2019-03-27 20:27:00,460 [salt.utils.decorators:613 ][WARNING ][3604] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:29:22,771 [salt.loaded.int.module.debian_ip:1964][WARNING ][3604] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-03-27 20:29:25,066 [salt.loaded.int.states.file:2298][WARNING ][3604] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:29:42,702 [salt.utils.decorators:613 ][WARNING ][17018] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:29:46,078 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17727] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2019-03-27 20:29:46,112 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17727] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2019-03-27 20:29:46,150 [salt.utils.parsers:1051][WARNING ][2061] Minion received a SIGTERM. Exiting.
2019-03-27 20:29:47,004 [salt.cli.daemons :293 ][INFO    ][17780] Setting up the Salt Minion "gtw01.mcp-fdio-noha.local"
2019-03-27 20:29:47,080 [salt.cli.daemons :82  ][INFO    ][17780] Starting up the Salt Minion
2019-03-27 20:29:47,080 [salt.utils.event :1017][INFO    ][17780] Starting pull socket on /var/run/salt/minion/minion_event_c6f133e694_pull.ipc
2019-03-27 20:29:47,884 [salt.minion      :976 ][INFO    ][17780] Creating minion process manager
2019-03-27 20:29:49,155 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][17780] Executing command ['date', '+%z'] in directory '/root'
2019-03-27 20:29:49,187 [salt.utils.schedule:568 ][INFO    ][17780] Updating job settings for scheduled job: __mine_interval
2019-03-27 20:29:49,198 [salt.minion      :1108][INFO    ][17780] Added mine.update to scheduler
2019-03-27 20:29:49,212 [salt.minion      :1975][INFO    ][17780] Minion is starting as user 'root'
2019-03-27 20:29:49,224 [salt.minion      :2336][INFO    ][17780] Minion is ready to receive requests!
2019-03-27 20:33:51,211 [salt.minion      :1308][INFO    ][17780] User sudo_ubuntu Executing command test.ping with jid 20190327203351204410
2019-03-27 20:33:51,233 [salt.minion      :1432][INFO    ][17970] Starting a new job with PID 17970
2019-03-27 20:33:51,252 [salt.minion      :1711][INFO    ][17970] Returning information for job: 20190327203351204410
2019-03-27 20:33:51,849 [salt.minion      :1308][INFO    ][17780] User sudo_ubuntu Executing command system.reboot with jid 20190327203351839796
2019-03-27 20:33:51,869 [salt.minion      :1432][INFO    ][17975] Starting a new job with PID 17975
2019-03-27 20:33:51,874 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][17975] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2019-03-27 20:33:52,263 [salt.utils.parsers:1051][WARNING ][17780] Minion received a SIGTERM. Exiting.
2019-03-27 20:33:52,264 [salt.cli.daemons :82  ][INFO    ][17780] Shutting down the Salt Minion
2019-03-27 20:33:53,422 [salt.minion      :1711][INFO    ][17975] Returning information for job: 20190327203351839796
2019-03-27 20:35:59,990 [salt.cli.daemons :293 ][INFO    ][3099] Setting up the Salt Minion "gtw01.mcp-fdio-noha.local"
2019-03-27 20:36:00,383 [salt.cli.daemons :82  ][INFO    ][3099] Starting up the Salt Minion
2019-03-27 20:36:00,384 [salt.utils.event :1017][INFO    ][3099] Starting pull socket on /var/run/salt/minion/minion_event_c6f133e694_pull.ipc
2019-03-27 20:36:01,271 [salt.minion      :976 ][INFO    ][3099] Creating minion process manager
2019-03-27 20:36:02,385 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3099] Executing command ['date', '+%z'] in directory '/root'
2019-03-27 20:36:02,425 [salt.utils.schedule:568 ][INFO    ][3099] Updating job settings for scheduled job: __mine_interval
2019-03-27 20:36:02,440 [salt.minion      :1108][INFO    ][3099] Added mine.update to scheduler
2019-03-27 20:36:02,452 [salt.minion      :1975][INFO    ][3099] Minion is starting as user 'root'
2019-03-27 20:36:02,463 [salt.minion      :2336][INFO    ][3099] Minion is ready to receive requests!
2019-03-27 20:36:28,567 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command test.ping with jid 20190327203628553303
2019-03-27 20:36:28,577 [salt.minion      :1432][INFO    ][3315] Starting a new job with PID 3315
2019-03-27 20:36:28,632 [salt.minion      :1711][INFO    ][3315] Returning information for job: 20190327203628553303
2019-03-27 20:36:29,274 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command state.apply with jid 20190327203629260180
2019-03-27 20:36:29,283 [salt.minion      :1432][INFO    ][3320] Starting a new job with PID 3320
2019-03-27 20:36:32,914 [salt.state       :915 ][INFO    ][3320] Loading fresh modules for state activity
2019-03-27 20:36:32,951 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2019-03-27 20:36:33,203 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2019-03-27 20:36:33,312 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2019-03-27 20:36:33,392 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2019-03-27 20:36:33,463 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2019-03-27 20:36:33,549 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2019-03-27 20:36:33,618 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2019-03-27 20:36:33,692 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2019-03-27 20:36:33,903 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2019-03-27 20:36:33,980 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2019-03-27 20:36:34,176 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/hugepages.sls'
2019-03-27 20:36:34,254 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/dpdk.sls'
2019-03-27 20:36:34,323 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2019-03-27 20:36:34,426 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2019-03-27 20:36:34,499 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2019-03-27 20:36:34,570 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2019-03-27 20:36:34,654 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2019-03-27 20:36:34,728 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2019-03-27 20:36:34,827 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2019-03-27 20:36:34,898 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2019-03-27 20:36:34,970 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2019-03-27 20:36:35,054 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2019-03-27 20:36:35,127 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2019-03-27 20:36:35,767 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2019-03-27 20:36:35,837 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2019-03-27 20:36:35,918 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2019-03-27 20:36:35,932 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2019-03-27 20:36:35,967 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2019-03-27 20:36:36,004 [salt.state       :1780][INFO    ][3320] Running state [/etc/environment] at time 20:36:36.004567
2019-03-27 20:36:36,004 [salt.state       :1813][INFO    ][3320] Executing state file.blockreplace for [/etc/environment]
2019-03-27 20:36:36,006 [salt.state       :300 ][INFO    ][3320] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2019-03-27 20:36:36,006 [salt.state       :1951][INFO    ][3320] Completed state [/etc/environment] at time 20:36:36.006468 duration_in_ms=1.902
2019-03-27 20:36:36,006 [salt.state       :1780][INFO    ][3320] Running state [/etc/profile.d] at time 20:36:36.006614
2019-03-27 20:36:36,006 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/profile.d]
2019-03-27 20:36:36,014 [salt.state       :300 ][INFO    ][3320] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2019-03-27 20:36:36,014 [salt.state       :1951][INFO    ][3320] Completed state [/etc/profile.d] at time 20:36:36.014237 duration_in_ms=7.624
2019-03-27 20:36:36,014 [salt.state       :1780][INFO    ][3320] Running state [/etc/bash.bashrc] at time 20:36:36.014370
2019-03-27 20:36:36,014 [salt.state       :1813][INFO    ][3320] Executing state file.blockreplace for [/etc/bash.bashrc]
2019-03-27 20:36:37,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['git', '--version'] in directory '/root'
2019-03-27 20:36:37,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2019-03-27 20:36:37,620 [salt.state       :300 ][INFO    ][3320] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-03-27 20:36:37,621 [salt.state       :1951][INFO    ][3320] Completed state [/etc/bash.bashrc] at time 20:36:37.621070 duration_in_ms=1606.7
2019-03-27 20:36:37,621 [salt.state       :1780][INFO    ][3320] Running state [/etc/profile] at time 20:36:37.621248
2019-03-27 20:36:37,621 [salt.state       :1813][INFO    ][3320] Executing state file.blockreplace for [/etc/profile]
2019-03-27 20:36:37,624 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'test -f /etc/profile' in directory '/root'
2019-03-27 20:36:37,629 [salt.state       :300 ][INFO    ][3320] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-03-27 20:36:37,630 [salt.state       :1951][INFO    ][3320] Completed state [/etc/profile] at time 20:36:37.630114 duration_in_ms=8.866
2019-03-27 20:36:37,630 [salt.state       :1780][INFO    ][3320] Running state [/etc/login.defs] at time 20:36:37.630279
2019-03-27 20:36:37,630 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/login.defs]
2019-03-27 20:36:37,648 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2019-03-27 20:36:37,713 [salt.state       :300 ][INFO    ][3320] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2019-03-27 20:36:37,714 [salt.state       :1951][INFO    ][3320] Completed state [/etc/login.defs] at time 20:36:37.714244 duration_in_ms=83.964
2019-03-27 20:36:37,718 [salt.state       :1780][INFO    ][3320] Running state [at] at time 20:36:37.718648
2019-03-27 20:36:37,718 [salt.state       :1813][INFO    ][3320] Executing state pkg.installed for [at]
2019-03-27 20:36:37,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:36:38,405 [salt.state       :300 ][INFO    ][3320] All specified packages are already installed
2019-03-27 20:36:38,406 [salt.state       :1951][INFO    ][3320] Completed state [at] at time 20:36:38.406058 duration_in_ms=687.408
2019-03-27 20:36:38,417 [salt.state       :1780][INFO    ][3320] Running state [atd] at time 20:36:38.417478
2019-03-27 20:36:38,417 [salt.state       :1813][INFO    ][3320] Executing state service.running for [atd]
2019-03-27 20:36:38,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2019-03-27 20:36:38,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2019-03-27 20:36:38,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2019-03-27 20:36:38,445 [salt.state       :300 ][INFO    ][3320] The service atd is already running
2019-03-27 20:36:38,445 [salt.state       :1951][INFO    ][3320] Completed state [atd] at time 20:36:38.445701 duration_in_ms=28.224
2019-03-27 20:36:38,447 [salt.state       :1780][INFO    ][3320] Running state [cron] at time 20:36:38.447032
2019-03-27 20:36:38,447 [salt.state       :1813][INFO    ][3320] Executing state pkg.installed for [cron]
2019-03-27 20:36:38,452 [salt.state       :300 ][INFO    ][3320] All specified packages are already installed
2019-03-27 20:36:38,452 [salt.state       :1951][INFO    ][3320] Completed state [cron] at time 20:36:38.452356 duration_in_ms=5.324
2019-03-27 20:36:38,452 [salt.state       :1780][INFO    ][3320] Running state [/etc/at.allow] at time 20:36:38.452960
2019-03-27 20:36:38,453 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/at.allow]
2019-03-27 20:36:38,464 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2019-03-27 20:36:38,470 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:36:38,471 [salt.state       :1951][INFO    ][3320] Completed state [/etc/at.allow] at time 20:36:38.471007 duration_in_ms=18.047
2019-03-27 20:36:38,471 [salt.state       :1780][INFO    ][3320] Running state [/etc/at.deny] at time 20:36:38.471156
2019-03-27 20:36:38,471 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/at.deny]
2019-03-27 20:36:38,471 [salt.state       :300 ][INFO    ][3320] {'removed': '/etc/at.deny'}
2019-03-27 20:36:38,471 [salt.state       :1951][INFO    ][3320] Completed state [/etc/at.deny] at time 20:36:38.471693 duration_in_ms=0.537
2019-03-27 20:36:38,472 [salt.state       :1780][INFO    ][3320] Running state [cron] at time 20:36:38.472386
2019-03-27 20:36:38,472 [salt.state       :1813][INFO    ][3320] Executing state service.running for [cron]
2019-03-27 20:36:38,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2019-03-27 20:36:38,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2019-03-27 20:36:38,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2019-03-27 20:36:38,493 [salt.state       :300 ][INFO    ][3320] The service cron is already running
2019-03-27 20:36:38,493 [salt.state       :1951][INFO    ][3320] Completed state [cron] at time 20:36:38.493198 duration_in_ms=20.811
2019-03-27 20:36:38,493 [salt.state       :1780][INFO    ][3320] Running state [/etc/cron.allow] at time 20:36:38.493942
2019-03-27 20:36:38,494 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/cron.allow]
2019-03-27 20:36:38,507 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:36:38,507 [salt.state       :1951][INFO    ][3320] Completed state [/etc/cron.allow] at time 20:36:38.507660 duration_in_ms=13.718
2019-03-27 20:36:38,507 [salt.state       :1780][INFO    ][3320] Running state [/etc/cron.deny] at time 20:36:38.507805
2019-03-27 20:36:38,507 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/cron.deny]
2019-03-27 20:36:38,508 [salt.state       :300 ][INFO    ][3320] File /etc/cron.deny is not present
2019-03-27 20:36:38,508 [salt.state       :1951][INFO    ][3320] Completed state [/etc/cron.deny] at time 20:36:38.508255 duration_in_ms=0.45
2019-03-27 20:36:38,508 [salt.state       :1780][INFO    ][3320] Running state [/etc/crontab] at time 20:36:38.508853
2019-03-27 20:36:38,509 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/crontab]
2019-03-27 20:36:38,509 [salt.state       :300 ][INFO    ][3320] {'mode': '0600'}
2019-03-27 20:36:38,509 [salt.state       :1951][INFO    ][3320] Completed state [/etc/crontab] at time 20:36:38.509593 duration_in_ms=0.74
2019-03-27 20:36:38,510 [salt.state       :1780][INFO    ][3320] Running state [/etc/cron.d] at time 20:36:38.510194
2019-03-27 20:36:38,510 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/cron.d]
2019-03-27 20:36:38,511 [salt.state       :300 ][INFO    ][3320] {'mode': '0600'}
2019-03-27 20:36:38,511 [salt.state       :1951][INFO    ][3320] Completed state [/etc/cron.d] at time 20:36:38.511113 duration_in_ms=0.919
2019-03-27 20:36:38,511 [salt.state       :1780][INFO    ][3320] Running state [/etc/cron.daily] at time 20:36:38.511715
2019-03-27 20:36:38,511 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/cron.daily]
2019-03-27 20:36:38,522 [salt.state       :300 ][INFO    ][3320] {'mode': '0600'}
2019-03-27 20:36:38,522 [salt.state       :1951][INFO    ][3320] Completed state [/etc/cron.daily] at time 20:36:38.522811 duration_in_ms=11.095
2019-03-27 20:36:38,523 [salt.state       :1780][INFO    ][3320] Running state [/etc/cron.hourly] at time 20:36:38.523454
2019-03-27 20:36:38,523 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/cron.hourly]
2019-03-27 20:36:38,524 [salt.state       :300 ][INFO    ][3320] {'mode': '0600'}
2019-03-27 20:36:38,524 [salt.state       :1951][INFO    ][3320] Completed state [/etc/cron.hourly] at time 20:36:38.524372 duration_in_ms=0.919
2019-03-27 20:36:38,524 [salt.state       :1780][INFO    ][3320] Running state [/etc/cron.monthly] at time 20:36:38.524973
2019-03-27 20:36:38,525 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/cron.monthly]
2019-03-27 20:36:38,525 [salt.state       :300 ][INFO    ][3320] {'mode': '0600'}
2019-03-27 20:36:38,525 [salt.state       :1951][INFO    ][3320] Completed state [/etc/cron.monthly] at time 20:36:38.525886 duration_in_ms=0.912
2019-03-27 20:36:38,526 [salt.state       :1780][INFO    ][3320] Running state [/etc/cron.weekly] at time 20:36:38.526498
2019-03-27 20:36:38,526 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/cron.weekly]
2019-03-27 20:36:38,527 [salt.state       :300 ][INFO    ][3320] {'mode': '0600'}
2019-03-27 20:36:38,527 [salt.state       :1951][INFO    ][3320] Completed state [/etc/cron.weekly] at time 20:36:38.527444 duration_in_ms=0.946
2019-03-27 20:36:38,529 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 20:36:38.529486
2019-03-27 20:36:38,529 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2019-03-27 20:36:38,540 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2019-03-27 20:36:38,546 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:36:38,546 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 20:36:38.546836 duration_in_ms=17.35
2019-03-27 20:36:38,547 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 20:36:38.546985
2019-03-27 20:36:38,547 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2019-03-27 20:36:38,559 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:36:38,559 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 20:36:38.559591 duration_in_ms=12.606
2019-03-27 20:36:38,560 [salt.state       :1780][INFO    ][3320] Running state [linux_repo_prereq_pkgs] at time 20:36:38.560617
2019-03-27 20:36:38,560 [salt.state       :1813][INFO    ][3320] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2019-03-27 20:36:38,565 [salt.state       :300 ][INFO    ][3320] All specified packages are already installed
2019-03-27 20:36:38,565 [salt.state       :1951][INFO    ][3320] Completed state [linux_repo_prereq_pkgs] at time 20:36:38.565962 duration_in_ms=5.344
2019-03-27 20:36:38,566 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 20:36:38.566104
2019-03-27 20:36:38,566 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2019-03-27 20:36:38,566 [salt.state       :300 ][INFO    ][3320] File /etc/apt/apt.conf.d/99proxies-salt is not present
2019-03-27 20:36:38,566 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 20:36:38.566536 duration_in_ms=0.431
2019-03-27 20:36:38,566 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu-arm] at time 20:36:38.566665
2019-03-27 20:36:38,566 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu-arm]
2019-03-27 20:36:38,567 [salt.state       :300 ][INFO    ][3320] File /etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu-arm is not present
2019-03-27 20:36:38,567 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu-arm] at time 20:36:38.567100 duration_in_ms=0.434
2019-03-27 20:36:38,567 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/preferences.d/fdio-ubuntu-arm] at time 20:36:38.567229
2019-03-27 20:36:38,567 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/preferences.d/fdio-ubuntu-arm]
2019-03-27 20:36:38,567 [salt.state       :300 ][INFO    ][3320] File /etc/apt/preferences.d/fdio-ubuntu-arm is not present
2019-03-27 20:36:38,567 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/preferences.d/fdio-ubuntu-arm] at time 20:36:38.567640 duration_in_ms=0.411
2019-03-27 20:36:38,569 [salt.state       :1780][INFO    ][3320] Running state [deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu-arm.xenial.main/ ./] at time 20:36:38.569385
2019-03-27 20:36:38,569 [salt.state       :1813][INFO    ][3320] Executing state pkgrepo.managed for [deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu-arm.xenial.main/ ./]
2019-03-27 20:36:38,637 [salt.state       :300 ][INFO    ][3320] Package repo 'deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu-arm.xenial.main/ ./' already configured
2019-03-27 20:36:38,638 [salt.state       :1951][INFO    ][3320] Completed state [deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu-arm.xenial.main/ ./] at time 20:36:38.638083 duration_in_ms=68.698
2019-03-27 20:36:38,638 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 20:36:38.638225
2019-03-27 20:36:38,638 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2019-03-27 20:36:38,638 [salt.state       :300 ][INFO    ][3320] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2019-03-27 20:36:38,638 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 20:36:38.638662 duration_in_ms=0.436
2019-03-27 20:36:38,638 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 20:36:38.638791
2019-03-27 20:36:38,638 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/preferences.d/mirantis_openstack]
2019-03-27 20:36:38,639 [salt.state       :300 ][INFO    ][3320] File /etc/apt/preferences.d/mirantis_openstack is not present
2019-03-27 20:36:38,639 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 20:36:38.639236 duration_in_ms=0.444
2019-03-27 20:36:38,639 [salt.state       :1780][INFO    ][3320] Running state [echo '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' | base64 -d | apt-key add -] at time 20:36:38.639382
2019-03-27 20:36:38,639 [salt.state       :1813][INFO    ][3320] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-03-27 20:36:38,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-03-27 20:36:38,861 [salt.state       :300 ][INFO    ][3320] {'pid': 3433, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-03-27 20:36:38,861 [salt.state       :1951][INFO    ][3320] Completed state [echo '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' | base64 -d | apt-key add -] at time 20:36:38.861703 duration_in_ms=222.321
2019-03-27 20:36:38,864 [salt.state       :1780][INFO    ][3320] Running state [deb http://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main] at time 20:36:38.864229
2019-03-27 20:36:38,864 [salt.state       :1813][INFO    ][3320] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main]
2019-03-27 20:36:38,982 [salt.state       :300 ][INFO    ][3320] Configured package repo 'deb http://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main'
2019-03-27 20:36:38,982 [salt.state       :1951][INFO    ][3320] Completed state [deb http://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial main] at time 20:36:38.982362 duration_in_ms=118.133
2019-03-27 20:36:38,982 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu] at time 20:36:38.982521
2019-03-27 20:36:38,982 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu]
2019-03-27 20:36:38,982 [salt.state       :300 ][INFO    ][3320] File /etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu is not present
2019-03-27 20:36:38,983 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/99proxies-salt-fdio-ubuntu] at time 20:36:38.983051 duration_in_ms=0.53
2019-03-27 20:36:38,983 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/preferences.d/fdio-ubuntu] at time 20:36:38.983190
2019-03-27 20:36:38,983 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/apt/preferences.d/fdio-ubuntu]
2019-03-27 20:36:39,059 [salt.state       :300 ][INFO    ][3320] File /etc/apt/preferences.d/fdio-ubuntu is in the correct state
2019-03-27 20:36:39,059 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/preferences.d/fdio-ubuntu] at time 20:36:39.059856 duration_in_ms=76.666
2019-03-27 20:36:39,061 [salt.state       :1780][INFO    ][3320] Running state [deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./] at time 20:36:39.061349
2019-03-27 20:36:39,061 [salt.state       :1813][INFO    ][3320] Executing state pkgrepo.managed for [deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./]
2019-03-27 20:36:39,082 [salt.state       :300 ][INFO    ][3320] Package repo 'deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./' already configured
2019-03-27 20:36:39,082 [salt.state       :1951][INFO    ][3320] Completed state [deb [trusted=yes] http://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./] at time 20:36:39.082919 duration_in_ms=21.57
2019-03-27 20:36:39,083 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/99proxies-salt-networking-vpp] at time 20:36:39.083072
2019-03-27 20:36:39,083 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-networking-vpp]
2019-03-27 20:36:39,083 [salt.state       :300 ][INFO    ][3320] File /etc/apt/apt.conf.d/99proxies-salt-networking-vpp is not present
2019-03-27 20:36:39,083 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/99proxies-salt-networking-vpp] at time 20:36:39.083506 duration_in_ms=0.433
2019-03-27 20:36:39,083 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/preferences.d/networking-vpp] at time 20:36:39.083636
2019-03-27 20:36:39,083 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/preferences.d/networking-vpp]
2019-03-27 20:36:39,083 [salt.state       :300 ][INFO    ][3320] File /etc/apt/preferences.d/networking-vpp is not present
2019-03-27 20:36:39,084 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/preferences.d/networking-vpp] at time 20:36:39.084054 duration_in_ms=0.417
2019-03-27 20:36:39,084 [salt.state       :1780][INFO    ][3320] Running state [echo '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' | base64 -d | apt-key add -] at time 20:36:39.084190
2019-03-27 20:36:39,084 [salt.state       :1813][INFO    ][3320] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2019-03-27 20:36:39,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2019-03-27 20:36:39,173 [salt.state       :300 ][INFO    ][3320] {'pid': 3549, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2019-03-27 20:36:39,173 [salt.state       :1951][INFO    ][3320] Completed state [echo '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' | base64 -d | apt-key add -] at time 20:36:39.173281 duration_in_ms=89.09
2019-03-27 20:36:39,175 [salt.state       :1780][INFO    ][3320] Running state [deb http://ppa.launchpad.net/opnfv-fuel/networking-vpp/ubuntu xenial main] at time 20:36:39.175757
2019-03-27 20:36:39,175 [salt.state       :1813][INFO    ][3320] Executing state pkgrepo.managed for [deb http://ppa.launchpad.net/opnfv-fuel/networking-vpp/ubuntu xenial main]
2019-03-27 20:36:39,199 [salt.state       :300 ][INFO    ][3320] Package repo 'deb http://ppa.launchpad.net/opnfv-fuel/networking-vpp/ubuntu xenial main' already configured
2019-03-27 20:36:39,199 [salt.state       :1951][INFO    ][3320] Completed state [deb http://ppa.launchpad.net/opnfv-fuel/networking-vpp/ubuntu xenial main] at time 20:36:39.199136 duration_in_ms=23.38
2019-03-27 20:36:39,199 [salt.state       :1780][INFO    ][3320] Running state [pkg.refresh_db] at time 20:36:39.199284
2019-03-27 20:36:39,199 [salt.state       :1813][INFO    ][3320] Executing state module.run for [pkg.refresh_db]
2019-03-27 20:36:39,199 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:36:39,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-03-27 20:36:43,176 [salt.state       :300 ][INFO    ][3320] {'ret': {'https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main ./ InRelease': False, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://mirror.mirantis.com/nightly//openstack-rocky//xenial xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-security InRelease': None, 'https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main ./ Release.gpg': False, 'https://nexus.fd.io/content/repositories/fd.io.ubuntu-arm.xenial.main ./ Release.gpg': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'https://nexus.fd.io/content/repositories/fd.io.ubuntu-arm.xenial.main ./ InRelease': False, 'http://ppa.launchpad.net/opnfv-fuel/networking-vpp/ubuntu xenial InRelease': None}}
2019-03-27 20:36:43,177 [salt.state       :1951][INFO    ][3320] Completed state [pkg.refresh_db] at time 20:36:43.177330 duration_in_ms=3978.046
2019-03-27 20:36:43,177 [salt.state       :1780][INFO    ][3320] Running state [linux_extra_packages_removed] at time 20:36:43.177586
2019-03-27 20:36:43,177 [salt.state       :1813][INFO    ][3320] Executing state pkg.removed for [linux_extra_packages_removed]
2019-03-27 20:36:43,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2019-03-27 20:36:44,381 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command saltutil.find_job with jid 20190327203644368560
2019-03-27 20:36:44,390 [salt.minion      :1432][INFO    ][4033] Starting a new job with PID 4033
2019-03-27 20:36:44,401 [salt.minion      :1711][INFO    ][4033] Returning information for job: 20190327203644368560
2019-03-27 20:36:47,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:36:47,075 [salt.state       :300 ][INFO    ][3320] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2019-03-27 20:36:47,114 [salt.state       :915 ][INFO    ][3320] Loading fresh modules for state activity
2019-03-27 20:36:47,135 [salt.state       :1951][INFO    ][3320] Completed state [linux_extra_packages_removed] at time 20:36:47.135707 duration_in_ms=3958.12
2019-03-27 20:36:47,139 [salt.state       :1780][INFO    ][3320] Running state [linux_extra_packages_latest] at time 20:36:47.139583
2019-03-27 20:36:47,139 [salt.state       :1813][INFO    ][3320] Executing state pkg.latest for [linux_extra_packages_latest]
2019-03-27 20:36:47,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['apt-cache', '-q', 'policy', 'smartmontools'] in directory '/root'
2019-03-27 20:36:47,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-03-27 20:36:47,616 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'smartmontools'] in directory '/root'
2019-03-27 20:36:52,883 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:36:52,909 [salt.state       :300 ][INFO    ][3320] Made the following changes:
'mail-reader' changed from 'absent' to '1'
'smartmontools' changed from 'absent' to '6.4+svn4214-1'
'mailx' changed from 'absent' to '1'
'imap-client' changed from 'absent' to '1'
's-nail' changed from 'absent' to '14.8.6-1'

2019-03-27 20:36:52,918 [salt.state       :915 ][INFO    ][3320] Loading fresh modules for state activity
2019-03-27 20:36:52,939 [salt.state       :1951][INFO    ][3320] Completed state [linux_extra_packages_latest] at time 20:36:52.938964 duration_in_ms=5799.381
2019-03-27 20:36:52,941 [salt.state       :1780][INFO    ][3320] Running state [UTC] at time 20:36:52.941612
2019-03-27 20:36:52,941 [salt.state       :1813][INFO    ][3320] Executing state timezone.system for [UTC]
2019-03-27 20:36:52,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['timedatectl'] in directory '/root'
2019-03-27 20:36:53,051 [salt.state       :300 ][INFO    ][3320] Timezone UTC already set, UTC already set to UTC
2019-03-27 20:36:53,051 [salt.state       :1951][INFO    ][3320] Completed state [UTC] at time 20:36:53.051371 duration_in_ms=109.759
2019-03-27 20:36:53,053 [salt.state       :1780][INFO    ][3320] Running state [/etc/default/grub.d] at time 20:36:53.053232
2019-03-27 20:36:53,053 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/default/grub.d]
2019-03-27 20:36:53,056 [salt.state       :300 ][INFO    ][3320] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2019-03-27 20:36:53,056 [salt.state       :1951][INFO    ][3320] Completed state [/etc/default/grub.d] at time 20:36:53.056274 duration_in_ms=3.043
2019-03-27 20:36:53,059 [salt.state       :1780][INFO    ][3320] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 20:36:53.059652
2019-03-27 20:36:53,059 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2019-03-27 20:36:53,081 [salt.state       :300 ][INFO    ][3320] File /etc/default/grub.d/99-custom-settings.cfg is in the correct state
2019-03-27 20:36:53,081 [salt.state       :1951][INFO    ][3320] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 20:36:53.081964 duration_in_ms=22.312
2019-03-27 20:36:53,082 [salt.state       :1780][INFO    ][3320] Running state [/etc/default/grub.d/90-hugepages.cfg] at time 20:36:53.082738
2019-03-27 20:36:53,082 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/default/grub.d/90-hugepages.cfg]
2019-03-27 20:36:53,099 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/files/grub_hugepages'
2019-03-27 20:36:53,164 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:36:53,164 [salt.state       :1951][INFO    ][3320] Completed state [/etc/default/grub.d/90-hugepages.cfg] at time 20:36:53.164475 duration_in_ms=81.737
2019-03-27 20:36:53,165 [salt.state       :1780][INFO    ][3320] Running state [update-grub] at time 20:36:53.165596
2019-03-27 20:36:53,165 [salt.state       :1813][INFO    ][3320] Executing state cmd.wait for [update-grub]
2019-03-27 20:36:53,165 [salt.state       :300 ][INFO    ][3320] No changes made for update-grub
2019-03-27 20:36:53,166 [salt.state       :1951][INFO    ][3320] Completed state [update-grub] at time 20:36:53.166040 duration_in_ms=0.444
2019-03-27 20:36:53,166 [salt.state       :1780][INFO    ][3320] Running state [update-grub] at time 20:36:53.166152
2019-03-27 20:36:53,166 [salt.state       :1813][INFO    ][3320] Executing state cmd.mod_watch for [update-grub]
2019-03-27 20:36:53,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'update-grub' in directory '/root'
2019-03-27 20:36:53,961 [salt.state       :300 ][INFO    ][3320] {'pid': 5262, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-46-generic\nFound initrd image: /boot/initrd.img-4.15.0-46-generic\ndone', 'stdout': ''}
2019-03-27 20:36:53,961 [salt.state       :1951][INFO    ][3320] Completed state [update-grub] at time 20:36:53.961377 duration_in_ms=795.225
2019-03-27 20:36:53,962 [salt.state       :1780][INFO    ][3320] Running state [/boot/grub/grub.cfg] at time 20:36:53.962572
2019-03-27 20:36:53,962 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/boot/grub/grub.cfg]
2019-03-27 20:36:54,460 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2019-03-27 20:36:54,467 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:36:54,467 [salt.state       :300 ][INFO    ][3320] {'mode': '0400'}
2019-03-27 20:36:54,467 [salt.state       :1951][INFO    ][3320] Completed state [/boot/grub/grub.cfg] at time 20:36:54.467730 duration_in_ms=505.158
2019-03-27 20:36:54,467 [salt.state       :1780][INFO    ][3320] Running state [nf_conntrack] at time 20:36:54.467952
2019-03-27 20:36:54,468 [salt.state       :1813][INFO    ][3320] Executing state kmod.present for [nf_conntrack]
2019-03-27 20:36:54,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'lsmod' in directory '/root'
2019-03-27 20:36:54,475 [salt.state       :300 ][INFO    ][3320] Kernel module nf_conntrack is already present
2019-03-27 20:36:54,475 [salt.state       :1951][INFO    ][3320] Completed state [nf_conntrack] at time 20:36:54.475227 duration_in_ms=7.275
2019-03-27 20:36:54,475 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d] at time 20:36:54.475403
2019-03-27 20:36:54,475 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/modprobe.d]
2019-03-27 20:36:54,476 [salt.state       :300 ][INFO    ][3320] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2019-03-27 20:36:54,476 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d] at time 20:36:54.476233 duration_in_ms=0.83
2019-03-27 20:36:54,477 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/hfsplus.conf] at time 20:36:54.477430
2019-03-27 20:36:54,477 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2019-03-27 20:36:54,569 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/hfsplus.conf is in the correct state
2019-03-27 20:36:54,569 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/hfsplus.conf] at time 20:36:54.569445 duration_in_ms=92.014
2019-03-27 20:36:54,570 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/rds.conf] at time 20:36:54.570187
2019-03-27 20:36:54,570 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2019-03-27 20:36:54,728 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/rds.conf is in the correct state
2019-03-27 20:36:54,728 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/rds.conf] at time 20:36:54.728286 duration_in_ms=158.098
2019-03-27 20:36:54,729 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/cramfs.conf] at time 20:36:54.729188
2019-03-27 20:36:54,729 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2019-03-27 20:36:54,809 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/cramfs.conf is in the correct state
2019-03-27 20:36:54,809 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/cramfs.conf] at time 20:36:54.809925 duration_in_ms=80.736
2019-03-27 20:36:54,810 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/freevxfs.conf] at time 20:36:54.810689
2019-03-27 20:36:54,810 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2019-03-27 20:36:54,889 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/freevxfs.conf is in the correct state
2019-03-27 20:36:54,889 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/freevxfs.conf] at time 20:36:54.889733 duration_in_ms=79.045
2019-03-27 20:36:54,890 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/hfs.conf] at time 20:36:54.890496
2019-03-27 20:36:54,890 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2019-03-27 20:36:54,969 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/hfs.conf is in the correct state
2019-03-27 20:36:54,969 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/hfs.conf] at time 20:36:54.969916 duration_in_ms=79.419
2019-03-27 20:36:54,970 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/squashfs.conf] at time 20:36:54.970682
2019-03-27 20:36:54,970 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2019-03-27 20:36:55,049 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/squashfs.conf is in the correct state
2019-03-27 20:36:55,049 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/squashfs.conf] at time 20:36:55.049154 duration_in_ms=78.472
2019-03-27 20:36:55,049 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/udf.conf] at time 20:36:55.049918
2019-03-27 20:36:55,050 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2019-03-27 20:36:55,129 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/udf.conf is in the correct state
2019-03-27 20:36:55,130 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/udf.conf] at time 20:36:55.130042 duration_in_ms=80.125
2019-03-27 20:36:55,130 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/vfat.conf] at time 20:36:55.130804
2019-03-27 20:36:55,130 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2019-03-27 20:36:55,209 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/vfat.conf is in the correct state
2019-03-27 20:36:55,209 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/vfat.conf] at time 20:36:55.209664 duration_in_ms=78.861
2019-03-27 20:36:55,210 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/sctp.conf] at time 20:36:55.210427
2019-03-27 20:36:55,210 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2019-03-27 20:36:55,289 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/sctp.conf is in the correct state
2019-03-27 20:36:55,289 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/sctp.conf] at time 20:36:55.289186 duration_in_ms=78.759
2019-03-27 20:36:55,289 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/jffs2.conf] at time 20:36:55.289945
2019-03-27 20:36:55,290 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2019-03-27 20:36:55,369 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/jffs2.conf is in the correct state
2019-03-27 20:36:55,369 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/jffs2.conf] at time 20:36:55.369610 duration_in_ms=79.665
2019-03-27 20:36:55,370 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/tipc.conf] at time 20:36:55.370375
2019-03-27 20:36:55,370 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2019-03-27 20:36:55,448 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/tipc.conf is in the correct state
2019-03-27 20:36:55,449 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/tipc.conf] at time 20:36:55.449068 duration_in_ms=78.694
2019-03-27 20:36:55,449 [salt.state       :1780][INFO    ][3320] Running state [/etc/modprobe.d/dccp.conf] at time 20:36:55.449827
2019-03-27 20:36:55,450 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2019-03-27 20:36:55,529 [salt.state       :300 ][INFO    ][3320] File /etc/modprobe.d/dccp.conf is in the correct state
2019-03-27 20:36:55,529 [salt.state       :1951][INFO    ][3320] Completed state [/etc/modprobe.d/dccp.conf] at time 20:36:55.529970 duration_in_ms=80.142
2019-03-27 20:36:55,530 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_congestion_control] at time 20:36:55.530112
2019-03-27 20:36:55,530 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2019-03-27 20:36:55,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_congestion_control' in directory '/root'
2019-03-27 20:36:55,537 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_congestion_control = yeah is already set
2019-03-27 20:36:55,537 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_congestion_control] at time 20:36:55.537421 duration_in_ms=7.309
2019-03-27 20:36:55,537 [salt.state       :1780][INFO    ][3320] Running state [net.core.netdev_budget] at time 20:36:55.537617
2019-03-27 20:36:55,537 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.core.netdev_budget]
2019-03-27 20:36:55,538 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.core.netdev_budget' in directory '/root'
2019-03-27 20:36:55,543 [salt.state       :300 ][INFO    ][3320] Sysctl value net.core.netdev_budget = 600 is already set
2019-03-27 20:36:55,543 [salt.state       :1951][INFO    ][3320] Completed state [net.core.netdev_budget] at time 20:36:55.543336 duration_in_ms=5.719
2019-03-27 20:36:55,543 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_slow_start_after_idle] at time 20:36:55.543526
2019-03-27 20:36:55,543 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2019-03-27 20:36:55,544 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_slow_start_after_idle' in directory '/root'
2019-03-27 20:36:55,550 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_slow_start_after_idle = 0 is already set
2019-03-27 20:36:55,550 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 20:36:55.550411 duration_in_ms=6.885
2019-03-27 20:36:55,550 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 20:36:55.550626
2019-03-27 20:36:55,550 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2019-03-27 20:36:55,551 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.icmp_echo_ignore_broadcasts' in directory '/root'
2019-03-27 20:36:55,557 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.icmp_echo_ignore_broadcasts = 1 is already set
2019-03-27 20:36:55,557 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 20:36:55.557472 duration_in_ms=6.846
2019-03-27 20:36:55,557 [salt.state       :1780][INFO    ][3320] Running state [net.nf_conntrack_max] at time 20:36:55.557667
2019-03-27 20:36:55,557 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.nf_conntrack_max]
2019-03-27 20:36:55,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.nf_conntrack_max' in directory '/root'
2019-03-27 20:36:55,564 [salt.state       :300 ][INFO    ][3320] Sysctl value net.nf_conntrack_max = 1048576 is already set
2019-03-27 20:36:55,564 [salt.state       :1951][INFO    ][3320] Completed state [net.nf_conntrack_max] at time 20:36:55.564560 duration_in_ms=6.893
2019-03-27 20:36:55,564 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 20:36:55.564753
2019-03-27 20:36:55,564 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2019-03-27 20:36:55,565 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.icmp_ignore_bogus_error_responses' in directory '/root'
2019-03-27 20:36:55,572 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.icmp_ignore_bogus_error_responses = 1 is already set
2019-03-27 20:36:55,572 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 20:36:55.572448 duration_in_ms=7.696
2019-03-27 20:36:55,572 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.default.log_martians] at time 20:36:55.572646
2019-03-27 20:36:55,572 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2019-03-27 20:36:55,573 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.default.log_martians' in directory '/root'
2019-03-27 20:36:55,579 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.default.log_martians = 1 is already set
2019-03-27 20:36:55,579 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.default.log_martians] at time 20:36:55.579419 duration_in_ms=6.772
2019-03-27 20:36:55,579 [salt.state       :1780][INFO    ][3320] Running state [net.core.somaxconn] at time 20:36:55.579611
2019-03-27 20:36:55,579 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.core.somaxconn]
2019-03-27 20:36:55,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.core.somaxconn' in directory '/root'
2019-03-27 20:36:55,584 [salt.state       :300 ][INFO    ][3320] Sysctl value net.core.somaxconn = 4096 is already set
2019-03-27 20:36:55,584 [salt.state       :1951][INFO    ][3320] Completed state [net.core.somaxconn] at time 20:36:55.584900 duration_in_ms=5.288
2019-03-27 20:36:55,585 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.all.send_redirects] at time 20:36:55.585090
2019-03-27 20:36:55,585 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2019-03-27 20:36:55,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.all.send_redirects' in directory '/root'
2019-03-27 20:36:55,590 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.all.send_redirects = 0 is already set
2019-03-27 20:36:55,590 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.all.send_redirects] at time 20:36:55.590523 duration_in_ms=5.433
2019-03-27 20:36:55,590 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_tw_reuse] at time 20:36:55.590713
2019-03-27 20:36:55,590 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2019-03-27 20:36:55,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_tw_reuse' in directory '/root'
2019-03-27 20:36:55,597 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_tw_reuse = 1 is already set
2019-03-27 20:36:55,597 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_tw_reuse] at time 20:36:55.597408 duration_in_ms=6.695
2019-03-27 20:36:55,597 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.default.rp_filter] at time 20:36:55.597621
2019-03-27 20:36:55,597 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2019-03-27 20:36:55,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.default.rp_filter' in directory '/root'
2019-03-27 20:36:55,605 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.default.rp_filter = 1 is already set
2019-03-27 20:36:55,605 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.default.rp_filter] at time 20:36:55.605294 duration_in_ms=7.673
2019-03-27 20:36:55,605 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_fin_timeout] at time 20:36:55.605511
2019-03-27 20:36:55,605 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2019-03-27 20:36:55,606 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_fin_timeout' in directory '/root'
2019-03-27 20:36:55,612 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_fin_timeout = 30 is already set
2019-03-27 20:36:55,612 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_fin_timeout] at time 20:36:55.612398 duration_in_ms=6.886
2019-03-27 20:36:55,612 [salt.state       :1780][INFO    ][3320] Running state [net.core.netdev_budget_usecs] at time 20:36:55.612589
2019-03-27 20:36:55,612 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.core.netdev_budget_usecs]
2019-03-27 20:36:55,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.core.netdev_budget_usecs' in directory '/root'
2019-03-27 20:36:55,618 [salt.state       :300 ][INFO    ][3320] Sysctl value net.core.netdev_budget_usecs = 5000 is already set
2019-03-27 20:36:55,618 [salt.state       :1951][INFO    ][3320] Completed state [net.core.netdev_budget_usecs] at time 20:36:55.618206 duration_in_ms=5.617
2019-03-27 20:36:55,618 [salt.state       :1780][INFO    ][3320] Running state [kernel.panic] at time 20:36:55.618391
2019-03-27 20:36:55,618 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [kernel.panic]
2019-03-27 20:36:55,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n kernel.panic' in directory '/root'
2019-03-27 20:36:55,623 [salt.state       :300 ][INFO    ][3320] Sysctl value kernel.panic = 60 is already set
2019-03-27 20:36:55,623 [salt.state       :1951][INFO    ][3320] Completed state [kernel.panic] at time 20:36:55.623896 duration_in_ms=5.504
2019-03-27 20:36:55,624 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_keepalive_probes] at time 20:36:55.624087
2019-03-27 20:36:55,624 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2019-03-27 20:36:55,624 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_keepalive_probes' in directory '/root'
2019-03-27 20:36:55,630 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_keepalive_probes = 8 is already set
2019-03-27 20:36:55,630 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_keepalive_probes] at time 20:36:55.630482 duration_in_ms=6.394
2019-03-27 20:36:55,630 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.all.log_martians] at time 20:36:55.630696
2019-03-27 20:36:55,630 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2019-03-27 20:36:55,631 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.all.log_martians' in directory '/root'
2019-03-27 20:36:55,637 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.all.log_martians = 1 is already set
2019-03-27 20:36:55,637 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.all.log_martians] at time 20:36:55.637235 duration_in_ms=6.539
2019-03-27 20:36:55,637 [salt.state       :1780][INFO    ][3320] Running state [fs.suid_dumpable] at time 20:36:55.637423
2019-03-27 20:36:55,637 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [fs.suid_dumpable]
2019-03-27 20:36:55,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n fs.suid_dumpable' in directory '/root'
2019-03-27 20:36:55,644 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2019-03-27 20:36:55,650 [salt.state       :300 ][INFO    ][3320] {'fs.suid_dumpable': 0}
2019-03-27 20:36:55,650 [salt.state       :1951][INFO    ][3320] Completed state [fs.suid_dumpable] at time 20:36:55.650496 duration_in_ms=13.073
2019-03-27 20:36:55,650 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.default.accept_redirects] at time 20:36:55.650682
2019-03-27 20:36:55,650 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2019-03-27 20:36:55,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.default.accept_redirects' in directory '/root'
2019-03-27 20:36:55,655 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.default.accept_redirects = 0 is already set
2019-03-27 20:36:55,656 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.default.accept_redirects] at time 20:36:55.656073 duration_in_ms=5.391
2019-03-27 20:36:55,656 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.default.secure_redirects] at time 20:36:55.656265
2019-03-27 20:36:55,656 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2019-03-27 20:36:55,656 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.default.secure_redirects' in directory '/root'
2019-03-27 20:36:55,663 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.default.secure_redirects = 0 is already set
2019-03-27 20:36:55,663 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.default.secure_redirects] at time 20:36:55.663322 duration_in_ms=7.057
2019-03-27 20:36:55,663 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.default.accept_source_route] at time 20:36:55.663519
2019-03-27 20:36:55,663 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2019-03-27 20:36:55,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.default.accept_source_route' in directory '/root'
2019-03-27 20:36:55,670 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.default.accept_source_route = 0 is already set
2019-03-27 20:36:55,670 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.default.accept_source_route] at time 20:36:55.670322 duration_in_ms=6.802
2019-03-27 20:36:55,670 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_keepalive_intvl] at time 20:36:55.670517
2019-03-27 20:36:55,670 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2019-03-27 20:36:55,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_keepalive_intvl' in directory '/root'
2019-03-27 20:36:55,677 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_keepalive_intvl = 3 is already set
2019-03-27 20:36:55,677 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_keepalive_intvl] at time 20:36:55.677228 duration_in_ms=6.711
2019-03-27 20:36:55,677 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_keepalive_time] at time 20:36:55.677424
2019-03-27 20:36:55,677 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2019-03-27 20:36:55,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_keepalive_time' in directory '/root'
2019-03-27 20:36:55,684 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_keepalive_time = 30 is already set
2019-03-27 20:36:55,684 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_keepalive_time] at time 20:36:55.684286 duration_in_ms=6.862
2019-03-27 20:36:55,684 [salt.state       :1780][INFO    ][3320] Running state [kernel.randomize_va_space] at time 20:36:55.684470
2019-03-27 20:36:55,684 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [kernel.randomize_va_space]
2019-03-27 20:36:55,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n kernel.randomize_va_space' in directory '/root'
2019-03-27 20:36:55,689 [salt.state       :300 ][INFO    ][3320] Sysctl value kernel.randomize_va_space = 2 is already set
2019-03-27 20:36:55,690 [salt.state       :1951][INFO    ][3320] Completed state [kernel.randomize_va_space] at time 20:36:55.690027 duration_in_ms=5.557
2019-03-27 20:36:55,690 [salt.state       :1780][INFO    ][3320] Running state [fs.file-max] at time 20:36:55.690216
2019-03-27 20:36:55,690 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [fs.file-max]
2019-03-27 20:36:55,690 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n fs.file-max' in directory '/root'
2019-03-27 20:36:55,696 [salt.state       :300 ][INFO    ][3320] Sysctl value fs.file-max = 124165 is already set
2019-03-27 20:36:55,696 [salt.state       :1951][INFO    ][3320] Completed state [fs.file-max] at time 20:36:55.696900 duration_in_ms=6.684
2019-03-27 20:36:55,697 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_syncookies] at time 20:36:55.697095
2019-03-27 20:36:55,697 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2019-03-27 20:36:55,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_syncookies' in directory '/root'
2019-03-27 20:36:55,704 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_syncookies = 1 is already set
2019-03-27 20:36:55,704 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_syncookies] at time 20:36:55.704869 duration_in_ms=7.775
2019-03-27 20:36:55,705 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_max_syn_backlog] at time 20:36:55.705086
2019-03-27 20:36:55,705 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2019-03-27 20:36:55,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_max_syn_backlog' in directory '/root'
2019-03-27 20:36:55,711 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_max_syn_backlog = 8192 is already set
2019-03-27 20:36:55,712 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_max_syn_backlog] at time 20:36:55.712076 duration_in_ms=6.989
2019-03-27 20:36:55,712 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.all.rp_filter] at time 20:36:55.712271
2019-03-27 20:36:55,712 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2019-03-27 20:36:55,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.all.rp_filter' in directory '/root'
2019-03-27 20:36:55,717 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.all.rp_filter = 1 is already set
2019-03-27 20:36:55,717 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.all.rp_filter] at time 20:36:55.717911 duration_in_ms=5.641
2019-03-27 20:36:55,718 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.all.accept_source_route] at time 20:36:55.718110
2019-03-27 20:36:55,718 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2019-03-27 20:36:55,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.all.accept_source_route' in directory '/root'
2019-03-27 20:36:55,724 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.all.accept_source_route = 0 is already set
2019-03-27 20:36:55,724 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.all.accept_source_route] at time 20:36:55.724460 duration_in_ms=6.349
2019-03-27 20:36:55,724 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.tcp_retries2] at time 20:36:55.724653
2019-03-27 20:36:55,724 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2019-03-27 20:36:55,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.tcp_retries2' in directory '/root'
2019-03-27 20:36:55,730 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.tcp_retries2 = 5 is already set
2019-03-27 20:36:55,731 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.tcp_retries2] at time 20:36:55.731073 duration_in_ms=6.421
2019-03-27 20:36:55,731 [salt.state       :1780][INFO    ][3320] Running state [net.core.netdev_max_backlog] at time 20:36:55.731268
2019-03-27 20:36:55,731 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.core.netdev_max_backlog]
2019-03-27 20:36:55,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.core.netdev_max_backlog' in directory '/root'
2019-03-27 20:36:55,737 [salt.state       :300 ][INFO    ][3320] Sysctl value net.core.netdev_max_backlog = 261144 is already set
2019-03-27 20:36:55,737 [salt.state       :1951][INFO    ][3320] Completed state [net.core.netdev_max_backlog] at time 20:36:55.737644 duration_in_ms=6.375
2019-03-27 20:36:55,737 [salt.state       :1780][INFO    ][3320] Running state [vm.swappiness] at time 20:36:55.737830
2019-03-27 20:36:55,738 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [vm.swappiness]
2019-03-27 20:36:55,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n vm.swappiness' in directory '/root'
2019-03-27 20:36:55,744 [salt.state       :300 ][INFO    ][3320] Sysctl value vm.swappiness = 10 is already set
2019-03-27 20:36:55,744 [salt.state       :1951][INFO    ][3320] Completed state [vm.swappiness] at time 20:36:55.744830 duration_in_ms=7.001
2019-03-27 20:36:55,745 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.all.secure_redirects] at time 20:36:55.745024
2019-03-27 20:36:55,745 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2019-03-27 20:36:55,745 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.all.secure_redirects' in directory '/root'
2019-03-27 20:36:55,751 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.all.secure_redirects = 0 is already set
2019-03-27 20:36:55,751 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.all.secure_redirects] at time 20:36:55.751683 duration_in_ms=6.658
2019-03-27 20:36:55,751 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.neigh.default.gc_thresh1] at time 20:36:55.751872
2019-03-27 20:36:55,752 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2019-03-27 20:36:55,752 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh1' in directory '/root'
2019-03-27 20:36:55,757 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.neigh.default.gc_thresh1 = 4096 is already set
2019-03-27 20:36:55,757 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 20:36:55.757616 duration_in_ms=5.744
2019-03-27 20:36:55,757 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.neigh.default.gc_thresh2] at time 20:36:55.757807
2019-03-27 20:36:55,757 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2019-03-27 20:36:55,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh2' in directory '/root'
2019-03-27 20:36:55,764 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.neigh.default.gc_thresh2 = 8192 is already set
2019-03-27 20:36:55,764 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 20:36:55.764665 duration_in_ms=6.859
2019-03-27 20:36:55,764 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.neigh.default.gc_thresh3] at time 20:36:55.764862
2019-03-27 20:36:55,765 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2019-03-27 20:36:55,765 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh3' in directory '/root'
2019-03-27 20:36:55,772 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.neigh.default.gc_thresh3 = 16384 is already set
2019-03-27 20:36:55,772 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 20:36:55.772671 duration_in_ms=7.809
2019-03-27 20:36:55,772 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.default.send_redirects] at time 20:36:55.772869
2019-03-27 20:36:55,773 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2019-03-27 20:36:55,773 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.default.send_redirects' in directory '/root'
2019-03-27 20:36:55,779 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.default.send_redirects = 0 is already set
2019-03-27 20:36:55,779 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.default.send_redirects] at time 20:36:55.779508 duration_in_ms=6.639
2019-03-27 20:36:55,779 [salt.state       :1780][INFO    ][3320] Running state [net.ipv4.conf.all.accept_redirects] at time 20:36:55.779701
2019-03-27 20:36:55,779 [salt.state       :1813][INFO    ][3320] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2019-03-27 20:36:55,780 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl -n net.ipv4.conf.all.accept_redirects' in directory '/root'
2019-03-27 20:36:55,786 [salt.state       :300 ][INFO    ][3320] Sysctl value net.ipv4.conf.all.accept_redirects = 0 is already set
2019-03-27 20:36:55,786 [salt.state       :1951][INFO    ][3320] Completed state [net.ipv4.conf.all.accept_redirects] at time 20:36:55.786307 duration_in_ms=6.607
2019-03-27 20:36:55,786 [salt.state       :1780][INFO    ][3320] Running state [/mnt/hugepages_2M] at time 20:36:55.786512
2019-03-27 20:36:55,786 [salt.state       :1813][INFO    ][3320] Executing state mount.mounted for [/mnt/hugepages_2M]
2019-03-27 20:36:55,787 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -l' in directory '/root'
2019-03-27 20:36:55,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'blkid' in directory '/root'
2019-03-27 20:36:55,827 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -o mode=775,pagesize=2M -t hugetlbfs Hugetlbfs-kvm-2m /mnt/hugepages_2M' in directory '/root'
2019-03-27 20:36:55,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -l' in directory '/root'
2019-03-27 20:36:55,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'blkid' in directory '/root'
2019-03-27 20:36:55,852 [salt.state       :300 ][INFO    ][3320] {'mount': True, 'persist': 'new'}
2019-03-27 20:36:55,852 [salt.state       :1951][INFO    ][3320] Completed state [/mnt/hugepages_2M] at time 20:36:55.852637 duration_in_ms=66.125
2019-03-27 20:36:55,852 [salt.state       :1780][INFO    ][3320] Running state [sysctl vm.nr_hugepages=8192] at time 20:36:55.852846
2019-03-27 20:36:55,853 [salt.state       :1813][INFO    ][3320] Executing state cmd.run for [sysctl vm.nr_hugepages=8192]
2019-03-27 20:36:55,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl vm.nr_hugepages | grep -qE '8192'' in directory '/root'
2019-03-27 20:36:55,859 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'sysctl vm.nr_hugepages=8192' in directory '/root'
2019-03-27 20:36:55,910 [salt.state       :300 ][INFO    ][3320] {'pid': 5728, 'retcode': 0, 'stderr': '', 'stdout': 'vm.nr_hugepages = 8192'}
2019-03-27 20:36:55,911 [salt.state       :1951][INFO    ][3320] Completed state [sysctl vm.nr_hugepages=8192] at time 20:36:55.911014 duration_in_ms=58.166
2019-03-27 20:36:55,911 [salt.state       :1780][INFO    ][3320] Running state [systemctl mask dev-hugepages.mount] at time 20:36:55.911283
2019-03-27 20:36:55,911 [salt.state       :1813][INFO    ][3320] Executing state cmd.run for [systemctl mask dev-hugepages.mount]
2019-03-27 20:36:55,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'systemctl mask dev-hugepages.mount' in directory '/root'
2019-03-27 20:36:56,077 [salt.state       :300 ][INFO    ][3320] {'pid': 5730, 'retcode': 0, 'stderr': 'Created symlink from /etc/systemd/system/dev-hugepages.mount to /dev/null.', 'stdout': ''}
2019-03-27 20:36:56,078 [salt.state       :1951][INFO    ][3320] Completed state [systemctl mask dev-hugepages.mount] at time 20:36:56.078236 duration_in_ms=166.953
2019-03-27 20:36:56,078 [salt.state       :1780][INFO    ][3320] Running state [linux_sysfs_package] at time 20:36:56.078489
2019-03-27 20:36:56,078 [salt.state       :1813][INFO    ][3320] Executing state pkg.installed for [linux_sysfs_package]
2019-03-27 20:36:56,093 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2019-03-27 20:36:56,144 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-03-27 20:36:59,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-03-27 20:36:59,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2019-03-27 20:37:04,240 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:37:04,283 [salt.state       :300 ][INFO    ][3320] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2019-03-27 20:37:04,293 [salt.state       :915 ][INFO    ][3320] Loading fresh modules for state activity
2019-03-27 20:37:04,315 [salt.state       :1951][INFO    ][3320] Completed state [linux_sysfs_package] at time 20:37:04.315696 duration_in_ms=8237.205
2019-03-27 20:37:04,319 [salt.state       :1780][INFO    ][3320] Running state [/etc/sysfs.d] at time 20:37:04.319307
2019-03-27 20:37:04,319 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/etc/sysfs.d]
2019-03-27 20:37:04,322 [salt.state       :300 ][INFO    ][3320] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2019-03-27 20:37:04,322 [salt.state       :1951][INFO    ][3320] Completed state [/etc/sysfs.d] at time 20:37:04.322435 duration_in_ms=3.129
2019-03-27 20:37:04,663 [salt.state       :1780][INFO    ][3320] Running state [ondemand] at time 20:37:04.663768
2019-03-27 20:37:04,664 [salt.state       :1813][INFO    ][3320] Executing state service.dead for [ondemand]
2019-03-27 20:37:04,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2019-03-27 20:37:04,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-03-27 20:37:04,691 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-03-27 20:37:04,709 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2019-03-27 20:37:04,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-03-27 20:37:04,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-03-27 20:37:04,787 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-03-27 20:37:04,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2019-03-27 20:37:04,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-03-27 20:37:04,985 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'runlevel' in directory '/root'
2019-03-27 20:37:04,995 [salt.state       :300 ][INFO    ][3320] {'ondemand': True}
2019-03-27 20:37:04,995 [salt.state       :1951][INFO    ][3320] Completed state [ondemand] at time 20:37:04.995246 duration_in_ms=331.479
2019-03-27 20:37:04,997 [salt.state       :1780][INFO    ][3320] Running state [/etc/sysfs.d/governor.conf] at time 20:37:04.997077
2019-03-27 20:37:04,997 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/sysfs.d/governor.conf]
2019-03-27 20:37:05,014 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/files/governor.conf.jinja'
2019-03-27 20:37:05,026 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:37:05,026 [salt.state       :1951][INFO    ][3320] Completed state [/etc/sysfs.d/governor.conf] at time 20:37:05.026755 duration_in_ms=29.678
2019-03-27 20:37:05,027 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.027685
2019-03-27 20:37:05,027 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,028 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,071 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,071 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.071492 duration_in_ms=43.806
2019-03-27 20:37:05,071 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.071882
2019-03-27 20:37:05,072 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,072 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,099 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,099 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.099502 duration_in_ms=27.62
2019-03-27 20:37:05,099 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.099897
2019-03-27 20:37:05,100 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,100 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,115 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,115 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.115524 duration_in_ms=15.627
2019-03-27 20:37:05,115 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.115924
2019-03-27 20:37:05,116 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,116 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,131 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,131 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.131375 duration_in_ms=15.452
2019-03-27 20:37:05,131 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.131567
2019-03-27 20:37:05,131 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,132 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,151 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,151 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.151529 duration_in_ms=19.962
2019-03-27 20:37:05,151 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.151818
2019-03-27 20:37:05,152 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,152 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,163 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,163 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.163506 duration_in_ms=11.688
2019-03-27 20:37:05,163 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.163854
2019-03-27 20:37:05,164 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,164 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,179 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,179 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.179523 duration_in_ms=15.669
2019-03-27 20:37:05,179 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.179920
2019-03-27 20:37:05,180 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,180 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,195 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,195 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.195502 duration_in_ms=15.582
2019-03-27 20:37:05,195 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.195893
2019-03-27 20:37:05,196 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,196 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,215 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,215 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.215524 duration_in_ms=19.63
2019-03-27 20:37:05,216 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.215936
2019-03-27 20:37:05,216 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,216 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,239 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,239 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.239524 duration_in_ms=23.588
2019-03-27 20:37:05,239 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.239918
2019-03-27 20:37:05,240 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,240 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,255 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,255 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.255524 duration_in_ms=15.605
2019-03-27 20:37:05,255 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.255920
2019-03-27 20:37:05,256 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,256 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,271 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,271 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.271239 duration_in_ms=15.32
2019-03-27 20:37:05,271 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.271433
2019-03-27 20:37:05,271 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,271 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,295 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,295 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.295330 duration_in_ms=23.896
2019-03-27 20:37:05,295 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.295523
2019-03-27 20:37:05,295 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,295 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,311 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,311 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.311343 duration_in_ms=15.82
2019-03-27 20:37:05,311 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.311536
2019-03-27 20:37:05,311 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,311 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,327 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,327 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.327295 duration_in_ms=15.758
2019-03-27 20:37:05,327 [salt.state       :1780][INFO    ][3320] Running state [sysfs.write] at time 20:37:05.327487
2019-03-27 20:37:05,327 [salt.state       :1813][INFO    ][3320] Executing state module.run for [sysfs.write]
2019-03-27 20:37:05,327 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,343 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,343 [salt.state       :1951][INFO    ][3320] Completed state [sysfs.write] at time 20:37:05.343254 duration_in_ms=15.768
2019-03-27 20:37:05,343 [salt.state       :1780][INFO    ][3320] Running state [en_US.UTF-8] at time 20:37:05.343726
2019-03-27 20:37:05,343 [salt.state       :1813][INFO    ][3320] Executing state locale.present for [en_US.UTF-8]
2019-03-27 20:37:05,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'locale -a' in directory '/root'
2019-03-27 20:37:05,350 [salt.state       :300 ][INFO    ][3320] Locale en_US.UTF-8 is already present
2019-03-27 20:37:05,351 [salt.state       :1951][INFO    ][3320] Completed state [en_US.UTF-8] at time 20:37:05.350998 duration_in_ms=7.272
2019-03-27 20:37:05,352 [salt.state       :1780][INFO    ][3320] Running state [en_US.UTF-8] at time 20:37:05.352369
2019-03-27 20:37:05,352 [salt.state       :1813][INFO    ][3320] Executing state locale.system for [en_US.UTF-8]
2019-03-27 20:37:05,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'localectl' in directory '/root'
2019-03-27 20:37:05,436 [salt.state       :300 ][INFO    ][3320] System locale en_US.UTF-8 already set
2019-03-27 20:37:05,436 [salt.state       :1951][INFO    ][3320] Completed state [en_US.UTF-8] at time 20:37:05.436911 duration_in_ms=84.542
2019-03-27 20:37:05,437 [salt.state       :1780][INFO    ][3320] Running state [root] at time 20:37:05.437686
2019-03-27 20:37:05,437 [salt.state       :1813][INFO    ][3320] Executing state group.present for [root]
2019-03-27 20:37:05,438 [salt.state       :300 ][INFO    ][3320] Group root is present and up to date
2019-03-27 20:37:05,438 [salt.state       :1951][INFO    ][3320] Completed state [root] at time 20:37:05.438435 duration_in_ms=0.749
2019-03-27 20:37:05,440 [salt.state       :1780][INFO    ][3320] Running state [root] at time 20:37:05.440117
2019-03-27 20:37:05,440 [salt.state       :1813][INFO    ][3320] Executing state user.present for [root]
2019-03-27 20:37:05,444 [salt.state       :300 ][INFO    ][3320] User root is present and up to date
2019-03-27 20:37:05,444 [salt.state       :1951][INFO    ][3320] Completed state [root] at time 20:37:05.444685 duration_in_ms=4.567
2019-03-27 20:37:05,445 [salt.state       :1780][INFO    ][3320] Running state [/root] at time 20:37:05.445654
2019-03-27 20:37:05,445 [salt.state       :1813][INFO    ][3320] Executing state file.directory for [/root]
2019-03-27 20:37:05,446 [salt.state       :300 ][INFO    ][3320] Directory /root is in the correct state
Directory /root updated
2019-03-27 20:37:05,446 [salt.state       :1951][INFO    ][3320] Completed state [/root] at time 20:37:05.446605 duration_in_ms=0.952
2019-03-27 20:37:05,446 [salt.state       :1780][INFO    ][3320] Running state [/etc/sudoers.d/90-salt-user-root] at time 20:37:05.446789
2019-03-27 20:37:05,447 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2019-03-27 20:37:05,452 [salt.state       :300 ][INFO    ][3320] File /etc/sudoers.d/90-salt-user-root is not present
2019-03-27 20:37:05,452 [salt.state       :1951][INFO    ][3320] Completed state [/etc/sudoers.d/90-salt-user-root] at time 20:37:05.452954 duration_in_ms=6.166
2019-03-27 20:37:05,453 [salt.state       :1780][INFO    ][3320] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 20:37:05.453145
2019-03-27 20:37:05,453 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2019-03-27 20:37:05,475 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2019-03-27 20:37:05,545 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:37:05,545 [salt.state       :1951][INFO    ][3320] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 20:37:05.545861 duration_in_ms=92.715
2019-03-27 20:37:05,546 [salt.state       :1780][INFO    ][3320] Running state [/etc/security/limits.d/90-salt-default.conf] at time 20:37:05.546027
2019-03-27 20:37:05,546 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2019-03-27 20:37:05,616 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:37:05,616 [salt.state       :1951][INFO    ][3320] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 20:37:05.616507 duration_in_ms=70.479
2019-03-27 20:37:05,616 [salt.state       :1780][INFO    ][3320] Running state [autofs] at time 20:37:05.616659
2019-03-27 20:37:05,616 [salt.state       :1813][INFO    ][3320] Executing state service.disabled for [autofs]
2019-03-27 20:37:05,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2019-03-27 20:37:05,625 [salt.state       :300 ][INFO    ][3320] The named service autofs is not available
2019-03-27 20:37:05,626 [salt.state       :1951][INFO    ][3320] Completed state [autofs] at time 20:37:05.626002 duration_in_ms=9.343
2019-03-27 20:37:05,626 [salt.state       :1780][INFO    ][3320] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 20:37:05.626198
2019-03-27 20:37:05,626 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2019-03-27 20:37:05,640 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2019-03-27 20:37:05,702 [salt.state       :300 ][INFO    ][3320] File changed:
New file
2019-03-27 20:37:05,702 [salt.state       :1951][INFO    ][3320] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 20:37:05.702685 duration_in_ms=76.488
2019-03-27 20:37:05,703 [salt.state       :1780][INFO    ][3320] Running state [service.systemctl_reload] at time 20:37:05.703775
2019-03-27 20:37:05,703 [salt.state       :1813][INFO    ][3320] Executing state module.wait for [service.systemctl_reload]
2019-03-27 20:37:05,704 [salt.state       :300 ][INFO    ][3320] No changes made for service.systemctl_reload
2019-03-27 20:37:05,704 [salt.state       :1951][INFO    ][3320] Completed state [service.systemctl_reload] at time 20:37:05.704207 duration_in_ms=0.432
2019-03-27 20:37:05,704 [salt.state       :1780][INFO    ][3320] Running state [service.systemctl_reload] at time 20:37:05.704319
2019-03-27 20:37:05,704 [salt.state       :1813][INFO    ][3320] Executing state module.mod_watch for [service.systemctl_reload]
2019-03-27 20:37:05,704 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:05,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2019-03-27 20:37:05,787 [salt.state       :300 ][INFO    ][3320] {'ret': True}
2019-03-27 20:37:05,787 [salt.state       :1951][INFO    ][3320] Completed state [service.systemctl_reload] at time 20:37:05.787952 duration_in_ms=83.633
2019-03-27 20:37:05,788 [salt.state       :1780][INFO    ][3320] Running state [/etc/shadow] at time 20:37:05.788174
2019-03-27 20:37:05,788 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/shadow]
2019-03-27 20:37:05,788 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,789 [salt.state       :300 ][INFO    ][3320] File /etc/shadow exists with proper permissions. No changes made.
2019-03-27 20:37:05,789 [salt.state       :1951][INFO    ][3320] Completed state [/etc/shadow] at time 20:37:05.789173 duration_in_ms=1.0
2019-03-27 20:37:05,789 [salt.state       :1780][INFO    ][3320] Running state [/etc/gshadow] at time 20:37:05.789319
2019-03-27 20:37:05,789 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/gshadow]
2019-03-27 20:37:05,789 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,790 [salt.state       :300 ][INFO    ][3320] File /etc/gshadow exists with proper permissions. No changes made.
2019-03-27 20:37:05,790 [salt.state       :1951][INFO    ][3320] Completed state [/etc/gshadow] at time 20:37:05.790106 duration_in_ms=0.788
2019-03-27 20:37:05,790 [salt.state       :1780][INFO    ][3320] Running state [/etc/group-] at time 20:37:05.790247
2019-03-27 20:37:05,790 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/group-]
2019-03-27 20:37:05,790 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,790 [salt.state       :300 ][INFO    ][3320] File /etc/group- exists with proper permissions. No changes made.
2019-03-27 20:37:05,791 [salt.state       :1951][INFO    ][3320] Completed state [/etc/group-] at time 20:37:05.791031 duration_in_ms=0.784
2019-03-27 20:37:05,791 [salt.state       :1780][INFO    ][3320] Running state [/etc/group] at time 20:37:05.791178
2019-03-27 20:37:05,791 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/group]
2019-03-27 20:37:05,791 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,791 [salt.state       :300 ][INFO    ][3320] File /etc/group exists with proper permissions. No changes made.
2019-03-27 20:37:05,791 [salt.state       :1951][INFO    ][3320] Completed state [/etc/group] at time 20:37:05.791916 duration_in_ms=0.738
2019-03-27 20:37:05,792 [salt.state       :1780][INFO    ][3320] Running state [/etc/passwd-] at time 20:37:05.792048
2019-03-27 20:37:05,792 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/passwd-]
2019-03-27 20:37:05,792 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,792 [salt.state       :300 ][INFO    ][3320] File /etc/passwd- exists with proper permissions. No changes made.
2019-03-27 20:37:05,792 [salt.state       :1951][INFO    ][3320] Completed state [/etc/passwd-] at time 20:37:05.792792 duration_in_ms=0.745
2019-03-27 20:37:05,792 [salt.state       :1780][INFO    ][3320] Running state [/etc/passwd] at time 20:37:05.792925
2019-03-27 20:37:05,793 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/passwd]
2019-03-27 20:37:05,793 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,793 [salt.state       :300 ][INFO    ][3320] File /etc/passwd exists with proper permissions. No changes made.
2019-03-27 20:37:05,793 [salt.state       :1951][INFO    ][3320] Completed state [/etc/passwd] at time 20:37:05.793659 duration_in_ms=0.734
2019-03-27 20:37:05,793 [salt.state       :1780][INFO    ][3320] Running state [/etc/gshadow-] at time 20:37:05.793795
2019-03-27 20:37:05,793 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/gshadow-]
2019-03-27 20:37:05,794 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,794 [salt.state       :300 ][INFO    ][3320] File /etc/gshadow- exists with proper permissions. No changes made.
2019-03-27 20:37:05,794 [salt.state       :1951][INFO    ][3320] Completed state [/etc/gshadow-] at time 20:37:05.794551 duration_in_ms=0.755
2019-03-27 20:37:05,794 [salt.state       :1780][INFO    ][3320] Running state [/etc/shadow-] at time 20:37:05.794683
2019-03-27 20:37:05,794 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/shadow-]
2019-03-27 20:37:05,795 [salt.loaded.int.states.file:2298][WARNING ][3320] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-03-27 20:37:05,795 [salt.state       :300 ][INFO    ][3320] File /etc/shadow- exists with proper permissions. No changes made.
2019-03-27 20:37:05,795 [salt.state       :1951][INFO    ][3320] Completed state [/etc/shadow-] at time 20:37:05.795444 duration_in_ms=0.761
2019-03-27 20:37:05,795 [salt.state       :1780][INFO    ][3320] Running state [/etc/issue] at time 20:37:05.795586
2019-03-27 20:37:05,795 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/issue]
2019-03-27 20:37:05,806 [salt.state       :300 ][INFO    ][3320] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.6 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2019-03-27 20:37:05,807 [salt.state       :1951][INFO    ][3320] Completed state [/etc/issue] at time 20:37:05.806971 duration_in_ms=11.384
2019-03-27 20:37:05,807 [salt.state       :1780][INFO    ][3320] Running state [/etc/hostname] at time 20:37:05.807151
2019-03-27 20:37:05,807 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/hostname]
2019-03-27 20:37:05,827 [salt.state       :300 ][INFO    ][3320] File /etc/hostname is in the correct state
2019-03-27 20:37:05,827 [salt.state       :1951][INFO    ][3320] Completed state [/etc/hostname] at time 20:37:05.827386 duration_in_ms=20.235
2019-03-27 20:37:05,828 [salt.state       :1780][INFO    ][3320] Running state [hostname gtw01] at time 20:37:05.828866
2019-03-27 20:37:05,829 [salt.state       :1813][INFO    ][3320] Executing state cmd.run for [hostname gtw01]
2019-03-27 20:37:05,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'test "$(hostname)" = "gtw01"' in directory '/root'
2019-03-27 20:37:05,840 [salt.state       :300 ][INFO    ][3320] unless execution succeeded
2019-03-27 20:37:05,840 [salt.state       :1951][INFO    ][3320] Completed state [hostname gtw01] at time 20:37:05.840901 duration_in_ms=12.035
2019-03-27 20:37:05,841 [salt.state       :1780][INFO    ][3320] Running state [cmp002] at time 20:37:05.841614
2019-03-27 20:37:05,841 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cmp002]
2019-03-27 20:37:05,842 [salt.state       :300 ][INFO    ][3320] Host cmp002 (10.167.4.56) already present
2019-03-27 20:37:05,842 [salt.state       :1951][INFO    ][3320] Completed state [cmp002] at time 20:37:05.842254 duration_in_ms=0.64
2019-03-27 20:37:05,842 [salt.state       :1780][INFO    ][3320] Running state [cmp002.mcp-fdio-noha.local] at time 20:37:05.842499
2019-03-27 20:37:05,842 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cmp002.mcp-fdio-noha.local]
2019-03-27 20:37:05,842 [salt.state       :300 ][INFO    ][3320] Host cmp002.mcp-fdio-noha.local (10.167.4.56) already present
2019-03-27 20:37:05,843 [salt.state       :1951][INFO    ][3320] Completed state [cmp002.mcp-fdio-noha.local] at time 20:37:05.843045 duration_in_ms=0.546
2019-03-27 20:37:05,843 [salt.state       :1780][INFO    ][3320] Running state [cmp001] at time 20:37:05.843304
2019-03-27 20:37:05,843 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cmp001]
2019-03-27 20:37:05,843 [salt.state       :300 ][INFO    ][3320] Host cmp001 (10.167.4.55) already present
2019-03-27 20:37:05,843 [salt.state       :1951][INFO    ][3320] Completed state [cmp001] at time 20:37:05.843812 duration_in_ms=0.507
2019-03-27 20:37:05,844 [salt.state       :1780][INFO    ][3320] Running state [cmp001.mcp-fdio-noha.local] at time 20:37:05.844052
2019-03-27 20:37:05,844 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cmp001.mcp-fdio-noha.local]
2019-03-27 20:37:05,844 [salt.state       :300 ][INFO    ][3320] Host cmp001.mcp-fdio-noha.local (10.167.4.55) already present
2019-03-27 20:37:05,844 [salt.state       :1951][INFO    ][3320] Completed state [cmp001.mcp-fdio-noha.local] at time 20:37:05.844544 duration_in_ms=0.493
2019-03-27 20:37:05,844 [salt.state       :1780][INFO    ][3320] Running state [cfg] at time 20:37:05.844780
2019-03-27 20:37:05,844 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cfg]
2019-03-27 20:37:05,845 [salt.state       :300 ][INFO    ][3320] Host cfg (10.167.4.11) already present
2019-03-27 20:37:05,845 [salt.state       :1951][INFO    ][3320] Completed state [cfg] at time 20:37:05.845287 duration_in_ms=0.507
2019-03-27 20:37:05,845 [salt.state       :1780][INFO    ][3320] Running state [cfg.mcp-fdio-noha.local] at time 20:37:05.845526
2019-03-27 20:37:05,845 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cfg.mcp-fdio-noha.local]
2019-03-27 20:37:05,845 [salt.state       :300 ][INFO    ][3320] Host cfg.mcp-fdio-noha.local (10.167.4.11) already present
2019-03-27 20:37:05,846 [salt.state       :1951][INFO    ][3320] Completed state [cfg.mcp-fdio-noha.local] at time 20:37:05.846030 duration_in_ms=0.504
2019-03-27 20:37:05,846 [salt.state       :1780][INFO    ][3320] Running state [mas01] at time 20:37:05.846273
2019-03-27 20:37:05,846 [salt.state       :1813][INFO    ][3320] Executing state host.present for [mas01]
2019-03-27 20:37:05,846 [salt.state       :300 ][INFO    ][3320] Host mas01 (10.167.4.12) already present
2019-03-27 20:37:05,846 [salt.state       :1951][INFO    ][3320] Completed state [mas01] at time 20:37:05.846766 duration_in_ms=0.492
2019-03-27 20:37:05,847 [salt.state       :1780][INFO    ][3320] Running state [mas01.mcp-fdio-noha.local] at time 20:37:05.847030
2019-03-27 20:37:05,847 [salt.state       :1813][INFO    ][3320] Executing state host.present for [mas01.mcp-fdio-noha.local]
2019-03-27 20:37:05,847 [salt.state       :300 ][INFO    ][3320] Host mas01.mcp-fdio-noha.local (10.167.4.12) already present
2019-03-27 20:37:05,847 [salt.state       :1951][INFO    ][3320] Completed state [mas01.mcp-fdio-noha.local] at time 20:37:05.847562 duration_in_ms=0.531
2019-03-27 20:37:05,847 [salt.state       :1780][INFO    ][3320] Running state [gtw01] at time 20:37:05.847801
2019-03-27 20:37:05,847 [salt.state       :1813][INFO    ][3320] Executing state host.present for [gtw01]
2019-03-27 20:37:05,848 [salt.state       :300 ][INFO    ][3320] Host gtw01 (10.167.4.16) already present
2019-03-27 20:37:05,848 [salt.state       :1951][INFO    ][3320] Completed state [gtw01] at time 20:37:05.848295 duration_in_ms=0.494
2019-03-27 20:37:05,848 [salt.state       :1780][INFO    ][3320] Running state [gtw01.mcp-fdio-noha.local] at time 20:37:05.848534
2019-03-27 20:37:05,848 [salt.state       :1813][INFO    ][3320] Executing state host.present for [gtw01.mcp-fdio-noha.local]
2019-03-27 20:37:05,848 [salt.state       :300 ][INFO    ][3320] Host gtw01.mcp-fdio-noha.local (10.167.4.16) already present
2019-03-27 20:37:05,849 [salt.state       :1951][INFO    ][3320] Completed state [gtw01.mcp-fdio-noha.local] at time 20:37:05.849034 duration_in_ms=0.499
2019-03-27 20:37:05,850 [salt.state       :1780][INFO    ][3320] Running state [file.replace] at time 20:37:05.850009
2019-03-27 20:37:05,850 [salt.state       :1813][INFO    ][3320] Executing state module.run for [file.replace]
2019-03-27 20:37:06,083 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'grep -q "gtw01 gtw01.mcp-fdio-noha.local" /etc/hosts' in directory '/root'
2019-03-27 20:37:06,090 [salt.utils.decorators:613 ][WARNING ][3320] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-03-27 20:37:06,092 [salt.state       :300 ][INFO    ][3320] {'ret': '--- \n+++ \n@@ -10,5 +10,5 @@\n 10.167.4.55\t\tcmp001 cmp001.mcp-fdio-noha.local\n 10.167.4.11\t\tcfg cfg.mcp-fdio-noha.local cfg01 cfg01.mcp-fdio-noha.local\n 10.167.4.12\t\tmas01 mas01.mcp-fdio-noha.local\n-10.167.4.16\t\tgtw01 gtw01.mcp-fdio-noha.local\n+10.167.4.16\t\tgtw01.mcp-fdio-noha.local gtw01\n 10.167.4.36\t\tctl01 ctl01.mcp-fdio-noha.local ctl ctl.mcp-fdio-noha.local\n'}
2019-03-27 20:37:06,092 [salt.state       :1951][INFO    ][3320] Completed state [file.replace] at time 20:37:06.092573 duration_in_ms=242.564
2019-03-27 20:37:06,093 [salt.state       :1780][INFO    ][3320] Running state [ctl01] at time 20:37:06.092981
2019-03-27 20:37:06,093 [salt.state       :1813][INFO    ][3320] Executing state host.present for [ctl01]
2019-03-27 20:37:06,093 [salt.state       :300 ][INFO    ][3320] Host ctl01 (10.167.4.36) already present
2019-03-27 20:37:06,093 [salt.state       :1951][INFO    ][3320] Completed state [ctl01] at time 20:37:06.093554 duration_in_ms=0.574
2019-03-27 20:37:06,093 [salt.state       :1780][INFO    ][3320] Running state [ctl01.mcp-fdio-noha.local] at time 20:37:06.093806
2019-03-27 20:37:06,093 [salt.state       :1813][INFO    ][3320] Executing state host.present for [ctl01.mcp-fdio-noha.local]
2019-03-27 20:37:06,094 [salt.state       :300 ][INFO    ][3320] Host ctl01.mcp-fdio-noha.local (10.167.4.36) already present
2019-03-27 20:37:06,094 [salt.state       :1951][INFO    ][3320] Completed state [ctl01.mcp-fdio-noha.local] at time 20:37:06.094313 duration_in_ms=0.507
2019-03-27 20:37:06,094 [salt.state       :1780][INFO    ][3320] Running state [ctl] at time 20:37:06.094562
2019-03-27 20:37:06,094 [salt.state       :1813][INFO    ][3320] Executing state host.present for [ctl]
2019-03-27 20:37:06,095 [salt.state       :300 ][INFO    ][3320] Host ctl (10.167.4.36) already present
2019-03-27 20:37:06,095 [salt.state       :1951][INFO    ][3320] Completed state [ctl] at time 20:37:06.095112 duration_in_ms=0.55
2019-03-27 20:37:06,095 [salt.state       :1780][INFO    ][3320] Running state [ctl.mcp-fdio-noha.local] at time 20:37:06.095354
2019-03-27 20:37:06,095 [salt.state       :1813][INFO    ][3320] Executing state host.present for [ctl.mcp-fdio-noha.local]
2019-03-27 20:37:06,095 [salt.state       :300 ][INFO    ][3320] Host ctl.mcp-fdio-noha.local (10.167.4.36) already present
2019-03-27 20:37:06,095 [salt.state       :1951][INFO    ][3320] Completed state [ctl.mcp-fdio-noha.local] at time 20:37:06.095859 duration_in_ms=0.506
2019-03-27 20:37:06,096 [salt.state       :1780][INFO    ][3320] Running state [cfg01] at time 20:37:06.096110
2019-03-27 20:37:06,096 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cfg01]
2019-03-27 20:37:06,096 [salt.state       :300 ][INFO    ][3320] Host cfg01 (10.167.4.11) already present
2019-03-27 20:37:06,096 [salt.state       :1951][INFO    ][3320] Completed state [cfg01] at time 20:37:06.096625 duration_in_ms=0.515
2019-03-27 20:37:06,096 [salt.state       :1780][INFO    ][3320] Running state [cfg01.mcp-fdio-noha.local] at time 20:37:06.096872
2019-03-27 20:37:06,097 [salt.state       :1813][INFO    ][3320] Executing state host.present for [cfg01.mcp-fdio-noha.local]
2019-03-27 20:37:06,097 [salt.state       :300 ][INFO    ][3320] Host cfg01.mcp-fdio-noha.local (10.167.4.11) already present
2019-03-27 20:37:06,097 [salt.state       :1951][INFO    ][3320] Completed state [cfg01.mcp-fdio-noha.local] at time 20:37:06.097368 duration_in_ms=0.496
2019-03-27 20:37:06,097 [salt.state       :1780][INFO    ][3320] Running state [linux_dpdk_pkgs] at time 20:37:06.097505
2019-03-27 20:37:06,097 [salt.state       :1813][INFO    ][3320] Executing state pkg.installed for [linux_dpdk_pkgs]
2019-03-27 20:37:06,102 [salt.state       :300 ][INFO    ][3320] All specified packages are already installed
2019-03-27 20:37:06,102 [salt.state       :1951][INFO    ][3320] Completed state [linux_dpdk_pkgs] at time 20:37:06.102821 duration_in_ms=5.316
2019-03-27 20:37:06,103 [salt.state       :1780][INFO    ][3320] Running state [uio] at time 20:37:06.103883
2019-03-27 20:37:06,104 [salt.state       :1813][INFO    ][3320] Executing state kmod.present for [uio]
2019-03-27 20:37:06,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'lsmod' in directory '/root'
2019-03-27 20:37:06,110 [salt.state       :300 ][INFO    ][3320] Kernel module uio is already present
2019-03-27 20:37:06,110 [salt.state       :1951][INFO    ][3320] Completed state [uio] at time 20:37:06.110897 duration_in_ms=7.014
2019-03-27 20:37:06,111 [salt.state       :1780][INFO    ][3320] Running state [/etc/dpdk/interfaces] at time 20:37:06.111939
2019-03-27 20:37:06,112 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/dpdk/interfaces]
2019-03-27 20:37:06,188 [salt.state       :300 ][INFO    ][3320] File /etc/dpdk/interfaces is in the correct state
2019-03-27 20:37:06,188 [salt.state       :1951][INFO    ][3320] Completed state [/etc/dpdk/interfaces] at time 20:37:06.188912 duration_in_ms=76.973
2019-03-27 20:37:06,190 [salt.state       :1780][INFO    ][3320] Running state [dpdk] at time 20:37:06.190395
2019-03-27 20:37:06,190 [salt.state       :1813][INFO    ][3320] Executing state service.running for [dpdk]
2019-03-27 20:37:06,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'dpdk.service', '-n', '0'] in directory '/root'
2019-03-27 20:37:06,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'dpdk.service'] in directory '/root'
2019-03-27 20:37:06,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'dpdk.service'] in directory '/root'
2019-03-27 20:37:06,212 [salt.state       :300 ][INFO    ][3320] The service dpdk is already running
2019-03-27 20:37:06,212 [salt.state       :1951][INFO    ][3320] Completed state [dpdk] at time 20:37:06.212792 duration_in_ms=22.396
2019-03-27 20:37:06,213 [salt.state       :1780][INFO    ][3320] Running state [vpp_pkgs] at time 20:37:06.212995
2019-03-27 20:37:06,213 [salt.state       :1813][INFO    ][3320] Executing state pkg.installed for [vpp_pkgs]
2019-03-27 20:37:06,218 [salt.state       :300 ][INFO    ][3320] All specified packages are already installed
2019-03-27 20:37:06,218 [salt.state       :1951][INFO    ][3320] Completed state [vpp_pkgs] at time 20:37:06.218403 duration_in_ms=5.409
2019-03-27 20:37:06,219 [salt.state       :1780][INFO    ][3320] Running state [/etc/vpp/commands.txt] at time 20:37:06.219544
2019-03-27 20:37:06,219 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/vpp/commands.txt]
2019-03-27 20:37:06,289 [salt.state       :300 ][INFO    ][3320] File /etc/vpp/commands.txt is in the correct state
2019-03-27 20:37:06,289 [salt.state       :1951][INFO    ][3320] Completed state [/etc/vpp/commands.txt] at time 20:37:06.289813 duration_in_ms=70.269
2019-03-27 20:37:06,290 [salt.state       :1780][INFO    ][3320] Running state [/etc/vpp/startup.conf] at time 20:37:06.290643
2019-03-27 20:37:06,290 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/vpp/startup.conf]
2019-03-27 20:37:06,360 [salt.state       :300 ][INFO    ][3320] File /etc/vpp/startup.conf is in the correct state
2019-03-27 20:37:06,360 [salt.state       :1951][INFO    ][3320] Completed state [/etc/vpp/startup.conf] at time 20:37:06.360948 duration_in_ms=70.306
2019-03-27 20:37:06,361 [salt.state       :1780][INFO    ][3320] Running state [/etc/sysctl.d/80-vpp.conf] at time 20:37:06.361083
2019-03-27 20:37:06,361 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/sysctl.d/80-vpp.conf]
2019-03-27 20:37:06,369 [salt.state       :300 ][INFO    ][3320] File /etc/sysctl.d/80-vpp.conf is in the correct state
2019-03-27 20:37:06,369 [salt.state       :1951][INFO    ][3320] Completed state [/etc/sysctl.d/80-vpp.conf] at time 20:37:06.369651 duration_in_ms=8.569
2019-03-27 20:37:06,371 [salt.state       :1780][INFO    ][3320] Running state [vpp] at time 20:37:06.371201
2019-03-27 20:37:06,371 [salt.state       :1813][INFO    ][3320] Executing state service.running for [vpp]
2019-03-27 20:37:06,371 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'vpp.service', '-n', '0'] in directory '/root'
2019-03-27 20:37:06,379 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'vpp.service'] in directory '/root'
2019-03-27 20:37:06,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'vpp.service'] in directory '/root'
2019-03-27 20:37:06,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'vpp.service'] in directory '/root'
2019-03-27 20:37:06,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'vpp.service'] in directory '/root'
2019-03-27 20:37:06,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'vpp.service'] in directory '/root'
2019-03-27 20:37:06,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'vpp.service'] in directory '/root'
2019-03-27 20:37:06,442 [salt.state       :300 ][INFO    ][3320] {'vpp': True}
2019-03-27 20:37:06,442 [salt.state       :1951][INFO    ][3320] Completed state [vpp] at time 20:37:06.442874 duration_in_ms=71.672
2019-03-27 20:37:06,443 [salt.state       :1780][INFO    ][3320] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 20:37:06.443191
2019-03-27 20:37:06,443 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2019-03-27 20:37:06,446 [salt.state       :300 ][INFO    ][3320] File /etc/network/interfaces.d/50-cloud-init.cfg is not present
2019-03-27 20:37:06,447 [salt.state       :1951][INFO    ][3320] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 20:37:06.447089 duration_in_ms=3.898
2019-03-27 20:37:06,447 [salt.state       :1780][INFO    ][3320] Running state [enp8s0] at time 20:37:06.447290
2019-03-27 20:37:06,447 [salt.state       :1813][INFO    ][3320] Executing state network.managed for [enp8s0]
2019-03-27 20:37:06,548 [salt.state       :300 ][INFO    ][3320] Interface enp8s0 is up to date.
2019-03-27 20:37:06,549 [salt.state       :1951][INFO    ][3320] Completed state [enp8s0] at time 20:37:06.549278 duration_in_ms=101.988
2019-03-27 20:37:06,549 [salt.state       :1780][INFO    ][3320] Running state [enp6s0] at time 20:37:06.549512
2019-03-27 20:37:06,549 [salt.state       :1813][INFO    ][3320] Executing state network.managed for [enp6s0]
2019-03-27 20:37:06,568 [salt.state       :300 ][INFO    ][3320] Interface enp6s0 is up to date.
2019-03-27 20:37:06,568 [salt.state       :1951][INFO    ][3320] Completed state [enp6s0] at time 20:37:06.568318 duration_in_ms=18.807
2019-03-27 20:37:06,570 [salt.state       :1780][INFO    ][3320] Running state [enp6s0.300] at time 20:37:06.570143
2019-03-27 20:37:06,570 [salt.state       :1813][INFO    ][3320] Executing state network.managed for [enp6s0.300]
2019-03-27 20:37:06,589 [salt.state       :300 ][INFO    ][3320] Interface enp6s0.300 is up to date.
2019-03-27 20:37:06,589 [salt.state       :1951][INFO    ][3320] Completed state [enp6s0.300] at time 20:37:06.589443 duration_in_ms=19.3
2019-03-27 20:37:06,590 [salt.state       :1780][INFO    ][3320] Running state [br-mgmt] at time 20:37:06.590550
2019-03-27 20:37:06,590 [salt.state       :1813][INFO    ][3320] Executing state network.managed for [br-mgmt]
2019-03-27 20:37:06,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-03-27 20:37:06,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'bridge-utils'] in directory '/root'
2019-03-27 20:37:06,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:37:06,984 [salt.state       :300 ][INFO    ][3320] Interface br-mgmt is up to date.
2019-03-27 20:37:06,984 [salt.state       :1951][INFO    ][3320] Completed state [br-mgmt] at time 20:37:06.984344 duration_in_ms=393.794
2019-03-27 20:37:06,985 [salt.state       :1780][INFO    ][3320] Running state [br-floating] at time 20:37:06.985788
2019-03-27 20:37:06,986 [salt.state       :1813][INFO    ][3320] Executing state network.managed for [br-floating]
2019-03-27 20:37:06,992 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-03-27 20:37:07,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'bridge-utils'] in directory '/root'
2019-03-27 20:37:07,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:37:07,339 [salt.state       :300 ][INFO    ][3320] Interface br-floating is up to date.
2019-03-27 20:37:07,339 [salt.state       :1951][INFO    ][3320] Completed state [br-floating] at time 20:37:07.339430 duration_in_ms=353.642
2019-03-27 20:37:07,339 [salt.state       :1780][INFO    ][3320] Running state [linux_system_network] at time 20:37:07.339651
2019-03-27 20:37:07,339 [salt.state       :1813][INFO    ][3320] Executing state network.system for [linux_system_network]
2019-03-27 20:37:07,340 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2019-03-27 20:37:07,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2019-03-27 20:37:07,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2019-03-27 20:37:07,367 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2019-03-27 20:37:07,624 [salt.loaded.int.module.debian_ip:1964][WARNING ][3320] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-03-27 20:37:07,625 [salt.state       :300 ][INFO    ][3320] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,3 @@\n-NETWORKING=no\n\n+NETWORKING=yes\n\n HOSTNAME=gtw01\n\n+DOMAIN=mcp-fdio-noha.local\n'}
2019-03-27 20:37:07,625 [salt.state       :1951][INFO    ][3320] Completed state [linux_system_network] at time 20:37:07.625333 duration_in_ms=285.681
2019-03-27 20:37:07,625 [salt.state       :1780][INFO    ][3320] Running state [enp7s0] at time 20:37:07.625546
2019-03-27 20:37:07,625 [salt.state       :1813][INFO    ][3320] Executing state network.managed for [enp7s0]
2019-03-27 20:37:08,155 [salt.state       :300 ][INFO    ][3320] Interface enp7s0 is up to date.
2019-03-27 20:37:08,155 [salt.state       :1951][INFO    ][3320] Completed state [enp7s0] at time 20:37:08.155784 duration_in_ms=530.237
2019-03-27 20:37:08,155 [salt.state       :1780][INFO    ][3320] Running state [/etc/udev/rules.d/60-net-txqueue.rules] at time 20:37:08.155970
2019-03-27 20:37:08,156 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/udev/rules.d/60-net-txqueue.rules]
2019-03-27 20:37:08,169 [salt.state       :300 ][INFO    ][3320] File /etc/udev/rules.d/60-net-txqueue.rules is in the correct state
2019-03-27 20:37:08,169 [salt.state       :1951][INFO    ][3320] Completed state [/etc/udev/rules.d/60-net-txqueue.rules] at time 20:37:08.169436 duration_in_ms=13.466
2019-03-27 20:37:08,171 [salt.state       :1780][INFO    ][3320] Running state [/etc/profile.d/proxy.sh] at time 20:37:08.171574
2019-03-27 20:37:08,171 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/profile.d/proxy.sh]
2019-03-27 20:37:08,171 [salt.state       :300 ][INFO    ][3320] File /etc/profile.d/proxy.sh is not present
2019-03-27 20:37:08,172 [salt.state       :1951][INFO    ][3320] Completed state [/etc/profile.d/proxy.sh] at time 20:37:08.172070 duration_in_ms=0.496
2019-03-27 20:37:08,172 [salt.state       :1780][INFO    ][3320] Running state [/etc/apt/apt.conf.d/95proxies] at time 20:37:08.172207
2019-03-27 20:37:08,172 [salt.state       :1813][INFO    ][3320] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2019-03-27 20:37:08,172 [salt.state       :300 ][INFO    ][3320] File /etc/apt/apt.conf.d/95proxies is not present
2019-03-27 20:37:08,172 [salt.state       :1951][INFO    ][3320] Completed state [/etc/apt/apt.conf.d/95proxies] at time 20:37:08.172634 duration_in_ms=0.426
2019-03-27 20:37:08,172 [salt.state       :1780][INFO    ][3320] Running state [/dev/shm] at time 20:37:08.172767
2019-03-27 20:37:08,172 [salt.state       :1813][INFO    ][3320] Executing state mount.mounted for [/dev/shm]
2019-03-27 20:37:08,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -l' in directory '/root'
2019-03-27 20:37:08,181 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'blkid' in directory '/root'
2019-03-27 20:37:08,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -l' in directory '/root'
2019-03-27 20:37:08,197 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-03-27 20:37:08,203 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -l' in directory '/root'
2019-03-27 20:37:08,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-03-27 20:37:08,217 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -l' in directory '/root'
2019-03-27 20:37:08,224 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'umount /dev/shm' in directory '/root'
2019-03-27 20:37:08,229 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3320] Command '['umount', '/dev/shm']' failed with return code: 32
2019-03-27 20:37:08,229 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3320] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-03-27 20:37:08,229 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3320] retcode: 32
2019-03-27 20:37:08,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'mount -l' in directory '/root'
2019-03-27 20:37:08,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command 'blkid' in directory '/root'
2019-03-27 20:37:08,243 [salt.state       :300 ][INFO    ][3320] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2019-03-27 20:37:08,244 [salt.state       :1951][INFO    ][3320] Completed state [/dev/shm] at time 20:37:08.244116 duration_in_ms=71.348
2019-03-27 20:37:08,244 [salt.state       :1780][INFO    ][3320] Running state [ntp] at time 20:37:08.244328
2019-03-27 20:37:08,244 [salt.state       :1813][INFO    ][3320] Executing state pkg.installed for [ntp]
2019-03-27 20:37:08,250 [salt.state       :300 ][INFO    ][3320] All specified packages are already installed
2019-03-27 20:37:08,250 [salt.state       :1951][INFO    ][3320] Completed state [ntp] at time 20:37:08.250618 duration_in_ms=6.29
2019-03-27 20:37:08,251 [salt.state       :1780][INFO    ][3320] Running state [/etc/ntp.conf] at time 20:37:08.251899
2019-03-27 20:37:08,252 [salt.state       :1813][INFO    ][3320] Executing state file.managed for [/etc/ntp.conf]
2019-03-27 20:37:08,266 [salt.fileclient  :1219][INFO    ][3320] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2019-03-27 20:37:08,314 [salt.state       :300 ][INFO    ][3320] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
 
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
+# ntpd will only synchronize your clock.
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# Associate to cloud NTP pool servers
+logfile /var/log/ntp.log
+server 1.pool.ntp.org iburst
 
-# Specify one or more NTP servers.
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-# pools
-pool ntp.ubuntu.com iburst
-
-# Use Ubuntu's ntp server as a fallback.
-# pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
-
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2019-03-27 20:37:08,314 [salt.state       :1951][INFO    ][3320] Completed state [/etc/ntp.conf] at time 20:37:08.314801 duration_in_ms=62.902
2019-03-27 20:37:08,315 [salt.state       :1780][INFO    ][3320] Running state [ntp] at time 20:37:08.315948
2019-03-27 20:37:08,316 [salt.state       :1813][INFO    ][3320] Executing state service.running for [ntp]
2019-03-27 20:37:08,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2019-03-27 20:37:08,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-03-27 20:37:08,333 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2019-03-27 20:37:08,342 [salt.state       :300 ][INFO    ][3320] The service ntp is already running
2019-03-27 20:37:08,342 [salt.state       :1951][INFO    ][3320] Completed state [ntp] at time 20:37:08.342269 duration_in_ms=26.321
2019-03-27 20:37:08,342 [salt.state       :1780][INFO    ][3320] Running state [ntp] at time 20:37:08.342460
2019-03-27 20:37:08,342 [salt.state       :1813][INFO    ][3320] Executing state service.mod_watch for [ntp]
2019-03-27 20:37:08,343 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-03-27 20:37:08,351 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3320] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2019-03-27 20:37:08,381 [salt.state       :300 ][INFO    ][3320] {'ntp': True}
2019-03-27 20:37:08,381 [salt.state       :1951][INFO    ][3320] Completed state [ntp] at time 20:37:08.381557 duration_in_ms=39.097
2019-03-27 20:37:08,385 [salt.minion      :1711][INFO    ][3320] Returning information for job: 20190327203629260180
2019-03-27 20:37:16,093 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command pkg.upgrade with jid 20190327203716081692
2019-03-27 20:37:16,104 [salt.minion      :1432][INFO    ][7308] Starting a new job with PID 7308
2019-03-27 20:37:16,119 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7308] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:37:16,383 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7308] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2019-03-27 20:37:31,153 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command saltutil.find_job with jid 20190327203731142313
2019-03-27 20:37:31,162 [salt.minion      :1432][INFO    ][7588] Starting a new job with PID 7588
2019-03-27 20:37:31,194 [salt.minion      :1711][INFO    ][7588] Returning information for job: 20190327203731142313
2019-03-27 20:37:55,401 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7308] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 20:37:55,423 [salt.minion      :1711][INFO    ][7308] Returning information for job: 20190327203716081692
2019-03-27 21:12:35,852 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command state.sls with jid 20190327211235843949
2019-03-27 21:12:35,864 [salt.minion      :1432][INFO    ][8789] Starting a new job with PID 8789
2019-03-27 21:12:39,469 [salt.state       :915 ][INFO    ][8789] Loading fresh modules for state activity
2019-03-27 21:12:39,505 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/init.sls'
2019-03-27 21:12:39,531 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/gateway.sls'
2019-03-27 21:12:39,564 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/map.jinja'
2019-03-27 21:12:39,618 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/agents/_vpp.sls'
2019-03-27 21:12:39,673 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/_ssl/rabbitmq.sls'
2019-03-27 21:12:40,117 [salt.state       :1780][INFO    ][8789] Running state [neutron-dhcp-agent] at time 21:12:40.117541
2019-03-27 21:12:40,117 [salt.state       :1813][INFO    ][8789] Executing state pkg.installed for [neutron-dhcp-agent]
2019-03-27 21:12:40,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 21:12:40,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['apt-cache', '-q', 'policy', 'neutron-dhcp-agent'] in directory '/root'
2019-03-27 21:12:40,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-03-27 21:12:43,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-03-27 21:12:43,808 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'neutron-dhcp-agent'] in directory '/root'
2019-03-27 21:12:50,869 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command saltutil.find_job with jid 20190327211250859058
2019-03-27 21:12:50,881 [salt.minion      :1432][INFO    ][9353] Starting a new job with PID 9353
2019-03-27 21:12:50,901 [salt.minion      :1711][INFO    ][9353] Returning information for job: 20190327211250859058
2019-03-27 21:13:20,895 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command saltutil.find_job with jid 20190327211320884448
2019-03-27 21:13:20,905 [salt.minion      :1432][INFO    ][10141] Starting a new job with PID 10141
2019-03-27 21:13:20,929 [salt.minion      :1711][INFO    ][10141] Returning information for job: 20190327211320884448
2019-03-27 21:13:51,008 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command saltutil.find_job with jid 20190327211350998063
2019-03-27 21:13:51,020 [salt.minion      :1432][INFO    ][11302] Starting a new job with PID 11302
2019-03-27 21:13:51,032 [salt.minion      :1711][INFO    ][11302] Returning information for job: 20190327211350998063
2019-03-27 21:14:21,029 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command saltutil.find_job with jid 20190327211421018985
2019-03-27 21:14:21,038 [salt.minion      :1432][INFO    ][12042] Starting a new job with PID 12042
2019-03-27 21:14:21,049 [salt.minion      :1711][INFO    ][12042] Returning information for job: 20190327211421018985
2019-03-27 21:14:40,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 21:14:40,609 [salt.state       :300 ][INFO    ][8789] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.3.0-1~u16.04+mcp'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-openstacksdk' changed from 'absent' to '0.17.2-2~u16.04+mcp11'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.6'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-ryu' changed from 'absent' to '4.26+dfsg1-1~u16.04+mcp'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'neutron-dhcp-agent' changed from 'absent' to '2:13.0.2-2~u16.04+mcp119'
'python-editor' changed from 'absent' to '0.4-2'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'ieee-data' changed from 'absent' to '20150531.1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'python-oslo.versionedobjects' changed from 'absent' to '1.33.3-1~u16.04+mcp'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'ipset' changed from 'absent' to '6.29-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-httplib2' changed from 'absent' to '0.9.1+dfsg-1'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-weakrefmethod' changed from 'absent' to '1.0.3-2~u16.04+mcp1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'dnsmasq-utils' changed from 'absent' to '2.78-1~u16.04+mcp2'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-netaddr' changed from 'absent' to '0.7.18-1'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.6.0+dfsg.1-1~u16.04+mcp'
'python2.7-paramiko' changed from 'absent' to '1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'python-oslo.privsep' changed from 'absent' to '1.29.0-1~u16.04+mcp'
'python2.7-ryu' changed from 'absent' to '1'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oslo.db' changed from 'absent' to '4.40.1-1~u16.04+mcp3'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-simplejson' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python-designateclient' changed from 'absent' to '2.10.0-2~u16.04+mcp'
'python2.7-dbus' changed from 'absent' to '1'
'python-neutronclient' changed from 'absent' to '1:6.9.1-1~u16.04+mcp4'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python-oslo.context' changed from 'absent' to '1:2.21.0-1~u16.04+mcp'
'python-ovsdbapp' changed from 'absent' to '0.12.3-2~u16.04+mcp0'
'python-neutron-lib' changed from 'absent' to '1.18.0-1~u16.04+mcp5'
'python-oslo.cache' changed from 'absent' to '1.30.2-1~u16.04+mcp3'
'python-neutron' changed from 'absent' to '2:13.0.2-2~u16.04+mcp119'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-pyparsing' changed from 'absent' to '2.2.0+dfsg1-2~u16.04+mcp1'
'python-babel-localedata' changed from 'absent' to '2.6.0+dfsg.1-1~u16.04+mcp'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-oslo-utils' changed from 'absent' to '1'
'python-tinyrpc' changed from 'absent' to '0.6-1~u16.04+mcp'
'python-oslo-log' changed from 'absent' to '1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-stevedore' changed from 'absent' to '1:1.29.0-1~u16.04+mcp4'
'libipset3' changed from 'absent' to '6.29-1'
'python-lxml' changed from 'absent' to '3.5.0-1ubuntu0.1'
'python-oslo.config' changed from 'absent' to '1:6.4.0-1~u16.04+mcp'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-sortedcontainers' changed from 'absent' to '1.4.4-1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python-oslo.reports' changed from 'absent' to '1.28.0-2~u16.04+mcp4'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-oslo-db' changed from 'absent' to '1'
'python2.7-testscenarios' changed from 'absent' to '1'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'python2.7-waitress' changed from 'absent' to '1'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.27.0-1~u16.04+mcp'
'python-oslo.utils' changed from 'absent' to '3.36.4-1~u16.04+mcp'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'python-osc-lib' changed from 'absent' to '1.11.1-2~u16.04+mcp3'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-oslo.i18n' changed from 'absent' to '3.21.0-1~u16.04+mcp'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python2.7-greenlet' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python2.7-neutron' changed from 'absent' to '1'
'neutron-common' changed from 'absent' to '2:13.0.2-2~u16.04+mcp119'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-distribute' changed from 'absent' to '1'
'python-novaclient' changed from 'absent' to '2:11.0.0-2~u16.04+mcp13'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-5~u16.04+mcp0'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.39.0-1~u16.04+mcp'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '4.2.0-4~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'ipset-6.29' changed from 'absent' to '1'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.3.0-1~u16.04+mcp'
'python-osprofiler' changed from 'absent' to '2.3.0-1~u16.04+mcp'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-oslo.messaging' changed from 'absent' to '8.1.2-1~u16.04+mcp6'
'python2.7-cmd2' changed from 'absent' to '1'
'python-debtcollector' changed from 'absent' to '1.20.0-2~u16.04+mcp'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python2.7-lxml' changed from 'absent' to '1'
'python2.7-pil' changed from 'absent' to '1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-keystoneclient' changed from 'absent' to '1:3.17.0-1~u16.04+mcp4'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-oslo.service' changed from 'absent' to '1.31.7-1~u16.04+mcp4'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-keystoneauth1' changed from 'absent' to '3.10.0-1~u16.04+mcp10'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-sqlalchemy' changed from 'absent' to '1.2.10+ds1-1~u16.04+mcp'
'python-pyroute2' changed from 'absent' to '0.4.21-0.1~u16.04+mcp1'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp8'
'neutron-metadata-agent' changed from 'absent' to '2:13.0.2-2~u16.04+mcp119'
'python-openvswitch' changed from 'absent' to '2.10.1-1~u16.04+mcp'
'python2.7-pyroute2' changed from 'absent' to '1'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2019-03-27 21:14:40,622 [salt.state       :915 ][INFO    ][8789] Loading fresh modules for state activity
2019-03-27 21:14:40,643 [salt.state       :1951][INFO    ][8789] Completed state [neutron-dhcp-agent] at time 21:14:40.643352 duration_in_ms=120525.811
2019-03-27 21:14:40,646 [salt.state       :1780][INFO    ][8789] Running state [neutron-metadata-agent] at time 21:14:40.646943
2019-03-27 21:14:40,647 [salt.state       :1813][INFO    ][8789] Executing state pkg.installed for [neutron-metadata-agent]
2019-03-27 21:14:41,550 [salt.state       :300 ][INFO    ][8789] All specified packages are already installed
2019-03-27 21:14:41,550 [salt.state       :1951][INFO    ][8789] Completed state [neutron-metadata-agent] at time 21:14:41.550319 duration_in_ms=903.376
2019-03-27 21:14:41,550 [salt.state       :1780][INFO    ][8789] Running state [vpp-agent] at time 21:14:41.550491
2019-03-27 21:14:41,550 [salt.state       :1813][INFO    ][8789] Executing state pkg.installed for [vpp-agent]
2019-03-27 21:14:41,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-03-27 21:14:41,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'vpp-agent'] in directory '/root'
2019-03-27 21:14:47,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-03-27 21:14:47,488 [salt.state       :300 ][INFO    ][8789] Made the following changes:
'python-networking-vpp' changed from 'absent' to '18.10-0ppa15'
'python-etcd' changed from 'absent' to '0.4.5-1ppa1'
'vpp-agent' changed from 'absent' to '18.10-0ppa15'
'python-click' changed from 'absent' to '6.2-2ubuntu1'
'python-colorama' changed from 'absent' to '0.3.7-1'
'vpp-api-python' changed from 'absent' to '18.07-release'

2019-03-27 21:14:47,499 [salt.state       :915 ][INFO    ][8789] Loading fresh modules for state activity
2019-03-27 21:14:47,618 [salt.state       :1951][INFO    ][8789] Completed state [vpp-agent] at time 21:14:47.618042 duration_in_ms=6067.55
2019-03-27 21:14:47,620 [salt.state       :1780][INFO    ][8789] Running state [neutron_gateway_ssl_rabbitmq] at time 21:14:47.620664
2019-03-27 21:14:47,620 [salt.state       :1813][INFO    ][8789] Executing state test.show_notification for [neutron_gateway_ssl_rabbitmq]
2019-03-27 21:14:47,621 [salt.state       :300 ][INFO    ][8789] Running neutron._ssl.rabbitmq
2019-03-27 21:14:47,621 [salt.state       :1951][INFO    ][8789] Completed state [neutron_gateway_ssl_rabbitmq] at time 21:14:47.621449 duration_in_ms=0.785
2019-03-27 21:14:48,031 [salt.state       :1780][INFO    ][8789] Running state [haproxy] at time 21:14:48.031206
2019-03-27 21:14:48,031 [salt.state       :1813][INFO    ][8789] Executing state service.dead for [haproxy]
2019-03-27 21:14:48,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-03-27 21:14:48,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,057 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,087 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,373 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-03-27 21:14:48,383 [salt.state       :300 ][INFO    ][8789] {'haproxy': True}
2019-03-27 21:14:48,384 [salt.state       :1951][INFO    ][8789] Completed state [haproxy] at time 21:14:48.384050 duration_in_ms=352.844
2019-03-27 21:14:48,386 [salt.state       :1780][INFO    ][8789] Running state [/etc/neutron/neutron.conf] at time 21:14:48.386010
2019-03-27 21:14:48,386 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/neutron/neutron.conf]
2019-03-27 21:14:48,406 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/neutron-generic.conf'
2019-03-27 21:14:48,495 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_log.conf'
2019-03-27 21:14:48,512 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_default.conf'
2019-03-27 21:14:48,537 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/service/_wsgi_default.conf'
2019-03-27 21:14:48,548 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_concurrency.conf'
2019-03-27 21:14:48,561 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_rabbit.conf'
2019-03-27 21:14:48,583 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/messaging/_notifications.conf'
2019-03-27 21:14:48,596 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/_middleware.conf'
2019-03-27 21:14:48,608 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/rocky/oslo/service/_ssl.conf'
2019-03-27 21:14:48,616 [salt.state       :300 ][INFO    ][8789] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-core_plugin = ml2
 
 #
 # From neutron
@@ -26,12 +26,11 @@
 
 # The type of authentication to use (string value)
 #auth_strategy = keystone
-
 # The core plugin Neutron will use (string value)
-#core_plugin = <None>
+core_plugin = neutron.plugins.ml2.plugin.Ml2Plugin
 
 # The service plugins Neutron will use (list value)
-#service_plugins =
+service_plugins = vpp-router,metering
 
 # The base MAC address Neutron will use for VIFs. The first 3 octets will
 # remain unchanged. If the 4th octet is not 00, it will also be used. The
@@ -43,7 +42,7 @@
 
 # The maximum number of items returned in a single response, value was
 # 'infinite' or negative integer means no limit (string value)
-#pagination_max_limit = -1
+pagination_max_limit = -1
 
 # Default value of availability zone hints. The availability zone aware
 # schedulers use this when the resources availability_zone_hints is empty.
@@ -69,7 +68,7 @@
 
 # DHCP lease duration (in seconds). Use -1 to tell dnsmasq to use infinite
 # lease times. (integer value)
-#dhcp_lease_duration = 86400
+dhcp_lease_duration = 3600
 
 # Domain to use for building the hostnames (string value)
 #dns_domain = openstacklocal
@@ -83,7 +82,7 @@
 # Allow overlapping IP support in Neutron. Attention: the following parameter
 # MUST be set to False if Neutron is being used in conjunction with Nova
 # security groups. (boolean value)
-#allow_overlapping_ips = false
+allow_overlapping_ips = true
 
 # Hostname to be used by the Neutron server, agents and services running on
 # this machine. All the agents and services running on this machine must use
@@ -96,11 +95,11 @@
 #network_link_prefix = <None>
 
 # Send notification to nova when port status changes (boolean value)
-#notify_nova_on_port_status_changes = true
+notify_nova_on_port_status_changes = true
 
 # Send notification to nova when port data (fixed_ips/floatingip) changes so
 # nova can update its cache. (boolean value)
-#notify_nova_on_port_data_changes = true
+notify_nova_on_port_data_changes = true
 
 # Number of seconds between sending events to nova if there are any events to
 # send. (integer value)
@@ -125,7 +124,7 @@
 # neutron automatically subtracts the overlay protocol overhead from this
 # value. Defaults to 1500, the standard value for Ethernet. (integer value)
 # Deprecated group/name - [ml2]/segment_mtu
-#global_physnet_mtu = 1500
+global_physnet_mtu = 1500
 
 # Number of backlog requests to configure the socket with (integer value)
 #backlog = 4096
@@ -145,11 +144,11 @@
 #api_workers = <None>
 
 # Number of RPC worker processes for service. (integer value)
-#rpc_workers = 1
+rpc_workers = 16
 
 # Number of RPC worker processes dedicated to state reports queue. (integer
 # value)
-#rpc_state_report_workers = 1
+rpc_state_report_workers = 4
 
 # Range of seconds to randomly delay when starting the periodic task scheduler
 # to reduce stampeding. (Disable by setting to 0) (integer value)
@@ -176,10 +175,6 @@
 #
 # From neutron.db
 #
-
-# Seconds to regard the agent is down; should be at least twice
-# report_interval, to be sure the agent is down for good. (integer value)
-#agent_down_time = 75
 
 # Representing the resource type whose load is being reported by the agent.
 # This can be "networks", "subnets" or "ports". When specified (Default is
@@ -222,7 +217,7 @@
 # greater than 1, the scheduler automatically assigns multiple DHCP agents for
 # a given tenant network, providing high availability for DHCP service.
 # (integer value)
-#dhcp_agents_per_network = 1
+dhcp_agents_per_network = 2
 
 # Enable services on an agent with admin_state_up False. If this option is
 # False, when admin_state_up of an agent is turned False, services on it will
@@ -241,28 +236,28 @@
 
 # System-wide flag to determine the type of router that tenants can create.
 # Only admin can override. (boolean value)
-#router_distributed = false
+router_distributed = False
 
 # Determine if setup is configured for DVR. If False, DVR API extension will be
 # disabled. (boolean value)
-#enable_dvr = true
+enable_dvr = False
 
 # Driver to use for scheduling router to a default L3 agent (string value)
-#router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.LeastRoutersScheduler
+router_scheduler_driver = neutron.scheduler.l3_agent_scheduler.ChanceScheduler
 
 # Allow auto scheduling of routers to L3 agent. (boolean value)
 #router_auto_schedule = true
 
 # Automatically reschedule routers from offline L3 agents to online L3 agents.
 # (boolean value)
-#allow_automatic_l3agent_failover = false
+allow_automatic_l3agent_failover = true
 
 # Enable HA mode for virtual routers. (boolean value)
-#l3_ha = false
+l3_ha = false
 
 # Maximum number of L3 agents which a HA router will be scheduled on. If it is
 # set to 0 then the router will be scheduled on every agent. (integer value)
-#max_l3_agents_per_router = 3
+max_l3_agents_per_router = 0
 
 # Subnet used for the l3 HA admin network. (string value)
 #l3_ha_net_cidr = 169.254.192.0/18
@@ -283,7 +278,6 @@
 
 # Maximum number of allowed address pairs (integer value)
 #max_allowed_address_pair = 10
-
 #
 # From oslo.log
 #
@@ -447,6 +441,7 @@
 # exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
+
 # Expiration timeout in seconds of a name service record about existing target
 # ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
@@ -574,6 +569,7 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@172.30.10.107:5672//openstack
 
 # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
 # include amqp and zmq. (string value)
@@ -584,8 +580,7 @@
 
 # The default exchange under which topics are scoped. May be overridden by an
 # exchange name specified in the transport_url option. (string value)
-#control_exchange = neutron
-
+#control_exchange = keystone
 #
 # From oslo.service.wsgi
 #
@@ -621,7 +616,6 @@
 
 
 [agent]
-root_helper = "sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf"
 
 #
 # From neutron.agent
@@ -631,7 +625,7 @@
 # /etc/neutron/rootwrap.conf' to use the real root filter facility. Change to
 # 'sudo' to skip the filtering and just run the command directly. (string
 # value)
-#root_helper = sudo
+root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
 
 # Use the root helper when listing the namespaces on a system. This may not be
 # required depending on the security configuration. If the root helper is not
@@ -656,7 +650,7 @@
 # Seconds between nodes reporting state to server; should be less than
 # agent_down_time, best if it is half or less than agent_down_time. (floating
 # point value)
-#report_interval = 30
+report_interval = 120
 
 # Log agent heartbeats (boolean value)
 #log_agent_heartbeats = false
@@ -689,509 +683,11 @@
 
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-Volume-microversion
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID
-
-
-[database]
-connection = sqlite:////var/lib/neutron/neutron.sqlite
-
-#
-# From neutron.db
-#
-
-# Database engine for which script will be generated when using offline
-# migration. (string value)
-#engine =
-
-#
-# From oslo.db
-#
-
-# If True, SQLite uses synchronous mode. (boolean value)
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
-#mysql_enable_ndb = false
-
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
-# Deprecated group/name - [DATABASE]/idle_timeout
-# Deprecated group/name - [database]/idle_timeout
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
 
 [keystone_authtoken]
 
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. (string
-# value)
-# Deprecated group/name - [keystone_authtoken]/auth_uri
-#www_authenticate_uri = <None>
-
-# DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
-# be an "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should ideally be unversioned, client support in the
-# wild varies. If you're using a versioned v2 endpoint here, then this should
-# *not* be the same endpoint the service user utilizes for validating tokens,
-# because normal end users may not be able to reach that endpoint. This option
-# is deprecated in favor of www_authenticate_uri and will be removed in the S
-# release. (string value)
-# This option is deprecated for removal since Queens.
-# Its value may be silently ignored in the future.
-# Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
-# and will be removed in the S  release.
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the
-# authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer
-# value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity
-# API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this option to have
-# the middleware share a caching backend with swift. Otherwise, use the
-# ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-#region_name = <None>
-
-# DEPRECATED: Directory used to cache files related to PKI tokens. This option
-# has been deprecated in the Ocata release and will be removed in the P
-# release. (string value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left
-# undefined, tokens will instead be cached in-process. (list value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is
-# tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached
-# server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached
-# server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the
-# pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached
-# client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The
-# advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
-# middleware will not ask for service catalog on token validation and will not
-# set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled"
-# to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it
-# if not. "strict" like "permissive" but if the bind type is unknown the token
-# will be rejected. "required" any form of token binding is needed to be
-# allowed. Finally the name of a binding method that must be present in tokens.
-# (string value)
-#enforce_token_bind = permissive
-
-# DEPRECATED: If true, the revocation list will be checked for cached tokens.
-# This requires that PKI tokens are configured on the identity server. (boolean
-# value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#check_revocations_for_cached = false
-
-# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
-# single algorithm or multiple. The algorithms are those supported by Python
-# standard hashlib.new(). The hashes will be tried in the order given, so put
-# the preferred one first for performance. The result of the first hash will be
-# stored in the cache. This will typically be set to multiple values only while
-# migrating from a less secure algorithm to a more secure one. Once all the old
-# tokens are expired this option should be set to a single value for better
-# performance. (list value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#hash_algorithms = md5
-
-# A choice of roles that must be present in a service token. Service tokens are
-# allowed to request that an expired token can be used and so this check should
-# tightly control that only actual services should be sending this token. Roles
-# here are applied as an ANY check so any role in this list must be present.
-# For backwards compatibility reasons this currently only affects the
-# allow_expired check. (list value)
-#service_token_roles = service
-
-# For backwards compatibility reasons we must let valid service tokens pass
-# that don't pass the service_token_roles check as valid. Setting this true
-# will become the default in a future release and should be enabled if
-# possible. (boolean value)
-#service_token_roles_required = false
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[nova]
-
-#
-# From neutron
-#
-
-# Name of nova region to use. Useful if keystone manages more than one region.
-# (string value)
-#region_name = <None>
-
-# Type of the nova endpoint to use.  This endpoint will be looked up in the
-# keystone catalog and should be one of public, internal or admin. (string
-# value)
-# Possible values:
-# public - <No description provided>
-# admin - <No description provided>
-# internal - <No description provided>
-#endpoint_type = public
-
-#
-# From nova.auth
-#
-
-# Authentication URL (string value)
-#auth_url = <None>
-
-# Authentication type to load (string value)
-# Deprecated group/name - [nova]/auth_plugin
-#auth_type = <None>
-
-# PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# (string value)
-#cafile = <None>
-
-# PEM encoded client certificate cert file (string value)
-#certfile = <None>
-
-# Collect per-API call timing information. (boolean value)
-#collect_timing = false
-
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# PEM encoded client certificate key file (string value)
-#keyfile = <None>
-
-# User's password (string value)
-#password = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [nova]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [nova]/tenant_name
-#project_name = <None>
-
-# Log requests to multiple loggers. (boolean value)
-#split_loggers = false
-
-# Scope for system operations (string value)
-#system_scope = <None>
-
-# Tenant ID (string value)
-#tenant_id = <None>
-
-# Tenant Name (string value)
-#tenant_name = <None>
-
-# Timeout value for http requests (integer value)
-#timeout = <None>
-
-# Trust ID (string value)
-#trust_id = <None>
-
-# User's domain id (string value)
-#user_domain_id = <None>
-
-# User's domain name (string value)
-#user_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [nova]/user_name
-#username = <None>
-
 
 [oslo_concurrency]
-
 #
 # From oslo.concurrency
 #
@@ -1199,326 +695,15 @@
 # Enables or disables inter-process locks. (boolean value)
 #disable_process_locking = false
 
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
+# Directory to use for lock files.  For security, the specified
+# directory should only be writable by the user running the processes
+# that need locking. Defaults to environment variable OSLO_LOCK_PATH.
+# If OSLO_LOCK_PATH is not set in the environment, use the Python
+# tempfile.gettempdir function to find a suitable location. If
+# external locks are used, a lock path must be set. (string value)
+#lock_path = /tmp
+lock_path = /var/lock/neutron
 [oslo_messaging_rabbit]
-
 #
 # From oslo.messaging
 #
@@ -1534,24 +719,6 @@
 # Connect over SSL. (boolean value)
 # Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
 #ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
 
 # How long to wait before reconnecting in response to an AMQP consumer cancel
 # notification. (floating point value)
@@ -1666,213 +833,59 @@
 #heartbeat_rate = 2
 
 
-[oslo_messaging_zmq]
-
+
+[oslo_messaging_notifications]
 #
 # From oslo.messaging
 #
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver=messagingv2
+
+# A URL representing the messaging driver to use for notifications. If not set,
+# we fall back to the same configuration used for RPC. (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+
+# The maximum number of attempts to re-send a notification message which failed
+# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
+# (integer value)
+#retry = -1
 
 
 [oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the original
+# request protocol scheme was, even if it was hidden by a SSL termination
+# proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
 
 # Whether the application is behind a proxy or not. This determines if the
 # middleware should parse the headers or not. (boolean value)
 #enable_proxy_headers_parsing = false
+enable_proxy_headers_parsing = True
+
 
 
 [oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
 
 
 [quotas]
@@ -1927,7 +940,6 @@
 
 
 [ssl]
-
 #
 # From oslo.service.sslutils
 #
@@ -1952,3 +964,6 @@
 # Sets the list of available ciphers. value should be a string in the OpenSSL
 # cipher list format. (string value)
 #ciphers = <None>
+
+
+[ovs]

2019-03-27 21:14:48,617 [salt.state       :1951][INFO    ][8789] Completed state [/etc/neutron/neutron.conf] at time 21:14:48.617207 duration_in_ms=231.197
2019-03-27 21:14:48,617 [salt.state       :1780][INFO    ][8789] Running state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 21:14:48.617397
2019-03-27 21:14:48,617 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/neutron/plugins/ml2/ml2_conf.ini]
2019-03-27 21:14:48,630 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/_ml2_conf.vpp.ini'
2019-03-27 21:14:48,696 [salt.state       :300 ][INFO    ][8789] File changed:
--- 
+++ 
@@ -1,263 +1,17 @@
-[DEFAULT]
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-
-[l2pop]
-
-#
-# From neutron.ml2
-#
-
-# Delay within which agent is expected to update existing ports when it
-# restarts (integer value)
-#agent_boot_time = 180
-
 
 [ml2]
+type_drivers = flat,vlan
 
-#
-# From neutron.ml2
-#
-
-# List of network type driver entrypoints to be loaded from the
-# neutron.ml2.type_drivers namespace. (list value)
-#type_drivers = local,flat,vlan,gre,vxlan,geneve
-
-# Ordered list of network_types to allocate as tenant networks. The default
-# value 'local' is useful for single-box testing but provides no connectivity
-# between hosts. (list value)
-#tenant_network_types = local
-
-# An ordered list of networking mechanism driver entrypoints to be loaded from
-# the neutron.ml2.mechanism_drivers namespace. (list value)
-#mechanism_drivers =
-
-# An ordered list of extension driver entrypoints to be loaded from the
-# neutron.ml2.extension_drivers namespace. For example: extension_drivers =
-# port_security,qos (list value)
-#extension_drivers =
-
-# Maximum size of an IP packet (MTU) that can traverse the underlying physical
-# network infrastructure without fragmentation when using an overlay/tunnel
-# protocol. This option allows specifying a physical network MTU value that
-# differs from the default global_physnet_mtu value. (integer value)
-#path_mtu = 0
-
-# A list of mappings of physical networks to MTU values. The format of the
-# mapping is <physnet>:<mtu val>. This mapping allows specifying a physical
-# network MTU value that differs from the default global_physnet_mtu value.
-# (list value)
-#physical_network_mtus =
-
-# Default network type for external networks when no provider attributes are
-# specified. By default it is None, which means that if provider attributes are
-# not specified while creating external networks then they will have the same
-# type as tenant networks. Allowed values for external_network_type config
-# option depend on the network type values configured in type_drivers config
-# option. (string value)
-#external_network_type = <None>
-
-# IP version of all overlay (tunnel) network endpoints. Use a value of 4 for
-# IPv4 or 6 for IPv6. (integer value)
-#overlay_ip_version = 4
-
-
-[ml2_type_flat]
-
-#
-# From neutron.ml2
-#
-
-# List of physical_network names with which flat networks can be created. Use
-# default '*' to allow flat networks with arbitrary physical_network names. Use
-# an empty list to disable flat networks. (list value)
-#flat_networks = *
-
-
-[ml2_type_geneve]
-
-#
-# From neutron.ml2
-#
-
-# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
-# Geneve VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
-
-# Geneve encapsulation header size is dynamic, this value is used to calculate
-# the maximum MTU for the driver. This is the sum of the sizes of the outer ETH
-# + IP + UDP + GENEVE header sizes. The default size for this field is 50,
-# which is the size of the Geneve header without any additional option headers.
-# (integer value)
-#max_header_size = 30
-
-
-[ml2_type_gre]
-
-#
-# From neutron.ml2
-#
-
-# Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE
-# tunnel IDs that are available for tenant network allocation (list value)
-#tunnel_id_ranges =
-
-
-[ml2_type_vlan]
-
-#
-# From neutron.ml2
-#
-
-# List of <physical_network>:<vlan_min>:<vlan_max> or <physical_network>
-# specifying physical_network names usable for VLAN provider and tenant
-# networks, as well as ranges of VLAN tags on each available for allocation to
-# tenant networks. (list value)
-#network_vlan_ranges =
-
-
-[ml2_type_vxlan]
-
-#
-# From neutron.ml2
-#
-
-# Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of
-# VXLAN VNI IDs that are available for tenant network allocation (list value)
-#vni_ranges =
-
-# Multicast group for VXLAN. When configured, will enable sending all broadcast
-# traffic to this multicast group. When left unconfigured, will disable
-# multicast VXLAN mode. (string value)
-#vxlan_group = <None>
-
-
-[securitygroup]
-
-#
-# From neutron.ml2
-#
-
-# Driver for security groups firewall in the L2 agent (string value)
-#firewall_driver = <None>
-
-# Controls whether the neutron security group API is enabled in the server. It
-# should be false when using no security groups or using the nova security
-# group API. (boolean value)
-#enable_security_group = true
-
-# Use ipset to speed-up the iptables based security groups. Enabling ipset
-# support requires that ipset is installed on L2 agent node. (boolean value)
-#enable_ipset = true
+[ml2_vpp]
+jwt_signing = False
+etcd_insecure_explicit_disable_https = True
+l3_hosts = gtw01
+enable_l3_ha = False
+gpe_locators =
+gpe_src_cidr =
+enable_vpp_restart = False
+etcd_pass = 
+etcd_user = 
+etcd_port = 4001
+etcd_host = 10.167.4.36
+physnets = physnet2:FortyGigabitEthernet7/0/0,physnet1:tap0

2019-03-27 21:14:48,696 [salt.state       :1951][INFO    ][8789] Completed state [/etc/neutron/plugins/ml2/ml2_conf.ini] at time 21:14:48.696393 duration_in_ms=78.996
2019-03-27 21:14:48,696 [salt.state       :1780][INFO    ][8789] Running state [vpp] at time 21:14:48.696560
2019-03-27 21:14:48,696 [salt.state       :1813][INFO    ][8789] Executing state service.running for [vpp]
2019-03-27 21:14:48,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'status', 'vpp.service', '-n', '0'] in directory '/root'
2019-03-27 21:14:48,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'vpp.service'] in directory '/root'
2019-03-27 21:14:48,714 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp.service'] in directory '/root'
2019-03-27 21:14:48,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'vpp.service'] in directory '/root'
2019-03-27 21:14:48,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'vpp.service'] in directory '/root'
2019-03-27 21:14:48,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp.service'] in directory '/root'
2019-03-27 21:14:48,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp.service'] in directory '/root'
2019-03-27 21:14:48,771 [salt.state       :300 ][INFO    ][8789] {'vpp': True}
2019-03-27 21:14:48,771 [salt.state       :1951][INFO    ][8789] Completed state [vpp] at time 21:14:48.771636 duration_in_ms=75.076
2019-03-27 21:14:48,771 [salt.state       :1780][INFO    ][8789] Running state [vpp-agent] at time 21:14:48.771848
2019-03-27 21:14:48,772 [salt.state       :1813][INFO    ][8789] Executing state service.running for [vpp-agent]
2019-03-27 21:14:48,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'status', 'vpp-agent.service', '-n', '0'] in directory '/root'
2019-03-27 21:14:48,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:48,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:48,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:48,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:48,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:48,832 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:48,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:49,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:49,121 [salt.state       :300 ][INFO    ][8789] {'vpp-agent': True}
2019-03-27 21:14:49,121 [salt.state       :1951][INFO    ][8789] Completed state [vpp-agent] at time 21:14:49.121432 duration_in_ms=349.584
2019-03-27 21:14:49,121 [salt.state       :1780][INFO    ][8789] Running state [/etc/neutron/l3_agent.ini] at time 21:14:49.121787
2019-03-27 21:14:49,122 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/neutron/l3_agent.ini]
2019-03-27 21:14:49,136 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/l3_agent.ini'
2019-03-27 21:14:49,208 [salt.state       :300 ][INFO    ][8789] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -13,7 +14,7 @@
 #ovs_use_veth = false
 
 # The driver used to manage the virtual interface. (string value)
-#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver
 
 #
 # From neutron.l3.agent
@@ -37,12 +38,12 @@
 # dvr_snat - <No description provided>
 # legacy - <No description provided>
 # dvr_no_external - <No description provided>
-#agent_mode = legacy
+agent_mode = legacy
 
 # TCP Port used by Neutron metadata namespace proxy. (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#metadata_port = 9697
+metadata_port = 8775
 
 # Indicates that this L3 agent should also handle routers that do not have an
 # external network gateway configured. This option should be True only for a
@@ -162,7 +163,6 @@
 
 # MaxRtrAdvInterval setting for radvd.conf (integer value)
 #max_rtr_adv_interval = 100
-
 #
 # From oslo.log
 #
@@ -277,6 +277,7 @@
 #fatal_deprecations = false
 
 
+
 [agent]
 
 #
@@ -314,8 +315,8 @@
 
 # DEPRECATED: The interface for interacting with the OVSDB (string value)
 # Possible values:
+# native - <No description provided>
 # vsctl - <No description provided>
-# native - <No description provided>
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #ovsdb_interface = native

2019-03-27 21:14:49,208 [salt.state       :1951][INFO    ][8789] Completed state [/etc/neutron/l3_agent.ini] at time 21:14:49.208807 duration_in_ms=87.019
2019-03-27 21:14:49,209 [salt.state       :1780][INFO    ][8789] Running state [/etc/neutron/plugins/ml2/openvswitch_agent.ini] at time 21:14:49.209096
2019-03-27 21:14:49,209 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/neutron/plugins/ml2/openvswitch_agent.ini]
2019-03-27 21:14:49,223 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/openvswitch_agent.ini'
2019-03-27 21:14:49,307 [salt.state       :300 ][INFO    ][8789] File changed:
--- 
+++ 
@@ -1,5 +1,5 @@
+
 [DEFAULT]
-
 #
 # From oslo.log
 #
@@ -114,6 +114,7 @@
 #fatal_deprecations = false
 
 
+
 [agent]
 
 #
@@ -127,37 +128,12 @@
 # losing communication with it. (integer value)
 #ovsdb_monitor_respawn_interval = 30
 
-# Network types supported by the agent (gre, vxlan and/or geneve). (list value)
-#tunnel_types =
-
-# The UDP port to use for VXLAN tunnels. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#vxlan_udp_port = 4789
-
-# MTU size of veth interfaces (integer value)
-#veth_mtu = 9000
-
-# Use ML2 l2population mechanism driver to learn remote MAC and IPs and improve
-# tunnel scalability. (boolean value)
-#l2_population = false
-
-# Enable local ARP responder if it is supported. Requires OVS 2.1 and ML2
-# l2population driver. Allows the switch (when supporting an overlay) to
-# respond to an ARP request locally without performing a costly ARP broadcast
-# into the overlay. (boolean value)
-#arp_responder = false
-
-# Set or un-set the don't fragment (DF) bit on outgoing IP packet carrying
-# GRE/VXLAN tunnel. (boolean value)
-#dont_fragment = true
-
 # Make the l2 agent run in DVR mode. (boolean value)
-#enable_distributed_routing = false
+enable_distributed_routing = False
 
 # Reset flow table on start. Setting this to True will cause brief traffic
 # interruption. (boolean value)
-#drop_flows_on_start = false
+drop_flows_on_start = false
 
 # Set or un-set the tunnel header checksum  on outgoing IP packet carrying
 # GRE/VXLAN tunnel. (boolean value)
@@ -169,7 +145,7 @@
 #agent_type = Open vSwitch agent
 
 # Extensions list to use (list value)
-#extensions =
+extensions = 
 
 
 [network_log]
@@ -227,7 +203,8 @@
 # have mappings to appropriate bridges on each agent. Note: If you remove a
 # bridge from this mapping, make sure to disconnect it from the integration
 # bridge as it won't be managed by the agent anymore. (list value)
-#bridge_mappings =
+
+bridge_mappings = physnet1:br-floating,physnet2:br-prv
 
 # Use veths instead of patch ports to interconnect the integration bridge to
 # physical networks. Support kernel without Open vSwitch patch port support so
@@ -308,12 +285,12 @@
 #
 
 # Driver for security groups firewall in the L2 agent (string value)
-#firewall_driver = <None>
+firewall_driver = iptables_hybrid
 
 # Controls whether the neutron security group API is enabled in the server. It
 # should be false when using no security groups or using the nova security
 # group API. (boolean value)
-#enable_security_group = true
+enable_security_group = True
 
 # Use ipset to speed-up the iptables based security groups. Enabling ipset
 # support requires that ipset is installed on L2 agent node. (boolean value)

2019-03-27 21:14:49,307 [salt.state       :1951][INFO    ][8789] Completed state [/etc/neutron/plugins/ml2/openvswitch_agent.ini] at time 21:14:49.307342 duration_in_ms=98.244
2019-03-27 21:14:49,307 [salt.state       :1780][INFO    ][8789] Running state [/etc/neutron/dhcp_agent.ini] at time 21:14:49.307668
2019-03-27 21:14:49,307 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/neutron/dhcp_agent.ini]
2019-03-27 21:14:49,322 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/dhcp_agent.ini'
2019-03-27 21:14:49,400 [salt.state       :300 ][INFO    ][8789] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -13,7 +14,7 @@
 #ovs_use_veth = false
 
 # The driver used to manage the virtual interface. (string value)
-#interface_driver = <None>
+interface_driver = neutron.agent.linux.interface.BridgeInterfaceDriver
 
 #
 # From neutron.dhcp.agent
@@ -22,7 +23,7 @@
 # The DHCP agent will resync its state with Neutron to recover from any
 # transient notification or RPC errors. The interval is number of seconds
 # between attempts. (integer value)
-#resync_interval = 5
+resync_interval = 30
 
 # The driver used to manage the DHCP server. (string value)
 #dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
@@ -34,7 +35,7 @@
 # instance must be configured to request host routes via DHCP (Option 121).
 # This option doesn't have any effect when force_metadata is set to True.
 # (boolean value)
-#enable_isolated_metadata = false
+enable_isolated_metadata = true
 
 # In some cases the Neutron router is not present to provide the metadata IP
 # but the DHCP server can be used to provide this info. Setting this value will
@@ -42,6 +43,7 @@
 # this option is set, then the metadata service will be activated for all the
 # networks. (boolean value)
 #force_metadata = false
+force_metadata = true
 
 # Allows for serving metadata requests coming from a dedicated metadata access
 # network whose CIDR is 169.254.169.254/16 (or larger prefix), and is connected
@@ -49,7 +51,7 @@
 # DHCP Option 121 will not be injected in VMs, as they will be able to reach
 # 169.254.169.254 through a router. This option requires
 # enable_isolated_metadata = True. (boolean value)
-#enable_metadata_network = false
+enable_metadata_network = false
 
 # Number of threads to use during sync process. Should not exceed connection
 # pool size configured on server. (integer value)
@@ -90,7 +92,6 @@
 # DHCP rebinding time T2 (in seconds). If set to 0, it will default to 7/8 of
 # the lease time. (integer value)
 #dhcp_rebinding_time = 0
-
 #
 # From oslo.log
 #
@@ -205,6 +206,7 @@
 #fatal_deprecations = false
 
 
+
 [agent]
 
 #

2019-03-27 21:14:49,400 [salt.state       :1951][INFO    ][8789] Completed state [/etc/neutron/dhcp_agent.ini] at time 21:14:49.400830 duration_in_ms=93.161
2019-03-27 21:14:49,401 [salt.state       :1780][INFO    ][8789] Running state [/etc/neutron/metadata_agent.ini] at time 21:14:49.401152
2019-03-27 21:14:49,401 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/neutron/metadata_agent.ini]
2019-03-27 21:14:49,416 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/files/rocky/metadata_agent.ini'
2019-03-27 21:14:49,487 [salt.state       :300 ][INFO    ][8789] File changed:
--- 
+++ 
@@ -1,3 +1,4 @@
+
 [DEFAULT]
 
 #
@@ -19,7 +20,7 @@
 #auth_ca_cert = <None>
 
 # IP address or DNS name of Nova metadata server. (host address value)
-#nova_metadata_host = 127.0.0.1
+nova_metadata_host = 172.30.10.107
 
 # TCP Port used by Nova metadata server. (port value)
 # Minimum value: 0
@@ -31,13 +32,13 @@
 # but it must match here and in the configuration used by the Nova Metadata
 # Server. NOTE: Nova uses the same config key, but in [neutron] section.
 # (string value)
-#metadata_proxy_shared_secret =
+metadata_proxy_shared_secret = opnfv_secret
 
 # Protocol to access nova metadata, http or https (string value)
 # Possible values:
 # http - <No description provided>
 # https - <No description provided>
-#nova_metadata_protocol = http
+nova_metadata_protocol = http
 
 # Allow to perform insecure SSL (https) requests to nova metadata (boolean
 # value)
@@ -69,7 +70,6 @@
 # Number of backlog requests to configure the metadata server socket with
 # (integer value)
 #metadata_backlog = 4096
-
 #
 # From oslo.log
 #
@@ -184,6 +184,7 @@
 #fatal_deprecations = false
 
 
+
 [agent]
 
 #
@@ -200,82 +201,3 @@
 
 
 [cache]
-
-#
-# From oslo.cache
-#
-
-# Prefix for building the configuration dictionary for the cache region. This
-# should not need to be changed unless there is another dogpile.cache region
-# with the same configuration name. (string value)
-#config_prefix = cache.oslo
-
-# Default TTL, in seconds, for any cached item in the dogpile.cache region.
-# This applies to any cached method that doesn't have an explicit cache
-# expiration time defined for it. (integer value)
-#expiration_time = 600
-
-# Cache backend module. For eventlet-based or environments with hundreds of
-# threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is
-# recommended. For environments with less than 100 threaded servers, Memcached
-# (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test
-# environments with a single instance of the server can use the
-# dogpile.cache.memory backend. (string value)
-# Possible values:
-# oslo_cache.memcache_pool - <No description provided>
-# oslo_cache.dict - <No description provided>
-# oslo_cache.mongo - <No description provided>
-# oslo_cache.etcd3gw - <No description provided>
-# dogpile.cache.memcached - <No description provided>
-# dogpile.cache.pylibmc - <No description provided>
-# dogpile.cache.bmemcached - <No description provided>
-# dogpile.cache.dbm - <No description provided>
-# dogpile.cache.redis - <No description provided>
-# dogpile.cache.memory - <No description provided>
-# dogpile.cache.memory_pickle - <No description provided>
-# dogpile.cache.null - <No description provided>
-#backend = dogpile.cache.null
-
-# Arguments supplied to the backend module. Specify this option once per
-# argument to be passed to the dogpile.cache backend. Example format:
-# "<argname>:<value>". (multi valued)
-#backend_argument =
-
-# Proxy classes to import that will affect the way the dogpile.cache backend
-# functions. See the dogpile.cache documentation on changing-backend-behavior.
-# (list value)
-#proxies =
-
-# Global toggle for caching. (boolean value)
-#enabled = false
-
-# Extra debugging from the cache backend (cache keys, get/set/delete/etc
-# calls). This is only really useful if you need to see the specific cache-
-# backend get/set/delete calls with the keys/values.  Typically this should be
-# left set to false. (boolean value)
-#debug_cache_backend = false
-
-# Memcache servers in the format of "host:port". (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (list value)
-#memcache_servers = localhost:11211
-
-# Number of seconds memcached server is considered dead before it is tried
-# again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).
-# (integer value)
-#memcache_dead_retry = 300
-
-# Timeout in seconds for every call to a server. (dogpile.cache.memcache and
-# oslo_cache.memcache_pool backends only). (floating point value)
-#memcache_socket_timeout = 3.0
-
-# Max total number of open connections to every memcached server.
-# (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_maxsize = 10
-
-# Number of seconds a connection to memcached is held unused in the pool before
-# it is closed. (oslo_cache.memcache_pool backend only). (integer value)
-#memcache_pool_unused_timeout = 60
-
-# Number of seconds that an operation will wait to get a memcache client
-# connection. (integer value)
-#memcache_pool_connection_get_timeout = 10

2019-03-27 21:14:49,487 [salt.state       :1951][INFO    ][8789] Completed state [/etc/neutron/metadata_agent.ini] at time 21:14:49.487722 duration_in_ms=86.569
2019-03-27 21:14:49,488 [salt.state       :1780][INFO    ][8789] Running state [/etc/default/neutron-metadata-agent] at time 21:14:49.488123
2019-03-27 21:14:49,488 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/default/neutron-metadata-agent]
2019-03-27 21:14:49,502 [salt.fileclient  :1219][INFO    ][8789] Fetching file from saltenv 'base', ** done ** 'neutron/files/default'
2019-03-27 21:14:49,508 [salt.state       :300 ][INFO    ][8789] File changed:
New file
2019-03-27 21:14:49,508 [salt.state       :1951][INFO    ][8789] Completed state [/etc/default/neutron-metadata-agent] at time 21:14:49.508186 duration_in_ms=20.063
2019-03-27 21:14:49,508 [salt.state       :1780][INFO    ][8789] Running state [/etc/default/neutron-dhcp-agent] at time 21:14:49.508557
2019-03-27 21:14:49,508 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/default/neutron-dhcp-agent]
2019-03-27 21:14:49,523 [salt.state       :300 ][INFO    ][8789] File changed:
New file
2019-03-27 21:14:49,523 [salt.state       :1951][INFO    ][8789] Completed state [/etc/default/neutron-dhcp-agent] at time 21:14:49.523391 duration_in_ms=14.834
2019-03-27 21:14:49,523 [salt.state       :1780][INFO    ][8789] Running state [/etc/default/vpp-agent] at time 21:14:49.523750
2019-03-27 21:14:49,523 [salt.state       :1813][INFO    ][8789] Executing state file.managed for [/etc/default/vpp-agent]
2019-03-27 21:14:49,538 [salt.state       :300 ][INFO    ][8789] File changed:
New file
2019-03-27 21:14:49,538 [salt.state       :1951][INFO    ][8789] Completed state [/etc/default/vpp-agent] at time 21:14:49.538542 duration_in_ms=14.791
2019-03-27 21:14:49,540 [salt.state       :1780][INFO    ][8789] Running state [neutron-metadata-agent] at time 21:14:49.540353
2019-03-27 21:14:49,540 [salt.state       :1813][INFO    ][8789] Executing state service.running for [neutron-metadata-agent]
2019-03-27 21:14:49,541 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'status', 'neutron-metadata-agent.service', '-n', '0'] in directory '/root'
2019-03-27 21:14:49,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'neutron-metadata-agent.service'] in directory '/root'
2019-03-27 21:14:49,570 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'neutron-metadata-agent.service'] in directory '/root'
2019-03-27 21:14:49,584 [salt.state       :300 ][INFO    ][8789] The service neutron-metadata-agent is already running
2019-03-27 21:14:49,584 [salt.state       :1951][INFO    ][8789] Completed state [neutron-metadata-agent] at time 21:14:49.584600 duration_in_ms=44.246
2019-03-27 21:14:49,584 [salt.state       :1780][INFO    ][8789] Running state [neutron-metadata-agent] at time 21:14:49.584775
2019-03-27 21:14:49,585 [salt.state       :1813][INFO    ][8789] Executing state service.mod_watch for [neutron-metadata-agent]
2019-03-27 21:14:49,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'neutron-metadata-agent.service'] in directory '/root'
2019-03-27 21:14:49,596 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'neutron-metadata-agent.service'] in directory '/root'
2019-03-27 21:14:50,401 [salt.state       :300 ][INFO    ][8789] {'neutron-metadata-agent': True}
2019-03-27 21:14:50,401 [salt.state       :1951][INFO    ][8789] Completed state [neutron-metadata-agent] at time 21:14:50.401511 duration_in_ms=816.736
2019-03-27 21:14:50,402 [salt.state       :1780][INFO    ][8789] Running state [neutron-dhcp-agent] at time 21:14:50.402507
2019-03-27 21:14:50,402 [salt.state       :1813][INFO    ][8789] Executing state service.running for [neutron-dhcp-agent]
2019-03-27 21:14:50,403 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'status', 'neutron-dhcp-agent.service', '-n', '0'] in directory '/root'
2019-03-27 21:14:50,411 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'neutron-dhcp-agent.service'] in directory '/root'
2019-03-27 21:14:50,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'neutron-dhcp-agent.service'] in directory '/root'
2019-03-27 21:14:50,425 [salt.state       :300 ][INFO    ][8789] The service neutron-dhcp-agent is already running
2019-03-27 21:14:50,425 [salt.state       :1951][INFO    ][8789] Completed state [neutron-dhcp-agent] at time 21:14:50.425543 duration_in_ms=23.037
2019-03-27 21:14:50,425 [salt.state       :1780][INFO    ][8789] Running state [neutron-dhcp-agent] at time 21:14:50.425707
2019-03-27 21:14:50,425 [salt.state       :1813][INFO    ][8789] Executing state service.mod_watch for [neutron-dhcp-agent]
2019-03-27 21:14:50,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'neutron-dhcp-agent.service'] in directory '/root'
2019-03-27 21:14:50,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'neutron-dhcp-agent.service'] in directory '/root'
2019-03-27 21:14:50,521 [salt.state       :300 ][INFO    ][8789] {'neutron-dhcp-agent': True}
2019-03-27 21:14:50,521 [salt.state       :1951][INFO    ][8789] Completed state [neutron-dhcp-agent] at time 21:14:50.521460 duration_in_ms=95.751
2019-03-27 21:14:50,522 [salt.state       :1780][INFO    ][8789] Running state [vpp-agent] at time 21:14:50.522744
2019-03-27 21:14:50,522 [salt.state       :1813][INFO    ][8789] Executing state service.running for [vpp-agent]
2019-03-27 21:14:50,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:50,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-enabled', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:50,537 [salt.state       :300 ][INFO    ][8789] The service vpp-agent is already running
2019-03-27 21:14:50,537 [salt.state       :1951][INFO    ][8789] Completed state [vpp-agent] at time 21:14:50.537872 duration_in_ms=15.128
2019-03-27 21:14:50,538 [salt.state       :1780][INFO    ][8789] Running state [vpp-agent] at time 21:14:50.538036
2019-03-27 21:14:50,538 [salt.state       :1813][INFO    ][8789] Executing state service.mod_watch for [vpp-agent]
2019-03-27 21:14:50,538 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemctl', 'is-active', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:50,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8789] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'vpp-agent.service'] in directory '/root'
2019-03-27 21:14:50,569 [salt.state       :300 ][INFO    ][8789] {'vpp-agent': True}
2019-03-27 21:14:50,569 [salt.state       :1951][INFO    ][8789] Completed state [vpp-agent] at time 21:14:50.569552 duration_in_ms=31.515
2019-03-27 21:14:50,571 [salt.minion      :1711][INFO    ][8789] Returning information for job: 20190327211235843949
2019-03-27 21:16:17,622 [salt.minion      :1308][INFO    ][3099] User sudo_ubuntu Executing command cp.push_dir with jid 20190327211617613074
2019-03-27 21:16:17,632 [salt.minion      :1432][INFO    ][13761] Starting a new job with PID 13761
