max_nested_stack_depth = 5
@@ -255,6 +251,7 @@
 # Maximum raw byte size of JSON request body. Should be larger than
 # max_template_size. (integer value)
 #max_json_body_size = 1048576
+max_json_body_size = 10880000
 
 #
 # From heat.engine.clients
@@ -274,7 +271,7 @@
 # From heat.engine.notification
 #
 
-# Default notification level for outgoing notifications. (string value)
+# Default notification level for outgoingnotifications. (string value)
 #default_notification_level = INFO
 
 # Default publisher_id for outgoing notifications. (string value)
@@ -286,7 +283,6 @@
 
 # Custom template for the built-in loadbalancer nested stack. (string value)
 #loadbalancer_template = <None>
-
 #
 # From oslo.log
 #
@@ -301,7 +297,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -316,6 +312,7 @@
 # log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
+log_file = /var/log/heat/heat.log
 
 # (Optional) The base directory used for relative log_file  paths. This option
 # is ignored if log_config_append is set. (string value)
@@ -352,63 +349,27 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when
-# the service was started) is used when scheduling the next rotation. (string
-# value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
 # Additional data to append to log message when logging level for the message
-# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -449,6 +410,151 @@
 # The time-to-live in sec of idle connections in the pool (integer value)
 #conn_pool_ttl = 1200
 
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
 # Size of executor thread pool when executor is threading or eventlet. (integer
 # value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
@@ -456,6 +562,7 @@
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
+rpc_response_timeout = 600
 
 # The network address and optional user credentials for connecting to the
 # messaging backend, in URL format. The expected format is:
@@ -468,11 +575,20 @@
 # oslo_messaging.TransportURL at
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
-#transport_url = rabbit://
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
+#control_exchange = keystone
+
 
 #
 # From oslo.service.periodic_task
@@ -532,18 +648,13 @@
 # Type of endpoint in Identity service catalog to use for communication with
 # the OpenStack service. (string value)
 #endpoint_type = publicURL
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
+endpoint_type = internalURL
 
 # Optional PEM-formatted certificate chain file. (string value)
 #cert_file = <None>
 
 # Optional PEM-formatted file that contains the private key. (string value)
 #key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = false
 
 
 [clients_aodh]
@@ -673,6 +784,7 @@
 # Type of endpoint in Identity service catalog to use for communication with
 # the OpenStack service. (string value)
 #endpoint_type = <None>
+endpoint_type = publicURL
 
 # Optional CA cert file to use in SSL connections. (string value)
 #ca_file = <None>
@@ -696,25 +808,19 @@
 #
 # From heat.common.config
 #
+# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
+#auth_uri =
+auth_uri = http://192.168.10.35:35357
 
 # Type of endpoint in Identity service catalog to use for communication with
 # the OpenStack service. (string value)
 #endpoint_type = <None>
 
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
 # Optional PEM-formatted certificate chain file. (string value)
 #cert_file = <None>
 
 # Optional PEM-formatted file that contains the private key. (string value)
 #key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
-#auth_uri =
 
 
 [clients_magnum]
@@ -995,9 +1101,7 @@
 # If set, then the server's certificate will not be verified. (boolean value)
 #insecure = <None>
 
-
 [cors]
-
 #
 # From oslo.middleware
 #
@@ -1012,7 +1116,7 @@
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -1022,11 +1126,10 @@
 
 # Indicate which header field names may be used during the actual request.
 # (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
 
 
 [database]
-
 #
 # From oslo.db
 #
@@ -1044,9 +1147,9 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://heat:opnfv_secret@192.168.10.23/heat?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
@@ -1068,6 +1171,7 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
+connection_recycle_time = 300
 
 # DEPRECATED: Minimum number of SQL connections to keep open in a pool.
 # (integer value)
@@ -1084,12 +1188,14 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -1100,6 +1206,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -1147,7 +1254,9 @@
 #
 
 # Authentication Endpoint URI. (string value)
+# NOTE(vsaienko) autodiscovery doesn't work here. Set version explicitly
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000/v3
 
 # Allow orchestration of multiple clouds. (boolean value)
 #multi_cloud = false
@@ -1185,7 +1294,6 @@
 
 
 [healthcheck]
-
 #
 # From oslo.middleware
 #
@@ -1195,10 +1303,7 @@
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response. Security note:
-# Enabling this option may expose sensitive details about the service being
-# monitored. Be sure to verify that it will not violate your security policies.
-# (boolean value)
+# Show more detailed information as part of the response (boolean value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
@@ -1224,6 +1329,7 @@
 # Address to bind the server. Useful when selecting a particular network
 # interface. (IP address value)
 #bind_host = 0.0.0.0
+bind_host = 192.168.10.36
 
 # The port on which the server will listen. (port value)
 # Minimum value: 0
@@ -1243,6 +1349,7 @@
 # start number of workers equal number of cores on server. (integer value)
 # Minimum value: 0
 #workers = 0
+workers = 4
 
 # Maximum line size of message headers to be accepted. max_header_line may need
 # to be increased when using large tokens (typically those generated by the
@@ -1264,6 +1371,7 @@
 # Address to bind the server. Useful when selecting a particular network
 # interface. (IP address value)
 #bind_host = 0.0.0.0
+bind_host = 192.168.10.36
 
 # The port on which the server will listen. (port value)
 # Minimum value: 0
@@ -1377,6 +1485,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -1392,6 +1501,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -1442,26 +1552,22 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 
 # In order to prevent excessive effort spent validating tokens, the middleware
 # caches previously-seen tokens for a configurable duration (in seconds). Set
 # to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -1500,6 +1606,14 @@
 # allowed. Finally the name of a binding method that must be present in tokens.
 # (string value)
 #enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
 
 # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
 # single algorithm or multiple. The algorithms are those supported by Python
@@ -1531,10 +1645,160 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = heat
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
 
 [noauth]
 
@@ -1547,258 +1811,7 @@
 #token_response =
 
 
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
 [oslo_messaging_notifications]
-
 #
 # From oslo.messaging
 #
@@ -1807,6 +1820,7 @@
 # messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver=messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -1822,15 +1836,14 @@
 # to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
 # (integer value)
 #retry = -1
-
-
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
 
 # Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
@@ -1839,24 +1852,6 @@
 # Connect over SSL. (boolean value)
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
@@ -1879,6 +1874,40 @@
 # shuffle - <No description provided>
 #kombu_failover_strategy = round-robin
 
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
 # The RabbitMQ login method. (string value)
 # Possible values:
 # PLAIN - <No description provided>
@@ -1886,6 +1915,12 @@
 # RABBIT-CR-DEMO - <No description provided>
 #rabbit_login_method = AMQPLAIN
 
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
 
@@ -1896,6 +1931,12 @@
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
 #rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
 
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
@@ -1926,7 +1967,6 @@
 
 
 [oslo_middleware]
-
 #
 # From oslo.middleware
 #
@@ -1946,54 +1986,10 @@
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
 
 
 [oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
 
 [paste_deploy]
 
@@ -2137,7 +2133,6 @@
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
@@ -2163,7 +2158,6 @@
 # cipher list format. (string value)
 #ciphers = <None>
 
-
 [trustee]
 
 #
@@ -2172,13 +2166,14 @@
 
 # Authentication type to load (string value)
 # Deprecated group/name - [trustee]/auth_plugin
-#auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
 
 # Scope for system operations (string value)
 #system_scope = <None>
@@ -2199,6 +2194,7 @@
 
 # Domain ID containing project (string value)
 #project_domain_id = <None>
+project_domain_id = default
 
 # Domain name containing project (string value)
 #project_domain_name = <None>
@@ -2222,15 +2218,19 @@
 # Username (string value)
 # Deprecated group/name - [trustee]/user_name
 #username = <None>
+username = heat
 
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
+user_domain_name = Default
 
 # User's password (string value)
 #password = <None>
+password = opnfv_secret
 
 
 [volumes]
@@ -2243,3 +2243,87 @@
 # until cinder-backup service becomes discoverable, see LP#1334856. (boolean
 # value)
 #backups_enabled = true
+
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+

2020-01-15 02:36:39,695 [salt.state       :1951][INFO    ][26140] Completed state [/etc/heat/heat.conf] at time 02:36:39.695385 duration_in_ms=598.239
2020-01-15 02:36:39,698 [salt.state       :1780][INFO    ][26140] Running state [heat-manage db_sync] at time 02:36:39.698049
2020-01-15 02:36:39,698 [salt.state       :1813][INFO    ][26140] Executing state cmd.run for [heat-manage db_sync]
2020-01-15 02:36:39,700 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command 'heat-manage db_sync' as user 'heat' in directory '/var/lib/heat'
2020-01-15 02:36:41,926 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023641913402
2020-01-15 02:36:41,948 [salt.minion      :1432][INFO    ][28558] Starting a new job with PID 28558
2020-01-15 02:36:41,978 [salt.minion      :1711][INFO    ][28558] Returning information for job: 20200115023641913402
2020-01-15 02:36:43,958 [salt.state       :300 ][INFO    ][26140] {'pid': 28541, 'retcode': 0, 'stderr': '', 'stdout': '2020-01-15 02:36:42.222 28543 INFO migrate.versioning.api [-] 70 -> 71... \x1b[00m\n2020-01-15 02:36:42.810 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:42.811 28543 INFO migrate.versioning.api [-] 71 -> 72... \x1b[00m\n2020-01-15 02:36:42.888 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:42.889 28543 INFO migrate.versioning.api [-] 72 -> 73... \x1b[00m\n2020-01-15 02:36:42.993 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:42.993 28543 INFO migrate.versioning.api [-] 73 -> 74... \x1b[00m\n2020-01-15 02:36:43.010 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.010 28543 INFO migrate.versioning.api [-] 74 -> 75... \x1b[00m\n2020-01-15 02:36:43.029 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.029 28543 INFO migrate.versioning.api [-] 75 -> 76... \x1b[00m\n2020-01-15 02:36:43.046 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.046 28543 INFO migrate.versioning.api [-] 76 -> 77... \x1b[00m\n2020-01-15 02:36:43.063 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.064 28543 INFO migrate.versioning.api [-] 77 -> 78... \x1b[00m\n2020-01-15 02:36:43.081 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.081 28543 INFO migrate.versioning.api [-] 78 -> 79... \x1b[00m\n2020-01-15 02:36:43.276 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.276 28543 INFO migrate.versioning.api [-] 79 -> 80... \x1b[00m\n2020-01-15 02:36:43.393 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.394 28543 INFO migrate.versioning.api [-] 80 -> 81... \x1b[00m\n2020-01-15 02:36:43.410 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.411 28543 INFO migrate.versioning.api [-] 81 -> 82... \x1b[00m\n2020-01-15 02:36:43.429 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.429 28543 INFO migrate.versioning.api [-] 82 -> 83... \x1b[00m\n2020-01-15 02:36:43.447 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.448 28543 INFO migrate.versioning.api [-] 83 -> 84... \x1b[00m\n2020-01-15 02:36:43.466 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.466 28543 INFO migrate.versioning.api [-] 84 -> 85... \x1b[00m\n2020-01-15 02:36:43.483 28543 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:36:43.484 28543 INFO migrate.versioning.api [-] 85 -> 86... \x1b[00m\n2020-01-15 02:36:43.658 28543 INFO migrate.versioning.api [-] done\x1b[00m'}
2020-01-15 02:36:43,959 [salt.state       :1951][INFO    ][26140] Completed state [heat-manage db_sync] at time 02:36:43.959574 duration_in_ms=4261.524
2020-01-15 02:36:43,960 [salt.state       :1780][INFO    ][26140] Running state [/etc/heat/api-paste.ini] at time 02:36:43.960639
2020-01-15 02:36:43,961 [salt.state       :1813][INFO    ][26140] Executing state file.managed for [/etc/heat/api-paste.ini]
2020-01-15 02:36:43,990 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/files/stein/api-paste.ini'
2020-01-15 02:36:44,004 [salt.state       :300 ][INFO    ][26140] {'mode': '0640'}
2020-01-15 02:36:44,004 [salt.state       :1951][INFO    ][26140] Completed state [/etc/heat/api-paste.ini] at time 02:36:44.004894 duration_in_ms=44.254
2020-01-15 02:36:44,005 [salt.state       :1780][INFO    ][26140] Running state [/etc/default/heat-api] at time 02:36:44.005709
2020-01-15 02:36:44,006 [salt.state       :1813][INFO    ][26140] Executing state file.managed for [/etc/default/heat-api]
2020-01-15 02:36:44,034 [salt.fileclient  :1219][INFO    ][26140] Fetching file from saltenv 'base', ** done ** 'heat/files/default'
2020-01-15 02:36:44,048 [salt.state       :300 ][INFO    ][26140] File changed:
New file
2020-01-15 02:36:44,048 [salt.state       :1951][INFO    ][26140] Completed state [/etc/default/heat-api] at time 02:36:44.048602 duration_in_ms=42.892
2020-01-15 02:36:44,049 [salt.state       :1780][INFO    ][26140] Running state [/etc/default/heat-api-cfn] at time 02:36:44.049114
2020-01-15 02:36:44,049 [salt.state       :1813][INFO    ][26140] Executing state file.managed for [/etc/default/heat-api-cfn]
2020-01-15 02:36:44,073 [salt.state       :300 ][INFO    ][26140] File changed:
New file
2020-01-15 02:36:44,073 [salt.state       :1951][INFO    ][26140] Completed state [/etc/default/heat-api-cfn] at time 02:36:44.073874 duration_in_ms=24.76
2020-01-15 02:36:44,074 [salt.state       :1780][INFO    ][26140] Running state [/etc/default/heat-engine] at time 02:36:44.074362
2020-01-15 02:36:44,074 [salt.state       :1813][INFO    ][26140] Executing state file.managed for [/etc/default/heat-engine]
2020-01-15 02:36:44,099 [salt.state       :300 ][INFO    ][26140] File changed:
New file
2020-01-15 02:36:44,100 [salt.state       :1951][INFO    ][26140] Completed state [/etc/default/heat-engine] at time 02:36:44.100102 duration_in_ms=25.739
2020-01-15 02:36:44,101 [salt.state       :1780][INFO    ][26140] Running state [source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret] at time 02:36:44.101102
2020-01-15 02:36:44,101 [salt.state       :1813][INFO    ][26140] Executing state cmd.run for [source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret]
2020-01-15 02:36:44,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command 'source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret' in directory '/root'
2020-01-15 02:36:50,143 [salt.state       :300 ][INFO    ][26140] {'pid': 28590, 'retcode': 0, 'stderr': "/usr/lib/python3/dist-packages/keystoneauth1/adapter.py:224: UserWarning: Using keystoneclient sessions has been deprecated. Please update your software to use keystoneauth1.\n  warnings.warn('Using keystoneclient sessions has been deprecated. '", 'stdout': '2020-01-15 02:36:46.501 28591 INFO __main__ [-] Creating domain heat_user_domain\x1b[00m\n\nPlease update your heat.conf with the following in [DEFAULT]\n\nstack_user_domain_id=b479504de52e48d98042cc4a53fb57e9\nstack_domain_admin=heat_domain_admin\nstack_domain_admin_password=opnfv_secret'}
2020-01-15 02:36:50,145 [salt.state       :1951][INFO    ][26140] Completed state [source /root/keystonercv3; heat-keystone-setup-domain --stack-user-domain-name heat_user_domain --stack-domain-admin heat_domain_admin --stack-domain-admin-password opnfv_secret] at time 02:36:50.145070 duration_in_ms=6043.965
2020-01-15 02:36:50,147 [salt.state       :1780][INFO    ][26140] Running state [chown heat:heat /var/log/heat/ -R] at time 02:36:50.147508
2020-01-15 02:36:50,148 [salt.state       :1813][INFO    ][26140] Executing state cmd.run for [chown heat:heat /var/log/heat/ -R]
2020-01-15 02:36:50,151 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command 'chown heat:heat /var/log/heat/ -R' in directory '/root'
2020-01-15 02:36:50,188 [salt.state       :300 ][INFO    ][26140] {'pid': 28604, 'retcode': 0, 'stderr': '', 'stdout': ''}
2020-01-15 02:36:50,190 [salt.state       :1951][INFO    ][26140] Completed state [chown heat:heat /var/log/heat/ -R] at time 02:36:50.190272 duration_in_ms=42.765
2020-01-15 02:36:50,200 [salt.state       :1780][INFO    ][26140] Running state [heat-api] at time 02:36:50.200142
2020-01-15 02:36:50,201 [salt.state       :1813][INFO    ][26140] Executing state service.running for [heat-api]
2020-01-15 02:36:50,203 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'status', 'heat-api.service', '-n', '0'] in directory '/root'
2020-01-15 02:36:50,252 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2020-01-15 02:36:50,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-enabled', 'heat-api.service'] in directory '/root'
2020-01-15 02:36:50,341 [salt.state       :300 ][INFO    ][26140] The service heat-api is already running
2020-01-15 02:36:50,342 [salt.state       :1951][INFO    ][26140] Completed state [heat-api] at time 02:36:50.342173 duration_in_ms=142.031
2020-01-15 02:36:50,343 [salt.state       :1780][INFO    ][26140] Running state [heat-api] at time 02:36:50.343210
2020-01-15 02:36:50,344 [salt.state       :1813][INFO    ][26140] Executing state service.mod_watch for [heat-api]
2020-01-15 02:36:50,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2020-01-15 02:36:50,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api.service'] in directory '/root'
2020-01-15 02:36:50,804 [salt.state       :300 ][INFO    ][26140] {'heat-api': True}
2020-01-15 02:36:50,805 [salt.state       :1951][INFO    ][26140] Completed state [heat-api] at time 02:36:50.805146 duration_in_ms=461.937
2020-01-15 02:36:50,806 [salt.state       :1780][INFO    ][26140] Running state [heat-api-cfn] at time 02:36:50.806914
2020-01-15 02:36:50,807 [salt.state       :1813][INFO    ][26140] Executing state service.running for [heat-api-cfn]
2020-01-15 02:36:50,808 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'status', 'heat-api-cfn.service', '-n', '0'] in directory '/root'
2020-01-15 02:36:50,836 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2020-01-15 02:36:50,861 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-enabled', 'heat-api-cfn.service'] in directory '/root'
2020-01-15 02:36:50,885 [salt.state       :300 ][INFO    ][26140] The service heat-api-cfn is already running
2020-01-15 02:36:50,886 [salt.state       :1951][INFO    ][26140] Completed state [heat-api-cfn] at time 02:36:50.886188 duration_in_ms=79.272
2020-01-15 02:36:50,887 [salt.state       :1780][INFO    ][26140] Running state [heat-api-cfn] at time 02:36:50.887683
2020-01-15 02:36:50,888 [salt.state       :1813][INFO    ][26140] Executing state service.mod_watch for [heat-api-cfn]
2020-01-15 02:36:50,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2020-01-15 02:36:50,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api-cfn.service'] in directory '/root'
2020-01-15 02:36:50,967 [salt.state       :300 ][INFO    ][26140] {'heat-api-cfn': True}
2020-01-15 02:36:50,969 [salt.state       :1951][INFO    ][26140] Completed state [heat-api-cfn] at time 02:36:50.969439 duration_in_ms=81.757
2020-01-15 02:36:50,972 [salt.state       :1780][INFO    ][26140] Running state [heat-engine] at time 02:36:50.972159
2020-01-15 02:36:50,974 [salt.state       :1813][INFO    ][26140] Executing state service.running for [heat-engine]
2020-01-15 02:36:50,975 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'status', 'heat-engine.service', '-n', '0'] in directory '/root'
2020-01-15 02:36:51,011 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2020-01-15 02:36:51,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-enabled', 'heat-engine.service'] in directory '/root'
2020-01-15 02:36:51,066 [salt.state       :300 ][INFO    ][26140] The service heat-engine is already running
2020-01-15 02:36:51,067 [salt.state       :1951][INFO    ][26140] Completed state [heat-engine] at time 02:36:51.067336 duration_in_ms=95.176
2020-01-15 02:36:51,068 [salt.state       :1780][INFO    ][26140] Running state [heat-engine] at time 02:36:51.067957
2020-01-15 02:36:51,068 [salt.state       :1813][INFO    ][26140] Executing state service.mod_watch for [heat-engine]
2020-01-15 02:36:51,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2020-01-15 02:36:51,097 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26140] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-engine.service'] in directory '/root'
2020-01-15 02:36:51,511 [salt.state       :300 ][INFO    ][26140] {'heat-engine': True}
2020-01-15 02:36:51,511 [salt.state       :1951][INFO    ][26140] Completed state [heat-engine] at time 02:36:51.511640 duration_in_ms=443.682
2020-01-15 02:36:51,517 [salt.minion      :1711][INFO    ][26140] Returning information for job: 20200115023526631927
2020-01-15 02:38:09,948 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115023809938609
2020-01-15 02:38:09,984 [salt.minion      :1432][INFO    ][28810] Starting a new job with PID 28810
2020-01-15 02:38:17,180 [salt.state       :915 ][INFO    ][28810] Loading fresh modules for state activity
2020-01-15 02:38:17,297 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/init.sls'
2020-01-15 02:38:17,338 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/controller.sls'
2020-01-15 02:38:17,504 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/user.sls'
2020-01-15 02:38:18,450 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/db/offline_sync.sls'
2020-01-15 02:38:18,635 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/controller_mysql.sls'
2020-01-15 02:38:18,802 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/rabbitmq.sls'
2020-01-15 02:38:18,936 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/volume.sls'
2020-01-15 02:38:19,542 [keyring.backend  :170 ][INFO    ][28810] Loading Windows (alt)
2020-01-15 02:38:19,554 [keyring.backend  :170 ][INFO    ][28810] Loading pyfs
2020-01-15 02:38:19,555 [keyring.backend  :170 ][INFO    ][28810] Loading multi
2020-01-15 02:38:19,556 [keyring.backend  :170 ][INFO    ][28810] Loading Google
2020-01-15 02:38:19,558 [keyring.backend  :170 ][INFO    ][28810] Loading Gnome
2020-01-15 02:38:19,563 [keyring.backend  :170 ][INFO    ][28810] Loading keyczar
2020-01-15 02:38:19,564 [keyring.backend  :170 ][INFO    ][28810] Loading file
2020-01-15 02:38:20,740 [salt.state       :1780][INFO    ][28810] Running state [apache2] at time 02:38:20.740403
2020-01-15 02:38:20,741 [salt.state       :1813][INFO    ][28810] Executing state pkg.installed for [apache2]
2020-01-15 02:38:20,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:38:22,168 [salt.state       :300 ][INFO    ][28810] All specified packages are already installed
2020-01-15 02:38:22,168 [salt.state       :1951][INFO    ][28810] Completed state [apache2] at time 02:38:22.168581 duration_in_ms=1428.182
2020-01-15 02:38:22,169 [salt.state       :1780][INFO    ][28810] Running state [openssl] at time 02:38:22.169003
2020-01-15 02:38:22,169 [salt.state       :1813][INFO    ][28810] Executing state pkg.installed for [openssl]
2020-01-15 02:38:22,178 [salt.state       :300 ][INFO    ][28810] All specified packages are already installed
2020-01-15 02:38:22,178 [salt.state       :1951][INFO    ][28810] Completed state [openssl] at time 02:38:22.178866 duration_in_ms=9.863
2020-01-15 02:38:22,179 [salt.state       :1780][INFO    ][28810] Running state [a2enmod ssl] at time 02:38:22.179634
2020-01-15 02:38:22,179 [salt.state       :1813][INFO    ][28810] Executing state cmd.run for [a2enmod ssl]
2020-01-15 02:38:22,180 [salt.state       :300 ][INFO    ][28810] /etc/apache2/mods-enabled/ssl.load exists
2020-01-15 02:38:22,180 [salt.state       :1951][INFO    ][28810] Completed state [a2enmod ssl] at time 02:38:22.180651 duration_in_ms=1.017
2020-01-15 02:38:22,181 [salt.state       :1780][INFO    ][28810] Running state [a2enmod rewrite] at time 02:38:22.181181
2020-01-15 02:38:22,181 [salt.state       :1813][INFO    ][28810] Executing state cmd.run for [a2enmod rewrite]
2020-01-15 02:38:22,181 [salt.state       :300 ][INFO    ][28810] /etc/apache2/mods-enabled/rewrite.load exists
2020-01-15 02:38:22,182 [salt.state       :1951][INFO    ][28810] Completed state [a2enmod rewrite] at time 02:38:22.182061 duration_in_ms=0.881
2020-01-15 02:38:22,182 [salt.state       :1780][INFO    ][28810] Running state [libapache2-mod-wsgi-py3] at time 02:38:22.182589
2020-01-15 02:38:22,182 [salt.state       :1813][INFO    ][28810] Executing state pkg.installed for [libapache2-mod-wsgi-py3]
2020-01-15 02:38:22,192 [salt.state       :300 ][INFO    ][28810] All specified packages are already installed
2020-01-15 02:38:22,192 [salt.state       :1951][INFO    ][28810] Completed state [libapache2-mod-wsgi-py3] at time 02:38:22.192220 duration_in_ms=9.631
2020-01-15 02:38:22,192 [salt.state       :1780][INFO    ][28810] Running state [a2enmod wsgi] at time 02:38:22.192810
2020-01-15 02:38:22,193 [salt.state       :1813][INFO    ][28810] Executing state cmd.run for [a2enmod wsgi]
2020-01-15 02:38:22,193 [salt.state       :300 ][INFO    ][28810] /etc/apache2/mods-enabled/wsgi.load exists
2020-01-15 02:38:22,193 [salt.state       :1951][INFO    ][28810] Completed state [a2enmod wsgi] at time 02:38:22.193679 duration_in_ms=0.87
2020-01-15 02:38:22,197 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:38:22.197638
2020-01-15 02:38:22,197 [salt.state       :1813][INFO    ][28810] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2020-01-15 02:38:22,198 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2020-01-15 02:38:22,198 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:38:22.198604 duration_in_ms=0.966
2020-01-15 02:38:22,198 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:38:22.198887
2020-01-15 02:38:22,199 [salt.state       :1813][INFO    ][28810] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2020-01-15 02:38:22,199 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2020-01-15 02:38:22,199 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:38:22.199727 duration_in_ms=0.84
2020-01-15 02:38:22,200 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:38:22.199994
2020-01-15 02:38:22,200 [salt.state       :1813][INFO    ][28810] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2020-01-15 02:38:22,200 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2020-01-15 02:38:22,200 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:38:22.200870 duration_in_ms=0.876
2020-01-15 02:38:22,201 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:38:22.201144
2020-01-15 02:38:22,201 [salt.state       :1813][INFO    ][28810] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2020-01-15 02:38:22,201 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2020-01-15 02:38:22,201 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:38:22.201945 duration_in_ms=0.801
2020-01-15 02:38:22,204 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 02:38:22.204325
2020-01-15 02:38:22,204 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2020-01-15 02:38:22,288 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2020-01-15 02:38:22,288 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 02:38:22.288859 duration_in_ms=84.534
2020-01-15 02:38:22,290 [salt.state       :1780][INFO    ][28810] Running state [a2enmod mpm_event] at time 02:38:22.289962
2020-01-15 02:38:22,290 [salt.state       :1813][INFO    ][28810] Executing state cmd.run for [a2enmod mpm_event]
2020-01-15 02:38:22,290 [salt.state       :300 ][INFO    ][28810] /etc/apache2/mods-enabled/mpm_event.load exists
2020-01-15 02:38:22,291 [salt.state       :1951][INFO    ][28810] Completed state [a2enmod mpm_event] at time 02:38:22.290986 duration_in_ms=1.024
2020-01-15 02:38:22,292 [salt.state       :1780][INFO    ][28810] Running state [apache_server_service_task] at time 02:38:22.292014
2020-01-15 02:38:22,292 [salt.state       :1813][INFO    ][28810] Executing state test.show_notification for [apache_server_service_task]
2020-01-15 02:38:22,292 [salt.state       :300 ][INFO    ][28810] Running apache.server.service
2020-01-15 02:38:22,293 [salt.state       :1951][INFO    ][28810] Completed state [apache_server_service_task] at time 02:38:22.293076 duration_in_ms=1.062
2020-01-15 02:38:22,293 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/ports.conf] at time 02:38:22.293676
2020-01-15 02:38:22,294 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/apache2/ports.conf]
2020-01-15 02:38:22,369 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/ports.conf is in the correct state
2020-01-15 02:38:22,370 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/ports.conf] at time 02:38:22.370252 duration_in_ms=76.576
2020-01-15 02:38:22,370 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/conf-available/security.conf] at time 02:38:22.370875
2020-01-15 02:38:22,371 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2020-01-15 02:38:22,453 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/conf-available/security.conf is in the correct state
2020-01-15 02:38:22,454 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/conf-available/security.conf] at time 02:38:22.454249 duration_in_ms=83.374
2020-01-15 02:38:22,467 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 02:38:22.467393
2020-01-15 02:38:22,467 [salt.state       :1813][INFO    ][28810] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2020-01-15 02:38:22,468 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/sites-enabled/000-default.conf is not present
2020-01-15 02:38:22,468 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 02:38:22.468610 duration_in_ms=1.217
2020-01-15 02:38:22,469 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:38:22.469359
2020-01-15 02:38:22,469 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2020-01-15 02:38:22,841 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2020-01-15 02:38:22,842 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:38:22.842263 duration_in_ms=372.903
2020-01-15 02:38:22,843 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:38:22.843264
2020-01-15 02:38:22,843 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2020-01-15 02:38:23,229 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2020-01-15 02:38:23,229 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:38:23.229579 duration_in_ms=386.314
2020-01-15 02:38:23,230 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:38:23.230163
2020-01-15 02:38:23,230 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2020-01-15 02:38:23,627 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2020-01-15 02:38:23,628 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:38:23.628233 duration_in_ms=398.069
2020-01-15 02:38:23,629 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:38:23.629146
2020-01-15 02:38:23,629 [salt.state       :1813][INFO    ][28810] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2020-01-15 02:38:23,632 [salt.state       :300 ][INFO    ][28810] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2020-01-15 02:38:23,633 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:38:23.633063 duration_in_ms=3.917
2020-01-15 02:38:23,637 [salt.state       :1780][INFO    ][28810] Running state [apache2] at time 02:38:23.637575
2020-01-15 02:38:23,638 [salt.state       :1813][INFO    ][28810] Executing state service.running for [apache2]
2020-01-15 02:38:23,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2020-01-15 02:38:23,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:38:23,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:38:23,812 [salt.state       :300 ][INFO    ][28810] The service apache2 is already running
2020-01-15 02:38:23,813 [salt.state       :1951][INFO    ][28810] Completed state [apache2] at time 02:38:23.813667 duration_in_ms=176.09
2020-01-15 02:38:23,817 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/conf-enabled/security.conf] at time 02:38:23.816978
2020-01-15 02:38:23,818 [salt.state       :1813][INFO    ][28810] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2020-01-15 02:38:23,824 [salt.state       :300 ][INFO    ][28810] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2020-01-15 02:38:23,825 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/conf-enabled/security.conf] at time 02:38:23.825302 duration_in_ms=8.323
2020-01-15 02:38:23,826 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:38:23.826155
2020-01-15 02:38:23,826 [salt.state       :1813][INFO    ][28810] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2020-01-15 02:38:23,828 [salt.state       :300 ][INFO    ][28810] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2020-01-15 02:38:23,829 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:38:23.829011 duration_in_ms=2.856
2020-01-15 02:38:23,843 [salt.state       :1780][INFO    ][28810] Running state [cinder] at time 02:38:23.843036
2020-01-15 02:38:23,843 [salt.state       :1813][INFO    ][28810] Executing state group.present for [cinder]
2020-01-15 02:38:23,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['groupadd', '-g 304', '-r', 'cinder'] in directory '/root'
2020-01-15 02:38:23,908 [salt.state       :300 ][INFO    ][28810] {'passwd': 'x', 'gid': 304, 'name': 'cinder', 'members': []}
2020-01-15 02:38:23,910 [salt.state       :1951][INFO    ][28810] Completed state [cinder] at time 02:38:23.910286 duration_in_ms=67.25
2020-01-15 02:38:23,912 [salt.state       :1780][INFO    ][28810] Running state [cinder] at time 02:38:23.912619
2020-01-15 02:38:23,913 [salt.state       :1813][INFO    ][28810] Executing state user.present for [cinder]
2020-01-15 02:38:23,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['useradd', '-s', '/bin/false', '-u', '304', '-g', '304', '-m', '-d', '/var/lib/cinder', '-r', 'cinder'] in directory '/root'
2020-01-15 02:38:23,988 [salt.state       :300 ][INFO    ][28810] {'shell': '/bin/false', 'workphone': '', 'uid': 304, 'passwd': 'x', 'roomnumber': '', 'groups': ['cinder'], 'home': '/var/lib/cinder', 'name': 'cinder', 'gid': 304, 'fullname': '', 'homephone': ''}
2020-01-15 02:38:23,989 [salt.state       :1951][INFO    ][28810] Completed state [cinder] at time 02:38:23.989630 duration_in_ms=77.011
2020-01-15 02:38:23,992 [salt.state       :1780][INFO    ][28810] Running state [cinder-scheduler] at time 02:38:23.992482
2020-01-15 02:38:23,993 [salt.state       :1813][INFO    ][28810] Executing state pkg.installed for [cinder-scheduler]
2020-01-15 02:38:24,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['apt-cache', '-q', 'policy', 'cinder-scheduler'] in directory '/root'
2020-01-15 02:38:24,615 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:38:25,033 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023825016059
2020-01-15 02:38:25,067 [salt.minion      :1432][INFO    ][28915] Starting a new job with PID 28915
2020-01-15 02:38:25,115 [salt.minion      :1711][INFO    ][28915] Returning information for job: 20200115023825016059
2020-01-15 02:38:29,374 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:38:29,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'cinder-scheduler'] in directory '/root'
2020-01-15 02:38:42,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:38:42,892 [salt.state       :300 ][INFO    ][28810] Made the following changes:
'python3-cinder' changed from 'absent' to '2:14.0.2-0ubuntu1~cloud0'
'cinder-common' changed from 'absent' to '2:14.0.2-0ubuntu1~cloud0'
'cinder-scheduler' changed from 'absent' to '2:14.0.2-0ubuntu1~cloud0'

2020-01-15 02:38:42,932 [salt.state       :915 ][INFO    ][28810] Loading fresh modules for state activity
2020-01-15 02:38:42,976 [salt.state       :1951][INFO    ][28810] Completed state [cinder-scheduler] at time 02:38:42.976130 duration_in_ms=18983.648
2020-01-15 02:38:42,982 [salt.state       :1780][INFO    ][28810] Running state [cinder_controller_ssl_mysql] at time 02:38:42.982391
2020-01-15 02:38:42,982 [salt.state       :1813][INFO    ][28810] Executing state test.show_notification for [cinder_controller_ssl_mysql]
2020-01-15 02:38:42,983 [salt.state       :300 ][INFO    ][28810] Running cinder._ssl.controller_mysql
2020-01-15 02:38:42,983 [salt.state       :1951][INFO    ][28810] Completed state [cinder_controller_ssl_mysql] at time 02:38:42.983367 duration_in_ms=0.976
2020-01-15 02:38:42,983 [salt.state       :1780][INFO    ][28810] Running state [cinder_controller_ssl_rabbitmq] at time 02:38:42.983853
2020-01-15 02:38:42,984 [salt.state       :1813][INFO    ][28810] Executing state test.show_notification for [cinder_controller_ssl_rabbitmq]
2020-01-15 02:38:42,984 [salt.state       :300 ][INFO    ][28810] Running cinder._ssl.rabbitmq
2020-01-15 02:38:42,984 [salt.state       :1951][INFO    ][28810] Completed state [cinder_controller_ssl_rabbitmq] at time 02:38:42.984650 duration_in_ms=0.797
2020-01-15 02:38:42,985 [salt.state       :1780][INFO    ][28810] Running state [/etc/cinder/cinder.conf] at time 02:38:42.985462
2020-01-15 02:38:42,985 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/cinder/cinder.conf]
2020-01-15 02:38:43,031 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/files/stein/cinder.conf.controller.Debian'
2020-01-15 02:38:43,294 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/files/backend/_lvm.conf'
2020-01-15 02:38:43,533 [salt.state       :300 ][INFO    ][28810] File changed:
--- 
+++ 
@@ -1,15 +1,5208 @@
+
 [DEFAULT]
-rootwrap_config = /etc/cinder/rootwrap.conf
-api_paste_confg = /etc/cinder/api-paste.ini
+
+#
+# From cinder
+#
+
+# The maximum number of items that a collection resource returns in a single
+# response (integer value)
+#osapi_max_limit = 1000
+
+# Json file indicating user visible filter parameters for list queries. (string
+# value)
+# Deprecated group/name - [DEFAULT]/query_volume_filters
+#resource_query_filters_file = /etc/cinder/resource_filters.json
+
+# DEPRECATED: Volume filter options which non-admin user could use to query
+# volumes. Default values are: ['name', 'status', 'metadata',
+# 'availability_zone' ,'bootable', 'group_id'] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#query_volume_filters = name,status,metadata,availability_zone,bootable,group_id
+
+# Treat X-Forwarded-For as the canonical remote address. Only enable this if
+# you have a sanitizing proxy. (boolean value)
+#use_forwarded_for = false
+
+# Public url to use for versions endpoint. The default is None, which will use
+# the request's host_url attribute to populate the URL base. If Cinder is
+# operating behind a proxy, you will want to change this to represent the
+# proxy's URL. (string value)
+#public_endpoint = <None>
+
+# Backup services use same backend. (boolean value)
+#backup_use_same_host = false
+
+# Compression algorithm (None to disable) (string value)
+# Possible values:
+# none - <No description provided>
+# off - <No description provided>
+# no - <No description provided>
+# zlib - <No description provided>
+# gzip - <No description provided>
+# bz2 - <No description provided>
+# bzip2 - <No description provided>
+#backup_compression_algorithm = zlib
+
+# Backup metadata version to be used when backing up volume metadata. If this
+# number is bumped, make sure the service doing the restore supports the new
+# version. (integer value)
+#backup_metadata_version = 2
+
+# The number of chunks or objects, for which one Ceilometer notification will
+# be sent (integer value)
+#backup_object_number_per_notification = 10
+
+# Interval, in seconds, between two progress notifications reporting the backup
+# status (integer value)
+#backup_timer_interval = 120
+
+# Ceph configuration file to use. (string value)
+#backup_ceph_conf = /etc/ceph/ceph.conf
+
+# The Ceph user to connect with. Default here is to use the same user as for
+# Cinder volumes. If not using cephx this should be set to None. (string value)
+#backup_ceph_user = cinder
+
+# The chunk size, in bytes, that a backup is broken into before transfer to the
+# Ceph object store. (integer value)
+#backup_ceph_chunk_size = 134217728
+
+# The Ceph pool where volume backups are stored. (string value)
+#backup_ceph_pool = backups
+
+# RBD stripe unit to use when creating a backup image. (integer value)
+#backup_ceph_stripe_unit = 0
+
+# RBD stripe count to use when creating a backup image. (integer value)
+#backup_ceph_stripe_count = 0
+
+# If True, apply JOURNALING and EXCLUSIVE_LOCK feature bits to the backup RBD
+# objects to allow mirroring (boolean value)
+#backup_ceph_image_journals = false
+
+# If True, always discard excess bytes when restoring volumes i.e. pad with
+# zeroes. (boolean value)
+#restore_discard_excess_bytes = true
+
+# The GCS bucket to use. (string value)
+#backup_gcs_bucket = <None>
+
+# The size in bytes of GCS backup objects. (integer value)
+#backup_gcs_object_size = 52428800
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_gcs_object_size has to be multiple of backup_gcs_block_size. (integer
+# value)
+#backup_gcs_block_size = 32768
+
+# GCS object will be downloaded in chunks of bytes. (integer value)
+#backup_gcs_reader_chunk_size = 2097152
+
+# GCS object will be uploaded in chunks of bytes. Pass in a value of -1 if the
+# file is to be uploaded as a single chunk. (integer value)
+#backup_gcs_writer_chunk_size = 2097152
+
+# Number of times to retry. (integer value)
+#backup_gcs_num_retries = 3
+
+# List of GCS error codes. (list value)
+#backup_gcs_retry_error_codes = 429
+
+# Location of GCS bucket. (string value)
+#backup_gcs_bucket_location = US
+
+# Storage class of GCS bucket. (string value)
+#backup_gcs_storage_class = NEARLINE
+
+# Absolute path of GCS service account credential file. (string value)
+#backup_gcs_credential_file = <None>
+
+# Owner project id for GCS bucket. (string value)
+#backup_gcs_project_id = <None>
+
+# Http user-agent string for gcs api. (string value)
+#backup_gcs_user_agent = gcscinder
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the GCS backend storage. The default
+# value is True to enable the timer. (boolean value)
+#backup_gcs_enable_progress_timer = true
+
+# URL for http proxy access. (uri value)
+#backup_gcs_proxy_url = <None>
+
+# Base dir containing mount point for gluster share. (string value)
+#glusterfs_backup_mount_point = $state_path/backup_mount
+
+# GlusterFS share in <hostname|ipv4addr|ipv6addr>:<gluster_vol_name> format.
+# Eg: 1.2.3.4:backup_vol (string value)
+#glusterfs_backup_share = <None>
+
+# Base dir containing mount point for NFS share. (string value)
+#backup_mount_point_base = $state_path/backup_mount
+
+# NFS share in hostname:path, ipv4addr:path, or "[ipv6addr]:path" format.
+# (string value)
+#backup_share = <None>
+
+# Mount options passed to the NFS client. See NFS man page for details. (string
+# value)
+#backup_mount_options = <None>
+
+# The maximum size in bytes of the files used to hold backups. If the volume
+# being backed up exceeds this size, then it will be backed up into multiple
+# files.backup_file_size must be a multiple of backup_sha_block_size_bytes.
+# (integer value)
+#backup_file_size = 1999994880
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_file_size has to be multiple of backup_sha_block_size_bytes. (integer
+# value)
+#backup_sha_block_size_bytes = 32768
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the backend storage. The default
+# value is True to enable the timer. (boolean value)
+#backup_enable_progress_timer = true
+
+# Path specifying where to store backups. (string value)
+#backup_posix_path = $state_path/backup
+
+# Custom directory to use for backups. (string value)
+#backup_container = <None>
+
+# The URL of the Swift endpoint (uri value)
+#backup_swift_url = <None>
+
+# The URL of the Keystone endpoint (uri value)
+#backup_swift_auth_url = <None>
+
+# Info to match when looking for swift in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if backup_swift_url is unset (string value)
+#swift_catalog_info = object-store:swift:publicURL
+
+# Info to match when looking for keystone in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if backup_swift_auth_url is unset (string value)
+#keystone_catalog_info = identity:Identity Service:publicURL
+
+# Swift authentication mechanism (per_user or single_user). (string value)
+# Possible values:
+# per_user - <No description provided>
+# single_user - <No description provided>
+#backup_swift_auth = per_user
+
+# Swift authentication version. Specify "1" for auth 1.0, or "2" for auth 2.0
+# or "3" for auth 3.0 (string value)
+#backup_swift_auth_version = 1
+
+# Swift tenant/account name. Required when connecting to an auth 2.0 system
+# (string value)
+#backup_swift_tenant = <None>
+
+# Swift user domain name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_user_domain = <None>
+
+# Swift project domain name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_project_domain = <None>
+
+# Swift project/account name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_project = <None>
+
+# Swift user name (string value)
+#backup_swift_user = <None>
+
+# Swift key for authentication (string value)
+#backup_swift_key = <None>
+
+# The default Swift container to use (string value)
+#backup_swift_container = volumebackups
+
+# The size in bytes of Swift backup objects (integer value)
+#backup_swift_object_size = 52428800
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_swift_object_size has to be multiple of backup_swift_block_size.
+# (integer value)
+#backup_swift_block_size = 32768
+
+# The number of retries to make for Swift operations (integer value)
+#backup_swift_retry_attempts = 3
+
+# The backoff time in seconds between Swift retries (integer value)
+#backup_swift_retry_backoff = 2
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the Swift backend storage. The
+# default value is True to enable the timer. (boolean value)
+#backup_swift_enable_progress_timer = true
+
+# Location of the CA certificate file to use for swift client requests. (string
+# value)
+#backup_swift_ca_cert_file = <None>
+
+# Bypass verification of server certificate when making SSL connection to
+# Swift. (boolean value)
+#backup_swift_auth_insecure = false
+
+# Volume prefix for the backup id when backing up to TSM (string value)
+#backup_tsm_volume_prefix = backup
+
+# TSM password for the running username (string value)
+#backup_tsm_password = password
+
+# Enable or Disable compression for backups (boolean value)
+#backup_tsm_compression = true
+
+# Driver to use for backups. (string value)
+#backup_driver = cinder.backup.drivers.swift.SwiftBackupDriver
+
+# Offload pending backup delete during backup service startup. If false, the
+# backup service will remain down until all pending backups are deleted.
+# (boolean value)
+#backup_service_inithost_offload = true
+
+# Size of the native threads pool for the backups.  Most backup drivers rely
+# heavily on this, it can be decreased for specific drivers that don't.
+# (integer value)
+# Minimum value: 20
+#backup_native_threads_pool_size = 60
+
+# Number of backup processes to launch. Improves performance with concurrent
+# backups. (integer value)
+# Minimum value: 1
+# Maximum value: 4
+#backup_workers = 1
+
+# Name of this cluster. Used to group volume hosts that share the same backend
+# configurations to work in HA Active-Active mode.  Active-Active is not yet
+# supported. (string value)
+#cluster = <None>
+
+# Top-level directory for maintaining cinder's state (string value)
+#state_path = /var/lib/cinder
+
+# IP address of this host (host address value)
+#my_ip = <HOST_IP_ADDRESS>
+
+# A list of the URLs of glance API servers available to cinder
+# ([http[s]://][hostname|ip]:port). If protocol is not specified it defaults to
+# http. (list value)
+glance_api_servers = http://192.168.10.35:9292
+
+# Number retries when downloading an image from glance (integer value)
+# Minimum value: 0
+#glance_num_retries = 0
+
+# Allow to perform insecure SSL (https) requests to glance (https will be used
+# but cert validation will not be performed). (boolean value)
+#glance_api_insecure = false
+
+# Enables or disables negotiation of SSL layer compression. In some cases
+# disabling compression can improve data throughput, such as when high network
+# bandwidth is available and you use compressed image formats like qcow2.
+# (boolean value)
+#glance_api_ssl_compression = false
+
+# Location of ca certificates file to use for glance client requests. (string
+# value)
+#glance_ca_certificates_file = <None>
+
+# http/https timeout value for glance operations. If no value (None) is
+# supplied here, the glanceclient default value is used. (integer value)
+#glance_request_timeout = <None>
+
+# DEPRECATED: Deploy v2 of the Cinder API. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#enable_v2_api = true
+
+# Deploy v3 of the Cinder API. (boolean value)
+#enable_v3_api = true
+
+# Enables or disables rate limit of the API. (boolean value)
+#api_rate_limit = true
+
+# Specify list of extensions to load when using osapi_volume_extension option
+# with cinder.api.contrib.select_extensions (list value)
+#osapi_volume_ext_list =
+
+# osapi volume extension to load (multi valued)
+#osapi_volume_extension = cinder.api.contrib.standard_extensions
+
+# Full class name for the Manager for volume (string value)
+#volume_manager = cinder.volume.manager.VolumeManager
+
+# Full class name for the Manager for volume backup (string value)
+#backup_manager = cinder.backup.manager.BackupManager
+
+# Full class name for the Manager for scheduler (string value)
+#scheduler_manager = cinder.scheduler.manager.SchedulerManager
+
+# Name of this node.  This can be an opaque identifier. It is not necessarily a
+# host name, FQDN, or IP address. (host address value)
+#host = localhost
+
+# Availability zone of this node. Can be overridden per volume backend with the
+# option "backend_availability_zone". (string value)
+#storage_availability_zone = nova
+
+# Default availability zone for new volumes. If not set, the
+# storage_availability_zone option value is used as the default for new
+# volumes. (string value)
+#default_availability_zone = <None>
+
+# If the requested Cinder availability zone is unavailable, fall back to the
+# value of default_availability_zone, then storage_availability_zone, instead
+# of failing. (boolean value)
+allow_availability_zone_fallback = True
+
+# Default volume type to use (string value)
+#default_volume_type = <None>
+default_volume_type = lvm-driver
+
+# Default group type to use (string value)
+#default_group_type = <None>
+
+# Time period for which to generate volume usages. The options are hour, day,
+# month, or year. (string value)
+#volume_usage_audit_period = month
+
+# Path to the rootwrap configuration file to use for running commands as root
+# (string value)
+#rootwrap_config = /etc/cinder/rootwrap.conf
+
+# Enable monkey patching (boolean value)
+#monkey_patch = false
+
+# List of modules/decorators to monkey patch (list value)
+#monkey_patch_modules =
+
+# Maximum time since last check-in for a service to be considered up (integer
+# value)
+#service_down_time = 60
+
+# The full class name of the volume API class to use (string value)
+#volume_api_class = cinder.volume.api.API
+
+# The full class name of the volume backup API class (string value)
+#backup_api_class = cinder.backup.api.API
+
+# The strategy to use for auth. Supports noauth or keystone. (string value)
+# Possible values:
+# noauth - Do not perform authentication
+# keystone - Authenticate using keystone
+#auth_strategy = keystone
+
+# A list of backend names to use. These backend names should be backed by a
+# unique [CONFIG] group with its options (list value)
+#enabled_backends = <None>
+enabled_backends = lvm-driver
+
+# Whether snapshots count against gigabyte quota (boolean value)
+#no_snapshot_gb_quota = false
+
+# The full class name of the volume transfer API class (string value)
+#transfer_api_class = cinder.transfer.api.API
+
+# The full class name of the consistencygroup API class (string value)
+#consistencygroup_api_class = cinder.consistencygroup.api.API
+
+# The full class name of the group API class (string value)
+#group_api_class = cinder.group.api.API
+
+# Log requests to multiple loggers. (boolean value)
+#split_loggers = false
+
+# The full class name of the compute API class to use (string value)
+#compute_api_class = cinder.compute.nova.API
+
+# ID of the project which will be used as the Cinder internal tenant. (string
+# value)
+#cinder_internal_tenant_project_id = <None>
+
+# ID of the user to be used in volume operations as the Cinder internal tenant.
+# (string value)
+#cinder_internal_tenant_user_id = <None>
+
+# Services to be added to the available pool on create (boolean value)
+#enable_new_services = true
+
+# Template string to be used to generate volume names (string value)
+#volume_name_template = volume-%s
+
+# Template string to be used to generate snapshot names (string value)
+#snapshot_name_template = snapshot-%s
+
+# Template string to be used to generate backup names (string value)
+#backup_name_template = backup-%s
+
+# Driver to use for database access (string value)
+#db_driver = cinder.db
+
+# A list of url schemes that can be downloaded directly via the direct_url.
+# Currently supported schemes: [file, cinder]. (list value)
+#allowed_direct_url_schemes =
+
+#
+# Enable image signature verification.
+#
+# Cinder uses the image signature metadata from Glance and
+# verifies the signature of a signed image while downloading
+# that image. There are two options here.
+#
+# 1. ``enabled``: verify when image has signature metadata.
+# 2. ``disabled``: verification is turned off.
+#
+# If the image signature cannot be verified or if the image
+# signature metadata is incomplete when required, then Cinder
+# will not create the volume and update it into an error
+# state. This provides end users with stronger assurances
+# of the integrity of the image data they are using to
+# create volumes.
+#  (string value)
+# Possible values:
+# disabled - <No description provided>
+# enabled - <No description provided>
+#verify_glance_signatures = enabled
+
+# Info to match when looking for glance in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if glance_api_servers are not provided. (string value)
+#glance_catalog_info = image:glance:publicURL
+
+# Default core properties of image (list value)
+#glance_core_properties = checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size
+
+# Directory used for temporary storage during image conversion (string value)
+#image_conversion_dir = $state_path/conversion
+
+# message minimum life in seconds. (integer value)
+#message_ttl = 2592000
+
+# interval between periodic task runs to clean expired messages in seconds.
+# (integer value)
+#message_reap_interval = 86400
+
+# Number of volumes allowed per project (integer value)
+#quota_volumes = 10
+
+# Number of volume snapshots allowed per project (integer value)
+#quota_snapshots = 10
+
+# Number of consistencygroups allowed per project (integer value)
+#quota_consistencygroups = 10
+
+# Number of groups allowed per project (integer value)
+#quota_groups = 10
+
+# Total amount of storage, in gigabytes, allowed for volumes and snapshots per
+# project (integer value)
+#quota_gigabytes = 1000
+
+# Number of volume backups allowed per project (integer value)
+#quota_backups = 10
+
+# Total amount of storage, in gigabytes, allowed for backups per project
+# (integer value)
+#quota_backup_gigabytes = 1000
+
+# Number of seconds until a reservation expires (integer value)
+#reservation_expire = 86400
+
+# Interval between periodic task runs to clean expired reservations in seconds.
+# (integer value)
+#reservation_clean_interval = $reservation_expire
+
+# Count of reservations until usage is refreshed (integer value)
+#until_refresh = 0
+
+# Number of seconds between subsequent usage refreshes (integer value)
+#max_age = 0
+
+# Default driver to use for quota checks (string value)
+#quota_driver = cinder.quota.DbQuotaDriver
+
+# Enables or disables use of default quota class with default quota. (boolean
+# value)
+#use_default_quota_class = true
+
+# Max size allowed per volume, in gigabytes (integer value)
+#per_volume_size_limit = -1
+
+# The scheduler host manager class to use (string value)
+#scheduler_host_manager = cinder.scheduler.host_manager.HostManager
+
+# Maximum number of attempts to schedule a volume (integer value)
+#scheduler_max_attempts = 3
+
+# Which filter class names to use for filtering hosts when not specified in the
+# request. (list value)
+#scheduler_default_filters = AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter
+
+# Which weigher class names to use for weighing hosts. (list value)
+#scheduler_default_weighers = CapacityWeigher
+
+# Which handler to use for selecting the host/pool after weighing (string
+# value)
+#scheduler_weight_handler = cinder.scheduler.weights.OrderedHostWeightHandler
+
+# Default scheduler driver to use (string value)
+#scheduler_driver = cinder.scheduler.filter_scheduler.FilterScheduler
+
+# Absolute path to scheduler configuration JSON file. (string value)
+#scheduler_json_config_location =
+
+# Multiplier used for weighing free capacity. Negative numbers mean to stack vs
+# spread. (floating point value)
+#capacity_weight_multiplier = 1.0
+
+# Multiplier used for weighing allocated capacity. Positive numbers mean to
+# stack vs spread. (floating point value)
+#allocated_capacity_weight_multiplier = -1.0
+
+# Multiplier used for weighing volume number. Negative numbers mean to spread
+# vs stack. (floating point value)
+#volume_number_multiplier = -1.0
+
+# Interval, in seconds, between nodes reporting state to datastore (integer
+# value)
+#report_interval = 10
+
+# Interval, in seconds, between running periodic tasks (integer value)
+#periodic_interval = 60
+
+# Range, in seconds, to randomly delay when starting the periodic task
+# scheduler to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 60
+
+# IP address on which OpenStack Volume API listens (string value)
+osapi_volume_listen = 192.168.10.36
+
+# Port on which OpenStack Volume API listens (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#osapi_volume_listen_port = 8776
+
+# Number of workers for OpenStack Volume API service. The default is equal to
+# the number of CPUs available. (integer value)
+osapi_volume_workers = 4
+
+# Wraps the socket in a SSL context if True is set. A certificate file and key
+# file must be specified. (boolean value)
+#osapi_volume_use_ssl = false
+
+# Option to enable strict host key checking.  When set to "True" Cinder will
+# only connect to systems with a host key present in the configured
+# "ssh_hosts_key_file".  When set to "False" the host key will be saved upon
+# first connection and used for subsequent connections.  Default=False (boolean
+# value)
+#strict_ssh_host_key_policy = false
+
+# File containing SSH host keys for the systems with which Cinder needs to
+# communicate.  OPTIONAL: Default=$state_path/ssh_known_hosts (string value)
+#ssh_hosts_key_file = $state_path/ssh_known_hosts
+
+# The number of characters in the salt. (integer value)
+#volume_transfer_salt_length = 8
+
+# The number of characters in the autogenerated auth key. (integer value)
+#volume_transfer_key_length = 16
+
+# Enables the Force option on upload_to_image. This enables running
+# upload_volume on in-use volumes for backends that support it. (boolean value)
+enable_force_upload = false
+
+# Create volume from snapshot at the host where snapshot resides (boolean
+# value)
+#snapshot_same_host = true
+
+# Ensure that the new volumes are the same AZ as snapshot or source volume
+# (boolean value)
+#cloned_volume_same_az = true
+
+# Cache volume availability zones in memory for the provided duration in
+# seconds (integer value)
+#az_cache_duration = 3600
+
+# Number of times to attempt to run flakey shell commands (integer value)
+#num_shell_tries = 3
+
+# The percentage of backend capacity is reserved (integer value)
+# Minimum value: 0
+# Maximum value: 100
+#reserved_percentage = 0
+
+# Prefix for iSCSI volumes (string value)
+# Deprecated group/name - [DEFAULT]/iscsi_target_prefix
+#target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSCSI daemon is listening on (string value)
+# Deprecated group/name - [DEFAULT]/iscsi_ip_address
+#target_ip_address = $my_ip
+
+# The list of secondary IP addresses of the iSCSI daemon (list value)
+#iscsi_secondary_ip_addresses =
+
+# The port that the iSCSI daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/iscsi_port
+#target_port = 3260
+
+# The maximum number of times to rescan targets to find volume (integer value)
+#num_volume_device_scan_tries = 3
+
+# The backend name for a given driver implementation (string value)
+volume_backend_name = DEFAULT
+
+# Do we attach/detach volumes in cinder using multipath for volume to image and
+# image to volume transfers? (boolean value)
+#use_multipath_for_image_xfer = false
+
+# If this is set to True, attachment of volumes for image transfer will be
+# aborted when multipathd is not running. Otherwise, it will fallback to single
+# path. (boolean value)
+#enforce_multipath_for_image_xfer = false
+
+# Method used to wipe old volumes (string value)
+# Possible values:
+# none - <No description provided>
+# zero - <No description provided>
+volume_clear = none
+
+# Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 => all
+# (integer value)
+# Maximum value: 1024
+#volume_clear_size = 0
+
+# The flag to pass to ionice to alter the i/o priority of the process used to
+# zero a volume after deletion, for example "-c3" for idle only priority.
+# (string value)
+#volume_clear_ionice = <None>
+
+# Target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI
+# support, scstadmin for SCST target support, ietadm for iSCSI Enterprise
+# Target, iscsictl for Chelsio iSCSI Target, nvmet for NVMEoF support, or fake
+# for testing. (string value)
+# Possible values:
+# tgtadm - <No description provided>
+# lioadm - <No description provided>
+# scstadmin - <No description provided>
+# iscsictl - <No description provided>
+# ietadm - <No description provided>
+# nvmet - <No description provided>
+# fake - <No description provided>
+# Deprecated group/name - [DEFAULT]/iscsi_helper
+#target_helper = tgtadm
+
+# Volume configuration file storage directory (string value)
+#volumes_dir = $state_path/volumes
+
+# IET configuration file (string value)
+#iet_conf = /etc/iet/ietd.conf
+
+# Chiscsi (CXT) global defaults configuration file (string value)
+#chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf
+
+# Sets the behavior of the iSCSI target to either perform blockio or fileio
+# optionally, auto can be set and Cinder will autodetect type of backing device
+# (string value)
+# Possible values:
+# blockio - <No description provided>
+# fileio - <No description provided>
+# auto - <No description provided>
+#iscsi_iotype = fileio
+
+# The default block size used when copying/clearing volumes (string value)
+#volume_dd_blocksize = 1M
+
+# The blkio cgroup name to be used to limit bandwidth of volume copy (string
+# value)
+#volume_copy_blkio_cgroup_name = cinder-volume-copy
+
+# The upper limit of bandwidth of volume copy. 0 => unlimited (integer value)
+#volume_copy_bps_limit = 0
+
+# Sets the behavior of the iSCSI target to either perform write-back(on) or
+# write-through(off). This parameter is valid if target_helper is set to
+# tgtadm. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+#iscsi_write_cache = on
+
+# Sets the target-specific flags for the iSCSI target. Only used for tgtadm to
+# specify backing device flags using bsoflags option. The specified string is
+# passed as is to the underlying tool. (string value)
+#iscsi_target_flags =
+
+# Determines the target protocol for new volumes, created with tgtadm, lioadm
+# and nvmet target helpers. In order to enable RDMA, this parameter should be
+# set with the value "iser". The supported iSCSI protocol values are "iscsi"
+# and "iser", in case of nvmet target set to "nvmet_rdma". (string value)
+# Possible values:
+# iscsi - <No description provided>
+# iser - <No description provided>
+# nvmet_rdma - <No description provided>
+# Deprecated group/name - [DEFAULT]/iscsi_protocol
+#target_protocol = iscsi
+
+# The path to the client certificate key for verification, if the driver
+# supports it. (string value)
+#driver_client_cert_key = <None>
+
+# The path to the client certificate for verification, if the driver supports
+# it. (string value)
+#driver_client_cert = <None>
+
+# Tell driver to use SSL for connection to backend storage if the driver
+# supports it. (boolean value)
+#driver_use_ssl = false
+
+# Representation of the over subscription ratio when thin provisioning is
+# enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times
+# of the total physical capacity. If the ratio is 10.5, it means provisioned
+# capacity can be 10.5 times of the total physical capacity. A ratio of 1.0
+# means provisioned capacity cannot exceed the total physical capacity. If
+# ratio is 'auto', Cinder will automatically calculate the ratio based on the
+# provisioned capacity and the used space. If not set to auto, the ratio has to
+# be a minimum of 1.0. (string value)
+#max_over_subscription_ratio = 20.0
+
+# Certain ISCSI targets have predefined target names, SCST target driver uses
+# this name. (string value)
+#scst_target_iqn_name = <None>
+
+# SCST target implementation can choose from multiple SCST target drivers.
+# (string value)
+#scst_target_driver = iscsi
+
+# Option to enable/disable CHAP authentication for targets. (boolean value)
+#use_chap_auth = false
+
+# CHAP user name. (string value)
+#chap_username =
+
+# Password for specified CHAP account name. (string value)
+#chap_password =
+
+# Namespace for driver private data values to be saved in. (string value)
+#driver_data_namespace = <None>
+
+# String representation for an equation that will be used to filter hosts. Only
+# used when the driver filter is set to be used by the Cinder scheduler.
+# (string value)
+#filter_function = <None>
+
+# String representation for an equation that will be used to determine the
+# goodness of a host. Only used when using the goodness weigher is set to be
+# used by the Cinder scheduler. (string value)
+#goodness_function = <None>
+
+# If set to True the http client will validate the SSL certificate of the
+# backend endpoint. (boolean value)
+#driver_ssl_cert_verify = false
+
+# Can be used to specify a non default path to a CA_BUNDLE file or directory
+# with certificates of trusted CAs, which will be used to validate the backend
+# (string value)
+#driver_ssl_cert_path = <None>
+
+# List of options that control which trace info is written to the DEBUG log
+# level to assist developers. Valid values are method and api. (list value)
+#trace_flags = <None>
+
+# Multi opt of dictionaries to represent a replication target device.  This
+# option may be specified multiple times in a single config section to specify
+# multiple replication target devices.  Each entry takes the standard dict
+# config form: replication_device =
+# target_device_id:<required>,key1:value1,key2:value2... (dict value)
+#replication_device = <None>
+
+# If set to True, upload-to-image in raw format will create a cloned volume and
+# register its location to the image service, instead of uploading the volume
+# content. The cinder backend and locations support must be enabled in the
+# image service. (boolean value)
+#image_upload_use_cinder_backend = false
+
+# If set to True, the image volume created by upload-to-image will be placed in
+# the internal tenant. Otherwise, the image volume is created in the current
+# context's tenant. (boolean value)
+#image_upload_use_internal_tenant = false
+
+# Enable the image volume cache for this backend. (boolean value)
+#image_volume_cache_enabled = false
+
+# Max size of the image volume cache for this backend in GB. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_size_gb = 0
+
+# Max number of entries allowed in the image volume cache. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_count = 0
+
+# Report to clients of Cinder that the backend supports discard (aka.
+# trim/unmap). This will not actually change the behavior of the backend or the
+# client directly, it will only notify that it can be used. (boolean value)
+#report_discard_supported = false
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#storage_protocol = iscsi
+
+# If this is set to True, a temporary snapshot will be created for performing
+# non-disruptive backups. Otherwise a temporary volume will be cloned in order
+# to perform a backup. (boolean value)
+#backup_use_temp_snapshot = false
+
+# Set this to True when you want to allow an unsupported driver to start.
+# Drivers that haven't maintained a working CI system and testing are marked as
+# unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+# Availability zone for this volume backend. If not set, the
+# storage_availability_zone option value is used as the default for all
+# backends. (string value)
+#backend_availability_zone = <None>
+
+# The maximum number of times to rescan iSER targetto find volume (integer
+# value)
+#num_iser_scan_tries = 3
+
+# Prefix for iSER volumes (string value)
+#iser_target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSER daemon is listening on (string value)
+#iser_ip_address = $my_ip
+
+# The port that the iSER daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#iser_port = 3260
+
+# The name of the iSER target user-land tool to use (string value)
+#iser_helper = tgtadm
+
+# The port that the NVMe target is listening on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nvmet_port_id = 1
+
+# The namespace id associated with the subsystem that will be created with the
+# path for the LVM volume. (integer value)
+#nvmet_ns_id = 10
+
+# DataCore virtual disk type (single/mirrored). Mirrored virtual disks require
+# two storage servers in the server group. (string value)
+# Possible values:
+# single - <No description provided>
+# mirrored - <No description provided>
+#datacore_disk_type = single
+
+# DataCore virtual disk storage profile. (string value)
+#datacore_storage_profile = <None>
+
+# List of DataCore disk pools that can be used by volume driver. (list value)
+#datacore_disk_pools =
+
+# Seconds to wait for a response from a DataCore API call. (integer value)
+# Minimum value: 1
+#datacore_api_timeout = 300
+
+# Seconds to wait for DataCore virtual disk to come out of the "Failed" state.
+# (integer value)
+# Minimum value: 0
+#datacore_disk_failed_delay = 15
+
+# List of iSCSI targets that cannot be used to attach volume. To prevent the
+# DataCore iSCSI volume driver from using some front-end targets in volume
+# attachment, specify this option and list the iqn and target machine for each
+# target as the value, such as <iqn:target name>, <iqn:target name>,
+# <iqn:target name>. (list value)
+#datacore_iscsi_unallowed_targets =
+
+# Configure CHAP authentication for iSCSI connections. (boolean value)
+#datacore_iscsi_chap_enabled = false
+
+# iSCSI CHAP authentication password storage file. (string value)
+#datacore_iscsi_chap_storage = <None>
+
+# Storage system autoexpand parameter for volumes (True/False) (boolean value)
+#instorage_mcs_vol_autoexpand = true
+
+# Storage system compression option for volumes (boolean value)
+#instorage_mcs_vol_compression = false
+
+# Enable InTier for volumes (boolean value)
+#instorage_mcs_vol_intier = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#instorage_mcs_allow_tenant_qos = false
+
+# Storage system grain size parameter for volumes (32/64/128/256) (integer
+# value)
+# Minimum value: 32
+# Maximum value: 256
+#instorage_mcs_vol_grainsize = 256
+
+# Storage system space-efficiency parameter for volumes (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#instorage_mcs_vol_rsize = 2
+
+# Storage system threshold for volume capacity warnings (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#instorage_mcs_vol_warning = 0
+
+# Maximum number of seconds to wait for LocalCopy to be prepared. (integer
+# value)
+# Minimum value: 1
+# Maximum value: 600
+#instorage_mcs_localcopy_timeout = 120
+
+# Specifies the InStorage LocalCopy copy rate to be used when creating a full
+# volume copy. The default is rate is 50, and the valid rates are 1-100.
+# (integer value)
+# Minimum value: 1
+# Maximum value: 100
+#instorage_mcs_localcopy_rate = 50
+
+# The I/O group in which to allocate volumes. It can be a comma-separated list
+# in which case the driver will select an io_group based on least number of
+# volumes associated with the io_group. (string value)
+#instorage_mcs_vol_iogrp = 0
+
+# Specifies secondary management IP or hostname to be used if san_ip is invalid
+# or becomes inaccessible. (string value)
+#instorage_san_secondary_ip = <None>
+
+# Comma separated list of storage system storage pools for volumes. (list
+# value)
+#instorage_mcs_volpool_name = volpool
+
+# Configure CHAP authentication for iSCSI connections (Default: Enabled)
+# (boolean value)
+#instorage_mcs_iscsi_chap_enabled = true
+
+# The StorPool template for volumes with no type. (string value)
+#storpool_template = <None>
+
+# The default StorPool chain replication value.  Used when creating a volume
+# with no specified type if storpool_template is not set.  Also used for
+# calculating the apparent free space reported in the stats. (integer value)
+#storpool_replication = 3
+
+# Create sparse Lun. (boolean value)
+#vrts_lun_sparse = true
+
+# VA config file. (string value)
+#vrts_target_config = /etc/cinder/vrts_target.xml
+
+# Timeout for creating the volume to migrate to when performing volume
+# migration (seconds) (integer value)
+#migration_create_volume_timeout_secs = 300
+
+# Offload pending volume delete during volume service startup (boolean value)
+#volume_service_inithost_offload = false
+
+# FC Zoning mode configured, only 'fabric' is supported now. (string value)
+#zoning_mode = <None>
+
+# Sets the value of TCP_KEEPALIVE (True/False) for each server socket. (boolean
+# value)
+#tcp_keepalive = true
+
+# Sets the value of TCP_KEEPINTVL in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepalive_interval = <None>
+
+# Sets the value of TCP_KEEPCNT for each server socket. Not supported on OS X.
+# (integer value)
+#tcp_keepalive_count = <None>
+
+#
+# From oslo.config
+#
+
+# Path to a config file to use. Multiple config files can be specified, with
+# values in later files taking precedence. Defaults to %(default)s. (unknown
+# value)
+#config_file = ~/.project/project.conf,~/project.conf,/etc/project/project.conf,/etc/project.conf
+
+# Path to a config directory to pull `*.conf` files from. This file set is
+# sorted, so as to provide a predictable parse order if individual options are
+# over-ridden. The set is parsed after the file(s) specified via previous
+# --config-file, arguments hence over-ridden options in the directory take
+# precedence. (list value)
+#config_dir = ~/.project/project.conf.d/,~/project.conf.d/,/etc/project/project.conf.d/,/etc/project.conf.d/
+
+# Lists configuration groups that provide more details for accessing
+# configuration settings from locations other than local files. (list value)
+#config_source =
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+#log_config_append = <None>
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you may wish
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
+# ignored if log_config_append is set. (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined. (string
+# value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message. (string
+# value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message. (string
+# value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout = 3600
+
+# The network address and optional user credentials for connecting to the
+# messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = keystone
+control_exchange = cinder
+
+
+#
+# From oslo.service.periodic_task
+#
+
+# Some periodic tasks can be run in a separate process. Should we run them
+# here? (boolean value)
+#run_external_periodic_tasks = true
+
+#
+# From oslo.service.service
+#
+
+# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
+# <start>:<end>, where 0 results in listening on a random tcp port number;
+# <port> results in listening on the specified port number (and not enabling
+# backdoor if that port is in use); and <start>:<end> results in listening on
+# the smallest unused port number within the specified range of port numbers.
+# The chosen port is displayed in the service's log file. (string value)
+#backdoor_port = <None>
+
+# Enable eventlet backdoor, using the provided path as a unix socket that can
+# receive connections. This option is mutually exclusive with 'backdoor_port'
+# in that only one should be provided. If both are provided then the existence
+# of this option overrides the usage of that option. (string value)
+#backdoor_socket = <None>
+
+# Enables or disables logging values of all registered options when starting a
+# service (at DEBUG level). (boolean value)
+#log_options = true
+
+# Specify a timeout after which a gracefully shutdown server will exit. Zero
+# value means endless wait. (integer value)
+#graceful_shutdown_timeout = 60
+
+#
+# From oslo.service.wsgi
+#
+
+# File name for the paste.deploy config for api service (string value)
+#api_paste_config = api-paste.ini
+
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
+#wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f
+
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepidle = 600
+
+# Size of the pool of greenthreads used by wsgi (integer value)
+#wsgi_default_pool_size = 100
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated when
+# keystone is configured to use PKI tokens with big service catalogs). (integer
+# value)
+#max_header_line = 16384
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+
+[backend]
+
+#
+# From cinder
+#
+
+# Backend override of host value. (string value)
+#backend_host = <None>
+[lvm-driver]
+host=ctl01
+volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+volume_backend_name=lvm-driver
 iscsi_helper = tgtadm
-volume_name_template = volume-%s
-volume_group = cinder-volumes
-verbose = True
-auth_strategy = keystone
-state_path = /var/lib/cinder
-lock_path = /var/lock/cinder
-volumes_dir = /var/lib/cinder/volumes
-enabled_backends = lvm
+volume_group = cinder-volume
+
+
+[backend_defaults]
+
+#
+# From cinder
+#
+
+# Number of times to attempt to run flakey shell commands (integer value)
+#num_shell_tries = 3
+
+# The percentage of backend capacity is reserved (integer value)
+# Minimum value: 0
+# Maximum value: 100
+#reserved_percentage = 0
+
+# Prefix for iSCSI volumes (string value)
+# Deprecated group/name - [backend_defaults]/iscsi_target_prefix
+#target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSCSI daemon is listening on (string value)
+# Deprecated group/name - [backend_defaults]/iscsi_ip_address
+#target_ip_address = $my_ip
+
+# The list of secondary IP addresses of the iSCSI daemon (list value)
+#iscsi_secondary_ip_addresses =
+
+# The port that the iSCSI daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [backend_defaults]/iscsi_port
+#target_port = 3260
+
+# The maximum number of times to rescan targets to find volume (integer value)
+#num_volume_device_scan_tries = 3
+
+# The backend name for a given driver implementation (string value)
+#volume_backend_name = <None>
+
+# Do we attach/detach volumes in cinder using multipath for volume to image and
+# image to volume transfers? (boolean value)
+#use_multipath_for_image_xfer = false
+
+# If this is set to True, attachment of volumes for image transfer will be
+# aborted when multipathd is not running. Otherwise, it will fallback to single
+# path. (boolean value)
+#enforce_multipath_for_image_xfer = false
+
+# Method used to wipe old volumes (string value)
+# Possible values:
+# none - <No description provided>
+# zero - <No description provided>
+#volume_clear = zero
+
+# Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 => all
+# (integer value)
+# Maximum value: 1024
+#volume_clear_size = 0
+
+# The flag to pass to ionice to alter the i/o priority of the process used to
+# zero a volume after deletion, for example "-c3" for idle only priority.
+# (string value)
+#volume_clear_ionice = <None>
+
+# Target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI
+# support, scstadmin for SCST target support, ietadm for iSCSI Enterprise
+# Target, iscsictl for Chelsio iSCSI Target, nvmet for NVMEoF support, or fake
+# for testing. (string value)
+# Possible values:
+# tgtadm - <No description provided>
+# lioadm - <No description provided>
+# scstadmin - <No description provided>
+# iscsictl - <No description provided>
+# ietadm - <No description provided>
+# nvmet - <No description provided>
+# fake - <No description provided>
+# Deprecated group/name - [backend_defaults]/iscsi_helper
+#target_helper = tgtadm
+
+# Volume configuration file storage directory (string value)
+#volumes_dir = $state_path/volumes
+
+# IET configuration file (string value)
+#iet_conf = /etc/iet/ietd.conf
+
+# Chiscsi (CXT) global defaults configuration file (string value)
+#chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf
+
+# Sets the behavior of the iSCSI target to either perform blockio or fileio
+# optionally, auto can be set and Cinder will autodetect type of backing device
+# (string value)
+# Possible values:
+# blockio - <No description provided>
+# fileio - <No description provided>
+# auto - <No description provided>
+#iscsi_iotype = fileio
+
+# The default block size used when copying/clearing volumes (string value)
+#volume_dd_blocksize = 1M
+
+# The blkio cgroup name to be used to limit bandwidth of volume copy (string
+# value)
+#volume_copy_blkio_cgroup_name = cinder-volume-copy
+
+# The upper limit of bandwidth of volume copy. 0 => unlimited (integer value)
+#volume_copy_bps_limit = 0
+
+# Sets the behavior of the iSCSI target to either perform write-back(on) or
+# write-through(off). This parameter is valid if target_helper is set to
+# tgtadm. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+#iscsi_write_cache = on
+
+# Sets the target-specific flags for the iSCSI target. Only used for tgtadm to
+# specify backing device flags using bsoflags option. The specified string is
+# passed as is to the underlying tool. (string value)
+#iscsi_target_flags =
+
+# Determines the target protocol for new volumes, created with tgtadm, lioadm
+# and nvmet target helpers. In order to enable RDMA, this parameter should be
+# set with the value "iser". The supported iSCSI protocol values are "iscsi"
+# and "iser", in case of nvmet target set to "nvmet_rdma". (string value)
+# Possible values:
+# iscsi - <No description provided>
+# iser - <No description provided>
+# nvmet_rdma - <No description provided>
+# Deprecated group/name - [backend_defaults]/iscsi_protocol
+#target_protocol = iscsi
+
+# The path to the client certificate key for verification, if the driver
+# supports it. (string value)
+#driver_client_cert_key = <None>
+
+# The path to the client certificate for verification, if the driver supports
+# it. (string value)
+#driver_client_cert = <None>
+
+# Tell driver to use SSL for connection to backend storage if the driver
+# supports it. (boolean value)
+#driver_use_ssl = false
+
+# Representation of the over subscription ratio when thin provisioning is
+# enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times
+# of the total physical capacity. If the ratio is 10.5, it means provisioned
+# capacity can be 10.5 times of the total physical capacity. A ratio of 1.0
+# means provisioned capacity cannot exceed the total physical capacity. If
+# ratio is 'auto', Cinder will automatically calculate the ratio based on the
+# provisioned capacity and the used space. If not set to auto, the ratio has to
+# be a minimum of 1.0. (string value)
+#max_over_subscription_ratio = 20.0
+
+# Certain ISCSI targets have predefined target names, SCST target driver uses
+# this name. (string value)
+#scst_target_iqn_name = <None>
+
+# SCST target implementation can choose from multiple SCST target drivers.
+# (string value)
+#scst_target_driver = iscsi
+
+# Option to enable/disable CHAP authentication for targets. (boolean value)
+#use_chap_auth = false
+
+# CHAP user name. (string value)
+#chap_username =
+
+# Password for specified CHAP account name. (string value)
+#chap_password =
+
+# Namespace for driver private data values to be saved in. (string value)
+#driver_data_namespace = <None>
+
+# String representation for an equation that will be used to filter hosts. Only
+# used when the driver filter is set to be used by the Cinder scheduler.
+# (string value)
+#filter_function = <None>
+
+# String representation for an equation that will be used to determine the
+# goodness of a host. Only used when using the goodness weigher is set to be
+# used by the Cinder scheduler. (string value)
+#goodness_function = <None>
+
+# If set to True the http client will validate the SSL certificate of the
+# backend endpoint. (boolean value)
+#driver_ssl_cert_verify = false
+
+# Can be used to specify a non default path to a CA_BUNDLE file or directory
+# with certificates of trusted CAs, which will be used to validate the backend
+# (string value)
+#driver_ssl_cert_path = <None>
+
+# List of options that control which trace info is written to the DEBUG log
+# level to assist developers. Valid values are method and api. (list value)
+#trace_flags = <None>
+
+# Multi opt of dictionaries to represent a replication target device.  This
+# option may be specified multiple times in a single config section to specify
+# multiple replication target devices.  Each entry takes the standard dict
+# config form: replication_device =
+# target_device_id:<required>,key1:value1,key2:value2... (dict value)
+#replication_device = <None>
+
+# If set to True, upload-to-image in raw format will create a cloned volume and
+# register its location to the image service, instead of uploading the volume
+# content. The cinder backend and locations support must be enabled in the
+# image service. (boolean value)
+#image_upload_use_cinder_backend = false
+
+# If set to True, the image volume created by upload-to-image will be placed in
+# the internal tenant. Otherwise, the image volume is created in the current
+# context's tenant. (boolean value)
+#image_upload_use_internal_tenant = false
+
+# Enable the image volume cache for this backend. (boolean value)
+#image_volume_cache_enabled = false
+
+# Max size of the image volume cache for this backend in GB. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_size_gb = 0
+
+# Max number of entries allowed in the image volume cache. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_count = 0
+
+# Report to clients of Cinder that the backend supports discard (aka.
+# trim/unmap). This will not actually change the behavior of the backend or the
+# client directly, it will only notify that it can be used. (boolean value)
+#report_discard_supported = false
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#storage_protocol = iscsi
+
+# If this is set to True, a temporary snapshot will be created for performing
+# non-disruptive backups. Otherwise a temporary volume will be cloned in order
+# to perform a backup. (boolean value)
+#backup_use_temp_snapshot = false
+
+# Set this to True when you want to allow an unsupported driver to start.
+# Drivers that haven't maintained a working CI system and testing are marked as
+# unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+# Availability zone for this volume backend. If not set, the
+# storage_availability_zone option value is used as the default for all
+# backends. (string value)
+#backend_availability_zone = <None>
+
+# The maximum number of times to rescan iSER targetto find volume (integer
+# value)
+#num_iser_scan_tries = 3
+
+# Prefix for iSER volumes (string value)
+#iser_target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSER daemon is listening on (string value)
+#iser_ip_address = $my_ip
+
+# The port that the iSER daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#iser_port = 3260
+
+# The name of the iSER target user-land tool to use (string value)
+#iser_helper = tgtadm
+
+# The port that the NVMe target is listening on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nvmet_port_id = 1
+
+# The namespace id associated with the subsystem that will be created with the
+# path for the LVM volume. (integer value)
+#nvmet_ns_id = 10
+
+# Hostname for the CoprHD Instance (string value)
+#coprhd_hostname = <None>
+
+# Port for the CoprHD Instance (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#coprhd_port = 4443
+
+# Username for accessing the CoprHD Instance (string value)
+#coprhd_username = <None>
+
+# Password for accessing the CoprHD Instance (string value)
+#coprhd_password = <None>
+
+# Tenant to utilize within the CoprHD Instance (string value)
+#coprhd_tenant = <None>
+
+# Project to utilize within the CoprHD Instance (string value)
+#coprhd_project = <None>
+
+# Virtual Array to utilize within the CoprHD Instance (string value)
+#coprhd_varray = <None>
+
+# True | False to indicate if the storage array in CoprHD is VMAX or VPLEX
+# (boolean value)
+#coprhd_emulate_snapshot = false
+
+# Rest Gateway IP or FQDN for Scaleio (string value)
+#coprhd_scaleio_rest_gateway_host = None
+
+# Rest Gateway Port for Scaleio (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#coprhd_scaleio_rest_gateway_port = 4984
+
+# Username for Rest Gateway (string value)
+#coprhd_scaleio_rest_server_username = <None>
+
+# Rest Gateway Password (string value)
+#coprhd_scaleio_rest_server_password = <None>
+
+# verify server certificate (boolean value)
+#scaleio_verify_server_certificate = false
+
+# Server certificate path (string value)
+#scaleio_server_certificate_path = <None>
+
+# Datera API port. (string value)
+#datera_api_port = 7717
+
+# DEPRECATED: Datera API version. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#datera_api_version = 2
+
+# Timeout for HTTP 503 retry messages (integer value)
+#datera_503_timeout = 120
+
+# Interval between 503 retries (integer value)
+#datera_503_interval = 5
+
+# True to set function arg and return logging (boolean value)
+#datera_debug = false
+
+# ONLY FOR DEBUG/TESTING PURPOSES
+# True to set replica_count to 1 (boolean value)
+#datera_debug_replica_count_override = false
+
+# If set to 'Map' --> OpenStack project ID will be mapped implicitly to Datera
+# tenant ID
+# If set to 'None' --> Datera tenant ID will not be used during volume
+# provisioning
+# If set to anything else --> Datera tenant ID will be the provided value
+# (string value)
+#datera_tenant_id = <None>
+
+# Set to True to disable profiling in the Datera driver (boolean value)
+#datera_disable_profiler = false
+
+# Group name to use for creating volumes. Defaults to "group-0". (string value)
+#eqlx_group_name = group-0
+
+# Maximum retry count for reconnection. Default is 5. (integer value)
+# Minimum value: 0
+#eqlx_cli_max_retries = 5
+
+# Pool in which volumes will be created. Defaults to "default". (string value)
+#eqlx_pool = default
+
+# Storage Center System Serial Number (integer value)
+#dell_sc_ssn = 64702
+
+# Dell API port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#dell_sc_api_port = 3033
+
+# Name of the server folder to use on the Storage Center (string value)
+#dell_sc_server_folder = openstack
+
+# Name of the volume folder to use on the Storage Center (string value)
+#dell_sc_volume_folder = openstack
+
+# Enable HTTPS SC certificate verification (boolean value)
+#dell_sc_verify_cert = false
+
+# IP address of secondary DSM controller (string value)
+#secondary_san_ip =
+
+# Secondary DSM user name (string value)
+#secondary_san_login = Admin
+
+# Secondary DSM user password name (string value)
+#secondary_san_password =
+
+# Secondary Dell API port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#secondary_sc_api_port = 3033
+
+# Dell SC API async call default timeout in seconds. (integer value)
+#dell_api_async_rest_timeout = 15
+
+# Dell SC API sync call default timeout in seconds. (integer value)
+#dell_api_sync_rest_timeout = 30
+
+# Domain IP to be excluded from iSCSI returns. (IP address value)
+#excluded_domain_ip = <None>
+
+# Server OS type to use when creating a new server on the Storage Center.
+# (string value)
+#dell_server_os = Red Hat Linux 6.x
+
+# Gateway REST server port. (string value)
+#sio_rest_server_port = 443
+
+# Verify server certificate. (boolean value)
+#sio_verify_server_certificate = false
+
+# Server certificate path. (string value)
+#sio_server_certificate_path = <None>
+
+# Round volume sizes up to 8GB boundaries. VxFlex OS/ScaleIO requires volumes
+# to be sized in multiples of 8GB. If set to False, volume creation will fail
+# for volumes not sized properly (boolean value)
+#sio_round_volume_capacity = true
+
+# Unmap volumes before deletion. (boolean value)
+#sio_unmap_volume_before_deletion = false
+
+# Storage Pools. Comma separated list of storage pools used to provide volumes.
+# Each pool should be specified as a protection_domain_name:storage_pool_name
+# value (string value)
+#sio_storage_pools = <None>
+
+# DEPRECATED: Protection Domain ID. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_protection_domain_id = <None>
+
+# DEPRECATED: Protection Domain name. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_protection_domain_name = <None>
+
+# DEPRECATED: Storage Pool name. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_storage_pool_name = <None>
+
+# DEPRECATED: Storage Pool ID. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_storage_pool_id = <None>
+
+# VxFlex OS/ScaleIO API version. This value should be left as the default value
+# unless otherwise instructed by technical support. (string value)
+#sio_server_api_version = <None>
+
+# max_over_subscription_ratio setting for the driver. Maximum value allowed is
+# 10.0. (floating point value)
+#sio_max_over_subscription_ratio = 10.0
+
+# Allow volumes to be created in Storage Pools when zero padding is disabled.
+# This option should not be enabled if multiple tenants will utilize volumes
+# from a shared Storage Pool. (boolean value)
+#sio_allow_non_padded_volumes = false
+
+# A comma-separated list of storage pool names to be used. (list value)
+#unity_storage_pool_names =
+
+# A comma-separated list of iSCSI or FC ports to be used. Each port can be
+# Unix-style glob expressions. (list value)
+#unity_io_ports =
+
+# To remove the host from Unity when the last LUN is detached from it. By
+# default, it is False. (boolean value)
+#remove_empty_host = false
+
+# Use this value to specify length of the interval in seconds. (integer value)
+#interval = 3
+
+# Use this value to specify number of retries. (integer value)
+#retries = 200
+
+# Use this value to specify the maximum number of unlinks for the temporary
+# snapshots before a clone operation. (integer value)
+#vmax_snapvx_unlink_limit = 3
+
+# Use this value to enable the initiator_check. (boolean value)
+#initiator_check = false
+
+# DEPRECATED: REST server port number. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 13.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Unisphere port should now be set using the common san_api_port config
+# option instead.
+#san_rest_port = 8443
+
+# Serial number of the array to connect to. (string value)
+#vmax_array = <None>
+
+# Storage resource pool on array to use for provisioning. (string value)
+#vmax_srp = <None>
+
+# Service level to use for provisioning storage. Setting this as an extra spec
+# in pool_name is preferable. (string value)
+#vmax_service_level = <None>
+
+# Workload, setting this as an extra spec in pool_name is preferable. (string
+# value)
+#vmax_workload = <None>
+
+# List of port groups containing frontend ports configured prior for server
+# connection. (list value)
+#vmax_port_groups = <None>
+
+# VNX authentication scope type. By default, the value is global. (string
+# value)
+#storage_vnx_authentication_type = global
+
+# Directory path that contains the VNX security file. Make sure the security
+# file is generated first. (string value)
+#storage_vnx_security_file_dir = <None>
+
+# Naviseccli Path. (string value)
+#naviseccli_path = <None>
+
+# Comma-separated list of storage pool names to be used. (list value)
+#storage_vnx_pool_names = <None>
+
+# Default timeout for CLI operations in minutes. For example, LUN migration is
+# a typical long running operation, which depends on the LUN size and the load
+# of the array. An upper bound in the specific deployment can be set to avoid
+# unnecessary long wait. By default, it is 365 days long. (integer value)
+#default_timeout = 31536000
+
+# Default max number of LUNs in a storage group. By default, the value is 255.
+# (integer value)
+#max_luns_per_storage_group = 255
+
+# To destroy storage group when the last LUN is removed from it. By default,
+# the value is False. (boolean value)
+#destroy_empty_storage_group = false
+
+# Mapping between hostname and its iSCSI initiator IP addresses. (string value)
+#iscsi_initiators = <None>
+
+# Comma separated iSCSI or FC ports to be used in Nova or Cinder. (list value)
+#io_port_list = <None>
+
+# Automatically register initiators. By default, the value is False. (boolean
+# value)
+#initiator_auto_registration = false
+
+# Automatically deregister initiators after the related storage group is
+# destroyed. By default, the value is False. (boolean value)
+#initiator_auto_deregistration = false
+
+# DEPRECATED: Report free_capacity_gb as 0 when the limit to maximum number of
+# pool LUNs is reached. By default, the value is False. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#check_max_pool_luns_threshold = false
+
+# Delete a LUN even if it is in Storage Groups. By default, the value is False.
+# (boolean value)
+#force_delete_lun_in_storagegroup = false
+
+# Force LUN creation even if the full threshold of pool is reached. By default,
+# the value is False. (boolean value)
+#ignore_pool_full_threshold = false
+
+# XMS cluster id in multi-cluster environment (string value)
+#xtremio_cluster_name =
+
+# Number of retries in case array is busy (integer value)
+#xtremio_array_busy_retry_count = 5
+
+# Interval between retries in case array is busy (integer value)
+#xtremio_array_busy_retry_interval = 5
+
+# Number of volumes created from each cached glance image (integer value)
+#xtremio_volumes_per_glance_cache = 100
+
+# Should the driver remove initiator groups with no volumes after the last
+# connection was terminated. Since the behavior till now was to leave the IG
+# be, we default to False (not deleting IGs without connected volumes); setting
+# this parameter to True will remove any IG after terminating its connection to
+# the last volume. (boolean value)
+#xtremio_clean_unused_ig = false
+
+# The IP of DMS client socket server (IP address value)
+#disco_client = 127.0.0.1
+
+# The port to connect DMS client socket server (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#disco_client_port = 9898
+
+# DEPRECATED: Path to the wsdl file to communicate with DISCO request manager
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#disco_wsdl_path = /etc/cinder/DISCOService.wsdl
+
+# DEPRECATED: The IP address of the REST server (IP address value)
+# Deprecated group/name - [DEFAULT]/rest_ip
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Using san_ip later
+#disco_rest_ip = <None>
+
+# Use soap client or rest client for communicating with DISCO. Possible values
+# are "soap" or "rest". (string value)
+# Possible values:
+# soap - <No description provided>
+# rest - <No description provided>
+# Deprecated group/name - [DEFAULT]/choice_client
+#disco_choice_client = <None>
+
+# DEPRECATED: The port of DISCO source API (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Using san_api_port later
+#disco_src_api_port = 8080
+
+# Prefix before volume name to differentiate DISCO volume created through
+# openstack and the other ones (string value)
+# Deprecated group/name - [backend_defaults]/volume_name_prefix
+#disco_volume_name_prefix = openstack-
+
+# How long we check whether a snapshot is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/snapshot_check_timeout
+#disco_snapshot_check_timeout = 3600
+
+# How long we check whether a restore is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/restore_check_timeout
+#disco_restore_check_timeout = 3600
+
+# How long we check whether a clone is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/clone_check_timeout
+#disco_clone_check_timeout = 3600
+
+# How long we wait before retrying to get an item detail (integer value)
+# Deprecated group/name - [backend_defaults]/retry_interval
+#disco_retry_interval = 1
+
+# Number of nodes that should replicate the data. (integer value)
+#drbdmanage_redundancy = 1
+
+# Resource deployment completion wait policy. (string value)
+#drbdmanage_resource_policy = {"ratio": "0.51", "timeout": "60"}
+
+# Disk options to set on new resources. See http://www.drbd.org/en/doc/users-
+# guide-90/re-drbdconf for all the details. (string value)
+#drbdmanage_disk_options = {"c-min-rate": "4M"}
+
+# Net options to set on new resources. See http://www.drbd.org/en/doc/users-
+# guide-90/re-drbdconf for all the details. (string value)
+#drbdmanage_net_options = {"connect-int": "4", "allow-two-primaries": "yes", "ko-count": "30", "max-buffers": "20000", "ping-timeout": "100"}
+
+# Resource options to set on new resources. See http://www.drbd.org/en/doc
+# /users-guide-90/re-drbdconf for all the details. (string value)
+#drbdmanage_resource_options = {"auto-promote-timeout": "300"}
+
+# Snapshot completion wait policy. (string value)
+#drbdmanage_snapshot_policy = {"count": "1", "timeout": "60"}
+
+# Volume resize completion wait policy. (string value)
+#drbdmanage_resize_policy = {"timeout": "60"}
+
+# Resource deployment completion wait plugin. (string value)
+#drbdmanage_resource_plugin = drbdmanage.plugins.plugins.wait_for.WaitForResource
+
+# Snapshot completion wait plugin. (string value)
+#drbdmanage_snapshot_plugin = drbdmanage.plugins.plugins.wait_for.WaitForSnapshot
+
+# Volume resize completion wait plugin. (string value)
+#drbdmanage_resize_plugin = drbdmanage.plugins.plugins.wait_for.WaitForVolumeSize
+
+# If set, the c-vol node will receive a useable /dev/drbdX device, even if the
+# actual data is stored on other nodes only. This is useful for debugging,
+# maintenance, and to be able to do the iSCSI export from the c-vol node.
+# (boolean value)
+#drbdmanage_devs_on_controller = true
+
+# config file for cinder eternus_dx volume driver (string value)
+#cinder_eternus_config_file = /etc/cinder/cinder_fujitsu_eternus_dx.xml
+
+# The flag of thin storage allocation. (boolean value)
+#dsware_isthin = false
+
+# Fusionstorage manager ip addr for cinder-volume. (string value)
+#dsware_manager =
+
+# Fusionstorage agent ip addr range. (string value)
+#fusionstorageagent =
+
+# Pool type, like sata-2copy. (string value)
+#pool_type = default
+
+# Pool id permit to use. (list value)
+#pool_id_filter =
+
+# Create clone volume timeout. (integer value)
+#clone_volume_timeout = 680
+
+# Space network name to use for data transfer (string value)
+#hgst_net = Net 1 (IPv4)
+
+# Comma separated list of Space storage servers:devices. ex:
+# os1_stor:gbd0,os2_stor:gbd0 (string value)
+#hgst_storage_servers = os:gbd0
+
+# Should spaces be redundantly stored (1/0) (string value)
+#hgst_redundancy = 0
+
+# User to own created spaces (string value)
+#hgst_space_user = root
+
+# Group to own created spaces (string value)
+#hgst_space_group = disk
+
+# UNIX mode for created spaces (string value)
+#hgst_space_mode = 0600
+
+# 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 (string value)
+#hpe3par_api_url =
+
+# 3PAR username with the 'edit' role (string value)
+#hpe3par_username =
+
+# 3PAR password for the user specified in hpe3par_username (string value)
+#hpe3par_password =
+
+# List of the CPG(s) to use for volume creation (list value)
+#hpe3par_cpg = OpenStack
+
+# The CPG to use for Snapshots for volumes. If empty the userCPG will be used.
+# (string value)
+#hpe3par_cpg_snap =
+
+# The time in hours to retain a snapshot.  You can't delete it before this
+# expires. (string value)
+#hpe3par_snapshot_retention =
+
+# The time in hours when a snapshot expires  and is deleted.  This must be
+# larger than expiration (string value)
+#hpe3par_snapshot_expiration =
+
+# Enable HTTP debugging to 3PAR (boolean value)
+#hpe3par_debug = false
+
+# List of target iSCSI addresses to use. (list value)
+#hpe3par_iscsi_ips =
+
+# Enable CHAP authentication for iSCSI connections. (boolean value)
+#hpe3par_iscsi_chap_enabled = false
+
+# HPE LeftHand WSAPI Server Url like https://<LeftHand ip>:8081/lhos (uri
+# value)
+# Deprecated group/name - [backend_defaults]/hplefthand_api_url
+#hpelefthand_api_url = <None>
+
+# HPE LeftHand Super user username (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_username
+#hpelefthand_username = <None>
+
+# HPE LeftHand Super user password (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_password
+#hpelefthand_password = <None>
+
+# HPE LeftHand cluster name (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_clustername
+#hpelefthand_clustername = <None>
+
+# Configure CHAP authentication for iSCSI connections (Default: Disabled)
+# (boolean value)
+# Deprecated group/name - [backend_defaults]/hplefthand_iscsi_chap_enabled
+#hpelefthand_iscsi_chap_enabled = false
+
+# Enable HTTP debugging to LeftHand (boolean value)
+# Deprecated group/name - [backend_defaults]/hplefthand_debug
+#hpelefthand_debug = false
+
+# Port number of SSH service. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#hpelefthand_ssh_port = 16022
+
+# The configuration file for the Cinder Huawei driver. (string value)
+#cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf.xml
+
+# The remote device hypermetro will use. (string value)
+#hypermetro_devices = <None>
+
+# The remote metro device san user. (string value)
+#metro_san_user = <None>
+
+# The remote metro device san password. (string value)
+#metro_san_password = <None>
+
+# The remote metro device domain name. (string value)
+#metro_domain_name = <None>
+
+# The remote metro device request url. (string value)
+#metro_san_address = <None>
+
+# The remote metro device pool names. (string value)
+#metro_storage_pools = <None>
+
+# Connection protocol should be FC. (Default is FC.) (string value)
+#flashsystem_connection_protocol = FC
+
+# Allows vdisk to multi host mapping. (Default is True) (boolean value)
+#flashsystem_multihostmap_enabled = true
+
+# DEPRECATED: This option no longer has any affect. It is deprecated and will
+# be removed in the next release. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#flashsystem_multipath_enabled = false
+
+# Default iSCSI Port ID of FlashSystem. (Default port is 0.) (integer value)
+#flashsystem_iscsi_portid = 0
+
+# Specifies the path of the GPFS directory where Block Storage volume and
+# snapshot files are stored. (string value)
+#gpfs_mount_point_base = <None>
+
+# Specifies the path of the Image service repository in GPFS.  Leave undefined
+# if not storing images in GPFS. (string value)
+#gpfs_images_dir = <None>
+
+# Specifies the type of image copy to be used.  Set this when the Image service
+# repository also uses GPFS so that image files can be transferred efficiently
+# from the Image service to the Block Storage service. There are two valid
+# values: "copy" specifies that a full copy of the image is made;
+# "copy_on_write" specifies that copy-on-write optimization strategy is used
+# and unmodified blocks of the image file are shared efficiently. (string
+# value)
+# Possible values:
+# copy - <No description provided>
+# copy_on_write - <No description provided>
+# <None> - <No description provided>
+#gpfs_images_share_mode = <None>
+
+# Specifies an upper limit on the number of indirections required to reach a
+# specific block due to snapshots or clones.  A lengthy chain of copy-on-write
+# snapshots or clones can have a negative impact on performance, but improves
+# space utilization.  0 indicates unlimited clone depth. (integer value)
+#gpfs_max_clone_depth = 0
+
+# Specifies that volumes are created as sparse files which initially consume no
+# space. If set to False, the volume is created as a fully allocated file, in
+# which case, creation may take a significantly longer time. (boolean value)
+#gpfs_sparse_volumes = true
+
+# Specifies the storage pool that volumes are assigned to. By default, the
+# system storage pool is used. (string value)
+#gpfs_storage_pool = system
+
+# Comma-separated list of IP address or hostnames of GPFS nodes. (list value)
+#gpfs_hosts =
+
+# Username for GPFS nodes. (string value)
+#gpfs_user_login = root
+
+# Password for GPFS node user. (string value)
+#gpfs_user_password =
+
+# Filename of private key to use for SSH authentication. (string value)
+#gpfs_private_key =
+
+# SSH port to use. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#gpfs_ssh_port = 22
+
+# File containing SSH host keys for the gpfs nodes with which driver needs to
+# communicate. Default=$state_path/ssh_known_hosts (string value)
+#gpfs_hosts_key_file = $state_path/ssh_known_hosts
+
+# Option to enable strict gpfs host key checking while connecting to gpfs
+# nodes. Default=False (boolean value)
+#gpfs_strict_host_key_policy = false
+
+# Mapping between IODevice address and unit address. (string value)
+#ds8k_devadd_unitadd_mapping =
+
+# Set the first two digits of SSID. (string value)
+#ds8k_ssid_prefix = FF
+
+# Reserve LSSs for consistency group. (string value)
+#lss_range_for_cg =
+
+# Set to zLinux if your OpenStack version is prior to Liberty and you're
+# connecting to zLinux systems. Otherwise set to auto. Valid values for this
+# parameter are: 'auto', 'AMDLinuxRHEL', 'AMDLinuxSuse', 'AppleOSX', 'Fujitsu',
+# 'Hp', 'HpTru64', 'HpVms', 'LinuxDT', 'LinuxRF', 'LinuxRHEL', 'LinuxSuse',
+# 'Novell', 'SGI', 'SVC', 'SanFsAIX', 'SanFsLinux', 'Sun', 'VMWare', 'Win2000',
+# 'Win2003', 'Win2008', 'Win2012', 'iLinux', 'nSeries', 'pLinux', 'pSeries',
+# 'pSeriesPowerswap', 'zLinux', 'iSeries'. (string value)
+#ds8k_host_type = auto
+
+# Proxy driver that connects to the IBM Storage Array (string value)
+#proxy = cinder.volume.drivers.ibm.ibm_storage.proxy.IBMStorageProxy
+
+# Connection type to the IBM Storage Array (string value)
+# Possible values:
+# fibre_channel - <No description provided>
+# iscsi - <No description provided>
+#connection_type = iscsi
+
+# CHAP authentication mode, effective only for iscsi (disabled|enabled) (string
+# value)
+# Possible values:
+# disabled - <No description provided>
+# enabled - <No description provided>
+#chap = disabled
+
+# List of Management IP addresses (separated by commas) (string value)
+#management_ips =
+
+# Comma separated list of storage system storage pools for volumes. (list
+# value)
+#storwize_svc_volpool_name = volpool
+
+# Storage system space-efficiency parameter for volumes (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#storwize_svc_vol_rsize = 2
+
+# Storage system threshold for volume capacity warnings (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#storwize_svc_vol_warning = 0
+
+# Storage system autoexpand parameter for volumes (True/False) (boolean value)
+#storwize_svc_vol_autoexpand = true
+
+# Storage system grain size parameter for volumes (8/32/64/128/256) (integer
+# value)
+#storwize_svc_vol_grainsize = 256
+
+# Storage system compression option for volumes (boolean value)
+#storwize_svc_vol_compression = false
+
+# Enable Easy Tier for volumes (boolean value)
+#storwize_svc_vol_easytier = true
+
+# The I/O group in which to allocate volumes. It can be a comma-separated list
+# in which case the driver will select an io_group based on least number of
+# volumes associated with the io_group. (string value)
+#storwize_svc_vol_iogrp = 0
+
+# Maximum number of seconds to wait for FlashCopy to be prepared. (integer
+# value)
+# Minimum value: 1
+# Maximum value: 600
+#storwize_svc_flashcopy_timeout = 120
+
+# DEPRECATED: This option no longer has any affect. It is deprecated and will
+# be removed in the next release. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#storwize_svc_multihostmap_enabled = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#storwize_svc_allow_tenant_qos = false
+
+# If operating in stretched cluster mode, specify the name of the pool in which
+# mirrored copies are stored.Example: "pool2" (string value)
+#storwize_svc_stretched_cluster_partner = <None>
+
+# Specifies secondary management IP or hostname to be used if san_ip is invalid
+# or becomes inaccessible. (string value)
+#storwize_san_secondary_ip = <None>
+
+# Specifies that the volume not be formatted during creation. (boolean value)
+#storwize_svc_vol_nofmtdisk = false
+
+# Specifies the Storwize FlashCopy copy rate to be used when creating a full
+# volume copy. The default is rate is 50, and the valid rates are 1-150.
+# (integer value)
+# Minimum value: 1
+# Maximum value: 150
+#storwize_svc_flashcopy_rate = 50
+
+# Specifies the name of the pool in which mirrored copy is stored. Example:
+# "pool2" (string value)
+#storwize_svc_mirror_pool = <None>
+
+# Specifies the name of the peer pool for hyperswap volume, the peer pool must
+# exist on the other site. (string value)
+#storwize_peer_pool = <None>
+
+# Specifies the site information for host. One WWPN or multi WWPNs used in the
+# host can be specified. For example:
+# storwize_preferred_host_site=site1:wwpn1,site2:wwpn2&wwpn3 or
+# storwize_preferred_host_site=site1:iqn1,site2:iqn2 (dict value)
+#storwize_preferred_host_site =
+
+# This defines an optional cycle period that applies to Global Mirror
+# relationships with a cycling mode of multi. A Global Mirror relationship
+# using the multi cycling_mode performs a complete cycle at most once each
+# period. The default is 300 seconds, and the valid seconds are 60-86400.
+# (integer value)
+# Minimum value: 60
+# Maximum value: 86400
+#cycle_period_seconds = 300
+
+# Connect with multipath (FC only; iSCSI multipath is controlled by Nova)
+# (boolean value)
+#storwize_svc_multipath_enabled = false
+
+# Configure CHAP authentication for iSCSI connections (Default: Enabled)
+# (boolean value)
+#storwize_svc_iscsi_chap_enabled = true
+
+# Name of the pool from which volumes are allocated (string value)
+#infinidat_pool_name = <None>
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#infinidat_storage_protocol = fc
+
+# List of names of network spaces to use for iSCSI connectivity (list value)
+#infinidat_iscsi_netspaces =
+
+# Specifies whether to turn on compression for newly created volumes. (boolean
+# value)
+#infinidat_use_compression = false
+
+# K2 driver will calculate max_oversubscription_ratio on setting this option as
+# True. (boolean value)
+#auto_calc_max_oversubscription_ratio = false
+
+# Whether or not our private network has unique FQDN on each initiator or not.
+# For example networks with QA systems usually have multiple servers/VMs with
+# the same FQDN.  When true this will create host entries on K2 using the FQDN,
+# when false it will use the reversed IQN/WWNN. (boolean value)
+#unique_fqdn_network = true
+
+# Disabling iSCSI discovery (sendtargets) for multipath connections on K2
+# driver. (boolean value)
+#disable_discovery = false
+
+# Pool or Vdisk name to use for volume creation. (string value)
+#lenovo_backend_name = A
+
+# linear (for VDisk) or virtual (for Pool). (string value)
+# Possible values:
+# linear - <No description provided>
+# virtual - <No description provided>
+#lenovo_backend_type = virtual
+
+# Lenovo api interface protocol. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#lenovo_api_protocol = https
+
+# Whether to verify Lenovo array SSL certificate. (boolean value)
+#lenovo_verify_certificate = false
+
+# Lenovo array SSL certificate path. (string value)
+#lenovo_verify_certificate_path = <None>
+
+# List of comma-separated target iSCSI IP addresses. (list value)
+#lenovo_iscsi_ips =
+
+# Name for the VG that will contain exported volumes (string value)
+#volume_group = cinder-volumes
+
+# If >0, create LVs with multiple mirrors. Note that this requires lvm_mirrors
+# + 2 PVs with available space (integer value)
+#lvm_mirrors = 0
+
+# Type of LVM volumes to deploy; (default, thin, or auto). Auto defaults to
+# thin if thin is supported. (string value)
+# Possible values:
+# default - <No description provided>
+# thin - <No description provided>
+# auto - <No description provided>
+#lvm_type = auto
+
+# LVM conf file to use for the LVM driver in Cinder; this setting is ignored if
+# the specified file does not exist (You can also specify 'None' to not use a
+# conf file even if one exists). (string value)
+#lvm_conf_file = /etc/cinder/lvm.conf
+
+# Suppress leaked file descriptor warnings in LVM commands. (boolean value)
+#lvm_suppress_fd_warnings = false
+
+# The storage family type used on the storage system; valid values are
+# ontap_cluster for using clustered Data ONTAP, or eseries for using E-Series.
+# (string value)
+# Possible values:
+# ontap_cluster - <No description provided>
+# eseries - <No description provided>
+#netapp_storage_family = ontap_cluster
+
+# The storage protocol to be used on the data path with the storage system.
+# (string value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+# nfs - <No description provided>
+#netapp_storage_protocol = <None>
+
+# The hostname (or IP address) for the storage system or proxy server. (string
+# value)
+#netapp_server_hostname = <None>
+
+# The TCP port to use for communication with the storage system or proxy
+# server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for
+# HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. (integer value)
+#netapp_server_port = <None>
+
+# The transport protocol used when communicating with the storage system or
+# proxy server. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#netapp_transport_type = http
+
+# Administrative user account name used to access the storage system or proxy
+# server. (string value)
+#netapp_login = <None>
+
+# Password for the administrative user account specified in the netapp_login
+# option. (string value)
+#netapp_password = <None>
+
+# This option specifies the virtual storage server (Vserver) name on the
+# storage cluster on which provisioning of block storage volumes should occur.
+# (string value)
+#netapp_vserver = <None>
+
+# The quantity to be multiplied by the requested volume size to ensure enough
+# space is available on the virtual storage server (Vserver) to fulfill the
+# volume creation request.  Note: this option is deprecated and will be removed
+# in favor of "reserved_percentage" in the Mitaka release. (floating point
+# value)
+#netapp_size_multiplier = 1.2
+
+# This option determines if storage space is reserved for LUN allocation. If
+# enabled, LUNs are thick provisioned. If space reservation is disabled,
+# storage space is allocated on demand. (string value)
+# Possible values:
+# enabled - <No description provided>
+# disabled - <No description provided>
+#netapp_lun_space_reservation = enabled
+
+# If the percentage of available space for an NFS share has dropped below the
+# value specified by this option, the NFS image cache will be cleaned. (integer
+# value)
+#thres_avl_size_perc_start = 20
+
+# When the percentage of available space on an NFS share has reached the
+# percentage specified by this option, the driver will stop clearing files from
+# the NFS image cache that have not been accessed in the last M minutes, where
+# M is the value of the expiry_thres_minutes configuration option. (integer
+# value)
+#thres_avl_size_perc_stop = 60
+
+# This option specifies the threshold for last access time for images in the
+# NFS image cache. When a cache cleaning cycle begins, images in the cache that
+# have not been accessed in the last M minutes, where M is the value of this
+# parameter, will be deleted from the cache to create free space on the NFS
+# share. (integer value)
+#expiry_thres_minutes = 720
+
+# This option is used to specify the path to the E-Series proxy application on
+# a proxy server. The value is combined with the value of the
+# netapp_transport_type, netapp_server_hostname, and netapp_server_port options
+# to create the URL used by the driver to connect to the proxy application.
+# (string value)
+#netapp_webservice_path = /devmgr/v2
+
+# This option is only utilized when the storage family is configured to
+# eseries. This option is used to restrict provisioning to the specified
+# controllers. Specify the value of this option to be a comma separated list of
+# controller hostnames or IP addresses to be used for provisioning. (string
+# value)
+#netapp_controller_ips = <None>
+
+# Password for the NetApp E-Series storage array. (string value)
+#netapp_sa_password = <None>
+
+# This option specifies whether the driver should allow operations that require
+# multiple attachments to a volume. An example would be live migration of
+# servers that have volumes attached. When enabled, this backend is limited to
+# 256 total volumes in order to guarantee volumes can be accessed by more than
+# one host. (boolean value)
+#netapp_enable_multiattach = false
+
+# This option specifies the path of the NetApp copy offload tool binary. Ensure
+# that the binary has execute permissions set which allow the effective user of
+# the cinder-volume process to execute the file. (string value)
+#netapp_copyoffload_tool_path = <None>
+
+# This option defines the type of operating system that will access a LUN
+# exported from Data ONTAP; it is assigned to the LUN at the time it is
+# created. (string value)
+#netapp_lun_ostype = <None>
+
+# This option defines the type of operating system for all initiators that can
+# access a LUN. This information is used when mapping LUNs to individual hosts
+# or groups of hosts. (string value)
+#netapp_host_type = <None>
+
+# This option is used to restrict provisioning to the specified pools. Specify
+# the value of this option to be a regular expression which will be applied to
+# the names of objects from the storage backend which represent pools in
+# Cinder. This option is only utilized when the storage protocol is configured
+# to use iSCSI or FC. (string value)
+# Deprecated group/name - [backend_defaults]/netapp_volume_list
+# Deprecated group/name - [backend_defaults]/netapp_storage_pools
+#netapp_pool_name_search_pattern = (.+)
+
+# Multi opt of dictionaries to represent the aggregate mapping between source
+# and destination back ends when using whole back end replication. For every
+# source aggregate associated with a cinder pool (NetApp FlexVol), you would
+# need to specify the destination aggregate on the replication target device. A
+# replication target device is configured with the configuration option
+# replication_device. Specify this option as many times as you have replication
+# devices. Each entry takes the standard dict config form:
+# netapp_replication_aggregate_map =
+# backend_id:<name_of_replication_device_section>,src_aggr_name1:dest_aggr_name1,src_aggr_name2:dest_aggr_name2,...
+# (dict value)
+#netapp_replication_aggregate_map = <None>
+
+# The maximum time in seconds to wait for existing SnapMirror transfers to
+# complete before aborting during a failover. (integer value)
+# Minimum value: 0
+#netapp_snapmirror_quiesce_timeout = 3600
+
+# A regular expression to limit the API tracing. This option is honored only if
+# enabling ``api`` tracing with the ``trace_flags`` option. By default, all
+# APIs will be traced. (string value)
+#netapp_api_trace_pattern = (.*)
+
+# DEPRECATED: IP address of NexentaEdge management REST API endpoint (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Rest address should now be set using the common param depending on
+# driver type, san_ip or nas_host
+#nexenta_rest_address =
+
+# IP address of Nexenta SA (string value)
+#nexenta_host =
+
+# DEPRECATED: HTTP(S) port to connect to Nexenta REST API server. If it is
+# equal zero, 8443 for HTTPS and 8080 for HTTP is used (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Rest address should now be set using the common param san_api_port.
+#nexenta_rest_port = 0
+
+# Use http or https for REST connection (default auto) (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+# auto - <No description provided>
+#nexenta_rest_protocol = auto
+
+# Use secure HTTP for REST connection (default True) (boolean value)
+#nexenta_use_https = true
+
+# Postponed write to backing store or not (boolean value)
+#nexenta_lu_writebackcache_disabled = false
+
+# DEPRECATED: User name to connect to Nexenta SA (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Common user parameters should be used depending on the driver type:
+# san_login or nas_login
+#nexenta_user = admin
+
+# DEPRECATED: Password to connect to Nexenta SA (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Common password parameters should be used depending on the driver
+# type: san_password or nas_password
+#nexenta_password = nexenta
+
+# Nexenta target portal groups (string value)
+#nexenta_iscsi_target_portal_groups =
+
+# Comma separated list of portals for NexentaStor5, informat of
+# IP1:port1,IP2:port2. Port is optional, default=3260. Example:
+# 10.10.10.1:3267,10.10.1.2 (string value)
+#nexenta_iscsi_target_portals =
+
+# Group of hosts which are allowed to access volumes (string value)
+#nexenta_iscsi_target_host_group = all
+
+# Nexenta target portal port (integer value)
+#nexenta_iscsi_target_portal_port = 3260
+
+# Amount of iSCSI LUNs per each target (integer value)
+#nexenta_luns_per_target = 100
+
+# SA Pool that holds all volumes (string value)
+#nexenta_volume = cinder
+
+# IQN prefix for iSCSI targets (string value)
+#nexenta_target_prefix = iqn.1986-03.com.sun:02:cinder
+
+# Prefix for iSCSI target groups on SA (string value)
+#nexenta_target_group_prefix = cinder
+
+# Prefix for iSCSI host groups on SA (string value)
+#nexenta_host_group_prefix = cinder
+
+# Volume group for NexentaStor5 iSCSI (string value)
+#nexenta_volume_group = iscsi
+
+# Compression value for new ZFS folders. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+# gzip - <No description provided>
+# gzip-1 - <No description provided>
+# gzip-2 - <No description provided>
+# gzip-3 - <No description provided>
+# gzip-4 - <No description provided>
+# gzip-5 - <No description provided>
+# gzip-6 - <No description provided>
+# gzip-7 - <No description provided>
+# gzip-8 - <No description provided>
+# gzip-9 - <No description provided>
+# lzjb - <No description provided>
+# zle - <No description provided>
+# lz4 - <No description provided>
+#nexenta_dataset_compression = on
+
+# Deduplication value for new ZFS folders. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+# sha256 - <No description provided>
+# verify - <No description provided>
+# sha256, verify - <No description provided>
+#nexenta_dataset_dedup = off
+
+# A folder where cinder created datasets will reside. (string value)
+#nexenta_folder =
+
+# Human-readable description for the folder. (string value)
+#nexenta_dataset_description =
+
+# Block size for datasets (integer value)
+#nexenta_blocksize = 4096
+
+# Block size for datasets (integer value)
+#nexenta_ns5_blocksize = 32
+
+# Enables or disables the creation of sparse datasets (boolean value)
+#nexenta_sparse = false
+
+# File with the list of available nfs shares (string value)
+#nexenta_shares_config = /etc/cinder/nfs_shares
+
+# Base directory that contains NFS share mount points (string value)
+#nexenta_mount_point_base = $state_path/mnt
+
+# Enables or disables the creation of volumes as sparsed files that take no
+# space. If disabled (False), volume is created as a regular file, which takes
+# a long time. (boolean value)
+#nexenta_sparsed_volumes = true
+
+# If set True cache NexentaStor appliance volroot option value. (boolean value)
+#nexenta_nms_cache_volroot = true
+
+# Enable stream compression, level 1..9. 1 - gives best speed; 9 - gives best
+# compression. (integer value)
+#nexenta_rrmgr_compression = 0
+
+# TCP Buffer size in KiloBytes. (integer value)
+#nexenta_rrmgr_tcp_buf_size = 4096
+
+# Number of TCP connections. (integer value)
+#nexenta_rrmgr_connections = 2
+
+# NexentaEdge logical path of directory to store symbolic links to NBDs (string
+# value)
+#nexenta_nbd_symlinks_dir = /dev/disk/by-path
+
+# User name to connect to NexentaEdge. (string value)
+#nexenta_rest_user = admin
+
+# Password to connect to NexentaEdge. (string value)
+#nexenta_rest_password = nexenta
+
+# NexentaEdge logical path of bucket for LUNs (string value)
+#nexenta_lun_container =
+
+# NexentaEdge iSCSI service name (string value)
+#nexenta_iscsi_service =
+
+# DEPRECATED: NexentaEdge iSCSI Gateway client address for non-VIP service
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: iSCSI target address should now be set using the common param
+# target_ip_address.
+#nexenta_client_address =
+
+# NexentaEdge iSCSI LUN object IOPS limit (integer value)
+#nexenta_iops_limit = 0
+
+# NexentaEdge iSCSI LUN object chunk size (integer value)
+#nexenta_chunksize = 32768
+
+# NexentaEdge iSCSI LUN object replication count. (integer value)
+#nexenta_replication_count = 3
+
+# Defines whether NexentaEdge iSCSI LUN object has encryption enabled. (boolean
+# value)
+#nexenta_encryption = false
+
+# File with the list of available NFS shares. (string value)
+#nfs_shares_config = /etc/cinder/nfs_shares
+
+# Create volumes as sparsed files which take no space. If set to False volume
+# is created as regular file. In such case volume creation takes a lot of time.
+# (boolean value)
+#nfs_sparsed_volumes = true
+
+# Create volumes as QCOW2 files rather than raw files. (boolean value)
+#nfs_qcow2_volumes = false
+
+# Base dir containing mount points for NFS shares. (string value)
+#nfs_mount_point_base = $state_path/mnt
+
+# Mount options passed to the NFS client. See section of the NFS man page for
+# details. (string value)
+#nfs_mount_options = <None>
+
+# The number of attempts to mount NFS shares before raising an error.  At least
+# one attempt will be made to mount an NFS share, regardless of the value
+# specified. (integer value)
+#nfs_mount_attempts = 3
+
+# Enable support for snapshots on the NFS driver. Platforms using libvirt
+# <1.2.7 will encounter issues with this feature. (boolean value)
+#nfs_snapshot_support = false
+
+# Nimble Controller pool name (string value)
+#nimble_pool_name = default
+
+# Nimble Subnet Label (string value)
+#nimble_subnet_label = *
+
+# Whether to verify Nimble SSL Certificate (boolean value)
+#nimble_verify_certificate = false
+
+# Path to Nimble Array SSL certificate (string value)
+#nimble_verify_cert_path = <None>
+
+# DPL pool uuid in which DPL volumes are stored. (string value)
+#dpl_pool =
+
+# DPL port number. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#dpl_port = 8357
+
+# REST API authorization token. (string value)
+#pure_api_token = <None>
+
+# Automatically determine an oversubscription ratio based on the current total
+# data reduction values. If used this calculated value will override the
+# max_over_subscription_ratio config option. (boolean value)
+#pure_automatic_max_oversubscription_ratio = true
+
+# Snapshot replication interval in seconds. (integer value)
+#pure_replica_interval_default = 3600
+
+# Retain all snapshots on target for this time (in seconds.) (integer value)
+#pure_replica_retention_short_term_default = 14400
+
+# Retain how many snapshots for each day. (integer value)
+#pure_replica_retention_long_term_per_day_default = 3
+
+# Retain snapshots per day on target for this time (in days.) (integer value)
+#pure_replica_retention_long_term_default = 7
+
+# When enabled, all Pure volumes, snapshots, and protection groups will be
+# eradicated at the time of deletion in Cinder. Data will NOT be recoverable
+# after a delete with this set to True! When disabled, volumes and snapshots
+# will go into pending eradication state and can be recovered. (boolean value)
+#pure_eradicate_on_delete = false
+
+# The URL to management QNAP Storage. Driver does not support IPv6 address in
+# URL. (uri value)
+#qnap_management_url = <None>
+
+# The pool name in the QNAP Storage (string value)
+#qnap_poolname = <None>
+
+# Communication protocol to access QNAP storage (string value)
+#qnap_storage_protocol = iscsi
+
+# Quobyte URL to the Quobyte volume using e.g. a DNS SRV record (preferred) or
+# a host list (alternatively) like quobyte://<DIR host1>, <DIR host2>/<volume
+# name> (string value)
+#quobyte_volume_url = <None>
+
+# Path to a Quobyte Client configuration file. (string value)
+#quobyte_client_cfg = <None>
+
+# Create volumes as sparse files which take no space. If set to False, volume
+# is created as regular file. (boolean value)
+#quobyte_sparsed_volumes = true
+
+# Create volumes as QCOW2 files rather than raw files. (boolean value)
+#quobyte_qcow2_volumes = true
+
+# Base dir containing the mount point for the Quobyte volume. (string value)
+#quobyte_mount_point_base = $state_path/mnt
+
+# Create a cache of volumes from merged snapshots to speed up creation of
+# multiple volumes from a single snapshot. (boolean value)
+#quobyte_volume_from_snapshot_cache = false
+
+# The name of ceph cluster (string value)
+#rbd_cluster_name = ceph
+
+# The RADOS pool where rbd volumes are stored (string value)
+#rbd_pool = rbd
+
+# The RADOS client name for accessing rbd volumes - only set when using cephx
+# authentication (string value)
+#rbd_user = <None>
+
+# Path to the ceph configuration file (string value)
+#rbd_ceph_conf =
+
+# Path to the ceph keyring file (string value)
+#rbd_keyring_conf =
+
+# Flatten volumes created from snapshots to remove dependency from volume to
+# snapshot (boolean value)
+#rbd_flatten_volume_from_snapshot = false
+
+# The libvirt uuid of the secret for the rbd_user volumes (string value)
+#rbd_secret_uuid = <None>
+
+# Maximum number of nested volume clones that are taken before a flatten
+# occurs. Set to 0 to disable cloning. (integer value)
+#rbd_max_clone_depth = 5
+
+# Volumes will be chunked into objects of this size (in megabytes). (integer
+# value)
+#rbd_store_chunk_size = 4
+
+# Timeout value (in seconds) used when connecting to ceph cluster. If value <
+# 0, no timeout is set and default librados value is used. (integer value)
+#rados_connect_timeout = -1
+
+# Number of retries if connection to ceph cluster failed. (integer value)
+#rados_connection_retries = 3
+
+# Interval value (in seconds) between connection retries to ceph cluster.
+# (integer value)
+#rados_connection_interval = 5
+
+# Timeout value (in seconds) used when connecting to ceph cluster to do a
+# demotion/promotion of volumes. If value < 0, no timeout is set and default
+# librados value is used. (integer value)
+#replication_connect_timeout = 5
+
+# Set to True for driver to report total capacity as a dynamic value (used +
+# current free) and to False to report a static value (quota max bytes if
+# defined and global size of cluster if not). (boolean value)
+#report_dynamic_total_capacity = true
+
+# Set to True if the pool is used exclusively by Cinder. On exclusive use
+# driver won't query images' provisioned size as they will match the value
+# calculated by the Cinder core code for allocated_capacity_gb. This reduces
+# the load on the Ceph cluster as well as on the volume service. (boolean
+# value)
+#rbd_exclusive_cinder_pool = false
+
+# IP address or Hostname of NAS system. (string value)
+#nas_host =
+
+# User name to connect to NAS system. (string value)
+#nas_login = admin
+
+# Password to connect to NAS system. (string value)
+#nas_password =
+
+# SSH port to use to connect to NAS system. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nas_ssh_port = 22
+
+# Filename of private key to use for SSH authentication. (string value)
+#nas_private_key =
+
+# Allow network-attached storage systems to operate in a secure environment
+# where root level access is not permitted. If set to False, access is as the
+# root user and insecure. If set to True, access is not as root. If set to
+# auto, a check is done to determine if this is a new installation: True is
+# used if so, otherwise False. Default is auto. (string value)
+#nas_secure_file_operations = auto
+
+# Set more secure file permissions on network-attached storage volume files to
+# restrict broad other/world access. If set to False, volumes are created with
+# open permissions. If set to True, volumes are created with permissions for
+# the cinder user and group (660). If set to auto, a check is done to determine
+# if this is a new installation: True is used if so, otherwise False. Default
+# is auto. (string value)
+#nas_secure_file_permissions = auto
+
+# Path to the share to use for storing Cinder volumes. For example:
+# "/srv/export1" for an NFS server export available at 10.0.5.10:/srv/export1 .
+# (string value)
+#nas_share_path =
+
+# Options used to mount the storage backend file system where Cinder volumes
+# are stored. (string value)
+#nas_mount_options = <None>
+
+# Provisioning type that will be used when creating volumes. (string value)
+# Possible values:
+# thin - <No description provided>
+# thick - <No description provided>
+#nas_volume_prov_type = thin
+
+# Pool or Vdisk name to use for volume creation. (string value)
+#hpmsa_backend_name = A
+
+# linear (for Vdisk) or virtual (for Pool). (string value)
+# Possible values:
+# linear - <No description provided>
+# virtual - <No description provided>
+#hpmsa_backend_type = virtual
+
+# HPMSA API interface protocol. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#hpmsa_api_protocol = https
+
+# Whether to verify HPMSA array SSL certificate. (boolean value)
+#hpmsa_verify_certificate = false
+
+# HPMSA array SSL certificate path. (string value)
+#hpmsa_verify_certificate_path = <None>
+
+# List of comma-separated target iSCSI IP addresses. (list value)
+#hpmsa_iscsi_ips =
+
+# Use thin provisioning for SAN volumes? (boolean value)
+#san_thin_provision = true
+
+# IP address of SAN controller (string value)
+#san_ip =
+
+# Username for SAN controller (string value)
+#san_login = admin
+
+# Password for SAN controller (string value)
+#san_password =
+
+# Filename of private key to use for SSH authentication (string value)
+#san_private_key =
+
+# Cluster name to use for creating volumes (string value)
+#san_clustername =
+
+# SSH port to use with SAN (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_ssh_port = 22
+
+# Port to use to access the SAN API (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_api_port = <None>
+
+# Execute commands locally instead of over SSH; use if the volume service is
+# running on the SAN device (boolean value)
+#san_is_local = false
+
+# SSH connection timeout in seconds (integer value)
+#ssh_conn_timeout = 30
+
+# Minimum ssh connections in the pool (integer value)
+#ssh_min_pool_conn = 1
+
+# Maximum ssh connections in the pool (integer value)
+#ssh_max_pool_conn = 5
+
+# IP address of sheep daemon. (string value)
+#sheepdog_store_address = 127.0.0.1
+
+# Port of sheep daemon. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sheepdog_store_port = 7000
+
+# Set 512 byte emulation on volume creation;  (boolean value)
+#sf_emulate_512 = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#sf_allow_tenant_qos = false
+
+# Create SolidFire accounts with this prefix. Any string can be used here, but
+# the string "hostname" is special and will create a prefix using the cinder
+# node hostname (previous default behavior).  The default is NO prefix. (string
+# value)
+#sf_account_prefix = <None>
+
+# Create SolidFire volumes with this prefix. Volume names are of the form
+# <sf_volume_prefix><cinder-volume-id>.  The default is to use a prefix of
+# 'UUID-'. (string value)
+#sf_volume_prefix = UUID-
+
+# Account name on the SolidFire Cluster to use as owner of template/cache
+# volumes (created if does not exist). (string value)
+#sf_template_account_name = openstack-vtemplate
+
+# DEPRECATED: This option is deprecated and will be removed in the next
+# OpenStack release.  Please use the general cinder image-caching feature
+# instead. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The Cinder caching feature should be used rather than this driver
+# specific implementation.
+#sf_allow_template_caching = false
+
+# Overrides default cluster SVIP with the one specified. This is required or
+# deployments that have implemented the use of VLANs for iSCSI networks in
+# their cloud. (string value)
+#sf_svip = <None>
+
+# SolidFire API port. Useful if the device api is behind a proxy on a different
+# port. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sf_api_port = 443
+
+# Utilize volume access groups on a per-tenant basis. (boolean value)
+#sf_enable_vag = false
+
+# Volume on Synology storage to be used for creating lun. (string value)
+#synology_pool_name =
+
+# Management port for Synology storage. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#synology_admin_port = 5000
+
+# Administrator of Synology storage. (string value)
+#synology_username = admin
+
+# Password of administrator for logging in Synology storage. (string value)
+#synology_password =
+
+# Do certificate validation or not if $driver_use_ssl is True (boolean value)
+#synology_ssl_verify = true
+
+# One time password of administrator for logging in Synology storage if OTP is
+# enabled. (string value)
+#synology_one_time_pass = <None>
+
+# Device id for skip one time password check for logging in Synology storage if
+# OTP is enabled. (string value)
+#synology_device_id = <None>
+
+# The hostname (or IP address) for the storage system (string value)
+#tintri_server_hostname = <None>
+
+# User name for the storage system (string value)
+#tintri_server_username = <None>
+
+# Password for the storage system (string value)
+#tintri_server_password = <None>
+
+# API version for the storage system (string value)
+#tintri_api_version = v310
+
+# Delete unused image snapshots older than mentioned days (integer value)
+#tintri_image_cache_expiry_days = 30
+
+# Path to image nfs shares file (string value)
+#tintri_image_shares_config = <None>
+
+# IP address for connecting to VMware vCenter server. (string value)
+#vmware_host_ip = <None>
+
+# Port number for connecting to VMware vCenter server. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#vmware_host_port = 443
+
+# Username for authenticating with VMware vCenter server. (string value)
+#vmware_host_username = <None>
+
+# Password for authenticating with VMware vCenter server. (string value)
+#vmware_host_password = <None>
+
+# Optional VIM service WSDL Location e.g http://<server>/vimService.wsdl.
+# Optional over-ride to default location for bug work-arounds. (string value)
+#vmware_wsdl_location = <None>
+
+# Number of times VMware vCenter server API must be retried upon connection
+# related issues. (integer value)
+#vmware_api_retry_count = 10
+
+# The interval (in seconds) for polling remote tasks invoked on VMware vCenter
+# server. (floating point value)
+#vmware_task_poll_interval = 2.0
+
+# Name of the vCenter inventory folder that will contain Cinder volumes. This
+# folder will be created under "OpenStack/<project_folder>", where
+# project_folder is of format "Project (<volume_project_id>)". (string value)
+#vmware_volume_folder = Volumes
+
+# Timeout in seconds for VMDK volume transfer between Cinder and Glance.
+# (integer value)
+#vmware_image_transfer_timeout_secs = 7200
+
+# Max number of objects to be retrieved per batch. Query results will be
+# obtained in batches from the server and not in one shot. Server may still
+# limit the count to something less than the configured value. (integer value)
+#vmware_max_objects_retrieval = 100
+
+# Optional string specifying the VMware vCenter server version. The driver
+# attempts to retrieve the version from VMware vCenter server. Set this
+# configuration only if you want to override the vCenter server version.
+# (string value)
+#vmware_host_version = <None>
+
+# Directory where virtual disks are stored during volume backup and restore.
+# (string value)
+#vmware_tmp_dir = /tmp
+
+# CA bundle file to use in verifying the vCenter server certificate. (string
+# value)
+#vmware_ca_file = <None>
+
+# If true, the vCenter server certificate is not verified. If false, then the
+# default CA truststore is used for verification. This option is ignored if
+# "vmware_ca_file" is set. (boolean value)
+#vmware_insecure = false
+
+# Name of a vCenter compute cluster where volumes should be created. (multi
+# valued)
+#vmware_cluster_name =
+
+# Maximum number of connections in http connection pool. (integer value)
+#vmware_connection_pool_size = 10
+
+# Default adapter type to be used for attaching volumes. (string value)
+# Possible values:
+# lsiLogic - <No description provided>
+# busLogic - <No description provided>
+# lsiLogicsas - <No description provided>
+# paraVirtual - <No description provided>
+# ide - <No description provided>
+#vmware_adapter_type = lsiLogic
+
+# Volume snapshot format in vCenter server. (string value)
+# Possible values:
+# template - <No description provided>
+# COW - <No description provided>
+#vmware_snapshot_format = template
+
+# If true, the backend volume in vCenter server is created lazily when the
+# volume is created without any source. The backend volume is created when the
+# volume is attached, uploaded to image service or during backup. (boolean
+# value)
+#vmware_lazy_create = true
+
+# Regular expression pattern to match the name of datastores where backend
+# volumes are created. (string value)
+#vmware_datastore_regex = <None>
+
+# File with the list of available vzstorage shares. (string value)
+#vzstorage_shares_config = /etc/cinder/vzstorage_shares
+
+# Create volumes as sparsed files which take no space rather than regular files
+# when using raw format, in which case volume creation takes lot of time.
+# (boolean value)
+#vzstorage_sparsed_volumes = true
+
+# Percent of ACTUAL usage of the underlying volume before no new volumes can be
+# allocated to the volume destination. (floating point value)
+#vzstorage_used_ratio = 0.95
+
+# Base dir containing mount points for vzstorage shares. (string value)
+#vzstorage_mount_point_base = $state_path/mnt
+
+# Mount options passed to the vzstorage client. See section of the pstorage-
+# mount man page for details. (list value)
+#vzstorage_mount_options = <None>
+
+# Default format that will be used when creating volumes if no volume format is
+# specified. (string value)
+#vzstorage_default_volume_format = raw
+
+# Path to store VHD backed volumes (string value)
+#windows_iscsi_lun_path = C:\iSCSIVirtualDisks
+
+# File with the list of available smbfs shares. (string value)
+#smbfs_shares_config = C:\OpenStack\smbfs_shares.txt
+
+# Default format that will be used when creating volumes if no volume format is
+# specified. (string value)
+# Possible values:
+# vhd - <No description provided>
+# vhdx - <No description provided>
+#smbfs_default_volume_format = vhd
+
+# Base dir containing mount points for smbfs shares. (string value)
+#smbfs_mount_point_base = C:\OpenStack\_mnt
+
+# Mappings between share locations and pool names. If not specified, the share
+# names will be used as pool names. Example:
+# //addr/share:pool_name,//addr/share2:pool_name2 (dict value)
+#smbfs_pool_mappings =
+
+# VPSA - Use ISER instead of iSCSI (boolean value)
+#zadara_use_iser = true
+
+# VPSA - Management Host name or IP address (string value)
+#zadara_vpsa_host = <None>
+
+# VPSA - Port number (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#zadara_vpsa_port = <None>
+
+# VPSA - Use SSL connection (boolean value)
+#zadara_vpsa_use_ssl = false
+
+# If set to True the http client will validate the SSL certificate of the VPSA
+# endpoint. (boolean value)
+#zadara_ssl_cert_verify = true
+
+# VPSA - Username (string value)
+#zadara_user = <None>
+
+# VPSA - Password (string value)
+#zadara_password = <None>
+
+# VPSA - Storage Pool assigned for volumes (string value)
+#zadara_vpsa_poolname = <None>
+
+# VPSA - Default encryption policy for volumes (boolean value)
+#zadara_vol_encrypt = false
+
+# VPSA - Default template for VPSA volume names (string value)
+#zadara_vol_name_template = OS_%s
+
+# VPSA - Attach snapshot policy for volumes (boolean value)
+#zadara_default_snap_policy = false
+
+# Storage pool name. (string value)
+#zfssa_pool = <None>
+
+# Project name. (string value)
+#zfssa_project = <None>
+
+# Block size. (string value)
+# Possible values:
+# 512 - <No description provided>
+# 1k - <No description provided>
+# 2k - <No description provided>
+# 4k - <No description provided>
+# 8k - <No description provided>
+# 16k - <No description provided>
+# 32k - <No description provided>
+# 64k - <No description provided>
+# 128k - <No description provided>
+#zfssa_lun_volblocksize = 8k
+
+# Flag to enable sparse (thin-provisioned): True, False. (boolean value)
+#zfssa_lun_sparse = false
+
+# Data compression. (string value)
+# Possible values:
+# off - <No description provided>
+# lzjb - <No description provided>
+# gzip-2 - <No description provided>
+# gzip - <No description provided>
+# gzip-9 - <No description provided>
+#zfssa_lun_compression = off
+
+# Synchronous write bias. (string value)
+# Possible values:
+# latency - <No description provided>
+# throughput - <No description provided>
+#zfssa_lun_logbias = latency
+
+# iSCSI initiator group. (string value)
+#zfssa_initiator_group =
+
+# iSCSI initiator IQNs. (comma separated) (string value)
+#zfssa_initiator =
+
+# iSCSI initiator CHAP user (name). (string value)
+#zfssa_initiator_user =
+
+# Secret of the iSCSI initiator CHAP user. (string value)
+#zfssa_initiator_password =
+
+# iSCSI initiators configuration. (string value)
+#zfssa_initiator_config =
+
+# iSCSI target group name. (string value)
+#zfssa_target_group = tgt-grp
+
+# iSCSI target CHAP user (name). (string value)
+#zfssa_target_user =
+
+# Secret of the iSCSI target CHAP user. (string value)
+#zfssa_target_password =
+
+# iSCSI target portal (Data-IP:Port, w.x.y.z:3260). (string value)
+#zfssa_target_portal = <None>
+
+# Network interfaces of iSCSI targets. (comma separated) (string value)
+#zfssa_target_interfaces = <None>
+
+# REST connection timeout. (seconds) (integer value)
+#zfssa_rest_timeout = <None>
+
+# IP address used for replication data. (maybe the same as data ip) (string
+# value)
+#zfssa_replication_ip =
+
+# Flag to enable local caching: True, False. (boolean value)
+#zfssa_enable_local_cache = true
+
+# Name of ZFSSA project where cache volumes are stored. (string value)
+#zfssa_cache_project = os-cinder-cache
+
+# Driver policy for volume manage. (string value)
+# Possible values:
+# loose - <No description provided>
+# strict - <No description provided>
+#zfssa_manage_policy = loose
+
+# Data path IP address (string value)
+#zfssa_data_ip = <None>
+
+# HTTPS port number (string value)
+#zfssa_https_port = 443
+
+# Options to be passed while mounting share over nfs (string value)
+#zfssa_nfs_mount_options =
+
+# Storage pool name. (string value)
+#zfssa_nfs_pool =
+
+# Project name. (string value)
+#zfssa_nfs_project = NFSProject
+
+# Share name. (string value)
+#zfssa_nfs_share = nfs_share
+
+# Data compression. (string value)
+# Possible values:
+# off - <No description provided>
+# lzjb - <No description provided>
+# gzip-2 - <No description provided>
+# gzip - <No description provided>
+# gzip-9 - <No description provided>
+#zfssa_nfs_share_compression = off
+
+# Synchronous write bias-latency, throughput. (string value)
+# Possible values:
+# latency - <No description provided>
+# throughput - <No description provided>
+#zfssa_nfs_share_logbias = latency
+
+# Name of directory inside zfssa_nfs_share where cache volumes are stored.
+# (string value)
+#zfssa_cache_directory = os-cinder-cache
+
+# Driver to use for volume creation (string value)
+#volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+
+# User defined capabilities, a JSON formatted string specifying key/value
+# pairs. The key/value pairs can be used by the CapabilitiesFilter to select
+# between backends when requests specify volume types. For example, specifying
+# a service level or the geographical location of a backend, then creating a
+# volume type to allow the user to select by these different properties.
+# (string value)
+#extra_capabilities = {}
+
+# Suppress requests library SSL certificate warnings. (boolean value)
+#suppress_requests_ssl_warnings = false
+
+# Size of the native threads pool for the backend.  Increase for backends that
+# heavily rely on this, like the RBD driver. (integer value)
+# Minimum value: 20
+#backend_native_threads_pool_size = 20
+
+
+[barbican]
+#
+# From castellan.config
+#
+
+# Use this endpoint to connect to Barbican, for example:
+# "http://localhost:9311/" (string value)
+#barbican_endpoint = <None>
+
+# Version of the Barbican API, for example: "v1" (string value)
+#barbican_api_version = <None>
+
+# Use this endpoint to connect to Keystone (string value)
+# Deprecated group/name - [key_manager]/auth_url
+#auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://192.168.10.35:35357/v3
+
+# Number of seconds to wait before retrying poll for key creation completion
+# (integer value)
+#retry_delay = 1
+
+# Number of times to retry poll for key creation completion (integer value)
+#number_of_retries = 60
+
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
+#verify_ssl = true
+
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
+# admin (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+#barbican_endpoint_type = public
+barbican_endpoint_type = internal
+
+
+[brcd_fabric_example]
+
+#
+# From cinder
+#
+
+# South bound connector for the fabric. (string value)
+# Possible values:
+# SSH - <No description provided>
+# HTTP - <No description provided>
+# HTTPS - <No description provided>
+#fc_southbound_protocol = HTTP
+
+# Management IP of fabric. (string value)
+#fc_fabric_address =
+
+# Fabric user ID. (string value)
+#fc_fabric_user =
+
+# Password for user. (string value)
+#fc_fabric_password =
+
+# Connecting port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#fc_fabric_port = 22
+
+# Local SSH certificate Path. (string value)
+#fc_fabric_ssh_cert_path =
+
+# Overridden zoning policy. (string value)
+#zoning_policy = initiator-target
+
+# Overridden zoning activation state. (boolean value)
+#zone_activate = true
+
+# Overridden zone name prefix. (string value)
+#zone_name_prefix = openstack
+
+# Virtual Fabric ID. (string value)
+#fc_virtual_fabric_id = <None>
+
+
+[cisco_fabric_example]
+
+#
+# From cinder
+#
+
+# Management IP of fabric (string value)
+#cisco_fc_fabric_address =
+
+# Fabric user ID (string value)
+#cisco_fc_fabric_user =
+
+# Password for user (string value)
+#cisco_fc_fabric_password =
+
+# Connecting port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#cisco_fc_fabric_port = 22
+
+# overridden zoning policy (string value)
+#cisco_zoning_policy = initiator-target
+
+# overridden zoning activation state (boolean value)
+#cisco_zone_activate = true
+
+# overridden zone name prefix (string value)
+#cisco_zone_name_prefix = <None>
+
+# VSAN of the Fabric (string value)
+#cisco_zoning_vsan = <None>
+
+
+[coordination]
+
+#
+# From cinder
+#
+
+# The backend URL to use for distributed coordination. (string value)
+#backend_url = file://$state_path
+
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
+
 
 [database]
-connection = sqlite:////var/lib/cinder/cinder.sqlite
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://cinder:opnfv_secret@192.168.10.23/cinder?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster (NDB).
+# (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer than this
+# number of seconds will be replaced with a new one the next time they are
+# checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to set the minimum pool size is not supported by
+# sqlalchemy.
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+# Optional URL parameters to append onto the connection URL at connect time;
+# specify as param1=value1&param2=value2&... (string value)
+#connection_parameters =
+
+
+
+[fc-zone-manager]
+
+#
+# From cinder
+#
+
+# South bound connector for zoning operation (string value)
+#brcd_sb_connector = HTTP
+
+# Southbound connector for zoning operation (string value)
+#cisco_sb_connector = cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI
+
+# FC Zone Driver responsible for zone management (string value)
+#zone_driver = cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver
+
+# Zoning policy configured by user; valid values include "initiator-target" or
+# "initiator" (string value)
+#zoning_policy = initiator-target
+
+# Comma separated list of Fibre Channel fabric names. This list of names is
+# used to retrieve other SAN credentials for connecting to each SAN fabric
+# (string value)
+#fc_fabric_names = <None>
+
+# FC SAN Lookup Service (string value)
+#fc_san_lookup_service = cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService
+
+# Set this to True when you want to allow an unsupported zone manager driver to
+# start.  Drivers that haven't maintained a working CI system and testing are
+# marked as unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+
+[healthcheck]
+
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#path = /healthcheck
+
+# Show more detailed information as part of the response (boolean value)
+#detailed = false
+
+# Additional backends that can perform health checks and report that
+# information back as part of a request. (list value)
+#backends =
+
+# Check the presence of a file to determine if an application is running on a
+# port. Used by DisableByFileHealthcheck plugin. (string value)
+#disable_by_file_path = <None>
+
+# Check the presence of a file based on a port to determine if an application
+# is running on a port. Expects a "port:path" list of strings. Used by
+# DisableByFilesPortsHealthcheck plugin. (list value)
+#disable_by_file_paths =
+
+
+[key_manager]
+
+#
+# From castellan.config
+#
+
+# Specify the key manager implementation. Options are "barbican" and "vault".
+# Default is  "barbican". Will support the  values earlier set using
+# [key_manager]/api_class for some time. (string value)
+# Deprecated group/name - [key_manager]/api_class
+#backend = barbican
+backend = barbican
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = cinder
+
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+# Deprecated group/name - [keystone_authtoken]/auth_uri
+#www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
+#auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = cinder
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[nova]
+
+#
+# From cinder
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#interface = public
+
+# The authentication URL for the nova connection when using the current users
+# token (string value)
+#token_auth_url = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Collect per-API call timing information. (boolean value)
+#collect_timing = false
+
+# Log requests to multiple loggers. (boolean value)
+#split_loggers = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+
+[oslo_concurrency]
+
+
+[oslo_messaging_amqp]
+
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a generated
+# UUID (string value)
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+#trace = false
+
+# Attempt to connect via SSL. If no other ssl-related parameters are given, it
+# will use the system's CA-bundle to verify the server's certificate. (boolean
+# value)
+#ssl = false
+
+# CA certificate PEM file used to verify the server's certificate (string
+# value)
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication (string
+# value)
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# (string value)
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+#ssl_key_password = <None>
+
+# By default SSL checks that the name in the server's certificate matches the
+# hostname in the transport_url. In some configurations it may be preferable to
+# use the virtual hostname instead, for example if the server uses the Server
+# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
+# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
+# virtual host name instead of the DNS name. (boolean value)
+#ssl_verify_vhost = false
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string value)
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+#sasl_config_name =
+
+# SASL realm to use if no realm present in username (string value)
+#sasl_default_realm =
+
+# DEPRECATED: User name for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# username.
+#username =
+
+# DEPRECATED: Password for message broker authentication (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# password.
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
+# Minimum value: 1
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after each
+# unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval + connection_retry_backoff
+# (integer value)
+# Minimum value: 1
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
+# recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which failed due to
+# a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used when caller
+# does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link after
+# expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy'   - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic'  - use legacy addresses if the message bus does not support routing
+# otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# Enable virtual host support for those message buses that do not natively
+# support virtual hosting (such as qpidd). When set to true the virtual host
+# name will be added to all message bus addresses, effectively creating a
+# private 'subnet' per virtual host. Set to False if the message bus supports
+# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
+# as the name of the virtual host. (boolean value)
+#pseudo_vhost = true
+
+# address prefix used when sending to a specific server (string value)
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used by the
+# message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular RPC/Notification
+# server. Used by the message bus to identify messages sent to a single
+# destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers. Used by
+# the message bus to identify messages that should be delivered in a round-
+# robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify'   - Send Notifications pre-settled
+#  (multi valued)
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_kafka]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Default Kafka broker Host (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_host = localhost
+
+# DEPRECATED: Default Kafka broker Port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#kafka_default_port = 9092
+
+# Max fetch bytes of Kafka consumer (integer value)
+#kafka_max_fetch_bytes = 1048576
+
+# Default timeout(s) for Kafka consumers (floating point value)
+#kafka_consumer_timeout = 1.0
+
+# DEPRECATED: Pool Size for Kafka Consumers (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Driver no longer uses connection pool.
+#pool_size = 10
+
+# DEPRECATED: The pool size limit for connections expiration policy (integer
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Driver no longer uses connection pool.
+#conn_pool_min_size = 2
+
+# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Driver no longer uses connection pool.
+#conn_pool_ttl = 1200
+
+# Group id for Kafka consumer. Consumers in one group will coordinate message
+# consumption (string value)
+#consumer_group = oslo_messaging_consumer
+
+# Upper bound on the delay for KafkaProducer batching in seconds (floating
+# point value)
+#producer_batch_timeout = 0.0
+
+# Size of batch for the producer async send (integer value)
+#producer_batch_size = 16384
+
+# Enable asynchronous consumer commits (boolean value)
+#enable_auto_commit = false
+
+# The maximum number of records returned in a poll call (integer value)
+#max_poll_records = 500
+
+# Protocol used to communicate with brokers (string value)
+# Possible values:
+# PLAINTEXT - <No description provided>
+# SASL_PLAINTEXT - <No description provided>
+# SSL - <No description provided>
+# SASL_SSL - <No description provided>
+#security_protocol = PLAINTEXT
+
+# Mechanism when security protocol is SASL (string value)
+#sasl_mechanism = PLAIN
+
+# CA certificate PEM file used to verify the server certificate (string value)
+#ssl_cafile =
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Connect over SSL. (boolean value)
+# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
+#ssl = false
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
+
+
+[oslo_policy]
+
+
+[oslo_reports]
+
+
+[oslo_versionedobjects]
+
+#
+# From oslo.versionedobjects
+#
+
+# Make exception message format errors fatal (boolean value)
+#fatal_exception_format_errors = false
+
+
+[profiler]
+
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+
+
+[sample_remote_file_source]
+# Example of using a remote_file source
+#
+# remote_file: A backend driver for remote files served through http[s].
+#
+# Required options:
+#   - uri: URI containing the file location.
+#
+# Non-required options:
+#   - ca_path: The path to a CA_BUNDLE file or directory with
+#              certificates of trusted CAs.
+#
+#   - client_cert: Client side certificate, as a single file path
+#                  containing either the certificate only or the
+#                  private key and the certificate.
+#
+#   - client_key: Client side private key, in case client_cert is
+#                 specified but does not includes the private key.
+
+#
+# From oslo.config
+#
+
+# The name of the driver that can load this configuration source. (string
+# value)
+#driver = remote_file
+
+# Required option with the URI of the extra configuration file's location. (uri
+# value)
+#uri = https://example.com/my-configuration.ini
+
+# The path to a CA_BUNDLE file or directory with certificates of trusted CAs.
+# (string value)
+#ca_path = /etc/ca-certificates
+
+# Client side certificate, as a single file path containing either the
+# certificate only or the private key and the certificate. (string value)
+#client_cert = /etc/ca-certificates/service-client-keystore
+
+# Client side private key, in case client_cert is specified but does not
+# includes the private key. (string value)
+#client_key = <None>
+
+
+[service_user]
+
+#
+# From cinder
+#
+
+#
+# When True, if sending a user token to an REST API, also send a service token.
+#  (boolean value)
+#send_service_user_token = false
+send_service_user_token = True
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:5000
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = cinder
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Collect per-API call timing information. (boolean value)
+#collect_timing = false
+
+# Log requests to multiple loggers. (boolean value)
+#split_loggers = false
+
+
+[ssl]
+
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
+#ca_file = <None>
+
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>
+
+
+[vault]
+
+#
+# From castellan.config
+#
+
+# root token for vault (string value)
+#root_token_id = <None>
+
+# Use this endpoint to connect to Vault, for example: "http://127.0.0.1:8200"
+# (string value)
+#vault_url = http://127.0.0.1:8200
+
+# Absolute path to ca cert file (string value)
+#ssl_ca_crt_file = <None>
+
+# SSL Enabled/Disabled (boolean value)
+#use_ssl = false

2020-01-15 02:38:43,541 [salt.state       :1951][INFO    ][28810] Completed state [/etc/cinder/cinder.conf] at time 02:38:43.541644 duration_in_ms=556.181
2020-01-15 02:38:43,543 [salt.state       :1780][INFO    ][28810] Running state [/etc/cinder/api-paste.ini] at time 02:38:43.543237
2020-01-15 02:38:43,543 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/cinder/api-paste.ini]
2020-01-15 02:38:43,574 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/files/stein/api-paste.ini.controller.Debian'
2020-01-15 02:38:43,683 [salt.state       :300 ][INFO    ][28810] {'mode': '0640'}
2020-01-15 02:38:43,683 [salt.state       :1951][INFO    ][28810] Completed state [/etc/cinder/api-paste.ini] at time 02:38:43.683725 duration_in_ms=140.488
2020-01-15 02:38:43,686 [salt.state       :1780][INFO    ][28810] Running state [cinder-manage db sync; sleep 5;] at time 02:38:43.686276
2020-01-15 02:38:43,686 [salt.state       :1813][INFO    ][28810] Executing state cmd.run for [cinder-manage db sync; sleep 5;]
2020-01-15 02:38:43,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command 'cinder-manage db sync; sleep 5;' as user 'cinder' in directory '/var/lib/cinder'
2020-01-15 02:38:55,154 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115023855139725
2020-01-15 02:38:55,188 [salt.minion      :1432][INFO    ][29977] Starting a new job with PID 29977
2020-01-15 02:38:55,241 [salt.minion      :1711][INFO    ][29977] Returning information for job: 20200115023855139725
2020-01-15 02:38:55,539 [salt.state       :300 ][INFO    ][28810] {'pid': 29918, 'retcode': 0, 'stderr': '', 'stdout': '2020-01-15 02:38:46.387 29920 INFO migrate.versioning.api [-] 96 -> 97... \x1b[00m\n2020-01-15 02:38:48.027 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.028 29920 INFO migrate.versioning.api [-] 97 -> 98... \x1b[00m\n2020-01-15 02:38:48.100 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.100 29920 INFO migrate.versioning.api [-] 98 -> 99... \x1b[00m\n2020-01-15 02:38:48.184 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.184 29920 INFO migrate.versioning.api [-] 99 -> 100... \x1b[00m\n2020-01-15 02:38:48.198 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding attachment_specs_attachment_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.212 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding cgsnapshots_consistencygroup_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.224 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding group_snapshots_group_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.244 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding group_type_specs_group_type_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.256 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding group_volume_type_mapping_group_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.268 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding group_volume_type_mapping_volume_type_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.281 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding quality_of_service_specs_specs_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.293 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding reservations_allocated_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.306 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding reservations_usage_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.318 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshot_metadata_snapshot_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.331 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshots_cgsnapshot_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.343 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshots_group_snapshot_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.356 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding snapshots_volume_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.369 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding transfers_volume_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.381 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_admin_metadata_volume_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.395 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_attachment_volume_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.410 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_glance_metadata_snapshot_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.424 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_glance_metadata_volume_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.438 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_metadata_volume_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.452 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_type_extra_specs_volume_type_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.467 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volume_types_qos_specs_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.484 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volumes_consistencygroup_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.500 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding volumes_group_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.513 29920 INFO 100_add_foreign_key_indexes [-] Skipped adding workers_service_id_idx because an equivalent index already exists.\x1b[00m\n2020-01-15 02:38:48.533 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.534 29920 INFO migrate.versioning.api [-] 100 -> 101... \x1b[00m\n2020-01-15 02:38:48.585 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.585 29920 INFO migrate.versioning.api [-] 101 -> 102... \x1b[00m\n2020-01-15 02:38:48.652 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.653 29920 INFO migrate.versioning.api [-] 102 -> 103... \x1b[00m\n2020-01-15 02:38:48.730 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.731 29920 INFO migrate.versioning.api [-] 103 -> 104... \x1b[00m\n2020-01-15 02:38:48.785 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.785 29920 INFO migrate.versioning.api [-] 104 -> 105... \x1b[00m\n2020-01-15 02:38:48.854 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.855 29920 INFO migrate.versioning.api [-] 105 -> 106... \x1b[00m\n2020-01-15 02:38:48.874 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.874 29920 INFO migrate.versioning.api [-] 106 -> 107... \x1b[00m\n2020-01-15 02:38:48.892 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.892 29920 INFO migrate.versioning.api [-] 107 -> 108... \x1b[00m\n2020-01-15 02:38:48.910 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.911 29920 INFO migrate.versioning.api [-] 108 -> 109... \x1b[00m\n2020-01-15 02:38:48.928 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.929 29920 INFO migrate.versioning.api [-] 109 -> 110... \x1b[00m\n2020-01-15 02:38:48.947 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:48.947 29920 INFO migrate.versioning.api [-] 110 -> 111... \x1b[00m\n2020-01-15 02:38:49.015 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.015 29920 INFO migrate.versioning.api [-] 111 -> 112... \x1b[00m\n2020-01-15 02:38:49.100 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.101 29920 INFO migrate.versioning.api [-] 112 -> 113... \x1b[00m\n2020-01-15 02:38:49.187 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.188 29920 INFO migrate.versioning.api [-] 113 -> 114... \x1b[00m\n2020-01-15 02:38:49.353 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.353 29920 INFO migrate.versioning.api [-] 114 -> 115... \x1b[00m\n2020-01-15 02:38:49.458 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.458 29920 INFO migrate.versioning.api [-] 115 -> 116... \x1b[00m\n2020-01-15 02:38:49.562 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.563 29920 INFO migrate.versioning.api [-] 116 -> 117... \x1b[00m\n2020-01-15 02:38:49.627 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.627 29920 INFO migrate.versioning.api [-] 117 -> 118... \x1b[00m\n2020-01-15 02:38:49.647 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.648 29920 INFO migrate.versioning.api [-] 118 -> 119... \x1b[00m\n2020-01-15 02:38:49.669 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.669 29920 INFO migrate.versioning.api [-] 119 -> 120... \x1b[00m\n2020-01-15 02:38:49.691 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.691 29920 INFO migrate.versioning.api [-] 120 -> 121... \x1b[00m\n2020-01-15 02:38:49.713 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.713 29920 INFO migrate.versioning.api [-] 121 -> 122... \x1b[00m\n2020-01-15 02:38:49.733 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.734 29920 INFO migrate.versioning.api [-] 122 -> 123... \x1b[00m\n2020-01-15 02:38:49.857 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.857 29920 INFO migrate.versioning.api [-] 123 -> 124... \x1b[00m\n2020-01-15 02:38:49.882 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.882 29920 INFO migrate.versioning.api [-] 124 -> 125... \x1b[00m\n2020-01-15 02:38:49.904 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.904 29920 INFO migrate.versioning.api [-] 125 -> 126... \x1b[00m\n2020-01-15 02:38:49.926 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.926 29920 INFO migrate.versioning.api [-] 126 -> 127... \x1b[00m\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters [-] DBAPIError exception wrapped from (pymysql.err.InternalError) (1071, \'Specified key was too long; max key length is 767 bytes\') [SQL: \'\\nALTER TABLE quota_usages CHANGE COLUMN resource resource VARCHAR(300)\'] (Background on this error at: http://sqlalche.me/e/2j85): pymysql.err.InternalError: (1071, \'Specified key was too long; max key length is 767 bytes\')\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters Traceback (most recent call last):\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/sqlalchemy/engine/base.py", line 1193, in _execute_context\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     context)\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/sqlalchemy/engine/default.py", line 509, in do_execute\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     cursor.execute(statement, parameters)\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/cursors.py", line 165, in execute\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     result = self._query(query)\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/cursors.py", line 321, in _query\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     conn.query(q)\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/connections.py", line 860, in query\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     self._affected_rows = self._read_query_result(unbuffered=unbuffered)\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/connections.py", line 1061, in _read_query_result\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     result.read()\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/connections.py", line 1349, in read\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     first_packet = self.connection._read_packet()\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/connections.py", line 1018, in _read_packet\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     packet.check_error()\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/connections.py", line 384, in check_error\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     err.raise_mysql_exception(self._data)\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters   File "/usr/lib/python3/dist-packages/pymysql/err.py", line 107, in raise_mysql_exception\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters     raise errorclass(errno, errval)\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters pymysql.err.InternalError: (1071, \'Specified key was too long; max key length is 767 bytes\')\n2020-01-15 02:38:49.952 29920 ERROR oslo_db.sqlalchemy.exc_filters \x1b[00m\n2020-01-15 02:38:49.981 29920 INFO migrate.versioning.api [-] done\x1b[00m\n2020-01-15 02:38:49.982 29920 INFO migrate.versioning.api [-] 127 -> 128... \x1b[00m\n2020-01-15 02:38:50.169 29920 INFO migrate.versioning.api [-] done\x1b[00m'}
2020-01-15 02:38:55,549 [salt.state       :1951][INFO    ][28810] Completed state [cinder-manage db sync; sleep 5;] at time 02:38:55.548897 duration_in_ms=11862.619
2020-01-15 02:38:55,552 [salt.state       :1780][INFO    ][28810] Running state [/etc/default/cinder-scheduler] at time 02:38:55.552151
2020-01-15 02:38:55,553 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/default/cinder-scheduler]
2020-01-15 02:38:55,592 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/files/default'
2020-01-15 02:38:55,627 [salt.state       :300 ][INFO    ][28810] File changed:
New file
2020-01-15 02:38:55,628 [salt.state       :1951][INFO    ][28810] Completed state [/etc/default/cinder-scheduler] at time 02:38:55.628357 duration_in_ms=76.143
2020-01-15 02:38:55,630 [salt.state       :1780][INFO    ][28810] Running state [/etc/cinder/policy.json] at time 02:38:55.629988
2020-01-15 02:38:55,630 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/cinder/policy.json]
2020-01-15 02:38:55,631 [salt.loaded.int.states.file:2298][WARNING ][28810] State for file: /etc/cinder/policy.json - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 02:38:55,635 [salt.state       :300 ][INFO    ][28810] {'new': 'file /etc/cinder/policy.json created', 'group': 'cinder', 'mode': '0640'}
2020-01-15 02:38:55,636 [salt.state       :1951][INFO    ][28810] Completed state [/etc/cinder/policy.json] at time 02:38:55.636622 duration_in_ms=6.634
2020-01-15 02:38:55,638 [salt.state       :1780][INFO    ][28810] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 02:38:55.638167
2020-01-15 02:38:55,639 [salt.state       :1813][INFO    ][28810] Executing state file.managed for [/etc/apache2/conf-available/cinder-wsgi.conf]
2020-01-15 02:38:55,673 [salt.fileclient  :1219][INFO    ][28810] Fetching file from saltenv 'base', ** done ** 'cinder/files/stein/cinder-wsgi.conf'
2020-01-15 02:38:55,814 [salt.state       :300 ][INFO    ][28810] File changed:
New file
2020-01-15 02:38:55,815 [salt.state       :1951][INFO    ][28810] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 02:38:55.815581 duration_in_ms=177.414
2020-01-15 02:38:55,831 [salt.state       :1780][INFO    ][28810] Running state [cinder-wsgi] at time 02:38:55.831517
2020-01-15 02:38:55,832 [salt.state       :1813][INFO    ][28810] Executing state apache_conf.enabled for [cinder-wsgi]
2020-01-15 02:38:55,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['a2enconf', 'cinder-wsgi'] in directory '/root'
2020-01-15 02:38:55,990 [salt.state       :300 ][INFO    ][28810] {'new': 'cinder-wsgi', 'old': None}
2020-01-15 02:38:55,991 [salt.state       :1951][INFO    ][28810] Completed state [cinder-wsgi] at time 02:38:55.991302 duration_in_ms=159.785
2020-01-15 02:38:56,961 [salt.state       :1780][INFO    ][28810] Running state [cinder-api] at time 02:38:56.961754
2020-01-15 02:38:56,962 [salt.state       :1813][INFO    ][28810] Executing state service.dead for [cinder-api]
2020-01-15 02:38:56,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2020-01-15 02:38:57,000 [salt.state       :300 ][INFO    ][28810] The named service cinder-api is not available
2020-01-15 02:38:57,001 [salt.state       :1951][INFO    ][28810] Completed state [cinder-api] at time 02:38:57.001270 duration_in_ms=39.517
2020-01-15 02:38:57,004 [salt.state       :1780][INFO    ][28810] Running state [apache2] at time 02:38:57.004728
2020-01-15 02:38:57,005 [salt.state       :1813][INFO    ][28810] Executing state service.running for [apache2]
2020-01-15 02:38:57,006 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:38:57,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:38:57,085 [salt.state       :300 ][INFO    ][28810] The service apache2 is already running
2020-01-15 02:38:57,086 [salt.state       :1951][INFO    ][28810] Completed state [apache2] at time 02:38:57.086462 duration_in_ms=81.734
2020-01-15 02:38:57,087 [salt.state       :1780][INFO    ][28810] Running state [apache2] at time 02:38:57.087019
2020-01-15 02:38:57,087 [salt.state       :1813][INFO    ][28810] Executing state service.mod_watch for [apache2]
2020-01-15 02:38:57,089 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:38:57,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2020-01-15 02:38:58,503 [salt.state       :300 ][INFO    ][28810] {'apache2': True}
2020-01-15 02:38:58,503 [salt.state       :1951][INFO    ][28810] Completed state [apache2] at time 02:38:58.503708 duration_in_ms=1416.689
2020-01-15 02:38:58,507 [salt.state       :1780][INFO    ][28810] Running state [cinder-scheduler] at time 02:38:58.507318
2020-01-15 02:38:58,507 [salt.state       :1813][INFO    ][28810] Executing state service.running for [cinder-scheduler]
2020-01-15 02:38:58,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2020-01-15 02:38:58,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2020-01-15 02:38:58,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2020-01-15 02:38:58,626 [salt.state       :300 ][INFO    ][28810] The service cinder-scheduler is already running
2020-01-15 02:38:58,627 [salt.state       :1951][INFO    ][28810] Completed state [cinder-scheduler] at time 02:38:58.627411 duration_in_ms=120.091
2020-01-15 02:38:58,628 [salt.state       :1780][INFO    ][28810] Running state [cinder-scheduler] at time 02:38:58.628119
2020-01-15 02:38:58,629 [salt.state       :1813][INFO    ][28810] Executing state service.mod_watch for [cinder-scheduler]
2020-01-15 02:38:58,631 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2020-01-15 02:38:58,660 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28810] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'cinder-scheduler.service'] in directory '/root'
2020-01-15 02:39:05,250 [salt.state       :300 ][INFO    ][28810] {'cinder-scheduler': True}
2020-01-15 02:39:05,250 [salt.state       :1951][INFO    ][28810] Completed state [cinder-scheduler] at time 02:39:05.250842 duration_in_ms=6622.723
2020-01-15 02:39:05,257 [salt.state       :1780][INFO    ][28810] Running state [lvm-driver] at time 02:39:05.257412
2020-01-15 02:39:05,257 [salt.state       :1813][INFO    ][28810] Executing state cinderv3.volume_type_present for [lvm-driver]
2020-01-15 02:39:17,085 [salt.state       :300 ][INFO    ][28810] {u'volume_type': {u'description': None, u'extra_specs': {}, u'os-volume-type-access:is_public': True, u'is_public': True, u'id': u'b8f2809e-0188-4393-80e9-a8ffadd729c6', u'name': u'lvm-driver'}}
2020-01-15 02:39:17,085 [salt.state       :1951][INFO    ][28810] Completed state [lvm-driver] at time 02:39:17.085575 duration_in_ms=11828.161
2020-01-15 02:39:17,086 [salt.state       :1780][INFO    ][28810] Running state [lvm-driver] at time 02:39:17.086825
2020-01-15 02:39:17,087 [salt.state       :1813][INFO    ][28810] Executing state cinderv3.volume_type_key_present for [lvm-driver]
2020-01-15 02:39:22,467 [salt.state       :300 ][INFO    ][28810] {u'volume_backend_name': u'lvm-driver'}
2020-01-15 02:39:22,468 [salt.state       :1951][INFO    ][28810] Completed state [lvm-driver] at time 02:39:22.468090 duration_in_ms=5381.262
2020-01-15 02:39:22,478 [salt.minion      :1711][INFO    ][28810] Returning information for job: 20200115023809938609
2020-01-15 02:40:04,161 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115024004151860
2020-01-15 02:40:04,200 [salt.minion      :1432][INFO    ][30427] Starting a new job with PID 30427
2020-01-15 02:40:12,182 [salt.state       :915 ][INFO    ][30427] Loading fresh modules for state activity
2020-01-15 02:40:14,341 [keyring.backend  :170 ][INFO    ][30427] Loading Windows (alt)
2020-01-15 02:40:14,354 [keyring.backend  :170 ][INFO    ][30427] Loading pyfs
2020-01-15 02:40:14,355 [keyring.backend  :170 ][INFO    ][30427] Loading multi
2020-01-15 02:40:14,356 [keyring.backend  :170 ][INFO    ][30427] Loading Google
2020-01-15 02:40:14,357 [keyring.backend  :170 ][INFO    ][30427] Loading Gnome
2020-01-15 02:40:14,363 [keyring.backend  :170 ][INFO    ][30427] Loading keyczar
2020-01-15 02:40:14,364 [keyring.backend  :170 ][INFO    ][30427] Loading file
2020-01-15 02:40:15,334 [salt.state       :1780][INFO    ][30427] Running state [apache2] at time 02:40:15.334276
2020-01-15 02:40:15,334 [salt.state       :1813][INFO    ][30427] Executing state pkg.installed for [apache2]
2020-01-15 02:40:15,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:40:16,595 [salt.state       :300 ][INFO    ][30427] All specified packages are already installed
2020-01-15 02:40:16,595 [salt.state       :1951][INFO    ][30427] Completed state [apache2] at time 02:40:16.595767 duration_in_ms=1261.492
2020-01-15 02:40:16,596 [salt.state       :1780][INFO    ][30427] Running state [openssl] at time 02:40:16.596220
2020-01-15 02:40:16,596 [salt.state       :1813][INFO    ][30427] Executing state pkg.installed for [openssl]
2020-01-15 02:40:16,606 [salt.state       :300 ][INFO    ][30427] All specified packages are already installed
2020-01-15 02:40:16,606 [salt.state       :1951][INFO    ][30427] Completed state [openssl] at time 02:40:16.606402 duration_in_ms=10.182
2020-01-15 02:40:16,607 [salt.state       :1780][INFO    ][30427] Running state [a2enmod ssl] at time 02:40:16.607326
2020-01-15 02:40:16,607 [salt.state       :1813][INFO    ][30427] Executing state cmd.run for [a2enmod ssl]
2020-01-15 02:40:16,608 [salt.state       :300 ][INFO    ][30427] /etc/apache2/mods-enabled/ssl.load exists
2020-01-15 02:40:16,608 [salt.state       :1951][INFO    ][30427] Completed state [a2enmod ssl] at time 02:40:16.608397 duration_in_ms=1.071
2020-01-15 02:40:16,609 [salt.state       :1780][INFO    ][30427] Running state [a2enmod rewrite] at time 02:40:16.608953
2020-01-15 02:40:16,609 [salt.state       :1813][INFO    ][30427] Executing state cmd.run for [a2enmod rewrite]
2020-01-15 02:40:16,609 [salt.state       :300 ][INFO    ][30427] /etc/apache2/mods-enabled/rewrite.load exists
2020-01-15 02:40:16,609 [salt.state       :1951][INFO    ][30427] Completed state [a2enmod rewrite] at time 02:40:16.609909 duration_in_ms=0.955
2020-01-15 02:40:16,610 [salt.state       :1780][INFO    ][30427] Running state [libapache2-mod-wsgi-py3] at time 02:40:16.610448
2020-01-15 02:40:16,610 [salt.state       :1813][INFO    ][30427] Executing state pkg.installed for [libapache2-mod-wsgi-py3]
2020-01-15 02:40:16,620 [salt.state       :300 ][INFO    ][30427] All specified packages are already installed
2020-01-15 02:40:16,620 [salt.state       :1951][INFO    ][30427] Completed state [libapache2-mod-wsgi-py3] at time 02:40:16.620806 duration_in_ms=10.359
2020-01-15 02:40:16,621 [salt.state       :1780][INFO    ][30427] Running state [a2enmod wsgi] at time 02:40:16.621373
2020-01-15 02:40:16,621 [salt.state       :1813][INFO    ][30427] Executing state cmd.run for [a2enmod wsgi]
2020-01-15 02:40:16,622 [salt.state       :300 ][INFO    ][30427] /etc/apache2/mods-enabled/wsgi.load exists
2020-01-15 02:40:16,622 [salt.state       :1951][INFO    ][30427] Completed state [a2enmod wsgi] at time 02:40:16.622327 duration_in_ms=0.954
2020-01-15 02:40:16,628 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:40:16.628070
2020-01-15 02:40:16,628 [salt.state       :1813][INFO    ][30427] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2020-01-15 02:40:16,628 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2020-01-15 02:40:16,629 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:40:16.629132 duration_in_ms=1.062
2020-01-15 02:40:16,629 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:40:16.629435
2020-01-15 02:40:16,629 [salt.state       :1813][INFO    ][30427] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2020-01-15 02:40:16,630 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2020-01-15 02:40:16,630 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:40:16.630304 duration_in_ms=0.869
2020-01-15 02:40:16,630 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:40:16.630589
2020-01-15 02:40:16,630 [salt.state       :1813][INFO    ][30427] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2020-01-15 02:40:16,631 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2020-01-15 02:40:16,631 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:40:16.631441 duration_in_ms=0.852
2020-01-15 02:40:16,631 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:40:16.631716
2020-01-15 02:40:16,632 [salt.state       :1813][INFO    ][30427] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2020-01-15 02:40:16,632 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2020-01-15 02:40:16,632 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:40:16.632579 duration_in_ms=0.864
2020-01-15 02:40:16,634 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 02:40:16.634936
2020-01-15 02:40:16,635 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2020-01-15 02:40:16,717 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2020-01-15 02:40:16,718 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 02:40:16.717995 duration_in_ms=83.058
2020-01-15 02:40:16,718 [salt.state       :1780][INFO    ][30427] Running state [a2enmod mpm_event] at time 02:40:16.718948
2020-01-15 02:40:16,719 [salt.state       :1813][INFO    ][30427] Executing state cmd.run for [a2enmod mpm_event]
2020-01-15 02:40:16,719 [salt.state       :300 ][INFO    ][30427] /etc/apache2/mods-enabled/mpm_event.load exists
2020-01-15 02:40:16,719 [salt.state       :1951][INFO    ][30427] Completed state [a2enmod mpm_event] at time 02:40:16.719927 duration_in_ms=0.979
2020-01-15 02:40:16,720 [salt.state       :1780][INFO    ][30427] Running state [apache_server_service_task] at time 02:40:16.720942
2020-01-15 02:40:16,721 [salt.state       :1813][INFO    ][30427] Executing state test.show_notification for [apache_server_service_task]
2020-01-15 02:40:16,721 [salt.state       :300 ][INFO    ][30427] Running apache.server.service
2020-01-15 02:40:16,721 [salt.state       :1951][INFO    ][30427] Completed state [apache_server_service_task] at time 02:40:16.721801 duration_in_ms=0.86
2020-01-15 02:40:16,722 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/ports.conf] at time 02:40:16.722348
2020-01-15 02:40:16,722 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/apache2/ports.conf]
2020-01-15 02:40:16,792 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/ports.conf is in the correct state
2020-01-15 02:40:16,792 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/ports.conf] at time 02:40:16.792397 duration_in_ms=70.049
2020-01-15 02:40:16,793 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/conf-available/security.conf] at time 02:40:16.793041
2020-01-15 02:40:16,793 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2020-01-15 02:40:16,866 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/conf-available/security.conf is in the correct state
2020-01-15 02:40:16,867 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/conf-available/security.conf] at time 02:40:16.866945 duration_in_ms=73.904
2020-01-15 02:40:16,878 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 02:40:16.878322
2020-01-15 02:40:16,878 [salt.state       :1813][INFO    ][30427] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2020-01-15 02:40:16,879 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/sites-enabled/000-default.conf is not present
2020-01-15 02:40:16,879 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 02:40:16.879391 duration_in_ms=1.07
2020-01-15 02:40:16,880 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:40:16.880029
2020-01-15 02:40:16,880 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2020-01-15 02:40:17,217 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2020-01-15 02:40:17,217 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:40:17.217882 duration_in_ms=337.853
2020-01-15 02:40:17,218 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:40:17.218782
2020-01-15 02:40:17,219 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2020-01-15 02:40:17,615 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2020-01-15 02:40:17,616 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:40:17.616165 duration_in_ms=397.382
2020-01-15 02:40:17,617 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:40:17.617246
2020-01-15 02:40:17,617 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2020-01-15 02:40:18,067 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2020-01-15 02:40:18,067 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:40:18.067592 duration_in_ms=450.346
2020-01-15 02:40:18,068 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:40:18.068385
2020-01-15 02:40:18,068 [salt.state       :1813][INFO    ][30427] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2020-01-15 02:40:18,071 [salt.state       :300 ][INFO    ][30427] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2020-01-15 02:40:18,071 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:40:18.071524 duration_in_ms=3.139
2020-01-15 02:40:18,074 [salt.state       :1780][INFO    ][30427] Running state [apache2] at time 02:40:18.074749
2020-01-15 02:40:18,075 [salt.state       :1813][INFO    ][30427] Executing state service.running for [apache2]
2020-01-15 02:40:18,076 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2020-01-15 02:40:18,165 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:40:18,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:40:18,259 [salt.state       :300 ][INFO    ][30427] The service apache2 is already running
2020-01-15 02:40:18,261 [salt.state       :1951][INFO    ][30427] Completed state [apache2] at time 02:40:18.261103 duration_in_ms=186.352
2020-01-15 02:40:18,264 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/conf-enabled/security.conf] at time 02:40:18.264545
2020-01-15 02:40:18,265 [salt.state       :1813][INFO    ][30427] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2020-01-15 02:40:18,272 [salt.state       :300 ][INFO    ][30427] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2020-01-15 02:40:18,273 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/conf-enabled/security.conf] at time 02:40:18.272896 duration_in_ms=8.351
2020-01-15 02:40:18,273 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:40:18.273713
2020-01-15 02:40:18,274 [salt.state       :1813][INFO    ][30427] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2020-01-15 02:40:18,275 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2020-01-15 02:40:18,276 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:40:18.276019 duration_in_ms=2.305
2020-01-15 02:40:18,281 [salt.state       :1780][INFO    ][30427] Running state [cinder-scheduler] at time 02:40:18.281754
2020-01-15 02:40:18,282 [salt.state       :1813][INFO    ][30427] Executing state pkg.installed for [cinder-scheduler]
2020-01-15 02:40:18,309 [salt.state       :300 ][INFO    ][30427] All specified packages are already installed
2020-01-15 02:40:18,310 [salt.state       :1951][INFO    ][30427] Completed state [cinder-scheduler] at time 02:40:18.310522 duration_in_ms=28.769
2020-01-15 02:40:18,314 [salt.state       :1780][INFO    ][30427] Running state [cinder_controller_ssl_mysql] at time 02:40:18.314800
2020-01-15 02:40:18,315 [salt.state       :1813][INFO    ][30427] Executing state test.show_notification for [cinder_controller_ssl_mysql]
2020-01-15 02:40:18,316 [salt.state       :300 ][INFO    ][30427] Running cinder._ssl.controller_mysql
2020-01-15 02:40:18,317 [salt.state       :1951][INFO    ][30427] Completed state [cinder_controller_ssl_mysql] at time 02:40:18.316967 duration_in_ms=2.168
2020-01-15 02:40:18,318 [salt.state       :1780][INFO    ][30427] Running state [cinder_controller_ssl_rabbitmq] at time 02:40:18.318312
2020-01-15 02:40:18,319 [salt.state       :1813][INFO    ][30427] Executing state test.show_notification for [cinder_controller_ssl_rabbitmq]
2020-01-15 02:40:18,319 [salt.state       :300 ][INFO    ][30427] Running cinder._ssl.rabbitmq
2020-01-15 02:40:18,320 [salt.state       :1951][INFO    ][30427] Completed state [cinder_controller_ssl_rabbitmq] at time 02:40:18.320250 duration_in_ms=1.937
2020-01-15 02:40:18,322 [salt.state       :1780][INFO    ][30427] Running state [/etc/cinder/cinder.conf] at time 02:40:18.322418
2020-01-15 02:40:18,323 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/cinder/cinder.conf]
2020-01-15 02:40:18,842 [salt.state       :300 ][INFO    ][30427] File /etc/cinder/cinder.conf is in the correct state
2020-01-15 02:40:18,842 [salt.state       :1951][INFO    ][30427] Completed state [/etc/cinder/cinder.conf] at time 02:40:18.842735 duration_in_ms=520.315
2020-01-15 02:40:18,845 [salt.state       :1780][INFO    ][30427] Running state [/etc/cinder/api-paste.ini] at time 02:40:18.845006
2020-01-15 02:40:18,845 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/cinder/api-paste.ini]
2020-01-15 02:40:19,012 [salt.state       :300 ][INFO    ][30427] File /etc/cinder/api-paste.ini is in the correct state
2020-01-15 02:40:19,013 [salt.state       :1951][INFO    ][30427] Completed state [/etc/cinder/api-paste.ini] at time 02:40:19.013239 duration_in_ms=168.233
2020-01-15 02:40:19,015 [salt.state       :1780][INFO    ][30427] Running state [cinder-manage db sync; sleep 5;] at time 02:40:19.015345
2020-01-15 02:40:19,016 [salt.state       :1813][INFO    ][30427] Executing state cmd.run for [cinder-manage db sync; sleep 5;]
2020-01-15 02:40:19,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command 'cinder-manage db sync; sleep 5;' as user 'cinder' in directory '/var/lib/cinder'
2020-01-15 02:40:19,222 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115024019205045
2020-01-15 02:40:19,268 [salt.minion      :1432][INFO    ][30511] Starting a new job with PID 30511
2020-01-15 02:40:19,329 [salt.minion      :1711][INFO    ][30511] Returning information for job: 20200115024019205045
2020-01-15 02:40:27,399 [salt.state       :300 ][INFO    ][30427] {'pid': 30509, 'retcode': 0, 'stderr': '', 'stdout': ''}
2020-01-15 02:40:27,401 [salt.state       :1951][INFO    ][30427] Completed state [cinder-manage db sync; sleep 5;] at time 02:40:27.401206 duration_in_ms=8385.859
2020-01-15 02:40:27,404 [salt.state       :1780][INFO    ][30427] Running state [/etc/default/cinder-scheduler] at time 02:40:27.404663
2020-01-15 02:40:27,405 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/default/cinder-scheduler]
2020-01-15 02:40:27,459 [salt.state       :300 ][INFO    ][30427] File /etc/default/cinder-scheduler is in the correct state
2020-01-15 02:40:27,459 [salt.state       :1951][INFO    ][30427] Completed state [/etc/default/cinder-scheduler] at time 02:40:27.459840 duration_in_ms=55.177
2020-01-15 02:40:27,461 [salt.state       :1780][INFO    ][30427] Running state [/etc/cinder/policy.json] at time 02:40:27.461273
2020-01-15 02:40:27,462 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/cinder/policy.json]
2020-01-15 02:40:27,462 [salt.loaded.int.states.file:2298][WARNING ][30427] State for file: /etc/cinder/policy.json - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2020-01-15 02:40:27,464 [salt.state       :300 ][INFO    ][30427] File /etc/cinder/policy.json exists with proper permissions. No changes made.
2020-01-15 02:40:27,465 [salt.state       :1951][INFO    ][30427] Completed state [/etc/cinder/policy.json] at time 02:40:27.465491 duration_in_ms=4.218
2020-01-15 02:40:27,466 [salt.state       :1780][INFO    ][30427] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 02:40:27.466791
2020-01-15 02:40:27,467 [salt.state       :1813][INFO    ][30427] Executing state file.managed for [/etc/apache2/conf-available/cinder-wsgi.conf]
2020-01-15 02:40:27,625 [salt.state       :300 ][INFO    ][30427] File /etc/apache2/conf-available/cinder-wsgi.conf is in the correct state
2020-01-15 02:40:27,626 [salt.state       :1951][INFO    ][30427] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 02:40:27.625941 duration_in_ms=159.151
2020-01-15 02:40:27,629 [salt.state       :1780][INFO    ][30427] Running state [cinder-wsgi] at time 02:40:27.629350
2020-01-15 02:40:27,630 [salt.state       :1813][INFO    ][30427] Executing state apache_conf.enabled for [cinder-wsgi]
2020-01-15 02:40:27,631 [salt.state       :300 ][INFO    ][30427] cinder-wsgi already enabled.
2020-01-15 02:40:27,631 [salt.state       :1951][INFO    ][30427] Completed state [cinder-wsgi] at time 02:40:27.631511 duration_in_ms=2.161
2020-01-15 02:40:27,633 [salt.state       :1780][INFO    ][30427] Running state [cinder-api] at time 02:40:27.632909
2020-01-15 02:40:27,633 [salt.state       :1813][INFO    ][30427] Executing state service.dead for [cinder-api]
2020-01-15 02:40:27,635 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2020-01-15 02:40:27,678 [salt.state       :300 ][INFO    ][30427] The named service cinder-api is not available
2020-01-15 02:40:27,680 [salt.state       :1951][INFO    ][30427] Completed state [cinder-api] at time 02:40:27.680205 duration_in_ms=47.296
2020-01-15 02:40:27,688 [salt.state       :1780][INFO    ][30427] Running state [apache2] at time 02:40:27.688675
2020-01-15 02:40:27,689 [salt.state       :1813][INFO    ][30427] Executing state service.running for [apache2]
2020-01-15 02:40:27,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:40:27,733 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:40:27,762 [salt.state       :300 ][INFO    ][30427] The service apache2 is already running
2020-01-15 02:40:27,764 [salt.state       :1951][INFO    ][30427] Completed state [apache2] at time 02:40:27.763791 duration_in_ms=75.115
2020-01-15 02:40:27,770 [salt.state       :1780][INFO    ][30427] Running state [cinder-scheduler] at time 02:40:27.770365
2020-01-15 02:40:27,771 [salt.state       :1813][INFO    ][30427] Executing state service.running for [cinder-scheduler]
2020-01-15 02:40:27,773 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2020-01-15 02:40:27,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2020-01-15 02:40:27,867 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30427] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2020-01-15 02:40:27,910 [salt.state       :300 ][INFO    ][30427] The service cinder-scheduler is already running
2020-01-15 02:40:27,911 [salt.state       :1951][INFO    ][30427] Completed state [cinder-scheduler] at time 02:40:27.911580 duration_in_ms=141.214
2020-01-15 02:40:27,921 [salt.state       :1780][INFO    ][30427] Running state [lvm-driver] at time 02:40:27.921068
2020-01-15 02:40:27,922 [salt.state       :1813][INFO    ][30427] Executing state cinderv3.volume_type_present for [lvm-driver]
2020-01-15 02:40:31,352 [salt.state       :300 ][INFO    ][30427] volume_type lvm-driver is in desired state
2020-01-15 02:40:31,353 [salt.state       :1951][INFO    ][30427] Completed state [lvm-driver] at time 02:40:31.353157 duration_in_ms=3432.087
2020-01-15 02:40:31,355 [salt.state       :1780][INFO    ][30427] Running state [lvm-driver] at time 02:40:31.355270
2020-01-15 02:40:31,356 [salt.state       :1813][INFO    ][30427] Executing state cinderv3.volume_type_key_present for [lvm-driver]
2020-01-15 02:40:35,026 [salt.state       :300 ][INFO    ][30427] {u'volume_backend_name': u'lvm-driver'}
2020-01-15 02:40:35,027 [salt.state       :1951][INFO    ][30427] Completed state [lvm-driver] at time 02:40:35.027106 duration_in_ms=3671.835
2020-01-15 02:40:35,034 [salt.minion      :1711][INFO    ][30427] Returning information for job: 20200115024004151860
2020-01-15 02:40:54,405 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115024054397830
2020-01-15 02:40:54,439 [salt.minion      :1432][INFO    ][30536] Starting a new job with PID 30536
2020-01-15 02:41:01,688 [salt.state       :915 ][INFO    ][30536] Loading fresh modules for state activity
2020-01-15 02:41:01,814 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/init.sls'
2020-01-15 02:41:01,883 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/server.sls'
2020-01-15 02:41:02,287 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/db/offline_sync.sls'
2020-01-15 02:41:02,410 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/db/plugins/midonet.sls'
2020-01-15 02:41:02,539 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/db/plugins/service/bgpvpn.sls'
2020-01-15 02:41:02,797 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/fwaas.sls'
2020-01-15 02:41:03,031 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/mysql.sls'
2020-01-15 02:41:03,227 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/rabbitmq.sls'
2020-01-15 02:41:03,871 [keyring.backend  :170 ][INFO    ][30536] Loading Windows (alt)
2020-01-15 02:41:03,898 [keyring.backend  :170 ][INFO    ][30536] Loading pyfs
2020-01-15 02:41:03,901 [keyring.backend  :170 ][INFO    ][30536] Loading multi
2020-01-15 02:41:03,902 [keyring.backend  :170 ][INFO    ][30536] Loading Google
2020-01-15 02:41:03,904 [keyring.backend  :170 ][INFO    ][30536] Loading Gnome
2020-01-15 02:41:03,909 [keyring.backend  :170 ][INFO    ][30536] Loading keyczar
2020-01-15 02:41:03,910 [keyring.backend  :170 ][INFO    ][30536] Loading file
2020-01-15 02:41:05,000 [salt.state       :1780][INFO    ][30536] Running state [python3-networking-odl] at time 02:41:05.000206
2020-01-15 02:41:05,000 [salt.state       :1813][INFO    ][30536] Executing state pkg.installed for [python3-networking-odl]
2020-01-15 02:41:05,001 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:41:06,194 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['apt-cache', '-q', 'policy', 'python3-networking-odl'] in directory '/root'
2020-01-15 02:41:06,899 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:41:09,425 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115024109412539
2020-01-15 02:41:09,457 [salt.minion      :1432][INFO    ][31068] Starting a new job with PID 31068
2020-01-15 02:41:09,507 [salt.minion      :1711][INFO    ][31068] Returning information for job: 20200115024109412539
2020-01-15 02:41:11,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:41:11,972 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python3-networking-odl'] in directory '/root'
2020-01-15 02:41:39,549 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115024139536751
2020-01-15 02:41:39,584 [salt.minion      :1432][INFO    ][31888] Starting a new job with PID 31888
2020-01-15 02:41:39,647 [salt.minion      :1711][INFO    ][31888] Returning information for job: 20200115024139536751
2020-01-15 02:42:00,239 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:42:00,400 [salt.state       :300 ][INFO    ][30536] Made the following changes:
'python3-ceilometer' changed from 'absent' to '1:12.0.0-0ubuntu1.1~cloud0'
'python3-pysnmp4' changed from 'absent' to '4.4.6+repack1-1~cloud0'
'python3-openstack-auth' changed from 'absent' to '1'
'python3-networking-odl' changed from 'absent' to '1:14.0.0-0ubuntu1~cloud0'
'python3-compressor' changed from 'absent' to '1'
'networking-l2gw-common' changed from 'absent' to '1:14.0.0-0ubuntu1~cloud0'
'python3-neutron' changed from 'absent' to '2:14.0.3-0ubuntu1~cloud0'
'python3-bson' changed from 'absent' to '3.6.1+dfsg1-1'
'ceilometer-common' changed from 'absent' to '1:12.0.0-0ubuntu1.1~cloud0'
'libipset3' changed from 'absent' to '6.34-1'
'python3-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1'
'python3-gridfs' changed from 'absent' to '3.6.1+dfsg1-1'
'networking-bgpvpn-common' changed from 'absent' to '10.0.0-0ubuntu1~cloud0'
'python3-django-appconf' changed from 'absent' to '1.0.2-3'
'python3-bson-ext' changed from 'absent' to '3.6.1+dfsg1-1'
'openstack-dashboard-common' changed from 'absent' to '3:15.1.1-0ubuntu1.1~cloud0'
'python3-pyscss' changed from 'absent' to '1.3.5-2build2'
'python3-django-babel' changed from 'absent' to '0.6.2-1'
'python3-websocket' changed from 'absent' to '0.53.0-1~cloud0'
'python3-django-debreach' changed from 'absent' to '1.5.2-0ubuntu1~cloud0'
'python3-django-compressor' changed from 'absent' to '2.2-4'
'python3-django-openstack-auth' changed from 'absent' to '3:15.1.1-0ubuntu1.1~cloud0'
'python3-networking-l2gw' changed from 'absent' to '1:14.0.0-0ubuntu1~cloud0'
'python3-networking-sfc' changed from 'absent' to '8.0.0-0ubuntu1~cloud0'
'python-django-common' changed from 'absent' to '1:1.11.11-1ubuntu1.6'
'python3-os-ken' changed from 'absent' to '0.3.1-0ubuntu2~cloud0'
'python3-django' changed from 'absent' to '1:1.11.11-1ubuntu1.6'
'python3-django-horizon' changed from 'absent' to '3:15.1.1-0ubuntu1.1~cloud0'
'python3-jsonpath-rw' changed from 'absent' to '1.4.0-3'
'python3-rjsmin' changed from 'absent' to '1.0.12+dfsg1-2ubuntu3'
'python3-lazy-object-proxy' changed from 'absent' to '1.3.1-1'
'ipset' changed from 'absent' to '6.34-1'
'networking-odl-common' changed from 'absent' to '1:14.0.0-0ubuntu1~cloud0'
'python3-pint' changed from 'absent' to '0.8.1-2'
'python3-tinyrpc' changed from 'absent' to '0.6-1'
'python3-django-pyscss' changed from 'absent' to '2.0.2-8'
'networking-sfc-common' changed from 'absent' to '8.0.0-0ubuntu1~cloud0'
'python3-cotyledon' changed from 'absent' to '1.6.8-0ubuntu1'
'python3-pymongo' changed from 'absent' to '3.6.1+dfsg1-1'
'python3-pycryptodome' changed from 'absent' to '3.4.7-1ubuntu1'
'python3-networking-bgpvpn' changed from 'absent' to '10.0.0-0ubuntu1~cloud0'
'python3-pymongo-ext' changed from 'absent' to '3.6.1+dfsg1-1'
'python3-csscompressor' changed from 'absent' to '0.9.4-2'
'ipset-6.34' changed from 'absent' to '1'
'python3-pysmi' changed from 'absent' to '0.2.2-1'
'python3-astroid' changed from 'absent' to '2.1.0-2~cloud0'
'neutron-common' changed from 'absent' to '2:14.0.3-0ubuntu1~cloud0'
'python3-rcssmin' changed from 'absent' to '1.0.6-1ubuntu3'
'python3-neutron-lbaas' changed from 'absent' to '2:14.0.1-0ubuntu1~cloud0'

2020-01-15 02:42:00,489 [salt.state       :915 ][INFO    ][30536] Loading fresh modules for state activity
2020-01-15 02:42:00,557 [salt.state       :1951][INFO    ][30536] Completed state [python3-networking-odl] at time 02:42:00.557719 duration_in_ms=55557.514
2020-01-15 02:42:00,568 [salt.state       :1780][INFO    ][30536] Running state [neutron-server] at time 02:42:00.568247
2020-01-15 02:42:01,828 [salt.state       :1780][INFO    ][30536] Running state [/usr/sbin/policy-rc.d] at time 02:42:01.828098
2020-01-15 02:42:01,829 [salt.state       :1813][INFO    ][30536] Executing state file.managed for [/usr/sbin/policy-rc.d]
2020-01-15 02:42:01,839 [salt.state       :300 ][INFO    ][30536] File changed:
New file
2020-01-15 02:42:01,839 [salt.state       :1951][INFO    ][30536] Completed state [/usr/sbin/policy-rc.d] at time 02:42:01.839583 duration_in_ms=11.487
2020-01-15 02:42:01,840 [salt.state       :1780][INFO    ][30536] Running state [neutron-server] at time 02:42:01.840880
2020-01-15 02:42:01,841 [salt.state       :1813][INFO    ][30536] Executing state pkg.installed for [neutron-server]
2020-01-15 02:42:01,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:42:02,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'neutron-server'] in directory '/root'
2020-01-15 02:42:09,385 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:42:09,536 [salt.state       :300 ][INFO    ][30536] Made the following changes:
'neutron-server' changed from 'absent' to '2:14.0.3-0ubuntu1~cloud0'
'neutron-plugin' changed from 'absent' to '1'
'neutron-plugin-ml2' changed from 'absent' to '2:14.0.3-0ubuntu1~cloud0'

2020-01-15 02:42:09,613 [salt.state       :915 ][INFO    ][30536] Loading fresh modules for state activity
2020-01-15 02:42:09,708 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115024209695370
2020-01-15 02:42:09,722 [salt.state       :1951][INFO    ][30536] Completed state [neutron-server] at time 02:42:09.722507 duration_in_ms=7881.627
2020-01-15 02:42:09,739 [salt.state       :1780][INFO    ][30536] Running state [neutron-plugin-ml2] at time 02:42:09.739264
2020-01-15 02:42:09,740 [salt.state       :1813][INFO    ][30536] Executing state pkg.installed for [neutron-plugin-ml2]
2020-01-15 02:42:09,749 [salt.minion      :1432][INFO    ][32557] Starting a new job with PID 32557
2020-01-15 02:42:09,786 [salt.minion      :1711][INFO    ][32557] Returning information for job: 20200115024209695370
2020-01-15 02:42:10,710 [salt.state       :300 ][INFO    ][30536] All specified packages are already installed
2020-01-15 02:42:10,711 [salt.state       :1951][INFO    ][30536] Completed state [neutron-plugin-ml2] at time 02:42:10.711361 duration_in_ms=972.098
2020-01-15 02:42:10,714 [salt.state       :1780][INFO    ][30536] Running state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 02:42:10.714233
2020-01-15 02:42:10,714 [salt.state       :1813][INFO    ][30536] Executing state file.managed for [/etc/neutron/plugins/ml2/ml2_conf.ini]
2020-01-15 02:42:10,750 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/files/stein/ml2_conf.ini'
2020-01-15 02:42:10,950 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/_ml2_conf.vpp.ini'
2020-01-15 02:42:10,970 [salt.state       :300 ][INFO    ][30536] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-
 #
 # From oslo.log
 #
@@ -14,7 +14,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -65,63 +65,27 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when
-# the service was started) is used when scheduling the next rotation. (string
-# value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
 # Additional data to append to log message when logging level for the message
-# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -150,18 +114,16 @@
 #fatal_deprecations = false
 
 
+
 [l2pop]
 
 #
 # From neutron.ml2
 #
 
-# DEPRECATED: Delay within which agent is expected to update existing ports
-# when it restarts. This option is deprecated in favor of direct RPC restart
-# state transfer and will be removed in a future release. (integer value)
-# This option is deprecated for removal since Stein.
-# Its value may be silently ignored in the future.
-#agent_boot_time = 180
+# Delay within which agent is expected to update existing ports when it
+# restarts (integer value)
+agent_boot_time = 180
 
 
 [ml2]
@@ -177,28 +139,31 @@
 # Ordered list of network_types to allocate as tenant networks. The default
 # value 'local' is useful for single-box testing but provides no connectivity
 # between hosts. (list value)
-#tenant_network_types = local
+tenant_network_types = flat,vxlan
 
 # An ordered list of networking mechanism driver entrypoints to be loaded from
 # the neutron.ml2.mechanism_drivers namespace. (list value)
-#mechanism_drivers =
+mechanism_drivers = opendaylight_v2
 
 # An ordered list of extension driver entrypoints to be loaded from the
 # neutron.ml2.extension_drivers namespace. For example: extension_drivers =
 # port_security,qos (list value)
 #extension_drivers =
 
+
+extension_drivers = port_security
+
 # Maximum size of an IP packet (MTU) that can traverse the underlying physical
 # network infrastructure without fragmentation when using an overlay/tunnel
 # protocol. This option allows specifying a physical network MTU value that
 # differs from the default global_physnet_mtu value. (integer value)
-#path_mtu = 0
+path_mtu = 1500
 
 # A list of mappings of physical networks to MTU values. The format of the
 # mapping is <physnet>:<mtu val>. This mapping allows specifying a physical
 # network MTU value that differs from the default global_physnet_mtu value.
 # (list value)
-#physical_network_mtus =
+physical_network_mtus = physnet1:1500
 
 # Default network type for external networks when no provider attributes are
 # specified. By default it is None, which means that if provider attributes are
@@ -222,7 +187,7 @@
 # List of physical_network names with which flat networks can be created. Use
 # default '*' to allow flat networks with arbitrary physical_network names. Use
 # an empty list to disable flat networks. (list value)
-#flat_networks = *
+flat_networks = *
 
 
 [ml2_type_geneve]
@@ -233,14 +198,14 @@
 
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # Geneve VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
+vni_ranges = 1:65536
 
 # Geneve encapsulation header size is dynamic, this value is used to calculate
 # the maximum MTU for the driver. This is the sum of the sizes of the outer ETH
 # + IP + UDP + GENEVE header sizes. The default size for this field is 50,
 # which is the size of the Geneve header without any additional option headers.
 # (integer value)
-#max_header_size = 30
+max_header_size = 38
 
 
 [ml2_type_gre]
@@ -251,7 +216,7 @@
 
 # Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE
 # tunnel IDs that are available for tenant network allocation (list value)
-#tunnel_id_ranges =
+tunnel_id_ranges = 2:65535
 
 
 [ml2_type_vlan]
@@ -264,7 +229,7 @@
 # specifying physical_network names usable for VLAN provider and tenant
 # networks, as well as ranges of VLAN tags on each available for allocation to
 # tenant networks. (list value)
-#network_vlan_ranges =
+network_vlan_ranges = 
 
 
 [ml2_type_vxlan]
@@ -275,30 +240,12 @@
 
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # VXLAN VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
+vni_ranges = 2:65535
 
 # Multicast group for VXLAN. When configured, will enable sending all broadcast
 # traffic to this multicast group. When left unconfigured, will disable
 # multicast VXLAN mode. (string value)
-#vxlan_group = <None>
-
-
-[ovs_driver]
-
-#
-# From neutron.ml2
-#
-
-# Comma-separated list of VNIC types for which support is administratively
-# prohibited by the mechanism driver. Please note that the supported vnic_types
-# depend on your network interface card, on the kernel version of your
-# operating system, and on other factors, like OVS version. In case of ovs
-# mechanism driver the valid vnic types are normal and direct. Note that direct
-# is supported only from kernel 4.8, and from ovs 2.8.0. Bind DIRECT (SR-IOV)
-# port allows to offload the OVS flows using tc to the SR-IOV NIC. This allows
-# to  support hardware offload via tc and that allows us to manage the VF by
-# OpenFlow control plane using representor net-device. (list value)
-#vnic_type_blacklist =
+vxlan_group = 224.0.0.1
 
 
 [securitygroup]
@@ -308,31 +255,33 @@
 #
 
 # Driver for security groups firewall in the L2 agent (string value)
-#firewall_driver = <None>
+firewall_driver = openvswitch
 
 # Controls whether the neutron security group API is enabled in the server. It
 # should be false when using no security groups or using the nova security
 # group API. (boolean value)
-#enable_security_group = true
+enable_security_group = True
 
 # Use ipset to speed-up the iptables based security groups. Enabling ipset
 # support requires that ipset is installed on L2 agent node. (boolean value)
 #enable_ipset = true
-
-# Comma-separated list of ethertypes to be permitted, in hexadecimal (starting
-# with "0x"). For example, "0x4008" to permit InfiniBand. (list value)
-#permitted_ethertypes =
-
-
-[sriov_driver]
-
-#
-# From neutron.ml2
-#
-
-# Comma-separated list of VNIC types for which support is administratively
-# prohibited by the mechanism driver. Please note that the supported vnic_types
-# depend on your network interface card, on the kernel version of your
-# operating system, and on other factors. In case of sriov mechanism driver the
-# valid VNIC types are direct, macvtap and direct-physical. (list value)
-#vnic_type_blacklist =
+[ml2_odl]
+# HTTP URL of OpenDaylight REST interface. (string value)
+url = http://192.168.10.39:8282/controller/nb/v2/neutron
+
+# HTTP username for authentication. (string value)
+username = admin
+
+# HTTP password for authentication. (string value)
+password = admin
+
+# Name of the controller to be used for port binding. (string value)
+port_binding_controller = pseudo-agentdb-binding
+
+# Enable websocket for pseudo-agent-port-binding. (boolean value)
+enable_websocket_pseudo_agentdb = false
+
+# Enables the networking-odl driver to supply special neutron ports of
+# "dhcp" type to OpenDaylight Controller for its use in providing DHCP
+# Service. (boolean value)
+enable_dhcp_service = false

2020-01-15 02:42:10,971 [salt.state       :1951][INFO    ][30536] Completed state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 02:42:10.971044 duration_in_ms=256.811
2020-01-15 02:42:10,973 [salt.state       :1780][INFO    ][30536] Running state [neutron_ssl_mysql] at time 02:42:10.973429
2020-01-15 02:42:10,973 [salt.state       :1813][INFO    ][30536] Executing state test.show_notification for [neutron_ssl_mysql]
2020-01-15 02:42:10,974 [salt.state       :300 ][INFO    ][30536] Running neutron._ssl.mysql
2020-01-15 02:42:10,974 [salt.state       :1951][INFO    ][30536] Completed state [neutron_ssl_mysql] at time 02:42:10.974251 duration_in_ms=0.822
2020-01-15 02:42:10,974 [salt.state       :1780][INFO    ][30536] Running state [neutron_server_ssl_rabbitmq] at time 02:42:10.974620
2020-01-15 02:42:10,974 [salt.state       :1813][INFO    ][30536] Executing state test.show_notification for [neutron_server_ssl_rabbitmq]
2020-01-15 02:42:10,975 [salt.state       :300 ][INFO    ][30536] Running neutron._ssl.rabbitmq
2020-01-15 02:42:10,975 [salt.state       :1951][INFO    ][30536] Completed state [neutron_server_ssl_rabbitmq] at time 02:42:10.975411 duration_in_ms=0.791
2020-01-15 02:42:10,976 [salt.state       :1780][INFO    ][30536] Running state [/etc/neutron/neutron.conf] at time 02:42:10.976034
2020-01-15 02:42:10,976 [salt.state       :1813][INFO    ][30536] Executing state file.managed for [/etc/neutron/neutron.conf]
2020-01-15 02:42:11,000 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/files/stein/neutron-server.conf'
2020-01-15 02:42:11,426 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/service/_wsgi_default.conf'
2020-01-15 02:42:11,644 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/stein/oslo/_concurrency.conf'
2020-01-15 02:42:11,804 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/files/stein/bgpvpn.conf'
2020-01-15 02:42:11,847 [salt.state       :300 ][INFO    ][30536] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-core_plugin = ml2
 
 #
 # From neutron
@@ -10,28 +10,19 @@
 #state_path = /var/lib/neutron
 
 # The host IP to bind to. (host address value)
-#bind_host = 0.0.0.0
+bind_host = 192.168.10.36
 
 # The port to bind to (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#bind_port = 9696
-
-# The path for API extensions. Note that this can be a colon-separated list of
-# paths. For example: api_extensions_path =
-# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
-# neutron.extensions is appended to this, so if your extensions are in there
-# you don't need to specify them here. (string value)
-#api_extensions_path =
+bind_port = 9696
+# The core plugin Neutron will use (string value)
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+# The service plugins Neutron will use (list value)
+service_plugins = odl-router_v2,metering,trunk
 
 # The type of authentication to use (string value)
 #auth_strategy = keystone
-
-# The core plugin Neutron will use (string value)
-#core_plugin = <None>
-
-# The service plugins Neutron will use (list value)
-#service_plugins =
 
 # The base MAC address Neutron will use for VIFs. The first 3 octets will
 # remain unchanged. If the 4th octet is not 00, it will also be used. The
@@ -43,7 +34,7 @@
 
 # The maximum number of items returned in a single response, value was
 # 'infinite' or negative integer means no limit (string value)
-#pagination_max_limit = -1
+pagination_max_limit = -1
 
 # Default value of availability zone hints. The availability zone aware
 # schedulers use this when the resources availability_zone_hints is empty.
@@ -69,10 +60,10 @@
 
 # DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
 # lease times. (integer value)
-#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
 
 # Domain to use for building the hostnames (string value)
-#dns_domain = openstacklocal
+dns_domain = novalocal
 
 # Driver for external DNS integration. (string value)
 #external_dns_driver = <None>
@@ -83,15 +74,11 @@
 # Allow overlapping IP support in Neutron. Attention: the following parameter
 # MUST be set to False if Neutron is being used in conjunction with Nova
 # security groups. (boolean value)
-#allow_overlapping_ips = false
+allow_overlapping_ips = true
 
 # Hostname to be used by the Neutron server, agents and services running on
 # this machine. All the agents and services running on this machine must use
 # the same host value. (host address value)
-#
-# This option has a sample default set, which means that
-# its actual default value may vary from the one documented
-# below.
 #host = example.domain
 
 # This string is prepended to the normal URL that is returned in links to the
@@ -100,22 +87,16 @@
 #network_link_prefix = <None>
 
 # Send notification to nova when port status changes (boolean value)
-#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = true
 
 # Send notification to nova when port data (fixed_ips/floatingip) changes so
 # nova can update its cache. (boolean value)
-#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = true
 
 # Number of seconds between sending events to nova if there are any events to
 # send. (integer value)
 #send_events_interval = 2
 
-# Set process name to match child worker role. Available options are: 'off' -
-# retains the previous behavior; 'on' - renames processes to 'neutron-server:
-# role (original string)'; 'brief' - renames the same as 'on', but without the
-# original string, such as 'neutron-server: role'. (string value)
-#setproctitle = on
-
 # Neutron IPAM (IP address management) driver to use. By default, the reference
 # implementation of the Neutron IPAM driver is used. (string value)
 #ipam_driver = internal
@@ -125,7 +106,7 @@
 #vlan_transparent = false
 
 # If True, then allow plugins to decide whether to perform validations on
-# filter parameters. Filter validation is enabled if this config is turned on
+# filter parameters. Filter validation is enabled if this configis turned on
 # and it is supported by all plugins (boolean value)
 #filter_validation = true
 
@@ -135,7 +116,7 @@
 # neutron automatically subtracts the overlay protocol overhead from this
 # value. Defaults to 1500, the standard value for Ethernet. (integer value)
 # Deprecated group/name - [ml2]/segment_mtu
-#global_physnet_mtu = 1500
+global_physnet_mtu = 1500
 
 # Number of backlog requests to configure the socket with (integer value)
 #backlog = 4096
@@ -150,25 +131,21 @@
 #periodic_interval = 40
 
 # Number of separate API worker processes for service. If not specified, the
-# default is equal to the number of CPUs available for best performance, capped
-# by potential RAM usage. (integer value)
+# default is equal to the number of CPUs available for best performance.
+# (integer value)
 #api_workers = <None>
 
-# Number of RPC worker processes for service. If not specified, the default is
-# equal to half the number of API workers. (integer value)
-#rpc_workers = <None>
+# Number of RPC worker processes for service. (integer value)
+rpc_workers = 4
 
 # Number of RPC worker processes dedicated to state reports queue. (integer
 # value)
-#rpc_state_report_workers = 1
+rpc_state_report_workers = 4
 
 # Range of seconds to randomly delay when starting the periodic task scheduler
 # to reduce stampeding. (Disable by setting to 0) (integer value)
 #periodic_fuzzy_delay = 5
 
-# Maximum seconds to wait for a response from an RPC call. (integer value)
-#rpc_response_max_timeout = 600
-
 #
 # From neutron.agent
 #
@@ -193,7 +170,7 @@
 
 # Seconds to regard the agent is down; should be at least twice
 # report_interval, to be sure the agent is down for good. (integer value)
-#agent_down_time = 75
+agent_down_time = 300
 
 # Representing the resource type whose load is being reported by the agent.
 # This can be "networks", "subnets" or "ports". When specified (Default is
@@ -236,7 +213,7 @@
 # greater than 1, the scheduler automatically assigns multiple DHCP agents for
 # a given tenant network, providing high availability for DHCP service.
 # (integer value)
-#dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
 
 # Enable services on an agent with admin_state_up False. If this option is
 # False, when admin_state_up of an agent is turned False, services on it will
@@ -255,28 +232,28 @@
 
 # System-wide flag to determine the type of router that tenants can create.
 # Only admin can override. (boolean value)
-#router_distributed = false
+router_distributed = False
 
 # Determine if setup is configured for DVR. If False, DVR API extension will be
 # disabled. (boolean value)
-#enable_dvr = true
+enable_dvr = False
 
 # Driver to use for scheduling router to a default L3 agent (string value)
-#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
 
 # Allow auto scheduling of routers to L3 agent. (boolean value)
 #router_auto_schedule = true
 
 # Automatically reschedule routers from offline L3 agents to online L3 agents.
 # (boolean value)
-#allow_automatic_l3agent_failover = false
+allow_automatic_l3agent_failover = true
 
 # Enable HA mode for virtual routers. (boolean value)
-#l3_ha = false
+l3_ha = False
 
 # Maximum number of L3 agents which a HA router will be scheduled on. If it is
 # set to 0 then the router will be scheduled on every agent. (integer value)
-#max_l3_agents_per_router = 3
+max_l3_agents_per_router = 0
 
 # Subnet used for the l3 HA admin network. (string value)
 #l3_ha_net_cidr = 169.254.192.0/18
@@ -297,7 +274,6 @@
 
 # Maximum number of allowed address pairs (integer value)
 #max_allowed_address_pair = 10
-
 #
 # From oslo.log
 #
@@ -312,7 +288,7 @@
 # files, see the Python logging module documentation. Note that when logging
 # configuration files are used then all logging configuration is set in the
 # configuration file and other logging configuration options are ignored (for
-# example, log-date-format). (string value)
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
@@ -363,63 +339,27 @@
 # set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is ignored
-# unless log_rotation_type is setto "interval". (integer value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the time when
-# the service was started) is used when scheduling the next rotation. (string
-# value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
-# not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
 # Additional data to append to log message when logging level for the message
-# is DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
 # List of package logging levels in logger=LEVEL pairs. This option is ignored
 # if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
@@ -460,10 +400,156 @@
 # The time-to-live in sec of idle connections in the pool (integer value)
 #conn_pool_ttl = 1200
 
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
+# (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
 # Size of executor thread pool when executor is threading or eventlet. (integer
 # value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
+executor_thread_pool_size = 70
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
@@ -479,12 +565,19 @@
 # oslo_messaging.TransportURL at
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
-#transport_url = rabbit://
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = neutron
-
+#control_exchange = keystone
 #
 # From oslo.service.wsgi
 #
@@ -520,7 +613,6 @@
 
 
 [agent]
-root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf"
 
 #
 # From neutron.agent
@@ -530,7 +622,7 @@
 # /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
 # 'sudo' to skip the filtering and just run the command directly. (string
 # value)
-#root_helper = sudo
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 # Use the root helper when listing the namespaces on a system. This may not be
 # required depending on the security configuration. If the root helper is not
@@ -555,7 +647,7 @@
 # Seconds between nodes reporting state to server; should be less than
 # agent_down_time, best if it is half or less than agent_down_time. (floating
 # point value)
-#report_interval = 30
+report_interval = 30
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
@@ -582,22 +674,13 @@
 # (integer value)
 #check_child_processes_interval = 60
 
-# Location of scripts used to kill external processes. Names of scripts here
-# must follow the pattern: "<process-name>-kill" where <process-name> is name
-# of the process which should be killed using this script. For example, kill
-# script for dnsmasq process should be named "dnsmasq-kill". If path is set to
-# None, then default "kill" command will be used to stop processes. (string
-# value)
-#kill_scripts_path = /etc/neutron/kill_scripts/
-
 # Availability zone of this node (string value)
 #availability_zone = nova
 
 
 [cors]
-
-#
-# From oslo.middleware.cors
+#
+# From oslo.middleware
 #
 
 # Indicate whether this resource may be shared with the domain received in the
@@ -610,7 +693,7 @@
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -620,20 +703,11 @@
 
 # Indicate which header field names may be used during the actual request.
 # (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
 
 
 [database]
-connection = sqlite:////var/lib/neutron/neutron.sqlite
-
-#
-# From neutron.db
-#
-
-# Database engine for which script will be generated when using offline
-# migration. (string value)
-#engine =
-
 #
 # From oslo.db
 #
@@ -651,9 +725,9 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://neutron:opnfv_secret@192.168.10.23/neutron?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
@@ -675,6 +749,7 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
+connection_recycle_time = 300
 
 # DEPRECATED: Minimum number of SQL connections to keep open in a pool.
 # (integer value)
@@ -691,12 +766,14 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -707,6 +784,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 70
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -747,8 +825,8 @@
 #connection_parameters =
 
 
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -763,6 +841,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -778,6 +857,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -815,6 +895,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -828,26 +909,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -886,6 +947,14 @@
 # allowed. Finally the name of a binding method that must be present in tokens.
 # (string value)
 #enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
 
 # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
 # single algorithm or multiple. The algorithms are those supported by Python
@@ -917,20 +986,15 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
-
-
-[nova]
-
-#
-# From neutron
-#
 
 # Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # Type of the nova endpoint to use.  This endpoint will be looked up in the
 # keystone catalog and should be one of public, internal or admin. (string
@@ -940,35 +1004,35 @@
 # admin - <No description provided>
 # internal - <No description provided>
 #endpoint_type = public
-
-#
-# From nova.auth
-#
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
 
 # Authentication type to load (string value)
 # Deprecated group/name - [nova]/auth_plugin
 #auth_type = <None>
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
 #cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
 #default_domain_id = <None>
 
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
 # (string value)
 #default_domain_name = <None>
 
@@ -981,28 +1045,26 @@
 # Verify HTTPS connections. (boolean value)
 #insecure = false
 
-# PEM encoded client certificate key file (string value)
+# Required if identity server requires client certificate (string value)
 #keyfile = <None>
 
 # User's password (string value)
 #password = <None>
+password = opnfv_secret
 
 # Domain ID containing project (string value)
 #project_domain_id = <None>
+project_domain_id = default
 
 # Domain name containing project (string value)
 #project_domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [nova]/tenant_id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [nova]/tenant_name
 #project_name = <None>
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
@@ -1021,20 +1083,174 @@
 
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User id (string value)
+# User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [nova]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
+username = neutron
+
+
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[nova]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:5000
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = nova
 
 
 [oslo_concurrency]
-
 #
 # From oslo.concurrency
 #
@@ -1042,297 +1258,22 @@
 # Enables or disables inter-process locks. (boolean value)
 #disable_process_locking = false
 
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
+# Directory to use for lock files.  For security, the specified
+# directory should only be writable by the user running the processes
+# that need locking. Defaults to environment variable OSLO_LOCK_PATH.
+# If OSLO_LOCK_PATH is not set in the environment, use the Python
+# tempfile.gettempdir function to find a suitable location. If
+# external locks are used, a lock path must be set. (string value)
+#lock_path = /tmp
+lock_path = /var/lock/neutron
+[oslo_messaging_rabbit]
 #
 # From oslo.messaging
 #
 
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
 # Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
@@ -1341,24 +1282,6 @@
 # Connect over SSL. (boolean value)
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
@@ -1381,6 +1304,40 @@
 # shuffle - <No description provided>
 #kombu_failover_strategy = round-robin
 
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
 # The RabbitMQ login method. (string value)
 # Possible values:
 # PLAIN - <No description provided>
@@ -1388,6 +1345,12 @@
 # RABBIT-CR-DEMO - <No description provided>
 #rabbit_login_method = AMQPLAIN
 
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
 
@@ -1398,6 +1361,12 @@
 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
 #rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
 
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
@@ -1427,93 +1396,59 @@
 #heartbeat_rate = 2
 
 
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
+
+
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
 
 
 [oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[privsep]
-# Configuration options for the oslo.privsep daemon. Note that this group name
-# can be changed by the consuming service. Check the service's docs to see if
-# this is the case.
-
-#
-# From oslo.privsep
-#
-
-# User that the privsep daemon should run as. (string value)
-#user = <None>
-
-# Group that the privsep daemon should run as. (string value)
-#group = <None>
-
-# List of Linux capabilities retained by the privsep daemon. (list value)
-#capabilities =
-
-# The number of threads available for privsep to concurrently run processes.
-# Defaults to the number of CPU cores in the system. (integer value)
-# Minimum value: 1
-#thread_pool_size = 4
-
-# Command to invoke to start the privsep daemon if not using the "fork" method.
-# If not specified, a default is generated using "sudo privsep-helper" and
-# arguments designed to recreate the current configuration. This command must
-# accept suitable --privsep_context and --privsep_sock_path arguments. (string
-# value)
-#helper_command = <None>
 
 
 [quotas]
@@ -1568,7 +1503,6 @@
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
@@ -1593,3 +1527,20 @@
 # Sets the list of available ciphers. value should be a string in the OpenSSL
 # cipher list format. (string value)
 #ciphers = <None>
+
+
+[ovs]
+ovsdb_connection = tcp:127.0.0.1:6639
+
+#
+# Advanced services configs
+#
+
+
+
+# BGPVPN config
+
+[service_providers]
+
+
+

2020-01-15 02:42:11,852 [salt.state       :1951][INFO    ][30536] Completed state [/etc/neutron/neutron.conf] at time 02:42:11.851985 duration_in_ms=875.949
2020-01-15 02:42:11,855 [salt.state       :1780][INFO    ][30536] Running state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 02:42:11.855247
2020-01-15 02:42:11,856 [salt.state       :1813][INFO    ][30536] Executing state cmd.run for [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head]
2020-01-15 02:42:11,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command '/bin/true' in directory '/root'
2020-01-15 02:42:11,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command 'neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head' in directory '/root'
2020-01-15 02:42:36,584 [salt.state       :300 ][INFO    ][30536] {'pid': 32603, 'retcode': 0, 'stderr': "INFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> kilo\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 354db87e3225\nINFO  [alembic.runtime.migration] Running upgrade 354db87e3225 -> 599c6a226151\nINFO  [alembic.runtime.migration] Running upgrade 599c6a226151 -> 52c5312f6baf\nINFO  [alembic.runtime.migration] Running upgrade 52c5312f6baf -> 313373c0ffee\nINFO  [alembic.runtime.migration] Running upgrade 313373c0ffee -> 8675309a5c4f\nINFO  [alembic.runtime.migration] Running upgrade 8675309a5c4f -> 45f955889773\nINFO  [alembic.runtime.migration] Running upgrade 45f955889773 -> 26c371498592\nINFO  [alembic.runtime.migration] Running upgrade 26c371498592 -> 1c844d1677f7\nINFO  [alembic.runtime.migration] Running upgrade 1c844d1677f7 -> 1b4c6e320f79\nINFO  [alembic.runtime.migration] Running upgrade 1b4c6e320f79 -> 48153cb5f051\nINFO  [alembic.runtime.migration] Running upgrade 48153cb5f051 -> 9859ac9c136\nINFO  [alembic.runtime.migration] Running upgrade 9859ac9c136 -> 34af2b5c5a59\nINFO  [alembic.runtime.migration] Running upgrade 34af2b5c5a59 -> 59cb5b6cf4d\nINFO  [alembic.runtime.migration] Running upgrade 59cb5b6cf4d -> 13cfb89f881a\nINFO  [alembic.runtime.migration] Running upgrade 13cfb89f881a -> 32e5974ada25\nINFO  [alembic.runtime.migration] Running upgrade 32e5974ada25 -> ec7fcfbf72ee\nINFO  [alembic.runtime.migration] Running upgrade ec7fcfbf72ee -> dce3ec7a25c9\nINFO  [alembic.runtime.migration] Running upgrade dce3ec7a25c9 -> c3a73f615e4\nINFO  [alembic.runtime.migration] Running upgrade c3a73f615e4 -> 659bf3d90664\nINFO  [alembic.runtime.migration] Running upgrade 659bf3d90664 -> 1df244e556f5\nINFO  [alembic.runtime.migration] Running upgrade 1df244e556f5 -> 19f26505c74f\nINFO  [alembic.runtime.migration] Running upgrade 19f26505c74f -> 15be73214821\nINFO  [alembic.runtime.migration] Running upgrade 15be73214821 -> b4caf27aae4\nINFO  [alembic.runtime.migration] Running upgrade b4caf27aae4 -> 15e43b934f81\nINFO  [alembic.runtime.migration] Running upgrade 15e43b934f81 -> 31ed664953e6\nINFO  [alembic.runtime.migration] Running upgrade 31ed664953e6 -> 2f9e956e7532\nINFO  [alembic.runtime.migration] Running upgrade 2f9e956e7532 -> 3894bccad37f\nINFO  [alembic.runtime.migration] Running upgrade 3894bccad37f -> 0e66c5227a8a\nINFO  [alembic.runtime.migration] Running upgrade 0e66c5227a8a -> 45f8dd33480b\nINFO  [alembic.runtime.migration] Running upgrade 45f8dd33480b -> 5abc0278ca73\nINFO  [alembic.runtime.migration] Running upgrade 5abc0278ca73 -> d3435b514502\nINFO  [alembic.runtime.migration] Running upgrade d3435b514502 -> 30107ab6a3ee\nINFO  [alembic.runtime.migration] Running upgrade 30107ab6a3ee -> c415aab1c048\nINFO  [alembic.runtime.migration] Running upgrade c415aab1c048 -> a963b38d82f4\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 30018084ec99\nINFO  [alembic.runtime.migration] Running upgrade 30018084ec99 -> 4ffceebfada\nINFO  [alembic.runtime.migration] Running upgrade 4ffceebfada -> 5498d17be016\nINFO  [alembic.runtime.migration] Running upgrade 5498d17be016 -> 2a16083502f3\nINFO  [alembic.runtime.migration] Running upgrade 2a16083502f3 -> 2e5352a0ad4d\nINFO  [alembic.runtime.migration] Running upgrade 2e5352a0ad4d -> 11926bcfe72d\nINFO  [alembic.runtime.migration] Running upgrade 11926bcfe72d -> 4af11ca47297\nINFO  [alembic.runtime.migration] Running upgrade 4af11ca47297 -> 1b294093239c\nINFO  [alembic.runtime.migration] Running upgrade 1b294093239c -> 8a6d8bdae39\nINFO  [alembic.runtime.migration] Running upgrade 8a6d8bdae39 -> 2b4c2465d44b\nINFO  [alembic.runtime.migration] Running upgrade 2b4c2465d44b -> e3278ee65050\nINFO  [alembic.runtime.migration] Running upgrade e3278ee65050 -> c6c112992c9\nINFO  [alembic.runtime.migration] Running upgrade c6c112992c9 -> 5ffceebfada\nINFO  [alembic.runtime.migration] Running upgrade 5ffceebfada -> 4ffceebfcdc\nINFO  [alembic.runtime.migration] Running upgrade 4ffceebfcdc -> 7bbb25278f53\nINFO  [alembic.runtime.migration] Running upgrade 7bbb25278f53 -> 89ab9a816d70\nINFO  [alembic.runtime.migration] Running upgrade 89ab9a816d70 -> c879c5e1ee90\nINFO  [alembic.runtime.migration] Running upgrade c879c5e1ee90 -> 8fd3918ef6f4\nINFO  [alembic.runtime.migration] Running upgrade 8fd3918ef6f4 -> 4bcd4df1f426\nINFO  [alembic.runtime.migration] Running upgrade 4bcd4df1f426 -> b67e765a3524\nINFO  [alembic.runtime.migration] Running upgrade a963b38d82f4 -> 3d0e74aa7d37\nINFO  [alembic.runtime.migration] Running upgrade 3d0e74aa7d37 -> 030a959ceafa\nINFO  [alembic.runtime.migration] Running upgrade 030a959ceafa -> a5648cfeeadf\nINFO  [alembic.runtime.migration] Running upgrade a5648cfeeadf -> 0f5bef0f87d4\nINFO  [alembic.runtime.migration] Running upgrade 0f5bef0f87d4 -> 67daae611b6e\nINFO  [alembic.runtime.migration] Running upgrade 67daae611b6e -> 6b461a21bcfc\nINFO  [alembic.runtime.migration] Running upgrade 6b461a21bcfc -> 5cd92597d11d\nINFO  [alembic.runtime.migration] Running upgrade 5cd92597d11d -> 929c968efe70\nINFO  [alembic.runtime.migration] Running upgrade 929c968efe70 -> a9c43481023c\nINFO  [alembic.runtime.migration] Running upgrade a9c43481023c -> 804a3c76314c\nINFO  [alembic.runtime.migration] Running upgrade 804a3c76314c -> 2b42d90729da\nINFO  [alembic.runtime.migration] Running upgrade 2b42d90729da -> 62c781cb6192\nINFO  [alembic.runtime.migration] Running upgrade 62c781cb6192 -> c8c222d42aa9\nINFO  [alembic.runtime.migration] Running upgrade c8c222d42aa9 -> 349b6fd605a6\nINFO  [alembic.runtime.migration] Running upgrade 349b6fd605a6 -> 7d32f979895f\nINFO  [alembic.runtime.migration] Running upgrade 7d32f979895f -> 594422d373ee\nINFO  [alembic.runtime.migration] Running upgrade 594422d373ee -> 61663558142c\nINFO  [alembic.runtime.migration] Running upgrade 61663558142c -> 867d39095bf4, port forwarding\nINFO  [alembic.runtime.migration] Running upgrade 867d39095bf4 -> d72db3e25539, modify uniq port forwarding\nINFO  [alembic.runtime.migration] Running upgrade d72db3e25539 -> cada2437bf41\nINFO  [alembic.runtime.migration] Running upgrade cada2437bf41 -> 195176fb410d, router gateway IP QoS\nINFO  [alembic.runtime.migration] Running upgrade 195176fb410d -> fb0167bd9639\nINFO  [alembic.runtime.migration] Running upgrade fb0167bd9639 -> 0ff9e3881597\nINFO  [alembic.runtime.migration] Running upgrade 0ff9e3881597 -> 9bfad3f1e780\nINFO  [alembic.runtime.migration] Running upgrade b67e765a3524 -> a84ccf28f06a\nINFO  [alembic.runtime.migration] Running upgrade a84ccf28f06a -> 7d9d8eeec6ad\nINFO  [alembic.runtime.migration] Running upgrade 7d9d8eeec6ad -> a8b517cff8ab\nINFO  [alembic.runtime.migration] Running upgrade a8b517cff8ab -> 3b935b28e7a0\nINFO  [alembic.runtime.migration] Running upgrade 3b935b28e7a0 -> b12a3ef66e62\nINFO  [alembic.runtime.migration] Running upgrade b12a3ef66e62 -> 97c25b0d2353\nINFO  [alembic.runtime.migration] Running upgrade 97c25b0d2353 -> 2e0d7a8a1586\nINFO  [alembic.runtime.migration] Running upgrade 2e0d7a8a1586 -> 5c85685d616d\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> start_networking_bgpvpn, start networking_bgpvpn chain\nRevision ID: start_networking_bgpvpn\nRevises: None\nCreate Date: 2015-10-01 18:04:17.265514\nINFO  [alembic.runtime.migration] Running upgrade start_networking_bgpvpn -> 17d9fd4fddee, expand initial\nRevision ID: 17d9fd4fddee\nRevises: start_networking_bgpvpn\nCreate Date: 2015-10-01 17:35:11.000000\nINFO  [alembic.runtime.migration] Running upgrade 17d9fd4fddee -> 3600132c6147, Add router association table\nINFO  [alembic.runtime.migration] Running upgrade 3600132c6147 -> 0ab4049986b8, add indexes to tenant_id\nINFO  [alembic.runtime.migration] Running upgrade 0ab4049986b8 -> 9a6664f3b8d4, Add tables for port associations\nINFO  [alembic.runtime.migration] Running upgrade 9a6664f3b8d4 -> 39411aacf9b8, add vni to bgpvpn table\nINFO  [alembic.runtime.migration] Running upgrade 39411aacf9b8 -> 4610803bdf0d, Add 'extra-routes' to router association table\nINFO  [alembic.runtime.migration] Running upgrade 4610803bdf0d -> 666c706fea3b, Add local_pref to bgpvpns table\nINFO  [alembic.runtime.migration] Running upgrade 666c706fea3b -> 7a9482036ecd, Add standard attributes\nINFO  [alembic.runtime.migration] Running upgrade start_networking_bgpvpn -> 180baa4183e0, contract initial\nRevision ID: 180baa4183e0\nRevises: start_networking_bgpvpn\nCreate Date: 2015-10-01 17:35:11.000000\nINFO  [alembic.runtime.migration] Running upgrade 180baa4183e0 -> 23ce05e0a19f, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade 23ce05e0a19f -> 9d7f1ae5fa56, Add standard FK and constraints, and defs for existing objects\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> start_networking_l2gw, start networking-l2gw chain\nINFO  [alembic.runtime.migration] Running upgrade start_networking_l2gw -> 54c9c8fe22bf, DB_Models_for_OVSDB_Hardware_VTEP_Schema\nINFO  [alembic.runtime.migration] Running upgrade 54c9c8fe22bf -> 42438454c556, l2gateway_models\nINFO  [alembic.runtime.migration] Running upgrade 42438454c556 -> kilo, kilo\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 60019185aa99, Initial no-op Liberty expand rule.\nINFO  [alembic.runtime.migration] Running upgrade 60019185aa99 -> 49ce408ac349, add indexes to tenant_id\nINFO  [alembic.runtime.migration] Running upgrade 49ce408ac349 -> 8d7d772eafcf, add standard_attribute_id for l2gw\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 79919185aa99, Initial no-op Liberty contract rule.\nINFO  [alembic.runtime.migration] Running upgrade 79919185aa99 -> 2f533f7705dd, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade 2f533f7705dd -> 0fb45e525aa9, add standard_attribute_id for l2gw\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> b89a299e19f9, Initial odl db, branchpoint\nINFO  [alembic.runtime.migration] Running upgrade b89a299e19f9 -> 247501328046, Start of odl expand branch\nINFO  [alembic.runtime.migration] Running upgrade 247501328046 -> 37e242787ae5, OpenDaylight Neutron mechanism driver refactor\nINFO  [alembic.runtime.migration] Running upgrade 37e242787ae5 -> 703dbf02afde, Add journal maintenance table\nINFO  [alembic.runtime.migration] Running upgrade 703dbf02afde -> 3d560427d776, add sequence number to journal\nINFO  [alembic.runtime.migration] Running upgrade b89a299e19f9 -> 383acb0d38a0, Start of odl contract branch\nINFO  [alembic.runtime.migration] Running upgrade 383acb0d38a0 -> fa0c536252a5, update opendayligut journal\nINFO  [alembic.runtime.migration] Running upgrade fa0c536252a5 -> eccd865b7d3a, drop opendaylight_maintenance table\nINFO  [alembic.runtime.migration] Running upgrade eccd865b7d3a -> 7cbef5a56298, Drop created_at column\nINFO  [alembic.runtime.migration] Running upgrade 3d560427d776 -> 43af357fd638, Added version_id for optimistic locking\nINFO  [alembic.runtime.migration] Running upgrade 43af357fd638 -> 0472f56ff2fb, Add journal dependencies table\nINFO  [alembic.runtime.migration] Running upgrade 0472f56ff2fb -> 6f7dfb241354, create opendaylight_preiodic_task table\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> start_networking_sfc, start networking-sfc chain\nINFO  [alembic.runtime.migration] Running upgrade start_networking_sfc -> 24fc7241aa5, Initial Mitaka no-op script.\nINFO  [alembic.runtime.migration] Running upgrade 24fc7241aa5 -> 9768e6a66c9, Defining flow-classifier data-model\nINFO  [alembic.runtime.migration] Running upgrade 9768e6a66c9 -> c3e178d4a985, Defining Port Chain data-model.\nINFO  [alembic.runtime.migration] Running upgrade c3e178d4a985 -> 5a475fc853e6, Defining OVS data-model\nINFO  [alembic.runtime.migration] Running upgrade 5a475fc853e6 -> d1002a1f97f6, update flow classifier\nINFO  [alembic.runtime.migration] Running upgrade d1002a1f97f6 -> fa75d46a7f11, add_port_pair_group_params\nINFO  [alembic.runtime.migration] Running upgrade fa75d46a7f11 -> b3adaf631bab, _add_fwd_path_and_in_mac_column\nINFO  [alembic.runtime.migration] Running upgrade b3adaf631bab -> 6185f1633a3d, description of revision\nINFO  [alembic.runtime.migration] Running upgrade 6185f1633a3d -> 61832141fb82, add_ppg_n_tuple_mapping_column\nINFO  [alembic.runtime.migration] Running upgrade 61832141fb82 -> 8329e9be2d8a, modify_value_column_size_in_port_pair_group_params\nINFO  [alembic.runtime.migration] Running upgrade 8329e9be2d8a -> 53ed5bec6cff, Add Service Graph API resource\nINFO  [alembic.runtime.migration] Running upgrade 53ed5bec6cff -> d6fb381b65f2\nINFO  [alembic.runtime.migration] Running upgrade d6fb381b65f2 -> a3ad63aa834f, extra attributes for pathnode\nINFO  [alembic.runtime.migration] Running upgrade start_networking_sfc -> 48072cb59133, Initial Mitaka no-op script.\nINFO  [alembic.runtime.migration] Running upgrade 48072cb59133 -> 010308b06b49, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade 010308b06b49 -> 06382790fb2c, fix foreign constraints\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Context impl MySQLImpl.\nINFO  [alembic.runtime.migration] Will assume non-transactional DDL.\nINFO  [alembic.runtime.migration] Running upgrade  -> start_neutron_lbaas, start neutron-lbaas chain\nINFO  [alembic.runtime.migration] Running upgrade start_neutron_lbaas -> lbaasv2, lbaas version 2 api\nINFO  [alembic.runtime.migration] Running upgrade lbaasv2 -> 4deef6d81931, add provisioning and operating statuses\nINFO  [alembic.runtime.migration] Running upgrade 4deef6d81931 -> 4b6d8d5310b8, add_index_tenant_id\nINFO  [alembic.runtime.migration] Running upgrade 4b6d8d5310b8 -> 364f9b6064f0, agentv2\nINFO  [alembic.runtime.migration] Running upgrade 364f9b6064f0 -> lbaasv2_tls, lbaasv2 TLS\nINFO  [alembic.runtime.migration] Running upgrade lbaasv2_tls -> 4ba00375f715, edge_driver\nINFO  [alembic.runtime.migration] Running upgrade 4ba00375f715 -> kilo, kilo\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 3345facd0452, Initial Liberty no-op expand script.\nINFO  [alembic.runtime.migration] Running upgrade 3345facd0452 -> 4a408dd491c2, Addition of Name column to lbaas_members and lbaas_healthmonitors table\nINFO  [alembic.runtime.migration] Running upgrade 4a408dd491c2 -> 3426acbc12de, Add flavor id\nINFO  [alembic.runtime.migration] Running upgrade 3426acbc12de -> 6aee0434f911, independent pools\nINFO  [alembic.runtime.migration] Running upgrade 6aee0434f911 -> 3543deab1547, add_l7_tables\nINFO  [alembic.runtime.migration] Running upgrade 3543deab1547 -> 62deca5010cd, Add tenant-id index for L7 tables\nINFO  [alembic.runtime.migration] Running upgrade kilo -> 130ebfdef43, Initial Liberty no-op contract revision.\nINFO  [alembic.runtime.migration] Running upgrade 130ebfdef43 -> 4b4dc6d5d843, rename tenant to project\nINFO  [alembic.runtime.migration] Running upgrade 4b4dc6d5d843 -> e6417a8b114d, Drop v1 tables\nINFO  [alembic.runtime.migration] Running upgrade 62deca5010cd -> 844352f9fe6f, Add healthmonitor max retries down", 'stdout': 'Running upgrade for neutron ...\nOK\nRunning upgrade for networking-bgpvpn ...\nOK\nRunning upgrade for networking-l2gw ...\nOK\nRunning upgrade for networking-odl ...\nOK\nRunning upgrade for networking-sfc ...\nOK\nRunning upgrade for neutron-lbaas ...\nOK'}
2020-01-15 02:42:36,586 [salt.state       :1951][INFO    ][30536] Completed state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 02:42:36.586188 duration_in_ms=24730.94
2020-01-15 02:42:36,588 [salt.state       :1780][INFO    ][30536] Running state [neutron-db-manage --subproject networking-midonet upgrade head] at time 02:42:36.588017
2020-01-15 02:42:36,588 [salt.state       :1813][INFO    ][30536] Executing state cmd.run for [neutron-db-manage --subproject networking-midonet upgrade head]
2020-01-15 02:42:36,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command '/bin/false' in directory '/root'
2020-01-15 02:42:36,629 [salt.state       :300 ][INFO    ][30536] onlyif execution failed
2020-01-15 02:42:36,630 [salt.state       :1951][INFO    ][30536] Completed state [neutron-db-manage --subproject networking-midonet upgrade head] at time 02:42:36.630478 duration_in_ms=42.46
2020-01-15 02:42:36,631 [salt.state       :1780][INFO    ][30536] Running state [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head] at time 02:42:36.631670
2020-01-15 02:42:36,632 [salt.state       :1813][INFO    ][30536] Executing state cmd.run for [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head]
2020-01-15 02:42:36,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command '/bin/false' in directory '/root'
2020-01-15 02:42:36,668 [salt.state       :300 ][INFO    ][30536] onlyif execution failed
2020-01-15 02:42:36,669 [salt.state       :1951][INFO    ][30536] Completed state [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head] at time 02:42:36.669343 duration_in_ms=37.672
2020-01-15 02:42:36,671 [salt.state       :1780][INFO    ][30536] Running state [/usr/sbin/policy-rc.d] at time 02:42:36.671576
2020-01-15 02:42:36,672 [salt.state       :1813][INFO    ][30536] Executing state file.absent for [/usr/sbin/policy-rc.d]
2020-01-15 02:42:36,674 [salt.state       :300 ][INFO    ][30536] {'removed': '/usr/sbin/policy-rc.d'}
2020-01-15 02:42:36,675 [salt.state       :1951][INFO    ][30536] Completed state [/usr/sbin/policy-rc.d] at time 02:42:36.675594 duration_in_ms=4.018
2020-01-15 02:42:36,677 [salt.state       :1780][INFO    ][30536] Running state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 02:42:36.677669
2020-01-15 02:42:36,678 [salt.state       :1813][INFO    ][30536] Executing state cmd.run for [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini]
2020-01-15 02:42:36,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command 'test -e /etc/neutron/plugin.ini' in directory '/root'
2020-01-15 02:42:36,715 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command 'ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini' in directory '/root'
2020-01-15 02:42:36,751 [salt.state       :300 ][INFO    ][30536] {'pid': 32614, 'retcode': 0, 'stderr': '', 'stdout': ''}
2020-01-15 02:42:36,753 [salt.state       :1951][INFO    ][30536] Completed state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 02:42:36.752777 duration_in_ms=75.108
2020-01-15 02:42:36,755 [salt.state       :1780][INFO    ][30536] Running state [/etc/neutron/api-paste.ini] at time 02:42:36.754945
2020-01-15 02:42:36,756 [salt.state       :1813][INFO    ][30536] Executing state file.managed for [/etc/neutron/api-paste.ini]
2020-01-15 02:42:36,799 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/files/stein/api-paste.ini'
2020-01-15 02:42:37,049 [salt.state       :300 ][INFO    ][30536] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [composite:neutron]
 use = egg:Paste#urlmap
 /: neutronversions_composite
@@ -5,8 +6,8 @@
 
 [composite:neutronapi_v2_0]
 use = call:neutron.auth:pipeline_factory
-noauth = cors http_proxy_to_wsgi request_id catch_errors osprofiler extensions neutronapiapp_v2_0
-keystone = cors http_proxy_to_wsgi request_id catch_errors osprofiler authtoken keystonecontext extensions neutronapiapp_v2_0
+noauth = cors http_proxy_to_wsgi request_id catch_errors extensions neutronapiapp_v2_0
+keystone = cors http_proxy_to_wsgi request_id catch_errors authtoken keystonecontext extensions neutronapiapp_v2_0
 
 [composite:neutronversions_composite]
 use = call:neutron.auth:pipeline_factory

2020-01-15 02:42:37,049 [salt.state       :1951][INFO    ][30536] Completed state [/etc/neutron/api-paste.ini] at time 02:42:37.049606 duration_in_ms=294.662
2020-01-15 02:42:37,050 [salt.state       :1780][INFO    ][30536] Running state [/etc/default/neutron-server] at time 02:42:37.050102
2020-01-15 02:42:37,050 [salt.state       :1813][INFO    ][30536] Executing state file.managed for [/etc/default/neutron-server]
2020-01-15 02:42:37,078 [salt.fileclient  :1219][INFO    ][30536] Fetching file from saltenv 'base', ** done ** 'neutron/files/stein/neutron-server'
2020-01-15 02:42:37,192 [salt.state       :300 ][INFO    ][30536] File changed:
--- 
+++ 
@@ -1,5 +1,8 @@
+# Generated by Salt.
+
 # defaults for neutron-server
 
 # path to config file corresponding to the core_plugin specified in
 # neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
 NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"

2020-01-15 02:42:37,192 [salt.state       :1951][INFO    ][30536] Completed state [/etc/default/neutron-server] at time 02:42:37.192397 duration_in_ms=142.295
2020-01-15 02:42:37,195 [salt.state       :1780][INFO    ][30536] Running state [neutron-server] at time 02:42:37.195040
2020-01-15 02:42:37,195 [salt.state       :1813][INFO    ][30536] Executing state service.running for [neutron-server]
2020-01-15 02:42:37,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemctl', 'status', 'neutron-server.service', '-n', '0'] in directory '/root'
2020-01-15 02:42:37,241 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2020-01-15 02:42:37,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2020-01-15 02:42:37,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'neutron-server.service'] in directory '/root'
2020-01-15 02:42:37,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2020-01-15 02:42:37,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2020-01-15 02:42:37,506 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30536] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2020-01-15 02:42:37,551 [salt.state       :300 ][INFO    ][30536] {'neutron-server': True}
2020-01-15 02:42:37,552 [salt.state       :1951][INFO    ][30536] Completed state [neutron-server] at time 02:42:37.552698 duration_in_ms=357.655
2020-01-15 02:42:37,560 [salt.minion      :1711][INFO    ][30536] Returning information for job: 20200115024054397830
2020-01-15 02:45:33,084 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls with jid 20200115024533075733
2020-01-15 02:45:33,129 [salt.minion      :1432][INFO    ][32681] Starting a new job with PID 32681
2020-01-15 02:45:40,303 [salt.state       :915 ][INFO    ][32681] Loading fresh modules for state activity
2020-01-15 02:45:40,365 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/init.sls'
2020-01-15 02:45:40,404 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/server.sls'
2020-01-15 02:45:41,436 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/_ssl/mysql.sls'
2020-01-15 02:45:41,503 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/_ssl/rabbitmq.sls'
2020-01-15 02:45:41,575 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/_ssl/plugin/init.sls'
2020-01-15 02:45:41,628 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/db/offline_sync.sls'
2020-01-15 02:45:42,184 [keyring.backend  :170 ][INFO    ][32681] Loading Windows (alt)
2020-01-15 02:45:42,215 [keyring.backend  :170 ][INFO    ][32681] Loading pyfs
2020-01-15 02:45:42,219 [keyring.backend  :170 ][INFO    ][32681] Loading multi
2020-01-15 02:45:42,220 [keyring.backend  :170 ][INFO    ][32681] Loading Google
2020-01-15 02:45:42,223 [keyring.backend  :170 ][INFO    ][32681] Loading Gnome
2020-01-15 02:45:42,238 [keyring.backend  :170 ][INFO    ][32681] Loading keyczar
2020-01-15 02:45:42,238 [keyring.backend  :170 ][INFO    ][32681] Loading file
2020-01-15 02:45:43,377 [salt.state       :1780][INFO    ][32681] Running state [apache2] at time 02:45:43.377320
2020-01-15 02:45:43,379 [salt.state       :1813][INFO    ][32681] Executing state pkg.installed for [apache2]
2020-01-15 02:45:43,380 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:45:44,704 [salt.state       :300 ][INFO    ][32681] All specified packages are already installed
2020-01-15 02:45:44,707 [salt.state       :1951][INFO    ][32681] Completed state [apache2] at time 02:45:44.707138 duration_in_ms=1329.816
2020-01-15 02:45:44,708 [salt.state       :1780][INFO    ][32681] Running state [openssl] at time 02:45:44.708125
2020-01-15 02:45:44,709 [salt.state       :1813][INFO    ][32681] Executing state pkg.installed for [openssl]
2020-01-15 02:45:44,732 [salt.state       :300 ][INFO    ][32681] All specified packages are already installed
2020-01-15 02:45:44,732 [salt.state       :1951][INFO    ][32681] Completed state [openssl] at time 02:45:44.732605 duration_in_ms=24.48
2020-01-15 02:45:44,734 [salt.state       :1780][INFO    ][32681] Running state [a2enmod ssl] at time 02:45:44.734590
2020-01-15 02:45:44,735 [salt.state       :1813][INFO    ][32681] Executing state cmd.run for [a2enmod ssl]
2020-01-15 02:45:44,736 [salt.state       :300 ][INFO    ][32681] /etc/apache2/mods-enabled/ssl.load exists
2020-01-15 02:45:44,736 [salt.state       :1951][INFO    ][32681] Completed state [a2enmod ssl] at time 02:45:44.736737 duration_in_ms=2.148
2020-01-15 02:45:44,738 [salt.state       :1780][INFO    ][32681] Running state [a2enmod rewrite] at time 02:45:44.737969
2020-01-15 02:45:44,738 [salt.state       :1813][INFO    ][32681] Executing state cmd.run for [a2enmod rewrite]
2020-01-15 02:45:44,739 [salt.state       :300 ][INFO    ][32681] /etc/apache2/mods-enabled/rewrite.load exists
2020-01-15 02:45:44,740 [salt.state       :1951][INFO    ][32681] Completed state [a2enmod rewrite] at time 02:45:44.740174 duration_in_ms=2.206
2020-01-15 02:45:44,741 [salt.state       :1780][INFO    ][32681] Running state [libapache2-mod-wsgi-py3] at time 02:45:44.741422
2020-01-15 02:45:44,742 [salt.state       :1813][INFO    ][32681] Executing state pkg.installed for [libapache2-mod-wsgi-py3]
2020-01-15 02:45:44,763 [salt.state       :300 ][INFO    ][32681] All specified packages are already installed
2020-01-15 02:45:44,764 [salt.state       :1951][INFO    ][32681] Completed state [libapache2-mod-wsgi-py3] at time 02:45:44.764458 duration_in_ms=23.036
2020-01-15 02:45:44,765 [salt.state       :1780][INFO    ][32681] Running state [a2enmod wsgi] at time 02:45:44.765668
2020-01-15 02:45:44,766 [salt.state       :1813][INFO    ][32681] Executing state cmd.run for [a2enmod wsgi]
2020-01-15 02:45:44,767 [salt.state       :300 ][INFO    ][32681] /etc/apache2/mods-enabled/wsgi.load exists
2020-01-15 02:45:44,767 [salt.state       :1951][INFO    ][32681] Completed state [a2enmod wsgi] at time 02:45:44.767625 duration_in_ms=1.957
2020-01-15 02:45:44,779 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:45:44.779274
2020-01-15 02:45:44,780 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2020-01-15 02:45:44,781 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2020-01-15 02:45:44,781 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 02:45:44.781710 duration_in_ms=2.44
2020-01-15 02:45:44,782 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:45:44.782769
2020-01-15 02:45:44,783 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2020-01-15 02:45:44,784 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2020-01-15 02:45:44,785 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 02:45:44.784889 duration_in_ms=2.12
2020-01-15 02:45:44,785 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:45:44.785547
2020-01-15 02:45:44,786 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2020-01-15 02:45:44,787 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2020-01-15 02:45:44,787 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 02:45:44.787567 duration_in_ms=2.02
2020-01-15 02:45:44,788 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:45:44.788191
2020-01-15 02:45:44,794 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2020-01-15 02:45:44,794 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2020-01-15 02:45:44,795 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 02:45:44.795421 duration_in_ms=7.229
2020-01-15 02:45:44,801 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 02:45:44.801363
2020-01-15 02:45:44,802 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2020-01-15 02:45:44,970 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2020-01-15 02:45:44,971 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 02:45:44.971385 duration_in_ms=170.02
2020-01-15 02:45:44,974 [salt.state       :1780][INFO    ][32681] Running state [a2enmod mpm_event] at time 02:45:44.974020
2020-01-15 02:45:44,974 [salt.state       :1813][INFO    ][32681] Executing state cmd.run for [a2enmod mpm_event]
2020-01-15 02:45:44,975 [salt.state       :300 ][INFO    ][32681] /etc/apache2/mods-enabled/mpm_event.load exists
2020-01-15 02:45:44,976 [salt.state       :1951][INFO    ][32681] Completed state [a2enmod mpm_event] at time 02:45:44.976191 duration_in_ms=2.171
2020-01-15 02:45:44,978 [salt.state       :1780][INFO    ][32681] Running state [apache_server_service_task] at time 02:45:44.978853
2020-01-15 02:45:44,979 [salt.state       :1813][INFO    ][32681] Executing state test.show_notification for [apache_server_service_task]
2020-01-15 02:45:44,980 [salt.state       :300 ][INFO    ][32681] Running apache.server.service
2020-01-15 02:45:44,980 [salt.state       :1951][INFO    ][32681] Completed state [apache_server_service_task] at time 02:45:44.980713 duration_in_ms=1.86
2020-01-15 02:45:44,982 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/ports.conf] at time 02:45:44.982031
2020-01-15 02:45:44,982 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/etc/apache2/ports.conf]
2020-01-15 02:45:45,120 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/ports.conf is in the correct state
2020-01-15 02:45:45,121 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/ports.conf] at time 02:45:45.121646 duration_in_ms=139.614
2020-01-15 02:45:45,123 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/conf-available/security.conf] at time 02:45:45.123164
2020-01-15 02:45:45,123 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2020-01-15 02:45:45,266 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/conf-available/security.conf is in the correct state
2020-01-15 02:45:45,267 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/conf-available/security.conf] at time 02:45:45.267243 duration_in_ms=144.078
2020-01-15 02:45:45,287 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 02:45:45.287290
2020-01-15 02:45:45,287 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2020-01-15 02:45:45,288 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/sites-enabled/000-default.conf is not present
2020-01-15 02:45:45,288 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 02:45:45.288265 duration_in_ms=0.975
2020-01-15 02:45:45,288 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:45:45.288877
2020-01-15 02:45:45,289 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2020-01-15 02:45:45,577 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2020-01-15 02:45:45,578 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:45:45.578351 duration_in_ms=289.473
2020-01-15 02:45:45,581 [salt.state       :1780][INFO    ][32681] Running state [/usr/sbin/policy-rc.d] at time 02:45:45.581895
2020-01-15 02:45:45,582 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/usr/sbin/policy-rc.d]
2020-01-15 02:45:45,585 [salt.state       :300 ][INFO    ][32681] File changed:
New file
2020-01-15 02:45:45,585 [salt.state       :1951][INFO    ][32681] Completed state [/usr/sbin/policy-rc.d] at time 02:45:45.585561 duration_in_ms=3.666
2020-01-15 02:45:45,586 [salt.state       :1780][INFO    ][32681] Running state [barbican-api] at time 02:45:45.586290
2020-01-15 02:45:45,586 [salt.state       :1813][INFO    ][32681] Executing state pkg.installed for [barbican-api]
2020-01-15 02:45:45,620 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['apt-cache', '-q', 'policy', 'barbican-api'] in directory '/root'
2020-01-15 02:45:46,264 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2020-01-15 02:45:48,166 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115024548152732
2020-01-15 02:45:48,199 [salt.minion      :1432][INFO    ][660] Starting a new job with PID 660
2020-01-15 02:45:48,243 [salt.minion      :1711][INFO    ][660] Returning information for job: 20200115024548152732
2020-01-15 02:45:51,014 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:45:51,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-api'] in directory '/root'
2020-01-15 02:45:58,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:45:58,940 [salt.state       :300 ][INFO    ][32681] Made the following changes:
'python3-barbican' changed from 'absent' to '1:8.0.0-0ubuntu1~cloud0'
'barbican-api' changed from 'absent' to '1:8.0.0-0ubuntu1~cloud0'
'barbican-common' changed from 'absent' to '1:8.0.0-0ubuntu1~cloud0'

2020-01-15 02:45:59,007 [salt.state       :915 ][INFO    ][32681] Loading fresh modules for state activity
2020-01-15 02:45:59,067 [salt.state       :1951][INFO    ][32681] Completed state [barbican-api] at time 02:45:59.067835 duration_in_ms=13481.544
2020-01-15 02:45:59,075 [salt.state       :1780][INFO    ][32681] Running state [barbican-keystone-listener] at time 02:45:59.075829
2020-01-15 02:45:59,076 [salt.state       :1813][INFO    ][32681] Executing state pkg.installed for [barbican-keystone-listener]
2020-01-15 02:46:00,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:46:00,209 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-keystone-listener'] in directory '/root'
2020-01-15 02:46:07,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:46:07,187 [salt.state       :300 ][INFO    ][32681] Made the following changes:
'barbican-keystone-listener' changed from 'absent' to '1:8.0.0-0ubuntu1~cloud0'

2020-01-15 02:46:07,262 [salt.state       :915 ][INFO    ][32681] Loading fresh modules for state activity
2020-01-15 02:46:07,432 [salt.state       :1951][INFO    ][32681] Completed state [barbican-keystone-listener] at time 02:46:07.431921 duration_in_ms=8356.09
2020-01-15 02:46:07,439 [salt.state       :1780][INFO    ][32681] Running state [barbican-worker] at time 02:46:07.439291
2020-01-15 02:46:07,439 [salt.state       :1813][INFO    ][32681] Executing state pkg.installed for [barbican-worker]
2020-01-15 02:46:08,720 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2020-01-15 02:46:08,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-worker'] in directory '/root'
2020-01-15 02:46:15,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 02:46:15,907 [salt.state       :300 ][INFO    ][32681] Made the following changes:
'barbican-worker' changed from 'absent' to '1:8.0.0-0ubuntu1~cloud0'

2020-01-15 02:46:15,987 [salt.state       :915 ][INFO    ][32681] Loading fresh modules for state activity
2020-01-15 02:46:16,102 [salt.state       :1951][INFO    ][32681] Completed state [barbican-worker] at time 02:46:16.101807 duration_in_ms=8662.512
2020-01-15 02:46:16,121 [salt.state       :1780][INFO    ][32681] Running state [python-memcache] at time 02:46:16.121126
2020-01-15 02:46:16,122 [salt.state       :1813][INFO    ][32681] Executing state pkg.installed for [python-memcache]
2020-01-15 02:46:17,208 [salt.state       :300 ][INFO    ][32681] All specified packages are already installed
2020-01-15 02:46:17,208 [salt.state       :1951][INFO    ][32681] Completed state [python-memcache] at time 02:46:17.208678 duration_in_ms=1087.553
2020-01-15 02:46:17,211 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-available/barbican-api.conf] at time 02:46:17.211322
2020-01-15 02:46:17,211 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/sites-available/barbican-api.conf]
2020-01-15 02:46:17,212 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/sites-available/barbican-api.conf is not present
2020-01-15 02:46:17,212 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-available/barbican-api.conf] at time 02:46:17.212453 duration_in_ms=1.131
2020-01-15 02:46:17,212 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-enabled/barbican-api.conf] at time 02:46:17.212744
2020-01-15 02:46:17,213 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/sites-enabled/barbican-api.conf]
2020-01-15 02:46:17,213 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/sites-enabled/barbican-api.conf is not present
2020-01-15 02:46:17,213 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-enabled/barbican-api.conf] at time 02:46:17.213599 duration_in_ms=0.855
2020-01-15 02:46:17,213 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/conf-enabled/barbican-api.conf] at time 02:46:17.213881
2020-01-15 02:46:17,214 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/conf-enabled/barbican-api.conf]
2020-01-15 02:46:17,214 [salt.state       :300 ][INFO    ][32681] {'removed': '/etc/apache2/conf-enabled/barbican-api.conf'}
2020-01-15 02:46:17,214 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/conf-enabled/barbican-api.conf] at time 02:46:17.214839 duration_in_ms=0.959
2020-01-15 02:46:17,219 [salt.state       :1780][INFO    ][32681] Running state [barbican_ssl_mysql] at time 02:46:17.219871
2020-01-15 02:46:17,220 [salt.state       :1813][INFO    ][32681] Executing state test.show_notification for [barbican_ssl_mysql]
2020-01-15 02:46:17,220 [salt.state       :300 ][INFO    ][32681] Running barbican._ssl.mysql
2020-01-15 02:46:17,220 [salt.state       :1951][INFO    ][32681] Completed state [barbican_ssl_mysql] at time 02:46:17.220765 duration_in_ms=0.894
2020-01-15 02:46:17,221 [salt.state       :1780][INFO    ][32681] Running state [barbican_ssl_rabbitmq] at time 02:46:17.221264
2020-01-15 02:46:17,221 [salt.state       :1813][INFO    ][32681] Executing state test.show_notification for [barbican_ssl_rabbitmq]
2020-01-15 02:46:17,221 [salt.state       :300 ][INFO    ][32681] Running barbican._ssl.rabbitmq
2020-01-15 02:46:17,222 [salt.state       :1951][INFO    ][32681] Completed state [barbican_ssl_rabbitmq] at time 02:46:17.222065 duration_in_ms=0.801
2020-01-15 02:46:17,222 [salt.state       :1780][INFO    ][32681] Running state [barbican_plugin_ssl] at time 02:46:17.222322
2020-01-15 02:46:17,222 [salt.state       :1813][INFO    ][32681] Executing state test.show_notification for [barbican_plugin_ssl]
2020-01-15 02:46:17,222 [salt.state       :300 ][INFO    ][32681] Running barbican._ssl.plugin
2020-01-15 02:46:17,223 [salt.state       :1951][INFO    ][32681] Completed state [barbican_plugin_ssl] at time 02:46:17.223112 duration_in_ms=0.791
2020-01-15 02:46:17,224 [salt.state       :1780][INFO    ][32681] Running state [/etc/barbican/barbican.conf] at time 02:46:17.224134
2020-01-15 02:46:17,224 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/etc/barbican/barbican.conf]
2020-01-15 02:46:17,254 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/files/stein/barbican.conf.Debian'
2020-01-15 02:46:17,479 [salt.fileclient  :1219][INFO    ][32681] Fetching file from saltenv 'base', ** done ** 'barbican/files/stein/plugin/_simple_crypto.conf'
2020-01-15 02:46:17,720 [salt.state       :300 ][INFO    ][32681] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -15,10 +17,10 @@
 
 # Maximum allowed http request size against the barbican-api. (integer
 # value)
-#max_allowed_request_size_in_bytes = 15000
+max_allowed_request_size_in_bytes = 1000000
 
 # Maximum allowed secret size in bytes. (integer value)
-#max_allowed_secret_in_bytes = 10000
+max_allowed_secret_in_bytes = 10000
 
 # Host name, for use in HATEOAS-style references Note: Typically this
 # would be the load balanced endpoint that clients would use to
@@ -27,6 +29,7 @@
 # to override default config value which is 'http://localhost:9311'
 # (string value)
 #host_href = http://localhost:9311
+host_href = http://192.168.10.35:9311
 
 # SQLAlchemy connection string for the reference implementation
 # registry server. Any valid SQLAlchemy connection string is fine.
@@ -34,7 +37,7 @@
 # http://www.sqlalchemy.org/docs/05/reference/sqlalchemy/connections.html#sqlalchemy.create_engine.
 # Note: For absolute addresses, use '////' slashes after 'sqlite:'.
 # (string value)
-#sql_connection = sqlite:///barbican.sqlite
+sql_connection = mysql+pymysql://barbican:opnfv_secret@192.168.10.23/barbican?charset=utf8
 
 # Period in seconds after which SQLAlchemy should reestablish its
 # connection to the database. MySQL uses a default `wait_timeout` of 8
@@ -42,7 +45,7 @@
 # 'MySQL Gone Away' exceptions. If you notice this, you can lower this
 # value to ensure that SQLAlchemy reconnects before MySQL can drop the
 # connection. (integer value)
-#sql_idle_timeout = 3600
+sql_idle_timeout = 180
 
 # Maximum number of database connection retries during startup. Set to
 # -1 to specify an infinite retry count. (integer value)
@@ -53,15 +56,15 @@
 #sql_retry_interval = 1
 
 # Create the Barbican database on service startup. (boolean value)
-#db_auto_create = true
+db_auto_create = false
 
 # Maximum page size for the 'limit' paging URL parameter. (integer
 # value)
-#max_limit_paging = 100
+max_limit_paging = 100
 
 # Default page size for the 'limit' paging URL parameter. (integer
 # value)
-#default_limit_paging = 10
+default_limit_paging = 10
 
 # Accepts a class imported from the sqlalchemy.pool module, and
 # handles the details of building the pool for you. If commented out,
@@ -109,156 +112,114 @@
 # provided then the existence of this option overrides the usage of
 # that option. (string value)
 #backdoor_socket = <None>
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of
-# the default INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of the default
+# INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to
-# any existing logging configuration files. For details about logging
-# configuration files, see the Python logging module documentation.
-# Note that when logging configuration files are used then all logging
-# configuration is set in the configuration file and other logging
-# configuration options are ignored (for example, log-date-format).
-# (string value)
+# The name of a logging configuration file. This file is appended to any
+# existing logging configuration files. For details about logging configuration
+# files, see the Python logging module documentation. Note that when logging
+# configuration files are used then all logging configuration is set in the
+# configuration file and other logging configuration options are ignored (for
+# example, logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
 #log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set.
-# (string value)
+# %(default)s . This option is ignored if log_config_append is set. (string
+# value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default
-# is set, logging will go to stderr as defined by use_stderr. This
-# option is ignored if log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default is set,
+# logging will go to stderr as defined by use_stderr. This option is ignored if
+# log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths.
-# This option is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths. This option
+# is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is
-# moved or removed this handler will open a new log file with
-# specified path instantaneously. It makes sense only if log_file
-# option is specified and Linux platform is used. This option is
+# Uses logging handler designed to watch file system. When log file is moved or
+# removed this handler will open a new log file with specified path
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and will be
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you may wish
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and
-# will be changed later to honor RFC5424. This option is ignored if
-# log_config_append is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you
-# may wish to enable journal support. Doing so will use the journal
-# native protocol which includes structured metadata in addition to
-# log messages.This option is ignored if log_config_append is set.
-# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if
-# log_config_append is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if
-# log_config_append is set. (boolean value)
+# Log output to standard error. This option is ignored if log_config_append is
+# set. (boolean value)
 #use_stderr = false
 
-# Log output to Windows Event Log. (boolean value)
-#use_eventlog = false
-
-# The amount of time before the log files are rotated. This option is
-# ignored unless log_rotation_type is setto "interval". (integer
-# value)
-#log_rotate_interval = 1
-
-# Rotation interval type. The time of the last file change (or the
-# time when the service was started) is used when scheduling the next
-# rotation. (string value)
-# Possible values:
-# Seconds - <No description provided>
-# Minutes - <No description provided>
-# Hours - <No description provided>
-# Days - <No description provided>
-# Weekday - <No description provided>
-# Midnight - <No description provided>
-#log_rotate_interval_type = days
-
-# Maximum number of rotated log files. (integer value)
-#max_logfile_count = 30
-
-# Log file maximum size in MB. This option is ignored if
-# "log_rotation_type" is not set to "size". (integer value)
-#max_logfile_size_mb = 200
-
-# Log rotation type. (string value)
-# Possible values:
-# interval - Rotate logs at predefined time intervals.
-# size - Rotate logs once they reach a predefined size.
-# none - Do not rotate log files.
-#log_rotation_type = none
-
-# Format string to use for log messages with context. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined.
-# Used by oslo_log.formatters.ContextFormatter (string value)
+# Format string to use for log messages when context is undefined. (string
+# value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the
-# message is DEBUG. Used by oslo_log.formatters.ContextFormatter
-# (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. Used by
-# oslo_log.formatters.ContextFormatter (string value)
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is
-# ignored if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
+# List of package logging levels in logger=LEVEL pairs. This option is ignored
+# if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message.
-# (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message.
-# (string value)
+# The format for an instance UUID that is passed with the log message. (string
+# value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer
-# value)
+# Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
-# WARNING, DEBUG or empty string. Logs with level greater or equal to
-# rate_limit_except_level are not filtered. An empty string means that
-# all levels are filtered. (string value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
+# value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
@@ -271,24 +232,167 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer
-# value)
+# The pool size limit for connections expiration policy (integer value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer
-# value)
+# The time-to-live in sec of idle connections in the pool (integer value)
 #conn_pool_ttl = 1200
 
-# Size of executor thread pool when executor is threading or eventlet.
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
+# The "host" option should point or resolve to this address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic. Default is
+# unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
+# "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent after
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises timeout
+# exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing target.
 # (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+# value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes sense only
+# with use_router_proxy=False which means to use direct connections for direct
+# message types (ignored otherwise). (boolean value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover reasons.
+# This option is actual only in dynamic connections mode. (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with ZMQBindError.
+# (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means not keeping
+# a queue when server side disconnects. False means to keep queue and messages
+# even if server is disconnected, when the server appears we send all
+# accumulated messages to it. (boolean value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
+# other negative value) means to skip any overrides and leave it to OS default;
+# 0 and 1 (or any other positive value) mean to disable and enable the option
+# respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition. The unit
+# is platform dependent, for example, seconds in Linux, milliseconds in Windows
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring that remote
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not received. The
+# unit is platform dependent, for example, seconds in Linux, milliseconds in
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism works only
+# via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each retry
+# attempt this timeout is multiplied by some specified multiplier. (integer
+# value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt. (integer
+# value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems occurred:
+# positive value N means at most N retries, 0 means no retries, None or -1 (or
+# any other negative values) mean to retry forever. This option is used only if
+# acknowledgments are enabled. (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option has higher
+# priority then the default publishers list taken from the matchmaker. (list
+# value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to
-# the messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to the
+# messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -298,12 +402,20 @@
 # oslo_messaging.TransportURL at
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
-#transport_url = rabbit://
-
-# The default exchange under which topics are scoped. May be
-# overridden by an exchange name specified in the transport_url
-# option. (string value)
-#control_exchange = openstack
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
+# include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be overridden by an
+# exchange name specified in the transport_url option. (string value)
+#control_exchange = keystone
+
 
 #
 # From oslo.service.periodic_task
@@ -311,41 +423,37 @@
 
 # Some periodic tasks can be run in a separate process. Should we run
 # them here? (boolean value)
-#run_external_periodic_tasks = true
-
-#
+#run_external_periodic_tasks = true#
 # From oslo.service.wsgi
 #
 
 # File name for the paste.deploy config for api service (string value)
 #api_paste_config = api-paste.ini
 
-# A python format string that is used as the template to generate log
-# lines. The following values can beformatted into it: client_ip,
-# date_time, request_line, status_code, body_length, wall_seconds.
-# (string value)
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
 #wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f
 
-# Sets the value of TCP_KEEPIDLE in seconds for each server socket.
-# Not supported on OS X. (integer value)
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
 #tcp_keepidle = 600
 
 # Size of the pool of greenthreads used by wsgi (integer value)
 #wsgi_default_pool_size = 100
 
-# Maximum line size of message headers to be accepted. max_header_line
-# may need to be increased when using large tokens (typically those
-# generated when keystone is configured to use PKI tokens with big
-# service catalogs). (integer value)
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated when
+# keystone is configured to use PKI tokens with big service catalogs). (integer
+# value)
 #max_header_line = 16384
 
-# If False, closes the client socket connection explicitly. (boolean
-# value)
+# If False, closes the client socket connection explicitly. (boolean value)
 #wsgi_keep_alive = true
 
-# Timeout for client connections' socket operations. If an incoming
-# connection is idle for this number of seconds it will be closed. A
-# value of '0' means wait forever. (integer value)
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
 #client_socket_timeout = 900
 
 
@@ -377,35 +485,6 @@
 
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain
-# received in the requests "origin" header. Format:
-# "<protocol>://<host>[:<port>]", no trailing slash. Example:
-# https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials
-# (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to
-# HTTP Simple Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Project-Id,X-Identity-Status,X-User-Id,X-Storage-Token,X-Domain-Id,X-User-Domain-Id,X-Project-Domain-Id,X-Roles
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list
-# value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual
-# request. (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Project-Id,X-Identity-Status,X-User-Id,X-Storage-Token,X-Domain-Id,X-User-Domain-Id,X-Project-Domain-Id,X-Roles
-
 
 [crypto]
 
@@ -414,120 +493,97 @@
 #
 
 # Extension namespace to search for plugins. (string value)
-#namespace = barbican.crypto.plugin
+namespace = barbican.crypto.plugin
 
 # List of crypto plugins to load. (multi valued)
 #enabled_crypto_plugins = simple_crypto
 
 
-[dogtag_plugin]
-
-#
-# From barbican.plugin.dogtag
-#
-
-# Path to PEM file for authentication (string value)
-#pem_path = /etc/barbican/kra_admin_cert.pem
-
-# Hostname for the Dogtag instance (string value)
-#dogtag_host = localhost
-
-# Port for the Dogtag instance (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#dogtag_port = 8443
-
-# Path to the NSS certificate database (string value)
-#nss_db_path = /etc/barbican/alias
-
-# Password for the NSS certificate databases (string value)
-#nss_password = <None>
-
-# Profile for simple CMC requests (string value)
-#simple_cmc_profile = caOtherCert
-
-# List of automatically approved enrollment profiles (string value)
-#auto_approved_profiles = caServerCert
-
-# Time in days for CA entries to expire (string value)
-#ca_expiration_time = 1
-
-# Working directory for Dogtag plugin (string value)
-#plugin_working_dir = /etc/barbican/dogtag
+
+[secretstore:software]
+secret_store_plugin = store_crypto
+crypto_plugin = simple_crypto
+global_default = True
+
+
+
+[simple_crypto_plugin]
+#
+# From barbican.plugin.crypto.simple
+#
+
+# Key encryption key to be used by Simple Crypto Plugin (string value)
+kek = YWJjZGVmZ2hpamtsbW5vcHFyc3R1dnd4eXoxMjM0NTY=
 
 # User friendly plugin name (string value)
-#plugin_name = Dogtag KRA
-
-# Retries when storing or generating secrets (integer value)
-#retries = 3
+#plugin_name = Software Only Crypto
+
 
 
 [keystone_authtoken]
 
+
 #
 # From keystonemiddleware.auth_token
 #
 
-# Complete "public" Identity API endpoint. This endpoint should not be
-# an "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to
-# authenticate. Although this endpoint should ideally be unversioned,
-# client support in the wild varies. If you're using a versioned v2
-# endpoint here, then this should *not* be the same endpoint the
-# service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
-
-# DEPRECATED: Complete "public" Identity API endpoint. This endpoint
-# should not be an "admin" endpoint, as it should be accessible by all
-# end users. Unauthenticated clients are redirected to this endpoint
-# to authenticate. Although this endpoint should ideally be
-# unversioned, client support in the wild varies. If you're using a
-# versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because
-# normal end users may not be able to reach that endpoint. This option
-# is deprecated in favor of www_authenticate_uri and will be removed
-# in the S release. (string value)
+www_authenticate_uri = http://192.168.10.35:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of
-# www_authenticate_uri and will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
 
-# Do not handle authorization requests within the middleware, but
-# delegate the authorization decision to downstream WSGI components.
-# (boolean value)
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
 #delay_auth_decision = false
 
-# Request timeout value for communicating with Identity API server.
-# (integer value)
+# Request timeout value for communicating with Identity API server. (integer
+# value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with
-# Identity API Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this
-# option to have the middleware share a caching backend with swift.
-# Otherwise, use the ``memcached_servers`` option instead. (string
-# value)
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
 #cache = <None>
 
-# Required if identity server requires client certificate (string
-# value)
+# Required if identity server requires client certificate (string value)
 #certfile = <None>
 
-# Required if identity server requires client certificate (string
-# value)
+# Required if identity server requires client certificate (string value)
 #keyfile = <None>
 
-# A PEM encoded Certificate Authority to use when verifying HTTPs
-# connections. Defaults to system CAs. (string value)
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
 #cafile = <None>
 
 # Verify HTTPS connections. (boolean value)
@@ -536,118 +592,220 @@
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
 
-# DEPRECATED: Directory used to cache files related to PKI tokens.
-# This option has been deprecated in the Ocata release and will be
-# removed in the P release. (string value)
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #signing_dir = <None>
 
-# Optionally specify a list of memcached server(s) to use for caching.
-# If left undefined, tokens will instead be cached in-process. (list
-# value)
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the
-# middleware caches previously-seen tokens for a configurable duration
-# (in seconds). Set to -1 to disable caching completely. (integer
-# value)
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
-# (Optional) If defined, indicate whether token data should be
-# authenticated or authenticated and encrypted. If MAC, token data is
-# authenticated (with HMAC) in the cache. If ENCRYPT, token data is
-# encrypted and authenticated in the cache. If the value is not one of
-# these options or empty, auth_token will raise an exception on
-# initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This
-# string is used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead
-# before it is tried again. (integer value)
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every
-# memcached server. (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
-# (Optional) Socket timeout in seconds for communicating with a
-# memcached server. (integer value)
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
 #memcache_pool_socket_timeout = 3
 
-# (Optional) Number of seconds a connection to memcached is held
-# unused in the pool before it is closed. (integer value)
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
 #memcache_pool_unused_timeout = 60
 
-# (Optional) Number of seconds that an operation will wait to get a
-# memcached client connection from the pool. (integer value)
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
 #memcache_pool_conn_get_timeout = 10
 
-# (Optional) Use the advanced (eventlet safe) memcached client pool.
-# The advanced pool will only work under python 2.x. (boolean value)
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
 #memcache_use_advanced_pool = false
 
-# (Optional) Indicate whether to set the X-Service-Catalog header. If
-# False, middleware will not ask for service catalog on token
-# validation and will not set the X-Service-Catalog header. (boolean
-# value)
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
 #include_service_catalog = true
 
-# Used to control the use and type of token binding. Can be set to:
-# "disabled" to not check token binding. "permissive" (default) to
-# validate binding information if the bind type is of a form known to
-# the server and ignore it if not. "strict" like "permissive" but if
-# the bind type is unknown the token will be rejected. "required" any
-# form of token binding is needed to be allowed. Finally the name of a
-# binding method that must be present in tokens. (string value)
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may
-# be a single algorithm or multiple. The algorithms are those
-# supported by Python standard hashlib.new(). The hashes will be tried
-# in the order given, so put the preferred one first for performance.
-# The result of the first hash will be stored in the cache. This will
-# typically be set to multiple values only while migrating from a less
-# secure algorithm to a more secure one. Once all the old tokens are
-# expired this option should be set to a single value for better
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
 # performance. (list value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #hash_algorithms = md5
 
-# A choice of roles that must be present in a service token. Service
-# tokens are allowed to request that an expired token can be used and
-# so this check should tightly control that only actual services
-# should be sending this token. Roles here are applied as an ANY check
-# so any role in this list must be present. For backwards
-# compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens
-# pass that don't pass the service_token_roles check as valid. Setting
-# this true will become the default in a future release and should be
-# enabled if possible. (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
-
-# Config Section from which to load plugin specific options (string
-# value)
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = barbican
+
 
 [keystone_notifications]
 
@@ -657,7 +815,7 @@
 
 # True enables keystone notification listener  functionality. (boolean
 # value)
-#enable = false
+enable = True
 
 # The default exchange under which topics are scoped. May be
 # overridden by an exchange name specified in the transport_url
@@ -671,13 +829,26 @@
 # messages will be dispatched to one of the servers in a round-robin
 # fashion. That's why Barbican service should have its own dedicated
 # notification queue so that it receives all of Keystone
-# notifications. (string value)
-#topic = notifications
+# notifications.
+# Alternatively if the chosen oslo.messaging backend
+# supports listener pooling (for example rabbitmq), setting a non-
+# default 'pool_name' option should be preferred. (string value)
+topic = notifications
+
+# Pool name for notifications listener. Setting this to a distinctive
+# value will allow barbican notifications listener to receive its own
+# copy of all messages from the topic without without interfering with
+# other services listening on the same topic. This feature is
+# supported only by some oslo.messaging backends (in particilar by
+# rabbitmq) and for those it is preferrable to use it instead of
+# separate notification topic for barbican. (string value)
+#pool_name = <None>
+pool_name = barbican
 
 # True enables requeue feature in case of notification processing
 # error. Enable this only when underlying transport supports this
 # feature. (boolean value)
-#allow_requeue = false
+allow_requeue = false
 
 # Version of tasks invoked via notifications (string value)
 #version = 1.0
@@ -687,337 +858,58 @@
 #thread_pool_size = 10
 
 
-[kmip_plugin]
-
-#
-# From barbican.plugin.secret_store.kmip
-#
-
-# Username for authenticating with KMIP server (string value)
-#username = <None>
-
-# Password for authenticating with KMIP server (string value)
-#password = <None>
-
-# Address of the KMIP server (string value)
-#host = localhost
-
-# Port for the KMIP server (port value)
+[matchmaker_redis]
+
+#
+# From oslo.messaging
+#
+
+# DEPRECATED: Host to locate redis. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#port = 5696
-
-# SSL version, maps to the module ssl's constants (string value)
-#ssl_version = PROTOCOL_TLSv1_2
-
-# File path to concatenated "certification authority" certificates
-# (string value)
-#ca_certs = <None>
-
-# File path to local client certificate (string value)
-#certfile = <None>
-
-# File path to local client certificate keyfile (string value)
-#keyfile = <None>
-
-# Only support PKCS#1 encoding of asymmetric keys (boolean value)
-#pkcs1_only = false
-
-# User friendly plugin name (string value)
-#plugin_name = KMIP HSM
-
-
-[oslo_messaging_amqp]
-
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode),
+# e.g., [host:port, host1:port ... ] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+[oslo_messaging_rabbit]
 #
 # From oslo.messaging
 #
 
-# Name for the AMQP container. must be globally unique. Defaults to a
-# generated UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are
-# given, it will use the system's CA-bundle to verify the server's
-# certificate. (boolean value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate
-# (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication
-# (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate
-# (optional) (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate
-# matches the hostname in the transport_url. In some configurations it
-# may be preferable to use the virtual hostname instead, for example
-# if the server uses the Server Name Indication TLS extension
-# (rfc6066) to provide a certificate per virtual host. Set
-# ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string
-# value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after
-# each unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval +
-# connection_retry_backoff (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due
-# to a recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which
-# failed due to a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used
-# when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used
-# when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link
-# after expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not
-# support routing otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not
-# natively support virtual hosting (such as qpidd). When set to true
-# the virtual host name will be added to all message bus addresses,
-# effectively creating a private 'subnet' per virtual host. Set to
-# False if the message bus supports virtual hosting using the
-# 'hostname' field in the AMQP 1.0 Open performative as the name of
-# the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string
-# value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used
-# by the message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular
-# RPC/Notification server. Used by the message bus to identify
-# messages sent to a single destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers.
-# Used by the message bus to identify messages that should be
-# delivered in a round-robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy
-# (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool
-# (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate
-# message consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds
-# (floating point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer
-# value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate
-# (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If
-# not set, we fall back to the same configuration used for RPC.
-# (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message
-# which failed to be delivered due to a recoverable error. 0 - No
-# retry, -1 - indefinite (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
 # Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
 #amqp_durable_queues = false
 
 # Auto-delete queues in AMQP. (boolean value)
@@ -1027,47 +919,60 @@
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
 
-# SSL version to use (valid only if SSL enabled). Valid values are
-# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be
-# available on some distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled).
-# (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer
-# cancel notification. (floating point value)
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
 #kombu_reconnect_delay = 1.0
 
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
-# will not be used. This option may not be available in future
-# versions. (string value)
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
 #kombu_compression = <None>
 
-# How long to wait a missing client before abandoning to send it its
-# replies. This value should not be longer than rpc_response_timeout.
-# (integer value)
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
 # Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
 #kombu_missing_consumer_retry_timeout = 60
 
-# Determines how the next RabbitMQ node is chosen in case the one we
-# are currently connected to becomes unavailable. Takes effect only if
-# more than one RabbitMQ node is provided in config. (string value)
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
 # Possible values:
 # round-robin - <No description provided>
 # shuffle - <No description provided>
 #kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
 
 # The RabbitMQ login method. (string value)
 # Possible values:
@@ -1076,30 +981,40 @@
 # RABBIT-CR-DEMO - <No description provided>
 #rabbit_login_method = AMQPLAIN
 
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
 # How frequently to retry connecting with RabbitMQ. (integer value)
 #rabbit_retry_interval = 1
 
-# How long to backoff for between retries when connecting to RabbitMQ.
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
 # (integer value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30
-# seconds. (integer value)
 #rabbit_interval_max = 30
 
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
-# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
-# queue mirroring is no longer controlled by the x-ha-policy argument
-# when declaring a queue. If you just want to make sure that all
-# queues (except those with auto-generated names) are mirrored across
-# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
-# mode": "all"}' " (boolean value)
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
 #rabbit_ha_queues = false
 
-# Positive integer representing duration in seconds for queue TTL
-# (x-expires). Queues which are unused for the duration of the TTL are
-# automatically deleted. The parameter affects only reply and fanout
-# queues. (integer value)
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
 # Minimum value: 1
 #rabbit_transient_queues_ttl = 1800
 
@@ -1107,9 +1022,9 @@
 # unlimited messages. (integer value)
 #rabbit_qos_prefetch_count = 0
 
-# Number of seconds after which the Rabbit broker is considered down
-# if heartbeat's keep-alive fails (0 disable the heartbeat).
-# EXPERIMENTAL (integer value)
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
 #heartbeat_timeout_threshold = 60
 
 # How often times during the heartbeat_timeout_threshold we check the
@@ -1117,134 +1032,60 @@
 #heartbeat_rate = 2
 
 
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
+
+
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if
-# the middleware should parse the headers or not. (boolean value)
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
 
 
 [oslo_policy]
 
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is
-# compared to the ``scope_types`` of the policy being enforced. If the
-# scopes do not match, an ``InvalidScope`` exception will be raised.
-# If ``False``, a message will be logged informing operators that
-# policies are being invoked with mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string
-# value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be
-# relative to any directory in the search path defined by the
-# config_dir option, or absolute paths. The file defined by
-# policy_file must exist for these directories to be searched.
-# Missing or empty directories are ignored. (multi valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check
-# (string value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean
-# value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string
-# value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string
-# value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[p11_crypto_plugin]
-
-#
-# From barbican.plugin.crypto.p11
-#
-
-# Path to vendor PKCS11 library (string value)
-#library_path = <None>
-
-# Password to login to PKCS11 session (string value)
-#login = <None>
-
-# Master KEK label (as stored in the HSM) (string value)
-#mkek_label = <None>
-
-# Master KEK length in bytes. (integer value)
-#mkek_length = <None>
-
-# Master HMAC Key label (as stored in the HSM) (string value)
-#hmac_label = <None>
-
-# HSM Slot ID (integer value)
-#slot_id = 1
-
-# Flag for Read/Write Sessions (boolean value)
-#rw_session = true
-
-# Project KEK length in bytes. (integer value)
-#pkek_length = 32
-
-# Project KEK Cache Time To Live, in seconds (integer value)
-#pkek_cache_ttl = 900
-
-# Project KEK Cache Item Limit (integer value)
-#pkek_cache_limit = 100
-
-# Secret encryption mechanism (string value)
-# Deprecated group/name - [p11_crypto_plugin]/algorithm
-#encryption_mechanism = CKM_AES_CBC
-
-# HMAC Key Type (string value)
-#hmac_key_type = CKK_AES
-
-# HMAC Key Generation Algorithm (string value)
-#hmac_keygen_mechanism = CKM_AES_KEY_GEN
-
-# HMAC key wrap mechanism (string value)
-#hmac_keywrap_mechanism = CKM_SHA256_HMAC
-
-# File to pull entropy for seeding RNG (string value)
-#seed_file =
-
-# Amount of data to read from file for seed (integer value)
-#seed_length = 32
-
-# User friendly plugin name (string value)
-#plugin_name = PKCS11 HSM
-
-# Generate IVs for CKM_AES_GCM mechanism. (boolean value)
-# Deprecated group/name - [p11_crypto_plugin]/generate_iv
-#aes_gcm_generate_iv = true
-
-# Always set CKA_SENSITIVE=CK_TRUE including CKA_EXTRACTABLE=CK_TRUE
-# keys. (boolean value)
-#always_set_cka_sensitive = true
-
 
 [queue]
 
@@ -1255,6 +1096,7 @@
 # True enables queuing, False invokes workers synchronously (boolean
 # value)
 #enable = false
+
 
 # Queue namespace (string value)
 #namespace = barbican
@@ -1324,73 +1166,118 @@
 # Flag to enable multiple secret store plugin backend support. Default
 # is False (boolean value)
 #enable_multiple_secret_stores = false
+enable_multiple_secret_stores = true
 
 # List of suffix to use for looking up plugins which are supported
 # with multiple backend support. (list value)
-#stores_lookup_suffix = <None>
-
-
-[simple_crypto_plugin]
-
-#
-# From barbican.plugin.crypto.simple
-#
-
-# Key encryption key to be used by Simple Crypto Plugin (string value)
-#kek = dGhpcnR5X3R3b19ieXRlX2tleWJsYWhibGFoYmxhaGg=
-
-# User friendly plugin name (string value)
-#plugin_name = Software Only Crypto
-
-
-[snakeoil_ca_plugin]
-
-#
-# From barbican.certificate.plugin.snakeoil
-#
-
-# Path to CA certificate file (string value)
-#ca_cert_path = <None>
-
-# Path to CA certificate key file (string value)
-#ca_cert_key_path = <None>
-
-# Path to CA certificate chain file (string value)
-#ca_cert_chain_path = <None>
-
-# Path to CA chain pkcs7 file (string value)
-#ca_cert_pkcs7_path = <None>
-
-# Directory in which to store certs/keys for subcas (string value)
-#subca_cert_key_directory = /etc/barbican/snakeoil-cas
+stores_lookup_suffix = software
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
 
-# CA certificate file to use to verify connecting clients. (string
-# value)
+# CA certificate file to use to verify connecting clients. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_ca_file
 #ca_file = <None>
 
-# Certificate file to use when starting the server securely. (string
-# value)
+# Certificate file to use when starting the server securely. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_cert_file
 #cert_file = <None>
 
-# Private key file to use when starting the server securely. (string
-# value)
+# Private key file to use when starting the server securely. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_key_file
 #key_file = <None>
 
-# SSL version to use (valid only if SSL enabled). Valid values are
-# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be
-# available on some distributions. (string value)
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
 #version = <None>
 
-# Sets the list of available ciphers. value should be a string in the
-# OpenSSL cipher list format. (string value)
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
 #ciphers = <None>
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+

2020-01-15 02:46:17,729 [salt.state       :1951][INFO    ][32681] Completed state [/etc/barbican/barbican.conf] at time 02:46:17.729332 duration_in_ms=505.197
2020-01-15 02:46:17,730 [salt.state       :1780][INFO    ][32681] Running state [barbican-db-manage upgrade] at time 02:46:17.729963
2020-01-15 02:46:17,730 [salt.state       :1813][INFO    ][32681] Executing state cmd.run for [barbican-db-manage upgrade]
2020-01-15 02:46:17,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command 'barbican-db-manage upgrade' as user 'barbican' in directory '/var/lib/barbican'
2020-01-15 02:46:18,285 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115024618274493
2020-01-15 02:46:18,320 [salt.minion      :1432][INFO    ][1719] Starting a new job with PID 1719
2020-01-15 02:46:18,370 [salt.minion      :1711][INFO    ][1719] Returning information for job: 20200115024618274493
2020-01-15 02:46:24,699 [salt.state       :300 ][INFO    ][32681] {'pid': 1713, 'retcode': 0, 'stderr': '/usr/lib/python3/dist-packages/pymysql/cursors.py:165: Warning: (1831, "Duplicate index \'ix_preferred_certificate_authorities_project_id\' defined on the table \'barbican.preferred_certificate_authorities\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)\n/usr/lib/python3/dist-packages/pymysql/cursors.py:165: Warning: (1831, "Duplicate index \'ix_project_secret_store_project_id\' defined on the table \'barbican.project_secret_store\'. This is deprecated and will be disallowed in a future release.")\n  result = self._query(query)', 'stdout': "2020-01-15 02:46:19.649 1715 WARNING oslo_db.sqlalchemy.engines [-] MySQL SQL mode is 'NO_ENGINE_SUBSTITUTION', consider enabling TRADITIONAL or STRICT_ALL_TABLES\x1b[00m\n2020-01-15 02:46:19.660 1715 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2020-01-15 02:46:19.660 1715 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m\n2020-01-15 02:46:19.736 1715 INFO alembic.runtime.migration [-] Running upgrade  -> 1a0c2cdafb38, create test table\x1b[00m\n2020-01-15 02:46:19.746 1715 INFO alembic.runtime.migration [-] Running upgrade 1a0c2cdafb38 -> juno, juno_initial\x1b[00m\n2020-01-15 02:46:20.105 1715 INFO alembic.runtime.migration [-] Running upgrade juno -> 13d127569afa, create_secret_store_metadata_table\x1b[00m\n2020-01-15 02:46:20.165 1715 INFO alembic.runtime.migration [-] Running upgrade 13d127569afa -> 1e86c18af2dd, add new columns type meta containerId\x1b[00m\n2020-01-15 02:46:20.283 1715 INFO alembic.runtime.migration [-] Running upgrade 1e86c18af2dd -> cd4106a1a0, add-cert-to-container-type\x1b[00m\n2020-01-15 02:46:20.307 1715 INFO alembic.runtime.migration [-] Running upgrade cd4106a1a0 -> 47b69e523451, Made plugin names in kek datum non nullable\x1b[00m\n2020-01-15 02:46:20.331 1715 INFO alembic.runtime.migration [-] Running upgrade 47b69e523451 -> 4070806f6972, Add orders plugin metadata table and relationships\x1b[00m\n2020-01-15 02:46:20.381 1715 INFO alembic.runtime.migration [-] Running upgrade 4070806f6972 -> 2ab3f5371bde, dsa in container type modelbase_to\x1b[00m\n2020-01-15 02:46:20.679 1715 INFO alembic.runtime.migration [-] Running upgrade 2ab3f5371bde -> 2843d6469f25, add sub status info for orders\x1b[00m\n2020-01-15 02:46:20.757 1715 INFO alembic.runtime.migration [-] Running upgrade 2843d6469f25 -> 254495565185, removing redundant fields from order\x1b[00m\n2020-01-15 02:46:20.991 1715 INFO alembic.runtime.migration [-] Running upgrade 254495565185 -> 795737bb3c3, Change tenants to projects\x1b[00m\n2020-01-15 02:46:21.585 1715 INFO alembic.runtime.migration [-] Running upgrade 795737bb3c3 -> 256da65e0c5f, Change keystone_id for external_id in Project model\x1b[00m\n2020-01-15 02:46:21.628 1715 INFO alembic.runtime.migration [-] Running upgrade 256da65e0c5f -> aa2cf96a1d5, Add OrderRetryTask\x1b[00m\n2020-01-15 02:46:21.667 1715 INFO alembic.runtime.migration [-] Running upgrade aa2cf96a1d5 -> 443d6f4a69ac, added secret type column to secrets table\x1b[00m\n2020-01-15 02:46:21.705 1715 INFO alembic.runtime.migration [-] Running upgrade 443d6f4a69ac -> 3d36a26b88af, Add OrderBarbicanMetadata table\x1b[00m\n2020-01-15 02:46:21.753 1715 INFO alembic.runtime.migration [-] Running upgrade 3d36a26b88af -> 2d21598e7e70, Added CA related tables\x1b[00m\n2020-01-15 02:46:21.959 1715 INFO alembic.runtime.migration [-] Running upgrade 2d21598e7e70 -> 1c0f328bfce0, Fixing composite primary keys and adding indexes to foreign key\x1b[00m\n2020-01-15 02:46:22.608 1715 INFO alembic.runtime.migration [-] Running upgrade 1c0f328bfce0 -> 1a7cf79559e3, New secret and container ACL tables\x1b[00m\n2020-01-15 02:46:22.984 1715 INFO alembic.runtime.migration [-] Running upgrade 1a7cf79559e3 -> 3041b53b95d7, Remove size limits on meta table values\x1b[00m\n2020-01-15 02:46:23.073 1715 INFO alembic.runtime.migration [-] Running upgrade 3041b53b95d7 -> 30dba269cc64, Update order_retry_tasks table\x1b[00m\n2020-01-15 02:46:23.249 1715 INFO alembic.runtime.migration [-] Running upgrade 30dba269cc64 -> 6a4457517a3, rename ACL creator_only to project_access\x1b[00m\n2020-01-15 02:46:23.333 1715 INFO alembic.runtime.migration [-] Running upgrade 6a4457517a3 -> 1bc885808c76, Add project id to Secrets\x1b[00m\n2020-01-15 02:46:23.429 1715 INFO alembic.runtime.migration [-] Running upgrade 1bc885808c76 -> 161f8aceb687, fill project_id to secrets where missing\x1b[00m\n2020-01-15 02:46:23.787 1715 INFO alembic.runtime.migration [-] Running upgrade 161f8aceb687 -> 1bece815014f, remove ProjectSecret table\x1b[00m\n2020-01-15 02:46:23.814 1715 INFO alembic.runtime.migration [-] Running upgrade 1bece815014f -> kilo, kilo\x1b[00m\n2020-01-15 02:46:23.821 1715 INFO alembic.runtime.migration [-] Running upgrade kilo -> 46b98cde536, Add project quotas table\x1b[00m\n2020-01-15 02:46:23.895 1715 INFO alembic.runtime.migration [-] Running upgrade 46b98cde536 -> 156cd9933643, Add project column to consumer table\x1b[00m\n2020-01-15 02:46:24.008 1715 INFO alembic.runtime.migration [-] Running upgrade 156cd9933643 -> 3c3b04040bfe, add owning project and creator to CAs\x1b[00m\n2020-01-15 02:46:24.114 1715 INFO alembic.runtime.migration [-] Running upgrade 3c3b04040bfe -> 10220ccbe7fa, Remove transport keys column from project quotas table\x1b[00m\n2020-01-15 02:46:24.154 1715 INFO alembic.runtime.migration [-] Running upgrade 10220ccbe7fa -> 4ecde3a3a72a, Add cas column to project quotas table\x1b[00m\n2020-01-15 02:46:24.195 1715 INFO alembic.runtime.migration [-] Running upgrade 4ecde3a3a72a -> 39a96e67e990, Add missing constraints\x1b[00m\n2020-01-15 02:46:24.264 1715 INFO alembic.runtime.migration [-] Running upgrade 39a96e67e990 -> dce488646127, add-secret-user-metadata\x1b[00m\n2020-01-15 02:46:24.323 1715 INFO alembic.runtime.migration [-] Running upgrade dce488646127 -> d2780d5aa510, change_url_length\x1b[00m\n2020-01-15 02:46:24.347 1715 INFO alembic.runtime.migration [-] Running upgrade d2780d5aa510 -> 39cf2e645cba, Model for multiple backend support\x1b[00m"}
2020-01-15 02:46:24,702 [salt.state       :1951][INFO    ][32681] Completed state [barbican-db-manage upgrade] at time 02:46:24.701802 duration_in_ms=6971.816
2020-01-15 02:46:24,708 [salt.state       :1780][INFO    ][32681] Running state [barbican-manage db sync_secret_stores] at time 02:46:24.708260
2020-01-15 02:46:24,709 [salt.state       :1813][INFO    ][32681] Executing state cmd.run for [barbican-manage db sync_secret_stores]
2020-01-15 02:46:24,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command 'barbican-manage db sync_secret_stores' as user 'barbican' in directory '/var/lib/barbican'
2020-01-15 02:46:27,371 [salt.state       :300 ][INFO    ][32681] {'pid': 1743, 'retcode': 0, 'stderr': '', 'stdout': "2020-01-15 02:46:26.740 1745 INFO barbican.model.sync [-] Syncing the secret_stores table with barbican.conf\x1b[00m\n2020-01-15 02:46:26.740 1745 INFO barbican.model.repositories [-] Setting up database engine and session factory\x1b[00m\n2020-01-15 02:46:26.797 1745 WARNING oslo_db.sqlalchemy.engines [-] MySQL SQL mode is 'NO_ENGINE_SUBSTITUTION', consider enabling TRADITIONAL or STRICT_ALL_TABLES\x1b[00m\n2020-01-15 02:46:26.809 1745 INFO barbican.model.repositories [-] Not auto-creating barbican registry DB\x1b[00m\n2020-01-15 02:46:27.062 1745 INFO barbican.plugin.crypto.simple_crypto [-] Software Only Crypto initialized\x1b[00m"}
2020-01-15 02:46:27,374 [salt.state       :1951][INFO    ][32681] Completed state [barbican-manage db sync_secret_stores] at time 02:46:27.374712 duration_in_ms=2666.452
2020-01-15 02:46:27,377 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:46:27.377245
2020-01-15 02:46:27,377 [salt.state       :1813][INFO    ][32681] Executing state file.exists for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2020-01-15 02:46:27,378 [salt.state       :300 ][INFO    ][32681] Path /etc/apache2/sites-available/wsgi_barbican_admin.conf exists
2020-01-15 02:46:27,379 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 02:46:27.379158 duration_in_ms=1.913
2020-01-15 02:46:27,380 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:46:27.379991
2020-01-15 02:46:27,380 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2020-01-15 02:46:27,699 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2020-01-15 02:46:27,700 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:46:27.700116 duration_in_ms=320.124
2020-01-15 02:46:27,701 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:46:27.701808
2020-01-15 02:46:27,702 [salt.state       :1813][INFO    ][32681] Executing state file.exists for [/etc/apache2/sites-available/wsgi_barbican.conf]
2020-01-15 02:46:27,702 [salt.state       :300 ][INFO    ][32681] Path /etc/apache2/sites-available/wsgi_barbican.conf exists
2020-01-15 02:46:27,703 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 02:46:27.703236 duration_in_ms=1.428
2020-01-15 02:46:27,704 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:46:27.704109
2020-01-15 02:46:27,704 [salt.state       :1813][INFO    ][32681] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2020-01-15 02:46:28,086 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2020-01-15 02:46:28,087 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 02:46:28.087034 duration_in_ms=382.924
2020-01-15 02:46:28,087 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:46:28.087880
2020-01-15 02:46:28,088 [salt.state       :1813][INFO    ][32681] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2020-01-15 02:46:28,091 [salt.state       :300 ][INFO    ][32681] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2020-01-15 02:46:28,091 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 02:46:28.091906 duration_in_ms=4.026
2020-01-15 02:46:28,097 [salt.state       :1780][INFO    ][32681] Running state [apache2] at time 02:46:28.097213
2020-01-15 02:46:28,097 [salt.state       :1813][INFO    ][32681] Executing state service.running for [apache2]
2020-01-15 02:46:28,098 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2020-01-15 02:46:28,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:46:28,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:46:28,240 [salt.state       :300 ][INFO    ][32681] The service apache2 is already running
2020-01-15 02:46:28,241 [salt.state       :1951][INFO    ][32681] Completed state [apache2] at time 02:46:28.241567 duration_in_ms=144.352
2020-01-15 02:46:28,244 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/conf-enabled/security.conf] at time 02:46:28.244630
2020-01-15 02:46:28,245 [salt.state       :1813][INFO    ][32681] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2020-01-15 02:46:28,251 [salt.state       :300 ][INFO    ][32681] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2020-01-15 02:46:28,251 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/conf-enabled/security.conf] at time 02:46:28.251829 duration_in_ms=7.199
2020-01-15 02:46:28,252 [salt.state       :1780][INFO    ][32681] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:46:28.252528
2020-01-15 02:46:28,253 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2020-01-15 02:46:28,254 [salt.state       :300 ][INFO    ][32681] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2020-01-15 02:46:28,254 [salt.state       :1951][INFO    ][32681] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 02:46:28.254575 duration_in_ms=2.047
2020-01-15 02:46:28,258 [salt.state       :1780][INFO    ][32681] Running state [wsgi_barbican] at time 02:46:28.258149
2020-01-15 02:46:28,259 [salt.state       :1813][INFO    ][32681] Executing state apache_site.enabled for [wsgi_barbican]
2020-01-15 02:46:28,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['a2ensite', 'wsgi_barbican'] in directory '/root'
2020-01-15 02:46:28,407 [salt.state       :300 ][INFO    ][32681] {'new': 'wsgi_barbican', 'old': None}
2020-01-15 02:46:28,408 [salt.state       :1951][INFO    ][32681] Completed state [wsgi_barbican] at time 02:46:28.408738 duration_in_ms=150.589
2020-01-15 02:46:28,412 [salt.state       :1780][INFO    ][32681] Running state [wsgi_barbican_admin] at time 02:46:28.412275
2020-01-15 02:46:28,414 [salt.state       :1813][INFO    ][32681] Executing state apache_site.enabled for [wsgi_barbican_admin]
2020-01-15 02:46:28,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['a2ensite', 'wsgi_barbican_admin'] in directory '/root'
2020-01-15 02:46:28,559 [salt.state       :300 ][INFO    ][32681] {'new': 'wsgi_barbican_admin', 'old': None}
2020-01-15 02:46:28,561 [salt.state       :1951][INFO    ][32681] Completed state [wsgi_barbican_admin] at time 02:46:28.560729 duration_in_ms=148.452
2020-01-15 02:46:28,564 [salt.state       :1780][INFO    ][32681] Running state [apache2] at time 02:46:28.564425
2020-01-15 02:46:28,565 [salt.state       :1813][INFO    ][32681] Executing state service.running for [apache2]
2020-01-15 02:46:28,568 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:46:28,614 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2020-01-15 02:46:28,662 [salt.state       :300 ][INFO    ][32681] The service apache2 is already running
2020-01-15 02:46:28,663 [salt.state       :1951][INFO    ][32681] Completed state [apache2] at time 02:46:28.663329 duration_in_ms=98.903
2020-01-15 02:46:28,664 [salt.state       :1780][INFO    ][32681] Running state [apache2] at time 02:46:28.664170
2020-01-15 02:46:28,665 [salt.state       :1813][INFO    ][32681] Executing state service.mod_watch for [apache2]
2020-01-15 02:46:28,667 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2020-01-15 02:46:28,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2020-01-15 02:46:35,908 [salt.state       :300 ][INFO    ][32681] {'apache2': True}
2020-01-15 02:46:35,909 [salt.state       :1951][INFO    ][32681] Completed state [apache2] at time 02:46:35.909647 duration_in_ms=7245.477
2020-01-15 02:46:35,911 [salt.state       :1780][INFO    ][32681] Running state [barbican-keystone-listener] at time 02:46:35.911312
2020-01-15 02:46:35,911 [salt.state       :1813][INFO    ][32681] Executing state service.running for [barbican-keystone-listener]
2020-01-15 02:46:35,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'status', 'barbican-keystone-listener.service', '-n', '0'] in directory '/root'
2020-01-15 02:46:35,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-active', 'barbican-keystone-listener.service'] in directory '/root'
2020-01-15 02:46:35,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2020-01-15 02:46:35,977 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'barbican-keystone-listener.service'] in directory '/root'
2020-01-15 02:46:36,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-active', 'barbican-keystone-listener.service'] in directory '/root'
2020-01-15 02:46:36,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2020-01-15 02:46:36,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2020-01-15 02:46:36,086 [salt.state       :300 ][INFO    ][32681] {'barbican-keystone-listener': True}
2020-01-15 02:46:36,086 [salt.state       :1951][INFO    ][32681] Completed state [barbican-keystone-listener] at time 02:46:36.086841 duration_in_ms=175.528
2020-01-15 02:46:36,087 [salt.state       :1780][INFO    ][32681] Running state [barbican-worker] at time 02:46:36.087427
2020-01-15 02:46:36,087 [salt.state       :1813][INFO    ][32681] Executing state service.dead for [barbican-worker]
2020-01-15 02:46:36,089 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'status', 'barbican-worker.service', '-n', '0'] in directory '/root'
2020-01-15 02:46:36,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-active', 'barbican-worker.service'] in directory '/root'
2020-01-15 02:46:36,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2020-01-15 02:46:36,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2020-01-15 02:46:36,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'barbican-worker.service'] in directory '/root'
2020-01-15 02:46:36,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][32681] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2020-01-15 02:46:37,003 [salt.state       :300 ][INFO    ][32681] {'barbican-worker': True}
2020-01-15 02:46:37,008 [salt.state       :1951][INFO    ][32681] Completed state [barbican-worker] at time 02:46:37.008658 duration_in_ms=921.23
2020-01-15 02:46:37,009 [salt.state       :1780][INFO    ][32681] Running state [/usr/sbin/policy-rc.d] at time 02:46:37.009905
2020-01-15 02:46:37,010 [salt.state       :1813][INFO    ][32681] Executing state file.absent for [/usr/sbin/policy-rc.d]
2020-01-15 02:46:37,011 [salt.state       :300 ][INFO    ][32681] {'removed': '/usr/sbin/policy-rc.d'}
2020-01-15 02:46:37,011 [salt.state       :1951][INFO    ][32681] Completed state [/usr/sbin/policy-rc.d] at time 02:46:37.011368 duration_in_ms=1.462
2020-01-15 02:46:37,025 [salt.minion      :1711][INFO    ][32681] Returning information for job: 20200115024533075733
2020-01-15 02:49:33,439 [salt.utils.schedule:1377][INFO    ][1710] Running scheduled job: __mine_interval
2020-01-15 03:05:32,414 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command cmd.run with jid 20200115030532398299
2020-01-15 03:05:32,450 [salt.minion      :1432][INFO    ][2423] Starting a new job with PID 2423
2020-01-15 03:05:32,480 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2423] Executing command '. /root/keystonercv3;   openstack compute service list;   openstack network agent list;   openstack stack list;   openstack volume service list' in directory '/root'
2020-01-15 03:05:47,496 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115030547484661
2020-01-15 03:05:47,529 [salt.minion      :1432][INFO    ][2449] Starting a new job with PID 2449
2020-01-15 03:05:47,585 [salt.minion      :1711][INFO    ][2449] Returning information for job: 20200115030547484661
2020-01-15 03:05:52,611 [salt.minion      :1711][INFO    ][2423] Returning information for job: 20200115030532398299
2020-01-15 03:05:53,342 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command cmd.run with jid 20200115030553331773
2020-01-15 03:05:53,370 [salt.minion      :1432][INFO    ][2462] Starting a new job with PID 2462
2020-01-15 03:05:53,390 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2462] Executing command '. /root/keystonercv3;   openstack network create --external --default --provider-network-type flat   --provider-physical-network physnet1 floating_net' in directory '/root'
2020-01-15 03:05:59,151 [salt.minion      :1711][INFO    ][2462] Returning information for job: 20200115030553331773
2020-01-15 03:05:59,854 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command cmd.run with jid 20200115030559844793
2020-01-15 03:05:59,883 [salt.minion      :1432][INFO    ][2478] Starting a new job with PID 2478
2020-01-15 03:05:59,906 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2478] Executing command '. /root/keystonercv3;   openstack subnet create --gateway 100.64.200.1 --no-dhcp   --allocation-pool start=100.64.200.113,end=100.64.200.253   --network floating_net --subnet-range 100.64.200.0/24 floating_subnet' in directory '/root'
2020-01-15 03:06:07,324 [salt.minion      :1711][INFO    ][2478] Returning information for job: 20200115030559844793
2020-01-15 03:06:08,062 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command state.sls_id with jid 20200115030608051375
2020-01-15 03:06:08,098 [salt.minion      :1432][INFO    ][2496] Starting a new job with PID 2496
2020-01-15 03:06:15,254 [salt.state       :915 ][INFO    ][2496] Loading fresh modules for state activity
2020-01-15 03:06:18,117 [keyring.backend  :170 ][INFO    ][2496] Loading Windows (alt)
2020-01-15 03:06:18,145 [keyring.backend  :170 ][INFO    ][2496] Loading pyfs
2020-01-15 03:06:18,148 [keyring.backend  :170 ][INFO    ][2496] Loading multi
2020-01-15 03:06:18,149 [keyring.backend  :170 ][INFO    ][2496] Loading Google
2020-01-15 03:06:18,152 [keyring.backend  :170 ][INFO    ][2496] Loading Gnome
2020-01-15 03:06:18,165 [keyring.backend  :170 ][INFO    ][2496] Loading keyczar
2020-01-15 03:06:18,166 [keyring.backend  :170 ][INFO    ][2496] Loading file
2020-01-15 03:06:19,093 [salt.state       :1780][INFO    ][2496] Running state [debconf-utils] at time 03:06:19.093401
2020-01-15 03:06:19,093 [salt.state       :1813][INFO    ][2496] Executing state pkg.installed for [debconf-utils]
2020-01-15 03:06:19,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2496] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2020-01-15 03:06:20,012 [salt.state       :300 ][INFO    ][2496] All specified packages are already installed
2020-01-15 03:06:20,012 [salt.state       :1951][INFO    ][2496] Completed state [debconf-utils] at time 03:06:20.012584 duration_in_ms=919.182
2020-01-15 03:06:20,013 [salt.state       :1780][INFO    ][2496] Running state [nova-consoleproxy] at time 03:06:20.013598
2020-01-15 03:06:20,013 [salt.state       :1813][INFO    ][2496] Executing state debconf.set for [nova-consoleproxy]
2020-01-15 03:06:20,014 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2496] Executing command 'debconf-get-selections' in directory '/root'
2020-01-15 03:06:20,417 [salt.state       :300 ][INFO    ][2496] All specified answers are already set
2020-01-15 03:06:20,418 [salt.state       :1951][INFO    ][2496] Completed state [nova-consoleproxy] at time 03:06:20.418137 duration_in_ms=404.536
2020-01-15 03:06:20,420 [salt.state       :1780][INFO    ][2496] Running state [nova-api] at time 03:06:20.420493
2020-01-15 03:06:20,421 [salt.state       :1813][INFO    ][2496] Executing state pkg.installed for [nova-api]
2020-01-15 03:06:20,444 [salt.state       :300 ][INFO    ][2496] All specified packages are already installed
2020-01-15 03:06:20,444 [salt.state       :1951][INFO    ][2496] Completed state [nova-api] at time 03:06:20.444550 duration_in_ms=24.057
2020-01-15 03:06:20,446 [salt.state       :1780][INFO    ][2496] Running state [nova-conductor] at time 03:06:20.446057
2020-01-15 03:06:20,446 [salt.state       :1813][INFO    ][2496] Executing state pkg.installed for [nova-conductor]
2020-01-15 03:06:20,468 [salt.state       :300 ][INFO    ][2496] All specified packages are already installed
2020-01-15 03:06:20,469 [salt.state       :1951][INFO    ][2496] Completed state [nova-conductor] at time 03:06:20.468905 duration_in_ms=22.848
2020-01-15 03:06:20,470 [salt.state       :1780][INFO    ][2496] Running state [nova-consoleauth] at time 03:06:20.470168
2020-01-15 03:06:20,470 [salt.state       :1813][INFO    ][2496] Executing state pkg.installed for [nova-consoleauth]
2020-01-15 03:06:20,493 [salt.state       :300 ][INFO    ][2496] All specified packages are already installed
2020-01-15 03:06:20,494 [salt.state       :1951][INFO    ][2496] Completed state [nova-consoleauth] at time 03:06:20.494191 duration_in_ms=24.023
2020-01-15 03:06:20,495 [salt.state       :1780][INFO    ][2496] Running state [nova-scheduler] at time 03:06:20.495457
2020-01-15 03:06:20,496 [salt.state       :1813][INFO    ][2496] Executing state pkg.installed for [nova-scheduler]
2020-01-15 03:06:20,518 [salt.state       :300 ][INFO    ][2496] All specified packages are already installed
2020-01-15 03:06:20,519 [salt.state       :1951][INFO    ][2496] Completed state [nova-scheduler] at time 03:06:20.519221 duration_in_ms=23.764
2020-01-15 03:06:20,520 [salt.state       :1780][INFO    ][2496] Running state [nova-novncproxy] at time 03:06:20.520538
2020-01-15 03:06:20,521 [salt.state       :1813][INFO    ][2496] Executing state pkg.installed for [nova-novncproxy]
2020-01-15 03:06:20,542 [salt.state       :300 ][INFO    ][2496] All specified packages are already installed
2020-01-15 03:06:20,543 [salt.state       :1951][INFO    ][2496] Completed state [nova-novncproxy] at time 03:06:20.543427 duration_in_ms=22.889
2020-01-15 03:06:20,545 [salt.state       :1780][INFO    ][2496] Running state [python3-novaclient] at time 03:06:20.544942
2020-01-15 03:06:20,545 [salt.state       :1813][INFO    ][2496] Executing state pkg.installed for [python3-novaclient]
2020-01-15 03:06:20,566 [salt.state       :300 ][INFO    ][2496] All specified packages are already installed
2020-01-15 03:06:20,566 [salt.state       :1951][INFO    ][2496] Completed state [python3-novaclient] at time 03:06:20.566569 duration_in_ms=21.628
2020-01-15 03:06:20,571 [salt.state       :1780][INFO    ][2496] Running state [nova_ssl_mysql] at time 03:06:20.571113
2020-01-15 03:06:20,571 [salt.state       :1813][INFO    ][2496] Executing state test.show_notification for [nova_ssl_mysql]
2020-01-15 03:06:20,572 [salt.state       :300 ][INFO    ][2496] Running nova._ssl.mysql
2020-01-15 03:06:20,572 [salt.state       :1951][INFO    ][2496] Completed state [nova_ssl_mysql] at time 03:06:20.572772 duration_in_ms=1.659
2020-01-15 03:06:20,573 [salt.state       :1780][INFO    ][2496] Running state [nova_controller_ssl_rabbitmq] at time 03:06:20.573321
2020-01-15 03:06:20,573 [salt.state       :1813][INFO    ][2496] Executing state test.show_notification for [nova_controller_ssl_rabbitmq]
2020-01-15 03:06:20,574 [salt.state       :300 ][INFO    ][2496] Running nova._ssl.rabbitmq
2020-01-15 03:06:20,575 [salt.state       :1951][INFO    ][2496] Completed state [nova_controller_ssl_rabbitmq] at time 03:06:20.575077 duration_in_ms=1.757
2020-01-15 03:06:20,577 [salt.state       :1780][INFO    ][2496] Running state [/etc/nova/nova.conf] at time 03:06:20.577302
2020-01-15 03:06:20,577 [salt.state       :1813][INFO    ][2496] Executing state file.managed for [/etc/nova/nova.conf]
2020-01-15 03:06:21,602 [salt.state       :300 ][INFO    ][2496] File /etc/nova/nova.conf is in the correct state
2020-01-15 03:06:21,602 [salt.state       :1951][INFO    ][2496] Completed state [/etc/nova/nova.conf] at time 03:06:21.602643 duration_in_ms=1025.339
2020-01-15 03:06:21,604 [salt.state       :1780][INFO    ][2496] Running state [nova-manage api_db sync] at time 03:06:21.603947
2020-01-15 03:06:21,604 [salt.state       :1813][INFO    ][2496] Executing state cmd.run for [nova-manage api_db sync]
2020-01-15 03:06:21,606 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2496] Executing command 'nova-manage api_db sync' as user 'nova' in directory '/var/lib/nova'
2020-01-15 03:06:23,099 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command saltutil.find_job with jid 20200115030623086477
2020-01-15 03:06:23,114 [salt.minion      :1432][INFO    ][2568] Starting a new job with PID 2568
2020-01-15 03:06:23,136 [salt.minion      :1711][INFO    ][2568] Returning information for job: 20200115030623086477
2020-01-15 03:06:26,691 [salt.state       :300 ][INFO    ][2496] {'pid': 2560, 'retcode': 0, 'stderr': '', 'stdout': ''}
2020-01-15 03:06:26,692 [salt.state       :1951][INFO    ][2496] Completed state [nova-manage api_db sync] at time 03:06:26.692280 duration_in_ms=5088.336
2020-01-15 03:06:26,694 [salt.state       :1780][INFO    ][2496] Running state [nova-manage cell_v2 map_cell0] at time 03:06:26.694497
2020-01-15 03:06:26,695 [salt.state       :1813][INFO    ][2496] Executing state cmd.run for [nova-manage cell_v2 map_cell0]
2020-01-15 03:06:26,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2496] Executing command 'nova-manage cell_v2 map_cell0' as user 'nova' in directory '/var/lib/nova'
2020-01-15 03:06:31,390 [salt.state       :300 ][INFO    ][2496] {'pid': 2591, 'retcode': 0, 'stderr': '', 'stdout': 'Cell0 is already setup'}
2020-01-15 03:06:31,390 [salt.state       :1951][INFO    ][2496] Completed state [nova-manage cell_v2 map_cell0] at time 03:06:31.390616 duration_in_ms=4696.119
2020-01-15 03:06:31,392 [salt.state       :1780][INFO    ][2496] Running state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 03:06:31.392544
2020-01-15 03:06:31,393 [salt.state       :1813][INFO    ][2496] Executing state cmd.run for [nova-manage cell_v2 create_cell --name=cell1 --verbose]
2020-01-15 03:06:31,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2496] Executing command 'nova-manage cell_v2 list_cells | grep cell1' as user 'nova' in directory '/var/lib/nova'
2020-01-15 03:06:35,788 [salt.state       :300 ][INFO    ][2496] unless execution succeeded
2020-01-15 03:06:35,789 [salt.state       :1951][INFO    ][2496] Completed state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 03:06:35.788979 duration_in_ms=4396.435
2020-01-15 03:06:35,790 [salt.state       :1780][INFO    ][2496] Running state [nova-manage db sync] at time 03:06:35.790219
2020-01-15 03:06:35,790 [salt.state       :1813][INFO    ][2496] Executing state cmd.run for [nova-manage db sync]
2020-01-15 03:06:35,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2496] Executing command 'nova-manage db sync' as user 'nova' in directory '/var/lib/nova'
2020-01-15 03:06:40,748 [salt.state       :300 ][INFO    ][2496] {'pid': 2643, 'retcode': 0, 'stderr': '', 'stdout': ''}
2020-01-15 03:06:40,750 [salt.state       :1951][INFO    ][2496] Completed state [nova-manage db sync] at time 03:06:40.750112 duration_in_ms=4959.89
2020-01-15 03:06:40,752 [salt.state       :1780][INFO    ][2496] Running state [nova-manage cell_v2 discover_hosts --verbose] at time 03:06:40.752482
2020-01-15 03:06:40,753 [salt.state       :1813][INFO    ][2496] Executing state cmd.run for [nova-manage cell_v2 discover_hosts --verbose]
2020-01-15 03:06:40,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2496] Executing command 'nova-manage cell_v2 discover_hosts --verbose' as user 'nova' in directory '/var/lib/nova'
2020-01-15 03:06:45,822 [salt.state       :300 ][INFO    ][2496] {'pid': 2669, 'retcode': 0, 'stderr': '', 'stdout': "Found 2 cell mappings.\nSkipping cell0 since it does not contain hosts.\nGetting computes from cell 'cell1': abc718f7-cb51-4fc4-81cb-77e8326c8928\nChecking host mapping for compute host 'cmp001': f9b990e5-e81b-4f82-94b4-01ea69790296\nCreating host mapping for compute host 'cmp001': f9b990e5-e81b-4f82-94b4-01ea69790296\nChecking host mapping for compute host 'cmp002': 2bcd13fa-5874-4bba-80da-79c77f5729a4\nCreating host mapping for compute host 'cmp002': 2bcd13fa-5874-4bba-80da-79c77f5729a4\nFound 2 unmapped computes in cell: abc718f7-cb51-4fc4-81cb-77e8326c8928"}
2020-01-15 03:06:45,824 [salt.state       :1951][INFO    ][2496] Completed state [nova-manage cell_v2 discover_hosts --verbose] at time 03:06:45.823863 duration_in_ms=5071.379
2020-01-15 03:06:45,825 [salt.minion      :1711][INFO    ][2496] Returning information for job: 20200115030608051375
2020-01-15 03:06:46,844 [salt.minion      :1308][INFO    ][1710] User sudo_ubuntu Executing command cp.push_dir with jid 20200115030646831513
2020-01-15 03:06:46,885 [salt.minion      :1432][INFO    ][2681] Starting a new job with PID 2681
