2019-05-09 13:51:51,221 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:51,772 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:51,779 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:51,784 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:51,790 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,205 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,210 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,215 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,332 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,338 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,344 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,351 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,788 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,928 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,937 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,945 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,953 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,961 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,969 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,976 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,984 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:53,992 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,000 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,008 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,016 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,024 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,032 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,040 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,048 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,056 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,060 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,063 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,066 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,069 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,072 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,075 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,078 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,081 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,084 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,087 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,090 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,092 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,095 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,098 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,101 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,103 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,106 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,109 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,112 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,115 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,117 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,120 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,123 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,126 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,129 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,132 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:51:54,134 [salt.utils.decorators:82  ][ERROR   ][1953] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-05-09 13:52:52,346 [salt.utils.decorators:613 ][WARNING ][1953] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-05-09 13:52:57,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6075] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2019-05-09 13:52:57,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6075] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2019-05-09 13:52:57,263 [salt.utils.parsers:1051][WARNING ][1586] Minion received a SIGTERM. Exiting.
2019-05-09 13:52:58,441 [salt.cli.daemons :293 ][INFO    ][6133] Setting up the Salt Minion "ctl02.mcp-ovs-dpdk-ha.local"
2019-05-09 13:52:58,529 [salt.cli.daemons :82  ][INFO    ][6133] Starting up the Salt Minion
2019-05-09 13:52:58,529 [salt.utils.event :1017][INFO    ][6133] Starting pull socket on /var/run/salt/minion/minion_event_3a65c28a93_pull.ipc
2019-05-09 13:52:59,180 [salt.minion      :976 ][INFO    ][6133] Creating minion process manager
2019-05-09 13:53:01,304 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6133] Executing command ['date', '+%z'] in directory '/root'
2019-05-09 13:53:01,324 [salt.utils.schedule:568 ][INFO    ][6133] Updating job settings for scheduled job: __mine_interval
2019-05-09 13:53:01,326 [salt.minion      :1108][INFO    ][6133] Added mine.update to scheduler
2019-05-09 13:53:01,330 [salt.minion      :1975][INFO    ][6133] Minion is starting as user 'root'
2019-05-09 13:53:01,346 [salt.minion      :2336][INFO    ][6133] Minion is ready to receive requests!
2019-05-09 13:53:01,348 [salt.minion      :1308][INFO    ][6133] User sudo_ubuntu Executing command state.apply with jid 20190509135259465015
2019-05-09 13:53:01,360 [salt.minion      :1432][INFO    ][6222] Starting a new job with PID 6222
2019-05-09 13:53:06,970 [salt.state       :915 ][INFO    ][6222] Loading fresh modules for state activity
2019-05-09 13:53:07,216 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2019-05-09 13:53:07,254 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2019-05-09 13:53:07,418 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2019-05-09 13:53:07,531 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2019-05-09 13:53:07,651 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2019-05-09 13:53:07,770 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2019-05-09 13:53:07,924 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2019-05-09 13:53:09,195 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2019-05-09 13:53:09,471 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2019-05-09 13:53:09,656 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2019-05-09 13:53:09,777 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2019-05-09 13:53:09,882 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2019-05-09 13:53:10,074 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2019-05-09 13:53:10,108 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2019-05-09 13:53:10,220 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2019-05-09 13:53:10,336 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2019-05-09 13:53:10,446 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2019-05-09 13:53:10,648 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2019-05-09 13:53:10,769 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/job.sls'
2019-05-09 13:53:10,887 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2019-05-09 13:53:12,240 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2019-05-09 13:53:12,435 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2019-05-09 13:53:12,628 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2019-05-09 13:53:12,761 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2019-05-09 13:53:12,876 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2019-05-09 13:53:13,000 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2019-05-09 13:53:13,110 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2019-05-09 13:53:13,220 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2019-05-09 13:53:13,386 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2019-05-09 13:53:13,614 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2019-05-09 13:53:14,848 [salt.minion      :1308][INFO    ][6133] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509135314835853
2019-05-09 13:53:14,853 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2019-05-09 13:53:14,881 [salt.minion      :1432][INFO    ][6291] Starting a new job with PID 6291
2019-05-09 13:53:14,918 [salt.minion      :1711][INFO    ][6291] Returning information for job: 20190509135314835853
2019-05-09 13:53:15,088 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2019-05-09 13:53:15,216 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2019-05-09 13:53:15,241 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2019-05-09 13:53:15,284 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2019-05-09 13:53:15,384 [salt.state       :1780][INFO    ][6222] Running state [/etc/environment] at time 13:53:15.384067
2019-05-09 13:53:15,385 [salt.state       :1813][INFO    ][6222] Executing state file.blockreplace for [/etc/environment]
2019-05-09 13:53:15,403 [salt.state       :300 ][INFO    ][6222] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2019-05-09 13:53:15,407 [salt.state       :1951][INFO    ][6222] Completed state [/etc/environment] at time 13:53:15.407286 duration_in_ms=23.219
2019-05-09 13:53:15,408 [salt.state       :1780][INFO    ][6222] Running state [/etc/profile.d] at time 13:53:15.408423
2019-05-09 13:53:15,409 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/profile.d]
2019-05-09 13:53:15,427 [salt.state       :300 ][INFO    ][6222] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2019-05-09 13:53:15,427 [salt.state       :1951][INFO    ][6222] Completed state [/etc/profile.d] at time 13:53:15.427803 duration_in_ms=19.379
2019-05-09 13:53:15,428 [salt.state       :1780][INFO    ][6222] Running state [/etc/bash.bashrc] at time 13:53:15.428374
2019-05-09 13:53:15,428 [salt.state       :1813][INFO    ][6222] Executing state file.blockreplace for [/etc/bash.bashrc]
2019-05-09 13:53:16,813 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['git', '--version'] in directory '/root'
2019-05-09 13:53:17,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2019-05-09 13:53:17,384 [salt.state       :300 ][INFO    ][6222] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-05-09 13:53:17,385 [salt.state       :1951][INFO    ][6222] Completed state [/etc/bash.bashrc] at time 13:53:17.385379 duration_in_ms=1957.003
2019-05-09 13:53:17,386 [salt.state       :1780][INFO    ][6222] Running state [/etc/profile] at time 13:53:17.386253
2019-05-09 13:53:17,387 [salt.state       :1813][INFO    ][6222] Executing state file.blockreplace for [/etc/profile]
2019-05-09 13:53:17,402 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'test -f /etc/profile' in directory '/root'
2019-05-09 13:53:17,438 [salt.state       :300 ][INFO    ][6222] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-05-09 13:53:17,439 [salt.state       :1951][INFO    ][6222] Completed state [/etc/profile] at time 13:53:17.439562 duration_in_ms=53.309
2019-05-09 13:53:17,440 [salt.state       :1780][INFO    ][6222] Running state [/etc/login.defs] at time 13:53:17.440378
2019-05-09 13:53:17,441 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/login.defs]
2019-05-09 13:53:17,491 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2019-05-09 13:53:17,716 [salt.state       :300 ][INFO    ][6222] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2019-05-09 13:53:17,717 [salt.state       :1951][INFO    ][6222] Completed state [/etc/login.defs] at time 13:53:17.717614 duration_in_ms=277.237
2019-05-09 13:53:17,725 [salt.state       :1780][INFO    ][6222] Running state [at] at time 13:53:17.725671
2019-05-09 13:53:17,725 [salt.state       :1813][INFO    ][6222] Executing state pkg.installed for [at]
2019-05-09 13:53:17,726 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:53:18,021 [salt.state       :300 ][INFO    ][6222] All specified packages are already installed
2019-05-09 13:53:18,022 [salt.state       :1951][INFO    ][6222] Completed state [at] at time 13:53:18.022106 duration_in_ms=296.435
2019-05-09 13:53:18,024 [salt.state       :1780][INFO    ][6222] Running state [atd] at time 13:53:18.024387
2019-05-09 13:53:18,024 [salt.state       :1813][INFO    ][6222] Executing state service.running for [atd]
2019-05-09 13:53:18,025 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2019-05-09 13:53:18,048 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2019-05-09 13:53:18,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2019-05-09 13:53:18,070 [salt.state       :300 ][INFO    ][6222] The service atd is already running
2019-05-09 13:53:18,070 [salt.state       :1951][INFO    ][6222] Completed state [atd] at time 13:53:18.070901 duration_in_ms=46.514
2019-05-09 13:53:18,073 [salt.state       :1780][INFO    ][6222] Running state [cron] at time 13:53:18.073409
2019-05-09 13:53:18,073 [salt.state       :1813][INFO    ][6222] Executing state pkg.installed for [cron]
2019-05-09 13:53:18,082 [salt.state       :300 ][INFO    ][6222] All specified packages are already installed
2019-05-09 13:53:18,082 [salt.state       :1951][INFO    ][6222] Completed state [cron] at time 13:53:18.082943 duration_in_ms=9.534
2019-05-09 13:53:18,083 [salt.state       :1780][INFO    ][6222] Running state [/etc/at.allow] at time 13:53:18.083882
2019-05-09 13:53:18,084 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/at.allow]
2019-05-09 13:53:18,104 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2019-05-09 13:53:18,113 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:18,114 [salt.state       :1951][INFO    ][6222] Completed state [/etc/at.allow] at time 13:53:18.114159 duration_in_ms=30.277
2019-05-09 13:53:18,114 [salt.state       :1780][INFO    ][6222] Running state [/etc/at.deny] at time 13:53:18.114367
2019-05-09 13:53:18,114 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/at.deny]
2019-05-09 13:53:18,115 [salt.state       :300 ][INFO    ][6222] {'removed': '/etc/at.deny'}
2019-05-09 13:53:18,115 [salt.state       :1951][INFO    ][6222] Completed state [/etc/at.deny] at time 13:53:18.115158 duration_in_ms=0.791
2019-05-09 13:53:18,116 [salt.state       :1780][INFO    ][6222] Running state [cron] at time 13:53:18.116423
2019-05-09 13:53:18,116 [salt.state       :1813][INFO    ][6222] Executing state service.running for [cron]
2019-05-09 13:53:18,117 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2019-05-09 13:53:18,129 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2019-05-09 13:53:18,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2019-05-09 13:53:18,150 [salt.state       :300 ][INFO    ][6222] The service cron is already running
2019-05-09 13:53:18,150 [salt.state       :1951][INFO    ][6222] Completed state [cron] at time 13:53:18.150575 duration_in_ms=34.152
2019-05-09 13:53:18,152 [salt.state       :1780][INFO    ][6222] Running state [/etc/cron.allow] at time 13:53:18.152273
2019-05-09 13:53:18,152 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/cron.allow]
2019-05-09 13:53:18,178 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:18,178 [salt.state       :1951][INFO    ][6222] Completed state [/etc/cron.allow] at time 13:53:18.178611 duration_in_ms=26.338
2019-05-09 13:53:18,178 [salt.state       :1780][INFO    ][6222] Running state [/etc/cron.deny] at time 13:53:18.178862
2019-05-09 13:53:18,179 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/cron.deny]
2019-05-09 13:53:18,179 [salt.state       :300 ][INFO    ][6222] File /etc/cron.deny is not present
2019-05-09 13:53:18,179 [salt.state       :1951][INFO    ][6222] Completed state [/etc/cron.deny] at time 13:53:18.179587 duration_in_ms=0.725
2019-05-09 13:53:18,180 [salt.state       :1780][INFO    ][6222] Running state [/etc/crontab] at time 13:53:18.180647
2019-05-09 13:53:18,180 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/crontab]
2019-05-09 13:53:18,181 [salt.state       :300 ][INFO    ][6222] {'mode': '0600'}
2019-05-09 13:53:18,181 [salt.state       :1951][INFO    ][6222] Completed state [/etc/crontab] at time 13:53:18.181918 duration_in_ms=1.271
2019-05-09 13:53:18,183 [salt.state       :1780][INFO    ][6222] Running state [/etc/cron.d] at time 13:53:18.182991
2019-05-09 13:53:18,183 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/cron.d]
2019-05-09 13:53:18,184 [salt.state       :300 ][INFO    ][6222] {'mode': '0600'}
2019-05-09 13:53:18,184 [salt.state       :1951][INFO    ][6222] Completed state [/etc/cron.d] at time 13:53:18.184892 duration_in_ms=1.901
2019-05-09 13:53:18,186 [salt.state       :1780][INFO    ][6222] Running state [/etc/cron.daily] at time 13:53:18.185955
2019-05-09 13:53:18,186 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/cron.daily]
2019-05-09 13:53:18,187 [salt.state       :300 ][INFO    ][6222] {'mode': '0600'}
2019-05-09 13:53:18,188 [salt.state       :1951][INFO    ][6222] Completed state [/etc/cron.daily] at time 13:53:18.188137 duration_in_ms=2.182
2019-05-09 13:53:18,189 [salt.state       :1780][INFO    ][6222] Running state [/etc/cron.hourly] at time 13:53:18.189177
2019-05-09 13:53:18,189 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/cron.hourly]
2019-05-09 13:53:18,190 [salt.state       :300 ][INFO    ][6222] {'mode': '0600'}
2019-05-09 13:53:18,191 [salt.state       :1951][INFO    ][6222] Completed state [/etc/cron.hourly] at time 13:53:18.191019 duration_in_ms=1.841
2019-05-09 13:53:18,192 [salt.state       :1780][INFO    ][6222] Running state [/etc/cron.monthly] at time 13:53:18.192062
2019-05-09 13:53:18,192 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/cron.monthly]
2019-05-09 13:53:18,193 [salt.state       :300 ][INFO    ][6222] {'mode': '0600'}
2019-05-09 13:53:18,193 [salt.state       :1951][INFO    ][6222] Completed state [/etc/cron.monthly] at time 13:53:18.193550 duration_in_ms=1.488
2019-05-09 13:53:18,194 [salt.state       :1780][INFO    ][6222] Running state [/etc/cron.weekly] at time 13:53:18.194645
2019-05-09 13:53:18,194 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/cron.weekly]
2019-05-09 13:53:18,202 [salt.state       :300 ][INFO    ][6222] {'mode': '0600'}
2019-05-09 13:53:18,202 [salt.state       :1951][INFO    ][6222] Completed state [/etc/cron.weekly] at time 13:53:18.202341 duration_in_ms=7.696
2019-05-09 13:53:18,205 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 13:53:18.205831
2019-05-09 13:53:18,206 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2019-05-09 13:53:18,223 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2019-05-09 13:53:18,234 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:18,234 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 13:53:18.234886 duration_in_ms=29.055
2019-05-09 13:53:18,235 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 13:53:18.235095
2019-05-09 13:53:18,235 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2019-05-09 13:53:18,257 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:18,257 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 13:53:18.257208 duration_in_ms=22.113
2019-05-09 13:53:18,259 [salt.state       :1780][INFO    ][6222] Running state [linux_repo_prereq_pkgs] at time 13:53:18.259160
2019-05-09 13:53:18,259 [salt.state       :1813][INFO    ][6222] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2019-05-09 13:53:18,268 [salt.state       :300 ][INFO    ][6222] All specified packages are already installed
2019-05-09 13:53:18,268 [salt.state       :1951][INFO    ][6222] Completed state [linux_repo_prereq_pkgs] at time 13:53:18.268568 duration_in_ms=9.407
2019-05-09 13:53:18,268 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 13:53:18.268787
2019-05-09 13:53:18,268 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2019-05-09 13:53:18,269 [salt.state       :300 ][INFO    ][6222] File /etc/apt/apt.conf.d/99proxies-salt is not present
2019-05-09 13:53:18,269 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 13:53:18.269428 duration_in_ms=0.64
2019-05-09 13:53:18,269 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 13:53:18.269620
2019-05-09 13:53:18,269 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2019-05-09 13:53:18,270 [salt.state       :300 ][INFO    ][6222] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2019-05-09 13:53:18,270 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 13:53:18.270287 duration_in_ms=0.667
2019-05-09 13:53:18,270 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 13:53:18.270507
2019-05-09 13:53:18,270 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/apt/preferences.d/mirantis_openstack]
2019-05-09 13:53:18,270 [salt.state       :300 ][INFO    ][6222] File /etc/apt/preferences.d/mirantis_openstack is not present
2019-05-09 13:53:18,271 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 13:53:18.271135 duration_in_ms=0.629
2019-05-09 13:53:18,271 [salt.state       :1780][INFO    ][6222] Running state [echo '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' | base64 -d | apt-key add -] at time 13:53:18.271340
2019-05-09 13:53:18,271 [salt.state       :1813][INFO    ][6222] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-05-09 13:53:18,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-05-09 13:53:18,498 [salt.state       :300 ][INFO    ][6222] {'pid': 6335, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-05-09 13:53:18,498 [salt.state       :1951][INFO    ][6222] Completed state [echo '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' | base64 -d | apt-key add -] at time 13:53:18.498563 duration_in_ms=227.223
2019-05-09 13:53:18,503 [salt.state       :1780][INFO    ][6222] Running state [deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main] at time 13:53:18.503832
2019-05-09 13:53:18,504 [salt.state       :1813][INFO    ][6222] Executing state pkgrepo.managed for [deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main]
2019-05-09 13:53:18,667 [salt.state       :300 ][INFO    ][6222] {'repo': 'deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main'}
2019-05-09 13:53:18,668 [salt.state       :1951][INFO    ][6222] Completed state [deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main] at time 13:53:18.668294 duration_in_ms=164.462
2019-05-09 13:53:18,668 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports] at time 13:53:18.668579
2019-05-09 13:53:18,668 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports]
2019-05-09 13:53:18,669 [salt.state       :300 ][INFO    ][6222] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports is not present
2019-05-09 13:53:18,669 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports] at time 13:53:18.669468 duration_in_ms=0.89
2019-05-09 13:53:18,669 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/preferences.d/mirantis_openstack_backports] at time 13:53:18.669683
2019-05-09 13:53:18,669 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/apt/preferences.d/mirantis_openstack_backports]
2019-05-09 13:53:18,670 [salt.state       :300 ][INFO    ][6222] File /etc/apt/preferences.d/mirantis_openstack_backports is not present
2019-05-09 13:53:18,670 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/preferences.d/mirantis_openstack_backports] at time 13:53:18.670457 duration_in_ms=0.774
2019-05-09 13:53:18,670 [salt.state       :1780][INFO    ][6222] Running state [echo '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' | base64 -d | apt-key add -] at time 13:53:18.670684
2019-05-09 13:53:18,671 [salt.state       :1813][INFO    ][6222] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-05-09 13:53:18,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-05-09 13:53:18,929 [salt.state       :300 ][INFO    ][6222] {'pid': 6496, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-05-09 13:53:18,930 [salt.state       :1951][INFO    ][6222] Completed state [echo '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' | base64 -d | apt-key add -] at time 13:53:18.930579 duration_in_ms=259.893
2019-05-09 13:53:18,937 [salt.state       :1780][INFO    ][6222] Running state [deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main] at time 13:53:18.937484
2019-05-09 13:53:18,937 [salt.state       :1813][INFO    ][6222] Executing state pkgrepo.managed for [deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main]
2019-05-09 13:53:19,028 [salt.state       :300 ][INFO    ][6222] {'repo': 'deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main'}
2019-05-09 13:53:19,028 [salt.state       :1951][INFO    ][6222] Completed state [deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main] at time 13:53:19.028351 duration_in_ms=90.867
2019-05-09 13:53:19,028 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs] at time 13:53:19.028620
2019-05-09 13:53:19,028 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs]
2019-05-09 13:53:19,029 [salt.state       :300 ][INFO    ][6222] File /etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs is not present
2019-05-09 13:53:19,029 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs] at time 13:53:19.029424 duration_in_ms=0.804
2019-05-09 13:53:19,029 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/preferences.d/mcp_glusterfs] at time 13:53:19.029629
2019-05-09 13:53:19,029 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/apt/preferences.d/mcp_glusterfs]
2019-05-09 13:53:19,055 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2019-05-09 13:53:19,161 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:19,161 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/preferences.d/mcp_glusterfs] at time 13:53:19.161689 duration_in_ms=132.059
2019-05-09 13:53:19,161 [salt.state       :1780][INFO    ][6222] Running state [echo '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' | base64 -d | apt-key add -] at time 13:53:19.161942
2019-05-09 13:53:19,162 [salt.state       :1813][INFO    ][6222] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-05-09 13:53:19,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-05-09 13:53:19,304 [salt.state       :300 ][INFO    ][6222] {'pid': 6610, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-05-09 13:53:19,305 [salt.state       :1951][INFO    ][6222] Completed state [echo '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' | base64 -d | apt-key add -] at time 13:53:19.305358 duration_in_ms=143.416
2019-05-09 13:53:19,310 [salt.state       :1780][INFO    ][6222] Running state [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main] at time 13:53:19.310823
2019-05-09 13:53:19,311 [salt.state       :1813][INFO    ][6222] Executing state pkgrepo.managed for [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main]
2019-05-09 13:53:19,468 [salt.state       :300 ][INFO    ][6222] {'repo': 'deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main'}
2019-05-09 13:53:19,469 [salt.state       :1951][INFO    ][6222] Completed state [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main] at time 13:53:19.469097 duration_in_ms=158.274
2019-05-09 13:53:19,469 [salt.state       :1780][INFO    ][6222] Running state [pkg.refresh_db] at time 13:53:19.469339
2019-05-09 13:53:19,469 [salt.state       :1813][INFO    ][6222] Executing state module.run for [pkg.refresh_db]
2019-05-09 13:53:19,469 [salt.utils.decorators:613 ][WARNING ][6222] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-05-09 13:53:19,470 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 13:53:22,901 [salt.state       :300 ][INFO    ][6222] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial/main Translation-en': True, 'https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial/main amd64 Packages': True, 'https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial InRelease': True, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial InRelease': True, 'https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial/main amd64 Packages': True}}
2019-05-09 13:53:22,902 [salt.state       :1951][INFO    ][6222] Completed state [pkg.refresh_db] at time 13:53:22.902152 duration_in_ms=3432.812
2019-05-09 13:53:22,902 [salt.state       :1780][INFO    ][6222] Running state [linux_extra_packages_removed] at time 13:53:22.902836
2019-05-09 13:53:22,903 [salt.state       :1813][INFO    ][6222] Executing state pkg.removed for [linux_extra_packages_removed]
2019-05-09 13:53:22,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2019-05-09 13:53:24,610 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:53:24,665 [salt.state       :300 ][INFO    ][6222] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2019-05-09 13:53:24,726 [salt.state       :915 ][INFO    ][6222] Loading fresh modules for state activity
2019-05-09 13:53:24,807 [salt.state       :1951][INFO    ][6222] Completed state [linux_extra_packages_removed] at time 13:53:24.807222 duration_in_ms=1904.384
2019-05-09 13:53:24,819 [salt.state       :1780][INFO    ][6222] Running state [linux_extra_packages_latest] at time 13:53:24.818947
2019-05-09 13:53:24,819 [salt.state       :1813][INFO    ][6222] Executing state pkg.latest for [linux_extra_packages_latest]
2019-05-09 13:53:25,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2019-05-09 13:53:25,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-cache', '-q', 'policy', 'smartmontools'] in directory '/root'
2019-05-09 13:53:25,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-cache', '-q', 'policy', 'rsync'] in directory '/root'
2019-05-09 13:53:25,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-cache', '-q', 'policy', 'python-cryptography'] in directory '/root'
2019-05-09 13:53:25,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-cache', '-q', 'policy', 'python-pymysql'] in directory '/root'
2019-05-09 13:53:26,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 13:53:26,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado', 'smartmontools', 'python-pymysql', 'python-cryptography'] in directory '/root'
2019-05-09 13:53:34,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:53:34,382 [salt.state       :300 ][INFO    ][6222] Made the following changes:
'mail-reader' changed from 'absent' to '1'
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-cryptography' changed from '1.2.3-1ubuntu0.2' to '2.3-1~u16.04+mcp1'
'python-cffi-backend' changed from '1.5.2-1ubuntu1' to '1.11.5-3~u16.04+mcp'
'python-openssl' changed from '0.15.1-2ubuntu0.2' to '18.0.0-1~u16.04+mcp'
'smartmontools' changed from 'absent' to '6.4+svn4214-1'
'imap-client' changed from 'absent' to '1'
'mailx' changed from 'absent' to '1'
's-nail' changed from 'absent' to '14.8.6-1'
'python-ply-lex-3.5' changed from 'absent' to '1'
'python-idna' changed from '2.0-3' to '2.5-1~u16.04+mcp2'
'python-asn1crypto' changed from 'absent' to '0.22.0-1~u16.04+mcp2'
'python-pycparser' changed from 'absent' to '2.14+dfsg-2build1'
'python-ply-yacc-3.5' changed from 'absent' to '1'
'python-pymysql' changed from '0.7.2-1ubuntu1' to '0.8.0-1~u16.04+mcp1'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-ply' changed from 'absent' to '3.7-1'
'python-cffi' changed from 'absent' to '1.11.5-3~u16.04+mcp'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'
'python2.7-ply' changed from 'absent' to '1'

2019-05-09 13:53:34,408 [salt.state       :915 ][INFO    ][6222] Loading fresh modules for state activity
2019-05-09 13:53:34,450 [salt.state       :1951][INFO    ][6222] Completed state [linux_extra_packages_latest] at time 13:53:34.450669 duration_in_ms=9631.721
2019-05-09 13:53:34,459 [salt.state       :1780][INFO    ][6222] Running state [UTC] at time 13:53:34.458978
2019-05-09 13:53:34,459 [salt.state       :1813][INFO    ][6222] Executing state timezone.system for [UTC]
2019-05-09 13:53:34,465 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['timedatectl'] in directory '/root'
2019-05-09 13:53:34,515 [salt.state       :300 ][INFO    ][6222] Timezone UTC already set, UTC already set to UTC
2019-05-09 13:53:34,516 [salt.state       :1951][INFO    ][6222] Completed state [UTC] at time 13:53:34.516440 duration_in_ms=57.463
2019-05-09 13:53:34,519 [salt.state       :1780][INFO    ][6222] Running state [/etc/default/grub.d] at time 13:53:34.519797
2019-05-09 13:53:34,520 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/default/grub.d]
2019-05-09 13:53:34,527 [salt.state       :300 ][INFO    ][6222] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2019-05-09 13:53:34,527 [salt.state       :1951][INFO    ][6222] Completed state [/etc/default/grub.d] at time 13:53:34.527840 duration_in_ms=8.044
2019-05-09 13:53:34,528 [salt.state       :1780][INFO    ][6222] Running state [update-grub] at time 13:53:34.528909
2019-05-09 13:53:34,529 [salt.state       :1813][INFO    ][6222] Executing state cmd.wait for [update-grub]
2019-05-09 13:53:34,529 [salt.state       :300 ][INFO    ][6222] No changes made for update-grub
2019-05-09 13:53:34,530 [salt.state       :1951][INFO    ][6222] Completed state [update-grub] at time 13:53:34.530436 duration_in_ms=1.526
2019-05-09 13:53:34,533 [salt.state       :1780][INFO    ][6222] Running state [/boot/grub/grub.cfg] at time 13:53:34.533267
2019-05-09 13:53:34,533 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/boot/grub/grub.cfg]
2019-05-09 13:53:35,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2019-05-09 13:53:35,382 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:35,384 [salt.state       :300 ][INFO    ][6222] {'mode': '0400'}
2019-05-09 13:53:35,385 [salt.state       :1951][INFO    ][6222] Completed state [/boot/grub/grub.cfg] at time 13:53:35.384927 duration_in_ms=851.66
2019-05-09 13:53:35,385 [salt.state       :1780][INFO    ][6222] Running state [nf_conntrack] at time 13:53:35.385453
2019-05-09 13:53:35,385 [salt.state       :1813][INFO    ][6222] Executing state kmod.present for [nf_conntrack]
2019-05-09 13:53:35,386 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'lsmod' in directory '/root'
2019-05-09 13:53:35,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'lsmod' in directory '/root'
2019-05-09 13:53:35,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'modprobe nf_conntrack' in directory '/root'
2019-05-09 13:53:35,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'lsmod' in directory '/root'
2019-05-09 13:53:36,025 [salt.state       :300 ][INFO    ][6222] {'nf_conntrack': 'loaded'}
2019-05-09 13:53:36,026 [salt.state       :1951][INFO    ][6222] Completed state [nf_conntrack] at time 13:53:36.026694 duration_in_ms=641.24
2019-05-09 13:53:36,027 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d] at time 13:53:36.027227
2019-05-09 13:53:36,027 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/modprobe.d]
2019-05-09 13:53:36,028 [salt.state       :300 ][INFO    ][6222] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2019-05-09 13:53:36,028 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d] at time 13:53:36.028918 duration_in_ms=1.691
2019-05-09 13:53:36,031 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/hfsplus.conf] at time 13:53:36.031365
2019-05-09 13:53:36,031 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2019-05-09 13:53:36,052 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2019-05-09 13:53:36,182 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:36,182 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/hfsplus.conf] at time 13:53:36.182860 duration_in_ms=151.494
2019-05-09 13:53:36,184 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/rds.conf] at time 13:53:36.184766
2019-05-09 13:53:36,185 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2019-05-09 13:53:36,310 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:36,310 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/rds.conf] at time 13:53:36.310864 duration_in_ms=126.097
2019-05-09 13:53:36,312 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/cramfs.conf] at time 13:53:36.312349
2019-05-09 13:53:36,312 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2019-05-09 13:53:36,578 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:36,578 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/cramfs.conf] at time 13:53:36.578829 duration_in_ms=266.479
2019-05-09 13:53:36,580 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/freevxfs.conf] at time 13:53:36.580345
2019-05-09 13:53:36,580 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2019-05-09 13:53:36,711 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:36,711 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/freevxfs.conf] at time 13:53:36.711333 duration_in_ms=130.987
2019-05-09 13:53:36,712 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/hfs.conf] at time 13:53:36.712957
2019-05-09 13:53:36,713 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2019-05-09 13:53:36,842 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:36,842 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/hfs.conf] at time 13:53:36.842335 duration_in_ms=129.377
2019-05-09 13:53:36,843 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/squashfs.conf] at time 13:53:36.843878
2019-05-09 13:53:36,844 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2019-05-09 13:53:36,974 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:36,974 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/squashfs.conf] at time 13:53:36.974257 duration_in_ms=130.378
2019-05-09 13:53:36,975 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/udf.conf] at time 13:53:36.975733
2019-05-09 13:53:36,976 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2019-05-09 13:53:37,097 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:37,098 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/udf.conf] at time 13:53:37.098217 duration_in_ms=122.484
2019-05-09 13:53:37,099 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/vfat.conf] at time 13:53:37.099692
2019-05-09 13:53:37,099 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2019-05-09 13:53:38,426 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:38,426 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/vfat.conf] at time 13:53:38.426795 duration_in_ms=1327.103
2019-05-09 13:53:38,428 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/sctp.conf] at time 13:53:38.428395
2019-05-09 13:53:38,428 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2019-05-09 13:53:38,609 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:38,609 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/sctp.conf] at time 13:53:38.609368 duration_in_ms=180.973
2019-05-09 13:53:38,610 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/jffs2.conf] at time 13:53:38.610954
2019-05-09 13:53:38,611 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2019-05-09 13:53:38,752 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:38,753 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/jffs2.conf] at time 13:53:38.753275 duration_in_ms=142.319
2019-05-09 13:53:38,755 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/tipc.conf] at time 13:53:38.755135
2019-05-09 13:53:38,755 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2019-05-09 13:53:38,879 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:38,879 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/tipc.conf] at time 13:53:38.879518 duration_in_ms=124.383
2019-05-09 13:53:38,880 [salt.state       :1780][INFO    ][6222] Running state [/etc/modprobe.d/dccp.conf] at time 13:53:38.880962
2019-05-09 13:53:38,881 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2019-05-09 13:53:39,009 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:39,009 [salt.state       :1951][INFO    ][6222] Completed state [/etc/modprobe.d/dccp.conf] at time 13:53:39.009894 duration_in_ms=128.93
2019-05-09 13:53:39,010 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_congestion_control] at time 13:53:39.010195
2019-05-09 13:53:39,010 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2019-05-09 13:53:39,011 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2019-05-09 13:53:39,039 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_congestion_control': 'yeah'}
2019-05-09 13:53:39,040 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_congestion_control] at time 13:53:39.040065 duration_in_ms=29.869
2019-05-09 13:53:39,040 [salt.state       :1780][INFO    ][6222] Running state [net.core.netdev_budget] at time 13:53:39.040509
2019-05-09 13:53:39,040 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.core.netdev_budget]
2019-05-09 13:53:39,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.core.netdev_budget="600"' in directory '/root'
2019-05-09 13:53:39,053 [salt.state       :300 ][INFO    ][6222] {'net.core.netdev_budget': 600}
2019-05-09 13:53:39,054 [salt.state       :1951][INFO    ][6222] Completed state [net.core.netdev_budget] at time 13:53:39.053927 duration_in_ms=13.418
2019-05-09 13:53:39,054 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_slow_start_after_idle] at time 13:53:39.054345
2019-05-09 13:53:39,054 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2019-05-09 13:53:39,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2019-05-09 13:53:39,068 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_slow_start_after_idle': 0}
2019-05-09 13:53:39,068 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 13:53:39.068578 duration_in_ms=14.232
2019-05-09 13:53:39,069 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 13:53:39.068985
2019-05-09 13:53:39,069 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2019-05-09 13:53:39,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2019-05-09 13:53:39,085 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2019-05-09 13:53:39,085 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 13:53:39.085678 duration_in_ms=16.692
2019-05-09 13:53:39,086 [salt.state       :1780][INFO    ][6222] Running state [net.nf_conntrack_max] at time 13:53:39.086086
2019-05-09 13:53:39,086 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.nf_conntrack_max]
2019-05-09 13:53:39,087 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2019-05-09 13:53:39,100 [salt.state       :300 ][INFO    ][6222] {'net.nf_conntrack_max': 1048576}
2019-05-09 13:53:39,100 [salt.state       :1951][INFO    ][6222] Completed state [net.nf_conntrack_max] at time 13:53:39.100497 duration_in_ms=14.41
2019-05-09 13:53:39,100 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 13:53:39.100867
2019-05-09 13:53:39,101 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2019-05-09 13:53:39,112 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2019-05-09 13:53:39,127 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2019-05-09 13:53:39,127 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 13:53:39.127864 duration_in_ms=26.995
2019-05-09 13:53:39,128 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.default.log_martians] at time 13:53:39.128265
2019-05-09 13:53:39,128 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2019-05-09 13:53:39,129 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2019-05-09 13:53:39,140 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.default.log_martians': 1}
2019-05-09 13:53:39,141 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.default.log_martians] at time 13:53:39.141202 duration_in_ms=12.937
2019-05-09 13:53:39,141 [salt.state       :1780][INFO    ][6222] Running state [net.core.somaxconn] at time 13:53:39.141589
2019-05-09 13:53:39,141 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.core.somaxconn]
2019-05-09 13:53:39,143 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2019-05-09 13:53:39,153 [salt.state       :300 ][INFO    ][6222] {'net.core.somaxconn': 4096}
2019-05-09 13:53:39,153 [salt.state       :1951][INFO    ][6222] Completed state [net.core.somaxconn] at time 13:53:39.153629 duration_in_ms=12.039
2019-05-09 13:53:39,154 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.all.send_redirects] at time 13:53:39.153992
2019-05-09 13:53:39,154 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2019-05-09 13:53:39,155 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2019-05-09 13:53:39,165 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.all.send_redirects': 0}
2019-05-09 13:53:39,166 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.all.send_redirects] at time 13:53:39.166127 duration_in_ms=12.134
2019-05-09 13:53:39,166 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_tw_reuse] at time 13:53:39.166558
2019-05-09 13:53:39,166 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2019-05-09 13:53:39,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2019-05-09 13:53:39,178 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_tw_reuse': 1}
2019-05-09 13:53:39,178 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_tw_reuse] at time 13:53:39.178403 duration_in_ms=11.845
2019-05-09 13:53:39,178 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.default.rp_filter] at time 13:53:39.178817
2019-05-09 13:53:39,179 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2019-05-09 13:53:39,180 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2019-05-09 13:53:39,190 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.default.rp_filter': 1}
2019-05-09 13:53:39,191 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.default.rp_filter] at time 13:53:39.191186 duration_in_ms=12.369
2019-05-09 13:53:39,191 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_fin_timeout] at time 13:53:39.191555
2019-05-09 13:53:39,191 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2019-05-09 13:53:39,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2019-05-09 13:53:39,202 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_fin_timeout': 30}
2019-05-09 13:53:39,203 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_fin_timeout] at time 13:53:39.203235 duration_in_ms=11.679
2019-05-09 13:53:39,203 [salt.state       :1780][INFO    ][6222] Running state [net.core.netdev_budget_usecs] at time 13:53:39.203591
2019-05-09 13:53:39,203 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.core.netdev_budget_usecs]
2019-05-09 13:53:39,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.core.netdev_budget_usecs="5000"' in directory '/root'
2019-05-09 13:53:39,215 [salt.state       :300 ][INFO    ][6222] {'net.core.netdev_budget_usecs': 5000}
2019-05-09 13:53:39,215 [salt.state       :1951][INFO    ][6222] Completed state [net.core.netdev_budget_usecs] at time 13:53:39.215517 duration_in_ms=11.926
2019-05-09 13:53:39,215 [salt.state       :1780][INFO    ][6222] Running state [kernel.panic] at time 13:53:39.215862
2019-05-09 13:53:39,216 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [kernel.panic]
2019-05-09 13:53:39,217 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2019-05-09 13:53:39,227 [salt.state       :300 ][INFO    ][6222] {'kernel.panic': 60}
2019-05-09 13:53:39,227 [salt.state       :1951][INFO    ][6222] Completed state [kernel.panic] at time 13:53:39.227462 duration_in_ms=11.6
2019-05-09 13:53:39,227 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_keepalive_probes] at time 13:53:39.227815
2019-05-09 13:53:39,228 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2019-05-09 13:53:39,229 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2019-05-09 13:53:39,238 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_keepalive_probes': 8}
2019-05-09 13:53:39,239 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_keepalive_probes] at time 13:53:39.239310 duration_in_ms=11.494
2019-05-09 13:53:39,239 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.all.log_martians] at time 13:53:39.239673
2019-05-09 13:53:39,240 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2019-05-09 13:53:39,240 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2019-05-09 13:53:39,250 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.all.log_martians': 1}
2019-05-09 13:53:39,251 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.all.log_martians] at time 13:53:39.251156 duration_in_ms=11.483
2019-05-09 13:53:39,251 [salt.state       :1780][INFO    ][6222] Running state [fs.suid_dumpable] at time 13:53:39.251519
2019-05-09 13:53:39,251 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [fs.suid_dumpable]
2019-05-09 13:53:39,252 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2019-05-09 13:53:39,262 [salt.state       :300 ][INFO    ][6222] {'fs.suid_dumpable': 0}
2019-05-09 13:53:39,262 [salt.state       :1951][INFO    ][6222] Completed state [fs.suid_dumpable] at time 13:53:39.262852 duration_in_ms=11.332
2019-05-09 13:53:39,263 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.default.accept_redirects] at time 13:53:39.263229
2019-05-09 13:53:39,263 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2019-05-09 13:53:39,264 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2019-05-09 13:53:39,274 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.default.accept_redirects': 0}
2019-05-09 13:53:39,274 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.default.accept_redirects] at time 13:53:39.274629 duration_in_ms=11.399
2019-05-09 13:53:39,275 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.default.secure_redirects] at time 13:53:39.275005
2019-05-09 13:53:39,275 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2019-05-09 13:53:39,276 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2019-05-09 13:53:39,286 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.default.secure_redirects': 0}
2019-05-09 13:53:39,286 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.default.secure_redirects] at time 13:53:39.286922 duration_in_ms=11.917
2019-05-09 13:53:39,287 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.default.accept_source_route] at time 13:53:39.287278
2019-05-09 13:53:39,287 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2019-05-09 13:53:39,288 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2019-05-09 13:53:39,299 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.default.accept_source_route': 0}
2019-05-09 13:53:39,299 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.default.accept_source_route] at time 13:53:39.299636 duration_in_ms=12.358
2019-05-09 13:53:39,300 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_keepalive_intvl] at time 13:53:39.300011
2019-05-09 13:53:39,300 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2019-05-09 13:53:39,301 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2019-05-09 13:53:39,312 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_keepalive_intvl': 3}
2019-05-09 13:53:39,313 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_keepalive_intvl] at time 13:53:39.313070 duration_in_ms=13.059
2019-05-09 13:53:39,313 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_keepalive_time] at time 13:53:39.313428
2019-05-09 13:53:39,313 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2019-05-09 13:53:39,314 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2019-05-09 13:53:39,325 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_keepalive_time': 30}
2019-05-09 13:53:39,325 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_keepalive_time] at time 13:53:39.325687 duration_in_ms=12.258
2019-05-09 13:53:39,326 [salt.state       :1780][INFO    ][6222] Running state [kernel.randomize_va_space] at time 13:53:39.326077
2019-05-09 13:53:39,326 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [kernel.randomize_va_space]
2019-05-09 13:53:39,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2019-05-09 13:53:39,337 [salt.state       :300 ][INFO    ][6222] {'kernel.randomize_va_space': 2}
2019-05-09 13:53:39,338 [salt.state       :1951][INFO    ][6222] Completed state [kernel.randomize_va_space] at time 13:53:39.338310 duration_in_ms=12.232
2019-05-09 13:53:39,338 [salt.state       :1780][INFO    ][6222] Running state [fs.file-max] at time 13:53:39.338702
2019-05-09 13:53:39,339 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [fs.file-max]
2019-05-09 13:53:39,340 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2019-05-09 13:53:39,350 [salt.state       :300 ][INFO    ][6222] {'fs.file-max': 124165}
2019-05-09 13:53:39,350 [salt.state       :1951][INFO    ][6222] Completed state [fs.file-max] at time 13:53:39.350622 duration_in_ms=11.92
2019-05-09 13:53:39,351 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_syncookies] at time 13:53:39.350997
2019-05-09 13:53:39,351 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2019-05-09 13:53:39,352 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2019-05-09 13:53:39,362 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_syncookies': 1}
2019-05-09 13:53:39,362 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_syncookies] at time 13:53:39.362792 duration_in_ms=11.795
2019-05-09 13:53:39,363 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_max_syn_backlog] at time 13:53:39.363183
2019-05-09 13:53:39,363 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2019-05-09 13:53:39,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2019-05-09 13:53:39,379 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_max_syn_backlog': 8192}
2019-05-09 13:53:39,379 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_max_syn_backlog] at time 13:53:39.379891 duration_in_ms=16.708
2019-05-09 13:53:39,380 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.all.rp_filter] at time 13:53:39.380257
2019-05-09 13:53:39,380 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2019-05-09 13:53:39,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2019-05-09 13:53:39,392 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.all.rp_filter': 1}
2019-05-09 13:53:39,393 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.all.rp_filter] at time 13:53:39.393319 duration_in_ms=13.061
2019-05-09 13:53:39,393 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.all.accept_source_route] at time 13:53:39.393697
2019-05-09 13:53:39,394 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2019-05-09 13:53:39,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2019-05-09 13:53:39,406 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.all.accept_source_route': 0}
2019-05-09 13:53:39,407 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.all.accept_source_route] at time 13:53:39.407041 duration_in_ms=13.344
2019-05-09 13:53:39,407 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.tcp_retries2] at time 13:53:39.407403
2019-05-09 13:53:39,407 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2019-05-09 13:53:39,408 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2019-05-09 13:53:39,419 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.tcp_retries2': 5}
2019-05-09 13:53:39,420 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.tcp_retries2] at time 13:53:39.419986 duration_in_ms=12.582
2019-05-09 13:53:39,420 [salt.state       :1780][INFO    ][6222] Running state [net.core.netdev_max_backlog] at time 13:53:39.420342
2019-05-09 13:53:39,420 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.core.netdev_max_backlog]
2019-05-09 13:53:39,421 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2019-05-09 13:53:39,432 [salt.state       :300 ][INFO    ][6222] {'net.core.netdev_max_backlog': 261144}
2019-05-09 13:53:39,433 [salt.state       :1951][INFO    ][6222] Completed state [net.core.netdev_max_backlog] at time 13:53:39.433015 duration_in_ms=12.673
2019-05-09 13:53:39,433 [salt.state       :1780][INFO    ][6222] Running state [vm.swappiness] at time 13:53:39.433393
2019-05-09 13:53:39,433 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [vm.swappiness]
2019-05-09 13:53:39,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2019-05-09 13:53:39,445 [salt.state       :300 ][INFO    ][6222] {'vm.swappiness': 10}
2019-05-09 13:53:39,445 [salt.state       :1951][INFO    ][6222] Completed state [vm.swappiness] at time 13:53:39.445721 duration_in_ms=12.328
2019-05-09 13:53:39,446 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.all.secure_redirects] at time 13:53:39.446098
2019-05-09 13:53:39,446 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2019-05-09 13:53:39,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2019-05-09 13:53:39,457 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.all.secure_redirects': 0}
2019-05-09 13:53:39,458 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.all.secure_redirects] at time 13:53:39.458033 duration_in_ms=11.935
2019-05-09 13:53:39,458 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.neigh.default.gc_thresh1] at time 13:53:39.458434
2019-05-09 13:53:39,458 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2019-05-09 13:53:39,459 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2019-05-09 13:53:39,469 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2019-05-09 13:53:39,470 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 13:53:39.470172 duration_in_ms=11.738
2019-05-09 13:53:39,470 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.neigh.default.gc_thresh2] at time 13:53:39.470592
2019-05-09 13:53:39,470 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2019-05-09 13:53:39,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2019-05-09 13:53:39,481 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2019-05-09 13:53:39,482 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 13:53:39.482241 duration_in_ms=11.649
2019-05-09 13:53:39,482 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.neigh.default.gc_thresh3] at time 13:53:39.482638
2019-05-09 13:53:39,482 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2019-05-09 13:53:39,483 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2019-05-09 13:53:39,495 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2019-05-09 13:53:39,495 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 13:53:39.495566 duration_in_ms=12.928
2019-05-09 13:53:39,495 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.default.send_redirects] at time 13:53:39.495932
2019-05-09 13:53:39,496 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2019-05-09 13:53:39,497 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2019-05-09 13:53:39,509 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.default.send_redirects': 0}
2019-05-09 13:53:39,509 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.default.send_redirects] at time 13:53:39.509514 duration_in_ms=13.582
2019-05-09 13:53:39,509 [salt.state       :1780][INFO    ][6222] Running state [net.ipv4.conf.all.accept_redirects] at time 13:53:39.509893
2019-05-09 13:53:39,510 [salt.state       :1813][INFO    ][6222] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2019-05-09 13:53:39,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2019-05-09 13:53:39,522 [salt.state       :300 ][INFO    ][6222] {'net.ipv4.conf.all.accept_redirects': 0}
2019-05-09 13:53:39,523 [salt.state       :1951][INFO    ][6222] Completed state [net.ipv4.conf.all.accept_redirects] at time 13:53:39.523324 duration_in_ms=13.431
2019-05-09 13:53:39,523 [salt.state       :1780][INFO    ][6222] Running state [linux_sysfs_package] at time 13:53:39.523710
2019-05-09 13:53:39,524 [salt.state       :1813][INFO    ][6222] Executing state pkg.installed for [linux_sysfs_package]
2019-05-09 13:53:39,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2019-05-09 13:53:39,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 13:53:41,203 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 13:53:41,224 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2019-05-09 13:53:44,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:53:44,639 [salt.state       :300 ][INFO    ][6222] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2019-05-09 13:53:44,666 [salt.state       :915 ][INFO    ][6222] Loading fresh modules for state activity
2019-05-09 13:53:44,706 [salt.state       :1951][INFO    ][6222] Completed state [linux_sysfs_package] at time 13:53:44.706605 duration_in_ms=5182.894
2019-05-09 13:53:44,712 [salt.state       :1780][INFO    ][6222] Running state [/etc/sysfs.d] at time 13:53:44.712464
2019-05-09 13:53:44,712 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/etc/sysfs.d]
2019-05-09 13:53:44,716 [salt.state       :300 ][INFO    ][6222] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2019-05-09 13:53:44,717 [salt.state       :1951][INFO    ][6222] Completed state [/etc/sysfs.d] at time 13:53:44.717106 duration_in_ms=4.642
2019-05-09 13:53:45,326 [salt.state       :1780][INFO    ][6222] Running state [ondemand] at time 13:53:45.326693
2019-05-09 13:53:45,327 [salt.state       :1813][INFO    ][6222] Executing state service.dead for [ondemand]
2019-05-09 13:53:45,328 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2019-05-09 13:53:45,343 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-05-09 13:53:45,355 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-05-09 13:53:45,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2019-05-09 13:53:45,414 [salt.minion      :1308][INFO    ][6133] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509135344910628
2019-05-09 13:53:45,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-05-09 13:53:45,427 [salt.minion      :1432][INFO    ][9430] Starting a new job with PID 9430
2019-05-09 13:53:45,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-05-09 13:53:45,444 [salt.minion      :1711][INFO    ][9430] Returning information for job: 20190509135344910628
2019-05-09 13:53:45,452 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-05-09 13:53:45,476 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2019-05-09 13:53:45,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-05-09 13:53:45,768 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'runlevel' in directory '/root'
2019-05-09 13:53:45,795 [salt.state       :300 ][INFO    ][6222] {'ondemand': True}
2019-05-09 13:53:45,796 [salt.state       :1951][INFO    ][6222] Completed state [ondemand] at time 13:53:45.795939 duration_in_ms=469.245
2019-05-09 13:53:45,798 [salt.state       :1780][INFO    ][6222] Running state [en_US.UTF-8] at time 13:53:45.798800
2019-05-09 13:53:45,799 [salt.state       :1813][INFO    ][6222] Executing state locale.present for [en_US.UTF-8]
2019-05-09 13:53:45,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'locale -a' in directory '/root'
2019-05-09 13:53:45,824 [salt.state       :300 ][INFO    ][6222] Locale en_US.UTF-8 is already present
2019-05-09 13:53:45,825 [salt.state       :1951][INFO    ][6222] Completed state [en_US.UTF-8] at time 13:53:45.825756 duration_in_ms=26.956
2019-05-09 13:53:45,833 [salt.state       :1780][INFO    ][6222] Running state [en_US.UTF-8] at time 13:53:45.833022
2019-05-09 13:53:45,833 [salt.state       :1813][INFO    ][6222] Executing state locale.system for [en_US.UTF-8]
2019-05-09 13:53:45,905 [salt.state       :300 ][INFO    ][6222] System locale en_US.UTF-8 already set
2019-05-09 13:53:45,905 [salt.state       :1951][INFO    ][6222] Completed state [en_US.UTF-8] at time 13:53:45.905832 duration_in_ms=72.809
2019-05-09 13:53:45,908 [salt.state       :1780][INFO    ][6222] Running state [glance] at time 13:53:45.908658
2019-05-09 13:53:45,909 [salt.state       :1813][INFO    ][6222] Executing state group.present for [glance]
2019-05-09 13:53:45,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['groupadd', '-g 302', '-r', 'glance'] in directory '/root'
2019-05-09 13:53:45,973 [salt.state       :300 ][INFO    ][6222] {'passwd': 'x', 'gid': 302, 'name': 'glance', 'members': []}
2019-05-09 13:53:45,974 [salt.state       :1951][INFO    ][6222] Completed state [glance] at time 13:53:45.974223 duration_in_ms=65.565
2019-05-09 13:53:45,975 [salt.state       :1780][INFO    ][6222] Running state [keystone] at time 13:53:45.975833
2019-05-09 13:53:45,976 [salt.state       :1813][INFO    ][6222] Executing state group.present for [keystone]
2019-05-09 13:53:45,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['groupadd', '-g 301', '-r', 'keystone'] in directory '/root'
2019-05-09 13:53:46,039 [salt.state       :300 ][INFO    ][6222] {'passwd': 'x', 'gid': 301, 'name': 'keystone', 'members': []}
2019-05-09 13:53:46,040 [salt.state       :1951][INFO    ][6222] Completed state [keystone] at time 13:53:46.040642 duration_in_ms=64.808
2019-05-09 13:53:46,045 [salt.state       :1780][INFO    ][6222] Running state [keystone] at time 13:53:46.045320
2019-05-09 13:53:46,046 [salt.state       :1813][INFO    ][6222] Executing state user.present for [keystone]
2019-05-09 13:53:46,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['useradd', '-s', '/bin/bash', '-u', '301', '-g', '301', '-m', '-d', '/var/lib/keystone', '-r', 'keystone'] in directory '/root'
2019-05-09 13:53:46,115 [salt.state       :300 ][INFO    ][6222] {'shell': '/bin/bash', 'workphone': '', 'uid': 301, 'passwd': 'x', 'roomnumber': '', 'groups': ['keystone'], 'home': '/var/lib/keystone', 'password': 'XXX-REDACTED-XXX', 'name': 'keystone', 'gid': 301, 'fullname': '', 'homephone': ''}
2019-05-09 13:53:46,116 [salt.state       :1951][INFO    ][6222] Completed state [keystone] at time 13:53:46.116481 duration_in_ms=71.163
2019-05-09 13:53:46,123 [salt.state       :1780][INFO    ][6222] Running state [/var/lib/keystone] at time 13:53:46.123743
2019-05-09 13:53:46,124 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/var/lib/keystone]
2019-05-09 13:53:46,128 [salt.state       :300 ][INFO    ][6222] {'mode': '0700'}
2019-05-09 13:53:46,128 [salt.state       :1951][INFO    ][6222] Completed state [/var/lib/keystone] at time 13:53:46.128434 duration_in_ms=4.692
2019-05-09 13:53:46,129 [salt.state       :1780][INFO    ][6222] Running state [/etc/sudoers.d/90-salt-user-keystone] at time 13:53:46.129084
2019-05-09 13:53:46,129 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/sudoers.d/90-salt-user-keystone]
2019-05-09 13:53:46,130 [salt.state       :300 ][INFO    ][6222] File /etc/sudoers.d/90-salt-user-keystone is not present
2019-05-09 13:53:46,131 [salt.state       :1951][INFO    ][6222] Completed state [/etc/sudoers.d/90-salt-user-keystone] at time 13:53:46.131199 duration_in_ms=2.115
2019-05-09 13:53:46,131 [salt.state       :1780][INFO    ][6222] Running state [barbican] at time 13:53:46.131776
2019-05-09 13:53:46,132 [salt.state       :1813][INFO    ][6222] Executing state group.present for [barbican]
2019-05-09 13:53:46,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['groupadd', 'barbican'] in directory '/root'
2019-05-09 13:53:46,185 [salt.state       :300 ][INFO    ][6222] {'passwd': 'x', 'gid': 1001, 'name': 'barbican', 'members': []}
2019-05-09 13:53:46,187 [salt.state       :1951][INFO    ][6222] Completed state [barbican] at time 13:53:46.187270 duration_in_ms=55.491
2019-05-09 13:53:46,197 [salt.state       :1780][INFO    ][6222] Running state [barbican] at time 13:53:46.197165
2019-05-09 13:53:46,198 [salt.state       :1813][INFO    ][6222] Executing state user.present for [barbican]
2019-05-09 13:53:46,202 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['useradd', '-s', '/bin/bash', '-g', '1001', '-m', '-d', '/var/lib/barbican', '-r', 'barbican'] in directory '/root'
2019-05-09 13:53:46,301 [salt.state       :300 ][INFO    ][6222] {'shell': '/bin/bash', 'workphone': '', 'uid': 999, 'passwd': 'x', 'roomnumber': '', 'groups': ['barbican'], 'home': '/var/lib/barbican', 'password': 'XXX-REDACTED-XXX', 'name': 'barbican', 'gid': 1001, 'fullname': '', 'homephone': ''}
2019-05-09 13:53:46,303 [salt.state       :1951][INFO    ][6222] Completed state [barbican] at time 13:53:46.302863 duration_in_ms=105.697
2019-05-09 13:53:46,315 [salt.state       :1780][INFO    ][6222] Running state [/var/lib/barbican] at time 13:53:46.314938
2019-05-09 13:53:46,316 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/var/lib/barbican]
2019-05-09 13:53:46,321 [salt.state       :300 ][INFO    ][6222] {'mode': '0700'}
2019-05-09 13:53:46,321 [salt.state       :1951][INFO    ][6222] Completed state [/var/lib/barbican] at time 13:53:46.321701 duration_in_ms=6.764
2019-05-09 13:53:46,322 [salt.state       :1780][INFO    ][6222] Running state [/etc/sudoers.d/90-salt-user-barbican] at time 13:53:46.322717
2019-05-09 13:53:46,323 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/sudoers.d/90-salt-user-barbican]
2019-05-09 13:53:46,325 [salt.state       :300 ][INFO    ][6222] File /etc/sudoers.d/90-salt-user-barbican is not present
2019-05-09 13:53:46,325 [salt.state       :1951][INFO    ][6222] Completed state [/etc/sudoers.d/90-salt-user-barbican] at time 13:53:46.325727 duration_in_ms=3.01
2019-05-09 13:53:46,326 [salt.state       :1780][INFO    ][6222] Running state [root] at time 13:53:46.326720
2019-05-09 13:53:46,327 [salt.state       :1813][INFO    ][6222] Executing state group.present for [root]
2019-05-09 13:53:46,329 [salt.state       :300 ][INFO    ][6222] Group root is present and up to date
2019-05-09 13:53:46,329 [salt.state       :1951][INFO    ][6222] Completed state [root] at time 13:53:46.329620 duration_in_ms=2.9
2019-05-09 13:53:46,336 [salt.state       :1780][INFO    ][6222] Running state [root] at time 13:53:46.335906
2019-05-09 13:53:46,336 [salt.state       :1813][INFO    ][6222] Executing state user.present for [root]
2019-05-09 13:53:46,340 [salt.state       :300 ][INFO    ][6222] User root is present and up to date
2019-05-09 13:53:46,341 [salt.state       :1951][INFO    ][6222] Completed state [root] at time 13:53:46.341520 duration_in_ms=5.615
2019-05-09 13:53:46,350 [salt.state       :1780][INFO    ][6222] Running state [/root] at time 13:53:46.349978
2019-05-09 13:53:46,351 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/root]
2019-05-09 13:53:46,353 [salt.state       :300 ][INFO    ][6222] Directory /root is in the correct state
Directory /root updated
2019-05-09 13:53:46,354 [salt.state       :1951][INFO    ][6222] Completed state [/root] at time 13:53:46.354256 duration_in_ms=4.279
2019-05-09 13:53:46,355 [salt.state       :1780][INFO    ][6222] Running state [/etc/sudoers.d/90-salt-user-root] at time 13:53:46.355134
2019-05-09 13:53:46,356 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2019-05-09 13:53:46,357 [salt.state       :300 ][INFO    ][6222] File /etc/sudoers.d/90-salt-user-root is not present
2019-05-09 13:53:46,357 [salt.state       :1951][INFO    ][6222] Completed state [/etc/sudoers.d/90-salt-user-root] at time 13:53:46.357799 duration_in_ms=2.664
2019-05-09 13:53:46,359 [salt.state       :1780][INFO    ][6222] Running state [glance] at time 13:53:46.359320
2019-05-09 13:53:46,360 [salt.state       :1813][INFO    ][6222] Executing state user.present for [glance]
2019-05-09 13:53:46,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['useradd', '-s', '/bin/false', '-u', '302', '-g', '302', '-m', '-d', '/var/lib/glance', '-r', 'glance'] in directory '/root'
2019-05-09 13:53:46,410 [salt.state       :300 ][INFO    ][6222] {'shell': '/bin/false', 'workphone': '', 'uid': 302, 'passwd': 'x', 'roomnumber': '', 'groups': ['glance'], 'home': '/var/lib/glance', 'password': 'XXX-REDACTED-XXX', 'name': 'glance', 'gid': 302, 'fullname': '', 'homephone': ''}
2019-05-09 13:53:46,411 [salt.state       :1951][INFO    ][6222] Completed state [glance] at time 13:53:46.411447 duration_in_ms=52.129
2019-05-09 13:53:46,418 [salt.state       :1780][INFO    ][6222] Running state [/var/lib/glance] at time 13:53:46.418400
2019-05-09 13:53:46,419 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/var/lib/glance]
2019-05-09 13:53:46,422 [salt.state       :300 ][INFO    ][6222] {'mode': '0700'}
2019-05-09 13:53:46,422 [salt.state       :1951][INFO    ][6222] Completed state [/var/lib/glance] at time 13:53:46.422860 duration_in_ms=4.461
2019-05-09 13:53:46,423 [salt.state       :1780][INFO    ][6222] Running state [/etc/sudoers.d/90-salt-user-glance] at time 13:53:46.423468
2019-05-09 13:53:46,424 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/sudoers.d/90-salt-user-glance]
2019-05-09 13:53:46,425 [salt.state       :300 ][INFO    ][6222] File /etc/sudoers.d/90-salt-user-glance is not present
2019-05-09 13:53:46,425 [salt.state       :1951][INFO    ][6222] Completed state [/etc/sudoers.d/90-salt-user-glance] at time 13:53:46.425456 duration_in_ms=1.988
2019-05-09 13:53:46,426 [salt.state       :1780][INFO    ][6222] Running state [ubuntu] at time 13:53:46.426076
2019-05-09 13:53:46,426 [salt.state       :1813][INFO    ][6222] Executing state group.present for [ubuntu]
2019-05-09 13:53:46,427 [salt.state       :300 ][INFO    ][6222] Group ubuntu is present and up to date
2019-05-09 13:53:46,428 [salt.state       :1951][INFO    ][6222] Completed state [ubuntu] at time 13:53:46.428016 duration_in_ms=1.94
2019-05-09 13:53:46,431 [salt.state       :1780][INFO    ][6222] Running state [ubuntu] at time 13:53:46.431604
2019-05-09 13:53:46,432 [salt.state       :1813][INFO    ][6222] Executing state user.present for [ubuntu]
2019-05-09 13:53:46,440 [salt.state       :300 ][INFO    ][6222] {'passwd': 'XXX-REDACTED-XXX'}
2019-05-09 13:53:46,441 [salt.state       :1951][INFO    ][6222] Completed state [ubuntu] at time 13:53:46.441200 duration_in_ms=9.595
2019-05-09 13:53:46,445 [salt.state       :1780][INFO    ][6222] Running state [/home/ubuntu] at time 13:53:46.445482
2019-05-09 13:53:46,446 [salt.state       :1813][INFO    ][6222] Executing state file.directory for [/home/ubuntu]
2019-05-09 13:53:46,448 [salt.state       :300 ][INFO    ][6222] {'mode': '0700'}
2019-05-09 13:53:46,449 [salt.state       :1951][INFO    ][6222] Completed state [/home/ubuntu] at time 13:53:46.449001 duration_in_ms=3.519
2019-05-09 13:53:46,452 [salt.state       :1780][INFO    ][6222] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 13:53:46.452845
2019-05-09 13:53:46,453 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2019-05-09 13:53:46,486 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2019-05-09 13:53:46,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.P4rya3' in directory '/root'
2019-05-09 13:53:46,558 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:46,559 [salt.state       :1951][INFO    ][6222] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 13:53:46.559113 duration_in_ms=106.267
2019-05-09 13:53:46,570 [salt.state       :1780][INFO    ][6222] Running state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:53:46.570345
2019-05-09 13:53:46,571 [salt.state       :1813][INFO    ][6222] Executing state cron.present for [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log]
2019-05-09 13:53:46,575 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'crontab -u keystone -l' in directory '/root'
2019-05-09 13:53:46,606 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'crontab -u keystone /tmp/__salt.tmp.AwqdQi' in directory '/root'
2019-05-09 13:53:46,634 [salt.state       :300 ][INFO    ][6222] {'keystone': '/var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log'}
2019-05-09 13:53:46,635 [salt.state       :1951][INFO    ][6222] Completed state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:53:46.635302 duration_in_ms=64.957
2019-05-09 13:53:46,646 [salt.state       :1780][INFO    ][6222] Running state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:53:46.644049
2019-05-09 13:53:46,651 [salt.state       :1813][INFO    ][6222] Executing state cron.present for [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log]
2019-05-09 13:53:46,655 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'crontab -u keystone -l' in directory '/root'
2019-05-09 13:53:46,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'crontab -u keystone /tmp/__salt.tmp.oy9_Jq' in directory '/root'
2019-05-09 13:53:46,721 [salt.state       :300 ][INFO    ][6222] {'keystone': '/var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log'}
2019-05-09 13:53:46,722 [salt.state       :1951][INFO    ][6222] Completed state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:53:46.722359 duration_in_ms=78.311
2019-05-09 13:53:46,723 [salt.state       :1780][INFO    ][6222] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 13:53:46.723425
2019-05-09 13:53:46,724 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2019-05-09 13:53:46,755 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2019-05-09 13:53:46,917 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:46,917 [salt.state       :1951][INFO    ][6222] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 13:53:46.917611 duration_in_ms=194.185
2019-05-09 13:53:46,918 [salt.state       :1780][INFO    ][6222] Running state [/etc/security/limits.d/90-salt-default.conf] at time 13:53:46.918263
2019-05-09 13:53:46,918 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2019-05-09 13:53:47,057 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:47,057 [salt.state       :1951][INFO    ][6222] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 13:53:47.057514 duration_in_ms=139.252
2019-05-09 13:53:47,057 [salt.state       :1780][INFO    ][6222] Running state [apt-daily.timer] at time 13:53:47.057824
2019-05-09 13:53:47,058 [salt.state       :1813][INFO    ][6222] Executing state service.dead for [apt-daily.timer]
2019-05-09 13:53:47,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2019-05-09 13:53:47,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,101 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,188 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:53:47,413 [salt.state       :300 ][INFO    ][6222] {'apt-daily.timer': True}
2019-05-09 13:53:47,414 [salt.state       :1951][INFO    ][6222] Completed state [apt-daily.timer] at time 13:53:47.414304 duration_in_ms=356.478
2019-05-09 13:53:47,415 [salt.state       :1780][INFO    ][6222] Running state [autofs] at time 13:53:47.414984
2019-05-09 13:53:47,415 [salt.state       :1813][INFO    ][6222] Executing state service.disabled for [autofs]
2019-05-09 13:53:47,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2019-05-09 13:53:47,437 [salt.state       :300 ][INFO    ][6222] The named service autofs is not available
2019-05-09 13:53:47,437 [salt.state       :1951][INFO    ][6222] Completed state [autofs] at time 13:53:47.437553 duration_in_ms=22.568
2019-05-09 13:53:47,438 [salt.state       :1780][INFO    ][6222] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 13:53:47.438005
2019-05-09 13:53:47,438 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2019-05-09 13:53:47,457 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2019-05-09 13:53:47,630 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:47,631 [salt.state       :1951][INFO    ][6222] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 13:53:47.631321 duration_in_ms=193.315
2019-05-09 13:53:47,636 [salt.state       :1780][INFO    ][6222] Running state [service.systemctl_reload] at time 13:53:47.636151
2019-05-09 13:53:47,636 [salt.state       :1813][INFO    ][6222] Executing state module.wait for [service.systemctl_reload]
2019-05-09 13:53:47,637 [salt.state       :300 ][INFO    ][6222] No changes made for service.systemctl_reload
2019-05-09 13:53:47,637 [salt.state       :1951][INFO    ][6222] Completed state [service.systemctl_reload] at time 13:53:47.637532 duration_in_ms=1.38
2019-05-09 13:53:47,638 [salt.state       :1780][INFO    ][6222] Running state [service.systemctl_reload] at time 13:53:47.637943
2019-05-09 13:53:47,638 [salt.state       :1813][INFO    ][6222] Executing state module.mod_watch for [service.systemctl_reload]
2019-05-09 13:53:47,639 [salt.utils.decorators:613 ][WARNING ][6222] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-05-09 13:53:47,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2019-05-09 13:53:47,808 [salt.state       :300 ][INFO    ][6222] {'ret': True}
2019-05-09 13:53:47,809 [salt.state       :1951][INFO    ][6222] Completed state [service.systemctl_reload] at time 13:53:47.809132 duration_in_ms=171.188
2019-05-09 13:53:47,810 [salt.state       :1780][INFO    ][6222] Running state [/etc/shadow] at time 13:53:47.810172
2019-05-09 13:53:47,810 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/shadow]
2019-05-09 13:53:47,811 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,814 [salt.state       :300 ][INFO    ][6222] File /etc/shadow exists with proper permissions. No changes made.
2019-05-09 13:53:47,814 [salt.state       :1951][INFO    ][6222] Completed state [/etc/shadow] at time 13:53:47.814325 duration_in_ms=4.153
2019-05-09 13:53:47,815 [salt.state       :1780][INFO    ][6222] Running state [/etc/gshadow] at time 13:53:47.815054
2019-05-09 13:53:47,815 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/gshadow]
2019-05-09 13:53:47,816 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,818 [salt.state       :300 ][INFO    ][6222] File /etc/gshadow exists with proper permissions. No changes made.
2019-05-09 13:53:47,818 [salt.state       :1951][INFO    ][6222] Completed state [/etc/gshadow] at time 13:53:47.818725 duration_in_ms=3.671
2019-05-09 13:53:47,819 [salt.state       :1780][INFO    ][6222] Running state [/etc/group-] at time 13:53:47.819100
2019-05-09 13:53:47,819 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/group-]
2019-05-09 13:53:47,820 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,822 [salt.state       :300 ][INFO    ][6222] File /etc/group- exists with proper permissions. No changes made.
2019-05-09 13:53:47,822 [salt.state       :1951][INFO    ][6222] Completed state [/etc/group-] at time 13:53:47.822647 duration_in_ms=3.547
2019-05-09 13:53:47,823 [salt.state       :1780][INFO    ][6222] Running state [/etc/group] at time 13:53:47.823382
2019-05-09 13:53:47,824 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/group]
2019-05-09 13:53:47,825 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,826 [salt.state       :300 ][INFO    ][6222] File /etc/group exists with proper permissions. No changes made.
2019-05-09 13:53:47,826 [salt.state       :1951][INFO    ][6222] Completed state [/etc/group] at time 13:53:47.826879 duration_in_ms=3.497
2019-05-09 13:53:47,827 [salt.state       :1780][INFO    ][6222] Running state [/etc/passwd-] at time 13:53:47.827602
2019-05-09 13:53:47,828 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/passwd-]
2019-05-09 13:53:47,829 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,831 [salt.state       :300 ][INFO    ][6222] File /etc/passwd- exists with proper permissions. No changes made.
2019-05-09 13:53:47,831 [salt.state       :1951][INFO    ][6222] Completed state [/etc/passwd-] at time 13:53:47.831612 duration_in_ms=4.01
2019-05-09 13:53:47,831 [salt.state       :1780][INFO    ][6222] Running state [/etc/passwd] at time 13:53:47.831942
2019-05-09 13:53:47,832 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/passwd]
2019-05-09 13:53:47,833 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,834 [salt.state       :300 ][INFO    ][6222] File /etc/passwd exists with proper permissions. No changes made.
2019-05-09 13:53:47,835 [salt.state       :1951][INFO    ][6222] Completed state [/etc/passwd] at time 13:53:47.835144 duration_in_ms=3.201
2019-05-09 13:53:47,835 [salt.state       :1780][INFO    ][6222] Running state [/etc/gshadow-] at time 13:53:47.835849
2019-05-09 13:53:47,836 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/gshadow-]
2019-05-09 13:53:47,837 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,839 [salt.state       :300 ][INFO    ][6222] File /etc/gshadow- exists with proper permissions. No changes made.
2019-05-09 13:53:47,839 [salt.state       :1951][INFO    ][6222] Completed state [/etc/gshadow-] at time 13:53:47.839836 duration_in_ms=3.986
2019-05-09 13:53:47,840 [salt.state       :1780][INFO    ][6222] Running state [/etc/shadow-] at time 13:53:47.840552
2019-05-09 13:53:47,841 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/shadow-]
2019-05-09 13:53:47,842 [salt.loaded.int.states.file:2298][WARNING ][6222] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:53:47,843 [salt.state       :300 ][INFO    ][6222] File /etc/shadow- exists with proper permissions. No changes made.
2019-05-09 13:53:47,844 [salt.state       :1951][INFO    ][6222] Completed state [/etc/shadow-] at time 13:53:47.844053 duration_in_ms=3.501
2019-05-09 13:53:47,844 [salt.state       :1780][INFO    ][6222] Running state [/etc/issue] at time 13:53:47.844838
2019-05-09 13:53:47,845 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/issue]
2019-05-09 13:53:47,850 [salt.state       :300 ][INFO    ][6222] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.6 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2019-05-09 13:53:47,851 [salt.state       :1951][INFO    ][6222] Completed state [/etc/issue] at time 13:53:47.851257 duration_in_ms=6.421
2019-05-09 13:53:47,851 [salt.state       :1780][INFO    ][6222] Running state [/etc/hostname] at time 13:53:47.851858
2019-05-09 13:53:47,852 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/hostname]
2019-05-09 13:53:47,882 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2019-05-09 13:53:47,902 [salt.state       :300 ][INFO    ][6222] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+ctl02

2019-05-09 13:53:47,903 [salt.state       :1951][INFO    ][6222] Completed state [/etc/hostname] at time 13:53:47.903173 duration_in_ms=51.316
2019-05-09 13:53:47,906 [salt.state       :1780][INFO    ][6222] Running state [hostname ctl02] at time 13:53:47.906462
2019-05-09 13:53:47,906 [salt.state       :1813][INFO    ][6222] Executing state cmd.run for [hostname ctl02]
2019-05-09 13:53:47,907 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'test "$(hostname)" = "ctl02"' in directory '/root'
2019-05-09 13:53:47,919 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'hostname ctl02' in directory '/root'
2019-05-09 13:53:47,929 [salt.state       :300 ][INFO    ][6222] {'pid': 9641, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-05-09 13:53:47,930 [salt.state       :1951][INFO    ][6222] Completed state [hostname ctl02] at time 13:53:47.930342 duration_in_ms=23.879
2019-05-09 13:53:47,932 [salt.state       :1780][INFO    ][6222] Running state [mdb02] at time 13:53:47.932108
2019-05-09 13:53:47,932 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb02]
2019-05-09 13:53:47,933 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb02'}
2019-05-09 13:53:47,934 [salt.state       :1951][INFO    ][6222] Completed state [mdb02] at time 13:53:47.934060 duration_in_ms=1.952
2019-05-09 13:53:47,935 [salt.state       :1780][INFO    ][6222] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 13:53:47.935069
2019-05-09 13:53:47,935 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,937 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,937 [salt.state       :1951][INFO    ][6222] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 13:53:47.937910 duration_in_ms=2.841
2019-05-09 13:53:47,938 [salt.state       :1780][INFO    ][6222] Running state [mdb03] at time 13:53:47.938820
2019-05-09 13:53:47,939 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb03]
2019-05-09 13:53:47,941 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb03'}
2019-05-09 13:53:47,941 [salt.state       :1951][INFO    ][6222] Completed state [mdb03] at time 13:53:47.941630 duration_in_ms=2.809
2019-05-09 13:53:47,942 [salt.state       :1780][INFO    ][6222] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 13:53:47.942490
2019-05-09 13:53:47,943 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,944 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,945 [salt.state       :1951][INFO    ][6222] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 13:53:47.945337 duration_in_ms=2.846
2019-05-09 13:53:47,946 [salt.state       :1780][INFO    ][6222] Running state [mdb01] at time 13:53:47.946206
2019-05-09 13:53:47,946 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb01]
2019-05-09 13:53:47,948 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb01'}
2019-05-09 13:53:47,949 [salt.state       :1951][INFO    ][6222] Completed state [mdb01] at time 13:53:47.949046 duration_in_ms=2.839
2019-05-09 13:53:47,949 [salt.state       :1780][INFO    ][6222] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 13:53:47.949867
2019-05-09 13:53:47,950 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,952 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,952 [salt.state       :1951][INFO    ][6222] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 13:53:47.952733 duration_in_ms=2.867
2019-05-09 13:53:47,953 [salt.state       :1780][INFO    ][6222] Running state [mdb] at time 13:53:47.953542
2019-05-09 13:53:47,954 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb]
2019-05-09 13:53:47,958 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb'}
2019-05-09 13:53:47,959 [salt.state       :1951][INFO    ][6222] Completed state [mdb] at time 13:53:47.958980 duration_in_ms=5.439
2019-05-09 13:53:47,959 [salt.state       :1780][INFO    ][6222] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 13:53:47.959824
2019-05-09 13:53:47,960 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,962 [salt.state       :300 ][INFO    ][6222] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,962 [salt.state       :1951][INFO    ][6222] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 13:53:47.962672 duration_in_ms=2.849
2019-05-09 13:53:47,963 [salt.state       :1780][INFO    ][6222] Running state [cfg01] at time 13:53:47.963494
2019-05-09 13:53:47,964 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cfg01]
2019-05-09 13:53:47,965 [salt.state       :300 ][INFO    ][6222] {'host': 'cfg01'}
2019-05-09 13:53:47,966 [salt.state       :1951][INFO    ][6222] Completed state [cfg01] at time 13:53:47.966327 duration_in_ms=2.833
2019-05-09 13:53:47,967 [salt.state       :1780][INFO    ][6222] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:53:47.967146
2019-05-09 13:53:47,967 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,973 [salt.state       :300 ][INFO    ][6222] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,973 [salt.state       :1951][INFO    ][6222] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:53:47.973606 duration_in_ms=6.459
2019-05-09 13:53:47,974 [salt.state       :1780][INFO    ][6222] Running state [prx01] at time 13:53:47.974472
2019-05-09 13:53:47,975 [salt.state       :1813][INFO    ][6222] Executing state host.present for [prx01]
2019-05-09 13:53:47,976 [salt.state       :300 ][INFO    ][6222] {'host': 'prx01'}
2019-05-09 13:53:47,977 [salt.state       :1951][INFO    ][6222] Completed state [prx01] at time 13:53:47.977370 duration_in_ms=2.899
2019-05-09 13:53:47,978 [salt.state       :1780][INFO    ][6222] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 13:53:47.978245
2019-05-09 13:53:47,978 [salt.state       :1813][INFO    ][6222] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,980 [salt.state       :300 ][INFO    ][6222] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,981 [salt.state       :1951][INFO    ][6222] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 13:53:47.981143 duration_in_ms=2.898
2019-05-09 13:53:47,982 [salt.state       :1780][INFO    ][6222] Running state [kvm01] at time 13:53:47.981958
2019-05-09 13:53:47,982 [salt.state       :1813][INFO    ][6222] Executing state host.present for [kvm01]
2019-05-09 13:53:47,984 [salt.state       :300 ][INFO    ][6222] {'host': 'kvm01'}
2019-05-09 13:53:47,984 [salt.state       :1951][INFO    ][6222] Completed state [kvm01] at time 13:53:47.984867 duration_in_ms=2.909
2019-05-09 13:53:47,985 [salt.state       :1780][INFO    ][6222] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 13:53:47.985678
2019-05-09 13:53:47,986 [salt.state       :1813][INFO    ][6222] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,988 [salt.state       :300 ][INFO    ][6222] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,988 [salt.state       :1951][INFO    ][6222] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 13:53:47.988621 duration_in_ms=2.943
2019-05-09 13:53:47,989 [salt.state       :1780][INFO    ][6222] Running state [kvm03] at time 13:53:47.989438
2019-05-09 13:53:47,990 [salt.state       :1813][INFO    ][6222] Executing state host.present for [kvm03]
2019-05-09 13:53:47,991 [salt.state       :300 ][INFO    ][6222] {'host': 'kvm03'}
2019-05-09 13:53:47,992 [salt.state       :1951][INFO    ][6222] Completed state [kvm03] at time 13:53:47.992356 duration_in_ms=2.918
2019-05-09 13:53:47,993 [salt.state       :1780][INFO    ][6222] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 13:53:47.993174
2019-05-09 13:53:47,993 [salt.state       :1813][INFO    ][6222] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:47,995 [salt.state       :300 ][INFO    ][6222] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:47,996 [salt.state       :1951][INFO    ][6222] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 13:53:47.996107 duration_in_ms=2.933
2019-05-09 13:53:47,997 [salt.state       :1780][INFO    ][6222] Running state [kvm02] at time 13:53:47.996933
2019-05-09 13:53:47,997 [salt.state       :1813][INFO    ][6222] Executing state host.present for [kvm02]
2019-05-09 13:53:47,999 [salt.state       :300 ][INFO    ][6222] {'host': 'kvm02'}
2019-05-09 13:53:47,999 [salt.state       :1951][INFO    ][6222] Completed state [kvm02] at time 13:53:47.999895 duration_in_ms=2.962
2019-05-09 13:53:48,000 [salt.state       :1780][INFO    ][6222] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 13:53:48.000718
2019-05-09 13:53:48,001 [salt.state       :1813][INFO    ][6222] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,003 [salt.state       :300 ][INFO    ][6222] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,003 [salt.state       :1951][INFO    ][6222] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 13:53:48.003706 duration_in_ms=2.987
2019-05-09 13:53:48,004 [salt.state       :1780][INFO    ][6222] Running state [dbs] at time 13:53:48.004536
2019-05-09 13:53:48,005 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs]
2019-05-09 13:53:48,007 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs'}
2019-05-09 13:53:48,007 [salt.state       :1951][INFO    ][6222] Completed state [dbs] at time 13:53:48.007526 duration_in_ms=2.99
2019-05-09 13:53:48,008 [salt.state       :1780][INFO    ][6222] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 13:53:48.008373
2019-05-09 13:53:48,008 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,010 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,011 [salt.state       :1951][INFO    ][6222] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 13:53:48.011404 duration_in_ms=3.031
2019-05-09 13:53:48,012 [salt.state       :1780][INFO    ][6222] Running state [prx] at time 13:53:48.012246
2019-05-09 13:53:48,012 [salt.state       :1813][INFO    ][6222] Executing state host.present for [prx]
2019-05-09 13:53:48,014 [salt.state       :300 ][INFO    ][6222] {'host': 'prx'}
2019-05-09 13:53:48,015 [salt.state       :1951][INFO    ][6222] Completed state [prx] at time 13:53:48.015279 duration_in_ms=3.034
2019-05-09 13:53:48,016 [salt.state       :1780][INFO    ][6222] Running state [prx.mcp-ovs-dpdk-ha.local] at time 13:53:48.016109
2019-05-09 13:53:48,016 [salt.state       :1813][INFO    ][6222] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,019 [salt.state       :300 ][INFO    ][6222] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,019 [salt.state       :1951][INFO    ][6222] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 13:53:48.019465 duration_in_ms=3.356
2019-05-09 13:53:48,020 [salt.state       :1780][INFO    ][6222] Running state [prx02] at time 13:53:48.020296
2019-05-09 13:53:48,020 [salt.state       :1813][INFO    ][6222] Executing state host.present for [prx02]
2019-05-09 13:53:48,022 [salt.state       :300 ][INFO    ][6222] {'host': 'prx02'}
2019-05-09 13:53:48,023 [salt.state       :1951][INFO    ][6222] Completed state [prx02] at time 13:53:48.023295 duration_in_ms=2.998
2019-05-09 13:53:48,024 [salt.state       :1780][INFO    ][6222] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 13:53:48.024140
2019-05-09 13:53:48,024 [salt.state       :1813][INFO    ][6222] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,026 [salt.state       :300 ][INFO    ][6222] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,027 [salt.state       :1951][INFO    ][6222] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 13:53:48.027172 duration_in_ms=3.033
2019-05-09 13:53:48,028 [salt.state       :1780][INFO    ][6222] Running state [msg02] at time 13:53:48.028018
2019-05-09 13:53:48,028 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg02]
2019-05-09 13:53:48,030 [salt.state       :300 ][INFO    ][6222] {'host': 'msg02'}
2019-05-09 13:53:48,031 [salt.state       :1951][INFO    ][6222] Completed state [msg02] at time 13:53:48.031073 duration_in_ms=3.055
2019-05-09 13:53:48,031 [salt.state       :1780][INFO    ][6222] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 13:53:48.031910
2019-05-09 13:53:48,032 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,034 [salt.state       :300 ][INFO    ][6222] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,035 [salt.state       :1951][INFO    ][6222] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 13:53:48.034996 duration_in_ms=3.087
2019-05-09 13:53:48,035 [salt.state       :1780][INFO    ][6222] Running state [msg03] at time 13:53:48.035837
2019-05-09 13:53:48,036 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg03]
2019-05-09 13:53:48,038 [salt.state       :300 ][INFO    ][6222] {'host': 'msg03'}
2019-05-09 13:53:48,038 [salt.state       :1951][INFO    ][6222] Completed state [msg03] at time 13:53:48.038910 duration_in_ms=3.073
2019-05-09 13:53:48,039 [salt.state       :1780][INFO    ][6222] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 13:53:48.039747
2019-05-09 13:53:48,040 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,042 [salt.state       :300 ][INFO    ][6222] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,042 [salt.state       :1951][INFO    ][6222] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 13:53:48.042832 duration_in_ms=3.085
2019-05-09 13:53:48,043 [salt.state       :1780][INFO    ][6222] Running state [msg01] at time 13:53:48.043679
2019-05-09 13:53:48,044 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg01]
2019-05-09 13:53:48,046 [salt.state       :300 ][INFO    ][6222] {'host': 'msg01'}
2019-05-09 13:53:48,046 [salt.state       :1951][INFO    ][6222] Completed state [msg01] at time 13:53:48.046755 duration_in_ms=3.076
2019-05-09 13:53:48,047 [salt.state       :1780][INFO    ][6222] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 13:53:48.047609
2019-05-09 13:53:48,048 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,050 [salt.state       :300 ][INFO    ][6222] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,050 [salt.state       :1951][INFO    ][6222] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 13:53:48.050709 duration_in_ms=3.1
2019-05-09 13:53:48,051 [salt.state       :1780][INFO    ][6222] Running state [msg] at time 13:53:48.051566
2019-05-09 13:53:48,052 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg]
2019-05-09 13:53:48,054 [salt.state       :300 ][INFO    ][6222] {'host': 'msg'}
2019-05-09 13:53:48,054 [salt.state       :1951][INFO    ][6222] Completed state [msg] at time 13:53:48.054714 duration_in_ms=3.148
2019-05-09 13:53:48,055 [salt.state       :1780][INFO    ][6222] Running state [msg.mcp-ovs-dpdk-ha.local] at time 13:53:48.055569
2019-05-09 13:53:48,056 [salt.state       :1813][INFO    ][6222] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,058 [salt.state       :300 ][INFO    ][6222] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,058 [salt.state       :1951][INFO    ][6222] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 13:53:48.058737 duration_in_ms=3.167
2019-05-09 13:53:48,059 [salt.state       :1780][INFO    ][6222] Running state [cfg01] at time 13:53:48.059870
2019-05-09 13:53:48,060 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cfg01]
2019-05-09 13:53:48,060 [salt.state       :300 ][INFO    ][6222] Host cfg01 (192.168.10.11) already present
2019-05-09 13:53:48,060 [salt.state       :1951][INFO    ][6222] Completed state [cfg01] at time 13:53:48.060924 duration_in_ms=1.055
2019-05-09 13:53:48,061 [salt.state       :1780][INFO    ][6222] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:53:48.061344
2019-05-09 13:53:48,061 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,062 [salt.state       :300 ][INFO    ][6222] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2019-05-09 13:53:48,062 [salt.state       :1951][INFO    ][6222] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:53:48.062369 duration_in_ms=1.026
2019-05-09 13:53:48,062 [salt.state       :1780][INFO    ][6222] Running state [cmp002] at time 13:53:48.062808
2019-05-09 13:53:48,063 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cmp002]
2019-05-09 13:53:48,064 [salt.state       :300 ][INFO    ][6222] {'host': 'cmp002'}
2019-05-09 13:53:48,064 [salt.state       :1951][INFO    ][6222] Completed state [cmp002] at time 13:53:48.064508 duration_in_ms=1.7
2019-05-09 13:53:48,065 [salt.state       :1780][INFO    ][6222] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 13:53:48.064967
2019-05-09 13:53:48,065 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,066 [salt.state       :300 ][INFO    ][6222] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,066 [salt.state       :1951][INFO    ][6222] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 13:53:48.066587 duration_in_ms=1.62
2019-05-09 13:53:48,067 [salt.state       :1780][INFO    ][6222] Running state [cmp001] at time 13:53:48.067056
2019-05-09 13:53:48,067 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cmp001]
2019-05-09 13:53:48,068 [salt.state       :300 ][INFO    ][6222] {'host': 'cmp001'}
2019-05-09 13:53:48,068 [salt.state       :1951][INFO    ][6222] Completed state [cmp001] at time 13:53:48.068634 duration_in_ms=1.578
2019-05-09 13:53:48,069 [salt.state       :1780][INFO    ][6222] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 13:53:48.069082
2019-05-09 13:53:48,069 [salt.state       :1813][INFO    ][6222] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,070 [salt.state       :300 ][INFO    ][6222] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,070 [salt.state       :1951][INFO    ][6222] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 13:53:48.070682 duration_in_ms=1.6
2019-05-09 13:53:48,071 [salt.state       :1780][INFO    ][6222] Running state [dbs01] at time 13:53:48.071135
2019-05-09 13:53:48,071 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs01]
2019-05-09 13:53:48,072 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs01'}
2019-05-09 13:53:48,072 [salt.state       :1951][INFO    ][6222] Completed state [dbs01] at time 13:53:48.072671 duration_in_ms=1.535
2019-05-09 13:53:48,073 [salt.state       :1780][INFO    ][6222] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 13:53:48.073140
2019-05-09 13:53:48,073 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,074 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,074 [salt.state       :1951][INFO    ][6222] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 13:53:48.074810 duration_in_ms=1.67
2019-05-09 13:53:48,075 [salt.state       :1780][INFO    ][6222] Running state [dbs02] at time 13:53:48.075270
2019-05-09 13:53:48,075 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs02]
2019-05-09 13:53:48,076 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs02'}
2019-05-09 13:53:48,076 [salt.state       :1951][INFO    ][6222] Completed state [dbs02] at time 13:53:48.076859 duration_in_ms=1.589
2019-05-09 13:53:48,077 [salt.state       :1780][INFO    ][6222] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 13:53:48.077311
2019-05-09 13:53:48,077 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,078 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,079 [salt.state       :1951][INFO    ][6222] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 13:53:48.079046 duration_in_ms=1.736
2019-05-09 13:53:48,079 [salt.state       :1780][INFO    ][6222] Running state [dbs03] at time 13:53:48.079481
2019-05-09 13:53:48,079 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs03]
2019-05-09 13:53:48,090 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs03'}
2019-05-09 13:53:48,090 [salt.state       :1951][INFO    ][6222] Completed state [dbs03] at time 13:53:48.090763 duration_in_ms=11.281
2019-05-09 13:53:48,091 [salt.state       :1780][INFO    ][6222] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 13:53:48.091286
2019-05-09 13:53:48,091 [salt.state       :1813][INFO    ][6222] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,092 [salt.state       :300 ][INFO    ][6222] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,093 [salt.state       :1951][INFO    ][6222] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 13:53:48.093070 duration_in_ms=1.784
2019-05-09 13:53:48,093 [salt.state       :1780][INFO    ][6222] Running state [mas01] at time 13:53:48.093544
2019-05-09 13:53:48,093 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mas01]
2019-05-09 13:53:48,095 [salt.state       :300 ][INFO    ][6222] {'host': 'mas01'}
2019-05-09 13:53:48,095 [salt.state       :1951][INFO    ][6222] Completed state [mas01] at time 13:53:48.095260 duration_in_ms=1.716
2019-05-09 13:53:48,095 [salt.state       :1780][INFO    ][6222] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 13:53:48.095725
2019-05-09 13:53:48,096 [salt.state       :1813][INFO    ][6222] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,097 [salt.state       :300 ][INFO    ][6222] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,097 [salt.state       :1951][INFO    ][6222] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 13:53:48.097394 duration_in_ms=1.669
2019-05-09 13:53:48,097 [salt.state       :1780][INFO    ][6222] Running state [ctl02] at time 13:53:48.097859
2019-05-09 13:53:48,098 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl02]
2019-05-09 13:53:48,099 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl02'}
2019-05-09 13:53:48,099 [salt.state       :1951][INFO    ][6222] Completed state [ctl02] at time 13:53:48.099587 duration_in_ms=1.727
2019-05-09 13:53:48,100 [salt.state       :1780][INFO    ][6222] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 13:53:48.100051
2019-05-09 13:53:48,100 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,101 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,101 [salt.state       :1951][INFO    ][6222] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 13:53:48.101776 duration_in_ms=1.725
2019-05-09 13:53:48,102 [salt.state       :1780][INFO    ][6222] Running state [ctl03] at time 13:53:48.102252
2019-05-09 13:53:48,102 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl03]
2019-05-09 13:53:48,103 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl03'}
2019-05-09 13:53:48,104 [salt.state       :1951][INFO    ][6222] Completed state [ctl03] at time 13:53:48.103970 duration_in_ms=1.718
2019-05-09 13:53:48,104 [salt.state       :1780][INFO    ][6222] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 13:53:48.104436
2019-05-09 13:53:48,104 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,105 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,106 [salt.state       :1951][INFO    ][6222] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 13:53:48.106125 duration_in_ms=1.689
2019-05-09 13:53:48,106 [salt.state       :1780][INFO    ][6222] Running state [ctl01] at time 13:53:48.106691
2019-05-09 13:53:48,107 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl01]
2019-05-09 13:53:48,108 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl01'}
2019-05-09 13:53:48,108 [salt.state       :1951][INFO    ][6222] Completed state [ctl01] at time 13:53:48.108571 duration_in_ms=1.88
2019-05-09 13:53:48,109 [salt.state       :1780][INFO    ][6222] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 13:53:48.109049
2019-05-09 13:53:48,109 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,110 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,110 [salt.state       :1951][INFO    ][6222] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 13:53:48.110830 duration_in_ms=1.781
2019-05-09 13:53:48,111 [salt.state       :1780][INFO    ][6222] Running state [ctl] at time 13:53:48.111302
2019-05-09 13:53:48,111 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl]
2019-05-09 13:53:48,112 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl'}
2019-05-09 13:53:48,113 [salt.state       :1951][INFO    ][6222] Completed state [ctl] at time 13:53:48.113033 duration_in_ms=1.73
2019-05-09 13:53:48,113 [salt.state       :1780][INFO    ][6222] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 13:53:48.113502
2019-05-09 13:53:48,113 [salt.state       :1813][INFO    ][6222] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2019-05-09 13:53:48,114 [salt.state       :300 ][INFO    ][6222] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2019-05-09 13:53:48,115 [salt.state       :1951][INFO    ][6222] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 13:53:48.115227 duration_in_ms=1.724
2019-05-09 13:53:48,115 [salt.state       :1780][INFO    ][6222] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:53:48.115543
2019-05-09 13:53:48,115 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2019-05-09 13:53:48,116 [salt.state       :300 ][INFO    ][6222] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2019-05-09 13:53:48,116 [salt.state       :1951][INFO    ][6222] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:53:48.116492 duration_in_ms=0.949
2019-05-09 13:53:48,117 [salt.state       :1780][INFO    ][6222] Running state [ens3] at time 13:53:48.117273
2019-05-09 13:53:48,117 [salt.state       :1813][INFO    ][6222] Executing state network.managed for [ens3]
2019-05-09 13:53:48,240 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['ifup', 'ens3'] in directory '/root'
2019-05-09 13:53:49,240 [salt.state       :300 ][INFO    ][6222] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2019-05-09 13:53:49,241 [salt.state       :1951][INFO    ][6222] Completed state [ens3] at time 13:53:49.241454 duration_in_ms=1124.181
2019-05-09 13:53:49,241 [salt.state       :1780][INFO    ][6222] Running state [ens2] at time 13:53:49.241957
2019-05-09 13:53:49,242 [salt.state       :1813][INFO    ][6222] Executing state network.managed for [ens2]
2019-05-09 13:53:49,267 [salt.state       :300 ][INFO    ][6222] {'interface': 'Added network interface.'}
2019-05-09 13:53:49,268 [salt.state       :1951][INFO    ][6222] Completed state [ens2] at time 13:53:49.267954 duration_in_ms=25.996
2019-05-09 13:53:49,268 [salt.state       :1780][INFO    ][6222] Running state [linux_system_network] at time 13:53:49.268485
2019-05-09 13:53:49,269 [salt.state       :1813][INFO    ][6222] Executing state network.system for [linux_system_network]
2019-05-09 13:53:49,270 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2019-05-09 13:53:49,291 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2019-05-09 13:53:49,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2019-05-09 13:53:49,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2019-05-09 13:53:49,992 [salt.loaded.int.module.debian_ip:1964][WARNING ][6222] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-05-09 13:53:49,993 [salt.state       :300 ][INFO    ][6222] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=ctl02\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2019-05-09 13:53:49,994 [salt.state       :1951][INFO    ][6222] Completed state [linux_system_network] at time 13:53:49.994674 duration_in_ms=726.187
2019-05-09 13:53:49,996 [salt.state       :1780][INFO    ][6222] Running state [/etc/udev/rules.d/60-net-txqueue.rules] at time 13:53:49.995932
2019-05-09 13:53:49,997 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/udev/rules.d/60-net-txqueue.rules]
2019-05-09 13:53:50,029 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'linux/files/60-net-txqueue.rules'
2019-05-09 13:53:50,051 [salt.state       :300 ][INFO    ][6222] File changed:
New file
2019-05-09 13:53:50,051 [salt.state       :1951][INFO    ][6222] Completed state [/etc/udev/rules.d/60-net-txqueue.rules] at time 13:53:50.051865 duration_in_ms=55.934
2019-05-09 13:53:50,057 [salt.state       :1780][INFO    ][6222] Running state [/bin/udevadm control --reload-rules] at time 13:53:50.057864
2019-05-09 13:53:50,058 [salt.state       :1813][INFO    ][6222] Executing state cmd.run for [/bin/udevadm control --reload-rules]
2019-05-09 13:53:50,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command '/bin/udevadm control --reload-rules' in directory '/root'
2019-05-09 13:53:50,085 [salt.state       :300 ][INFO    ][6222] {'pid': 9864, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-05-09 13:53:50,087 [salt.state       :1951][INFO    ][6222] Completed state [/bin/udevadm control --reload-rules] at time 13:53:50.087093 duration_in_ms=29.229
2019-05-09 13:53:50,094 [salt.state       :1780][INFO    ][6222] Running state [/bin/udevadm trigger --attr-match=subsystem=net] at time 13:53:50.094294
2019-05-09 13:53:50,095 [salt.state       :1813][INFO    ][6222] Executing state cmd.run for [/bin/udevadm trigger --attr-match=subsystem=net]
2019-05-09 13:53:50,098 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command '/bin/udevadm trigger --attr-match=subsystem=net' in directory '/root'
2019-05-09 13:53:50,195 [salt.state       :300 ][INFO    ][6222] {'pid': 9866, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-05-09 13:53:50,197 [salt.state       :1951][INFO    ][6222] Completed state [/bin/udevadm trigger --attr-match=subsystem=net] at time 13:53:50.197594 duration_in_ms=103.299
2019-05-09 13:53:50,199 [salt.state       :1780][INFO    ][6222] Running state [/etc/profile.d/proxy.sh] at time 13:53:50.199609
2019-05-09 13:53:50,200 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/profile.d/proxy.sh]
2019-05-09 13:53:50,202 [salt.state       :300 ][INFO    ][6222] File /etc/profile.d/proxy.sh is not present
2019-05-09 13:53:50,203 [salt.state       :1951][INFO    ][6222] Completed state [/etc/profile.d/proxy.sh] at time 13:53:50.203780 duration_in_ms=4.172
2019-05-09 13:53:50,204 [salt.state       :1780][INFO    ][6222] Running state [/etc/apt/apt.conf.d/95proxies] at time 13:53:50.204888
2019-05-09 13:53:50,206 [salt.state       :1813][INFO    ][6222] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2019-05-09 13:53:50,207 [salt.state       :300 ][INFO    ][6222] File /etc/apt/apt.conf.d/95proxies is not present
2019-05-09 13:53:50,208 [salt.state       :1951][INFO    ][6222] Completed state [/etc/apt/apt.conf.d/95proxies] at time 13:53:50.208220 duration_in_ms=3.332
2019-05-09 13:53:50,211 [salt.state       :1780][INFO    ][6222] Running state [/dev/shm] at time 13:53:50.211857
2019-05-09 13:53:50,213 [salt.state       :1813][INFO    ][6222] Executing state mount.mounted for [/dev/shm]
2019-05-09 13:53:50,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'mount -l' in directory '/root'
2019-05-09 13:53:50,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'blkid' in directory '/root'
2019-05-09 13:53:50,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'mount -l' in directory '/root'
2019-05-09 13:53:50,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-05-09 13:53:50,330 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'mount -l' in directory '/root'
2019-05-09 13:53:50,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-05-09 13:53:50,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'mount -l' in directory '/root'
2019-05-09 13:53:50,367 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'umount /dev/shm' in directory '/root'
2019-05-09 13:53:50,389 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][6222] Command '['umount', '/dev/shm']' failed with return code: 32
2019-05-09 13:53:50,390 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][6222] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-05-09 13:53:50,391 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][6222] retcode: 32
2019-05-09 13:53:50,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'mount -l' in directory '/root'
2019-05-09 13:53:50,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command 'blkid' in directory '/root'
2019-05-09 13:53:50,442 [salt.state       :300 ][INFO    ][6222] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2019-05-09 13:53:50,443 [salt.state       :1951][INFO    ][6222] Completed state [/dev/shm] at time 13:53:50.443811 duration_in_ms=231.954
2019-05-09 13:53:50,449 [salt.state       :1780][INFO    ][6222] Running state [ntp] at time 13:53:50.448925
2019-05-09 13:53:50,449 [salt.state       :1813][INFO    ][6222] Executing state pkg.installed for [ntp]
2019-05-09 13:53:50,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 13:53:50,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2019-05-09 13:53:56,646 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:53:56,680 [salt.state       :300 ][INFO    ][6222] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2019-05-09 13:53:56,705 [salt.state       :915 ][INFO    ][6222] Loading fresh modules for state activity
2019-05-09 13:53:56,738 [salt.state       :1951][INFO    ][6222] Completed state [ntp] at time 13:53:56.738760 duration_in_ms=6289.836
2019-05-09 13:53:56,744 [salt.state       :1780][INFO    ][6222] Running state [/etc/ntp.conf] at time 13:53:56.744080
2019-05-09 13:53:56,744 [salt.state       :1813][INFO    ][6222] Executing state file.managed for [/etc/ntp.conf]
2019-05-09 13:53:56,841 [salt.fileclient  :1219][INFO    ][6222] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2019-05-09 13:53:56,906 [salt.state       :300 ][INFO    ][6222] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+logfile /var/log/ntp.log
+server 1.se.pool.ntp.org iburst
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2019-05-09 13:53:56,907 [salt.state       :1951][INFO    ][6222] Completed state [/etc/ntp.conf] at time 13:53:56.906990 duration_in_ms=162.91
2019-05-09 13:53:57,400 [salt.state       :1780][INFO    ][6222] Running state [ntp] at time 13:53:57.400630
2019-05-09 13:53:57,401 [salt.state       :1813][INFO    ][6222] Executing state service.running for [ntp]
2019-05-09 13:53:57,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2019-05-09 13:53:57,427 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-05-09 13:53:57,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2019-05-09 13:53:57,477 [salt.state       :300 ][INFO    ][6222] The service ntp is already running
2019-05-09 13:53:57,478 [salt.state       :1951][INFO    ][6222] Completed state [ntp] at time 13:53:57.478116 duration_in_ms=77.486
2019-05-09 13:53:57,478 [salt.state       :1780][INFO    ][6222] Running state [ntp] at time 13:53:57.478395
2019-05-09 13:53:57,478 [salt.state       :1813][INFO    ][6222] Executing state service.mod_watch for [ntp]
2019-05-09 13:53:57,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-05-09 13:53:57,497 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6222] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2019-05-09 13:53:57,639 [salt.state       :300 ][INFO    ][6222] {'ntp': True}
2019-05-09 13:53:57,640 [salt.state       :1951][INFO    ][6222] Completed state [ntp] at time 13:53:57.640510 duration_in_ms=162.113
2019-05-09 13:53:57,665 [salt.minion      :1711][INFO    ][6222] Returning information for job: 20190509135259465015
2019-05-09 13:54:55,820 [salt.minion      :1308][INFO    ][6133] User sudo_ubuntu Executing command state.apply with jid 20190509135455810861
2019-05-09 13:54:55,845 [salt.minion      :1432][INFO    ][10843] Starting a new job with PID 10843
2019-05-09 13:55:03,638 [salt.state       :915 ][INFO    ][10843] Loading fresh modules for state activity
2019-05-09 13:55:07,573 [salt.state       :1780][INFO    ][10843] Running state [/etc/environment] at time 13:55:07.573253
2019-05-09 13:55:07,574 [salt.state       :1813][INFO    ][10843] Executing state file.blockreplace for [/etc/environment]
2019-05-09 13:55:07,580 [salt.state       :300 ][INFO    ][10843] No changes needed to be made
2019-05-09 13:55:07,580 [salt.state       :1951][INFO    ][10843] Completed state [/etc/environment] at time 13:55:07.580679 duration_in_ms=7.426
2019-05-09 13:55:07,581 [salt.state       :1780][INFO    ][10843] Running state [/etc/profile.d] at time 13:55:07.581185
2019-05-09 13:55:07,581 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/profile.d]
2019-05-09 13:55:07,583 [salt.state       :300 ][INFO    ][10843] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2019-05-09 13:55:07,584 [salt.state       :1951][INFO    ][10843] Completed state [/etc/profile.d] at time 13:55:07.584255 duration_in_ms=3.069
2019-05-09 13:55:07,584 [salt.state       :1780][INFO    ][10843] Running state [/etc/bash.bashrc] at time 13:55:07.584741
2019-05-09 13:55:07,585 [salt.state       :1813][INFO    ][10843] Executing state file.blockreplace for [/etc/bash.bashrc]
2019-05-09 13:55:08,516 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['git', '--version'] in directory '/root'
2019-05-09 13:55:08,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2019-05-09 13:55:08,735 [salt.state       :300 ][INFO    ][10843] No changes needed to be made
2019-05-09 13:55:08,735 [salt.state       :1951][INFO    ][10843] Completed state [/etc/bash.bashrc] at time 13:55:08.735570 duration_in_ms=1150.827
2019-05-09 13:55:08,736 [salt.state       :1780][INFO    ][10843] Running state [/etc/profile] at time 13:55:08.736046
2019-05-09 13:55:08,736 [salt.state       :1813][INFO    ][10843] Executing state file.blockreplace for [/etc/profile]
2019-05-09 13:55:08,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'test -f /etc/profile' in directory '/root'
2019-05-09 13:55:08,753 [salt.state       :300 ][INFO    ][10843] No changes needed to be made
2019-05-09 13:55:08,753 [salt.state       :1951][INFO    ][10843] Completed state [/etc/profile] at time 13:55:08.753773 duration_in_ms=17.727
2019-05-09 13:55:08,754 [salt.state       :1780][INFO    ][10843] Running state [/etc/login.defs] at time 13:55:08.754253
2019-05-09 13:55:08,754 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/login.defs]
2019-05-09 13:55:08,869 [salt.state       :300 ][INFO    ][10843] File /etc/login.defs is in the correct state
2019-05-09 13:55:08,869 [salt.state       :1951][INFO    ][10843] Completed state [/etc/login.defs] at time 13:55:08.869944 duration_in_ms=115.691
2019-05-09 13:55:08,877 [salt.state       :1780][INFO    ][10843] Running state [at] at time 13:55:08.877516
2019-05-09 13:55:08,877 [salt.state       :1813][INFO    ][10843] Executing state pkg.installed for [at]
2019-05-09 13:55:08,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:55:09,356 [salt.state       :300 ][INFO    ][10843] All specified packages are already installed
2019-05-09 13:55:09,357 [salt.state       :1951][INFO    ][10843] Completed state [at] at time 13:55:09.357461 duration_in_ms=479.944
2019-05-09 13:55:09,362 [salt.state       :1780][INFO    ][10843] Running state [atd] at time 13:55:09.362316
2019-05-09 13:55:09,363 [salt.state       :1813][INFO    ][10843] Executing state service.running for [atd]
2019-05-09 13:55:09,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2019-05-09 13:55:09,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2019-05-09 13:55:09,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2019-05-09 13:55:09,458 [salt.state       :300 ][INFO    ][10843] The service atd is already running
2019-05-09 13:55:09,459 [salt.state       :1951][INFO    ][10843] Completed state [atd] at time 13:55:09.459673 duration_in_ms=97.356
2019-05-09 13:55:09,465 [salt.state       :1780][INFO    ][10843] Running state [cron] at time 13:55:09.465117
2019-05-09 13:55:09,466 [salt.state       :1813][INFO    ][10843] Executing state pkg.installed for [cron]
2019-05-09 13:55:09,484 [salt.state       :300 ][INFO    ][10843] All specified packages are already installed
2019-05-09 13:55:09,484 [salt.state       :1951][INFO    ][10843] Completed state [cron] at time 13:55:09.484736 duration_in_ms=19.618
2019-05-09 13:55:09,487 [salt.state       :1780][INFO    ][10843] Running state [/etc/at.allow] at time 13:55:09.487076
2019-05-09 13:55:09,487 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/at.allow]
2019-05-09 13:55:09,523 [salt.state       :300 ][INFO    ][10843] File /etc/at.allow is in the correct state
2019-05-09 13:55:09,524 [salt.state       :1951][INFO    ][10843] Completed state [/etc/at.allow] at time 13:55:09.524332 duration_in_ms=37.255
2019-05-09 13:55:09,525 [salt.state       :1780][INFO    ][10843] Running state [/etc/at.deny] at time 13:55:09.525119
2019-05-09 13:55:09,525 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/at.deny]
2019-05-09 13:55:09,526 [salt.state       :300 ][INFO    ][10843] File /etc/at.deny is not present
2019-05-09 13:55:09,527 [salt.state       :1951][INFO    ][10843] Completed state [/etc/at.deny] at time 13:55:09.527639 duration_in_ms=2.52
2019-05-09 13:55:09,530 [salt.state       :1780][INFO    ][10843] Running state [cron] at time 13:55:09.530783
2019-05-09 13:55:09,531 [salt.state       :1813][INFO    ][10843] Executing state service.running for [cron]
2019-05-09 13:55:09,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2019-05-09 13:55:09,559 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2019-05-09 13:55:09,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2019-05-09 13:55:09,623 [salt.state       :300 ][INFO    ][10843] The service cron is already running
2019-05-09 13:55:09,625 [salt.state       :1951][INFO    ][10843] Completed state [cron] at time 13:55:09.625047 duration_in_ms=94.264
2019-05-09 13:55:09,629 [salt.state       :1780][INFO    ][10843] Running state [/etc/cron.allow] at time 13:55:09.629460
2019-05-09 13:55:09,630 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/cron.allow]
2019-05-09 13:55:09,673 [salt.state       :300 ][INFO    ][10843] File /etc/cron.allow is in the correct state
2019-05-09 13:55:09,674 [salt.state       :1951][INFO    ][10843] Completed state [/etc/cron.allow] at time 13:55:09.674571 duration_in_ms=45.11
2019-05-09 13:55:09,675 [salt.state       :1780][INFO    ][10843] Running state [/etc/cron.deny] at time 13:55:09.675620
2019-05-09 13:55:09,676 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/cron.deny]
2019-05-09 13:55:09,677 [salt.state       :300 ][INFO    ][10843] File /etc/cron.deny is not present
2019-05-09 13:55:09,678 [salt.state       :1951][INFO    ][10843] Completed state [/etc/cron.deny] at time 13:55:09.678455 duration_in_ms=2.835
2019-05-09 13:55:09,681 [salt.state       :1780][INFO    ][10843] Running state [/etc/crontab] at time 13:55:09.681598
2019-05-09 13:55:09,682 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/crontab]
2019-05-09 13:55:09,684 [salt.state       :300 ][INFO    ][10843] File /etc/crontab exists with proper permissions. No changes made.
2019-05-09 13:55:09,685 [salt.state       :1951][INFO    ][10843] Completed state [/etc/crontab] at time 13:55:09.685513 duration_in_ms=3.915
2019-05-09 13:55:09,690 [salt.state       :1780][INFO    ][10843] Running state [/etc/cron.d] at time 13:55:09.690438
2019-05-09 13:55:09,691 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/cron.d]
2019-05-09 13:55:09,694 [salt.state       :300 ][INFO    ][10843] Directory /etc/cron.d is in the correct state
Directory /etc/cron.d updated
2019-05-09 13:55:09,694 [salt.state       :1951][INFO    ][10843] Completed state [/etc/cron.d] at time 13:55:09.694768 duration_in_ms=4.331
2019-05-09 13:55:09,699 [salt.state       :1780][INFO    ][10843] Running state [/etc/cron.daily] at time 13:55:09.699121
2019-05-09 13:55:09,699 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/cron.daily]
2019-05-09 13:55:09,703 [salt.state       :300 ][INFO    ][10843] Directory /etc/cron.daily is in the correct state
Directory /etc/cron.daily updated
2019-05-09 13:55:09,703 [salt.state       :1951][INFO    ][10843] Completed state [/etc/cron.daily] at time 13:55:09.703737 duration_in_ms=4.617
2019-05-09 13:55:09,708 [salt.state       :1780][INFO    ][10843] Running state [/etc/cron.hourly] at time 13:55:09.707906
2019-05-09 13:55:09,708 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/cron.hourly]
2019-05-09 13:55:09,711 [salt.state       :300 ][INFO    ][10843] Directory /etc/cron.hourly is in the correct state
Directory /etc/cron.hourly updated
2019-05-09 13:55:09,712 [salt.state       :1951][INFO    ][10843] Completed state [/etc/cron.hourly] at time 13:55:09.712056 duration_in_ms=4.15
2019-05-09 13:55:09,716 [salt.state       :1780][INFO    ][10843] Running state [/etc/cron.monthly] at time 13:55:09.716340
2019-05-09 13:55:09,717 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/cron.monthly]
2019-05-09 13:55:09,719 [salt.state       :300 ][INFO    ][10843] Directory /etc/cron.monthly is in the correct state
Directory /etc/cron.monthly updated
2019-05-09 13:55:09,719 [salt.state       :1951][INFO    ][10843] Completed state [/etc/cron.monthly] at time 13:55:09.719462 duration_in_ms=3.123
2019-05-09 13:55:09,721 [salt.state       :1780][INFO    ][10843] Running state [/etc/cron.weekly] at time 13:55:09.721810
2019-05-09 13:55:09,722 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/cron.weekly]
2019-05-09 13:55:09,724 [salt.state       :300 ][INFO    ][10843] Directory /etc/cron.weekly is in the correct state
Directory /etc/cron.weekly updated
2019-05-09 13:55:09,724 [salt.state       :1951][INFO    ][10843] Completed state [/etc/cron.weekly] at time 13:55:09.724609 duration_in_ms=2.798
2019-05-09 13:55:09,735 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 13:55:09.735297
2019-05-09 13:55:09,735 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2019-05-09 13:55:09,778 [salt.state       :300 ][INFO    ][10843] File /etc/apt/apt.conf.d/99prefer_ipv4-salt is in the correct state
2019-05-09 13:55:09,779 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 13:55:09.779315 duration_in_ms=44.017
2019-05-09 13:55:09,779 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 13:55:09.779828
2019-05-09 13:55:09,780 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2019-05-09 13:55:09,817 [salt.state       :300 ][INFO    ][10843] File /etc/apt/apt.conf.d/99allow_downgrades-salt is in the correct state
2019-05-09 13:55:09,818 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 13:55:09.817959 duration_in_ms=38.131
2019-05-09 13:55:09,822 [salt.state       :1780][INFO    ][10843] Running state [linux_repo_prereq_pkgs] at time 13:55:09.822131
2019-05-09 13:55:09,822 [salt.state       :1813][INFO    ][10843] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2019-05-09 13:55:09,844 [salt.state       :300 ][INFO    ][10843] All specified packages are already installed
2019-05-09 13:55:09,845 [salt.state       :1951][INFO    ][10843] Completed state [linux_repo_prereq_pkgs] at time 13:55:09.844993 duration_in_ms=22.861
2019-05-09 13:55:09,845 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 13:55:09.845516
2019-05-09 13:55:09,846 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2019-05-09 13:55:09,846 [salt.state       :300 ][INFO    ][10843] File /etc/apt/apt.conf.d/99proxies-salt is not present
2019-05-09 13:55:09,847 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 13:55:09.847012 duration_in_ms=1.495
2019-05-09 13:55:09,847 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 13:55:09.847442
2019-05-09 13:55:09,847 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2019-05-09 13:55:09,848 [salt.state       :300 ][INFO    ][10843] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2019-05-09 13:55:09,848 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 13:55:09.848817 duration_in_ms=1.376
2019-05-09 13:55:09,849 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 13:55:09.849286
2019-05-09 13:55:09,849 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/apt/preferences.d/mirantis_openstack]
2019-05-09 13:55:09,850 [salt.state       :300 ][INFO    ][10843] File /etc/apt/preferences.d/mirantis_openstack is not present
2019-05-09 13:55:09,850 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 13:55:09.850724 duration_in_ms=1.44
2019-05-09 13:55:09,851 [salt.state       :1780][INFO    ][10843] Running state [echo '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' | base64 -d | apt-key add -] at time 13:55:09.851210
2019-05-09 13:55:09,851 [salt.state       :1813][INFO    ][10843] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-05-09 13:55:09,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-05-09 13:55:10,041 [salt.state       :300 ][INFO    ][10843] {'pid': 10948, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-05-09 13:55:10,042 [salt.state       :1951][INFO    ][10843] Completed state [echo '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' | base64 -d | apt-key add -] at time 13:55:10.042597 duration_in_ms=191.387
2019-05-09 13:55:10,049 [salt.state       :1780][INFO    ][10843] Running state [deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main] at time 13:55:10.049304
2019-05-09 13:55:10,049 [salt.state       :1813][INFO    ][10843] Executing state pkgrepo.managed for [deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main]
2019-05-09 13:55:10,222 [salt.state       :300 ][INFO    ][10843] Configured package repo 'deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main'
2019-05-09 13:55:10,222 [salt.state       :1951][INFO    ][10843] Completed state [deb https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main] at time 13:55:10.222539 duration_in_ms=173.234
2019-05-09 13:55:10,222 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports] at time 13:55:10.222809
2019-05-09 13:55:10,223 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports]
2019-05-09 13:55:10,223 [salt.state       :300 ][INFO    ][10843] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports is not present
2019-05-09 13:55:10,223 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack_backports] at time 13:55:10.223674 duration_in_ms=0.865
2019-05-09 13:55:10,223 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/preferences.d/mirantis_openstack_backports] at time 13:55:10.223901
2019-05-09 13:55:10,224 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/apt/preferences.d/mirantis_openstack_backports]
2019-05-09 13:55:10,224 [salt.state       :300 ][INFO    ][10843] File /etc/apt/preferences.d/mirantis_openstack_backports is not present
2019-05-09 13:55:10,224 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/preferences.d/mirantis_openstack_backports] at time 13:55:10.224574 duration_in_ms=0.673
2019-05-09 13:55:10,224 [salt.state       :1780][INFO    ][10843] Running state [echo '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' | base64 -d | apt-key add -] at time 13:55:10.224812
2019-05-09 13:55:10,225 [salt.state       :1813][INFO    ][10843] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-05-09 13:55:10,225 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-05-09 13:55:10,424 [salt.state       :300 ][INFO    ][10843] {'pid': 11062, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-05-09 13:55:10,425 [salt.state       :1951][INFO    ][10843] Completed state [echo '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' | base64 -d | apt-key add -] at time 13:55:10.424925 duration_in_ms=200.111
2019-05-09 13:55:10,435 [salt.state       :1780][INFO    ][10843] Running state [deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main] at time 13:55:10.435050
2019-05-09 13:55:10,435 [salt.state       :1813][INFO    ][10843] Executing state pkgrepo.managed for [deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main]
2019-05-09 13:55:10,622 [salt.state       :300 ][INFO    ][10843] Configured package repo 'deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main'
2019-05-09 13:55:10,622 [salt.state       :1951][INFO    ][10843] Completed state [deb https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial main] at time 13:55:10.622543 duration_in_ms=187.494
2019-05-09 13:55:10,622 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs] at time 13:55:10.622789
2019-05-09 13:55:10,623 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs]
2019-05-09 13:55:10,623 [salt.state       :300 ][INFO    ][10843] File /etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs is not present
2019-05-09 13:55:10,623 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mcp_glusterfs] at time 13:55:10.623638 duration_in_ms=0.849
2019-05-09 13:55:10,623 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/preferences.d/mcp_glusterfs] at time 13:55:10.623859
2019-05-09 13:55:10,624 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/apt/preferences.d/mcp_glusterfs]
2019-05-09 13:55:10,762 [salt.state       :300 ][INFO    ][10843] File /etc/apt/preferences.d/mcp_glusterfs is in the correct state
2019-05-09 13:55:10,763 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/preferences.d/mcp_glusterfs] at time 13:55:10.763307 duration_in_ms=139.447
2019-05-09 13:55:10,763 [salt.state       :1780][INFO    ][10843] Running state [echo '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' | base64 -d | apt-key add -] at time 13:55:10.763728
2019-05-09 13:55:10,764 [salt.state       :1813][INFO    ][10843] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-05-09 13:55:10,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-05-09 13:55:10,887 [salt.minion      :1308][INFO    ][6133] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509135510875865
2019-05-09 13:55:10,902 [salt.minion      :1432][INFO    ][11248] Starting a new job with PID 11248
2019-05-09 13:55:10,933 [salt.minion      :1711][INFO    ][11248] Returning information for job: 20190509135510875865
2019-05-09 13:55:10,944 [salt.state       :300 ][INFO    ][10843] {'pid': 11178, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-05-09 13:55:10,945 [salt.state       :1951][INFO    ][10843] Completed state [echo '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' | base64 -d | apt-key add -] at time 13:55:10.945499 duration_in_ms=181.77
2019-05-09 13:55:10,965 [salt.state       :1780][INFO    ][10843] Running state [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main] at time 13:55:10.964971
2019-05-09 13:55:10,965 [salt.state       :1813][INFO    ][10843] Executing state pkgrepo.managed for [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main]
2019-05-09 13:55:11,062 [salt.state       :300 ][INFO    ][10843] Package repo 'deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main' already configured
2019-05-09 13:55:11,063 [salt.state       :1951][INFO    ][10843] Completed state [deb http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial main] at time 13:55:11.063452 duration_in_ms=98.481
2019-05-09 13:55:11,064 [salt.state       :1780][INFO    ][10843] Running state [pkg.refresh_db] at time 13:55:11.063985
2019-05-09 13:55:11,064 [salt.state       :1813][INFO    ][10843] Executing state module.run for [pkg.refresh_db]
2019-05-09 13:55:11,065 [salt.utils.decorators:613 ][WARNING ][10843] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-05-09 13:55:11,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 13:55:14,412 [salt.state       :300 ][INFO    ][10843] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'https://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial InRelease': None, 'https://mirror.mirantis.com/nightly//openstack-queens/xenial xenial InRelease': None, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://ppa.launchpad.net/gluster/glusterfs-3.13/ubuntu xenial InRelease': None}}
2019-05-09 13:55:14,413 [salt.state       :1951][INFO    ][10843] Completed state [pkg.refresh_db] at time 13:55:14.413167 duration_in_ms=3349.182
2019-05-09 13:55:14,413 [salt.state       :1780][INFO    ][10843] Running state [linux_extra_packages_removed] at time 13:55:14.413587
2019-05-09 13:55:14,414 [salt.state       :1813][INFO    ][10843] Executing state pkg.removed for [linux_extra_packages_removed]
2019-05-09 13:55:14,431 [salt.state       :300 ][INFO    ][10843] All specified packages are already absent
2019-05-09 13:55:14,431 [salt.state       :1951][INFO    ][10843] Completed state [linux_extra_packages_removed] at time 13:55:14.431595 duration_in_ms=18.008
2019-05-09 13:55:14,431 [salt.state       :1780][INFO    ][10843] Running state [linux_extra_packages_latest] at time 13:55:14.431806
2019-05-09 13:55:14,432 [salt.state       :1813][INFO    ][10843] Executing state pkg.latest for [linux_extra_packages_latest]
2019-05-09 13:55:14,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2019-05-09 13:55:14,484 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['apt-cache', '-q', 'policy', 'smartmontools'] in directory '/root'
2019-05-09 13:55:14,524 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['apt-cache', '-q', 'policy', 'rsync'] in directory '/root'
2019-05-09 13:55:14,565 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['apt-cache', '-q', 'policy', 'python-cryptography'] in directory '/root'
2019-05-09 13:55:14,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['apt-cache', '-q', 'policy', 'python-pymysql'] in directory '/root'
2019-05-09 13:55:14,647 [salt.state       :300 ][INFO    ][10843] All packages are up-to-date (python-cryptography, python-pymysql, python-tornado, rsync, smartmontools).
2019-05-09 13:55:14,648 [salt.state       :1951][INFO    ][10843] Completed state [linux_extra_packages_latest] at time 13:55:14.648112 duration_in_ms=216.304
2019-05-09 13:55:14,648 [salt.state       :1780][INFO    ][10843] Running state [UTC] at time 13:55:14.648446
2019-05-09 13:55:14,648 [salt.state       :1813][INFO    ][10843] Executing state timezone.system for [UTC]
2019-05-09 13:55:14,649 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['timedatectl'] in directory '/root'
2019-05-09 13:55:14,674 [salt.state       :300 ][INFO    ][10843] Timezone UTC already set, UTC already set to UTC
2019-05-09 13:55:14,675 [salt.state       :1951][INFO    ][10843] Completed state [UTC] at time 13:55:14.675155 duration_in_ms=26.708
2019-05-09 13:55:14,675 [salt.state       :1780][INFO    ][10843] Running state [/etc/default/grub.d] at time 13:55:14.675523
2019-05-09 13:55:14,675 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/default/grub.d]
2019-05-09 13:55:14,676 [salt.state       :300 ][INFO    ][10843] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2019-05-09 13:55:14,677 [salt.state       :1951][INFO    ][10843] Completed state [/etc/default/grub.d] at time 13:55:14.677123 duration_in_ms=1.6
2019-05-09 13:55:14,677 [salt.state       :1780][INFO    ][10843] Running state [update-grub] at time 13:55:14.677352
2019-05-09 13:55:14,677 [salt.state       :1813][INFO    ][10843] Executing state cmd.wait for [update-grub]
2019-05-09 13:55:14,677 [salt.state       :300 ][INFO    ][10843] No changes made for update-grub
2019-05-09 13:55:14,678 [salt.state       :1951][INFO    ][10843] Completed state [update-grub] at time 13:55:14.678054 duration_in_ms=0.702
2019-05-09 13:55:14,680 [salt.state       :1780][INFO    ][10843] Running state [/boot/grub/grub.cfg] at time 13:55:14.680418
2019-05-09 13:55:14,680 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/boot/grub/grub.cfg]
2019-05-09 13:55:14,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2019-05-09 13:55:14,695 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:14,696 [salt.state       :300 ][INFO    ][10843] File /boot/grub/grub.cfg exists with proper permissions. No changes made.
2019-05-09 13:55:14,696 [salt.state       :1951][INFO    ][10843] Completed state [/boot/grub/grub.cfg] at time 13:55:14.696417 duration_in_ms=15.999
2019-05-09 13:55:14,696 [salt.state       :1780][INFO    ][10843] Running state [nf_conntrack] at time 13:55:14.696739
2019-05-09 13:55:14,697 [salt.state       :1813][INFO    ][10843] Executing state kmod.present for [nf_conntrack]
2019-05-09 13:55:14,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'lsmod' in directory '/root'
2019-05-09 13:55:14,707 [salt.state       :300 ][INFO    ][10843] Kernel module nf_conntrack is already present
2019-05-09 13:55:14,707 [salt.state       :1951][INFO    ][10843] Completed state [nf_conntrack] at time 13:55:14.707832 duration_in_ms=11.093
2019-05-09 13:55:14,708 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d] at time 13:55:14.708150
2019-05-09 13:55:14,708 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/modprobe.d]
2019-05-09 13:55:14,709 [salt.state       :300 ][INFO    ][10843] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2019-05-09 13:55:14,709 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d] at time 13:55:14.709624 duration_in_ms=1.475
2019-05-09 13:55:14,711 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/hfsplus.conf] at time 13:55:14.711938
2019-05-09 13:55:14,712 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2019-05-09 13:55:14,847 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/hfsplus.conf is in the correct state
2019-05-09 13:55:14,848 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/hfsplus.conf] at time 13:55:14.848060 duration_in_ms=136.122
2019-05-09 13:55:14,849 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/rds.conf] at time 13:55:14.849461
2019-05-09 13:55:14,849 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2019-05-09 13:55:15,045 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/rds.conf is in the correct state
2019-05-09 13:55:15,045 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/rds.conf] at time 13:55:15.045519 duration_in_ms=196.058
2019-05-09 13:55:15,047 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/cramfs.conf] at time 13:55:15.047107
2019-05-09 13:55:15,047 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2019-05-09 13:55:15,174 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/cramfs.conf is in the correct state
2019-05-09 13:55:15,174 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/cramfs.conf] at time 13:55:15.174659 duration_in_ms=127.552
2019-05-09 13:55:15,176 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/freevxfs.conf] at time 13:55:15.176046
2019-05-09 13:55:15,176 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2019-05-09 13:55:15,301 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/freevxfs.conf is in the correct state
2019-05-09 13:55:15,301 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/freevxfs.conf] at time 13:55:15.301906 duration_in_ms=125.859
2019-05-09 13:55:15,303 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/hfs.conf] at time 13:55:15.303355
2019-05-09 13:55:15,303 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2019-05-09 13:55:15,430 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/hfs.conf is in the correct state
2019-05-09 13:55:15,431 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/hfs.conf] at time 13:55:15.431090 duration_in_ms=127.735
2019-05-09 13:55:15,432 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/squashfs.conf] at time 13:55:15.432419
2019-05-09 13:55:15,432 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2019-05-09 13:55:15,553 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/squashfs.conf is in the correct state
2019-05-09 13:55:15,553 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/squashfs.conf] at time 13:55:15.553758 duration_in_ms=121.339
2019-05-09 13:55:15,555 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/udf.conf] at time 13:55:15.555230
2019-05-09 13:55:15,555 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2019-05-09 13:55:15,682 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/udf.conf is in the correct state
2019-05-09 13:55:15,682 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/udf.conf] at time 13:55:15.682948 duration_in_ms=127.718
2019-05-09 13:55:15,684 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/vfat.conf] at time 13:55:15.684433
2019-05-09 13:55:15,684 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2019-05-09 13:55:15,811 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/vfat.conf is in the correct state
2019-05-09 13:55:15,812 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/vfat.conf] at time 13:55:15.812078 duration_in_ms=127.644
2019-05-09 13:55:15,813 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/sctp.conf] at time 13:55:15.813546
2019-05-09 13:55:15,813 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2019-05-09 13:55:15,937 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/sctp.conf is in the correct state
2019-05-09 13:55:15,937 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/sctp.conf] at time 13:55:15.937214 duration_in_ms=123.667
2019-05-09 13:55:15,938 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/jffs2.conf] at time 13:55:15.938670
2019-05-09 13:55:15,938 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2019-05-09 13:55:16,066 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/jffs2.conf is in the correct state
2019-05-09 13:55:16,066 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/jffs2.conf] at time 13:55:16.066951 duration_in_ms=128.281
2019-05-09 13:55:16,068 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/tipc.conf] at time 13:55:16.068435
2019-05-09 13:55:16,068 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2019-05-09 13:55:16,194 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/tipc.conf is in the correct state
2019-05-09 13:55:16,195 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/tipc.conf] at time 13:55:16.195010 duration_in_ms=126.574
2019-05-09 13:55:16,196 [salt.state       :1780][INFO    ][10843] Running state [/etc/modprobe.d/dccp.conf] at time 13:55:16.196535
2019-05-09 13:55:16,196 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2019-05-09 13:55:16,318 [salt.state       :300 ][INFO    ][10843] File /etc/modprobe.d/dccp.conf is in the correct state
2019-05-09 13:55:16,318 [salt.state       :1951][INFO    ][10843] Completed state [/etc/modprobe.d/dccp.conf] at time 13:55:16.318890 duration_in_ms=122.355
2019-05-09 13:55:16,319 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_congestion_control] at time 13:55:16.319150
2019-05-09 13:55:16,319 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2019-05-09 13:55:16,320 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_congestion_control' in directory '/root'
2019-05-09 13:55:16,330 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_congestion_control = yeah is already set
2019-05-09 13:55:16,330 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_congestion_control] at time 13:55:16.330601 duration_in_ms=11.451
2019-05-09 13:55:16,331 [salt.state       :1780][INFO    ][10843] Running state [net.core.netdev_budget] at time 13:55:16.330997
2019-05-09 13:55:16,331 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.core.netdev_budget]
2019-05-09 13:55:16,332 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.core.netdev_budget' in directory '/root'
2019-05-09 13:55:16,340 [salt.state       :300 ][INFO    ][10843] Sysctl value net.core.netdev_budget = 600 is already set
2019-05-09 13:55:16,341 [salt.state       :1951][INFO    ][10843] Completed state [net.core.netdev_budget] at time 13:55:16.340975 duration_in_ms=9.978
2019-05-09 13:55:16,341 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_slow_start_after_idle] at time 13:55:16.341327
2019-05-09 13:55:16,341 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2019-05-09 13:55:16,342 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_slow_start_after_idle' in directory '/root'
2019-05-09 13:55:16,350 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_slow_start_after_idle = 0 is already set
2019-05-09 13:55:16,351 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 13:55:16.351295 duration_in_ms=9.968
2019-05-09 13:55:16,351 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 13:55:16.351650
2019-05-09 13:55:16,351 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2019-05-09 13:55:16,352 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.icmp_echo_ignore_broadcasts' in directory '/root'
2019-05-09 13:55:16,361 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.icmp_echo_ignore_broadcasts = 1 is already set
2019-05-09 13:55:16,361 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 13:55:16.361402 duration_in_ms=9.753
2019-05-09 13:55:16,361 [salt.state       :1780][INFO    ][10843] Running state [net.nf_conntrack_max] at time 13:55:16.361761
2019-05-09 13:55:16,362 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.nf_conntrack_max]
2019-05-09 13:55:16,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.nf_conntrack_max' in directory '/root'
2019-05-09 13:55:16,371 [salt.state       :300 ][INFO    ][10843] Sysctl value net.nf_conntrack_max = 1048576 is already set
2019-05-09 13:55:16,371 [salt.state       :1951][INFO    ][10843] Completed state [net.nf_conntrack_max] at time 13:55:16.371828 duration_in_ms=10.067
2019-05-09 13:55:16,372 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 13:55:16.372178
2019-05-09 13:55:16,372 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2019-05-09 13:55:16,373 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.icmp_ignore_bogus_error_responses' in directory '/root'
2019-05-09 13:55:16,381 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.icmp_ignore_bogus_error_responses = 1 is already set
2019-05-09 13:55:16,382 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 13:55:16.381984 duration_in_ms=9.805
2019-05-09 13:55:16,382 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.default.log_martians] at time 13:55:16.382399
2019-05-09 13:55:16,382 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2019-05-09 13:55:16,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.default.log_martians' in directory '/root'
2019-05-09 13:55:16,393 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.default.log_martians = 1 is already set
2019-05-09 13:55:16,394 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.default.log_martians] at time 13:55:16.394142 duration_in_ms=11.743
2019-05-09 13:55:16,394 [salt.state       :1780][INFO    ][10843] Running state [net.core.somaxconn] at time 13:55:16.394503
2019-05-09 13:55:16,394 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.core.somaxconn]
2019-05-09 13:55:16,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.core.somaxconn' in directory '/root'
2019-05-09 13:55:16,410 [salt.state       :300 ][INFO    ][10843] Sysctl value net.core.somaxconn = 4096 is already set
2019-05-09 13:55:16,410 [salt.state       :1951][INFO    ][10843] Completed state [net.core.somaxconn] at time 13:55:16.410687 duration_in_ms=16.185
2019-05-09 13:55:16,411 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.all.send_redirects] at time 13:55:16.411068
2019-05-09 13:55:16,411 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2019-05-09 13:55:16,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.all.send_redirects' in directory '/root'
2019-05-09 13:55:16,421 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.all.send_redirects = 0 is already set
2019-05-09 13:55:16,422 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.all.send_redirects] at time 13:55:16.422340 duration_in_ms=11.272
2019-05-09 13:55:16,422 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_tw_reuse] at time 13:55:16.422698
2019-05-09 13:55:16,423 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2019-05-09 13:55:16,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_tw_reuse' in directory '/root'
2019-05-09 13:55:16,441 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_tw_reuse = 1 is already set
2019-05-09 13:55:16,442 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_tw_reuse] at time 13:55:16.442005 duration_in_ms=19.305
2019-05-09 13:55:16,442 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.default.rp_filter] at time 13:55:16.442745
2019-05-09 13:55:16,443 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2019-05-09 13:55:16,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.default.rp_filter' in directory '/root'
2019-05-09 13:55:16,461 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.default.rp_filter = 1 is already set
2019-05-09 13:55:16,462 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.default.rp_filter] at time 13:55:16.462422 duration_in_ms=19.677
2019-05-09 13:55:16,463 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_fin_timeout] at time 13:55:16.463187
2019-05-09 13:55:16,463 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2019-05-09 13:55:16,465 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_fin_timeout' in directory '/root'
2019-05-09 13:55:16,480 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_fin_timeout = 30 is already set
2019-05-09 13:55:16,480 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_fin_timeout] at time 13:55:16.480808 duration_in_ms=17.622
2019-05-09 13:55:16,481 [salt.state       :1780][INFO    ][10843] Running state [net.core.netdev_budget_usecs] at time 13:55:16.481283
2019-05-09 13:55:16,481 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.core.netdev_budget_usecs]
2019-05-09 13:55:16,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.core.netdev_budget_usecs' in directory '/root'
2019-05-09 13:55:16,499 [salt.state       :300 ][INFO    ][10843] Sysctl value net.core.netdev_budget_usecs = 5000 is already set
2019-05-09 13:55:16,500 [salt.state       :1951][INFO    ][10843] Completed state [net.core.netdev_budget_usecs] at time 13:55:16.500579 duration_in_ms=19.295
2019-05-09 13:55:16,501 [salt.state       :1780][INFO    ][10843] Running state [kernel.panic] at time 13:55:16.501300
2019-05-09 13:55:16,501 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [kernel.panic]
2019-05-09 13:55:16,503 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n kernel.panic' in directory '/root'
2019-05-09 13:55:16,518 [salt.state       :300 ][INFO    ][10843] Sysctl value kernel.panic = 60 is already set
2019-05-09 13:55:16,519 [salt.state       :1951][INFO    ][10843] Completed state [kernel.panic] at time 13:55:16.518869 duration_in_ms=17.569
2019-05-09 13:55:16,519 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_keepalive_probes] at time 13:55:16.519601
2019-05-09 13:55:16,520 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2019-05-09 13:55:16,521 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_keepalive_probes' in directory '/root'
2019-05-09 13:55:16,534 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_keepalive_probes = 8 is already set
2019-05-09 13:55:16,535 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_keepalive_probes] at time 13:55:16.535305 duration_in_ms=15.705
2019-05-09 13:55:16,535 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.all.log_martians] at time 13:55:16.535775
2019-05-09 13:55:16,536 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2019-05-09 13:55:16,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.all.log_martians' in directory '/root'
2019-05-09 13:55:16,550 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.all.log_martians = 1 is already set
2019-05-09 13:55:16,551 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.all.log_martians] at time 13:55:16.551314 duration_in_ms=15.539
2019-05-09 13:55:16,551 [salt.state       :1780][INFO    ][10843] Running state [fs.suid_dumpable] at time 13:55:16.551794
2019-05-09 13:55:16,552 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [fs.suid_dumpable]
2019-05-09 13:55:16,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n fs.suid_dumpable' in directory '/root'
2019-05-09 13:55:16,569 [salt.state       :300 ][INFO    ][10843] Sysctl value fs.suid_dumpable = 0 is already set
2019-05-09 13:55:16,570 [salt.state       :1951][INFO    ][10843] Completed state [fs.suid_dumpable] at time 13:55:16.570313 duration_in_ms=18.518
2019-05-09 13:55:16,571 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.default.accept_redirects] at time 13:55:16.571229
2019-05-09 13:55:16,572 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2019-05-09 13:55:16,573 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.default.accept_redirects' in directory '/root'
2019-05-09 13:55:16,595 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.default.accept_redirects = 0 is already set
2019-05-09 13:55:16,596 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.default.accept_redirects] at time 13:55:16.596399 duration_in_ms=25.171
2019-05-09 13:55:16,597 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.default.secure_redirects] at time 13:55:16.597282
2019-05-09 13:55:16,598 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2019-05-09 13:55:16,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.default.secure_redirects' in directory '/root'
2019-05-09 13:55:16,621 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.default.secure_redirects = 0 is already set
2019-05-09 13:55:16,622 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.default.secure_redirects] at time 13:55:16.622309 duration_in_ms=25.026
2019-05-09 13:55:16,623 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.default.accept_source_route] at time 13:55:16.623207
2019-05-09 13:55:16,624 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2019-05-09 13:55:16,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.default.accept_source_route' in directory '/root'
2019-05-09 13:55:16,647 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.default.accept_source_route = 0 is already set
2019-05-09 13:55:16,648 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.default.accept_source_route] at time 13:55:16.648094 duration_in_ms=24.886
2019-05-09 13:55:16,649 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_keepalive_intvl] at time 13:55:16.648976
2019-05-09 13:55:16,649 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2019-05-09 13:55:16,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_keepalive_intvl' in directory '/root'
2019-05-09 13:55:16,673 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_keepalive_intvl = 3 is already set
2019-05-09 13:55:16,674 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_keepalive_intvl] at time 13:55:16.674057 duration_in_ms=25.081
2019-05-09 13:55:16,675 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_keepalive_time] at time 13:55:16.674972
2019-05-09 13:55:16,675 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2019-05-09 13:55:16,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_keepalive_time' in directory '/root'
2019-05-09 13:55:16,691 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_keepalive_time = 30 is already set
2019-05-09 13:55:16,692 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_keepalive_time] at time 13:55:16.692013 duration_in_ms=17.042
2019-05-09 13:55:16,692 [salt.state       :1780][INFO    ][10843] Running state [kernel.randomize_va_space] at time 13:55:16.692388
2019-05-09 13:55:16,692 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [kernel.randomize_va_space]
2019-05-09 13:55:16,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n kernel.randomize_va_space' in directory '/root'
2019-05-09 13:55:16,702 [salt.state       :300 ][INFO    ][10843] Sysctl value kernel.randomize_va_space = 2 is already set
2019-05-09 13:55:16,703 [salt.state       :1951][INFO    ][10843] Completed state [kernel.randomize_va_space] at time 13:55:16.703006 duration_in_ms=10.618
2019-05-09 13:55:16,703 [salt.state       :1780][INFO    ][10843] Running state [fs.file-max] at time 13:55:16.703368
2019-05-09 13:55:16,703 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [fs.file-max]
2019-05-09 13:55:16,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n fs.file-max' in directory '/root'
2019-05-09 13:55:16,713 [salt.state       :300 ][INFO    ][10843] Sysctl value fs.file-max = 124165 is already set
2019-05-09 13:55:16,713 [salt.state       :1951][INFO    ][10843] Completed state [fs.file-max] at time 13:55:16.713507 duration_in_ms=10.138
2019-05-09 13:55:16,713 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_syncookies] at time 13:55:16.713853
2019-05-09 13:55:16,714 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2019-05-09 13:55:16,715 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_syncookies' in directory '/root'
2019-05-09 13:55:16,723 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_syncookies = 1 is already set
2019-05-09 13:55:16,724 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_syncookies] at time 13:55:16.724160 duration_in_ms=10.307
2019-05-09 13:55:16,724 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_max_syn_backlog] at time 13:55:16.724518
2019-05-09 13:55:16,724 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2019-05-09 13:55:16,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_max_syn_backlog' in directory '/root'
2019-05-09 13:55:16,734 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_max_syn_backlog = 8192 is already set
2019-05-09 13:55:16,735 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_max_syn_backlog] at time 13:55:16.735303 duration_in_ms=10.785
2019-05-09 13:55:16,735 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.all.rp_filter] at time 13:55:16.735657
2019-05-09 13:55:16,736 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2019-05-09 13:55:16,736 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.all.rp_filter' in directory '/root'
2019-05-09 13:55:16,750 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.all.rp_filter = 1 is already set
2019-05-09 13:55:16,750 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.all.rp_filter] at time 13:55:16.750508 duration_in_ms=14.851
2019-05-09 13:55:16,750 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.all.accept_source_route] at time 13:55:16.750875
2019-05-09 13:55:16,751 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2019-05-09 13:55:16,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.all.accept_source_route' in directory '/root'
2019-05-09 13:55:16,761 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.all.accept_source_route = 0 is already set
2019-05-09 13:55:16,762 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.all.accept_source_route] at time 13:55:16.762318 duration_in_ms=11.441
2019-05-09 13:55:16,763 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.tcp_retries2] at time 13:55:16.763315
2019-05-09 13:55:16,764 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2019-05-09 13:55:16,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.tcp_retries2' in directory '/root'
2019-05-09 13:55:16,780 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.tcp_retries2 = 5 is already set
2019-05-09 13:55:16,781 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.tcp_retries2] at time 13:55:16.781267 duration_in_ms=17.953
2019-05-09 13:55:16,781 [salt.state       :1780][INFO    ][10843] Running state [net.core.netdev_max_backlog] at time 13:55:16.781655
2019-05-09 13:55:16,782 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.core.netdev_max_backlog]
2019-05-09 13:55:16,782 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.core.netdev_max_backlog' in directory '/root'
2019-05-09 13:55:16,792 [salt.state       :300 ][INFO    ][10843] Sysctl value net.core.netdev_max_backlog = 261144 is already set
2019-05-09 13:55:16,792 [salt.state       :1951][INFO    ][10843] Completed state [net.core.netdev_max_backlog] at time 13:55:16.792583 duration_in_ms=10.928
2019-05-09 13:55:16,793 [salt.state       :1780][INFO    ][10843] Running state [vm.swappiness] at time 13:55:16.792960
2019-05-09 13:55:16,793 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [vm.swappiness]
2019-05-09 13:55:16,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n vm.swappiness' in directory '/root'
2019-05-09 13:55:16,811 [salt.state       :300 ][INFO    ][10843] Sysctl value vm.swappiness = 10 is already set
2019-05-09 13:55:16,812 [salt.state       :1951][INFO    ][10843] Completed state [vm.swappiness] at time 13:55:16.812198 duration_in_ms=19.237
2019-05-09 13:55:16,812 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.all.secure_redirects] at time 13:55:16.812691
2019-05-09 13:55:16,813 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2019-05-09 13:55:16,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.all.secure_redirects' in directory '/root'
2019-05-09 13:55:16,826 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.all.secure_redirects = 0 is already set
2019-05-09 13:55:16,826 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.all.secure_redirects] at time 13:55:16.826741 duration_in_ms=14.05
2019-05-09 13:55:16,827 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.neigh.default.gc_thresh1] at time 13:55:16.827224
2019-05-09 13:55:16,827 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2019-05-09 13:55:16,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh1' in directory '/root'
2019-05-09 13:55:16,840 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.neigh.default.gc_thresh1 = 4096 is already set
2019-05-09 13:55:16,840 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 13:55:16.840896 duration_in_ms=13.672
2019-05-09 13:55:16,841 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.neigh.default.gc_thresh2] at time 13:55:16.841366
2019-05-09 13:55:16,841 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2019-05-09 13:55:16,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh2' in directory '/root'
2019-05-09 13:55:16,854 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.neigh.default.gc_thresh2 = 8192 is already set
2019-05-09 13:55:16,855 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 13:55:16.854934 duration_in_ms=13.568
2019-05-09 13:55:16,855 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.neigh.default.gc_thresh3] at time 13:55:16.855414
2019-05-09 13:55:16,855 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2019-05-09 13:55:16,856 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh3' in directory '/root'
2019-05-09 13:55:16,868 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.neigh.default.gc_thresh3 = 16384 is already set
2019-05-09 13:55:16,868 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 13:55:16.868802 duration_in_ms=13.389
2019-05-09 13:55:16,869 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.default.send_redirects] at time 13:55:16.869275
2019-05-09 13:55:16,869 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2019-05-09 13:55:16,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.default.send_redirects' in directory '/root'
2019-05-09 13:55:16,882 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.default.send_redirects = 0 is already set
2019-05-09 13:55:16,882 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.default.send_redirects] at time 13:55:16.882733 duration_in_ms=13.457
2019-05-09 13:55:16,883 [salt.state       :1780][INFO    ][10843] Running state [net.ipv4.conf.all.accept_redirects] at time 13:55:16.883228
2019-05-09 13:55:16,883 [salt.state       :1813][INFO    ][10843] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2019-05-09 13:55:16,884 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'sysctl -n net.ipv4.conf.all.accept_redirects' in directory '/root'
2019-05-09 13:55:16,896 [salt.state       :300 ][INFO    ][10843] Sysctl value net.ipv4.conf.all.accept_redirects = 0 is already set
2019-05-09 13:55:16,896 [salt.state       :1951][INFO    ][10843] Completed state [net.ipv4.conf.all.accept_redirects] at time 13:55:16.896746 duration_in_ms=13.518
2019-05-09 13:55:16,897 [salt.state       :1780][INFO    ][10843] Running state [linux_sysfs_package] at time 13:55:16.897232
2019-05-09 13:55:16,897 [salt.state       :1813][INFO    ][10843] Executing state pkg.installed for [linux_sysfs_package]
2019-05-09 13:55:16,910 [salt.state       :300 ][INFO    ][10843] All specified packages are already installed
2019-05-09 13:55:16,910 [salt.state       :1951][INFO    ][10843] Completed state [linux_sysfs_package] at time 13:55:16.910570 duration_in_ms=13.338
2019-05-09 13:55:16,913 [salt.state       :1780][INFO    ][10843] Running state [/etc/sysfs.d] at time 13:55:16.913902
2019-05-09 13:55:16,914 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/etc/sysfs.d]
2019-05-09 13:55:16,915 [salt.state       :300 ][INFO    ][10843] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2019-05-09 13:55:16,915 [salt.state       :1951][INFO    ][10843] Completed state [/etc/sysfs.d] at time 13:55:16.915407 duration_in_ms=1.505
2019-05-09 13:55:16,915 [salt.state       :1780][INFO    ][10843] Running state [ondemand] at time 13:55:16.915701
2019-05-09 13:55:16,916 [salt.state       :1813][INFO    ][10843] Executing state service.dead for [ondemand]
2019-05-09 13:55:16,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2019-05-09 13:55:16,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-05-09 13:55:16,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-05-09 13:55:16,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'runlevel' in directory '/root'
2019-05-09 13:55:16,985 [salt.state       :300 ][INFO    ][10843] The service ondemand is already dead
2019-05-09 13:55:16,985 [salt.state       :1951][INFO    ][10843] Completed state [ondemand] at time 13:55:16.985426 duration_in_ms=69.726
2019-05-09 13:55:16,985 [salt.state       :1780][INFO    ][10843] Running state [en_US.UTF-8] at time 13:55:16.985870
2019-05-09 13:55:16,986 [salt.state       :1813][INFO    ][10843] Executing state locale.present for [en_US.UTF-8]
2019-05-09 13:55:16,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'locale -a' in directory '/root'
2019-05-09 13:55:16,998 [salt.state       :300 ][INFO    ][10843] Locale en_US.UTF-8 is already present
2019-05-09 13:55:16,999 [salt.state       :1951][INFO    ][10843] Completed state [en_US.UTF-8] at time 13:55:16.999271 duration_in_ms=13.401
2019-05-09 13:55:17,002 [salt.state       :1780][INFO    ][10843] Running state [en_US.UTF-8] at time 13:55:17.002878
2019-05-09 13:55:17,003 [salt.state       :1813][INFO    ][10843] Executing state locale.system for [en_US.UTF-8]
2019-05-09 13:55:17,018 [salt.state       :300 ][INFO    ][10843] System locale en_US.UTF-8 already set
2019-05-09 13:55:17,019 [salt.state       :1951][INFO    ][10843] Completed state [en_US.UTF-8] at time 13:55:17.018945 duration_in_ms=16.067
2019-05-09 13:55:17,019 [salt.state       :1780][INFO    ][10843] Running state [glance] at time 13:55:17.019391
2019-05-09 13:55:17,019 [salt.state       :1813][INFO    ][10843] Executing state group.present for [glance]
2019-05-09 13:55:17,020 [salt.state       :300 ][INFO    ][10843] Group glance is present and up to date
2019-05-09 13:55:17,020 [salt.state       :1951][INFO    ][10843] Completed state [glance] at time 13:55:17.020479 duration_in_ms=1.088
2019-05-09 13:55:17,020 [salt.state       :1780][INFO    ][10843] Running state [keystone] at time 13:55:17.020909
2019-05-09 13:55:17,021 [salt.state       :1813][INFO    ][10843] Executing state group.present for [keystone]
2019-05-09 13:55:17,021 [salt.state       :300 ][INFO    ][10843] Group keystone is present and up to date
2019-05-09 13:55:17,021 [salt.state       :1951][INFO    ][10843] Completed state [keystone] at time 13:55:17.021857 duration_in_ms=0.947
2019-05-09 13:55:17,022 [salt.state       :1780][INFO    ][10843] Running state [keystone] at time 13:55:17.022297
2019-05-09 13:55:17,022 [salt.state       :1813][INFO    ][10843] Executing state user.present for [keystone]
2019-05-09 13:55:17,024 [salt.state       :300 ][INFO    ][10843] User keystone is present and up to date
2019-05-09 13:55:17,024 [salt.state       :1951][INFO    ][10843] Completed state [keystone] at time 13:55:17.024497 duration_in_ms=2.2
2019-05-09 13:55:17,026 [salt.state       :1780][INFO    ][10843] Running state [/var/lib/keystone] at time 13:55:17.026617
2019-05-09 13:55:17,026 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/var/lib/keystone]
2019-05-09 13:55:17,028 [salt.state       :300 ][INFO    ][10843] Directory /var/lib/keystone is in the correct state
Directory /var/lib/keystone updated
2019-05-09 13:55:17,028 [salt.state       :1951][INFO    ][10843] Completed state [/var/lib/keystone] at time 13:55:17.028319 duration_in_ms=1.702
2019-05-09 13:55:17,028 [salt.state       :1780][INFO    ][10843] Running state [/etc/sudoers.d/90-salt-user-keystone] at time 13:55:17.028604
2019-05-09 13:55:17,028 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/sudoers.d/90-salt-user-keystone]
2019-05-09 13:55:17,029 [salt.state       :300 ][INFO    ][10843] File /etc/sudoers.d/90-salt-user-keystone is not present
2019-05-09 13:55:17,029 [salt.state       :1951][INFO    ][10843] Completed state [/etc/sudoers.d/90-salt-user-keystone] at time 13:55:17.029481 duration_in_ms=0.877
2019-05-09 13:55:17,029 [salt.state       :1780][INFO    ][10843] Running state [barbican] at time 13:55:17.029753
2019-05-09 13:55:17,030 [salt.state       :1813][INFO    ][10843] Executing state group.present for [barbican]
2019-05-09 13:55:17,030 [salt.state       :300 ][INFO    ][10843] Group barbican is present and up to date
2019-05-09 13:55:17,030 [salt.state       :1951][INFO    ][10843] Completed state [barbican] at time 13:55:17.030673 duration_in_ms=0.92
2019-05-09 13:55:17,032 [salt.state       :1780][INFO    ][10843] Running state [barbican] at time 13:55:17.032400
2019-05-09 13:55:17,032 [salt.state       :1813][INFO    ][10843] Executing state user.present for [barbican]
2019-05-09 13:55:17,033 [salt.state       :300 ][INFO    ][10843] User barbican is present and up to date
2019-05-09 13:55:17,034 [salt.state       :1951][INFO    ][10843] Completed state [barbican] at time 13:55:17.034274 duration_in_ms=1.874
2019-05-09 13:55:17,036 [salt.state       :1780][INFO    ][10843] Running state [/var/lib/barbican] at time 13:55:17.036387
2019-05-09 13:55:17,036 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/var/lib/barbican]
2019-05-09 13:55:17,037 [salt.state       :300 ][INFO    ][10843] Directory /var/lib/barbican is in the correct state
Directory /var/lib/barbican updated
2019-05-09 13:55:17,037 [salt.state       :1951][INFO    ][10843] Completed state [/var/lib/barbican] at time 13:55:17.037867 duration_in_ms=1.48
2019-05-09 13:55:17,038 [salt.state       :1780][INFO    ][10843] Running state [/etc/sudoers.d/90-salt-user-barbican] at time 13:55:17.038169
2019-05-09 13:55:17,038 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/sudoers.d/90-salt-user-barbican]
2019-05-09 13:55:17,038 [salt.state       :300 ][INFO    ][10843] File /etc/sudoers.d/90-salt-user-barbican is not present
2019-05-09 13:55:17,039 [salt.state       :1951][INFO    ][10843] Completed state [/etc/sudoers.d/90-salt-user-barbican] at time 13:55:17.039029 duration_in_ms=0.86
2019-05-09 13:55:17,039 [salt.state       :1780][INFO    ][10843] Running state [root] at time 13:55:17.039294
2019-05-09 13:55:17,039 [salt.state       :1813][INFO    ][10843] Executing state group.present for [root]
2019-05-09 13:55:17,039 [salt.state       :300 ][INFO    ][10843] Group root is present and up to date
2019-05-09 13:55:17,040 [salt.state       :1951][INFO    ][10843] Completed state [root] at time 13:55:17.040175 duration_in_ms=0.881
2019-05-09 13:55:17,041 [salt.state       :1780][INFO    ][10843] Running state [root] at time 13:55:17.041897
2019-05-09 13:55:17,042 [salt.state       :1813][INFO    ][10843] Executing state user.present for [root]
2019-05-09 13:55:17,043 [salt.state       :300 ][INFO    ][10843] User root is present and up to date
2019-05-09 13:55:17,043 [salt.state       :1951][INFO    ][10843] Completed state [root] at time 13:55:17.043647 duration_in_ms=1.749
2019-05-09 13:55:17,045 [salt.state       :1780][INFO    ][10843] Running state [/root] at time 13:55:17.045684
2019-05-09 13:55:17,046 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/root]
2019-05-09 13:55:17,046 [salt.state       :300 ][INFO    ][10843] Directory /root is in the correct state
Directory /root updated
2019-05-09 13:55:17,047 [salt.state       :1951][INFO    ][10843] Completed state [/root] at time 13:55:17.047097 duration_in_ms=1.413
2019-05-09 13:55:17,047 [salt.state       :1780][INFO    ][10843] Running state [/etc/sudoers.d/90-salt-user-root] at time 13:55:17.047374
2019-05-09 13:55:17,047 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2019-05-09 13:55:17,048 [salt.state       :300 ][INFO    ][10843] File /etc/sudoers.d/90-salt-user-root is not present
2019-05-09 13:55:17,048 [salt.state       :1951][INFO    ][10843] Completed state [/etc/sudoers.d/90-salt-user-root] at time 13:55:17.048217 duration_in_ms=0.843
2019-05-09 13:55:17,048 [salt.state       :1780][INFO    ][10843] Running state [glance] at time 13:55:17.048619
2019-05-09 13:55:17,048 [salt.state       :1813][INFO    ][10843] Executing state user.present for [glance]
2019-05-09 13:55:17,050 [salt.state       :300 ][INFO    ][10843] User glance is present and up to date
2019-05-09 13:55:17,050 [salt.state       :1951][INFO    ][10843] Completed state [glance] at time 13:55:17.050422 duration_in_ms=1.803
2019-05-09 13:55:17,052 [salt.state       :1780][INFO    ][10843] Running state [/var/lib/glance] at time 13:55:17.052538
2019-05-09 13:55:17,052 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/var/lib/glance]
2019-05-09 13:55:17,053 [salt.state       :300 ][INFO    ][10843] Directory /var/lib/glance is in the correct state
Directory /var/lib/glance updated
2019-05-09 13:55:17,054 [salt.state       :1951][INFO    ][10843] Completed state [/var/lib/glance] at time 13:55:17.054043 duration_in_ms=1.504
2019-05-09 13:55:17,054 [salt.state       :1780][INFO    ][10843] Running state [/etc/sudoers.d/90-salt-user-glance] at time 13:55:17.054319
2019-05-09 13:55:17,054 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/sudoers.d/90-salt-user-glance]
2019-05-09 13:55:17,055 [salt.state       :300 ][INFO    ][10843] File /etc/sudoers.d/90-salt-user-glance is not present
2019-05-09 13:55:17,055 [salt.state       :1951][INFO    ][10843] Completed state [/etc/sudoers.d/90-salt-user-glance] at time 13:55:17.055222 duration_in_ms=0.903
2019-05-09 13:55:17,055 [salt.state       :1780][INFO    ][10843] Running state [ubuntu] at time 13:55:17.055488
2019-05-09 13:55:17,055 [salt.state       :1813][INFO    ][10843] Executing state group.present for [ubuntu]
2019-05-09 13:55:17,056 [salt.state       :300 ][INFO    ][10843] Group ubuntu is present and up to date
2019-05-09 13:55:17,056 [salt.state       :1951][INFO    ][10843] Completed state [ubuntu] at time 13:55:17.056375 duration_in_ms=0.887
2019-05-09 13:55:17,058 [salt.state       :1780][INFO    ][10843] Running state [ubuntu] at time 13:55:17.058099
2019-05-09 13:55:17,058 [salt.state       :1813][INFO    ][10843] Executing state user.present for [ubuntu]
2019-05-09 13:55:17,059 [salt.state       :300 ][INFO    ][10843] User ubuntu is present and up to date
2019-05-09 13:55:17,059 [salt.state       :1951][INFO    ][10843] Completed state [ubuntu] at time 13:55:17.059908 duration_in_ms=1.809
2019-05-09 13:55:17,062 [salt.state       :1780][INFO    ][10843] Running state [/home/ubuntu] at time 13:55:17.062369
2019-05-09 13:55:17,062 [salt.state       :1813][INFO    ][10843] Executing state file.directory for [/home/ubuntu]
2019-05-09 13:55:17,063 [salt.state       :300 ][INFO    ][10843] Directory /home/ubuntu is in the correct state
Directory /home/ubuntu updated
2019-05-09 13:55:17,063 [salt.state       :1951][INFO    ][10843] Completed state [/home/ubuntu] at time 13:55:17.063777 duration_in_ms=1.408
2019-05-09 13:55:17,065 [salt.state       :1780][INFO    ][10843] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 13:55:17.065572
2019-05-09 13:55:17,065 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2019-05-09 13:55:17,093 [salt.state       :300 ][INFO    ][10843] File /etc/sudoers.d/90-salt-user-ubuntu is in the correct state
2019-05-09 13:55:17,094 [salt.state       :1951][INFO    ][10843] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 13:55:17.093989 duration_in_ms=28.417
2019-05-09 13:55:17,097 [salt.state       :1780][INFO    ][10843] Running state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:55:17.097288
2019-05-09 13:55:17,097 [salt.state       :1813][INFO    ][10843] Executing state cron.present for [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log]
2019-05-09 13:55:17,098 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'crontab -u keystone -l' in directory '/root'
2019-05-09 13:55:17,112 [salt.state       :300 ][INFO    ][10843] Cron /var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log already present
2019-05-09 13:55:17,113 [salt.state       :1951][INFO    ][10843] Completed state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t credential >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:55:17.113283 duration_in_ms=15.995
2019-05-09 13:55:17,117 [salt.state       :1780][INFO    ][10843] Running state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:55:17.117659
2019-05-09 13:55:17,118 [salt.state       :1813][INFO    ][10843] Executing state cron.present for [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log]
2019-05-09 13:55:17,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'crontab -u keystone -l' in directory '/root'
2019-05-09 13:55:17,133 [salt.state       :300 ][INFO    ][10843] Cron /var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log already present
2019-05-09 13:55:17,133 [salt.state       :1951][INFO    ][10843] Completed state [/var/lib/keystone/keystone_keys_rotate.sh -r -s -t fernet >> /var/log/keystone/keystone-rotate.log 2>> /var/log/keystone/keystone-rotate.log] at time 13:55:17.133525 duration_in_ms=15.866
2019-05-09 13:55:17,134 [salt.state       :1780][INFO    ][10843] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 13:55:17.133988
2019-05-09 13:55:17,134 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2019-05-09 13:55:17,317 [salt.state       :300 ][INFO    ][10843] File /etc/security/limits.d/90-salt-cis.conf is in the correct state
2019-05-09 13:55:17,317 [salt.state       :1951][INFO    ][10843] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 13:55:17.317840 duration_in_ms=183.852
2019-05-09 13:55:17,318 [salt.state       :1780][INFO    ][10843] Running state [/etc/security/limits.d/90-salt-default.conf] at time 13:55:17.318131
2019-05-09 13:55:17,318 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2019-05-09 13:55:17,423 [salt.state       :300 ][INFO    ][10843] File /etc/security/limits.d/90-salt-default.conf is in the correct state
2019-05-09 13:55:17,423 [salt.state       :1951][INFO    ][10843] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 13:55:17.423606 duration_in_ms=105.474
2019-05-09 13:55:17,423 [salt.state       :1780][INFO    ][10843] Running state [apt-daily.timer] at time 13:55:17.423863
2019-05-09 13:55:17,424 [salt.state       :1813][INFO    ][10843] Executing state service.dead for [apt-daily.timer]
2019-05-09 13:55:17,424 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2019-05-09 13:55:17,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:55:17,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-05-09 13:55:17,480 [salt.state       :300 ][INFO    ][10843] The service apt-daily.timer is already dead
2019-05-09 13:55:17,481 [salt.state       :1951][INFO    ][10843] Completed state [apt-daily.timer] at time 13:55:17.481267 duration_in_ms=57.403
2019-05-09 13:55:17,481 [salt.state       :1780][INFO    ][10843] Running state [autofs] at time 13:55:17.481653
2019-05-09 13:55:17,481 [salt.state       :1813][INFO    ][10843] Executing state service.disabled for [autofs]
2019-05-09 13:55:17,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2019-05-09 13:55:17,499 [salt.state       :300 ][INFO    ][10843] The named service autofs is not available
2019-05-09 13:55:17,499 [salt.state       :1951][INFO    ][10843] Completed state [autofs] at time 13:55:17.499507 duration_in_ms=17.854
2019-05-09 13:55:17,499 [salt.state       :1780][INFO    ][10843] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 13:55:17.499852
2019-05-09 13:55:17,500 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2019-05-09 13:55:17,621 [salt.state       :300 ][INFO    ][10843] File /etc/systemd/system.conf.d/90-salt.conf is in the correct state
2019-05-09 13:55:17,621 [salt.state       :1951][INFO    ][10843] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 13:55:17.621849 duration_in_ms=121.997
2019-05-09 13:55:17,624 [salt.state       :1780][INFO    ][10843] Running state [service.systemctl_reload] at time 13:55:17.624366
2019-05-09 13:55:17,624 [salt.state       :1813][INFO    ][10843] Executing state module.wait for [service.systemctl_reload]
2019-05-09 13:55:17,624 [salt.state       :300 ][INFO    ][10843] No changes made for service.systemctl_reload
2019-05-09 13:55:17,625 [salt.state       :1951][INFO    ][10843] Completed state [service.systemctl_reload] at time 13:55:17.625174 duration_in_ms=0.808
2019-05-09 13:55:17,625 [salt.state       :1780][INFO    ][10843] Running state [/etc/shadow] at time 13:55:17.625433
2019-05-09 13:55:17,625 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/shadow]
2019-05-09 13:55:17,626 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,626 [salt.state       :300 ][INFO    ][10843] File /etc/shadow exists with proper permissions. No changes made.
2019-05-09 13:55:17,627 [salt.state       :1951][INFO    ][10843] Completed state [/etc/shadow] at time 13:55:17.626995 duration_in_ms=1.562
2019-05-09 13:55:17,627 [salt.state       :1780][INFO    ][10843] Running state [/etc/gshadow] at time 13:55:17.627240
2019-05-09 13:55:17,627 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/gshadow]
2019-05-09 13:55:17,627 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,628 [salt.state       :300 ][INFO    ][10843] File /etc/gshadow exists with proper permissions. No changes made.
2019-05-09 13:55:17,628 [salt.state       :1951][INFO    ][10843] Completed state [/etc/gshadow] at time 13:55:17.628698 duration_in_ms=1.458
2019-05-09 13:55:17,628 [salt.state       :1780][INFO    ][10843] Running state [/etc/group-] at time 13:55:17.628936
2019-05-09 13:55:17,629 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/group-]
2019-05-09 13:55:17,629 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,630 [salt.state       :300 ][INFO    ][10843] File /etc/group- exists with proper permissions. No changes made.
2019-05-09 13:55:17,630 [salt.state       :1951][INFO    ][10843] Completed state [/etc/group-] at time 13:55:17.630416 duration_in_ms=1.48
2019-05-09 13:55:17,630 [salt.state       :1780][INFO    ][10843] Running state [/etc/group] at time 13:55:17.630662
2019-05-09 13:55:17,630 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/group]
2019-05-09 13:55:17,631 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,631 [salt.state       :300 ][INFO    ][10843] File /etc/group exists with proper permissions. No changes made.
2019-05-09 13:55:17,632 [salt.state       :1951][INFO    ][10843] Completed state [/etc/group] at time 13:55:17.632114 duration_in_ms=1.452
2019-05-09 13:55:17,632 [salt.state       :1780][INFO    ][10843] Running state [/etc/passwd-] at time 13:55:17.632351
2019-05-09 13:55:17,632 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/passwd-]
2019-05-09 13:55:17,632 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,633 [salt.state       :300 ][INFO    ][10843] File /etc/passwd- exists with proper permissions. No changes made.
2019-05-09 13:55:17,633 [salt.state       :1951][INFO    ][10843] Completed state [/etc/passwd-] at time 13:55:17.633759 duration_in_ms=1.408
2019-05-09 13:55:17,634 [salt.state       :1780][INFO    ][10843] Running state [/etc/passwd] at time 13:55:17.633997
2019-05-09 13:55:17,634 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/passwd]
2019-05-09 13:55:17,634 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,635 [salt.state       :300 ][INFO    ][10843] File /etc/passwd exists with proper permissions. No changes made.
2019-05-09 13:55:17,635 [salt.state       :1951][INFO    ][10843] Completed state [/etc/passwd] at time 13:55:17.635449 duration_in_ms=1.452
2019-05-09 13:55:17,635 [salt.state       :1780][INFO    ][10843] Running state [/etc/gshadow-] at time 13:55:17.635686
2019-05-09 13:55:17,635 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/gshadow-]
2019-05-09 13:55:17,636 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,636 [salt.state       :300 ][INFO    ][10843] File /etc/gshadow- exists with proper permissions. No changes made.
2019-05-09 13:55:17,637 [salt.state       :1951][INFO    ][10843] Completed state [/etc/gshadow-] at time 13:55:17.637084 duration_in_ms=1.398
2019-05-09 13:55:17,637 [salt.state       :1780][INFO    ][10843] Running state [/etc/shadow-] at time 13:55:17.637322
2019-05-09 13:55:17,637 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/shadow-]
2019-05-09 13:55:17,637 [salt.loaded.int.states.file:2298][WARNING ][10843] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 13:55:17,638 [salt.state       :300 ][INFO    ][10843] File /etc/shadow- exists with proper permissions. No changes made.
2019-05-09 13:55:17,638 [salt.state       :1951][INFO    ][10843] Completed state [/etc/shadow-] at time 13:55:17.638796 duration_in_ms=1.463
2019-05-09 13:55:17,639 [salt.state       :1780][INFO    ][10843] Running state [/etc/issue] at time 13:55:17.639047
2019-05-09 13:55:17,639 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/issue]
2019-05-09 13:55:17,640 [salt.state       :300 ][INFO    ][10843] File /etc/issue is in the correct state
2019-05-09 13:55:17,641 [salt.state       :1951][INFO    ][10843] Completed state [/etc/issue] at time 13:55:17.640992 duration_in_ms=1.944
2019-05-09 13:55:17,641 [salt.state       :1780][INFO    ][10843] Running state [/etc/hostname] at time 13:55:17.641238
2019-05-09 13:55:17,641 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/hostname]
2019-05-09 13:55:17,661 [salt.state       :300 ][INFO    ][10843] File /etc/hostname is in the correct state
2019-05-09 13:55:17,661 [salt.state       :1951][INFO    ][10843] Completed state [/etc/hostname] at time 13:55:17.661332 duration_in_ms=20.094
2019-05-09 13:55:17,663 [salt.state       :1780][INFO    ][10843] Running state [hostname ctl02] at time 13:55:17.663392
2019-05-09 13:55:17,663 [salt.state       :1813][INFO    ][10843] Executing state cmd.run for [hostname ctl02]
2019-05-09 13:55:17,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'test "$(hostname)" = "ctl02"' in directory '/root'
2019-05-09 13:55:17,677 [salt.state       :300 ][INFO    ][10843] unless execution succeeded
2019-05-09 13:55:17,678 [salt.state       :1951][INFO    ][10843] Completed state [hostname ctl02] at time 13:55:17.678081 duration_in_ms=14.689
2019-05-09 13:55:17,678 [salt.state       :1780][INFO    ][10843] Running state [mdb02] at time 13:55:17.678879
2019-05-09 13:55:17,679 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb02]
2019-05-09 13:55:17,680 [salt.state       :300 ][INFO    ][10843] Host mdb02 (192.168.10.33) already present
2019-05-09 13:55:17,680 [salt.state       :1951][INFO    ][10843] Completed state [mdb02] at time 13:55:17.680454 duration_in_ms=1.575
2019-05-09 13:55:17,680 [salt.state       :1780][INFO    ][10843] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 13:55:17.680866
2019-05-09 13:55:17,681 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,681 [salt.state       :300 ][INFO    ][10843] Host mdb02.mcp-ovs-dpdk-ha.local (192.168.10.33) already present
2019-05-09 13:55:17,681 [salt.state       :1951][INFO    ][10843] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 13:55:17.681927 duration_in_ms=1.06
2019-05-09 13:55:17,682 [salt.state       :1780][INFO    ][10843] Running state [mdb03] at time 13:55:17.682421
2019-05-09 13:55:17,682 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb03]
2019-05-09 13:55:17,683 [salt.state       :300 ][INFO    ][10843] Host mdb03 (192.168.10.34) already present
2019-05-09 13:55:17,683 [salt.state       :1951][INFO    ][10843] Completed state [mdb03] at time 13:55:17.683630 duration_in_ms=1.209
2019-05-09 13:55:17,684 [salt.state       :1780][INFO    ][10843] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 13:55:17.684102
2019-05-09 13:55:17,684 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,685 [salt.state       :300 ][INFO    ][10843] Host mdb03.mcp-ovs-dpdk-ha.local (192.168.10.34) already present
2019-05-09 13:55:17,685 [salt.state       :1951][INFO    ][10843] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 13:55:17.685265 duration_in_ms=1.163
2019-05-09 13:55:17,685 [salt.state       :1780][INFO    ][10843] Running state [mdb01] at time 13:55:17.685710
2019-05-09 13:55:17,686 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb01]
2019-05-09 13:55:17,687 [salt.state       :300 ][INFO    ][10843] Host mdb01 (192.168.10.32) already present
2019-05-09 13:55:17,687 [salt.state       :1951][INFO    ][10843] Completed state [mdb01] at time 13:55:17.687220 duration_in_ms=1.51
2019-05-09 13:55:17,687 [salt.state       :1780][INFO    ][10843] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 13:55:17.687655
2019-05-09 13:55:17,687 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,688 [salt.state       :300 ][INFO    ][10843] Host mdb01.mcp-ovs-dpdk-ha.local (192.168.10.32) already present
2019-05-09 13:55:17,688 [salt.state       :1951][INFO    ][10843] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 13:55:17.688756 duration_in_ms=1.101
2019-05-09 13:55:17,689 [salt.state       :1780][INFO    ][10843] Running state [mdb] at time 13:55:17.689192
2019-05-09 13:55:17,689 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb]
2019-05-09 13:55:17,690 [salt.state       :300 ][INFO    ][10843] Host mdb (192.168.10.31) already present
2019-05-09 13:55:17,690 [salt.state       :1951][INFO    ][10843] Completed state [mdb] at time 13:55:17.690275 duration_in_ms=1.083
2019-05-09 13:55:17,690 [salt.state       :1780][INFO    ][10843] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 13:55:17.690706
2019-05-09 13:55:17,691 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,693 [salt.state       :300 ][INFO    ][10843] Host mdb.mcp-ovs-dpdk-ha.local (192.168.10.31) already present
2019-05-09 13:55:17,693 [salt.state       :1951][INFO    ][10843] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 13:55:17.693448 duration_in_ms=2.741
2019-05-09 13:55:17,693 [salt.state       :1780][INFO    ][10843] Running state [cfg01] at time 13:55:17.693892
2019-05-09 13:55:17,694 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cfg01]
2019-05-09 13:55:17,694 [salt.state       :300 ][INFO    ][10843] Host cfg01 (192.168.10.11) already present
2019-05-09 13:55:17,695 [salt.state       :1951][INFO    ][10843] Completed state [cfg01] at time 13:55:17.695041 duration_in_ms=1.149
2019-05-09 13:55:17,695 [salt.state       :1780][INFO    ][10843] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:55:17.695465
2019-05-09 13:55:17,695 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,696 [salt.state       :300 ][INFO    ][10843] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2019-05-09 13:55:17,696 [salt.state       :1951][INFO    ][10843] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:55:17.696520 duration_in_ms=1.055
2019-05-09 13:55:17,697 [salt.state       :1780][INFO    ][10843] Running state [prx01] at time 13:55:17.696959
2019-05-09 13:55:17,697 [salt.state       :1813][INFO    ][10843] Executing state host.present for [prx01]
2019-05-09 13:55:17,697 [salt.state       :300 ][INFO    ][10843] Host prx01 (192.168.10.14) already present
2019-05-09 13:55:17,698 [salt.state       :1951][INFO    ][10843] Completed state [prx01] at time 13:55:17.698055 duration_in_ms=1.096
2019-05-09 13:55:17,698 [salt.state       :1780][INFO    ][10843] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 13:55:17.698488
2019-05-09 13:55:17,698 [salt.state       :1813][INFO    ][10843] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,699 [salt.state       :300 ][INFO    ][10843] Host prx01.mcp-ovs-dpdk-ha.local (192.168.10.14) already present
2019-05-09 13:55:17,699 [salt.state       :1951][INFO    ][10843] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 13:55:17.699558 duration_in_ms=1.07
2019-05-09 13:55:17,700 [salt.state       :1780][INFO    ][10843] Running state [kvm01] at time 13:55:17.699988
2019-05-09 13:55:17,700 [salt.state       :1813][INFO    ][10843] Executing state host.present for [kvm01]
2019-05-09 13:55:17,700 [salt.state       :300 ][INFO    ][10843] Host kvm01 (192.168.10.20) already present
2019-05-09 13:55:17,701 [salt.state       :1951][INFO    ][10843] Completed state [kvm01] at time 13:55:17.701071 duration_in_ms=1.083
2019-05-09 13:55:17,701 [salt.state       :1780][INFO    ][10843] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 13:55:17.701494
2019-05-09 13:55:17,701 [salt.state       :1813][INFO    ][10843] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,702 [salt.state       :300 ][INFO    ][10843] Host kvm01.mcp-ovs-dpdk-ha.local (192.168.10.20) already present
2019-05-09 13:55:17,702 [salt.state       :1951][INFO    ][10843] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 13:55:17.702589 duration_in_ms=1.095
2019-05-09 13:55:17,703 [salt.state       :1780][INFO    ][10843] Running state [kvm03] at time 13:55:17.703037
2019-05-09 13:55:17,703 [salt.state       :1813][INFO    ][10843] Executing state host.present for [kvm03]
2019-05-09 13:55:17,703 [salt.state       :300 ][INFO    ][10843] Host kvm03 (192.168.10.22) already present
2019-05-09 13:55:17,704 [salt.state       :1951][INFO    ][10843] Completed state [kvm03] at time 13:55:17.704131 duration_in_ms=1.094
2019-05-09 13:55:17,704 [salt.state       :1780][INFO    ][10843] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 13:55:17.704555
2019-05-09 13:55:17,704 [salt.state       :1813][INFO    ][10843] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,705 [salt.state       :300 ][INFO    ][10843] Host kvm03.mcp-ovs-dpdk-ha.local (192.168.10.22) already present
2019-05-09 13:55:17,705 [salt.state       :1951][INFO    ][10843] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 13:55:17.705611 duration_in_ms=1.056
2019-05-09 13:55:17,706 [salt.state       :1780][INFO    ][10843] Running state [kvm02] at time 13:55:17.706072
2019-05-09 13:55:17,706 [salt.state       :1813][INFO    ][10843] Executing state host.present for [kvm02]
2019-05-09 13:55:17,706 [salt.state       :300 ][INFO    ][10843] Host kvm02 (192.168.10.21) already present
2019-05-09 13:55:17,707 [salt.state       :1951][INFO    ][10843] Completed state [kvm02] at time 13:55:17.707143 duration_in_ms=1.071
2019-05-09 13:55:17,707 [salt.state       :1780][INFO    ][10843] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 13:55:17.707574
2019-05-09 13:55:17,707 [salt.state       :1813][INFO    ][10843] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,708 [salt.state       :300 ][INFO    ][10843] Host kvm02.mcp-ovs-dpdk-ha.local (192.168.10.21) already present
2019-05-09 13:55:17,708 [salt.state       :1951][INFO    ][10843] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 13:55:17.708616 duration_in_ms=1.042
2019-05-09 13:55:17,709 [salt.state       :1780][INFO    ][10843] Running state [dbs] at time 13:55:17.709052
2019-05-09 13:55:17,709 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs]
2019-05-09 13:55:17,709 [salt.state       :300 ][INFO    ][10843] Host dbs (192.168.10.23) already present
2019-05-09 13:55:17,710 [salt.state       :1951][INFO    ][10843] Completed state [dbs] at time 13:55:17.710117 duration_in_ms=1.065
2019-05-09 13:55:17,710 [salt.state       :1780][INFO    ][10843] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 13:55:17.710546
2019-05-09 13:55:17,710 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,711 [salt.state       :300 ][INFO    ][10843] Host dbs.mcp-ovs-dpdk-ha.local (192.168.10.23) already present
2019-05-09 13:55:17,711 [salt.state       :1951][INFO    ][10843] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 13:55:17.711611 duration_in_ms=1.065
2019-05-09 13:55:17,712 [salt.state       :1780][INFO    ][10843] Running state [prx] at time 13:55:17.712044
2019-05-09 13:55:17,712 [salt.state       :1813][INFO    ][10843] Executing state host.present for [prx]
2019-05-09 13:55:17,712 [salt.state       :300 ][INFO    ][10843] Host prx (192.168.10.13) already present
2019-05-09 13:55:17,713 [salt.state       :1951][INFO    ][10843] Completed state [prx] at time 13:55:17.713147 duration_in_ms=1.103
2019-05-09 13:55:17,713 [salt.state       :1780][INFO    ][10843] Running state [prx.mcp-ovs-dpdk-ha.local] at time 13:55:17.713589
2019-05-09 13:55:17,713 [salt.state       :1813][INFO    ][10843] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,714 [salt.state       :300 ][INFO    ][10843] Host prx.mcp-ovs-dpdk-ha.local (192.168.10.13) already present
2019-05-09 13:55:17,714 [salt.state       :1951][INFO    ][10843] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 13:55:17.714672 duration_in_ms=1.083
2019-05-09 13:55:17,715 [salt.state       :1780][INFO    ][10843] Running state [prx02] at time 13:55:17.715123
2019-05-09 13:55:17,715 [salt.state       :1813][INFO    ][10843] Executing state host.present for [prx02]
2019-05-09 13:55:17,715 [salt.state       :300 ][INFO    ][10843] Host prx02 (192.168.10.15) already present
2019-05-09 13:55:17,716 [salt.state       :1951][INFO    ][10843] Completed state [prx02] at time 13:55:17.716171 duration_in_ms=1.048
2019-05-09 13:55:17,716 [salt.state       :1780][INFO    ][10843] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 13:55:17.716619
2019-05-09 13:55:17,716 [salt.state       :1813][INFO    ][10843] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,717 [salt.state       :300 ][INFO    ][10843] Host prx02.mcp-ovs-dpdk-ha.local (192.168.10.15) already present
2019-05-09 13:55:17,717 [salt.state       :1951][INFO    ][10843] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 13:55:17.717663 duration_in_ms=1.044
2019-05-09 13:55:17,718 [salt.state       :1780][INFO    ][10843] Running state [msg02] at time 13:55:17.718129
2019-05-09 13:55:17,718 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg02]
2019-05-09 13:55:17,719 [salt.state       :300 ][INFO    ][10843] Host msg02 (192.168.10.29) already present
2019-05-09 13:55:17,719 [salt.state       :1951][INFO    ][10843] Completed state [msg02] at time 13:55:17.719203 duration_in_ms=1.074
2019-05-09 13:55:17,719 [salt.state       :1780][INFO    ][10843] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 13:55:17.719648
2019-05-09 13:55:17,719 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,720 [salt.state       :300 ][INFO    ][10843] Host msg02.mcp-ovs-dpdk-ha.local (192.168.10.29) already present
2019-05-09 13:55:17,720 [salt.state       :1951][INFO    ][10843] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 13:55:17.720694 duration_in_ms=1.046
2019-05-09 13:55:17,721 [salt.state       :1780][INFO    ][10843] Running state [msg03] at time 13:55:17.721142
2019-05-09 13:55:17,721 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg03]
2019-05-09 13:55:17,722 [salt.state       :300 ][INFO    ][10843] Host msg03 (192.168.10.30) already present
2019-05-09 13:55:17,722 [salt.state       :1951][INFO    ][10843] Completed state [msg03] at time 13:55:17.722220 duration_in_ms=1.078
2019-05-09 13:55:17,722 [salt.state       :1780][INFO    ][10843] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 13:55:17.722665
2019-05-09 13:55:17,722 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,723 [salt.state       :300 ][INFO    ][10843] Host msg03.mcp-ovs-dpdk-ha.local (192.168.10.30) already present
2019-05-09 13:55:17,723 [salt.state       :1951][INFO    ][10843] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 13:55:17.723740 duration_in_ms=1.075
2019-05-09 13:55:17,724 [salt.state       :1780][INFO    ][10843] Running state [msg01] at time 13:55:17.724184
2019-05-09 13:55:17,724 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg01]
2019-05-09 13:55:17,725 [salt.state       :300 ][INFO    ][10843] Host msg01 (192.168.10.28) already present
2019-05-09 13:55:17,725 [salt.state       :1951][INFO    ][10843] Completed state [msg01] at time 13:55:17.725397 duration_in_ms=1.213
2019-05-09 13:55:17,725 [salt.state       :1780][INFO    ][10843] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 13:55:17.725856
2019-05-09 13:55:17,726 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,726 [salt.state       :300 ][INFO    ][10843] Host msg01.mcp-ovs-dpdk-ha.local (192.168.10.28) already present
2019-05-09 13:55:17,726 [salt.state       :1951][INFO    ][10843] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 13:55:17.726936 duration_in_ms=1.079
2019-05-09 13:55:17,727 [salt.state       :1780][INFO    ][10843] Running state [msg] at time 13:55:17.727378
2019-05-09 13:55:17,727 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg]
2019-05-09 13:55:17,728 [salt.state       :300 ][INFO    ][10843] Host msg (192.168.10.27) already present
2019-05-09 13:55:17,728 [salt.state       :1951][INFO    ][10843] Completed state [msg] at time 13:55:17.728413 duration_in_ms=1.035
2019-05-09 13:55:17,728 [salt.state       :1780][INFO    ][10843] Running state [msg.mcp-ovs-dpdk-ha.local] at time 13:55:17.728853
2019-05-09 13:55:17,729 [salt.state       :1813][INFO    ][10843] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,729 [salt.state       :300 ][INFO    ][10843] Host msg.mcp-ovs-dpdk-ha.local (192.168.10.27) already present
2019-05-09 13:55:17,729 [salt.state       :1951][INFO    ][10843] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 13:55:17.729887 duration_in_ms=1.034
2019-05-09 13:55:17,730 [salt.state       :1780][INFO    ][10843] Running state [cfg01] at time 13:55:17.730349
2019-05-09 13:55:17,730 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cfg01]
2019-05-09 13:55:17,731 [salt.state       :300 ][INFO    ][10843] Host cfg01 (192.168.10.11) already present
2019-05-09 13:55:17,731 [salt.state       :1951][INFO    ][10843] Completed state [cfg01] at time 13:55:17.731400 duration_in_ms=1.051
2019-05-09 13:55:17,731 [salt.state       :1780][INFO    ][10843] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:55:17.731852
2019-05-09 13:55:17,732 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,732 [salt.state       :300 ][INFO    ][10843] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2019-05-09 13:55:17,732 [salt.state       :1951][INFO    ][10843] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 13:55:17.732887 duration_in_ms=1.035
2019-05-09 13:55:17,733 [salt.state       :1780][INFO    ][10843] Running state [cmp002] at time 13:55:17.733337
2019-05-09 13:55:17,733 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cmp002]
2019-05-09 13:55:17,734 [salt.state       :300 ][INFO    ][10843] Host cmp002 (192.168.10.56) already present
2019-05-09 13:55:17,734 [salt.state       :1951][INFO    ][10843] Completed state [cmp002] at time 13:55:17.734414 duration_in_ms=1.077
2019-05-09 13:55:17,734 [salt.state       :1780][INFO    ][10843] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 13:55:17.734887
2019-05-09 13:55:17,735 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,735 [salt.state       :300 ][INFO    ][10843] Host cmp002.mcp-ovs-dpdk-ha.local (192.168.10.56) already present
2019-05-09 13:55:17,735 [salt.state       :1951][INFO    ][10843] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 13:55:17.735927 duration_in_ms=1.04
2019-05-09 13:55:17,736 [salt.state       :1780][INFO    ][10843] Running state [cmp001] at time 13:55:17.736376
2019-05-09 13:55:17,736 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cmp001]
2019-05-09 13:55:17,737 [salt.state       :300 ][INFO    ][10843] Host cmp001 (192.168.10.55) already present
2019-05-09 13:55:17,737 [salt.state       :1951][INFO    ][10843] Completed state [cmp001] at time 13:55:17.737414 duration_in_ms=1.038
2019-05-09 13:55:17,737 [salt.state       :1780][INFO    ][10843] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 13:55:17.737860
2019-05-09 13:55:17,738 [salt.state       :1813][INFO    ][10843] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,738 [salt.state       :300 ][INFO    ][10843] Host cmp001.mcp-ovs-dpdk-ha.local (192.168.10.55) already present
2019-05-09 13:55:17,739 [salt.state       :1951][INFO    ][10843] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 13:55:17.738949 duration_in_ms=1.088
2019-05-09 13:55:17,739 [salt.state       :1780][INFO    ][10843] Running state [dbs01] at time 13:55:17.739409
2019-05-09 13:55:17,739 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs01]
2019-05-09 13:55:17,740 [salt.state       :300 ][INFO    ][10843] Host dbs01 (192.168.10.24) already present
2019-05-09 13:55:17,740 [salt.state       :1951][INFO    ][10843] Completed state [dbs01] at time 13:55:17.740443 duration_in_ms=1.034
2019-05-09 13:55:17,740 [salt.state       :1780][INFO    ][10843] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 13:55:17.740895
2019-05-09 13:55:17,741 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,741 [salt.state       :300 ][INFO    ][10843] Host dbs01.mcp-ovs-dpdk-ha.local (192.168.10.24) already present
2019-05-09 13:55:17,742 [salt.state       :1951][INFO    ][10843] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 13:55:17.741975 duration_in_ms=1.08
2019-05-09 13:55:17,742 [salt.state       :1780][INFO    ][10843] Running state [dbs02] at time 13:55:17.742459
2019-05-09 13:55:17,742 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs02]
2019-05-09 13:55:17,743 [salt.state       :300 ][INFO    ][10843] Host dbs02 (192.168.10.25) already present
2019-05-09 13:55:17,743 [salt.state       :1951][INFO    ][10843] Completed state [dbs02] at time 13:55:17.743526 duration_in_ms=1.067
2019-05-09 13:55:17,744 [salt.state       :1780][INFO    ][10843] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 13:55:17.743980
2019-05-09 13:55:17,744 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,744 [salt.state       :300 ][INFO    ][10843] Host dbs02.mcp-ovs-dpdk-ha.local (192.168.10.25) already present
2019-05-09 13:55:17,745 [salt.state       :1951][INFO    ][10843] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 13:55:17.745020 duration_in_ms=1.04
2019-05-09 13:55:17,745 [salt.state       :1780][INFO    ][10843] Running state [dbs03] at time 13:55:17.745478
2019-05-09 13:55:17,745 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs03]
2019-05-09 13:55:17,746 [salt.state       :300 ][INFO    ][10843] Host dbs03 (192.168.10.26) already present
2019-05-09 13:55:17,746 [salt.state       :1951][INFO    ][10843] Completed state [dbs03] at time 13:55:17.746545 duration_in_ms=1.067
2019-05-09 13:55:17,747 [salt.state       :1780][INFO    ][10843] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 13:55:17.747014
2019-05-09 13:55:17,747 [salt.state       :1813][INFO    ][10843] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,747 [salt.state       :300 ][INFO    ][10843] Host dbs03.mcp-ovs-dpdk-ha.local (192.168.10.26) already present
2019-05-09 13:55:17,748 [salt.state       :1951][INFO    ][10843] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 13:55:17.748069 duration_in_ms=1.054
2019-05-09 13:55:17,748 [salt.state       :1780][INFO    ][10843] Running state [mas01] at time 13:55:17.748525
2019-05-09 13:55:17,748 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mas01]
2019-05-09 13:55:17,749 [salt.state       :300 ][INFO    ][10843] Host mas01 (192.168.10.12) already present
2019-05-09 13:55:17,749 [salt.state       :1951][INFO    ][10843] Completed state [mas01] at time 13:55:17.749574 duration_in_ms=1.049
2019-05-09 13:55:17,750 [salt.state       :1780][INFO    ][10843] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 13:55:17.750067
2019-05-09 13:55:17,750 [salt.state       :1813][INFO    ][10843] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,750 [salt.state       :300 ][INFO    ][10843] Host mas01.mcp-ovs-dpdk-ha.local (192.168.10.12) already present
2019-05-09 13:55:17,751 [salt.state       :1951][INFO    ][10843] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 13:55:17.751148 duration_in_ms=1.08
2019-05-09 13:55:17,751 [salt.state       :1780][INFO    ][10843] Running state [ctl02] at time 13:55:17.751606
2019-05-09 13:55:17,751 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl02]
2019-05-09 13:55:17,752 [salt.state       :300 ][INFO    ][10843] Host ctl02 (192.168.10.37) already present
2019-05-09 13:55:17,752 [salt.state       :1951][INFO    ][10843] Completed state [ctl02] at time 13:55:17.752664 duration_in_ms=1.058
2019-05-09 13:55:17,753 [salt.state       :1780][INFO    ][10843] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 13:55:17.753122
2019-05-09 13:55:17,753 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,753 [salt.state       :300 ][INFO    ][10843] Host ctl02.mcp-ovs-dpdk-ha.local (192.168.10.37) already present
2019-05-09 13:55:17,754 [salt.state       :1951][INFO    ][10843] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 13:55:17.754195 duration_in_ms=1.073
2019-05-09 13:55:17,757 [salt.state       :1780][INFO    ][10843] Running state [file.replace] at time 13:55:17.757093
2019-05-09 13:55:17,757 [salt.state       :1813][INFO    ][10843] Executing state module.run for [file.replace]
2019-05-09 13:55:17,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'grep -q "ctl02 ctl02.mcp-ovs-dpdk-ha.local" /etc/hosts' in directory '/root'
2019-05-09 13:55:17,779 [salt.utils.decorators:613 ][WARNING ][10843] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-05-09 13:55:17,784 [salt.state       :300 ][INFO    ][10843] {'ret': '--- \n+++ \n@@ -28,7 +28,7 @@\n 192.168.10.25\t\tdbs02 dbs02.mcp-ovs-dpdk-ha.local\n 192.168.10.26\t\tdbs03 dbs03.mcp-ovs-dpdk-ha.local\n 192.168.10.12\t\tmas01 mas01.mcp-ovs-dpdk-ha.local\n-192.168.10.37\t\tctl02 ctl02.mcp-ovs-dpdk-ha.local\n+192.168.10.37\t\tctl02.mcp-ovs-dpdk-ha.local ctl02\n 192.168.10.38\t\tctl03 ctl03.mcp-ovs-dpdk-ha.local\n 192.168.10.36\t\tctl01 ctl01.mcp-ovs-dpdk-ha.local\n 192.168.10.35\t\tctl ctl.mcp-ovs-dpdk-ha.local\n'}
2019-05-09 13:55:17,784 [salt.state       :1951][INFO    ][10843] Completed state [file.replace] at time 13:55:17.784481 duration_in_ms=27.388
2019-05-09 13:55:17,785 [salt.state       :1780][INFO    ][10843] Running state [ctl03] at time 13:55:17.785375
2019-05-09 13:55:17,785 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl03]
2019-05-09 13:55:17,786 [salt.state       :300 ][INFO    ][10843] Host ctl03 (192.168.10.38) already present
2019-05-09 13:55:17,786 [salt.state       :1951][INFO    ][10843] Completed state [ctl03] at time 13:55:17.786755 duration_in_ms=1.38
2019-05-09 13:55:17,787 [salt.state       :1780][INFO    ][10843] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 13:55:17.787263
2019-05-09 13:55:17,787 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,788 [salt.state       :300 ][INFO    ][10843] Host ctl03.mcp-ovs-dpdk-ha.local (192.168.10.38) already present
2019-05-09 13:55:17,788 [salt.state       :1951][INFO    ][10843] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 13:55:17.788366 duration_in_ms=1.103
2019-05-09 13:55:17,788 [salt.state       :1780][INFO    ][10843] Running state [ctl01] at time 13:55:17.788857
2019-05-09 13:55:17,789 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl01]
2019-05-09 13:55:17,789 [salt.state       :300 ][INFO    ][10843] Host ctl01 (192.168.10.36) already present
2019-05-09 13:55:17,789 [salt.state       :1951][INFO    ][10843] Completed state [ctl01] at time 13:55:17.789931 duration_in_ms=1.074
2019-05-09 13:55:17,790 [salt.state       :1780][INFO    ][10843] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 13:55:17.790432
2019-05-09 13:55:17,790 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,791 [salt.state       :300 ][INFO    ][10843] Host ctl01.mcp-ovs-dpdk-ha.local (192.168.10.36) already present
2019-05-09 13:55:17,791 [salt.state       :1951][INFO    ][10843] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 13:55:17.791537 duration_in_ms=1.105
2019-05-09 13:55:17,792 [salt.state       :1780][INFO    ][10843] Running state [ctl] at time 13:55:17.792010
2019-05-09 13:55:17,792 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl]
2019-05-09 13:55:17,792 [salt.state       :300 ][INFO    ][10843] Host ctl (192.168.10.35) already present
2019-05-09 13:55:17,793 [salt.state       :1951][INFO    ][10843] Completed state [ctl] at time 13:55:17.793071 duration_in_ms=1.061
2019-05-09 13:55:17,793 [salt.state       :1780][INFO    ][10843] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 13:55:17.793551
2019-05-09 13:55:17,793 [salt.state       :1813][INFO    ][10843] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2019-05-09 13:55:17,794 [salt.state       :300 ][INFO    ][10843] Host ctl.mcp-ovs-dpdk-ha.local (192.168.10.35) already present
2019-05-09 13:55:17,794 [salt.state       :1951][INFO    ][10843] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 13:55:17.794666 duration_in_ms=1.114
2019-05-09 13:55:17,795 [salt.state       :1780][INFO    ][10843] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:55:17.794961
2019-05-09 13:55:17,795 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2019-05-09 13:55:17,795 [salt.state       :300 ][INFO    ][10843] File /etc/network/interfaces.d/50-cloud-init.cfg is not present
2019-05-09 13:55:17,795 [salt.state       :1951][INFO    ][10843] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 13:55:17.795823 duration_in_ms=0.862
2019-05-09 13:55:17,796 [salt.state       :1780][INFO    ][10843] Running state [ens3] at time 13:55:17.796113
2019-05-09 13:55:17,796 [salt.state       :1813][INFO    ][10843] Executing state network.managed for [ens3]
2019-05-09 13:55:17,974 [salt.state       :300 ][INFO    ][10843] Interface ens3 is up to date.
2019-05-09 13:55:17,975 [salt.state       :1951][INFO    ][10843] Completed state [ens3] at time 13:55:17.975156 duration_in_ms=179.043
2019-05-09 13:55:17,975 [salt.state       :1780][INFO    ][10843] Running state [ens2] at time 13:55:17.975540
2019-05-09 13:55:17,975 [salt.state       :1813][INFO    ][10843] Executing state network.managed for [ens2]
2019-05-09 13:55:18,018 [salt.state       :300 ][INFO    ][10843] Interface ens2 is up to date.
2019-05-09 13:55:18,018 [salt.state       :1951][INFO    ][10843] Completed state [ens2] at time 13:55:18.018566 duration_in_ms=43.025
2019-05-09 13:55:18,019 [salt.state       :1780][INFO    ][10843] Running state [linux_system_network] at time 13:55:18.019031
2019-05-09 13:55:18,019 [salt.state       :1813][INFO    ][10843] Executing state network.system for [linux_system_network]
2019-05-09 13:55:18,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2019-05-09 13:55:18,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2019-05-09 13:55:18,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2019-05-09 13:55:18,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2019-05-09 13:55:18,886 [salt.loaded.int.module.debian_ip:1964][WARNING ][10843] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-05-09 13:55:18,887 [salt.state       :300 ][INFO    ][10843] {'network_settings': u'--- \n+++ \n@@ -1,3 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=ctl02\n\n DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2019-05-09 13:55:18,887 [salt.state       :1951][INFO    ][10843] Completed state [linux_system_network] at time 13:55:18.887337 duration_in_ms=868.305
2019-05-09 13:55:18,887 [salt.state       :1780][INFO    ][10843] Running state [/etc/udev/rules.d/60-net-txqueue.rules] at time 13:55:18.887657
2019-05-09 13:55:18,888 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/udev/rules.d/60-net-txqueue.rules]
2019-05-09 13:55:18,919 [salt.state       :300 ][INFO    ][10843] File /etc/udev/rules.d/60-net-txqueue.rules is in the correct state
2019-05-09 13:55:18,919 [salt.state       :1951][INFO    ][10843] Completed state [/etc/udev/rules.d/60-net-txqueue.rules] at time 13:55:18.919590 duration_in_ms=31.933
2019-05-09 13:55:18,923 [salt.state       :1780][INFO    ][10843] Running state [/etc/profile.d/proxy.sh] at time 13:55:18.923715
2019-05-09 13:55:18,924 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/profile.d/proxy.sh]
2019-05-09 13:55:18,924 [salt.state       :300 ][INFO    ][10843] File /etc/profile.d/proxy.sh is not present
2019-05-09 13:55:18,925 [salt.state       :1951][INFO    ][10843] Completed state [/etc/profile.d/proxy.sh] at time 13:55:18.925262 duration_in_ms=1.547
2019-05-09 13:55:18,926 [salt.state       :1780][INFO    ][10843] Running state [/etc/apt/apt.conf.d/95proxies] at time 13:55:18.925985
2019-05-09 13:55:18,927 [salt.state       :1813][INFO    ][10843] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2019-05-09 13:55:18,928 [salt.state       :300 ][INFO    ][10843] File /etc/apt/apt.conf.d/95proxies is not present
2019-05-09 13:55:18,929 [salt.state       :1951][INFO    ][10843] Completed state [/etc/apt/apt.conf.d/95proxies] at time 13:55:18.929185 duration_in_ms=3.2
2019-05-09 13:55:18,929 [salt.state       :1780][INFO    ][10843] Running state [/dev/shm] at time 13:55:18.929827
2019-05-09 13:55:18,931 [salt.state       :1813][INFO    ][10843] Executing state mount.mounted for [/dev/shm]
2019-05-09 13:55:18,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'mount -l' in directory '/root'
2019-05-09 13:55:18,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'blkid' in directory '/root'
2019-05-09 13:55:19,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'mount -l' in directory '/root'
2019-05-09 13:55:19,048 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'umount /dev/shm' in directory '/root'
2019-05-09 13:55:19,076 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][10843] Command '['umount', '/dev/shm']' failed with return code: 32
2019-05-09 13:55:19,078 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][10843] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-05-09 13:55:19,079 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][10843] retcode: 32
2019-05-09 13:55:19,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'mount -l' in directory '/root'
2019-05-09 13:55:19,112 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command 'blkid' in directory '/root'
2019-05-09 13:55:19,141 [salt.state       :300 ][INFO    ][10843] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2019-05-09 13:55:19,142 [salt.state       :1951][INFO    ][10843] Completed state [/dev/shm] at time 13:55:19.142819 duration_in_ms=212.991
2019-05-09 13:55:19,144 [salt.state       :1780][INFO    ][10843] Running state [ntp] at time 13:55:19.143881
2019-05-09 13:55:19,144 [salt.state       :1813][INFO    ][10843] Executing state pkg.installed for [ntp]
2019-05-09 13:55:19,172 [salt.state       :300 ][INFO    ][10843] All specified packages are already installed
2019-05-09 13:55:19,173 [salt.state       :1951][INFO    ][10843] Completed state [ntp] at time 13:55:19.172890 duration_in_ms=29.008
2019-05-09 13:55:19,179 [salt.state       :1780][INFO    ][10843] Running state [/etc/ntp.conf] at time 13:55:19.179707
2019-05-09 13:55:19,180 [salt.state       :1813][INFO    ][10843] Executing state file.managed for [/etc/ntp.conf]
2019-05-09 13:55:19,333 [salt.state       :300 ][INFO    ][10843] File /etc/ntp.conf is in the correct state
2019-05-09 13:55:19,333 [salt.state       :1951][INFO    ][10843] Completed state [/etc/ntp.conf] at time 13:55:19.333779 duration_in_ms=154.073
2019-05-09 13:55:19,335 [salt.state       :1780][INFO    ][10843] Running state [ntp] at time 13:55:19.335420
2019-05-09 13:55:19,335 [salt.state       :1813][INFO    ][10843] Executing state service.running for [ntp]
2019-05-09 13:55:19,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2019-05-09 13:55:19,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-05-09 13:55:19,372 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10843] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2019-05-09 13:55:19,394 [salt.state       :300 ][INFO    ][10843] The service ntp is already running
2019-05-09 13:55:19,394 [salt.state       :1951][INFO    ][10843] Completed state [ntp] at time 13:55:19.394670 duration_in_ms=59.25
2019-05-09 13:55:19,401 [salt.minion      :1711][INFO    ][10843] Returning information for job: 20190509135455810861
2019-05-09 13:56:00,695 [salt.minion      :1308][INFO    ][6133] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20190509135600685496
2019-05-09 13:56:00,720 [salt.minion      :1432][INFO    ][12048] Starting a new job with PID 12048
2019-05-09 13:56:00,761 [salt.minion      :1711][INFO    ][12048] Returning information for job: 20190509135600685496
2019-05-09 13:56:01,398 [salt.minion      :1308][INFO    ][6133] User sudo_ubuntu Executing command cmd.run with jid 20190509135601385728
2019-05-09 13:56:01,423 [salt.minion      :1432][INFO    ][12053] Starting a new job with PID 12053
2019-05-09 13:56:01,444 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][12053] Executing command 'reboot' in directory '/root'
2019-05-09 13:56:01,680 [salt.utils.parsers:1051][WARNING ][6133] Minion received a SIGTERM. Exiting.
2019-05-09 13:56:01,681 [salt.cli.daemons :82  ][INFO    ][6133] Shutting down the Salt Minion
2019-05-09 13:56:02,516 [salt.minion      :1711][INFO    ][12053] Returning information for job: 20190509135601385728
2019-05-09 13:56:32,941 [salt.cli.daemons :293 ][INFO    ][1658] Setting up the Salt Minion "ctl02.mcp-ovs-dpdk-ha.local"
2019-05-09 13:56:33,524 [salt.cli.daemons :82  ][INFO    ][1658] Starting up the Salt Minion
2019-05-09 13:56:33,525 [salt.utils.event :1017][INFO    ][1658] Starting pull socket on /var/run/salt/minion/minion_event_3a65c28a93_pull.ipc
2019-05-09 13:56:34,558 [salt.minion      :976 ][INFO    ][1658] Creating minion process manager
2019-05-09 13:56:35,934 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1658] Executing command ['date', '+%z'] in directory '/root'
2019-05-09 13:56:35,967 [salt.utils.schedule:568 ][INFO    ][1658] Updating job settings for scheduled job: __mine_interval
2019-05-09 13:56:35,969 [salt.minion      :1108][INFO    ][1658] Added mine.update to scheduler
2019-05-09 13:56:35,974 [salt.minion      :1975][INFO    ][1658] Minion is starting as user 'root'
2019-05-09 13:56:35,989 [salt.minion      :2336][INFO    ][1658] Minion is ready to receive requests!
2019-05-09 13:56:47,180 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command test.ping with jid 20190509135647172349
2019-05-09 13:56:47,209 [salt.minion      :1432][INFO    ][1793] Starting a new job with PID 1793
2019-05-09 13:56:47,343 [salt.minion      :1711][INFO    ][1793] Returning information for job: 20190509135647172349
2019-05-09 13:56:47,957 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command pkg.upgrade with jid 20190509135647945592
2019-05-09 13:56:47,979 [salt.minion      :1432][INFO    ][1798] Starting a new job with PID 1798
2019-05-09 13:56:48,100 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1798] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:56:49,308 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1798] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2019-05-09 13:57:03,051 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509135703038547
2019-05-09 13:57:03,078 [salt.minion      :1432][INFO    ][1929] Starting a new job with PID 1929
2019-05-09 13:57:03,470 [salt.minion      :1711][INFO    ][1929] Returning information for job: 20190509135703038547
2019-05-09 13:57:33,268 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509135733257299
2019-05-09 13:57:33,292 [salt.minion      :1432][INFO    ][3467] Starting a new job with PID 3467
2019-05-09 13:57:33,323 [salt.minion      :1711][INFO    ][3467] Returning information for job: 20190509135733257299
2019-05-09 13:57:52,037 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1798] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 13:57:52,094 [salt.minion      :1711][INFO    ][1798] Returning information for job: 20190509135647945592
2019-05-09 13:58:01,594 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command test.ping with jid 20190509135801588182
2019-05-09 13:58:01,617 [salt.minion      :1432][INFO    ][3955] Starting a new job with PID 3955
2019-05-09 13:58:01,662 [salt.minion      :1711][INFO    ][3955] Returning information for job: 20190509135801588182
2019-05-09 14:00:22,598 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509140022589149
2019-05-09 14:00:22,622 [salt.minion      :1432][INFO    ][3968] Starting a new job with PID 3968
2019-05-09 14:00:29,163 [salt.state       :915 ][INFO    ][3968] Loading fresh modules for state activity
2019-05-09 14:00:29,289 [salt.fileclient  :1219][INFO    ][3968] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2019-05-09 14:00:29,349 [salt.fileclient  :1219][INFO    ][3968] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2019-05-09 14:00:31,340 [salt.state       :1780][INFO    ][3968] Running state [keepalived] at time 14:00:31.340806
2019-05-09 14:00:31,341 [salt.state       :1813][INFO    ][3968] Executing state pkg.installed for [keepalived]
2019-05-09 14:00:31,342 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:00:31,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2019-05-09 14:00:31,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:00:34,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:00:34,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2019-05-09 14:00:37,725 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509140037713523
2019-05-09 14:00:37,750 [salt.minion      :1432][INFO    ][5022] Starting a new job with PID 5022
2019-05-09 14:00:37,785 [salt.minion      :1711][INFO    ][5022] Returning information for job: 20190509140037713523
2019-05-09 14:00:41,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:00:41,682 [salt.state       :300 ][INFO    ][3968] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.2.24-1ubuntu0.16.04.1'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2019-05-09 14:00:41,718 [salt.state       :915 ][INFO    ][3968] Loading fresh modules for state activity
2019-05-09 14:00:41,773 [salt.state       :1951][INFO    ][3968] Completed state [keepalived] at time 14:00:41.773897 duration_in_ms=10433.091
2019-05-09 14:00:41,781 [salt.state       :1780][INFO    ][3968] Running state [lsof] at time 14:00:41.781473
2019-05-09 14:00:41,781 [salt.state       :1813][INFO    ][3968] Executing state pkg.installed for [lsof]
2019-05-09 14:00:42,757 [salt.state       :300 ][INFO    ][3968] All specified packages are already installed
2019-05-09 14:00:42,758 [salt.state       :1951][INFO    ][3968] Completed state [lsof] at time 14:00:42.758530 duration_in_ms=977.051
2019-05-09 14:00:42,767 [salt.state       :1780][INFO    ][3968] Running state [/etc/keepalived/keepalived.conf] at time 14:00:42.767739
2019-05-09 14:00:42,768 [salt.state       :1813][INFO    ][3968] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2019-05-09 14:00:42,821 [salt.fileclient  :1219][INFO    ][3968] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2019-05-09 14:00:42,934 [salt.state       :300 ][INFO    ][3968] File changed:
New file
2019-05-09 14:00:42,935 [salt.state       :1951][INFO    ][3968] Completed state [/etc/keepalived/keepalived.conf] at time 14:00:42.935388 duration_in_ms=167.648
2019-05-09 14:00:42,938 [salt.state       :1780][INFO    ][3968] Running state [keepalived] at time 14:00:42.938361
2019-05-09 14:00:42,939 [salt.state       :1813][INFO    ][3968] Executing state service.running for [keepalived]
2019-05-09 14:00:42,940 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2019-05-09 14:00:42,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-05-09 14:00:42,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-05-09 14:00:43,003 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2019-05-09 14:00:43,124 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-05-09 14:00:43,151 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-05-09 14:00:43,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3968] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-05-09 14:00:43,205 [salt.state       :300 ][INFO    ][3968] {'keepalived': True}
2019-05-09 14:00:43,205 [salt.state       :1951][INFO    ][3968] Completed state [keepalived] at time 14:00:43.205588 duration_in_ms=267.229
2019-05-09 14:00:43,208 [salt.minion      :1711][INFO    ][3968] Returning information for job: 20190509140022589149
2019-05-09 14:03:02,467 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command pillar.get with jid 20190509140302463367
2019-05-09 14:03:02,491 [salt.minion      :1432][INFO    ][5376] Starting a new job with PID 5376
2019-05-09 14:03:02,503 [salt.minion      :1711][INFO    ][5376] Returning information for job: 20190509140302463367
2019-05-09 14:10:31,094 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509141031089538
2019-05-09 14:10:31,117 [salt.minion      :1432][INFO    ][5381] Starting a new job with PID 5381
2019-05-09 14:10:37,726 [salt.state       :915 ][INFO    ][5381] Loading fresh modules for state activity
2019-05-09 14:10:37,977 [salt.fileclient  :1219][INFO    ][5381] Fetching file from saltenv 'base', ** done ** 'glusterfs/client.sls'
2019-05-09 14:10:38,065 [salt.fileclient  :1219][INFO    ][5381] Fetching file from saltenv 'base', ** done ** 'glusterfs/map.jinja'
2019-05-09 14:10:38,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:10:38,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command 'systemd-escape -p --suffix=mount /var/lib/glance/images' in directory '/root'
2019-05-09 14:10:38,640 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command 'systemd-escape -p --suffix=mount /var/lib/keystone/fernet-keys' in directory '/root'
2019-05-09 14:10:38,656 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command 'systemd-escape -p --suffix=mount /var/lib/keystone/credential-keys' in directory '/root'
2019-05-09 14:10:39,556 [salt.state       :1780][INFO    ][5381] Running state [glusterfs-client] at time 14:10:39.556898
2019-05-09 14:10:39,557 [salt.state       :1813][INFO    ][5381] Executing state pkg.installed for [glusterfs-client]
2019-05-09 14:10:39,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['apt-cache', '-q', 'policy', 'glusterfs-client'] in directory '/root'
2019-05-09 14:10:39,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:10:42,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:10:42,186 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'glusterfs-client'] in directory '/root'
2019-05-09 14:10:46,179 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509141046168505
2019-05-09 14:10:46,201 [salt.minion      :1432][INFO    ][6404] Starting a new job with PID 6404
2019-05-09 14:10:46,213 [salt.minion      :1711][INFO    ][6404] Returning information for job: 20190509141046168505
2019-05-09 14:10:46,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:10:46,649 [salt.state       :300 ][INFO    ][5381] Made the following changes:
'glusterfs-client' changed from 'absent' to '3.13.2-ubuntu1~xenial2'
'libaio1' changed from 'absent' to '0.3.110-2'
'attr' changed from 'absent' to '1:2.4.47-2'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'
'glusterfs-common' changed from 'absent' to '3.13.2-ubuntu1~xenial2'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'liburcu4' changed from 'absent' to '0.9.1-3'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'

2019-05-09 14:10:46,709 [salt.state       :915 ][INFO    ][5381] Loading fresh modules for state activity
2019-05-09 14:10:46,807 [salt.state       :1951][INFO    ][5381] Completed state [glusterfs-client] at time 14:10:46.806898 duration_in_ms=7249.999
2019-05-09 14:10:46,820 [salt.state       :1780][INFO    ][5381] Running state [attr] at time 14:10:46.820285
2019-05-09 14:10:46,821 [salt.state       :1813][INFO    ][5381] Executing state pkg.installed for [attr]
2019-05-09 14:10:47,408 [salt.state       :300 ][INFO    ][5381] All specified packages are already installed
2019-05-09 14:10:47,408 [salt.state       :1951][INFO    ][5381] Completed state [attr] at time 14:10:47.408914 duration_in_ms=588.628
2019-05-09 14:10:47,411 [salt.state       :1780][INFO    ][5381] Running state [/etc/systemd/system/var-lib-glance-images.mount] at time 14:10:47.411330
2019-05-09 14:10:47,411 [salt.state       :1813][INFO    ][5381] Executing state file.managed for [/etc/systemd/system/var-lib-glance-images.mount]
2019-05-09 14:10:47,438 [salt.fileclient  :1219][INFO    ][5381] Fetching file from saltenv 'base', ** done ** 'glusterfs/files/glusterfs-client.mount'
2019-05-09 14:10:47,450 [salt.state       :300 ][INFO    ][5381] File changed:
New file
2019-05-09 14:10:47,450 [salt.state       :1951][INFO    ][5381] Completed state [/etc/systemd/system/var-lib-glance-images.mount] at time 14:10:47.450785 duration_in_ms=39.455
2019-05-09 14:10:47,451 [salt.state       :1780][INFO    ][5381] Running state [var-lib-glance-images.mount] at time 14:10:47.451862
2019-05-09 14:10:47,452 [salt.state       :1813][INFO    ][5381] Executing state service.running for [var-lib-glance-images.mount]
2019-05-09 14:10:47,452 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'status', 'var-lib-glance-images.mount', '-n', '0'] in directory '/root'
2019-05-09 14:10:47,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-active', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,571 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-active', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,612 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,644 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,830 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-glance-images.mount'] in directory '/root'
2019-05-09 14:10:47,858 [salt.state       :300 ][INFO    ][5381] {'var-lib-glance-images.mount': True}
2019-05-09 14:10:47,859 [salt.state       :1951][INFO    ][5381] Completed state [var-lib-glance-images.mount] at time 14:10:47.859658 duration_in_ms=407.794
2019-05-09 14:10:47,862 [salt.state       :1780][INFO    ][5381] Running state [/var/lib/glance/images] at time 14:10:47.862213
2019-05-09 14:10:47,863 [salt.state       :1813][INFO    ][5381] Executing state file.directory for [/var/lib/glance/images]
2019-05-09 14:10:47,869 [salt.state       :300 ][INFO    ][5381] {'group': 'glance', 'user': 'glance'}
2019-05-09 14:10:47,870 [salt.state       :1951][INFO    ][5381] Completed state [/var/lib/glance/images] at time 14:10:47.870378 duration_in_ms=8.166
2019-05-09 14:10:47,871 [salt.state       :1780][INFO    ][5381] Running state [/etc/systemd/system/var-lib-keystone-fernet\x2dkeys.mount] at time 14:10:47.871468
2019-05-09 14:10:47,872 [salt.state       :1813][INFO    ][5381] Executing state file.managed for [/etc/systemd/system/var-lib-keystone-fernet\x2dkeys.mount]
2019-05-09 14:10:47,931 [salt.state       :300 ][INFO    ][5381] File changed:
New file
2019-05-09 14:10:47,932 [salt.state       :1951][INFO    ][5381] Completed state [/etc/systemd/system/var-lib-keystone-fernet\x2dkeys.mount] at time 14:10:47.932695 duration_in_ms=61.225
2019-05-09 14:10:47,934 [salt.state       :1780][INFO    ][5381] Running state [var-lib-keystone-fernet\x2dkeys.mount] at time 14:10:47.934475
2019-05-09 14:10:47,935 [salt.state       :1813][INFO    ][5381] Executing state service.running for [var-lib-keystone-fernet\x2dkeys.mount]
2019-05-09 14:10:47,936 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'status', 'var-lib-keystone-fernet\\x2dkeys.mount', '-n', '0'] in directory '/root'
2019-05-09 14:10:47,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-active', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:47,998 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,035 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,213 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-active', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,282 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,329 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,543 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-fernet\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,570 [salt.state       :300 ][INFO    ][5381] {'var-lib-keystone-fernet\\x2dkeys.mount': True}
2019-05-09 14:10:48,571 [salt.state       :1951][INFO    ][5381] Completed state [var-lib-keystone-fernet\x2dkeys.mount] at time 14:10:48.571373 duration_in_ms=636.897
2019-05-09 14:10:48,573 [salt.state       :1780][INFO    ][5381] Running state [/var/lib/keystone/fernet-keys] at time 14:10:48.573632
2019-05-09 14:10:48,575 [salt.state       :1813][INFO    ][5381] Executing state file.directory for [/var/lib/keystone/fernet-keys]
2019-05-09 14:10:48,582 [salt.state       :300 ][INFO    ][5381] {'group': 'keystone', 'user': 'keystone', 'mode': '0750'}
2019-05-09 14:10:48,583 [salt.state       :1951][INFO    ][5381] Completed state [/var/lib/keystone/fernet-keys] at time 14:10:48.583264 duration_in_ms=9.631
2019-05-09 14:10:48,583 [salt.state       :1780][INFO    ][5381] Running state [/etc/systemd/system/var-lib-keystone-credential\x2dkeys.mount] at time 14:10:48.583870
2019-05-09 14:10:48,584 [salt.state       :1813][INFO    ][5381] Executing state file.managed for [/etc/systemd/system/var-lib-keystone-credential\x2dkeys.mount]
2019-05-09 14:10:48,639 [salt.state       :300 ][INFO    ][5381] File changed:
New file
2019-05-09 14:10:48,640 [salt.state       :1951][INFO    ][5381] Completed state [/etc/systemd/system/var-lib-keystone-credential\x2dkeys.mount] at time 14:10:48.640367 duration_in_ms=56.496
2019-05-09 14:10:48,642 [salt.state       :1780][INFO    ][5381] Running state [var-lib-keystone-credential\x2dkeys.mount] at time 14:10:48.641954
2019-05-09 14:10:48,642 [salt.state       :1813][INFO    ][5381] Executing state service.running for [var-lib-keystone-credential\x2dkeys.mount]
2019-05-09 14:10:48,644 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'status', 'var-lib-keystone-credential\\x2dkeys.mount', '-n', '0'] in directory '/root'
2019-05-09 14:10:48,676 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-active', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-active', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:48,990 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:49,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:49,224 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5381] Executing command ['systemctl', 'is-enabled', 'var-lib-keystone-credential\\x2dkeys.mount'] in directory '/root'
2019-05-09 14:10:49,251 [salt.state       :300 ][INFO    ][5381] {'var-lib-keystone-credential\\x2dkeys.mount': True}
2019-05-09 14:10:49,252 [salt.state       :1951][INFO    ][5381] Completed state [var-lib-keystone-credential\x2dkeys.mount] at time 14:10:49.252609 duration_in_ms=610.654
2019-05-09 14:10:49,255 [salt.state       :1780][INFO    ][5381] Running state [/var/lib/keystone/credential-keys] at time 14:10:49.254962
2019-05-09 14:10:49,255 [salt.state       :1813][INFO    ][5381] Executing state file.directory for [/var/lib/keystone/credential-keys]
2019-05-09 14:10:49,261 [salt.state       :300 ][INFO    ][5381] {'group': 'keystone', 'user': 'keystone'}
2019-05-09 14:10:49,261 [salt.state       :1951][INFO    ][5381] Completed state [/var/lib/keystone/credential-keys] at time 14:10:49.261750 duration_in_ms=6.789
2019-05-09 14:10:49,265 [salt.minion      :1711][INFO    ][5381] Returning information for job: 20190509141031089538
2019-05-09 14:15:56,382 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509141556377485
2019-05-09 14:15:56,407 [salt.minion      :1432][INFO    ][6970] Starting a new job with PID 6970
2019-05-09 14:16:04,148 [salt.state       :915 ][INFO    ][6970] Loading fresh modules for state activity
2019-05-09 14:16:04,239 [salt.fileclient  :1219][INFO    ][6970] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2019-05-09 14:16:04,298 [salt.fileclient  :1219][INFO    ][6970] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2019-05-09 14:16:04,339 [salt.fileclient  :1219][INFO    ][6970] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2019-05-09 14:16:05,433 [salt.state       :1780][INFO    ][6970] Running state [memcached] at time 14:16:05.433201
2019-05-09 14:16:05,433 [salt.state       :1813][INFO    ][6970] Executing state pkg.installed for [memcached]
2019-05-09 14:16:05,434 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:16:05,856 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2019-05-09 14:16:06,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:16:08,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:16:08,574 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2019-05-09 14:16:11,490 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509141611472403
2019-05-09 14:16:11,514 [salt.minion      :1432][INFO    ][7669] Starting a new job with PID 7669
2019-05-09 14:16:11,552 [salt.minion      :1711][INFO    ][7669] Returning information for job: 20190509141611472403
2019-05-09 14:16:13,403 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:16:13,436 [salt.state       :300 ][INFO    ][6970] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2019-05-09 14:16:13,460 [salt.state       :915 ][INFO    ][6970] Loading fresh modules for state activity
2019-05-09 14:16:13,557 [salt.state       :1951][INFO    ][6970] Completed state [memcached] at time 14:16:13.557611 duration_in_ms=8124.41
2019-05-09 14:16:13,562 [salt.state       :1780][INFO    ][6970] Running state [python-memcache] at time 14:16:13.562812
2019-05-09 14:16:13,563 [salt.state       :1813][INFO    ][6970] Executing state pkg.installed for [python-memcache]
2019-05-09 14:16:14,397 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:16:14,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2019-05-09 14:16:16,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:16:16,839 [salt.state       :300 ][INFO    ][6970] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2019-05-09 14:16:16,873 [salt.state       :915 ][INFO    ][6970] Loading fresh modules for state activity
2019-05-09 14:16:16,929 [salt.state       :1951][INFO    ][6970] Completed state [python-memcache] at time 14:16:16.928955 duration_in_ms=3366.141
2019-05-09 14:16:16,937 [salt.state       :1780][INFO    ][6970] Running state [/etc/memcached.conf] at time 14:16:16.937918
2019-05-09 14:16:16,938 [salt.state       :1813][INFO    ][6970] Executing state file.managed for [/etc/memcached.conf]
2019-05-09 14:16:16,981 [salt.fileclient  :1219][INFO    ][6970] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2019-05-09 14:16:17,041 [salt.state       :300 ][INFO    ][6970] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,11 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +29,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +44,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2019-05-09 14:16:17,044 [salt.state       :1951][INFO    ][6970] Completed state [/etc/memcached.conf] at time 14:16:17.044529 duration_in_ms=106.611
2019-05-09 14:16:17,664 [salt.state       :1780][INFO    ][6970] Running state [memcached] at time 14:16:17.664566
2019-05-09 14:16:17,664 [salt.state       :1813][INFO    ][6970] Executing state service.running for [memcached]
2019-05-09 14:16:17,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2019-05-09 14:16:17,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-05-09 14:16:17,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2019-05-09 14:16:17,722 [salt.state       :300 ][INFO    ][6970] The service memcached is already running
2019-05-09 14:16:17,722 [salt.state       :1951][INFO    ][6970] Completed state [memcached] at time 14:16:17.722443 duration_in_ms=57.877
2019-05-09 14:16:17,722 [salt.state       :1780][INFO    ][6970] Running state [memcached] at time 14:16:17.722717
2019-05-09 14:16:17,723 [salt.state       :1813][INFO    ][6970] Executing state service.mod_watch for [memcached]
2019-05-09 14:16:17,723 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-05-09 14:16:17,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6970] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2019-05-09 14:16:17,764 [salt.state       :300 ][INFO    ][6970] {'memcached': True}
2019-05-09 14:16:17,765 [salt.state       :1951][INFO    ][6970] Completed state [memcached] at time 14:16:17.765798 duration_in_ms=43.08
2019-05-09 14:16:17,770 [salt.minion      :1711][INFO    ][6970] Returning information for job: 20190509141556377485
2019-05-09 14:16:19,005 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509141618997659
2019-05-09 14:16:19,032 [salt.minion      :1432][INFO    ][8014] Starting a new job with PID 8014
2019-05-09 14:16:26,003 [salt.state       :915 ][INFO    ][8014] Loading fresh modules for state activity
2019-05-09 14:16:26,284 [salt.fileclient  :1219][INFO    ][8014] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2019-05-09 14:16:26,311 [salt.fileclient  :1219][INFO    ][8014] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2019-05-09 14:16:27,257 [salt.state       :1780][INFO    ][8014] Running state [haproxy] at time 14:16:27.257689
2019-05-09 14:16:27,258 [salt.state       :1813][INFO    ][8014] Executing state pkg.installed for [haproxy]
2019-05-09 14:16:27,258 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:16:27,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2019-05-09 14:16:28,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:16:29,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:16:29,682 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2019-05-09 14:16:34,041 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509141634027726
2019-05-09 14:16:34,052 [salt.minion      :1432][INFO    ][8871] Starting a new job with PID 8871
2019-05-09 14:16:34,066 [salt.minion      :1711][INFO    ][8871] Returning information for job: 20190509141634027726
2019-05-09 14:16:34,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:16:34,626 [salt.state       :300 ][INFO    ][8014] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.2'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2.1'

2019-05-09 14:16:34,652 [salt.state       :915 ][INFO    ][8014] Loading fresh modules for state activity
2019-05-09 14:16:34,689 [salt.state       :1951][INFO    ][8014] Completed state [haproxy] at time 14:16:34.689611 duration_in_ms=7431.923
2019-05-09 14:16:34,694 [salt.state       :1780][INFO    ][8014] Running state [/etc/default/haproxy] at time 14:16:34.694107
2019-05-09 14:16:34,694 [salt.state       :1813][INFO    ][8014] Executing state file.managed for [/etc/default/haproxy]
2019-05-09 14:16:34,723 [salt.fileclient  :1219][INFO    ][8014] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2019-05-09 14:16:34,726 [salt.state       :300 ][INFO    ][8014] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2019-05-09 14:16:34,727 [salt.state       :1951][INFO    ][8014] Completed state [/etc/default/haproxy] at time 14:16:34.727495 duration_in_ms=33.387
2019-05-09 14:16:34,727 [salt.state       :1780][INFO    ][8014] Running state [/etc/haproxy/haproxy.cfg] at time 14:16:34.727827
2019-05-09 14:16:34,728 [salt.state       :1813][INFO    ][8014] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2019-05-09 14:16:34,753 [salt.fileclient  :1219][INFO    ][8014] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2019-05-09 14:16:34,913 [salt.state       :300 ][INFO    ][8014] File changed:
--- 
+++ 
@@ -1,35 +1,200 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen keystone_public_api
+  bind 192.168.10.35:5000 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:5000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:5000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:5000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen nova_api
+  bind 192.168.10.35:8774 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8774 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8774 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8774 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen placement_api
+  bind 192.168.10.35:8778 
+  
+  mode http
+  balance roundrobin
+  option httpclose
+  option httplog
+  option httpchk GET /
+  http-check expect rstatus (401|200)
+  server ctl01 192.168.10.36:8778 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8778 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8778 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen keystone_admin_api
+  bind 192.168.10.35:35357 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:35357 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:35357 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:35357 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen cinder_api
+  bind 192.168.10.35:8776 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8776 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8776 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8776 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen glance_registry_api
+  bind 192.168.10.35:9191 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 192.168.10.36:9191 check
+  server ctl02 192.168.10.37:9191 check
+  server ctl03 192.168.10.38:9191 check
+
+listen heat_cfn_api
+  bind 192.168.10.35:8000 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8000 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen nova_novnc
+  bind 192.168.10.35:6080 
+  mode http
+  balance roundrobin
+  option  httplog
+  server ctl01 192.168.10.36:6080 check
+  server ctl02 192.168.10.37:6080 check
+  server ctl03 192.168.10.38:6080 check
+
+listen designate_api
+  bind 192.168.10.35:9001 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9001 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9001 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen glance_api
+  bind 192.168.10.35:9292 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9292 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9292 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9292 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen heat_api
+  bind 192.168.10.35:8004 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8004 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8004 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8004 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen barbican-api
+  bind 192.168.10.35:9311 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9311 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9311 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9311 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen nova_metadata_api
+  bind 192.168.10.35:8775 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:8775 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:8775 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:8775 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen barbican-admin-api
+  bind 192.168.10.35:9312 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9312 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9312 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9312 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+
+listen neutron_api
+  bind 192.168.10.35:9696 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server ctl01 192.168.10.36:9696 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl02 192.168.10.37:9696 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server ctl03 192.168.10.38:9696 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2019-05-09 14:16:34,913 [salt.state       :1951][INFO    ][8014] Completed state [/etc/haproxy/haproxy.cfg] at time 14:16:34.913653 duration_in_ms=185.825
2019-05-09 14:16:34,914 [salt.state       :1780][INFO    ][8014] Running state [/etc/haproxy/ssl] at time 14:16:34.913969
2019-05-09 14:16:34,914 [salt.state       :1813][INFO    ][8014] Executing state file.directory for [/etc/haproxy/ssl]
2019-05-09 14:16:34,915 [salt.state       :300 ][INFO    ][8014] {'/etc/haproxy/ssl': 'New Dir'}
2019-05-09 14:16:34,915 [salt.state       :1951][INFO    ][8014] Completed state [/etc/haproxy/ssl] at time 14:16:34.915867 duration_in_ms=1.897
2019-05-09 14:16:34,916 [salt.state       :1780][INFO    ][8014] Running state [/etc/haproxy/errors/429.http11] at time 14:16:34.916167
2019-05-09 14:16:34,916 [salt.state       :1813][INFO    ][8014] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2019-05-09 14:16:34,937 [salt.fileclient  :1219][INFO    ][8014] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2019-05-09 14:16:34,944 [salt.state       :300 ][INFO    ][8014] File changed:
New file
2019-05-09 14:16:34,944 [salt.state       :1951][INFO    ][8014] Completed state [/etc/haproxy/errors/429.http11] at time 14:16:34.944942 duration_in_ms=28.775
2019-05-09 14:16:34,945 [salt.state       :1780][INFO    ][8014] Running state [haproxy_status_packages] at time 14:16:34.945820
2019-05-09 14:16:34,946 [salt.state       :1813][INFO    ][8014] Executing state pkg.installed for [haproxy_status_packages]
2019-05-09 14:16:35,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:16:35,606 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2019-05-09 14:16:38,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:16:38,203 [salt.state       :300 ][INFO    ][8014] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2019-05-09 14:16:38,218 [salt.state       :915 ][INFO    ][8014] Loading fresh modules for state activity
2019-05-09 14:16:38,251 [salt.state       :1951][INFO    ][8014] Completed state [haproxy_status_packages] at time 14:16:38.251439 duration_in_ms=3305.618
2019-05-09 14:16:38,255 [salt.state       :1780][INFO    ][8014] Running state [/usr/bin/haproxy-status.sh] at time 14:16:38.255672
2019-05-09 14:16:38,256 [salt.state       :1813][INFO    ][8014] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2019-05-09 14:16:38,282 [salt.fileclient  :1219][INFO    ][8014] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2019-05-09 14:16:38,310 [salt.state       :300 ][INFO    ][8014] File changed:
New file
2019-05-09 14:16:38,310 [salt.state       :1951][INFO    ][8014] Completed state [/usr/bin/haproxy-status.sh] at time 14:16:38.310825 duration_in_ms=55.153
2019-05-09 14:16:38,313 [salt.state       :1780][INFO    ][8014] Running state [net.ipv4.ip_nonlocal_bind] at time 14:16:38.313361
2019-05-09 14:16:38,313 [salt.state       :1813][INFO    ][8014] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2019-05-09 14:16:38,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2019-05-09 14:16:38,328 [salt.state       :300 ][INFO    ][8014] {'net.ipv4.ip_nonlocal_bind': 1}
2019-05-09 14:16:38,329 [salt.state       :1951][INFO    ][8014] Completed state [net.ipv4.ip_nonlocal_bind] at time 14:16:38.329427 duration_in_ms=16.067
2019-05-09 14:16:38,827 [salt.state       :1780][INFO    ][8014] Running state [haproxy] at time 14:16:38.827935
2019-05-09 14:16:38,828 [salt.state       :1813][INFO    ][8014] Executing state service.running for [haproxy]
2019-05-09 14:16:38,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-05-09 14:16:38,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-05-09 14:16:38,865 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-05-09 14:16:38,884 [salt.state       :300 ][INFO    ][8014] The service haproxy is already running
2019-05-09 14:16:38,884 [salt.state       :1951][INFO    ][8014] Completed state [haproxy] at time 14:16:38.884700 duration_in_ms=56.766
2019-05-09 14:16:38,885 [salt.state       :1780][INFO    ][8014] Running state [haproxy] at time 14:16:38.885011
2019-05-09 14:16:38,885 [salt.state       :1813][INFO    ][8014] Executing state service.mod_watch for [haproxy]
2019-05-09 14:16:38,886 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-05-09 14:16:38,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8014] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2019-05-09 14:16:38,940 [salt.state       :300 ][INFO    ][8014] {'haproxy': True}
2019-05-09 14:16:38,941 [salt.state       :1951][INFO    ][8014] Completed state [haproxy] at time 14:16:38.941033 duration_in_ms=56.023
2019-05-09 14:16:38,942 [salt.minion      :1711][INFO    ][8014] Returning information for job: 20190509141618997659
2019-05-09 14:16:41,607 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command service.status with jid 20190509141641602006
2019-05-09 14:16:41,634 [salt.minion      :1432][INFO    ][9261] Starting a new job with PID 9261
2019-05-09 14:16:42,415 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][9261] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-05-09 14:16:42,442 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][9261] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-05-09 14:16:42,465 [salt.minion      :1711][INFO    ][9261] Returning information for job: 20190509141641602006
2019-05-09 14:16:43,352 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command service.restart with jid 20190509141643346492
2019-05-09 14:16:43,382 [salt.minion      :1432][INFO    ][9271] Starting a new job with PID 9271
2019-05-09 14:16:44,172 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][9271] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2019-05-09 14:16:44,214 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][9271] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2019-05-09 14:16:44,251 [salt.minion      :1711][INFO    ][9271] Returning information for job: 20190509141643346492
2019-05-09 14:18:23,539 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509141823529625
2019-05-09 14:18:23,564 [salt.minion      :1432][INFO    ][9321] Starting a new job with PID 9321
2019-05-09 14:18:30,164 [salt.state       :915 ][INFO    ][9321] Loading fresh modules for state activity
2019-05-09 14:18:30,270 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/server.sls'
2019-05-09 14:18:30,494 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2019-05-09 14:18:30,524 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2019-05-09 14:18:30,552 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2019-05-09 14:18:30,642 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2019-05-09 14:18:30,749 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2019-05-09 14:18:30,877 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2019-05-09 14:18:31,090 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2019-05-09 14:18:31,202 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2019-05-09 14:18:31,313 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/db/offline_sync.sls'
2019-05-09 14:18:31,431 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/_ssl/mysql.sls'
2019-05-09 14:18:31,574 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/_ssl/rabbitmq.sls'
2019-05-09 14:18:32,493 [salt.state       :1780][INFO    ][9321] Running state [keystone] at time 14:18:32.493904
2019-05-09 14:18:32,494 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [keystone]
2019-05-09 14:18:32,495 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:18:32,884 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['apt-cache', '-q', 'policy', 'keystone'] in directory '/root'
2019-05-09 14:18:33,028 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:18:35,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:18:35,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keystone'] in directory '/root'
2019-05-09 14:18:38,594 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509141838578772
2019-05-09 14:18:38,618 [salt.minion      :1432][INFO    ][9765] Starting a new job with PID 9765
2019-05-09 14:18:38,655 [salt.minion      :1711][INFO    ][9765] Returning information for job: 20190509141838578772
2019-05-09 14:19:08,713 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509141908699260
2019-05-09 14:19:08,738 [salt.minion      :1432][INFO    ][12005] Starting a new job with PID 12005
2019-05-09 14:19:08,775 [salt.minion      :1711][INFO    ][12005] Returning information for job: 20190509141908699260
2019-05-09 14:19:21,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:19:21,689 [salt.state       :300 ][INFO    ][9321] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'libapr1' changed from 'absent' to '1.5.2-3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp7'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-pycadf' changed from 'absent' to '2.7.0-1~u16.04+mcp5'
'xmlsec1' changed from 'absent' to '1.2.20-2ubuntu4'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-click' changed from 'absent' to '6.2-2ubuntu1'
'python-typing' changed from 'absent' to '3.6.2-1~u16.04+mcp2'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-ldap' changed from 'absent' to '3.0.0-1~u16.04+mcp1'
'python-sphinx' changed from 'absent' to '1.6.4-2~u16.04+mcp3'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'python-scrypt' changed from 'absent' to '0.8.0-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.10'
'python2.7-testscenarios' changed from 'absent' to '1'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'python-editor' changed from 'absent' to '0.4-2'
'pycadf-common' changed from 'absent' to '2.7.0-1~u16.04+mcp5'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.10'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-bcrypt' changed from 'absent' to '3.1.3-1~u16.04+mcp3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'keystone-common' changed from 'absent' to '2:14.1.0-1~u16.04+mcp22'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python-keystone' changed from 'absent' to '2:14.1.0-1~u16.04+mcp22'
'python-aniso8601' changed from 'absent' to '0.83-1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.10'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-pyldap' changed from 'absent' to '1'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python2.7-greenlet' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-itsdangerous' changed from 'absent' to '0.24+dfsg1-1'
'python-alabaster' changed from 'absent' to '0.7.7-1'
'python-flask-restful' changed from 'absent' to '0.3.5-1~u16.04+mcp0'
'python-oslo.db' changed from 'absent' to '4.40.1-1~u16.04+mcp5'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'python-oslo-db' changed from 'absent' to '1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-eventlet' changed from 'absent' to '0.20.0-5~u16.04+mcp0'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-ldap' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp2'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp7'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'python-repoze.who' changed from 'absent' to '2.2-3'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python2.7-testtools' changed from 'absent' to '1'
'python-osprofiler' changed from 'absent' to '2.3.0-1~u16.04+mcp'
'python-colorama' changed from 'absent' to '0.3.7-1'
'python-responses' changed from 'absent' to '0.3.0-1'
'httpd-wsgi' changed from 'absent' to '1'
'python-oslo.messaging' changed from 'absent' to '8.1.2-1~u16.04+mcp14'
'keystone' changed from 'absent' to '2:14.1.0-1~u16.04+mcp22'
'python2.7-alabaster' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp6'
'python-flask' changed from 'absent' to '1.0.2-1~u16.04+mcp'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.10'
'python-imagesize' changed from 'absent' to '0.7.1-1.1~u16.04+mcp2'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-passlib' changed from 'absent' to '1.7.1-2.1~u16.04+mcp2'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-oslo.service' changed from 'absent' to '1.31.7-1~u16.04+mcp4'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'sphinx-common' changed from 'absent' to '1.6.4-2~u16.04+mcp3'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python2.7-keystone' changed from 'absent' to '1'
'python-sqlalchemy' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp10'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'python-pysaml2' changed from 'absent' to '4.5.0-1~u16.04+mcp'
'python-zope' changed from 'absent' to '1'
'python-oslo.cache' changed from 'absent' to '1.30.3-1~u16.04+mcp9'
'httpd-cgi' changed from 'absent' to '1'
'ssl-cert' changed from 'absent' to '1.0.37'
'python-future' changed from 'absent' to '0.15.2-1'

2019-05-09 14:19:21,724 [salt.state       :915 ][INFO    ][9321] Loading fresh modules for state activity
2019-05-09 14:19:21,760 [salt.state       :1951][INFO    ][9321] Completed state [keystone] at time 14:19:21.759965 duration_in_ms=49266.061
2019-05-09 14:19:21,764 [salt.state       :1780][INFO    ][9321] Running state [python-keystone] at time 14:19:21.764936
2019-05-09 14:19:21,765 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-keystone]
2019-05-09 14:19:22,490 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:22,490 [salt.state       :1951][INFO    ][9321] Completed state [python-keystone] at time 14:19:22.490489 duration_in_ms=725.552
2019-05-09 14:19:22,490 [salt.state       :1780][INFO    ][9321] Running state [python-keystoneclient] at time 14:19:22.490769
2019-05-09 14:19:22,490 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-keystoneclient]
2019-05-09 14:19:22,508 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:22,508 [salt.state       :1951][INFO    ][9321] Completed state [python-keystoneclient] at time 14:19:22.508804 duration_in_ms=18.036
2019-05-09 14:19:22,509 [salt.state       :1780][INFO    ][9321] Running state [python-psycopg2] at time 14:19:22.509013
2019-05-09 14:19:22,509 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-psycopg2]
2019-05-09 14:19:22,532 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:19:22,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-psycopg2'] in directory '/root'
2019-05-09 14:19:26,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:19:26,659 [salt.state       :300 ][INFO    ][9321] Made the following changes:
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'libpq5' changed from 'absent' to '9.5.16-0ubuntu0.16.04.1'

2019-05-09 14:19:26,695 [salt.state       :915 ][INFO    ][9321] Loading fresh modules for state activity
2019-05-09 14:19:26,741 [salt.state       :1951][INFO    ][9321] Completed state [python-psycopg2] at time 14:19:26.741476 duration_in_ms=4232.462
2019-05-09 14:19:26,748 [salt.state       :1780][INFO    ][9321] Running state [python-mysqldb] at time 14:19:26.748169
2019-05-09 14:19:26,748 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-mysqldb]
2019-05-09 14:19:27,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:19:27,440 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-mysqldb'] in directory '/root'
2019-05-09 14:19:30,028 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:19:30,086 [salt.state       :300 ][INFO    ][9321] Made the following changes:
'python2.7-mysqldb' changed from 'absent' to '1'
'mysql-common' changed from 'absent' to '5.7.26-0ubuntu0.16.04.1'
'mysql-common-5.6' changed from 'absent' to '1'
'libmysqlclient20' changed from 'absent' to '5.7.26-0ubuntu0.16.04.1'
'python-mysqldb' changed from 'absent' to '1.3.7-1build2'

2019-05-09 14:19:30,118 [salt.state       :915 ][INFO    ][9321] Loading fresh modules for state activity
2019-05-09 14:19:30,244 [salt.state       :1951][INFO    ][9321] Completed state [python-mysqldb] at time 14:19:30.244604 duration_in_ms=3496.434
2019-05-09 14:19:30,249 [salt.state       :1780][INFO    ][9321] Running state [mysql-client] at time 14:19:30.249291
2019-05-09 14:19:30,249 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [mysql-client]
2019-05-09 14:19:31,221 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:19:31,276 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'mysql-client'] in directory '/root'
2019-05-09 14:19:35,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:19:35,357 [salt.state       :300 ][INFO    ][9321] Made the following changes:
'mysql-client-core-5.7' changed from 'absent' to '5.7.26-0ubuntu0.16.04.1'
'mysql-client' changed from 'absent' to '5.7.26-0ubuntu0.16.04.1'
'virtual-mysql-client' changed from 'absent' to '1'
'mysql-client-5.7' changed from 'absent' to '5.7.26-0ubuntu0.16.04.1'
'virtual-mysql-client-core' changed from 'absent' to '1'

2019-05-09 14:19:35,388 [salt.state       :915 ][INFO    ][9321] Loading fresh modules for state activity
2019-05-09 14:19:35,441 [salt.state       :1951][INFO    ][9321] Completed state [mysql-client] at time 14:19:35.441415 duration_in_ms=5192.124
2019-05-09 14:19:35,447 [salt.state       :1780][INFO    ][9321] Running state [python-six] at time 14:19:35.447896
2019-05-09 14:19:35,448 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-six]
2019-05-09 14:19:36,112 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,113 [salt.state       :1951][INFO    ][9321] Completed state [python-six] at time 14:19:36.113644 duration_in_ms=665.745
2019-05-09 14:19:36,114 [salt.state       :1780][INFO    ][9321] Running state [python-memcache] at time 14:19:36.114454
2019-05-09 14:19:36,115 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-memcache]
2019-05-09 14:19:36,138 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,139 [salt.state       :1951][INFO    ][9321] Completed state [python-memcache] at time 14:19:36.138925 duration_in_ms=24.472
2019-05-09 14:19:36,139 [salt.state       :1780][INFO    ][9321] Running state [python-openstackclient] at time 14:19:36.139497
2019-05-09 14:19:36,140 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-openstackclient]
2019-05-09 14:19:36,161 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,162 [salt.state       :1951][INFO    ][9321] Completed state [python-openstackclient] at time 14:19:36.162179 duration_in_ms=22.682
2019-05-09 14:19:36,162 [salt.state       :1780][INFO    ][9321] Running state [gettext-base] at time 14:19:36.162746
2019-05-09 14:19:36,163 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [gettext-base]
2019-05-09 14:19:36,187 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,188 [salt.state       :1951][INFO    ][9321] Completed state [gettext-base] at time 14:19:36.188115 duration_in_ms=25.368
2019-05-09 14:19:36,188 [salt.state       :1780][INFO    ][9321] Running state [python-pycadf] at time 14:19:36.188711
2019-05-09 14:19:36,188 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [python-pycadf]
2019-05-09 14:19:36,211 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,211 [salt.state       :1951][INFO    ][9321] Completed state [python-pycadf] at time 14:19:36.211666 duration_in_ms=22.954
2019-05-09 14:19:36,213 [salt.state       :1780][INFO    ][9321] Running state [apache2] at time 14:19:36.213494
2019-05-09 14:19:36,214 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [apache2]
2019-05-09 14:19:36,235 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,236 [salt.state       :1951][INFO    ][9321] Completed state [apache2] at time 14:19:36.236203 duration_in_ms=22.709
2019-05-09 14:19:36,237 [salt.state       :1780][INFO    ][9321] Running state [openssl] at time 14:19:36.237486
2019-05-09 14:19:36,238 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [openssl]
2019-05-09 14:19:36,259 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,260 [salt.state       :1951][INFO    ][9321] Completed state [openssl] at time 14:19:36.260436 duration_in_ms=22.95
2019-05-09 14:19:36,263 [salt.state       :1780][INFO    ][9321] Running state [a2enmod ssl] at time 14:19:36.263282
2019-05-09 14:19:36,263 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [a2enmod ssl]
2019-05-09 14:19:36,265 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command 'a2enmod ssl' in directory '/root'
2019-05-09 14:19:36,399 [salt.state       :300 ][INFO    ][9321] {'pid': 13284, 'retcode': 0, 'stderr': '', 'stdout': 'Considering dependency setenvif for ssl:\nModule setenvif already enabled\nConsidering dependency mime for ssl:\nModule mime already enabled\nConsidering dependency socache_shmcb for ssl:\nEnabling module socache_shmcb.\nEnabling module ssl.\nSee /usr/share/doc/apache2/README.Debian.gz on how to configure SSL and create self-signed certificates.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-05-09 14:19:36,400 [salt.state       :1951][INFO    ][9321] Completed state [a2enmod ssl] at time 14:19:36.400178 duration_in_ms=136.897
2019-05-09 14:19:36,402 [salt.state       :1780][INFO    ][9321] Running state [a2enmod rewrite] at time 14:19:36.402749
2019-05-09 14:19:36,403 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [a2enmod rewrite]
2019-05-09 14:19:36,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command 'a2enmod rewrite' in directory '/root'
2019-05-09 14:19:36,525 [salt.state       :300 ][INFO    ][9321] {'pid': 13297, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-05-09 14:19:36,526 [salt.state       :1951][INFO    ][9321] Completed state [a2enmod rewrite] at time 14:19:36.526203 duration_in_ms=123.453
2019-05-09 14:19:36,528 [salt.state       :1780][INFO    ][9321] Running state [libapache2-mod-wsgi] at time 14:19:36.528715
2019-05-09 14:19:36,529 [salt.state       :1813][INFO    ][9321] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-05-09 14:19:36,554 [salt.state       :300 ][INFO    ][9321] All specified packages are already installed
2019-05-09 14:19:36,554 [salt.state       :1951][INFO    ][9321] Completed state [libapache2-mod-wsgi] at time 14:19:36.554770 duration_in_ms=26.055
2019-05-09 14:19:36,556 [salt.state       :1780][INFO    ][9321] Running state [a2enmod wsgi] at time 14:19:36.556213
2019-05-09 14:19:36,556 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [a2enmod wsgi]
2019-05-09 14:19:36,557 [salt.state       :300 ][INFO    ][9321] /etc/apache2/mods-enabled/wsgi.load exists
2019-05-09 14:19:36,558 [salt.state       :1951][INFO    ][9321] Completed state [a2enmod wsgi] at time 14:19:36.558311 duration_in_ms=2.098
2019-05-09 14:19:36,559 [salt.state       :1780][INFO    ][9321] Running state [a2enmod status -q] at time 14:19:36.559720
2019-05-09 14:19:36,560 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [a2enmod status -q]
2019-05-09 14:19:36,561 [salt.state       :300 ][INFO    ][9321] /etc/apache2/mods-enabled/status.load exists
2019-05-09 14:19:36,561 [salt.state       :1951][INFO    ][9321] Completed state [a2enmod status -q] at time 14:19:36.561663 duration_in_ms=1.943
2019-05-09 14:19:36,568 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:19:36.568704
2019-05-09 14:19:36,569 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-05-09 14:19:36,570 [salt.state       :300 ][INFO    ][9321] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-05-09 14:19:36,570 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:19:36.570748 duration_in_ms=2.044
2019-05-09 14:19:36,571 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:19:36.571297
2019-05-09 14:19:36,571 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-05-09 14:19:36,572 [salt.state       :300 ][INFO    ][9321] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-05-09 14:19:36,573 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:19:36.573169 duration_in_ms=1.872
2019-05-09 14:19:36,573 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:19:36.573720
2019-05-09 14:19:36,574 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-05-09 14:19:36,575 [salt.state       :300 ][INFO    ][9321] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-05-09 14:19:36,575 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:19:36.575503 duration_in_ms=1.783
2019-05-09 14:19:36,576 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:19:36.576044
2019-05-09 14:19:36,576 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-05-09 14:19:36,577 [salt.state       :300 ][INFO    ][9321] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-05-09 14:19:36,577 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:19:36.577798 duration_in_ms=1.754
2019-05-09 14:19:36,585 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 14:19:36.584999
2019-05-09 14:19:36,585 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-05-09 14:19:36,639 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_event.conf'
2019-05-09 14:19:36,763 [salt.state       :300 ][INFO    ][9321] File changed:
--- 
+++ 
@@ -5,14 +5,15 @@
 # ThreadsPerChild: constant number of worker threads in each server process
 # MaxRequestWorkers: maximum number of worker threads
 # MaxConnectionsPerChild: maximum number of requests a server process serves
+
 <IfModule mpm_event_module>
-	StartServers			 2
-	MinSpareThreads		 25
-	MaxSpareThreads		 75
-	ThreadLimit			 64
-	ThreadsPerChild		 25
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareThreads         25
+    MaxSpareThreads         75
+    ThreadLimit             64
+    ThreadsPerChild         25
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2019-05-09 14:19:36,765 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 14:19:36.765127 duration_in_ms=180.127
2019-05-09 14:19:36,768 [salt.state       :1780][INFO    ][9321] Running state [a2enmod mpm_event] at time 14:19:36.768345
2019-05-09 14:19:36,768 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [a2enmod mpm_event]
2019-05-09 14:19:36,769 [salt.state       :300 ][INFO    ][9321] /etc/apache2/mods-enabled/mpm_event.load exists
2019-05-09 14:19:36,770 [salt.state       :1951][INFO    ][9321] Completed state [a2enmod mpm_event] at time 14:19:36.770240 duration_in_ms=1.896
2019-05-09 14:19:36,772 [salt.state       :1780][INFO    ][9321] Running state [apache_server_service_task] at time 14:19:36.772795
2019-05-09 14:19:36,773 [salt.state       :1813][INFO    ][9321] Executing state test.show_notification for [apache_server_service_task]
2019-05-09 14:19:36,774 [salt.state       :300 ][INFO    ][9321] Running apache.server.service
2019-05-09 14:19:36,774 [salt.state       :1951][INFO    ][9321] Completed state [apache_server_service_task] at time 14:19:36.774515 duration_in_ms=1.721
2019-05-09 14:19:36,776 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/ports.conf] at time 14:19:36.775929
2019-05-09 14:19:36,776 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/apache2/ports.conf]
2019-05-09 14:19:36,807 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2019-05-09 14:19:36,930 [salt.state       :300 ][INFO    ][9321] File changed:
--- 
+++ 
@@ -2,14 +2,14 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
+Listen 0.0.0.0:80
 
 <IfModule ssl_module>
-	Listen 443
+	Listen 0.0.0.0:443
 </IfModule>
 
 <IfModule mod_gnutls.c>
-	Listen 443
+	Listen 0.0.0.0:443
 </IfModule>
 
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2019-05-09 14:19:36,931 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/ports.conf] at time 14:19:36.931125 duration_in_ms=155.195
2019-05-09 14:19:36,932 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/conf-available/security.conf] at time 14:19:36.932568
2019-05-09 14:19:36,933 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-05-09 14:19:36,962 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2019-05-09 14:19:37,084 [salt.state       :300 ][INFO    ][9321] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2019-05-09 14:19:37,084 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/conf-available/security.conf] at time 14:19:37.084192 duration_in_ms=151.625
2019-05-09 14:19:37,095 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-enabled/keystone.conf] at time 14:19:37.095418
2019-05-09 14:19:37,095 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/sites-enabled/keystone.conf]
2019-05-09 14:19:37,095 [salt.state       :300 ][INFO    ][9321] {'removed': '/etc/apache2/sites-enabled/keystone.conf'}
2019-05-09 14:19:37,096 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-enabled/keystone.conf] at time 14:19:37.096048 duration_in_ms=0.631
2019-05-09 14:19:37,096 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 14:19:37.096240
2019-05-09 14:19:37,096 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/sites-enabled/wsgi-keystone.conf]
2019-05-09 14:19:37,096 [salt.state       :300 ][INFO    ][9321] File /etc/apache2/sites-enabled/wsgi-keystone.conf is not present
2019-05-09 14:19:37,096 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-enabled/wsgi-keystone.conf] at time 14:19:37.096831 duration_in_ms=0.59
2019-05-09 14:19:37,098 [salt.state       :1780][INFO    ][9321] Running state [keystone_ssl_mysql] at time 14:19:37.098168
2019-05-09 14:19:37,098 [salt.state       :1813][INFO    ][9321] Executing state test.show_notification for [keystone_ssl_mysql]
2019-05-09 14:19:37,098 [salt.state       :300 ][INFO    ][9321] Running keystone._ssl.mysql
2019-05-09 14:19:37,098 [salt.state       :1951][INFO    ][9321] Completed state [keystone_ssl_mysql] at time 14:19:37.098711 duration_in_ms=0.543
2019-05-09 14:19:37,099 [salt.state       :1780][INFO    ][9321] Running state [keystone_ssl_rabbitmq] at time 14:19:37.099300
2019-05-09 14:19:37,099 [salt.state       :1813][INFO    ][9321] Executing state test.show_notification for [keystone_ssl_rabbitmq]
2019-05-09 14:19:37,099 [salt.state       :300 ][INFO    ][9321] Running keystone._ssl.rabbitmq
2019-05-09 14:19:37,099 [salt.state       :1951][INFO    ][9321] Completed state [keystone_ssl_rabbitmq] at time 14:19:37.099832 duration_in_ms=0.532
2019-05-09 14:19:37,100 [salt.state       :1780][INFO    ][9321] Running state [/etc/keystone/keystone.conf] at time 14:19:37.100648
2019-05-09 14:19:37,100 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/keystone/keystone.conf]
2019-05-09 14:19:37,132 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/files/rocky/keystone.conf.Debian'
2019-05-09 14:19:37,370 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_log.conf'
2019-05-09 14:19:37,393 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_default.conf'
2019-05-09 14:19:37,429 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_cache.conf'
2019-05-09 14:19:37,453 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_notifications.conf'
2019-05-09 14:19:37,474 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_rabbit.conf'
2019-05-09 14:19:37,522 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_database.conf'
2019-05-09 14:19:37,558 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_cors.conf'
2019-05-09 14:19:37,583 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_middleware.conf'
2019-05-09 14:19:37,614 [salt.state       :300 ][INFO    ][9321] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-log_dir = /var/log/keystone
 
 #
 # From keystone
@@ -134,7 +134,7 @@
 # Possible values:
 # basic - <No description provided>
 # cadf - <No description provided>
-#notification_format = cadf
+notification_format = basic
 
 # You can reduce the number of notifications keystone emits by explicitly
 # opting out. Keystone will not emit notifications that match the patterns
@@ -148,7 +148,6 @@
 #notification_opt_out = identity.authenticate.success
 #notification_opt_out = identity.authenticate.pending
 #notification_opt_out = identity.authenticate.failed
-
 #
 # From oslo.log
 #
@@ -312,6 +311,7 @@
 # exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
+
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
@@ -439,6 +439,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -450,6 +451,7 @@
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
 #control_exchange = keystone
+
 
 
 [application_credential]
@@ -494,6 +496,7 @@
 # A list of role names which are prohibited from being an implied role. (list
 # value)
 #prohibited_implied_role = admin
+driver = sql
 
 
 [auth]
@@ -508,6 +511,8 @@
 # are being invoked to validate attributes in the request environment, it can
 # cause conflicts. (list value)
 #methods = external,password,token,oauth1,mapped,application_credential
+
+methods = password,token
 
 # Entry point for the password auth plugin module in the
 # `keystone.auth.password` namespace. You do not need to set this unless you
@@ -549,88 +554,6 @@
 #application_credential = <None>
 
 
-[cache]
-
-#
-# From oslo.cache
-#
-
-# Prefix for building the configuration dictionary for the cache region. This
-# should not need to be changed unless there is another dogpile.cache region
-# with the same configuration name. (string value)
-#config_prefix = cache.oslo
-
-# Default TTL, in seconds, for any cached item in the dogpile.cache region.
-# This applies to any cached method that doesn't have an explicit cache
-# expiration time defined for it. (integer value)
-#expiration_time = 600
-
-# Cache backend module. For eventlet-based or environments with hundreds of
-# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
-# recommended. For environments with less than 100 threaded servers, Memcached
-# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
-# environments with a single instance of the server can use the
-# dogpile.cache.memory backend. (string value)
-# Possible values:
-# oslo_cache.memcache_pool - <No description provided>
-# oslo_cache.dict - <No description provided>
-# oslo_cache.mongo - <No description provided>
-# oslo_cache.etcd3gw - <No description provided>
-# dogpile.cache.memcached - <No description provided>
-# dogpile.cache.pylibmc - <No description provided>
-# dogpile.cache.bmemcached - <No description provided>
-# dogpile.cache.dbm - <No description provided>
-# dogpile.cache.redis - <No description provided>
-# dogpile.cache.memory - <No description provided>
-# dogpile.cache.memory_pickle - <No description provided>
-# dogpile.cache.null - <No description provided>
-#backend = dogpile.cache.null
-
-# Arguments supplied to the backend module. Specify this option once per
-# argument to be passed to the dogpile.cache backend. Example format:
-# "<argname>:<value>". (multi valued)
-#backend_argument =
-
-# Proxy classes to import that will affect the way the dogpile.cache backend
-# functions. See the dogpile.cache documentation on changing-backend-behavior.
-# (list value)
-#proxies =
-
-# Global toggle for caching. (boolean value)
-#enabled = true
-
-# Extra debugging from the cache backend (cache keys, get/set/delete/etc
-# calls). This is only really useful if you need to see the specific cache-
-# backend get/set/delete calls with the keys/values.  Typically this should be
-# left set to false. (boolean value)
-#debug_cache_backend = false
-
-# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (list value)
-#memcache_servers = localhost:11211
-
-# Number of seconds memcached server is considered dead before it is tried
-# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
-# (integer value)
-#memcache_dead_retry = 300
-
-# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (floating point value)
-#memcache_socket_timeout = 3.0
-
-# Max total number of open connections to every memcached server.
-# (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_maxsize = 10
-
-# Number of seconds a connection to memcached is held unused in the pool before
-# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_unused_timeout = 60
-
-# Number of seconds that an operation will wait to get a memcache client
-# connection. (integer value)
-#memcache_pool_connection_get_timeout = 10
-
-
 [catalog]
 
 #
@@ -639,14 +562,14 @@
 
 # Absolute path to the file used for the templated catalog backend. This option
 # is only used if the `[catalog] driver` is set to `templated`. (string value)
-#template_file = default_catalog.templates
+template_file = default_catalog.templates
 
 # Entry point for the catalog driver in the `keystone.catalog` namespace.
 # Keystone provides a `sql` option (which supports basic CRUD operations
 # through SQL), a `templated` option (which loads the catalog from a templated
 # catalog file on disk), and a `endpoint_filter.sql` option (which supports
 # arbitrary service catalogs per project). (string value)
-#driver = sql
+driver = sql
 
 # Toggle for catalog caching. This has no effect unless global caching is
 # enabled. In a typical deployment, there is no reason to disable this.
@@ -664,35 +587,6 @@
 # deployment to have enough services or endpoints to exceed a reasonable limit.
 # (integer value)
 #list_limit = <None>
-
-
-[cors]
-
-#
-# From oslo.middleware
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
 
 
 [credential]
@@ -718,123 +612,7 @@
 # of keys should be managed separately and require different rotation policies.
 # Do not share this repository with the repository used to manage keys for
 # Fernet tokens. (string value)
-#key_repository = /etc/keystone/credential-keys/
-
-
-[database]
-connection = sqlite:////var/lib/keystone/keystone.db
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+key_repository = /var/lib/keystone/credential-keys
 
 
 [domain_config]
@@ -906,7 +684,7 @@
 # Reason: Support for running keystone under eventlet has been removed in the
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
-#public_bind_host = 0.0.0.0
+#public_bind_host = 192.168.10.37
 
 # DEPRECATED: The port number for the public service to listen on. (port value)
 # Minimum value: 0
@@ -928,7 +706,7 @@
 # Reason: Support for running keystone under eventlet has been removed in the
 # Newton release. These options remain for backwards compatibility because they
 # are used for URL substitutions.
-#admin_bind_host = 0.0.0.0
+#admin_bind_host = 192.168.10.37
 
 # DEPRECATED: The port number for the admin service to listen on. (port value)
 # Minimum value: 0
@@ -943,7 +721,6 @@
 
 
 [extra_headers]
-Distribution = Ubuntu
 
 #
 # From keystone
@@ -951,7 +728,6 @@
 
 # Specifies the distribution of the keystone server. (string value)
 #Distribution = Ubuntu
-
 
 [federation]
 
@@ -998,6 +774,8 @@
 # Toggle for federation caching. This has no effect unless global caching is
 # enabled. There is typically no reason to disable this. (boolean value)
 #caching = true
+
+
 
 
 [fernet_tokens]
@@ -1027,7 +805,7 @@
 # `keystone-manage fernet_rotate` *twice* on a key repository without syncing
 # other nodes will result in tokens that can not be validated by all nodes.
 # (string value)
-#key_repository = /etc/keystone/fernet-keys/
+key_repository = /var/lib/keystone/fernet-keys
 
 # This controls how many keys are held in rotation by `keystone-manage
 # fernet_rotate` before they are discarded. The default value of 3 means that
@@ -1036,35 +814,7 @@
 # Increasing this value means that additional secondary keys will be kept in
 # the rotation. (integer value)
 # Minimum value: 1
-#max_active_keys = 3
-
-
-[healthcheck]
-
-#
-# From oslo.middleware
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
+max_active_keys = 51
 
 
 [identity]
@@ -1113,7 +863,7 @@
 # specific configuration is defined for the domain in question. Unless your
 # deployment primarily relies on `ldap` AND is not using domain-specific
 # configuration, you should typically leave this set to `sql`. (string value)
-#driver = sql
+driver = sql
 
 # Toggle for identity caching. This has no effect unless global caching is
 # enabled. There is typically no reason to disable this. (boolean value)
@@ -1499,52 +1249,6 @@
 #auth_pool_connection_lifetime = 60
 
 
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
 [memcache]
 
 #
@@ -1598,687 +1302,6 @@
 #access_token_duration = 86400
 
 
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware
-#
-
-# The maximum body size for each  request, in bytes. (integer value)
-# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
-# Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
-
-# DEPRECATED: The HTTP Header that will be used to determine what the original
-# request protocol scheme was, even if it was hidden by a SSL termination
-# proxy. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
 [policy]
 
 #
@@ -2289,127 +1312,11 @@
 # Supplied drivers are `rules` (which does not support any CRUD operations for
 # the v3 policy API) and `sql`. Typically, there is no reason to set this
 # option unless you are providing a custom entry point. (string value)
-#driver = sql
+driver = sql
 
 # Maximum number of entities that will be returned in a policy collection.
 # (integer value)
 #list_limit = <None>
-
-
-[profiler]
-
-#
-# From osprofiler
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this
-# project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format:
-# <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all
-# services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
-# spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will
-# maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
 
 
 [resource]
@@ -2830,7 +1737,7 @@
 # impact of a compromised token. (integer value)
 # Minimum value: 0
 # Maximum value: 9223372036854775807
-#expiration = 3600
+expiration = 3600
 
 # Entry point for the token provider in the `keystone.token.provider`
 # namespace. The token provider controls the token construction, validation,
@@ -2840,9 +1747,13 @@
 # command). (string value)
 #provider = fernet
 
+provider = fernet
+
+
 # Toggle for caching token creation and validation data. This has no effect
 # unless global caching is enabled. (boolean value)
 #caching = true
+caching = false
 
 # The number of seconds to cache token creation and validation data. This has
 # no effect unless both global and `[token] caching` are enabled. (integer
@@ -2888,6 +1799,8 @@
 # the built-in expiry time. This allows long running operations to succeed.
 # Defaults to two days. (integer value)
 #allow_expired_window = 172800
+
+hash_algorithm = sha256
 
 
 [tokenless_auth]
@@ -2977,7 +1890,420 @@
 # flat - <No description provided>
 # strict_two_level - <No description provided>
 #enforcement_model = flat
-
+[cache]
+#
+# From oslo.cache
+#
+
+# Prefix for building the configuration dictionary for the cache region. This
+# should not need to be changed unless there is another dogpile.cache region
+# with the same configuration name. (string value)
+#config_prefix = cache.oslo
+
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
+#expiration_time = 600
+
+# Cache backend module. For eventlet-based or environments with hundreds of
+# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
+# recommended. For environments with less than 100 threaded servers, Memcached
+# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
+# environments with a single instance of the server can use the
+# dogpile.cache.memory backend. (string value)
+# Possible values:
+# oslo_cache.memcache_pool - <No description provided>
+# oslo_cache.dict - <No description provided>
+# oslo_cache.mongo - <No description provided>
+# oslo_cache.etcd3gw - <No description provided>
+# dogpile.cache.memcached - <No description provided>
+# dogpile.cache.pylibmc - <No description provided>
+# dogpile.cache.bmemcached - <No description provided>
+# dogpile.cache.dbm - <No description provided>
+# dogpile.cache.redis - <No description provided>
+# dogpile.cache.memory - <No description provided>
+# dogpile.cache.memory_pickle - <No description provided>
+# dogpile.cache.null - <No description provided>
+#backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
+
+# Arguments supplied to the backend module. Specify this option once per
+# argument to be passed to the dogpile.cache backend. Example format:
+# "<argname>:<value>". (multi valued)
+#backend_argument =
+
+# Proxy classes to import that will affect the way the dogpile.cache backend
+# functions. See the dogpile.cache documentation on changing-backend-behavior.
+# (list value)
+#proxies =
+
+# Global toggle for caching. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
+#debug_cache_backend = false
+
+# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (list value)
+#memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# Number of seconds memcached server is considered dead before it is tried
+# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
+# (integer value)
+#memcache_dead_retry = 300
+
+# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
+# oslo_cache.memcache_pool backends only). (floating point value)
+#memcache_socket_timeout = 3.0
+
+# Max total number of open connections to every memcached server.
+# (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_maxsize = 10
+
+# Number of seconds a connection to memcached is held unused in the pool before
+# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
+#memcache_pool_unused_timeout = 60
+
+# Number of seconds that an operation will wait to get a memcache client
+# connection. (integer value)
+#memcache_pool_connection_get_timeout = 10
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Connect over SSL. (boolean value)
+# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
+#ssl = false
+
+# How long to wait before reconnecting in response to an AMQP consumer cancel
+# notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
+# be used. This option may not be available in future versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its replies.
+# This value should not be longer than rpc_response_timeout. (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we are
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ. (integer
+# value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
+# (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
+# (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
+# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL (x-expires).
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+#rabbit_qos_prefetch_count = 0
+
+# Number of seconds after which the Rabbit broker is considered down if
+# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
+# value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+
+[oslo_policy]
+
+[database]
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database. (string
+# value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://keystone:opnfv_secret@192.168.10.23/keystone?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster (NDB).
+# (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer than this
+# number of seconds will be replaced with a new one the next time they are
+# checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to set the minimum pool size is not supported by
+# sqlalchemy.
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
+
+# Optional URL parameters to append onto the connection URL at connect time;
+# specify as param1=value1&param2=value2&... (string value)
+#connection_parameters =
+
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain received in the
+# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
+# slash. Example: https://horizon.example.com (list value)
+#allowed_origin = <None>
+
+# Indicate that the actual request can include user credentials (boolean value)
+#allow_credentials = true
+
+# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
+# Headers. (list value)
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
+
+# Maximum cache age of CORS preflight requests. (integer value)
+#max_age = 3600
+
+# Indicate which methods can be used during the actual request. (list value)
+#allow_methods = GET,PUT,POST,DELETE,PATCH
+
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
+
+[healthcheck]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+max_request_body_size= 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if the
+# middleware should parse the headers or not. (boolean value)
+#enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
+
+[profiler]
 
 [wsgi]
 

2019-05-09 14:19:37,616 [salt.state       :1951][INFO    ][9321] Completed state [/etc/keystone/keystone.conf] at time 14:19:37.616622 duration_in_ms=515.972
2019-05-09 14:19:37,618 [salt.state       :1780][INFO    ][9321] Running state [/etc/keystone/keystone-paste.ini] at time 14:19:37.618404
2019-05-09 14:19:37,618 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/keystone/keystone-paste.ini]
2019-05-09 14:19:37,645 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/files/rocky/keystone-paste.ini.Debian'
2019-05-09 14:19:37,661 [salt.state       :300 ][INFO    ][9321] File changed:
--- 
+++ 
@@ -1,8 +1,3 @@
-# !!! WARNING: THIS FILE IS NO LONGER USED. KEYSTONE IS LOADED DIRECTLY AND
-# !!!          WILL IGNORE THIS FILE. THIS FILE WILL BE REMOVED IN THE STEIN
-# !!!          RELEASE. IT IS BEING MAINTAINED TO EASE THE TRANSITION OF THE
-# !!!          DEPLOYMENT TOOLING IN THE WILD.
-
 # Keystone PasteDeploy configuration file.
 
 [filter:debug]
@@ -13,6 +8,9 @@
 
 [filter:build_auth_context]
 use = egg:keystone#build_auth_context
+
+[filter:token_auth]
+use = egg:keystone#token_auth
 
 [filter:json_body]
 use = egg:keystone#json_body
@@ -57,17 +55,17 @@
 [pipeline:public_api]
 # The last item in this pipeline must be public_service or an equivalent
 # application. It cannot be a filter.
-pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context json_body ec2_extension public_service
+pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context token_auth json_body ec2_extension public_service
 
 [pipeline:admin_api]
 # The last item in this pipeline must be admin_service or an equivalent
 # application. It cannot be a filter.
-pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context json_body ec2_extension s3_extension admin_service
+pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context token_auth json_body ec2_extension s3_extension admin_service
 
 [pipeline:api_v3]
 # The last item in this pipeline must be service_v3 or an equivalent
 # application. It cannot be a filter.
-pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context json_body ec2_extension_v3 s3_extension service_v3
+pipeline = healthcheck cors sizelimit http_proxy_to_wsgi osprofiler url_normalize request_id build_auth_context token_auth json_body ec2_extension_v3 s3_extension service_v3
 
 [app:public_version_service]
 use = egg:keystone#public_version_service

2019-05-09 14:19:37,661 [salt.state       :1951][INFO    ][9321] Completed state [/etc/keystone/keystone-paste.ini] at time 14:19:37.661642 duration_in_ms=43.238
2019-05-09 14:19:37,662 [salt.state       :1780][INFO    ][9321] Running state [/etc/keystone/policy.json] at time 14:19:37.662784
2019-05-09 14:19:37,663 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/keystone/policy.json]
2019-05-09 14:19:37,663 [salt.loaded.int.states.file:2298][WARNING ][9321] State for file: /etc/keystone/policy.json - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-05-09 14:19:37,666 [salt.state       :300 ][INFO    ][9321] {'new': 'file /etc/keystone/policy.json created', 'group': 'keystone', 'mode': '0640'}
2019-05-09 14:19:37,666 [salt.state       :1951][INFO    ][9321] Completed state [/etc/keystone/policy.json] at time 14:19:37.666336 duration_in_ms=3.552
2019-05-09 14:19:37,666 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 14:19:37.666758
2019-05-09 14:19:37,667 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-05-09 14:19:37,667 [salt.state       :300 ][INFO    ][9321] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2019-05-09 14:19:37,668 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 14:19:37.668115 duration_in_ms=1.358
2019-05-09 14:19:37,669 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:19:37.669220
2019-05-09 14:19:37,669 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-05-09 14:19:37,694 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2019-05-09 14:19:37,737 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2019-05-09 14:19:37,851 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2019-05-09 14:19:37,895 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2019-05-09 14:19:38,085 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2019-05-09 14:19:38,104 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2019-05-09 14:19:38,125 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2019-05-09 14:19:38,134 [salt.state       :300 ][INFO    ][9321] File changed:
New file
2019-05-09 14:19:38,134 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:19:38.134889 duration_in_ms=465.67
2019-05-09 14:19:38,135 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:19:38.135433
2019-05-09 14:19:38,135 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-05-09 14:19:38,367 [salt.state       :300 ][INFO    ][9321] File changed:
New file
2019-05-09 14:19:38,368 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:19:38.368058 duration_in_ms=232.625
2019-05-09 14:19:38,368 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:19:38.368861
2019-05-09 14:19:38,369 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-05-09 14:19:38,390 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/files/apache.conf'
2019-05-09 14:19:38,457 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/files/rocky/wsgi-keystone.conf'
2019-05-09 14:19:38,786 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'apache/files/_locations.conf'
2019-05-09 14:19:38,837 [salt.state       :300 ][INFO    ][9321] File changed:
New file
2019-05-09 14:19:38,838 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:19:38.838008 duration_in_ms=469.146
2019-05-09 14:19:38,839 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:19:38.839011
2019-05-09 14:19:38,839 [salt.state       :1813][INFO    ][9321] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-05-09 14:19:38,841 [salt.state       :300 ][INFO    ][9321] {'new': '/etc/apache2/sites-enabled/keystone_wsgi.conf'}
2019-05-09 14:19:38,842 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:19:38.842148 duration_in_ms=3.136
2019-05-09 14:19:38,850 [salt.state       :1780][INFO    ][9321] Running state [apache2] at time 14:19:38.850183
2019-05-09 14:19:38,850 [salt.state       :1813][INFO    ][9321] Executing state service.running for [apache2]
2019-05-09 14:19:38,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-05-09 14:19:38,861 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509141938850228
2019-05-09 14:19:38,883 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:19:38,884 [salt.minion      :1432][INFO    ][13328] Starting a new job with PID 13328
2019-05-09 14:19:38,911 [salt.minion      :1711][INFO    ][13328] Returning information for job: 20190509141938850228
2019-05-09 14:19:38,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:19:38,946 [salt.state       :300 ][INFO    ][9321] The service apache2 is already running
2019-05-09 14:19:38,947 [salt.state       :1951][INFO    ][9321] Completed state [apache2] at time 14:19:38.947137 duration_in_ms=96.954
2019-05-09 14:19:38,947 [salt.state       :1780][INFO    ][9321] Running state [apache2] at time 14:19:38.947767
2019-05-09 14:19:38,948 [salt.state       :1813][INFO    ][9321] Executing state service.mod_watch for [apache2]
2019-05-09 14:19:38,950 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:19:38,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2019-05-09 14:19:39,301 [salt.state       :300 ][INFO    ][9321] {'apache2': True}
2019-05-09 14:19:39,302 [salt.state       :1951][INFO    ][9321] Completed state [apache2] at time 14:19:39.302091 duration_in_ms=354.321
2019-05-09 14:19:39,306 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/conf-enabled/security.conf] at time 14:19:39.305994
2019-05-09 14:19:39,307 [salt.state       :1813][INFO    ][9321] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-05-09 14:19:39,318 [salt.state       :300 ][INFO    ][9321] {'new': '/etc/apache2/conf-enabled/security.conf'}
2019-05-09 14:19:39,319 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/conf-enabled/security.conf] at time 14:19:39.319335 duration_in_ms=13.342
2019-05-09 14:19:39,320 [salt.state       :1780][INFO    ][9321] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:19:39.320054
2019-05-09 14:19:39,320 [salt.state       :1813][INFO    ][9321] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-05-09 14:19:39,321 [salt.state       :300 ][INFO    ][9321] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-05-09 14:19:39,322 [salt.state       :1951][INFO    ][9321] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:19:39.322279 duration_in_ms=2.226
2019-05-09 14:19:39,324 [salt.state       :1780][INFO    ][9321] Running state [keystone-manage db_sync && sleep 1] at time 14:19:39.324730
2019-05-09 14:19:39,325 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [keystone-manage db_sync && sleep 1]
2019-05-09 14:19:39,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command '/bin/false' as user 'keystone' in directory '/var/lib/keystone'
2019-05-09 14:19:39,483 [salt.state       :300 ][INFO    ][9321] onlyif execution failed
2019-05-09 14:19:39,483 [salt.state       :1951][INFO    ][9321] Completed state [keystone-manage db_sync && sleep 1] at time 14:19:39.483521 duration_in_ms=158.791
2019-05-09 14:19:39,484 [salt.state       :1780][INFO    ][9321] Running state [keystone] at time 14:19:39.484747
2019-05-09 14:19:39,485 [salt.state       :1813][INFO    ][9321] Executing state service.dead for [keystone]
2019-05-09 14:19:39,485 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemctl', 'status', 'keystone.service', '-n', '0'] in directory '/root'
2019-05-09 14:19:39,498 [salt.state       :300 ][INFO    ][9321] The named service keystone is not available
2019-05-09 14:19:39,499 [salt.state       :1951][INFO    ][9321] Completed state [keystone] at time 14:19:39.499233 duration_in_ms=14.486
2019-05-09 14:19:39,499 [salt.state       :1780][INFO    ][9321] Running state [keystone] at time 14:19:39.499538
2019-05-09 14:19:39,499 [salt.state       :1813][INFO    ][9321] Executing state service.mod_watch for [keystone]
2019-05-09 14:19:39,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command ['systemctl', 'is-active', 'keystone.service'] in directory '/root'
2019-05-09 14:19:39,513 [salt.state       :300 ][INFO    ][9321] Service is already stopped
2019-05-09 14:19:39,514 [salt.state       :1951][INFO    ][9321] Completed state [keystone] at time 14:19:39.514291 duration_in_ms=14.753
2019-05-09 14:19:39,515 [salt.state       :1780][INFO    ][9321] Running state [/root/keystonerc] at time 14:19:39.515318
2019-05-09 14:19:39,515 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/root/keystonerc]
2019-05-09 14:19:39,538 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonerc'
2019-05-09 14:19:39,580 [salt.state       :300 ][INFO    ][9321] File changed:
New file
2019-05-09 14:19:39,580 [salt.state       :1951][INFO    ][9321] Completed state [/root/keystonerc] at time 14:19:39.580786 duration_in_ms=65.468
2019-05-09 14:19:39,581 [salt.state       :1780][INFO    ][9321] Running state [/root/keystonercv3] at time 14:19:39.581881
2019-05-09 14:19:39,582 [salt.state       :1813][INFO    ][9321] Executing state file.managed for [/root/keystonercv3]
2019-05-09 14:19:39,603 [salt.fileclient  :1219][INFO    ][9321] Fetching file from saltenv 'base', ** done ** 'keystone/files/keystonercv3'
2019-05-09 14:19:39,651 [salt.state       :300 ][INFO    ][9321] File changed:
New file
2019-05-09 14:19:39,651 [salt.state       :1951][INFO    ][9321] Completed state [/root/keystonercv3] at time 14:19:39.651695 duration_in_ms=69.814
2019-05-09 14:19:39,652 [salt.state       :1780][INFO    ][9321] Running state [/var/lib/keystone/fernet-keys] at time 14:19:39.652591
2019-05-09 14:19:39,652 [salt.state       :1813][INFO    ][9321] Executing state file.directory for [/var/lib/keystone/fernet-keys]
2019-05-09 14:19:39,655 [salt.state       :300 ][INFO    ][9321] Directory /var/lib/keystone/fernet-keys is in the correct state
Directory /var/lib/keystone/fernet-keys updated
2019-05-09 14:19:39,656 [salt.state       :1951][INFO    ][9321] Completed state [/var/lib/keystone/fernet-keys] at time 14:19:39.656696 duration_in_ms=4.103
2019-05-09 14:19:39,659 [salt.state       :1780][INFO    ][9321] Running state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 14:19:39.659489
2019-05-09 14:19:39,660 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone]
2019-05-09 14:19:39,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command 'keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone' as user 'keystone' in directory '/var/lib/keystone'
2019-05-09 14:19:41,526 [salt.state       :300 ][INFO    ][9321] {'pid': 13507, 'retcode': 0, 'stderr': '', 'stdout': '2019-05-09 14:19:41.457 13513 INFO keystone.common.fernet_utils [-] Key repository is already initialized; aborting.\x1b[00m'}
2019-05-09 14:19:41,526 [salt.state       :1951][INFO    ][9321] Completed state [keystone-manage fernet_setup --keystone-user keystone --keystone-group keystone] at time 14:19:41.526663 duration_in_ms=1867.174
2019-05-09 14:19:41,527 [salt.state       :1780][INFO    ][9321] Running state [/var/lib/keystone/credential-keys] at time 14:19:41.527798
2019-05-09 14:19:41,528 [salt.state       :1813][INFO    ][9321] Executing state file.directory for [/var/lib/keystone/credential-keys]
2019-05-09 14:19:41,532 [salt.state       :300 ][INFO    ][9321] Directory /var/lib/keystone/credential-keys is in the correct state
Directory /var/lib/keystone/credential-keys updated
2019-05-09 14:19:41,533 [salt.state       :1951][INFO    ][9321] Completed state [/var/lib/keystone/credential-keys] at time 14:19:41.533161 duration_in_ms=5.363
2019-05-09 14:19:41,534 [salt.state       :1780][INFO    ][9321] Running state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 14:19:41.534433
2019-05-09 14:19:41,534 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone]
2019-05-09 14:19:41,535 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command 'keystone-manage credential_setup --keystone-user keystone --keystone-group keystone' as user 'keystone' in directory '/var/lib/keystone'
2019-05-09 14:19:43,216 [salt.state       :300 ][INFO    ][9321] {'pid': 13630, 'retcode': 0, 'stderr': '', 'stdout': '2019-05-09 14:19:43.153 13633 INFO keystone.common.fernet_utils [-] Key repository is already initialized; aborting.\x1b[00m'}
2019-05-09 14:19:43,216 [salt.state       :1951][INFO    ][9321] Completed state [keystone-manage credential_setup --keystone-user keystone --keystone-group keystone] at time 14:19:43.216744 duration_in_ms=1682.31
2019-05-09 14:19:43,217 [salt.state       :1780][INFO    ][9321] Running state [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.37:5000] at time 14:19:43.217184
2019-05-09 14:19:43,217 [salt.state       :1813][INFO    ][9321] Executing state cmd.run for [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.37:5000]
2019-05-09 14:19:43,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command '. /root/keystonercv3; openstack endpoint list --service identity --interface internal -f value -c URL  |grep 5000' as user 'keystone' in directory '/var/lib/keystone'
2019-05-09 14:19:43,276 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9321] Executing command 'keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.37:5000' as user 'keystone' in directory '/var/lib/keystone'
2019-05-09 14:19:45,887 [salt.state       :300 ][INFO    ][9321] {'pid': 13690, 'retcode': 0, 'stderr': '', 'stdout': '2019-05-09 14:19:45.018 13696 INFO keystone.cmd.bootstrap [-] Domain default already exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.039 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Project admin already exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.075 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] User admin already exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.455 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Role reader exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.465 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Role member exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.484 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Implied role where 65d4d68dd1d247ad8cc161e5abc9586f implies 4539aab8308641019287aae88063ac6c exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.489 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Role admin exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.507 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Implied role where 57bb89e65f574169a0d082ad16b2bc87 implies 65d4d68dd1d247ad8cc161e5abc9586f exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.710 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] User admin already has admin on admin.\x1b[00m\n2019-05-09 14:19:45.721 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Granted admin on the system to user admin.\x1b[00m\n2019-05-09 14:19:45.723 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Region RegionOne exists, skipping creation.\x1b[00m\n2019-05-09 14:19:45.741 13696 INFO keystone.cmd.bootstrap [req-e6b5737c-eb82-44e9-baeb-3c25d2bd38ea - - - - -] Skipping internal endpoint as already created\x1b[00m'}
2019-05-09 14:19:45,888 [salt.state       :1951][INFO    ][9321] Completed state [keystone-manage bootstrap --bootstrap-password opnfv_secret --bootstrap-username admin --bootstrap-project-name admin --bootstrap-role-name admin --bootstrap-service-name keystone --bootstrap-region-id RegionOne --bootstrap-internal-url http://192.168.10.37:5000] at time 14:19:45.887875 duration_in_ms=2670.688
2019-05-09 14:19:45,894 [salt.minion      :1711][INFO    ][9321] Returning information for job: 20190509141823529625
2019-05-09 14:19:49,849 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command service.restart with jid 20190509141949837119
2019-05-09 14:19:49,875 [salt.minion      :1432][INFO    ][13719] Starting a new job with PID 13719
2019-05-09 14:19:51,082 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][13719] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-05-09 14:19:51,128 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][13719] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-05-09 14:19:53,530 [salt.minion      :1711][INFO    ][13719] Returning information for job: 20190509141949837119
2019-05-09 14:19:54,332 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509141954326390
2019-05-09 14:19:54,355 [salt.minion      :1432][INFO    ][13994] Starting a new job with PID 13994
2019-05-09 14:20:01,872 [salt.state       :915 ][INFO    ][13994] Loading fresh modules for state activity
2019-05-09 14:20:01,981 [salt.fileclient  :1219][INFO    ][13994] Fetching file from saltenv 'base', ** done ** 'keystone/client/init.sls'
2019-05-09 14:20:02,036 [salt.fileclient  :1219][INFO    ][13994] Fetching file from saltenv 'base', ** done ** 'keystone/client/service.sls'
2019-05-09 14:20:02,162 [salt.fileclient  :1219][INFO    ][13994] Fetching file from saltenv 'base', ** done ** 'keystone/client/project.sls'
2019-05-09 14:20:02,251 [salt.fileclient  :1219][INFO    ][13994] Fetching file from saltenv 'base', ** done ** 'keystone/client/server.sls'
2019-05-09 14:20:02,355 [salt.fileclient  :1219][INFO    ][13994] Fetching file from saltenv 'base', ** done ** 'keystone/client/os_client_config.sls'
2019-05-09 14:20:02,438 [salt.fileclient  :1219][INFO    ][13994] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/init.sls'
2019-05-09 14:20:02,458 [salt.fileclient  :1219][INFO    ][13994] Fetching file from saltenv 'base', ** done ** 'keystone/client/resources/v3.sls'
2019-05-09 14:20:03,617 [salt.state       :1780][INFO    ][13994] Running state [python-os-client-config] at time 14:20:03.617884
2019-05-09 14:20:03,618 [salt.state       :1813][INFO    ][13994] Executing state pkg.installed for [python-os-client-config]
2019-05-09 14:20:03,618 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13994] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:20:04,055 [salt.state       :300 ][INFO    ][13994] All specified packages are already installed
2019-05-09 14:20:04,056 [salt.state       :1951][INFO    ][13994] Completed state [python-os-client-config] at time 14:20:04.056128 duration_in_ms=438.244
2019-05-09 14:20:04,059 [salt.state       :1780][INFO    ][13994] Running state [/root/.config/openstack/clouds.yml] at time 14:20:04.059909
2019-05-09 14:20:04,060 [salt.state       :1813][INFO    ][13994] Executing state file.managed for [/root/.config/openstack/clouds.yml]
2019-05-09 14:20:04,063 [salt.state       :300 ][INFO    ][13994] File changed:
New file
2019-05-09 14:20:04,064 [salt.state       :1951][INFO    ][13994] Completed state [/root/.config/openstack/clouds.yml] at time 14:20:04.064029 duration_in_ms=4.12
2019-05-09 14:20:04,065 [salt.minion      :1711][INFO    ][13994] Returning information for job: 20190509141954326390
2019-05-09 14:24:09,281 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command cmd.run with jid 20190509142409275856
2019-05-09 14:24:09,308 [salt.minion      :1432][INFO    ][14070] Starting a new job with PID 14070
2019-05-09 14:24:09,322 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][14070] Executing command '. /root/keystonercv3; openstack service list' in directory '/root'
2019-05-09 14:24:12,382 [salt.minion      :1711][INFO    ][14070] Returning information for job: 20190509142409275856
2019-05-09 14:25:01,850 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509142501843292
2019-05-09 14:25:01,875 [salt.minion      :1432][INFO    ][14082] Starting a new job with PID 14082
2019-05-09 14:25:08,386 [salt.state       :915 ][INFO    ][14082] Loading fresh modules for state activity
2019-05-09 14:25:08,504 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/init.sls'
2019-05-09 14:25:08,565 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/server.sls'
2019-05-09 14:25:08,849 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/db/offline_sync.sls'
2019-05-09 14:25:08,901 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/_ssl/mysql.sls'
2019-05-09 14:25:08,966 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/_ssl/rabbitmq.sls'
2019-05-09 14:25:10,108 [salt.state       :1780][INFO    ][14082] Running state [glance] at time 14:25:10.108311
2019-05-09 14:25:10,108 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [glance]
2019-05-09 14:25:10,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:25:10,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['apt-cache', '-q', 'policy', 'glance'] in directory '/root'
2019-05-09 14:25:10,507 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:25:12,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:25:12,975 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'glance'] in directory '/root'
2019-05-09 14:25:16,891 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509142516878690
2019-05-09 14:25:16,919 [salt.minion      :1432][INFO    ][14620] Starting a new job with PID 14620
2019-05-09 14:25:16,954 [salt.minion      :1711][INFO    ][14620] Returning information for job: 20190509142516878690
2019-05-09 14:25:32,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:25:32,619 [salt.state       :300 ][INFO    ][14082] Made the following changes:
'python-retrying' changed from 'absent' to '1.3.3-1'
'libblas.so.3' changed from 'absent' to '1'
'python-os-win' changed from 'absent' to '3.0.0-1.0~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp6'
'python-os-brick' changed from 'absent' to '2.5.6-1~u16.04+mcp3'
'python-oslo.vmware' changed from 'absent' to '2.26.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'glance' changed from 'absent' to '2:17.0.0-1~u16.04+mcp35'
'python2.7-numpy' changed from 'absent' to '1'
'glance-store-common' changed from 'absent' to '0.26.1-1~u16.04+mcp6'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-f2py' changed from 'absent' to '1'
'python2.7-glance' changed from 'absent' to '1'
'os-brick-common' changed from 'absent' to '2.5.6-1~u16.04+mcp3'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-semantic-version' changed from 'absent' to '2.3.1-1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'glance-common' changed from 'absent' to '2:17.0.0-1~u16.04+mcp35'
'python-glance-store' changed from 'absent' to '0.26.1-1~u16.04+mcp6'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-doc8' changed from 'absent' to '0.6.0-3'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp6'
'python-numpy-dev' changed from 'absent' to '1'
'python-taskflow' changed from 'absent' to '3.1.0-1.0~u16.04+mcp9'
'python-oslo.privsep' changed from 'absent' to '1.29.0-1~u16.04+mcp'
'liblapack.so.3' changed from 'absent' to '1'
'python-automaton' changed from 'absent' to '1.15.0-1.0~u16.04+mcp5'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-cursive' changed from 'absent' to '0.2.1-1.0~u16.04+mcp1'
'python-httplib2' changed from 'absent' to '0.9.1+dfsg-1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-glance' changed from 'absent' to '2:17.0.0-1~u16.04+mcp35'
'python-numpy-api10' changed from 'absent' to '1'
'python-barbicanclient' changed from 'absent' to '4.7.2-2~u16.04+mcp4'
'python-castellan' changed from 'absent' to '0.19.0-1~u16.04+mcp4'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'glance-api' changed from 'absent' to '2:17.0.0-1~u16.04+mcp35'
'python-suds' changed from 'absent' to '0.7~git20150727.94664dd-3'
'python-networkx' changed from 'absent' to '1.11-1ubuntu1'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-restructuredtext-lint' changed from 'absent' to '0.12.2-2'
'glance-registry' changed from 'absent' to '2:17.0.0-1~u16.04+mcp35'

2019-05-09 14:25:32,645 [salt.state       :915 ][INFO    ][14082] Loading fresh modules for state activity
2019-05-09 14:25:32,678 [salt.state       :1951][INFO    ][14082] Completed state [glance] at time 14:25:32.678123 duration_in_ms=22569.813
2019-05-09 14:25:32,682 [salt.state       :1780][INFO    ][14082] Running state [glance-api] at time 14:25:32.682719
2019-05-09 14:25:32,682 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [glance-api]
2019-05-09 14:25:33,309 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,309 [salt.state       :1951][INFO    ][14082] Completed state [glance-api] at time 14:25:33.309718 duration_in_ms=626.998
2019-05-09 14:25:33,310 [salt.state       :1780][INFO    ][14082] Running state [glance-registry] at time 14:25:33.309987
2019-05-09 14:25:33,310 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [glance-registry]
2019-05-09 14:25:33,318 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,318 [salt.state       :1951][INFO    ][14082] Completed state [glance-registry] at time 14:25:33.318743 duration_in_ms=8.755
2019-05-09 14:25:33,318 [salt.state       :1780][INFO    ][14082] Running state [glance-common] at time 14:25:33.318928
2019-05-09 14:25:33,319 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [glance-common]
2019-05-09 14:25:33,326 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,326 [salt.state       :1951][INFO    ][14082] Completed state [glance-common] at time 14:25:33.326439 duration_in_ms=7.511
2019-05-09 14:25:33,326 [salt.state       :1780][INFO    ][14082] Running state [python-glance] at time 14:25:33.326630
2019-05-09 14:25:33,326 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [python-glance]
2019-05-09 14:25:33,333 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,334 [salt.state       :1951][INFO    ][14082] Completed state [python-glance] at time 14:25:33.334127 duration_in_ms=7.497
2019-05-09 14:25:33,334 [salt.state       :1780][INFO    ][14082] Running state [python-glance-store] at time 14:25:33.334314
2019-05-09 14:25:33,334 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [python-glance-store]
2019-05-09 14:25:33,341 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,342 [salt.state       :1951][INFO    ][14082] Completed state [python-glance-store] at time 14:25:33.342068 duration_in_ms=7.754
2019-05-09 14:25:33,342 [salt.state       :1780][INFO    ][14082] Running state [python-glanceclient] at time 14:25:33.342254
2019-05-09 14:25:33,342 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [python-glanceclient]
2019-05-09 14:25:33,349 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,349 [salt.state       :1951][INFO    ][14082] Completed state [python-glanceclient] at time 14:25:33.349785 duration_in_ms=7.531
2019-05-09 14:25:33,350 [salt.state       :1780][INFO    ][14082] Running state [gettext-base] at time 14:25:33.349978
2019-05-09 14:25:33,350 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [gettext-base]
2019-05-09 14:25:33,357 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,357 [salt.state       :1951][INFO    ][14082] Completed state [gettext-base] at time 14:25:33.357336 duration_in_ms=7.358
2019-05-09 14:25:33,357 [salt.state       :1780][INFO    ][14082] Running state [python-memcache] at time 14:25:33.357522
2019-05-09 14:25:33,357 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [python-memcache]
2019-05-09 14:25:33,364 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,364 [salt.state       :1951][INFO    ][14082] Completed state [python-memcache] at time 14:25:33.364843 duration_in_ms=7.32
2019-05-09 14:25:33,365 [salt.state       :1780][INFO    ][14082] Running state [python-pycadf] at time 14:25:33.365042
2019-05-09 14:25:33,365 [salt.state       :1813][INFO    ][14082] Executing state pkg.installed for [python-pycadf]
2019-05-09 14:25:33,372 [salt.state       :300 ][INFO    ][14082] All specified packages are already installed
2019-05-09 14:25:33,372 [salt.state       :1951][INFO    ][14082] Completed state [python-pycadf] at time 14:25:33.372454 duration_in_ms=7.412
2019-05-09 14:25:33,374 [salt.state       :1780][INFO    ][14082] Running state [/etc/glance/glance-cache.conf] at time 14:25:33.374166
2019-05-09 14:25:33,374 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/glance/glance-cache.conf]
2019-05-09 14:25:33,405 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-cache.conf.Debian'
2019-05-09 14:25:33,482 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2019-05-09 14:25:33,505 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2019-05-09 14:25:33,525 [salt.state       :300 ][INFO    ][14082] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -28,44 +29,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -77,10 +45,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -137,7 +107,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -150,8 +121,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -268,9 +239,10 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
 #show_multiple_locations = false
 
 #
@@ -302,18 +274,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -322,6 +301,40 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -335,18 +348,44 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
 
 #
-#                     DEPRECATED FOR REMOVAL
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -380,8 +419,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -399,7 +438,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -486,26 +525,55 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
-
-#
-# The relative path to sqlite file database that will be used for image cache
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
+
+#
+# The relative path to sqlite file database that will be used for
+# image cache
 # management.
 #
-# This is a relative path to the sqlite file database that tracks the age and
-# usage statistics of image cache. The path is relative to image cache base
-# directory, specified by the configuration option ``image_cache_dir``.
+# This is a relative path to the sqlite file database that tracks the
+# age and
+# usage statistics of image cache. The path is relative to image cache
+# base
+# directory, specified by the configuration option
+# ``image_cache_dir``.
 #
 # This is a lightweight database with just one table.
 #
@@ -521,23 +589,33 @@
 #
 # The driver to use for image cache management.
 #
-# This configuration option provides the flexibility to choose between the
-# different image-cache drivers available. An image-cache driver is responsible
-# for providing the essential functions of image-cache like write images to/read
-# images from cache, track age and usage of cached images, provide a list of
-# cached images, fetch size of the cache, queue images for caching and clean up
+# This configuration option provides the flexibility to choose between
+# the
+# different image-cache drivers available. An image-cache driver is
+# responsible
+# for providing the essential functions of image-cache like write
+# images to/read
+# images from cache, track age and usage of cached images, provide a
+# list of
+# cached images, fetch size of the cache, queue images for caching and
+# clean up
 # the cache, etc.
 #
 # The essential functions of a driver are defined in the base class
-# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing
-# and prospective) must implement this interface. Currently available drivers
-# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they
+# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers
+# (existing
+# and prospective) must implement this interface. Currently available
+# drivers
+# are ``sqlite`` and ``xattr``. These drivers primarily differ in the
+# way they
 # store the information about cached images:
-#     * The ``sqlite`` driver uses a sqlite database (which sits on every glance
+#     * The ``sqlite`` driver uses a sqlite database (which sits on
+# every glance
 #     node locally) to track the usage of cached images.
-#     * The ``xattr`` driver uses the extended attributes of files to store this
-#     information. It also requires a filesystem that sets ``atime`` on the
-# files
+#     * The ``xattr`` driver uses the extended attributes of files to
+# store this
+#     information. It also requires a filesystem that sets ``atime``
+# on the files
 #     when accessed.
 #
 # Possible values:
@@ -554,21 +632,32 @@
 #image_cache_driver = sqlite
 
 #
-# The upper limit on cache size, in bytes, after which the cache-pruner cleans
+# The upper limit on cache size, in bytes, after which the cache-
+# pruner cleans
 # up the image cache.
 #
-# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a
-# hard limit beyond which the image cache would never grow. In fact, depending
-# on how often the cache-pruner runs and how quickly the cache fills, the image
-# cache can far exceed the size specified here very easily. Hence, care must be
-# taken to appropriately schedule the cache-pruner and in setting this limit.
-#
-# Glance caches an image when it is downloaded. Consequently, the size of the
-# image cache grows over time as the number of downloads increases. To keep the
+# NOTE: This is just a threshold for cache-pruner to act upon. It is
+# NOT a
+# hard limit beyond which the image cache would never grow. In fact,
+# depending
+# on how often the cache-pruner runs and how quickly the cache fills,
+# the image
+# cache can far exceed the size specified here very easily. Hence,
+# care must be
+# taken to appropriately schedule the cache-pruner and in setting this
+# limit.
+#
+# Glance caches an image when it is downloaded. Consequently, the size
+# of the
+# image cache grows over time as the number of downloads increases. To
+# keep the
 # cache size from becoming unmanageable, it is recommended to run the
-# cache-pruner as a periodic task. When the cache pruner is kicked off, it
-# compares the current size of image cache and triggers a cleanup if the image
-# cache grew beyond the size specified here. After the cleanup, the size of
+# cache-pruner as a periodic task. When the cache pruner is kicked
+# off, it
+# compares the current size of image cache and triggers a cleanup if
+# the image
+# cache grew beyond the size specified here. After the cleanup, the
+# size of
 # cache is less than or equal to size specified here.
 #
 # Possible values:
@@ -581,19 +670,36 @@
 # Minimum value: 0
 #image_cache_max_size = 10737418240
 
-#
-# The amount of time, in seconds, an incomplete image remains in the cache.
-#
-# Incomplete images are images for which download is in progress. Please see the
-# description of configuration option ``image_cache_dir`` for more detail.
-# Sometimes, due to various reasons, it is possible the download may hang and
-# the incompletely downloaded image remains in the ``incomplete`` directory.
-# This configuration option sets a time limit on how long the incomplete images
-# should remain in the ``incomplete`` directory before they are cleaned up.
-# Once an incomplete image spends more time than is specified here, it'll be
+image_cache_max_size = 10737418240
+image_cache_stall_time = 86400
+image_cache_dir = /var/lib/glance/image-cache/
+
+
+os_region_name = RegionOne
+
+
+#
+# The amount of time, in seconds, an incomplete image remains in the
+# cache.
+#
+# Incomplete images are images for which download is in progress.
+# Please see the
+# description of configuration option ``image_cache_dir`` for more
+# detail.
+# Sometimes, due to various reasons, it is possible the download may
+# hang and
+# the incompletely downloaded image remains in the ``incomplete``
+# directory.
+# This configuration option sets a time limit on how long the
+# incomplete images
+# should remain in the ``incomplete`` directory before they are
+# cleaned up.
+# Once an incomplete image spends more time than is specified here,
+# it'll be
 # removed by cache-cleaner on its next run.
 #
-# It is recommended to run cache-cleaner as a periodic task on the Glance API
+# It is recommended to run cache-cleaner as a periodic task on the
+# Glance API
 # nodes to keep the incomplete images from occupying disk space.
 #
 # Possible values:
@@ -609,25 +715,39 @@
 #
 # Base directory for image cache.
 #
-# This is the location where image data is cached and served out of. All cached
-# images are stored directly under this directory. This directory also contains
-# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``.
-#
-# The ``incomplete`` subdirectory is the staging area for downloading images. An
-# image is first downloaded to this directory. When the image download is
-# successful it is moved to the base directory. However, if the download fails,
-# the partially downloaded image file is moved to the ``invalid`` subdirectory.
-#
-# The ``queue``subdirectory is used for queuing images for download. This is
-# used primarily by the cache-prefetcher, which can be scheduled as a periodic
-# task like cache-pruner and cache-cleaner, to cache images ahead of their
-# usage.
-# Upon receiving the request to cache an image, Glance touches a file in the
-# ``queue`` directory with the image id as the file name. The cache-prefetcher,
+# This is the location where image data is cached and served out of.
+# All cached
+# images are stored directly under this directory. This directory also
+# contains
+# three subdirectories, namely, ``incomplete``, ``invalid`` and
+# ``queue``.
+#
+# The ``incomplete`` subdirectory is the staging area for downloading
+# images. An
+# image is first downloaded to this directory. When the image download
+# is
+# successful it is moved to the base directory. However, if the
+# download fails,
+# the partially downloaded image file is moved to the ``invalid``
+# subdirectory.
+#
+# The ``queue``subdirectory is used for queuing images for download.
+# This is
+# used primarily by the cache-prefetcher, which can be scheduled as a
+# periodic
+# task like cache-pruner and cache-cleaner, to cache images ahead of
+# their usage.
+# Upon receiving the request to cache an image, Glance touches a file
+# in the
+# ``queue`` directory with the image id as the file name. The cache-
+# prefetcher,
 # when running, polls for the files in ``queue`` directory and starts
-# downloading them in the order they were created. When the download is
-# successful, the zero-sized file is deleted from the ``queue`` directory.
-# If the download fails, the zero-sized file remains and it'll be retried the
+# downloading them in the order they were created. When the download
+# is
+# successful, the zero-sized file is deleted from the ``queue``
+# directory.
+# If the download fails, the zero-sized file remains and it'll be
+# retried the
 # next time cache-prefetcher runs.
 #
 # Possible values:
@@ -648,16 +768,16 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
 # Reason:
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
-#registry_host = 0.0.0.0
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
+#registry_host = 192.168.10.35
 
 # DEPRECATED:
 # Port the registry server is listening on.
@@ -677,8 +797,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_port = 9191
 
 # DEPRECATED:
@@ -714,8 +834,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_protocol = http
 
 # DEPRECATED:
@@ -743,8 +863,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED:
@@ -773,8 +893,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_cert_file = /etc/ssl/certs/file.crt
 
 # DEPRECATED:
@@ -805,8 +925,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_ca_file = /etc/ssl/cafile/file.ca
 
 # DEPRECATED:
@@ -837,8 +957,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_insecure = false
 
 # DEPRECATED:
@@ -865,204 +985,210 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_timeout = 600
 
-# DEPRECATED: Whether to pass through the user token when making requests to the
-# registry. To prevent failures with token expiration during big files upload,
-# it is recommended to set this parameter to False.If "use_user_token" is not in
-# effect, then admin credentials can be specified. (boolean value)
+# DEPRECATED: Whether to pass through the user token when making
+# requests to the registry. To prevent failures with token expiration
+# during big files upload, it is recommended to set this parameter to
+# False.If "use_user_token" is not in effect, then admin credentials
+# can be specified. (boolean value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #use_user_token = true
 
-# DEPRECATED: The administrators user name. If "use_user_token" is not in
-# effect, then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators user name. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_user = <None>
 
-# DEPRECATED: The administrators password. If "use_user_token" is not in effect,
-# then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators password. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_password = <None>
 
-# DEPRECATED: The tenant name of the administrative user. If "use_user_token" is
-# not in effect, then admin tenant name can be specified. (string value)
+# DEPRECATED: The tenant name of the administrative user. If
+# "use_user_token" is not in effect, then admin tenant name can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_tenant_name = <None>
 
-# DEPRECATED: The URL to the keystone service. If "use_user_token" is not in
-# effect and using keystone auth, then URL of keystone can be specified. (string
-# value)
+# DEPRECATED: The URL to the keystone service. If "use_user_token" is
+# not in effect and using keystone auth, then URL of keystone can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_url = <None>
 
-# DEPRECATED: The strategy to use for authentication. If "use_user_token" is not
-# in effect, then auth strategy can be specified. (string value)
+# DEPRECATED: The strategy to use for authentication. If
+# "use_user_token" is not in effect, then auth strategy can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_strategy = noauth
 
-# DEPRECATED: The region for the authentication service. If "use_user_token" is
-# not in effect and using keystone auth, then region name can be specified.
-# (string value)
+# DEPRECATED: The region for the authentication service. If
+# "use_user_token" is not in effect and using keystone auth, then
+# region name can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_region = <None>
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+log_file = /var/log/glance/image-cache.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-
 [glance_store]
 
 #
 # From glance.store
 #
 
-# DEPRECATED:
+#
 # List of enabled Glance stores.
 #
 # Register the storage backends to use for storing disk images
@@ -1083,18 +1209,9 @@
 #     * default_store
 #
 #  (list value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``enabled_backends`` which helps to configure multiple backend stores
-# of different schemes.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #stores = file,http
 
-# DEPRECATED:
+#
 # The default scheme to use for storing images.
 #
 # Provide a string value representing the default scheme to use for
@@ -1136,18 +1253,9 @@
 # sheepdog - <No description provided>
 # cinder - <No description provided>
 # vsphere - <No description provided>
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``default_backend`` which acts similar to ``default_store`` config
-# option.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #default_store = file
 
-# DEPRECATED:
+#
 # Minimum interval in seconds to execute updating dynamic storage
 # capabilities based on current backend status.
 #
@@ -1162,19 +1270,14 @@
 # By default, this option is set to zero and is disabled. Provide an
 # integer value greater than zero to enable this option.
 #
-# NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
-# /store-capabilities.html
+# NOTE: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-
+# specs/specs/kilo/store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
-# https://docs.openstack.org/glance_store/latest/user/drivers.html
-#
-# NOTE 2: The dynamic store update capability described above is not
-# implemented by any current store drivers.  Thus, this option DOES
-# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
-# for removal early in the Stein development cycle.
+# http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
 # Possible values:
 #     * Zero
@@ -1185,15 +1288,6 @@
 #
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option configures a stub method that has not been implemented
-# for any existing store drivers.  Hence it is non-operational, and
-# giving it a value does absolutely nothing.
-#
-# This option is scheduled for removal early in the Stein development
-# cycle.
 #store_capabilities_update_min_interval = 0
 
 #
@@ -1202,16 +1296,20 @@
 # When the ``cinder_endpoint_template`` is not set and any of
 # ``cinder_store_auth_address``, ``cinder_store_user_name``,
 # ``cinder_store_project_name``, ``cinder_store_password`` is not set,
-# cinder store uses this information to lookup cinder endpoint from the service
-# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# cinder store uses this information to lookup cinder endpoint from
+# the service
+# catalog in the current context. ``cinder_os_region_name``, if set,
+# is taken
 # into consideration to fetch the appropriate endpoint.
 #
-# The service catalog can be listed by the ``openstack catalog list`` command.
+# The service catalog can be listed by the ``openstack catalog list``
+# command.
 #
 # Possible values:
 #     * A string of of the following form:
 #       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       At least ``service_type`` and ``interface`` should be
+# specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -1228,18 +1326,22 @@
 #
 # Override service catalog lookup with template for cinder endpoint.
 #
-# When this option is set, this value is used to generate cinder endpoint,
+# When this option is set, this value is used to generate cinder
+# endpoint,
 # instead of looking up from the service catalog.
 # This value is ignored if ``cinder_store_auth_address``,
 # ``cinder_store_user_name``, ``cinder_store_project_name``, and
 # ``cinder_store_password`` are specified.
 #
-# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
-#
-# Possible values:
-#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+# If this configuration option is set, ``cinder_catalog_info`` will be
+# ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s``
+# is
 #       replaced with the current tenant (project) name.
-#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#       For example:
+# ``http://cinder.openstack.example.org/v2/%%(tenant)s``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1254,10 +1356,14 @@
 #
 # Region name to lookup cinder service from the service catalog.
 #
-# This is used only when ``cinder_catalog_info`` is used for determining the
-# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
-# the specified region. It is useful when multiple regions are listed in the
-# catalog. If this is not set, the endpoint is looked up from every region.
+# This is used only when ``cinder_catalog_info`` is used for
+# determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is
+# filtered to
+# the specified region. It is useful when multiple regions are listed
+# in the
+# catalog. If this is not set, the endpoint is looked up from every
+# region.
 #
 # Possible values:
 #     * A string that is a valid region name.
@@ -1273,9 +1379,10 @@
 # Location of a CA certificates file used for cinder client requests.
 #
 # The specified CA certificates file, if set, is used to verify cinder
-# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
-# ignored.
-# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value
+# is ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the
+# verification.
 #
 # Possible values:
 #     * Path to a ca certificates file
@@ -1289,7 +1396,8 @@
 #
 # Number of cinderclient retries on failed http calls.
 #
-# When a call failed by any errors, cinderclient will retry the call up to the
+# When a call failed by any errors, cinderclient will retry the call
+# up to the
 # specified times after sleeping a few seconds.
 #
 # Possible values:
@@ -1306,11 +1414,16 @@
 # Time period, in seconds, to wait for a cinder volume transition to
 # complete.
 #
-# When the cinder volume is created, deleted, or attached to the glance node to
-# read/write the volume data, the volume's state is changed. For example, the
-# newly created volume status changes from ``creating`` to ``available`` after
-# the creation process is completed. This specifies the maximum time to wait for
-# the status change. If a timeout occurs while waiting, or the status is changed
+# When the cinder volume is created, deleted, or attached to the
+# glance node to
+# read/write the volume data, the volume's state is changed. For
+# example, the
+# newly created volume status changes from ``creating`` to
+# ``available`` after
+# the creation process is completed. This specifies the maximum time
+# to wait for
+# the status change. If a timeout occurs while waiting, or the status
+# is changed
 # to an unexpected value (e.g. `error``), the image creation fails.
 #
 # Possible values:
@@ -1326,8 +1439,10 @@
 #
 # Allow to perform insecure SSL requests to cinder.
 #
-# If this option is set to True, HTTPS endpoint connection is verified using the
-# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+# If this option is set to True, HTTPS endpoint connection is verified
+# using the
+# CA certificates file specified by ``cinder_ca_certificates_file``
+# option.
 #
 # Possible values:
 #     * True
@@ -1342,15 +1457,23 @@
 #
 # The address where the cinder authentication service is listening.
 #
-# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, and ``cinder_store_password`` options are
-# specified, the specified values are always used for the authentication.
-# This is useful to hide the image volumes from users by storing them in a
-# project/tenant specific to the image service. It also enables users to share
-# the image volume among other projects under the control of glance's ACL.
-#
-# If either of these options are not set, the cinder endpoint is looked up
-# from the service catalog, and current context's user and project are used.
+# When all of ``cinder_store_auth_address``,
+# ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options
+# are
+# specified, the specified values are always used for the
+# authentication.
+# This is useful to hide the image volumes from users by storing them
+# in a
+# project/tenant specific to the image service. It also enables users
+# to share
+# the image volume among other projects under the control of glance's
+# ACL.
+#
+# If either of these options are not set, the cinder endpoint is
+# looked up
+# from the service catalog, and current context's user and project are
+# used.
 #
 # Possible values:
 #     * A valid authentication service address, for example:
@@ -1367,7 +1490,8 @@
 #
 # User name to authenticate against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
@@ -1384,11 +1508,13 @@
 #
 # Password for the user authenticating against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
-#     * A valid password for the user specified by ``cinder_store_user_name``
+#     * A valid password for the user specified by
+# ``cinder_store_user_name``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1401,10 +1527,12 @@
 #
 # Project name where the image volume is stored in cinder.
 #
-# If this configuration option is not set, the project in current context is
+# If this configuration option is not set, the project in current
+# context is
 # used.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the project of the current context is used.
 #
 # Possible values:
@@ -1419,11 +1547,15 @@
 #cinder_store_project_name = <None>
 
 #
-# Path to the rootwrap configuration file to use for running commands as root.
-#
-# The cinder store requires root privileges to operate the image volumes (for
-# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
-# The configuration file should allow the required commands by cinder store and
+# Path to the rootwrap configuration file to use for running commands
+# as root.
+#
+# The cinder store requires root privileges to operate the image
+# volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data,
+# etc.).
+# The configuration file should allow the required commands by cinder
+# store and
 # os-brick library.
 #
 # Possible values:
@@ -1438,11 +1570,14 @@
 #
 # Volume type that will be used for volume creation in cinder.
 #
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
+# Some cinder backends can have several volume types to optimize
+# storage usage.
+# Adding this option allows an operator to choose a specific volume
+# type
 # in cinder that can be optimized for images.
 #
-# If this is not set, then the default volume type specified in the cinder
+# If this is not set, then the default volume type specified in the
+# cinder
 # configuration will be used for volume creation.
 #
 # Possible values:
@@ -1497,7 +1632,7 @@
 #
 # More information on configuring filesystem store with multiple store
 # directories can be found at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # NOTE: This directory is used only when filesystem store is used as a
 # storage backend. Either ``filesystem_store_datadir`` or
@@ -1538,8 +1673,10 @@
 #
 # File access permissions for the image files.
 #
-# Set the intended file access permissions for image data. This provides
-# a way to enable other services, e.g. Nova, to consume images directly
+# Set the intended file access permissions for image data. This
+# provides
+# a way to enable other services, e.g. Nova, to consume images
+# directly
 # from the filesystem store. The users running the services that are
 # intended to be given access to could be made a member of the group
 # that owns the files created. Assigning a value less then or equal to
@@ -1548,7 +1685,7 @@
 # digit.
 #
 # For more information, please refer the documentation at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # Possible values:
 #     * A valid file access permission
@@ -1565,8 +1702,10 @@
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
-# Certificate Authority file to verify the remote server certificate. If
-# this option is set, the ``https_insecure`` option will be ignored and
+# Certificate Authority file to verify the remote server certificate.
+# If
+# this option is set, the ``https_insecure`` option will be ignored
+# and
 # the CA file specified will be used to authenticate the server
 # certificate and establish a secure connection to the server.
 #
@@ -1584,8 +1723,10 @@
 #
 # This configuration option takes in a boolean value to determine
 # whether or not to verify the remote server certificate. If set to
-# True, the remote server certificate is not verified. If the option is
-# set to False, then the default CA truststore is used for verification.
+# True, the remote server certificate is not verified. If the option
+# is
+# set to False, then the default CA truststore is used for
+# verification.
 #
 # This option is ignored if ``https_ca_certificates_file`` is set.
 # The remote server certificate will then be verified using the file
@@ -1608,12 +1749,14 @@
 # This configuration option specifies the http/https proxy information
 # that should be used to connect to the remote server. The proxy
 # information should be a key value pair of the scheme and proxy, for
-# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# example, http:10.0.0.1:3128. You can also specify proxies for
+# multiple
 # schemes by separating the key value pairs with a comma, for example,
 # http:10.0.0.1:3128, https:10.0.0.1:1080.
 #
 # Possible values:
-#     * A comma separated list of scheme:proxy pairs as described above
+#     * A comma separated list of scheme:proxy pairs as described
+# above
 #
 # Related options:
 #     * None
@@ -1625,11 +1768,13 @@
 # Size, in megabytes, to chunk RADOS images into.
 #
 # Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
+# Glance images into. The default chunk size is 8 megabytes. For
+# optimal
 # performance, the value should be a power of two.
 #
 # When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
+# for storing Glance images, the images are chunked into objects of
+# the
 # size set using this option. These chunked objects are then stored
 # across the distributed block data store to use for Glance.
 #
@@ -1646,8 +1791,10 @@
 #
 # RADOS pool in which images are stored.
 #
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
+# When RBD is used as the storage backend for storing Glance images,
+# the
+# images are stored by means of logical grouping of the objects
+# (chunks
 # of images) into a ``pool``. Each pool is defined with the number of
 # placement groups it can contain. The default pool that is used is
 # 'images'.
@@ -1667,7 +1814,8 @@
 #
 # RADOS user to authenticate as.
 #
-# This configuration option takes in the RADOS user to authenticate as.
+# This configuration option takes in the RADOS user to authenticate
+# as.
 # This is only needed when RADOS authentication is enabled and is
 # applicable only if the user is using Cephx authentication. If the
 # value for this option is not set by the user or is set to None, a
@@ -1686,9 +1834,11 @@
 #
 # Ceph configuration file path.
 #
-# This configuration option takes in the path to the Ceph configuration
+# This configuration option takes in the path to the Ceph
+# configuration
 # file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
+# or is set to None, librados will locate the default configuration
+# file
 # which is located at /etc/ceph/ceph.conf. If using Cephx
 # authentication, this file should include a reference to the right
 # keyring in a client.<USER> section
@@ -1706,7 +1856,8 @@
 # Timeout value for connecting to Ceph cluster.
 #
 # This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
+# when connecting to the Ceph cluster i.e. it sets the time to wait
+# for
 # glance-api before closing the connection. This prevents glance-api
 # hangups during the connection to RBD. If the value for this option
 # is set to less than or equal to 0, no timeout is set and the default
@@ -1790,7 +1941,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (host address value)
+#  (unknown value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -1798,7 +1949,8 @@
 #
 # This boolean determines whether or not to verify the server
 # certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
+# for a valid SSL certificate when authenticating. If the option is
+# set
 # to False, then the default CA truststore is used for verification.
 #
 # Possible values:
@@ -1814,7 +1966,8 @@
 #
 # Path to the CA bundle file.
 #
-# This configuration option enables the operator to specify the path to
+# This configuration option enables the operator to specify the path
+# to
 # a custom Certificate Authority file for SSL verification when
 # connecting to Swift.
 #
@@ -1870,7 +2023,8 @@
 # the container and object to the configured URL.
 #
 # Possible values:
-#     * String value representing a valid URL path up to a Swift container
+#     * String value representing a valid URL path up to a Swift
+# container
 #
 # Related Options:
 #     * None
@@ -1882,9 +2036,12 @@
 # Endpoint Type of Swift service.
 #
 # This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
+# Swift endpoint. The endpoint type determines the actions the user
+# will
+# be allowed to perform, for instance, reading and writing to the
+# Store.
+# This setting is only used if swift_store_auth_version is greater
+# than
 # 1.
 #
 # Possible values:
@@ -1924,32 +2081,46 @@
 #swift_store_service_type = object-store
 
 #
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
+# Name of single container to store images/name prefix for multiple
+# containers
+#
+# When a single container is being used to store images, this
+# configuration
+# option indicates the container within the Glance account to be used
+# for
+# storing all images. When multiple containers are used to store
+# images, this
 # will be the name prefix for all containers. Usage of single/multiple
 # containers can be controlled using the configuration option
 # ``swift_store_multiple_containers_seed``.
 #
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
+# When using multiple containers, the containers will be named after
+# the value
+# set for this configuration option with the first N chars of the
+# image UUID
 # as the suffix delimited by an underscore (where N is specified by
 # ``swift_store_multiple_containers_seed``).
 #
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
+# Example: if the seed is set to 3 and swift_store_container =
+# ``glance``, then
+# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be
+# placed in
+# the container ``glance_fda``. All dashes in the UUID are included
+# when
+# creating the container name but do not count toward the character
+# limit, so
 # when N=10 the container name would be ``glance_fdae39a1-ba.``
 #
 # Possible values:
-#     * If using single container, this configuration option can be any string
+#     * If using single container, this configuration option can be
+# any string
 #       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
+#     * If using multiple containers, this configuration option can be
+# any
+#       string as long as it satisfies the container naming rules
+# enforced by
+#       Swift. The value of ``swift_store_multiple_containers_seed``
+# should be
 #       taken into account as well.
 #
 # Related options:
@@ -1961,24 +2132,31 @@
 #swift_store_container = glance
 
 #
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
+# The size threshold, in MB, after which Glance will start segmenting
+# image data.
+#
+# Swift has an upper limit on the size of a single uploaded object. By
+# default,
+# this is 5GB. To upload objects bigger than this limit, objects are
+# segmented
+# into multiple smaller objects that are tied together with a manifest
+# file.
 # For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
+# http://docs.openstack.org/developer/swift/overview_large_objects.html
+#
+# This configuration option specifies the size threshold over which
+# the Swift
 # driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
+# Currently, the Swift driver only supports creating Dynamic Large
+# Objects.
+#
+# NOTE: This should be set by taking into account the large object
+# limit
 # enforced by the Swift cluster in consideration.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by the Swift cluster in consideration.
 #
 # Related options:
@@ -1989,20 +2167,26 @@
 #swift_store_large_object_size = 5120
 
 #
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
+# The maximum size, in MB, of the segments when image data is
+# segmented.
+#
+# When image data is segmented to upload images that are larger than
+# the limit
+# enforced by the Swift cluster, image data is broken into segments
+# that are no
 # bigger than the size specified by this configuration option.
 # Refer to ``swift_store_large_object_size`` for more detail.
 #
 # For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
+# ``swift_store_large_object_chunk_size`` is 1GB, an image of size
+# 6.2GB will be
+# segmented into 7 segments where the first six segments will be 1GB
+# in size and
 # the seventh segment will be 0.2GB.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by Swift cluster in consideration.
 #
 # Related options:
@@ -2015,9 +2199,12 @@
 #
 # Create container, if it doesn't already exist, when uploading image.
 #
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
+# At the time of uploading an image, if the corresponding container
+# doesn't
+# exist, it will be created provided this configuration option is set
+# to True.
+# By default, it won't be created. This behavior is applicable for
+# both single
 # and multiple containers mode.
 #
 # Possible values:
@@ -2033,9 +2220,12 @@
 #
 # Store images in tenant's Swift account.
 #
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
+# This enables multi-tenant storage mode which causes Glance images to
+# be stored
+# in tenant specific Swift accounts. If this is disabled, Glance
+# stores all
+# images in its own account. More details multi-tenant store can be
+# found at
 # https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
 #
 # NOTE: If using multi-tenant swift store, please make sure
@@ -2055,18 +2245,26 @@
 #
 # Seed indicating the number of containers to use for storing images.
 #
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
+# When using a single-tenant store, images can be stored in one or
+# more than one
+# containers. When set to 0, all images will be stored in one single
+# container.
+# When set to an integer value between 1 and 32, multiple containers
+# will be
+# used to store images. This configuration option will determine how
+# many
+# containers are created. The total number of containers that will be
+# used is
+# equal to 16^N, so if this config option is set to 2, then 16^2=256
+# containers
 # will be used to store images.
 #
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
+# Please refer to ``swift_store_container`` for more detail on the
+# naming
+# convention. More detail about using multiple containers can be found
+# at
+# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-
+# store-multiple-containers.html
 #
 # NOTE: This is used only when swift_store_multi_tenant is disabled.
 #
@@ -2091,7 +2289,8 @@
 # default value is an empty list.
 #
 # Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
+#     * A comma separated list of strings representing UUIDs of
+# Keystone
 #       projects/tenants
 #
 # Related options:
@@ -2243,30 +2442,34 @@
 #  (string value)
 #default_swift_reference = ref1
 
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
+# DEPRECATED: Version of the authentication service to use. Valid
+# versions are 2 and 3 for keystone and 1 (deprecated) for swauth and
+# rackspace. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
+# The option 'auth_version' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_version = 2
 
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
+# DEPRECATED: The address where the Swift authentication service is
+# listening. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
+# The option 'auth_address' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_address = <None>
 
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
+# DEPRECATED: The user to authenticate against the Swift
+# authentication service. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
+# The option 'user' in the Swift back-end configuration file is set
+# instead.
 #swift_store_user = <None>
 
 # DEPRECATED: Auth key for the user authenticating against the Swift
@@ -2327,227 +2530,57 @@
 #  (string value)
 #swift_upload_buffer_dir = <None>
 
-#
-# Address of the ESX/ESXi or vCenter Server target system.
-#
-# This configuration option sets the address of the ESX/ESXi or vCenter
-# Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
-# a DNS name (www.my-domain.com).
-#
-# Possible Values:
-#     * A valid IPv4 or IPv6 address
-#     * A valid DNS name
-#
-# Related options:
-#     * vmware_server_username
-#     * vmware_server_password
-#
-#  (host address value)
-#vmware_server_host = 127.0.0.1
-
-#
-# Server username.
-#
-# This configuration option takes the username for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is the username for a user with appropriate
-#       privileges
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_password
-#
-#  (string value)
-#vmware_server_username = root
-
-#
-# Server password.
-#
-# This configuration option takes the password for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is a password corresponding to the username
-#       specified using the "vmware_server_username" option
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_username
-#
-#  (string value)
-#vmware_server_password = vmware
-
-#
-# The number of VMware API retries.
-#
-# This configuration option specifies the number of times the VMware
-# ESX/VC server API must be retried upon connection related issues or
-# server API call overload. It is not possible to specify 'retry
-# forever'.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_api_retry_count = 10
-
-#
-# Interval in seconds used for polling remote tasks invoked on VMware
-# ESX/VC server.
-#
-# This configuration option takes in the sleep time in seconds for polling an
-# on-going async task as part of the VMWare ESX/VC server API call.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 1
-#vmware_task_poll_interval = 5
-
-#
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
-# glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
-# is openstack_glance.
-#
-# Possible Values:
-#     * Any string that is a valid path to a directory
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#vmware_store_image_dir = /openstack_glance
-
-#
-# Set verification of the ESX/vCenter server certificate.
-#
-# This configuration option takes a boolean value to determine
-# whether or not to verify the ESX/vCenter server certificate. If this
-# option is set to True, the ESX/vCenter server certificate is not
-# verified. If this option is set to False, then the default CA
-# truststore is used for verification.
-#
-# This option is ignored if the "vmware_ca_file" option is set. In that
-# case, the ESX/vCenter server certificate will then be verified using
-# the file specified using the "vmware_ca_file" option .
-#
-# Possible Values:
-#     * True
-#     * False
-#
-# Related options:
-#     * vmware_ca_file
-#
-#  (boolean value)
-# Deprecated group/name - [glance_store]/vmware_api_insecure
-#vmware_insecure = false
-
-#
-# Absolute path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Cerificate Authority File to verify the ESX/vCenter certificate.
-#
-# If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
-# server certificate and establish a secure connection to the server.
-#
-# Possible Values:
-#     * Any string that is a valid absolute path to a CA file
-#
-# Related options:
-#     * vmware_insecure
-#
-#  (string value)
-#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The datastores where the image can be stored.
-#
-# This configuration option specifies the datastores where the image can
-# be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
-# should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
-# by ":" to specify the priority. Thus, the required format becomes
-# <datacenter_path>:<datastore_name>:<optional_weight>.
-#
-# When adding an image, the datastore with highest weight will be
-# selected, unless there is not enough free space available in cases
-# where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
-# last. If multiple datastores have the same weight, then the one with
-# the most free space available is selected.
-#
-# Possible Values:
-#     * Any string of the format:
-#       <datacenter_path>:<datastore_name>:<optional_weight>
-#
-# Related options:
-#    * None
-#
-#  (multi valued)
-#vmware_datastores =
+
+os_region_name = RegionOne
 
 
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
 #policy_default_rule = default
 
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
 #policy_dirs = policy.d
 
-# Content Type to send and receive data for REST based policy check (string
-# value)
+# Content Type to send and receive data for REST based policy check
+# (string value)
 # Possible values:
 # application/x-www-form-urlencoded - <No description provided>
 # application/json - <No description provided>
 #remote_content_type = application/x-www-form-urlencoded
 
-# server identity verification for REST based policy check (boolean value)
+# server identity verification for REST based policy check (boolean
+# value)
 #remote_ssl_verify_server_crt = false
 
-# Absolute path to ca cert file for REST based policy check (string value)
+# Absolute path to ca cert file for REST based policy check (string
+# value)
 #remote_ssl_ca_crt_file = <None>
 
-# Absolute path to client cert for REST based policy check (string value)
+# Absolute path to client cert for REST based policy check (string
+# value)
 #remote_ssl_client_crt_file = <None>
 
 # Absolute path client key file REST based policy check (string value)
 #remote_ssl_client_key_file = <None>
+

2019-05-09 14:25:33,526 [salt.state       :1951][INFO    ][14082] Completed state [/etc/glance/glance-cache.conf] at time 14:25:33.526036 duration_in_ms=151.87
2019-05-09 14:25:33,527 [salt.state       :1780][INFO    ][14082] Running state [glance_ssl_mysql] at time 14:25:33.527389
2019-05-09 14:25:33,527 [salt.state       :1813][INFO    ][14082] Executing state test.show_notification for [glance_ssl_mysql]
2019-05-09 14:25:33,527 [salt.state       :300 ][INFO    ][14082] Running glance._ssl.mysql
2019-05-09 14:25:33,527 [salt.state       :1951][INFO    ][14082] Completed state [glance_ssl_mysql] at time 14:25:33.527946 duration_in_ms=0.557
2019-05-09 14:25:33,528 [salt.state       :1780][INFO    ][14082] Running state [glance_ssl_rabbitmq] at time 14:25:33.528296
2019-05-09 14:25:33,528 [salt.state       :1813][INFO    ][14082] Executing state test.show_notification for [glance_ssl_rabbitmq]
2019-05-09 14:25:33,528 [salt.state       :300 ][INFO    ][14082] Running glance._ssl.rabbitmq
2019-05-09 14:25:33,528 [salt.state       :1951][INFO    ][14082] Completed state [glance_ssl_rabbitmq] at time 14:25:33.528900 duration_in_ms=0.604
2019-05-09 14:25:33,529 [salt.state       :1780][INFO    ][14082] Running state [/etc/glance/glance-registry.conf] at time 14:25:33.529409
2019-05-09 14:25:33,529 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/glance/glance-registry.conf]
2019-05-09 14:25:33,554 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-registry.conf.Debian'
2019-05-09 14:25:33,650 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2019-05-09 14:25:33,697 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2019-05-09 14:25:33,741 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2019-05-09 14:25:33,800 [salt.state       :300 ][INFO    ][14082] File changed:
--- 
+++ 
@@ -1,16 +1,20 @@
+
 [DEFAULT]
 
 #
 # From glance.registry
 #
 
-# DEPRECATED:
+#
 # Set the image owner to tenant or the authenticated user.
 #
-# Assign a boolean value to determine the owner of an image. When set to
+# Assign a boolean value to determine the owner of an image. When set
+# to
 # True, the owner of the image is the tenant. When set to False, the
-# owner of the image will be the authenticated user issuing the request.
-# Setting it to False makes the image private to the associated user and
+# owner of the image will be the authenticated user issuing the
+# request.
+# Setting it to False makes the image private to the associated user
+# and
 # sharing with other users within the same tenant (or "project")
 # requires explicit image sharing via image membership.
 #
@@ -22,15 +26,6 @@
 #     * None
 #
 #  (boolean value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# The non-default setting for this option misaligns Glance with other
-# OpenStack services with respect to resource ownership.  Further, surveys
-# indicate that this option is not used by operators.  The option will be
-# removed early in the 'S' development cycle following the standard OpenStack
-# deprecation policy.  As the option is not in wide use, no migration path is
-# proposed.
 #owner_is_tenant = true
 
 #
@@ -74,7 +69,8 @@
 #
 # Provide  an integer value to limit the length of the request ID to
 # the specified length. The default value is 64. Users can change this
-# to any ineteger value between 0 and 16384 however keeping in mind that
+# to any ineteger value between 0 and 16384 however keeping in mind
+# that
 # a larger value may flood the logs.
 #
 # Possible values:
@@ -111,44 +107,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -160,10 +123,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -220,7 +185,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -233,8 +199,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -351,9 +317,10 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
 #show_multiple_locations = false
 
 #
@@ -385,18 +352,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -405,6 +379,40 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -418,18 +426,44 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
 
 #
-#                     DEPRECATED FOR REMOVAL
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -463,8 +497,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -482,7 +516,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -569,18 +603,43 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
 
 #
 # IP address to bind the glance servers to.
@@ -599,8 +658,9 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #bind_host = 0.0.0.0
+bind_host = 192.168.10.37
 
 #
 # Port number on which the server will listen.
@@ -620,6 +680,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #bind_port = <None>
+bind_port = 9191
 
 #
 # Set the number of incoming connection requests.
@@ -720,9 +781,9 @@
 #  (string value)
 #key_file = /etc/ssl/key/key-file.pem
 
-# DEPRECATED: The HTTP header used to determine the scheme for the original
-# request, even if it was removed by an SSL terminating proxy. Typical value is
-# "HTTP_X_FORWARDED_PROTO". (string value)
+# DEPRECATED: The HTTP header used to determine the scheme for the
+# original request, even if it was removed by an SSL terminating
+# proxy. Typical value is "HTTP_X_FORWARDED_PROTO". (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Use the http_proxy_to_wsgi middleware instead.
@@ -735,7 +796,8 @@
 # process workers to service requests. By default, the number of CPUs
 # available is set as the value for ``workers`` limited to 8. For
 # example if the processor count is 6, 6 workers will be used, if the
-# processor count is 24 only 8 workers will be used. The limit will only
+# processor count is 24 only 8 workers will be used. The limit will
+# only
 # apply to the default value, if 24 workers is configured, 24 is used.
 #
 # Each worker process is made to listen on the port set in the
@@ -754,6 +816,7 @@
 #  (integer value)
 # Minimum value: 0
 #workers = <None>
+workers = 8
 
 #
 # Maximum line size of message headers.
@@ -823,312 +886,301 @@
 #  (integer value)
 # Minimum value: 0
 #client_socket_timeout = 900
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+log_file = /var/log/glance/registry.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
+[paste_deploy]
+
+#
+# From glance.registry
+#
+
+#
+# Deployment flavor to use in the server application pipeline.
+#
+# Provide a string value representing the appropriate deployment
+# flavor used in the server application pipleline. This is typically
+# the partial name of a pipeline in the paste configuration file with
+# the service name removed.
+#
+# For example, if your paste section name in the paste configuration
+# file is [pipeline:glance-api-keystone], set ``flavor`` to
+# ``keystone``.
+#
+# Possible values:
+#     * String value representing a partial pipeline name.
+#
+# Related Options:
+#     * config_file
+#
+#  (string value)
+flavor = keystone
+
+#
+# Name of the paste configuration file.
+#
+# Provide a string value representing the name of the paste
+# configuration file to use for configuring piplelines for
+# server application deployments.
+#
+# NOTES:
+#     * Provide the name or the path relative to the glance directory
+#       for the paste configuration file and not the absolute path.
+#     * The sample paste configuration file shipped with Glance need
+#       not be edited in most cases as it comes with ready-made
+#       pipelines for all common deployment flavors.
+#
+# If no value is specified for this option, the ``paste.ini`` file
+# with the prefix of the corresponding Glance service's configuration
+# file name will be searched for in the known configuration
+# directories. (For example, if this option is missing from or has no
+# value set in ``glance-api.conf``, the service will look for a file
+# named ``glance-api-paste.ini``.) If the paste configuration file is
+# not found, the service will not start.
+#
+# Possible values:
+#     * A string value representing the name of the paste
+# configuration
+#       file.
+#
+# Related Options:
+#     * flavor
+#
+#  (string value)
+#config_file = glance-api-paste.ini
+
+
+[profiler]
+
+#
+# From glance.registry
+#
+
+#
+# Enables the profiling for all services on this node. Default value
+# is False
+# (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via
+# this project
+# operations. If the profiling is triggered by another project, this
+# project part
+# will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enables SQL requests profiling in services. Default value is False
+# (SQL
+# requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part
+# of the
+# trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only
+# shown on a
+# higher level of operations. Single SQL queries cannot be analyzed
+# this
+# way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance
+# profiling.
+# This string value should have the following format:
+# <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the
+# profiling via
+# the REST API has to set one of these keys in the headers of the REST
+# API call
+# to include profiling results of this node for this particular
+# project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to
+# enable
+# profiling. Also, to generate correct profiling information across
+# all services
+# at least one key needs to be consistent between OpenStack projects.
+# This
+# ensures it can be used from client side to generate the trace,
+# containing
+# information from all possible resources. (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend. Default value is
+# messaging:// which
+# sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * messaging://: use oslo_messaging driver for sending notifications.
+# * mongodb://127.0.0.1:27017 : use mongodb driver for sending
+# notifications.
+# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for
+# sending
+# notifications.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example:
+# es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search
+# will maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter
+# defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example:
+# socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis
+# service.
+# This parameter defines the name (for example:
+# sentinal_service_name=mymaster).
+#  (string value)
+#sentinel_service_name = mymaster
 
 [database]
-connection = sqlite:////var/lib/glance/glance.sqlite
-backend = sqlalchemy
-
 #
 # From oslo.db
 #
@@ -1140,71 +1192,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://glance:opnfv_secret@192.168.10.23/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
 # value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -1214,58 +1270,106 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
 #
 # From oslo.db.concurrency
 #
 
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
 # Deprecated group/name - [DEFAULT]/dbapi_use_tpool
 #use_tpool = false
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -1278,9 +1382,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -1293,8 +1398,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -1318,10 +1423,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -1332,42 +1438,12 @@
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
 
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -1393,11 +1469,11 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
-# value)
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
@@ -1424,891 +1500,126 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[paste_deploy]
-
-#
-# From glance.registry
-#
-
-#
-# Deployment flavor to use in the server application pipeline.
-#
-# Provide a string value representing the appropriate deployment
-# flavor used in the server application pipleline. This is typically
-# the partial name of a pipeline in the paste configuration file with
-# the service name removed.
-#
-# For example, if your paste section name in the paste configuration
-# file is [pipeline:glance-api-keystone], set ``flavor`` to
-# ``keystone``.
-#
-# Possible values:
-#     * String value representing a partial pipeline name.
-#
-# Related Options:
-#     * config_file
-#
-#  (string value)
-#flavor = keystone
-
-#
-# Name of the paste configuration file.
-#
-# Provide a string value representing the name of the paste
-# configuration file to use for configuring piplelines for
-# server application deployments.
-#
-# NOTES:
-#     * Provide the name or the path relative to the glance directory
-#       for the paste configuration file and not the absolute path.
-#     * The sample paste configuration file shipped with Glance need
-#       not be edited in most cases as it comes with ready-made
-#       pipelines for all common deployment flavors.
-#
-# If no value is specified for this option, the ``paste.ini`` file
-# with the prefix of the corresponding Glance service's configuration
-# file name will be searched for in the known configuration
-# directories. (For example, if this option is missing from or has no
-# value set in ``glance-api.conf``, the service will look for a file
-# named ``glance-api-paste.ini``.) If the paste configuration file is
-# not found, the service will not start.
-#
-# Possible values:
-#     * A string value representing the name of the paste configuration
-#       file.
-#
-# Related Options:
-#     * flavor
-#
-#  (string value)
-#config_file = glance-api-paste.ini
-
-
-[profiler]
-
-#
-# From glance.registry
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this
-# project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format: <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
-# spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = glance

2019-05-09 14:25:33,802 [salt.state       :1951][INFO    ][14082] Completed state [/etc/glance/glance-registry.conf] at time 14:25:33.802153 duration_in_ms=272.742
2019-05-09 14:25:33,803 [salt.state       :1780][INFO    ][14082] Running state [/etc/glance/glance-scrubber.conf] at time 14:25:33.803229
2019-05-09 14:25:33,803 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/glance/glance-scrubber.conf]
2019-05-09 14:25:33,830 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-scrubber.conf.Debian'
2019-05-09 14:25:34,004 [salt.state       :300 ][INFO    ][14082] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -28,44 +29,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -77,10 +45,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -137,7 +107,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -150,8 +121,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -268,9 +239,10 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
 #show_multiple_locations = false
 
 #
@@ -302,18 +274,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -322,6 +301,40 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -335,18 +348,44 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
 
 #
-#                     DEPRECATED FOR REMOVAL
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -380,8 +419,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -399,7 +438,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -486,31 +525,63 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
 
 #
 # The amount of time, in seconds, to delay image scrubbing.
 #
-# When delayed delete is turned on, an image is put into ``pending_delete``
-# state upon deletion until the scrubber deletes its image data. Typically, soon
-# after the image is put into ``pending_delete`` state, it is available for
-# scrubbing. However, scrubbing can be delayed until a later point using this
-# configuration option. This option denotes the time period an image spends in
+# When delayed delete is turned on, an image is put into
+# ``pending_delete``
+# state upon deletion until the scrubber deletes its image data.
+# Typically, soon
+# after the image is put into ``pending_delete`` state, it is
+# available for
+# scrubbing. However, scrubbing can be delayed until a later point
+# using this
+# configuration option. This option denotes the time period an image
+# spends in
 # ``pending_delete`` state before it is available for scrubbing.
 #
-# It is important to realize that this has storage implications. The larger the
-# ``scrub_time``, the longer the time to reclaim backend storage from deleted
+# It is important to realize that this has storage implications. The
+# larger the
+# ``scrub_time``, the longer the time to reclaim backend storage from
+# deleted
 # images.
 #
 # Possible values:
@@ -526,11 +597,16 @@
 #
 # The size of thread pool to be used for scrubbing images.
 #
-# When there are a large number of images to scrub, it is beneficial to scrub
-# images in parallel so that the scrub queue stays in control and the backend
-# storage is reclaimed in a timely fashion. This configuration option denotes
-# the maximum number of images to be scrubbed in parallel. The default value is
-# one, which signifies serial scrubbing. Any value above one indicates parallel
+# When there are a large number of images to scrub, it is beneficial
+# to scrub
+# images in parallel so that the scrub queue stays in control and the
+# backend
+# storage is reclaimed in a timely fashion. This configuration option
+# denotes
+# the maximum number of images to be scrubbed in parallel. The default
+# value is
+# one, which signifies serial scrubbing. Any value above one indicates
+# parallel
 # scrubbing.
 #
 # Possible values:
@@ -546,19 +622,28 @@
 #
 # Turn on/off delayed delete.
 #
-# Typically when an image is deleted, the ``glance-api`` service puts the image
-# into ``deleted`` state and deletes its data at the same time. Delayed delete
-# is a feature in Glance that delays the actual deletion of image data until a
+# Typically when an image is deleted, the ``glance-api`` service puts
+# the image
+# into ``deleted`` state and deletes its data at the same time.
+# Delayed delete
+# is a feature in Glance that delays the actual deletion of image data
+# until a
 # later point in time (as determined by the configuration option
 # ``scrub_time``).
-# When delayed delete is turned on, the ``glance-api`` service puts the image
-# into ``pending_delete`` state upon deletion and leaves the image data in the
-# storage backend for the image scrubber to delete at a later time. The image
-# scrubber will move the image into ``deleted`` state upon successful deletion
+# When delayed delete is turned on, the ``glance-api`` service puts
+# the image
+# into ``pending_delete`` state upon deletion and leaves the image
+# data in the
+# storage backend for the image scrubber to delete at a later time.
+# The image
+# scrubber will move the image into ``deleted`` state upon successful
+# deletion
 # of image data.
 #
-# NOTE: When delayed delete is turned on, image scrubber MUST be running as a
-# periodic task to prevent the backend storage from filling up with undesired
+# NOTE: When delayed delete is turned on, image scrubber MUST be
+# running as a
+# periodic task to prevent the backend storage from filling up with
+# undesired
 # usage.
 #
 # Possible values:
@@ -576,13 +661,19 @@
 #
 # Time interval, in seconds, between scrubber runs in daemon mode.
 #
-# Scrubber can be run either as a cron job or daemon. When run as a daemon, this
-# configuration time specifies the time period between two runs. When the
-# scrubber wakes up, it fetches and scrubs all ``pending_delete`` images that
-# are available for scrubbing after taking ``scrub_time`` into consideration.
-#
-# If the wakeup time is set to a large number, there may be a large number of
-# images to be scrubbed for each run. Also, this impacts how quickly the backend
+# Scrubber can be run either as a cron job or daemon. When run as a
+# daemon, this
+# configuration time specifies the time period between two runs. When
+# the
+# scrubber wakes up, it fetches and scrubs all ``pending_delete``
+# images that
+# are available for scrubbing after taking ``scrub_time`` into
+# consideration.
+#
+# If the wakeup time is set to a large number, there may be a large
+# number of
+# images to be scrubbed for each run. Also, this impacts how quickly
+# the backend
 # storage is reclaimed.
 #
 # Possible values:
@@ -594,7 +685,7 @@
 #
 #  (integer value)
 # Minimum value: 0
-#wakeup_time = 300
+wakeup_time = 300
 
 #
 # Run scrubber as a daemon.
@@ -618,266 +709,131 @@
 #
 #  (boolean value)
 #daemon = false
-
-#
-# Restore the image status from 'pending_delete' to 'active'.
-#
-# This option is used by administrator to reset the image's status from
-# 'pending_delete' to 'active' when the image is deleted by mistake and
-# 'pending delete' feature is enabled in Glance. Please make sure the
-# glance-scrubber daemon is stopped before restoring the image to avoid image
-# data inconsistency.
-#
-# Possible values:
-#     * image's uuid
-#
-#  (string value)
-#restore = <None>
-
+daemon = false
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+log_file = /var/log/glance/scrubber.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-
-[database]
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
-
-
 [glance_store]
 
 #
 # From glance.store
 #
 
-# DEPRECATED:
+#
 # List of enabled Glance stores.
 #
 # Register the storage backends to use for storing disk images
@@ -898,18 +854,9 @@
 #     * default_store
 #
 #  (list value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``enabled_backends`` which helps to configure multiple backend stores
-# of different schemes.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #stores = file,http
 
-# DEPRECATED:
+#
 # The default scheme to use for storing images.
 #
 # Provide a string value representing the default scheme to use for
@@ -951,18 +898,9 @@
 # sheepdog - <No description provided>
 # cinder - <No description provided>
 # vsphere - <No description provided>
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``default_backend`` which acts similar to ``default_store`` config
-# option.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #default_store = file
 
-# DEPRECATED:
+#
 # Minimum interval in seconds to execute updating dynamic storage
 # capabilities based on current backend status.
 #
@@ -977,19 +915,14 @@
 # By default, this option is set to zero and is disabled. Provide an
 # integer value greater than zero to enable this option.
 #
-# NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
-# /store-capabilities.html
+# NOTE: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-
+# specs/specs/kilo/store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
-# https://docs.openstack.org/glance_store/latest/user/drivers.html
-#
-# NOTE 2: The dynamic store update capability described above is not
-# implemented by any current store drivers.  Thus, this option DOES
-# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
-# for removal early in the Stein development cycle.
+# http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
 # Possible values:
 #     * Zero
@@ -1000,15 +933,6 @@
 #
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option configures a stub method that has not been implemented
-# for any existing store drivers.  Hence it is non-operational, and
-# giving it a value does absolutely nothing.
-#
-# This option is scheduled for removal early in the Stein development
-# cycle.
 #store_capabilities_update_min_interval = 0
 
 #
@@ -1017,16 +941,20 @@
 # When the ``cinder_endpoint_template`` is not set and any of
 # ``cinder_store_auth_address``, ``cinder_store_user_name``,
 # ``cinder_store_project_name``, ``cinder_store_password`` is not set,
-# cinder store uses this information to lookup cinder endpoint from the service
-# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# cinder store uses this information to lookup cinder endpoint from
+# the service
+# catalog in the current context. ``cinder_os_region_name``, if set,
+# is taken
 # into consideration to fetch the appropriate endpoint.
 #
-# The service catalog can be listed by the ``openstack catalog list`` command.
+# The service catalog can be listed by the ``openstack catalog list``
+# command.
 #
 # Possible values:
 #     * A string of of the following form:
 #       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       At least ``service_type`` and ``interface`` should be
+# specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -1043,18 +971,22 @@
 #
 # Override service catalog lookup with template for cinder endpoint.
 #
-# When this option is set, this value is used to generate cinder endpoint,
+# When this option is set, this value is used to generate cinder
+# endpoint,
 # instead of looking up from the service catalog.
 # This value is ignored if ``cinder_store_auth_address``,
 # ``cinder_store_user_name``, ``cinder_store_project_name``, and
 # ``cinder_store_password`` are specified.
 #
-# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
-#
-# Possible values:
-#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+# If this configuration option is set, ``cinder_catalog_info`` will be
+# ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s``
+# is
 #       replaced with the current tenant (project) name.
-#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#       For example:
+# ``http://cinder.openstack.example.org/v2/%%(tenant)s``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1069,10 +1001,14 @@
 #
 # Region name to lookup cinder service from the service catalog.
 #
-# This is used only when ``cinder_catalog_info`` is used for determining the
-# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
-# the specified region. It is useful when multiple regions are listed in the
-# catalog. If this is not set, the endpoint is looked up from every region.
+# This is used only when ``cinder_catalog_info`` is used for
+# determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is
+# filtered to
+# the specified region. It is useful when multiple regions are listed
+# in the
+# catalog. If this is not set, the endpoint is looked up from every
+# region.
 #
 # Possible values:
 #     * A string that is a valid region name.
@@ -1088,9 +1024,10 @@
 # Location of a CA certificates file used for cinder client requests.
 #
 # The specified CA certificates file, if set, is used to verify cinder
-# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
-# ignored.
-# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value
+# is ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the
+# verification.
 #
 # Possible values:
 #     * Path to a ca certificates file
@@ -1104,7 +1041,8 @@
 #
 # Number of cinderclient retries on failed http calls.
 #
-# When a call failed by any errors, cinderclient will retry the call up to the
+# When a call failed by any errors, cinderclient will retry the call
+# up to the
 # specified times after sleeping a few seconds.
 #
 # Possible values:
@@ -1121,11 +1059,16 @@
 # Time period, in seconds, to wait for a cinder volume transition to
 # complete.
 #
-# When the cinder volume is created, deleted, or attached to the glance node to
-# read/write the volume data, the volume's state is changed. For example, the
-# newly created volume status changes from ``creating`` to ``available`` after
-# the creation process is completed. This specifies the maximum time to wait for
-# the status change. If a timeout occurs while waiting, or the status is changed
+# When the cinder volume is created, deleted, or attached to the
+# glance node to
+# read/write the volume data, the volume's state is changed. For
+# example, the
+# newly created volume status changes from ``creating`` to
+# ``available`` after
+# the creation process is completed. This specifies the maximum time
+# to wait for
+# the status change. If a timeout occurs while waiting, or the status
+# is changed
 # to an unexpected value (e.g. `error``), the image creation fails.
 #
 # Possible values:
@@ -1141,8 +1084,10 @@
 #
 # Allow to perform insecure SSL requests to cinder.
 #
-# If this option is set to True, HTTPS endpoint connection is verified using the
-# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+# If this option is set to True, HTTPS endpoint connection is verified
+# using the
+# CA certificates file specified by ``cinder_ca_certificates_file``
+# option.
 #
 # Possible values:
 #     * True
@@ -1157,15 +1102,23 @@
 #
 # The address where the cinder authentication service is listening.
 #
-# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, and ``cinder_store_password`` options are
-# specified, the specified values are always used for the authentication.
-# This is useful to hide the image volumes from users by storing them in a
-# project/tenant specific to the image service. It also enables users to share
-# the image volume among other projects under the control of glance's ACL.
-#
-# If either of these options are not set, the cinder endpoint is looked up
-# from the service catalog, and current context's user and project are used.
+# When all of ``cinder_store_auth_address``,
+# ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options
+# are
+# specified, the specified values are always used for the
+# authentication.
+# This is useful to hide the image volumes from users by storing them
+# in a
+# project/tenant specific to the image service. It also enables users
+# to share
+# the image volume among other projects under the control of glance's
+# ACL.
+#
+# If either of these options are not set, the cinder endpoint is
+# looked up
+# from the service catalog, and current context's user and project are
+# used.
 #
 # Possible values:
 #     * A valid authentication service address, for example:
@@ -1182,7 +1135,8 @@
 #
 # User name to authenticate against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
@@ -1199,11 +1153,13 @@
 #
 # Password for the user authenticating against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
-#     * A valid password for the user specified by ``cinder_store_user_name``
+#     * A valid password for the user specified by
+# ``cinder_store_user_name``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -1216,10 +1172,12 @@
 #
 # Project name where the image volume is stored in cinder.
 #
-# If this configuration option is not set, the project in current context is
+# If this configuration option is not set, the project in current
+# context is
 # used.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the project of the current context is used.
 #
 # Possible values:
@@ -1234,11 +1192,15 @@
 #cinder_store_project_name = <None>
 
 #
-# Path to the rootwrap configuration file to use for running commands as root.
-#
-# The cinder store requires root privileges to operate the image volumes (for
-# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
-# The configuration file should allow the required commands by cinder store and
+# Path to the rootwrap configuration file to use for running commands
+# as root.
+#
+# The cinder store requires root privileges to operate the image
+# volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data,
+# etc.).
+# The configuration file should allow the required commands by cinder
+# store and
 # os-brick library.
 #
 # Possible values:
@@ -1253,11 +1215,14 @@
 #
 # Volume type that will be used for volume creation in cinder.
 #
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
+# Some cinder backends can have several volume types to optimize
+# storage usage.
+# Adding this option allows an operator to choose a specific volume
+# type
 # in cinder that can be optimized for images.
 #
-# If this is not set, then the default volume type specified in the cinder
+# If this is not set, then the default volume type specified in the
+# cinder
 # configuration will be used for volume creation.
 #
 # Possible values:
@@ -1312,7 +1277,7 @@
 #
 # More information on configuring filesystem store with multiple store
 # directories can be found at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # NOTE: This directory is used only when filesystem store is used as a
 # storage backend. Either ``filesystem_store_datadir`` or
@@ -1353,8 +1318,10 @@
 #
 # File access permissions for the image files.
 #
-# Set the intended file access permissions for image data. This provides
-# a way to enable other services, e.g. Nova, to consume images directly
+# Set the intended file access permissions for image data. This
+# provides
+# a way to enable other services, e.g. Nova, to consume images
+# directly
 # from the filesystem store. The users running the services that are
 # intended to be given access to could be made a member of the group
 # that owns the files created. Assigning a value less then or equal to
@@ -1363,7 +1330,7 @@
 # digit.
 #
 # For more information, please refer the documentation at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # Possible values:
 #     * A valid file access permission
@@ -1380,8 +1347,10 @@
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
-# Certificate Authority file to verify the remote server certificate. If
-# this option is set, the ``https_insecure`` option will be ignored and
+# Certificate Authority file to verify the remote server certificate.
+# If
+# this option is set, the ``https_insecure`` option will be ignored
+# and
 # the CA file specified will be used to authenticate the server
 # certificate and establish a secure connection to the server.
 #
@@ -1399,8 +1368,10 @@
 #
 # This configuration option takes in a boolean value to determine
 # whether or not to verify the remote server certificate. If set to
-# True, the remote server certificate is not verified. If the option is
-# set to False, then the default CA truststore is used for verification.
+# True, the remote server certificate is not verified. If the option
+# is
+# set to False, then the default CA truststore is used for
+# verification.
 #
 # This option is ignored if ``https_ca_certificates_file`` is set.
 # The remote server certificate will then be verified using the file
@@ -1423,12 +1394,14 @@
 # This configuration option specifies the http/https proxy information
 # that should be used to connect to the remote server. The proxy
 # information should be a key value pair of the scheme and proxy, for
-# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# example, http:10.0.0.1:3128. You can also specify proxies for
+# multiple
 # schemes by separating the key value pairs with a comma, for example,
 # http:10.0.0.1:3128, https:10.0.0.1:1080.
 #
 # Possible values:
-#     * A comma separated list of scheme:proxy pairs as described above
+#     * A comma separated list of scheme:proxy pairs as described
+# above
 #
 # Related options:
 #     * None
@@ -1440,11 +1413,13 @@
 # Size, in megabytes, to chunk RADOS images into.
 #
 # Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
+# Glance images into. The default chunk size is 8 megabytes. For
+# optimal
 # performance, the value should be a power of two.
 #
 # When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
+# for storing Glance images, the images are chunked into objects of
+# the
 # size set using this option. These chunked objects are then stored
 # across the distributed block data store to use for Glance.
 #
@@ -1461,8 +1436,10 @@
 #
 # RADOS pool in which images are stored.
 #
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
+# When RBD is used as the storage backend for storing Glance images,
+# the
+# images are stored by means of logical grouping of the objects
+# (chunks
 # of images) into a ``pool``. Each pool is defined with the number of
 # placement groups it can contain. The default pool that is used is
 # 'images'.
@@ -1482,7 +1459,8 @@
 #
 # RADOS user to authenticate as.
 #
-# This configuration option takes in the RADOS user to authenticate as.
+# This configuration option takes in the RADOS user to authenticate
+# as.
 # This is only needed when RADOS authentication is enabled and is
 # applicable only if the user is using Cephx authentication. If the
 # value for this option is not set by the user or is set to None, a
@@ -1501,9 +1479,11 @@
 #
 # Ceph configuration file path.
 #
-# This configuration option takes in the path to the Ceph configuration
+# This configuration option takes in the path to the Ceph
+# configuration
 # file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
+# or is set to None, librados will locate the default configuration
+# file
 # which is located at /etc/ceph/ceph.conf. If using Cephx
 # authentication, this file should include a reference to the right
 # keyring in a client.<USER> section
@@ -1521,7 +1501,8 @@
 # Timeout value for connecting to Ceph cluster.
 #
 # This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
+# when connecting to the Ceph cluster i.e. it sets the time to wait
+# for
 # glance-api before closing the connection. This prevents glance-api
 # hangups during the connection to RBD. If the value for this option
 # is set to less than or equal to 0, no timeout is set and the default
@@ -1605,7 +1586,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (host address value)
+#  (unknown value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -1613,7 +1594,8 @@
 #
 # This boolean determines whether or not to verify the server
 # certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
+# for a valid SSL certificate when authenticating. If the option is
+# set
 # to False, then the default CA truststore is used for verification.
 #
 # Possible values:
@@ -1629,7 +1611,8 @@
 #
 # Path to the CA bundle file.
 #
-# This configuration option enables the operator to specify the path to
+# This configuration option enables the operator to specify the path
+# to
 # a custom Certificate Authority file for SSL verification when
 # connecting to Swift.
 #
@@ -1685,7 +1668,8 @@
 # the container and object to the configured URL.
 #
 # Possible values:
-#     * String value representing a valid URL path up to a Swift container
+#     * String value representing a valid URL path up to a Swift
+# container
 #
 # Related Options:
 #     * None
@@ -1697,9 +1681,12 @@
 # Endpoint Type of Swift service.
 #
 # This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
+# Swift endpoint. The endpoint type determines the actions the user
+# will
+# be allowed to perform, for instance, reading and writing to the
+# Store.
+# This setting is only used if swift_store_auth_version is greater
+# than
 # 1.
 #
 # Possible values:
@@ -1739,32 +1726,46 @@
 #swift_store_service_type = object-store
 
 #
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
+# Name of single container to store images/name prefix for multiple
+# containers
+#
+# When a single container is being used to store images, this
+# configuration
+# option indicates the container within the Glance account to be used
+# for
+# storing all images. When multiple containers are used to store
+# images, this
 # will be the name prefix for all containers. Usage of single/multiple
 # containers can be controlled using the configuration option
 # ``swift_store_multiple_containers_seed``.
 #
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
+# When using multiple containers, the containers will be named after
+# the value
+# set for this configuration option with the first N chars of the
+# image UUID
 # as the suffix delimited by an underscore (where N is specified by
 # ``swift_store_multiple_containers_seed``).
 #
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
+# Example: if the seed is set to 3 and swift_store_container =
+# ``glance``, then
+# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be
+# placed in
+# the container ``glance_fda``. All dashes in the UUID are included
+# when
+# creating the container name but do not count toward the character
+# limit, so
 # when N=10 the container name would be ``glance_fdae39a1-ba.``
 #
 # Possible values:
-#     * If using single container, this configuration option can be any string
+#     * If using single container, this configuration option can be
+# any string
 #       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
+#     * If using multiple containers, this configuration option can be
+# any
+#       string as long as it satisfies the container naming rules
+# enforced by
+#       Swift. The value of ``swift_store_multiple_containers_seed``
+# should be
 #       taken into account as well.
 #
 # Related options:
@@ -1776,24 +1777,31 @@
 #swift_store_container = glance
 
 #
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
+# The size threshold, in MB, after which Glance will start segmenting
+# image data.
+#
+# Swift has an upper limit on the size of a single uploaded object. By
+# default,
+# this is 5GB. To upload objects bigger than this limit, objects are
+# segmented
+# into multiple smaller objects that are tied together with a manifest
+# file.
 # For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
+# http://docs.openstack.org/developer/swift/overview_large_objects.html
+#
+# This configuration option specifies the size threshold over which
+# the Swift
 # driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
+# Currently, the Swift driver only supports creating Dynamic Large
+# Objects.
+#
+# NOTE: This should be set by taking into account the large object
+# limit
 # enforced by the Swift cluster in consideration.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by the Swift cluster in consideration.
 #
 # Related options:
@@ -1804,20 +1812,26 @@
 #swift_store_large_object_size = 5120
 
 #
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
+# The maximum size, in MB, of the segments when image data is
+# segmented.
+#
+# When image data is segmented to upload images that are larger than
+# the limit
+# enforced by the Swift cluster, image data is broken into segments
+# that are no
 # bigger than the size specified by this configuration option.
 # Refer to ``swift_store_large_object_size`` for more detail.
 #
 # For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
+# ``swift_store_large_object_chunk_size`` is 1GB, an image of size
+# 6.2GB will be
+# segmented into 7 segments where the first six segments will be 1GB
+# in size and
 # the seventh segment will be 0.2GB.
 #
 # Possible values:
-#     * A positive integer that is less than or equal to the large object limit
+#     * A positive integer that is less than or equal to the large
+# object limit
 #       enforced by Swift cluster in consideration.
 #
 # Related options:
@@ -1830,9 +1844,12 @@
 #
 # Create container, if it doesn't already exist, when uploading image.
 #
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
+# At the time of uploading an image, if the corresponding container
+# doesn't
+# exist, it will be created provided this configuration option is set
+# to True.
+# By default, it won't be created. This behavior is applicable for
+# both single
 # and multiple containers mode.
 #
 # Possible values:
@@ -1848,9 +1865,12 @@
 #
 # Store images in tenant's Swift account.
 #
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
+# This enables multi-tenant storage mode which causes Glance images to
+# be stored
+# in tenant specific Swift accounts. If this is disabled, Glance
+# stores all
+# images in its own account. More details multi-tenant store can be
+# found at
 # https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
 #
 # NOTE: If using multi-tenant swift store, please make sure
@@ -1870,18 +1890,26 @@
 #
 # Seed indicating the number of containers to use for storing images.
 #
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
+# When using a single-tenant store, images can be stored in one or
+# more than one
+# containers. When set to 0, all images will be stored in one single
+# container.
+# When set to an integer value between 1 and 32, multiple containers
+# will be
+# used to store images. This configuration option will determine how
+# many
+# containers are created. The total number of containers that will be
+# used is
+# equal to 16^N, so if this config option is set to 2, then 16^2=256
+# containers
 # will be used to store images.
 #
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
+# Please refer to ``swift_store_container`` for more detail on the
+# naming
+# convention. More detail about using multiple containers can be found
+# at
+# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-
+# store-multiple-containers.html
 #
 # NOTE: This is used only when swift_store_multi_tenant is disabled.
 #
@@ -1906,7 +1934,8 @@
 # default value is an empty list.
 #
 # Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
+#     * A comma separated list of strings representing UUIDs of
+# Keystone
 #       projects/tenants
 #
 # Related options:
@@ -2058,30 +2087,34 @@
 #  (string value)
 #default_swift_reference = ref1
 
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
+# DEPRECATED: Version of the authentication service to use. Valid
+# versions are 2 and 3 for keystone and 1 (deprecated) for swauth and
+# rackspace. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
+# The option 'auth_version' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_version = 2
 
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
+# DEPRECATED: The address where the Swift authentication service is
+# listening. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
+# The option 'auth_address' in the Swift back-end configuration file
+# is
 # used instead.
 #swift_store_auth_address = <None>
 
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
+# DEPRECATED: The user to authenticate against the Swift
+# authentication service. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
+# The option 'user' in the Swift back-end configuration file is set
+# instead.
 #swift_store_user = <None>
 
 # DEPRECATED: Auth key for the user authenticating against the Swift
@@ -2145,9 +2178,11 @@
 #
 # Address of the ESX/ESXi or vCenter Server target system.
 #
-# This configuration option sets the address of the ESX/ESXi or vCenter
+# This configuration option sets the address of the ESX/ESXi or
+# vCenter
 # Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
+# storage backend. The address can contain an IP address (127.0.0.1)
+# or
 # a DNS name (www.my-domain.com).
 #
 # Possible Values:
@@ -2158,7 +2193,7 @@
 #     * vmware_server_username
 #     * vmware_server_password
 #
-#  (host address value)
+#  (unknown value)
 #vmware_server_host = 127.0.0.1
 
 #
@@ -2219,7 +2254,8 @@
 # Interval in seconds used for polling remote tasks invoked on VMware
 # ESX/VC server.
 #
-# This configuration option takes in the sleep time in seconds for polling an
+# This configuration option takes in the sleep time in seconds for
+# polling an
 # on-going async task as part of the VMWare ESX/VC server API call.
 #
 # Possible Values:
@@ -2233,11 +2269,14 @@
 #vmware_task_poll_interval = 5
 
 #
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
+# The directory where the glance images will be stored in the
+# datastore.
+#
+# This configuration option specifies the path to the directory where
+# the
 # glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
+# is not set,  the default directory where the glance images are
+# stored
 # is openstack_glance.
 #
 # Possible Values:
@@ -2258,7 +2297,8 @@
 # verified. If this option is set to False, then the default CA
 # truststore is used for verification.
 #
-# This option is ignored if the "vmware_ca_file" option is set. In that
+# This option is ignored if the "vmware_ca_file" option is set. In
+# that
 # case, the ESX/vCenter server certificate will then be verified using
 # the file specified using the "vmware_ca_file" option .
 #
@@ -2280,7 +2320,8 @@
 # Cerificate Authority File to verify the ESX/vCenter certificate.
 #
 # If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
+# and the CA file specified will be used to authenticate the
+# ESX/vCenter
 # server certificate and establish a secure connection to the server.
 #
 # Possible Values:
@@ -2295,18 +2336,22 @@
 #
 # The datastores where the image can be stored.
 #
-# This configuration option specifies the datastores where the image can
+# This configuration option specifies the datastores where the image
+# can
 # be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
+# multiple times for specifying multiple datastores. The datastore
+# name
 # should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
+# optional weight may be given after the datastore name, separated
+# again
 # by ":" to specify the priority. Thus, the required format becomes
 # <datacenter_path>:<datastore_name>:<optional_weight>.
 #
 # When adding an image, the datastore with highest weight will be
 # selected, unless there is not enough free space available in cases
 # where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
+# assumed to be zero and the directory will be considered for
+# selection
 # last. If multiple datastores have the same weight, then the one with
 # the most free space available is selected.
 #
@@ -2320,64 +2365,177 @@
 #  (multi valued)
 #vmware_datastores =
 
-
 [oslo_concurrency]
 
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory should
-# only be writable by the user running the processes that need locking. Defaults
-# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
-# path must be set. (string value)
-#lock_path = <None>
-
+[database]
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://glance:opnfv_secret@192.168.10.23/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
+#db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 [oslo_policy]
-
 #
 # From oslo.policy
 #
 
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
 #enforce_scope = false
 
 # The file that defines policies. (string value)
 #policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
 #policy_default_rule = default
 
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
 #policy_dirs = policy.d
 
-# Content Type to send and receive data for REST based policy check (string
-# value)
+# Content Type to send and receive data for REST based policy check
+# (string value)
 # Possible values:
 # application/x-www-form-urlencoded - <No description provided>
 # application/json - <No description provided>
 #remote_content_type = application/x-www-form-urlencoded
 
-# server identity verification for REST based policy check (boolean value)
+# server identity verification for REST based policy check (boolean
+# value)
 #remote_ssl_verify_server_crt = false
 
-# Absolute path to ca cert file for REST based policy check (string value)
+# Absolute path to ca cert file for REST based policy check (string
+# value)
 #remote_ssl_ca_crt_file = <None>
 
-# Absolute path to client cert for REST based policy check (string value)
+# Absolute path to client cert for REST based policy check (string
+# value)
 #remote_ssl_client_crt_file = <None>
 
 # Absolute path client key file REST based policy check (string value)

2019-05-09 14:25:34,005 [salt.state       :1951][INFO    ][14082] Completed state [/etc/glance/glance-scrubber.conf] at time 14:25:34.005276 duration_in_ms=202.047
2019-05-09 14:25:34,005 [salt.state       :1780][INFO    ][14082] Running state [/etc/glance/glance-api.conf] at time 14:25:34.005855
2019-05-09 14:25:34,006 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/glance/glance-api.conf]
2019-05-09 14:25:34,029 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-api.conf.Debian'
2019-05-09 14:25:34,181 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2019-05-09 14:25:34,237 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_amqp.conf'
2019-05-09 14:25:34,256 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2019-05-09 14:25:34,276 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2019-05-09 14:25:34,446 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_cors.conf'
2019-05-09 14:25:34,474 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2019-05-09 14:25:34,492 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/castellan/_barbican.conf'
2019-05-09 14:25:34,550 [salt.state       :300 ][INFO    ][14082] File changed:
--- 
+++ 
@@ -1,16 +1,224 @@
+
+
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
 
 #
 # From glance.api
 #
 
-# DEPRECATED:
+#
 # Set the image owner to tenant or the authenticated user.
 #
-# Assign a boolean value to determine the owner of an image. When set to
+# Assign a boolean value to determine the owner of an image. When set
+# to
 # True, the owner of the image is the tenant. When set to False, the
-# owner of the image will be the authenticated user issuing the request.
-# Setting it to False makes the image private to the associated user and
+# owner of the image will be the authenticated user issuing the
+# request.
+# Setting it to False makes the image private to the associated user
+# and
 # sharing with other users within the same tenant (or "project")
 # requires explicit image sharing via image membership.
 #
@@ -22,15 +230,6 @@
 #     * None
 #
 #  (boolean value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# The non-default setting for this option misaligns Glance with other
-# OpenStack services with respect to resource ownership.  Further, surveys
-# indicate that this option is not used by operators.  The option will be
-# removed early in the 'S' development cycle following the standard OpenStack
-# deprecation policy.  As the option is not in wide use, no migration path is
-# proposed.
 #owner_is_tenant = true
 
 #
@@ -74,7 +273,8 @@
 #
 # Provide  an integer value to limit the length of the request ID to
 # the specified length. The default value is 64. Users can change this
-# to any ineteger value between 0 and 16384 however keeping in mind that
+# to any ineteger value between 0 and 16384 however keeping in mind
+# that
 # a larger value may flood the logs.
 #
 # Possible values:
@@ -132,44 +332,11 @@
 #  (boolean value)
 #allow_additional_image_properties = true
 
-# "
-# Secure hashing algorithm used for computing the 'os_hash_value' property.
-#
-# This option configures the Glance "multihash", which consists of two
-# image properties: the 'os_hash_algo' and the 'os_hash_value'.  The
-# 'os_hash_algo' will be populated by the value of this configuration
-# option, and the 'os_hash_value' will be populated by the hexdigest computed
-# when the algorithm is applied to the uploaded or imported image data.
-#
-# The value must be a valid secure hash algorithm name recognized by the
-# python 'hashlib' library.  You can determine what these are by examining
-# the 'hashlib.algorithms_available' data member of the version of the
-# library being used in your Glance installation.  For interoperability
-# purposes, however, we recommend that you use the set of secure hash
-# names supplied by the 'hashlib.algorithms_guaranteed' data member because
-# those algorithms are guaranteed to be supported by the 'hashlib' library
-# on all platforms.  Thus, any image consumer using 'hashlib' locally should
-# be able to verify the 'os_hash_value' of the image.
-#
-# The default value of 'sha512' is a performant secure hash algorithm.
-#
-# If this option is misconfigured, any attempts to store image data will fail.
-# For that reason, we recommend using the default value.
-#
-# Possible values:
-#     * Any secure hash algorithm name recognized by the Python 'hashlib'
-#       library
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#hashing_algorithm = sha512
-
 #
 # Maximum number of image members per image.
 #
-# This limits the maximum of users an image can be shared with. Any negative
+# This limits the maximum of users an image can be shared with. Any
+# negative
 # value is interpreted as unlimited.
 #
 # Related options:
@@ -181,10 +348,12 @@
 #
 # Maximum number of properties allowed on an image.
 #
-# This enforces an upper limit on the number of additional properties an image
+# This enforces an upper limit on the number of additional properties
+# an image
 # can have. Any negative value is interpreted as unlimited.
 #
-# NOTE: This won't have any impact if additional properties are disabled. Please
+# NOTE: This won't have any impact if additional properties are
+# disabled. Please
 # refer to ``allow_additional_image_properties``.
 #
 # Related options:
@@ -241,7 +410,8 @@
 #
 # Finally, when this configuration option is set to
 # ``glance.db.simple.api``, image catalog data is stored in and read
-# from an in-memory data structure. This is primarily used for testing.
+# from an in-memory data structure. This is primarily used for
+# testing.
 #
 # Related options:
 #     * enable_v2_api
@@ -254,8 +424,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #data_api = glance.db.sqlalchemy.api
 
 #
@@ -284,6 +454,7 @@
 #  (integer value)
 # Minimum value: 1
 #limit_param_default = 25
+limit_param_default = 25
 
 #
 # Maximum number of results that could be returned by a request.
@@ -309,6 +480,7 @@
 #  (integer value)
 # Minimum value: 1
 #api_limit_max = 1000
+api_limit_max = 1000
 
 #
 # Show direct image location when returning an image.
@@ -341,6 +513,7 @@
 #
 #  (boolean value)
 #show_image_direct_url = false
+show_image_direct_url = true
 
 # DEPRECATED:
 # Show all image locations when returning an image.
@@ -372,9 +545,11 @@
 #  (boolean value)
 # This option is deprecated for removal since Newton.
 # Its value may be silently ignored in the future.
-# Reason: This option will be removed in the Pike release or later because the
-# same functionality can be achieved with greater granularity by using policies.
-# Please see the Newton release notes for more information.
+# Reason: This option will be removed in the Pike release or later
+# because the same functionality can be achieved with greater
+# granularity by using policies. Please see the Newton release notes
+# for more information.
+#show_multiple_locations = false
 #show_multiple_locations = false
 
 #
@@ -406,18 +581,25 @@
 #
 # Maximum amount of image storage per tenant.
 #
-# This enforces an upper limit on the cumulative storage consumed by all images
+# This enforces an upper limit on the cumulative storage consumed by
+# all images
 # of a tenant across all stores. This is a per-tenant limit.
 #
-# The default unit for this configuration option is Bytes. However, storage
-# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
-# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
-# TeraBytes respectively. Note that there should not be any space between the
-# value and unit. Value ``0`` signifies no quota enforcement. Negative values
+# The default unit for this configuration option is Bytes. However,
+# storage
+# units can be specified using case-sensitive literals ``B``, ``KB``,
+# ``MB``,
+# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes,
+# GigaBytes and
+# TeraBytes respectively. Note that there should not be any space
+# between the
+# value and unit. Value ``0`` signifies no quota enforcement. Negative
+# values
 # are invalid and result in errors.
 #
 # Possible values:
-#     * A string that is a valid concatenation of a non-negative integer
+#     * A string that is a valid concatenation of a non-negative
+# integer
 #       representing the storage value and an optional string literal
 #       representing storage units as mentioned above.
 #
@@ -426,6 +608,41 @@
 #
 #  (string value)
 #user_storage_quota = 0
+
+#
+# Deploy the v1 OpenStack Images API.
+#
+# When this option is set to ``True``, Glance service will respond to
+# requests on registered endpoints conforming to the v1 OpenStack
+# Images API.
+#
+# NOTES:
+#     * If this option is enabled, then ``enable_v1_registry`` must
+#       also be set to ``True`` to enable mandatory usage of Registry
+#       service with v1 API.
+#
+#     * If this option is disabled, then the ``enable_v1_registry``
+#       option, which is enabled by default, is also recommended
+#       to be disabled.
+#
+#     * This option is separate from ``enable_v2_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v2 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_registry
+#     * enable_v2_api
+#
+#  (boolean value)
+#enable_v1_api = true
+enable_v1_api=False
 
 #
 # Deploy the v2 OpenStack Images API.
@@ -439,18 +656,45 @@
 #       option, which is enabled by default, is also recommended
 #       to be disabled.
 #
+#     * This option is separate from ``enable_v1_api``, both v1 and v2
+#       OpenStack Images API can be deployed independent of each
+#       other.
+#
+#     * If deploying only the v1 Images API, this option, which is
+#       enabled by default, should be disabled.
+#
 # Possible values:
 #     * True
 #     * False
 #
 # Related options:
 #     * enable_v2_registry
+#     * enable_v1_api
 #
 #  (boolean value)
 #enable_v2_api = true
-
-#
-#                     DEPRECATED FOR REMOVAL
+enable_v2_api=True
+
+#
+# Deploy the v1 API Registry service.
+#
+# When this option is set to ``True``, the Registry service
+# will be enabled in Glance for v1 API requests.
+#
+# NOTES:
+#     * Use of Registry is mandatory in v1 API, so this option must
+#       be set to ``True`` if the ``enable_v1_api`` option is enabled.
+#
+#     * If deploying only the v2 OpenStack Images API, this option,
+#       which is enabled by default, should be disabled.
+#
+# Possible values:
+#     * True
+#     * False
+#
+# Related options:
+#     * enable_v1_api
+#
 #  (boolean value)
 #enable_v1_registry = true
 
@@ -484,8 +728,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #enable_v2_registry = true
 
 #
@@ -503,7 +747,7 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #pydev_worker_debug_host = localhost
 
 #
@@ -590,18 +834,43 @@
 #
 # Related options:
 #     * [task]/work_dir
+#     * [DEFAULT]/enable_image_import (*deprecated*)
 #
 #  (string value)
 #node_staging_uri = file:///tmp/staging/
 
+# DEPRECATED:
+# Enables the Image Import workflow introduced in Pike
+#
+# As '[DEFAULT]/node_staging_uri' is required for the Image
+# Import, it's disabled per default in Pike, enabled per
+# default in Queens and removed in Rocky. This allows Glance to
+# operate with previous version configs upon upgrade.
+#
+# Setting this option to False will disable the endpoints related
+# to Image Import Refactoring work.
+#
+# Related options:
+#     * [DEFAULT]/node_staging_uri (boolean value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason:
+# This option is deprecated for removal in Rocky.
+#
+# It was introduced to make sure that the API is not enabled
+# before the '[DEFAULT]/node_staging_uri' is defined and is
+# long term redundant.
+#enable_image_import = true
+
 #
 # List of enabled Image Import Methods
 #
 # Both 'glance-direct' and 'web-download' are enabled by default.
 #
 # Related options:
-#     * [DEFAULT]/node_staging_uri (list value)
-#enabled_import_methods = [glance-direct,web-download]
+#     * [DEFAULT]/node_staging_uri
+#     * [DEFAULT]/enable_image_import (list value)
+#enabled_import_methods = glance-direct,web-download
 
 #
 # Strategy to determine the preference order of image locations.
@@ -632,6 +901,9 @@
 # store_type - <No description provided>
 #location_strategy = location_order
 
+location_strategy = location_order
+
+
 #
 # The location of the property protection file.
 #
@@ -646,7 +918,8 @@
 # protections won't be enforced. If a value is specified and the file
 # is not found, the glance-api service will fail to start.
 # More information on property protections can be found at:
-# https://docs.openstack.org/glance/latest/admin/property-protections.html
+# https://docs.openstack.org/glance/latest/admin/property-
+# protections.html
 #
 # Possible values:
 #     * Empty string
@@ -726,8 +999,9 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 #bind_host = 0.0.0.0
+bind_host = 192.168.10.37
 
 #
 # Port number on which the server will listen.
@@ -747,6 +1021,7 @@
 # Minimum value: 0
 # Maximum value: 65535
 #bind_port = <None>
+bind_port = 9292
 
 #
 # Number of Glance worker processes to start.
@@ -755,7 +1030,8 @@
 # process workers to service requests. By default, the number of CPUs
 # available is set as the value for ``workers`` limited to 8. For
 # example if the processor count is 6, 6 workers will be used, if the
-# processor count is 24 only 8 workers will be used. The limit will only
+# processor count is 24 only 8 workers will be used. The limit will
+# only
 # apply to the default value, if 24 workers is configured, 24 is used.
 #
 # Each worker process is made to listen on the port set in the
@@ -774,6 +1050,7 @@
 #  (integer value)
 # Minimum value: 0
 #workers = <None>
+workers = 8
 
 #
 # Maximum line size of message headers.
@@ -943,21 +1220,25 @@
 #  (string value)
 #key_file = /etc/ssl/key/key-file.pem
 
-# DEPRECATED: The HTTP header used to determine the scheme for the original
-# request, even if it was removed by an SSL terminating proxy. Typical value is
-# "HTTP_X_FORWARDED_PROTO". (string value)
+# DEPRECATED: The HTTP header used to determine the scheme for the
+# original request, even if it was removed by an SSL terminating
+# proxy. Typical value is "HTTP_X_FORWARDED_PROTO". (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Use the http_proxy_to_wsgi middleware instead.
 #secure_proxy_ssl_header = <None>
 
 #
-# The relative path to sqlite file database that will be used for image cache
+# The relative path to sqlite file database that will be used for
+# image cache
 # management.
 #
-# This is a relative path to the sqlite file database that tracks the age and
-# usage statistics of image cache. The path is relative to image cache base
-# directory, specified by the configuration option ``image_cache_dir``.
+# This is a relative path to the sqlite file database that tracks the
+# age and
+# usage statistics of image cache. The path is relative to image cache
+# base
+# directory, specified by the configuration option
+# ``image_cache_dir``.
 #
 # This is a lightweight database with just one table.
 #
@@ -973,23 +1254,33 @@
 #
 # The driver to use for image cache management.
 #
-# This configuration option provides the flexibility to choose between the
-# different image-cache drivers available. An image-cache driver is responsible
-# for providing the essential functions of image-cache like write images to/read
-# images from cache, track age and usage of cached images, provide a list of
-# cached images, fetch size of the cache, queue images for caching and clean up
+# This configuration option provides the flexibility to choose between
+# the
+# different image-cache drivers available. An image-cache driver is
+# responsible
+# for providing the essential functions of image-cache like write
+# images to/read
+# images from cache, track age and usage of cached images, provide a
+# list of
+# cached images, fetch size of the cache, queue images for caching and
+# clean up
 # the cache, etc.
 #
 # The essential functions of a driver are defined in the base class
-# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers (existing
-# and prospective) must implement this interface. Currently available drivers
-# are ``sqlite`` and ``xattr``. These drivers primarily differ in the way they
+# ``glance.image_cache.drivers.base.Driver``. All image-cache drivers
+# (existing
+# and prospective) must implement this interface. Currently available
+# drivers
+# are ``sqlite`` and ``xattr``. These drivers primarily differ in the
+# way they
 # store the information about cached images:
-#     * The ``sqlite`` driver uses a sqlite database (which sits on every glance
+#     * The ``sqlite`` driver uses a sqlite database (which sits on
+# every glance
 #     node locally) to track the usage of cached images.
-#     * The ``xattr`` driver uses the extended attributes of files to store this
-#     information. It also requires a filesystem that sets ``atime`` on the
-# files
+#     * The ``xattr`` driver uses the extended attributes of files to
+# store this
+#     information. It also requires a filesystem that sets ``atime``
+# on the files
 #     when accessed.
 #
 # Possible values:
@@ -1006,21 +1297,32 @@
 #image_cache_driver = sqlite
 
 #
-# The upper limit on cache size, in bytes, after which the cache-pruner cleans
+# The upper limit on cache size, in bytes, after which the cache-
+# pruner cleans
 # up the image cache.
 #
-# NOTE: This is just a threshold for cache-pruner to act upon. It is NOT a
-# hard limit beyond which the image cache would never grow. In fact, depending
-# on how often the cache-pruner runs and how quickly the cache fills, the image
-# cache can far exceed the size specified here very easily. Hence, care must be
-# taken to appropriately schedule the cache-pruner and in setting this limit.
-#
-# Glance caches an image when it is downloaded. Consequently, the size of the
-# image cache grows over time as the number of downloads increases. To keep the
+# NOTE: This is just a threshold for cache-pruner to act upon. It is
+# NOT a
+# hard limit beyond which the image cache would never grow. In fact,
+# depending
+# on how often the cache-pruner runs and how quickly the cache fills,
+# the image
+# cache can far exceed the size specified here very easily. Hence,
+# care must be
+# taken to appropriately schedule the cache-pruner and in setting this
+# limit.
+#
+# Glance caches an image when it is downloaded. Consequently, the size
+# of the
+# image cache grows over time as the number of downloads increases. To
+# keep the
 # cache size from becoming unmanageable, it is recommended to run the
-# cache-pruner as a periodic task. When the cache pruner is kicked off, it
-# compares the current size of image cache and triggers a cleanup if the image
-# cache grew beyond the size specified here. After the cleanup, the size of
+# cache-pruner as a periodic task. When the cache pruner is kicked
+# off, it
+# compares the current size of image cache and triggers a cleanup if
+# the image
+# cache grew beyond the size specified here. After the cleanup, the
+# size of
 # cache is less than or equal to size specified here.
 #
 # Possible values:
@@ -1033,19 +1335,29 @@
 # Minimum value: 0
 #image_cache_max_size = 10737418240
 
-#
-# The amount of time, in seconds, an incomplete image remains in the cache.
-#
-# Incomplete images are images for which download is in progress. Please see the
-# description of configuration option ``image_cache_dir`` for more detail.
-# Sometimes, due to various reasons, it is possible the download may hang and
-# the incompletely downloaded image remains in the ``incomplete`` directory.
-# This configuration option sets a time limit on how long the incomplete images
-# should remain in the ``incomplete`` directory before they are cleaned up.
-# Once an incomplete image spends more time than is specified here, it'll be
+
+#
+# The amount of time, in seconds, an incomplete image remains in the
+# cache.
+#
+# Incomplete images are images for which download is in progress.
+# Please see the
+# description of configuration option ``image_cache_dir`` for more
+# detail.
+# Sometimes, due to various reasons, it is possible the download may
+# hang and
+# the incompletely downloaded image remains in the ``incomplete``
+# directory.
+# This configuration option sets a time limit on how long the
+# incomplete images
+# should remain in the ``incomplete`` directory before they are
+# cleaned up.
+# Once an incomplete image spends more time than is specified here,
+# it'll be
 # removed by cache-cleaner on its next run.
 #
-# It is recommended to run cache-cleaner as a periodic task on the Glance API
+# It is recommended to run cache-cleaner as a periodic task on the
+# Glance API
 # nodes to keep the incomplete images from occupying disk space.
 #
 # Possible values:
@@ -1061,25 +1373,39 @@
 #
 # Base directory for image cache.
 #
-# This is the location where image data is cached and served out of. All cached
-# images are stored directly under this directory. This directory also contains
-# three subdirectories, namely, ``incomplete``, ``invalid`` and ``queue``.
-#
-# The ``incomplete`` subdirectory is the staging area for downloading images. An
-# image is first downloaded to this directory. When the image download is
-# successful it is moved to the base directory. However, if the download fails,
-# the partially downloaded image file is moved to the ``invalid`` subdirectory.
-#
-# The ``queue``subdirectory is used for queuing images for download. This is
-# used primarily by the cache-prefetcher, which can be scheduled as a periodic
-# task like cache-pruner and cache-cleaner, to cache images ahead of their
-# usage.
-# Upon receiving the request to cache an image, Glance touches a file in the
-# ``queue`` directory with the image id as the file name. The cache-prefetcher,
+# This is the location where image data is cached and served out of.
+# All cached
+# images are stored directly under this directory. This directory also
+# contains
+# three subdirectories, namely, ``incomplete``, ``invalid`` and
+# ``queue``.
+#
+# The ``incomplete`` subdirectory is the staging area for downloading
+# images. An
+# image is first downloaded to this directory. When the image download
+# is
+# successful it is moved to the base directory. However, if the
+# download fails,
+# the partially downloaded image file is moved to the ``invalid``
+# subdirectory.
+#
+# The ``queue``subdirectory is used for queuing images for download.
+# This is
+# used primarily by the cache-prefetcher, which can be scheduled as a
+# periodic
+# task like cache-pruner and cache-cleaner, to cache images ahead of
+# their usage.
+# Upon receiving the request to cache an image, Glance touches a file
+# in the
+# ``queue`` directory with the image id as the file name. The cache-
+# prefetcher,
 # when running, polls for the files in ``queue`` directory and starts
-# downloading them in the order they were created. When the download is
-# successful, the zero-sized file is deleted from the ``queue`` directory.
-# If the download fails, the zero-sized file remains and it'll be retried the
+# downloading them in the order they were created. When the download
+# is
+# successful, the zero-sized file is deleted from the ``queue``
+# directory.
+# If the download fails, the zero-sized file remains and it'll be
+# retried the
 # next time cache-prefetcher runs.
 #
 # Possible values:
@@ -1147,16 +1473,17 @@
 # Related options:
 #     * None
 #
-#  (host address value)
+#  (unknown value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
 # Reason:
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_host = 0.0.0.0
+registry_host = 192.168.10.35
 
 # DEPRECATED:
 # Port the registry server is listening on.
@@ -1176,83 +1503,90 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_port = 9191
-
-# DEPRECATED: Whether to pass through the user token when making requests to the
-# registry. To prevent failures with token expiration during big files upload,
-# it is recommended to set this parameter to False.If "use_user_token" is not in
-# effect, then admin credentials can be specified. (boolean value)
+registry_port = 9191
+
+# DEPRECATED: Whether to pass through the user token when making
+# requests to the registry. To prevent failures with token expiration
+# during big files upload, it is recommended to set this parameter to
+# False.If "use_user_token" is not in effect, then admin credentials
+# can be specified. (boolean value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #use_user_token = true
 
-# DEPRECATED: The administrators user name. If "use_user_token" is not in
-# effect, then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators user name. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_user = <None>
 
-# DEPRECATED: The administrators password. If "use_user_token" is not in effect,
-# then admin credentials can be specified. (string value)
+# DEPRECATED: The administrators password. If "use_user_token" is not
+# in effect, then admin credentials can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_password = <None>
 
-# DEPRECATED: The tenant name of the administrative user. If "use_user_token" is
-# not in effect, then admin tenant name can be specified. (string value)
+# DEPRECATED: The tenant name of the administrative user. If
+# "use_user_token" is not in effect, then admin tenant name can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #admin_tenant_name = <None>
 
-# DEPRECATED: The URL to the keystone service. If "use_user_token" is not in
-# effect and using keystone auth, then URL of keystone can be specified. (string
-# value)
+# DEPRECATED: The URL to the keystone service. If "use_user_token" is
+# not in effect and using keystone auth, then URL of keystone can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_url = <None>
 
-# DEPRECATED: The strategy to use for authentication. If "use_user_token" is not
-# in effect, then auth strategy can be specified. (string value)
+# DEPRECATED: The strategy to use for authentication. If
+# "use_user_token" is not in effect, then auth strategy can be
+# specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_strategy = noauth
 
-# DEPRECATED: The region for the authentication service. If "use_user_token" is
-# not in effect and using keystone auth, then region name can be specified.
-# (string value)
+# DEPRECATED: The region for the authentication service. If
+# "use_user_token" is not in effect and using keystone auth, then
+# region name can be specified. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: This option was considered harmful and has been deprecated in M
-# release. It will be removed in O release. For more information read OSSN-0060.
-# Related functionality with uploading big images has been implemented with
-# Keystone trusts support.
+# Reason: This option was considered harmful and has been deprecated
+# in M release. It will be removed in O release. For more information
+# read OSSN-0060. Related functionality with uploading big images has
+# been implemented with Keystone trusts support.
 #auth_region = <None>
+#
+#auth_region = RegionOne
+#
 
 # DEPRECATED:
 # Protocol to use for communication with the registry server.
@@ -1287,8 +1621,9 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
+#registry_client_protocol = http
 #registry_client_protocol = http
 
 # DEPRECATED:
@@ -1316,8 +1651,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_key_file = /etc/ssl/key/key-file.pem
 
 # DEPRECATED:
@@ -1346,8 +1681,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_cert_file = /etc/ssl/certs/file.crt
 
 # DEPRECATED:
@@ -1378,9 +1713,10 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_ca_file = /etc/ssl/cafile/file.ca
+#
 
 # DEPRECATED:
 # Set verification of the registry server certificate.
@@ -1410,8 +1746,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_insecure = false
 
 # DEPRECATED:
@@ -1438,8 +1774,8 @@
 # Glance registry service is deprecated for removal.
 #
 # More information can be found from the spec:
-# http://specs.openstack.org/openstack/glance-specs/specs/queens/approved/glance
-# /deprecate-registry.html
+# http://specs.openstack.org/openstack/glance-
+# specs/specs/queens/approved/glance/deprecate-registry.html
 #registry_client_timeout = 600
 
 #
@@ -1478,15 +1814,22 @@
 #
 # The amount of time, in seconds, to delay image scrubbing.
 #
-# When delayed delete is turned on, an image is put into ``pending_delete``
-# state upon deletion until the scrubber deletes its image data. Typically, soon
-# after the image is put into ``pending_delete`` state, it is available for
-# scrubbing. However, scrubbing can be delayed until a later point using this
-# configuration option. This option denotes the time period an image spends in
+# When delayed delete is turned on, an image is put into
+# ``pending_delete``
+# state upon deletion until the scrubber deletes its image data.
+# Typically, soon
+# after the image is put into ``pending_delete`` state, it is
+# available for
+# scrubbing. However, scrubbing can be delayed until a later point
+# using this
+# configuration option. This option denotes the time period an image
+# spends in
 # ``pending_delete`` state before it is available for scrubbing.
 #
-# It is important to realize that this has storage implications. The larger the
-# ``scrub_time``, the longer the time to reclaim backend storage from deleted
+# It is important to realize that this has storage implications. The
+# larger the
+# ``scrub_time``, the longer the time to reclaim backend storage from
+# deleted
 # images.
 #
 # Possible values:
@@ -1502,11 +1845,16 @@
 #
 # The size of thread pool to be used for scrubbing images.
 #
-# When there are a large number of images to scrub, it is beneficial to scrub
-# images in parallel so that the scrub queue stays in control and the backend
-# storage is reclaimed in a timely fashion. This configuration option denotes
-# the maximum number of images to be scrubbed in parallel. The default value is
-# one, which signifies serial scrubbing. Any value above one indicates parallel
+# When there are a large number of images to scrub, it is beneficial
+# to scrub
+# images in parallel so that the scrub queue stays in control and the
+# backend
+# storage is reclaimed in a timely fashion. This configuration option
+# denotes
+# the maximum number of images to be scrubbed in parallel. The default
+# value is
+# one, which signifies serial scrubbing. Any value above one indicates
+# parallel
 # scrubbing.
 #
 # Possible values:
@@ -1522,19 +1870,28 @@
 #
 # Turn on/off delayed delete.
 #
-# Typically when an image is deleted, the ``glance-api`` service puts the image
-# into ``deleted`` state and deletes its data at the same time. Delayed delete
-# is a feature in Glance that delays the actual deletion of image data until a
+# Typically when an image is deleted, the ``glance-api`` service puts
+# the image
+# into ``deleted`` state and deletes its data at the same time.
+# Delayed delete
+# is a feature in Glance that delays the actual deletion of image data
+# until a
 # later point in time (as determined by the configuration option
 # ``scrub_time``).
-# When delayed delete is turned on, the ``glance-api`` service puts the image
-# into ``pending_delete`` state upon deletion and leaves the image data in the
-# storage backend for the image scrubber to delete at a later time. The image
-# scrubber will move the image into ``deleted`` state upon successful deletion
+# When delayed delete is turned on, the ``glance-api`` service puts
+# the image
+# into ``pending_delete`` state upon deletion and leaves the image
+# data in the
+# storage backend for the image scrubber to delete at a later time.
+# The image
+# scrubber will move the image into ``deleted`` state upon successful
+# deletion
 # of image data.
 #
-# NOTE: When delayed delete is turned on, image scrubber MUST be running as a
-# periodic task to prevent the backend storage from filling up with undesired
+# NOTE: When delayed delete is turned on, image scrubber MUST be
+# running as a
+# periodic task to prevent the backend storage from filling up with
+# undesired
 # usage.
 #
 # Possible values:
@@ -1548,462 +1905,504 @@
 #
 #  (boolean value)
 #delayed_delete = false
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
 # value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
+[image_format]
+
+#
+# From glance.api
+#
+
+# Supported values for the 'container_format' image attribute (list
 # value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
+# Deprecated group/name - [DEFAULT]/container_formats
+#container_formats = ami,ari,aki,bare,ovf,ova,docker
+
+# Supported values for the 'disk_format' image attribute (list value)
+# Deprecated group/name - [DEFAULT]/disk_formats
+#disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop,root-tar
+
+
+[paste_deploy]
+
+#
+# From glance.api
+#
+
+#
+# Deployment flavor to use in the server application pipeline.
+#
+# Provide a string value representing the appropriate deployment
+# flavor used in the server application pipleline. This is typically
+# the partial name of a pipeline in the paste configuration file with
+# the service name removed.
+#
+# For example, if your paste section name in the paste configuration
+# file is [pipeline:glance-api-keystone], set ``flavor`` to
+# ``keystone``.
+#
+# Possible values:
+#     * String value representing a partial pipeline name.
+#
+# Related Options:
+#     * config_file
+#
+#  (string value)
+#flavor = keystone
+flavor = keystone
+
+#
+# Name of the paste configuration file.
+#
+# Provide a string value representing the name of the paste
+# configuration file to use for configuring piplelines for
+# server application deployments.
+#
+# NOTES:
+#     * Provide the name or the path relative to the glance directory
+#       for the paste configuration file and not the absolute path.
+#     * The sample paste configuration file shipped with Glance need
+#       not be edited in most cases as it comes with ready-made
+#       pipelines for all common deployment flavors.
+#
+# If no value is specified for this option, the ``paste.ini`` file
+# with the prefix of the corresponding Glance service's configuration
+# file name will be searched for in the known configuration
+# directories. (For example, if this option is missing from or has no
+# value set in ``glance-api.conf``, the service will look for a file
+# named ``glance-api-paste.ini``.) If the paste configuration file is
+# not found, the service will not start.
+#
+# Possible values:
+#     * A string value representing the name of the paste
+# configuration
+#       file.
+#
+# Related Options:
+#     * flavor
+#
+#  (string value)
+#config_file = glance-api-paste.ini
+
+
+[profiler]
+
+#
+# From glance.api
+#
+
+#
+# Enables the profiling for all services on this node. Default value
+# is False
+# (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via
+# this project
+# operations. If the profiling is triggered by another project, this
+# project part
+# will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enables SQL requests profiling in services. Default value is False
+# (SQL
+# requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part
+# of the
+# trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only
+# shown on a
+# higher level of operations. Single SQL queries cannot be analyzed
+# this
+# way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance
+# profiling.
+# This string value should have the following format:
+# <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the
+# profiling via
+# the REST API has to set one of these keys in the headers of the REST
+# API call
+# to include profiling results of this node for this particular
+# project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to
+# enable
+# profiling. Also, to generate correct profiling information across
+# all services
+# at least one key needs to be consistent between OpenStack projects.
+# This
+# ensures it can be used from client side to generate the trace,
+# containing
+# information from all possible resources. (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend. Default value is
+# messaging:// which
+# sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * messaging://: use oslo_messaging driver for sending notifications.
+# * mongodb://127.0.0.1:27017 : use mongodb driver for sending
+# notifications.
+# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for
+# sending
+# notifications.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example:
+# es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search
+# will maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter
+# defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example:
+# socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis
+# service.
+# This parameter defines the name (for example:
+# sentinal_service_name=mymaster).
+#  (string value)
+#sentinel_service_name = mymaster
+
+
+[store_type_location_strategy]
+
+#
+# From glance.api
+#
+
+#
+# Preference order of storage backends.
+#
+# Provide a comma separated list of store names in the order in
+# which images should be retrieved from storage backends.
+# These store names must be registered with the ``stores``
+# configuration option.
+#
+# NOTE: The ``store_type_preference`` configuration option is applied
+# only if ``store_type`` is chosen as a value for the
+# ``location_strategy`` configuration option. An empty list will not
+# change the location order.
+#
+# Possible values:
+#     * Empty list
+#     * Comma separated list of registered store names. Legal values
+# are:
+#         * file
+#         * http
+#         * rbd
+#         * swift
+#         * sheepdog
+#         * cinder
+#         * vmware
+#
+# Related options:
+#     * location_strategy
+#     * stores
+#
+#  (list value)
+#store_type_preference =
+
+
+[task]
+
+#
+# From glance.api
+#
+
+# Time in hours for which a task lives after, either succeeding or
+# failing (integer value)
+# Deprecated group/name - [DEFAULT]/task_time_to_live
+#task_time_to_live = 48
+
+#
+# Task executor to be used to run task scripts.
+#
+# Provide a string value representing the executor to use for task
+# executions. By default, ``TaskFlow`` executor is used.
+#
+# ``TaskFlow`` helps make task executions easy, consistent, scalable
+# and reliable. It also enables creation of lightweight task objects
+# and/or functions that are combined together into flows in a
+# declarative manner.
+#
+# Possible values:
+#     * taskflow
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#task_executor = taskflow
+
+#
+# Absolute path to the work directory to use for asynchronous
+# task operations.
+#
+# The directory set here will be used to operate over images -
+# normally before they are imported in the destination store.
+#
+# NOTE: When providing a value for ``work_dir``, please make sure
+# that enough space is provided for concurrent tasks to run
+# efficiently without running out of space.
+#
+# A rough estimation can be done by multiplying the number of
+# ``max_workers`` with an average image size (e.g 500MB). The image
+# size estimation should be done based on the average size in your
+# deployment. Note that depending on the tasks running you may need
+# to multiply this number by some factor depending on what the task
+# does. For example, you may want to double the available size if
+# image conversion is enabled. All this being said, remember these
+# are just estimations and you should do them based on the worst
+# case scenario and be prepared to act in case they were wrong.
+#
+# Possible values:
+#     * String value representing the absolute path to the working
+#       directory
+#
+# Related Options:
+#     * None
+#
+#  (string value)
+#work_dir = /work_dir
+
+
+[taskflow_executor]
+
+#
+# From glance.api
+#
+
+#
+# Set the taskflow engine mode.
+#
+# Provide a string type value to set the mode in which the taskflow
+# engine would schedule tasks to the workers on the hosts. Based on
+# this mode, the engine executes tasks either in single or multiple
+# threads. The possible values for this configuration option are:
+# ``serial`` and ``parallel``. When set to ``serial``, the engine runs
+# all the tasks in a single thread which results in serial execution
+# of tasks. Setting this to ``parallel`` makes the engine run tasks in
+# multiple threads. This results in parallel execution of tasks.
+#
+# Possible values:
+#     * serial
+#     * parallel
+#
+# Related options:
+#     * max_workers
+#
+#  (string value)
+# Possible values:
+# serial - <No description provided>
+# parallel - <No description provided>
+#engine_mode = parallel
+
+#
+# Set the number of engine executable tasks.
+#
+# Provide an integer value to limit the number of workers that can be
+# instantiated on the hosts. In other words, this number defines the
+# number of parallel tasks that can be executed at the same time by
+# the taskflow engine. This value can be greater than one when the
+# engine mode is set to parallel.
+#
+# Possible values:
+#     * Integer value greater than or equal to 1
+#
+# Related options:
+#     * engine_mode
+#
+#  (integer value)
 # Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Image-Meta-Checksum,X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request. (list
-# value)
-#allow_headers = Content-MD5,X-Image-Meta-Checksum,X-Storage-Token,Accept-Encoding,X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
-
-
-[database]
-connection = sqlite:////var/lib/glance/glance.sqlite
-backend = sqlalchemy
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
-
+# Deprecated group/name - [task]/eventlet_executor_pool_size
+#max_workers = 10
+
+#
+# Set the desired image conversion format.
+#
+# Provide a valid image format to which you want images to be
+# converted before they are stored for consumption by Glance.
+# Appropriate image format conversions are desirable for specific
+# storage backends in order to facilitate efficient handling of
+# bandwidth and usage of the storage infrastructure.
+#
+# By default, ``conversion_format`` is not set and must be set
+# explicitly in the configuration file.
+#
+# The allowed values for this option are ``raw``, ``qcow2`` and
+# ``vmdk``. The  ``raw`` format is the unstructured disk format and
+# should be chosen when RBD or Ceph storage backends are used for
+# image storage. ``qcow2`` is supported by the QEMU emulator that
+# expands dynamically and supports Copy on Write. The ``vmdk`` is
+# another common disk format supported by many common virtual machine
+# monitors like VMWare Workstation.
+#
+# Possible values:
+#     * qcow2
+#     * raw
+#     * vmdk
+#
+# Related options:
+#     * disk_formats
+#
+#  (string value)
+# Possible values:
+# qcow2 - <No description provided>
+# raw - <No description provided>
+# vmdk - <No description provided>
+#conversion_format = raw
 
 [glance_store]
 
@@ -2011,7 +2410,7 @@
 # From glance.store
 #
 
-# DEPRECATED:
+#
 # List of enabled Glance stores.
 #
 # Register the storage backends to use for storing disk images
@@ -2032,18 +2431,9 @@
 #     * default_store
 #
 #  (list value)
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``enabled_backends`` which helps to configure multiple backend stores
-# of different schemes.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #stores = file,http
 
-# DEPRECATED:
+#
 # The default scheme to use for storing images.
 #
 # Provide a string value representing the default scheme to use for
@@ -2085,18 +2475,11 @@
 # sheepdog - <No description provided>
 # cinder - <No description provided>
 # vsphere - <No description provided>
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option is deprecated against new config option
-# ``default_backend`` which acts similar to ``default_store`` config
-# option.
-#
-# This option is scheduled for removal in the Stein development
-# cycle.
 #default_store = file
-
-# DEPRECATED:
+default_store = file
+stores = file,http
+
+#
 # Minimum interval in seconds to execute updating dynamic storage
 # capabilities based on current backend status.
 #
@@ -2111,19 +2494,14 @@
 # By default, this option is set to zero and is disabled. Provide an
 # integer value greater than zero to enable this option.
 #
-# NOTE 1: For more information on store capabilities and their updates,
-# please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo
-# /store-capabilities.html
+# NOTE: For more information on store capabilities and their updates,
+# please visit: https://specs.openstack.org/openstack/glance-
+# specs/specs/kilo/store-capabilities.html
 #
 # For more information on setting up a particular store in your
 # deployment and help with the usage of this feature, please contact
 # the storage driver maintainers listed here:
-# https://docs.openstack.org/glance_store/latest/user/drivers.html
-#
-# NOTE 2: The dynamic store update capability described above is not
-# implemented by any current store drivers.  Thus, this option DOES
-# NOT DO ANYTHING (and it never has).  It is DEPRECATED and scheduled
-# for removal early in the Stein development cycle.
+# http://docs.openstack.org/developer/glance_store/drivers/index.html
 #
 # Possible values:
 #     * Zero
@@ -2134,15 +2512,6 @@
 #
 #  (integer value)
 # Minimum value: 0
-# This option is deprecated for removal since Rocky.
-# Its value may be silently ignored in the future.
-# Reason:
-# This option configures a stub method that has not been implemented
-# for any existing store drivers.  Hence it is non-operational, and
-# giving it a value does absolutely nothing.
-#
-# This option is scheduled for removal early in the Stein development
-# cycle.
 #store_capabilities_update_min_interval = 0
 
 #
@@ -2151,16 +2520,20 @@
 # When the ``cinder_endpoint_template`` is not set and any of
 # ``cinder_store_auth_address``, ``cinder_store_user_name``,
 # ``cinder_store_project_name``, ``cinder_store_password`` is not set,
-# cinder store uses this information to lookup cinder endpoint from the service
-# catalog in the current context. ``cinder_os_region_name``, if set, is taken
+# cinder store uses this information to lookup cinder endpoint from
+# the service
+# catalog in the current context. ``cinder_os_region_name``, if set,
+# is taken
 # into consideration to fetch the appropriate endpoint.
 #
-# The service catalog can be listed by the ``openstack catalog list`` command.
+# The service catalog can be listed by the ``openstack catalog list``
+# command.
 #
 # Possible values:
 #     * A string of of the following form:
 #       ``<service_type>:<service_name>:<interface>``
-#       At least ``service_type`` and ``interface`` should be specified.
+#       At least ``service_type`` and ``interface`` should be
+# specified.
 #       ``service_name`` can be omitted.
 #
 # Related options:
@@ -2173,22 +2546,27 @@
 #
 #  (string value)
 #cinder_catalog_info = volumev2::publicURL
+cinder_catalog_info = volumev2::internalURL
 
 #
 # Override service catalog lookup with template for cinder endpoint.
 #
-# When this option is set, this value is used to generate cinder endpoint,
+# When this option is set, this value is used to generate cinder
+# endpoint,
 # instead of looking up from the service catalog.
 # This value is ignored if ``cinder_store_auth_address``,
 # ``cinder_store_user_name``, ``cinder_store_project_name``, and
 # ``cinder_store_password`` are specified.
 #
-# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
-#
-# Possible values:
-#     * URL template string for cinder endpoint, where ``%%(tenant)s`` is
+# If this configuration option is set, ``cinder_catalog_info`` will be
+# ignored.
+#
+# Possible values:
+#     * URL template string for cinder endpoint, where ``%%(tenant)s``
+# is
 #       replaced with the current tenant (project) name.
-#       For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
+#       For example:
+# ``http://cinder.openstack.example.org/v2/%%(tenant)s``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -2203,10 +2581,14 @@
 #
 # Region name to lookup cinder service from the service catalog.
 #
-# This is used only when ``cinder_catalog_info`` is used for determining the
-# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
-# the specified region. It is useful when multiple regions are listed in the
-# catalog. If this is not set, the endpoint is looked up from every region.
+# This is used only when ``cinder_catalog_info`` is used for
+# determining the
+# endpoint. If set, the lookup for cinder endpoint by this node is
+# filtered to
+# the specified region. It is useful when multiple regions are listed
+# in the
+# catalog. If this is not set, the endpoint is looked up from every
+# region.
 #
 # Possible values:
 #     * A string that is a valid region name.
@@ -2218,13 +2600,17 @@
 # Deprecated group/name - [glance_store]/os_region_name
 #cinder_os_region_name = <None>
 
+cinder_os_region_name = RegionOne
+
+
 #
 # Location of a CA certificates file used for cinder client requests.
 #
 # The specified CA certificates file, if set, is used to verify cinder
-# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
-# ignored.
-# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
+# connections via HTTPS endpoint. If the endpoint is HTTP, this value
+# is ignored.
+# ``cinder_api_insecure`` must be set to ``True`` to enable the
+# verification.
 #
 # Possible values:
 #     * Path to a ca certificates file
@@ -2238,7 +2624,8 @@
 #
 # Number of cinderclient retries on failed http calls.
 #
-# When a call failed by any errors, cinderclient will retry the call up to the
+# When a call failed by any errors, cinderclient will retry the call
+# up to the
 # specified times after sleeping a few seconds.
 #
 # Possible values:
@@ -2255,11 +2642,16 @@
 # Time period, in seconds, to wait for a cinder volume transition to
 # complete.
 #
-# When the cinder volume is created, deleted, or attached to the glance node to
-# read/write the volume data, the volume's state is changed. For example, the
-# newly created volume status changes from ``creating`` to ``available`` after
-# the creation process is completed. This specifies the maximum time to wait for
-# the status change. If a timeout occurs while waiting, or the status is changed
+# When the cinder volume is created, deleted, or attached to the
+# glance node to
+# read/write the volume data, the volume's state is changed. For
+# example, the
+# newly created volume status changes from ``creating`` to
+# ``available`` after
+# the creation process is completed. This specifies the maximum time
+# to wait for
+# the status change. If a timeout occurs while waiting, or the status
+# is changed
 # to an unexpected value (e.g. `error``), the image creation fails.
 #
 # Possible values:
@@ -2275,8 +2667,10 @@
 #
 # Allow to perform insecure SSL requests to cinder.
 #
-# If this option is set to True, HTTPS endpoint connection is verified using the
-# CA certificates file specified by ``cinder_ca_certificates_file`` option.
+# If this option is set to True, HTTPS endpoint connection is verified
+# using the
+# CA certificates file specified by ``cinder_ca_certificates_file``
+# option.
 #
 # Possible values:
 #     * True
@@ -2291,15 +2685,23 @@
 #
 # The address where the cinder authentication service is listening.
 #
-# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
-# ``cinder_store_project_name``, and ``cinder_store_password`` options are
-# specified, the specified values are always used for the authentication.
-# This is useful to hide the image volumes from users by storing them in a
-# project/tenant specific to the image service. It also enables users to share
-# the image volume among other projects under the control of glance's ACL.
-#
-# If either of these options are not set, the cinder endpoint is looked up
-# from the service catalog, and current context's user and project are used.
+# When all of ``cinder_store_auth_address``,
+# ``cinder_store_user_name``,
+# ``cinder_store_project_name``, and ``cinder_store_password`` options
+# are
+# specified, the specified values are always used for the
+# authentication.
+# This is useful to hide the image volumes from users by storing them
+# in a
+# project/tenant specific to the image service. It also enables users
+# to share
+# the image volume among other projects under the control of glance's
+# ACL.
+#
+# If either of these options are not set, the cinder endpoint is
+# looked up
+# from the service catalog, and current context's user and project are
+# used.
 #
 # Possible values:
 #     * A valid authentication service address, for example:
@@ -2316,7 +2718,8 @@
 #
 # User name to authenticate against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
@@ -2333,11 +2736,13 @@
 #
 # Password for the user authenticating against cinder.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the user of the current context is used.
 #
 # Possible values:
-#     * A valid password for the user specified by ``cinder_store_user_name``
+#     * A valid password for the user specified by
+# ``cinder_store_user_name``
 #
 # Related options:
 #     * cinder_store_auth_address
@@ -2350,10 +2755,12 @@
 #
 # Project name where the image volume is stored in cinder.
 #
-# If this configuration option is not set, the project in current context is
+# If this configuration option is not set, the project in current
+# context is
 # used.
 #
-# This must be used with all the following related options. If any of these are
+# This must be used with all the following related options. If any of
+# these are
 # not specified, the project of the current context is used.
 #
 # Possible values:
@@ -2368,11 +2775,15 @@
 #cinder_store_project_name = <None>
 
 #
-# Path to the rootwrap configuration file to use for running commands as root.
-#
-# The cinder store requires root privileges to operate the image volumes (for
-# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
-# The configuration file should allow the required commands by cinder store and
+# Path to the rootwrap configuration file to use for running commands
+# as root.
+#
+# The cinder store requires root privileges to operate the image
+# volumes (for
+# connecting to iSCSI/FC volumes and reading/writing the volume data,
+# etc.).
+# The configuration file should allow the required commands by cinder
+# store and
 # os-brick library.
 #
 # Possible values:
@@ -2387,11 +2798,14 @@
 #
 # Volume type that will be used for volume creation in cinder.
 #
-# Some cinder backends can have several volume types to optimize storage usage.
-# Adding this option allows an operator to choose a specific volume type
+# Some cinder backends can have several volume types to optimize
+# storage usage.
+# Adding this option allows an operator to choose a specific volume
+# type
 # in cinder that can be optimized for images.
 #
-# If this is not set, then the default volume type specified in the cinder
+# If this is not set, then the default volume type specified in the
+# cinder
 # configuration will be used for volume creation.
 #
 # Possible values:
@@ -2428,6 +2842,7 @@
 #
 #  (string value)
 #filesystem_store_datadir = /var/lib/glance/images
+filesystem_store_datadir = /var/lib/glance/images/
 
 #
 # List of directories and their priorities to which the filesystem
@@ -2446,7 +2861,7 @@
 #
 # More information on configuring filesystem store with multiple store
 # directories can be found at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # NOTE: This directory is used only when filesystem store is used as a
 # storage backend. Either ``filesystem_store_datadir`` or
@@ -2487,8 +2902,10 @@
 #
 # File access permissions for the image files.
 #
-# Set the intended file access permissions for image data. This provides
-# a way to enable other services, e.g. Nova, to consume images directly
+# Set the intended file access permissions for image data. This
+# provides
+# a way to enable other services, e.g. Nova, to consume images
+# directly
 # from the filesystem store. The users running the services that are
 # intended to be given access to could be made a member of the group
 # that owns the files created. Assigning a value less then or equal to
@@ -2497,7 +2914,7 @@
 # digit.
 #
 # For more information, please refer the documentation at
-# https://docs.openstack.org/glance/latest/configuration/configuring.html
+# http://docs.openstack.org/developer/glance/configuring.html
 #
 # Possible values:
 #     * A valid file access permission
@@ -2514,8 +2931,10 @@
 # Path to the CA bundle file.
 #
 # This configuration option enables the operator to use a custom
-# Certificate Authority file to verify the remote server certificate. If
-# this option is set, the ``https_insecure`` option will be ignored and
+# Certificate Authority file to verify the remote server certificate.
+# If
+# this option is set, the ``https_insecure`` option will be ignored
+# and
 # the CA file specified will be used to authenticate the server
 # certificate and establish a secure connection to the server.
 #
@@ -2533,8 +2952,10 @@
 #
 # This configuration option takes in a boolean value to determine
 # whether or not to verify the remote server certificate. If set to
-# True, the remote server certificate is not verified. If the option is
-# set to False, then the default CA truststore is used for verification.
+# True, the remote server certificate is not verified. If the option
+# is
+# set to False, then the default CA truststore is used for
+# verification.
 #
 # This option is ignored if ``https_ca_certificates_file`` is set.
 # The remote server certificate will then be verified using the file
@@ -2557,12 +2978,14 @@
 # This configuration option specifies the http/https proxy information
 # that should be used to connect to the remote server. The proxy
 # information should be a key value pair of the scheme and proxy, for
-# example, http:10.0.0.1:3128. You can also specify proxies for multiple
+# example, http:10.0.0.1:3128. You can also specify proxies for
+# multiple
 # schemes by separating the key value pairs with a comma, for example,
 # http:10.0.0.1:3128, https:10.0.0.1:1080.
 #
 # Possible values:
-#     * A comma separated list of scheme:proxy pairs as described above
+#     * A comma separated list of scheme:proxy pairs as described
+# above
 #
 # Related options:
 #     * None
@@ -2574,11 +2997,13 @@
 # Size, in megabytes, to chunk RADOS images into.
 #
 # Provide an integer value representing the size in megabytes to chunk
-# Glance images into. The default chunk size is 8 megabytes. For optimal
+# Glance images into. The default chunk size is 8 megabytes. For
+# optimal
 # performance, the value should be a power of two.
 #
 # When Ceph's RBD object storage system is used as the storage backend
-# for storing Glance images, the images are chunked into objects of the
+# for storing Glance images, the images are chunked into objects of
+# the
 # size set using this option. These chunked objects are then stored
 # across the distributed block data store to use for Glance.
 #
@@ -2591,84 +3016,6 @@
 #  (integer value)
 # Minimum value: 1
 #rbd_store_chunk_size = 8
-
-#
-# RADOS pool in which images are stored.
-#
-# When RBD is used as the storage backend for storing Glance images, the
-# images are stored by means of logical grouping of the objects (chunks
-# of images) into a ``pool``. Each pool is defined with the number of
-# placement groups it can contain. The default pool that is used is
-# 'images'.
-#
-# More information on the RBD storage backend can be found here:
-# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
-#
-# Possible Values:
-#     * A valid pool name
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#rbd_store_pool = images
-
-#
-# RADOS user to authenticate as.
-#
-# This configuration option takes in the RADOS user to authenticate as.
-# This is only needed when RADOS authentication is enabled and is
-# applicable only if the user is using Cephx authentication. If the
-# value for this option is not set by the user or is set to None, a
-# default value will be chosen, which will be based on the client.
-# section in rbd_store_ceph_conf.
-#
-# Possible Values:
-#     * A valid RADOS user
-#
-# Related options:
-#     * rbd_store_ceph_conf
-#
-#  (string value)
-#rbd_store_user = <None>
-
-#
-# Ceph configuration file path.
-#
-# This configuration option takes in the path to the Ceph configuration
-# file to be used. If the value for this option is not set by the user
-# or is set to None, librados will locate the default configuration file
-# which is located at /etc/ceph/ceph.conf. If using Cephx
-# authentication, this file should include a reference to the right
-# keyring in a client.<USER> section
-#
-# Possible Values:
-#     * A valid path to a configuration file
-#
-# Related options:
-#     * rbd_store_user
-#
-#  (string value)
-#rbd_store_ceph_conf = /etc/ceph/ceph.conf
-
-#
-# Timeout value for connecting to Ceph cluster.
-#
-# This configuration option takes in the timeout value in seconds used
-# when connecting to the Ceph cluster i.e. it sets the time to wait for
-# glance-api before closing the connection. This prevents glance-api
-# hangups during the connection to RBD. If the value for this option
-# is set to less than or equal to 0, no timeout is set and the default
-# librados value is used.
-#
-# Possible Values:
-#     * Any integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
-#rados_connect_timeout = 0
 
 #
 # Chunk size for images to be stored in Sheepdog data store.
@@ -2739,7 +3086,7 @@
 # Related Options:
 #     * sheepdog_store_port
 #
-#  (host address value)
+#  (unknown value)
 #sheepdog_store_address = 127.0.0.1
 
 #
@@ -2747,7 +3094,8 @@
 #
 # This boolean determines whether or not to verify the server
 # certificate. If this option is set to True, swiftclient won't check
-# for a valid SSL certificate when authenticating. If the option is set
+# for a valid SSL certificate when authenticating. If the option is
+# set
 # to False, then the default CA truststore is used for verification.
 #
 # Possible values:
@@ -2759,497 +3107,6 @@
 #
 #  (boolean value)
 #swift_store_auth_insecure = false
-
-#
-# Path to the CA bundle file.
-#
-# This configuration option enables the operator to specify the path to
-# a custom Certificate Authority file for SSL verification when
-# connecting to Swift.
-#
-# Possible values:
-#     * A valid path to a CA file
-#
-# Related options:
-#     * swift_store_auth_insecure
-#
-#  (string value)
-#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The region of Swift endpoint to use by Glance.
-#
-# Provide a string value representing a Swift region where Glance
-# can connect to for image storage. By default, there is no region
-# set.
-#
-# When Glance uses Swift as the storage backend to store images
-# for a specific tenant that has multiple endpoints, setting of a
-# Swift region with ``swift_store_region`` allows Glance to connect
-# to Swift in the specified region as opposed to a single region
-# connectivity.
-#
-# This option can be configured for both single-tenant and
-# multi-tenant storage.
-#
-# NOTE: Setting the region with ``swift_store_region`` is
-# tenant-specific and is necessary ``only if`` the tenant has
-# multiple endpoints across different regions.
-#
-# Possible values:
-#     * A string value representing a valid Swift region.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_region = RegionTwo
-
-#
-# The URL endpoint to use for Swift backend storage.
-#
-# Provide a string value representing the URL endpoint to use for
-# storing Glance images in Swift store. By default, an endpoint
-# is not set and the storage URL returned by ``auth`` is used.
-# Setting an endpoint with ``swift_store_endpoint`` overrides the
-# storage URL and is used for Glance image storage.
-#
-# NOTE: The URL should include the path up to, but excluding the
-# container. The location of an object is obtained by appending
-# the container and object to the configured URL.
-#
-# Possible values:
-#     * String value representing a valid URL path up to a Swift container
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
-
-#
-# Endpoint Type of Swift service.
-#
-# This string value indicates the endpoint type to use to fetch the
-# Swift endpoint. The endpoint type determines the actions the user will
-# be allowed to perform, for instance, reading and writing to the Store.
-# This setting is only used if swift_store_auth_version is greater than
-# 1.
-#
-# Possible values:
-#     * publicURL
-#     * adminURL
-#     * internalURL
-#
-# Related options:
-#     * swift_store_endpoint
-#
-#  (string value)
-# Possible values:
-# publicURL - <No description provided>
-# adminURL - <No description provided>
-# internalURL - <No description provided>
-#swift_store_endpoint_type = publicURL
-
-#
-# Type of Swift service to use.
-#
-# Provide a string value representing the service type to use for
-# storing images while using Swift backend storage. The default
-# service type is set to ``object-store``.
-#
-# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
-# this configuration option needs to be ``object-store``. If using
-# a higher version of Keystone or a different auth scheme, this
-# option may be modified.
-#
-# Possible values:
-#     * A string representing a valid service type for Swift storage.
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#swift_store_service_type = object-store
-
-#
-# Name of single container to store images/name prefix for multiple containers
-#
-# When a single container is being used to store images, this configuration
-# option indicates the container within the Glance account to be used for
-# storing all images. When multiple containers are used to store images, this
-# will be the name prefix for all containers. Usage of single/multiple
-# containers can be controlled using the configuration option
-# ``swift_store_multiple_containers_seed``.
-#
-# When using multiple containers, the containers will be named after the value
-# set for this configuration option with the first N chars of the image UUID
-# as the suffix delimited by an underscore (where N is specified by
-# ``swift_store_multiple_containers_seed``).
-#
-# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
-# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
-# the container ``glance_fda``. All dashes in the UUID are included when
-# creating the container name but do not count toward the character limit, so
-# when N=10 the container name would be ``glance_fdae39a1-ba.``
-#
-# Possible values:
-#     * If using single container, this configuration option can be any string
-#       that is a valid swift container name in Glance's Swift account
-#     * If using multiple containers, this configuration option can be any
-#       string as long as it satisfies the container naming rules enforced by
-#       Swift. The value of ``swift_store_multiple_containers_seed`` should be
-#       taken into account as well.
-#
-# Related options:
-#     * ``swift_store_multiple_containers_seed``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (string value)
-#swift_store_container = glance
-
-#
-# The size threshold, in MB, after which Glance will start segmenting image
-# data.
-#
-# Swift has an upper limit on the size of a single uploaded object. By default,
-# this is 5GB. To upload objects bigger than this limit, objects are segmented
-# into multiple smaller objects that are tied together with a manifest file.
-# For more detail, refer to
-# https://docs.openstack.org/swift/latest/overview_large_objects.html
-#
-# This configuration option specifies the size threshold over which the Swift
-# driver will start segmenting image data into multiple smaller files.
-# Currently, the Swift driver only supports creating Dynamic Large Objects.
-#
-# NOTE: This should be set by taking into account the large object limit
-# enforced by the Swift cluster in consideration.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by the Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_chunk_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_size = 5120
-
-#
-# The maximum size, in MB, of the segments when image data is segmented.
-#
-# When image data is segmented to upload images that are larger than the limit
-# enforced by the Swift cluster, image data is broken into segments that are no
-# bigger than the size specified by this configuration option.
-# Refer to ``swift_store_large_object_size`` for more detail.
-#
-# For example: if ``swift_store_large_object_size`` is 5GB and
-# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
-# segmented into 7 segments where the first six segments will be 1GB in size and
-# the seventh segment will be 0.2GB.
-#
-# Possible values:
-#     * A positive integer that is less than or equal to the large object limit
-#       enforced by Swift cluster in consideration.
-#
-# Related options:
-#     * ``swift_store_large_object_size``
-#
-#  (integer value)
-# Minimum value: 1
-#swift_store_large_object_chunk_size = 200
-
-#
-# Create container, if it doesn't already exist, when uploading image.
-#
-# At the time of uploading an image, if the corresponding container doesn't
-# exist, it will be created provided this configuration option is set to True.
-# By default, it won't be created. This behavior is applicable for both single
-# and multiple containers mode.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * None
-#
-#  (boolean value)
-#swift_store_create_container_on_put = false
-
-#
-# Store images in tenant's Swift account.
-#
-# This enables multi-tenant storage mode which causes Glance images to be stored
-# in tenant specific Swift accounts. If this is disabled, Glance stores all
-# images in its own account. More details multi-tenant store can be found at
-# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
-#
-# NOTE: If using multi-tenant swift store, please make sure
-# that you do not set a swift configuration file with the
-# 'swift_store_config_file' option.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_config_file
-#
-#  (boolean value)
-#swift_store_multi_tenant = false
-
-#
-# Seed indicating the number of containers to use for storing images.
-#
-# When using a single-tenant store, images can be stored in one or more than one
-# containers. When set to 0, all images will be stored in one single container.
-# When set to an integer value between 1 and 32, multiple containers will be
-# used to store images. This configuration option will determine how many
-# containers are created. The total number of containers that will be used is
-# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
-# will be used to store images.
-#
-# Please refer to ``swift_store_container`` for more detail on the naming
-# convention. More detail about using multiple containers can be found at
-# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
-# multiple-containers.html
-#
-# NOTE: This is used only when swift_store_multi_tenant is disabled.
-#
-# Possible values:
-#     * A non-negative integer less than or equal to 32
-#
-# Related options:
-#     * ``swift_store_container``
-#     * ``swift_store_multi_tenant``
-#     * ``swift_store_create_container_on_put``
-#
-#  (integer value)
-# Minimum value: 0
-# Maximum value: 32
-#swift_store_multiple_containers_seed = 0
-
-#
-# List of tenants that will be granted admin access.
-#
-# This is a list of tenants that will be granted read/write access on
-# all Swift containers created by Glance in multi-tenant mode. The
-# default value is an empty list.
-#
-# Possible values:
-#     * A comma separated list of strings representing UUIDs of Keystone
-#       projects/tenants
-#
-# Related options:
-#     * None
-#
-#  (list value)
-#swift_store_admin_tenants =
-
-#
-# SSL layer compression for HTTPS Swift requests.
-#
-# Provide a boolean value to determine whether or not to compress
-# HTTPS Swift requests for images at the SSL layer. By default,
-# compression is enabled.
-#
-# When using Swift as the backend store for Glance image storage,
-# SSL layer compression of HTTPS Swift requests can be set using
-# this option. If set to False, SSL layer compression of HTTPS
-# Swift requests is disabled. Disabling this option may improve
-# performance for images which are already in a compressed format,
-# for example, qcow2.
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related Options:
-#     * None
-#
-#  (boolean value)
-#swift_store_ssl_compression = true
-
-#
-# The number of times a Swift download will be retried before the
-# request fails.
-#
-# Provide an integer value representing the number of times an image
-# download must be retried before erroring out. The default value is
-# zero (no retry on a failed image download). When set to a positive
-# integer value, ``swift_store_retry_get_count`` ensures that the
-# download is attempted this many more times upon a download failure
-# before sending an error message.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_retry_get_count = 0
-
-#
-# Time in seconds defining the size of the window in which a new
-# token may be requested before the current token is due to expire.
-#
-# Typically, the Swift storage driver fetches a new token upon the
-# expiration of the current token to ensure continued access to
-# Swift. However, some Swift transactions (like uploading image
-# segments) may not recover well if the token expires on the fly.
-#
-# Hence, by fetching a new token before the current token expiration,
-# we make sure that the token does not expire or is close to expiry
-# before a transaction is attempted. By default, the Swift storage
-# driver requests for a new token 60 seconds or less before the
-# current token expiration.
-#
-# Possible values:
-#     * Zero
-#     * Positive integer value
-#
-# Related Options:
-#     * None
-#
-#  (integer value)
-# Minimum value: 0
-#swift_store_expire_soon_interval = 60
-
-#
-# Use trusts for multi-tenant Swift store.
-#
-# This option instructs the Swift store to create a trust for each
-# add/get request when the multi-tenant store is in use. Using trusts
-# allows the Swift store to avoid problems that can be caused by an
-# authentication token expiring during the upload or download of data.
-#
-# By default, ``swift_store_use_trusts`` is set to ``True``(use of
-# trusts is enabled). If set to ``False``, a user token is used for
-# the Swift connection instead, eliminating the overhead of trust
-# creation.
-#
-# NOTE: This option is considered only when
-# ``swift_store_multi_tenant`` is set to ``True``
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (boolean value)
-#swift_store_use_trusts = true
-
-#
-# Buffer image segments before upload to Swift.
-#
-# Provide a boolean value to indicate whether or not Glance should
-# buffer image data to disk while uploading to swift. This enables
-# Glance to resume uploads on error.
-#
-# NOTES:
-# When enabling this option, one should take great care as this
-# increases disk usage on the API node. Be aware that depending
-# upon how the file system is configured, the disk space used
-# for buffering may decrease the actual disk space available for
-# the glance image cache.  Disk utilization will cap according to
-# the following equation:
-# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
-#
-# Possible values:
-#     * True
-#     * False
-#
-# Related options:
-#     * swift_upload_buffer_dir
-#
-#  (boolean value)
-#swift_buffer_on_upload = false
-
-#
-# Reference to default Swift account/backing store parameters.
-#
-# Provide a string value representing a reference to the default set
-# of parameters required for using swift account/backing store for
-# image storage. The default reference value for this configuration
-# option is 'ref1'. This configuration option dereferences the
-# parameters and facilitates image storage in Swift storage backend
-# every time a new image is added.
-#
-# Possible values:
-#     * A valid string value
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#default_swift_reference = ref1
-
-# DEPRECATED: Version of the authentication service to use. Valid versions are 2
-# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_version' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_version = 2
-
-# DEPRECATED: The address where the Swift authentication service is listening.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'auth_address' in the Swift back-end configuration file is
-# used instead.
-#swift_store_auth_address = <None>
-
-# DEPRECATED: The user to authenticate against the Swift authentication service.
-# (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'user' in the Swift back-end configuration file is set instead.
-#swift_store_user = <None>
-
-# DEPRECATED: Auth key for the user authenticating against the Swift
-# authentication service. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason:
-# The option 'key' in the Swift back-end configuration file is used
-# to set the authentication key instead.
-#swift_store_key = <None>
-
-#
-# Absolute path to the file containing the swift account(s)
-# configurations.
-#
-# Include a string value representing the path to a configuration
-# file that has references for each of the configured Swift
-# account(s)/backing stores. By default, no file path is specified
-# and customized Swift referencing is disabled. Configuring this
-# option is highly recommended while using Swift storage backend for
-# image storage as it avoids storage of credentials in the database.
-#
-# NOTE: Please do not configure this option if you have set
-# ``swift_store_multi_tenant`` to ``True``.
-#
-# Possible values:
-#     * String value representing an absolute path on the glance-api
-#       node
-#
-# Related options:
-#     * swift_store_multi_tenant
-#
-#  (string value)
-#swift_store_config_file = <None>
 
 #
 # Directory to buffer image segments before upload to Swift.
@@ -3276,215 +3133,699 @@
 #  (string value)
 #swift_upload_buffer_dir = <None>
 
-#
-# Address of the ESX/ESXi or vCenter Server target system.
-#
-# This configuration option sets the address of the ESX/ESXi or vCenter
-# Server target system. This option is required when using the VMware
-# storage backend. The address can contain an IP address (127.0.0.1) or
-# a DNS name (www.my-domain.com).
-#
-# Possible Values:
-#     * A valid IPv4 or IPv6 address
-#     * A valid DNS name
-#
-# Related options:
-#     * vmware_server_username
-#     * vmware_server_password
-#
-#  (host address value)
-#vmware_server_host = 127.0.0.1
-
-#
-# Server username.
-#
-# This configuration option takes the username for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is the username for a user with appropriate
-#       privileges
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_password
-#
-#  (string value)
-#vmware_server_username = root
-
-#
-# Server password.
-#
-# This configuration option takes the password for authenticating with
-# the VMware ESX/ESXi or vCenter Server. This option is required when
-# using the VMware storage backend.
-#
-# Possible Values:
-#     * Any string that is a password corresponding to the username
-#       specified using the "vmware_server_username" option
-#
-# Related options:
-#     * vmware_server_host
-#     * vmware_server_username
-#
-#  (string value)
-#vmware_server_password = vmware
-
-#
-# The number of VMware API retries.
-#
-# This configuration option specifies the number of times the VMware
-# ESX/VC server API must be retried upon connection related issues or
-# server API call overload. It is not possible to specify 'retry
-# forever'.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
+[oslo_concurrency]
+
+[matchmaker_redis]
+
+[oslo_messaging_amqp]
+#
+# From oslo.messaging
+#
+
+# Name for the AMQP container. must be globally unique. Defaults to a
+# generated UUID (string value)
+#container_name = <None>
+
+# Timeout for inactive connections (in seconds) (integer value)
+#idle_timeout = 0
+
+# Debug: dump AMQP frames to stdout (boolean value)
+#trace = false
+
+# Attempt to connect via SSL. If no other ssl-related parameters are
+# given, it will use the system's CA-bundle to verify the server's
+# certificate. (boolean value)
+#ssl = false
+
+# CA certificate PEM file used to verify the server's certificate
+# (string value)
+#ssl_ca_file =
+
+# Self-identifying certificate PEM file for client authentication
+# (string value)
+#ssl_cert_file =
+
+# Private key PEM file used to sign ssl_cert_file certificate
+# (optional) (string value)
+#ssl_key_file =
+
+# Password for decrypting ssl_key_file (if encrypted) (string value)
+#ssl_key_password = <None>
+
+# By default SSL checks that the name in the server's certificate
+# matches the hostname in the transport_url. In some configurations it
+# may be preferable to use the virtual hostname instead, for example
+# if the server uses the Server Name Indication TLS extension
+# (rfc6066) to provide a certificate per virtual host. Set
+# ssl_verify_vhost to True if the server's SSL certificate uses the
+# virtual host name instead of the DNS name. (boolean value)
+#ssl_verify_vhost = false
+
+# DEPRECATED: Accept clients using either SSL or plain TCP (boolean
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Not applicable - not a SSL server
+#allow_insecure_clients = false
+
+# Space separated list of acceptable SASL mechanisms (string value)
+#sasl_mechanisms =
+
+# Path to directory that contains the SASL configuration (string
+# value)
+#sasl_config_dir =
+
+# Name of configuration file (without .conf suffix) (string value)
+#sasl_config_name =
+
+# SASL realm to use if no realm present in username (string value)
+#sasl_default_realm =
+
+# DEPRECATED: User name for message broker authentication (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# username.
+#username =
+
+# DEPRECATED: Password for message broker authentication (string
+# value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Should use configuration option transport_url to provide the
+# password.
+#password =
+
+# Seconds to pause before attempting to re-connect. (integer value)
 # Minimum value: 1
-#vmware_api_retry_count = 10
-
-#
-# Interval in seconds used for polling remote tasks invoked on VMware
-# ESX/VC server.
-#
-# This configuration option takes in the sleep time in seconds for polling an
-# on-going async task as part of the VMWare ESX/VC server API call.
-#
-# Possible Values:
-#     * Any positive integer value
-#
-# Related options:
-#     * None
-#
-#  (integer value)
+#connection_retry_interval = 1
+
+# Increase the connection_retry_interval by this many seconds after
+# each unsuccessful failover attempt. (integer value)
+# Minimum value: 0
+#connection_retry_backoff = 2
+
+# Maximum limit for connection_retry_interval +
+# connection_retry_backoff (integer value)
 # Minimum value: 1
-#vmware_task_poll_interval = 5
-
-#
-# The directory where the glance images will be stored in the datastore.
-#
-# This configuration option specifies the path to the directory where the
-# glance images will be stored in the VMware datastore. If this option
-# is not set,  the default directory where the glance images are stored
-# is openstack_glance.
-#
-# Possible Values:
-#     * Any string that is a valid path to a directory
-#
-# Related options:
-#     * None
-#
-#  (string value)
-#vmware_store_image_dir = /openstack_glance
-
-#
-# Set verification of the ESX/vCenter server certificate.
-#
-# This configuration option takes a boolean value to determine
-# whether or not to verify the ESX/vCenter server certificate. If this
-# option is set to True, the ESX/vCenter server certificate is not
-# verified. If this option is set to False, then the default CA
-# truststore is used for verification.
-#
-# This option is ignored if the "vmware_ca_file" option is set. In that
-# case, the ESX/vCenter server certificate will then be verified using
-# the file specified using the "vmware_ca_file" option .
-#
-# Possible Values:
-#     * True
-#     * False
-#
-# Related options:
-#     * vmware_ca_file
-#
-#  (boolean value)
-# Deprecated group/name - [glance_store]/vmware_api_insecure
-#vmware_insecure = false
-
-#
-# Absolute path to the CA bundle file.
-#
-# This configuration option enables the operator to use a custom
-# Cerificate Authority File to verify the ESX/vCenter certificate.
-#
-# If this option is set, the "vmware_insecure" option will be ignored
-# and the CA file specified will be used to authenticate the ESX/vCenter
-# server certificate and establish a secure connection to the server.
-#
-# Possible Values:
-#     * Any string that is a valid absolute path to a CA file
-#
-# Related options:
-#     * vmware_insecure
-#
-#  (string value)
-#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
-
-#
-# The datastores where the image can be stored.
-#
-# This configuration option specifies the datastores where the image can
-# be stored in the VMWare store backend. This option may be specified
-# multiple times for specifying multiple datastores. The datastore name
-# should be specified after its datacenter path, separated by ":". An
-# optional weight may be given after the datastore name, separated again
-# by ":" to specify the priority. Thus, the required format becomes
-# <datacenter_path>:<datastore_name>:<optional_weight>.
-#
-# When adding an image, the datastore with highest weight will be
-# selected, unless there is not enough free space available in cases
-# where the image size is already known. If no weight is given, it is
-# assumed to be zero and the directory will be considered for selection
-# last. If multiple datastores have the same weight, then the one with
-# the most free space available is selected.
-#
-# Possible Values:
-#     * Any string of the format:
-#       <datacenter_path>:<datastore_name>:<optional_weight>
-#
-# Related options:
-#    * None
-#
+#connection_retry_interval_max = 30
+
+# Time to pause between re-connecting an AMQP 1.0 link that failed due
+# to a recoverable error. (integer value)
+# Minimum value: 1
+#link_retry_delay = 10
+
+# The maximum number of attempts to re-send a reply message which
+# failed due to a recoverable error. (integer value)
+# Minimum value: -1
+#default_reply_retry = 0
+
+# The deadline for an rpc reply message delivery. (integer value)
+# Minimum value: 5
+#default_reply_timeout = 30
+
+# The deadline for an rpc cast or call message delivery. Only used
+# when caller does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_send_timeout = 30
+
+# The deadline for a sent notification message delivery. Only used
+# when caller does not provide a timeout expiry. (integer value)
+# Minimum value: 5
+#default_notify_timeout = 30
+
+# The duration to schedule a purge of idle sender links. Detach link
+# after expiry. (integer value)
+# Minimum value: 1
+#default_sender_link_timeout = 600
+
+# Indicates the addressing mode used by the driver.
+# Permitted values:
+# 'legacy'   - use legacy non-routable addressing
+# 'routable' - use routable addresses
+# 'dynamic'  - use legacy addresses if the message bus does not
+# support routing otherwise use routable addressing (string value)
+#addressing_mode = dynamic
+
+# Enable virtual host support for those message buses that do not
+# natively support virtual hosting (such as qpidd). When set to true
+# the virtual host name will be added to all message bus addresses,
+# effectively creating a private 'subnet' per virtual host. Set to
+# False if the message bus supports virtual hosting using the
+# 'hostname' field in the AMQP 1.0 Open performative as the name of
+# the virtual host. (boolean value)
+#pseudo_vhost = true
+
+# address prefix used when sending to a specific server (string value)
+#server_request_prefix = exclusive
+
+# address prefix used when broadcasting to all servers (string value)
+#broadcast_prefix = broadcast
+
+# address prefix when sending to any server in group (string value)
+#group_request_prefix = unicast
+
+# Address prefix for all generated RPC addresses (string value)
+#rpc_address_prefix = openstack.org/om/rpc
+
+# Address prefix for all generated Notification addresses (string
+# value)
+#notify_address_prefix = openstack.org/om/notify
+
+# Appended to the address prefix when sending a fanout message. Used
+# by the message bus to identify fanout messages. (string value)
+#multicast_address = multicast
+
+# Appended to the address prefix when sending to a particular
+# RPC/Notification server. Used by the message bus to identify
+# messages sent to a single destination. (string value)
+#unicast_address = unicast
+
+# Appended to the address prefix when sending to a group of consumers.
+# Used by the message bus to identify messages that should be
+# delivered in a round-robin fashion across consumers. (string value)
+#anycast_address = anycast
+
+# Exchange name used in notification addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_notification_exchange if set
+# else control_exchange if set
+# else 'notify' (string value)
+#default_notification_exchange = <None>
+default_notification_exchange = glance
+
+# Exchange name used in RPC addresses.
+# Exchange name resolution precedence:
+# Target.exchange if set
+# else default_rpc_exchange if set
+# else control_exchange if set
+# else 'rpc' (string value)
+#default_rpc_exchange = <None>
+
+# Window size for incoming RPC Reply messages. (integer value)
+# Minimum value: 1
+#reply_link_credit = 200
+
+# Window size for incoming RPC Request messages (integer value)
+# Minimum value: 1
+#rpc_server_credit = 100
+
+# Window size for incoming Notification messages (integer value)
+# Minimum value: 1
+#notify_server_credit = 100
+
+# Send messages of this type pre-settled.
+# Pre-settled messages will not receive acknowledgement
+# from the peer. Note well: pre-settled messages may be
+# silently discarded if the delivery fails.
+# Permitted values:
+# 'rpc-call' - send RPC Calls pre-settled
+# 'rpc-reply'- send RPC Replies pre-settled
+# 'rpc-cast' - Send RPC Casts pre-settled
+# 'notify'   - Send Notifications pre-settled
 #  (multi valued)
-#vmware_datastores =
-
-
-[image_format]
-
-#
-# From glance.api
-#
-
-# Supported values for the 'container_format' image attribute (list value)
-# Deprecated group/name - [DEFAULT]/container_formats
-#container_formats = ami,ari,aki,bare,ovf,ova,docker
-
-# Supported values for the 'disk_format' image attribute (list value)
-# Deprecated group/name - [DEFAULT]/disk_formats
-#disk_formats = ami,ari,aki,vhd,vhdx,vmdk,raw,qcow2,vdi,iso,ploop
-
+#pre_settled = rpc-cast
+#pre_settled = rpc-reply
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[database]
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://glance:opnfv_secret@192.168.10.23/glance?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
+#db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/glance/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -3497,9 +3838,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -3512,8 +3854,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -3537,10 +3879,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -3551,42 +3894,12 @@
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
 
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -3612,11 +3925,11 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
-# value)
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
@@ -3643,1106 +3956,210 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = glance
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain
+# received in the requests "origin" header. Format:
+# "<protocol>://<host>[:<port>]", no trailing slash. Example:
+# https://horizon.example.com (list value)
+allowed_origin = https://100.64.200.101
+
+# Indicate that the actual request can include user credentials
+# (boolean value)
+
+# Indicate which headers are safe to expose to the API. Defaults to
+# HTTP Simple Headers. (list value)
+
+# Maximum cache age of CORS preflight requests. (integer value)
+
+# Indicate which methods can be used during the actual request. (list
+# value)
+
+# Indicate which header field names may be used during the actual
+# request. (list value)
+
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory should
-# only be writable by the user running the processes that need locking. Defaults
-# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
-# path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+[barbican]
+#
+# From castellan.config
+#
+
+# Use this endpoint to connect to Barbican, for example:
+# "http://localhost:9311/" (string value)
+#barbican_endpoint = <None>
+barbican_endpoint = http://192.168.10.35:9311
+
+# Version of the Barbican API, for example: "v1" (string value)
+#barbican_api_version = <None>
+
+# Use this endpoint to connect to Keystone (string value)
+# Deprecated group/name - [key_manager]/auth_url
+#auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://192.168.10.35:35357/v3
+
+# Number of seconds to wait before retrying poll for key creation completion
 # (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[paste_deploy]
-
-#
-# From glance.api
-#
-
-#
-# Deployment flavor to use in the server application pipeline.
-#
-# Provide a string value representing the appropriate deployment
-# flavor used in the server application pipleline. This is typically
-# the partial name of a pipeline in the paste configuration file with
-# the service name removed.
-#
-# For example, if your paste section name in the paste configuration
-# file is [pipeline:glance-api-keystone], set ``flavor`` to
-# ``keystone``.
-#
-# Possible values:
-#     * String value representing a partial pipeline name.
-#
-# Related Options:
-#     * config_file
-#
-#  (string value)
-#flavor = keystone
-
-#
-# Name of the paste configuration file.
-#
-# Provide a string value representing the name of the paste
-# configuration file to use for configuring piplelines for
-# server application deployments.
-#
-# NOTES:
-#     * Provide the name or the path relative to the glance directory
-#       for the paste configuration file and not the absolute path.
-#     * The sample paste configuration file shipped with Glance need
-#       not be edited in most cases as it comes with ready-made
-#       pipelines for all common deployment flavors.
-#
-# If no value is specified for this option, the ``paste.ini`` file
-# with the prefix of the corresponding Glance service's configuration
-# file name will be searched for in the known configuration
-# directories. (For example, if this option is missing from or has no
-# value set in ``glance-api.conf``, the service will look for a file
-# named ``glance-api-paste.ini``.) If the paste configuration file is
-# not found, the service will not start.
-#
-# Possible values:
-#     * A string value representing the name of the paste configuration
-#       file.
-#
-# Related Options:
-#     * flavor
-#
-#  (string value)
-#config_file = glance-api-paste.ini
-
-
-[profiler]
-
-#
-# From glance.api
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this
-# project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format: <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending
-# spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
-
-
-[store_type_location_strategy]
-
-#
-# From glance.api
-#
-
-#
-# Preference order of storage backends.
-#
-# Provide a comma separated list of store names in the order in
-# which images should be retrieved from storage backends.
-# These store names must be registered with the ``stores``
-# configuration option.
-#
-# NOTE: The ``store_type_preference`` configuration option is applied
-# only if ``store_type`` is chosen as a value for the
-# ``location_strategy`` configuration option. An empty list will not
-# change the location order.
-#
-# Possible values:
-#     * Empty list
-#     * Comma separated list of registered store names. Legal values are:
-#         * file
-#         * http
-#         * rbd
-#         * swift
-#         * sheepdog
-#         * cinder
-#         * vmware
-#
-# Related options:
-#     * location_strategy
-#     * stores
-#
-#  (list value)
-#store_type_preference =
-
-
-[task]
-
-#
-# From glance.api
-#
-
-# Time in hours for which a task lives after, either succeeding or failing
-# (integer value)
-# Deprecated group/name - [DEFAULT]/task_time_to_live
-#task_time_to_live = 48
-
-#
-# Task executor to be used to run task scripts.
-#
-# Provide a string value representing the executor to use for task
-# executions. By default, ``TaskFlow`` executor is used.
-#
-# ``TaskFlow`` helps make task executions easy, consistent, scalable
-# and reliable. It also enables creation of lightweight task objects
-# and/or functions that are combined together into flows in a
-# declarative manner.
-#
-# Possible values:
-#     * taskflow
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#task_executor = taskflow
-
-#
-# Absolute path to the work directory to use for asynchronous
-# task operations.
-#
-# The directory set here will be used to operate over images -
-# normally before they are imported in the destination store.
-#
-# NOTE: When providing a value for ``work_dir``, please make sure
-# that enough space is provided for concurrent tasks to run
-# efficiently without running out of space.
-#
-# A rough estimation can be done by multiplying the number of
-# ``max_workers`` with an average image size (e.g 500MB). The image
-# size estimation should be done based on the average size in your
-# deployment. Note that depending on the tasks running you may need
-# to multiply this number by some factor depending on what the task
-# does. For example, you may want to double the available size if
-# image conversion is enabled. All this being said, remember these
-# are just estimations and you should do them based on the worst
-# case scenario and be prepared to act in case they were wrong.
-#
-# Possible values:
-#     * String value representing the absolute path to the working
-#       directory
-#
-# Related Options:
-#     * None
-#
-#  (string value)
-#work_dir = /work_dir
-
-
-[taskflow_executor]
-
-#
-# From glance.api
-#
-
-#
-# Set the taskflow engine mode.
-#
-# Provide a string type value to set the mode in which the taskflow
-# engine would schedule tasks to the workers on the hosts. Based on
-# this mode, the engine executes tasks either in single or multiple
-# threads. The possible values for this configuration option are:
-# ``serial`` and ``parallel``. When set to ``serial``, the engine runs
-# all the tasks in a single thread which results in serial execution
-# of tasks. Setting this to ``parallel`` makes the engine run tasks in
-# multiple threads. This results in parallel execution of tasks.
-#
-# Possible values:
-#     * serial
-#     * parallel
-#
-# Related options:
-#     * max_workers
-#
-#  (string value)
-# Possible values:
-# serial - <No description provided>
-# parallel - <No description provided>
-#engine_mode = parallel
-
-#
-# Set the number of engine executable tasks.
-#
-# Provide an integer value to limit the number of workers that can be
-# instantiated on the hosts. In other words, this number defines the
-# number of parallel tasks that can be executed at the same time by
-# the taskflow engine. This value can be greater than one when the
-# engine mode is set to parallel.
-#
-# Possible values:
-#     * Integer value greater than or equal to 1
-#
-# Related options:
-#     * engine_mode
-#
-#  (integer value)
-# Minimum value: 1
-# Deprecated group/name - [task]/eventlet_executor_pool_size
-#max_workers = 10
-
-#
-# Set the desired image conversion format.
-#
-# Provide a valid image format to which you want images to be
-# converted before they are stored for consumption by Glance.
-# Appropriate image format conversions are desirable for specific
-# storage backends in order to facilitate efficient handling of
-# bandwidth and usage of the storage infrastructure.
-#
-# By default, ``conversion_format`` is not set and must be set
-# explicitly in the configuration file.
-#
-# The allowed values for this option are ``raw``, ``qcow2`` and
-# ``vmdk``. The  ``raw`` format is the unstructured disk format and
-# should be chosen when RBD or Ceph storage backends are used for
-# image storage. ``qcow2`` is supported by the QEMU emulator that
-# expands dynamically and supports Copy on Write. The ``vmdk`` is
-# another common disk format supported by many common virtual machine
-# monitors like VMWare Workstation.
-#
-# Possible values:
-#     * qcow2
-#     * raw
-#     * vmdk
-#
-# Related options:
-#     * disk_formats
-#
-#  (string value)
-# Possible values:
-# qcow2 - <No description provided>
-# raw - <No description provided>
-# vmdk - <No description provided>
-#conversion_format = raw
+#retry_delay = 1
+
+# Number of times to retry poll for key creation completion (integer value)
+#number_of_retries = 60
+
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
+#verify_ssl = true
+
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
+# admin (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+#barbican_endpoint_type = public
+barbican_endpoint_type = internal

2019-05-09 14:25:34,555 [salt.state       :1951][INFO    ][14082] Completed state [/etc/glance/glance-api.conf] at time 14:25:34.554962 duration_in_ms=549.106
2019-05-09 14:25:34,556 [salt.state       :1780][INFO    ][14082] Running state [/etc/glance/glance-api-paste.ini] at time 14:25:34.556069
2019-05-09 14:25:34,556 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/glance/glance-api-paste.ini]
2019-05-09 14:25:34,578 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/files/rocky/glance-api-paste.ini'
2019-05-09 14:25:34,662 [salt.state       :300 ][INFO    ][14082] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 # Use this pipeline for no auth or image caching - DEFAULT
 [pipeline:glance-api]
 pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler unauthenticated-context rootapp
@@ -12,7 +13,7 @@
 
 # Use this pipeline for keystone auth
 [pipeline:glance-api-keystone]
-pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context  rootapp
+pipeline = cors healthcheck http_proxy_to_wsgi versionnegotiation osprofiler authtoken context rootapp
 
 # Use this pipeline for keystone auth with image caching
 [pipeline:glance-api-keystone+caching]

2019-05-09 14:25:34,662 [salt.state       :1951][INFO    ][14082] Completed state [/etc/glance/glance-api-paste.ini] at time 14:25:34.662370 duration_in_ms=106.301
2019-05-09 14:25:34,665 [salt.state       :1780][INFO    ][14082] Running state [glance-manage db_sync] at time 14:25:34.665146
2019-05-09 14:25:34,665 [salt.state       :1813][INFO    ][14082] Executing state cmd.run for [glance-manage db_sync]
2019-05-09 14:25:34,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command '/bin/false' in directory '/root'
2019-05-09 14:25:34,689 [salt.state       :300 ][INFO    ][14082] onlyif execution failed
2019-05-09 14:25:34,689 [salt.state       :1951][INFO    ][14082] Completed state [glance-manage db_sync] at time 14:25:34.689708 duration_in_ms=24.562
2019-05-09 14:25:34,693 [salt.state       :1780][INFO    ][14082] Running state [glance-manage db_load_metadefs] at time 14:25:34.692971
2019-05-09 14:25:34,693 [salt.state       :1813][INFO    ][14082] Executing state cmd.run for [glance-manage db_load_metadefs]
2019-05-09 14:25:34,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command '/bin/false' in directory '/root'
2019-05-09 14:25:34,715 [salt.state       :300 ][INFO    ][14082] onlyif execution failed
2019-05-09 14:25:34,716 [salt.state       :1951][INFO    ][14082] Completed state [glance-manage db_load_metadefs] at time 14:25:34.716558 duration_in_ms=23.587
2019-05-09 14:25:34,718 [salt.state       :1780][INFO    ][14082] Running state [/etc/default/glance-api] at time 14:25:34.718019
2019-05-09 14:25:34,718 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/default/glance-api]
2019-05-09 14:25:34,746 [salt.fileclient  :1219][INFO    ][14082] Fetching file from saltenv 'base', ** done ** 'glance/files/default'
2019-05-09 14:25:34,764 [salt.state       :300 ][INFO    ][14082] File changed:
New file
2019-05-09 14:25:34,765 [salt.state       :1951][INFO    ][14082] Completed state [/etc/default/glance-api] at time 14:25:34.765310 duration_in_ms=47.291
2019-05-09 14:25:34,766 [salt.state       :1780][INFO    ][14082] Running state [/etc/default/glance-registry] at time 14:25:34.766220
2019-05-09 14:25:34,766 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/default/glance-registry]
2019-05-09 14:25:34,797 [salt.state       :300 ][INFO    ][14082] File changed:
New file
2019-05-09 14:25:34,797 [salt.state       :1951][INFO    ][14082] Completed state [/etc/default/glance-registry] at time 14:25:34.797647 duration_in_ms=31.427
2019-05-09 14:25:34,798 [salt.state       :1780][INFO    ][14082] Running state [/etc/default/glance-glare] at time 14:25:34.798528
2019-05-09 14:25:34,799 [salt.state       :1813][INFO    ][14082] Executing state file.managed for [/etc/default/glance-glare]
2019-05-09 14:25:34,828 [salt.state       :300 ][INFO    ][14082] File changed:
New file
2019-05-09 14:25:34,829 [salt.state       :1951][INFO    ][14082] Completed state [/etc/default/glance-glare] at time 14:25:34.829155 duration_in_ms=30.627
2019-05-09 14:25:34,834 [salt.state       :1780][INFO    ][14082] Running state [glance-api] at time 14:25:34.834031
2019-05-09 14:25:34,834 [salt.state       :1813][INFO    ][14082] Executing state service.running for [glance-api]
2019-05-09 14:25:34,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'status', 'glance-api.service', '-n', '0'] in directory '/root'
2019-05-09 14:25:34,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2019-05-09 14:25:34,860 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'is-enabled', 'glance-api.service'] in directory '/root'
2019-05-09 14:25:34,876 [salt.state       :300 ][INFO    ][14082] The service glance-api is already running
2019-05-09 14:25:34,876 [salt.state       :1951][INFO    ][14082] Completed state [glance-api] at time 14:25:34.876596 duration_in_ms=42.566
2019-05-09 14:25:34,876 [salt.state       :1780][INFO    ][14082] Running state [glance-api] at time 14:25:34.876845
2019-05-09 14:25:34,877 [salt.state       :1813][INFO    ][14082] Executing state service.mod_watch for [glance-api]
2019-05-09 14:25:34,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'is-active', 'glance-api.service'] in directory '/root'
2019-05-09 14:25:34,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'glance-api.service'] in directory '/root'
2019-05-09 14:25:34,989 [salt.state       :300 ][INFO    ][14082] {'glance-api': True}
2019-05-09 14:25:34,990 [salt.state       :1951][INFO    ][14082] Completed state [glance-api] at time 14:25:34.990099 duration_in_ms=113.252
2019-05-09 14:25:34,993 [salt.state       :1780][INFO    ][14082] Running state [glance-registry] at time 14:25:34.993510
2019-05-09 14:25:34,994 [salt.state       :1813][INFO    ][14082] Executing state service.running for [glance-registry]
2019-05-09 14:25:34,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'status', 'glance-registry.service', '-n', '0'] in directory '/root'
2019-05-09 14:25:35,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'is-active', 'glance-registry.service'] in directory '/root'
2019-05-09 14:25:35,052 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'is-enabled', 'glance-registry.service'] in directory '/root'
2019-05-09 14:25:35,077 [salt.state       :300 ][INFO    ][14082] The service glance-registry is already running
2019-05-09 14:25:35,078 [salt.state       :1951][INFO    ][14082] Completed state [glance-registry] at time 14:25:35.078430 duration_in_ms=84.919
2019-05-09 14:25:35,079 [salt.state       :1780][INFO    ][14082] Running state [glance-registry] at time 14:25:35.078986
2019-05-09 14:25:35,079 [salt.state       :1813][INFO    ][14082] Executing state service.mod_watch for [glance-registry]
2019-05-09 14:25:35,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemctl', 'is-active', 'glance-registry.service'] in directory '/root'
2019-05-09 14:25:35,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'glance-registry.service'] in directory '/root'
2019-05-09 14:25:35,162 [salt.state       :300 ][INFO    ][14082] {'glance-registry': True}
2019-05-09 14:25:35,163 [salt.state       :1951][INFO    ][14082] Completed state [glance-registry] at time 14:25:35.163235 duration_in_ms=84.248
2019-05-09 14:25:35,170 [salt.state       :1780][INFO    ][14082] Running state [glance-cache-pruner] at time 14:25:35.170864
2019-05-09 14:25:35,171 [salt.state       :1813][INFO    ][14082] Executing state cron.present for [glance-cache-pruner]
2019-05-09 14:25:35,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command 'crontab -u glance -l' in directory '/root'
2019-05-09 14:25:35,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command 'crontab -u glance /tmp/__salt.tmp.amGSy_' in directory '/root'
2019-05-09 14:25:35,246 [salt.state       :300 ][INFO    ][14082] {'glance': 'glance-cache-pruner'}
2019-05-09 14:25:35,247 [salt.state       :1951][INFO    ][14082] Completed state [glance-cache-pruner] at time 14:25:35.247746 duration_in_ms=76.881
2019-05-09 14:25:35,249 [salt.state       :1780][INFO    ][14082] Running state [glance-cache-cleaner] at time 14:25:35.249718
2019-05-09 14:25:35,250 [salt.state       :1813][INFO    ][14082] Executing state cron.present for [glance-cache-cleaner]
2019-05-09 14:25:35,252 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command 'crontab -u glance -l' in directory '/root'
2019-05-09 14:25:35,278 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14082] Executing command 'crontab -u glance /tmp/__salt.tmp.1fGEVJ' in directory '/root'
2019-05-09 14:25:35,305 [salt.state       :300 ][INFO    ][14082] {'glance': 'glance-cache-cleaner'}
2019-05-09 14:25:35,306 [salt.state       :1951][INFO    ][14082] Completed state [glance-cache-cleaner] at time 14:25:35.306509 duration_in_ms=56.79
2019-05-09 14:25:35,308 [salt.state       :1780][INFO    ][14082] Running state [/srv/glance] at time 14:25:35.308555
2019-05-09 14:25:35,309 [salt.state       :1813][INFO    ][14082] Executing state file.directory for [/srv/glance]
2019-05-09 14:25:35,314 [salt.state       :300 ][INFO    ][14082] {'/srv/glance': 'New Dir'}
2019-05-09 14:25:35,314 [salt.state       :1951][INFO    ][14082] Completed state [/srv/glance] at time 14:25:35.314820 duration_in_ms=6.264
2019-05-09 14:25:35,316 [salt.state       :1780][INFO    ][14082] Running state [/var/lib/glance/images] at time 14:25:35.316035
2019-05-09 14:25:35,316 [salt.state       :1813][INFO    ][14082] Executing state file.directory for [/var/lib/glance/images]
2019-05-09 14:25:35,320 [salt.state       :300 ][INFO    ][14082] Directory /var/lib/glance/images is in the correct state
Directory /var/lib/glance/images updated
2019-05-09 14:25:35,320 [salt.state       :1951][INFO    ][14082] Completed state [/var/lib/glance/images] at time 14:25:35.320780 duration_in_ms=4.745
2019-05-09 14:25:35,328 [salt.minion      :1711][INFO    ][14082] Returning information for job: 20190509142501843292
2019-05-09 14:28:28,722 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509142828716666
2019-05-09 14:28:28,750 [salt.minion      :1432][INFO    ][15777] Starting a new job with PID 15777
2019-05-09 14:28:35,328 [salt.state       :915 ][INFO    ][15777] Loading fresh modules for state activity
2019-05-09 14:28:35,446 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/init.sls'
2019-05-09 14:28:35,508 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/controller.sls'
2019-05-09 14:28:36,649 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/db/offline_sync.sls'
2019-05-09 14:28:36,904 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/db/online_sync.sls'
2019-05-09 14:28:37,028 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/_ssl/mysql.sls'
2019-05-09 14:28:37,159 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/_ssl/rabbitmq.sls'
2019-05-09 14:28:38,285 [salt.state       :1780][INFO    ][15777] Running state [apache2] at time 14:28:38.285255
2019-05-09 14:28:38,285 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [apache2]
2019-05-09 14:28:38,286 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:28:38,696 [salt.state       :300 ][INFO    ][15777] All specified packages are already installed
2019-05-09 14:28:38,696 [salt.state       :1951][INFO    ][15777] Completed state [apache2] at time 14:28:38.696789 duration_in_ms=411.534
2019-05-09 14:28:38,697 [salt.state       :1780][INFO    ][15777] Running state [openssl] at time 14:28:38.697086
2019-05-09 14:28:38,697 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [openssl]
2019-05-09 14:28:38,759 [salt.state       :300 ][INFO    ][15777] All specified packages are already installed
2019-05-09 14:28:38,759 [salt.state       :1951][INFO    ][15777] Completed state [openssl] at time 14:28:38.759586 duration_in_ms=62.5
2019-05-09 14:28:38,760 [salt.state       :1780][INFO    ][15777] Running state [a2enmod ssl] at time 14:28:38.760175
2019-05-09 14:28:38,760 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [a2enmod ssl]
2019-05-09 14:28:38,760 [salt.state       :300 ][INFO    ][15777] /etc/apache2/mods-enabled/ssl.load exists
2019-05-09 14:28:38,760 [salt.state       :1951][INFO    ][15777] Completed state [a2enmod ssl] at time 14:28:38.760909 duration_in_ms=0.735
2019-05-09 14:28:38,761 [salt.state       :1780][INFO    ][15777] Running state [a2enmod rewrite] at time 14:28:38.761411
2019-05-09 14:28:38,761 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [a2enmod rewrite]
2019-05-09 14:28:38,761 [salt.state       :300 ][INFO    ][15777] /etc/apache2/mods-enabled/rewrite.load exists
2019-05-09 14:28:38,762 [salt.state       :1951][INFO    ][15777] Completed state [a2enmod rewrite] at time 14:28:38.762013 duration_in_ms=0.602
2019-05-09 14:28:38,762 [salt.state       :1780][INFO    ][15777] Running state [libapache2-mod-wsgi] at time 14:28:38.762491
2019-05-09 14:28:38,762 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-05-09 14:28:38,770 [salt.state       :300 ][INFO    ][15777] All specified packages are already installed
2019-05-09 14:28:38,770 [salt.state       :1951][INFO    ][15777] Completed state [libapache2-mod-wsgi] at time 14:28:38.770174 duration_in_ms=7.684
2019-05-09 14:28:38,770 [salt.state       :1780][INFO    ][15777] Running state [a2enmod wsgi] at time 14:28:38.770659
2019-05-09 14:28:38,770 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [a2enmod wsgi]
2019-05-09 14:28:38,771 [salt.state       :300 ][INFO    ][15777] /etc/apache2/mods-enabled/wsgi.load exists
2019-05-09 14:28:38,771 [salt.state       :1951][INFO    ][15777] Completed state [a2enmod wsgi] at time 14:28:38.771255 duration_in_ms=0.596
2019-05-09 14:28:38,771 [salt.state       :1780][INFO    ][15777] Running state [a2enmod status -q] at time 14:28:38.771726
2019-05-09 14:28:38,771 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [a2enmod status -q]
2019-05-09 14:28:38,772 [salt.state       :300 ][INFO    ][15777] /etc/apache2/mods-enabled/status.load exists
2019-05-09 14:28:38,772 [salt.state       :1951][INFO    ][15777] Completed state [a2enmod status -q] at time 14:28:38.772345 duration_in_ms=0.618
2019-05-09 14:28:38,774 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:28:38.774595
2019-05-09 14:28:38,774 [salt.state       :1813][INFO    ][15777] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-05-09 14:28:38,775 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-05-09 14:28:38,775 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:28:38.775218 duration_in_ms=0.622
2019-05-09 14:28:38,775 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:28:38.775403
2019-05-09 14:28:38,775 [salt.state       :1813][INFO    ][15777] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-05-09 14:28:38,775 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-05-09 14:28:38,776 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:28:38.775969 duration_in_ms=0.566
2019-05-09 14:28:38,776 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:28:38.776144
2019-05-09 14:28:38,776 [salt.state       :1813][INFO    ][15777] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-05-09 14:28:38,776 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-05-09 14:28:38,776 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:28:38.776715 duration_in_ms=0.571
2019-05-09 14:28:38,776 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:28:38.776888
2019-05-09 14:28:38,777 [salt.state       :1813][INFO    ][15777] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-05-09 14:28:38,777 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-05-09 14:28:38,777 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:28:38.777426 duration_in_ms=0.538
2019-05-09 14:28:38,779 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 14:28:38.779695
2019-05-09 14:28:38,779 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-05-09 14:28:38,841 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-05-09 14:28:38,841 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 14:28:38.841481 duration_in_ms=61.785
2019-05-09 14:28:38,842 [salt.state       :1780][INFO    ][15777] Running state [a2enmod mpm_event] at time 14:28:38.842508
2019-05-09 14:28:38,842 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [a2enmod mpm_event]
2019-05-09 14:28:38,842 [salt.state       :300 ][INFO    ][15777] /etc/apache2/mods-enabled/mpm_event.load exists
2019-05-09 14:28:38,843 [salt.state       :1951][INFO    ][15777] Completed state [a2enmod mpm_event] at time 14:28:38.843117 duration_in_ms=0.609
2019-05-09 14:28:38,843 [salt.state       :1780][INFO    ][15777] Running state [apache_server_service_task] at time 14:28:38.843709
2019-05-09 14:28:38,843 [salt.state       :1813][INFO    ][15777] Executing state test.show_notification for [apache_server_service_task]
2019-05-09 14:28:38,844 [salt.state       :300 ][INFO    ][15777] Running apache.server.service
2019-05-09 14:28:38,844 [salt.state       :1951][INFO    ][15777] Completed state [apache_server_service_task] at time 14:28:38.844243 duration_in_ms=0.523
2019-05-09 14:28:38,844 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/ports.conf] at time 14:28:38.844728
2019-05-09 14:28:38,844 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/apache2/ports.conf]
2019-05-09 14:28:38,901 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/ports.conf is in the correct state
2019-05-09 14:28:38,902 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/ports.conf] at time 14:28:38.902126 duration_in_ms=57.398
2019-05-09 14:28:38,902 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/conf-available/security.conf] at time 14:28:38.902620
2019-05-09 14:28:38,902 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-05-09 14:28:38,961 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/conf-available/security.conf is in the correct state
2019-05-09 14:28:38,961 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/conf-available/security.conf] at time 14:28:38.961461 duration_in_ms=58.841
2019-05-09 14:28:38,974 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 14:28:38.974843
2019-05-09 14:28:38,975 [salt.state       :1813][INFO    ][15777] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-05-09 14:28:38,975 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-05-09 14:28:38,975 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 14:28:38.975603 duration_in_ms=0.76
2019-05-09 14:28:38,976 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:28:38.976253
2019-05-09 14:28:38,976 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-05-09 14:28:39,223 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-05-09 14:28:39,223 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:28:39.223726 duration_in_ms=247.473
2019-05-09 14:28:39,224 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:28:39.224578
2019-05-09 14:28:39,224 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-05-09 14:28:39,445 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-05-09 14:28:39,445 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:28:39.445289 duration_in_ms=220.711
2019-05-09 14:28:39,445 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:28:39.445792
2019-05-09 14:28:39,446 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-05-09 14:28:39,765 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-05-09 14:28:39,765 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:28:39.765492 duration_in_ms=319.7
2019-05-09 14:28:39,766 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:28:39.766220
2019-05-09 14:28:39,766 [salt.state       :1813][INFO    ][15777] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-05-09 14:28:39,768 [salt.state       :300 ][INFO    ][15777] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-05-09 14:28:39,768 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:28:39.768681 duration_in_ms=2.461
2019-05-09 14:28:39,774 [salt.state       :1780][INFO    ][15777] Running state [apache2] at time 14:28:39.774226
2019-05-09 14:28:39,774 [salt.state       :1813][INFO    ][15777] Executing state service.running for [apache2]
2019-05-09 14:28:39,775 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-05-09 14:28:39,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:28:39,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:28:39,875 [salt.state       :300 ][INFO    ][15777] The service apache2 is already running
2019-05-09 14:28:39,876 [salt.state       :1951][INFO    ][15777] Completed state [apache2] at time 14:28:39.876573 duration_in_ms=102.346
2019-05-09 14:28:39,879 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/conf-enabled/security.conf] at time 14:28:39.879601
2019-05-09 14:28:39,880 [salt.state       :1813][INFO    ][15777] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-05-09 14:28:39,884 [salt.state       :300 ][INFO    ][15777] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-05-09 14:28:39,885 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/conf-enabled/security.conf] at time 14:28:39.884997 duration_in_ms=5.396
2019-05-09 14:28:39,885 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:28:39.885555
2019-05-09 14:28:39,886 [salt.state       :1813][INFO    ][15777] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-05-09 14:28:39,886 [salt.state       :300 ][INFO    ][15777] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-05-09 14:28:39,887 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:28:39.887228 duration_in_ms=1.672
2019-05-09 14:28:39,898 [salt.state       :1780][INFO    ][15777] Running state [debconf-utils] at time 14:28:39.898767
2019-05-09 14:28:39,899 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [debconf-utils]
2019-05-09 14:28:39,919 [salt.state       :300 ][INFO    ][15777] All specified packages are already installed
2019-05-09 14:28:39,920 [salt.state       :1951][INFO    ][15777] Completed state [debconf-utils] at time 14:28:39.920067 duration_in_ms=21.3
2019-05-09 14:28:39,921 [salt.state       :1780][INFO    ][15777] Running state [nova-consoleproxy] at time 14:28:39.921205
2019-05-09 14:28:39,921 [salt.state       :1813][INFO    ][15777] Executing state debconf.set for [nova-consoleproxy]
2019-05-09 14:28:39,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command 'debconf-get-selections' in directory '/root'
2019-05-09 14:28:40,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command 'debconf-set-selections /tmp/salt-CYuzl1' in directory '/root'
2019-05-09 14:28:40,519 [salt.state       :300 ][INFO    ][15777] {'nova-consoleproxy/daemon_type': 'novnc'}
2019-05-09 14:28:40,520 [salt.state       :1951][INFO    ][15777] Completed state [nova-consoleproxy] at time 14:28:40.520647 duration_in_ms=599.441
2019-05-09 14:28:40,529 [salt.state       :1780][INFO    ][15777] Running state [nova] at time 14:28:40.529825
2019-05-09 14:28:40,530 [salt.state       :1813][INFO    ][15777] Executing state group.present for [nova]
2019-05-09 14:28:40,532 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['groupadd', '-g 303', '-r', 'nova'] in directory '/root'
2019-05-09 14:28:40,564 [salt.state       :300 ][INFO    ][15777] {'passwd': 'x', 'gid': 303, 'name': 'nova', 'members': []}
2019-05-09 14:28:40,565 [salt.state       :1951][INFO    ][15777] Completed state [nova] at time 14:28:40.564910 duration_in_ms=35.085
2019-05-09 14:28:40,567 [salt.state       :1780][INFO    ][15777] Running state [nova] at time 14:28:40.567231
2019-05-09 14:28:40,568 [salt.state       :1813][INFO    ][15777] Executing state user.present for [nova]
2019-05-09 14:28:40,570 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['useradd', '-s', '/bin/false', '-u', '303', '-g', '303', '-m', '-d', '/var/lib/nova', '-r', 'nova'] in directory '/root'
2019-05-09 14:28:40,617 [salt.state       :300 ][INFO    ][15777] {'shell': '/bin/false', 'workphone': '', 'uid': 303, 'passwd': 'x', 'roomnumber': '', 'groups': ['nova'], 'home': '/var/lib/nova', 'name': 'nova', 'gid': 303, 'fullname': '', 'homephone': ''}
2019-05-09 14:28:40,618 [salt.state       :1951][INFO    ][15777] Completed state [nova] at time 14:28:40.618673 duration_in_ms=51.441
2019-05-09 14:28:40,621 [salt.state       :1780][INFO    ][15777] Running state [nova-api] at time 14:28:40.621747
2019-05-09 14:28:40,622 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [nova-api]
2019-05-09 14:28:40,679 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['apt-cache', '-q', 'policy', 'nova-api'] in directory '/root'
2019-05-09 14:28:40,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:28:43,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:28:43,709 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-api'] in directory '/root'
2019-05-09 14:28:43,759 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509142843754743
2019-05-09 14:28:43,771 [salt.minion      :1432][INFO    ][16249] Starting a new job with PID 16249
2019-05-09 14:28:43,804 [salt.minion      :1711][INFO    ][16249] Returning information for job: 20190509142843754743
2019-05-09 14:29:12,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:29:13,002 [salt.state       :300 ][INFO    ][15777] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pypowervm' changed from 'absent' to '1.1.16-1~u16.04+mcp'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'zvmcloudconnector-common' changed from 'absent' to '1.2.3-0ubuntu3~u16.04+mcp'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'python-microversion-parse' changed from 'absent' to '0.2.1-0.1~u16.04+mcp'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.5'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-nova' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'nova-api' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.7.12~u16.04+mcp'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'python-oslo.versionedobjects' changed from 'absent' to '1.33.3-1~u16.04+mcp9'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'nova-common' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.4'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-tooz' changed from 'absent' to '1.60.1-1.0~u16.04+mcp2'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2ubuntu0.16.04.1'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.5'
'qemu-system-i386' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1.8.5~u16.04+mcp1'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.7.12~u16.04+mcp'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.8.5~u16.04+mcp1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-os-traits' changed from 'absent' to '0.5.0-1.0~u16.04+mcp5'
'python-os-vif' changed from 'absent' to '1.9.1-1.0~u16.04+mcp6'
'qemu-system-x86-64' changed from 'absent' to '1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'python-oslo.reports' changed from 'absent' to '1.28.0-2~u16.04+mcp6'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-zvmcloudconnector' changed from 'absent' to '1.2.3-0ubuntu3~u16.04+mcp'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.8.5~u16.04+mcp1'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.7.12~u16.04+mcp'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.7.12~u16.04+mcp'
'python-zake' changed from 'absent' to '0.1.6-1'
'python2.7-nova' changed from 'absent' to '1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.7.12~u16.04+mcp'
'python-pyroute2' changed from 'absent' to '0.4.21-0.1~u16.04+mcp1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python2.7-pyroute2' changed from 'absent' to '1'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'libflac8' changed from 'absent' to '1.3.1-4'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2019-05-09 14:29:13,047 [salt.state       :915 ][INFO    ][15777] Loading fresh modules for state activity
2019-05-09 14:29:13,101 [salt.state       :1951][INFO    ][15777] Completed state [nova-api] at time 14:29:13.101495 duration_in_ms=32479.748
2019-05-09 14:29:13,118 [salt.state       :1780][INFO    ][15777] Running state [nova-conductor] at time 14:29:13.118172
2019-05-09 14:29:13,118 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [nova-conductor]
2019-05-09 14:29:13,853 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509142913846511
2019-05-09 14:29:13,865 [salt.minion      :1432][INFO    ][18288] Starting a new job with PID 18288
2019-05-09 14:29:13,879 [salt.minion      :1711][INFO    ][18288] Returning information for job: 20190509142913846511
2019-05-09 14:29:13,910 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:29:13,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-conductor'] in directory '/root'
2019-05-09 14:29:18,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:29:18,118 [salt.state       :300 ][INFO    ][15777] Made the following changes:
'nova-conductor' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'

2019-05-09 14:29:18,142 [salt.state       :915 ][INFO    ][15777] Loading fresh modules for state activity
2019-05-09 14:29:18,176 [salt.state       :1951][INFO    ][15777] Completed state [nova-conductor] at time 14:29:18.176144 duration_in_ms=5057.972
2019-05-09 14:29:18,181 [salt.state       :1780][INFO    ][15777] Running state [nova-consoleauth] at time 14:29:18.181759
2019-05-09 14:29:18,182 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [nova-consoleauth]
2019-05-09 14:29:18,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:29:18,886 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-consoleauth'] in directory '/root'
2019-05-09 14:29:22,874 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:29:22,927 [salt.state       :300 ][INFO    ][15777] Made the following changes:
'nova-consoleauth' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'

2019-05-09 14:29:22,962 [salt.state       :915 ][INFO    ][15777] Loading fresh modules for state activity
2019-05-09 14:29:23,000 [salt.state       :1951][INFO    ][15777] Completed state [nova-consoleauth] at time 14:29:23.000652 duration_in_ms=4818.891
2019-05-09 14:29:23,006 [salt.state       :1780][INFO    ][15777] Running state [nova-scheduler] at time 14:29:23.006580
2019-05-09 14:29:23,006 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [nova-scheduler]
2019-05-09 14:29:23,965 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:29:23,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-scheduler'] in directory '/root'
2019-05-09 14:29:27,153 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:29:27,196 [salt.state       :300 ][INFO    ][15777] Made the following changes:
'nova-scheduler' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'

2019-05-09 14:29:27,222 [salt.state       :915 ][INFO    ][15777] Loading fresh modules for state activity
2019-05-09 14:29:27,257 [salt.state       :1951][INFO    ][15777] Completed state [nova-scheduler] at time 14:29:27.257239 duration_in_ms=4250.658
2019-05-09 14:29:27,263 [salt.state       :1780][INFO    ][15777] Running state [python-novaclient] at time 14:29:27.263820
2019-05-09 14:29:27,264 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [python-novaclient]
2019-05-09 14:29:27,914 [salt.state       :300 ][INFO    ][15777] All specified packages are already installed
2019-05-09 14:29:27,915 [salt.state       :1951][INFO    ][15777] Completed state [python-novaclient] at time 14:29:27.914999 duration_in_ms=651.176
2019-05-09 14:29:27,916 [salt.state       :1780][INFO    ][15777] Running state [nova-novncproxy] at time 14:29:27.916063
2019-05-09 14:29:27,916 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [nova-novncproxy]
2019-05-09 14:29:27,938 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:29:27,965 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-novncproxy'] in directory '/root'
2019-05-09 14:29:32,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:29:32,289 [salt.state       :300 ][INFO    ][15777] Made the following changes:
'nova-novncproxy' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'
'python-novnc' changed from 'absent' to '1:0.6.1-1.1~u16.04+mcp3'
'websockify' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp3'
'websockify-common' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp3'
'libjs-swfobject' changed from 'absent' to '2.2+dfsg-1'
'novnc' changed from 'absent' to '1:0.6.1-1.1~u16.04+mcp3'
'python-websockify' changed from 'absent' to '0.8.0+dfsg1-7~u16.04+mcp3'

2019-05-09 14:29:32,343 [salt.state       :915 ][INFO    ][15777] Loading fresh modules for state activity
2019-05-09 14:29:32,412 [salt.state       :1951][INFO    ][15777] Completed state [nova-novncproxy] at time 14:29:32.412704 duration_in_ms=4496.64
2019-05-09 14:29:32,415 [salt.state       :1780][INFO    ][15777] Running state [nova_ssl_mysql] at time 14:29:32.415468
2019-05-09 14:29:32,415 [salt.state       :1813][INFO    ][15777] Executing state test.show_notification for [nova_ssl_mysql]
2019-05-09 14:29:32,416 [salt.state       :300 ][INFO    ][15777] Running nova._ssl.mysql
2019-05-09 14:29:32,416 [salt.state       :1951][INFO    ][15777] Completed state [nova_ssl_mysql] at time 14:29:32.416151 duration_in_ms=0.683
2019-05-09 14:29:32,416 [salt.state       :1780][INFO    ][15777] Running state [nova_controller_ssl_rabbitmq] at time 14:29:32.416819
2019-05-09 14:29:32,417 [salt.state       :1813][INFO    ][15777] Executing state test.show_notification for [nova_controller_ssl_rabbitmq]
2019-05-09 14:29:32,417 [salt.state       :300 ][INFO    ][15777] Running nova._ssl.rabbitmq
2019-05-09 14:29:32,417 [salt.state       :1951][INFO    ][15777] Completed state [nova_controller_ssl_rabbitmq] at time 14:29:32.417401 duration_in_ms=0.581
2019-05-09 14:29:32,429 [salt.state       :1780][INFO    ][15777] Running state [/etc/nova/nova.conf] at time 14:29:32.429145
2019-05-09 14:29:32,429 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/nova/nova.conf]
2019-05-09 14:29:32,508 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/files/rocky/nova-controller.conf.Debian'
2019-05-09 14:29:33,052 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/castellan/_barbican.conf'
2019-05-09 14:29:33,091 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/keystoneauth/_type_password.conf'
2019-05-09 14:29:33,148 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/keystonemiddleware/_auth_token.conf'
2019-05-09 14:29:33,400 [salt.state       :300 ][INFO    ][15777] File changed:
--- 
+++ 
@@ -1,7 +1,5 @@
+
 [DEFAULT]
-log_dir = /var/log/nova
-lock_path = /var/lock/nova
-state_path = /var/lib/nova
 
 #
 # From nova.conf
@@ -63,7 +61,7 @@
 # *  period with offset, example: ``month@15`` will result in monthly audits
 #    starting on 15th day of month.
 #  (string value)
-#instance_usage_audit_period = month
+instance_usage_audit_period = hour
 
 #
 # Start and use a daemon that can run the commands that need to be run with
@@ -99,7 +97,7 @@
 # * ``powervm.PowerVMDriver``
 # * ``zvm.ZVMDriver``
 #  (string value)
-#compute_driver = <None>
+compute_driver = libvirt.LibvirtDriver
 
 #
 # Allow destination machine to match source for resize. Useful when
@@ -108,7 +106,7 @@
 # the same host to the destination options. Also set to true
 # if you allow the ServerGroupAffinityFilter and need to resize.
 #  (boolean value)
-#allow_resize_to_same_host = false
+allow_resize_to_same_host = true
 
 #
 # Image properties that should not be inherited from the instance
@@ -204,7 +202,7 @@
 # * True: Instances should fail after VIF plugging timeout
 # * False: Instances should continue booting after VIF plugging timeout
 #  (boolean value)
-#vif_plugging_is_fatal = true
+vif_plugging_is_fatal = true
 
 #
 # Timeout for Neutron VIF plugging event message arrival.
@@ -223,7 +221,7 @@
 #   arrive at all.
 #  (integer value)
 # Minimum value: 0
-#vif_plugging_timeout = 300
+vif_plugging_timeout = 300
 
 # Path to '/etc/network/interfaces' template.
 #
@@ -277,14 +275,7 @@
 # Enable use of copy-on-write (cow) images.
 #
 # QEMU/KVM allow the use of qcow2 as backing files. By disabling this,
-# backing files will not be used. This option is also used by image backends.
-# If the value is False, images are flattened after fetching or cloning.
-# This makes instance images completely independent from parent images.
-#
-# Related options:
-#
-# * ``images_type``: setting ``use_cow_images`` option to False is not supported
-#   when ``images_type=qcow2`` is being used.
+# backing files will not be used.
 #  (boolean value)
 #use_cow_images = true
 
@@ -468,7 +459,7 @@
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#cpu_allocation_ratio = 0.0
+cpu_allocation_ratio = 16.0
 
 #
 # This option helps you specify virtual RAM to physical RAM
@@ -497,7 +488,7 @@
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#ram_allocation_ratio = 0.0
+ram_allocation_ratio = 1.5
 
 #
 # This option helps you specify virtual disk to physical disk
@@ -530,7 +521,7 @@
 # * Any valid positive integer or float value
 #  (floating point value)
 # Minimum value: 0
-#disk_allocation_ratio = 0.0
+disk_allocation_ratio = 1.0
 
 #
 # Console proxy host to be used to connect to instances on this host. It is the
@@ -568,10 +559,6 @@
 # * $state_path/instances where state_path is a config option that specifies
 #   the top-level directory for maintaining nova's state. (default) or
 #   Any string representing directory path.
-#
-# Related options:
-#
-# * ``[workarounds]/ensure_libvirt_rbd_instance_dir_cleanup``
 #  (string value)
 #instances_path = $state_path/instances
 
@@ -582,6 +569,7 @@
 #  (boolean value)
 #instance_usage_audit = false
 
+
 #
 # Maximum number of 1 second retries in live_migration. It specifies number
 # of retries to iptables when it complains. It happens when an user continuously
@@ -656,7 +644,7 @@
 # * Any negative value is treated as 0.
 # * For any value > 0, total attempts are (value + 1)
 #  (integer value)
-#block_device_allocate_retries = 60
+block_device_allocate_retries = 600
 
 #
 # Number of greenthreads available for use to sync power states.
@@ -1250,7 +1238,7 @@
 # * routing_source_ip
 # * vpn_ip
 #  (string value)
-#my_ip = <host_ipv4>
+my_ip = 192.168.10.37
 
 #
 # The IP address which is used to connect to the block storage network.
@@ -2097,7 +2085,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#force_dhcp_release = true
+force_dhcp_release = true
 
 # DEPRECATED:
 # When this option is True, whenever a DNS entry must be updated, a fanout cast
@@ -2149,7 +2137,7 @@
 # Its value may be silently ignored in the future.
 # Reason:
 # nova-network is deprecated, as are any related configuration options.
-#dhcp_domain = novalocal
+dhcp_domain = novalocal
 
 # DEPRECATED:
 # This option allows you to specify the L3 management library to be used.
@@ -2603,17 +2591,8 @@
 # Run as a background process. (boolean value)
 #daemon = false
 
-# Disallow non-encrypted connections. (boolean value)
-#ssl_only = false
-
 # Set to True if source host is addressed with IPv6. (boolean value)
 #source_is_ipv6 = false
-
-# Path to SSL certificate file. (string value)
-#cert = self.pem
-
-# SSL key file (if separate from cert). (string value)
-#key = <None>
 
 #
 # Path to directory with content which will be served by a web server.
@@ -2650,7 +2629,7 @@
 #
 # * The full path to a directory.
 #  (string value)
-#bindir = /usr/local/bin
+#bindir = /tmp/nova/.tox/shared/local/bin
 
 #
 # The top-level directory for maintaining Nova's state.
@@ -2667,6 +2646,7 @@
 # * The full path to a directory. Defaults to value provided in ``pybasedir``.
 #  (string value)
 #state_path = $pybasedir
+state_path = /var/lib/nova
 
 #
 # This option allows setting an alternate timeout value for RPC calls
@@ -2677,7 +2657,6 @@
 # Operations with RPC calls that utilize this value:
 #
 # * live migration
-# * scheduling
 #
 # Related options:
 #
@@ -2697,7 +2676,7 @@
 #   is less than report_interval, services will routinely be considered down,
 #   because they report in too rarely.
 #  (integer value)
-#report_interval = 10
+report_interval = 60
 
 #
 # Maximum time in seconds since last check-in for up service
@@ -2711,7 +2690,7 @@
 # * report_interval (service_down_time should not be less than report_interval)
 # * scheduler.periodic_task_interval
 #  (integer value)
-#service_down_time = 60
+service_down_time = 180
 
 #
 # Enable periodic tasks.
@@ -2760,7 +2739,7 @@
 # The OpenStack API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#osapi_compute_listen = 0.0.0.0
+osapi_compute_listen = 192.168.10.37
 
 #
 # Port on which the OpenStack API will listen.
@@ -2795,7 +2774,7 @@
 # The metadata API service listens on this IP address for incoming
 # requests.
 #  (string value)
-#metadata_listen = 0.0.0.0
+metadata_listen = 192.168.10.37
 
 #
 # Port on which the metadata API will listen.
@@ -2822,7 +2801,7 @@
 # * None (default value)
 #  (integer value)
 # Minimum value: 1
-#metadata_workers = <None>
+metadata_workers = 8
 
 #
 # This option specifies the driver to be used for the servicegroup service.
@@ -2849,7 +2828,6 @@
 # db - <No description provided>
 # mc - <No description provided>
 #servicegroup_driver = db
-
 #
 # From oslo.log
 #
@@ -2887,19 +2865,19 @@
 
 # Uses logging handler designed to watch file system. When log file is moved or
 # removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and Linux
-# platform is used. This option is ignored if log_config_append is set. (boolean
-# value)
+# instantaneously. It makes sense only if log_file option is specified and
+# Linux platform is used. This option is ignored if log_config_append is set.
+# (boolean value)
 #watch_log_file = false
 
 # Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append is
-# set. (boolean value)
+# changed later to honor RFC5424. This option is ignored if log_config_append
+# is set. (boolean value)
 #use_syslog = false
 
 # Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol which
-# includes structured metadata in addition to log messages.This option is
+# to enable journal support. Doing so will use the journal native protocol
+# which includes structured metadata in addition to log messages.This option is
 # ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
@@ -2922,8 +2900,8 @@
 # value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is
-# DEBUG. (string value)
+# Additional data to append to log message when logging level for the message
+# is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
 # Prefix each line of exception output with this format. (string value)
@@ -2940,7 +2918,8 @@
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message. (string
+# value)
 #instance_format = "[instance: %(uuid)s] "
 
 # The format for an instance UUID that is passed with the log message. (string
@@ -2953,9 +2932,9 @@
 # Maximum number of logged messages per rate_limit_interval. (integer value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
-# empty string. Logs with level greater or equal to rate_limit_except_level are
-# not filtered. An empty string means that all levels are filtered. (string
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
+# or empty string. Logs with level greater or equal to rate_limit_except_level
+# are not filtered. An empty string means that all levels are filtered. (string
 # value)
 #rate_limit_except_level = CRITICAL
 
@@ -3001,10 +2980,10 @@
 #rpc_zmq_host = localhost
 
 # Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
+# closing a socket. The default value of -1 specifies an infinite linger
+# period. The value of 0 specifies no linger period. Pending messages shall be
+# discarded immediately when the socket is closed. Positive values specify an
+# upper bound for the linger period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
@@ -3012,8 +2991,9 @@
 # exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
+
+# Expiration timeout in seconds of a name service record about existing target
+# ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
 # Update period in seconds of a name service record about existing target.
@@ -3071,27 +3051,28 @@
 
 # The duration between two keepalive transmissions in idle condition. The unit
 # is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
+# etc. The default value of -1 (or any other negative value and 0) means to
+# skip any overrides and leave it to OS default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
 # The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
+# end is not available. The default value of -1 (or any other negative value
+# and 0) means to skip any overrides and leave it to OS default. (integer
+# value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
 # acknowledgement to the previous keepalive transmission is not received. The
 # unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
+# Windows etc. The default value of -1 (or any other negative value and 0)
+# means to skip any overrides and leave it to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
 # Maximum number of (green) threads to work concurrently. (integer value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which it is
+# not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
 # Wait for message acknowledgements from receivers. This mechanism works only
@@ -3125,6 +3106,7 @@
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
+rpc_response_timeout = 30
 
 # The network address and optional user credentials for connecting to the
 # messaging backend, in URL format. The expected format is:
@@ -3138,6 +3120,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -3148,7 +3131,8 @@
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
+#control_exchange = keystone
+
 
 #
 # From oslo.service.periodic_task
@@ -3380,7 +3364,7 @@
 #  (integer value)
 # Minimum value: 0
 # Deprecated group/name - [DEFAULT]/osapi_max_limit
-#max_limit = 1000
+max_limit = 1000
 
 #
 # This string is prepended to the normal URL that is returned in links to the
@@ -3479,72 +3463,127 @@
 
 
 [api_database]
-connection = sqlite:////var/lib/nova/nova_api.sqlite
-#
-# The *Nova API Database* is a separate database which is used for information
-# which is used across *cells*. This database is mandatory since the Mitaka
-# release (13.0.0).
-
-#
-# From nova.conf
-#
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
 
 # The SQLAlchemy connection string to use to connect to the database. (string
 # value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
 #connection = <None>
+connection = mysql+pymysql://nova:opnfv_secret@192.168.10.23/nova_api?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including the
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
+# (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster (NDB).
+# (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer than this
+# number of seconds will be replaced with a new one the next time they are
+# checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The option to set the minimum pool size is not supported by
+# sqlalchemy.
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to -1 to
+# specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
+# value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database operation up to
+# db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries of a
+# database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before error is
+# raised. Set to -1 to specify an infinite retry count. (integer value)
+#db_max_retries = 20
 
 # Optional URL parameters to append onto the connection URL at connect time;
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [api_database]/idle_timeout
-#connection_recycle_time = 3600
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
-#max_pool_size = <None>
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-#max_overflow = <None>
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-#pool_timeout = <None>
 
 
 [barbican]
-
-#
-# From nova.conf
+#
+# From castellan.config
 #
 
 # Use this endpoint to connect to Barbican, for example:
@@ -3557,6 +3596,7 @@
 # Use this endpoint to connect to Keystone (string value)
 # Deprecated group/name - [key_manager]/auth_url
 #auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://192.168.10.35:35357/v3
 
 # Number of seconds to wait before retrying poll for key creation completion
 # (integer value)
@@ -3565,23 +3605,23 @@
 # Number of times to retry poll for key creation completion (integer value)
 #number_of_retries = 60
 
-# Specifies if insecure TLS (https) requests. If False, the server's certificate
-# will not be validated (boolean value)
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
 #verify_ssl = true
 
-# Specifies the type of endpoint.  Allowed values are: public, private, and
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
 # admin (string value)
 # Possible values:
 # public - <No description provided>
 # internal - <No description provided>
 # admin - <No description provided>
 #barbican_endpoint_type = public
+barbican_endpoint_type = internal
 
 
 [cache]
-
-#
-# From nova.conf
+#
+# From oslo.cache
 #
 
 # Prefix for building the configuration dictionary for the cache region. This
@@ -3589,9 +3629,9 @@
 # with the same configuration name. (string value)
 #config_prefix = cache.oslo
 
-# Default TTL, in seconds, for any cached item in the dogpile.cache region. This
-# applies to any cached method that doesn't have an explicit cache expiration
-# time defined for it. (integer value)
+# Default TTL, in seconds, for any cached item in the dogpile.cache region.
+# This applies to any cached method that doesn't have an explicit cache
+# expiration time defined for it. (integer value)
 #expiration_time = 600
 
 # Cache backend module. For eventlet-based or environments with hundreds of
@@ -3614,6 +3654,7 @@
 # dogpile.cache.memory_pickle - <No description provided>
 # dogpile.cache.null - <No description provided>
 #backend = dogpile.cache.null
+backend = oslo_cache.memcache_pool
 
 # Arguments supplied to the backend module. Specify this option once per
 # argument to be passed to the dogpile.cache backend. Example format:
@@ -3626,17 +3667,19 @@
 #proxies =
 
 # Global toggle for caching. (boolean value)
-#enabled = false
-
-# Extra debugging from the cache backend (cache keys, get/set/delete/etc calls).
-# This is only really useful if you need to see the specific cache-backend
-# get/set/delete calls with the keys/values.  Typically this should be left set
-# to false. (boolean value)
+#enabled = true
+enabled = True
+
+# Extra debugging from the cache backend (cache keys, get/set/delete/etc
+# calls). This is only really useful if you need to see the specific cache-
+# backend get/set/delete calls with the keys/values.  Typically this should be
+# left set to false. (boolean value)
 #debug_cache_backend = false
 
 # Memcache servers in the format of "host:port". (dogpile.cache.memcache and
 # oslo_cache.memcache_pool backends only). (list value)
 #memcache_servers = localhost:11211
+memcache_servers =192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 
 # Number of seconds memcached server is considered dead before it is tried
 # again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
@@ -3660,8 +3703,8 @@
 #memcache_pool_connection_get_timeout = 10
 
 
+
 [cells]
-enable = False
 #
 # DEPRECATED: Cells options allow you to use cells v1 functionality in an
 # OpenStack deployment.
@@ -4199,7 +4242,7 @@
 #
 # * endpoint_template - Setting this option will override catalog_info
 #  (string value)
-#catalog_info = volumev3:cinderv3:publicURL
+catalog_info = volumev3:cinderv3:internalURL
 
 #
 # If this option is set then it will override service catalog lookup with
@@ -4227,7 +4270,7 @@
 #
 # * Any string representing region name
 #  (string value)
-#os_region_name = <None>
+os_region_name = RegionOne
 
 #
 # Number of times cinderclient should retry on any failed http call.
@@ -4257,62 +4300,40 @@
 # By default there is no availability zone restriction on volume attach.
 #  (boolean value)
 #cross_az_attach = true
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [cinder]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -4324,148 +4345,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [cinder]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
-
-
-[compute]
-
-#
-# From nova.conf
-#
-
-#
-# Enables reporting of build failures to the scheduler.
-#
-# Any nonzero value will enable sending build failure statistics to the
-# scheduler for use by the BuildFailureWeigher.
-#
-# Possible values:
-#
-# * Any positive integer enables reporting build failures.
-# * Zero to disable reporting build failures.
-#
-# Related options:
-#
-# * [filter_scheduler]/build_failure_weight_multiplier
-#
-#  (integer value)
-#consecutive_build_service_disable_threshold = 10
-
-#
-# Time to wait in seconds before resending an ACPI shutdown signal to
-# instances.
-#
-# The overall time to wait is set by ``shutdown_timeout``.
-#
-# Possible values:
-#
-# * Any integer greater than 0 in seconds
-#
-# Related options:
-#
-# * ``shutdown_timeout``
-#  (integer value)
-# Minimum value: 1
-#shutdown_retry_interval = 10
-
-#
-# Interval for updating nova-compute-side cache of the compute node resource
-# provider's aggregates and traits info.
-#
-# This option specifies the number of seconds between attempts to update a
-# provider's aggregates and traits information in the local cache of the compute
-# node.
-#
-# Possible values:
-#
-# * Any positive integer in seconds.
-#  (integer value)
-# Minimum value: 1
-#resource_provider_association_refresh = 300
-
-#
-# Defines which physical CPUs (pCPUs) will be used for best-effort guest vCPU
-# resources.
-#
-# Currently only used by libvirt driver to place guest emulator threads when
-# hw:emulator_threads_policy:share.
-#
-# ::
-#     cpu_shared_set = "4-12,^8,15"
-#  (string value)
-#cpu_shared_set = <None>
-
-#
-# Determine if the source compute host should wait for a ``network-vif-plugged``
-# event from the (neutron) networking service before starting the actual
-# transfer
-# of the guest to the destination compute host.
-#
-# Note that this option is read on the destination host of a live migration.
-# If you set this option the same on all of your compute hosts, which you should
-# do if you use the same networking backend universally, you do not have to
-# worry about this.
-#
-# Before starting the transfer of the guest, some setup occurs on the
-# destination
-# compute host, including plugging virtual interfaces. Depending on the
-# networking backend **on the destination host**, a ``network-vif-plugged``
-# event may be triggered and then received on the source compute host and the
-# source compute can wait for that event to ensure networking is set up on the
-# destination host before starting the guest transfer in the hypervisor.
-#
-# By default, this is False for two reasons:
-#
-# 1. Backward compatibility: deployments should test this out and ensure it
-# works
-#    for them before enabling it.
-#
-# 2. The compute service cannot reliably determine which types of virtual
-#    interfaces (``port.binding:vif_type``) will send ``network-vif-plugged``
-#    events without an accompanying port ``binding:host_id`` change.
-#    Open vSwitch and linuxbridge should be OK, but OpenDaylight is at least
-#    one known backend that will not currently work in this case, see bug
-#    https://launchpad.net/bugs/1755890 for more details.
-#
-# Possible values:
-#
-# * True: wait for ``network-vif-plugged`` events before starting guest transfer
-# * False: do not wait for ``network-vif-plugged`` events before starting guest
-#   transfer (this is how things have always worked before this option
-#   was introduced)
-#
-# Related options:
-#
-# * [DEFAULT]/vif_plugging_is_fatal: if ``live_migration_wait_for_vif_plug`` is
-#   True and ``vif_plugging_timeout`` is greater than 0, and a timeout is
-#   reached, the live migration process will fail with an error but the guest
-#   transfer will not have started to the destination host
-# * [DEFAULT]/vif_plugging_timeout: if ``live_migration_wait_for_vif_plug`` is
-#   True, this controls the amount of time to wait before timing out and either
-#   failing if ``vif_plugging_is_fatal`` is True, or simply continuing with the
-#   live migration
-#  (boolean value)
-#live_migration_wait_for_vif_plug = false
+username = nova
 
 
 [conductor]
@@ -4482,7 +4420,7 @@
 # Number of workers for OpenStack Conductor service. The default will be the
 # number of CPUs available.
 #  (integer value)
-#workers = <None>
+workers = 8
 
 
 [console]
@@ -4534,8 +4472,8 @@
 #token_ttl = 600
 
 
+
 [cors]
-
 #
 # From oslo.middleware
 #
@@ -4550,7 +4488,7 @@
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Service-Token
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -4558,14 +4496,13 @@
 # Indicate which methods can be used during the actual request. (list value)
 #allow_methods = GET,PUT,POST,DELETE,PATCH
 
-# Indicate which header field names may be used during the actual request. (list
-# value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id
+# Indicate which header field names may be used during the actual request.
+# (list value)
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
 
 
 [database]
-connection = sqlite:////var/lib/nova/nova.sqlite
-
 #
 # From oslo.db
 #
@@ -4583,14 +4520,14 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://nova:opnfv_secret@192.168.10.23/nova?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
-# the server configuration, set this to no value. Example: mysql_sql_mode=
+# default, overrides any server-set SQL mode. To use whatever SQL mode is set
+# by the server configuration, set this to no value. Example: mysql_sql_mode=
 # (string value)
 #mysql_sql_mode = TRADITIONAL
 
@@ -4607,9 +4544,10 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer
-# value)
+connection_recycle_time = 300
+
+# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 # This option is deprecated for removal.
@@ -4618,17 +4556,19 @@
 # sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
-# indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a value of
+# 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -4639,6 +4579,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -4655,8 +4596,8 @@
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean
-# value)
+# Enable the experimental use of database reconnect on connection lost.
+# (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
@@ -4678,14 +4619,6 @@
 # specify as param1=value1&param2=value2&... (string value)
 #connection_parameters =
 
-#
-# From oslo.db.concurrency
-#
-
-# Enable the experimental use of thread pooling for all DB API calls (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
-#use_tpool = false
 
 
 [devices]
@@ -4773,7 +4706,7 @@
 #  (integer value)
 # Minimum value: 1
 # Deprecated group/name - [DEFAULT]/scheduler_host_subset_size
-#host_subset_size = 1
+host_subset_size = 30
 
 #
 # The number of instances that can be actively performing IO on a host.
@@ -4863,7 +4796,8 @@
 # * enabled_filters
 #  (multi valued)
 # Deprecated group/name - [DEFAULT]/scheduler_available_filters
-#available_filters = nova.scheduler.filters.all_filters
+available_filters = nova.scheduler.filters.all_filters
+available_filters = nova.scheduler.filters.pci_passthrough_filter.PciPassthroughFilter
 
 #
 # Filters that the scheduler will use.
@@ -4888,7 +4822,7 @@
 #   exception will be raised.
 #  (list value)
 # Deprecated group/name - [DEFAULT]/scheduler_default_filters
-#enabled_filters = RetryFilter,AvailabilityZoneFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter
+enabled_filters = DifferentHostFilter,SameHostFilter,RetryFilter,AvailabilityZoneFilter,RamFilter,CoreFilter,DiskFilter,ComputeFilter,ComputeCapabilitiesFilter,ImagePropertiesFilter,ServerGroupAntiAffinityFilter,ServerGroupAffinityFilter,PciPassthroughFilter,NUMATopologyFilter,AggregateInstanceExtraSpecsFilter
 
 #
 # Weighers that the scheduler will use.
@@ -5266,7 +5200,7 @@
 # "scheme://hostname:port[/path]"
 #   (i.e. "http://10.0.1.0:9292" or "https://my.glance.server/image").
 #  (list value)
-#api_servers = <None>
+api_servers = http://192.168.10.35:9292
 
 #
 # Enable glance operation retries.
@@ -5316,7 +5250,7 @@
 # * Both enable_certificate_validation and default_trusted_certificate_ids
 #   below depend on this option being enabled.
 #  (boolean value)
-#verify_glance_signatures = false
+verify_glance_signatures = true
 
 # DEPRECATED:
 # Enable certificate validation for image signature verification.
@@ -5788,147 +5722,6 @@
 #iscsi_initiator_list =
 
 
-[ironic]
-#
-# Configuration options for Ironic driver (Bare Metal).
-# If using the Ironic driver following options must be set:
-# * auth_type
-# * auth_url
-# * project_name
-# * username
-# * password
-# * project_domain_id or project_domain_name
-# * user_domain_id or user_domain_name
-
-#
-# From nova.conf
-#
-
-# DEPRECATED: URL override for the Ironic API endpoint. (uri value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Endpoint lookup uses the service catalog via common keystoneauth1
-# Adapter configuration options. In the current release, api_endpoint will
-# override this behavior, but will be ignored and/or removed in a future
-# release. To achieve the same result, use the endpoint_override option instead.
-#api_endpoint = http://ironic.example.org:6385/
-
-#
-# The number of times to retry when a request conflicts.
-# If set to 0, only try once, no retries.
-#
-# Related options:
-#
-# * api_retry_interval
-#  (integer value)
-# Minimum value: 0
-#api_max_retries = 60
-
-#
-# The number of seconds to wait before retrying the request.
-#
-# Related options:
-#
-# * api_max_retries
-#  (integer value)
-# Minimum value: 0
-#api_retry_interval = 2
-
-# Timeout (seconds) to wait for node serial console state changed. Set to 0 to
-# disable timeout. (integer value)
-# Minimum value: 0
-#serial_console_state_timeout = 10
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [ironic]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# User ID (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [ironic]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# The default service_type for endpoint URL discovery. (string value)
-#service_type = baremetal
-
-# The default service_name for endpoint URL discovery. (string value)
-#service_name = <None>
-
-# List of interfaces, in order of preference, for endpoint URL. (list value)
-#valid_interfaces = internal,public
-
-# The default region_name for endpoint URL discovery. (string value)
-#region_name = <None>
-
-# Always use this endpoint URL for requests for this client. NOTE: The
-# unversioned endpoint should be specified here; to request a particular API
-# version, use the `version`, `min-version`, and/or `max-version` options.
-# (string value)
-# Deprecated group/name - [ironic]/api_endpoint
-#endpoint_override = <None>
 
 
 [key_manager]
@@ -6072,14 +5865,16 @@
 #
 
 # Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users. Unauthenticated
-# clients are redirected to this endpoint to authenticate. Although this
-# endpoint should ideally be unversioned, client support in the wild varies. If
-# you're using a versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -6092,9 +5887,10 @@
 # release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and
-# will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -6107,8 +5903,8 @@
 # value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with Identity API
-# Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
@@ -6132,10 +5928,11 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P release.
-# (string value)
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
@@ -6145,43 +5942,29 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
 
 # In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set to
-# -1 to disable caching completely. (integer value)
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
 #token_cache_time = 300
 
 # DEPRECATED: Determines the frequency at which the list of revoked tokens is
 # retrieved from the Identity service (in seconds). A high number of revocation
 # events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in the
-# Ocata release and will be removed in the P release. (integer value)
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every memcached server.
-# (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
 # (Optional) Socket timeout in seconds for communicating with a memcached
@@ -6207,11 +5990,11 @@
 
 # Used to control the use and type of token binding. Can be set to: "disabled"
 # to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it if
-# not. "strict" like "permissive" but if the bind type is unknown the token will
-# be rejected. "required" any form of token binding is needed to be allowed.
-# Finally the name of a binding method that must be present in tokens. (string
-# value)
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
 # DEPRECATED: If true, the revocation list will be checked for cached tokens.
@@ -6238,23 +6021,129 @@
 # A choice of roles that must be present in a service token. Service tokens are
 # allowed to request that an expired token can be used and so this check should
 # tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present. For
-# backwards compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens pass that
-# don't pass the service_token_roles check as valid. Setting this true will
-# become the default in a future release and should be enabled if possible.
-# (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = nova
 
 
 [libvirt]
@@ -6378,25 +6267,6 @@
 # * ``virt_type``: Influences what is used as default value here.
 #  (string value)
 #connection_uri =
-
-#
-# Algorithm used to hash the injected password.
-# Note that it must be supported by libc on the compute host
-# _and_ by libc inside *any guest image* that will be booted by this compute
-# host whith requested password injection.
-# In case the specified algorithm is not supported by libc on the compute host,
-# a fallback to DES algorithm will be performed.
-#
-# Related options:
-#
-# * ``inject_password``
-# * ``inject_partition``
-#  (string value)
-# Possible values:
-# SHA-512 - <No description provided>
-# SHA-256 - <No description provided>
-# MD5 - <No description provided>
-#inject_password_algorithm = MD5
 
 #
 # Allow the injection of an admin password for instance only at ``create`` and
@@ -6480,7 +6350,7 @@
 #   single partition image
 #  (integer value)
 # Minimum value: -2
-#inject_partition = -2
+inject_partition = -1
 
 # DEPRECATED:
 # Enable a mouse cursor within a graphical VNC or SPICE sessions.
@@ -7061,7 +6931,6 @@
 #
 # * virt.use_cow_images
 # * images_volume_group
-# * [workarounds]/ensure_libvirt_rbd_instance_dir_cleanup
 #  (string value)
 # Possible values:
 # raw - <No description provided>
@@ -7771,7 +7640,7 @@
 #
 # * metadata_proxy_shared_secret
 #  (boolean value)
-#service_metadata_proxy = false
+service_metadata_proxy = true
 
 #
 # This option holds the shared secret string used to validate proxy requests to
@@ -7782,7 +7651,7 @@
 #
 # * service_metadata_proxy
 #  (string value)
-#metadata_proxy_shared_secret =
+metadata_proxy_shared_secret = opnfv_secret
 
 # PEM encoded Certificate Authority to use when verifying HTTPs connections.
 # (string value)
@@ -7798,7 +7667,7 @@
 #insecure = false
 
 # Timeout value for http requests (integer value)
-#timeout = <None>
+timeout = 300
 
 # Collect per-API call timing information. (boolean value)
 #collect_timing = false
@@ -7808,13 +7677,13 @@
 
 # Authentication type to load (string value)
 # Deprecated group/name - [neutron]/auth_plugin
-#auth_type = <None>
+auth_type = v3password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
 # Authentication URL (string value)
-#auth_url = <None>
+auth_url = http://192.168.10.35:35357/v3
 
 # Scope for system operations (string value)
 #system_scope = <None>
@@ -7835,7 +7704,7 @@
 #project_domain_id = <None>
 
 # Domain name containing project (string value)
-#project_domain_name = <None>
+project_domain_name = Default
 
 # Trust ID (string value)
 #trust_id = <None>
@@ -7861,7 +7730,7 @@
 #user_domain_id = <None>
 
 # User's domain name (string value)
-#user_domain_name = <None>
+user_domain_name = Default
 
 # User's password (string value)
 #password = <None>
@@ -7889,6 +7758,11 @@
 # version, use the `version`, `min-version`, and/or `max-version` options.
 # (string value)
 #endpoint_override = <None>
+
+password = opnfv_secret
+project_name = service
+username = neutron
+region_name = RegionOne
 
 
 [notifications]
@@ -7925,6 +7799,7 @@
 # vm_state - <No description provided>
 # vm_and_task_state - <No description provided>
 #notify_on_state_change = <None>
+notify_on_state_change = vm_and_task_state
 
 # Default notification level for outgoing notifications. (string value)
 # Possible values:
@@ -8027,296 +7902,16 @@
 #lock_path = <None>
 
 
-[oslo_messaging_amqp]
-
+[oslo_messaging_notifications]
 #
 # From oslo.messaging
 #
 
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string
-# value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-robin
-# fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point
-# value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging,
-# messagingv2, routing, log, test, noop (multi valued)
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
 # Deprecated group/name - [DEFAULT]/notification_driver
 #driver =
+driver = messagingv2
 
 # A URL representing the messaging driver to use for notifications. If not set,
 # we fall back to the same configuration used for RPC. (string value)
@@ -8332,10 +7927,7 @@
 # to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
 # (integer value)
 #retry = -1
-
-
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
@@ -8352,24 +7944,6 @@
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
 
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
 #kombu_reconnect_delay = 1.0
@@ -8384,8 +7958,8 @@
 #kombu_missing_consumer_retry_timeout = 60
 
 # Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than one
-# RabbitMQ node is provided in config. (string value)
+# currently connected to becomes unavailable. Takes effect only if more than
+# one RabbitMQ node is provided in config. (string value)
 # Possible values:
 # round-robin - <No description provided>
 # shuffle - <No description provided>
@@ -8398,7 +7972,8 @@
 # Reason: Replaced by [DEFAULT]/transport_url
 #rabbit_host = localhost
 
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
+# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
+# value)
 # Minimum value: 0
 # Maximum value: 65535
 # This option is deprecated for removal.
@@ -8456,20 +8031,20 @@
 
 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
 # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue. If
-# you just want to make sure that all queues (except those with auto-generated
-# names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA
-# '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
+# is no longer controlled by the x-ha-policy argument when declaring a queue.
+# If you just want to make sure that all queues (except those with auto-
+# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
+# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
 #rabbit_ha_queues = false
 
 # Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically deleted.
-# The parameter affects only reply and fanout queues. (integer value)
+# Queues which are unused for the duration of the TTL are automatically
+# deleted. The parameter affects only reply and fanout queues. (integer value)
 # Minimum value: 1
 #rabbit_transient_queues_ttl = 1800
 
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited
-# messages. (integer value)
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
 #rabbit_qos_prefetch_count = 0
 
 # Number of seconds after which the Rabbit broker is considered down if
@@ -8477,163 +8052,16 @@
 # value)
 #heartbeat_timeout_threshold = 60
 
-# How often times during the heartbeat_timeout_threshold we check the heartbeat.
-# (integer value)
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
 #heartbeat_rate = 2
 
 
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger period.
-# The value of 0 specifies no linger period. Pending messages shall be discarded
-# immediately when the socket is closed. Positive values specify an upper bound
-# for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target (
-# < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to skip
-# any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value and
-# 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0) means
-# to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not
-# tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
+
+[oslo_policy]
 
 
 [oslo_middleware]
-
 #
 # From oslo.middleware
 #
@@ -8644,8 +8072,8 @@
 #max_request_body_size = 114688
 
 # DEPRECATED: The HTTP Header that will be used to determine what the original
-# request protocol scheme was, even if it was hidden by a SSL termination proxy.
-# (string value)
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #secure_proxy_ssl_header = X-Forwarded-Proto
@@ -8653,53 +8081,8 @@
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies.
-# If ``True``, the scope of the token used in the request is compared to the
-# ``scope_types`` of the policy being enforced. If the scopes do not match, an
-# ``InvalidScope`` exception will be raised. If ``False``, a message will be
-# logged informing operators that policies are being invoked with mismatching
-# scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
+enable_proxy_headers_parsing = True
+
 
 
 [pci]
@@ -8831,7 +8214,6 @@
 
 
 [placement]
-os_region_name = openstack
 
 #
 # From nova.conf
@@ -8869,61 +8251,42 @@
 #  (string value)
 #incomplete_consumer_user_id = 00000000-0000-0000-0000-000000000000
 
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# List of interfaces, in order of preference, for endpoint URL. (list value)
+valid_interfaces = internal
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [placement]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -8935,45 +8298,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [placement]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
-
-# The default service_type for endpoint URL discovery. (string value)
-#service_type = placement
-
-# The default service_name for endpoint URL discovery. (string value)
-#service_name = <None>
-
-# List of interfaces, in order of preference, for endpoint URL. (list value)
-#valid_interfaces = internal,public
-
-# The default region_name for endpoint URL discovery. (string value)
-#region_name = <None>
-
-# Always use this endpoint URL for requests for this client. NOTE: The
-# unversioned endpoint should be specified here; to request a particular API
-# version, use the `version`, `min-version`, and/or `max-version` options.
-# (string value)
-#endpoint_override = <None>
+username = nova
 
 
 [placement_database]
@@ -9891,62 +9274,41 @@
 # middleware.
 #  (boolean value)
 #send_service_user_token = false
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+send_service_user_token = True
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_user]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-#project_id = <None>
-
-# Project name to scope to (string value)
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
+auth_url = http://192.168.10.35:5000
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
@@ -9958,27 +9320,65 @@
 # (string value)
 #default_domain_name = <None>
 
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
 # User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [service_user]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
+username = nova
 
 
 [spice]
@@ -10049,6 +9449,7 @@
 #   and port where the ``nova-spicehtml5proxy`` service is listening.
 #  (uri value)
 #html5proxy_base_url = http://127.0.0.1:6082/spice_auto.html
+html5proxy_base_url = https://100.64.200.101:6080/spice_auto.html
 
 #
 # The  address where the SPICE server running on the instances should listen.
@@ -10317,15 +9718,6 @@
 # root token for vault (string value)
 #root_token_id = <None>
 
-# AppRole role_id for authentication with vault (string value)
-#approle_role_id = <None>
-
-# AppRole secret_id for authentication with vault (string value)
-#approle_secret_id = <None>
-
-# Mountpoint of KV store in Vault to use, for example: secret (string value)
-#kv_mountpoint = secret
-
 # Use this endpoint to connect to Vault, for example: "http://127.0.0.1:8200"
 # (string value)
 #vault_url = http://127.0.0.1:8200
@@ -10433,287 +9825,6 @@
 
 # Tenant Name (string value)
 #tenant_name = <None>
-
-
-[vmware]
-#
-# Related options:
-# Following options must be set in order to launch VMware-based
-# virtual machines.
-#
-# * compute_driver: Must use vmwareapi.VMwareVCDriver.
-# * vmware.host_username
-# * vmware.host_password
-# * vmware.cluster_name
-
-#
-# From nova.conf
-#
-
-#
-# This option specifies the physical ethernet adapter name for VLAN
-# networking.
-#
-# Set the vlan_interface configuration option to match the ESX host
-# interface that handles VLAN-tagged VM traffic.
-#
-# Possible values:
-#
-# * Any valid string representing VLAN interface name
-#  (string value)
-#vlan_interface = vmnic0
-
-#
-# This option should be configured only when using the NSX-MH Neutron
-# plugin. This is the name of the integration bridge on the ESXi server
-# or host. This should not be set for any other Neutron plugin. Hence
-# the default value is not set.
-#
-# Possible values:
-#
-# * Any valid string representing the name of the integration bridge
-#  (string value)
-#integration_bridge = <None>
-
-#
-# Set this value if affected by an increased network latency causing
-# repeated characters when typing in a remote console.
-#  (integer value)
-# Minimum value: 0
-#console_delay_seconds = <None>
-
-#
-# Identifies the remote system where the serial port traffic will
-# be sent.
-#
-# This option adds a virtual serial port which sends console output to
-# a configurable service URI. At the service URI address there will be
-# virtual serial port concentrator that will collect console logs.
-# If this is not set, no serial ports will be added to the created VMs.
-#
-# Possible values:
-#
-# * Any valid URI
-#  (string value)
-#serial_port_service_uri = <None>
-
-#
-# Identifies a proxy service that provides network access to the
-# serial_port_service_uri.
-#
-# Possible values:
-#
-# * Any valid URI (The scheme is 'telnet' or 'telnets'.)
-#
-# Related options:
-# This option is ignored if serial_port_service_uri is not specified.
-# * serial_port_service_uri
-#  (uri value)
-#serial_port_proxy_uri = <None>
-
-#
-# Specifies the directory where the Virtual Serial Port Concentrator is
-# storing console log files. It should match the 'serial_log_dir' config
-# value of VSPC.
-#  (string value)
-#serial_log_dir = /opt/vmware/vspc
-
-#
-# Hostname or IP address for connection to VMware vCenter host. (host address
-# value)
-#host_ip = <None>
-
-# Port for connection to VMware vCenter host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#host_port = 443
-
-# Username for connection to VMware vCenter host. (string value)
-#host_username = <None>
-
-# Password for connection to VMware vCenter host. (string value)
-#host_password = <None>
-
-#
-# Specifies the CA bundle file to be used in verifying the vCenter
-# server certificate.
-#  (string value)
-#ca_file = <None>
-
-#
-# If true, the vCenter server certificate is not verified. If false,
-# then the default CA truststore is used for verification.
-#
-# Related options:
-# * ca_file: This option is ignored if "ca_file" is set.
-#  (boolean value)
-#insecure = false
-
-# Name of a VMware Cluster ComputeResource. (string value)
-#cluster_name = <None>
-
-#
-# Regular expression pattern to match the name of datastore.
-#
-# The datastore_regex setting specifies the datastores to use with
-# Compute. For example, datastore_regex="nas.*" selects all the data
-# stores that have a name starting with "nas".
-#
-# NOTE: If no regex is given, it just picks the datastore with the
-# most freespace.
-#
-# Possible values:
-#
-# * Any matching regular expression to a datastore must be given
-#  (string value)
-#datastore_regex = <None>
-
-#
-# Time interval in seconds to poll remote tasks invoked on
-# VMware VC server.
-#  (floating point value)
-#task_poll_interval = 0.5
-
-#
-# Number of times VMware vCenter server API must be retried on connection
-# failures, e.g. socket error, etc.
-#  (integer value)
-# Minimum value: 0
-#api_retry_count = 10
-
-#
-# This option specifies VNC starting port.
-#
-# Every VM created by ESX host has an option of enabling VNC client
-# for remote connection. Above option 'vnc_port' helps you to set
-# default starting port for the VNC client.
-#
-# Possible values:
-#
-# * Any valid port number within 5900 -(5900 + vnc_port_total)
-#
-# Related options:
-# Below options should be set to enable VNC client.
-# * vnc.enabled = True
-# * vnc_port_total
-#  (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#vnc_port = 5900
-
-#
-# Total number of VNC ports.
-#  (integer value)
-# Minimum value: 0
-#vnc_port_total = 10000
-
-#
-# Keymap for VNC.
-#
-# The keyboard mapping (keymap) determines which keyboard layout a VNC
-# session should use by default.
-#
-# Possible values:
-#
-# * A keyboard layout which is supported by the underlying hypervisor on
-#   this node. This is usually an 'IETF language tag' (for example
-#   'en-us').
-#  (string value)
-#vnc_keymap = en-us
-
-#
-# This option enables/disables the use of linked clone.
-#
-# The ESX hypervisor requires a copy of the VMDK file in order to boot
-# up a virtual machine. The compute driver must download the VMDK via
-# HTTP from the OpenStack Image service to a datastore that is visible
-# to the hypervisor and cache it. Subsequent virtual machines that need
-# the VMDK use the cached version and don't have to copy the file again
-# from the OpenStack Image service.
-#
-# If set to false, even with a cached VMDK, there is still a copy
-# operation from the cache location to the hypervisor file directory
-# in the shared datastore. If set to true, the above copy operation
-# is avoided as it creates copy of the virtual machine that shares
-# virtual disks with its parent VM.
-#  (boolean value)
-#use_linked_clone = true
-
-#
-# This option sets the http connection pool size
-#
-# The connection pool size is the maximum number of connections from nova to
-# vSphere.  It should only be increased if there are warnings indicating that
-# the connection pool is full, otherwise, the default should suffice.
-#  (integer value)
-# Minimum value: 10
-#connection_pool_size = 10
-
-#
-# This option enables or disables storage policy based placement
-# of instances.
-#
-# Related options:
-#
-# * pbm_default_policy
-#  (boolean value)
-#pbm_enabled = false
-
-#
-# This option specifies the PBM service WSDL file location URL.
-#
-# Setting this will disable storage policy based placement
-# of instances.
-#
-# Possible values:
-#
-# * Any valid file path
-#   e.g file:///opt/SDK/spbm/wsdl/pbmService.wsdl
-#  (string value)
-#pbm_wsdl_location = <None>
-
-#
-# This option specifies the default policy to be used.
-#
-# If pbm_enabled is set and there is no defined storage policy for the
-# specific request, then this policy will be used.
-#
-# Possible values:
-#
-# * Any valid storage policy such as VSAN default storage policy
-#
-# Related options:
-#
-# * pbm_enabled
-#  (string value)
-#pbm_default_policy = <None>
-
-#
-# This option specifies the limit on the maximum number of objects to
-# return in a single result.
-#
-# A positive value will cause the operation to suspend the retrieval
-# when the count of objects reaches the specified limit. The server may
-# still limit the count to something less than the configured value.
-# Any remaining objects may be retrieved with additional requests.
-#  (integer value)
-# Minimum value: 0
-#maximum_objects = 100
-
-#
-# This option adds a prefix to the folder where cached images are stored
-#
-# This is not the full path - just a folder prefix. This should only be
-# used when a datastore cache is shared between compute nodes.
-#
-# Note: This should only be used when the compute nodes are running on same
-# host or they have a shared file system.
-#
-# Possible values:
-#
-# * Any string representing the cache prefix to the folder
-#  (string value)
-#cache_prefix = <None>
 
 
 [vnc]
@@ -10757,7 +9868,7 @@
 # keyboards. You should instead use a VNC client that supports Extended Key
 # Event
 # messages, such as noVNC 1.0.0. Refer to bug #1682020 for more information.
-#keymap = <None>
+keymap = en-us
 
 #
 # The IP address or hostname on which an instance should listen to for
@@ -10765,20 +9876,7 @@
 #  (host address value)
 # Deprecated group/name - [DEFAULT]/vncserver_listen
 # Deprecated group/name - [vnc]/vncserver_listen
-#server_listen = 127.0.0.1
-
-#
-# Private, internal IP address or hostname of VNC console proxy.
-#
-# The VNC proxy is an OpenStack component that enables compute service
-# users to access their instances through VNC clients.
-#
-# This option sets the private address to which proxy clients, such as
-# ``nova-xvpvncproxy``, should connect to.
-#  (host address value)
-# Deprecated group/name - [DEFAULT]/vncserver_proxyclient_address
-# Deprecated group/name - [vnc]/vncserver_proxyclient_address
-#server_proxyclient_address = 127.0.0.1
+server_listen = 192.168.10.37
 
 #
 # Public address of noVNC VNC console proxy.
@@ -10799,7 +9897,7 @@
 # * novncproxy_host
 # * novncproxy_port
 #  (uri value)
-#novncproxy_base_url = http://127.0.0.1:6080/vnc_auto.html
+novncproxy_base_url = https://100.64.200.101:6080/vnc_auto.html
 
 #
 # IP address or hostname that the XVP VNC console proxy should bind to.
@@ -10876,7 +9974,7 @@
 # * novncproxy_port
 # * novncproxy_base_url
 #  (string value)
-#novncproxy_host = 0.0.0.0
+novncproxy_host = 192.168.10.37
 
 #
 # Port that the noVNC console proxy should bind to.
@@ -10895,64 +9993,7 @@
 #  (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#novncproxy_port = 6080
-
-#
-# The authentication schemes to use with the compute node.
-#
-# Control what RFB authentication schemes are permitted for connections between
-# the proxy and the compute host. If multiple schemes are enabled, the first
-# matching scheme will be used, thus the strongest schemes should be listed
-# first.
-#
-# Possible values:
-#
-# * ``none``: allow connection without authentication
-# * ``vencrypt``: use VeNCrypt authentication scheme
-#
-# Related options:
-#
-# * ``[vnc]vencrypt_client_key``, ``[vnc]vencrypt_client_cert``: must also be
-# set
-#  (list value)
-#auth_schemes = none
-
-# The path to the client certificate PEM file (for x509)
-#
-# The fully qualified path to a PEM file containing the private key which the
-# VNC
-# proxy server presents to the compute node during VNC authentication.
-#
-# Related options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-# * ``vnc.vencrypt_client_cert``: must also be set
-#  (string value)
-#vencrypt_client_key = <None>
-
-# The path to the client key file (for x509)
-#
-# The fully qualified path to a PEM file containing the x509 certificate which
-# the VNC proxy server presents to the compute node during VNC authentication.
-#
-# Realted options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-# * ``vnc.vencrypt_client_key``: must also be set
-#  (string value)
-#vencrypt_client_cert = <None>
-
-# The path to the CA certificate PEM file
-#
-# The fully qualified path to a PEM file containing one or more x509
-# certificates
-# for the certificate authorities used by the compute node VNC server.
-#
-# Related options:
-#
-# * ``vnc.auth_schemes``: must include ``vencrypt``
-#  (string value)
-#vencrypt_ca_certs = <None>
+novncproxy_port = 6080
 
 
 [workarounds]
@@ -11009,7 +10050,7 @@
 # * False: Live snapshots are always used when snapshotting (as long as
 #   there is a new enough libvirt and the backend storage supports it)
 #  (boolean value)
-#disable_libvirt_livesnapshot = false
+disable_libvirt_livesnapshot = true
 
 #
 # Enable handling of events emitted from compute drivers.
@@ -11135,60 +10176,6 @@
 # See related bug https://bugs.launchpad.net/nova/+bug/1796920 for more details.
 #  (boolean value)
 #report_ironic_standard_resource_class_inventory = true
-
-#
-# Enable live migration of instances with NUMA topologies.
-#
-# Live migration of instances with NUMA topologies is disabled by default
-# when using the libvirt driver. This includes live migration of instances with
-# CPU pinning or hugepages. CPU pinning and huge page information for such
-# instances is not currently re-calculated, as noted in `bug #1289064`_.  This
-# means that if instances were already present on the destination host, the
-# migrated instance could be placed on the same dedicated cores as these
-# instances or use hugepages allocated for another instance. Alternately, if the
-# host platforms were not homogeneous, the instance could be assigned to
-# non-existent cores or be inadvertently split across host NUMA nodes.
-#
-# Despite these known issues, there may be cases where live migration is
-# necessary. By enabling this option, operators that are aware of the issues and
-# are willing to manually work around them can enable live migration support for
-# these instances.
-#
-# Related options:
-#
-# * ``compute_driver``: Only the libvirt driver is affected.
-#
-# .. _bug #1289064: https://bugs.launchpad.net/nova/+bug/1289064
-#  (boolean value)
-#enable_numa_live_migration = false
-
-#
-# Ensure the instance directory is removed during clean up when using rbd.
-#
-# When enabled this workaround will ensure that the instance directory is always
-# removed during cleanup on hosts using ``[libvirt]/images_type=rbd``. This
-# avoids the following bugs with evacuation and revert resize clean up that lead
-# to the instance directory remaining on the host:
-#
-# https://bugs.launchpad.net/nova/+bug/1414895
-#
-# https://bugs.launchpad.net/nova/+bug/1761062
-#
-# Both of these bugs can then result in ``DestinationDiskExists`` errors being
-# raised if the instances ever attempt to return to the host.
-#
-# .. warning:: Operators will need to ensure that the instance directory itself,
-#   specified by ``[DEFAULT]/instances_path``, is not shared between computes
-#   before enabling this workaround otherwise the console.log, kernels, ramdisks
-#   and any additional files being used by the running instance will be lost.
-#
-# Related options:
-#
-# * ``compute_driver`` (libvirt)
-# * ``[libvirt]/images_type`` (rbd)
-# * ``instances_path``
-#  (boolean value)
-#ensure_libvirt_rbd_instance_dir_cleanup = false
 
 
 [wsgi]

2019-05-09 14:29:33,401 [salt.state       :1951][INFO    ][15777] Completed state [/etc/nova/nova.conf] at time 14:29:33.401724 duration_in_ms=972.578
2019-05-09 14:29:33,402 [salt.state       :1780][INFO    ][15777] Running state [nova-manage api_db sync] at time 14:29:33.402827
2019-05-09 14:29:33,403 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [nova-manage api_db sync]
2019-05-09 14:29:33,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command '/bin/false' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:29:33,540 [salt.state       :300 ][INFO    ][15777] onlyif execution failed
2019-05-09 14:29:33,540 [salt.state       :1951][INFO    ][15777] Completed state [nova-manage api_db sync] at time 14:29:33.540597 duration_in_ms=137.77
2019-05-09 14:29:33,542 [salt.state       :1780][INFO    ][15777] Running state [nova-manage cell_v2 map_cell0] at time 14:29:33.542136
2019-05-09 14:29:33,542 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [nova-manage cell_v2 map_cell0]
2019-05-09 14:29:33,543 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command 'nova-manage cell_v2 map_cell0' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:29:37,512 [salt.state       :300 ][INFO    ][15777] {'pid': 19927, 'retcode': 0, 'stderr': '', 'stdout': 'Cell0 is already setup'}
2019-05-09 14:29:37,512 [salt.state       :1951][INFO    ][15777] Completed state [nova-manage cell_v2 map_cell0] at time 14:29:37.512803 duration_in_ms=3970.667
2019-05-09 14:29:37,514 [salt.state       :1780][INFO    ][15777] Running state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 14:29:37.514569
2019-05-09 14:29:37,514 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [nova-manage cell_v2 create_cell --name=cell1 --verbose]
2019-05-09 14:29:37,515 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command 'nova-manage cell_v2 list_cells | grep cell1' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:29:41,682 [salt.state       :300 ][INFO    ][15777] unless execution succeeded
2019-05-09 14:29:41,683 [salt.state       :1951][INFO    ][15777] Completed state [nova-manage cell_v2 create_cell --name=cell1 --verbose] at time 14:29:41.683206 duration_in_ms=4168.635
2019-05-09 14:29:41,685 [salt.state       :1780][INFO    ][15777] Running state [nova-manage db sync] at time 14:29:41.685841
2019-05-09 14:29:41,686 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [nova-manage db sync]
2019-05-09 14:29:41,688 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command '/bin/false' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:29:41,798 [salt.state       :300 ][INFO    ][15777] onlyif execution failed
2019-05-09 14:29:41,798 [salt.state       :1951][INFO    ][15777] Completed state [nova-manage db sync] at time 14:29:41.798858 duration_in_ms=113.018
2019-05-09 14:29:42,473 [salt.state       :1780][INFO    ][15777] Running state [/etc/nova/api-paste.ini] at time 14:29:42.473666
2019-05-09 14:29:42,474 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/nova/api-paste.ini]
2019-05-09 14:29:42,499 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/files/rocky/api-paste.ini.Debian'
2019-05-09 14:29:42,836 [salt.state       :300 ][INFO    ][15777] File changed:
--- 
+++ 
@@ -68,7 +68,6 @@
 
 [app:oscomputeversionapp]
 paste.app_factory = nova.api.openstack.compute.versions:Versions.factory
-
 ##########
 # Shared #
 ##########

2019-05-09 14:29:42,839 [salt.state       :1951][INFO    ][15777] Completed state [/etc/nova/api-paste.ini] at time 14:29:42.839345 duration_in_ms=365.676
2019-05-09 14:29:42,840 [salt.state       :1780][INFO    ][15777] Running state [/etc/default/nova-conductor] at time 14:29:42.840904
2019-05-09 14:29:42,841 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/default/nova-conductor]
2019-05-09 14:29:42,861 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/files/default'
2019-05-09 14:29:42,868 [salt.state       :300 ][INFO    ][15777] File changed:
New file
2019-05-09 14:29:42,869 [salt.state       :1951][INFO    ][15777] Completed state [/etc/default/nova-conductor] at time 14:29:42.869075 duration_in_ms=28.171
2019-05-09 14:29:42,869 [salt.state       :1780][INFO    ][15777] Running state [/etc/default/nova-api] at time 14:29:42.869714
2019-05-09 14:29:42,870 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/default/nova-api]
2019-05-09 14:29:42,889 [salt.state       :300 ][INFO    ][15777] File changed:
New file
2019-05-09 14:29:42,889 [salt.state       :1951][INFO    ][15777] Completed state [/etc/default/nova-api] at time 14:29:42.889942 duration_in_ms=20.227
2019-05-09 14:29:42,890 [salt.state       :1780][INFO    ][15777] Running state [/etc/default/nova-consoleauth] at time 14:29:42.890599
2019-05-09 14:29:42,890 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/default/nova-consoleauth]
2019-05-09 14:29:42,912 [salt.state       :300 ][INFO    ][15777] File changed:
New file
2019-05-09 14:29:42,912 [salt.state       :1951][INFO    ][15777] Completed state [/etc/default/nova-consoleauth] at time 14:29:42.912359 duration_in_ms=21.759
2019-05-09 14:29:42,913 [salt.state       :1780][INFO    ][15777] Running state [/etc/default/nova-scheduler] at time 14:29:42.913040
2019-05-09 14:29:42,913 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/default/nova-scheduler]
2019-05-09 14:29:42,934 [salt.state       :300 ][INFO    ][15777] File changed:
New file
2019-05-09 14:29:42,934 [salt.state       :1951][INFO    ][15777] Completed state [/etc/default/nova-scheduler] at time 14:29:42.934730 duration_in_ms=21.69
2019-05-09 14:29:42,935 [salt.state       :1780][INFO    ][15777] Running state [/etc/default/nova-novncproxy] at time 14:29:42.935599
2019-05-09 14:29:42,936 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/default/nova-novncproxy]
2019-05-09 14:29:42,956 [salt.state       :300 ][INFO    ][15777] File changed:
New file
2019-05-09 14:29:42,957 [salt.state       :1951][INFO    ][15777] Completed state [/etc/default/nova-novncproxy] at time 14:29:42.957018 duration_in_ms=21.419
2019-05-09 14:29:42,959 [salt.state       :1780][INFO    ][15777] Running state [nova-conductor] at time 14:29:42.959565
2019-05-09 14:29:42,960 [salt.state       :1813][INFO    ][15777] Executing state service.running for [nova-conductor]
2019-05-09 14:29:42,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'status', 'nova-conductor.service', '-n', '0'] in directory '/root'
2019-05-09 14:29:43,003 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2019-05-09 14:29:43,039 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'nova-conductor.service'] in directory '/root'
2019-05-09 14:29:43,071 [salt.state       :300 ][INFO    ][15777] The service nova-conductor is already running
2019-05-09 14:29:43,073 [salt.state       :1951][INFO    ][15777] Completed state [nova-conductor] at time 14:29:43.073139 duration_in_ms=113.571
2019-05-09 14:29:43,074 [salt.state       :1780][INFO    ][15777] Running state [nova-conductor] at time 14:29:43.074344
2019-05-09 14:29:43,075 [salt.state       :1813][INFO    ][15777] Executing state service.mod_watch for [nova-conductor]
2019-05-09 14:29:43,078 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-conductor.service'] in directory '/root'
2019-05-09 14:29:43,117 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-conductor.service'] in directory '/root'
2019-05-09 14:29:43,536 [salt.state       :300 ][INFO    ][15777] {'nova-conductor': True}
2019-05-09 14:29:43,537 [salt.state       :1951][INFO    ][15777] Completed state [nova-conductor] at time 14:29:43.537365 duration_in_ms=463.02
2019-05-09 14:29:43,543 [salt.state       :1780][INFO    ][15777] Running state [nova-api] at time 14:29:43.543468
2019-05-09 14:29:43,544 [salt.state       :1813][INFO    ][15777] Executing state service.running for [nova-api]
2019-05-09 14:29:43,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'status', 'nova-api.service', '-n', '0'] in directory '/root'
2019-05-09 14:29:43,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2019-05-09 14:29:43,590 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'nova-api.service'] in directory '/root'
2019-05-09 14:29:43,620 [salt.state       :300 ][INFO    ][15777] The service nova-api is already running
2019-05-09 14:29:43,621 [salt.state       :1951][INFO    ][15777] Completed state [nova-api] at time 14:29:43.621322 duration_in_ms=77.852
2019-05-09 14:29:43,622 [salt.state       :1780][INFO    ][15777] Running state [nova-api] at time 14:29:43.622077
2019-05-09 14:29:43,622 [salt.state       :1813][INFO    ][15777] Executing state service.mod_watch for [nova-api]
2019-05-09 14:29:43,624 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-api.service'] in directory '/root'
2019-05-09 14:29:43,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-api.service'] in directory '/root'
2019-05-09 14:29:43,990 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509142943981015
2019-05-09 14:29:44,004 [salt.minion      :1432][INFO    ][20126] Starting a new job with PID 20126
2019-05-09 14:29:44,055 [salt.minion      :1711][INFO    ][20126] Returning information for job: 20190509142943981015
2019-05-09 14:29:45,062 [salt.state       :300 ][INFO    ][15777] {'nova-api': True}
2019-05-09 14:29:45,064 [salt.state       :1951][INFO    ][15777] Completed state [nova-api] at time 14:29:45.063898 duration_in_ms=1441.819
2019-05-09 14:29:45,073 [salt.state       :1780][INFO    ][15777] Running state [nova-consoleauth] at time 14:29:45.073308
2019-05-09 14:29:45,074 [salt.state       :1813][INFO    ][15777] Executing state service.running for [nova-consoleauth]
2019-05-09 14:29:45,076 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'status', 'nova-consoleauth.service', '-n', '0'] in directory '/root'
2019-05-09 14:29:45,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2019-05-09 14:29:45,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2019-05-09 14:29:45,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'nova-consoleauth.service'] in directory '/root'
2019-05-09 14:29:45,226 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-consoleauth.service'] in directory '/root'
2019-05-09 14:29:45,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2019-05-09 14:29:45,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'nova-consoleauth.service'] in directory '/root'
2019-05-09 14:29:45,306 [salt.state       :300 ][INFO    ][15777] {'nova-consoleauth': True}
2019-05-09 14:29:45,306 [salt.state       :1951][INFO    ][15777] Completed state [nova-consoleauth] at time 14:29:45.306736 duration_in_ms=233.428
2019-05-09 14:29:45,311 [salt.state       :1780][INFO    ][15777] Running state [nova-scheduler] at time 14:29:45.311122
2019-05-09 14:29:45,311 [salt.state       :1813][INFO    ][15777] Executing state service.running for [nova-scheduler]
2019-05-09 14:29:45,312 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'status', 'nova-scheduler.service', '-n', '0'] in directory '/root'
2019-05-09 14:29:45,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2019-05-09 14:29:45,351 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'nova-scheduler.service'] in directory '/root'
2019-05-09 14:29:45,362 [salt.state       :300 ][INFO    ][15777] The service nova-scheduler is already running
2019-05-09 14:29:45,363 [salt.state       :1951][INFO    ][15777] Completed state [nova-scheduler] at time 14:29:45.362982 duration_in_ms=51.859
2019-05-09 14:29:45,363 [salt.state       :1780][INFO    ][15777] Running state [nova-scheduler] at time 14:29:45.363248
2019-05-09 14:29:45,363 [salt.state       :1813][INFO    ][15777] Executing state service.mod_watch for [nova-scheduler]
2019-05-09 14:29:45,364 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-scheduler.service'] in directory '/root'
2019-05-09 14:29:45,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-scheduler.service'] in directory '/root'
2019-05-09 14:29:45,559 [salt.state       :300 ][INFO    ][15777] {'nova-scheduler': True}
2019-05-09 14:29:45,560 [salt.state       :1951][INFO    ][15777] Completed state [nova-scheduler] at time 14:29:45.559940 duration_in_ms=196.692
2019-05-09 14:29:45,563 [salt.state       :1780][INFO    ][15777] Running state [nova-novncproxy] at time 14:29:45.563098
2019-05-09 14:29:45,563 [salt.state       :1813][INFO    ][15777] Executing state service.running for [nova-novncproxy]
2019-05-09 14:29:45,564 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'status', 'nova-novncproxy.service', '-n', '0'] in directory '/root'
2019-05-09 14:29:45,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2019-05-09 14:29:45,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'nova-novncproxy.service'] in directory '/root'
2019-05-09 14:29:45,618 [salt.state       :300 ][INFO    ][15777] The service nova-novncproxy is already running
2019-05-09 14:29:45,619 [salt.state       :1951][INFO    ][15777] Completed state [nova-novncproxy] at time 14:29:45.619070 duration_in_ms=55.972
2019-05-09 14:29:45,619 [salt.state       :1780][INFO    ][15777] Running state [nova-novncproxy] at time 14:29:45.619526
2019-05-09 14:29:45,620 [salt.state       :1813][INFO    ][15777] Executing state service.mod_watch for [nova-novncproxy]
2019-05-09 14:29:45,621 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'nova-novncproxy.service'] in directory '/root'
2019-05-09 14:29:45,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'nova-novncproxy.service'] in directory '/root'
2019-05-09 14:29:45,797 [salt.state       :300 ][INFO    ][15777] {'nova-novncproxy': True}
2019-05-09 14:29:45,797 [salt.state       :1951][INFO    ][15777] Completed state [nova-novncproxy] at time 14:29:45.797792 duration_in_ms=178.266
2019-05-09 14:29:45,799 [salt.state       :1780][INFO    ][15777] Running state [nova-manage db online_data_migrations] at time 14:29:45.799120
2019-05-09 14:29:45,799 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [nova-manage db online_data_migrations]
2019-05-09 14:29:45,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command '/bin/false' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:29:45,935 [salt.state       :300 ][INFO    ][15777] onlyif execution failed
2019-05-09 14:29:45,935 [salt.state       :1951][INFO    ][15777] Completed state [nova-manage db online_data_migrations] at time 14:29:45.935476 duration_in_ms=136.356
2019-05-09 14:29:45,936 [salt.state       :1780][INFO    ][15777] Running state [/etc/systemd/system/nova-placement-api.service] at time 14:29:45.935974
2019-05-09 14:29:45,936 [salt.state       :1813][INFO    ][15777] Executing state file.symlink for [/etc/systemd/system/nova-placement-api.service]
2019-05-09 14:29:45,958 [salt.state       :300 ][INFO    ][15777] {'new': '/etc/systemd/system/nova-placement-api.service'}
2019-05-09 14:29:45,958 [salt.state       :1951][INFO    ][15777] Completed state [/etc/systemd/system/nova-placement-api.service] at time 14:29:45.958745 duration_in_ms=22.771
2019-05-09 14:29:45,961 [salt.state       :1780][INFO    ][15777] Running state [nova-placement-api] at time 14:29:45.961034
2019-05-09 14:29:45,961 [salt.state       :1813][INFO    ][15777] Executing state pkg.installed for [nova-placement-api]
2019-05-09 14:29:46,574 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:29:46,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'nova-placement-api'] in directory '/root'
2019-05-09 14:29:50,937 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:29:51,006 [salt.state       :300 ][INFO    ][15777] Made the following changes:
'nova-placement-api' changed from 'absent' to '2:18.2.0-2~u16.04+mcp119'

2019-05-09 14:29:51,051 [salt.state       :915 ][INFO    ][15777] Loading fresh modules for state activity
2019-05-09 14:29:51,137 [salt.state       :1951][INFO    ][15777] Completed state [nova-placement-api] at time 14:29:51.137285 duration_in_ms=5176.251
2019-05-09 14:29:51,142 [salt.state       :1780][INFO    ][15777] Running state [/etc/apache2/sites-available/nova-placement-api.conf] at time 14:29:51.142662
2019-05-09 14:29:51,142 [salt.state       :1813][INFO    ][15777] Executing state file.managed for [/etc/apache2/sites-available/nova-placement-api.conf]
2019-05-09 14:29:51,192 [salt.fileclient  :1219][INFO    ][15777] Fetching file from saltenv 'base', ** done ** 'nova/files/rocky/nova-placement-api.conf'
2019-05-09 14:29:51,444 [salt.state       :300 ][INFO    ][15777] File changed:
--- 
+++ 
@@ -1,6 +1,7 @@
-Listen 8778
 
-<VirtualHost *:8778>
+Listen 192.168.10.37:8778
+
+<VirtualHost 192.168.10.37:8778>
     WSGIScriptAlias / /usr/bin/nova-placement-api
     WSGIDaemonProcess nova-placement processes=5 threads=1 user=nova group=nova display-name=%{GROUP}
     WSGIProcessGroup nova-placement
@@ -13,7 +14,7 @@
     </IfVersion>
 
     ErrorLog /var/log/apache2/nova_placement_error.log
-    CustomLog /var/log/apache2/nova_placement_access.log combined
+    CustomLog /var/log/apache2/nova_placement_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 
     <Directory /usr/bin>
         <IfVersion >= 2.4>
@@ -25,13 +26,3 @@
         </IfVersion>
     </Directory>
 </VirtualHost>
-
-Alias /placement /usr/bin/nova-placement-api
-<Location /placement>
-  SetHandler wsgi-script
-  Options +ExecCGI
-
-  WSGIProcessGroup nova-placement
-  WSGIApplicationGroup %{GLOBAL}
-  WSGIPassAuthorization On
-</Location>

2019-05-09 14:29:51,444 [salt.state       :1951][INFO    ][15777] Completed state [/etc/apache2/sites-available/nova-placement-api.conf] at time 14:29:51.444920 duration_in_ms=302.257
2019-05-09 14:29:51,454 [salt.state       :1780][INFO    ][15777] Running state [nova-placement-api] at time 14:29:51.454115
2019-05-09 14:29:51,454 [salt.state       :1813][INFO    ][15777] Executing state apache_site.enabled for [nova-placement-api]
2019-05-09 14:29:51,454 [salt.state       :300 ][INFO    ][15777] nova-placement-api already enabled.
2019-05-09 14:29:51,454 [salt.state       :1951][INFO    ][15777] Completed state [nova-placement-api] at time 14:29:51.454789 duration_in_ms=0.674
2019-05-09 14:29:51,455 [salt.state       :1780][INFO    ][15777] Running state [nova-manage cell_v2 discover_hosts --verbose] at time 14:29:51.455680
2019-05-09 14:29:51,455 [salt.state       :1813][INFO    ][15777] Executing state cmd.run for [nova-manage cell_v2 discover_hosts --verbose]
2019-05-09 14:29:51,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command 'nova-manage cell_v2 discover_hosts --verbose' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:29:55,847 [salt.state       :300 ][INFO    ][15777] {'pid': 20717, 'retcode': 0, 'stderr': '', 'stdout': "Found 2 cell mappings.\nSkipping cell0 since it does not contain hosts.\nGetting computes from cell 'cell1': 72af1c26-c2cc-499c-a122-d3205cc294d4\nFound 0 unmapped computes in cell: 72af1c26-c2cc-499c-a122-d3205cc294d4"}
2019-05-09 14:29:55,847 [salt.state       :1951][INFO    ][15777] Completed state [nova-manage cell_v2 discover_hosts --verbose] at time 14:29:55.847754 duration_in_ms=4392.074
2019-05-09 14:29:55,855 [salt.state       :1780][INFO    ][15777] Running state [cell1] at time 14:29:55.855617
2019-05-09 14:29:55,855 [salt.state       :1813][INFO    ][15777] Executing state novav21.instances_mapped_to_cell for [cell1]
2019-05-09 14:29:55,856 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command 'nova-manage cell_v2 list_cells 2>/dev/null | awk '/cell1/ {print $4}'' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:29:59,629 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command 'nova-manage cell_v2 map_instances --cell_uuid 72af1c26-c2cc-499c-a122-d3205cc294d4' as user 'nova' in directory '/var/lib/nova'
2019-05-09 14:30:03,904 [salt.state       :300 ][INFO    ][15777] All instances mapped in cell cell1
2019-05-09 14:30:03,905 [salt.state       :1951][INFO    ][15777] Completed state [cell1] at time 14:30:03.905745 duration_in_ms=8050.127
2019-05-09 14:30:04,555 [salt.state       :1780][INFO    ][15777] Running state [apache2] at time 14:30:04.555923
2019-05-09 14:30:04,556 [salt.state       :1813][INFO    ][15777] Executing state service.running for [apache2]
2019-05-09 14:30:04,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:30:04,574 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:30:04,603 [salt.state       :300 ][INFO    ][15777] The service apache2 is already running
2019-05-09 14:30:04,604 [salt.state       :1951][INFO    ][15777] Completed state [apache2] at time 14:30:04.603949 duration_in_ms=48.025
2019-05-09 14:30:04,604 [salt.state       :1780][INFO    ][15777] Running state [apache2] at time 14:30:04.604345
2019-05-09 14:30:04,604 [salt.state       :1813][INFO    ][15777] Executing state service.mod_watch for [apache2]
2019-05-09 14:30:04,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:30:04,621 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15777] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-05-09 14:30:07,066 [salt.state       :300 ][INFO    ][15777] {'apache2': True}
2019-05-09 14:30:07,066 [salt.state       :1951][INFO    ][15777] Completed state [apache2] at time 14:30:07.066888 duration_in_ms=2462.543
2019-05-09 14:30:07,071 [salt.minion      :1711][INFO    ][15777] Returning information for job: 20190509142828716666
2019-05-09 14:31:13,575 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509143113570722
2019-05-09 14:31:13,601 [salt.minion      :1432][INFO    ][21265] Starting a new job with PID 21265
2019-05-09 14:31:20,217 [salt.state       :915 ][INFO    ][21265] Loading fresh modules for state activity
2019-05-09 14:31:20,338 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/init.sls'
2019-05-09 14:31:20,402 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/server.sls'
2019-05-09 14:31:20,663 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/db/offline_sync.sls'
2019-05-09 14:31:20,766 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/_ssl/mysql.sls'
2019-05-09 14:31:20,901 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/_ssl/rabbitmq.sls'
2019-05-09 14:31:22,271 [salt.state       :1780][INFO    ][21265] Running state [heat-api] at time 14:31:22.271094
2019-05-09 14:31:22,271 [salt.state       :1813][INFO    ][21265] Executing state pkg.installed for [heat-api]
2019-05-09 14:31:22,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:31:22,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['apt-cache', '-q', 'policy', 'heat-api'] in directory '/root'
2019-05-09 14:31:22,914 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:31:25,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:31:25,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api'] in directory '/root'
2019-05-09 14:31:28,631 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509143128618341
2019-05-09 14:31:28,657 [salt.minion      :1432][INFO    ][21710] Starting a new job with PID 21710
2019-05-09 14:31:28,697 [salt.minion      :1711][INFO    ][21710] Returning information for job: 20190509143128618341
2019-05-09 14:31:48,910 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:31:48,985 [salt.state       :300 ][INFO    ][21265] Made the following changes:
'python-magnumclient' changed from 'absent' to '2.8.0-1.0~u16.04+mcp1'
'python-zunclient' changed from 'absent' to '2.1.0-1~u16.04+mcp'
'python-heatclient' changed from 'absent' to '1.16.2-2~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-websocket' changed from 'absent' to '0.48.0-1~u16.04+mcp'
'python-senlinclient' changed from 'absent' to '1.7.0-1.0~u16.04+mcp2'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-monascaclient' changed from 'absent' to '1.12.1-1~u16.04+mcp0'
'python-mistralclient' changed from 'absent' to '1:3.3.0-1.0~u16.04+mcp1'
'heat-common' changed from 'absent' to '1:11.0.0-5~u16.04+mcp1'
'python-docker' changed from 'absent' to '3.2.1-1~u16.04+mcp'
'python-designateclient' changed from 'absent' to '2.10.0-2~u16.04+mcp'
'golang-docker-credential-helpers' changed from 'absent' to '0.6.1-1~u16.04+mcp'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1.1'
'python-troveclient' changed from 'absent' to '1:2.14.0-1.0~u16.04+mcp2'
'python2.7-waitress' changed from 'absent' to '1'
'python-saharaclient' changed from 'absent' to '1.5.0-1.0~u16.04+mcp1'
'heat-api' changed from 'absent' to '1:11.0.0-5~u16.04+mcp1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-blazarclient' changed from 'absent' to '2.0.0-1~u16.04+mcp'
'python-octaviaclient' changed from 'absent' to '1.6.0-2~u16.04+mcp7'
'libsecret-1-0' changed from 'absent' to '0.18.4-1ubuntu2'
'python-manilaclient' changed from 'absent' to '1.24.2-1~u16.04+mcp6'
'python-neutron-lib' changed from 'absent' to '1.18.0-1~u16.04+mcp5'
'python-weakrefmethod' changed from 'absent' to '1.0.3-2~u16.04+mcp1'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp5'
'python-croniter' changed from 'absent' to '0.3.8-1'
'python-backports.ssl-match-hostname' changed from 'absent' to '3.5.0.1-1~u16.04+mcp'
'python-dockerpycreds' changed from 'absent' to '0.2.2-1~u16.04+mcp'
'libsecret-common' changed from 'absent' to '0.18.4-1ubuntu2'
'python-heat' changed from 'absent' to '1:11.0.0-5~u16.04+mcp1'
'python-zaqarclient' changed from 'absent' to '1.9.0-1.0~u16.04+mcp2'
'python-yaql' changed from 'absent' to '1.1.3-2~u16.04+mcp1'
'q-text-as-data' changed from 'absent' to '1'

2019-05-09 14:31:49,027 [salt.state       :915 ][INFO    ][21265] Loading fresh modules for state activity
2019-05-09 14:31:49,075 [salt.state       :1951][INFO    ][21265] Completed state [heat-api] at time 14:31:49.075464 duration_in_ms=26804.37
2019-05-09 14:31:49,082 [salt.state       :1780][INFO    ][21265] Running state [heat-api-cfn] at time 14:31:49.082085
2019-05-09 14:31:49,082 [salt.state       :1813][INFO    ][21265] Executing state pkg.installed for [heat-api-cfn]
2019-05-09 14:31:49,937 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:31:50,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-api-cfn'] in directory '/root'
2019-05-09 14:31:55,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:31:55,609 [salt.state       :300 ][INFO    ][21265] Made the following changes:
'heat-api-cfn' changed from 'absent' to '1:11.0.0-5~u16.04+mcp1'

2019-05-09 14:31:55,635 [salt.state       :915 ][INFO    ][21265] Loading fresh modules for state activity
2019-05-09 14:31:55,693 [salt.state       :1951][INFO    ][21265] Completed state [heat-api-cfn] at time 14:31:55.693436 duration_in_ms=6611.347
2019-05-09 14:31:55,708 [salt.state       :1780][INFO    ][21265] Running state [heat-engine] at time 14:31:55.708003
2019-05-09 14:31:55,708 [salt.state       :1813][INFO    ][21265] Executing state pkg.installed for [heat-engine]
2019-05-09 14:31:56,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:31:56,649 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'heat-engine'] in directory '/root'
2019-05-09 14:31:58,733 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509143158724376
2019-05-09 14:31:58,763 [salt.minion      :1432][INFO    ][23291] Starting a new job with PID 23291
2019-05-09 14:31:58,805 [salt.minion      :1711][INFO    ][23291] Returning information for job: 20190509143158724376
2019-05-09 14:32:01,622 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:32:01,667 [salt.state       :300 ][INFO    ][21265] Made the following changes:
'heat-engine' changed from 'absent' to '1:11.0.0-5~u16.04+mcp1'

2019-05-09 14:32:01,692 [salt.state       :915 ][INFO    ][21265] Loading fresh modules for state activity
2019-05-09 14:32:01,727 [salt.state       :1951][INFO    ][21265] Completed state [heat-engine] at time 14:32:01.727692 duration_in_ms=6019.688
2019-05-09 14:32:01,737 [salt.state       :1780][INFO    ][21265] Running state [heat-common] at time 14:32:01.737766
2019-05-09 14:32:01,738 [salt.state       :1813][INFO    ][21265] Executing state pkg.installed for [heat-common]
2019-05-09 14:32:02,513 [salt.state       :300 ][INFO    ][21265] All specified packages are already installed
2019-05-09 14:32:02,513 [salt.state       :1951][INFO    ][21265] Completed state [heat-common] at time 14:32:02.513862 duration_in_ms=776.096
2019-05-09 14:32:02,514 [salt.state       :1780][INFO    ][21265] Running state [python-heatclient] at time 14:32:02.514173
2019-05-09 14:32:02,514 [salt.state       :1813][INFO    ][21265] Executing state pkg.installed for [python-heatclient]
2019-05-09 14:32:02,522 [salt.state       :300 ][INFO    ][21265] All specified packages are already installed
2019-05-09 14:32:02,522 [salt.state       :1951][INFO    ][21265] Completed state [python-heatclient] at time 14:32:02.522411 duration_in_ms=8.237
2019-05-09 14:32:02,522 [salt.state       :1780][INFO    ][21265] Running state [gettext-base] at time 14:32:02.522605
2019-05-09 14:32:02,522 [salt.state       :1813][INFO    ][21265] Executing state pkg.installed for [gettext-base]
2019-05-09 14:32:02,529 [salt.state       :300 ][INFO    ][21265] All specified packages are already installed
2019-05-09 14:32:02,530 [salt.state       :1951][INFO    ][21265] Completed state [gettext-base] at time 14:32:02.530139 duration_in_ms=7.535
2019-05-09 14:32:02,533 [salt.state       :1780][INFO    ][21265] Running state [heat_ssl_mysql] at time 14:32:02.533719
2019-05-09 14:32:02,533 [salt.state       :1813][INFO    ][21265] Executing state test.show_notification for [heat_ssl_mysql]
2019-05-09 14:32:02,534 [salt.state       :300 ][INFO    ][21265] Running heat._ssl.mysql
2019-05-09 14:32:02,534 [salt.state       :1951][INFO    ][21265] Completed state [heat_ssl_mysql] at time 14:32:02.534381 duration_in_ms=0.662
2019-05-09 14:32:02,534 [salt.state       :1780][INFO    ][21265] Running state [heat_ssl_rabbitmq] at time 14:32:02.534666
2019-05-09 14:32:02,534 [salt.state       :1813][INFO    ][21265] Executing state test.show_notification for [heat_ssl_rabbitmq]
2019-05-09 14:32:02,535 [salt.state       :300 ][INFO    ][21265] Running heat._ssl.rabbitmq
2019-05-09 14:32:02,535 [salt.state       :1951][INFO    ][21265] Completed state [heat_ssl_rabbitmq] at time 14:32:02.535204 duration_in_ms=0.538
2019-05-09 14:32:02,535 [salt.state       :1780][INFO    ][21265] Running state [/etc/heat/heat.conf] at time 14:32:02.535613
2019-05-09 14:32:02,535 [salt.state       :1813][INFO    ][21265] Executing state file.managed for [/etc/heat/heat.conf]
2019-05-09 14:32:02,561 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/files/rocky/heat.conf.Debian'
2019-05-09 14:32:02,828 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/service/_ssl.conf'
2019-05-09 14:32:02,846 [salt.state       :300 ][INFO    ][21265] File changed:
--- 
+++ 
@@ -1,10 +1,217 @@
+
+
 [DEFAULT]
-
-#
-# From heat.common.config
-#
-
-# Name of the engine node. This can be an opaque identifier. It is not necessarily a hostname, FQDN, or IP address. (string value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout = 600
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+
+#
+# From heat.common.config
+#
+
+# Name of the engine node. This can be an opaque identifier. It is not
+# necessarily a hostname, FQDN, or IP address. (string value)
 #host = <Hostname>
 
 # List of directories to search for plug-ins. (list value)
@@ -16,63 +223,74 @@
 # The directory to search for template files. (string value)
 #template_dir = /etc/heat/templates
 
-# DEPRECATED: Select deferred auth method, stored password or trusts. (string value)
+# DEPRECATED: Select deferred auth method, stored password or trusts. (string
+# value)
 # Possible values:
 # password - <No description provided>
 # trusts - <No description provided>
 # This option is deprecated for removal since 9.0.0.
 # Its value may be silently ignored in the future.
-# Reason: Stored password based deferred auth is broken when used with keystone v3 and is not supported.
+# Reason: Stored password based deferred auth is broken when used with keystone
+# v3 and is not supported.
 #deferred_auth_method = trusts
 
-# Allow reauthentication on token expiry, such that long-running tasks may complete. Note this defeats the expiry of any provided user
-# tokens. (string value)
+# Allow reauthentication on token expiry, such that long-running tasks may
+# complete. Note this defeats the expiry of any provided user tokens. (string
+# value)
 # Possible values:
 # '' - <No description provided>
 # trusts - <No description provided>
 #reauthentication_auth_method =
 
-# Subset of trustor roles to be delegated to heat. If left unset, all roles of a user will be delegated to heat when creating a stack. (list
-# value)
+# Subset of trustor roles to be delegated to heat. If left unset, all roles of
+# a user will be delegated to heat when creating a stack. (list value)
 #trusts_delegated_roles =
 
-# Maximum resources allowed per top-level stack. -1 stands for unlimited. (integer value)
-#max_resources_per_stack = 1000
-
-# Maximum number of stacks any one tenant may have active at one time. (integer value)
+# Maximum resources allowed per top-level stack. -1 stands for unlimited.
+# (integer value)
+max_resources_per_stack = 20000
+
+# Maximum number of stacks any one tenant may have active at one time. (integer
+# value)
 #max_stacks_per_tenant = 100
 
-# Number of times to retry to bring a resource to a non-error state. Set to 0 to disable retries. (integer value)
+# Number of times to retry to bring a resource to a non-error state. Set to 0
+# to disable retries. (integer value)
 #action_retry_limit = 5
 
-# Number of times to retry when a client encounters an expected intermittent error. Set to 0 to disable retries. (integer value)
+# Number of times to retry when a client encounters an expected intermittent
+# error. Set to 0 to disable retries. (integer value)
 #client_retry_limit = 2
 
 # Maximum length of a server name to be used in nova. (integer value)
 # Maximum value: 53
 #max_server_name_length = 53
 
-# Number of times to check whether an interface has been attached or detached. (integer value)
+# Number of times to check whether an interface has been attached or detached.
+# (integer value)
 # Minimum value: 1
 #max_interface_check_attempts = 10
 
-# Controls how many events will be pruned whenever a stack's events are purged. Set this lower to keep more events at the expense of more
-# frequent purges. (integer value)
+# Controls how many events will be pruned whenever a stack's events are purged.
+# Set this lower to keep more events at the expense of more frequent purges.
+# (integer value)
 # Minimum value: 1
 #event_purge_batch_size = 200
 
-# Rough number of maximum events that will be available per stack. Actual number of events can be a bit higher since purge checks take place
-# randomly 200/event_purge_batch_size percent of the time. Older events are deleted when events are purged. Set to 0 for unlimited events
-# per stack. (integer value)
+# Rough number of maximum events that will be available per stack. Actual
+# number of events can be a bit higher since purge checks take place randomly
+# 200/event_purge_batch_size percent of the time. Older events are deleted when
+# events are purged. Set to 0 for unlimited events per stack. (integer value)
 #max_events_per_stack = 1000
 
 # Timeout in seconds for stack action (ie. create or update). (integer value)
 #stack_action_timeout = 3600
-
-# The amount of time in seconds after an error has occurred that tasks may continue to run before being cancelled. (integer value)
+# The amount of time in seconds after an error has occurred that tasks may
+# continue to run before being cancelled. (integer value)
 #error_wait_time = 240
 
-# RPC timeout for the engine liveness check that is used for stack locking. (integer value)
+# RPC timeout for the engine liveness check that is used for stack locking.
+# (integer value)
 #engine_life_check_timeout = 2
 
 # DEPRECATED: Enable the legacy OS::Heat::CWLiteAlarm resource. (boolean value)
@@ -87,17 +305,23 @@
 # Enable the preview Stack Adopt feature. (boolean value)
 #enable_stack_adopt = false
 
-# Enables engine with convergence architecture. All stacks with this option will be created using convergence engine. (boolean value)
+# Enables engine with convergence architecture. All stacks with this option
+# will be created using convergence engine. (boolean value)
 #convergence_engine = true
 
-# On update, enables heat to collect existing resource properties from reality and converge to updated template. (boolean value)
+# On update, enables heat to collect existing resource properties from reality
+# and converge to updated template. (boolean value)
 #observe_on_update = false
 
-# Template default for how the server should receive the metadata required for software configuration. POLL_SERVER_CFN will allow calls to
-# the cfn API action DescribeStackResource authenticated with the provided keypair (requires enabled heat-api-cfn). POLL_SERVER_HEAT will
-# allow calls to the Heat API resource-show using the provided keystone credentials (requires keystone v3 API, and configured stack_user_*
-# config options). POLL_TEMP_URL will create and populate a Swift TempURL with metadata for polling (requires object-store endpoint which
-# supports TempURL).ZAQAR_MESSAGE will create a dedicated zaqar queue and post the metadata for polling. (string value)
+# Template default for how the server should receive the metadata required for
+# software configuration. POLL_SERVER_CFN will allow calls to the cfn API
+# action DescribeStackResource authenticated with the provided keypair
+# (requires enabled heat-api-cfn). POLL_SERVER_HEAT will allow calls to the
+# Heat API resource-show using the provided keystone credentials (requires
+# keystone v3 API, and configured stack_user_* config options). POLL_TEMP_URL
+# will create and populate a Swift TempURL with metadata for polling (requires
+# object-store endpoint which supports TempURL).ZAQAR_MESSAGE will create a
+# dedicated zaqar queue and post the metadata for polling. (string value)
 # Possible values:
 # POLL_SERVER_CFN - <No description provided>
 # POLL_SERVER_HEAT - <No description provided>
@@ -105,10 +329,13 @@
 # ZAQAR_MESSAGE - <No description provided>
 #default_software_config_transport = POLL_SERVER_CFN
 
-# Template default for how the server should signal to heat with the deployment output values. CFN_SIGNAL will allow an HTTP POST to a CFN
-# keypair signed URL (requires enabled heat-api-cfn). TEMP_URL_SIGNAL will create a Swift TempURL to be signaled via HTTP PUT (requires
-# object-store endpoint which supports TempURL). HEAT_SIGNAL will allow calls to the Heat API resource-signal using the provided keystone
-# credentials. ZAQAR_SIGNAL will create a dedicated zaqar queue to be signaled using the provided keystone credentials. (string value)
+# Template default for how the server should signal to heat with the deployment
+# output values. CFN_SIGNAL will allow an HTTP POST to a CFN keypair signed URL
+# (requires enabled heat-api-cfn). TEMP_URL_SIGNAL will create a Swift TempURL
+# to be signaled via HTTP PUT (requires object-store endpoint which supports
+# TempURL). HEAT_SIGNAL will allow calls to the Heat API resource-signal using
+# the provided keystone credentials. ZAQAR_SIGNAL will create a dedicated zaqar
+# queue to be signaled using the provided keystone credentials. (string value)
 # Possible values:
 # CFN_SIGNAL - <No description provided>
 # TEMP_URL_SIGNAL - <No description provided>
@@ -116,100 +343,118 @@
 # ZAQAR_SIGNAL - <No description provided>
 #default_deployment_signal_transport = CFN_SIGNAL
 
-# Template default for how the user_data should be formatted for the server. For HEAT_CFNTOOLS, the user_data is bundled as part of the
-# heat-cfntools cloud-init boot configuration data. For RAW the user_data is passed to Nova unmodified. For SOFTWARE_CONFIG user_data is
-# bundled as part of the software config data, and metadata is derived from any associated SoftwareDeployment resources. (string value)
+# Template default for how the user_data should be formatted for the server.
+# For HEAT_CFNTOOLS, the user_data is bundled as part of the heat-cfntools
+# cloud-init boot configuration data. For RAW the user_data is passed to Nova
+# unmodified. For SOFTWARE_CONFIG user_data is bundled as part of the software
+# config data, and metadata is derived from any associated SoftwareDeployment
+# resources. (string value)
 # Possible values:
 # HEAT_CFNTOOLS - <No description provided>
 # RAW - <No description provided>
 # SOFTWARE_CONFIG - <No description provided>
 #default_user_data_format = HEAT_CFNTOOLS
 
-# Stacks containing these tag names will be hidden. Multiple tags should be given in a comma-delimited list (eg.
-# hidden_stack_tags=hide_me,me_too). (list value)
+# Stacks containing these tag names will be hidden. Multiple tags should be
+# given in a comma-delimited list (eg. hidden_stack_tags=hide_me,me_too). (list
+# value)
 #hidden_stack_tags = data-processing-cluster
 
 # Deprecated. (string value)
 #onready = <None>
 
-# When this feature is enabled, scheduler hints identifying the heat stack context of a server or volume resource are passed to the
-# configured schedulers in nova and cinder, for creates done using heat resource types OS::Cinder::Volume, OS::Nova::Server, and
-# AWS::EC2::Instance. heat_root_stack_id will be set to the id of the root stack of the resource, heat_stack_id will be set to the id of the
-# resource's parent stack, heat_stack_name will be set to the name of the resource's parent stack, heat_path_in_stack will be set to a list
-# of comma delimited strings of stackresourcename and stackname with list[0] being 'rootstackname', heat_resource_name will be set to the
-# resource's name, and heat_resource_uuid will be set to the resource's orchestration id. (boolean value)
+# When this feature is enabled, scheduler hints identifying the heat stack
+# context of a server or volume resource are passed to the configured
+# schedulers in nova and cinder, for creates done using heat resource types
+# OS::Cinder::Volume, OS::Nova::Server, and AWS::EC2::Instance.
+# heat_root_stack_id will be set to the id of the root stack of the resource,
+# heat_stack_id will be set to the id of the resource's parent stack,
+# heat_stack_name will be set to the name of the resource's parent stack,
+# heat_path_in_stack will be set to a list of comma delimited strings of
+# stackresourcename and stackname with list[0] being 'rootstackname',
+# heat_resource_name will be set to the resource's name, and heat_resource_uuid
+# will be set to the resource's orchestration id. (boolean value)
 #stack_scheduler_hints = false
 
-# Encrypt template parameters that were marked as hidden and also all the resource properties before storing them in database. (boolean
-# value)
+# Encrypt template parameters that were marked as hidden and also all the
+# resource properties before storing them in database. (boolean value)
 #encrypt_parameters_and_properties = false
 
 # Seconds between running periodic tasks. (integer value)
 #periodic_interval = 60
 
-# URL of the Heat metadata server. NOTE: Setting this is only needed if you require instances to use a different endpoint than in the
-# keystone catalog (string value)
+# URL of the Heat metadata server. NOTE: Setting this is only needed if you
+# require instances to use a different endpoint than in the keystone catalog
+# (string value)
 #heat_metadata_server_url = <None>
+heat_metadata_server_url = http://192.168.10.13:8000
 
 # URL of the Heat waitcondition server. (string value)
 #heat_waitcondition_server_url = <None>
+heat_waitcondition_server_url = http://192.168.10.13:8000/v1/waitcondition
 
 # DEPRECATED: URL of the Heat CloudWatch server. (string value)
 # This option is deprecated for removal since 10.0.0.
 # Its value may be silently ignored in the future.
 # Reason: Heat CloudWatch Service has been removed.
-#heat_watch_server_url =
+#heat_watch_server_url = http://192.168.10.13:8003
 
 # Instance connection to CFN/CW API via https. (string value)
-#instance_connection_is_secure = 0
-
-# Instance connection to CFN/CW API validate certs if SSL is used. (string value)
+instance_connection_is_secure = 0
+
+# Instance connection to CFN/CW API validate certs if SSL is used. (string
+# value)
 #instance_connection_https_validate_certificates = 1
 
 # Default region name used to get services endpoints. (string value)
 #region_name_for_services = <None>
+region_name_for_services = RegionOne
 
 # Keystone role for heat template-defined users. (string value)
 #heat_stack_user_role = heat_stack_user
 
-# Keystone domain ID which contains heat template-defined users. If this option is set, stack_user_domain_name option will be ignored.
-# (string value)
+# Keystone domain ID which contains heat template-defined users. If this option
+# is set, stack_user_domain_name option will be ignored. (string value)
 # Deprecated group/name - [DEFAULT]/stack_user_domain
 #stack_user_domain_id = <None>
 
-# Keystone domain name which contains heat template-defined users. If `stack_user_domain_id` option is set, this option is ignored. (string
-# value)
+# Keystone domain name which contains heat template-defined users. If
+# `stack_user_domain_id` option is set, this option is ignored. (string value)
 stack_user_domain_name = heat
 
-# Keystone username, a user with roles sufficient to manage users and projects in the stack_user_domain. (string value)
+# Keystone username, a user with roles sufficient to manage users and projects
+# in the stack_user_domain. (string value)
+#stack_domain_admin = <None>
 stack_domain_admin = heat_domain_admin
 
 # Keystone password for stack_domain_admin user. (string value)
-stack_domain_admin_password = 
+#stack_domain_admin_password = <None>
+stack_domain_admin_password = opnfv_secret
 
 # Maximum raw byte size of any template. (integer value)
-#max_template_size = 524288
+max_template_size = 5440000
 
 # Maximum depth allowed when using nested stacks. (integer value)
 #max_nested_stack_depth = 5
 
-# Number of heat-engine processes to fork and run. Will default to either to 4 or number of CPUs on the host, whichever is greater. (integer
-# value)
+# Number of heat-engine processes to fork and run. Will default to either to 4
+# or number of CPUs on the host, whichever is greater. (integer value)
 #num_engine_workers = <None>
 
 #
 # From heat.common.crypt
 #
 
-# Key used to encrypt authentication info in the database. Length of this key must be 32 characters. (string value)
-#auth_encryption_key = notgood but just long enough i t
+# Key used to encrypt authentication info in the database. Length of this key
+# must be 32 characters. (string value)
 
 #
 # From heat.common.wsgi
 #
 
-# Maximum raw byte size of JSON request body. Should be larger than max_template_size. (integer value)
-#max_json_body_size = 1048576
+# Maximum raw byte size of JSON request body. Should be larger than
+# max_template_size. (integer value)
+max_json_body_size = 10880000
 
 #
 # From heat.engine.clients
@@ -241,778 +486,1645 @@
 
 # Custom template for the built-in loadbalancer nested stack. (string value)
 #loadbalancer_template = <None>
-
 #
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging
-# configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging
-# configuration is set in the configuration file and other logging configuration options are ignored (for example,
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
 # logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default: %(default)s . This option is ignored if log_config_append is set.
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
 # (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
 # option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option is ignored if log_config_append is set. (string value)
+log_file = /var/log/heat/heat.log
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified
-# path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if
-# log_config_append is set. (boolean value)
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
 #watch_log_file = false
 
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
 # log_config_append is set. (boolean value)
 #use_syslog = false
 
-# Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal
-# native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
 #use_journal = false
 
-# Syslog facility to receive log lines. This option is ignored if log_config_append is set. (string value)
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
-# Defines the format string for %(user_identity)s that is used in logging_context_format_string. (string value)
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to
-# rate_limit_except_level are not filtered. An empty string means that all levels are filtered. (string value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
 
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.
+[auth_password]
+
+#
+# From heat.common.config
+#
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud = false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least
+# one endpoint needs to be specified. (list value)
+#allowed_auth_uris =
+
+
+[clients]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = publicURL
+endpoint_type = internalURL
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+
+[clients_aodh]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_barbican]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_ceilometer]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_cinder]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+# Allow client's debug log output. (boolean value)
+#http_log_debug = false
+
+
+[clients_designate]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_glance]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_heat]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+endpoint_type = publicURL
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# Optional heat url in format like http://0.0.0.0:8004/v1/%(tenant_id)s.
 # (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite
-# linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed.
-# Positive values specify an upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target. (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct
-# connections for direct message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.
-# (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
+#url =
+
+
+[clients_keystone]
+
+#
+# From heat.common.config
+#
+# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
+#auth_uri =
+auth_uri=http://192.168.10.35:35357
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+[clients_magnum]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_manila]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_mistral]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_monasca]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_neutron]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_nova]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+# Allow client's debug log output. (boolean value)
+#http_log_debug = false
+
+
+[clients_octavia]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_sahara]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_senlin]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_swift]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_trove]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[clients_zaqar]
+
+#
+# From heat.common.config
+#
+
+# Type of endpoint in Identity service catalog to use for communication with
+# the OpenStack service. (string value)
+#endpoint_type = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = <None>
+
+
+[ec2authtoken]
+
+#
+# From heat.api.aws.ec2token
+#
+
+# Authentication Endpoint URI. (string value)
+#auth_uri = <None>
+# NOTE(vsaienko) autodiscovery doesn't work here. Set version explicitly
+auth_uri = http://192.168.10.35:5000/v3
+
+# Allow orchestration of multiple clouds. (boolean value)
+#multi_cloud = false
+
+# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least
+# one endpoint needs to be specified. (list value)
+#allowed_auth_uris =
+
+# Optional PEM-formatted certificate chain file. (string value)
+#cert_file = <None>
+
+# Optional PEM-formatted file that contains the private key. (string value)
+#key_file = <None>
+
+# Optional CA cert file to use in SSL connections. (string value)
+#ca_file = <None>
+
+# If set, then the server's certificate will not be verified. (boolean value)
+#insecure = false
+
+
+[eventlet_opts]
+
+#
+# From heat.common.wsgi
+#
+
+# If False, closes the client socket connection explicitly. (boolean value)
+#wsgi_keep_alive = true
+
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
+#client_socket_timeout = 900
+
+
+[heat_api]
+
+#
+# From heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a particular network
+# interface. (IP address value)
+#bind_host = 0.0.0.0
+bind_host = 192.168.10.37
+
+# The port on which the server will listen. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
+#bind_port = 8004
+
+# Number of backlog requests to configure the socket with. (integer value)
+#backlog = 4096
+
+# Location of the SSL certificate file to use for SSL mode. (string value)
+#cert_file = <None>
+
+# Location of the SSL key file to use for enabling SSL mode. (string value)
+#key_file = <None>
+
+# Number of workers for Heat service. Default value 0 means, that service will
+# start number of workers equal number of cores on server. (integer value)
+# Minimum value: 0
+#workers = 0
+workers = 4
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds
+# that the connection must be idle before TCP starts sending keepalive probes.
+# (integer value)
+#tcp_keepidle = 600
+
+
+[heat_api_cfn]
+
+#
+# From heat.common.wsgi
+#
+
+# Address to bind the server. Useful when selecting a particular network
+# interface. (IP address value)
+bind_host = 192.168.10.37
+
+# The port on which the server will listen. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#bind_port = 8000
+
+# Number of backlog requests to configure the socket with. (integer value)
+#backlog = 4096
+
+# Location of the SSL certificate file to use for SSL mode. (string value)
+#cert_file = <None>
+
+# Location of the SSL key file to use for enabling SSL mode. (string value)
+#key_file = <None>
+
+# Number of workers for Heat service. (integer value)
+# Minimum value: 0
+#workers = 1
+
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated by the
+# Keystone v3 API with big service catalogs). (integer value)
+#max_header_line = 16384
+
+# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds
+# that the connection must be idle before TCP starts sending keepalive probes.
+# (integer value)
+#tcp_keepidle = 600
+
+
+[heat_api_cloudwatch]
+
+#
+# From heat.common.wsgi
+#
+
+# DEPRECATED: Address to bind the server. Useful when selecting a particular
+# network interface. (IP address value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been removed.
+#bind_host = 192.168.10.37
+
+# DEPRECATED: The port on which the server will listen. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been removed.
+#bind_port = 8003
+
+# DEPRECATED: Number of backlog requests to configure the socket with. (integer
+# value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been removed.
+#backlog = 4096
+
+# DEPRECATED: Location of the SSL certificate file to use for SSL mode. (string
+# value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#cert_file = <None>
+
+# DEPRECATED: Location of the SSL key file to use for enabling SSL mode.
+# (string value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#key_file = <None>
+
+# DEPRECATED: Number of workers for Heat service. (integer value)
+# Minimum value: 0
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#workers = 1
+
+# DEPRECATED: Maximum line size of message headers to be accepted.
+# max_header_line may need to be increased when using large tokens (typically
+# those generated by the Keystone v3 API with big service catalogs.) (integer
+# value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#max_header_line = 16384
+
+# DEPRECATED: The value for the socket option TCP_KEEPIDLE.  This is the time
+# in seconds that the connection must be idle before TCP starts sending
+# keepalive probes. (integer value)
+# This option is deprecated for removal since 10.0.0.
+# Its value may be silently ignored in the future.
+# Reason: Heat CloudWatch API has been Removed.
+#tcp_keepidle = 600
+
+
+[noauth]
+
+#
+# From heat.common.config
+#
+
+# JSON file containing the content returned by the noauth middleware. (string
+# value)
+#token_response =
+
+
+[paste_deploy]
+
+#
+# From heat.common.config
+#
+
+# The flavor to use. (string value)
+#flavor = <None>
+
+# The API paste config file to use. (string value)
+#api_paste_config = api-paste.ini
+
+
+[profiler]
+
+#
+# From heat.common.config
+#
+
+#
+# Enables the profiling for all services on this node. Default value is False
+# (fully disable the profiling feature).
+#
+# Possible values:
+#
+# * True: Enables the feature
+# * False: Disables the feature. The profiling cannot be started via this
+# project
+# operations. If the profiling is triggered by another project, this project
+# part
+# will be empty.
+#  (boolean value)
+# Deprecated group/name - [profiler]/profiler_enabled
+#enabled = false
+
+#
+# Enables SQL requests profiling in services. Default value is False (SQL
+# requests won't be traced).
+#
+# Possible values:
+#
+# * True: Enables SQL requests profiling. Each SQL query will be part of the
+# trace and can the be analyzed by how much time was spent for that.
+# * False: Disables SQL requests profiling. The spent time is only shown on a
+# higher level of operations. Single SQL queries cannot be analyzed this
+# way.
+#  (boolean value)
+#trace_sqlalchemy = false
+
+#
+# Secret key(s) to use for encrypting context data for performance profiling.
+# This string value should have the following format:
+# <key1>[,<key2>,...<keyn>],
+# where each key is some random string. A user who triggers the profiling via
+# the REST API has to set one of these keys in the headers of the REST API call
+# to include profiling results of this node for this particular project.
+#
+# Both "enabled" flag and "hmac_keys" config options should be set to enable
+# profiling. Also, to generate correct profiling information across all
+# services
+# at least one key needs to be consistent between OpenStack projects. This
+# ensures it can be used from client side to generate the trace, containing
+# information from all possible resources. (string value)
+#hmac_keys = SECRET_KEY
+
+#
+# Connection string for a notifier backend. Default value is messaging:// which
+# sets the notifier to oslo_messaging.
+#
+# Examples of possible values:
+#
+# * messaging://: use oslo_messaging driver for sending notifications.
+# * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications.
+# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending
+# notifications.
+#  (string value)
+#connection_string = messaging://
+
+#
+# Document type for notification indexing in elasticsearch.
+#  (string value)
+#es_doc_type = notification
+
+#
+# This parameter is a time value parameter (for example: es_scroll_time=2m),
+# indicating for how long the nodes that participate in the search will
+# maintain
+# relevant resources in order to continue and support it.
+#  (string value)
+#es_scroll_time = 2m
+
+#
+# Elasticsearch splits large requests in batches. This parameter defines
+# maximum size of each batch (for example: es_scroll_size=10000).
+#  (integer value)
+#es_scroll_size = 10000
+
+#
+# Redissentinel provides a timeout option on the connections.
+# This parameter defines that timeout (for example: socket_timeout=0.1).
+#  (floating point value)
+#socket_timeout = 0.1
+
+#
+# Redissentinel uses a service name to identify a master redis service.
+# This parameter defines the name (for example:
+# sentinal_service_name=mymaster).
+#  (string value)
+#sentinel_service_name = mymaster
+
+#
+# Enable filter traces that contain error/exception to a separated place.
+# Default value is set to False.
+#
+# Possible values:
+#
+# * True: Enable filter traces that contain error/exception.
+# * False: Disable the filter.
+#  (boolean value)
+#filter_error_trace = false
+
+
+[revision]
+
+#
+# From heat.common.config
+#
+
+# Heat build revision. If you would prefer to manage your build revision
+# separately, you can move this section to a different file and add it as
+# another config option. (string value)
+#heat_revision = unknown
+
+
+[trustee]
+
+#
+# From heat.common.context
+#
+
+# Authentication type to load (string value)
+# Deprecated group/name - [trustee]/auth_plugin
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Project ID to scope to (string value)
+# Deprecated group/name - [trustee]/tenant_id
+#project_id = <None>
+
+# Project name to scope to (string value)
+# Deprecated group/name - [trustee]/tenant_name
+#project_name = <None>
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used
+# for both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# User id (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [trustee]/user_name
+#username = <None>
+username = heat
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+user_domain_name = default
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+
+[volumes]
+
+#
+# From heat.common.config
+#
+
+# Indicate if cinder-backup service is enabled. This is a temporary workaround
+# until cinder-backup service becomes discoverable, see LP#1334856. (boolean
+# value)
+#backups_enabled = true
+
+[keystone_authtoken]
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+# Deprecated group/name - [keystone_authtoken]/auth_uri
+#www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
+#auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = heat
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
 # Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError. (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
 # Possible values:
 # json - <No description provided>
 # msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep
-# queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave
-# it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux,
-# milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS
-# default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other
-# negative value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received.
-# The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative
-# value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.
-# (integer value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries,
-# None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the
-# matchmaker. (list value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers include amqp and zmq. (string value)
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[cors]
+#
+# From oslo.middleware
+#
+
+# Indicate whether this resource may be shared with the domain
+# received in the requests "origin" header. Format:
+# "<protocol>://<host>[:<port>]", no trailing slash. Example:
+# https://horizon.example.com (list value)
+
+# Indicate that the actual request can include user credentials
+# (boolean value)
+
+# Indicate which headers are safe to expose to the API. Defaults to
+# HTTP Simple Headers. (list value)
+
+# Maximum cache age of CORS preflight requests. (integer value)
+
+# Indicate which methods can be used during the actual request. (list
+# value)
+
+# Indicate which header field names may be used during the actual
+# request. (list value)
+
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option. (string
-# value)
-#control_exchange = openstack
-
-#
-# From oslo.service.periodic_task
-#
-
-# Some periodic tasks can be run in a separate process. Should we run them here? (boolean value)
-#run_external_periodic_tasks = true
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling backdoor if that port is in use); and <start>:<end> results in
-# listening on the smallest unused port number within the specified range of port numbers.  The chosen port is displayed in the service's
-# log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can receive connections. This option is mutually exclusive with
-# 'backdoor_port' in that only one should be provided. If both are provided then the existence of this option overrides the usage of that
-# option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[auth_password]
-
-#
-# From heat.common.config
-#
-
-# Allow orchestration of multiple clouds. (boolean value)
-#multi_cloud = false
-
-# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least one endpoint needs to be specified. (list value)
-#allowed_auth_uris =
-
-
-[clients]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = publicURL
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = false
-
-
-[clients_aodh]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_barbican]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_cinder]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Allow client's debug log output. (boolean value)
-#http_log_debug = false
-
-
-[clients_designate]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_glance]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_heat]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Optional heat url in format like http://0.0.0.0:8004/v1/%(tenant_id)s. (string value)
-#url =
-
-
-[clients_keystone]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
-#auth_uri =
-
-
-[clients_magnum]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_manila]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_mistral]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_monasca]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_neutron]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_nova]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-# Allow client's debug log output. (boolean value)
-#http_log_debug = false
-
-
-[clients_octavia]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_sahara]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_senlin]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_swift]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_trove]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[clients_zaqar]
-
-#
-# From heat.common.config
-#
-
-# Type of endpoint in Identity service catalog to use for communication with the OpenStack service. (string value)
-#endpoint_type = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
-#ca_file = <None>
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = <None>
-
-
-[cors]
-
-#
-# From oslo.middleware
-#
-
-# Indicate whether this resource may be shared with the domain received in the requests "origin" header. Format:
-# "<protocol>://<host>[:<port>]", no trailing slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request. (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
 
 [database]
-
 #
 # From oslo.db
 #
@@ -1024,23 +2136,29 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection=sqlite:////var/lib/heat/heatdb
-
-# The SQLAlchemy connection string to use to connect to the slave database. (string value)
+#connection = <None>
+connection = mysql+pymysql://heat:opnfv_secret@192.168.10.23/heat?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL
-# mode is set by the server configuration, set this to no value. Example: mysql_sql_mode= (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB). (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
 # time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
@@ -1048,36 +2166,45 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool. (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -1087,1272 +2214,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost. (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
 # (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-
-[ec2authtoken]
-
-#
-# From heat.api.aws.ec2token
-#
-
-# Authentication Endpoint URI. (string value)
-#auth_uri = <None>
-
-# Allow orchestration of multiple clouds. (boolean value)
-#multi_cloud = false
-
-# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least one endpoint needs to be specified. (list value)
-#allowed_auth_uris =
-
-# Optional PEM-formatted certificate chain file. (string value)
-#cert_file = <None>
-
-# Optional PEM-formatted file that contains the private key. (string value)
-#key_file = <None>
-
-# Optional CA cert file to use in SSL connections. (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_policy]
+
+[ssl]
+#
+# From oslo.service.sslutils
+#
+
+# CA certificate file to use to verify connecting clients. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_ca_file
 #ca_file = <None>
 
-# If set, then the server's certificate will not be verified. (boolean value)
-#insecure = false
-
-
-[eventlet_opts]
-
-#
-# From heat.common.wsgi
-#
-
-# If False, closes the client socket connection explicitly. (boolean value)
-#wsgi_keep_alive = true
-
-# Timeout for client connections' socket operations. If an incoming connection is idle for this number of seconds it will be closed. A value
-# of '0' means wait forever. (integer value)
-#client_socket_timeout = 900
-
-
-[healthcheck]
-
-#
-# From oslo.middleware
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application is running on a port. Expects a "port:path" list of strings.
-# Used by DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
-[heat_api]
-
-#
-# From heat.common.wsgi
-#
-
-# Address to bind the server. Useful when selecting a particular network interface. (IP address value)
-#bind_host = 0.0.0.0
-
-# The port on which the server will listen. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#bind_port = 8004
-
-# Number of backlog requests to configure the socket with. (integer value)
-#backlog = 4096
-
-# Location of the SSL certificate file to use for SSL mode. (string value)
-#cert_file = <None>
-
-# Location of the SSL key file to use for enabling SSL mode. (string value)
-#key_file = <None>
-
-# Number of workers for Heat service. Default value 0 means, that service will start number of workers equal number of cores on server.
-# (integer value)
-# Minimum value: 0
-#workers = 0
-
-# Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those
-# generated by the Keystone v3 API with big service catalogs). (integer value)
-#max_header_line = 16384
-
-# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds that the connection must be idle before TCP starts sending
-# keepalive probes. (integer value)
-#tcp_keepidle = 600
-
-
-[heat_api_cfn]
-
-#
-# From heat.common.wsgi
-#
-
-# Address to bind the server. Useful when selecting a particular network interface. (IP address value)
-#bind_host = 0.0.0.0
-
-# The port on which the server will listen. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#bind_port = 8000
-
-# Number of backlog requests to configure the socket with. (integer value)
-#backlog = 4096
-
-# Location of the SSL certificate file to use for SSL mode. (string value)
-#cert_file = <None>
-
-# Location of the SSL key file to use for enabling SSL mode. (string value)
-#key_file = <None>
-
-# Number of workers for Heat service. (integer value)
-# Minimum value: 0
-#workers = 1
-
-# Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens (typically those
-# generated by the Keystone v3 API with big service catalogs). (integer value)
-#max_header_line = 16384
-
-# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds that the connection must be idle before TCP starts sending
-# keepalive probes. (integer value)
-#tcp_keepidle = 600
-
-
-[heat_api_cloudwatch]
-
-#
-# From heat.common.wsgi
-#
-
-# DEPRECATED: Address to bind the server. Useful when selecting a particular network interface. (IP address value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been removed.
-#bind_host = 0.0.0.0
-
-# DEPRECATED: The port on which the server will listen. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been removed.
-#bind_port = 8003
-
-# DEPRECATED: Number of backlog requests to configure the socket with. (integer value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been removed.
-#backlog = 4096
-
-# DEPRECATED: Location of the SSL certificate file to use for SSL mode. (string value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#cert_file = <None>
-
-# DEPRECATED: Location of the SSL key file to use for enabling SSL mode. (string value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#key_file = <None>
-
-# DEPRECATED: Number of workers for Heat service. (integer value)
-# Minimum value: 0
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#workers = 1
-
-# DEPRECATED: Maximum line size of message headers to be accepted. max_header_line may need to be increased when using large tokens
-# (typically those generated by the Keystone v3 API with big service catalogs.) (integer value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#max_header_line = 16384
-
-# DEPRECATED: The value for the socket option TCP_KEEPIDLE.  This is the time in seconds that the connection must be idle before TCP starts
-# sending keepalive probes. (integer value)
-# This option is deprecated for removal since 10.0.0.
-# Its value may be silently ignored in the future.
-# Reason: Heat CloudWatch API has been Removed.
-#tcp_keepidle = 600
-
-
-[keystone_authtoken]
-#
-# Re-added by openstack-pkg-tools
-#
-
-
-# Complete "admin" Identity API endpoint.
-auth_url = http://localhost:35357
-
-# Project name for auth.
-project_name = service
-
-# Project's domain name for auth.
-project_domain_name = default
-
-# Username for auth.
-username = heat
-
-# User's domain name for auth
-user_domain_name = default
-
-# Password for auth
-#password =
-
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned, client
-# support in the wild varies. If you're using a versioned v2 endpoint here, then this should *not* be the same endpoint the service user
-# utilizes for validating tokens, because normal end users may not be able to reach that endpoint. (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_uri
-www_authenticate_uri = http://localhost:5000
-
-# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not be an "admin" endpoint, as it should be accessible by all
-# end users. Unauthenticated clients are redirected to this endpoint to authenticate. Although this endpoint should ideally be unversioned,
-# client support in the wild varies. If you're using a versioned v2 endpoint here, then this should *not* be the same endpoint the service
-# user utilizes for validating tokens, because normal end users may not be able to reach that endpoint. This option is deprecated in favor
-# of www_authenticate_uri and will be removed in the S release. (string value)
-# This option is deprecated for removal since Queens.
-# Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri and will be removed in the S  release.
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the authorization decision to downstream WSGI components.
-# (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When auth_token middleware is deployed with a Swift cache, use this option
-# to have the middleware share a caching backend with swift. Otherwise, use the ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections. Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-region_name = regionOne
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option has been deprecated in the Ocata release and will be removed
-# in the P release. (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left undefined, tokens will instead be cached in-process. (list
-# value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware caches previously-seen tokens for a configurable duration (in
-# seconds). Set to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is retrieved from the Identity service (in seconds). A high
-# number of revocation events combined with a low cache duration may significantly reduce performance. Only valid for PKI tokens. This
-# option has been deprecated in the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or authenticated and encrypted. If MAC, token data is
-# authenticated (with HMAC) in the cache. If ENCRYPT, token data is encrypted and authenticated in the cache. If the value is not one of
-# these options or empty, auth_token will raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False, middleware will not ask for service catalog on token validation
-# and will not set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled" to not check token binding. "permissive" (default) to
-# validate binding information if the bind type is of a form known to the server and ignore it if not. "strict" like "permissive" but if the
-# bind type is unknown the token will be rejected. "required" any form of token binding is needed to be allowed. Finally the name of a
-# binding method that must be present in tokens. (string value)
-#enforce_token_bind = permissive
-
-# DEPRECATED: If true, the revocation list will be checked for cached tokens. This requires that PKI tokens are configured on the identity
-# server. (boolean value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
-
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a single algorithm or multiple. The algorithms are those supported
-# by Python standard hashlib.new(). The hashes will be tried in the order given, so put the preferred one first for performance. The result
-# of the first hash will be stored in the cache. This will typically be set to multiple values only while migrating from a less secure
-# algorithm to a more secure one. Once all the old tokens are expired this option should be set to a single value for better performance.
-# (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are allowed to request that an expired token can be used and so
-# this check should tightly control that only actual services should be sending this token. Roles here are applied as an ANY check so any
-# role in this list must be present. For backwards compatibility reasons this currently only affects the allow_expired check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass that don't pass the service_token_roles check as valid. Setting
-# this true will become the default in a future release and should be enabled if possible. (boolean value)
-#service_token_roles_required = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-auth_type = password
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g., [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[noauth]
-
-#
-# From heat.common.config
-#
-
-# JSON file containing the content returned by the noauth middleware. (string value)
-#token_response =
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system's CA-bundle to verify the server's
-# certificate. (boolean value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional) (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the hostname in the transport_url. In some configurations it may
-# be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to
-# provide a certificate per virtual host. Set ssl_verify_vhost to True if the server's SSL certificate uses the virtual host name instead of
-# the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the
-# virtual host name will be added to all message bus addresses, effectively creating a private 'subnet' per virtual host. Set to False if
-# the message bus supports virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative as the name of the virtual host.
-# (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to
-# a single destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered
-# in a round-robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC. (string
-# value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1
-# - indefinite (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on
-# some distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future
-# versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.
-# (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if
-# more than one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds. (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
-# queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues
-# (except those with auto-generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-mode":
-# "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are
-# automatically deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL
-# (integer value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. The "host" option should point or resolve to this address.
-# (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after closing a socket. The default value of -1 specifies an infinite
-# linger period. The value of 0 specifies no linger period. Pending messages shall be discarded immediately when the socket is closed.
-# Positive values specify an upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target. (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only with use_router_proxy=False which means to use direct
-# connections for direct message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons. This option is actual only in dynamic connections mode.
-# (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError. (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping a queue when server side disconnects. False means to keep
-# queue and messages even if server is disconnected, when the server appears we send all accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any other negative value) means to skip any overrides and leave
-# it to OS default; 0 and 1 (or any other positive value) mean to disable and enable the option respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit is platform dependent, for example, seconds in Linux,
-# milliseconds in Windows etc. The default value of -1 (or any other negative value and 0) means to skip any overrides and leave it to OS
-# default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote end is not available. The default value of -1 (or any other
-# negative value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if acknowledgement to the previous keepalive transmission is not received.
-# The unit is platform dependent, for example, seconds in Linux, milliseconds in Windows etc. The default value of -1 (or any other negative
-# value and 0) means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry attempt this timeout is multiplied by some specified multiplier.
-# (integer value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred: positive value N means at most N retries, 0 means no retries,
-# None or -1 (or any other negative values) mean to retry forever. This option is used only if acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher priority then the default publishers list taken from the
-# matchmaker. (list value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware
-#
-
-# The maximum body size for each  request, in bytes. (integer value)
-# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
-# Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
-
-# DEPRECATED: The HTTP Header that will be used to determine what the original request protocol scheme was, even if it was hidden by a SSL
-# termination proxy. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
-
-# Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating policies. If ``True``, the scope of the token used in the request is
-# compared to the ``scope_types`` of the policy being enforced. If the scopes do not match, an ``InvalidScope`` exception will be raised. If
-# ``False``, a message will be logged informing operators that policies are being invoked with mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the
-# config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched.  Missing or empty
-# directories are ignored. (multi valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[paste_deploy]
-
-#
-# From heat.common.config
-#
-
-# The flavor to use. (string value)
-#flavor = <None>
-
-# The API paste config file to use. (string value)
-#api_paste_config = api-paste.ini
-
-
-[profiler]
-
-#
-# From heat.common.config
-#
-
-#
-# Enable the profiling for all services on this node.
-#
-# Default value is False (fully disable the profiling feature).
-#
-# Possible values:
-#
-# * True: Enables the feature
-# * False: Disables the feature. The profiling cannot be started via this project
-#   operations. If the profiling is triggered by another project, this project
-#   part will be empty.
-#  (boolean value)
-# Deprecated group/name - [profiler]/profiler_enabled
-#enabled = false
-
-#
-# Enable SQL requests profiling in services.
-#
-# Default value is False (SQL requests won't be traced).
-#
-# Possible values:
-#
-# * True: Enables SQL requests profiling. Each SQL query will be part of the
-#   trace and can the be analyzed by how much time was spent for that.
-# * False: Disables SQL requests profiling. The spent time is only shown on a
-#   higher level of operations. Single SQL queries cannot be analyzed this way.
-#  (boolean value)
-#trace_sqlalchemy = false
-
-#
-# Secret key(s) to use for encrypting context data for performance profiling.
-#
-# This string value should have the following format: <key1>[,<key2>,...<keyn>],
-# where each key is some random string. A user who triggers the profiling via
-# the REST API has to set one of these keys in the headers of the REST API call
-# to include profiling results of this node for this particular project.
-#
-# Both "enabled" flag and "hmac_keys" config options should be set to enable
-# profiling. Also, to generate correct profiling information across all services
-# at least one key needs to be consistent between OpenStack projects. This
-# ensures it can be used from client side to generate the trace, containing
-# information from all possible resources.
-#  (string value)
-#hmac_keys = SECRET_KEY
-
-#
-# Connection string for a notifier backend.
-#
-# Default value is ``messaging://`` which sets the notifier to oslo_messaging.
-#
-# Examples of possible values:
-#
-# * ``messaging://`` - use oslo_messaging driver for sending spans.
-# * ``redis://127.0.0.1:6379`` - use redis driver for sending spans.
-# * ``mongodb://127.0.0.1:27017`` - use mongodb driver for sending spans.
-# * ``elasticsearch://127.0.0.1:9200`` - use elasticsearch driver for sending
-#   spans.
-# * ``jaeger://127.0.0.1:6831`` - use jaeger tracing as driver for sending spans.
-#  (string value)
-#connection_string = messaging://
-
-#
-# Document type for notification indexing in elasticsearch.
-#  (string value)
-#es_doc_type = notification
-
-#
-# This parameter is a time value parameter (for example: es_scroll_time=2m),
-# indicating for how long the nodes that participate in the search will maintain
-# relevant resources in order to continue and support it.
-#  (string value)
-#es_scroll_time = 2m
-
-#
-# Elasticsearch splits large requests in batches. This parameter defines
-# maximum size of each batch (for example: es_scroll_size=10000).
-#  (integer value)
-#es_scroll_size = 10000
-
-#
-# Redissentinel provides a timeout option on the connections.
-# This parameter defines that timeout (for example: socket_timeout=0.1).
-#  (floating point value)
-#socket_timeout = 0.1
-
-#
-# Redissentinel uses a service name to identify a master redis service.
-# This parameter defines the name (for example:
-# ``sentinal_service_name=mymaster``).
-#  (string value)
-#sentinel_service_name = mymaster
-
-#
-# Enable filter traces that contain error/exception to a separated place.
-#
-# Default value is set to False.
-#
-# Possible values:
-#
-# * True: Enable filter traces that contain error/exception.
-# * False: Disable the filter.
-#  (boolean value)
-#filter_error_trace = false
-
-
-[revision]
-
-#
-# From heat.common.config
-#
-
-# Heat build revision. If you would prefer to manage your build revision separately, you can move this section to a different file and add
-# it as another config option. (string value)
-#heat_revision = unknown
-
-
-[trustee]
-
-#
-# From heat.common.context
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [trustee]/auth_plugin
-auth_type = password
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [trustee]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [trustee]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2
-# authentication. (string value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used for both the user and project domain in v3 and ignored in v2
-# authentication. (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [trustee]/user_name
-#username = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-user_domain_name = default
-
-# User's password (string value)
-#password = <None>
-
-
-[volumes]
-
-#
-# From heat.common.config
-#
-
-# Indicate if cinder-backup service is enabled. This is a temporary workaround until cinder-backup service becomes discoverable, see
-# LP#1334856. (boolean value)
-#backups_enabled = true
+# Certificate file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_cert_file
+#cert_file = <None>
+
+# Private key file to use when starting the server securely. (string value)
+# Deprecated group/name - [DEFAULT]/ssl_key_file
+#key_file = <None>
+
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
+#version = <None>
+
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
+#ciphers = <None>

2019-05-09 14:32:02,849 [salt.state       :1951][INFO    ][21265] Completed state [/etc/heat/heat.conf] at time 14:32:02.849045 duration_in_ms=313.432
2019-05-09 14:32:02,849 [salt.state       :1780][INFO    ][21265] Running state [heat-manage db_sync] at time 14:32:02.849907
2019-05-09 14:32:02,850 [salt.state       :1813][INFO    ][21265] Executing state cmd.run for [heat-manage db_sync]
2019-05-09 14:32:02,850 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command '/bin/false' in directory '/root'
2019-05-09 14:32:02,862 [salt.state       :300 ][INFO    ][21265] onlyif execution failed
2019-05-09 14:32:02,863 [salt.state       :1951][INFO    ][21265] Completed state [heat-manage db_sync] at time 14:32:02.863211 duration_in_ms=13.304
2019-05-09 14:32:02,863 [salt.state       :1780][INFO    ][21265] Running state [/etc/heat/api-paste.ini] at time 14:32:02.863831
2019-05-09 14:32:02,864 [salt.state       :1813][INFO    ][21265] Executing state file.managed for [/etc/heat/api-paste.ini]
2019-05-09 14:32:02,880 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/files/rocky/api-paste.ini'
2019-05-09 14:32:02,891 [salt.state       :300 ][INFO    ][21265] File changed:
--- 
+++ 
@@ -1,7 +1,7 @@
 
 # heat-api pipeline
 [pipeline:heat-api]
-pipeline = cors request_id faultwrap http_proxy_to_wsgi versionnegotiation authurl authtoken context osprofiler apiv1app
+pipeline = cors request_id faultwrap http_proxy_to_wsgi versionnegotiation osprofiler authurl authtoken context apiv1app
 
 # heat-api pipeline for standalone heat
 # ie. uses alternative auth backend that authenticates users against keystone
@@ -20,23 +20,23 @@
 #   flavor = custombackend
 #
 [pipeline:heat-api-custombackend]
-pipeline = cors request_id context faultwrap versionnegotiation custombackendauth apiv1app
+pipeline = cors request_id faultwrap versionnegotiation context custombackendauth apiv1app
 
 # To enable, in heat.conf:
 #   [paste_deploy]
 #   flavor = noauth
 #
 [pipeline:heat-api-noauth]
-pipeline = cors request_id faultwrap noauth context http_proxy_to_wsgi versionnegotiation apiv1app
+pipeline = cors request_id faultwrap http_proxy_to_wsgi versionnegotiation noauth context apiv1app
 
 # heat-api-cfn pipeline
 [pipeline:heat-api-cfn]
-pipeline = cors request_id http_proxy_to_wsgi cfnversionnegotiation ec2authtoken authtoken context osprofiler apicfnv1app
+pipeline = cors http_proxy_to_wsgi cfnversionnegotiation osprofiler ec2authtoken authtoken context apicfnv1app
 
 # heat-api-cfn pipeline for standalone heat
 # relies exclusively on authenticating with ec2 signed requests
 [pipeline:heat-api-cfn-standalone]
-pipeline = cors request_id http_proxy_to_wsgi cfnversionnegotiation ec2authtoken context apicfnv1app
+pipeline = cors http_proxy_to_wsgi cfnversionnegotiation ec2authtoken context apicfnv1app
 
 [app:apiv1app]
 paste.app_factory = heat.common.wsgi:app_factory

2019-05-09 14:32:02,891 [salt.state       :1951][INFO    ][21265] Completed state [/etc/heat/api-paste.ini] at time 14:32:02.891294 duration_in_ms=27.463
2019-05-09 14:32:02,891 [salt.state       :1780][INFO    ][21265] Running state [/etc/default/heat-api] at time 14:32:02.891650
2019-05-09 14:32:02,891 [salt.state       :1813][INFO    ][21265] Executing state file.managed for [/etc/default/heat-api]
2019-05-09 14:32:02,908 [salt.fileclient  :1219][INFO    ][21265] Fetching file from saltenv 'base', ** done ** 'heat/files/default'
2019-05-09 14:32:02,916 [salt.state       :300 ][INFO    ][21265] File changed:
New file
2019-05-09 14:32:02,916 [salt.state       :1951][INFO    ][21265] Completed state [/etc/default/heat-api] at time 14:32:02.916365 duration_in_ms=24.714
2019-05-09 14:32:02,916 [salt.state       :1780][INFO    ][21265] Running state [/etc/default/heat-api-cfn] at time 14:32:02.916774
2019-05-09 14:32:02,917 [salt.state       :1813][INFO    ][21265] Executing state file.managed for [/etc/default/heat-api-cfn]
2019-05-09 14:32:02,931 [salt.state       :300 ][INFO    ][21265] File changed:
New file
2019-05-09 14:32:02,932 [salt.state       :1951][INFO    ][21265] Completed state [/etc/default/heat-api-cfn] at time 14:32:02.931982 duration_in_ms=15.208
2019-05-09 14:32:02,932 [salt.state       :1780][INFO    ][21265] Running state [/etc/default/heat-engine] at time 14:32:02.932388
2019-05-09 14:32:02,932 [salt.state       :1813][INFO    ][21265] Executing state file.managed for [/etc/default/heat-engine]
2019-05-09 14:32:02,951 [salt.state       :300 ][INFO    ][21265] File changed:
New file
2019-05-09 14:32:02,951 [salt.state       :1951][INFO    ][21265] Completed state [/etc/default/heat-engine] at time 14:32:02.951953 duration_in_ms=19.565
2019-05-09 14:32:02,952 [salt.state       :1780][INFO    ][21265] Running state [chown heat:heat /var/log/heat/ -R] at time 14:32:02.952446
2019-05-09 14:32:02,952 [salt.state       :1813][INFO    ][21265] Executing state cmd.run for [chown heat:heat /var/log/heat/ -R]
2019-05-09 14:32:02,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command 'chown heat:heat /var/log/heat/ -R' in directory '/root'
2019-05-09 14:32:02,965 [salt.state       :300 ][INFO    ][21265] {'pid': 23526, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-05-09 14:32:02,965 [salt.state       :1951][INFO    ][21265] Completed state [chown heat:heat /var/log/heat/ -R] at time 14:32:02.965480 duration_in_ms=13.034
2019-05-09 14:32:02,969 [salt.state       :1780][INFO    ][21265] Running state [heat-api] at time 14:32:02.969155
2019-05-09 14:32:02,969 [salt.state       :1813][INFO    ][21265] Executing state service.running for [heat-api]
2019-05-09 14:32:02,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'status', 'heat-api.service', '-n', '0'] in directory '/root'
2019-05-09 14:32:02,986 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2019-05-09 14:32:03,000 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-enabled', 'heat-api.service'] in directory '/root'
2019-05-09 14:32:03,014 [salt.state       :300 ][INFO    ][21265] The service heat-api is already running
2019-05-09 14:32:03,015 [salt.state       :1951][INFO    ][21265] Completed state [heat-api] at time 14:32:03.014946 duration_in_ms=45.791
2019-05-09 14:32:03,015 [salt.state       :1780][INFO    ][21265] Running state [heat-api] at time 14:32:03.015266
2019-05-09 14:32:03,015 [salt.state       :1813][INFO    ][21265] Executing state service.mod_watch for [heat-api]
2019-05-09 14:32:03,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-active', 'heat-api.service'] in directory '/root'
2019-05-09 14:32:03,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api.service'] in directory '/root'
2019-05-09 14:32:03,064 [salt.state       :300 ][INFO    ][21265] {'heat-api': True}
2019-05-09 14:32:03,064 [salt.state       :1951][INFO    ][21265] Completed state [heat-api] at time 14:32:03.064761 duration_in_ms=49.495
2019-05-09 14:32:03,066 [salt.state       :1780][INFO    ][21265] Running state [heat-api-cfn] at time 14:32:03.066336
2019-05-09 14:32:03,066 [salt.state       :1813][INFO    ][21265] Executing state service.running for [heat-api-cfn]
2019-05-09 14:32:03,067 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'status', 'heat-api-cfn.service', '-n', '0'] in directory '/root'
2019-05-09 14:32:03,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2019-05-09 14:32:03,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-enabled', 'heat-api-cfn.service'] in directory '/root'
2019-05-09 14:32:03,136 [salt.state       :300 ][INFO    ][21265] The service heat-api-cfn is already running
2019-05-09 14:32:03,137 [salt.state       :1951][INFO    ][21265] Completed state [heat-api-cfn] at time 14:32:03.137303 duration_in_ms=70.967
2019-05-09 14:32:03,137 [salt.state       :1780][INFO    ][21265] Running state [heat-api-cfn] at time 14:32:03.137634
2019-05-09 14:32:03,138 [salt.state       :1813][INFO    ][21265] Executing state service.mod_watch for [heat-api-cfn]
2019-05-09 14:32:03,138 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-active', 'heat-api-cfn.service'] in directory '/root'
2019-05-09 14:32:03,153 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-api-cfn.service'] in directory '/root'
2019-05-09 14:32:03,183 [salt.state       :300 ][INFO    ][21265] {'heat-api-cfn': True}
2019-05-09 14:32:03,184 [salt.state       :1951][INFO    ][21265] Completed state [heat-api-cfn] at time 14:32:03.184190 duration_in_ms=46.556
2019-05-09 14:32:03,189 [salt.state       :1780][INFO    ][21265] Running state [heat-engine] at time 14:32:03.189440
2019-05-09 14:32:03,189 [salt.state       :1813][INFO    ][21265] Executing state service.running for [heat-engine]
2019-05-09 14:32:03,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'status', 'heat-engine.service', '-n', '0'] in directory '/root'
2019-05-09 14:32:03,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2019-05-09 14:32:03,239 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-enabled', 'heat-engine.service'] in directory '/root'
2019-05-09 14:32:03,265 [salt.state       :300 ][INFO    ][21265] The service heat-engine is already running
2019-05-09 14:32:03,265 [salt.state       :1951][INFO    ][21265] Completed state [heat-engine] at time 14:32:03.265833 duration_in_ms=76.394
2019-05-09 14:32:03,266 [salt.state       :1780][INFO    ][21265] Running state [heat-engine] at time 14:32:03.266133
2019-05-09 14:32:03,266 [salt.state       :1813][INFO    ][21265] Executing state service.mod_watch for [heat-engine]
2019-05-09 14:32:03,267 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemctl', 'is-active', 'heat-engine.service'] in directory '/root'
2019-05-09 14:32:03,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21265] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'heat-engine.service'] in directory '/root'
2019-05-09 14:32:03,344 [salt.state       :300 ][INFO    ][21265] {'heat-engine': True}
2019-05-09 14:32:03,345 [salt.state       :1951][INFO    ][21265] Completed state [heat-engine] at time 14:32:03.345232 duration_in_ms=79.098
2019-05-09 14:32:03,348 [salt.minion      :1711][INFO    ][21265] Returning information for job: 20190509143113570722
2019-05-09 14:33:16,078 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509143316073465
2019-05-09 14:33:16,102 [salt.minion      :1432][INFO    ][23696] Starting a new job with PID 23696
2019-05-09 14:33:22,694 [salt.state       :915 ][INFO    ][23696] Loading fresh modules for state activity
2019-05-09 14:33:22,818 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/init.sls'
2019-05-09 14:33:22,881 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/controller.sls'
2019-05-09 14:33:23,210 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/user.sls'
2019-05-09 14:33:23,959 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/db/offline_sync.sls'
2019-05-09 14:33:24,041 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/controller_mysql.sls'
2019-05-09 14:33:24,202 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/_ssl/rabbitmq.sls'
2019-05-09 14:33:24,289 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/volume.sls'
2019-05-09 14:33:25,923 [salt.state       :1780][INFO    ][23696] Running state [apache2] at time 14:33:25.923460
2019-05-09 14:33:25,923 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [apache2]
2019-05-09 14:33:25,924 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:33:26,524 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:26,524 [salt.state       :1951][INFO    ][23696] Completed state [apache2] at time 14:33:26.524845 duration_in_ms=601.386
2019-05-09 14:33:26,525 [salt.state       :1780][INFO    ][23696] Running state [openssl] at time 14:33:26.525149
2019-05-09 14:33:26,525 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [openssl]
2019-05-09 14:33:26,533 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:26,533 [salt.state       :1951][INFO    ][23696] Completed state [openssl] at time 14:33:26.533545 duration_in_ms=8.395
2019-05-09 14:33:26,534 [salt.state       :1780][INFO    ][23696] Running state [a2enmod ssl] at time 14:33:26.534209
2019-05-09 14:33:26,534 [salt.state       :1813][INFO    ][23696] Executing state cmd.run for [a2enmod ssl]
2019-05-09 14:33:26,534 [salt.state       :300 ][INFO    ][23696] /etc/apache2/mods-enabled/ssl.load exists
2019-05-09 14:33:26,534 [salt.state       :1951][INFO    ][23696] Completed state [a2enmod ssl] at time 14:33:26.534898 duration_in_ms=0.689
2019-05-09 14:33:26,535 [salt.state       :1780][INFO    ][23696] Running state [a2enmod rewrite] at time 14:33:26.535340
2019-05-09 14:33:26,535 [salt.state       :1813][INFO    ][23696] Executing state cmd.run for [a2enmod rewrite]
2019-05-09 14:33:26,535 [salt.state       :300 ][INFO    ][23696] /etc/apache2/mods-enabled/rewrite.load exists
2019-05-09 14:33:26,536 [salt.state       :1951][INFO    ][23696] Completed state [a2enmod rewrite] at time 14:33:26.535970 duration_in_ms=0.63
2019-05-09 14:33:26,536 [salt.state       :1780][INFO    ][23696] Running state [libapache2-mod-wsgi] at time 14:33:26.536436
2019-05-09 14:33:26,536 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-05-09 14:33:26,544 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:26,544 [salt.state       :1951][INFO    ][23696] Completed state [libapache2-mod-wsgi] at time 14:33:26.544304 duration_in_ms=7.868
2019-05-09 14:33:26,544 [salt.state       :1780][INFO    ][23696] Running state [a2enmod wsgi] at time 14:33:26.544767
2019-05-09 14:33:26,544 [salt.state       :1813][INFO    ][23696] Executing state cmd.run for [a2enmod wsgi]
2019-05-09 14:33:26,545 [salt.state       :300 ][INFO    ][23696] /etc/apache2/mods-enabled/wsgi.load exists
2019-05-09 14:33:26,545 [salt.state       :1951][INFO    ][23696] Completed state [a2enmod wsgi] at time 14:33:26.545398 duration_in_ms=0.63
2019-05-09 14:33:26,545 [salt.state       :1780][INFO    ][23696] Running state [a2enmod status -q] at time 14:33:26.545824
2019-05-09 14:33:26,546 [salt.state       :1813][INFO    ][23696] Executing state cmd.run for [a2enmod status -q]
2019-05-09 14:33:26,546 [salt.state       :300 ][INFO    ][23696] /etc/apache2/mods-enabled/status.load exists
2019-05-09 14:33:26,546 [salt.state       :1951][INFO    ][23696] Completed state [a2enmod status -q] at time 14:33:26.546499 duration_in_ms=0.675
2019-05-09 14:33:26,549 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:33:26.549604
2019-05-09 14:33:26,549 [salt.state       :1813][INFO    ][23696] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-05-09 14:33:26,550 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-05-09 14:33:26,550 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:33:26.550329 duration_in_ms=0.726
2019-05-09 14:33:26,550 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:33:26.550519
2019-05-09 14:33:26,550 [salt.state       :1813][INFO    ][23696] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-05-09 14:33:26,550 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-05-09 14:33:26,551 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:33:26.551108 duration_in_ms=0.588
2019-05-09 14:33:26,551 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:33:26.551289
2019-05-09 14:33:26,551 [salt.state       :1813][INFO    ][23696] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-05-09 14:33:26,551 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-05-09 14:33:26,551 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:33:26.551872 duration_in_ms=0.582
2019-05-09 14:33:26,552 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:33:26.552051
2019-05-09 14:33:26,552 [salt.state       :1813][INFO    ][23696] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-05-09 14:33:26,552 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-05-09 14:33:26,552 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:33:26.552685 duration_in_ms=0.634
2019-05-09 14:33:26,554 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 14:33:26.554627
2019-05-09 14:33:26,554 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-05-09 14:33:26,654 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-05-09 14:33:26,655 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 14:33:26.655460 duration_in_ms=100.83
2019-05-09 14:33:26,658 [salt.state       :1780][INFO    ][23696] Running state [a2enmod mpm_event] at time 14:33:26.658090
2019-05-09 14:33:26,658 [salt.state       :1813][INFO    ][23696] Executing state cmd.run for [a2enmod mpm_event]
2019-05-09 14:33:26,660 [salt.state       :300 ][INFO    ][23696] /etc/apache2/mods-enabled/mpm_event.load exists
2019-05-09 14:33:26,660 [salt.state       :1951][INFO    ][23696] Completed state [a2enmod mpm_event] at time 14:33:26.660458 duration_in_ms=2.368
2019-05-09 14:33:26,662 [salt.state       :1780][INFO    ][23696] Running state [apache_server_service_task] at time 14:33:26.662422
2019-05-09 14:33:26,663 [salt.state       :1813][INFO    ][23696] Executing state test.show_notification for [apache_server_service_task]
2019-05-09 14:33:26,663 [salt.state       :300 ][INFO    ][23696] Running apache.server.service
2019-05-09 14:33:26,664 [salt.state       :1951][INFO    ][23696] Completed state [apache_server_service_task] at time 14:33:26.664051 duration_in_ms=1.629
2019-05-09 14:33:26,665 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/ports.conf] at time 14:33:26.665363
2019-05-09 14:33:26,666 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/apache2/ports.conf]
2019-05-09 14:33:26,810 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/ports.conf is in the correct state
2019-05-09 14:33:26,812 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/ports.conf] at time 14:33:26.811959 duration_in_ms=146.594
2019-05-09 14:33:26,814 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/conf-available/security.conf] at time 14:33:26.813902
2019-05-09 14:33:26,815 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-05-09 14:33:26,957 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/conf-available/security.conf is in the correct state
2019-05-09 14:33:26,959 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/conf-available/security.conf] at time 14:33:26.958937 duration_in_ms=145.034
2019-05-09 14:33:26,974 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 14:33:26.974809
2019-05-09 14:33:26,975 [salt.state       :1813][INFO    ][23696] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-05-09 14:33:26,975 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-05-09 14:33:26,976 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 14:33:26.975979 duration_in_ms=1.17
2019-05-09 14:33:26,976 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:33:26.976653
2019-05-09 14:33:26,977 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-05-09 14:33:27,160 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-05-09 14:33:27,161 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:33:27.161191 duration_in_ms=184.537
2019-05-09 14:33:27,161 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:33:27.161851
2019-05-09 14:33:27,162 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-05-09 14:33:27,412 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-05-09 14:33:27,413 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:33:27.413342 duration_in_ms=251.49
2019-05-09 14:33:27,414 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:33:27.413993
2019-05-09 14:33:27,414 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-05-09 14:33:27,779 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-05-09 14:33:27,779 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:33:27.779184 duration_in_ms=365.191
2019-05-09 14:33:27,779 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:33:27.779644
2019-05-09 14:33:27,779 [salt.state       :1813][INFO    ][23696] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-05-09 14:33:27,781 [salt.state       :300 ][INFO    ][23696] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-05-09 14:33:27,781 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:33:27.781466 duration_in_ms=1.822
2019-05-09 14:33:27,784 [salt.state       :1780][INFO    ][23696] Running state [apache2] at time 14:33:27.784485
2019-05-09 14:33:27,784 [salt.state       :1813][INFO    ][23696] Executing state service.running for [apache2]
2019-05-09 14:33:27,785 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-05-09 14:33:27,827 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:33:27,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:33:27,867 [salt.state       :300 ][INFO    ][23696] The service apache2 is already running
2019-05-09 14:33:27,868 [salt.state       :1951][INFO    ][23696] Completed state [apache2] at time 14:33:27.868077 duration_in_ms=83.592
2019-05-09 14:33:27,869 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/conf-enabled/security.conf] at time 14:33:27.869672
2019-05-09 14:33:27,870 [salt.state       :1813][INFO    ][23696] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-05-09 14:33:27,872 [salt.state       :300 ][INFO    ][23696] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-05-09 14:33:27,873 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/conf-enabled/security.conf] at time 14:33:27.873212 duration_in_ms=3.54
2019-05-09 14:33:27,873 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:33:27.873552
2019-05-09 14:33:27,873 [salt.state       :1813][INFO    ][23696] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-05-09 14:33:27,874 [salt.state       :300 ][INFO    ][23696] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-05-09 14:33:27,874 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:33:27.874503 duration_in_ms=0.951
2019-05-09 14:33:27,881 [salt.state       :1780][INFO    ][23696] Running state [cinder] at time 14:33:27.881331
2019-05-09 14:33:27,881 [salt.state       :1813][INFO    ][23696] Executing state group.present for [cinder]
2019-05-09 14:33:27,882 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['groupadd', '-g 304', '-r', 'cinder'] in directory '/root'
2019-05-09 14:33:27,912 [salt.state       :300 ][INFO    ][23696] {'passwd': 'x', 'gid': 304, 'name': 'cinder', 'members': []}
2019-05-09 14:33:27,913 [salt.state       :1951][INFO    ][23696] Completed state [cinder] at time 14:33:27.913449 duration_in_ms=32.118
2019-05-09 14:33:27,914 [salt.state       :1780][INFO    ][23696] Running state [cinder] at time 14:33:27.914714
2019-05-09 14:33:27,915 [salt.state       :1813][INFO    ][23696] Executing state user.present for [cinder]
2019-05-09 14:33:27,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['useradd', '-s', '/bin/false', '-u', '304', '-g', '304', '-m', '-d', '/var/lib/cinder', '-r', 'cinder'] in directory '/root'
2019-05-09 14:33:27,965 [salt.state       :300 ][INFO    ][23696] {'shell': '/bin/false', 'workphone': '', 'uid': 304, 'passwd': 'x', 'roomnumber': '', 'groups': ['cinder'], 'home': '/var/lib/cinder', 'name': 'cinder', 'gid': 304, 'fullname': '', 'homephone': ''}
2019-05-09 14:33:27,966 [salt.state       :1951][INFO    ][23696] Completed state [cinder] at time 14:33:27.966034 duration_in_ms=51.319
2019-05-09 14:33:27,967 [salt.state       :1780][INFO    ][23696] Running state [cinder-scheduler] at time 14:33:27.967286
2019-05-09 14:33:27,967 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [cinder-scheduler]
2019-05-09 14:33:28,025 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['apt-cache', '-q', 'policy', 'cinder-scheduler'] in directory '/root'
2019-05-09 14:33:28,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:33:30,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:33:30,759 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'cinder-scheduler'] in directory '/root'
2019-05-09 14:33:31,134 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509143331123540
2019-05-09 14:33:31,159 [salt.minion      :1432][INFO    ][24162] Starting a new job with PID 24162
2019-05-09 14:33:31,195 [salt.minion      :1711][INFO    ][24162] Returning information for job: 20190509143331123540
2019-05-09 14:33:40,474 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:33:40,515 [salt.state       :300 ][INFO    ][23696] Made the following changes:
'python-cinder' changed from 'absent' to '2:13.0.4-0ubuntu3~u16.04+mcp70'
'cinder-common' changed from 'absent' to '2:13.0.4-0ubuntu3~u16.04+mcp70'
'cinder-scheduler' changed from 'absent' to '2:13.0.4-0ubuntu3~u16.04+mcp70'

2019-05-09 14:33:40,544 [salt.state       :915 ][INFO    ][23696] Loading fresh modules for state activity
2019-05-09 14:33:40,579 [salt.state       :1951][INFO    ][23696] Completed state [cinder-scheduler] at time 14:33:40.579405 duration_in_ms=12612.12
2019-05-09 14:33:40,584 [salt.state       :1780][INFO    ][23696] Running state [lvm2] at time 14:33:40.584590
2019-05-09 14:33:40,584 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [lvm2]
2019-05-09 14:33:41,235 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:41,235 [salt.state       :1951][INFO    ][23696] Completed state [lvm2] at time 14:33:41.235410 duration_in_ms=650.82
2019-05-09 14:33:41,236 [salt.state       :1780][INFO    ][23696] Running state [python-cinder] at time 14:33:41.236106
2019-05-09 14:33:41,236 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [python-cinder]
2019-05-09 14:33:41,244 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:41,244 [salt.state       :1951][INFO    ][23696] Completed state [python-cinder] at time 14:33:41.244199 duration_in_ms=8.093
2019-05-09 14:33:41,244 [salt.state       :1780][INFO    ][23696] Running state [gettext-base] at time 14:33:41.244631
2019-05-09 14:33:41,244 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [gettext-base]
2019-05-09 14:33:41,252 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:41,252 [salt.state       :1951][INFO    ][23696] Completed state [gettext-base] at time 14:33:41.252701 duration_in_ms=8.071
2019-05-09 14:33:41,253 [salt.state       :1780][INFO    ][23696] Running state [python-memcache] at time 14:33:41.253105
2019-05-09 14:33:41,253 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [python-memcache]
2019-05-09 14:33:41,260 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:41,261 [salt.state       :1951][INFO    ][23696] Completed state [python-memcache] at time 14:33:41.261073 duration_in_ms=7.967
2019-05-09 14:33:41,261 [salt.state       :1780][INFO    ][23696] Running state [python-pycadf] at time 14:33:41.261484
2019-05-09 14:33:41,261 [salt.state       :1813][INFO    ][23696] Executing state pkg.installed for [python-pycadf]
2019-05-09 14:33:41,269 [salt.state       :300 ][INFO    ][23696] All specified packages are already installed
2019-05-09 14:33:41,269 [salt.state       :1951][INFO    ][23696] Completed state [python-pycadf] at time 14:33:41.269483 duration_in_ms=7.999
2019-05-09 14:33:41,272 [salt.state       :1780][INFO    ][23696] Running state [cinder_controller_ssl_mysql] at time 14:33:41.272755
2019-05-09 14:33:41,272 [salt.state       :1813][INFO    ][23696] Executing state test.show_notification for [cinder_controller_ssl_mysql]
2019-05-09 14:33:41,273 [salt.state       :300 ][INFO    ][23696] Running cinder._ssl.controller_mysql
2019-05-09 14:33:41,273 [salt.state       :1951][INFO    ][23696] Completed state [cinder_controller_ssl_mysql] at time 14:33:41.273373 duration_in_ms=0.618
2019-05-09 14:33:41,273 [salt.state       :1780][INFO    ][23696] Running state [cinder_controller_ssl_rabbitmq] at time 14:33:41.273786
2019-05-09 14:33:41,274 [salt.state       :1813][INFO    ][23696] Executing state test.show_notification for [cinder_controller_ssl_rabbitmq]
2019-05-09 14:33:41,274 [salt.state       :300 ][INFO    ][23696] Running cinder._ssl.rabbitmq
2019-05-09 14:33:41,274 [salt.state       :1951][INFO    ][23696] Completed state [cinder_controller_ssl_rabbitmq] at time 14:33:41.274417 duration_in_ms=0.632
2019-05-09 14:33:41,275 [salt.state       :1780][INFO    ][23696] Running state [/etc/cinder/cinder.conf] at time 14:33:41.275160
2019-05-09 14:33:41,275 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/cinder/cinder.conf]
2019-05-09 14:33:41,303 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/files/rocky/cinder.conf.controller.Debian'
2019-05-09 14:33:41,558 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/files/backend/_lvm.conf'
2019-05-09 14:33:41,743 [salt.state       :300 ][INFO    ][23696] File changed:
--- 
+++ 
@@ -1,15 +1,4401 @@
+
 [DEFAULT]
+
+#
+# From cinder
+#
+
 rootwrap_config = /etc/cinder/rootwrap.conf
 api_paste_confg = /etc/cinder/api-paste.ini
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+rpc_response_timeout = 3600
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+control_exchange = cinder
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+# The maximum number of items that a collection resource returns in a single
+# response (integer value)
+#osapi_max_limit = 1000
+
+# Json file indicating user visible filter parameters for list queries. (string
+# value)
+# Deprecated group/name - [DEFAULT]/query_volume_filters
+#resource_query_filters_file = /etc/cinder/resource_filters.json
+
+# DEPRECATED: Volume filter options which non-admin user could use to query
+# volumes. Default values are: ['name', 'status', 'metadata',
+# 'availability_zone' ,'bootable', 'group_id'] (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#query_volume_filters = name,status,metadata,availability_zone,bootable,group_id
+
+# DEPRECATED: Allow the ability to modify the extra-spec settings of an in-use
+# volume-type. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#allow_inuse_volume_type_modification = false
+
+# Treat X-Forwarded-For as the canonical remote address. Only enable this if
+# you have a sanitizing proxy. (boolean value)
+#use_forwarded_for = false
+
+# Public url to use for versions endpoint. The default is None, which will use
+# the request's host_url attribute to populate the URL base. If Cinder is
+# operating behind a proxy, you will want to change this to represent the
+# proxy's URL. (string value)
+#public_endpoint = <None>
+
+# Backup services use same backend. (boolean value)
+#backup_use_same_host = false
+
+# Compression algorithm (None to disable) (string value)
+# Possible values:
+# none - <No description provided>
+# off - <No description provided>
+# no - <No description provided>
+# zlib - <No description provided>
+# gzip - <No description provided>
+# bz2 - <No description provided>
+# bzip2 - <No description provided>
+#backup_compression_algorithm = zlib
+
+# Backup metadata version to be used when backing up volume metadata. If this
+# number is bumped, make sure the service doing the restore supports the new
+# version. (integer value)
+#backup_metadata_version = 2
+
+# The number of chunks or objects, for which one Ceilometer notification will
+# be sent (integer value)
+#backup_object_number_per_notification = 10
+
+# Interval, in seconds, between two progress notifications reporting the backup
+# status (integer value)
+#backup_timer_interval = 120
+
+# Ceph configuration file to use. (string value)
+#backup_ceph_conf = /etc/ceph/ceph.conf
+
+
+# The Ceph user to connect with. Default here is to use the same user as for
+# Cinder volumes. If not using cephx this should be set to None. (string value)
+#backup_ceph_user = cinder
+
+# The chunk size, in bytes, that a backup is broken into before transfer to the
+# Ceph object store. (integer value)
+#backup_ceph_chunk_size = 134217728
+
+# The Ceph pool where volume backups are stored. (string value)
+#backup_ceph_pool = backups
+
+# RBD stripe unit to use when creating a backup image. (integer value)
+#backup_ceph_stripe_unit = 0
+
+# RBD stripe count to use when creating a backup image. (integer value)
+#backup_ceph_stripe_count = 0
+
+# If True, apply JOURNALING and EXCLUSIVE_LOCK feature bits to the backup RBD
+# objects to allow mirroring (boolean value)
+#backup_ceph_image_journals = false
+
+# If True, always discard excess bytes when restoring volumes i.e. pad with
+# zeroes. (boolean value)
+#restore_discard_excess_bytes = true
+
+# The GCS bucket to use. (string value)
+#backup_gcs_bucket = <None>
+
+# The size in bytes of GCS backup objects. (integer value)
+#backup_gcs_object_size = 52428800
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_gcs_object_size has to be multiple of backup_gcs_block_size. (integer
+# value)
+#backup_gcs_block_size = 32768
+
+# GCS object will be downloaded in chunks of bytes. (integer value)
+#backup_gcs_reader_chunk_size = 2097152
+
+# GCS object will be uploaded in chunks of bytes. Pass in a value of -1 if the
+# file is to be uploaded as a single chunk. (integer value)
+#backup_gcs_writer_chunk_size = 2097152
+
+# Number of times to retry. (integer value)
+#backup_gcs_num_retries = 3
+
+# List of GCS error codes. (list value)
+#backup_gcs_retry_error_codes = 429
+
+# Location of GCS bucket. (string value)
+#backup_gcs_bucket_location = US
+
+# Storage class of GCS bucket. (string value)
+#backup_gcs_storage_class = NEARLINE
+
+# Absolute path of GCS service account credential file. (string value)
+#backup_gcs_credential_file = <None>
+
+# Owner project id for GCS bucket. (string value)
+#backup_gcs_project_id = <None>
+
+# Http user-agent string for gcs api. (string value)
+#backup_gcs_user_agent = gcscinder
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the GCS backend storage. The default
+# value is True to enable the timer. (boolean value)
+#backup_gcs_enable_progress_timer = true
+
+# URL for http proxy access. (uri value)
+#backup_gcs_proxy_url = <None>
+
+# Base dir containing mount point for gluster share. (string value)
+#glusterfs_backup_mount_point = $state_path/backup_mount
+
+# GlusterFS share in <hostname|ipv4addr|ipv6addr>:<gluster_vol_name> format.
+# Eg: 1.2.3.4:backup_vol (string value)
+#glusterfs_backup_share = <None>
+
+# Base dir containing mount point for NFS share. (string value)
+#backup_mount_point_base = $state_path/backup_mount
+
+# NFS share in hostname:path, ipv4addr:path, or "[ipv6addr]:path" format.
+# (string value)
+#backup_share = <None>
+
+# Mount options passed to the NFS client. See NFS man page for details. (string
+# value)
+#backup_mount_options = <None>
+
+# The maximum size in bytes of the files used to hold backups. If the volume
+# being backed up exceeds this size, then it will be backed up into multiple
+# files.backup_file_size must be a multiple of backup_sha_block_size_bytes.
+# (integer value)
+#backup_file_size = 1999994880
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_file_size has to be multiple of backup_sha_block_size_bytes. (integer
+# value)
+#backup_sha_block_size_bytes = 32768
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the backend storage. The default
+# value is True to enable the timer. (boolean value)
+#backup_enable_progress_timer = true
+
+# Path specifying where to store backups. (string value)
+#backup_posix_path = $state_path/backup
+
+# Custom directory to use for backups. (string value)
+#backup_container = <None>
+
+# The URL of the Swift endpoint (uri value)
+#backup_swift_url = <None>
+
+# The URL of the Keystone endpoint (uri value)
+#backup_swift_auth_url = <None>
+
+# Info to match when looking for swift in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if backup_swift_url is unset (string value)
+#swift_catalog_info = object-store:swift:publicURL
+
+# Info to match when looking for keystone in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if backup_swift_auth_url is unset (string value)
+#keystone_catalog_info = identity:Identity Service:publicURL
+
+# Swift authentication mechanism (per_user or single_user). (string value)
+# Possible values:
+# per_user - <No description provided>
+# single_user - <No description provided>
+#backup_swift_auth = per_user
+
+# Swift authentication version. Specify "1" for auth 1.0, or "2" for auth 2.0
+# or "3" for auth 3.0 (string value)
+#backup_swift_auth_version = 1
+
+# Swift tenant/account name. Required when connecting to an auth 2.0 system
+# (string value)
+#backup_swift_tenant = <None>
+
+# Swift user domain name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_user_domain = <None>
+
+# Swift project domain name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_project_domain = <None>
+
+# Swift project/account name. Required when connecting to an auth 3.0 system
+# (string value)
+#backup_swift_project = <None>
+
+# Swift user name (string value)
+#backup_swift_user = <None>
+
+# Swift key for authentication (string value)
+#backup_swift_key = <None>
+
+# The default Swift container to use (string value)
+#backup_swift_container = volumebackups
+
+# The size in bytes of Swift backup objects (integer value)
+#backup_swift_object_size = 52428800
+
+# The size in bytes that changes are tracked for incremental backups.
+# backup_swift_object_size has to be multiple of backup_swift_block_size.
+# (integer value)
+#backup_swift_block_size = 32768
+
+# The number of retries to make for Swift operations (integer value)
+#backup_swift_retry_attempts = 3
+
+# The backoff time in seconds between Swift retries (integer value)
+#backup_swift_retry_backoff = 2
+
+# Enable or Disable the timer to send the periodic progress notifications to
+# Ceilometer when backing up the volume to the Swift backend storage. The
+# default value is True to enable the timer. (boolean value)
+#backup_swift_enable_progress_timer = true
+
+# Location of the CA certificate file to use for swift client requests. (string
+# value)
+#backup_swift_ca_cert_file = <None>
+
+# Bypass verification of server certificate when making SSL connection to
+# Swift. (boolean value)
+#backup_swift_auth_insecure = false
+
+# Volume prefix for the backup id when backing up to TSM (string value)
+#backup_tsm_volume_prefix = backup
+
+# TSM password for the running username (string value)
+#backup_tsm_password = password
+
+# Enable or Disable compression for backups (boolean value)
+#backup_tsm_compression = true
+
+# Driver to use for backups. (string value)
+#backup_driver = cinder.backup.drivers.swift.SwiftBackupDriver
+
+# Offload pending backup delete during backup service startup. If false, the
+# backup service will remain down until all pending backups are deleted.
+# (boolean value)
+#backup_service_inithost_offload = true
+
+# Size of the native threads pool for the backups.  Most backup drivers rely
+# heavily on this, it can be decreased for specific drivers that don't.
+# (integer value)
+# Minimum value: 20
+#backup_native_threads_pool_size = 60
+
+# Number of backup processes to launch. Improves performance with concurrent
+# backups. (integer value)
+# Minimum value: 1
+# Maximum value: 4
+#backup_workers = 1
+
+# Name of this cluster. Used to group volume hosts that share the same backend
+# configurations to work in HA Active-Active mode.  Active-Active is not yet
+# supported. (string value)
+#cluster = <None>
+
+# Top-level directory for maintaining cinder's state (string value)
+state_path = /var/lib/cinder
+
+# IP address of this host (host address value)
+#my_ip = <HOST_IP_ADDRESS>
+
+# A list of the URLs of glance API servers available to cinder
+# ([http[s]://][hostname|ip]:port). If protocol is not specified it defaults to
+# http. (list value)
+glance_api_servers = http://192.168.10.35:9292
+
+# Number retries when downloading an image from glance (integer value)
+# Minimum value: 0
+glance_num_retries = 0
+
+# Allow to perform insecure SSL (https) requests to glance (https will be used
+# but cert validation will not be performed). (boolean value)
+#glance_api_insecure = false
+
+# Enables or disables negotiation of SSL layer compression. In some cases
+# disabling compression can improve data throughput, such as when high network
+# bandwidth is available and you use compressed image formats like qcow2.
+# (boolean value)
+#glance_api_ssl_compression = false
+
+# Location of ca certificates file to use for glance client requests. (string
+# value)
+
+# http/https timeout value for glance operations. If no value (None) is
+# supplied here, the glanceclient default value is used. (integer value)
+#glance_request_timeout = <None>
+
+# DEPRECATED: Deploy v2 of the Cinder API. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#enable_v2_api = true
+
+# Deploy v3 of the Cinder API. (boolean value)
+enable_v3_api = true
+
+# Enables or disables rate limit of the API. (boolean value)
+#api_rate_limit = true
+
+# Specify list of extensions to load when using osapi_volume_extension option
+# with cinder.api.contrib.select_extensions (list value)
+#osapi_volume_ext_list =
+
+# osapi volume extension to load (multi valued)
+osapi_volume_extension = cinder.api.contrib.standard_extensions
+
+# Full class name for the Manager for volume (string value)
+#volume_manager = cinder.volume.manager.VolumeManager
+
+# Full class name for the Manager for volume backup (string value)
+#backup_manager = cinder.backup.manager.BackupManager
+
+# Full class name for the Manager for scheduler (string value)
+#scheduler_manager = cinder.scheduler.manager.SchedulerManager
+
+# Name of this node.  This can be an opaque identifier. It is not necessarily a
+# host name, FQDN, or IP address. (host address value)
+#host = localhost
+
+# Availability zone of this node. Can be overridden per volume backend with the
+# option "backend_availability_zone". (string value)
+#storage_availability_zone = nova
+
+# Default availability zone for new volumes. If not set, the
+# storage_availability_zone option value is used as the default for new
+# volumes. (string value)
+#default_availability_zone = <None>
+
+# If the requested Cinder availability zone is unavailable, fall back to the
+# value of default_availability_zone, then storage_availability_zone, instead
+# of failing. (boolean value)
+allow_availability_zone_fallback = True
+
+# Default volume type to use (string value)
+#default_volume_type = <None>
+
+# Default group type to use (string value)
+#default_group_type = <None>
+
+# Time period for which to generate volume usages. The options are hour, day,
+# month, or year. (string value)
+#volume_usage_audit_period = month
+
+# Path to the rootwrap configuration file to use for running commands as root
+# (string value)
+#rootwrap_config = /etc/cinder/rootwrap.conf
+
+# Enable monkey patching (boolean value)
+#monkey_patch = false
+
+# List of modules/decorators to monkey patch (list value)
+#monkey_patch_modules =
+
+# Maximum time since last check-in for a service to be considered up (integer
+# value)
+#service_down_time = 60
+
+# The full class name of the volume API class to use (string value)
+#volume_api_class = cinder.volume.api.API
+
+# The full class name of the volume backup API class (string value)
+#backup_api_class = cinder.backup.api.API
+
+# The strategy to use for auth. Supports noauth or keystone. (string value)
+# Possible values:
+# noauth - <No description provided>
+# keystone - <No description provided>
+auth_strategy = keystone
+
+# A list of backend names to use. These backend names should be backed by a
+# unique [CONFIG] group with its options (list value)
+#enabled_backends = <None>
+default_volume_type=lvm-driver
+
+enabled_backends=lvm-driver
+
+
+# Whether snapshots count against gigabyte quota (boolean value)
+#no_snapshot_gb_quota = false
+
+# The full class name of the volume transfer API class (string value)
+#transfer_api_class = cinder.transfer.api.API
+
+# The full class name of the consistencygroup API class (string value)
+#consistencygroup_api_class = cinder.consistencygroup.api.API
+
+# The full class name of the group API class (string value)
+#group_api_class = cinder.group.api.API
+
+# The full class name of the compute API class to use (string value)
+#compute_api_class = cinder.compute.nova.API
+
+# ID of the project which will be used as the Cinder internal tenant. (string
+# value)
+#cinder_internal_tenant_project_id = <None>
+
+# ID of the user to be used in volume operations as the Cinder internal tenant.
+# (string value)
+#cinder_internal_tenant_user_id = <None>
+
+# Services to be added to the available pool on create (boolean value)
+#enable_new_services = true
+
+# Template string to be used to generate volume names (string value)
+volume_name_template = volume-%s
+
+# Template string to be used to generate snapshot names (string value)
+#snapshot_name_template = snapshot-%s
+
+# Template string to be used to generate backup names (string value)
+#backup_name_template = backup-%s
+
+# Driver to use for database access (string value)
+#db_driver = cinder.db
+
+# A list of url schemes that can be downloaded directly via the direct_url.
+# Currently supported schemes: [file, cinder]. (list value)
+#allowed_direct_url_schemes =
+
+# Info to match when looking for glance in the service catalog. Format is:
+# separated values of the form: <service_type>:<service_name>:<endpoint_type> -
+# Only used if glance_api_servers are not provided. (string value)
+#glance_catalog_info = image:glance:publicURL
+
+# Default core properties of image (list value)
+#glance_core_properties = checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size
+
+# Directory used for temporary storage during image conversion (string value)
+#image_conversion_dir = $state_path/conversion
+
+# message minimum life in seconds. (integer value)
+#message_ttl = 2592000
+
+# interval between periodic task runs to clean expired messages in seconds.
+# (integer value)
+#message_reap_interval = 86400
+
+# Number of volumes allowed per project (integer value)
+#quota_volumes = 10
+
+# Number of volume snapshots allowed per project (integer value)
+#quota_snapshots = 10
+
+# Number of consistencygroups allowed per project (integer value)
+#quota_consistencygroups = 10
+
+# Number of groups allowed per project (integer value)
+#quota_groups = 10
+
+# Total amount of storage, in gigabytes, allowed for volumes and snapshots per
+# project (integer value)
+#quota_gigabytes = 1000
+
+# Number of volume backups allowed per project (integer value)
+#quota_backups = 10
+
+# Total amount of storage, in gigabytes, allowed for backups per project
+# (integer value)
+#quota_backup_gigabytes = 1000
+
+# Number of seconds until a reservation expires (integer value)
+#reservation_expire = 86400
+
+# Interval between periodic task runs to clean expired reservations in seconds.
+# (integer value)
+#reservation_clean_interval = $reservation_expire
+
+# Count of reservations until usage is refreshed (integer value)
+#until_refresh = 0
+
+# Number of seconds between subsequent usage refreshes (integer value)
+#max_age = 0
+
+# Default driver to use for quota checks (string value)
+#quota_driver = cinder.quota.DbQuotaDriver
+
+# Enables or disables use of default quota class with default quota. (boolean
+# value)
+#use_default_quota_class = true
+
+# Max size allowed per volume, in gigabytes (integer value)
+#per_volume_size_limit = -1
+
+# The scheduler host manager class to use (string value)
+#scheduler_host_manager = cinder.scheduler.host_manager.HostManager
+
+# Maximum number of attempts to schedule a volume (integer value)
+#scheduler_max_attempts = 3
+
+# Which filter class names to use for filtering hosts when not specified in the
+# request. (list value)
+#scheduler_default_filters = AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter
+
+# Which weigher class names to use for weighing hosts. (list value)
+#scheduler_default_weighers = CapacityWeigher
+
+# Which handler to use for selecting the host/pool after weighing (string
+# value)
+#scheduler_weight_handler = cinder.scheduler.weights.OrderedHostWeightHandler
+
+# Default scheduler driver to use (string value)
+#scheduler_driver = cinder.scheduler.filter_scheduler.FilterScheduler
+
+# Absolute path to scheduler configuration JSON file. (string value)
+#scheduler_json_config_location =
+
+# Multiplier used for weighing free capacity. Negative numbers mean to stack vs
+# spread. (floating point value)
+#capacity_weight_multiplier = 1.0
+
+# Multiplier used for weighing allocated capacity. Positive numbers mean to
+# stack vs spread. (floating point value)
+#allocated_capacity_weight_multiplier = -1.0
+
+# Multiplier used for weighing volume number. Negative numbers mean to spread
+# vs stack. (floating point value)
+#volume_number_multiplier = -1.0
+
+# Interval, in seconds, between nodes reporting state to datastore (integer
+# value)
+#report_interval = 10
+
+# Interval, in seconds, between running periodic tasks (integer value)
+#periodic_interval = 60
+
+# Range, in seconds, to randomly delay when starting the periodic task
+# scheduler to reduce stampeding. (Disable by setting to 0) (integer value)
+#periodic_fuzzy_delay = 60
+
+# IP address on which OpenStack Volume API listens (string value)
+osapi_volume_listen = 192.168.10.37
+
+# Port on which OpenStack Volume API listens (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#osapi_volume_listen_port = 8776
+
+# Number of workers for OpenStack Volume API service. The default is equal to
+# the number of CPUs available. (integer value)
+osapi_volume_workers = 4
+
+# Wraps the socket in a SSL context if True is set. A certificate file and key
+# file must be specified. (boolean value)
+#osapi_volume_use_ssl = false
+
+# Option to enable strict host key checking.  When set to "True" Cinder will
+# only connect to systems with a host key present in the configured
+# "ssh_hosts_key_file".  When set to "False" the host key will be saved upon
+# first connection and used for subsequent connections.  Default=False (boolean
+# value)
+#strict_ssh_host_key_policy = false
+
+# File containing SSH host keys for the systems with which Cinder needs to
+# communicate.  OPTIONAL: Default=$state_path/ssh_known_hosts (string value)
+#ssh_hosts_key_file = $state_path/ssh_known_hosts
+
+# The number of characters in the salt. (integer value)
+#volume_transfer_salt_length = 8
+
+# The number of characters in the autogenerated auth key. (integer value)
+#volume_transfer_key_length = 16
+
+# Enables the Force option on upload_to_image. This enables running
+# upload_volume on in-use volumes for backends that support it. (boolean value)
+#enable_force_upload = false
+enable_force_upload = false
+
+# Create volume from snapshot at the host where snapshot resides (boolean
+# value)
+#snapshot_same_host = true
+
+# Ensure that the new volumes are the same AZ as snapshot or source volume
+# (boolean value)
+#cloned_volume_same_az = true
+
+# Cache volume availability zones in memory for the provided duration in
+# seconds (integer value)
+#az_cache_duration = 3600
+
+# Number of times to attempt to run flakey shell commands (integer value)
+#num_shell_tries = 3
+
+# The percentage of backend capacity is reserved (integer value)
+# Minimum value: 0
+# Maximum value: 100
+#reserved_percentage = 0
+
+# Prefix for iSCSI volumes (string value)
+# Deprecated group/name - [DEFAULT]/iscsi_target_prefix
+#target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSCSI daemon is listening on (string value)
+# Deprecated group/name - [DEFAULT]/iscsi_ip_address
+#target_ip_address = $my_ip
+
+# The list of secondary IP addresses of the iSCSI daemon (list value)
+#iscsi_secondary_ip_addresses =
+
+# The port that the iSCSI daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [DEFAULT]/iscsi_port
+#target_port = 3260
+
+# The maximum number of times to rescan targets to find volume (integer value)
+#num_volume_device_scan_tries = 3
+
+# The backend name for a given driver implementation (string value)
+volume_backend_name = DEFAULT
+
+# Do we attach/detach volumes in cinder using multipath for volume to image and
+# image to volume transfers? (boolean value)
+#use_multipath_for_image_xfer = false
+
+# If this is set to True, attachment of volumes for image transfer will be
+# aborted when multipathd is not running. Otherwise, it will fallback to single
+# path. (boolean value)
+#enforce_multipath_for_image_xfer = false
+
+# Method used to wipe old volumes (string value)
+# Possible values:
+# none - <No description provided>
+# zero - <No description provided>
+#volume_clear = zero
+volume_clear = none
+
+# Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 => all
+# (integer value)
+# Maximum value: 1024
+#volume_clear_size = 0
+
+# The flag to pass to ionice to alter the i/o priority of the process used to
+# zero a volume after deletion, for example "-c3" for idle only priority.
+# (string value)
+#volume_clear_ionice = <None>
+
+# Target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI
+# support, scstadmin for SCST target support, ietadm for iSCSI Enterprise
+# Target, iscsictl for Chelsio iSCSI Target, nvmet for NVMEoF support, or fake
+# for testing. (string value)
+# Possible values:
+# tgtadm - <No description provided>
+# lioadm - <No description provided>
+# scstadmin - <No description provided>
+# iscsictl - <No description provided>
+# ietadm - <No description provided>
+# nvmet - <No description provided>
+# fake - <No description provided>
+# Deprecated group/name - [DEFAULT]/iscsi_helper
+target_helper = tgtadm
+
+# Volume configuration file storage directory (string value)
+volumes_dir = /var/lib/cinder/volumes
+
+# IET configuration file (string value)
+#iet_conf = /etc/iet/ietd.conf
+
+# Chiscsi (CXT) global defaults configuration file (string value)
+#chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf
+
+# Sets the behavior of the iSCSI target to either perform blockio or fileio
+# optionally, auto can be set and Cinder will autodetect type of backing device
+# (string value)
+# Possible values:
+# blockio - <No description provided>
+# fileio - <No description provided>
+# auto - <No description provided>
+#iscsi_iotype = fileio
+
+# The default block size used when copying/clearing volumes (string value)
+#volume_dd_blocksize = 1M
+
+# The blkio cgroup name to be used to limit bandwidth of volume copy (string
+# value)
+#volume_copy_blkio_cgroup_name = cinder-volume-copy
+
+# The upper limit of bandwidth of volume copy. 0 => unlimited (integer value)
+#volume_copy_bps_limit = 0
+
+# Sets the behavior of the iSCSI target to either perform write-back(on) or
+# write-through(off). This parameter is valid if target_helper is set to
+# tgtadm. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+#iscsi_write_cache = on
+
+# Sets the target-specific flags for the iSCSI target. Only used for tgtadm to
+# specify backing device flags using bsoflags option. The specified string is
+# passed as is to the underlying tool. (string value)
+#iscsi_target_flags =
+
+# Determines the target protocol for new volumes, created with tgtadm, lioadm
+# and nvmet target helpers. In order to enable RDMA, this parameter should be
+# set with the value "iser". The supported iSCSI protocol values are "iscsi"
+# and "iser", in case of nvmet target set to "nvmet_rdma". (string value)
+# Possible values:
+# iscsi - <No description provided>
+# iser - <No description provided>
+# nvmet_rdma - <No description provided>
+# Deprecated group/name - [DEFAULT]/iscsi_protocol
+#target_protocol = iscsi
+
+# The path to the client certificate key for verification, if the driver
+# supports it. (string value)
+#driver_client_cert_key = <None>
+
+# The path to the client certificate for verification, if the driver supports
+# it. (string value)
+#driver_client_cert = <None>
+
+# Tell driver to use SSL for connection to backend storage if the driver
+# supports it. (boolean value)
+#driver_use_ssl = false
+
+# Representation of the over subscription ratio when thin provisioning is
+# enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times
+# of the total physical capacity. If the ratio is 10.5, it means provisioned
+# capacity can be 10.5 times of the total physical capacity. A ratio of 1.0
+# means provisioned capacity cannot exceed the total physical capacity. If
+# ratio is 'auto', Cinder will automatically calculate the ratio based on the
+# provisioned capacity and the used space. If not set to auto, the ratio has to
+# be a minimum of 1.0. (string value)
+#max_over_subscription_ratio = 20.0
+
+# Certain ISCSI targets have predefined target names, SCST target driver uses
+# this name. (string value)
+#scst_target_iqn_name = <None>
+
+# SCST target implementation can choose from multiple SCST target drivers.
+# (string value)
+#scst_target_driver = iscsi
+
+# Option to enable/disable CHAP authentication for targets. (boolean value)
+#use_chap_auth = false
+
+# CHAP user name. (string value)
+#chap_username =
+
+# Password for specified CHAP account name. (string value)
+#chap_password =
+
+# Namespace for driver private data values to be saved in. (string value)
+#driver_data_namespace = <None>
+
+# String representation for an equation that will be used to filter hosts. Only
+# used when the driver filter is set to be used by the Cinder scheduler.
+# (string value)
+#filter_function = <None>
+
+# String representation for an equation that will be used to determine the
+# goodness of a host. Only used when using the goodness weigher is set to be
+# used by the Cinder scheduler. (string value)
+#goodness_function = <None>
+
+# If set to True the http client will validate the SSL certificate of the
+# backend endpoint. (boolean value)
+#driver_ssl_cert_verify = false
+
+# Can be used to specify a non default path to a CA_BUNDLE file or directory
+# with certificates of trusted CAs, which will be used to validate the backend
+# (string value)
+#driver_ssl_cert_path = <None>
+
+# List of options that control which trace info is written to the DEBUG log
+# level to assist developers. Valid values are method and api. (list value)
+#trace_flags = <None>
+
+# Multi opt of dictionaries to represent a replication target device.  This
+# option may be specified multiple times in a single config section to specify
+# multiple replication target devices.  Each entry takes the standard dict
+# config form: replication_device =
+# target_device_id:<required>,key1:value1,key2:value2... (dict value)
+#replication_device = <None>
+
+# If set to True, upload-to-image in raw format will create a cloned volume and
+# register its location to the image service, instead of uploading the volume
+# content. The cinder backend and locations support must be enabled in the
+# image service. (boolean value)
+#image_upload_use_cinder_backend = false
+
+# If set to True, the image volume created by upload-to-image will be placed in
+# the internal tenant. Otherwise, the image volume is created in the current
+# context's tenant. (boolean value)
+#image_upload_use_internal_tenant = false
+
+# Enable the image volume cache for this backend. (boolean value)
+#image_volume_cache_enabled = false
+
+# Max size of the image volume cache for this backend in GB. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_size_gb = 0
+
+# Max number of entries allowed in the image volume cache. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_count = 0
+
+# Report to clients of Cinder that the backend supports discard (aka.
+# trim/unmap). This will not actually change the behavior of the backend or the
+# client directly, it will only notify that it can be used. (boolean value)
+#report_discard_supported = false
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#storage_protocol = iscsi
+
+# If this is set to True, a temporary snapshot will be created for performing
+# non-disruptive backups. Otherwise a temporary volume will be cloned in order
+# to perform a backup. (boolean value)
+#backup_use_temp_snapshot = false
+
+# Set this to True when you want to allow an unsupported driver to start.
+# Drivers that haven't maintained a working CI system and testing are marked as
+# unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+# Availability zone for this volume backend. If not set, the
+# storage_availability_zone option value is used as the default for all
+# backends. (string value)
+#backend_availability_zone = <None>
+
+# The maximum number of times to rescan iSER targetto find volume (integer
+# value)
+#num_iser_scan_tries = 3
+
+# Prefix for iSER volumes (string value)
+#iser_target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSER daemon is listening on (string value)
+#iser_ip_address = $my_ip
+
+# The port that the iSER daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#iser_port = 3260
+
+# The name of the iSER target user-land tool to use (string value)
+#iser_helper = tgtadm
+
+# The port that the NVMe target is listening on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nvmet_port_id = 1
+
+# The namespace id associated with the subsystem that will be created with the
+# path for the LVM volume. (integer value)
+#nvmet_ns_id = 10
+
+# DataCore virtual disk type (single/mirrored). Mirrored virtual disks require
+# two storage servers in the server group. (string value)
+# Possible values:
+# single - <No description provided>
+# mirrored - <No description provided>
+#datacore_disk_type = single
+
+# DataCore virtual disk storage profile. (string value)
+#datacore_storage_profile = <None>
+
+# List of DataCore disk pools that can be used by volume driver. (list value)
+#datacore_disk_pools =
+
+# Seconds to wait for a response from a DataCore API call. (integer value)
+# Minimum value: 1
+#datacore_api_timeout = 300
+
+# Seconds to wait for DataCore virtual disk to come out of the "Failed" state.
+# (integer value)
+# Minimum value: 0
+#datacore_disk_failed_delay = 15
+
+# List of iSCSI targets that cannot be used to attach volume. To prevent the
+# DataCore iSCSI volume driver from using some front-end targets in volume
+# attachment, specify this option and list the iqn and target machine for each
+# target as the value, such as <iqn:target name>, <iqn:target name>,
+# <iqn:target name>. (list value)
+#datacore_iscsi_unallowed_targets =
+
+# Configure CHAP authentication for iSCSI connections. (boolean value)
+#datacore_iscsi_chap_enabled = false
+
+# iSCSI CHAP authentication password storage file. (string value)
+#datacore_iscsi_chap_storage = <None>
+
+# Storage system autoexpand parameter for volumes (True/False) (boolean value)
+#instorage_mcs_vol_autoexpand = true
+
+# Storage system compression option for volumes (boolean value)
+#instorage_mcs_vol_compression = false
+
+# Enable InTier for volumes (boolean value)
+#instorage_mcs_vol_intier = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#instorage_mcs_allow_tenant_qos = false
+
+# Storage system grain size parameter for volumes (32/64/128/256) (integer
+# value)
+# Minimum value: 32
+# Maximum value: 256
+#instorage_mcs_vol_grainsize = 256
+
+# Storage system space-efficiency parameter for volumes (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#instorage_mcs_vol_rsize = 2
+
+# Storage system threshold for volume capacity warnings (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#instorage_mcs_vol_warning = 0
+
+# Maximum number of seconds to wait for LocalCopy to be prepared. (integer
+# value)
+# Minimum value: 1
+# Maximum value: 600
+#instorage_mcs_localcopy_timeout = 120
+
+# Specifies the InStorage LocalCopy copy rate to be used when creating a full
+# volume copy. The default is rate is 50, and the valid rates are 1-100.
+# (integer value)
+# Minimum value: 1
+# Maximum value: 100
+#instorage_mcs_localcopy_rate = 50
+
+# The I/O group in which to allocate volumes. It can be a comma-separated list
+# in which case the driver will select an io_group based on least number of
+# volumes associated with the io_group. (string value)
+#instorage_mcs_vol_iogrp = 0
+
+# Specifies secondary management IP or hostname to be used if san_ip is invalid
+# or becomes inaccessible. (string value)
+#instorage_san_secondary_ip = <None>
+
+# Comma separated list of storage system storage pools for volumes. (list
+# value)
+#instorage_mcs_volpool_name = volpool
+
+# Configure CHAP authentication for iSCSI connections (Default: Enabled)
+# (boolean value)
+#instorage_mcs_iscsi_chap_enabled = true
+
+# The StorPool template for volumes with no type. (string value)
+#storpool_template = <None>
+
+# The default StorPool chain replication value.  Used when creating a volume
+# with no specified type if storpool_template is not set.  Also used for
+# calculating the apparent free space reported in the stats. (integer value)
+#storpool_replication = 3
+
+# Create sparse Lun. (boolean value)
+#vrts_lun_sparse = true
+
+# VA config file. (string value)
+#vrts_target_config = /etc/cinder/vrts_target.xml
+
+# Timeout for creating the volume to migrate to when performing volume
+# migration (seconds) (integer value)
+#migration_create_volume_timeout_secs = 300
+
+# Offload pending volume delete during volume service startup (boolean value)
+#volume_service_inithost_offload = false
+
+# FC Zoning mode configured, only 'fabric' is supported now. (string value)
+#zoning_mode = <None>
+
+# Sets the value of TCP_KEEPALIVE (True/False) for each server socket. (boolean
+# value)
+#tcp_keepalive = true
+
+# Sets the value of TCP_KEEPINTVL in seconds for each server socket. Not
+# supported on OS X. (integer value)
+#tcp_keepalive_interval = <None>
+
+# Sets the value of TCP_KEEPCNT for each server socket. Not supported on OS X.
+# (integer value)
+#tcp_keepalive_count = <None>
+
+
+[backend]
+
+#
+# From cinder
+#
+
+# Backend override of host value. (string value)
+#backend_host = <None>
+[lvm-driver]
+host=ctl02
+volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+volume_backend_name=lvm-driver
 iscsi_helper = tgtadm
-volume_name_template = volume-%s
-volume_group = cinder-volumes
-verbose = True
-auth_strategy = keystone
-state_path = /var/lib/cinder
-lock_path = /var/lock/cinder
-volumes_dir = /var/lib/cinder/volumes
-enabled_backends = lvm
+volume_group = cinder-volume
+
+
+[backend_defaults]
+
+#
+# From cinder
+#
+
+# Number of times to attempt to run flakey shell commands (integer value)
+#num_shell_tries = 3
+
+# The percentage of backend capacity is reserved (integer value)
+# Minimum value: 0
+# Maximum value: 100
+#reserved_percentage = 0
+
+# Prefix for iSCSI volumes (string value)
+# Deprecated group/name - [backend_defaults]/iscsi_target_prefix
+#target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSCSI daemon is listening on (string value)
+# Deprecated group/name - [backend_defaults]/iscsi_ip_address
+#target_ip_address = $my_ip
+
+# The list of secondary IP addresses of the iSCSI daemon (list value)
+#iscsi_secondary_ip_addresses =
+
+# The port that the iSCSI daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# Deprecated group/name - [backend_defaults]/iscsi_port
+#target_port = 3260
+
+# The maximum number of times to rescan targets to find volume (integer value)
+#num_volume_device_scan_tries = 3
+
+# The backend name for a given driver implementation (string value)
+#volume_backend_name = <None>
+
+# Do we attach/detach volumes in cinder using multipath for volume to image and
+# image to volume transfers? (boolean value)
+#use_multipath_for_image_xfer = false
+
+# If this is set to True, attachment of volumes for image transfer will be
+# aborted when multipathd is not running. Otherwise, it will fallback to single
+# path. (boolean value)
+#enforce_multipath_for_image_xfer = false
+
+# Method used to wipe old volumes (string value)
+# Possible values:
+# none - <No description provided>
+# zero - <No description provided>
+#volume_clear = zero
+
+# Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 => all
+# (integer value)
+# Maximum value: 1024
+#volume_clear_size = 0
+
+# The flag to pass to ionice to alter the i/o priority of the process used to
+# zero a volume after deletion, for example "-c3" for idle only priority.
+# (string value)
+#volume_clear_ionice = <None>
+
+# Target user-land tool to use. tgtadm is default, use lioadm for LIO iSCSI
+# support, scstadmin for SCST target support, ietadm for iSCSI Enterprise
+# Target, iscsictl for Chelsio iSCSI Target, nvmet for NVMEoF support, or fake
+# for testing. (string value)
+# Possible values:
+# tgtadm - <No description provided>
+# lioadm - <No description provided>
+# scstadmin - <No description provided>
+# iscsictl - <No description provided>
+# ietadm - <No description provided>
+# nvmet - <No description provided>
+# fake - <No description provided>
+# Deprecated group/name - [backend_defaults]/iscsi_helper
+#target_helper = tgtadm
+
+# Volume configuration file storage directory (string value)
+#volumes_dir = $state_path/volumes
+
+# IET configuration file (string value)
+#iet_conf = /etc/iet/ietd.conf
+
+# Chiscsi (CXT) global defaults configuration file (string value)
+#chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf
+
+# Sets the behavior of the iSCSI target to either perform blockio or fileio
+# optionally, auto can be set and Cinder will autodetect type of backing device
+# (string value)
+# Possible values:
+# blockio - <No description provided>
+# fileio - <No description provided>
+# auto - <No description provided>
+#iscsi_iotype = fileio
+
+# The default block size used when copying/clearing volumes (string value)
+#volume_dd_blocksize = 1M
+
+# The blkio cgroup name to be used to limit bandwidth of volume copy (string
+# value)
+#volume_copy_blkio_cgroup_name = cinder-volume-copy
+
+# The upper limit of bandwidth of volume copy. 0 => unlimited (integer value)
+#volume_copy_bps_limit = 0
+
+# Sets the behavior of the iSCSI target to either perform write-back(on) or
+# write-through(off). This parameter is valid if target_helper is set to
+# tgtadm. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+#iscsi_write_cache = on
+
+# Sets the target-specific flags for the iSCSI target. Only used for tgtadm to
+# specify backing device flags using bsoflags option. The specified string is
+# passed as is to the underlying tool. (string value)
+#iscsi_target_flags =
+
+# Determines the target protocol for new volumes, created with tgtadm, lioadm
+# and nvmet target helpers. In order to enable RDMA, this parameter should be
+# set with the value "iser". The supported iSCSI protocol values are "iscsi"
+# and "iser", in case of nvmet target set to "nvmet_rdma". (string value)
+# Possible values:
+# iscsi - <No description provided>
+# iser - <No description provided>
+# nvmet_rdma - <No description provided>
+# Deprecated group/name - [backend_defaults]/iscsi_protocol
+#target_protocol = iscsi
+
+# The path to the client certificate key for verification, if the driver
+# supports it. (string value)
+#driver_client_cert_key = <None>
+
+# The path to the client certificate for verification, if the driver supports
+# it. (string value)
+#driver_client_cert = <None>
+
+# Tell driver to use SSL for connection to backend storage if the driver
+# supports it. (boolean value)
+#driver_use_ssl = false
+
+# Representation of the over subscription ratio when thin provisioning is
+# enabled. Default ratio is 20.0, meaning provisioned capacity can be 20 times
+# of the total physical capacity. If the ratio is 10.5, it means provisioned
+# capacity can be 10.5 times of the total physical capacity. A ratio of 1.0
+# means provisioned capacity cannot exceed the total physical capacity. If
+# ratio is 'auto', Cinder will automatically calculate the ratio based on the
+# provisioned capacity and the used space. If not set to auto, the ratio has to
+# be a minimum of 1.0. (string value)
+#max_over_subscription_ratio = 20.0
+
+# Certain ISCSI targets have predefined target names, SCST target driver uses
+# this name. (string value)
+#scst_target_iqn_name = <None>
+
+# SCST target implementation can choose from multiple SCST target drivers.
+# (string value)
+#scst_target_driver = iscsi
+
+# Option to enable/disable CHAP authentication for targets. (boolean value)
+#use_chap_auth = false
+
+# CHAP user name. (string value)
+#chap_username =
+
+# Password for specified CHAP account name. (string value)
+#chap_password =
+
+# Namespace for driver private data values to be saved in. (string value)
+#driver_data_namespace = <None>
+
+# String representation for an equation that will be used to filter hosts. Only
+# used when the driver filter is set to be used by the Cinder scheduler.
+# (string value)
+#filter_function = <None>
+
+# String representation for an equation that will be used to determine the
+# goodness of a host. Only used when using the goodness weigher is set to be
+# used by the Cinder scheduler. (string value)
+#goodness_function = <None>
+
+# If set to True the http client will validate the SSL certificate of the
+# backend endpoint. (boolean value)
+#driver_ssl_cert_verify = false
+
+# Can be used to specify a non default path to a CA_BUNDLE file or directory
+# with certificates of trusted CAs, which will be used to validate the backend
+# (string value)
+#driver_ssl_cert_path = <None>
+
+# List of options that control which trace info is written to the DEBUG log
+# level to assist developers. Valid values are method and api. (list value)
+#trace_flags = <None>
+
+# Multi opt of dictionaries to represent a replication target device.  This
+# option may be specified multiple times in a single config section to specify
+# multiple replication target devices.  Each entry takes the standard dict
+# config form: replication_device =
+# target_device_id:<required>,key1:value1,key2:value2... (dict value)
+#replication_device = <None>
+
+# If set to True, upload-to-image in raw format will create a cloned volume and
+# register its location to the image service, instead of uploading the volume
+# content. The cinder backend and locations support must be enabled in the
+# image service. (boolean value)
+#image_upload_use_cinder_backend = false
+
+# If set to True, the image volume created by upload-to-image will be placed in
+# the internal tenant. Otherwise, the image volume is created in the current
+# context's tenant. (boolean value)
+#image_upload_use_internal_tenant = false
+
+# Enable the image volume cache for this backend. (boolean value)
+#image_volume_cache_enabled = false
+
+# Max size of the image volume cache for this backend in GB. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_size_gb = 0
+
+# Max number of entries allowed in the image volume cache. 0 => unlimited.
+# (integer value)
+#image_volume_cache_max_count = 0
+
+# Report to clients of Cinder that the backend supports discard (aka.
+# trim/unmap). This will not actually change the behavior of the backend or the
+# client directly, it will only notify that it can be used. (boolean value)
+#report_discard_supported = false
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#storage_protocol = iscsi
+
+# If this is set to True, a temporary snapshot will be created for performing
+# non-disruptive backups. Otherwise a temporary volume will be cloned in order
+# to perform a backup. (boolean value)
+#backup_use_temp_snapshot = false
+
+# Set this to True when you want to allow an unsupported driver to start.
+# Drivers that haven't maintained a working CI system and testing are marked as
+# unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+# Availability zone for this volume backend. If not set, the
+# storage_availability_zone option value is used as the default for all
+# backends. (string value)
+#backend_availability_zone = <None>
+
+# The maximum number of times to rescan iSER targetto find volume (integer
+# value)
+#num_iser_scan_tries = 3
+
+# Prefix for iSER volumes (string value)
+#iser_target_prefix = iqn.2010-10.org.openstack:
+
+# The IP address that the iSER daemon is listening on (string value)
+#iser_ip_address = $my_ip
+
+# The port that the iSER daemon is listening on (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#iser_port = 3260
+
+# The name of the iSER target user-land tool to use (string value)
+#iser_helper = tgtadm
+
+# The port that the NVMe target is listening on. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nvmet_port_id = 1
+
+# The namespace id associated with the subsystem that will be created with the
+# path for the LVM volume. (integer value)
+#nvmet_ns_id = 10
+
+# Hostname for the CoprHD Instance (string value)
+#coprhd_hostname = <None>
+
+# Port for the CoprHD Instance (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#coprhd_port = 4443
+
+# Username for accessing the CoprHD Instance (string value)
+#coprhd_username = <None>
+
+# Password for accessing the CoprHD Instance (string value)
+#coprhd_password = <None>
+
+# Tenant to utilize within the CoprHD Instance (string value)
+#coprhd_tenant = <None>
+
+# Project to utilize within the CoprHD Instance (string value)
+#coprhd_project = <None>
+
+# Virtual Array to utilize within the CoprHD Instance (string value)
+#coprhd_varray = <None>
+
+# True | False to indicate if the storage array in CoprHD is VMAX or VPLEX
+# (boolean value)
+#coprhd_emulate_snapshot = false
+
+# Rest Gateway IP or FQDN for Scaleio (string value)
+#coprhd_scaleio_rest_gateway_host = None
+
+# Rest Gateway Port for Scaleio (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#coprhd_scaleio_rest_gateway_port = 4984
+
+# Username for Rest Gateway (string value)
+#coprhd_scaleio_rest_server_username = <None>
+
+# Rest Gateway Password (string value)
+#coprhd_scaleio_rest_server_password = <None>
+
+# verify server certificate (boolean value)
+#scaleio_verify_server_certificate = false
+
+# Server certificate path (string value)
+#scaleio_server_certificate_path = <None>
+
+# Datera API port. (string value)
+#datera_api_port = 7717
+
+# DEPRECATED: Datera API version. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#datera_api_version = 2
+
+# Timeout for HTTP 503 retry messages (integer value)
+#datera_503_timeout = 120
+
+# Interval between 503 retries (integer value)
+#datera_503_interval = 5
+
+# True to set function arg and return logging (boolean value)
+#datera_debug = false
+
+# ONLY FOR DEBUG/TESTING PURPOSES
+# True to set replica_count to 1 (boolean value)
+#datera_debug_replica_count_override = false
+
+# If set to 'Map' --> OpenStack project ID will be mapped implicitly to Datera
+# tenant ID
+# If set to 'None' --> Datera tenant ID will not be used during volume
+# provisioning
+# If set to anything else --> Datera tenant ID will be the provided value
+# (string value)
+#datera_tenant_id = <None>
+
+# Set to True to disable profiling in the Datera driver (boolean value)
+#datera_disable_profiler = false
+
+# Group name to use for creating volumes. Defaults to "group-0". (string value)
+#eqlx_group_name = group-0
+
+# Maximum retry count for reconnection. Default is 5. (integer value)
+# Minimum value: 0
+#eqlx_cli_max_retries = 5
+
+# Pool in which volumes will be created. Defaults to "default". (string value)
+#eqlx_pool = default
+
+# Storage Center System Serial Number (integer value)
+#dell_sc_ssn = 64702
+
+# Dell API port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#dell_sc_api_port = 3033
+
+# Name of the server folder to use on the Storage Center (string value)
+#dell_sc_server_folder = openstack
+
+# Name of the volume folder to use on the Storage Center (string value)
+#dell_sc_volume_folder = openstack
+
+# Enable HTTPS SC certificate verification (boolean value)
+#dell_sc_verify_cert = false
+
+# IP address of secondary DSM controller (string value)
+#secondary_san_ip =
+
+# Secondary DSM user name (string value)
+#secondary_san_login = Admin
+
+# Secondary DSM user password name (string value)
+#secondary_san_password =
+
+# Secondary Dell API port (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#secondary_sc_api_port = 3033
+
+# Dell SC API async call default timeout in seconds. (integer value)
+#dell_api_async_rest_timeout = 15
+
+# Dell SC API sync call default timeout in seconds. (integer value)
+#dell_api_sync_rest_timeout = 30
+
+# Domain IP to be excluded from iSCSI returns. (IP address value)
+#excluded_domain_ip = <None>
+
+# Server OS type to use when creating a new server on the Storage Center.
+# (string value)
+#dell_server_os = Red Hat Linux 6.x
+
+# REST server port. (string value)
+#sio_rest_server_port = 443
+
+# Verify server certificate. (boolean value)
+#sio_verify_server_certificate = false
+
+# Server certificate path. (string value)
+#sio_server_certificate_path = <None>
+
+# Round up volume capacity. (boolean value)
+#sio_round_volume_capacity = true
+
+# Unmap volume before deletion. (boolean value)
+#sio_unmap_volume_before_deletion = false
+
+# Storage Pools. (string value)
+#sio_storage_pools = <None>
+
+# DEPRECATED: Protection Domain ID. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_protection_domain_id = <None>
+
+# DEPRECATED: Protection Domain name. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_protection_domain_name = <None>
+
+# DEPRECATED: Storage Pool name. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_storage_pool_name = <None>
+
+# DEPRECATED: Storage Pool ID. (string value)
+# This option is deprecated for removal since Pike.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by sio_storage_pools option
+#sio_storage_pool_id = <None>
+
+# ScaleIO API version. (string value)
+#sio_server_api_version = <None>
+
+# max_over_subscription_ratio setting for the ScaleIO driver. This replaces the
+# general max_over_subscription_ratio which has no effect in this
+# driver.Maximum value allowed for ScaleIO is 10.0. (floating point value)
+#sio_max_over_subscription_ratio = 10.0
+
+# Allow thick volumes to be created in Storage Pools when zero padding is
+# disabled. This option should not be enabled if multiple tenants will utilize
+# thick volumes from a shared Storage Pool. (boolean value)
+#sio_allow_non_padded_thick_volumes = false
+
+# A comma-separated list of storage pool names to be used. (list value)
+#unity_storage_pool_names = <None>
+
+# A comma-separated list of iSCSI or FC ports to be used. Each port can be
+# Unix-style glob expressions. (list value)
+#unity_io_ports = <None>
+
+# To remove the host from Unity when the last LUN is detached from it. By
+# default, it is False. (boolean value)
+#remove_empty_host = false
+
+# DEPRECATED: Use this file for cinder emc plugin config data. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#cinder_dell_emc_config_file = /etc/cinder/cinder_dell_emc_config.xml
+
+# Use this value to specify length of the interval in seconds. (integer value)
+#interval = 3
+
+# Use this value to specify number of retries. (integer value)
+#retries = 200
+
+# Use this value to enable the initiator_check. (boolean value)
+#initiator_check = false
+
+# REST server port number. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_rest_port = 8443
+
+# Serial number of the array to connect to. (string value)
+#vmax_array = <None>
+
+# Storage resource pool on array to use for provisioning. (string value)
+#vmax_srp = <None>
+
+# Service level to use for provisioning storage. (string value)
+#vmax_service_level = <None>
+
+# Workload (string value)
+#vmax_workload = <None>
+
+# List of port groups containing frontend ports configured prior for server
+# connection. (list value)
+#vmax_port_groups = <None>
+
+# VNX authentication scope type. By default, the value is global. (string
+# value)
+#storage_vnx_authentication_type = global
+
+# Directory path that contains the VNX security file. Make sure the security
+# file is generated first. (string value)
+#storage_vnx_security_file_dir = <None>
+
+# Naviseccli Path. (string value)
+#naviseccli_path = <None>
+
+# Comma-separated list of storage pool names to be used. (list value)
+#storage_vnx_pool_names = <None>
+
+# Default timeout for CLI operations in minutes. For example, LUN migration is
+# a typical long running operation, which depends on the LUN size and the load
+# of the array. An upper bound in the specific deployment can be set to avoid
+# unnecessary long wait. By default, it is 365 days long. (integer value)
+#default_timeout = 31536000
+
+# Default max number of LUNs in a storage group. By default, the value is 255.
+# (integer value)
+#max_luns_per_storage_group = 255
+
+# To destroy storage group when the last LUN is removed from it. By default,
+# the value is False. (boolean value)
+#destroy_empty_storage_group = false
+
+# Mapping between hostname and its iSCSI initiator IP addresses. (string value)
+#iscsi_initiators = <None>
+
+# Comma separated iSCSI or FC ports to be used in Nova or Cinder. (list value)
+#io_port_list = <None>
+
+# Automatically register initiators. By default, the value is False. (boolean
+# value)
+#initiator_auto_registration = false
+
+# Automatically deregister initiators after the related storage group is
+# destroyed. By default, the value is False. (boolean value)
+#initiator_auto_deregistration = false
+
+# DEPRECATED: Report free_capacity_gb as 0 when the limit to maximum number of
+# pool LUNs is reached. By default, the value is False. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#check_max_pool_luns_threshold = false
+
+# Delete a LUN even if it is in Storage Groups. By default, the value is False.
+# (boolean value)
+#force_delete_lun_in_storagegroup = false
+
+# Force LUN creation even if the full threshold of pool is reached. By default,
+# the value is False. (boolean value)
+#ignore_pool_full_threshold = false
+
+# XMS cluster id in multi-cluster environment (string value)
+#xtremio_cluster_name =
+
+# Number of retries in case array is busy (integer value)
+#xtremio_array_busy_retry_count = 5
+
+# Interval between retries in case array is busy (integer value)
+#xtremio_array_busy_retry_interval = 5
+
+# Number of volumes created from each cached glance image (integer value)
+#xtremio_volumes_per_glance_cache = 100
+
+# Should the driver remove initiator groups with no volumes after the last
+# connection was terminated. Since the behavior till now was to leave the IG
+# be, we default to False (not deleting IGs without connected volumes); setting
+# this parameter to True will remove any IG after terminating its connection to
+# the last volume. (boolean value)
+#xtremio_clean_unused_ig = false
+
+# The IP of DMS client socket server (IP address value)
+#disco_client = 127.0.0.1
+
+# The port to connect DMS client socket server (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#disco_client_port = 9898
+
+# DEPRECATED: Path to the wsdl file to communicate with DISCO request manager
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#disco_wsdl_path = /etc/cinder/DISCOService.wsdl
+
+# DEPRECATED: The IP address of the REST server (IP address value)
+# Deprecated group/name - [DEFAULT]/rest_ip
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Using san_ip later
+#disco_rest_ip = <None>
+
+# Use soap client or rest client for communicating with DISCO. Possible values
+# are "soap" or "rest". (string value)
+# Possible values:
+# soap - <No description provided>
+# rest - <No description provided>
+# Deprecated group/name - [DEFAULT]/choice_client
+#disco_choice_client = <None>
+
+# DEPRECATED: The port of DISCO source API (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Using san_api_port later
+#disco_src_api_port = 8080
+
+# Prefix before volume name to differentiate DISCO volume created through
+# openstack and the other ones (string value)
+# Deprecated group/name - [backend_defaults]/volume_name_prefix
+#disco_volume_name_prefix = openstack-
+
+# How long we check whether a snapshot is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/snapshot_check_timeout
+#disco_snapshot_check_timeout = 3600
+
+# How long we check whether a restore is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/restore_check_timeout
+#disco_restore_check_timeout = 3600
+
+# How long we check whether a clone is finished before we give up (integer
+# value)
+# Deprecated group/name - [backend_defaults]/clone_check_timeout
+#disco_clone_check_timeout = 3600
+
+# How long we wait before retrying to get an item detail (integer value)
+# Deprecated group/name - [backend_defaults]/retry_interval
+#disco_retry_interval = 1
+
+# Number of nodes that should replicate the data. (integer value)
+#drbdmanage_redundancy = 1
+
+# Resource deployment completion wait policy. (string value)
+#drbdmanage_resource_policy = {"ratio": "0.51", "timeout": "60"}
+
+# Disk options to set on new resources. See http://www.drbd.org/en/doc/users-
+# guide-90/re-drbdconf for all the details. (string value)
+#drbdmanage_disk_options = {"c-min-rate": "4M"}
+
+# Net options to set on new resources. See http://www.drbd.org/en/doc/users-
+# guide-90/re-drbdconf for all the details. (string value)
+#drbdmanage_net_options = {"connect-int": "4", "allow-two-primaries": "yes", "ko-count": "30", "max-buffers": "20000", "ping-timeout": "100"}
+
+# Resource options to set on new resources. See
+# http://www.drbd.org/en/doc/users-guide-90/re-drbdconf for all the details.
+# (string value)
+#drbdmanage_resource_options = {"auto-promote-timeout": "300"}
+
+# Snapshot completion wait policy. (string value)
+#drbdmanage_snapshot_policy = {"count": "1", "timeout": "60"}
+
+# Volume resize completion wait policy. (string value)
+#drbdmanage_resize_policy = {"timeout": "60"}
+
+# Resource deployment completion wait plugin. (string value)
+#drbdmanage_resource_plugin = drbdmanage.plugins.plugins.wait_for.WaitForResource
+
+# Snapshot completion wait plugin. (string value)
+#drbdmanage_snapshot_plugin = drbdmanage.plugins.plugins.wait_for.WaitForSnapshot
+
+# Volume resize completion wait plugin. (string value)
+#drbdmanage_resize_plugin = drbdmanage.plugins.plugins.wait_for.WaitForVolumeSize
+
+# If set, the c-vol node will receive a useable
+#                 /dev/drbdX device, even if the actual data is stored on
+#                 other nodes only.
+#                 This is useful for debugging, maintenance, and to be
+#                 able to do the iSCSI export from the c-vol node. (boolean
+# value)
+#drbdmanage_devs_on_controller = true
+
+# config file for cinder eternus_dx volume driver (string value)
+#cinder_eternus_config_file = /etc/cinder/cinder_fujitsu_eternus_dx.xml
+
+# The flag of thin storage allocation. (boolean value)
+#dsware_isthin = false
+
+# Fusionstorage manager ip addr for cinder-volume. (string value)
+#dsware_manager =
+
+# Fusionstorage agent ip addr range. (string value)
+#fusionstorageagent =
+
+# Pool type, like sata-2copy. (string value)
+#pool_type = default
+
+# Pool id permit to use. (list value)
+#pool_id_filter =
+
+# Create clone volume timeout. (integer value)
+#clone_volume_timeout = 680
+
+# Space network name to use for data transfer (string value)
+#hgst_net = Net 1 (IPv4)
+
+# Comma separated list of Space storage servers:devices. ex:
+# os1_stor:gbd0,os2_stor:gbd0 (string value)
+#hgst_storage_servers = os:gbd0
+
+# Should spaces be redundantly stored (1/0) (string value)
+#hgst_redundancy = 0
+
+# User to own created spaces (string value)
+#hgst_space_user = root
+
+# Group to own created spaces (string value)
+#hgst_space_group = disk
+
+# UNIX mode for created spaces (string value)
+#hgst_space_mode = 0600
+
+# 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 (string value)
+#hpe3par_api_url =
+
+# 3PAR username with the 'edit' role (string value)
+#hpe3par_username =
+
+# 3PAR password for the user specified in hpe3par_username (string value)
+#hpe3par_password =
+
+# List of the CPG(s) to use for volume creation (list value)
+#hpe3par_cpg = OpenStack
+
+# The CPG to use for Snapshots for volumes. If empty the userCPG will be used.
+# (string value)
+#hpe3par_cpg_snap =
+
+# The time in hours to retain a snapshot.  You can't delete it before this
+# expires. (string value)
+#hpe3par_snapshot_retention =
+
+# The time in hours when a snapshot expires  and is deleted.  This must be
+# larger than expiration (string value)
+#hpe3par_snapshot_expiration =
+
+# Enable HTTP debugging to 3PAR (boolean value)
+#hpe3par_debug = false
+
+# List of target iSCSI addresses to use. (list value)
+#hpe3par_iscsi_ips =
+
+# Enable CHAP authentication for iSCSI connections. (boolean value)
+#hpe3par_iscsi_chap_enabled = false
+
+# HPE LeftHand WSAPI Server Url like https://<LeftHand ip>:8081/lhos (uri
+# value)
+# Deprecated group/name - [backend_defaults]/hplefthand_api_url
+#hpelefthand_api_url = <None>
+
+# HPE LeftHand Super user username (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_username
+#hpelefthand_username = <None>
+
+# HPE LeftHand Super user password (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_password
+#hpelefthand_password = <None>
+
+# HPE LeftHand cluster name (string value)
+# Deprecated group/name - [backend_defaults]/hplefthand_clustername
+#hpelefthand_clustername = <None>
+
+# Configure CHAP authentication for iSCSI connections (Default: Disabled)
+# (boolean value)
+# Deprecated group/name - [backend_defaults]/hplefthand_iscsi_chap_enabled
+#hpelefthand_iscsi_chap_enabled = false
+
+# Enable HTTP debugging to LeftHand (boolean value)
+# Deprecated group/name - [backend_defaults]/hplefthand_debug
+#hpelefthand_debug = false
+
+# Port number of SSH service. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#hpelefthand_ssh_port = 16022
+
+# The configuration file for the Cinder Huawei driver. (string value)
+#cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf.xml
+
+# The remote device hypermetro will use. (string value)
+#hypermetro_devices = <None>
+
+# The remote metro device san user. (string value)
+#metro_san_user = <None>
+
+# The remote metro device san password. (string value)
+#metro_san_password = <None>
+
+# The remote metro device domain name. (string value)
+#metro_domain_name = <None>
+
+# The remote metro device request url. (string value)
+#metro_san_address = <None>
+
+# The remote metro device pool names. (string value)
+#metro_storage_pools = <None>
+
+# Connection protocol should be FC. (Default is FC.) (string value)
+#flashsystem_connection_protocol = FC
+
+# Allows vdisk to multi host mapping. (Default is True) (boolean value)
+#flashsystem_multihostmap_enabled = true
+
+# DEPRECATED: This option no longer has any affect. It is deprecated and will
+# be removed in the next release. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#flashsystem_multipath_enabled = false
+
+# Default iSCSI Port ID of FlashSystem. (Default port is 0.) (integer value)
+#flashsystem_iscsi_portid = 0
+
+# Specifies the path of the GPFS directory where Block Storage volume and
+# snapshot files are stored. (string value)
+#gpfs_mount_point_base = <None>
+
+# Specifies the path of the Image service repository in GPFS.  Leave undefined
+# if not storing images in GPFS. (string value)
+#gpfs_images_dir = <None>
+
+# Specifies the type of image copy to be used.  Set this when the Image service
+# repository also uses GPFS so that image files can be transferred efficiently
+# from the Image service to the Block Storage service. There are two valid
+# values: "copy" specifies that a full copy of the image is made;
+# "copy_on_write" specifies that copy-on-write optimization strategy is used
+# and unmodified blocks of the image file are shared efficiently. (string
+# value)
+# Possible values:
+# copy - <No description provided>
+# copy_on_write - <No description provided>
+# <None> - <No description provided>
+#gpfs_images_share_mode = <None>
+
+# Specifies an upper limit on the number of indirections required to reach a
+# specific block due to snapshots or clones.  A lengthy chain of copy-on-write
+# snapshots or clones can have a negative impact on performance, but improves
+# space utilization.  0 indicates unlimited clone depth. (integer value)
+#gpfs_max_clone_depth = 0
+
+# Specifies that volumes are created as sparse files which initially consume no
+# space. If set to False, the volume is created as a fully allocated file, in
+# which case, creation may take a significantly longer time. (boolean value)
+#gpfs_sparse_volumes = true
+
+# Specifies the storage pool that volumes are assigned to. By default, the
+# system storage pool is used. (string value)
+#gpfs_storage_pool = system
+
+# Comma-separated list of IP address or hostnames of GPFS nodes. (list value)
+#gpfs_hosts =
+
+# Username for GPFS nodes. (string value)
+#gpfs_user_login = root
+
+# Password for GPFS node user. (string value)
+#gpfs_user_password =
+
+# Filename of private key to use for SSH authentication. (string value)
+#gpfs_private_key =
+
+# SSH port to use. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#gpfs_ssh_port = 22
+
+# File containing SSH host keys for the gpfs nodes with which driver needs to
+# communicate. Default=$state_path/ssh_known_hosts (string value)
+#gpfs_hosts_key_file = $state_path/ssh_known_hosts
+
+# Option to enable strict gpfs host key checking while connecting to gpfs
+# nodes. Default=False (boolean value)
+#gpfs_strict_host_key_policy = false
+
+# Mapping between IODevice address and unit address. (string value)
+#ds8k_devadd_unitadd_mapping =
+
+# Set the first two digits of SSID. (string value)
+#ds8k_ssid_prefix = FF
+
+# Reserve LSSs for consistency group. (string value)
+#lss_range_for_cg =
+
+# Set to zLinux if your OpenStack version is prior to Liberty and you're
+# connecting to zLinux systems. Otherwise set to auto. Valid values for this
+# parameter are: 'auto', 'AMDLinuxRHEL', 'AMDLinuxSuse', 'AppleOSX', 'Fujitsu',
+# 'Hp', 'HpTru64', 'HpVms', 'LinuxDT', 'LinuxRF', 'LinuxRHEL', 'LinuxSuse',
+# 'Novell', 'SGI', 'SVC', 'SanFsAIX', 'SanFsLinux', 'Sun', 'VMWare', 'Win2000',
+# 'Win2003', 'Win2008', 'Win2012', 'iLinux', 'nSeries', 'pLinux', 'pSeries',
+# 'pSeriesPowerswap', 'zLinux', 'iSeries'. (string value)
+#ds8k_host_type = auto
+
+# Proxy driver that connects to the IBM Storage Array (string value)
+#proxy = cinder.volume.drivers.ibm.ibm_storage.proxy.IBMStorageProxy
+
+# Connection type to the IBM Storage Array (string value)
+# Possible values:
+# fibre_channel - <No description provided>
+# iscsi - <No description provided>
+#connection_type = iscsi
+
+# CHAP authentication mode, effective only for iscsi (disabled|enabled) (string
+# value)
+# Possible values:
+# disabled - <No description provided>
+# enabled - <No description provided>
+#chap = disabled
+
+# List of Management IP addresses (separated by commas) (string value)
+#management_ips =
+
+# Comma separated list of storage system storage pools for volumes. (list
+# value)
+#storwize_svc_volpool_name = volpool
+
+# Storage system space-efficiency parameter for volumes (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#storwize_svc_vol_rsize = 2
+
+# Storage system threshold for volume capacity warnings (percentage) (integer
+# value)
+# Minimum value: -1
+# Maximum value: 100
+#storwize_svc_vol_warning = 0
+
+# Storage system autoexpand parameter for volumes (True/False) (boolean value)
+#storwize_svc_vol_autoexpand = true
+
+# Storage system grain size parameter for volumes (32/64/128/256) (integer
+# value)
+#storwize_svc_vol_grainsize = 256
+
+# Storage system compression option for volumes (boolean value)
+#storwize_svc_vol_compression = false
+
+# Enable Easy Tier for volumes (boolean value)
+#storwize_svc_vol_easytier = true
+
+# The I/O group in which to allocate volumes. It can be a comma-separated list
+# in which case the driver will select an io_group based on least number of
+# volumes associated with the io_group. (string value)
+#storwize_svc_vol_iogrp = 0
+
+# Maximum number of seconds to wait for FlashCopy to be prepared. (integer
+# value)
+# Minimum value: 1
+# Maximum value: 600
+#storwize_svc_flashcopy_timeout = 120
+
+# DEPRECATED: This option no longer has any affect. It is deprecated and will
+# be removed in the next release. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#storwize_svc_multihostmap_enabled = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#storwize_svc_allow_tenant_qos = false
+
+# If operating in stretched cluster mode, specify the name of the pool in which
+# mirrored copies are stored.Example: "pool2" (string value)
+#storwize_svc_stretched_cluster_partner = <None>
+
+# Specifies secondary management IP or hostname to be used if san_ip is invalid
+# or becomes inaccessible. (string value)
+#storwize_san_secondary_ip = <None>
+
+# Specifies that the volume not be formatted during creation. (boolean value)
+#storwize_svc_vol_nofmtdisk = false
+
+# Specifies the Storwize FlashCopy copy rate to be used when creating a full
+# volume copy. The default is rate is 50, and the valid rates are 1-150.
+# (integer value)
+# Minimum value: 1
+# Maximum value: 150
+#storwize_svc_flashcopy_rate = 50
+
+# Specifies the name of the pool in which mirrored copy is stored. Example:
+# "pool2" (string value)
+#storwize_svc_mirror_pool = <None>
+
+# Specifies the name of the peer pool for hyperswap volume, the peer pool must
+# exist on the other site. (string value)
+#storwize_peer_pool = <None>
+
+# Specifies the site information for host. One WWPN or multi WWPNs used in the
+# host can be specified. For example:
+# storwize_preferred_host_site=site1:wwpn1,site2:wwpn2&wwpn3 or
+# storwize_preferred_host_site=site1:iqn1,site2:iqn2 (dict value)
+#storwize_preferred_host_site =
+
+# This defines an optional cycle period that applies to Global Mirror
+# relationships with a cycling mode of multi. A Global Mirror relationship
+# using the multi cycling_mode performs a complete cycle at most once each
+# period. The default is 300 seconds, and the valid seconds are 60-86400.
+# (integer value)
+# Minimum value: 60
+# Maximum value: 86400
+#cycle_period_seconds = 300
+
+# Connect with multipath (FC only; iSCSI multipath is controlled by Nova)
+# (boolean value)
+#storwize_svc_multipath_enabled = false
+
+# Configure CHAP authentication for iSCSI connections (Default: Enabled)
+# (boolean value)
+#storwize_svc_iscsi_chap_enabled = true
+
+# Name of the pool from which volumes are allocated (string value)
+#infinidat_pool_name = <None>
+
+# Protocol for transferring data between host and storage back-end. (string
+# value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+#infinidat_storage_protocol = fc
+
+# List of names of network spaces to use for iSCSI connectivity (list value)
+#infinidat_iscsi_netspaces =
+
+# Specifies whether to turn on compression for newly created volumes. (boolean
+# value)
+#infinidat_use_compression = false
+
+# K2 driver will calculate max_oversubscription_ratio on setting this option as
+# True. (boolean value)
+#auto_calc_max_oversubscription_ratio = false
+
+# Whether or not our private network has unique FQDN on each initiator or not.
+# For example networks with QA systems usually have multiple servers/VMs with
+# the same FQDN.  When true this will create host entries on K2 using the FQDN,
+# when false it will use the reversed IQN/WWNN. (boolean value)
+#unique_fqdn_network = true
+
+# Disabling iSCSI discovery (sendtargets) for multipath connections on K2
+# driver. (boolean value)
+#disable_discovery = false
+
+# Pool or Vdisk name to use for volume creation. (string value)
+#lenovo_backend_name = A
+
+# linear (for VDisk) or virtual (for Pool). (string value)
+# Possible values:
+# linear - <No description provided>
+# virtual - <No description provided>
+#lenovo_backend_type = virtual
+
+# Lenovo api interface protocol. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#lenovo_api_protocol = https
+
+# Whether to verify Lenovo array SSL certificate. (boolean value)
+#lenovo_verify_certificate = false
+
+# Lenovo array SSL certificate path. (string value)
+#lenovo_verify_certificate_path = <None>
+
+# List of comma-separated target iSCSI IP addresses. (list value)
+#lenovo_iscsi_ips =
+
+# Name for the VG that will contain exported volumes (string value)
+#volume_group = cinder-volumes
+
+# If >0, create LVs with multiple mirrors. Note that this requires lvm_mirrors
+# + 2 PVs with available space (integer value)
+#lvm_mirrors = 0
+
+# Type of LVM volumes to deploy; (default, thin, or auto). Auto defaults to
+# thin if thin is supported. (string value)
+# Possible values:
+# default - <No description provided>
+# thin - <No description provided>
+# auto - <No description provided>
+#lvm_type = auto
+
+# LVM conf file to use for the LVM driver in Cinder; this setting is ignored if
+# the specified file does not exist (You can also specify 'None' to not use a
+# conf file even if one exists). (string value)
+#lvm_conf_file = /etc/cinder/lvm.conf
+
+# Suppress leaked file descriptor warnings in LVM commands. (boolean value)
+#lvm_suppress_fd_warnings = false
+
+# The storage family type used on the storage system; valid values are
+# ontap_cluster for using clustered Data ONTAP, or eseries for using E-Series.
+# (string value)
+# Possible values:
+# ontap_cluster - <No description provided>
+# eseries - <No description provided>
+#netapp_storage_family = ontap_cluster
+
+# The storage protocol to be used on the data path with the storage system.
+# (string value)
+# Possible values:
+# iscsi - <No description provided>
+# fc - <No description provided>
+# nfs - <No description provided>
+#netapp_storage_protocol = <None>
+
+# The hostname (or IP address) for the storage system or proxy server. (string
+# value)
+#netapp_server_hostname = <None>
+
+# The TCP port to use for communication with the storage system or proxy
+# server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for
+# HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. (integer value)
+#netapp_server_port = <None>
+
+# The transport protocol used when communicating with the storage system or
+# proxy server. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#netapp_transport_type = http
+
+# Administrative user account name used to access the storage system or proxy
+# server. (string value)
+#netapp_login = <None>
+
+# Password for the administrative user account specified in the netapp_login
+# option. (string value)
+#netapp_password = <None>
+
+# This option specifies the virtual storage server (Vserver) name on the
+# storage cluster on which provisioning of block storage volumes should occur.
+# (string value)
+#netapp_vserver = <None>
+
+# The quantity to be multiplied by the requested volume size to ensure enough
+# space is available on the virtual storage server (Vserver) to fulfill the
+# volume creation request.  Note: this option is deprecated and will be removed
+# in favor of "reserved_percentage" in the Mitaka release. (floating point
+# value)
+#netapp_size_multiplier = 1.2
+
+# This option determines if storage space is reserved for LUN allocation. If
+# enabled, LUNs are thick provisioned. If space reservation is disabled,
+# storage space is allocated on demand. (string value)
+# Possible values:
+# enabled - <No description provided>
+# disabled - <No description provided>
+#netapp_lun_space_reservation = enabled
+
+# If the percentage of available space for an NFS share has dropped below the
+# value specified by this option, the NFS image cache will be cleaned. (integer
+# value)
+#thres_avl_size_perc_start = 20
+
+# When the percentage of available space on an NFS share has reached the
+# percentage specified by this option, the driver will stop clearing files from
+# the NFS image cache that have not been accessed in the last M minutes, where
+# M is the value of the expiry_thres_minutes configuration option. (integer
+# value)
+#thres_avl_size_perc_stop = 60
+
+# This option specifies the threshold for last access time for images in the
+# NFS image cache. When a cache cleaning cycle begins, images in the cache that
+# have not been accessed in the last M minutes, where M is the value of this
+# parameter, will be deleted from the cache to create free space on the NFS
+# share. (integer value)
+#expiry_thres_minutes = 720
+
+# This option is used to specify the path to the E-Series proxy application on
+# a proxy server. The value is combined with the value of the
+# netapp_transport_type, netapp_server_hostname, and netapp_server_port options
+# to create the URL used by the driver to connect to the proxy application.
+# (string value)
+#netapp_webservice_path = /devmgr/v2
+
+# This option is only utilized when the storage family is configured to
+# eseries. This option is used to restrict provisioning to the specified
+# controllers. Specify the value of this option to be a comma separated list of
+# controller hostnames or IP addresses to be used for provisioning. (string
+# value)
+#netapp_controller_ips = <None>
+
+# Password for the NetApp E-Series storage array. (string value)
+#netapp_sa_password = <None>
+
+# This option specifies whether the driver should allow operations that require
+# multiple attachments to a volume. An example would be live migration of
+# servers that have volumes attached. When enabled, this backend is limited to
+# 256 total volumes in order to guarantee volumes can be accessed by more than
+# one host. (boolean value)
+#netapp_enable_multiattach = false
+
+# This option specifies the path of the NetApp copy offload tool binary. Ensure
+# that the binary has execute permissions set which allow the effective user of
+# the cinder-volume process to execute the file. (string value)
+#netapp_copyoffload_tool_path = <None>
+
+# This option defines the type of operating system that will access a LUN
+# exported from Data ONTAP; it is assigned to the LUN at the time it is
+# created. (string value)
+#netapp_lun_ostype = <None>
+
+# This option defines the type of operating system for all initiators that can
+# access a LUN. This information is used when mapping LUNs to individual hosts
+# or groups of hosts. (string value)
+#netapp_host_type = <None>
+
+# This option is used to restrict provisioning to the specified pools. Specify
+# the value of this option to be a regular expression which will be applied to
+# the names of objects from the storage backend which represent pools in
+# Cinder. This option is only utilized when the storage protocol is configured
+# to use iSCSI or FC. (string value)
+# Deprecated group/name - [backend_defaults]/netapp_volume_list
+# Deprecated group/name - [backend_defaults]/netapp_storage_pools
+#netapp_pool_name_search_pattern = (.+)
+
+# Multi opt of dictionaries to represent the aggregate mapping between source
+# and destination back ends when using whole back end replication. For every
+# source aggregate associated with a cinder pool (NetApp FlexVol), you would
+# need to specify the destination aggregate on the replication target device. A
+# replication target device is configured with the configuration option
+# replication_device. Specify this option as many times as you have replication
+# devices. Each entry takes the standard dict config form:
+# netapp_replication_aggregate_map =
+# backend_id:<name_of_replication_device_section>,src_aggr_name1:dest_aggr_name1,src_aggr_name2:dest_aggr_name2,...
+# (dict value)
+#netapp_replication_aggregate_map = <None>
+
+# The maximum time in seconds to wait for existing SnapMirror transfers to
+# complete before aborting during a failover. (integer value)
+# Minimum value: 0
+#netapp_snapmirror_quiesce_timeout = 3600
+
+# IP address of Nexenta SA (string value)
+#nexenta_host =
+
+# HTTP(S) port to connect to Nexenta REST API server. If it is equal zero, 8443
+# for HTTPS and 8080 for HTTP is used (integer value)
+#nexenta_rest_port = 0
+
+# Use http or https for REST connection (default auto) (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+# auto - <No description provided>
+#nexenta_rest_protocol = auto
+
+# Use secure HTTP for REST connection (default True) (boolean value)
+#nexenta_use_https = true
+
+# User name to connect to Nexenta SA (string value)
+#nexenta_user = admin
+
+# Password to connect to Nexenta SA (string value)
+#nexenta_password = nexenta
+
+# Nexenta target portal port (integer value)
+#nexenta_iscsi_target_portal_port = 3260
+
+# SA Pool that holds all volumes (string value)
+#nexenta_volume = cinder
+
+# IQN prefix for iSCSI targets (string value)
+#nexenta_target_prefix = iqn.1986-03.com.sun:02:cinder-
+
+# Prefix for iSCSI target groups on SA (string value)
+#nexenta_target_group_prefix = cinder/
+
+# Volume group for ns5 (string value)
+#nexenta_volume_group = iscsi
+
+# Compression value for new ZFS folders. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+# gzip - <No description provided>
+# gzip-1 - <No description provided>
+# gzip-2 - <No description provided>
+# gzip-3 - <No description provided>
+# gzip-4 - <No description provided>
+# gzip-5 - <No description provided>
+# gzip-6 - <No description provided>
+# gzip-7 - <No description provided>
+# gzip-8 - <No description provided>
+# gzip-9 - <No description provided>
+# lzjb - <No description provided>
+# zle - <No description provided>
+# lz4 - <No description provided>
+#nexenta_dataset_compression = on
+
+# Deduplication value for new ZFS folders. (string value)
+# Possible values:
+# on - <No description provided>
+# off - <No description provided>
+# sha256 - <No description provided>
+# verify - <No description provided>
+# sha256, verify - <No description provided>
+#nexenta_dataset_dedup = off
+
+# Human-readable description for the folder. (string value)
+#nexenta_dataset_description =
+
+# Block size for datasets (integer value)
+#nexenta_blocksize = 4096
+
+# Block size for datasets (integer value)
+#nexenta_ns5_blocksize = 32
+
+# Enables or disables the creation of sparse datasets (boolean value)
+#nexenta_sparse = false
+
+# File with the list of available nfs shares (string value)
+#nexenta_shares_config = /etc/cinder/nfs_shares
+
+# Base directory that contains NFS share mount points (string value)
+#nexenta_mount_point_base = $state_path/mnt
+
+# Enables or disables the creation of volumes as sparsed files that take no
+# space. If disabled (False), volume is created as a regular file, which takes
+# a long time. (boolean value)
+#nexenta_sparsed_volumes = true
+
+# If set True cache NexentaStor appliance volroot option value. (boolean value)
+#nexenta_nms_cache_volroot = true
+
+# Enable stream compression, level 1..9. 1 - gives best speed; 9 - gives best
+# compression. (integer value)
+#nexenta_rrmgr_compression = 0
+
+# TCP Buffer size in KiloBytes. (integer value)
+#nexenta_rrmgr_tcp_buf_size = 4096
+
+# Number of TCP connections. (integer value)
+#nexenta_rrmgr_connections = 2
+
+# NexentaEdge logical path of directory to store symbolic links to NBDs (string
+# value)
+#nexenta_nbd_symlinks_dir = /dev/disk/by-path
+
+# IP address of NexentaEdge management REST API endpoint (string value)
+#nexenta_rest_address =
+
+# User name to connect to NexentaEdge (string value)
+#nexenta_rest_user = admin
+
+# Password to connect to NexentaEdge (string value)
+#nexenta_rest_password = nexenta
+
+# NexentaEdge logical path of bucket for LUNs (string value)
+#nexenta_lun_container =
+
+# NexentaEdge iSCSI service name (string value)
+#nexenta_iscsi_service =
+
+# NexentaEdge iSCSI Gateway client address for non-VIP service (string value)
+#nexenta_client_address =
+
+# NexentaEdge iSCSI LUN object chunk size (integer value)
+#nexenta_chunksize = 32768
+
+# File with the list of available NFS shares. (string value)
+#nfs_shares_config = /etc/cinder/nfs_shares
+
+# Create volumes as sparsed files which take no space. If set to False volume
+# is created as regular file. In such case volume creation takes a lot of time.
+# (boolean value)
+#nfs_sparsed_volumes = true
+
+# Create volumes as QCOW2 files rather than raw files. (boolean value)
+#nfs_qcow2_volumes = false
+
+# Base dir containing mount points for NFS shares. (string value)
+#nfs_mount_point_base = $state_path/mnt
+
+# Mount options passed to the NFS client. See section of the NFS man page for
+# details. (string value)
+#nfs_mount_options = <None>
+
+# The number of attempts to mount NFS shares before raising an error.  At least
+# one attempt will be made to mount an NFS share, regardless of the value
+# specified. (integer value)
+#nfs_mount_attempts = 3
+
+# Enable support for snapshots on the NFS driver. Platforms using libvirt
+# <1.2.7 will encounter issues with this feature. (boolean value)
+#nfs_snapshot_support = false
+
+# Nimble Controller pool name (string value)
+#nimble_pool_name = default
+
+# Nimble Subnet Label (string value)
+#nimble_subnet_label = *
+
+# Whether to verify Nimble SSL Certificate (boolean value)
+#nimble_verify_certificate = false
+
+# Path to Nimble Array SSL certificate (string value)
+#nimble_verify_cert_path = <None>
+
+# DPL pool uuid in which DPL volumes are stored. (string value)
+#dpl_pool =
+
+# DPL port number. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#dpl_port = 8357
+
+# REST API authorization token. (string value)
+#pure_api_token = <None>
+
+# Automatically determine an oversubscription ratio based on the current total
+# data reduction values. If used this calculated value will override the
+# max_over_subscription_ratio config option. (boolean value)
+#pure_automatic_max_oversubscription_ratio = true
+
+# Snapshot replication interval in seconds. (integer value)
+#pure_replica_interval_default = 3600
+
+# Retain all snapshots on target for this time (in seconds.) (integer value)
+#pure_replica_retention_short_term_default = 14400
+
+# Retain how many snapshots for each day. (integer value)
+#pure_replica_retention_long_term_per_day_default = 3
+
+# Retain snapshots per day on target for this time (in days.) (integer value)
+#pure_replica_retention_long_term_default = 7
+
+# When enabled, all Pure volumes, snapshots, and protection groups will be
+# eradicated at the time of deletion in Cinder. Data will NOT be recoverable
+# after a delete with this set to True! When disabled, volumes and snapshots
+# will go into pending eradication state and can be recovered. (boolean value)
+#pure_eradicate_on_delete = false
+
+# The URL to management QNAP Storage. Driver does not support IPv6 address in
+# URL. (uri value)
+#qnap_management_url = <None>
+
+# The pool name in the QNAP Storage (string value)
+#qnap_poolname = <None>
+
+# Communication protocol to access QNAP storage (string value)
+#qnap_storage_protocol = iscsi
+
+# Quobyte URL to the Quobyte volume using e.g. a DNS SRV record (preferred) or
+# a host list (alternatively) like quobyte://<DIR host1>, <DIR host2>/<volume
+# name> (string value)
+#quobyte_volume_url = <None>
+
+# Path to a Quobyte Client configuration file. (string value)
+#quobyte_client_cfg = <None>
+
+# Create volumes as sparse files which take no space. If set to False, volume
+# is created as regular file. (boolean value)
+#quobyte_sparsed_volumes = true
+
+# Create volumes as QCOW2 files rather than raw files. (boolean value)
+#quobyte_qcow2_volumes = true
+
+# Base dir containing the mount point for the Quobyte volume. (string value)
+#quobyte_mount_point_base = $state_path/mnt
+
+# Create a cache of volumes from merged snapshots to speed up creation of
+# multiple volumes from a single snapshot. (boolean value)
+#quobyte_volume_from_snapshot_cache = false
+
+# The name of ceph cluster (string value)
+#rbd_cluster_name = ceph
+
+# The RADOS pool where rbd volumes are stored (string value)
+#rbd_pool = rbd
+
+# The RADOS client name for accessing rbd volumes - only set when using cephx
+# authentication (string value)
+#rbd_user = <None>
+
+# Path to the ceph configuration file (string value)
+#rbd_ceph_conf =
+
+# Path to the ceph keyring file (string value)
+#rbd_keyring_conf =
+
+# Flatten volumes created from snapshots to remove dependency from volume to
+# snapshot (boolean value)
+#rbd_flatten_volume_from_snapshot = false
+
+# The libvirt uuid of the secret for the rbd_user volumes (string value)
+#rbd_secret_uuid = <None>
+
+# Maximum number of nested volume clones that are taken before a flatten
+# occurs. Set to 0 to disable cloning. (integer value)
+#rbd_max_clone_depth = 5
+
+# Volumes will be chunked into objects of this size (in megabytes). (integer
+# value)
+#rbd_store_chunk_size = 4
+
+# Timeout value (in seconds) used when connecting to ceph cluster. If value <
+# 0, no timeout is set and default librados value is used. (integer value)
+#rados_connect_timeout = -1
+
+# Number of retries if connection to ceph cluster failed. (integer value)
+#rados_connection_retries = 3
+
+# Interval value (in seconds) between connection retries to ceph cluster.
+# (integer value)
+#rados_connection_interval = 5
+
+# Timeout value (in seconds) used when connecting to ceph cluster to do a
+# demotion/promotion of volumes. If value < 0, no timeout is set and default
+# librados value is used. (integer value)
+#replication_connect_timeout = 5
+
+# Set to True for driver to report total capacity as a dynamic value -used +
+# current free- and to False to report a static value -quota max bytes if
+# defined and global size of cluster if not. (boolean value)
+#report_dynamic_total_capacity = true
+
+# Set to True if the pool is used exclusively by Cinder. On exclusive use
+# driver won't query images' provisioned size as they will match the value
+# calculated by the Cinder core code for allocated_capacity_gb. This reduces
+# the load on the Ceph cluster as well as on the volume service. (boolean
+# value)
+#rbd_exclusive_cinder_pool = false
+
+# IP address or Hostname of NAS system. (string value)
+#nas_host =
+
+# User name to connect to NAS system. (string value)
+#nas_login = admin
+
+# Password to connect to NAS system. (string value)
+#nas_password =
+
+# SSH port to use to connect to NAS system. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#nas_ssh_port = 22
+
+# Filename of private key to use for SSH authentication. (string value)
+#nas_private_key =
+
+# Allow network-attached storage systems to operate in a secure environment
+# where root level access is not permitted. If set to False, access is as the
+# root user and insecure. If set to True, access is not as root. If set to
+# auto, a check is done to determine if this is a new installation: True is
+# used if so, otherwise False. Default is auto. (string value)
+#nas_secure_file_operations = auto
+
+# Set more secure file permissions on network-attached storage volume files to
+# restrict broad other/world access. If set to False, volumes are created with
+# open permissions. If set to True, volumes are created with permissions for
+# the cinder user and group (660). If set to auto, a check is done to determine
+# if this is a new installation: True is used if so, otherwise False. Default
+# is auto. (string value)
+#nas_secure_file_permissions = auto
+
+# Path to the share to use for storing Cinder volumes. For example:
+# "/srv/export1" for an NFS server export available at 10.0.5.10:/srv/export1 .
+# (string value)
+#nas_share_path =
+
+# Options used to mount the storage backend file system where Cinder volumes
+# are stored. (string value)
+#nas_mount_options = <None>
+
+# Provisioning type that will be used when creating volumes. (string value)
+# Possible values:
+# thin - <No description provided>
+# thick - <No description provided>
+#nas_volume_prov_type = thin
+
+# Pool or Vdisk name to use for volume creation. (string value)
+#hpmsa_backend_name = A
+
+# linear (for Vdisk) or virtual (for Pool). (string value)
+# Possible values:
+# linear - <No description provided>
+# virtual - <No description provided>
+#hpmsa_backend_type = virtual
+
+# HPMSA API interface protocol. (string value)
+# Possible values:
+# http - <No description provided>
+# https - <No description provided>
+#hpmsa_api_protocol = https
+
+# Whether to verify HPMSA array SSL certificate. (boolean value)
+#hpmsa_verify_certificate = false
+
+# HPMSA array SSL certificate path. (string value)
+#hpmsa_verify_certificate_path = <None>
+
+# List of comma-separated target iSCSI IP addresses. (list value)
+#hpmsa_iscsi_ips =
+
+# Use thin provisioning for SAN volumes? (boolean value)
+#san_thin_provision = true
+
+# IP address of SAN controller (string value)
+#san_ip =
+
+# Username for SAN controller (string value)
+#san_login = admin
+
+# Password for SAN controller (string value)
+#san_password =
+
+# Filename of private key to use for SSH authentication (string value)
+#san_private_key =
+
+# Cluster name to use for creating volumes (string value)
+#san_clustername =
+
+# SSH port to use with SAN (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_ssh_port = 22
+
+# Port to use to access the SAN API (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#san_api_port = <None>
+
+# Execute commands locally instead of over SSH; use if the volume service is
+# running on the SAN device (boolean value)
+#san_is_local = false
+
+# SSH connection timeout in seconds (integer value)
+#ssh_conn_timeout = 30
+
+# Minimum ssh connections in the pool (integer value)
+#ssh_min_pool_conn = 1
+
+# Maximum ssh connections in the pool (integer value)
+#ssh_max_pool_conn = 5
+
+# IP address of sheep daemon. (string value)
+#sheepdog_store_address = 127.0.0.1
+
+# Port of sheep daemon. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sheepdog_store_port = 7000
+
+# Set 512 byte emulation on volume creation;  (boolean value)
+#sf_emulate_512 = true
+
+# Allow tenants to specify QOS on create (boolean value)
+#sf_allow_tenant_qos = false
+
+# Create SolidFire accounts with this prefix. Any string can be used here, but
+# the string "hostname" is special and will create a prefix using the cinder
+# node hostname (previous default behavior).  The default is NO prefix. (string
+# value)
+#sf_account_prefix = <None>
+
+# Create SolidFire volumes with this prefix. Volume names are of the form
+# <sf_volume_prefix><cinder-volume-id>.  The default is to use a prefix of
+# 'UUID-'. (string value)
+#sf_volume_prefix = UUID-
+
+# Account name on the SolidFire Cluster to use as owner of template/cache
+# volumes (created if does not exist). (string value)
+#sf_template_account_name = openstack-vtemplate
+
+# DEPRECATED: This option is deprecated and will be removed in the next
+# OpenStack release.  Please use the general cinder image-caching feature
+# instead. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: The Cinder caching feature should be used rather than this driver
+# specific implementation.
+#sf_allow_template_caching = false
+
+# Overrides default cluster SVIP with the one specified. This is required or
+# deployments that have implemented the use of VLANs for iSCSI networks in
+# their cloud. (string value)
+#sf_svip = <None>
+
+# SolidFire API port. Useful if the device api is behind a proxy on a different
+# port. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#sf_api_port = 443
+
+# Utilize volume access groups on a per-tenant basis. (boolean value)
+#sf_enable_vag = false
+
+# Volume on Synology storage to be used for creating lun. (string value)
+#synology_pool_name =
+
+# Management port for Synology storage. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#synology_admin_port = 5000
+
+# Administrator of Synology storage. (string value)
+#synology_username = admin
+
+# Password of administrator for logging in Synology storage. (string value)
+#synology_password =
+
+# Do certificate validation or not if $driver_use_ssl is True (boolean value)
+#synology_ssl_verify = true
+
+# One time password of administrator for logging in Synology storage if OTP is
+# enabled. (string value)
+#synology_one_time_pass = <None>
+
+# Device id for skip one time password check for logging in Synology storage if
+# OTP is enabled. (string value)
+#synology_device_id = <None>
+
+# The hostname (or IP address) for the storage system (string value)
+#tintri_server_hostname = <None>
+
+# User name for the storage system (string value)
+#tintri_server_username = <None>
+
+# Password for the storage system (string value)
+#tintri_server_password = <None>
+
+# API version for the storage system (string value)
+#tintri_api_version = v310
+
+# Delete unused image snapshots older than mentioned days (integer value)
+#tintri_image_cache_expiry_days = 30
+
+# Path to image nfs shares file (string value)
+#tintri_image_shares_config = <None>
+
+# IP address for connecting to VMware vCenter server. (string value)
+#vmware_host_ip = <None>
+
+# Port number for connecting to VMware vCenter server. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#vmware_host_port = 443
+
+# Username for authenticating with VMware vCenter server. (string value)
+#vmware_host_username = <None>
+
+# Password for authenticating with VMware vCenter server. (string value)
+#vmware_host_password = <None>
+
+# Optional VIM service WSDL Location e.g http://<server>/vimService.wsdl.
+# Optional over-ride to default location for bug work-arounds. (string value)
+#vmware_wsdl_location = <None>
+
+# Number of times VMware vCenter server API must be retried upon connection
+# related issues. (integer value)
+#vmware_api_retry_count = 10
+
+# The interval (in seconds) for polling remote tasks invoked on VMware vCenter
+# server. (floating point value)
+#vmware_task_poll_interval = 2.0
+
+# Name of the vCenter inventory folder that will contain Cinder volumes. This
+# folder will be created under "OpenStack/<project_folder>", where
+# project_folder is of format "Project (<volume_project_id>)". (string value)
+#vmware_volume_folder = Volumes
+
+# Timeout in seconds for VMDK volume transfer between Cinder and Glance.
+# (integer value)
+#vmware_image_transfer_timeout_secs = 7200
+
+# Max number of objects to be retrieved per batch. Query results will be
+# obtained in batches from the server and not in one shot. Server may still
+# limit the count to something less than the configured value. (integer value)
+#vmware_max_objects_retrieval = 100
+
+# Optional string specifying the VMware vCenter server version. The driver
+# attempts to retrieve the version from VMware vCenter server. Set this
+# configuration only if you want to override the vCenter server version.
+# (string value)
+#vmware_host_version = <None>
+
+# Directory where virtual disks are stored during volume backup and restore.
+# (string value)
+#vmware_tmp_dir = /tmp
+
+# CA bundle file to use in verifying the vCenter server certificate. (string
+# value)
+#vmware_ca_file = <None>
+
+# If true, the vCenter server certificate is not verified. If false, then the
+# default CA truststore is used for verification. This option is ignored if
+# "vmware_ca_file" is set. (boolean value)
+#vmware_insecure = false
+
+# Name of a vCenter compute cluster where volumes should be created. (multi
+# valued)
+#vmware_cluster_name =
+
+# Maximum number of connections in http connection pool. (integer value)
+#vmware_connection_pool_size = 10
+
+# Default adapter type to be used for attaching volumes. (string value)
+# Possible values:
+# lsiLogic - <No description provided>
+# busLogic - <No description provided>
+# lsiLogicsas - <No description provided>
+# paraVirtual - <No description provided>
+# ide - <No description provided>
+#vmware_adapter_type = lsiLogic
+
+# Volume snapshot format in vCenter server. (string value)
+# Possible values:
+# template - <No description provided>
+# COW - <No description provided>
+#vmware_snapshot_format = template
+
+# If true, the backend volume in vCenter server is created lazily when the
+# volume is created without any source. The backend volume is created when the
+# volume is attached, uploaded to image service or during backup. (boolean
+# value)
+#vmware_lazy_create = true
+
+# Regular expression pattern to match the name of datastores where backend
+# volumes are created. (string value)
+#vmware_datastore_regex = <None>
+
+# File with the list of available vzstorage shares. (string value)
+#vzstorage_shares_config = /etc/cinder/vzstorage_shares
+
+# Create volumes as sparsed files which take no space rather than regular files
+# when using raw format, in which case volume creation takes lot of time.
+# (boolean value)
+#vzstorage_sparsed_volumes = true
+
+# Percent of ACTUAL usage of the underlying volume before no new volumes can be
+# allocated to the volume destination. (floating point value)
+#vzstorage_used_ratio = 0.95
+
+# Base dir containing mount points for vzstorage shares. (string value)
+#vzstorage_mount_point_base = $state_path/mnt
+
+# Mount options passed to the vzstorage client. See section of the pstorage-
+# mount man page for details. (list value)
+#vzstorage_mount_options = <None>
+
+# Default format that will be used when creating volumes if no volume format is
+# specified. (string value)
+#vzstorage_default_volume_format = raw
+
+# Path to store VHD backed volumes (string value)
+#windows_iscsi_lun_path = C:\iSCSIVirtualDisks
+
+# File with the list of available smbfs shares. (string value)
+#smbfs_shares_config = C:\OpenStack\smbfs_shares.txt
+
+# Default format that will be used when creating volumes if no volume format is
+# specified. (string value)
+# Possible values:
+# vhd - <No description provided>
+# vhdx - <No description provided>
+#smbfs_default_volume_format = vhd
+
+# Base dir containing mount points for smbfs shares. (string value)
+#smbfs_mount_point_base = C:\OpenStack\_mnt
+
+# Mappings between share locations and pool names. If not specified, the share
+# names will be used as pool names. Example:
+# //addr/share:pool_name,//addr/share2:pool_name2 (dict value)
+#smbfs_pool_mappings =
+
+# VPSA - Use ISER instead of iSCSI (boolean value)
+#zadara_use_iser = true
+
+# VPSA - Management Host name or IP address (string value)
+#zadara_vpsa_host = <None>
+
+# VPSA - Port number (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#zadara_vpsa_port = <None>
+
+# VPSA - Use SSL connection (boolean value)
+#zadara_vpsa_use_ssl = false
+
+# If set to True the http client will validate the SSL certificate of the VPSA
+# endpoint. (boolean value)
+#zadara_ssl_cert_verify = true
+
+# VPSA - Username (string value)
+#zadara_user = <None>
+
+# VPSA - Password (string value)
+#zadara_password = <None>
+
+# VPSA - Storage Pool assigned for volumes (string value)
+#zadara_vpsa_poolname = <None>
+
+# VPSA - Default encryption policy for volumes (boolean value)
+#zadara_vol_encrypt = false
+
+# VPSA - Default template for VPSA volume names (string value)
+#zadara_vol_name_template = OS_%s
+
+# VPSA - Attach snapshot policy for volumes (boolean value)
+#zadara_default_snap_policy = false
+
+# Storage pool name. (string value)
+#zfssa_pool = <None>
+
+# Project name. (string value)
+#zfssa_project = <None>
+
+# Block size. (string value)
+# Possible values:
+# 512 - <No description provided>
+# 1k - <No description provided>
+# 2k - <No description provided>
+# 4k - <No description provided>
+# 8k - <No description provided>
+# 16k - <No description provided>
+# 32k - <No description provided>
+# 64k - <No description provided>
+# 128k - <No description provided>
+#zfssa_lun_volblocksize = 8k
+
+# Flag to enable sparse (thin-provisioned): True, False. (boolean value)
+#zfssa_lun_sparse = false
+
+# Data compression. (string value)
+# Possible values:
+# off - <No description provided>
+# lzjb - <No description provided>
+# gzip-2 - <No description provided>
+# gzip - <No description provided>
+# gzip-9 - <No description provided>
+#zfssa_lun_compression = off
+
+# Synchronous write bias. (string value)
+# Possible values:
+# latency - <No description provided>
+# throughput - <No description provided>
+#zfssa_lun_logbias = latency
+
+# iSCSI initiator group. (string value)
+#zfssa_initiator_group =
+
+# iSCSI initiator IQNs. (comma separated) (string value)
+#zfssa_initiator =
+
+# iSCSI initiator CHAP user (name). (string value)
+#zfssa_initiator_user =
+
+# Secret of the iSCSI initiator CHAP user. (string value)
+#zfssa_initiator_password =
+
+# iSCSI initiators configuration. (string value)
+#zfssa_initiator_config =
+
+# iSCSI target group name. (string value)
+#zfssa_target_group = tgt-grp
+
+# iSCSI target CHAP user (name). (string value)
+#zfssa_target_user =
+
+# Secret of the iSCSI target CHAP user. (string value)
+#zfssa_target_password =
+
+# iSCSI target portal (Data-IP:Port, w.x.y.z:3260). (string value)
+#zfssa_target_portal = <None>
+
+# Network interfaces of iSCSI targets. (comma separated) (string value)
+#zfssa_target_interfaces = <None>
+
+# REST connection timeout. (seconds) (integer value)
+#zfssa_rest_timeout = <None>
+
+# IP address used for replication data. (maybe the same as data ip) (string
+# value)
+#zfssa_replication_ip =
+
+# Flag to enable local caching: True, False. (boolean value)
+#zfssa_enable_local_cache = true
+
+# Name of ZFSSA project where cache volumes are stored. (string value)
+#zfssa_cache_project = os-cinder-cache
+
+# Driver policy for volume manage. (string value)
+# Possible values:
+# loose - <No description provided>
+# strict - <No description provided>
+#zfssa_manage_policy = loose
+
+# Data path IP address (string value)
+#zfssa_data_ip = <None>
+
+# HTTPS port number (string value)
+#zfssa_https_port = 443
+
+# Options to be passed while mounting share over nfs (string value)
+#zfssa_nfs_mount_options =
+
+# Storage pool name. (string value)
+#zfssa_nfs_pool =
+
+# Project name. (string value)
+#zfssa_nfs_project = NFSProject
+
+# Share name. (string value)
+#zfssa_nfs_share = nfs_share
+
+# Data compression. (string value)
+# Possible values:
+# off - <No description provided>
+# lzjb - <No description provided>
+# gzip-2 - <No description provided>
+# gzip - <No description provided>
+# gzip-9 - <No description provided>
+#zfssa_nfs_share_compression = off
+
+# Synchronous write bias-latency, throughput. (string value)
+# Possible values:
+# latency - <No description provided>
+# throughput - <No description provided>
+#zfssa_nfs_share_logbias = latency
+
+# Name of directory inside zfssa_nfs_share where cache volumes are stored.
+# (string value)
+#zfssa_cache_directory = os-cinder-cache
+
+# Driver to use for volume creation (string value)
+#volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+
+# User defined capabilities, a JSON formatted string specifying key/value
+# pairs. The key/value pairs can be used by the CapabilitiesFilter to select
+# between backends when requests specify volume types. For example, specifying
+# a service level or the geographical location of a backend, then creating a
+# volume type to allow the user to select by these different properties.
+# (string value)
+#extra_capabilities = {}
+
+# Suppress requests library SSL certificate warnings. (boolean value)
+#suppress_requests_ssl_warnings = false
+
+# Size of the native threads pool for the backend.  Increase for backends that
+# heavily rely on this, like the RBD driver. (integer value)
+# Minimum value: 20
+#backend_native_threads_pool_size = 20
+
+
+[coordination]
+
+#
+# From cinder
+#
+
+# The backend URL to use for distributed coordination. (string value)
+#backend_url = file://$state_path
+
+
+[fc-zone-manager]
+
+#
+# From cinder
+#
+
+# South bound connector for zoning operation (string value)
+#brcd_sb_connector = HTTP
+
+# Southbound connector for zoning operation (string value)
+#cisco_sb_connector = cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI
+
+# FC Zone Driver responsible for zone management (string value)
+#zone_driver = cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver
+
+# Zoning policy configured by user; valid values include "initiator-target" or
+# "initiator" (string value)
+#zoning_policy = initiator-target
+
+# Comma separated list of Fibre Channel fabric names. This list of names is
+# used to retrieve other SAN credentials for connecting to each SAN fabric
+# (string value)
+#fc_fabric_names = <None>
+
+# FC SAN Lookup Service (string value)
+#fc_san_lookup_service = cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService
+
+# Set this to True when you want to allow an unsupported zone manager driver to
+# start.  Drivers that haven't maintained a working CI system and testing are
+# marked as unsupported until CI is working again.  This also marks a driver as
+# deprecated and may be removed in the next release. (boolean value)
+#enable_unsupported_driver = false
+
+
+[nova]
+
+#
+# From cinder
+#
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#interface = public
+
+# The authentication URL for the nova connection when using the current users
+# token (string value)
+#token_auth_url = <None>
+
+# PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# (string value)
+#cafile = <None>
+
+# PEM encoded client certificate cert file (string value)
+#certfile = <None>
+
+# PEM encoded client certificate key file (string value)
+#keyfile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+
+[service_user]
+
+#
+# From cinder
+#
+
+#
+# When True, if sending a user token to an REST API, also send a service token.
+#  (boolean value)
+#send_service_user_token = false
+[barbican]
+#
+# From castellan.config
+#
+
+# Use this endpoint to connect to Barbican, for example:
+# "http://localhost:9311/" (string value)
+#barbican_endpoint = <None>
+
+# Version of the Barbican API, for example: "v1" (string value)
+#barbican_api_version = <None>
+
+# Use this endpoint to connect to Keystone (string value)
+# Deprecated group/name - [key_manager]/auth_url
+#auth_endpoint = http://localhost/identity/v3
+auth_endpoint = http://192.168.10.35:35357/v3
+
+# Number of seconds to wait before retrying poll for key creation completion
+# (integer value)
+#retry_delay = 1
+
+# Number of times to retry poll for key creation completion (integer value)
+#number_of_retries = 60
+
+# Specifies if insecure TLS (https) requests. If False, the server's
+# certificate will not be validated (boolean value)
+#verify_ssl = true
+
+# Specifies the type of endpoint.  Allowed values are: public, internal, and
+# admin (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+#barbican_endpoint_type = public
+barbican_endpoint_type = internal
+
+
+[key_manager]
+#
+# From castellan.config
+#
+
+# Specify the key manager implementation. Options are "barbican" and "vault".
+# Default is  "barbican". Will support the  values earlier set using
+# [key_manager]/api_class for some time. (string value)
+# Deprecated group/name - [key_manager]/api_class
+#backend = barbican
+backend = barbican
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = cinder
+
+[keystone_authtoken]
+
+#
+# From keystonemiddleware.auth_token
+#
+
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
+# Deprecated group/name - [keystone_authtoken]/auth_uri
+#www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
+# This option is deprecated for removal since Queens.
+# Its value may be silently ignored in the future.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
+#auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
+#delay_auth_decision = false
+
+# Request timeout value for communicating with Identity API server. (integer
+# value)
+#http_connect_timeout = <None>
+
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
+#http_request_max_retries = 3
+
+# Request environment key where the Swift cache object is stored. When
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
+#cache = <None>
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# The region in which the identity server can be found. (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#signing_dir = <None>
+
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
+# Deprecated group/name - [keystone_authtoken]/memcache_servers
+#memcached_servers = <None>
+memcached_servers=192.168.10.36:11211,192.168.10.37:11211,192.168.10.38:11211
+
+# In order to prevent excessive effort spent validating tokens, the middleware
+# caches previously-seen tokens for a configurable duration (in seconds). Set
+# to -1 to disable caching completely. (integer value)
+#token_cache_time = 300
+
+# DEPRECATED: Determines the frequency at which the list of revoked tokens is
+# retrieved from the Identity service (in seconds). A high number of revocation
+# events combined with a low cache duration may significantly reduce
+# performance. Only valid for PKI tokens. This option has been deprecated in
+# the Ocata release and will be removed in the P release. (integer value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#revocation_cache_time = 10
+
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
+#memcache_pool_dead_retry = 300
+
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
+#memcache_pool_maxsize = 10
+
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
+#memcache_pool_socket_timeout = 3
+
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
+#memcache_pool_unused_timeout = 60
+
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
+#memcache_pool_conn_get_timeout = 10
+
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
+#memcache_use_advanced_pool = false
+
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
+#include_service_catalog = true
+
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
+#enforce_token_bind = permissive
+
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#check_revocations_for_cached = false
+
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
+# performance. (list value)
+# This option is deprecated for removal since Ocata.
+# Its value may be silently ignored in the future.
+# Reason: PKI token format is no longer supported.
+#hash_algorithms = md5
+
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
+#service_token_roles = service
+
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
+#service_token_roles_required = false
+
+# Authentication type to load (string value)
+# Deprecated group/name - [keystone_authtoken]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
+#auth_section = <None>
+
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = cinder
+
+[profiler]
+
+[oslo_concurrency]
 
 [database]
-connection = sqlite:////var/lib/cinder/cinder.sqlite
+#
+# From oslo.db
+#
+
+# If True, SQLite uses synchronous mode. (boolean value)
+#sqlite_synchronous = true
+
+# The back end to use for the database. (string value)
+# Deprecated group/name - [DEFAULT]/db_backend
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
+# Deprecated group/name - [DEFAULT]/sql_connection
+# Deprecated group/name - [DATABASE]/sql_connection
+# Deprecated group/name - [sql]/connection
+#connection = <None>
+connection = mysql+pymysql://cinder:opnfv_secret@192.168.10.23/cinder?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
+#slave_connection = <None>
+
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
+#mysql_sql_mode = TRADITIONAL
+
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
+#mysql_enable_ndb = false
+
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
+# Deprecated group/name - [DATABASE]/idle_timeout
+# Deprecated group/name - [database]/idle_timeout
+# Deprecated group/name - [DEFAULT]/sql_idle_timeout
+# Deprecated group/name - [DATABASE]/sql_idle_timeout
+# Deprecated group/name - [sql]/idle_timeout
+#connection_recycle_time = 3600
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_min_pool_size
+# Deprecated group/name - [DATABASE]/sql_min_pool_size
+#min_pool_size = 1
+
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_pool_size
+# Deprecated group/name - [DATABASE]/sql_max_pool_size
+#max_pool_size = 5
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
+# Deprecated group/name - [DEFAULT]/sql_max_retries
+# Deprecated group/name - [DATABASE]/sql_max_retries
+#max_retries = 10
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_retry_interval
+# Deprecated group/name - [DATABASE]/reconnect_interval
+#retry_interval = 10
+
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DEFAULT]/sql_max_overflow
+# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
+#max_overflow = 50
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
+# Minimum value: 0
+# Maximum value: 100
+# Deprecated group/name - [DEFAULT]/sql_connection_debug
+#connection_debug = 0
+
+# Add Python stack traces to SQL as comment strings. (boolean value)
+# Deprecated group/name - [DEFAULT]/sql_connection_trace
+#connection_trace = false
+
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
+# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
+#pool_timeout = <None>
+
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
+#use_db_reconnect = false
+
+# Seconds between retries of a database transaction. (integer value)
+#db_retry_interval = 1
+
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
+#db_inc_retry_interval = true
+
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
+#db_max_retry_interval = 10
+
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
+#db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[oslo_reports]

2019-05-09 14:33:41,745 [salt.state       :1951][INFO    ][23696] Completed state [/etc/cinder/cinder.conf] at time 14:33:41.745802 duration_in_ms=470.641
2019-05-09 14:33:41,747 [salt.state       :1780][INFO    ][23696] Running state [/etc/cinder/api-paste.ini] at time 14:33:41.746955
2019-05-09 14:33:41,747 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/cinder/api-paste.ini]
2019-05-09 14:33:41,769 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/files/rocky/api-paste.ini.controller.Debian'
2019-05-09 14:33:41,842 [salt.state       :300 ][INFO    ][23696] {'mode': '0640'}
2019-05-09 14:33:41,842 [salt.state       :1951][INFO    ][23696] Completed state [/etc/cinder/api-paste.ini] at time 14:33:41.842616 duration_in_ms=95.66
2019-05-09 14:33:41,844 [salt.state       :1780][INFO    ][23696] Running state [cinder-manage db sync; sleep 5;] at time 14:33:41.844739
2019-05-09 14:33:41,845 [salt.state       :1813][INFO    ][23696] Executing state cmd.run for [cinder-manage db sync; sleep 5;]
2019-05-09 14:33:41,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command '/bin/false' in directory '/root'
2019-05-09 14:33:41,870 [salt.state       :300 ][INFO    ][23696] onlyif execution failed
2019-05-09 14:33:41,871 [salt.state       :1951][INFO    ][23696] Completed state [cinder-manage db sync; sleep 5;] at time 14:33:41.871365 duration_in_ms=26.627
2019-05-09 14:33:41,872 [salt.state       :1780][INFO    ][23696] Running state [/etc/default/cinder-scheduler] at time 14:33:41.872900
2019-05-09 14:33:41,873 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/default/cinder-scheduler]
2019-05-09 14:33:41,897 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/files/default'
2019-05-09 14:33:41,916 [salt.state       :300 ][INFO    ][23696] File changed:
New file
2019-05-09 14:33:41,917 [salt.state       :1951][INFO    ][23696] Completed state [/etc/default/cinder-scheduler] at time 14:33:41.917434 duration_in_ms=44.532
2019-05-09 14:33:41,920 [salt.state       :1780][INFO    ][23696] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 14:33:41.920124
2019-05-09 14:33:41,920 [salt.state       :1813][INFO    ][23696] Executing state file.managed for [/etc/apache2/conf-available/cinder-wsgi.conf]
2019-05-09 14:33:41,950 [salt.fileclient  :1219][INFO    ][23696] Fetching file from saltenv 'base', ** done ** 'cinder/files/rocky/cinder-wsgi.conf'
2019-05-09 14:33:42,071 [salt.state       :300 ][INFO    ][23696] File changed:
New file
2019-05-09 14:33:42,071 [salt.state       :1951][INFO    ][23696] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 14:33:42.071716 duration_in_ms=151.592
2019-05-09 14:33:42,074 [salt.state       :1780][INFO    ][23696] Running state [cinder-wsgi] at time 14:33:42.074347
2019-05-09 14:33:42,074 [salt.state       :1813][INFO    ][23696] Executing state apache_conf.enabled for [cinder-wsgi]
2019-05-09 14:33:42,075 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['a2enconf', 'cinder-wsgi'] in directory '/root'
2019-05-09 14:33:42,139 [salt.state       :300 ][INFO    ][23696] {'new': 'cinder-wsgi', 'old': None}
2019-05-09 14:33:42,140 [salt.state       :1951][INFO    ][23696] Completed state [cinder-wsgi] at time 14:33:42.140299 duration_in_ms=65.952
2019-05-09 14:33:42,142 [salt.state       :1780][INFO    ][23696] Running state [cinder-api] at time 14:33:42.142380
2019-05-09 14:33:42,142 [salt.state       :1813][INFO    ][23696] Executing state service.dead for [cinder-api]
2019-05-09 14:33:42,143 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2019-05-09 14:33:42,157 [salt.state       :300 ][INFO    ][23696] The named service cinder-api is not available
2019-05-09 14:33:42,157 [salt.state       :1951][INFO    ][23696] Completed state [cinder-api] at time 14:33:42.157417 duration_in_ms=15.037
2019-05-09 14:33:42,160 [salt.state       :1780][INFO    ][23696] Running state [apache2] at time 14:33:42.160216
2019-05-09 14:33:42,160 [salt.state       :1813][INFO    ][23696] Executing state service.running for [apache2]
2019-05-09 14:33:42,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:33:42,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:33:42,189 [salt.state       :300 ][INFO    ][23696] The service apache2 is already running
2019-05-09 14:33:42,189 [salt.state       :1951][INFO    ][23696] Completed state [apache2] at time 14:33:42.189303 duration_in_ms=29.086
2019-05-09 14:33:42,189 [salt.state       :1780][INFO    ][23696] Running state [apache2] at time 14:33:42.189574
2019-05-09 14:33:42,189 [salt.state       :1813][INFO    ][23696] Executing state service.mod_watch for [apache2]
2019-05-09 14:33:42,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:33:42,203 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-05-09 14:33:43,702 [salt.state       :300 ][INFO    ][23696] {'apache2': True}
2019-05-09 14:33:43,703 [salt.state       :1951][INFO    ][23696] Completed state [apache2] at time 14:33:43.702985 duration_in_ms=1513.411
2019-05-09 14:33:43,705 [salt.state       :1780][INFO    ][23696] Running state [cinder-scheduler] at time 14:33:43.705367
2019-05-09 14:33:43,705 [salt.state       :1813][INFO    ][23696] Executing state service.running for [cinder-scheduler]
2019-05-09 14:33:43,708 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2019-05-09 14:33:43,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2019-05-09 14:33:43,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2019-05-09 14:33:43,752 [salt.state       :300 ][INFO    ][23696] The service cinder-scheduler is already running
2019-05-09 14:33:43,752 [salt.state       :1951][INFO    ][23696] Completed state [cinder-scheduler] at time 14:33:43.752910 duration_in_ms=47.542
2019-05-09 14:33:43,753 [salt.state       :1780][INFO    ][23696] Running state [cinder-scheduler] at time 14:33:43.753173
2019-05-09 14:33:43,753 [salt.state       :1813][INFO    ][23696] Executing state service.mod_watch for [cinder-scheduler]
2019-05-09 14:33:43,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2019-05-09 14:33:43,765 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'cinder-scheduler.service'] in directory '/root'
2019-05-09 14:33:43,789 [salt.state       :300 ][INFO    ][23696] {'cinder-scheduler': True}
2019-05-09 14:33:43,790 [salt.state       :1951][INFO    ][23696] Completed state [cinder-scheduler] at time 14:33:43.790188 duration_in_ms=37.015
2019-05-09 14:33:43,801 [salt.state       :1780][INFO    ][23696] Running state [lvm-driver] at time 14:33:43.801167
2019-05-09 14:33:43,801 [salt.state       :1813][INFO    ][23696] Executing state cinderv3.volume_type_present for [lvm-driver]
2019-05-09 14:33:43,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command ['git', '--version'] in directory '/root'
2019-05-09 14:33:44,142 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command '/bin/false' in directory '/root'
2019-05-09 14:33:44,156 [salt.state       :300 ][INFO    ][23696] onlyif execution failed
2019-05-09 14:33:44,157 [salt.state       :1951][INFO    ][23696] Completed state [lvm-driver] at time 14:33:44.157201 duration_in_ms=356.035
2019-05-09 14:33:44,158 [salt.state       :1780][INFO    ][23696] Running state [lvm-driver] at time 14:33:44.158559
2019-05-09 14:33:44,158 [salt.state       :1813][INFO    ][23696] Executing state cinderv3.volume_type_key_present for [lvm-driver]
2019-05-09 14:33:44,164 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23696] Executing command '/bin/false' in directory '/root'
2019-05-09 14:33:44,176 [salt.state       :300 ][INFO    ][23696] onlyif execution failed
2019-05-09 14:33:44,177 [salt.state       :1951][INFO    ][23696] Completed state [lvm-driver] at time 14:33:44.177226 duration_in_ms=18.667
2019-05-09 14:33:44,184 [salt.minion      :1711][INFO    ][23696] Returning information for job: 20190509143316073465
2019-05-09 14:33:50,254 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509143350247346
2019-05-09 14:33:50,267 [salt.minion      :1432][INFO    ][25152] Starting a new job with PID 25152
2019-05-09 14:33:56,882 [salt.state       :915 ][INFO    ][25152] Loading fresh modules for state activity
2019-05-09 14:33:59,745 [salt.state       :1780][INFO    ][25152] Running state [apache2] at time 14:33:59.745680
2019-05-09 14:33:59,746 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [apache2]
2019-05-09 14:33:59,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:34:00,081 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:00,081 [salt.state       :1951][INFO    ][25152] Completed state [apache2] at time 14:34:00.081445 duration_in_ms=335.765
2019-05-09 14:34:00,081 [salt.state       :1780][INFO    ][25152] Running state [openssl] at time 14:34:00.081798
2019-05-09 14:34:00,082 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [openssl]
2019-05-09 14:34:00,089 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:00,090 [salt.state       :1951][INFO    ][25152] Completed state [openssl] at time 14:34:00.089984 duration_in_ms=8.186
2019-05-09 14:34:00,090 [salt.state       :1780][INFO    ][25152] Running state [a2enmod ssl] at time 14:34:00.090687
2019-05-09 14:34:00,090 [salt.state       :1813][INFO    ][25152] Executing state cmd.run for [a2enmod ssl]
2019-05-09 14:34:00,091 [salt.state       :300 ][INFO    ][25152] /etc/apache2/mods-enabled/ssl.load exists
2019-05-09 14:34:00,091 [salt.state       :1951][INFO    ][25152] Completed state [a2enmod ssl] at time 14:34:00.091382 duration_in_ms=0.695
2019-05-09 14:34:00,091 [salt.state       :1780][INFO    ][25152] Running state [a2enmod rewrite] at time 14:34:00.091829
2019-05-09 14:34:00,092 [salt.state       :1813][INFO    ][25152] Executing state cmd.run for [a2enmod rewrite]
2019-05-09 14:34:00,092 [salt.state       :300 ][INFO    ][25152] /etc/apache2/mods-enabled/rewrite.load exists
2019-05-09 14:34:00,092 [salt.state       :1951][INFO    ][25152] Completed state [a2enmod rewrite] at time 14:34:00.092479 duration_in_ms=0.649
2019-05-09 14:34:00,092 [salt.state       :1780][INFO    ][25152] Running state [libapache2-mod-wsgi] at time 14:34:00.092925
2019-05-09 14:34:00,093 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-05-09 14:34:00,101 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:00,101 [salt.state       :1951][INFO    ][25152] Completed state [libapache2-mod-wsgi] at time 14:34:00.101472 duration_in_ms=8.547
2019-05-09 14:34:00,101 [salt.state       :1780][INFO    ][25152] Running state [a2enmod wsgi] at time 14:34:00.101901
2019-05-09 14:34:00,102 [salt.state       :1813][INFO    ][25152] Executing state cmd.run for [a2enmod wsgi]
2019-05-09 14:34:00,102 [salt.state       :300 ][INFO    ][25152] /etc/apache2/mods-enabled/wsgi.load exists
2019-05-09 14:34:00,102 [salt.state       :1951][INFO    ][25152] Completed state [a2enmod wsgi] at time 14:34:00.102562 duration_in_ms=0.66
2019-05-09 14:34:00,103 [salt.state       :1780][INFO    ][25152] Running state [a2enmod status -q] at time 14:34:00.103003
2019-05-09 14:34:00,103 [salt.state       :1813][INFO    ][25152] Executing state cmd.run for [a2enmod status -q]
2019-05-09 14:34:00,103 [salt.state       :300 ][INFO    ][25152] /etc/apache2/mods-enabled/status.load exists
2019-05-09 14:34:00,103 [salt.state       :1951][INFO    ][25152] Completed state [a2enmod status -q] at time 14:34:00.103696 duration_in_ms=0.693
2019-05-09 14:34:00,107 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:34:00.107457
2019-05-09 14:34:00,107 [salt.state       :1813][INFO    ][25152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-05-09 14:34:00,108 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-05-09 14:34:00,108 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:34:00.108149 duration_in_ms=0.691
2019-05-09 14:34:00,108 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:34:00.108354
2019-05-09 14:34:00,108 [salt.state       :1813][INFO    ][25152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-05-09 14:34:00,108 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-05-09 14:34:00,108 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:34:00.108948 duration_in_ms=0.593
2019-05-09 14:34:00,109 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:34:00.109136
2019-05-09 14:34:00,109 [salt.state       :1813][INFO    ][25152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-05-09 14:34:00,109 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-05-09 14:34:00,109 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:34:00.109718 duration_in_ms=0.582
2019-05-09 14:34:00,109 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:34:00.109959
2019-05-09 14:34:00,110 [salt.state       :1813][INFO    ][25152] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-05-09 14:34:00,110 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-05-09 14:34:00,110 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:34:00.110550 duration_in_ms=0.591
2019-05-09 14:34:00,112 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 14:34:00.112582
2019-05-09 14:34:00,112 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-05-09 14:34:00,178 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-05-09 14:34:00,178 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 14:34:00.178929 duration_in_ms=66.347
2019-05-09 14:34:00,179 [salt.state       :1780][INFO    ][25152] Running state [a2enmod mpm_event] at time 14:34:00.179824
2019-05-09 14:34:00,180 [salt.state       :1813][INFO    ][25152] Executing state cmd.run for [a2enmod mpm_event]
2019-05-09 14:34:00,180 [salt.state       :300 ][INFO    ][25152] /etc/apache2/mods-enabled/mpm_event.load exists
2019-05-09 14:34:00,180 [salt.state       :1951][INFO    ][25152] Completed state [a2enmod mpm_event] at time 14:34:00.180548 duration_in_ms=0.723
2019-05-09 14:34:00,181 [salt.state       :1780][INFO    ][25152] Running state [apache_server_service_task] at time 14:34:00.181263
2019-05-09 14:34:00,181 [salt.state       :1813][INFO    ][25152] Executing state test.show_notification for [apache_server_service_task]
2019-05-09 14:34:00,181 [salt.state       :300 ][INFO    ][25152] Running apache.server.service
2019-05-09 14:34:00,181 [salt.state       :1951][INFO    ][25152] Completed state [apache_server_service_task] at time 14:34:00.181845 duration_in_ms=0.582
2019-05-09 14:34:00,182 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/ports.conf] at time 14:34:00.182287
2019-05-09 14:34:00,182 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/apache2/ports.conf]
2019-05-09 14:34:00,249 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/ports.conf is in the correct state
2019-05-09 14:34:00,250 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/ports.conf] at time 14:34:00.250081 duration_in_ms=67.794
2019-05-09 14:34:00,250 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/conf-available/security.conf] at time 14:34:00.250668
2019-05-09 14:34:00,250 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-05-09 14:34:00,317 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/conf-available/security.conf is in the correct state
2019-05-09 14:34:00,318 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/conf-available/security.conf] at time 14:34:00.318108 duration_in_ms=67.438
2019-05-09 14:34:00,330 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 14:34:00.330056
2019-05-09 14:34:00,330 [salt.state       :1813][INFO    ][25152] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-05-09 14:34:00,330 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-05-09 14:34:00,331 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 14:34:00.331110 duration_in_ms=1.055
2019-05-09 14:34:00,331 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:34:00.331695
2019-05-09 14:34:00,331 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-05-09 14:34:00,552 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-05-09 14:34:00,553 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:34:00.553128 duration_in_ms=221.433
2019-05-09 14:34:00,553 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:34:00.553670
2019-05-09 14:34:00,553 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-05-09 14:34:00,825 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-05-09 14:34:00,825 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:34:00.825937 duration_in_ms=272.266
2019-05-09 14:34:00,826 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:34:00.826478
2019-05-09 14:34:00,826 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-05-09 14:34:01,080 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-05-09 14:34:01,081 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:34:01.080997 duration_in_ms=254.519
2019-05-09 14:34:01,082 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:34:01.082061
2019-05-09 14:34:01,082 [salt.state       :1813][INFO    ][25152] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-05-09 14:34:01,083 [salt.state       :300 ][INFO    ][25152] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-05-09 14:34:01,084 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:34:01.083996 duration_in_ms=1.935
2019-05-09 14:34:01,086 [salt.state       :1780][INFO    ][25152] Running state [apache2] at time 14:34:01.086865
2019-05-09 14:34:01,087 [salt.state       :1813][INFO    ][25152] Executing state service.running for [apache2]
2019-05-09 14:34:01,087 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-05-09 14:34:01,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:34:01,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:34:01,145 [salt.state       :300 ][INFO    ][25152] The service apache2 is already running
2019-05-09 14:34:01,145 [salt.state       :1951][INFO    ][25152] Completed state [apache2] at time 14:34:01.145564 duration_in_ms=58.698
2019-05-09 14:34:01,146 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/conf-enabled/security.conf] at time 14:34:01.146735
2019-05-09 14:34:01,147 [salt.state       :1813][INFO    ][25152] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-05-09 14:34:01,149 [salt.state       :300 ][INFO    ][25152] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-05-09 14:34:01,149 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/conf-enabled/security.conf] at time 14:34:01.149164 duration_in_ms=2.429
2019-05-09 14:34:01,149 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:34:01.149411
2019-05-09 14:34:01,149 [salt.state       :1813][INFO    ][25152] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-05-09 14:34:01,149 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-05-09 14:34:01,150 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:34:01.150121 duration_in_ms=0.71
2019-05-09 14:34:01,151 [salt.state       :1780][INFO    ][25152] Running state [cinder-scheduler] at time 14:34:01.151728
2019-05-09 14:34:01,151 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [cinder-scheduler]
2019-05-09 14:34:01,160 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:01,160 [salt.state       :1951][INFO    ][25152] Completed state [cinder-scheduler] at time 14:34:01.160486 duration_in_ms=8.758
2019-05-09 14:34:01,160 [salt.state       :1780][INFO    ][25152] Running state [lvm2] at time 14:34:01.160674
2019-05-09 14:34:01,160 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [lvm2]
2019-05-09 14:34:01,168 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:01,168 [salt.state       :1951][INFO    ][25152] Completed state [lvm2] at time 14:34:01.168376 duration_in_ms=7.702
2019-05-09 14:34:01,168 [salt.state       :1780][INFO    ][25152] Running state [python-cinder] at time 14:34:01.168569
2019-05-09 14:34:01,168 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [python-cinder]
2019-05-09 14:34:01,176 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:01,176 [salt.state       :1951][INFO    ][25152] Completed state [python-cinder] at time 14:34:01.176168 duration_in_ms=7.6
2019-05-09 14:34:01,176 [salt.state       :1780][INFO    ][25152] Running state [gettext-base] at time 14:34:01.176382
2019-05-09 14:34:01,176 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [gettext-base]
2019-05-09 14:34:01,183 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:01,183 [salt.state       :1951][INFO    ][25152] Completed state [gettext-base] at time 14:34:01.183866 duration_in_ms=7.483
2019-05-09 14:34:01,184 [salt.state       :1780][INFO    ][25152] Running state [python-memcache] at time 14:34:01.184064
2019-05-09 14:34:01,184 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [python-memcache]
2019-05-09 14:34:01,193 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:01,193 [salt.state       :1951][INFO    ][25152] Completed state [python-memcache] at time 14:34:01.193285 duration_in_ms=9.221
2019-05-09 14:34:01,193 [salt.state       :1780][INFO    ][25152] Running state [python-pycadf] at time 14:34:01.193476
2019-05-09 14:34:01,193 [salt.state       :1813][INFO    ][25152] Executing state pkg.installed for [python-pycadf]
2019-05-09 14:34:01,201 [salt.state       :300 ][INFO    ][25152] All specified packages are already installed
2019-05-09 14:34:01,201 [salt.state       :1951][INFO    ][25152] Completed state [python-pycadf] at time 14:34:01.201150 duration_in_ms=7.674
2019-05-09 14:34:01,202 [salt.state       :1780][INFO    ][25152] Running state [cinder_controller_ssl_mysql] at time 14:34:01.202354
2019-05-09 14:34:01,202 [salt.state       :1813][INFO    ][25152] Executing state test.show_notification for [cinder_controller_ssl_mysql]
2019-05-09 14:34:01,202 [salt.state       :300 ][INFO    ][25152] Running cinder._ssl.controller_mysql
2019-05-09 14:34:01,202 [salt.state       :1951][INFO    ][25152] Completed state [cinder_controller_ssl_mysql] at time 14:34:01.202944 duration_in_ms=0.59
2019-05-09 14:34:01,203 [salt.state       :1780][INFO    ][25152] Running state [cinder_controller_ssl_rabbitmq] at time 14:34:01.203329
2019-05-09 14:34:01,203 [salt.state       :1813][INFO    ][25152] Executing state test.show_notification for [cinder_controller_ssl_rabbitmq]
2019-05-09 14:34:01,203 [salt.state       :300 ][INFO    ][25152] Running cinder._ssl.rabbitmq
2019-05-09 14:34:01,203 [salt.state       :1951][INFO    ][25152] Completed state [cinder_controller_ssl_rabbitmq] at time 14:34:01.203930 duration_in_ms=0.6
2019-05-09 14:34:01,204 [salt.state       :1780][INFO    ][25152] Running state [/etc/cinder/cinder.conf] at time 14:34:01.204622
2019-05-09 14:34:01,204 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/cinder/cinder.conf]
2019-05-09 14:34:01,571 [salt.state       :300 ][INFO    ][25152] File /etc/cinder/cinder.conf is in the correct state
2019-05-09 14:34:01,571 [salt.state       :1951][INFO    ][25152] Completed state [/etc/cinder/cinder.conf] at time 14:34:01.571590 duration_in_ms=366.967
2019-05-09 14:34:01,572 [salt.state       :1780][INFO    ][25152] Running state [/etc/cinder/api-paste.ini] at time 14:34:01.572562
2019-05-09 14:34:01,572 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/cinder/api-paste.ini]
2019-05-09 14:34:01,660 [salt.state       :300 ][INFO    ][25152] File /etc/cinder/api-paste.ini is in the correct state
2019-05-09 14:34:01,660 [salt.state       :1951][INFO    ][25152] Completed state [/etc/cinder/api-paste.ini] at time 14:34:01.660800 duration_in_ms=88.236
2019-05-09 14:34:01,661 [salt.state       :1780][INFO    ][25152] Running state [cinder-manage db sync; sleep 5;] at time 14:34:01.661932
2019-05-09 14:34:01,662 [salt.state       :1813][INFO    ][25152] Executing state cmd.run for [cinder-manage db sync; sleep 5;]
2019-05-09 14:34:01,663 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command '/bin/false' in directory '/root'
2019-05-09 14:34:01,686 [salt.state       :300 ][INFO    ][25152] onlyif execution failed
2019-05-09 14:34:01,687 [salt.state       :1951][INFO    ][25152] Completed state [cinder-manage db sync; sleep 5;] at time 14:34:01.687053 duration_in_ms=25.121
2019-05-09 14:34:01,688 [salt.state       :1780][INFO    ][25152] Running state [/etc/default/cinder-scheduler] at time 14:34:01.688509
2019-05-09 14:34:01,689 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/default/cinder-scheduler]
2019-05-09 14:34:01,717 [salt.state       :300 ][INFO    ][25152] File /etc/default/cinder-scheduler is in the correct state
2019-05-09 14:34:01,717 [salt.state       :1951][INFO    ][25152] Completed state [/etc/default/cinder-scheduler] at time 14:34:01.717702 duration_in_ms=29.194
2019-05-09 14:34:01,718 [salt.state       :1780][INFO    ][25152] Running state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 14:34:01.718461
2019-05-09 14:34:01,718 [salt.state       :1813][INFO    ][25152] Executing state file.managed for [/etc/apache2/conf-available/cinder-wsgi.conf]
2019-05-09 14:34:01,867 [salt.state       :300 ][INFO    ][25152] File /etc/apache2/conf-available/cinder-wsgi.conf is in the correct state
2019-05-09 14:34:01,868 [salt.state       :1951][INFO    ][25152] Completed state [/etc/apache2/conf-available/cinder-wsgi.conf] at time 14:34:01.868489 duration_in_ms=150.026
2019-05-09 14:34:01,871 [salt.state       :1780][INFO    ][25152] Running state [cinder-wsgi] at time 14:34:01.871601
2019-05-09 14:34:01,872 [salt.state       :1813][INFO    ][25152] Executing state apache_conf.enabled for [cinder-wsgi]
2019-05-09 14:34:01,873 [salt.state       :300 ][INFO    ][25152] cinder-wsgi already enabled.
2019-05-09 14:34:01,874 [salt.state       :1951][INFO    ][25152] Completed state [cinder-wsgi] at time 14:34:01.873988 duration_in_ms=2.387
2019-05-09 14:34:01,875 [salt.state       :1780][INFO    ][25152] Running state [cinder-api] at time 14:34:01.875626
2019-05-09 14:34:01,876 [salt.state       :1813][INFO    ][25152] Executing state service.dead for [cinder-api]
2019-05-09 14:34:01,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'status', 'cinder-api.service', '-n', '0'] in directory '/root'
2019-05-09 14:34:01,910 [salt.state       :300 ][INFO    ][25152] The named service cinder-api is not available
2019-05-09 14:34:01,911 [salt.state       :1951][INFO    ][25152] Completed state [cinder-api] at time 14:34:01.911561 duration_in_ms=35.934
2019-05-09 14:34:01,920 [salt.state       :1780][INFO    ][25152] Running state [apache2] at time 14:34:01.920185
2019-05-09 14:34:01,921 [salt.state       :1813][INFO    ][25152] Executing state service.running for [apache2]
2019-05-09 14:34:01,923 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:34:01,952 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:34:01,988 [salt.state       :300 ][INFO    ][25152] The service apache2 is already running
2019-05-09 14:34:01,990 [salt.state       :1951][INFO    ][25152] Completed state [apache2] at time 14:34:01.989677 duration_in_ms=69.493
2019-05-09 14:34:01,996 [salt.state       :1780][INFO    ][25152] Running state [cinder-scheduler] at time 14:34:01.996834
2019-05-09 14:34:01,997 [salt.state       :1813][INFO    ][25152] Executing state service.running for [cinder-scheduler]
2019-05-09 14:34:01,999 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'status', 'cinder-scheduler.service', '-n', '0'] in directory '/root'
2019-05-09 14:34:02,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'is-active', 'cinder-scheduler.service'] in directory '/root'
2019-05-09 14:34:02,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['systemctl', 'is-enabled', 'cinder-scheduler.service'] in directory '/root'
2019-05-09 14:34:02,089 [salt.state       :300 ][INFO    ][25152] The service cinder-scheduler is already running
2019-05-09 14:34:02,090 [salt.state       :1951][INFO    ][25152] Completed state [cinder-scheduler] at time 14:34:02.090655 duration_in_ms=93.821
2019-05-09 14:34:02,098 [salt.state       :1780][INFO    ][25152] Running state [lvm-driver] at time 14:34:02.098881
2019-05-09 14:34:02,099 [salt.state       :1813][INFO    ][25152] Executing state cinderv3.volume_type_present for [lvm-driver]
2019-05-09 14:34:02,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command ['git', '--version'] in directory '/root'
2019-05-09 14:34:02,749 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command '/bin/false' in directory '/root'
2019-05-09 14:34:02,774 [salt.state       :300 ][INFO    ][25152] onlyif execution failed
2019-05-09 14:34:02,775 [salt.state       :1951][INFO    ][25152] Completed state [lvm-driver] at time 14:34:02.775375 duration_in_ms=676.493
2019-05-09 14:34:02,778 [salt.state       :1780][INFO    ][25152] Running state [lvm-driver] at time 14:34:02.778455
2019-05-09 14:34:02,779 [salt.state       :1813][INFO    ][25152] Executing state cinderv3.volume_type_key_present for [lvm-driver]
2019-05-09 14:34:02,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25152] Executing command '/bin/false' in directory '/root'
2019-05-09 14:34:02,819 [salt.state       :300 ][INFO    ][25152] onlyif execution failed
2019-05-09 14:34:02,820 [salt.state       :1951][INFO    ][25152] Completed state [lvm-driver] at time 14:34:02.820667 duration_in_ms=42.212
2019-05-09 14:34:02,828 [salt.minion      :1711][INFO    ][25152] Returning information for job: 20190509143350247346
2019-05-09 14:36:41,193 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509143641187818
2019-05-09 14:36:41,223 [salt.minion      :1432][INFO    ][25287] Starting a new job with PID 25287
2019-05-09 14:36:47,841 [salt.state       :915 ][INFO    ][25287] Loading fresh modules for state activity
2019-05-09 14:36:47,958 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/init.sls'
2019-05-09 14:36:48,027 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/server.sls'
2019-05-09 14:36:48,414 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/db/offline_sync.sls'
2019-05-09 14:36:48,623 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/db/plugins/midonet.sls'
2019-05-09 14:36:48,712 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/db/plugins/service/bgpvpn.sls'
2019-05-09 14:36:48,800 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/fwaas.sls'
2019-05-09 14:36:48,921 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/mysql.sls'
2019-05-09 14:36:49,103 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/rabbitmq.sls'
2019-05-09 14:36:50,529 [salt.state       :1780][INFO    ][25287] Running state [neutron-server] at time 14:36:50.529848
2019-05-09 14:36:50,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:36:50,917 [salt.state       :1780][INFO    ][25287] Running state [python-neutron-lbaas] at time 14:36:50.917489
2019-05-09 14:36:50,931 [salt.state       :1780][INFO    ][25287] Running state [gettext-base] at time 14:36:50.931962
2019-05-09 14:36:50,939 [salt.state       :1780][INFO    ][25287] Running state [python-pycadf] at time 14:36:50.939516
2019-05-09 14:36:50,947 [salt.state       :1780][INFO    ][25287] Running state [/usr/sbin/policy-rc.d] at time 14:36:50.946967
2019-05-09 14:36:50,947 [salt.state       :1813][INFO    ][25287] Executing state file.managed for [/usr/sbin/policy-rc.d]
2019-05-09 14:36:50,950 [salt.state       :300 ][INFO    ][25287] File changed:
New file
2019-05-09 14:36:50,950 [salt.state       :1951][INFO    ][25287] Completed state [/usr/sbin/policy-rc.d] at time 14:36:50.950294 duration_in_ms=3.327
2019-05-09 14:36:50,950 [salt.state       :1780][INFO    ][25287] Running state [neutron-server] at time 14:36:50.950588
2019-05-09 14:36:50,950 [salt.state       :1813][INFO    ][25287] Executing state pkg.installed for [neutron-server]
2019-05-09 14:36:50,967 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['apt-cache', '-q', 'policy', 'neutron-server'] in directory '/root'
2019-05-09 14:36:51,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:36:53,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:36:53,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'neutron-server'] in directory '/root'
2019-05-09 14:36:56,258 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509143656246988
2019-05-09 14:36:56,285 [salt.minion      :1432][INFO    ][25738] Starting a new job with PID 25738
2019-05-09 14:36:56,320 [salt.minion      :1711][INFO    ][25738] Returning information for job: 20190509143656246988
2019-05-09 14:37:07,876 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:37:07,947 [salt.state       :300 ][INFO    ][25287] Made the following changes:
'ipset-6.29' changed from 'absent' to '1'
'python-neutron' changed from 'absent' to '2:13.0.3-2~u16.04+mcp99'
'neutron-plugin' changed from 'absent' to '1'
'ipset' changed from 'absent' to '6.29-1'
'neutron-server' changed from 'absent' to '2:13.0.3-2~u16.04+mcp99'
'python-ryu' changed from 'absent' to '4.26+dfsg1-1~u16.04+mcp'
'neutron-common' changed from 'absent' to '2:13.0.3-2~u16.04+mcp99'
'python-tinyrpc' changed from 'absent' to '0.6-1~u16.04+mcp'
'python-openvswitch' changed from 'absent' to '2.10.2-1~u16.04+mcp'
'libipset3' changed from 'absent' to '6.29-1'
'python2.7-neutron' changed from 'absent' to '1'
'python2.7-ryu' changed from 'absent' to '1'
'python-ovsdbapp' changed from 'absent' to '0.12.3-2~u16.04+mcp4'
'python-sortedcontainers' changed from 'absent' to '1.4.4-1'
'neutron-plugin-ml2' changed from 'absent' to '2:13.0.3-2~u16.04+mcp99'

2019-05-09 14:37:08,027 [salt.state       :915 ][INFO    ][25287] Loading fresh modules for state activity
2019-05-09 14:37:08,107 [salt.state       :1951][INFO    ][25287] Completed state [neutron-server] at time 14:37:08.107360 duration_in_ms=17156.771
2019-05-09 14:37:08,112 [salt.state       :1780][INFO    ][25287] Running state [python-neutron-lbaas] at time 14:37:08.112725
2019-05-09 14:37:08,113 [salt.state       :1813][INFO    ][25287] Executing state pkg.installed for [python-neutron-lbaas]
2019-05-09 14:37:08,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:37:09,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-neutron-lbaas'] in directory '/root'
2019-05-09 14:37:12,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:37:12,815 [salt.state       :300 ][INFO    ][25287] Made the following changes:
'python-neutron-lbaas' changed from 'absent' to '2:13.0.0-2~u16.04+mcp8'

2019-05-09 14:37:12,840 [salt.state       :915 ][INFO    ][25287] Loading fresh modules for state activity
2019-05-09 14:37:12,980 [salt.state       :1951][INFO    ][25287] Completed state [python-neutron-lbaas] at time 14:37:12.980211 duration_in_ms=4867.486
2019-05-09 14:37:12,985 [salt.state       :1780][INFO    ][25287] Running state [gettext-base] at time 14:37:12.985047
2019-05-09 14:37:12,985 [salt.state       :1813][INFO    ][25287] Executing state pkg.installed for [gettext-base]
2019-05-09 14:37:13,781 [salt.state       :300 ][INFO    ][25287] All specified packages are already installed
2019-05-09 14:37:13,781 [salt.state       :1951][INFO    ][25287] Completed state [gettext-base] at time 14:37:13.781810 duration_in_ms=796.76
2019-05-09 14:37:13,782 [salt.state       :1780][INFO    ][25287] Running state [python-pycadf] at time 14:37:13.782295
2019-05-09 14:37:13,782 [salt.state       :1813][INFO    ][25287] Executing state pkg.installed for [python-pycadf]
2019-05-09 14:37:13,790 [salt.state       :300 ][INFO    ][25287] All specified packages are already installed
2019-05-09 14:37:13,790 [salt.state       :1951][INFO    ][25287] Completed state [python-pycadf] at time 14:37:13.790762 duration_in_ms=8.467
2019-05-09 14:37:13,790 [salt.state       :1780][INFO    ][25287] Running state [neutron-plugin-ml2] at time 14:37:13.790955
2019-05-09 14:37:13,791 [salt.state       :1813][INFO    ][25287] Executing state pkg.installed for [neutron-plugin-ml2]
2019-05-09 14:37:13,798 [salt.state       :300 ][INFO    ][25287] All specified packages are already installed
2019-05-09 14:37:13,798 [salt.state       :1951][INFO    ][25287] Completed state [neutron-plugin-ml2] at time 14:37:13.798752 duration_in_ms=7.798
2019-05-09 14:37:13,800 [salt.state       :1780][INFO    ][25287] Running state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 14:37:13.800623
2019-05-09 14:37:13,800 [salt.state       :1813][INFO    ][25287] Executing state file.managed for [/etc/neutron/plugins/ml2/ml2_conf.ini]
2019-05-09 14:37:13,830 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/ml2_conf.ini'
2019-05-09 14:37:14,121 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/_ml2_conf.vpp.ini'
2019-05-09 14:37:14,136 [salt.state       :300 ][INFO    ][25287] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-
 #
 # From oslo.log
 #
@@ -114,6 +114,7 @@
 #fatal_deprecations = false
 
 
+
 [l2pop]
 
 #
@@ -122,7 +123,7 @@
 
 # Delay within which agent is expected to update existing ports when it
 # restarts (integer value)
-#agent_boot_time = 180
+agent_boot_time = 180
 
 
 [ml2]
@@ -138,28 +139,31 @@
 # Ordered list of network_types to allocate as tenant networks. The default
 # value 'local' is useful for single-box testing but provides no connectivity
 # between hosts. (list value)
-#tenant_network_types = local
+tenant_network_types = flat,vlan
 
 # An ordered list of networking mechanism driver entrypoints to be loaded from
 # the neutron.ml2.mechanism_drivers namespace. (list value)
-#mechanism_drivers =
+mechanism_drivers = openvswitch
 
 # An ordered list of extension driver entrypoints to be loaded from the
 # neutron.ml2.extension_drivers namespace. For example: extension_drivers =
 # port_security,qos (list value)
 #extension_drivers =
 
+
+extension_drivers = port_security
+
 # Maximum size of an IP packet (MTU) that can traverse the underlying physical
 # network infrastructure without fragmentation when using an overlay/tunnel
 # protocol. This option allows specifying a physical network MTU value that
 # differs from the default global_physnet_mtu value. (integer value)
-#path_mtu = 0
+path_mtu = 1500
 
 # A list of mappings of physical networks to MTU values. The format of the
 # mapping is <physnet>:<mtu val>. This mapping allows specifying a physical
 # network MTU value that differs from the default global_physnet_mtu value.
 # (list value)
-#physical_network_mtus =
+physical_network_mtus = physnet1:1500,physnet2:1500
 
 # Default network type for external networks when no provider attributes are
 # specified. By default it is None, which means that if provider attributes are
@@ -183,7 +187,7 @@
 # List of physical_network names with which flat networks can be created. Use
 # default '*' to allow flat networks with arbitrary physical_network names. Use
 # an empty list to disable flat networks. (list value)
-#flat_networks = *
+flat_networks = *
 
 
 [ml2_type_geneve]
@@ -194,14 +198,14 @@
 
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # Geneve VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
+vni_ranges = 1:65536
 
 # Geneve encapsulation header size is dynamic, this value is used to calculate
 # the maximum MTU for the driver. This is the sum of the sizes of the outer ETH
 # + IP + UDP + GENEVE header sizes. The default size for this field is 50,
 # which is the size of the Geneve header without any additional option headers.
 # (integer value)
-#max_header_size = 30
+max_header_size = 38
 
 
 [ml2_type_gre]
@@ -212,7 +216,7 @@
 
 # Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE
 # tunnel IDs that are available for tenant network allocation (list value)
-#tunnel_id_ranges =
+tunnel_id_ranges = 2:65535
 
 
 [ml2_type_vlan]
@@ -225,7 +229,7 @@
 # specifying physical_network names usable for VLAN provider and tenant
 # networks, as well as ranges of VLAN tags on each available for allocation to
 # tenant networks. (list value)
-#network_vlan_ranges =
+network_vlan_ranges = physnet2:1000:1030
 
 
 [ml2_type_vxlan]
@@ -236,12 +240,12 @@
 
 # Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
 # VXLAN VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
+vni_ranges = 2:65535
 
 # Multicast group for VXLAN. When configured, will enable sending all broadcast
 # traffic to this multicast group. When left unconfigured, will disable
 # multicast VXLAN mode. (string value)
-#vxlan_group = <None>
+vxlan_group = 224.0.0.1
 
 
 [securitygroup]
@@ -251,12 +255,12 @@
 #
 
 # Driver for security groups firewall in the L2 agent (string value)
-#firewall_driver = <None>
+firewall_driver = openvswitch
 
 # Controls whether the neutron security group API is enabled in the server. It
 # should be false when using no security groups or using the nova security
 # group API. (boolean value)
-#enable_security_group = true
+enable_security_group = True
 
 # Use ipset to speed-up the iptables based security groups. Enabling ipset
 # support requires that ipset is installed on L2 agent node. (boolean value)

2019-05-09 14:37:14,136 [salt.state       :1951][INFO    ][25287] Completed state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 14:37:14.136945 duration_in_ms=336.322
2019-05-09 14:37:14,138 [salt.state       :1780][INFO    ][25287] Running state [neutron_ssl_mysql] at time 14:37:14.138805
2019-05-09 14:37:14,139 [salt.state       :1813][INFO    ][25287] Executing state test.show_notification for [neutron_ssl_mysql]
2019-05-09 14:37:14,139 [salt.state       :300 ][INFO    ][25287] Running neutron._ssl.mysql
2019-05-09 14:37:14,139 [salt.state       :1951][INFO    ][25287] Completed state [neutron_ssl_mysql] at time 14:37:14.139387 duration_in_ms=0.583
2019-05-09 14:37:14,139 [salt.state       :1780][INFO    ][25287] Running state [neutron_server_ssl_rabbitmq] at time 14:37:14.139673
2019-05-09 14:37:14,139 [salt.state       :1813][INFO    ][25287] Executing state test.show_notification for [neutron_server_ssl_rabbitmq]
2019-05-09 14:37:14,140 [salt.state       :300 ][INFO    ][25287] Running neutron._ssl.rabbitmq
2019-05-09 14:37:14,140 [salt.state       :1951][INFO    ][25287] Completed state [neutron_server_ssl_rabbitmq] at time 14:37:14.140219 duration_in_ms=0.547
2019-05-09 14:37:14,140 [salt.state       :1780][INFO    ][25287] Running state [/etc/neutron/neutron.conf] at time 14:37:14.140661
2019-05-09 14:37:14,140 [salt.state       :1813][INFO    ][25287] Executing state file.managed for [/etc/neutron/neutron.conf]
2019-05-09 14:37:14,163 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/neutron-server.conf'
2019-05-09 14:37:14,548 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/service/_wsgi_default.conf'
2019-05-09 14:37:14,753 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_concurrency.conf'
2019-05-09 14:37:14,889 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/service/_ssl.conf'
2019-05-09 14:37:14,914 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/bgpvpn.conf'
2019-05-09 14:37:14,955 [salt.state       :300 ][INFO    ][25287] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-core_plugin = ml2
 
 #
 # From neutron
@@ -10,28 +10,19 @@
 #state_path = /var/lib/neutron
 
 # The host IP to bind to. (host address value)
-#bind_host = 0.0.0.0
+bind_host = 192.168.10.37
 
 # The port to bind to (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#bind_port = 9696
-
-# The path for API extensions. Note that this can be a colon-separated list of
-# paths. For example: api_extensions_path =
-# extensions:/path/to/more/exts:/even/more/exts. The __path__ of
-# neutron.extensions is appended to this, so if your extensions are in there
-# you don't need to specify them here. (string value)
-#api_extensions_path =
+bind_port = 9696
+# The core plugin Neutron will use (string value)
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
+# The service plugins Neutron will use (list value)
+service_plugins = neutron.services.l3_router.l3_router_plugin.L3RouterPlugin,metering,trunk
 
 # The type of authentication to use (string value)
 #auth_strategy = keystone
-
-# The core plugin Neutron will use (string value)
-#core_plugin = <None>
-
-# The service plugins Neutron will use (list value)
-#service_plugins =
 
 # The base MAC address Neutron will use for VIFs. The first 3 octets will
 # remain unchanged. If the 4th octet is not 00, it will also be used. The
@@ -43,7 +34,7 @@
 
 # The maximum number of items returned in a single response, value was
 # 'infinite' or negative integer means no limit (string value)
-#pagination_max_limit = -1
+pagination_max_limit = -1
 
 # Default value of availability zone hints. The availability zone aware
 # schedulers use this when the resources availability_zone_hints is empty.
@@ -69,10 +60,10 @@
 
 # DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
 # lease times. (integer value)
-#dhcp_lease_duration = 86400
+dhcp_lease_duration = 600
 
 # Domain to use for building the hostnames (string value)
-#dns_domain = openstacklocal
+dns_domain = novalocal
 
 # Driver for external DNS integration. (string value)
 #external_dns_driver = <None>
@@ -83,7 +74,7 @@
 # Allow overlapping IP support in Neutron. Attention: the following parameter
 # MUST be set to False if Neutron is being used in conjunction with Nova
 # security groups. (boolean value)
-#allow_overlapping_ips = false
+allow_overlapping_ips = true
 
 # Hostname to be used by the Neutron server, agents and services running on
 # this machine. All the agents and services running on this machine must use
@@ -96,11 +87,11 @@
 #network_link_prefix = <None>
 
 # Send notification to nova when port status changes (boolean value)
-#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = true
 
 # Send notification to nova when port data (fixed_ips/floatingip) changes so
 # nova can update its cache. (boolean value)
-#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = true
 
 # Number of seconds between sending events to nova if there are any events to
 # send. (integer value)
@@ -125,7 +116,7 @@
 # neutron automatically subtracts the overlay protocol overhead from this
 # value. Defaults to 1500, the standard value for Ethernet. (integer value)
 # Deprecated group/name - [ml2]/segment_mtu
-#global_physnet_mtu = 1500
+global_physnet_mtu = 1500
 
 # Number of backlog requests to configure the socket with (integer value)
 #backlog = 4096
@@ -145,11 +136,11 @@
 #api_workers = <None>
 
 # Number of RPC worker processes for service. (integer value)
-#rpc_workers = 1
+rpc_workers = 4
 
 # Number of RPC worker processes dedicated to state reports queue. (integer
 # value)
-#rpc_state_report_workers = 1
+rpc_state_report_workers = 4
 
 # Range of seconds to randomly delay when starting the periodic task scheduler
 # to reduce stampeding. (Disable by setting to 0) (integer value)
@@ -179,7 +170,7 @@
 
 # Seconds to regard the agent is down; should be at least twice
 # report_interval, to be sure the agent is down for good. (integer value)
-#agent_down_time = 75
+agent_down_time = 300
 
 # Representing the resource type whose load is being reported by the agent.
 # This can be "networks", "subnets" or "ports". When specified (Default is
@@ -222,7 +213,7 @@
 # greater than 1, the scheduler automatically assigns multiple DHCP agents for
 # a given tenant network, providing high availability for DHCP service.
 # (integer value)
-#dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
 
 # Enable services on an agent with admin_state_up False. If this option is
 # False, when admin_state_up of an agent is turned False, services on it will
@@ -241,28 +232,28 @@
 
 # System-wide flag to determine the type of router that tenants can create.
 # Only admin can override. (boolean value)
-#router_distributed = false
+router_distributed = False
 
 # Determine if setup is configured for DVR. If False, DVR API extension will be
 # disabled. (boolean value)
-#enable_dvr = true
+enable_dvr = False
 
 # Driver to use for scheduling router to a default L3 agent (string value)
-#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
 
 # Allow auto scheduling of routers to L3 agent. (boolean value)
 #router_auto_schedule = true
 
 # Automatically reschedule routers from offline L3 agents to online L3 agents.
 # (boolean value)
-#allow_automatic_l3agent_failover = false
+allow_automatic_l3agent_failover = true
 
 # Enable HA mode for virtual routers. (boolean value)
-#l3_ha = false
+l3_ha = False
 
 # Maximum number of L3 agents which a HA router will be scheduled on. If it is
 # set to 0 then the router will be scheduled on every agent. (integer value)
-#max_l3_agents_per_router = 3
+max_l3_agents_per_router = 0
 
 # Subnet used for the l3 HA admin network. (string value)
 #l3_ha_net_cidr = 169.254.192.0/18
@@ -283,7 +274,6 @@
 
 # Maximum number of allowed address pairs (integer value)
 #max_allowed_address_pair = 10
-
 #
 # From oslo.log
 #
@@ -447,6 +437,7 @@
 # exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
+
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
@@ -574,6 +565,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -584,8 +576,7 @@
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = neutron
-
+#control_exchange = keystone
 #
 # From oslo.service.wsgi
 #
@@ -621,7 +612,6 @@
 
 
 [agent]
-root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf"
 
 #
 # From neutron.agent
@@ -631,7 +621,7 @@
 # /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
 # 'sudo' to skip the filtering and just run the command directly. (string
 # value)
-#root_helper = sudo
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 # Use the root helper when listing the namespaces on a system. This may not be
 # required depending on the security configuration. If the root helper is not
@@ -656,7 +646,7 @@
 # Seconds between nodes reporting state to server; should be less than
 # agent_down_time, best if it is half or less than agent_down_time. (floating
 # point value)
-#report_interval = 30
+report_interval = 30
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
@@ -688,9 +678,8 @@
 
 
 [cors]
-
-#
-# From oslo.middleware.cors
+#
+# From oslo.middleware
 #
 
 # Indicate whether this resource may be shared with the domain received in the
@@ -703,7 +692,7 @@
 
 # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
 # Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
+#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
 
 # Maximum cache age of CORS preflight requests. (integer value)
 #max_age = 3600
@@ -713,20 +702,11 @@
 
 # Indicate which header field names may be used during the actual request.
 # (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
+#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token,X-Project-Id,X-Project-Name,X-Project-Domain-Id,X-Project-Domain-Name,X-Domain-Id,X-Domain-Name
+
 
 
 [database]
-connection = sqlite:////var/lib/neutron/neutron.sqlite
-
-#
-# From neutron.db
-#
-
-# Database engine for which script will be generated when using offline
-# migration. (string value)
-#engine =
-
 #
 # From oslo.db
 #
@@ -744,9 +724,9 @@
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://neutron:opnfv_secret@192.168.10.23/neutron?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
 # The SQL mode to be used for MySQL sessions. This option, including the
@@ -768,6 +748,7 @@
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
+connection_recycle_time = 300
 
 # DEPRECATED: Minimum number of SQL connections to keep open in a pool.
 # (integer value)
@@ -784,12 +765,14 @@
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
+max_pool_size = 10
 
 # Maximum number of database connection retries during startup. Set to -1 to
 # specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
+max_retries = -1
 
 # Interval between retries of opening a SQL connection. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
@@ -800,6 +783,7 @@
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
+max_overflow = 30
 
 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
 # value)
@@ -840,8 +824,8 @@
 #connection_parameters =
 
 
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -856,6 +840,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -871,6 +856,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -908,6 +894,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -921,36 +908,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -1028,66 +985,15 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[nova]
-
-#
-# From neutron
-#
 
 # Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # Type of the nova endpoint to use.  This endpoint will be looked up in the
 # keystone catalog and should be one of public, internal or admin. (string
@@ -1097,35 +1003,35 @@
 # admin - <No description provided>
 # internal - <No description provided>
 #endpoint_type = public
-
-#
-# From nova.auth
-#
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
 
 # Authentication type to load (string value)
 # Deprecated group/name - [nova]/auth_plugin
 #auth_type = <None>
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
 #cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
 
 # Optional domain ID to use with v3 and v2 parameters. It will be used for both
 # the user and project domain in v3 and ignored in v2 authentication. (string
 # value)
 #default_domain_id = <None>
 
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
 # (string value)
 #default_domain_name = <None>
 
@@ -1138,28 +1044,26 @@
 # Verify HTTPS connections. (boolean value)
 #insecure = false
 
-# PEM encoded client certificate key file (string value)
+# Required if identity server requires client certificate (string value)
 #keyfile = <None>
 
 # User's password (string value)
 #password = <None>
+password = opnfv_secret
 
 # Domain ID containing project (string value)
 #project_domain_id = <None>
+project_domain_id = default
 
 # Domain name containing project (string value)
 #project_domain_name = <None>
 
 # Project ID to scope to (string value)
-# Deprecated group/name - [nova]/tenant_id
 #project_id = <None>
 
 # Project name to scope to (string value)
-# Deprecated group/name - [nova]/tenant_name
 #project_name = <None>
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
@@ -1178,347 +1082,190 @@
 
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User id (string value)
+# User ID (string value)
 #user_id = <None>
 
 # Username (string value)
-# Deprecated group/name - [nova]/user_name
+# Deprecated group/name - [neutron]/user_name
 #username = <None>
-
-
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
+username = neutron
+
+
+[matchmaker_redis]
 
 #
 # From oslo.messaging
 #
 
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
+# DEPRECATED: Host to locate redis. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
+#host = 127.0.0.1
+
+# DEPRECATED: Use this port to connect to redis host. (port value)
 # Minimum value: 0
 # Maximum value: 65535
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
+#port = 6379
+
+# DEPRECATED: Password for Redis server (optional). (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
+# Reason: Replaced by [DEFAULT]/transport_url
+#password =
+
+# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
+# [host:port, host1:port ... ] (list value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
+# Reason: Replaced by [DEFAULT]/transport_url
+#sentinel_hosts =
+
+# Redis replica set name. (string value)
+#sentinel_group_name = oslo-messaging-zeromq
+
+# Time in ms to wait between connection attempts. (integer value)
+#wait_timeout = 2000
+
+# Time in ms to wait before the transaction is killed. (integer value)
+#check_timeout = 20000
+
+# Timeout in ms on blocking socket operations. (integer value)
+#socket_timeout = 10000
+
+
+[nova]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:5000
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = nova
+
+
+[oslo_concurrency]
+#
+# From oslo.concurrency
+#
+
+# Enables or disables inter-process locks. (boolean value)
+#disable_process_locking = false
+
+# Directory to use for lock files.  For security, the specified
+# directory should only be writable by the user running the processes
+# that need locking. Defaults to environment variable OSLO_LOCK_PATH.
+# If OSLO_LOCK_PATH is not set in the environment, use the Python
+# tempfile.gettempdir function to find a suitable location. If
+# external locks are used, a lock path must be set. (string value)
+#lock_path = /tmp
+lock_path = /var/lock/neutron
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
@@ -1534,24 +1281,6 @@
 # Connect over SSL. (boolean value)
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
@@ -1666,213 +1395,59 @@
 #heartbeat_rate = 2
 
 
-[oslo_messaging_zmq]
-
+
+[oslo_messaging_notifications]
 #
 # From oslo.messaging
 #
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
 # (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
+#retry = -1
 
 
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
 
 
 [oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
 
 
 [quotas]
@@ -1927,7 +1502,6 @@
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
@@ -1952,3 +1526,19 @@
 # Sets the list of available ciphers. value should be a string in the OpenSSL
 # cipher list format. (string value)
 #ciphers = <None>
+
+
+[ovs]
+
+#
+# Advanced services configs
+#
+
+
+
+# BGPVPN config
+
+[service_providers]
+
+
+

2019-05-09 14:37:14,958 [salt.state       :1951][INFO    ][25287] Completed state [/etc/neutron/neutron.conf] at time 14:37:14.958142 duration_in_ms=817.478
2019-05-09 14:37:14,960 [salt.state       :1780][INFO    ][25287] Running state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 14:37:14.960545
2019-05-09 14:37:14,961 [salt.state       :1813][INFO    ][25287] Executing state cmd.run for [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head]
2019-05-09 14:37:14,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command '/bin/false' in directory '/root'
2019-05-09 14:37:14,992 [salt.state       :300 ][INFO    ][25287] onlyif execution failed
2019-05-09 14:37:14,993 [salt.state       :1951][INFO    ][25287] Completed state [neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini upgrade head] at time 14:37:14.993774 duration_in_ms=33.229
2019-05-09 14:37:14,995 [salt.state       :1780][INFO    ][25287] Running state [neutron-db-manage --subproject networking-midonet upgrade head] at time 14:37:14.995848
2019-05-09 14:37:14,996 [salt.state       :1813][INFO    ][25287] Executing state cmd.run for [neutron-db-manage --subproject networking-midonet upgrade head]
2019-05-09 14:37:14,998 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command '/bin/false' in directory '/root'
2019-05-09 14:37:15,027 [salt.state       :300 ][INFO    ][25287] onlyif execution failed
2019-05-09 14:37:15,028 [salt.state       :1951][INFO    ][25287] Completed state [neutron-db-manage --subproject networking-midonet upgrade head] at time 14:37:15.028437 duration_in_ms=32.589
2019-05-09 14:37:15,030 [salt.state       :1780][INFO    ][25287] Running state [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head] at time 14:37:15.030051
2019-05-09 14:37:15,031 [salt.state       :1813][INFO    ][25287] Executing state cmd.run for [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head]
2019-05-09 14:37:15,033 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command '/bin/false' in directory '/root'
2019-05-09 14:37:15,064 [salt.state       :300 ][INFO    ][25287] onlyif execution failed
2019-05-09 14:37:15,065 [salt.state       :1951][INFO    ][25287] Completed state [neutron-db-manage --config-file /etc/neutron/neutron.conf --subproject networking-bgpvpn upgrade head] at time 14:37:15.065533 duration_in_ms=35.483
2019-05-09 14:37:15,067 [salt.state       :1780][INFO    ][25287] Running state [/usr/sbin/policy-rc.d] at time 14:37:15.067713
2019-05-09 14:37:15,068 [salt.state       :1813][INFO    ][25287] Executing state file.absent for [/usr/sbin/policy-rc.d]
2019-05-09 14:37:15,070 [salt.state       :300 ][INFO    ][25287] {'removed': '/usr/sbin/policy-rc.d'}
2019-05-09 14:37:15,071 [salt.state       :1951][INFO    ][25287] Completed state [/usr/sbin/policy-rc.d] at time 14:37:15.070925 duration_in_ms=3.212
2019-05-09 14:37:15,072 [salt.state       :1780][INFO    ][25287] Running state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 14:37:15.072545
2019-05-09 14:37:15,073 [salt.state       :1813][INFO    ][25287] Executing state cmd.run for [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini]
2019-05-09 14:37:15,074 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command 'test -e /etc/neutron/plugin.ini' in directory '/root'
2019-05-09 14:37:15,101 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command 'ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini' in directory '/root'
2019-05-09 14:37:15,113 [salt.state       :300 ][INFO    ][25287] {'pid': 26525, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-05-09 14:37:15,113 [salt.state       :1951][INFO    ][25287] Completed state [ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini] at time 14:37:15.113828 duration_in_ms=41.285
2019-05-09 14:37:15,114 [salt.state       :1780][INFO    ][25287] Running state [/etc/neutron/api-paste.ini] at time 14:37:15.114869
2019-05-09 14:37:15,115 [salt.state       :1813][INFO    ][25287] Executing state file.managed for [/etc/neutron/api-paste.ini]
2019-05-09 14:37:15,143 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/api-paste.ini'
2019-05-09 14:37:15,248 [salt.state       :300 ][INFO    ][25287] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [composite:neutron]
 use = egg:Paste#urlmap
 /: neutronversions_composite

2019-05-09 14:37:15,248 [salt.state       :1951][INFO    ][25287] Completed state [/etc/neutron/api-paste.ini] at time 14:37:15.248228 duration_in_ms=133.358
2019-05-09 14:37:15,248 [salt.state       :1780][INFO    ][25287] Running state [/etc/default/neutron-server] at time 14:37:15.248714
2019-05-09 14:37:15,249 [salt.state       :1813][INFO    ][25287] Executing state file.managed for [/etc/default/neutron-server]
2019-05-09 14:37:15,269 [salt.fileclient  :1219][INFO    ][25287] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/neutron-server'
2019-05-09 14:37:15,346 [salt.state       :300 ][INFO    ][25287] File changed:
--- 
+++ 
@@ -1,5 +1,8 @@
+# Generated by Salt.
+
 # defaults for neutron-server
 
 # path to config file corresponding to the core_plugin specified in
 # neutron.conf
+#NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini"
 NEUTRON_PLUGIN_CONFIG="/etc/neutron/plugins/ml2/ml2_conf.ini"

2019-05-09 14:37:15,347 [salt.state       :1951][INFO    ][25287] Completed state [/etc/default/neutron-server] at time 14:37:15.347271 duration_in_ms=98.556
2019-05-09 14:37:15,348 [salt.state       :1780][INFO    ][25287] Running state [neutron-server] at time 14:37:15.348699
2019-05-09 14:37:15,348 [salt.state       :1813][INFO    ][25287] Executing state service.running for [neutron-server]
2019-05-09 14:37:15,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemctl', 'status', 'neutron-server.service', '-n', '0'] in directory '/root'
2019-05-09 14:37:15,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2019-05-09 14:37:15,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2019-05-09 14:37:15,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'neutron-server.service'] in directory '/root'
2019-05-09 14:37:15,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemctl', 'is-active', 'neutron-server.service'] in directory '/root'
2019-05-09 14:37:15,470 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2019-05-09 14:37:15,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][25287] Executing command ['systemctl', 'is-enabled', 'neutron-server.service'] in directory '/root'
2019-05-09 14:37:15,535 [salt.state       :300 ][INFO    ][25287] {'neutron-server': True}
2019-05-09 14:37:15,536 [salt.state       :1951][INFO    ][25287] Completed state [neutron-server] at time 14:37:15.536590 duration_in_ms=187.889
2019-05-09 14:37:15,542 [salt.minion      :1711][INFO    ][25287] Returning information for job: 20190509143641187818
2019-05-09 14:40:32,798 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command state.sls with jid 20190509144032791368
2019-05-09 14:40:32,827 [salt.minion      :1432][INFO    ][26603] Starting a new job with PID 26603
2019-05-09 14:40:39,423 [salt.state       :915 ][INFO    ][26603] Loading fresh modules for state activity
2019-05-09 14:40:39,542 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'barbican/init.sls'
2019-05-09 14:40:39,600 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'barbican/server.sls'
2019-05-09 14:40:40,520 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'barbican/_ssl/mysql.sls'
2019-05-09 14:40:40,639 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'barbican/_ssl/rabbitmq.sls'
2019-05-09 14:40:40,758 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'barbican/db/offline_sync.sls'
2019-05-09 14:40:42,365 [salt.state       :1780][INFO    ][26603] Running state [apache2] at time 14:40:42.365819
2019-05-09 14:40:42,366 [salt.state       :1813][INFO    ][26603] Executing state pkg.installed for [apache2]
2019-05-09 14:40:42,367 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:40:42,717 [salt.state       :300 ][INFO    ][26603] All specified packages are already installed
2019-05-09 14:40:42,718 [salt.state       :1951][INFO    ][26603] Completed state [apache2] at time 14:40:42.718287 duration_in_ms=352.468
2019-05-09 14:40:42,718 [salt.state       :1780][INFO    ][26603] Running state [openssl] at time 14:40:42.718645
2019-05-09 14:40:42,719 [salt.state       :1813][INFO    ][26603] Executing state pkg.installed for [openssl]
2019-05-09 14:40:42,727 [salt.state       :300 ][INFO    ][26603] All specified packages are already installed
2019-05-09 14:40:42,728 [salt.state       :1951][INFO    ][26603] Completed state [openssl] at time 14:40:42.728073 duration_in_ms=9.428
2019-05-09 14:40:42,728 [salt.state       :1780][INFO    ][26603] Running state [a2enmod ssl] at time 14:40:42.728758
2019-05-09 14:40:42,729 [salt.state       :1813][INFO    ][26603] Executing state cmd.run for [a2enmod ssl]
2019-05-09 14:40:42,729 [salt.state       :300 ][INFO    ][26603] /etc/apache2/mods-enabled/ssl.load exists
2019-05-09 14:40:42,729 [salt.state       :1951][INFO    ][26603] Completed state [a2enmod ssl] at time 14:40:42.729670 duration_in_ms=0.91
2019-05-09 14:40:42,730 [salt.state       :1780][INFO    ][26603] Running state [a2enmod rewrite] at time 14:40:42.730324
2019-05-09 14:40:42,730 [salt.state       :1813][INFO    ][26603] Executing state cmd.run for [a2enmod rewrite]
2019-05-09 14:40:42,731 [salt.state       :300 ][INFO    ][26603] /etc/apache2/mods-enabled/rewrite.load exists
2019-05-09 14:40:42,731 [salt.state       :1951][INFO    ][26603] Completed state [a2enmod rewrite] at time 14:40:42.731223 duration_in_ms=0.899
2019-05-09 14:40:42,731 [salt.state       :1780][INFO    ][26603] Running state [libapache2-mod-wsgi] at time 14:40:42.731799
2019-05-09 14:40:42,732 [salt.state       :1813][INFO    ][26603] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-05-09 14:40:42,739 [salt.state       :300 ][INFO    ][26603] All specified packages are already installed
2019-05-09 14:40:42,739 [salt.state       :1951][INFO    ][26603] Completed state [libapache2-mod-wsgi] at time 14:40:42.739606 duration_in_ms=7.806
2019-05-09 14:40:42,740 [salt.state       :1780][INFO    ][26603] Running state [a2enmod wsgi] at time 14:40:42.740779
2019-05-09 14:40:42,741 [salt.state       :1813][INFO    ][26603] Executing state cmd.run for [a2enmod wsgi]
2019-05-09 14:40:42,741 [salt.state       :300 ][INFO    ][26603] /etc/apache2/mods-enabled/wsgi.load exists
2019-05-09 14:40:42,741 [salt.state       :1951][INFO    ][26603] Completed state [a2enmod wsgi] at time 14:40:42.741644 duration_in_ms=0.865
2019-05-09 14:40:42,742 [salt.state       :1780][INFO    ][26603] Running state [a2enmod status -q] at time 14:40:42.742238
2019-05-09 14:40:42,742 [salt.state       :1813][INFO    ][26603] Executing state cmd.run for [a2enmod status -q]
2019-05-09 14:40:42,742 [salt.state       :300 ][INFO    ][26603] /etc/apache2/mods-enabled/status.load exists
2019-05-09 14:40:42,743 [salt.state       :1951][INFO    ][26603] Completed state [a2enmod status -q] at time 14:40:42.743112 duration_in_ms=0.873
2019-05-09 14:40:42,745 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:40:42.745448
2019-05-09 14:40:42,745 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.load]
2019-05-09 14:40:42,746 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/mods-enabled/mpm_prefork.load is not present
2019-05-09 14:40:42,746 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/mods-enabled/mpm_prefork.load] at time 14:40:42.746326 duration_in_ms=0.878
2019-05-09 14:40:42,746 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:40:42.746609
2019-05-09 14:40:42,746 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_prefork.conf]
2019-05-09 14:40:42,747 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/mods-enabled/mpm_prefork.conf is not present
2019-05-09 14:40:42,747 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/mods-enabled/mpm_prefork.conf] at time 14:40:42.747441 duration_in_ms=0.832
2019-05-09 14:40:42,747 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:40:42.747710
2019-05-09 14:40:42,748 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-05-09 14:40:42,748 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-05-09 14:40:42,748 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 14:40:42.748625 duration_in_ms=0.915
2019-05-09 14:40:42,748 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:40:42.748892
2019-05-09 14:40:42,749 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-05-09 14:40:42,749 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-05-09 14:40:42,749 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 14:40:42.749726 duration_in_ms=0.835
2019-05-09 14:40:42,751 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/mods-available/mpm_event.conf] at time 14:40:42.751836
2019-05-09 14:40:42,752 [salt.state       :1813][INFO    ][26603] Executing state file.managed for [/etc/apache2/mods-available/mpm_event.conf]
2019-05-09 14:40:42,816 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/mods-available/mpm_event.conf is in the correct state
2019-05-09 14:40:42,816 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/mods-available/mpm_event.conf] at time 14:40:42.816825 duration_in_ms=64.988
2019-05-09 14:40:42,817 [salt.state       :1780][INFO    ][26603] Running state [a2enmod mpm_event] at time 14:40:42.817782
2019-05-09 14:40:42,818 [salt.state       :1813][INFO    ][26603] Executing state cmd.run for [a2enmod mpm_event]
2019-05-09 14:40:42,818 [salt.state       :300 ][INFO    ][26603] /etc/apache2/mods-enabled/mpm_event.load exists
2019-05-09 14:40:42,818 [salt.state       :1951][INFO    ][26603] Completed state [a2enmod mpm_event] at time 14:40:42.818677 duration_in_ms=0.895
2019-05-09 14:40:42,819 [salt.state       :1780][INFO    ][26603] Running state [apache_server_service_task] at time 14:40:42.819458
2019-05-09 14:40:42,819 [salt.state       :1813][INFO    ][26603] Executing state test.show_notification for [apache_server_service_task]
2019-05-09 14:40:42,820 [salt.state       :300 ][INFO    ][26603] Running apache.server.service
2019-05-09 14:40:42,820 [salt.state       :1951][INFO    ][26603] Completed state [apache_server_service_task] at time 14:40:42.820221 duration_in_ms=0.763
2019-05-09 14:40:42,820 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/ports.conf] at time 14:40:42.820823
2019-05-09 14:40:42,821 [salt.state       :1813][INFO    ][26603] Executing state file.managed for [/etc/apache2/ports.conf]
2019-05-09 14:40:42,878 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/ports.conf is in the correct state
2019-05-09 14:40:42,878 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/ports.conf] at time 14:40:42.878711 duration_in_ms=57.888
2019-05-09 14:40:42,879 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/conf-available/security.conf] at time 14:40:42.879318
2019-05-09 14:40:42,879 [salt.state       :1813][INFO    ][26603] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-05-09 14:40:42,939 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/conf-available/security.conf is in the correct state
2019-05-09 14:40:42,940 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/conf-available/security.conf] at time 14:40:42.940081 duration_in_ms=60.761
2019-05-09 14:40:42,949 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 14:40:42.949090
2019-05-09 14:40:42,949 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-05-09 14:40:42,949 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-05-09 14:40:42,949 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 14:40:42.949915 duration_in_ms=0.823
2019-05-09 14:40:42,950 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:40:42.950553
2019-05-09 14:40:42,950 [salt.state       :1813][INFO    ][26603] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-05-09 14:40:43,186 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/sites-available/wsgi_barbican_admin.conf is in the correct state
2019-05-09 14:40:43,186 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:40:43.186718 duration_in_ms=236.163
2019-05-09 14:40:43,188 [salt.state       :1780][INFO    ][26603] Running state [barbican-api] at time 14:40:43.188647
2019-05-09 14:40:43,189 [salt.state       :1813][INFO    ][26603] Executing state pkg.installed for [barbican-api]
2019-05-09 14:40:43,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['apt-cache', '-q', 'policy', 'barbican-api'] in directory '/root'
2019-05-09 14:40:43,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-05-09 14:40:46,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:40:46,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-api'] in directory '/root'
2019-05-09 14:40:47,829 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509144047820997
2019-05-09 14:40:47,859 [salt.minion      :1432][INFO    ][27062] Starting a new job with PID 27062
2019-05-09 14:40:47,888 [salt.minion      :1711][INFO    ][27062] Returning information for job: 20190509144047820997
2019-05-09 14:40:51,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:40:51,978 [salt.state       :300 ][INFO    ][26603] Made the following changes:
'python-barbican' changed from 'absent' to '1:7.0.0-1~u16.04+mcp28'
'barbican-api' changed from 'absent' to '1:7.0.0-1~u16.04+mcp28'
'barbican-common' changed from 'absent' to '1:7.0.0-1~u16.04+mcp28'

2019-05-09 14:40:52,067 [salt.state       :915 ][INFO    ][26603] Loading fresh modules for state activity
2019-05-09 14:40:52,172 [salt.state       :1951][INFO    ][26603] Completed state [barbican-api] at time 14:40:52.171899 duration_in_ms=8983.25
2019-05-09 14:40:52,186 [salt.state       :1780][INFO    ][26603] Running state [barbican-keystone-listener] at time 14:40:52.186533
2019-05-09 14:40:52,187 [salt.state       :1813][INFO    ][26603] Executing state pkg.installed for [barbican-keystone-listener]
2019-05-09 14:40:52,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:40:52,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-keystone-listener'] in directory '/root'
2019-05-09 14:40:56,643 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:40:56,701 [salt.state       :300 ][INFO    ][26603] Made the following changes:
'barbican-keystone-listener' changed from 'absent' to '1:7.0.0-1~u16.04+mcp28'

2019-05-09 14:40:56,743 [salt.state       :915 ][INFO    ][26603] Loading fresh modules for state activity
2019-05-09 14:40:56,789 [salt.state       :1951][INFO    ][26603] Completed state [barbican-keystone-listener] at time 14:40:56.788980 duration_in_ms=4602.449
2019-05-09 14:40:56,793 [salt.state       :1780][INFO    ][26603] Running state [barbican-worker] at time 14:40:56.793947
2019-05-09 14:40:56,794 [salt.state       :1813][INFO    ][26603] Executing state pkg.installed for [barbican-worker]
2019-05-09 14:40:57,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-05-09 14:40:57,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'barbican-worker'] in directory '/root'
2019-05-09 14:41:01,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-05-09 14:41:01,692 [salt.state       :300 ][INFO    ][26603] Made the following changes:
'barbican-worker' changed from 'absent' to '1:7.0.0-1~u16.04+mcp28'

2019-05-09 14:41:01,730 [salt.state       :915 ][INFO    ][26603] Loading fresh modules for state activity
2019-05-09 14:41:01,784 [salt.state       :1951][INFO    ][26603] Completed state [barbican-worker] at time 14:41:01.784406 duration_in_ms=4990.458
2019-05-09 14:41:01,789 [salt.state       :1780][INFO    ][26603] Running state [python-memcache] at time 14:41:01.789435
2019-05-09 14:41:01,789 [salt.state       :1813][INFO    ][26603] Executing state pkg.installed for [python-memcache]
2019-05-09 14:41:02,760 [salt.state       :300 ][INFO    ][26603] All specified packages are already installed
2019-05-09 14:41:02,761 [salt.state       :1951][INFO    ][26603] Completed state [python-memcache] at time 14:41:02.761118 duration_in_ms=971.683
2019-05-09 14:41:02,768 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-available/barbican-api.conf] at time 14:41:02.768713
2019-05-09 14:41:02,768 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/sites-available/barbican-api.conf]
2019-05-09 14:41:02,769 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/sites-available/barbican-api.conf is not present
2019-05-09 14:41:02,769 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-available/barbican-api.conf] at time 14:41:02.769581 duration_in_ms=0.868
2019-05-09 14:41:02,769 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-enabled/barbican-api.conf] at time 14:41:02.769790
2019-05-09 14:41:02,770 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/sites-enabled/barbican-api.conf]
2019-05-09 14:41:02,770 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/sites-enabled/barbican-api.conf is not present
2019-05-09 14:41:02,770 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-enabled/barbican-api.conf] at time 14:41:02.770448 duration_in_ms=0.659
2019-05-09 14:41:02,770 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/conf-enabled/barbican-api.conf] at time 14:41:02.770649
2019-05-09 14:41:02,770 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/conf-enabled/barbican-api.conf]
2019-05-09 14:41:02,771 [salt.state       :300 ][INFO    ][26603] {'removed': '/etc/apache2/conf-enabled/barbican-api.conf'}
2019-05-09 14:41:02,771 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/conf-enabled/barbican-api.conf] at time 14:41:02.771331 duration_in_ms=0.681
2019-05-09 14:41:02,772 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:41:02.772183
2019-05-09 14:41:02,772 [salt.state       :1813][INFO    ][26603] Executing state file.exists for [/etc/apache2/sites-available/wsgi_barbican_admin.conf]
2019-05-09 14:41:02,772 [salt.state       :300 ][INFO    ][26603] Path /etc/apache2/sites-available/wsgi_barbican_admin.conf exists
2019-05-09 14:41:02,776 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-available/wsgi_barbican_admin.conf] at time 14:41:02.772815 duration_in_ms=0.632
2019-05-09 14:41:02,776 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:41:02.776742
2019-05-09 14:41:02,776 [salt.state       :1813][INFO    ][26603] Executing state file.managed for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-05-09 14:41:03,057 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/sites-available/wsgi_barbican.conf is in the correct state
2019-05-09 14:41:03,057 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:41:03.057891 duration_in_ms=281.148
2019-05-09 14:41:03,058 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:41:03.058586
2019-05-09 14:41:03,058 [salt.state       :1813][INFO    ][26603] Executing state file.exists for [/etc/apache2/sites-available/wsgi_barbican.conf]
2019-05-09 14:41:03,059 [salt.state       :300 ][INFO    ][26603] Path /etc/apache2/sites-available/wsgi_barbican.conf exists
2019-05-09 14:41:03,059 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-available/wsgi_barbican.conf] at time 14:41:03.059239 duration_in_ms=0.653
2019-05-09 14:41:03,059 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:41:03.059693
2019-05-09 14:41:03,059 [salt.state       :1813][INFO    ][26603] Executing state file.managed for [/etc/apache2/sites-available/keystone_wsgi.conf]
2019-05-09 14:41:03,383 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/sites-available/keystone_wsgi.conf is in the correct state
2019-05-09 14:41:03,383 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-available/keystone_wsgi.conf] at time 14:41:03.383381 duration_in_ms=323.687
2019-05-09 14:41:03,383 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:41:03.383927
2019-05-09 14:41:03,384 [salt.state       :1813][INFO    ][26603] Executing state file.symlink for [/etc/apache2/sites-enabled/keystone_wsgi.conf]
2019-05-09 14:41:03,389 [salt.state       :300 ][INFO    ][26603] Symlink /etc/apache2/sites-enabled/keystone_wsgi.conf is present and owned by root:root
2019-05-09 14:41:03,389 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-enabled/keystone_wsgi.conf] at time 14:41:03.389773 duration_in_ms=5.846
2019-05-09 14:41:03,393 [salt.state       :1780][INFO    ][26603] Running state [apache2] at time 14:41:03.393431
2019-05-09 14:41:03,393 [salt.state       :1813][INFO    ][26603] Executing state service.running for [apache2]
2019-05-09 14:41:03,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-05-09 14:41:03,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:41:03,425 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:41:03,440 [salt.state       :300 ][INFO    ][26603] The service apache2 is already running
2019-05-09 14:41:03,440 [salt.state       :1951][INFO    ][26603] Completed state [apache2] at time 14:41:03.440602 duration_in_ms=47.171
2019-05-09 14:41:03,441 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/conf-enabled/security.conf] at time 14:41:03.441750
2019-05-09 14:41:03,442 [salt.state       :1813][INFO    ][26603] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-05-09 14:41:03,444 [salt.state       :300 ][INFO    ][26603] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-05-09 14:41:03,444 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/conf-enabled/security.conf] at time 14:41:03.444275 duration_in_ms=2.525
2019-05-09 14:41:03,444 [salt.state       :1780][INFO    ][26603] Running state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:41:03.444535
2019-05-09 14:41:03,444 [salt.state       :1813][INFO    ][26603] Executing state file.absent for [/etc/apache2/sites-enabled/keystone_wsgi]
2019-05-09 14:41:03,445 [salt.state       :300 ][INFO    ][26603] File /etc/apache2/sites-enabled/keystone_wsgi is not present
2019-05-09 14:41:03,445 [salt.state       :1951][INFO    ][26603] Completed state [/etc/apache2/sites-enabled/keystone_wsgi] at time 14:41:03.445286 duration_in_ms=0.751
2019-05-09 14:41:03,446 [salt.state       :1780][INFO    ][26603] Running state [barbican_ssl_mysql] at time 14:41:03.446576
2019-05-09 14:41:03,446 [salt.state       :1813][INFO    ][26603] Executing state test.show_notification for [barbican_ssl_mysql]
2019-05-09 14:41:03,447 [salt.state       :300 ][INFO    ][26603] Running barbican._ssl.mysql
2019-05-09 14:41:03,447 [salt.state       :1951][INFO    ][26603] Completed state [barbican_ssl_mysql] at time 14:41:03.447229 duration_in_ms=0.654
2019-05-09 14:41:03,447 [salt.state       :1780][INFO    ][26603] Running state [barbican_ssl_rabbitmq] at time 14:41:03.447654
2019-05-09 14:41:03,447 [salt.state       :1813][INFO    ][26603] Executing state test.show_notification for [barbican_ssl_rabbitmq]
2019-05-09 14:41:03,448 [salt.state       :300 ][INFO    ][26603] Running barbican._ssl.rabbitmq
2019-05-09 14:41:03,452 [salt.state       :1951][INFO    ][26603] Completed state [barbican_ssl_rabbitmq] at time 14:41:03.452280 duration_in_ms=4.626
2019-05-09 14:41:03,454 [salt.state       :1780][INFO    ][26603] Running state [/etc/barbican/barbican.conf] at time 14:41:03.454478
2019-05-09 14:41:03,454 [salt.state       :1813][INFO    ][26603] Executing state file.managed for [/etc/barbican/barbican.conf]
2019-05-09 14:41:03,480 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'barbican/files/rocky/barbican.conf.Debian'
2019-05-09 14:41:03,627 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/service/_wsgi_default.conf'
2019-05-09 14:41:03,643 [salt.fileclient  :1219][INFO    ][26603] Fetching file from saltenv 'base', ** done ** 'barbican/files/rocky/plugin/_simple_crypto.conf'
2019-05-09 14:41:03,789 [salt.state       :300 ][INFO    ][26603] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -16,9 +18,11 @@
 # Maximum allowed http request size against the barbican-api. (integer
 # value)
 #max_allowed_request_size_in_bytes = 15000
+max_allowed_request_size_in_bytes = 1000000
 
 # Maximum allowed secret size in bytes. (integer value)
 #max_allowed_secret_in_bytes = 10000
+max_allowed_secret_in_bytes = 10000
 
 # Host name, for use in HATEOAS-style references Note: Typically this
 # would be the load balanced endpoint that clients would use to
@@ -27,6 +31,7 @@
 # to override default config value which is 'http://localhost:9311'
 # (string value)
 #host_href = http://localhost:9311
+host_href = http://192.168.10.35:9311
 
 # SQLAlchemy connection string for the reference implementation
 # registry server. Any valid SQLAlchemy connection string is fine.
@@ -35,6 +40,7 @@
 # Note: For absolute addresses, use '////' slashes after 'sqlite:'.
 # (string value)
 #sql_connection = sqlite:///barbican.sqlite
+sql_connection = mysql+pymysql://barbican:opnfv_secret@192.168.10.23/barbican?charset=utf8
 
 # Period in seconds after which SQLAlchemy should reestablish its
 # connection to the database. MySQL uses a default `wait_timeout` of 8
@@ -43,6 +49,7 @@
 # value to ensure that SQLAlchemy reconnects before MySQL can drop the
 # connection. (integer value)
 #sql_idle_timeout = 3600
+sql_idle_timeout = 180
 
 # Maximum number of database connection retries during startup. Set to
 # -1 to specify an infinite retry count. (integer value)
@@ -54,14 +61,17 @@
 
 # Create the Barbican database on service startup. (boolean value)
 #db_auto_create = true
+db_auto_create = False
 
 # Maximum page size for the 'limit' paging URL parameter. (integer
 # value)
 #max_limit_paging = 100
+max_limit_paging = 100
 
 # Default page size for the 'limit' paging URL parameter. (integer
 # value)
 #default_limit_paging = 10
+default_limit_paging = 10
 
 # Accepts a class imported from the sqlalchemy.pool module, and
 # handles the details of building the pool for you. If commented out,
@@ -109,7 +119,6 @@
 # provided then the existence of this option overrides the usage of
 # that option. (string value)
 #backdoor_socket = <None>
-
 #
 # From oslo.log
 #
@@ -128,7 +137,6 @@
 # logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
 # %(default)s . This option is ignored if log_config_append is set.
@@ -226,7 +234,6 @@
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -281,6 +288,7 @@
 # timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
+
 # Expiration timeout in seconds of a name service record about
 # existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
@@ -415,6 +423,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other
 # drivers include amqp and zmq. (string value)
@@ -428,49 +437,45 @@
 # option. (string value)
 #control_exchange = openstack
 
+
 #
 # From oslo.service.periodic_task
 #
 
 # Some periodic tasks can be run in a separate process. Should we run
 # them here? (boolean value)
-#run_external_periodic_tasks = true
-
-#
+#run_external_periodic_tasks = true#
 # From oslo.service.wsgi
 #
 
 # File name for the paste.deploy config for api service (string value)
 #api_paste_config = api-paste.ini
 
-# A python format string that is used as the template to generate log
-# lines. The following values can beformatted into it: client_ip,
-# date_time, request_line, status_code, body_length, wall_seconds.
-# (string value)
+# A python format string that is used as the template to generate log lines.
+# The following values can beformatted into it: client_ip, date_time,
+# request_line, status_code, body_length, wall_seconds. (string value)
 #wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s  len: %(body_length)s time: %(wall_seconds).7f
 
-# Sets the value of TCP_KEEPIDLE in seconds for each server socket.
-# Not supported on OS X. (integer value)
+# Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not
+# supported on OS X. (integer value)
 #tcp_keepidle = 600
 
 # Size of the pool of greenthreads used by wsgi (integer value)
 #wsgi_default_pool_size = 100
 
-# Maximum line size of message headers to be accepted. max_header_line
-# may need to be increased when using large tokens (typically those
-# generated when keystone is configured to use PKI tokens with big
-# service catalogs). (integer value)
+# Maximum line size of message headers to be accepted. max_header_line may need
+# to be increased when using large tokens (typically those generated when
+# keystone is configured to use PKI tokens with big service catalogs). (integer
+# value)
 #max_header_line = 16384
 
-# If False, closes the client socket connection explicitly. (boolean
-# value)
+# If False, closes the client socket connection explicitly. (boolean value)
 #wsgi_keep_alive = true
 
-# Timeout for client connections' socket operations. If an incoming
-# connection is idle for this number of seconds it will be closed. A
-# value of '0' means wait forever. (integer value)
+# Timeout for client connections' socket operations. If an incoming connection
+# is idle for this number of seconds it will be closed. A value of '0' means
+# wait forever. (integer value)
 #client_socket_timeout = 900
-
 
 [certificate]
 
@@ -500,35 +505,6 @@
 
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain
-# received in the requests "origin" header. Format:
-# "<protocol>://<host>[:<port>]", no trailing slash. Example:
-# https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials
-# (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to
-# HTTP Simple Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Project-Id,X-Identity-Status,X-User-Id,X-Storage-Token,X-Domain-Id,X-User-Domain-Id,X-Project-Domain-Id,X-Roles
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list
-# value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual
-# request. (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Project-Id,X-Identity-Status,X-User-Id,X-Storage-Token,X-Domain-Id,X-User-Domain-Id,X-Project-Domain-Id,X-Roles
-
 
 [crypto]
 
@@ -538,119 +514,94 @@
 
 # Extension namespace to search for plugins. (string value)
 #namespace = barbican.crypto.plugin
+namespace = barbican.crypto.plugin
 
 # List of crypto plugins to load. (multi valued)
 #enabled_crypto_plugins = simple_crypto
 
 
-[dogtag_plugin]
-
-#
-# From barbican.plugin.dogtag
-#
-
-# Path to PEM file for authentication (string value)
-#pem_path = /etc/barbican/kra_admin_cert.pem
-
-# Hostname for the Dogtag instance (string value)
-#dogtag_host = localhost
-
-# Port for the Dogtag instance (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#dogtag_port = 8443
-
-# Path to the NSS certificate database (string value)
-#nss_db_path = /etc/barbican/alias
-
-# Password for the NSS certificate databases (string value)
-#nss_password = <None>
-
-# Profile for simple CMC requests (string value)
-#simple_cmc_profile = caOtherCert
-
-# List of automatically approved enrollment profiles (string value)
-#auto_approved_profiles = caServerCert
-
-# Time in days for CA entries to expire (string value)
-#ca_expiration_time = 1
-
-# Working directory for Dogtag plugin (string value)
-#plugin_working_dir = /etc/barbican/dogtag
+[secretstore:software]
+secret_store_plugin = store_crypto
+crypto_plugin = simple_crypto
+global_default = True
+
+
+
+[simple_crypto_plugin]
+#
+# From barbican.plugin.crypto.simple
+#
+
+# Key encryption key to be used by Simple Crypto Plugin (string value)
+#kek = dGhpcnR5X3R3b19ieXRlX2tleWJsYWhibGFoYmxhaGg=
+kek = 'YWJjZGVmZ2hpamtsbW5vcHFyc3R1dnd4eXoxMjM0NTY='
 
 # User friendly plugin name (string value)
-#plugin_name = Dogtag KRA
-
-# Retries when storing or generating secrets (integer value)
-#retries = 3
+#plugin_name = Software Only Crypto
 
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
 
-# Complete "public" Identity API endpoint. This endpoint should not be
-# an "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to
-# authenticate. Although this endpoint should ideally be unversioned,
-# client support in the wild varies. If you're using a versioned v2
-# endpoint here, then this should *not* be the same endpoint the
-# service user utilizes for validating tokens, because normal end
-# users may not be able to reach that endpoint. (string value)
+# Complete "public" Identity API endpoint. This endpoint should not be an
+# "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. (string
+# value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
-
-# DEPRECATED: Complete "public" Identity API endpoint. This endpoint
-# should not be an "admin" endpoint, as it should be accessible by all
-# end users. Unauthenticated clients are redirected to this endpoint
-# to authenticate. Although this endpoint should ideally be
-# unversioned, client support in the wild varies. If you're using a
-# versioned v2 endpoint here, then this should *not* be the same
-# endpoint the service user utilizes for validating tokens, because
-# normal end users may not be able to reach that endpoint. This option
-# is deprecated in favor of www_authenticate_uri and will be removed
-# in the S release. (string value)
+www_authenticate_uri = http://192.168.10.35:5000
+
+# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
+# be an "admin" endpoint, as it should be accessible by all end users.
+# Unauthenticated clients are redirected to this endpoint to authenticate.
+# Although this endpoint should ideally be unversioned, client support in the
+# wild varies. If you're using a versioned v2 endpoint here, then this should
+# *not* be the same endpoint the service user utilizes for validating tokens,
+# because normal end users may not be able to reach that endpoint. This option
+# is deprecated in favor of www_authenticate_uri and will be removed in the S
+# release. (string value)
 # This option is deprecated for removal since Queens.
 # Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of
-# www_authenticate_uri and will be removed in the S  release.
+# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
+# and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
 
-# Do not handle authorization requests within the middleware, but
-# delegate the authorization decision to downstream WSGI components.
-# (boolean value)
+# Do not handle authorization requests within the middleware, but delegate the
+# authorization decision to downstream WSGI components. (boolean value)
 #delay_auth_decision = false
 
-# Request timeout value for communicating with Identity API server.
-# (integer value)
+# Request timeout value for communicating with Identity API server. (integer
+# value)
 #http_connect_timeout = <None>
 
-# How many times are we trying to reconnect when communicating with
-# Identity API Server. (integer value)
+# How many times are we trying to reconnect when communicating with Identity
+# API Server. (integer value)
 #http_request_max_retries = 3
 
 # Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this
-# option to have the middleware share a caching backend with swift.
-# Otherwise, use the ``memcached_servers`` option instead. (string
-# value)
+# auth_token middleware is deployed with a Swift cache, use this option to have
+# the middleware share a caching backend with swift. Otherwise, use the
+# ``memcached_servers`` option instead. (string value)
 #cache = <None>
 
-# Required if identity server requires client certificate (string
-# value)
+# Required if identity server requires client certificate (string value)
 #certfile = <None>
 
-# Required if identity server requires client certificate (string
-# value)
+# Required if identity server requires client certificate (string value)
 #keyfile = <None>
 
-# A PEM encoded Certificate Authority to use when verifying HTTPs
-# connections. Defaults to system CAs. (string value)
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
 #cafile = <None>
 
 # Verify HTTPS connections. (boolean value)
@@ -659,137 +610,203 @@
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
 
-# DEPRECATED: Directory used to cache files related to PKI tokens.
-# This option has been deprecated in the Ocata release and will be
-# removed in the P release. (string value)
+# DEPRECATED: Directory used to cache files related to PKI tokens. This option
+# has been deprecated in the Ocata release and will be removed in the P
+# release. (string value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #signing_dir = <None>
 
-# Optionally specify a list of memcached server(s) to use for caching.
-# If left undefined, tokens will instead be cached in-process. (list
-# value)
+# Optionally specify a list of memcached server(s) to use for caching. If left
+# undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
 
-# In order to prevent excessive effort spent validating tokens, the
-# middleware caches previously-seen tokens for a configurable duration
-# (in seconds). Set to -1 to disable caching completely. (integer
-# value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked
-# tokens is retrieved from the Identity service (in seconds). A high
-# number of revocation events combined with a low cache duration may
-# significantly reduce performance. Only valid for PKI tokens. This
-# option has been deprecated in the Ocata release and will be removed
-# in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be
-# authenticated or authenticated and encrypted. If MAC, token data is
-# authenticated (with HMAC) in the cache. If ENCRYPT, token data is
-# encrypted and authenticated in the cache. If the value is not one of
-# these options or empty, auth_token will raise an exception on
-# initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This
-# string is used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead
-# before it is tried again. (integer value)
+# (Optional) Number of seconds memcached server is considered dead before it is
+# tried again. (integer value)
 #memcache_pool_dead_retry = 300
 
-# (Optional) Maximum total number of open connections to every
-# memcached server. (integer value)
+# (Optional) Maximum total number of open connections to every memcached
+# server. (integer value)
 #memcache_pool_maxsize = 10
 
-# (Optional) Socket timeout in seconds for communicating with a
-# memcached server. (integer value)
+# (Optional) Socket timeout in seconds for communicating with a memcached
+# server. (integer value)
 #memcache_pool_socket_timeout = 3
 
-# (Optional) Number of seconds a connection to memcached is held
-# unused in the pool before it is closed. (integer value)
+# (Optional) Number of seconds a connection to memcached is held unused in the
+# pool before it is closed. (integer value)
 #memcache_pool_unused_timeout = 60
 
-# (Optional) Number of seconds that an operation will wait to get a
-# memcached client connection from the pool. (integer value)
+# (Optional) Number of seconds that an operation will wait to get a memcached
+# client connection from the pool. (integer value)
 #memcache_pool_conn_get_timeout = 10
 
-# (Optional) Use the advanced (eventlet safe) memcached client pool.
-# The advanced pool will only work under python 2.x. (boolean value)
+# (Optional) Use the advanced (eventlet safe) memcached client pool. The
+# advanced pool will only work under python 2.x. (boolean value)
 #memcache_use_advanced_pool = false
 
-# (Optional) Indicate whether to set the X-Service-Catalog header. If
-# False, middleware will not ask for service catalog on token
-# validation and will not set the X-Service-Catalog header. (boolean
-# value)
+# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
+# middleware will not ask for service catalog on token validation and will not
+# set the X-Service-Catalog header. (boolean value)
 #include_service_catalog = true
 
-# Used to control the use and type of token binding. Can be set to:
-# "disabled" to not check token binding. "permissive" (default) to
-# validate binding information if the bind type is of a form known to
-# the server and ignore it if not. "strict" like "permissive" but if
-# the bind type is unknown the token will be rejected. "required" any
-# form of token binding is needed to be allowed. Finally the name of a
-# binding method that must be present in tokens. (string value)
+# Used to control the use and type of token binding. Can be set to: "disabled"
+# to not check token binding. "permissive" (default) to validate binding
+# information if the bind type is of a form known to the server and ignore it
+# if not. "strict" like "permissive" but if the bind type is unknown the token
+# will be rejected. "required" any form of token binding is needed to be
+# allowed. Finally the name of a binding method that must be present in tokens.
+# (string value)
 #enforce_token_bind = permissive
 
-# DEPRECATED: If true, the revocation list will be checked for cached
-# tokens. This requires that PKI tokens are configured on the identity
-# server. (boolean value)
+# DEPRECATED: If true, the revocation list will be checked for cached tokens.
+# This requires that PKI tokens are configured on the identity server. (boolean
+# value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #check_revocations_for_cached = false
 
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may
-# be a single algorithm or multiple. The algorithms are those
-# supported by Python standard hashlib.new(). The hashes will be tried
-# in the order given, so put the preferred one first for performance.
-# The result of the first hash will be stored in the cache. This will
-# typically be set to multiple values only while migrating from a less
-# secure algorithm to a more secure one. Once all the old tokens are
-# expired this option should be set to a single value for better
+# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
+# single algorithm or multiple. The algorithms are those supported by Python
+# standard hashlib.new(). The hashes will be tried in the order given, so put
+# the preferred one first for performance. The result of the first hash will be
+# stored in the cache. This will typically be set to multiple values only while
+# migrating from a less secure algorithm to a more secure one. Once all the old
+# tokens are expired this option should be set to a single value for better
 # performance. (list value)
 # This option is deprecated for removal since Ocata.
 # Its value may be silently ignored in the future.
 # Reason: PKI token format is no longer supported.
 #hash_algorithms = md5
 
-# A choice of roles that must be present in a service token. Service
-# tokens are allowed to request that an expired token can be used and
-# so this check should tightly control that only actual services
-# should be sending this token. Roles here are applied as an ANY check
-# so any role in this list must be present. For backwards
-# compatibility reasons this currently only affects the allow_expired
-# check. (list value)
+# A choice of roles that must be present in a service token. Service tokens are
+# allowed to request that an expired token can be used and so this check should
+# tightly control that only actual services should be sending this token. Roles
+# here are applied as an ANY check so any role in this list must be present.
+# For backwards compatibility reasons this currently only affects the
+# allow_expired check. (list value)
 #service_token_roles = service
 
-# For backwards compatibility reasons we must let valid service tokens
-# pass that don't pass the service_token_roles check as valid. Setting
-# this true will become the default in a future release and should be
-# enabled if possible. (boolean value)
+# For backwards compatibility reasons we must let valid service tokens pass
+# that don't pass the service_token_roles check as valid. Setting this true
+# will become the default in a future release and should be enabled if
+# possible. (boolean value)
 #service_token_roles_required = false
 
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
-
-# Config Section from which to load plugin specific options (string
-# value)
+auth_type = password
+
+# Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = barbican
 
 [keystone_notifications]
 
@@ -800,11 +817,12 @@
 # True enables keystone notification listener  functionality. (boolean
 # value)
 #enable = false
+enable = True
 
 # The default exchange under which topics are scoped. May be
 # overridden by an exchange name specified in the transport_url
 # option. (string value)
-#control_exchange = keystone
+#control_exchange = openstack
 
 # Keystone notification queue topic name. This name needs to match one
 # of values mentioned in Keystone deployment's 'notification_topics'
@@ -820,6 +838,7 @@
 # error. Enable this only when underlying transport supports this
 # feature. (boolean value)
 #allow_requeue = false
+allow_requeue = False
 
 # Version of tasks invoked via notifications (string value)
 #version = 1.0
@@ -827,46 +846,6 @@
 # Define the number of max threads to be used for notification server
 # processing functionality. (integer value)
 #thread_pool_size = 10
-
-
-[kmip_plugin]
-
-#
-# From barbican.plugin.secret_store.kmip
-#
-
-# Username for authenticating with KMIP server (string value)
-#username = <None>
-
-# Password for authenticating with KMIP server (string value)
-#password = <None>
-
-# Address of the KMIP server (string value)
-#host = localhost
-
-# Port for the KMIP server (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#port = 5696
-
-# SSL version, maps to the module ssl's constants (string value)
-#ssl_version = PROTOCOL_TLSv1_2
-
-# File path to concatenated "certification authority" certificates
-# (string value)
-#ca_certs = <None>
-
-# File path to local client certificate (string value)
-#certfile = <None>
-
-# File path to local client certificate keyfile (string value)
-#keyfile = <None>
-
-# Only support PKCS#1 encoding of asymmetric keys (boolean value)
-#pkcs1_only = false
-
-# User friendly plugin name (string value)
-#plugin_name = KMIP HSM
 
 
 [matchmaker_redis]
@@ -913,331 +892,7 @@
 
 # Timeout in ms on blocking socket operations. (integer value)
 #socket_timeout = 10000
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a
-# generated UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are
-# given, it will use the system's CA-bundle to verify the server's
-# certificate. (boolean value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate
-# (string value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication
-# (string value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate
-# (optional) (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate
-# matches the hostname in the transport_url. In some configurations it
-# may be preferable to use the virtual hostname instead, for example
-# if the server uses the Server Name Indication TLS extension
-# (rfc6066) to provide a certificate per virtual host. Set
-# ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string
-# value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after
-# each unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval +
-# connection_retry_backoff (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due
-# to a recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which
-# failed due to a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used
-# when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used
-# when caller does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link
-# after expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not
-# support routing otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not
-# natively support virtual hosting (such as qpidd). When set to true
-# the virtual host name will be added to all message bus addresses,
-# effectively creating a private 'subnet' per virtual host. Set to
-# False if the message bus supports virtual hosting using the
-# 'hostname' field in the AMQP 1.0 Open performative as the name of
-# the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string
-# value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used
-# by the message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular
-# RPC/Notification server. Used by the message bus to identify
-# messages sent to a single destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers.
-# Used by the message bus to identify messages that should be
-# delivered in a round-robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy
-# (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool
-# (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate
-# message consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds
-# (floating point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer
-# value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate
-# (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If
-# not set, we fall back to the same configuration used for RPC.
-# (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message
-# which failed to be delivered due to a recoverable error. 0 - No
-# retry, -1 - indefinite (integer value)
-#retry = -1
-
-
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
@@ -1250,28 +905,9 @@
 # Auto-delete queues in AMQP. (boolean value)
 #amqp_auto_delete = false
 
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are
-# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be
-# available on some distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled).
-# (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
+# Enable SSL (boolean value)
+#ssl = <None>
+
 
 # How long to wait before reconnecting in response to an AMQP consumer
 # cancel notification. (floating point value)
@@ -1378,7 +1014,14 @@
 
 # Specifies the number of messages to prefetch. Setting to zero allows
 # unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
 
 # Number of seconds after which the Rabbit broker is considered down
 # if heartbeat's keep-alive fails (0 disable the heartbeat).
@@ -1389,292 +1032,178 @@
 # heartbeat. (integer value)
 #heartbeat_rate = 2
 
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet
-# interface, or IP. The "host" option should point or resolve to this
-# address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
 # Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic.
-# Default is unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address.
-# Must match "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent
-# after closing a socket. The default value of -1 specifies an
-# infinite linger period. The value of 0 specifies no linger period.
-# Pending messages shall be discarded immediately when the socket is
-# closed. Positive values specify an upper bound for the linger
-# period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises
-# timeout exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about
-# existing target ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing
-# target. (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
-# (boolean value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes
-# sense only with use_router_proxy=False which means to use direct
-# connections for direct message types (ignored otherwise). (boolean
-# value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover
-# reasons. This option is actual only in dynamic connections mode.
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
 # (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with
-# ZMQBindError. (integer value)
-#rpc_zmq_bind_port_retries = 100
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
 
 # Default serialization mechanism for serializing/deserializing
 # outgoing/incoming messages (string value)
 # Possible values:
 # json - <No description provided>
 # msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means
-# not keeping a queue when server side disconnects. False means to
-# keep queue and messages even if server is disconnected, when the
-# server appears we send all accumulated messages to it. (boolean
-# value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
-# (or any other negative value) means to skip any overrides and leave
-# it to OS default; 0 and 1 (or any other positive value) mean to
-# disable and enable the option respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition.
-# The unit is platform dependent, for example, seconds in Linux,
-# milliseconds in Windows etc. The default value of -1 (or any other
-# negative value and 0) means to skip any overrides and leave it to OS
-# default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring
-# that remote end is not available. The default value of -1 (or any
-# other negative value and 0) means to skip any overrides and leave it
-# to OS default. (integer value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not
-# received. The unit is platform dependent, for example, seconds in
-# Linux, milliseconds in Windows etc. The default value of -1 (or any
-# other negative value and 0) means to skip any overrides and leave it
-# to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer
-# value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which
-# it is not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism
-# works only via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each
-# retry attempt this timeout is multiplied by some specified
-# multiplier. (integer value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt.
-# (integer value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems
-# occurred: positive value N means at most N retries, 0 means no
-# retries, None or -1 (or any other negative values) mean to retry
-# forever. This option is used only if acknowledgments are enabled.
-# (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option
-# has higher priority then the default publishers list taken from the
-# matchmaker. (list value)
-#subscribe_on =
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
 
 
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if
 # the middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
+enable_proxy_headers_parsing = True
 
 [oslo_policy]
 
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is
-# compared to the ``scope_types`` of the policy being enforced. If the
-# scopes do not match, an ``InvalidScope`` exception will be raised.
-# If ``False``, a message will be logged informing operators that
-# policies are being invoked with mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string
-# value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be
-# relative to any directory in the search path defined by the
-# config_dir option, or absolute paths. The file defined by
-# policy_file must exist for these directories to be searched.
-# Missing or empty directories are ignored. (multi valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check
-# (string value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean
-# value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string
-# value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string
-# value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[p11_crypto_plugin]
-
-#
-# From barbican.plugin.crypto.p11
-#
-
-# Path to vendor PKCS11 library (string value)
-#library_path = <None>
-
-# Password to login to PKCS11 session (string value)
-#login = <None>
-
-# Master KEK label (as stored in the HSM) (string value)
-#mkek_label = <None>
-
-# Master KEK length in bytes. (integer value)
-#mkek_length = <None>
-
-# Master HMAC Key label (as stored in the HSM) (string value)
-#hmac_label = <None>
-
-# HSM Slot ID (integer value)
-#slot_id = 1
-
-# Flag for Read/Write Sessions (boolean value)
-#rw_session = true
-
-# Project KEK length in bytes. (integer value)
-#pkek_length = 32
-
-# Project KEK Cache Time To Live, in seconds (integer value)
-#pkek_cache_ttl = 900
-
-# Project KEK Cache Item Limit (integer value)
-#pkek_cache_limit = 100
-
-# Secret encryption mechanism (string value)
-# Deprecated group/name - [p11_crypto_plugin]/algorithm
-#encryption_mechanism = CKM_AES_CBC
-
-# HMAC Key Type (string value)
-#hmac_key_type = CKK_AES
-
-# HMAC Key Generation Algorithm (string value)
-#hmac_keygen_mechanism = CKM_AES_KEY_GEN
-
-# File to pull entropy for seeding RNG (string value)
-#seed_file =
-
-# Amount of data to read from file for seed (integer value)
-#seed_length = 32
-
-# User friendly plugin name (string value)
-#plugin_name = PKCS11 HSM
-
-# Generate IVs for CKM_AES_GCM mechanism. (boolean value)
-# Deprecated group/name - [p11_crypto_plugin]/generate_iv
-#aes_gcm_generate_iv = true
-
-# Always set CKA_SENSITIVE=CK_TRUE including CKA_EXTRACTABLE=CK_TRUE
-# keys. (boolean value)
-#always_set_cka_sensitive = true
-
 
 [queue]
 
@@ -1685,6 +1214,7 @@
 # True enables queuing, False invokes workers synchronously (boolean
 # value)
 #enable = false
+
 
 # Queue namespace (string value)
 #namespace = barbican
@@ -1754,73 +1284,36 @@
 # Flag to enable multiple secret store plugin backend support. Default
 # is False (boolean value)
 #enable_multiple_secret_stores = false
+enable_multiple_secret_stores = True
 
 # List of suffix to use for looking up plugins which are supported
 # with multiple backend support. (list value)
 #stores_lookup_suffix = <None>
-
-
-[simple_crypto_plugin]
-
-#
-# From barbican.plugin.crypto.simple
-#
-
-# Key encryption key to be used by Simple Crypto Plugin (string value)
-#kek = dGhpcnR5X3R3b19ieXRlX2tleWJsYWhibGFoYmxhaGg=
-
-# User friendly plugin name (string value)
-#plugin_name = Software Only Crypto
-
-
-[snakeoil_ca_plugin]
-
-#
-# From barbican.certificate.plugin.snakeoil
-#
-
-# Path to CA certificate file (string value)
-#ca_cert_path = <None>
-
-# Path to CA certificate key file (string value)
-#ca_cert_key_path = <None>
-
-# Path to CA certificate chain file (string value)
-#ca_cert_chain_path = <None>
-
-# Path to CA chain pkcs7 file (string value)
-#ca_cert_pkcs7_path = <None>
-
-# Directory in which to store certs/keys for subcas (string value)
-#subca_cert_key_directory = /etc/barbican/snakeoil-cas
+stores_lookup_suffix = software
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
 
-# CA certificate file to use to verify connecting clients. (string
-# value)
+# CA certificate file to use to verify connecting clients. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_ca_file
 #ca_file = <None>
 
-# Certificate file to use when starting the server securely. (string
-# value)
+# Certificate file to use when starting the server securely. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_cert_file
 #cert_file = <None>
 
-# Private key file to use when starting the server securely. (string
-# value)
+# Private key file to use when starting the server securely. (string value)
 # Deprecated group/name - [DEFAULT]/ssl_key_file
 #key_file = <None>
 
-# SSL version to use (valid only if SSL enabled). Valid values are
-# TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be
-# available on some distributions. (string value)
+# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
+# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
+# distributions. (string value)
 #version = <None>
 
-# Sets the list of available ciphers. value should be a string in the
-# OpenSSL cipher list format. (string value)
+# Sets the list of available ciphers. value should be a string in the OpenSSL
+# cipher list format. (string value)
 #ciphers = <None>

2019-05-09 14:41:03,790 [salt.state       :1951][INFO    ][26603] Completed state [/etc/barbican/barbican.conf] at time 14:41:03.790603 duration_in_ms=336.125
2019-05-09 14:41:03,791 [salt.state       :1780][INFO    ][26603] Running state [barbican-db-manage upgrade] at time 14:41:03.791088
2019-05-09 14:41:03,791 [salt.state       :1813][INFO    ][26603] Executing state cmd.run for [barbican-db-manage upgrade]
2019-05-09 14:41:03,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command '/bin/false' in directory '/root'
2019-05-09 14:41:03,809 [salt.state       :300 ][INFO    ][26603] onlyif execution failed
2019-05-09 14:41:03,809 [salt.state       :1951][INFO    ][26603] Completed state [barbican-db-manage upgrade] at time 14:41:03.809358 duration_in_ms=18.27
2019-05-09 14:41:03,810 [salt.state       :1780][INFO    ][26603] Running state [barbican-manage db sync_secret_stores] at time 14:41:03.810687
2019-05-09 14:41:03,811 [salt.state       :1813][INFO    ][26603] Executing state cmd.run for [barbican-manage db sync_secret_stores]
2019-05-09 14:41:03,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command 'barbican-manage db sync_secret_stores' as user 'barbican' in directory '/var/lib/barbican'
2019-05-09 14:41:06,085 [salt.state       :300 ][INFO    ][26603] {'pid': 28548, 'retcode': 0, 'stderr': '', 'stdout': "2019-05-09 14:41:04.982 28551 INFO barbican.model.sync [-] Syncing the secret_stores table with barbican.conf\x1b[00m\n2019-05-09 14:41:04.983 28551 INFO barbican.model.repositories [-] Setting up database engine and session factory\x1b[00m\n2019-05-09 14:41:05.012 28551 WARNING oslo_db.sqlalchemy.engines [-] MySQL SQL mode is 'NO_ENGINE_SUBSTITUTION', consider enabling TRADITIONAL or STRICT_ALL_TABLES: Empty\x1b[00m\n2019-05-09 14:41:05.017 28551 INFO barbican.model.repositories [-] Not auto-creating barbican registry DB\x1b[00m\n2019-05-09 14:41:05.941 28551 INFO barbican.plugin.crypto.simple_crypto [-] Software Only Crypto initialized\x1b[00m"}
2019-05-09 14:41:06,086 [salt.state       :1951][INFO    ][26603] Completed state [barbican-manage db sync_secret_stores] at time 14:41:06.085961 duration_in_ms=2275.273
2019-05-09 14:41:06,087 [salt.state       :1780][INFO    ][26603] Running state [wsgi_barbican] at time 14:41:06.087911
2019-05-09 14:41:06,088 [salt.state       :1813][INFO    ][26603] Executing state apache_site.enabled for [wsgi_barbican]
2019-05-09 14:41:06,088 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['a2ensite', 'wsgi_barbican'] in directory '/root'
2019-05-09 14:41:06,162 [salt.state       :300 ][INFO    ][26603] {'new': 'wsgi_barbican', 'old': None}
2019-05-09 14:41:06,163 [salt.state       :1951][INFO    ][26603] Completed state [wsgi_barbican] at time 14:41:06.163123 duration_in_ms=75.211
2019-05-09 14:41:06,164 [salt.state       :1780][INFO    ][26603] Running state [wsgi_barbican_admin] at time 14:41:06.164148
2019-05-09 14:41:06,164 [salt.state       :1813][INFO    ][26603] Executing state apache_site.enabled for [wsgi_barbican_admin]
2019-05-09 14:41:06,165 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['a2ensite', 'wsgi_barbican_admin'] in directory '/root'
2019-05-09 14:41:06,242 [salt.state       :300 ][INFO    ][26603] {'new': 'wsgi_barbican_admin', 'old': None}
2019-05-09 14:41:06,242 [salt.state       :1951][INFO    ][26603] Completed state [wsgi_barbican_admin] at time 14:41:06.242769 duration_in_ms=78.621
2019-05-09 14:41:06,244 [salt.state       :1780][INFO    ][26603] Running state [apache2] at time 14:41:06.243978
2019-05-09 14:41:06,244 [salt.state       :1813][INFO    ][26603] Executing state service.running for [apache2]
2019-05-09 14:41:06,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:41:06,269 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-05-09 14:41:06,288 [salt.state       :300 ][INFO    ][26603] The service apache2 is already running
2019-05-09 14:41:06,288 [salt.state       :1951][INFO    ][26603] Completed state [apache2] at time 14:41:06.288573 duration_in_ms=44.594
2019-05-09 14:41:06,288 [salt.state       :1780][INFO    ][26603] Running state [apache2] at time 14:41:06.288849
2019-05-09 14:41:06,289 [salt.state       :1813][INFO    ][26603] Executing state service.mod_watch for [apache2]
2019-05-09 14:41:06,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-05-09 14:41:06,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-05-09 14:41:13,193 [salt.state       :300 ][INFO    ][26603] {'apache2': True}
2019-05-09 14:41:13,193 [salt.state       :1951][INFO    ][26603] Completed state [apache2] at time 14:41:13.193794 duration_in_ms=6904.944
2019-05-09 14:41:13,194 [salt.state       :1780][INFO    ][26603] Running state [barbican-keystone-listener] at time 14:41:13.194871
2019-05-09 14:41:13,195 [salt.state       :1813][INFO    ][26603] Executing state service.running for [barbican-keystone-listener]
2019-05-09 14:41:13,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'status', 'barbican-keystone-listener.service', '-n', '0'] in directory '/root'
2019-05-09 14:41:13,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-active', 'barbican-keystone-listener.service'] in directory '/root'
2019-05-09 14:41:13,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2019-05-09 14:41:13,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'barbican-keystone-listener.service'] in directory '/root'
2019-05-09 14:41:13,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-active', 'barbican-keystone-listener.service'] in directory '/root'
2019-05-09 14:41:13,290 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2019-05-09 14:41:13,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'barbican-keystone-listener.service'] in directory '/root'
2019-05-09 14:41:13,323 [salt.state       :300 ][INFO    ][26603] {'barbican-keystone-listener': True}
2019-05-09 14:41:13,323 [salt.state       :1951][INFO    ][26603] Completed state [barbican-keystone-listener] at time 14:41:13.323730 duration_in_ms=128.859
2019-05-09 14:41:13,324 [salt.state       :1780][INFO    ][26603] Running state [barbican-worker] at time 14:41:13.324088
2019-05-09 14:41:13,324 [salt.state       :1813][INFO    ][26603] Executing state service.dead for [barbican-worker]
2019-05-09 14:41:13,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'status', 'barbican-worker.service', '-n', '0'] in directory '/root'
2019-05-09 14:41:13,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-active', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:13,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:13,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:17,932 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command saltutil.find_job with jid 20190509144117924492
2019-05-09 14:41:17,944 [salt.minion      :1432][INFO    ][29104] Starting a new job with PID 29104
2019-05-09 14:41:17,968 [salt.minion      :1711][INFO    ][29104] Returning information for job: 20190509144117924492
2019-05-09 14:41:28,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-active', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:28,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:28,443 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:28,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:28,917 [salt.loaded.int.module.cmdmod:395 ][INFO    ][26603] Executing command ['systemctl', 'is-enabled', 'barbican-worker.service'] in directory '/root'
2019-05-09 14:41:28,937 [salt.state       :300 ][INFO    ][26603] {'barbican-worker': True}
2019-05-09 14:41:28,937 [salt.state       :1951][INFO    ][26603] Completed state [barbican-worker] at time 14:41:28.937789 duration_in_ms=15613.7
2019-05-09 14:41:28,940 [salt.minion      :1711][INFO    ][26603] Returning information for job: 20190509144032791368
2019-05-09 14:56:36,992 [salt.utils.schedule:1377][INFO    ][1658] Running scheduled job: __mine_interval
2019-05-09 14:58:00,576 [salt.minion      :1308][INFO    ][1658] User sudo_ubuntu Executing command cp.push_dir with jid 20190509145800567932
2019-05-09 14:58:00,603 [salt.minion      :1432][INFO    ][29268] Starting a new job with PID 29268
