2019-02-18 06:52:39,739 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:39,823 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:39,825 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:39,828 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:39,830 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,037 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,040 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,042 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,085 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,088 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,091 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,093 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,170 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,194 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,198 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,201 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,205 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,208 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,211 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,214 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,218 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,221 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,224 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,227 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,230 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,233 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,236 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,239 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,242 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,245 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,248 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,252 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,255 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,258 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,261 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,264 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,267 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,271 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,274 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,277 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,280 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,283 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,286 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,289 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,292 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,295 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,298 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,301 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,304 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,307 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,310 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,313 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,316 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,319 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,322 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,325 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:40,328 [salt.utils.decorators:82  ][ERROR   ][1763] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-18 06:52:58,866 [salt.utils.decorators:613 ][WARNING ][1763] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-18 06:53:00,592 [salt.loaded.int.states.file:2298][WARNING ][1763] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:53:01,475 [salt.loaded.int.states.file:2298][WARNING ][1763] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:53:03,421 [salt.loaded.int.states.file:2298][WARNING ][1763] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:53:06,658 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2981] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2019-02-18 06:53:06,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2981] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2019-02-18 06:53:06,714 [salt.utils.parsers:1051][WARNING ][1401] Minion received a SIGTERM. Exiting.
2019-02-18 06:53:07,555 [salt.cli.daemons :293 ][INFO    ][3040] Setting up the Salt Minion "mdb01.mcp-ovs-dpdk-ha.local"
2019-02-18 06:53:07,646 [salt.cli.daemons :82  ][INFO    ][3040] Starting up the Salt Minion
2019-02-18 06:53:07,647 [salt.utils.event :1017][INFO    ][3040] Starting pull socket on /var/run/salt/minion/minion_event_19308d998f_pull.ipc
2019-02-18 06:53:08,250 [salt.minion      :976 ][INFO    ][3040] Creating minion process manager
2019-02-18 06:53:09,406 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3040] Executing command ['date', '+%z'] in directory '/root'
2019-02-18 06:53:09,423 [salt.utils.schedule:568 ][INFO    ][3040] Updating job settings for scheduled job: __mine_interval
2019-02-18 06:53:09,425 [salt.minion      :1108][INFO    ][3040] Added mine.update to scheduler
2019-02-18 06:53:09,429 [salt.minion      :1975][INFO    ][3040] Minion is starting as user 'root'
2019-02-18 06:53:09,442 [salt.minion      :2336][INFO    ][3040] Minion is ready to receive requests!
2019-02-18 06:53:42,519 [salt.minion      :1308][INFO    ][3040] User sudo_ubuntu Executing command state.apply with jid 20190218065342505497
2019-02-18 06:53:42,533 [salt.minion      :1432][INFO    ][3130] Starting a new job with PID 3130
2019-02-18 06:53:49,675 [salt.state       :915 ][INFO    ][3130] Loading fresh modules for state activity
2019-02-18 06:53:49,954 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2019-02-18 06:53:49,984 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2019-02-18 06:53:50,114 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2019-02-18 06:53:50,211 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2019-02-18 06:53:50,312 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2019-02-18 06:53:50,902 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2019-02-18 06:53:51,060 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2019-02-18 06:53:51,192 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2019-02-18 06:53:51,316 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2019-02-18 06:53:51,488 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2019-02-18 06:53:51,611 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2019-02-18 06:53:51,719 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2019-02-18 06:53:51,899 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2019-02-18 06:53:51,927 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2019-02-18 06:53:52,035 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2019-02-18 06:53:52,150 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2019-02-18 06:53:52,259 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2019-02-18 06:53:52,394 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2019-02-18 06:53:52,504 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2019-02-18 06:53:52,604 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2019-02-18 06:53:53,255 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2019-02-18 06:53:53,390 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2019-02-18 06:53:53,512 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2019-02-18 06:53:53,627 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2019-02-18 06:53:53,738 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2019-02-18 06:53:53,846 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2019-02-18 06:53:53,948 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2019-02-18 06:53:54,107 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2019-02-18 06:53:54,304 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2019-02-18 06:53:54,419 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2019-02-18 06:53:54,526 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2019-02-18 06:53:54,644 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2019-02-18 06:53:54,664 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2019-02-18 06:53:54,707 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2019-02-18 06:53:54,744 [salt.state       :1780][INFO    ][3130] Running state [/etc/environment] at time 06:53:54.744314
2019-02-18 06:53:54,744 [salt.state       :1813][INFO    ][3130] Executing state file.blockreplace for [/etc/environment]
2019-02-18 06:53:54,751 [salt.state       :300 ][INFO    ][3130] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2019-02-18 06:53:54,751 [salt.state       :1951][INFO    ][3130] Completed state [/etc/environment] at time 06:53:54.751181 duration_in_ms=6.869
2019-02-18 06:53:54,751 [salt.state       :1780][INFO    ][3130] Running state [/etc/profile.d] at time 06:53:54.751383
2019-02-18 06:53:54,751 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/profile.d]
2019-02-18 06:53:54,753 [salt.state       :300 ][INFO    ][3130] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2019-02-18 06:53:54,753 [salt.state       :1951][INFO    ][3130] Completed state [/etc/profile.d] at time 06:53:54.753340 duration_in_ms=1.957
2019-02-18 06:53:54,753 [salt.state       :1780][INFO    ][3130] Running state [/etc/bash.bashrc] at time 06:53:54.753521
2019-02-18 06:53:54,753 [salt.state       :1813][INFO    ][3130] Executing state file.blockreplace for [/etc/bash.bashrc]
2019-02-18 06:53:55,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['git', '--version'] in directory '/root'
2019-02-18 06:53:55,575 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2019-02-18 06:53:55,587 [salt.state       :300 ][INFO    ][3130] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-02-18 06:53:55,587 [salt.state       :1951][INFO    ][3130] Completed state [/etc/bash.bashrc] at time 06:53:55.587888 duration_in_ms=834.366
2019-02-18 06:53:55,588 [salt.state       :1780][INFO    ][3130] Running state [/etc/profile] at time 06:53:55.588189
2019-02-18 06:53:55,588 [salt.state       :1813][INFO    ][3130] Executing state file.blockreplace for [/etc/profile]
2019-02-18 06:53:55,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'test -f /etc/profile' in directory '/root'
2019-02-18 06:53:55,605 [salt.state       :300 ][INFO    ][3130] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-02-18 06:53:55,605 [salt.state       :1951][INFO    ][3130] Completed state [/etc/profile] at time 06:53:55.605509 duration_in_ms=17.32
2019-02-18 06:53:55,605 [salt.state       :1780][INFO    ][3130] Running state [/etc/login.defs] at time 06:53:55.605800
2019-02-18 06:53:55,606 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/login.defs]
2019-02-18 06:53:55,629 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2019-02-18 06:53:55,735 [salt.state       :300 ][INFO    ][3130] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2019-02-18 06:53:55,737 [salt.state       :1951][INFO    ][3130] Completed state [/etc/login.defs] at time 06:53:55.736960 duration_in_ms=131.16
2019-02-18 06:53:55,745 [salt.state       :1780][INFO    ][3130] Running state [at] at time 06:53:55.745311
2019-02-18 06:53:55,745 [salt.state       :1813][INFO    ][3130] Executing state pkg.installed for [at]
2019-02-18 06:53:55,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:53:56,025 [salt.state       :300 ][INFO    ][3130] All specified packages are already installed
2019-02-18 06:53:56,025 [salt.state       :1951][INFO    ][3130] Completed state [at] at time 06:53:56.025371 duration_in_ms=280.013
2019-02-18 06:53:56,027 [salt.state       :1780][INFO    ][3130] Running state [atd] at time 06:53:56.027359
2019-02-18 06:53:56,027 [salt.state       :1813][INFO    ][3130] Executing state service.running for [atd]
2019-02-18 06:53:56,028 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2019-02-18 06:53:56,051 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2019-02-18 06:53:56,063 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2019-02-18 06:53:56,074 [salt.state       :300 ][INFO    ][3130] The service atd is already running
2019-02-18 06:53:56,075 [salt.state       :1951][INFO    ][3130] Completed state [atd] at time 06:53:56.075299 duration_in_ms=47.941
2019-02-18 06:53:56,077 [salt.state       :1780][INFO    ][3130] Running state [cron] at time 06:53:56.077667
2019-02-18 06:53:56,078 [salt.state       :1813][INFO    ][3130] Executing state pkg.installed for [cron]
2019-02-18 06:53:56,086 [salt.state       :300 ][INFO    ][3130] All specified packages are already installed
2019-02-18 06:53:56,086 [salt.state       :1951][INFO    ][3130] Completed state [cron] at time 06:53:56.086912 duration_in_ms=9.246
2019-02-18 06:53:56,087 [salt.state       :1780][INFO    ][3130] Running state [/etc/at.allow] at time 06:53:56.087923
2019-02-18 06:53:56,088 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/at.allow]
2019-02-18 06:53:56,107 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2019-02-18 06:53:56,116 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:53:56,117 [salt.state       :1951][INFO    ][3130] Completed state [/etc/at.allow] at time 06:53:56.117429 duration_in_ms=29.506
2019-02-18 06:53:56,117 [salt.state       :1780][INFO    ][3130] Running state [/etc/at.deny] at time 06:53:56.117841
2019-02-18 06:53:56,118 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/at.deny]
2019-02-18 06:53:56,118 [salt.state       :300 ][INFO    ][3130] {'removed': '/etc/at.deny'}
2019-02-18 06:53:56,119 [salt.state       :1951][INFO    ][3130] Completed state [/etc/at.deny] at time 06:53:56.119165 duration_in_ms=1.324
2019-02-18 06:53:56,120 [salt.state       :1780][INFO    ][3130] Running state [cron] at time 06:53:56.120468
2019-02-18 06:53:56,120 [salt.state       :1813][INFO    ][3130] Executing state service.running for [cron]
2019-02-18 06:53:56,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2019-02-18 06:53:56,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2019-02-18 06:53:56,145 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2019-02-18 06:53:56,156 [salt.state       :300 ][INFO    ][3130] The service cron is already running
2019-02-18 06:53:56,157 [salt.state       :1951][INFO    ][3130] Completed state [cron] at time 06:53:56.157465 duration_in_ms=36.997
2019-02-18 06:53:56,159 [salt.state       :1780][INFO    ][3130] Running state [/etc/cron.allow] at time 06:53:56.159071
2019-02-18 06:53:56,159 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/cron.allow]
2019-02-18 06:53:56,181 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:53:56,181 [salt.state       :1951][INFO    ][3130] Completed state [/etc/cron.allow] at time 06:53:56.181795 duration_in_ms=22.723
2019-02-18 06:53:56,182 [salt.state       :1780][INFO    ][3130] Running state [/etc/cron.deny] at time 06:53:56.182218
2019-02-18 06:53:56,182 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/cron.deny]
2019-02-18 06:53:56,183 [salt.state       :300 ][INFO    ][3130] File /etc/cron.deny is not present
2019-02-18 06:53:56,183 [salt.state       :1951][INFO    ][3130] Completed state [/etc/cron.deny] at time 06:53:56.183470 duration_in_ms=1.251
2019-02-18 06:53:56,184 [salt.state       :1780][INFO    ][3130] Running state [/etc/crontab] at time 06:53:56.184539
2019-02-18 06:53:56,184 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/crontab]
2019-02-18 06:53:56,186 [salt.state       :300 ][INFO    ][3130] {'mode': '0600'}
2019-02-18 06:53:56,186 [salt.state       :1951][INFO    ][3130] Completed state [/etc/crontab] at time 06:53:56.186374 duration_in_ms=1.835
2019-02-18 06:53:56,187 [salt.state       :1780][INFO    ][3130] Running state [/etc/cron.d] at time 06:53:56.187499
2019-02-18 06:53:56,187 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/cron.d]
2019-02-18 06:53:56,189 [salt.state       :300 ][INFO    ][3130] {'mode': '0600'}
2019-02-18 06:53:56,189 [salt.state       :1951][INFO    ][3130] Completed state [/etc/cron.d] at time 06:53:56.189609 duration_in_ms=2.11
2019-02-18 06:53:56,190 [salt.state       :1780][INFO    ][3130] Running state [/etc/cron.daily] at time 06:53:56.190653
2019-02-18 06:53:56,191 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/cron.daily]
2019-02-18 06:53:56,193 [salt.state       :300 ][INFO    ][3130] {'mode': '0600'}
2019-02-18 06:53:56,193 [salt.state       :1951][INFO    ][3130] Completed state [/etc/cron.daily] at time 06:53:56.193391 duration_in_ms=2.737
2019-02-18 06:53:56,194 [salt.state       :1780][INFO    ][3130] Running state [/etc/cron.hourly] at time 06:53:56.194452
2019-02-18 06:53:56,194 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/cron.hourly]
2019-02-18 06:53:56,196 [salt.state       :300 ][INFO    ][3130] {'mode': '0600'}
2019-02-18 06:53:56,196 [salt.state       :1951][INFO    ][3130] Completed state [/etc/cron.hourly] at time 06:53:56.196823 duration_in_ms=2.37
2019-02-18 06:53:56,197 [salt.state       :1780][INFO    ][3130] Running state [/etc/cron.monthly] at time 06:53:56.197877
2019-02-18 06:53:56,198 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/cron.monthly]
2019-02-18 06:53:56,199 [salt.state       :300 ][INFO    ][3130] {'mode': '0600'}
2019-02-18 06:53:56,199 [salt.state       :1951][INFO    ][3130] Completed state [/etc/cron.monthly] at time 06:53:56.199897 duration_in_ms=2.02
2019-02-18 06:53:56,201 [salt.state       :1780][INFO    ][3130] Running state [/etc/cron.weekly] at time 06:53:56.200978
2019-02-18 06:53:56,201 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/cron.weekly]
2019-02-18 06:53:56,203 [salt.state       :300 ][INFO    ][3130] {'mode': '0600'}
2019-02-18 06:53:56,203 [salt.state       :1951][INFO    ][3130] Completed state [/etc/cron.weekly] at time 06:53:56.203443 duration_in_ms=2.465
2019-02-18 06:53:56,206 [salt.state       :1780][INFO    ][3130] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 06:53:56.206519
2019-02-18 06:53:56,206 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2019-02-18 06:53:56,228 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2019-02-18 06:53:56,238 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:53:56,239 [salt.state       :1951][INFO    ][3130] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 06:53:56.239179 duration_in_ms=32.659
2019-02-18 06:53:56,239 [salt.state       :1780][INFO    ][3130] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 06:53:56.239613
2019-02-18 06:53:56,240 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2019-02-18 06:53:56,260 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:53:56,261 [salt.state       :1951][INFO    ][3130] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 06:53:56.261137 duration_in_ms=21.524
2019-02-18 06:53:56,262 [salt.state       :1780][INFO    ][3130] Running state [linux_repo_prereq_pkgs] at time 06:53:56.262786
2019-02-18 06:53:56,263 [salt.state       :1813][INFO    ][3130] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2019-02-18 06:53:56,271 [salt.state       :300 ][INFO    ][3130] All specified packages are already installed
2019-02-18 06:53:56,272 [salt.state       :1951][INFO    ][3130] Completed state [linux_repo_prereq_pkgs] at time 06:53:56.271976 duration_in_ms=9.19
2019-02-18 06:53:56,272 [salt.state       :1780][INFO    ][3130] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 06:53:56.272382
2019-02-18 06:53:56,272 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2019-02-18 06:53:56,273 [salt.state       :300 ][INFO    ][3130] File /etc/apt/apt.conf.d/99proxies-salt is not present
2019-02-18 06:53:56,273 [salt.state       :1951][INFO    ][3130] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 06:53:56.273621 duration_in_ms=1.239
2019-02-18 06:53:56,274 [salt.state       :1780][INFO    ][3130] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 06:53:56.274006
2019-02-18 06:53:56,274 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2019-02-18 06:53:56,274 [salt.state       :300 ][INFO    ][3130] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2019-02-18 06:53:56,275 [salt.state       :1951][INFO    ][3130] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 06:53:56.275196 duration_in_ms=1.19
2019-02-18 06:53:56,275 [salt.state       :1780][INFO    ][3130] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 06:53:56.275592
2019-02-18 06:53:56,276 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2019-02-18 06:53:56,291 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2019-02-18 06:53:56,391 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:53:56,392 [salt.state       :1951][INFO    ][3130] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 06:53:56.392236 duration_in_ms=116.643
2019-02-18 06:53:56,395 [salt.state       :1780][INFO    ][3130] Running state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 06:53:56.395006
2019-02-18 06:53:56,395 [salt.state       :1813][INFO    ][3130] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main]
2019-02-18 06:53:56,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-rocky/xenial/archive-rocky.key'] in directory '/root'
2019-02-18 06:53:56,992 [salt.state       :300 ][INFO    ][3130] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main'}
2019-02-18 06:53:56,993 [salt.state       :1951][INFO    ][3130] Completed state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 06:53:56.993836 duration_in_ms=598.827
2019-02-18 06:53:56,994 [salt.state       :1780][INFO    ][3130] Running state [pkg.refresh_db] at time 06:53:56.994442
2019-02-18 06:53:56,995 [salt.state       :1813][INFO    ][3130] Executing state module.run for [pkg.refresh_db]
2019-02-18 06:53:56,995 [salt.utils.decorators:613 ][WARNING ][3130] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-18 06:53:56,996 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 06:53:57,550 [salt.minion      :1308][INFO    ][3040] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218065357541444
2019-02-18 06:53:57,567 [salt.minion      :1432][INFO    ][3653] Starting a new job with PID 3653
2019-02-18 06:53:57,583 [salt.minion      :1711][INFO    ][3653] Returning information for job: 20190218065357541444
2019-02-18 06:54:00,188 [salt.state       :300 ][INFO    ][3130] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial InRelease': True, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial/main amd64 Packages': True}}
2019-02-18 06:54:00,188 [salt.state       :1951][INFO    ][3130] Completed state [pkg.refresh_db] at time 06:54:00.188407 duration_in_ms=3193.964
2019-02-18 06:54:00,188 [salt.state       :1780][INFO    ][3130] Running state [linux_extra_packages_removed] at time 06:54:00.188797
2019-02-18 06:54:00,189 [salt.state       :1813][INFO    ][3130] Executing state pkg.removed for [linux_extra_packages_removed]
2019-02-18 06:54:00,213 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2019-02-18 06:54:01,787 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:54:01,823 [salt.state       :300 ][INFO    ][3130] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2019-02-18 06:54:01,848 [salt.state       :915 ][INFO    ][3130] Loading fresh modules for state activity
2019-02-18 06:54:01,886 [salt.state       :1951][INFO    ][3130] Completed state [linux_extra_packages_removed] at time 06:54:01.886892 duration_in_ms=1698.094
2019-02-18 06:54:01,892 [salt.state       :1780][INFO    ][3130] Running state [linux_extra_packages_latest] at time 06:54:01.892268
2019-02-18 06:54:01,892 [salt.state       :1813][INFO    ][3130] Executing state pkg.latest for [linux_extra_packages_latest]
2019-02-18 06:54:02,641 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2019-02-18 06:54:02,698 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 06:54:02,721 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2019-02-18 06:54:04,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:54:04,883 [salt.state       :300 ][INFO    ][3130] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2019-02-18 06:54:04,905 [salt.state       :915 ][INFO    ][3130] Loading fresh modules for state activity
2019-02-18 06:54:04,943 [salt.state       :1951][INFO    ][3130] Completed state [linux_extra_packages_latest] at time 06:54:04.943451 duration_in_ms=3051.175
2019-02-18 06:54:04,947 [salt.state       :1780][INFO    ][3130] Running state [UTC] at time 06:54:04.947631
2019-02-18 06:54:04,947 [salt.state       :1813][INFO    ][3130] Executing state timezone.system for [UTC]
2019-02-18 06:54:04,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['timedatectl'] in directory '/root'
2019-02-18 06:54:05,056 [salt.state       :300 ][INFO    ][3130] Timezone UTC already set, UTC already set to UTC
2019-02-18 06:54:05,057 [salt.state       :1951][INFO    ][3130] Completed state [UTC] at time 06:54:05.057260 duration_in_ms=109.628
2019-02-18 06:54:05,059 [salt.state       :1780][INFO    ][3130] Running state [/etc/default/grub.d] at time 06:54:05.059810
2019-02-18 06:54:05,060 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/default/grub.d]
2019-02-18 06:54:05,071 [salt.state       :300 ][INFO    ][3130] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2019-02-18 06:54:05,072 [salt.state       :1951][INFO    ][3130] Completed state [/etc/default/grub.d] at time 06:54:05.072203 duration_in_ms=12.392
2019-02-18 06:54:05,073 [salt.state       :1780][INFO    ][3130] Running state [update-grub] at time 06:54:05.073268
2019-02-18 06:54:05,073 [salt.state       :1813][INFO    ][3130] Executing state cmd.wait for [update-grub]
2019-02-18 06:54:05,074 [salt.state       :300 ][INFO    ][3130] No changes made for update-grub
2019-02-18 06:54:05,074 [salt.state       :1951][INFO    ][3130] Completed state [update-grub] at time 06:54:05.074480 duration_in_ms=1.212
2019-02-18 06:54:05,079 [salt.state       :1780][INFO    ][3130] Running state [/boot/grub/grub.cfg] at time 06:54:05.079429
2019-02-18 06:54:05,079 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/boot/grub/grub.cfg]
2019-02-18 06:54:05,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2019-02-18 06:54:05,938 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:05,939 [salt.state       :300 ][INFO    ][3130] {'mode': '0400'}
2019-02-18 06:54:05,940 [salt.state       :1951][INFO    ][3130] Completed state [/boot/grub/grub.cfg] at time 06:54:05.940003 duration_in_ms=860.572
2019-02-18 06:54:05,940 [salt.state       :1780][INFO    ][3130] Running state [nf_conntrack] at time 06:54:05.940386
2019-02-18 06:54:05,940 [salt.state       :1813][INFO    ][3130] Executing state kmod.present for [nf_conntrack]
2019-02-18 06:54:05,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'lsmod' in directory '/root'
2019-02-18 06:54:06,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'lsmod' in directory '/root'
2019-02-18 06:54:06,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'modprobe nf_conntrack' in directory '/root'
2019-02-18 06:54:06,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'lsmod' in directory '/root'
2019-02-18 06:54:06,280 [salt.state       :300 ][INFO    ][3130] {'nf_conntrack': 'loaded'}
2019-02-18 06:54:06,281 [salt.state       :1951][INFO    ][3130] Completed state [nf_conntrack] at time 06:54:06.281039 duration_in_ms=340.653
2019-02-18 06:54:06,281 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d] at time 06:54:06.281366
2019-02-18 06:54:06,281 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/modprobe.d]
2019-02-18 06:54:06,282 [salt.state       :300 ][INFO    ][3130] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2019-02-18 06:54:06,282 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d] at time 06:54:06.282812 duration_in_ms=1.445
2019-02-18 06:54:06,284 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/hfsplus.conf] at time 06:54:06.284843
2019-02-18 06:54:06,285 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2019-02-18 06:54:06,300 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2019-02-18 06:54:06,419 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:06,420 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/hfsplus.conf] at time 06:54:06.420169 duration_in_ms=135.326
2019-02-18 06:54:06,421 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/rds.conf] at time 06:54:06.421551
2019-02-18 06:54:06,421 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2019-02-18 06:54:06,729 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:06,729 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/rds.conf] at time 06:54:06.729587 duration_in_ms=308.035
2019-02-18 06:54:06,730 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/cramfs.conf] at time 06:54:06.730871
2019-02-18 06:54:06,731 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2019-02-18 06:54:06,857 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:06,857 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/cramfs.conf] at time 06:54:06.857865 duration_in_ms=126.994
2019-02-18 06:54:06,859 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/freevxfs.conf] at time 06:54:06.859109
2019-02-18 06:54:06,859 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2019-02-18 06:54:06,984 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:06,984 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/freevxfs.conf] at time 06:54:06.984833 duration_in_ms=125.723
2019-02-18 06:54:06,986 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/hfs.conf] at time 06:54:06.986352
2019-02-18 06:54:06,986 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2019-02-18 06:54:07,111 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:07,111 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/hfs.conf] at time 06:54:07.111645 duration_in_ms=125.293
2019-02-18 06:54:07,113 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/squashfs.conf] at time 06:54:07.113263
2019-02-18 06:54:07,113 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2019-02-18 06:54:07,235 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:07,235 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/squashfs.conf] at time 06:54:07.235381 duration_in_ms=122.118
2019-02-18 06:54:07,236 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/udf.conf] at time 06:54:07.236917
2019-02-18 06:54:07,237 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2019-02-18 06:54:07,358 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:07,358 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/udf.conf] at time 06:54:07.358709 duration_in_ms=121.792
2019-02-18 06:54:07,360 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/vfat.conf] at time 06:54:07.359992
2019-02-18 06:54:07,360 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2019-02-18 06:54:07,489 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:07,489 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/vfat.conf] at time 06:54:07.489806 duration_in_ms=129.814
2019-02-18 06:54:07,491 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/sctp.conf] at time 06:54:07.491070
2019-02-18 06:54:07,491 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2019-02-18 06:54:07,620 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:07,620 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/sctp.conf] at time 06:54:07.620231 duration_in_ms=129.161
2019-02-18 06:54:07,621 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/jffs2.conf] at time 06:54:07.621494
2019-02-18 06:54:07,621 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2019-02-18 06:54:07,748 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:07,748 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/jffs2.conf] at time 06:54:07.748485 duration_in_ms=126.991
2019-02-18 06:54:07,749 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/tipc.conf] at time 06:54:07.749759
2019-02-18 06:54:07,750 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2019-02-18 06:54:07,876 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:07,876 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/tipc.conf] at time 06:54:07.876235 duration_in_ms=126.475
2019-02-18 06:54:07,877 [salt.state       :1780][INFO    ][3130] Running state [/etc/modprobe.d/dccp.conf] at time 06:54:07.877561
2019-02-18 06:54:07,877 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2019-02-18 06:54:08,002 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:08,002 [salt.state       :1951][INFO    ][3130] Completed state [/etc/modprobe.d/dccp.conf] at time 06:54:08.002689 duration_in_ms=125.128
2019-02-18 06:54:08,002 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_congestion_control] at time 06:54:08.002929
2019-02-18 06:54:08,003 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2019-02-18 06:54:08,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2019-02-18 06:54:08,022 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_congestion_control': 'yeah'}
2019-02-18 06:54:08,022 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_congestion_control] at time 06:54:08.022567 duration_in_ms=19.639
2019-02-18 06:54:08,022 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_slow_start_after_idle] at time 06:54:08.022899
2019-02-18 06:54:08,023 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2019-02-18 06:54:08,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2019-02-18 06:54:08,035 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_slow_start_after_idle': 0}
2019-02-18 06:54:08,036 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 06:54:08.036200 duration_in_ms=13.301
2019-02-18 06:54:08,036 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 06:54:08.036596
2019-02-18 06:54:08,036 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2019-02-18 06:54:08,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2019-02-18 06:54:08,049 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2019-02-18 06:54:08,050 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 06:54:08.050252 duration_in_ms=13.656
2019-02-18 06:54:08,050 [salt.state       :1780][INFO    ][3130] Running state [net.nf_conntrack_max] at time 06:54:08.050626
2019-02-18 06:54:08,050 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.nf_conntrack_max]
2019-02-18 06:54:08,051 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2019-02-18 06:54:08,063 [salt.state       :300 ][INFO    ][3130] {'net.nf_conntrack_max': 1048576}
2019-02-18 06:54:08,064 [salt.state       :1951][INFO    ][3130] Completed state [net.nf_conntrack_max] at time 06:54:08.064183 duration_in_ms=13.558
2019-02-18 06:54:08,064 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 06:54:08.064551
2019-02-18 06:54:08,064 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2019-02-18 06:54:08,065 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2019-02-18 06:54:08,077 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2019-02-18 06:54:08,078 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 06:54:08.078155 duration_in_ms=13.604
2019-02-18 06:54:08,078 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.default.log_martians] at time 06:54:08.078503
2019-02-18 06:54:08,078 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2019-02-18 06:54:08,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2019-02-18 06:54:08,092 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.default.log_martians': 1}
2019-02-18 06:54:08,092 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.default.log_martians] at time 06:54:08.092515 duration_in_ms=14.012
2019-02-18 06:54:08,092 [salt.state       :1780][INFO    ][3130] Running state [net.core.somaxconn] at time 06:54:08.092899
2019-02-18 06:54:08,093 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.core.somaxconn]
2019-02-18 06:54:08,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2019-02-18 06:54:08,105 [salt.state       :300 ][INFO    ][3130] {'net.core.somaxconn': 4096}
2019-02-18 06:54:08,106 [salt.state       :1951][INFO    ][3130] Completed state [net.core.somaxconn] at time 06:54:08.106146 duration_in_ms=13.246
2019-02-18 06:54:08,106 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.all.send_redirects] at time 06:54:08.106487
2019-02-18 06:54:08,106 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2019-02-18 06:54:08,107 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2019-02-18 06:54:08,119 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.all.send_redirects': 0}
2019-02-18 06:54:08,120 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.all.send_redirects] at time 06:54:08.119998 duration_in_ms=13.511
2019-02-18 06:54:08,120 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_tw_reuse] at time 06:54:08.120344
2019-02-18 06:54:08,120 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2019-02-18 06:54:08,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2019-02-18 06:54:08,133 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_tw_reuse': 1}
2019-02-18 06:54:08,133 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_tw_reuse] at time 06:54:08.133443 duration_in_ms=13.098
2019-02-18 06:54:08,133 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.default.rp_filter] at time 06:54:08.133780
2019-02-18 06:54:08,134 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2019-02-18 06:54:08,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2019-02-18 06:54:08,146 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.default.rp_filter': 1}
2019-02-18 06:54:08,147 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.default.rp_filter] at time 06:54:08.146942 duration_in_ms=13.162
2019-02-18 06:54:08,147 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_fin_timeout] at time 06:54:08.147296
2019-02-18 06:54:08,147 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2019-02-18 06:54:08,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2019-02-18 06:54:08,160 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_fin_timeout': 30}
2019-02-18 06:54:08,160 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_fin_timeout] at time 06:54:08.160408 duration_in_ms=13.112
2019-02-18 06:54:08,160 [salt.state       :1780][INFO    ][3130] Running state [kernel.panic] at time 06:54:08.160770
2019-02-18 06:54:08,161 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [kernel.panic]
2019-02-18 06:54:08,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2019-02-18 06:54:08,174 [salt.state       :300 ][INFO    ][3130] {'kernel.panic': 60}
2019-02-18 06:54:08,174 [salt.state       :1951][INFO    ][3130] Completed state [kernel.panic] at time 06:54:08.174571 duration_in_ms=13.801
2019-02-18 06:54:08,174 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_keepalive_probes] at time 06:54:08.174931
2019-02-18 06:54:08,175 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2019-02-18 06:54:08,176 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2019-02-18 06:54:08,188 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_keepalive_probes': 8}
2019-02-18 06:54:08,188 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_keepalive_probes] at time 06:54:08.188578 duration_in_ms=13.647
2019-02-18 06:54:08,188 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.all.log_martians] at time 06:54:08.188933
2019-02-18 06:54:08,189 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2019-02-18 06:54:08,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2019-02-18 06:54:08,202 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.all.log_martians': 1}
2019-02-18 06:54:08,202 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.all.log_martians] at time 06:54:08.202835 duration_in_ms=13.901
2019-02-18 06:54:08,203 [salt.state       :1780][INFO    ][3130] Running state [fs.suid_dumpable] at time 06:54:08.203246
2019-02-18 06:54:08,203 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [fs.suid_dumpable]
2019-02-18 06:54:08,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2019-02-18 06:54:08,216 [salt.state       :300 ][INFO    ][3130] {'fs.suid_dumpable': 0}
2019-02-18 06:54:08,217 [salt.state       :1951][INFO    ][3130] Completed state [fs.suid_dumpable] at time 06:54:08.217083 duration_in_ms=13.837
2019-02-18 06:54:08,217 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.default.accept_redirects] at time 06:54:08.217443
2019-02-18 06:54:08,217 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2019-02-18 06:54:08,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2019-02-18 06:54:08,230 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.default.accept_redirects': 0}
2019-02-18 06:54:08,231 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.default.accept_redirects] at time 06:54:08.231025 duration_in_ms=13.582
2019-02-18 06:54:08,231 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.default.secure_redirects] at time 06:54:08.231401
2019-02-18 06:54:08,231 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2019-02-18 06:54:08,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2019-02-18 06:54:08,244 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.default.secure_redirects': 0}
2019-02-18 06:54:08,245 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.default.secure_redirects] at time 06:54:08.245040 duration_in_ms=13.639
2019-02-18 06:54:08,245 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.default.accept_source_route] at time 06:54:08.245385
2019-02-18 06:54:08,245 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2019-02-18 06:54:08,246 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2019-02-18 06:54:08,258 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.default.accept_source_route': 0}
2019-02-18 06:54:08,259 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.default.accept_source_route] at time 06:54:08.259180 duration_in_ms=13.795
2019-02-18 06:54:08,259 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_keepalive_intvl] at time 06:54:08.259547
2019-02-18 06:54:08,259 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2019-02-18 06:54:08,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2019-02-18 06:54:08,272 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_keepalive_intvl': 3}
2019-02-18 06:54:08,273 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_keepalive_intvl] at time 06:54:08.273123 duration_in_ms=13.576
2019-02-18 06:54:08,273 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_keepalive_time] at time 06:54:08.273478
2019-02-18 06:54:08,273 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2019-02-18 06:54:08,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2019-02-18 06:54:08,287 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_keepalive_time': 30}
2019-02-18 06:54:08,287 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_keepalive_time] at time 06:54:08.287480 duration_in_ms=14.002
2019-02-18 06:54:08,287 [salt.state       :1780][INFO    ][3130] Running state [kernel.randomize_va_space] at time 06:54:08.287832
2019-02-18 06:54:08,288 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [kernel.randomize_va_space]
2019-02-18 06:54:08,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2019-02-18 06:54:08,301 [salt.state       :300 ][INFO    ][3130] {'kernel.randomize_va_space': 2}
2019-02-18 06:54:08,301 [salt.state       :1951][INFO    ][3130] Completed state [kernel.randomize_va_space] at time 06:54:08.301767 duration_in_ms=13.935
2019-02-18 06:54:08,302 [salt.state       :1780][INFO    ][3130] Running state [fs.file-max] at time 06:54:08.302113
2019-02-18 06:54:08,302 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [fs.file-max]
2019-02-18 06:54:08,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2019-02-18 06:54:08,315 [salt.state       :300 ][INFO    ][3130] {'fs.file-max': 124165}
2019-02-18 06:54:08,315 [salt.state       :1951][INFO    ][3130] Completed state [fs.file-max] at time 06:54:08.315776 duration_in_ms=13.663
2019-02-18 06:54:08,316 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_syncookies] at time 06:54:08.316122
2019-02-18 06:54:08,316 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2019-02-18 06:54:08,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2019-02-18 06:54:08,329 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_syncookies': 1}
2019-02-18 06:54:08,329 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_syncookies] at time 06:54:08.329750 duration_in_ms=13.628
2019-02-18 06:54:08,330 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_max_syn_backlog] at time 06:54:08.330117
2019-02-18 06:54:08,330 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2019-02-18 06:54:08,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2019-02-18 06:54:08,343 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_max_syn_backlog': 8192}
2019-02-18 06:54:08,344 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_max_syn_backlog] at time 06:54:08.344007 duration_in_ms=13.89
2019-02-18 06:54:08,344 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.all.rp_filter] at time 06:54:08.344381
2019-02-18 06:54:08,344 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2019-02-18 06:54:08,345 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2019-02-18 06:54:08,357 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.all.rp_filter': 1}
2019-02-18 06:54:08,357 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.all.rp_filter] at time 06:54:08.357743 duration_in_ms=13.362
2019-02-18 06:54:08,358 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.all.accept_source_route] at time 06:54:08.358082
2019-02-18 06:54:08,358 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2019-02-18 06:54:08,359 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2019-02-18 06:54:08,371 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.all.accept_source_route': 0}
2019-02-18 06:54:08,371 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.all.accept_source_route] at time 06:54:08.371685 duration_in_ms=13.603
2019-02-18 06:54:08,372 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.tcp_retries2] at time 06:54:08.372022
2019-02-18 06:54:08,372 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2019-02-18 06:54:08,373 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2019-02-18 06:54:08,384 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.tcp_retries2': 5}
2019-02-18 06:54:08,385 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.tcp_retries2] at time 06:54:08.385187 duration_in_ms=13.164
2019-02-18 06:54:08,385 [salt.state       :1780][INFO    ][3130] Running state [net.core.netdev_max_backlog] at time 06:54:08.385526
2019-02-18 06:54:08,385 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.core.netdev_max_backlog]
2019-02-18 06:54:08,386 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2019-02-18 06:54:08,398 [salt.state       :300 ][INFO    ][3130] {'net.core.netdev_max_backlog': 261144}
2019-02-18 06:54:08,398 [salt.state       :1951][INFO    ][3130] Completed state [net.core.netdev_max_backlog] at time 06:54:08.398740 duration_in_ms=13.214
2019-02-18 06:54:08,399 [salt.state       :1780][INFO    ][3130] Running state [vm.swappiness] at time 06:54:08.399128
2019-02-18 06:54:08,399 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [vm.swappiness]
2019-02-18 06:54:08,400 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2019-02-18 06:54:08,412 [salt.state       :300 ][INFO    ][3130] {'vm.swappiness': 10}
2019-02-18 06:54:08,413 [salt.state       :1951][INFO    ][3130] Completed state [vm.swappiness] at time 06:54:08.413066 duration_in_ms=13.937
2019-02-18 06:54:08,413 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.all.secure_redirects] at time 06:54:08.413413
2019-02-18 06:54:08,413 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2019-02-18 06:54:08,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2019-02-18 06:54:08,427 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.all.secure_redirects': 0}
2019-02-18 06:54:08,427 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.all.secure_redirects] at time 06:54:08.427433 duration_in_ms=14.019
2019-02-18 06:54:08,427 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.neigh.default.gc_thresh1] at time 06:54:08.427776
2019-02-18 06:54:08,428 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2019-02-18 06:54:08,429 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2019-02-18 06:54:08,441 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2019-02-18 06:54:08,441 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 06:54:08.441730 duration_in_ms=13.955
2019-02-18 06:54:08,442 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.neigh.default.gc_thresh2] at time 06:54:08.442147
2019-02-18 06:54:08,442 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2019-02-18 06:54:08,443 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2019-02-18 06:54:08,455 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2019-02-18 06:54:08,456 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 06:54:08.456107 duration_in_ms=13.959
2019-02-18 06:54:08,456 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.neigh.default.gc_thresh3] at time 06:54:08.456526
2019-02-18 06:54:08,456 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2019-02-18 06:54:08,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2019-02-18 06:54:08,470 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2019-02-18 06:54:08,470 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 06:54:08.470388 duration_in_ms=13.861
2019-02-18 06:54:08,470 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.default.send_redirects] at time 06:54:08.470723
2019-02-18 06:54:08,471 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2019-02-18 06:54:08,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2019-02-18 06:54:08,484 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.default.send_redirects': 0}
2019-02-18 06:54:08,484 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.default.send_redirects] at time 06:54:08.484588 duration_in_ms=13.864
2019-02-18 06:54:08,485 [salt.state       :1780][INFO    ][3130] Running state [net.ipv4.conf.all.accept_redirects] at time 06:54:08.485022
2019-02-18 06:54:08,485 [salt.state       :1813][INFO    ][3130] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2019-02-18 06:54:08,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2019-02-18 06:54:08,498 [salt.state       :300 ][INFO    ][3130] {'net.ipv4.conf.all.accept_redirects': 0}
2019-02-18 06:54:08,498 [salt.state       :1951][INFO    ][3130] Completed state [net.ipv4.conf.all.accept_redirects] at time 06:54:08.498438 duration_in_ms=13.416
2019-02-18 06:54:08,498 [salt.state       :1780][INFO    ][3130] Running state [linux_sysfs_package] at time 06:54:08.498787
2019-02-18 06:54:08,499 [salt.state       :1813][INFO    ][3130] Executing state pkg.installed for [linux_sysfs_package]
2019-02-18 06:54:08,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2019-02-18 06:54:08,647 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 06:54:10,089 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 06:54:10,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2019-02-18 06:54:12,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:54:12,934 [salt.state       :300 ][INFO    ][3130] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2019-02-18 06:54:12,955 [salt.state       :915 ][INFO    ][3130] Loading fresh modules for state activity
2019-02-18 06:54:12,997 [salt.state       :1951][INFO    ][3130] Completed state [linux_sysfs_package] at time 06:54:12.997067 duration_in_ms=4498.279
2019-02-18 06:54:13,003 [salt.state       :1780][INFO    ][3130] Running state [/etc/sysfs.d] at time 06:54:13.003765
2019-02-18 06:54:13,004 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/etc/sysfs.d]
2019-02-18 06:54:13,009 [salt.state       :300 ][INFO    ][3130] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2019-02-18 06:54:13,009 [salt.state       :1951][INFO    ][3130] Completed state [/etc/sysfs.d] at time 06:54:13.009293 duration_in_ms=5.527
2019-02-18 06:54:13,010 [salt.state       :1780][INFO    ][3130] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 06:54:13.010935
2019-02-18 06:54:13,011 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2019-02-18 06:54:13,029 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/sysfs.conf'
2019-02-18 06:54:13,044 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:13,044 [salt.state       :1951][INFO    ][3130] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 06:54:13.044889 duration_in_ms=33.954
2019-02-18 06:54:13,045 [salt.state       :1780][INFO    ][3130] Running state [sysfs.write] at time 06:54:13.045866
2019-02-18 06:54:13,046 [salt.state       :1813][INFO    ][3130] Executing state module.run for [sysfs.write]
2019-02-18 06:54:13,046 [salt.utils.decorators:613 ][WARNING ][3130] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-18 06:54:13,049 [salt.state       :300 ][INFO    ][3130] {'ret': True}
2019-02-18 06:54:13,049 [salt.state       :1951][INFO    ][3130] Completed state [sysfs.write] at time 06:54:13.049669 duration_in_ms=3.802
2019-02-18 06:54:13,503 [salt.state       :1780][INFO    ][3130] Running state [ondemand] at time 06:54:13.503318
2019-02-18 06:54:13,504 [salt.state       :1813][INFO    ][3130] Executing state service.dead for [ondemand]
2019-02-18 06:54:13,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2019-02-18 06:54:13,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-02-18 06:54:13,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-02-18 06:54:13,554 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2019-02-18 06:54:13,610 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-02-18 06:54:13,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-02-18 06:54:13,645 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-02-18 06:54:13,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2019-02-18 06:54:13,804 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-02-18 06:54:13,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'runlevel' in directory '/root'
2019-02-18 06:54:13,840 [salt.state       :300 ][INFO    ][3130] {'ondemand': True}
2019-02-18 06:54:13,841 [salt.state       :1951][INFO    ][3130] Completed state [ondemand] at time 06:54:13.841108 duration_in_ms=337.791
2019-02-18 06:54:13,842 [salt.state       :1780][INFO    ][3130] Running state [en_US.UTF-8] at time 06:54:13.842377
2019-02-18 06:54:13,842 [salt.state       :1813][INFO    ][3130] Executing state locale.present for [en_US.UTF-8]
2019-02-18 06:54:13,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'locale -a' in directory '/root'
2019-02-18 06:54:13,856 [salt.state       :300 ][INFO    ][3130] Locale en_US.UTF-8 is already present
2019-02-18 06:54:13,856 [salt.state       :1951][INFO    ][3130] Completed state [en_US.UTF-8] at time 06:54:13.856491 duration_in_ms=14.113
2019-02-18 06:54:13,859 [salt.state       :1780][INFO    ][3130] Running state [en_US.UTF-8] at time 06:54:13.859090
2019-02-18 06:54:13,859 [salt.state       :1813][INFO    ][3130] Executing state locale.system for [en_US.UTF-8]
2019-02-18 06:54:13,860 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'localectl' in directory '/root'
2019-02-18 06:54:13,900 [salt.state       :300 ][INFO    ][3130] System locale en_US.UTF-8 already set
2019-02-18 06:54:13,901 [salt.state       :1951][INFO    ][3130] Completed state [en_US.UTF-8] at time 06:54:13.901031 duration_in_ms=41.941
2019-02-18 06:54:13,902 [salt.state       :1780][INFO    ][3130] Running state [root] at time 06:54:13.902456
2019-02-18 06:54:13,902 [salt.state       :1813][INFO    ][3130] Executing state group.present for [root]
2019-02-18 06:54:13,903 [salt.state       :300 ][INFO    ][3130] Group root is present and up to date
2019-02-18 06:54:13,904 [salt.state       :1951][INFO    ][3130] Completed state [root] at time 06:54:13.904651 duration_in_ms=2.195
2019-02-18 06:54:13,907 [salt.state       :1780][INFO    ][3130] Running state [root] at time 06:54:13.907447
2019-02-18 06:54:13,909 [salt.state       :1813][INFO    ][3130] Executing state user.present for [root]
2019-02-18 06:54:13,914 [salt.state       :300 ][INFO    ][3130] User root is present and up to date
2019-02-18 06:54:13,914 [salt.state       :1951][INFO    ][3130] Completed state [root] at time 06:54:13.914499 duration_in_ms=7.052
2019-02-18 06:54:13,916 [salt.state       :1780][INFO    ][3130] Running state [/root] at time 06:54:13.916076
2019-02-18 06:54:13,916 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/root]
2019-02-18 06:54:13,917 [salt.state       :300 ][INFO    ][3130] Directory /root is in the correct state
Directory /root updated
2019-02-18 06:54:13,917 [salt.state       :1951][INFO    ][3130] Completed state [/root] at time 06:54:13.917517 duration_in_ms=1.441
2019-02-18 06:54:13,917 [salt.state       :1780][INFO    ][3130] Running state [/etc/sudoers.d/90-salt-user-root] at time 06:54:13.917721
2019-02-18 06:54:13,917 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2019-02-18 06:54:13,918 [salt.state       :300 ][INFO    ][3130] File /etc/sudoers.d/90-salt-user-root is not present
2019-02-18 06:54:13,918 [salt.state       :1951][INFO    ][3130] Completed state [/etc/sudoers.d/90-salt-user-root] at time 06:54:13.918483 duration_in_ms=0.762
2019-02-18 06:54:13,918 [salt.state       :1780][INFO    ][3130] Running state [ubuntu] at time 06:54:13.918724
2019-02-18 06:54:13,919 [salt.state       :1813][INFO    ][3130] Executing state group.present for [ubuntu]
2019-02-18 06:54:13,919 [salt.state       :300 ][INFO    ][3130] Group ubuntu is present and up to date
2019-02-18 06:54:13,919 [salt.state       :1951][INFO    ][3130] Completed state [ubuntu] at time 06:54:13.919583 duration_in_ms=0.86
2019-02-18 06:54:13,920 [salt.state       :1780][INFO    ][3130] Running state [ubuntu] at time 06:54:13.920944
2019-02-18 06:54:13,921 [salt.state       :1813][INFO    ][3130] Executing state user.present for [ubuntu]
2019-02-18 06:54:13,924 [salt.state       :300 ][INFO    ][3130] {'passwd': 'XXX-REDACTED-XXX'}
2019-02-18 06:54:13,924 [salt.state       :1951][INFO    ][3130] Completed state [ubuntu] at time 06:54:13.924729 duration_in_ms=3.785
2019-02-18 06:54:13,926 [salt.state       :1780][INFO    ][3130] Running state [/home/ubuntu] at time 06:54:13.926203
2019-02-18 06:54:13,926 [salt.state       :1813][INFO    ][3130] Executing state file.directory for [/home/ubuntu]
2019-02-18 06:54:13,927 [salt.state       :300 ][INFO    ][3130] {'mode': '0700'}
2019-02-18 06:54:13,927 [salt.state       :1951][INFO    ][3130] Completed state [/home/ubuntu] at time 06:54:13.927706 duration_in_ms=1.503
2019-02-18 06:54:13,929 [salt.state       :1780][INFO    ][3130] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 06:54:13.929005
2019-02-18 06:54:13,929 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2019-02-18 06:54:13,951 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2019-02-18 06:54:13,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.JGS3Lj' in directory '/root'
2019-02-18 06:54:13,982 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:13,982 [salt.state       :1951][INFO    ][3130] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 06:54:13.982697 duration_in_ms=53.69
2019-02-18 06:54:13,983 [salt.state       :1780][INFO    ][3130] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 06:54:13.983113
2019-02-18 06:54:13,983 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2019-02-18 06:54:14,002 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2019-02-18 06:54:14,105 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:14,105 [salt.state       :1951][INFO    ][3130] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 06:54:14.105423 duration_in_ms=122.31
2019-02-18 06:54:14,105 [salt.state       :1780][INFO    ][3130] Running state [/etc/security/limits.d/90-salt-default.conf] at time 06:54:14.105738
2019-02-18 06:54:14,106 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2019-02-18 06:54:14,216 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:14,217 [salt.state       :1951][INFO    ][3130] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 06:54:14.216991 duration_in_ms=111.252
2019-02-18 06:54:14,217 [salt.state       :1780][INFO    ][3130] Running state [apt-daily.timer] at time 06:54:14.217342
2019-02-18 06:54:14,217 [salt.state       :1813][INFO    ][3130] Executing state service.dead for [apt-daily.timer]
2019-02-18 06:54:14,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2019-02-18 06:54:14,233 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,262 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,282 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,298 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,313 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,333 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:54:14,454 [salt.state       :300 ][INFO    ][3130] {'apt-daily.timer': True}
2019-02-18 06:54:14,454 [salt.state       :1951][INFO    ][3130] Completed state [apt-daily.timer] at time 06:54:14.454543 duration_in_ms=237.2
2019-02-18 06:54:14,454 [salt.state       :1780][INFO    ][3130] Running state [autofs] at time 06:54:14.454928
2019-02-18 06:54:14,455 [salt.state       :1813][INFO    ][3130] Executing state service.disabled for [autofs]
2019-02-18 06:54:14,456 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2019-02-18 06:54:14,472 [salt.state       :300 ][INFO    ][3130] The named service autofs is not available
2019-02-18 06:54:14,472 [salt.state       :1951][INFO    ][3130] Completed state [autofs] at time 06:54:14.472492 duration_in_ms=17.564
2019-02-18 06:54:14,472 [salt.state       :1780][INFO    ][3130] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 06:54:14.472930
2019-02-18 06:54:14,473 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2019-02-18 06:54:14,488 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2019-02-18 06:54:14,592 [salt.state       :300 ][INFO    ][3130] File changed:
New file
2019-02-18 06:54:14,592 [salt.state       :1951][INFO    ][3130] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 06:54:14.592792 duration_in_ms=119.861
2019-02-18 06:54:14,594 [salt.state       :1780][INFO    ][3130] Running state [service.systemctl_reload] at time 06:54:14.594651
2019-02-18 06:54:14,594 [salt.state       :1813][INFO    ][3130] Executing state module.wait for [service.systemctl_reload]
2019-02-18 06:54:14,595 [salt.state       :300 ][INFO    ][3130] No changes made for service.systemctl_reload
2019-02-18 06:54:14,595 [salt.state       :1951][INFO    ][3130] Completed state [service.systemctl_reload] at time 06:54:14.595409 duration_in_ms=0.758
2019-02-18 06:54:14,595 [salt.state       :1780][INFO    ][3130] Running state [service.systemctl_reload] at time 06:54:14.595610
2019-02-18 06:54:14,595 [salt.state       :1813][INFO    ][3130] Executing state module.mod_watch for [service.systemctl_reload]
2019-02-18 06:54:14,596 [salt.utils.decorators:613 ][WARNING ][3130] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-18 06:54:14,596 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2019-02-18 06:54:14,696 [salt.state       :300 ][INFO    ][3130] {'ret': True}
2019-02-18 06:54:14,697 [salt.state       :1951][INFO    ][3130] Completed state [service.systemctl_reload] at time 06:54:14.697141 duration_in_ms=101.531
2019-02-18 06:54:14,697 [salt.state       :1780][INFO    ][3130] Running state [/etc/shadow] at time 06:54:14.697588
2019-02-18 06:54:14,697 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/shadow]
2019-02-18 06:54:14,698 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,699 [salt.state       :300 ][INFO    ][3130] File /etc/shadow exists with proper permissions. No changes made.
2019-02-18 06:54:14,699 [salt.state       :1951][INFO    ][3130] Completed state [/etc/shadow] at time 06:54:14.699544 duration_in_ms=1.956
2019-02-18 06:54:14,699 [salt.state       :1780][INFO    ][3130] Running state [/etc/gshadow] at time 06:54:14.699765
2019-02-18 06:54:14,700 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/gshadow]
2019-02-18 06:54:14,700 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,700 [salt.state       :300 ][INFO    ][3130] File /etc/gshadow exists with proper permissions. No changes made.
2019-02-18 06:54:14,701 [salt.state       :1951][INFO    ][3130] Completed state [/etc/gshadow] at time 06:54:14.701119 duration_in_ms=1.354
2019-02-18 06:54:14,701 [salt.state       :1780][INFO    ][3130] Running state [/etc/group-] at time 06:54:14.701327
2019-02-18 06:54:14,701 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/group-]
2019-02-18 06:54:14,701 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,702 [salt.state       :300 ][INFO    ][3130] File /etc/group- exists with proper permissions. No changes made.
2019-02-18 06:54:14,702 [salt.state       :1951][INFO    ][3130] Completed state [/etc/group-] at time 06:54:14.702583 duration_in_ms=1.256
2019-02-18 06:54:14,702 [salt.state       :1780][INFO    ][3130] Running state [/etc/shadow-] at time 06:54:14.702790
2019-02-18 06:54:14,703 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/shadow-]
2019-02-18 06:54:14,703 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,703 [salt.state       :300 ][INFO    ][3130] File /etc/shadow- exists with proper permissions. No changes made.
2019-02-18 06:54:14,704 [salt.state       :1951][INFO    ][3130] Completed state [/etc/shadow-] at time 06:54:14.704053 duration_in_ms=1.263
2019-02-18 06:54:14,704 [salt.state       :1780][INFO    ][3130] Running state [/etc/passwd-] at time 06:54:14.704271
2019-02-18 06:54:14,706 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/passwd-]
2019-02-18 06:54:14,707 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,707 [salt.state       :300 ][INFO    ][3130] File /etc/passwd- exists with proper permissions. No changes made.
2019-02-18 06:54:14,708 [salt.state       :1951][INFO    ][3130] Completed state [/etc/passwd-] at time 06:54:14.708028 duration_in_ms=3.758
2019-02-18 06:54:14,708 [salt.state       :1780][INFO    ][3130] Running state [/etc/passwd] at time 06:54:14.708252
2019-02-18 06:54:14,708 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/passwd]
2019-02-18 06:54:14,708 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,709 [salt.state       :300 ][INFO    ][3130] File /etc/passwd exists with proper permissions. No changes made.
2019-02-18 06:54:14,709 [salt.state       :1951][INFO    ][3130] Completed state [/etc/passwd] at time 06:54:14.709591 duration_in_ms=1.339
2019-02-18 06:54:14,709 [salt.state       :1780][INFO    ][3130] Running state [/etc/gshadow-] at time 06:54:14.709801
2019-02-18 06:54:14,710 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/gshadow-]
2019-02-18 06:54:14,710 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,710 [salt.state       :300 ][INFO    ][3130] File /etc/gshadow- exists with proper permissions. No changes made.
2019-02-18 06:54:14,711 [salt.state       :1951][INFO    ][3130] Completed state [/etc/gshadow-] at time 06:54:14.711056 duration_in_ms=1.254
2019-02-18 06:54:14,711 [salt.state       :1780][INFO    ][3130] Running state [/etc/group] at time 06:54:14.711269
2019-02-18 06:54:14,711 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/group]
2019-02-18 06:54:14,711 [salt.loaded.int.states.file:2298][WARNING ][3130] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:54:14,712 [salt.state       :300 ][INFO    ][3130] File /etc/group exists with proper permissions. No changes made.
2019-02-18 06:54:14,712 [salt.state       :1951][INFO    ][3130] Completed state [/etc/group] at time 06:54:14.712541 duration_in_ms=1.271
2019-02-18 06:54:14,712 [salt.state       :1780][INFO    ][3130] Running state [/etc/issue] at time 06:54:14.712767
2019-02-18 06:54:14,713 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/issue]
2019-02-18 06:54:14,715 [salt.state       :300 ][INFO    ][3130] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2019-02-18 06:54:14,715 [salt.state       :1951][INFO    ][3130] Completed state [/etc/issue] at time 06:54:14.715586 duration_in_ms=2.819
2019-02-18 06:54:14,715 [salt.state       :1780][INFO    ][3130] Running state [/etc/hostname] at time 06:54:14.715799
2019-02-18 06:54:14,716 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/hostname]
2019-02-18 06:54:14,737 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2019-02-18 06:54:14,747 [salt.state       :300 ][INFO    ][3130] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2019-02-18 06:54:14,747 [salt.state       :1951][INFO    ][3130] Completed state [/etc/hostname] at time 06:54:14.747539 duration_in_ms=31.739
2019-02-18 06:54:14,750 [salt.state       :1780][INFO    ][3130] Running state [hostname mdb01] at time 06:54:14.750262
2019-02-18 06:54:14,750 [salt.state       :1813][INFO    ][3130] Executing state cmd.run for [hostname mdb01]
2019-02-18 06:54:14,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2019-02-18 06:54:14,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'hostname mdb01' in directory '/root'
2019-02-18 06:54:14,777 [salt.state       :300 ][INFO    ][3130] {'pid': 5179, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-02-18 06:54:14,777 [salt.state       :1951][INFO    ][3130] Completed state [hostname mdb01] at time 06:54:14.777828 duration_in_ms=27.566
2019-02-18 06:54:14,779 [salt.state       :1780][INFO    ][3130] Running state [mdb02] at time 06:54:14.779411
2019-02-18 06:54:14,779 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb02]
2019-02-18 06:54:14,781 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb02'}
2019-02-18 06:54:14,781 [salt.state       :1951][INFO    ][3130] Completed state [mdb02] at time 06:54:14.781230 duration_in_ms=1.818
2019-02-18 06:54:14,781 [salt.state       :1780][INFO    ][3130] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 06:54:14.781662
2019-02-18 06:54:14,781 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,782 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,782 [salt.state       :1951][INFO    ][3130] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 06:54:14.782926 duration_in_ms=1.264
2019-02-18 06:54:14,783 [salt.state       :1780][INFO    ][3130] Running state [mdb03] at time 06:54:14.783307
2019-02-18 06:54:14,783 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb03]
2019-02-18 06:54:14,784 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb03'}
2019-02-18 06:54:14,784 [salt.state       :1951][INFO    ][3130] Completed state [mdb03] at time 06:54:14.784598 duration_in_ms=1.291
2019-02-18 06:54:14,784 [salt.state       :1780][INFO    ][3130] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 06:54:14.784948
2019-02-18 06:54:14,785 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,786 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,786 [salt.state       :1951][INFO    ][3130] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 06:54:14.786195 duration_in_ms=1.248
2019-02-18 06:54:14,786 [salt.state       :1780][INFO    ][3130] Running state [mdb01] at time 06:54:14.786551
2019-02-18 06:54:14,786 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb01]
2019-02-18 06:54:14,787 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb01'}
2019-02-18 06:54:14,787 [salt.state       :1951][INFO    ][3130] Completed state [mdb01] at time 06:54:14.787862 duration_in_ms=1.31
2019-02-18 06:54:14,788 [salt.state       :1780][INFO    ][3130] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 06:54:14.788217
2019-02-18 06:54:14,788 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,789 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,789 [salt.state       :1951][INFO    ][3130] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 06:54:14.789512 duration_in_ms=1.296
2019-02-18 06:54:14,789 [salt.state       :1780][INFO    ][3130] Running state [mdb] at time 06:54:14.789877
2019-02-18 06:54:14,790 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb]
2019-02-18 06:54:14,792 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb'}
2019-02-18 06:54:14,792 [salt.state       :1951][INFO    ][3130] Completed state [mdb] at time 06:54:14.792912 duration_in_ms=3.035
2019-02-18 06:54:14,793 [salt.state       :1780][INFO    ][3130] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 06:54:14.793276
2019-02-18 06:54:14,793 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,794 [salt.state       :300 ][INFO    ][3130] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,794 [salt.state       :1951][INFO    ][3130] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 06:54:14.794586 duration_in_ms=1.31
2019-02-18 06:54:14,795 [salt.state       :1780][INFO    ][3130] Running state [cfg01] at time 06:54:14.794965
2019-02-18 06:54:14,795 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cfg01]
2019-02-18 06:54:14,796 [salt.state       :300 ][INFO    ][3130] {'host': 'cfg01'}
2019-02-18 06:54:14,796 [salt.state       :1951][INFO    ][3130] Completed state [cfg01] at time 06:54:14.796262 duration_in_ms=1.296
2019-02-18 06:54:14,796 [salt.state       :1780][INFO    ][3130] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:54:14.796649
2019-02-18 06:54:14,796 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,797 [salt.state       :300 ][INFO    ][3130] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,797 [salt.state       :1951][INFO    ][3130] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:54:14.797943 duration_in_ms=1.295
2019-02-18 06:54:14,798 [salt.state       :1780][INFO    ][3130] Running state [prx01] at time 06:54:14.798315
2019-02-18 06:54:14,798 [salt.state       :1813][INFO    ][3130] Executing state host.present for [prx01]
2019-02-18 06:54:14,799 [salt.state       :300 ][INFO    ][3130] {'host': 'prx01'}
2019-02-18 06:54:14,799 [salt.state       :1951][INFO    ][3130] Completed state [prx01] at time 06:54:14.799578 duration_in_ms=1.264
2019-02-18 06:54:14,799 [salt.state       :1780][INFO    ][3130] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 06:54:14.799948
2019-02-18 06:54:14,800 [salt.state       :1813][INFO    ][3130] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,801 [salt.state       :300 ][INFO    ][3130] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,801 [salt.state       :1951][INFO    ][3130] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 06:54:14.801259 duration_in_ms=1.31
2019-02-18 06:54:14,801 [salt.state       :1780][INFO    ][3130] Running state [kvm01] at time 06:54:14.801638
2019-02-18 06:54:14,801 [salt.state       :1813][INFO    ][3130] Executing state host.present for [kvm01]
2019-02-18 06:54:14,802 [salt.state       :300 ][INFO    ][3130] {'host': 'kvm01'}
2019-02-18 06:54:14,802 [salt.state       :1951][INFO    ][3130] Completed state [kvm01] at time 06:54:14.802930 duration_in_ms=1.292
2019-02-18 06:54:14,803 [salt.state       :1780][INFO    ][3130] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 06:54:14.803312
2019-02-18 06:54:14,803 [salt.state       :1813][INFO    ][3130] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,804 [salt.state       :300 ][INFO    ][3130] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,804 [salt.state       :1951][INFO    ][3130] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 06:54:14.804648 duration_in_ms=1.336
2019-02-18 06:54:14,805 [salt.state       :1780][INFO    ][3130] Running state [kvm03] at time 06:54:14.805020
2019-02-18 06:54:14,805 [salt.state       :1813][INFO    ][3130] Executing state host.present for [kvm03]
2019-02-18 06:54:14,806 [salt.state       :300 ][INFO    ][3130] {'host': 'kvm03'}
2019-02-18 06:54:14,806 [salt.state       :1951][INFO    ][3130] Completed state [kvm03] at time 06:54:14.806347 duration_in_ms=1.327
2019-02-18 06:54:14,806 [salt.state       :1780][INFO    ][3130] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 06:54:14.806820
2019-02-18 06:54:14,807 [salt.state       :1813][INFO    ][3130] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,808 [salt.state       :300 ][INFO    ][3130] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,808 [salt.state       :1951][INFO    ][3130] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 06:54:14.808216 duration_in_ms=1.395
2019-02-18 06:54:14,808 [salt.state       :1780][INFO    ][3130] Running state [kvm02] at time 06:54:14.808602
2019-02-18 06:54:14,808 [salt.state       :1813][INFO    ][3130] Executing state host.present for [kvm02]
2019-02-18 06:54:14,809 [salt.state       :300 ][INFO    ][3130] {'host': 'kvm02'}
2019-02-18 06:54:14,810 [salt.state       :1951][INFO    ][3130] Completed state [kvm02] at time 06:54:14.809953 duration_in_ms=1.35
2019-02-18 06:54:14,810 [salt.state       :1780][INFO    ][3130] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 06:54:14.810327
2019-02-18 06:54:14,810 [salt.state       :1813][INFO    ][3130] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,811 [salt.state       :300 ][INFO    ][3130] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,811 [salt.state       :1951][INFO    ][3130] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 06:54:14.811684 duration_in_ms=1.357
2019-02-18 06:54:14,812 [salt.state       :1780][INFO    ][3130] Running state [dbs] at time 06:54:14.812055
2019-02-18 06:54:14,812 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs]
2019-02-18 06:54:14,813 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs'}
2019-02-18 06:54:14,813 [salt.state       :1951][INFO    ][3130] Completed state [dbs] at time 06:54:14.813440 duration_in_ms=1.385
2019-02-18 06:54:14,813 [salt.state       :1780][INFO    ][3130] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 06:54:14.813810
2019-02-18 06:54:14,814 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,814 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,815 [salt.state       :1951][INFO    ][3130] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 06:54:14.815175 duration_in_ms=1.365
2019-02-18 06:54:14,815 [salt.state       :1780][INFO    ][3130] Running state [prx] at time 06:54:14.815564
2019-02-18 06:54:14,815 [salt.state       :1813][INFO    ][3130] Executing state host.present for [prx]
2019-02-18 06:54:14,816 [salt.state       :300 ][INFO    ][3130] {'host': 'prx'}
2019-02-18 06:54:14,817 [salt.state       :1951][INFO    ][3130] Completed state [prx] at time 06:54:14.817013 duration_in_ms=1.449
2019-02-18 06:54:14,817 [salt.state       :1780][INFO    ][3130] Running state [prx.mcp-ovs-dpdk-ha.local] at time 06:54:14.817399
2019-02-18 06:54:14,817 [salt.state       :1813][INFO    ][3130] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,818 [salt.state       :300 ][INFO    ][3130] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,819 [salt.state       :1951][INFO    ][3130] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 06:54:14.818951 duration_in_ms=1.553
2019-02-18 06:54:14,819 [salt.state       :1780][INFO    ][3130] Running state [prx02] at time 06:54:14.819349
2019-02-18 06:54:14,819 [salt.state       :1813][INFO    ][3130] Executing state host.present for [prx02]
2019-02-18 06:54:14,820 [salt.state       :300 ][INFO    ][3130] {'host': 'prx02'}
2019-02-18 06:54:14,820 [salt.state       :1951][INFO    ][3130] Completed state [prx02] at time 06:54:14.820739 duration_in_ms=1.39
2019-02-18 06:54:14,821 [salt.state       :1780][INFO    ][3130] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 06:54:14.821116
2019-02-18 06:54:14,821 [salt.state       :1813][INFO    ][3130] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,822 [salt.state       :300 ][INFO    ][3130] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,822 [salt.state       :1951][INFO    ][3130] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 06:54:14.822583 duration_in_ms=1.467
2019-02-18 06:54:14,823 [salt.state       :1780][INFO    ][3130] Running state [msg02] at time 06:54:14.822997
2019-02-18 06:54:14,823 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg02]
2019-02-18 06:54:14,824 [salt.state       :300 ][INFO    ][3130] {'host': 'msg02'}
2019-02-18 06:54:14,824 [salt.state       :1951][INFO    ][3130] Completed state [msg02] at time 06:54:14.824438 duration_in_ms=1.441
2019-02-18 06:54:14,824 [salt.state       :1780][INFO    ][3130] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 06:54:14.824820
2019-02-18 06:54:14,825 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,826 [salt.state       :300 ][INFO    ][3130] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,826 [salt.state       :1951][INFO    ][3130] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 06:54:14.826234 duration_in_ms=1.414
2019-02-18 06:54:14,826 [salt.state       :1780][INFO    ][3130] Running state [msg03] at time 06:54:14.826618
2019-02-18 06:54:14,826 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg03]
2019-02-18 06:54:14,827 [salt.state       :300 ][INFO    ][3130] {'host': 'msg03'}
2019-02-18 06:54:14,828 [salt.state       :1951][INFO    ][3130] Completed state [msg03] at time 06:54:14.828052 duration_in_ms=1.434
2019-02-18 06:54:14,828 [salt.state       :1780][INFO    ][3130] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 06:54:14.828422
2019-02-18 06:54:14,828 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,829 [salt.state       :300 ][INFO    ][3130] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,829 [salt.state       :1951][INFO    ][3130] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 06:54:14.829866 duration_in_ms=1.443
2019-02-18 06:54:14,830 [salt.state       :1780][INFO    ][3130] Running state [msg01] at time 06:54:14.830249
2019-02-18 06:54:14,830 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg01]
2019-02-18 06:54:14,831 [salt.state       :300 ][INFO    ][3130] {'host': 'msg01'}
2019-02-18 06:54:14,831 [salt.state       :1951][INFO    ][3130] Completed state [msg01] at time 06:54:14.831707 duration_in_ms=1.458
2019-02-18 06:54:14,832 [salt.state       :1780][INFO    ][3130] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 06:54:14.832096
2019-02-18 06:54:14,832 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,833 [salt.state       :300 ][INFO    ][3130] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,833 [salt.state       :1951][INFO    ][3130] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 06:54:14.833557 duration_in_ms=1.46
2019-02-18 06:54:14,833 [salt.state       :1780][INFO    ][3130] Running state [msg] at time 06:54:14.833939
2019-02-18 06:54:14,834 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg]
2019-02-18 06:54:14,835 [salt.state       :300 ][INFO    ][3130] {'host': 'msg'}
2019-02-18 06:54:14,835 [salt.state       :1951][INFO    ][3130] Completed state [msg] at time 06:54:14.835346 duration_in_ms=1.406
2019-02-18 06:54:14,835 [salt.state       :1780][INFO    ][3130] Running state [msg.mcp-ovs-dpdk-ha.local] at time 06:54:14.835712
2019-02-18 06:54:14,835 [salt.state       :1813][INFO    ][3130] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,837 [salt.state       :300 ][INFO    ][3130] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,837 [salt.state       :1951][INFO    ][3130] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 06:54:14.837249 duration_in_ms=1.537
2019-02-18 06:54:14,837 [salt.state       :1780][INFO    ][3130] Running state [cfg01] at time 06:54:14.837602
2019-02-18 06:54:14,837 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cfg01]
2019-02-18 06:54:14,838 [salt.state       :300 ][INFO    ][3130] Host cfg01 (192.168.10.11) already present
2019-02-18 06:54:14,838 [salt.state       :1951][INFO    ][3130] Completed state [cfg01] at time 06:54:14.838436 duration_in_ms=0.834
2019-02-18 06:54:14,838 [salt.state       :1780][INFO    ][3130] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:54:14.838774
2019-02-18 06:54:14,839 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,839 [salt.state       :300 ][INFO    ][3130] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2019-02-18 06:54:14,839 [salt.state       :1951][INFO    ][3130] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:54:14.839652 duration_in_ms=0.878
2019-02-18 06:54:14,840 [salt.state       :1780][INFO    ][3130] Running state [cmp002] at time 06:54:14.840009
2019-02-18 06:54:14,840 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cmp002]
2019-02-18 06:54:14,841 [salt.state       :300 ][INFO    ][3130] {'host': 'cmp002'}
2019-02-18 06:54:14,841 [salt.state       :1951][INFO    ][3130] Completed state [cmp002] at time 06:54:14.841635 duration_in_ms=1.626
2019-02-18 06:54:14,842 [salt.state       :1780][INFO    ][3130] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 06:54:14.842023
2019-02-18 06:54:14,842 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,843 [salt.state       :300 ][INFO    ][3130] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,843 [salt.state       :1951][INFO    ][3130] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 06:54:14.843469 duration_in_ms=1.446
2019-02-18 06:54:14,843 [salt.state       :1780][INFO    ][3130] Running state [cmp001] at time 06:54:14.843859
2019-02-18 06:54:14,844 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cmp001]
2019-02-18 06:54:14,845 [salt.state       :300 ][INFO    ][3130] {'host': 'cmp001'}
2019-02-18 06:54:14,845 [salt.state       :1951][INFO    ][3130] Completed state [cmp001] at time 06:54:14.845377 duration_in_ms=1.518
2019-02-18 06:54:14,845 [salt.state       :1780][INFO    ][3130] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 06:54:14.845753
2019-02-18 06:54:14,845 [salt.state       :1813][INFO    ][3130] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,847 [salt.state       :300 ][INFO    ][3130] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,847 [salt.state       :1951][INFO    ][3130] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 06:54:14.847190 duration_in_ms=1.438
2019-02-18 06:54:14,847 [salt.state       :1780][INFO    ][3130] Running state [dbs01] at time 06:54:14.847589
2019-02-18 06:54:14,847 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs01]
2019-02-18 06:54:14,848 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs01'}
2019-02-18 06:54:14,849 [salt.state       :1951][INFO    ][3130] Completed state [dbs01] at time 06:54:14.849167 duration_in_ms=1.578
2019-02-18 06:54:14,849 [salt.state       :1780][INFO    ][3130] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 06:54:14.849565
2019-02-18 06:54:14,849 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,850 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,851 [salt.state       :1951][INFO    ][3130] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 06:54:14.851023 duration_in_ms=1.458
2019-02-18 06:54:14,851 [salt.state       :1780][INFO    ][3130] Running state [dbs02] at time 06:54:14.851443
2019-02-18 06:54:14,851 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs02]
2019-02-18 06:54:14,852 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs02'}
2019-02-18 06:54:14,853 [salt.state       :1951][INFO    ][3130] Completed state [dbs02] at time 06:54:14.853000 duration_in_ms=1.557
2019-02-18 06:54:14,853 [salt.state       :1780][INFO    ][3130] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 06:54:14.853382
2019-02-18 06:54:14,853 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,854 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,854 [salt.state       :1951][INFO    ][3130] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 06:54:14.854883 duration_in_ms=1.5
2019-02-18 06:54:14,855 [salt.state       :1780][INFO    ][3130] Running state [dbs03] at time 06:54:14.855281
2019-02-18 06:54:14,855 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs03]
2019-02-18 06:54:14,856 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs03'}
2019-02-18 06:54:14,857 [salt.state       :1951][INFO    ][3130] Completed state [dbs03] at time 06:54:14.857094 duration_in_ms=1.813
2019-02-18 06:54:14,857 [salt.state       :1780][INFO    ][3130] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 06:54:14.857491
2019-02-18 06:54:14,857 [salt.state       :1813][INFO    ][3130] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,858 [salt.state       :300 ][INFO    ][3130] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,859 [salt.state       :1951][INFO    ][3130] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 06:54:14.858980 duration_in_ms=1.49
2019-02-18 06:54:14,859 [salt.state       :1780][INFO    ][3130] Running state [mas01] at time 06:54:14.859397
2019-02-18 06:54:14,859 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mas01]
2019-02-18 06:54:14,860 [salt.state       :300 ][INFO    ][3130] {'host': 'mas01'}
2019-02-18 06:54:14,861 [salt.state       :1951][INFO    ][3130] Completed state [mas01] at time 06:54:14.860945 duration_in_ms=1.548
2019-02-18 06:54:14,861 [salt.state       :1780][INFO    ][3130] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 06:54:14.861336
2019-02-18 06:54:14,861 [salt.state       :1813][INFO    ][3130] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,862 [salt.state       :300 ][INFO    ][3130] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,862 [salt.state       :1951][INFO    ][3130] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 06:54:14.862833 duration_in_ms=1.496
2019-02-18 06:54:14,863 [salt.state       :1780][INFO    ][3130] Running state [ctl02] at time 06:54:14.863215
2019-02-18 06:54:14,863 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl02]
2019-02-18 06:54:14,864 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl02'}
2019-02-18 06:54:14,864 [salt.state       :1951][INFO    ][3130] Completed state [ctl02] at time 06:54:14.864744 duration_in_ms=1.528
2019-02-18 06:54:14,865 [salt.state       :1780][INFO    ][3130] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 06:54:14.865136
2019-02-18 06:54:14,865 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,866 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,866 [salt.state       :1951][INFO    ][3130] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 06:54:14.866636 duration_in_ms=1.5
2019-02-18 06:54:14,867 [salt.state       :1780][INFO    ][3130] Running state [ctl03] at time 06:54:14.867051
2019-02-18 06:54:14,867 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl03]
2019-02-18 06:54:14,868 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl03'}
2019-02-18 06:54:14,868 [salt.state       :1951][INFO    ][3130] Completed state [ctl03] at time 06:54:14.868646 duration_in_ms=1.596
2019-02-18 06:54:14,869 [salt.state       :1780][INFO    ][3130] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 06:54:14.869019
2019-02-18 06:54:14,869 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,870 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,870 [salt.state       :1951][INFO    ][3130] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 06:54:14.870581 duration_in_ms=1.562
2019-02-18 06:54:14,871 [salt.state       :1780][INFO    ][3130] Running state [ctl01] at time 06:54:14.870967
2019-02-18 06:54:14,871 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl01]
2019-02-18 06:54:14,872 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl01'}
2019-02-18 06:54:14,872 [salt.state       :1951][INFO    ][3130] Completed state [ctl01] at time 06:54:14.872717 duration_in_ms=1.75
2019-02-18 06:54:14,873 [salt.state       :1780][INFO    ][3130] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 06:54:14.873112
2019-02-18 06:54:14,873 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,874 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,874 [salt.state       :1951][INFO    ][3130] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 06:54:14.874689 duration_in_ms=1.576
2019-02-18 06:54:14,875 [salt.state       :1780][INFO    ][3130] Running state [ctl] at time 06:54:14.875098
2019-02-18 06:54:14,875 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl]
2019-02-18 06:54:14,876 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl'}
2019-02-18 06:54:14,876 [salt.state       :1951][INFO    ][3130] Completed state [ctl] at time 06:54:14.876676 duration_in_ms=1.578
2019-02-18 06:54:14,877 [salt.state       :1780][INFO    ][3130] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 06:54:14.877091
2019-02-18 06:54:14,877 [salt.state       :1813][INFO    ][3130] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2019-02-18 06:54:14,878 [salt.state       :300 ][INFO    ][3130] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2019-02-18 06:54:14,878 [salt.state       :1951][INFO    ][3130] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 06:54:14.878661 duration_in_ms=1.57
2019-02-18 06:54:14,878 [salt.state       :1780][INFO    ][3130] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 06:54:14.878912
2019-02-18 06:54:14,879 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2019-02-18 06:54:14,879 [salt.state       :300 ][INFO    ][3130] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2019-02-18 06:54:14,879 [salt.state       :1951][INFO    ][3130] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 06:54:14.879753 duration_in_ms=0.84
2019-02-18 06:54:14,880 [salt.state       :1780][INFO    ][3130] Running state [ens3] at time 06:54:14.880538
2019-02-18 06:54:14,880 [salt.state       :1813][INFO    ][3130] Executing state network.managed for [ens3]
2019-02-18 06:54:15,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['ifup', 'ens3'] in directory '/root'
2019-02-18 06:54:15,653 [salt.state       :300 ][INFO    ][3130] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2019-02-18 06:54:15,653 [salt.state       :1951][INFO    ][3130] Completed state [ens3] at time 06:54:15.653413 duration_in_ms=772.875
2019-02-18 06:54:15,653 [salt.state       :1780][INFO    ][3130] Running state [ens2] at time 06:54:15.653764
2019-02-18 06:54:15,654 [salt.state       :1813][INFO    ][3130] Executing state network.managed for [ens2]
2019-02-18 06:54:15,681 [salt.state       :300 ][INFO    ][3130] {'interface': 'Added network interface.'}
2019-02-18 06:54:15,682 [salt.state       :1951][INFO    ][3130] Completed state [ens2] at time 06:54:15.682084 duration_in_ms=28.319
2019-02-18 06:54:15,682 [salt.state       :1780][INFO    ][3130] Running state [linux_system_network] at time 06:54:15.682503
2019-02-18 06:54:15,682 [salt.state       :1813][INFO    ][3130] Executing state network.system for [linux_system_network]
2019-02-18 06:54:15,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2019-02-18 06:54:15,699 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2019-02-18 06:54:15,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2019-02-18 06:54:15,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2019-02-18 06:54:16,173 [salt.loaded.int.module.debian_ip:1964][WARNING ][3130] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-02-18 06:54:16,173 [salt.state       :300 ][INFO    ][3130] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2019-02-18 06:54:16,173 [salt.state       :1951][INFO    ][3130] Completed state [linux_system_network] at time 06:54:16.173819 duration_in_ms=491.316
2019-02-18 06:54:16,174 [salt.state       :1780][INFO    ][3130] Running state [/etc/profile.d/proxy.sh] at time 06:54:16.174181
2019-02-18 06:54:16,174 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/profile.d/proxy.sh]
2019-02-18 06:54:16,175 [salt.state       :300 ][INFO    ][3130] File /etc/profile.d/proxy.sh is not present
2019-02-18 06:54:16,175 [salt.state       :1951][INFO    ][3130] Completed state [/etc/profile.d/proxy.sh] at time 06:54:16.175163 duration_in_ms=0.983
2019-02-18 06:54:16,175 [salt.state       :1780][INFO    ][3130] Running state [/etc/apt/apt.conf.d/95proxies] at time 06:54:16.175394
2019-02-18 06:54:16,175 [salt.state       :1813][INFO    ][3130] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2019-02-18 06:54:16,175 [salt.state       :300 ][INFO    ][3130] File /etc/apt/apt.conf.d/95proxies is not present
2019-02-18 06:54:16,176 [salt.state       :1951][INFO    ][3130] Completed state [/etc/apt/apt.conf.d/95proxies] at time 06:54:16.176044 duration_in_ms=0.651
2019-02-18 06:54:16,178 [salt.state       :1780][INFO    ][3130] Running state [/dev/shm] at time 06:54:16.178235
2019-02-18 06:54:16,178 [salt.state       :1813][INFO    ][3130] Executing state mount.mounted for [/dev/shm]
2019-02-18 06:54:16,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'mount -l' in directory '/root'
2019-02-18 06:54:16,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'blkid' in directory '/root'
2019-02-18 06:54:16,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'mount -l' in directory '/root'
2019-02-18 06:54:16,221 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-02-18 06:54:16,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'mount -l' in directory '/root'
2019-02-18 06:54:16,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-02-18 06:54:16,259 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'mount -l' in directory '/root'
2019-02-18 06:54:16,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'umount /dev/shm' in directory '/root'
2019-02-18 06:54:16,283 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3130] Command '['umount', '/dev/shm']' failed with return code: 32
2019-02-18 06:54:16,284 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3130] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-02-18 06:54:16,284 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3130] retcode: 32
2019-02-18 06:54:16,284 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'mount -l' in directory '/root'
2019-02-18 06:54:16,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command 'blkid' in directory '/root'
2019-02-18 06:54:16,308 [salt.state       :300 ][INFO    ][3130] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2019-02-18 06:54:16,308 [salt.state       :1951][INFO    ][3130] Completed state [/dev/shm] at time 06:54:16.308914 duration_in_ms=130.679
2019-02-18 06:54:16,310 [salt.state       :1780][INFO    ][3130] Running state [ntp] at time 06:54:16.310877
2019-02-18 06:54:16,311 [salt.state       :1813][INFO    ][3130] Executing state pkg.installed for [ntp]
2019-02-18 06:54:16,508 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 06:54:16,528 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2019-02-18 06:54:19,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:54:19,716 [salt.state       :300 ][INFO    ][3130] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2019-02-18 06:54:19,738 [salt.state       :915 ][INFO    ][3130] Loading fresh modules for state activity
2019-02-18 06:54:19,780 [salt.state       :1951][INFO    ][3130] Completed state [ntp] at time 06:54:19.780819 duration_in_ms=3469.941
2019-02-18 06:54:19,786 [salt.state       :1780][INFO    ][3130] Running state [/etc/ntp.conf] at time 06:54:19.786565
2019-02-18 06:54:19,787 [salt.state       :1813][INFO    ][3130] Executing state file.managed for [/etc/ntp.conf]
2019-02-18 06:54:19,807 [salt.fileclient  :1219][INFO    ][3130] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2019-02-18 06:54:19,872 [salt.state       :300 ][INFO    ][3130] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2019-02-18 06:54:19,879 [salt.state       :1951][INFO    ][3130] Completed state [/etc/ntp.conf] at time 06:54:19.879569 duration_in_ms=93.004
2019-02-18 06:54:20,358 [salt.state       :1780][INFO    ][3130] Running state [ntp] at time 06:54:20.358043
2019-02-18 06:54:20,358 [salt.state       :1813][INFO    ][3130] Executing state service.running for [ntp]
2019-02-18 06:54:20,359 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2019-02-18 06:54:20,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-02-18 06:54:20,389 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2019-02-18 06:54:20,405 [salt.state       :300 ][INFO    ][3130] The service ntp is already running
2019-02-18 06:54:20,405 [salt.state       :1951][INFO    ][3130] Completed state [ntp] at time 06:54:20.405505 duration_in_ms=47.462
2019-02-18 06:54:20,405 [salt.state       :1780][INFO    ][3130] Running state [ntp] at time 06:54:20.405790
2019-02-18 06:54:20,406 [salt.state       :1813][INFO    ][3130] Executing state service.mod_watch for [ntp]
2019-02-18 06:54:20,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-02-18 06:54:20,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3130] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2019-02-18 06:54:20,490 [salt.state       :300 ][INFO    ][3130] {'ntp': True}
2019-02-18 06:54:20,490 [salt.state       :1951][INFO    ][3130] Completed state [ntp] at time 06:54:20.490533 duration_in_ms=84.742
2019-02-18 06:54:20,498 [salt.minion      :1711][INFO    ][3130] Returning information for job: 20190218065342505497
2019-02-18 06:55:08,768 [salt.minion      :1308][INFO    ][3040] User sudo_ubuntu Executing command state.apply with jid 20190218065508764038
2019-02-18 06:55:08,782 [salt.minion      :1432][INFO    ][6382] Starting a new job with PID 6382
2019-02-18 06:55:14,993 [salt.state       :915 ][INFO    ][6382] Loading fresh modules for state activity
2019-02-18 06:55:18,658 [salt.state       :1780][INFO    ][6382] Running state [/etc/environment] at time 06:55:18.658585
2019-02-18 06:55:18,659 [salt.state       :1813][INFO    ][6382] Executing state file.blockreplace for [/etc/environment]
2019-02-18 06:55:18,664 [salt.state       :300 ][INFO    ][6382] No changes needed to be made
2019-02-18 06:55:18,665 [salt.state       :1951][INFO    ][6382] Completed state [/etc/environment] at time 06:55:18.665142 duration_in_ms=6.558
2019-02-18 06:55:18,665 [salt.state       :1780][INFO    ][6382] Running state [/etc/profile.d] at time 06:55:18.665637
2019-02-18 06:55:18,666 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/profile.d]
2019-02-18 06:55:18,667 [salt.state       :300 ][INFO    ][6382] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2019-02-18 06:55:18,668 [salt.state       :1951][INFO    ][6382] Completed state [/etc/profile.d] at time 06:55:18.668347 duration_in_ms=2.71
2019-02-18 06:55:18,668 [salt.state       :1780][INFO    ][6382] Running state [/etc/bash.bashrc] at time 06:55:18.668831
2019-02-18 06:55:18,669 [salt.state       :1813][INFO    ][6382] Executing state file.blockreplace for [/etc/bash.bashrc]
2019-02-18 06:55:19,367 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['git', '--version'] in directory '/root'
2019-02-18 06:55:19,568 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2019-02-18 06:55:19,582 [salt.state       :300 ][INFO    ][6382] No changes needed to be made
2019-02-18 06:55:19,582 [salt.state       :1951][INFO    ][6382] Completed state [/etc/bash.bashrc] at time 06:55:19.582890 duration_in_ms=914.058
2019-02-18 06:55:19,583 [salt.state       :1780][INFO    ][6382] Running state [/etc/profile] at time 06:55:19.583469
2019-02-18 06:55:19,584 [salt.state       :1813][INFO    ][6382] Executing state file.blockreplace for [/etc/profile]
2019-02-18 06:55:19,589 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'test -f /etc/profile' in directory '/root'
2019-02-18 06:55:19,602 [salt.state       :300 ][INFO    ][6382] No changes needed to be made
2019-02-18 06:55:19,602 [salt.state       :1951][INFO    ][6382] Completed state [/etc/profile] at time 06:55:19.602811 duration_in_ms=19.342
2019-02-18 06:55:19,603 [salt.state       :1780][INFO    ][6382] Running state [/etc/login.defs] at time 06:55:19.603370
2019-02-18 06:55:19,603 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/login.defs]
2019-02-18 06:55:19,738 [salt.state       :300 ][INFO    ][6382] File /etc/login.defs is in the correct state
2019-02-18 06:55:19,739 [salt.state       :1951][INFO    ][6382] Completed state [/etc/login.defs] at time 06:55:19.739270 duration_in_ms=135.898
2019-02-18 06:55:19,747 [salt.state       :1780][INFO    ][6382] Running state [at] at time 06:55:19.747392
2019-02-18 06:55:19,747 [salt.state       :1813][INFO    ][6382] Executing state pkg.installed for [at]
2019-02-18 06:55:19,748 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:55:20,059 [salt.state       :300 ][INFO    ][6382] All specified packages are already installed
2019-02-18 06:55:20,061 [salt.state       :1951][INFO    ][6382] Completed state [at] at time 06:55:20.061123 duration_in_ms=313.731
2019-02-18 06:55:20,063 [salt.state       :1780][INFO    ][6382] Running state [atd] at time 06:55:20.063477
2019-02-18 06:55:20,063 [salt.state       :1813][INFO    ][6382] Executing state service.running for [atd]
2019-02-18 06:55:20,064 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2019-02-18 06:55:20,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2019-02-18 06:55:20,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2019-02-18 06:55:20,120 [salt.state       :300 ][INFO    ][6382] The service atd is already running
2019-02-18 06:55:20,121 [salt.state       :1951][INFO    ][6382] Completed state [atd] at time 06:55:20.121432 duration_in_ms=57.954
2019-02-18 06:55:20,124 [salt.state       :1780][INFO    ][6382] Running state [cron] at time 06:55:20.124217
2019-02-18 06:55:20,124 [salt.state       :1813][INFO    ][6382] Executing state pkg.installed for [cron]
2019-02-18 06:55:20,134 [salt.state       :300 ][INFO    ][6382] All specified packages are already installed
2019-02-18 06:55:20,135 [salt.state       :1951][INFO    ][6382] Completed state [cron] at time 06:55:20.135160 duration_in_ms=10.944
2019-02-18 06:55:20,136 [salt.state       :1780][INFO    ][6382] Running state [/etc/at.allow] at time 06:55:20.136245
2019-02-18 06:55:20,136 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/at.allow]
2019-02-18 06:55:20,158 [salt.state       :300 ][INFO    ][6382] File /etc/at.allow is in the correct state
2019-02-18 06:55:20,159 [salt.state       :1951][INFO    ][6382] Completed state [/etc/at.allow] at time 06:55:20.158969 duration_in_ms=22.723
2019-02-18 06:55:20,159 [salt.state       :1780][INFO    ][6382] Running state [/etc/at.deny] at time 06:55:20.159390
2019-02-18 06:55:20,159 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/at.deny]
2019-02-18 06:55:20,160 [salt.state       :300 ][INFO    ][6382] File /etc/at.deny is not present
2019-02-18 06:55:20,160 [salt.state       :1951][INFO    ][6382] Completed state [/etc/at.deny] at time 06:55:20.160746 duration_in_ms=1.356
2019-02-18 06:55:20,162 [salt.state       :1780][INFO    ][6382] Running state [cron] at time 06:55:20.162158
2019-02-18 06:55:20,162 [salt.state       :1813][INFO    ][6382] Executing state service.running for [cron]
2019-02-18 06:55:20,163 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2019-02-18 06:55:20,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2019-02-18 06:55:20,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2019-02-18 06:55:20,206 [salt.state       :300 ][INFO    ][6382] The service cron is already running
2019-02-18 06:55:20,206 [salt.state       :1951][INFO    ][6382] Completed state [cron] at time 06:55:20.206905 duration_in_ms=44.747
2019-02-18 06:55:20,209 [salt.state       :1780][INFO    ][6382] Running state [/etc/cron.allow] at time 06:55:20.208963
2019-02-18 06:55:20,209 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/cron.allow]
2019-02-18 06:55:20,233 [salt.state       :300 ][INFO    ][6382] File /etc/cron.allow is in the correct state
2019-02-18 06:55:20,233 [salt.state       :1951][INFO    ][6382] Completed state [/etc/cron.allow] at time 06:55:20.233582 duration_in_ms=24.619
2019-02-18 06:55:20,234 [salt.state       :1780][INFO    ][6382] Running state [/etc/cron.deny] at time 06:55:20.234020
2019-02-18 06:55:20,234 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/cron.deny]
2019-02-18 06:55:20,235 [salt.state       :300 ][INFO    ][6382] File /etc/cron.deny is not present
2019-02-18 06:55:20,235 [salt.state       :1951][INFO    ][6382] Completed state [/etc/cron.deny] at time 06:55:20.235379 duration_in_ms=1.359
2019-02-18 06:55:20,236 [salt.state       :1780][INFO    ][6382] Running state [/etc/crontab] at time 06:55:20.236548
2019-02-18 06:55:20,236 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/crontab]
2019-02-18 06:55:20,237 [salt.state       :300 ][INFO    ][6382] File /etc/crontab exists with proper permissions. No changes made.
2019-02-18 06:55:20,238 [salt.state       :1951][INFO    ][6382] Completed state [/etc/crontab] at time 06:55:20.238209 duration_in_ms=1.661
2019-02-18 06:55:20,239 [salt.state       :1780][INFO    ][6382] Running state [/etc/cron.d] at time 06:55:20.239399
2019-02-18 06:55:20,239 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/cron.d]
2019-02-18 06:55:20,241 [salt.state       :300 ][INFO    ][6382] Directory /etc/cron.d is in the correct state
Directory /etc/cron.d updated
2019-02-18 06:55:20,241 [salt.state       :1951][INFO    ][6382] Completed state [/etc/cron.d] at time 06:55:20.241535 duration_in_ms=2.136
2019-02-18 06:55:20,242 [salt.state       :1780][INFO    ][6382] Running state [/etc/cron.daily] at time 06:55:20.242676
2019-02-18 06:55:20,243 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/cron.daily]
2019-02-18 06:55:20,244 [salt.state       :300 ][INFO    ][6382] Directory /etc/cron.daily is in the correct state
Directory /etc/cron.daily updated
2019-02-18 06:55:20,244 [salt.state       :1951][INFO    ][6382] Completed state [/etc/cron.daily] at time 06:55:20.244906 duration_in_ms=2.242
2019-02-18 06:55:20,246 [salt.state       :1780][INFO    ][6382] Running state [/etc/cron.hourly] at time 06:55:20.246077
2019-02-18 06:55:20,246 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/cron.hourly]
2019-02-18 06:55:20,247 [salt.state       :300 ][INFO    ][6382] Directory /etc/cron.hourly is in the correct state
Directory /etc/cron.hourly updated
2019-02-18 06:55:20,248 [salt.state       :1951][INFO    ][6382] Completed state [/etc/cron.hourly] at time 06:55:20.248073 duration_in_ms=1.996
2019-02-18 06:55:20,249 [salt.state       :1780][INFO    ][6382] Running state [/etc/cron.monthly] at time 06:55:20.249209
2019-02-18 06:55:20,249 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/cron.monthly]
2019-02-18 06:55:20,250 [salt.state       :300 ][INFO    ][6382] Directory /etc/cron.monthly is in the correct state
Directory /etc/cron.monthly updated
2019-02-18 06:55:20,251 [salt.state       :1951][INFO    ][6382] Completed state [/etc/cron.monthly] at time 06:55:20.251259 duration_in_ms=2.05
2019-02-18 06:55:20,252 [salt.state       :1780][INFO    ][6382] Running state [/etc/cron.weekly] at time 06:55:20.252427
2019-02-18 06:55:20,252 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/cron.weekly]
2019-02-18 06:55:20,254 [salt.state       :300 ][INFO    ][6382] Directory /etc/cron.weekly is in the correct state
Directory /etc/cron.weekly updated
2019-02-18 06:55:20,254 [salt.state       :1951][INFO    ][6382] Completed state [/etc/cron.weekly] at time 06:55:20.254585 duration_in_ms=2.158
2019-02-18 06:55:20,258 [salt.state       :1780][INFO    ][6382] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 06:55:20.258059
2019-02-18 06:55:20,258 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2019-02-18 06:55:20,282 [salt.state       :300 ][INFO    ][6382] File /etc/apt/apt.conf.d/99prefer_ipv4-salt is in the correct state
2019-02-18 06:55:20,282 [salt.state       :1951][INFO    ][6382] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 06:55:20.282529 duration_in_ms=24.461
2019-02-18 06:55:20,283 [salt.state       :1780][INFO    ][6382] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 06:55:20.282975
2019-02-18 06:55:20,283 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2019-02-18 06:55:20,306 [salt.state       :300 ][INFO    ][6382] File /etc/apt/apt.conf.d/99allow_downgrades-salt is in the correct state
2019-02-18 06:55:20,307 [salt.state       :1951][INFO    ][6382] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 06:55:20.307471 duration_in_ms=24.496
2019-02-18 06:55:20,309 [salt.state       :1780][INFO    ][6382] Running state [linux_repo_prereq_pkgs] at time 06:55:20.309382
2019-02-18 06:55:20,309 [salt.state       :1813][INFO    ][6382] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2019-02-18 06:55:20,320 [salt.state       :300 ][INFO    ][6382] All specified packages are already installed
2019-02-18 06:55:20,320 [salt.state       :1951][INFO    ][6382] Completed state [linux_repo_prereq_pkgs] at time 06:55:20.320423 duration_in_ms=11.041
2019-02-18 06:55:20,320 [salt.state       :1780][INFO    ][6382] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 06:55:20.320900
2019-02-18 06:55:20,321 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2019-02-18 06:55:20,321 [salt.state       :300 ][INFO    ][6382] File /etc/apt/apt.conf.d/99proxies-salt is not present
2019-02-18 06:55:20,322 [salt.state       :1951][INFO    ][6382] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 06:55:20.322100 duration_in_ms=1.2
2019-02-18 06:55:20,322 [salt.state       :1780][INFO    ][6382] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 06:55:20.322523
2019-02-18 06:55:20,322 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2019-02-18 06:55:20,323 [salt.state       :300 ][INFO    ][6382] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2019-02-18 06:55:20,323 [salt.state       :1951][INFO    ][6382] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 06:55:20.323777 duration_in_ms=1.254
2019-02-18 06:55:20,324 [salt.state       :1780][INFO    ][6382] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 06:55:20.324171
2019-02-18 06:55:20,324 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2019-02-18 06:55:20,441 [salt.state       :300 ][INFO    ][6382] File /etc/apt/preferences.d/mirantis_openstack is in the correct state
2019-02-18 06:55:20,442 [salt.state       :1951][INFO    ][6382] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 06:55:20.442212 duration_in_ms=118.041
2019-02-18 06:55:20,445 [salt.state       :1780][INFO    ][6382] Running state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 06:55:20.445491
2019-02-18 06:55:20,445 [salt.state       :1813][INFO    ][6382] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main]
2019-02-18 06:55:20,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-rocky/xenial/archive-rocky.key'] in directory '/root'
2019-02-18 06:55:20,839 [salt.state       :300 ][INFO    ][6382] Configured package repo 'deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main'
2019-02-18 06:55:20,840 [salt.state       :1951][INFO    ][6382] Completed state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 06:55:20.840103 duration_in_ms=394.608
2019-02-18 06:55:20,840 [salt.state       :1780][INFO    ][6382] Running state [pkg.refresh_db] at time 06:55:20.840779
2019-02-18 06:55:20,841 [salt.state       :1813][INFO    ][6382] Executing state module.run for [pkg.refresh_db]
2019-02-18 06:55:20,842 [salt.utils.decorators:613 ][WARNING ][6382] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-18 06:55:20,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 06:55:23,818 [salt.minion      :1308][INFO    ][3040] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218065523809915
2019-02-18 06:55:23,836 [salt.minion      :1432][INFO    ][6886] Starting a new job with PID 6886
2019-02-18 06:55:23,852 [salt.minion      :1711][INFO    ][6886] Returning information for job: 20190218065523809915
2019-02-18 06:55:24,181 [salt.state       :300 ][INFO    ][6382] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial InRelease': None, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None}}
2019-02-18 06:55:24,182 [salt.state       :1951][INFO    ][6382] Completed state [pkg.refresh_db] at time 06:55:24.182652 duration_in_ms=3341.872
2019-02-18 06:55:24,183 [salt.state       :1780][INFO    ][6382] Running state [linux_extra_packages_removed] at time 06:55:24.183254
2019-02-18 06:55:24,183 [salt.state       :1813][INFO    ][6382] Executing state pkg.removed for [linux_extra_packages_removed]
2019-02-18 06:55:24,202 [salt.state       :300 ][INFO    ][6382] All specified packages are already absent
2019-02-18 06:55:24,202 [salt.state       :1951][INFO    ][6382] Completed state [linux_extra_packages_removed] at time 06:55:24.202936 duration_in_ms=19.681
2019-02-18 06:55:24,203 [salt.state       :1780][INFO    ][6382] Running state [linux_extra_packages_latest] at time 06:55:24.203371
2019-02-18 06:55:24,203 [salt.state       :1813][INFO    ][6382] Executing state pkg.latest for [linux_extra_packages_latest]
2019-02-18 06:55:24,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2019-02-18 06:55:24,259 [salt.state       :300 ][INFO    ][6382] Package python-tornado is already up-to-date
2019-02-18 06:55:24,260 [salt.state       :1951][INFO    ][6382] Completed state [linux_extra_packages_latest] at time 06:55:24.259959 duration_in_ms=56.586
2019-02-18 06:55:24,260 [salt.state       :1780][INFO    ][6382] Running state [UTC] at time 06:55:24.260509
2019-02-18 06:55:24,261 [salt.state       :1813][INFO    ][6382] Executing state timezone.system for [UTC]
2019-02-18 06:55:24,262 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['timedatectl'] in directory '/root'
2019-02-18 06:55:24,287 [salt.state       :300 ][INFO    ][6382] Timezone UTC already set, UTC already set to UTC
2019-02-18 06:55:24,287 [salt.state       :1951][INFO    ][6382] Completed state [UTC] at time 06:55:24.287848 duration_in_ms=27.338
2019-02-18 06:55:24,288 [salt.state       :1780][INFO    ][6382] Running state [/etc/default/grub.d] at time 06:55:24.288417
2019-02-18 06:55:24,288 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/default/grub.d]
2019-02-18 06:55:24,290 [salt.state       :300 ][INFO    ][6382] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2019-02-18 06:55:24,290 [salt.state       :1951][INFO    ][6382] Completed state [/etc/default/grub.d] at time 06:55:24.290717 duration_in_ms=2.3
2019-02-18 06:55:24,291 [salt.state       :1780][INFO    ][6382] Running state [update-grub] at time 06:55:24.291123
2019-02-18 06:55:24,291 [salt.state       :1813][INFO    ][6382] Executing state cmd.wait for [update-grub]
2019-02-18 06:55:24,291 [salt.state       :300 ][INFO    ][6382] No changes made for update-grub
2019-02-18 06:55:24,292 [salt.state       :1951][INFO    ][6382] Completed state [update-grub] at time 06:55:24.292319 duration_in_ms=1.195
2019-02-18 06:55:24,294 [salt.state       :1780][INFO    ][6382] Running state [/boot/grub/grub.cfg] at time 06:55:24.294550
2019-02-18 06:55:24,295 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/boot/grub/grub.cfg]
2019-02-18 06:55:24,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2019-02-18 06:55:24,310 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:24,311 [salt.state       :300 ][INFO    ][6382] File /boot/grub/grub.cfg exists with proper permissions. No changes made.
2019-02-18 06:55:24,312 [salt.state       :1951][INFO    ][6382] Completed state [/boot/grub/grub.cfg] at time 06:55:24.312162 duration_in_ms=17.612
2019-02-18 06:55:24,312 [salt.state       :1780][INFO    ][6382] Running state [nf_conntrack] at time 06:55:24.312699
2019-02-18 06:55:24,313 [salt.state       :1813][INFO    ][6382] Executing state kmod.present for [nf_conntrack]
2019-02-18 06:55:24,313 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'lsmod' in directory '/root'
2019-02-18 06:55:24,325 [salt.state       :300 ][INFO    ][6382] Kernel module nf_conntrack is already present
2019-02-18 06:55:24,325 [salt.state       :1951][INFO    ][6382] Completed state [nf_conntrack] at time 06:55:24.325906 duration_in_ms=13.207
2019-02-18 06:55:24,326 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d] at time 06:55:24.326404
2019-02-18 06:55:24,326 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/modprobe.d]
2019-02-18 06:55:24,328 [salt.state       :300 ][INFO    ][6382] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2019-02-18 06:55:24,328 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d] at time 06:55:24.328589 duration_in_ms=2.184
2019-02-18 06:55:24,330 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/hfsplus.conf] at time 06:55:24.330690
2019-02-18 06:55:24,331 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2019-02-18 06:55:24,458 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/hfsplus.conf is in the correct state
2019-02-18 06:55:24,458 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/hfsplus.conf] at time 06:55:24.458650 duration_in_ms=127.959
2019-02-18 06:55:24,460 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/rds.conf] at time 06:55:24.460062
2019-02-18 06:55:24,460 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2019-02-18 06:55:24,583 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/rds.conf is in the correct state
2019-02-18 06:55:24,583 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/rds.conf] at time 06:55:24.583808 duration_in_ms=123.746
2019-02-18 06:55:24,585 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/cramfs.conf] at time 06:55:24.585270
2019-02-18 06:55:24,585 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2019-02-18 06:55:24,704 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/cramfs.conf is in the correct state
2019-02-18 06:55:24,704 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/cramfs.conf] at time 06:55:24.704452 duration_in_ms=119.182
2019-02-18 06:55:24,705 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/freevxfs.conf] at time 06:55:24.705815
2019-02-18 06:55:24,706 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2019-02-18 06:55:24,824 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/freevxfs.conf is in the correct state
2019-02-18 06:55:24,824 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/freevxfs.conf] at time 06:55:24.824832 duration_in_ms=119.017
2019-02-18 06:55:24,826 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/hfs.conf] at time 06:55:24.826367
2019-02-18 06:55:24,826 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2019-02-18 06:55:24,948 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/hfs.conf is in the correct state
2019-02-18 06:55:24,949 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/hfs.conf] at time 06:55:24.949145 duration_in_ms=122.777
2019-02-18 06:55:24,950 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/squashfs.conf] at time 06:55:24.950752
2019-02-18 06:55:24,951 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2019-02-18 06:55:25,079 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/squashfs.conf is in the correct state
2019-02-18 06:55:25,080 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/squashfs.conf] at time 06:55:25.079953 duration_in_ms=129.201
2019-02-18 06:55:25,081 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/udf.conf] at time 06:55:25.081504
2019-02-18 06:55:25,081 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2019-02-18 06:55:25,214 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/udf.conf is in the correct state
2019-02-18 06:55:25,215 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/udf.conf] at time 06:55:25.215333 duration_in_ms=133.828
2019-02-18 06:55:25,216 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/vfat.conf] at time 06:55:25.216900
2019-02-18 06:55:25,217 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2019-02-18 06:55:25,345 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/vfat.conf is in the correct state
2019-02-18 06:55:25,346 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/vfat.conf] at time 06:55:25.346232 duration_in_ms=129.332
2019-02-18 06:55:25,347 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/sctp.conf] at time 06:55:25.347713
2019-02-18 06:55:25,348 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2019-02-18 06:55:25,476 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/sctp.conf is in the correct state
2019-02-18 06:55:25,476 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/sctp.conf] at time 06:55:25.476807 duration_in_ms=129.094
2019-02-18 06:55:25,478 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/jffs2.conf] at time 06:55:25.478336
2019-02-18 06:55:25,478 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2019-02-18 06:55:25,655 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/jffs2.conf is in the correct state
2019-02-18 06:55:25,656 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/jffs2.conf] at time 06:55:25.656105 duration_in_ms=177.769
2019-02-18 06:55:25,657 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/tipc.conf] at time 06:55:25.657619
2019-02-18 06:55:25,658 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2019-02-18 06:55:25,786 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/tipc.conf is in the correct state
2019-02-18 06:55:25,786 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/tipc.conf] at time 06:55:25.786641 duration_in_ms=129.022
2019-02-18 06:55:25,788 [salt.state       :1780][INFO    ][6382] Running state [/etc/modprobe.d/dccp.conf] at time 06:55:25.788081
2019-02-18 06:55:25,788 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2019-02-18 06:55:25,910 [salt.state       :300 ][INFO    ][6382] File /etc/modprobe.d/dccp.conf is in the correct state
2019-02-18 06:55:25,910 [salt.state       :1951][INFO    ][6382] Completed state [/etc/modprobe.d/dccp.conf] at time 06:55:25.910685 duration_in_ms=122.603
2019-02-18 06:55:25,911 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_congestion_control] at time 06:55:25.911157
2019-02-18 06:55:25,911 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2019-02-18 06:55:25,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_congestion_control' in directory '/root'
2019-02-18 06:55:25,924 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_congestion_control = yeah is already set
2019-02-18 06:55:25,925 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_congestion_control] at time 06:55:25.925099 duration_in_ms=13.942
2019-02-18 06:55:25,925 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_slow_start_after_idle] at time 06:55:25.925700
2019-02-18 06:55:25,926 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2019-02-18 06:55:25,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_slow_start_after_idle' in directory '/root'
2019-02-18 06:55:25,938 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_slow_start_after_idle = 0 is already set
2019-02-18 06:55:25,939 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 06:55:25.938996 duration_in_ms=13.295
2019-02-18 06:55:25,939 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 06:55:25.939567
2019-02-18 06:55:25,940 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2019-02-18 06:55:25,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.icmp_echo_ignore_broadcasts' in directory '/root'
2019-02-18 06:55:25,951 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.icmp_echo_ignore_broadcasts = 1 is already set
2019-02-18 06:55:25,952 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 06:55:25.952413 duration_in_ms=12.845
2019-02-18 06:55:25,953 [salt.state       :1780][INFO    ][6382] Running state [net.nf_conntrack_max] at time 06:55:25.953095
2019-02-18 06:55:25,953 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.nf_conntrack_max]
2019-02-18 06:55:25,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.nf_conntrack_max' in directory '/root'
2019-02-18 06:55:25,965 [salt.state       :300 ][INFO    ][6382] Sysctl value net.nf_conntrack_max = 1048576 is already set
2019-02-18 06:55:25,966 [salt.state       :1951][INFO    ][6382] Completed state [net.nf_conntrack_max] at time 06:55:25.966157 duration_in_ms=13.062
2019-02-18 06:55:25,966 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 06:55:25.966751
2019-02-18 06:55:25,967 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2019-02-18 06:55:25,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.icmp_ignore_bogus_error_responses' in directory '/root'
2019-02-18 06:55:25,979 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.icmp_ignore_bogus_error_responses = 1 is already set
2019-02-18 06:55:25,979 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 06:55:25.979647 duration_in_ms=12.895
2019-02-18 06:55:25,980 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.default.log_martians] at time 06:55:25.980229
2019-02-18 06:55:25,980 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2019-02-18 06:55:25,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.default.log_martians' in directory '/root'
2019-02-18 06:55:25,992 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.default.log_martians = 1 is already set
2019-02-18 06:55:25,993 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.default.log_martians] at time 06:55:25.992982 duration_in_ms=12.752
2019-02-18 06:55:25,993 [salt.state       :1780][INFO    ][6382] Running state [net.core.somaxconn] at time 06:55:25.993592
2019-02-18 06:55:25,994 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.core.somaxconn]
2019-02-18 06:55:25,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.core.somaxconn' in directory '/root'
2019-02-18 06:55:26,005 [salt.state       :300 ][INFO    ][6382] Sysctl value net.core.somaxconn = 4096 is already set
2019-02-18 06:55:26,006 [salt.state       :1951][INFO    ][6382] Completed state [net.core.somaxconn] at time 06:55:26.006202 duration_in_ms=12.61
2019-02-18 06:55:26,006 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.all.send_redirects] at time 06:55:26.006781
2019-02-18 06:55:26,007 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2019-02-18 06:55:26,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.all.send_redirects' in directory '/root'
2019-02-18 06:55:26,018 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.all.send_redirects = 0 is already set
2019-02-18 06:55:26,019 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.all.send_redirects] at time 06:55:26.019464 duration_in_ms=12.683
2019-02-18 06:55:26,020 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_tw_reuse] at time 06:55:26.020054
2019-02-18 06:55:26,020 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2019-02-18 06:55:26,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_tw_reuse' in directory '/root'
2019-02-18 06:55:26,032 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_tw_reuse = 1 is already set
2019-02-18 06:55:26,033 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_tw_reuse] at time 06:55:26.033186 duration_in_ms=13.132
2019-02-18 06:55:26,033 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.default.rp_filter] at time 06:55:26.033799
2019-02-18 06:55:26,034 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2019-02-18 06:55:26,035 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.default.rp_filter' in directory '/root'
2019-02-18 06:55:26,046 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.default.rp_filter = 1 is already set
2019-02-18 06:55:26,047 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.default.rp_filter] at time 06:55:26.047036 duration_in_ms=13.237
2019-02-18 06:55:26,047 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_fin_timeout] at time 06:55:26.047645
2019-02-18 06:55:26,048 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2019-02-18 06:55:26,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_fin_timeout' in directory '/root'
2019-02-18 06:55:26,060 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_fin_timeout = 30 is already set
2019-02-18 06:55:26,060 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_fin_timeout] at time 06:55:26.060731 duration_in_ms=13.086
2019-02-18 06:55:26,061 [salt.state       :1780][INFO    ][6382] Running state [kernel.panic] at time 06:55:26.061302
2019-02-18 06:55:26,061 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [kernel.panic]
2019-02-18 06:55:26,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n kernel.panic' in directory '/root'
2019-02-18 06:55:26,074 [salt.state       :300 ][INFO    ][6382] Sysctl value kernel.panic = 60 is already set
2019-02-18 06:55:26,074 [salt.state       :1951][INFO    ][6382] Completed state [kernel.panic] at time 06:55:26.074690 duration_in_ms=13.387
2019-02-18 06:55:26,075 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_keepalive_probes] at time 06:55:26.075268
2019-02-18 06:55:26,075 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2019-02-18 06:55:26,076 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_keepalive_probes' in directory '/root'
2019-02-18 06:55:26,088 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_keepalive_probes = 8 is already set
2019-02-18 06:55:26,088 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_keepalive_probes] at time 06:55:26.088836 duration_in_ms=13.568
2019-02-18 06:55:26,089 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.all.log_martians] at time 06:55:26.089448
2019-02-18 06:55:26,090 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2019-02-18 06:55:26,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.all.log_martians' in directory '/root'
2019-02-18 06:55:26,102 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.all.log_martians = 1 is already set
2019-02-18 06:55:26,103 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.all.log_martians] at time 06:55:26.103290 duration_in_ms=13.842
2019-02-18 06:55:26,103 [salt.state       :1780][INFO    ][6382] Running state [fs.suid_dumpable] at time 06:55:26.103897
2019-02-18 06:55:26,104 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [fs.suid_dumpable]
2019-02-18 06:55:26,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n fs.suid_dumpable' in directory '/root'
2019-02-18 06:55:26,116 [salt.state       :300 ][INFO    ][6382] Sysctl value fs.suid_dumpable = 0 is already set
2019-02-18 06:55:26,117 [salt.state       :1951][INFO    ][6382] Completed state [fs.suid_dumpable] at time 06:55:26.117319 duration_in_ms=13.422
2019-02-18 06:55:26,117 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.default.accept_redirects] at time 06:55:26.117921
2019-02-18 06:55:26,118 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2019-02-18 06:55:26,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.default.accept_redirects' in directory '/root'
2019-02-18 06:55:26,130 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.default.accept_redirects = 0 is already set
2019-02-18 06:55:26,131 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.default.accept_redirects] at time 06:55:26.131173 duration_in_ms=13.252
2019-02-18 06:55:26,131 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.default.secure_redirects] at time 06:55:26.131759
2019-02-18 06:55:26,132 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2019-02-18 06:55:26,133 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.default.secure_redirects' in directory '/root'
2019-02-18 06:55:26,144 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.default.secure_redirects = 0 is already set
2019-02-18 06:55:26,144 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.default.secure_redirects] at time 06:55:26.144845 duration_in_ms=13.086
2019-02-18 06:55:26,145 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.default.accept_source_route] at time 06:55:26.145433
2019-02-18 06:55:26,145 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2019-02-18 06:55:26,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.default.accept_source_route' in directory '/root'
2019-02-18 06:55:26,157 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.default.accept_source_route = 0 is already set
2019-02-18 06:55:26,158 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.default.accept_source_route] at time 06:55:26.158410 duration_in_ms=12.977
2019-02-18 06:55:26,159 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_keepalive_intvl] at time 06:55:26.159026
2019-02-18 06:55:26,159 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2019-02-18 06:55:26,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_keepalive_intvl' in directory '/root'
2019-02-18 06:55:26,171 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_keepalive_intvl = 3 is already set
2019-02-18 06:55:26,171 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_keepalive_intvl] at time 06:55:26.171893 duration_in_ms=12.867
2019-02-18 06:55:26,172 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_keepalive_time] at time 06:55:26.172474
2019-02-18 06:55:26,172 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2019-02-18 06:55:26,174 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_keepalive_time' in directory '/root'
2019-02-18 06:55:26,184 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_keepalive_time = 30 is already set
2019-02-18 06:55:26,185 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_keepalive_time] at time 06:55:26.185407 duration_in_ms=12.933
2019-02-18 06:55:26,186 [salt.state       :1780][INFO    ][6382] Running state [kernel.randomize_va_space] at time 06:55:26.186036
2019-02-18 06:55:26,186 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [kernel.randomize_va_space]
2019-02-18 06:55:26,187 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n kernel.randomize_va_space' in directory '/root'
2019-02-18 06:55:26,199 [salt.state       :300 ][INFO    ][6382] Sysctl value kernel.randomize_va_space = 2 is already set
2019-02-18 06:55:26,199 [salt.state       :1951][INFO    ][6382] Completed state [kernel.randomize_va_space] at time 06:55:26.199839 duration_in_ms=13.803
2019-02-18 06:55:26,200 [salt.state       :1780][INFO    ][6382] Running state [fs.file-max] at time 06:55:26.200410
2019-02-18 06:55:26,200 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [fs.file-max]
2019-02-18 06:55:26,202 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n fs.file-max' in directory '/root'
2019-02-18 06:55:26,213 [salt.state       :300 ][INFO    ][6382] Sysctl value fs.file-max = 124165 is already set
2019-02-18 06:55:26,214 [salt.state       :1951][INFO    ][6382] Completed state [fs.file-max] at time 06:55:26.214191 duration_in_ms=13.781
2019-02-18 06:55:26,214 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_syncookies] at time 06:55:26.214799
2019-02-18 06:55:26,215 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2019-02-18 06:55:26,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_syncookies' in directory '/root'
2019-02-18 06:55:26,227 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_syncookies = 1 is already set
2019-02-18 06:55:26,228 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_syncookies] at time 06:55:26.228560 duration_in_ms=13.761
2019-02-18 06:55:26,229 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_max_syn_backlog] at time 06:55:26.229153
2019-02-18 06:55:26,229 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2019-02-18 06:55:26,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_max_syn_backlog' in directory '/root'
2019-02-18 06:55:26,241 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_max_syn_backlog = 8192 is already set
2019-02-18 06:55:26,242 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_max_syn_backlog] at time 06:55:26.242512 duration_in_ms=13.359
2019-02-18 06:55:26,243 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.all.rp_filter] at time 06:55:26.243099
2019-02-18 06:55:26,243 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2019-02-18 06:55:26,244 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.all.rp_filter' in directory '/root'
2019-02-18 06:55:26,255 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.all.rp_filter = 1 is already set
2019-02-18 06:55:26,256 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.all.rp_filter] at time 06:55:26.256218 duration_in_ms=13.119
2019-02-18 06:55:26,256 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.all.accept_source_route] at time 06:55:26.256809
2019-02-18 06:55:26,257 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2019-02-18 06:55:26,258 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.all.accept_source_route' in directory '/root'
2019-02-18 06:55:26,269 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.all.accept_source_route = 0 is already set
2019-02-18 06:55:26,270 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.all.accept_source_route] at time 06:55:26.270045 duration_in_ms=13.236
2019-02-18 06:55:26,270 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.tcp_retries2] at time 06:55:26.270660
2019-02-18 06:55:26,271 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2019-02-18 06:55:26,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.tcp_retries2' in directory '/root'
2019-02-18 06:55:26,283 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.tcp_retries2 = 5 is already set
2019-02-18 06:55:26,283 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.tcp_retries2] at time 06:55:26.283766 duration_in_ms=13.105
2019-02-18 06:55:26,284 [salt.state       :1780][INFO    ][6382] Running state [net.core.netdev_max_backlog] at time 06:55:26.284347
2019-02-18 06:55:26,284 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.core.netdev_max_backlog]
2019-02-18 06:55:26,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.core.netdev_max_backlog' in directory '/root'
2019-02-18 06:55:26,296 [salt.state       :300 ][INFO    ][6382] Sysctl value net.core.netdev_max_backlog = 261144 is already set
2019-02-18 06:55:26,297 [salt.state       :1951][INFO    ][6382] Completed state [net.core.netdev_max_backlog] at time 06:55:26.297282 duration_in_ms=12.935
2019-02-18 06:55:26,297 [salt.state       :1780][INFO    ][6382] Running state [vm.swappiness] at time 06:55:26.297852
2019-02-18 06:55:26,298 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [vm.swappiness]
2019-02-18 06:55:26,299 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n vm.swappiness' in directory '/root'
2019-02-18 06:55:26,310 [salt.state       :300 ][INFO    ][6382] Sysctl value vm.swappiness = 10 is already set
2019-02-18 06:55:26,311 [salt.state       :1951][INFO    ][6382] Completed state [vm.swappiness] at time 06:55:26.311192 duration_in_ms=13.34
2019-02-18 06:55:26,311 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.all.secure_redirects] at time 06:55:26.311740
2019-02-18 06:55:26,312 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2019-02-18 06:55:26,313 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.all.secure_redirects' in directory '/root'
2019-02-18 06:55:26,324 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.all.secure_redirects = 0 is already set
2019-02-18 06:55:26,325 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.all.secure_redirects] at time 06:55:26.325425 duration_in_ms=13.685
2019-02-18 06:55:26,326 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.neigh.default.gc_thresh1] at time 06:55:26.326069
2019-02-18 06:55:26,326 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2019-02-18 06:55:26,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh1' in directory '/root'
2019-02-18 06:55:26,339 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.neigh.default.gc_thresh1 = 4096 is already set
2019-02-18 06:55:26,339 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 06:55:26.339687 duration_in_ms=13.617
2019-02-18 06:55:26,340 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.neigh.default.gc_thresh2] at time 06:55:26.340272
2019-02-18 06:55:26,340 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2019-02-18 06:55:26,341 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh2' in directory '/root'
2019-02-18 06:55:26,352 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.neigh.default.gc_thresh2 = 8192 is already set
2019-02-18 06:55:26,353 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 06:55:26.353554 duration_in_ms=13.281
2019-02-18 06:55:26,354 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.neigh.default.gc_thresh3] at time 06:55:26.354118
2019-02-18 06:55:26,354 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2019-02-18 06:55:26,355 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh3' in directory '/root'
2019-02-18 06:55:26,366 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.neigh.default.gc_thresh3 = 16384 is already set
2019-02-18 06:55:26,367 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 06:55:26.367499 duration_in_ms=13.381
2019-02-18 06:55:26,368 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.default.send_redirects] at time 06:55:26.368072
2019-02-18 06:55:26,368 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2019-02-18 06:55:26,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.default.send_redirects' in directory '/root'
2019-02-18 06:55:26,380 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.default.send_redirects = 0 is already set
2019-02-18 06:55:26,381 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.default.send_redirects] at time 06:55:26.381024 duration_in_ms=12.952
2019-02-18 06:55:26,381 [salt.state       :1780][INFO    ][6382] Running state [net.ipv4.conf.all.accept_redirects] at time 06:55:26.381591
2019-02-18 06:55:26,382 [salt.state       :1813][INFO    ][6382] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2019-02-18 06:55:26,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'sysctl -n net.ipv4.conf.all.accept_redirects' in directory '/root'
2019-02-18 06:55:26,393 [salt.state       :300 ][INFO    ][6382] Sysctl value net.ipv4.conf.all.accept_redirects = 0 is already set
2019-02-18 06:55:26,394 [salt.state       :1951][INFO    ][6382] Completed state [net.ipv4.conf.all.accept_redirects] at time 06:55:26.394433 duration_in_ms=12.841
2019-02-18 06:55:26,395 [salt.state       :1780][INFO    ][6382] Running state [linux_sysfs_package] at time 06:55:26.395066
2019-02-18 06:55:26,395 [salt.state       :1813][INFO    ][6382] Executing state pkg.installed for [linux_sysfs_package]
2019-02-18 06:55:26,405 [salt.state       :300 ][INFO    ][6382] All specified packages are already installed
2019-02-18 06:55:26,406 [salt.state       :1951][INFO    ][6382] Completed state [linux_sysfs_package] at time 06:55:26.406272 duration_in_ms=11.207
2019-02-18 06:55:26,408 [salt.state       :1780][INFO    ][6382] Running state [/etc/sysfs.d] at time 06:55:26.408760
2019-02-18 06:55:26,409 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/etc/sysfs.d]
2019-02-18 06:55:26,410 [salt.state       :300 ][INFO    ][6382] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2019-02-18 06:55:26,410 [salt.state       :1951][INFO    ][6382] Completed state [/etc/sysfs.d] at time 06:55:26.410602 duration_in_ms=1.842
2019-02-18 06:55:26,412 [salt.state       :1780][INFO    ][6382] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 06:55:26.412189
2019-02-18 06:55:26,412 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2019-02-18 06:55:26,438 [salt.state       :300 ][INFO    ][6382] File /etc/sysfs.d/transparent_hugepages.conf is in the correct state
2019-02-18 06:55:26,439 [salt.state       :1951][INFO    ][6382] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 06:55:26.439314 duration_in_ms=27.125
2019-02-18 06:55:26,439 [salt.state       :1780][INFO    ][6382] Running state [sysfs.write] at time 06:55:26.439782
2019-02-18 06:55:26,440 [salt.state       :1813][INFO    ][6382] Executing state module.run for [sysfs.write]
2019-02-18 06:55:26,440 [salt.utils.decorators:613 ][WARNING ][6382] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-18 06:55:26,441 [salt.state       :300 ][INFO    ][6382] {'ret': True}
2019-02-18 06:55:26,441 [salt.state       :1951][INFO    ][6382] Completed state [sysfs.write] at time 06:55:26.441874 duration_in_ms=2.092
2019-02-18 06:55:26,442 [salt.state       :1780][INFO    ][6382] Running state [ondemand] at time 06:55:26.442348
2019-02-18 06:55:26,442 [salt.state       :1813][INFO    ][6382] Executing state service.dead for [ondemand]
2019-02-18 06:55:26,443 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2019-02-18 06:55:26,459 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-02-18 06:55:26,473 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-02-18 06:55:26,492 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'runlevel' in directory '/root'
2019-02-18 06:55:26,505 [salt.state       :300 ][INFO    ][6382] The service ondemand is already dead
2019-02-18 06:55:26,505 [salt.state       :1951][INFO    ][6382] Completed state [ondemand] at time 06:55:26.505744 duration_in_ms=63.396
2019-02-18 06:55:26,506 [salt.state       :1780][INFO    ][6382] Running state [en_US.UTF-8] at time 06:55:26.506336
2019-02-18 06:55:26,506 [salt.state       :1813][INFO    ][6382] Executing state locale.present for [en_US.UTF-8]
2019-02-18 06:55:26,507 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'locale -a' in directory '/root'
2019-02-18 06:55:26,518 [salt.state       :300 ][INFO    ][6382] Locale en_US.UTF-8 is already present
2019-02-18 06:55:26,519 [salt.state       :1951][INFO    ][6382] Completed state [en_US.UTF-8] at time 06:55:26.519025 duration_in_ms=12.688
2019-02-18 06:55:26,521 [salt.state       :1780][INFO    ][6382] Running state [en_US.UTF-8] at time 06:55:26.521669
2019-02-18 06:55:26,522 [salt.state       :1813][INFO    ][6382] Executing state locale.system for [en_US.UTF-8]
2019-02-18 06:55:26,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'localectl' in directory '/root'
2019-02-18 06:55:26,547 [salt.state       :300 ][INFO    ][6382] System locale en_US.UTF-8 already set
2019-02-18 06:55:26,548 [salt.state       :1951][INFO    ][6382] Completed state [en_US.UTF-8] at time 06:55:26.548103 duration_in_ms=26.434
2019-02-18 06:55:26,548 [salt.state       :1780][INFO    ][6382] Running state [root] at time 06:55:26.548513
2019-02-18 06:55:26,548 [salt.state       :1813][INFO    ][6382] Executing state group.present for [root]
2019-02-18 06:55:26,549 [salt.state       :300 ][INFO    ][6382] Group root is present and up to date
2019-02-18 06:55:26,549 [salt.state       :1951][INFO    ][6382] Completed state [root] at time 06:55:26.549590 duration_in_ms=1.077
2019-02-18 06:55:26,551 [salt.state       :1780][INFO    ][6382] Running state [root] at time 06:55:26.551505
2019-02-18 06:55:26,551 [salt.state       :1813][INFO    ][6382] Executing state user.present for [root]
2019-02-18 06:55:26,553 [salt.state       :300 ][INFO    ][6382] User root is present and up to date
2019-02-18 06:55:26,553 [salt.state       :1951][INFO    ][6382] Completed state [root] at time 06:55:26.553363 duration_in_ms=1.858
2019-02-18 06:55:26,554 [salt.state       :1780][INFO    ][6382] Running state [/root] at time 06:55:26.554764
2019-02-18 06:55:26,555 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/root]
2019-02-18 06:55:26,555 [salt.state       :300 ][INFO    ][6382] Directory /root is in the correct state
Directory /root updated
2019-02-18 06:55:26,556 [salt.state       :1951][INFO    ][6382] Completed state [/root] at time 06:55:26.556037 duration_in_ms=1.273
2019-02-18 06:55:26,556 [salt.state       :1780][INFO    ][6382] Running state [/etc/sudoers.d/90-salt-user-root] at time 06:55:26.556239
2019-02-18 06:55:26,556 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2019-02-18 06:55:26,556 [salt.state       :300 ][INFO    ][6382] File /etc/sudoers.d/90-salt-user-root is not present
2019-02-18 06:55:26,556 [salt.state       :1951][INFO    ][6382] Completed state [/etc/sudoers.d/90-salt-user-root] at time 06:55:26.556934 duration_in_ms=0.696
2019-02-18 06:55:26,557 [salt.state       :1780][INFO    ][6382] Running state [ubuntu] at time 06:55:26.557127
2019-02-18 06:55:26,557 [salt.state       :1813][INFO    ][6382] Executing state group.present for [ubuntu]
2019-02-18 06:55:26,557 [salt.state       :300 ][INFO    ][6382] Group ubuntu is present and up to date
2019-02-18 06:55:26,557 [salt.state       :1951][INFO    ][6382] Completed state [ubuntu] at time 06:55:26.557777 duration_in_ms=0.651
2019-02-18 06:55:26,559 [salt.state       :1780][INFO    ][6382] Running state [ubuntu] at time 06:55:26.558967
2019-02-18 06:55:26,559 [salt.state       :1813][INFO    ][6382] Executing state user.present for [ubuntu]
2019-02-18 06:55:26,560 [salt.state       :300 ][INFO    ][6382] User ubuntu is present and up to date
2019-02-18 06:55:26,560 [salt.state       :1951][INFO    ][6382] Completed state [ubuntu] at time 06:55:26.560402 duration_in_ms=1.434
2019-02-18 06:55:26,561 [salt.state       :1780][INFO    ][6382] Running state [/home/ubuntu] at time 06:55:26.561763
2019-02-18 06:55:26,562 [salt.state       :1813][INFO    ][6382] Executing state file.directory for [/home/ubuntu]
2019-02-18 06:55:26,562 [salt.state       :300 ][INFO    ][6382] Directory /home/ubuntu is in the correct state
Directory /home/ubuntu updated
2019-02-18 06:55:26,563 [salt.state       :1951][INFO    ][6382] Completed state [/home/ubuntu] at time 06:55:26.562970 duration_in_ms=1.206
2019-02-18 06:55:26,564 [salt.state       :1780][INFO    ][6382] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 06:55:26.564192
2019-02-18 06:55:26,564 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2019-02-18 06:55:26,588 [salt.state       :300 ][INFO    ][6382] File /etc/sudoers.d/90-salt-user-ubuntu is in the correct state
2019-02-18 06:55:26,588 [salt.state       :1951][INFO    ][6382] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 06:55:26.588346 duration_in_ms=24.153
2019-02-18 06:55:26,588 [salt.state       :1780][INFO    ][6382] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 06:55:26.588594
2019-02-18 06:55:26,588 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2019-02-18 06:55:26,704 [salt.state       :300 ][INFO    ][6382] File /etc/security/limits.d/90-salt-cis.conf is in the correct state
2019-02-18 06:55:26,704 [salt.state       :1951][INFO    ][6382] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 06:55:26.704835 duration_in_ms=116.24
2019-02-18 06:55:26,705 [salt.state       :1780][INFO    ][6382] Running state [/etc/security/limits.d/90-salt-default.conf] at time 06:55:26.705089
2019-02-18 06:55:26,705 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2019-02-18 06:55:26,809 [salt.state       :300 ][INFO    ][6382] File /etc/security/limits.d/90-salt-default.conf is in the correct state
2019-02-18 06:55:26,810 [salt.state       :1951][INFO    ][6382] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 06:55:26.810093 duration_in_ms=105.004
2019-02-18 06:55:26,810 [salt.state       :1780][INFO    ][6382] Running state [apt-daily.timer] at time 06:55:26.810337
2019-02-18 06:55:26,810 [salt.state       :1813][INFO    ][6382] Executing state service.dead for [apt-daily.timer]
2019-02-18 06:55:26,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2019-02-18 06:55:26,827 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:55:26,839 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2019-02-18 06:55:26,856 [salt.state       :300 ][INFO    ][6382] The service apt-daily.timer is already dead
2019-02-18 06:55:26,857 [salt.state       :1951][INFO    ][6382] Completed state [apt-daily.timer] at time 06:55:26.857246 duration_in_ms=46.909
2019-02-18 06:55:26,857 [salt.state       :1780][INFO    ][6382] Running state [autofs] at time 06:55:26.857625
2019-02-18 06:55:26,857 [salt.state       :1813][INFO    ][6382] Executing state service.disabled for [autofs]
2019-02-18 06:55:26,858 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2019-02-18 06:55:26,873 [salt.state       :300 ][INFO    ][6382] The named service autofs is not available
2019-02-18 06:55:26,874 [salt.state       :1951][INFO    ][6382] Completed state [autofs] at time 06:55:26.874008 duration_in_ms=16.383
2019-02-18 06:55:26,874 [salt.state       :1780][INFO    ][6382] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 06:55:26.874401
2019-02-18 06:55:26,874 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2019-02-18 06:55:26,991 [salt.state       :300 ][INFO    ][6382] File /etc/systemd/system.conf.d/90-salt.conf is in the correct state
2019-02-18 06:55:26,991 [salt.state       :1951][INFO    ][6382] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 06:55:26.991403 duration_in_ms=117.001
2019-02-18 06:55:26,993 [salt.state       :1780][INFO    ][6382] Running state [service.systemctl_reload] at time 06:55:26.993387
2019-02-18 06:55:26,993 [salt.state       :1813][INFO    ][6382] Executing state module.wait for [service.systemctl_reload]
2019-02-18 06:55:26,993 [salt.state       :300 ][INFO    ][6382] No changes made for service.systemctl_reload
2019-02-18 06:55:26,994 [salt.state       :1951][INFO    ][6382] Completed state [service.systemctl_reload] at time 06:55:26.994129 duration_in_ms=0.741
2019-02-18 06:55:26,994 [salt.state       :1780][INFO    ][6382] Running state [/etc/shadow] at time 06:55:26.994348
2019-02-18 06:55:26,994 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/shadow]
2019-02-18 06:55:26,994 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:26,995 [salt.state       :300 ][INFO    ][6382] File /etc/shadow exists with proper permissions. No changes made.
2019-02-18 06:55:26,995 [salt.state       :1951][INFO    ][6382] Completed state [/etc/shadow] at time 06:55:26.995734 duration_in_ms=1.385
2019-02-18 06:55:26,995 [salt.state       :1780][INFO    ][6382] Running state [/etc/gshadow] at time 06:55:26.995930
2019-02-18 06:55:26,996 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/gshadow]
2019-02-18 06:55:26,996 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:26,997 [salt.state       :300 ][INFO    ][6382] File /etc/gshadow exists with proper permissions. No changes made.
2019-02-18 06:55:26,997 [salt.state       :1951][INFO    ][6382] Completed state [/etc/gshadow] at time 06:55:26.997238 duration_in_ms=1.308
2019-02-18 06:55:26,997 [salt.state       :1780][INFO    ][6382] Running state [/etc/group-] at time 06:55:26.997438
2019-02-18 06:55:26,997 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/group-]
2019-02-18 06:55:26,997 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:26,998 [salt.state       :300 ][INFO    ][6382] File /etc/group- exists with proper permissions. No changes made.
2019-02-18 06:55:26,998 [salt.state       :1951][INFO    ][6382] Completed state [/etc/group-] at time 06:55:26.998643 duration_in_ms=1.205
2019-02-18 06:55:26,998 [salt.state       :1780][INFO    ][6382] Running state [/etc/shadow-] at time 06:55:26.998860
2019-02-18 06:55:26,999 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/shadow-]
2019-02-18 06:55:26,999 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:26,999 [salt.state       :300 ][INFO    ][6382] File /etc/shadow- exists with proper permissions. No changes made.
2019-02-18 06:55:27,000 [salt.state       :1951][INFO    ][6382] Completed state [/etc/shadow-] at time 06:55:27.000012 duration_in_ms=1.152
2019-02-18 06:55:27,000 [salt.state       :1780][INFO    ][6382] Running state [/etc/passwd-] at time 06:55:27.000198
2019-02-18 06:55:27,000 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/passwd-]
2019-02-18 06:55:27,000 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:27,001 [salt.state       :300 ][INFO    ][6382] File /etc/passwd- exists with proper permissions. No changes made.
2019-02-18 06:55:27,001 [salt.state       :1951][INFO    ][6382] Completed state [/etc/passwd-] at time 06:55:27.001445 duration_in_ms=1.247
2019-02-18 06:55:27,001 [salt.state       :1780][INFO    ][6382] Running state [/etc/passwd] at time 06:55:27.001638
2019-02-18 06:55:27,001 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/passwd]
2019-02-18 06:55:27,002 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:27,002 [salt.state       :300 ][INFO    ][6382] File /etc/passwd exists with proper permissions. No changes made.
2019-02-18 06:55:27,002 [salt.state       :1951][INFO    ][6382] Completed state [/etc/passwd] at time 06:55:27.002872 duration_in_ms=1.234
2019-02-18 06:55:27,003 [salt.state       :1780][INFO    ][6382] Running state [/etc/gshadow-] at time 06:55:27.003070
2019-02-18 06:55:27,003 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/gshadow-]
2019-02-18 06:55:27,003 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:27,004 [salt.state       :300 ][INFO    ][6382] File /etc/gshadow- exists with proper permissions. No changes made.
2019-02-18 06:55:27,004 [salt.state       :1951][INFO    ][6382] Completed state [/etc/gshadow-] at time 06:55:27.004248 duration_in_ms=1.177
2019-02-18 06:55:27,004 [salt.state       :1780][INFO    ][6382] Running state [/etc/group] at time 06:55:27.004474
2019-02-18 06:55:27,004 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/group]
2019-02-18 06:55:27,004 [salt.loaded.int.states.file:2298][WARNING ][6382] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-18 06:55:27,005 [salt.state       :300 ][INFO    ][6382] File /etc/group exists with proper permissions. No changes made.
2019-02-18 06:55:27,005 [salt.state       :1951][INFO    ][6382] Completed state [/etc/group] at time 06:55:27.005714 duration_in_ms=1.241
2019-02-18 06:55:27,005 [salt.state       :1780][INFO    ][6382] Running state [/etc/issue] at time 06:55:27.005944
2019-02-18 06:55:27,006 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/issue]
2019-02-18 06:55:27,007 [salt.state       :300 ][INFO    ][6382] File /etc/issue is in the correct state
2019-02-18 06:55:27,007 [salt.state       :1951][INFO    ][6382] Completed state [/etc/issue] at time 06:55:27.007808 duration_in_ms=1.864
2019-02-18 06:55:27,008 [salt.state       :1780][INFO    ][6382] Running state [/etc/hostname] at time 06:55:27.008019
2019-02-18 06:55:27,008 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/hostname]
2019-02-18 06:55:27,028 [salt.state       :300 ][INFO    ][6382] File /etc/hostname is in the correct state
2019-02-18 06:55:27,029 [salt.state       :1951][INFO    ][6382] Completed state [/etc/hostname] at time 06:55:27.029098 duration_in_ms=21.079
2019-02-18 06:55:27,030 [salt.state       :1780][INFO    ][6382] Running state [hostname mdb01] at time 06:55:27.030396
2019-02-18 06:55:27,030 [salt.state       :1813][INFO    ][6382] Executing state cmd.run for [hostname mdb01]
2019-02-18 06:55:27,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2019-02-18 06:55:27,044 [salt.state       :300 ][INFO    ][6382] unless execution succeeded
2019-02-18 06:55:27,044 [salt.state       :1951][INFO    ][6382] Completed state [hostname mdb01] at time 06:55:27.044370 duration_in_ms=13.973
2019-02-18 06:55:27,045 [salt.state       :1780][INFO    ][6382] Running state [mdb02] at time 06:55:27.045090
2019-02-18 06:55:27,045 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb02]
2019-02-18 06:55:27,046 [salt.state       :300 ][INFO    ][6382] Host mdb02 (192.168.10.33) already present
2019-02-18 06:55:27,046 [salt.state       :1951][INFO    ][6382] Completed state [mdb02] at time 06:55:27.046697 duration_in_ms=1.606
2019-02-18 06:55:27,047 [salt.state       :1780][INFO    ][6382] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 06:55:27.047042
2019-02-18 06:55:27,047 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,047 [salt.state       :300 ][INFO    ][6382] Host mdb02.mcp-ovs-dpdk-ha.local (192.168.10.33) already present
2019-02-18 06:55:27,048 [salt.state       :1951][INFO    ][6382] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 06:55:27.047980 duration_in_ms=0.938
2019-02-18 06:55:27,048 [salt.state       :1780][INFO    ][6382] Running state [mdb03] at time 06:55:27.048295
2019-02-18 06:55:27,048 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb03]
2019-02-18 06:55:27,049 [salt.state       :300 ][INFO    ][6382] Host mdb03 (192.168.10.34) already present
2019-02-18 06:55:27,049 [salt.state       :1951][INFO    ][6382] Completed state [mdb03] at time 06:55:27.049247 duration_in_ms=0.952
2019-02-18 06:55:27,049 [salt.state       :1780][INFO    ][6382] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 06:55:27.049586
2019-02-18 06:55:27,049 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,050 [salt.state       :300 ][INFO    ][6382] Host mdb03.mcp-ovs-dpdk-ha.local (192.168.10.34) already present
2019-02-18 06:55:27,050 [salt.state       :1951][INFO    ][6382] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 06:55:27.050449 duration_in_ms=0.863
2019-02-18 06:55:27,050 [salt.state       :1780][INFO    ][6382] Running state [mdb01] at time 06:55:27.050755
2019-02-18 06:55:27,050 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb01]
2019-02-18 06:55:27,051 [salt.state       :300 ][INFO    ][6382] Host mdb01 (192.168.10.32) already present
2019-02-18 06:55:27,051 [salt.state       :1951][INFO    ][6382] Completed state [mdb01] at time 06:55:27.051576 duration_in_ms=0.821
2019-02-18 06:55:27,051 [salt.state       :1780][INFO    ][6382] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 06:55:27.051888
2019-02-18 06:55:27,052 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,052 [salt.state       :300 ][INFO    ][6382] Host mdb01.mcp-ovs-dpdk-ha.local (192.168.10.32) already present
2019-02-18 06:55:27,052 [salt.state       :1951][INFO    ][6382] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 06:55:27.052749 duration_in_ms=0.86
2019-02-18 06:55:27,054 [salt.state       :1780][INFO    ][6382] Running state [file.replace] at time 06:55:27.054893
2019-02-18 06:55:27,055 [salt.state       :1813][INFO    ][6382] Executing state module.run for [file.replace]
2019-02-18 06:55:27,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'grep -q "mdb01 mdb01.mcp-ovs-dpdk-ha.local" /etc/hosts' in directory '/root'
2019-02-18 06:55:27,076 [salt.utils.decorators:613 ][WARNING ][6382] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-18 06:55:27,080 [salt.state       :300 ][INFO    ][6382] {'ret': '--- \n+++ \n@@ -8,7 +8,7 @@\n ff02::3\t\tip6-allhosts\n 192.168.10.33\t\tmdb02 mdb02.mcp-ovs-dpdk-ha.local\n 192.168.10.34\t\tmdb03 mdb03.mcp-ovs-dpdk-ha.local\n-192.168.10.32\t\tmdb01 mdb01.mcp-ovs-dpdk-ha.local\n+192.168.10.32\t\tmdb01.mcp-ovs-dpdk-ha.local mdb01\n 192.168.10.31\t\tmdb mdb.mcp-ovs-dpdk-ha.local\n 192.168.10.11\t\tcfg01 cfg01.mcp-ovs-dpdk-ha.local\n 192.168.10.14\t\tprx01 prx01.mcp-ovs-dpdk-ha.local\n'}
2019-02-18 06:55:27,081 [salt.state       :1951][INFO    ][6382] Completed state [file.replace] at time 06:55:27.081036 duration_in_ms=26.143
2019-02-18 06:55:27,081 [salt.state       :1780][INFO    ][6382] Running state [mdb] at time 06:55:27.081759
2019-02-18 06:55:27,082 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb]
2019-02-18 06:55:27,082 [salt.state       :300 ][INFO    ][6382] Host mdb (192.168.10.31) already present
2019-02-18 06:55:27,082 [salt.state       :1951][INFO    ][6382] Completed state [mdb] at time 06:55:27.082935 duration_in_ms=1.176
2019-02-18 06:55:27,083 [salt.state       :1780][INFO    ][6382] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 06:55:27.083256
2019-02-18 06:55:27,083 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,083 [salt.state       :300 ][INFO    ][6382] Host mdb.mcp-ovs-dpdk-ha.local (192.168.10.31) already present
2019-02-18 06:55:27,084 [salt.state       :1951][INFO    ][6382] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 06:55:27.084166 duration_in_ms=0.909
2019-02-18 06:55:27,084 [salt.state       :1780][INFO    ][6382] Running state [cfg01] at time 06:55:27.084503
2019-02-18 06:55:27,084 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cfg01]
2019-02-18 06:55:27,085 [salt.state       :300 ][INFO    ][6382] Host cfg01 (192.168.10.11) already present
2019-02-18 06:55:27,085 [salt.state       :1951][INFO    ][6382] Completed state [cfg01] at time 06:55:27.085421 duration_in_ms=0.906
2019-02-18 06:55:27,085 [salt.state       :1780][INFO    ][6382] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:55:27.085743
2019-02-18 06:55:27,085 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,086 [salt.state       :300 ][INFO    ][6382] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2019-02-18 06:55:27,086 [salt.state       :1951][INFO    ][6382] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:55:27.086569 duration_in_ms=0.825
2019-02-18 06:55:27,086 [salt.state       :1780][INFO    ][6382] Running state [prx01] at time 06:55:27.086898
2019-02-18 06:55:27,087 [salt.state       :1813][INFO    ][6382] Executing state host.present for [prx01]
2019-02-18 06:55:27,087 [salt.state       :300 ][INFO    ][6382] Host prx01 (192.168.10.14) already present
2019-02-18 06:55:27,087 [salt.state       :1951][INFO    ][6382] Completed state [prx01] at time 06:55:27.087709 duration_in_ms=0.812
2019-02-18 06:55:27,088 [salt.state       :1780][INFO    ][6382] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 06:55:27.088072
2019-02-18 06:55:27,088 [salt.state       :1813][INFO    ][6382] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,088 [salt.state       :300 ][INFO    ][6382] Host prx01.mcp-ovs-dpdk-ha.local (192.168.10.14) already present
2019-02-18 06:55:27,088 [salt.state       :1951][INFO    ][6382] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 06:55:27.088953 duration_in_ms=0.881
2019-02-18 06:55:27,089 [salt.state       :1780][INFO    ][6382] Running state [kvm01] at time 06:55:27.089272
2019-02-18 06:55:27,089 [salt.state       :1813][INFO    ][6382] Executing state host.present for [kvm01]
2019-02-18 06:55:27,089 [salt.state       :300 ][INFO    ][6382] Host kvm01 (192.168.10.20) already present
2019-02-18 06:55:27,090 [salt.state       :1951][INFO    ][6382] Completed state [kvm01] at time 06:55:27.090120 duration_in_ms=0.848
2019-02-18 06:55:27,090 [salt.state       :1780][INFO    ][6382] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 06:55:27.090435
2019-02-18 06:55:27,090 [salt.state       :1813][INFO    ][6382] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,091 [salt.state       :300 ][INFO    ][6382] Host kvm01.mcp-ovs-dpdk-ha.local (192.168.10.20) already present
2019-02-18 06:55:27,091 [salt.state       :1951][INFO    ][6382] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 06:55:27.091349 duration_in_ms=0.914
2019-02-18 06:55:27,091 [salt.state       :1780][INFO    ][6382] Running state [kvm03] at time 06:55:27.091702
2019-02-18 06:55:27,091 [salt.state       :1813][INFO    ][6382] Executing state host.present for [kvm03]
2019-02-18 06:55:27,092 [salt.state       :300 ][INFO    ][6382] Host kvm03 (192.168.10.22) already present
2019-02-18 06:55:27,092 [salt.state       :1951][INFO    ][6382] Completed state [kvm03] at time 06:55:27.092553 duration_in_ms=0.851
2019-02-18 06:55:27,092 [salt.state       :1780][INFO    ][6382] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 06:55:27.092860
2019-02-18 06:55:27,093 [salt.state       :1813][INFO    ][6382] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,093 [salt.state       :300 ][INFO    ][6382] Host kvm03.mcp-ovs-dpdk-ha.local (192.168.10.22) already present
2019-02-18 06:55:27,093 [salt.state       :1951][INFO    ][6382] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 06:55:27.093781 duration_in_ms=0.921
2019-02-18 06:55:27,094 [salt.state       :1780][INFO    ][6382] Running state [kvm02] at time 06:55:27.094116
2019-02-18 06:55:27,094 [salt.state       :1813][INFO    ][6382] Executing state host.present for [kvm02]
2019-02-18 06:55:27,094 [salt.state       :300 ][INFO    ][6382] Host kvm02 (192.168.10.21) already present
2019-02-18 06:55:27,094 [salt.state       :1951][INFO    ][6382] Completed state [kvm02] at time 06:55:27.094940 duration_in_ms=0.823
2019-02-18 06:55:27,095 [salt.state       :1780][INFO    ][6382] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 06:55:27.095249
2019-02-18 06:55:27,095 [salt.state       :1813][INFO    ][6382] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,095 [salt.state       :300 ][INFO    ][6382] Host kvm02.mcp-ovs-dpdk-ha.local (192.168.10.21) already present
2019-02-18 06:55:27,096 [salt.state       :1951][INFO    ][6382] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 06:55:27.096105 duration_in_ms=0.857
2019-02-18 06:55:27,096 [salt.state       :1780][INFO    ][6382] Running state [dbs] at time 06:55:27.096485
2019-02-18 06:55:27,096 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs]
2019-02-18 06:55:27,097 [salt.state       :300 ][INFO    ][6382] Host dbs (192.168.10.23) already present
2019-02-18 06:55:27,097 [salt.state       :1951][INFO    ][6382] Completed state [dbs] at time 06:55:27.097353 duration_in_ms=0.868
2019-02-18 06:55:27,097 [salt.state       :1780][INFO    ][6382] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 06:55:27.097681
2019-02-18 06:55:27,097 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,098 [salt.state       :300 ][INFO    ][6382] Host dbs.mcp-ovs-dpdk-ha.local (192.168.10.23) already present
2019-02-18 06:55:27,098 [salt.state       :1951][INFO    ][6382] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 06:55:27.098525 duration_in_ms=0.844
2019-02-18 06:55:27,098 [salt.state       :1780][INFO    ][6382] Running state [prx] at time 06:55:27.098846
2019-02-18 06:55:27,099 [salt.state       :1813][INFO    ][6382] Executing state host.present for [prx]
2019-02-18 06:55:27,099 [salt.state       :300 ][INFO    ][6382] Host prx (192.168.10.13) already present
2019-02-18 06:55:27,099 [salt.state       :1951][INFO    ][6382] Completed state [prx] at time 06:55:27.099927 duration_in_ms=1.081
2019-02-18 06:55:27,100 [salt.state       :1780][INFO    ][6382] Running state [prx.mcp-ovs-dpdk-ha.local] at time 06:55:27.100240
2019-02-18 06:55:27,100 [salt.state       :1813][INFO    ][6382] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,100 [salt.state       :300 ][INFO    ][6382] Host prx.mcp-ovs-dpdk-ha.local (192.168.10.13) already present
2019-02-18 06:55:27,101 [salt.state       :1951][INFO    ][6382] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 06:55:27.101114 duration_in_ms=0.873
2019-02-18 06:55:27,101 [salt.state       :1780][INFO    ][6382] Running state [prx02] at time 06:55:27.101445
2019-02-18 06:55:27,101 [salt.state       :1813][INFO    ][6382] Executing state host.present for [prx02]
2019-02-18 06:55:27,102 [salt.state       :300 ][INFO    ][6382] Host prx02 (192.168.10.15) already present
2019-02-18 06:55:27,102 [salt.state       :1951][INFO    ][6382] Completed state [prx02] at time 06:55:27.102294 duration_in_ms=0.849
2019-02-18 06:55:27,102 [salt.state       :1780][INFO    ][6382] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 06:55:27.102639
2019-02-18 06:55:27,102 [salt.state       :1813][INFO    ][6382] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,103 [salt.state       :300 ][INFO    ][6382] Host prx02.mcp-ovs-dpdk-ha.local (192.168.10.15) already present
2019-02-18 06:55:27,103 [salt.state       :1951][INFO    ][6382] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 06:55:27.103532 duration_in_ms=0.893
2019-02-18 06:55:27,103 [salt.state       :1780][INFO    ][6382] Running state [msg02] at time 06:55:27.103864
2019-02-18 06:55:27,104 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg02]
2019-02-18 06:55:27,104 [salt.state       :300 ][INFO    ][6382] Host msg02 (192.168.10.29) already present
2019-02-18 06:55:27,104 [salt.state       :1951][INFO    ][6382] Completed state [msg02] at time 06:55:27.104737 duration_in_ms=0.873
2019-02-18 06:55:27,105 [salt.state       :1780][INFO    ][6382] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 06:55:27.105070
2019-02-18 06:55:27,105 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,105 [salt.state       :300 ][INFO    ][6382] Host msg02.mcp-ovs-dpdk-ha.local (192.168.10.29) already present
2019-02-18 06:55:27,105 [salt.state       :1951][INFO    ][6382] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 06:55:27.105929 duration_in_ms=0.858
2019-02-18 06:55:27,106 [salt.state       :1780][INFO    ][6382] Running state [msg03] at time 06:55:27.106263
2019-02-18 06:55:27,106 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg03]
2019-02-18 06:55:27,106 [salt.state       :300 ][INFO    ][6382] Host msg03 (192.168.10.30) already present
2019-02-18 06:55:27,107 [salt.state       :1951][INFO    ][6382] Completed state [msg03] at time 06:55:27.107126 duration_in_ms=0.863
2019-02-18 06:55:27,107 [salt.state       :1780][INFO    ][6382] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 06:55:27.107460
2019-02-18 06:55:27,107 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,108 [salt.state       :300 ][INFO    ][6382] Host msg03.mcp-ovs-dpdk-ha.local (192.168.10.30) already present
2019-02-18 06:55:27,108 [salt.state       :1951][INFO    ][6382] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 06:55:27.108301 duration_in_ms=0.841
2019-02-18 06:55:27,108 [salt.state       :1780][INFO    ][6382] Running state [msg01] at time 06:55:27.108661
2019-02-18 06:55:27,108 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg01]
2019-02-18 06:55:27,109 [salt.state       :300 ][INFO    ][6382] Host msg01 (192.168.10.28) already present
2019-02-18 06:55:27,109 [salt.state       :1951][INFO    ][6382] Completed state [msg01] at time 06:55:27.109500 duration_in_ms=0.839
2019-02-18 06:55:27,109 [salt.state       :1780][INFO    ][6382] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 06:55:27.109835
2019-02-18 06:55:27,110 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,110 [salt.state       :300 ][INFO    ][6382] Host msg01.mcp-ovs-dpdk-ha.local (192.168.10.28) already present
2019-02-18 06:55:27,110 [salt.state       :1951][INFO    ][6382] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 06:55:27.110701 duration_in_ms=0.866
2019-02-18 06:55:27,111 [salt.state       :1780][INFO    ][6382] Running state [msg] at time 06:55:27.111045
2019-02-18 06:55:27,111 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg]
2019-02-18 06:55:27,111 [salt.state       :300 ][INFO    ][6382] Host msg (192.168.10.27) already present
2019-02-18 06:55:27,111 [salt.state       :1951][INFO    ][6382] Completed state [msg] at time 06:55:27.111893 duration_in_ms=0.849
2019-02-18 06:55:27,112 [salt.state       :1780][INFO    ][6382] Running state [msg.mcp-ovs-dpdk-ha.local] at time 06:55:27.112248
2019-02-18 06:55:27,112 [salt.state       :1813][INFO    ][6382] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,112 [salt.state       :300 ][INFO    ][6382] Host msg.mcp-ovs-dpdk-ha.local (192.168.10.27) already present
2019-02-18 06:55:27,113 [salt.state       :1951][INFO    ][6382] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 06:55:27.113114 duration_in_ms=0.867
2019-02-18 06:55:27,113 [salt.state       :1780][INFO    ][6382] Running state [cfg01] at time 06:55:27.113459
2019-02-18 06:55:27,113 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cfg01]
2019-02-18 06:55:27,114 [salt.state       :300 ][INFO    ][6382] Host cfg01 (192.168.10.11) already present
2019-02-18 06:55:27,114 [salt.state       :1951][INFO    ][6382] Completed state [cfg01] at time 06:55:27.114347 duration_in_ms=0.888
2019-02-18 06:55:27,114 [salt.state       :1780][INFO    ][6382] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:55:27.114711
2019-02-18 06:55:27,114 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,115 [salt.state       :300 ][INFO    ][6382] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2019-02-18 06:55:27,115 [salt.state       :1951][INFO    ][6382] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 06:55:27.115590 duration_in_ms=0.879
2019-02-18 06:55:27,115 [salt.state       :1780][INFO    ][6382] Running state [cmp002] at time 06:55:27.115954
2019-02-18 06:55:27,116 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cmp002]
2019-02-18 06:55:27,116 [salt.state       :300 ][INFO    ][6382] Host cmp002 (192.168.10.56) already present
2019-02-18 06:55:27,116 [salt.state       :1951][INFO    ][6382] Completed state [cmp002] at time 06:55:27.116870 duration_in_ms=0.916
2019-02-18 06:55:27,117 [salt.state       :1780][INFO    ][6382] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 06:55:27.117222
2019-02-18 06:55:27,117 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,117 [salt.state       :300 ][INFO    ][6382] Host cmp002.mcp-ovs-dpdk-ha.local (192.168.10.56) already present
2019-02-18 06:55:27,118 [salt.state       :1951][INFO    ][6382] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 06:55:27.118066 duration_in_ms=0.844
2019-02-18 06:55:27,118 [salt.state       :1780][INFO    ][6382] Running state [cmp001] at time 06:55:27.118413
2019-02-18 06:55:27,118 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cmp001]
2019-02-18 06:55:27,119 [salt.state       :300 ][INFO    ][6382] Host cmp001 (192.168.10.55) already present
2019-02-18 06:55:27,119 [salt.state       :1951][INFO    ][6382] Completed state [cmp001] at time 06:55:27.119290 duration_in_ms=0.877
2019-02-18 06:55:27,119 [salt.state       :1780][INFO    ][6382] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 06:55:27.119632
2019-02-18 06:55:27,119 [salt.state       :1813][INFO    ][6382] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,120 [salt.state       :300 ][INFO    ][6382] Host cmp001.mcp-ovs-dpdk-ha.local (192.168.10.55) already present
2019-02-18 06:55:27,120 [salt.state       :1951][INFO    ][6382] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 06:55:27.120490 duration_in_ms=0.859
2019-02-18 06:55:27,120 [salt.state       :1780][INFO    ][6382] Running state [dbs01] at time 06:55:27.120836
2019-02-18 06:55:27,121 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs01]
2019-02-18 06:55:27,121 [salt.state       :300 ][INFO    ][6382] Host dbs01 (192.168.10.24) already present
2019-02-18 06:55:27,121 [salt.state       :1951][INFO    ][6382] Completed state [dbs01] at time 06:55:27.121711 duration_in_ms=0.874
2019-02-18 06:55:27,122 [salt.state       :1780][INFO    ][6382] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 06:55:27.122061
2019-02-18 06:55:27,122 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,122 [salt.state       :300 ][INFO    ][6382] Host dbs01.mcp-ovs-dpdk-ha.local (192.168.10.24) already present
2019-02-18 06:55:27,122 [salt.state       :1951][INFO    ][6382] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 06:55:27.122948 duration_in_ms=0.887
2019-02-18 06:55:27,123 [salt.state       :1780][INFO    ][6382] Running state [dbs02] at time 06:55:27.123303
2019-02-18 06:55:27,123 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs02]
2019-02-18 06:55:27,123 [salt.state       :300 ][INFO    ][6382] Host dbs02 (192.168.10.25) already present
2019-02-18 06:55:27,124 [salt.state       :1951][INFO    ][6382] Completed state [dbs02] at time 06:55:27.124141 duration_in_ms=0.838
2019-02-18 06:55:27,124 [salt.state       :1780][INFO    ][6382] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 06:55:27.124516
2019-02-18 06:55:27,124 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,125 [salt.state       :300 ][INFO    ][6382] Host dbs02.mcp-ovs-dpdk-ha.local (192.168.10.25) already present
2019-02-18 06:55:27,125 [salt.state       :1951][INFO    ][6382] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 06:55:27.125537 duration_in_ms=1.021
2019-02-18 06:55:27,125 [salt.state       :1780][INFO    ][6382] Running state [dbs03] at time 06:55:27.125914
2019-02-18 06:55:27,126 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs03]
2019-02-18 06:55:27,126 [salt.state       :300 ][INFO    ][6382] Host dbs03 (192.168.10.26) already present
2019-02-18 06:55:27,126 [salt.state       :1951][INFO    ][6382] Completed state [dbs03] at time 06:55:27.126797 duration_in_ms=0.883
2019-02-18 06:55:27,127 [salt.state       :1780][INFO    ][6382] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 06:55:27.127156
2019-02-18 06:55:27,127 [salt.state       :1813][INFO    ][6382] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,127 [salt.state       :300 ][INFO    ][6382] Host dbs03.mcp-ovs-dpdk-ha.local (192.168.10.26) already present
2019-02-18 06:55:27,127 [salt.state       :1951][INFO    ][6382] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 06:55:27.127956 duration_in_ms=0.8
2019-02-18 06:55:27,128 [salt.state       :1780][INFO    ][6382] Running state [mas01] at time 06:55:27.128312
2019-02-18 06:55:27,128 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mas01]
2019-02-18 06:55:27,129 [salt.state       :300 ][INFO    ][6382] Host mas01 (192.168.10.12) already present
2019-02-18 06:55:27,129 [salt.state       :1951][INFO    ][6382] Completed state [mas01] at time 06:55:27.129187 duration_in_ms=0.876
2019-02-18 06:55:27,129 [salt.state       :1780][INFO    ][6382] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 06:55:27.129609
2019-02-18 06:55:27,129 [salt.state       :1813][INFO    ][6382] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,130 [salt.state       :300 ][INFO    ][6382] Host mas01.mcp-ovs-dpdk-ha.local (192.168.10.12) already present
2019-02-18 06:55:27,130 [salt.state       :1951][INFO    ][6382] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 06:55:27.130496 duration_in_ms=0.888
2019-02-18 06:55:27,130 [salt.state       :1780][INFO    ][6382] Running state [ctl02] at time 06:55:27.130855
2019-02-18 06:55:27,131 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl02]
2019-02-18 06:55:27,131 [salt.state       :300 ][INFO    ][6382] Host ctl02 (192.168.10.37) already present
2019-02-18 06:55:27,131 [salt.state       :1951][INFO    ][6382] Completed state [ctl02] at time 06:55:27.131670 duration_in_ms=0.815
2019-02-18 06:55:27,132 [salt.state       :1780][INFO    ][6382] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 06:55:27.132015
2019-02-18 06:55:27,132 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,132 [salt.state       :300 ][INFO    ][6382] Host ctl02.mcp-ovs-dpdk-ha.local (192.168.10.37) already present
2019-02-18 06:55:27,132 [salt.state       :1951][INFO    ][6382] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 06:55:27.132855 duration_in_ms=0.841
2019-02-18 06:55:27,133 [salt.state       :1780][INFO    ][6382] Running state [ctl03] at time 06:55:27.133227
2019-02-18 06:55:27,133 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl03]
2019-02-18 06:55:27,133 [salt.state       :300 ][INFO    ][6382] Host ctl03 (192.168.10.38) already present
2019-02-18 06:55:27,134 [salt.state       :1951][INFO    ][6382] Completed state [ctl03] at time 06:55:27.134052 duration_in_ms=0.826
2019-02-18 06:55:27,134 [salt.state       :1780][INFO    ][6382] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 06:55:27.134412
2019-02-18 06:55:27,134 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,135 [salt.state       :300 ][INFO    ][6382] Host ctl03.mcp-ovs-dpdk-ha.local (192.168.10.38) already present
2019-02-18 06:55:27,135 [salt.state       :1951][INFO    ][6382] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 06:55:27.135236 duration_in_ms=0.824
2019-02-18 06:55:27,135 [salt.state       :1780][INFO    ][6382] Running state [ctl01] at time 06:55:27.135617
2019-02-18 06:55:27,135 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl01]
2019-02-18 06:55:27,136 [salt.state       :300 ][INFO    ][6382] Host ctl01 (192.168.10.36) already present
2019-02-18 06:55:27,136 [salt.state       :1951][INFO    ][6382] Completed state [ctl01] at time 06:55:27.136509 duration_in_ms=0.892
2019-02-18 06:55:27,136 [salt.state       :1780][INFO    ][6382] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 06:55:27.136866
2019-02-18 06:55:27,137 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,137 [salt.state       :300 ][INFO    ][6382] Host ctl01.mcp-ovs-dpdk-ha.local (192.168.10.36) already present
2019-02-18 06:55:27,137 [salt.state       :1951][INFO    ][6382] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 06:55:27.137744 duration_in_ms=0.878
2019-02-18 06:55:27,138 [salt.state       :1780][INFO    ][6382] Running state [ctl] at time 06:55:27.138088
2019-02-18 06:55:27,138 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl]
2019-02-18 06:55:27,138 [salt.state       :300 ][INFO    ][6382] Host ctl (192.168.10.35) already present
2019-02-18 06:55:27,139 [salt.state       :1951][INFO    ][6382] Completed state [ctl] at time 06:55:27.138977 duration_in_ms=0.888
2019-02-18 06:55:27,139 [salt.state       :1780][INFO    ][6382] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 06:55:27.139333
2019-02-18 06:55:27,139 [salt.state       :1813][INFO    ][6382] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2019-02-18 06:55:27,140 [salt.state       :300 ][INFO    ][6382] Host ctl.mcp-ovs-dpdk-ha.local (192.168.10.35) already present
2019-02-18 06:55:27,140 [salt.state       :1951][INFO    ][6382] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 06:55:27.140174 duration_in_ms=0.841
2019-02-18 06:55:27,140 [salt.state       :1780][INFO    ][6382] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 06:55:27.140371
2019-02-18 06:55:27,140 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2019-02-18 06:55:27,140 [salt.state       :300 ][INFO    ][6382] File /etc/network/interfaces.d/50-cloud-init.cfg is not present
2019-02-18 06:55:27,141 [salt.state       :1951][INFO    ][6382] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 06:55:27.141041 duration_in_ms=0.67
2019-02-18 06:55:27,141 [salt.state       :1780][INFO    ][6382] Running state [ens3] at time 06:55:27.141274
2019-02-18 06:55:27,141 [salt.state       :1813][INFO    ][6382] Executing state network.managed for [ens3]
2019-02-18 06:55:27,275 [salt.state       :300 ][INFO    ][6382] Interface ens3 is up to date.
2019-02-18 06:55:27,276 [salt.state       :1951][INFO    ][6382] Completed state [ens3] at time 06:55:27.276350 duration_in_ms=135.075
2019-02-18 06:55:27,276 [salt.state       :1780][INFO    ][6382] Running state [ens2] at time 06:55:27.276836
2019-02-18 06:55:27,277 [salt.state       :1813][INFO    ][6382] Executing state network.managed for [ens2]
2019-02-18 06:55:27,312 [salt.state       :300 ][INFO    ][6382] Interface ens2 is up to date.
2019-02-18 06:55:27,313 [salt.state       :1951][INFO    ][6382] Completed state [ens2] at time 06:55:27.313166 duration_in_ms=36.329
2019-02-18 06:55:27,313 [salt.state       :1780][INFO    ][6382] Running state [linux_system_network] at time 06:55:27.313600
2019-02-18 06:55:27,313 [salt.state       :1813][INFO    ][6382] Executing state network.system for [linux_system_network]
2019-02-18 06:55:27,315 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2019-02-18 06:55:27,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2019-02-18 06:55:27,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2019-02-18 06:55:27,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2019-02-18 06:55:27,743 [salt.loaded.int.module.debian_ip:1964][WARNING ][6382] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-02-18 06:55:27,744 [salt.state       :300 ][INFO    ][6382] {'network_settings': u'--- \n+++ \n@@ -1,3 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2019-02-18 06:55:27,744 [salt.state       :1951][INFO    ][6382] Completed state [linux_system_network] at time 06:55:27.744391 duration_in_ms=430.791
2019-02-18 06:55:27,744 [salt.state       :1780][INFO    ][6382] Running state [/etc/profile.d/proxy.sh] at time 06:55:27.744751
2019-02-18 06:55:27,745 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/profile.d/proxy.sh]
2019-02-18 06:55:27,745 [salt.state       :300 ][INFO    ][6382] File /etc/profile.d/proxy.sh is not present
2019-02-18 06:55:27,745 [salt.state       :1951][INFO    ][6382] Completed state [/etc/profile.d/proxy.sh] at time 06:55:27.745804 duration_in_ms=1.052
2019-02-18 06:55:27,746 [salt.state       :1780][INFO    ][6382] Running state [/etc/apt/apt.conf.d/95proxies] at time 06:55:27.746024
2019-02-18 06:55:27,746 [salt.state       :1813][INFO    ][6382] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2019-02-18 06:55:27,746 [salt.state       :300 ][INFO    ][6382] File /etc/apt/apt.conf.d/95proxies is not present
2019-02-18 06:55:27,746 [salt.state       :1951][INFO    ][6382] Completed state [/etc/apt/apt.conf.d/95proxies] at time 06:55:27.746745 duration_in_ms=0.721
2019-02-18 06:55:27,747 [salt.state       :1780][INFO    ][6382] Running state [/dev/shm] at time 06:55:27.746975
2019-02-18 06:55:27,747 [salt.state       :1813][INFO    ][6382] Executing state mount.mounted for [/dev/shm]
2019-02-18 06:55:27,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'mount -l' in directory '/root'
2019-02-18 06:55:27,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'blkid' in directory '/root'
2019-02-18 06:55:27,778 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'mount -l' in directory '/root'
2019-02-18 06:55:27,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'umount /dev/shm' in directory '/root'
2019-02-18 06:55:27,802 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][6382] Command '['umount', '/dev/shm']' failed with return code: 32
2019-02-18 06:55:27,802 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][6382] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-02-18 06:55:27,802 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][6382] retcode: 32
2019-02-18 06:55:27,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'mount -l' in directory '/root'
2019-02-18 06:55:27,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command 'blkid' in directory '/root'
2019-02-18 06:55:27,827 [salt.state       :300 ][INFO    ][6382] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2019-02-18 06:55:27,828 [salt.state       :1951][INFO    ][6382] Completed state [/dev/shm] at time 06:55:27.828221 duration_in_ms=81.246
2019-02-18 06:55:27,828 [salt.state       :1780][INFO    ][6382] Running state [ntp] at time 06:55:27.828623
2019-02-18 06:55:27,828 [salt.state       :1813][INFO    ][6382] Executing state pkg.installed for [ntp]
2019-02-18 06:55:27,838 [salt.state       :300 ][INFO    ][6382] All specified packages are already installed
2019-02-18 06:55:27,838 [salt.state       :1951][INFO    ][6382] Completed state [ntp] at time 06:55:27.838900 duration_in_ms=10.276
2019-02-18 06:55:27,841 [salt.state       :1780][INFO    ][6382] Running state [/etc/ntp.conf] at time 06:55:27.841311
2019-02-18 06:55:27,841 [salt.state       :1813][INFO    ][6382] Executing state file.managed for [/etc/ntp.conf]
2019-02-18 06:55:27,915 [salt.state       :300 ][INFO    ][6382] File /etc/ntp.conf is in the correct state
2019-02-18 06:55:27,915 [salt.state       :1951][INFO    ][6382] Completed state [/etc/ntp.conf] at time 06:55:27.915674 duration_in_ms=74.362
2019-02-18 06:55:27,917 [salt.state       :1780][INFO    ][6382] Running state [ntp] at time 06:55:27.917325
2019-02-18 06:55:27,917 [salt.state       :1813][INFO    ][6382] Executing state service.running for [ntp]
2019-02-18 06:55:27,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2019-02-18 06:55:27,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-02-18 06:55:27,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6382] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2019-02-18 06:55:27,962 [salt.state       :300 ][INFO    ][6382] The service ntp is already running
2019-02-18 06:55:27,962 [salt.state       :1951][INFO    ][6382] Completed state [ntp] at time 06:55:27.962807 duration_in_ms=45.482
2019-02-18 06:55:27,969 [salt.minion      :1711][INFO    ][6382] Returning information for job: 20190218065508764038
2019-02-18 06:55:47,780 [salt.minion      :1308][INFO    ][3040] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20190218065547776109
2019-02-18 06:55:47,798 [salt.minion      :1432][INFO    ][7125] Starting a new job with PID 7125
2019-02-18 06:55:47,815 [salt.minion      :1711][INFO    ][7125] Returning information for job: 20190218065547776109
2019-02-18 06:55:48,528 [salt.minion      :1308][INFO    ][3040] User sudo_ubuntu Executing command system.reboot with jid 20190218065548520964
2019-02-18 06:55:48,546 [salt.minion      :1432][INFO    ][7130] Starting a new job with PID 7130
2019-02-18 06:55:48,553 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7130] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2019-02-18 06:55:48,894 [salt.utils.parsers:1051][WARNING ][3040] Minion received a SIGTERM. Exiting.
2019-02-18 06:55:48,894 [salt.cli.daemons :82  ][INFO    ][3040] Shutting down the Salt Minion
2019-02-18 06:55:49,629 [salt.minion      :1711][INFO    ][7130] Returning information for job: 20190218065548520964
2019-02-18 06:56:12,528 [salt.cli.daemons :293 ][INFO    ][1557] Setting up the Salt Minion "mdb01.mcp-ovs-dpdk-ha.local"
2019-02-18 06:56:12,997 [salt.cli.daemons :82  ][INFO    ][1557] Starting up the Salt Minion
2019-02-18 06:56:12,998 [salt.utils.event :1017][INFO    ][1557] Starting pull socket on /var/run/salt/minion/minion_event_19308d998f_pull.ipc
2019-02-18 06:56:14,703 [salt.minion      :976 ][INFO    ][1557] Creating minion process manager
2019-02-18 06:56:15,856 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1557] Executing command ['date', '+%z'] in directory '/root'
2019-02-18 06:56:15,876 [salt.utils.schedule:568 ][INFO    ][1557] Updating job settings for scheduled job: __mine_interval
2019-02-18 06:56:15,878 [salt.minion      :1108][INFO    ][1557] Added mine.update to scheduler
2019-02-18 06:56:15,882 [salt.minion      :1975][INFO    ][1557] Minion is starting as user 'root'
2019-02-18 06:56:15,893 [salt.minion      :2336][INFO    ][1557] Minion is ready to receive requests!
2019-02-18 06:56:34,370 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command test.ping with jid 20190218065634358646
2019-02-18 06:56:34,380 [salt.minion      :1432][INFO    ][1685] Starting a new job with PID 1685
2019-02-18 06:56:34,412 [salt.minion      :1711][INFO    ][1685] Returning information for job: 20190218065634358646
2019-02-18 06:56:35,169 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command pkg.upgrade with jid 20190218065635157326
2019-02-18 06:56:35,179 [salt.minion      :1432][INFO    ][1690] Starting a new job with PID 1690
2019-02-18 06:56:35,834 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1690] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:56:36,369 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1690] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2019-02-18 06:56:50,238 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218065650223653
2019-02-18 06:56:50,249 [salt.minion      :1432][INFO    ][2161] Starting a new job with PID 2161
2019-02-18 06:56:50,447 [salt.minion      :1711][INFO    ][2161] Returning information for job: 20190218065650223653
2019-02-18 06:57:03,438 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1690] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:57:03,472 [salt.minion      :1711][INFO    ][1690] Returning information for job: 20190218065635157326
2019-02-18 06:57:30,417 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command test.ping with jid 20190218065730409566
2019-02-18 06:57:30,427 [salt.minion      :1432][INFO    ][3037] Starting a new job with PID 3037
2019-02-18 06:57:30,445 [salt.minion      :1711][INFO    ][3037] Returning information for job: 20190218065730409566
2019-02-18 06:59:03,454 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218065903443408
2019-02-18 06:59:03,463 [salt.minion      :1432][INFO    ][3042] Starting a new job with PID 3042
2019-02-18 06:59:04,240 [salt.state       :915 ][INFO    ][3042] Loading fresh modules for state activity
2019-02-18 06:59:04,293 [salt.fileclient  :1219][INFO    ][3042] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2019-02-18 06:59:04,320 [salt.fileclient  :1219][INFO    ][3042] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2019-02-18 06:59:05,151 [salt.state       :1780][INFO    ][3042] Running state [keepalived] at time 06:59:05.150995
2019-02-18 06:59:05,151 [salt.state       :1813][INFO    ][3042] Executing state pkg.installed for [keepalived]
2019-02-18 06:59:05,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:59:05,424 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2019-02-18 06:59:05,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 06:59:06,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 06:59:06,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2019-02-18 06:59:10,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 06:59:10,208 [salt.state       :300 ][INFO    ][3042] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.3.9-1.0.18.04.1~u16.04+mcp'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2019-02-18 06:59:10,227 [salt.state       :915 ][INFO    ][3042] Loading fresh modules for state activity
2019-02-18 06:59:10,259 [salt.state       :1951][INFO    ][3042] Completed state [keepalived] at time 06:59:10.259663 duration_in_ms=5108.669
2019-02-18 06:59:10,264 [salt.state       :1780][INFO    ][3042] Running state [lsof] at time 06:59:10.264304
2019-02-18 06:59:10,264 [salt.state       :1813][INFO    ][3042] Executing state pkg.installed for [lsof]
2019-02-18 06:59:10,822 [salt.state       :300 ][INFO    ][3042] All specified packages are already installed
2019-02-18 06:59:10,823 [salt.state       :1951][INFO    ][3042] Completed state [lsof] at time 06:59:10.823242 duration_in_ms=558.937
2019-02-18 06:59:10,826 [salt.state       :1780][INFO    ][3042] Running state [/etc/keepalived/keepalived.conf] at time 06:59:10.826943
2019-02-18 06:59:10,827 [salt.state       :1813][INFO    ][3042] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2019-02-18 06:59:10,850 [salt.fileclient  :1219][INFO    ][3042] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2019-02-18 06:59:10,891 [salt.state       :300 ][INFO    ][3042] File changed:
New file
2019-02-18 06:59:10,892 [salt.state       :1951][INFO    ][3042] Completed state [/etc/keepalived/keepalived.conf] at time 06:59:10.891967 duration_in_ms=65.024
2019-02-18 06:59:10,893 [salt.state       :1780][INFO    ][3042] Running state [keepalived] at time 06:59:10.893278
2019-02-18 06:59:10,893 [salt.state       :1813][INFO    ][3042] Executing state service.running for [keepalived]
2019-02-18 06:59:10,894 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2019-02-18 06:59:10,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-02-18 06:59:10,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-02-18 06:59:10,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2019-02-18 06:59:10,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-02-18 06:59:11,007 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-02-18 06:59:11,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3042] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-02-18 06:59:11,032 [salt.state       :300 ][INFO    ][3042] {'keepalived': True}
2019-02-18 06:59:11,033 [salt.state       :1951][INFO    ][3042] Completed state [keepalived] at time 06:59:11.033137 duration_in_ms=139.856
2019-02-18 06:59:11,034 [salt.minion      :1711][INFO    ][3042] Returning information for job: 20190218065903443408
2019-02-18 07:00:20,333 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command pillar.get with jid 20190218070020325155
2019-02-18 07:00:20,346 [salt.minion      :1432][INFO    ][4366] Starting a new job with PID 4366
2019-02-18 07:00:20,351 [salt.minion      :1711][INFO    ][4366] Returning information for job: 20190218070020325155
2019-02-18 07:10:14,161 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218071014154808
2019-02-18 07:10:14,172 [salt.minion      :1432][INFO    ][4371] Starting a new job with PID 4371
2019-02-18 07:10:20,074 [salt.state       :915 ][INFO    ][4371] Loading fresh modules for state activity
2019-02-18 07:10:20,517 [salt.fileclient  :1219][INFO    ][4371] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2019-02-18 07:10:20,544 [salt.fileclient  :1219][INFO    ][4371] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2019-02-18 07:10:20,569 [salt.fileclient  :1219][INFO    ][4371] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2019-02-18 07:10:21,165 [salt.state       :1780][INFO    ][4371] Running state [memcached] at time 07:10:21.165629
2019-02-18 07:10:21,166 [salt.state       :1813][INFO    ][4371] Executing state pkg.installed for [memcached]
2019-02-18 07:10:21,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:10:21,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2019-02-18 07:10:21,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 07:10:22,948 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:10:22,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2019-02-18 07:10:25,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:10:25,629 [salt.state       :300 ][INFO    ][4371] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2019-02-18 07:10:25,648 [salt.state       :915 ][INFO    ][4371] Loading fresh modules for state activity
2019-02-18 07:10:25,686 [salt.state       :1951][INFO    ][4371] Completed state [memcached] at time 07:10:25.686344 duration_in_ms=4520.715
2019-02-18 07:10:25,691 [salt.state       :1780][INFO    ][4371] Running state [python-memcache] at time 07:10:25.691422
2019-02-18 07:10:25,691 [salt.state       :1813][INFO    ][4371] Executing state pkg.installed for [python-memcache]
2019-02-18 07:10:26,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:10:26,326 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2019-02-18 07:10:27,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:10:27,876 [salt.state       :300 ][INFO    ][4371] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2019-02-18 07:10:27,896 [salt.state       :915 ][INFO    ][4371] Loading fresh modules for state activity
2019-02-18 07:10:27,931 [salt.state       :1951][INFO    ][4371] Completed state [python-memcache] at time 07:10:27.931787 duration_in_ms=2240.365
2019-02-18 07:10:27,936 [salt.state       :1780][INFO    ][4371] Running state [/etc/memcached.conf] at time 07:10:27.936653
2019-02-18 07:10:27,937 [salt.state       :1813][INFO    ][4371] Executing state file.managed for [/etc/memcached.conf]
2019-02-18 07:10:27,962 [salt.fileclient  :1219][INFO    ][4371] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2019-02-18 07:10:27,997 [salt.state       :300 ][INFO    ][4371] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2019-02-18 07:10:28,005 [salt.state       :1951][INFO    ][4371] Completed state [/etc/memcached.conf] at time 07:10:28.005539 duration_in_ms=68.885
2019-02-18 07:10:28,460 [salt.state       :1780][INFO    ][4371] Running state [memcached] at time 07:10:28.460666
2019-02-18 07:10:28,461 [salt.state       :1813][INFO    ][4371] Executing state service.running for [memcached]
2019-02-18 07:10:28,462 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2019-02-18 07:10:28,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-02-18 07:10:28,493 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2019-02-18 07:10:28,507 [salt.state       :300 ][INFO    ][4371] The service memcached is already running
2019-02-18 07:10:28,507 [salt.state       :1951][INFO    ][4371] Completed state [memcached] at time 07:10:28.507739 duration_in_ms=47.072
2019-02-18 07:10:28,508 [salt.state       :1780][INFO    ][4371] Running state [memcached] at time 07:10:28.508230
2019-02-18 07:10:28,508 [salt.state       :1813][INFO    ][4371] Executing state service.mod_watch for [memcached]
2019-02-18 07:10:28,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-02-18 07:10:28,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4371] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2019-02-18 07:10:28,546 [salt.state       :300 ][INFO    ][4371] {'memcached': True}
2019-02-18 07:10:28,549 [salt.state       :1951][INFO    ][4371] Completed state [memcached] at time 07:10:28.549640 duration_in_ms=41.409
2019-02-18 07:10:28,551 [salt.minion      :1711][INFO    ][4371] Returning information for job: 20190218071014154808
2019-02-18 07:10:29,691 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218071029684659
2019-02-18 07:10:29,703 [salt.minion      :1432][INFO    ][5323] Starting a new job with PID 5323
2019-02-18 07:10:30,879 [salt.state       :915 ][INFO    ][5323] Loading fresh modules for state activity
2019-02-18 07:10:31,104 [salt.fileclient  :1219][INFO    ][5323] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2019-02-18 07:10:31,171 [salt.fileclient  :1219][INFO    ][5323] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2019-02-18 07:10:31,853 [salt.state       :1780][INFO    ][5323] Running state [haproxy] at time 07:10:31.853017
2019-02-18 07:10:31,854 [salt.state       :1813][INFO    ][5323] Executing state pkg.installed for [haproxy]
2019-02-18 07:10:31,854 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:10:32,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2019-02-18 07:10:32,254 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 07:10:33,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:10:33,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2019-02-18 07:10:36,676 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:10:36,709 [salt.state       :300 ][INFO    ][5323] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.2'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2019-02-18 07:10:36,728 [salt.state       :915 ][INFO    ][5323] Loading fresh modules for state activity
2019-02-18 07:10:36,774 [salt.state       :1951][INFO    ][5323] Completed state [haproxy] at time 07:10:36.774382 duration_in_ms=4921.366
2019-02-18 07:10:36,779 [salt.state       :1780][INFO    ][5323] Running state [/etc/default/haproxy] at time 07:10:36.779284
2019-02-18 07:10:36,779 [salt.state       :1813][INFO    ][5323] Executing state file.managed for [/etc/default/haproxy]
2019-02-18 07:10:36,812 [salt.fileclient  :1219][INFO    ][5323] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2019-02-18 07:10:36,815 [salt.state       :300 ][INFO    ][5323] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2019-02-18 07:10:36,816 [salt.state       :1951][INFO    ][5323] Completed state [/etc/default/haproxy] at time 07:10:36.815930 duration_in_ms=36.645
2019-02-18 07:10:36,816 [salt.state       :1780][INFO    ][5323] Running state [/etc/haproxy/haproxy.cfg] at time 07:10:36.816430
2019-02-18 07:10:36,816 [salt.state       :1813][INFO    ][5323] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2019-02-18 07:10:36,836 [salt.fileclient  :1219][INFO    ][5323] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2019-02-18 07:10:37,000 [salt.state       :300 ][INFO    ][5323] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2019-02-18 07:10:37,000 [salt.state       :1951][INFO    ][5323] Completed state [/etc/haproxy/haproxy.cfg] at time 07:10:37.000677 duration_in_ms=184.246
2019-02-18 07:10:37,001 [salt.state       :1780][INFO    ][5323] Running state [/etc/haproxy/ssl] at time 07:10:37.001227
2019-02-18 07:10:37,001 [salt.state       :1813][INFO    ][5323] Executing state file.directory for [/etc/haproxy/ssl]
2019-02-18 07:10:37,004 [salt.state       :300 ][INFO    ][5323] {'/etc/haproxy/ssl': 'New Dir'}
2019-02-18 07:10:37,004 [salt.state       :1951][INFO    ][5323] Completed state [/etc/haproxy/ssl] at time 07:10:37.004292 duration_in_ms=3.064
2019-02-18 07:10:37,004 [salt.state       :1780][INFO    ][5323] Running state [/etc/haproxy/errors/429.http11] at time 07:10:37.004714
2019-02-18 07:10:37,005 [salt.state       :1813][INFO    ][5323] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2019-02-18 07:10:37,036 [salt.fileclient  :1219][INFO    ][5323] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2019-02-18 07:10:37,044 [salt.state       :300 ][INFO    ][5323] File changed:
New file
2019-02-18 07:10:37,045 [salt.state       :1951][INFO    ][5323] Completed state [/etc/haproxy/errors/429.http11] at time 07:10:37.045060 duration_in_ms=40.346
2019-02-18 07:10:37,046 [salt.state       :1780][INFO    ][5323] Running state [haproxy_status_packages] at time 07:10:37.046343
2019-02-18 07:10:37,046 [salt.state       :1813][INFO    ][5323] Executing state pkg.installed for [haproxy_status_packages]
2019-02-18 07:10:37,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:10:37,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2019-02-18 07:10:39,151 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:10:39,186 [salt.state       :300 ][INFO    ][5323] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2019-02-18 07:10:39,201 [salt.state       :915 ][INFO    ][5323] Loading fresh modules for state activity
2019-02-18 07:10:39,242 [salt.state       :1951][INFO    ][5323] Completed state [haproxy_status_packages] at time 07:10:39.242336 duration_in_ms=2195.992
2019-02-18 07:10:39,245 [salt.state       :1780][INFO    ][5323] Running state [/usr/bin/haproxy-status.sh] at time 07:10:39.245794
2019-02-18 07:10:39,246 [salt.state       :1813][INFO    ][5323] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2019-02-18 07:10:39,264 [salt.fileclient  :1219][INFO    ][5323] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2019-02-18 07:10:39,290 [salt.state       :300 ][INFO    ][5323] File changed:
New file
2019-02-18 07:10:39,290 [salt.state       :1951][INFO    ][5323] Completed state [/usr/bin/haproxy-status.sh] at time 07:10:39.290886 duration_in_ms=45.092
2019-02-18 07:10:39,294 [salt.state       :1780][INFO    ][5323] Running state [net.ipv4.ip_nonlocal_bind] at time 07:10:39.294182
2019-02-18 07:10:39,294 [salt.state       :1813][INFO    ][5323] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2019-02-18 07:10:39,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2019-02-18 07:10:39,310 [salt.state       :300 ][INFO    ][5323] {'net.ipv4.ip_nonlocal_bind': 1}
2019-02-18 07:10:39,311 [salt.state       :1951][INFO    ][5323] Completed state [net.ipv4.ip_nonlocal_bind] at time 07:10:39.311293 duration_in_ms=17.111
2019-02-18 07:10:39,779 [salt.state       :1780][INFO    ][5323] Running state [haproxy] at time 07:10:39.779670
2019-02-18 07:10:39,780 [salt.state       :1813][INFO    ][5323] Executing state service.running for [haproxy]
2019-02-18 07:10:39,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-02-18 07:10:39,795 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-02-18 07:10:39,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-02-18 07:10:39,819 [salt.state       :300 ][INFO    ][5323] The service haproxy is already running
2019-02-18 07:10:39,819 [salt.state       :1951][INFO    ][5323] Completed state [haproxy] at time 07:10:39.819758 duration_in_ms=40.087
2019-02-18 07:10:39,820 [salt.state       :1780][INFO    ][5323] Running state [haproxy] at time 07:10:39.820202
2019-02-18 07:10:39,820 [salt.state       :1813][INFO    ][5323] Executing state service.mod_watch for [haproxy]
2019-02-18 07:10:39,821 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-02-18 07:10:39,833 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5323] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2019-02-18 07:10:39,857 [salt.state       :300 ][INFO    ][5323] {'haproxy': True}
2019-02-18 07:10:39,858 [salt.state       :1951][INFO    ][5323] Completed state [haproxy] at time 07:10:39.858019 duration_in_ms=37.816
2019-02-18 07:10:39,861 [salt.minion      :1711][INFO    ][5323] Returning information for job: 20190218071029684659
2019-02-18 07:10:41,487 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command service.status with jid 20190218071041480402
2019-02-18 07:10:41,498 [salt.minion      :1432][INFO    ][6471] Starting a new job with PID 6471
2019-02-18 07:10:41,917 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6471] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-02-18 07:10:41,932 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6471] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-02-18 07:10:41,944 [salt.minion      :1711][INFO    ][6471] Returning information for job: 20190218071041480402
2019-02-18 07:10:42,895 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command service.restart with jid 20190218071042886905
2019-02-18 07:10:42,906 [salt.minion      :1432][INFO    ][6481] Starting a new job with PID 6481
2019-02-18 07:10:43,324 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6481] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2019-02-18 07:10:43,350 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6481] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2019-02-18 07:10:43,381 [salt.minion      :1711][INFO    ][6481] Returning information for job: 20190218071042886905
2019-02-18 07:32:14,157 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218073214150046
2019-02-18 07:32:14,168 [salt.minion      :1432][INFO    ][6558] Starting a new job with PID 6558
2019-02-18 07:32:14,972 [salt.state       :915 ][INFO    ][6558] Loading fresh modules for state activity
2019-02-18 07:32:15,024 [salt.fileclient  :1219][INFO    ][6558] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2019-02-18 07:32:15,054 [salt.fileclient  :1219][INFO    ][6558] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2019-02-18 07:32:15,078 [salt.fileclient  :1219][INFO    ][6558] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2019-02-18 07:32:15,114 [salt.fileclient  :1219][INFO    ][6558] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2019-02-18 07:32:15,735 [salt.state       :1780][INFO    ][6558] Running state [redis-server] at time 07:32:15.735533
2019-02-18 07:32:15,736 [salt.state       :1813][INFO    ][6558] Executing state pkg.installed for [redis-server]
2019-02-18 07:32:15,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:32:16,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2019-02-18 07:32:16,095 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 07:32:17,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:32:17,507 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2019-02-18 07:32:20,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:32:20,595 [salt.state       :300 ][INFO    ][6558] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2019-02-18 07:32:20,615 [salt.state       :915 ][INFO    ][6558] Loading fresh modules for state activity
2019-02-18 07:32:20,654 [salt.state       :1951][INFO    ][6558] Completed state [redis-server] at time 07:32:20.654389 duration_in_ms=4918.856
2019-02-18 07:32:20,658 [salt.state       :1780][INFO    ][6558] Running state [vm.overcommit_memory] at time 07:32:20.658611
2019-02-18 07:32:20,658 [salt.state       :1813][INFO    ][6558] Executing state sysctl.present for [vm.overcommit_memory]
2019-02-18 07:32:20,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2019-02-18 07:32:20,673 [salt.state       :300 ][INFO    ][6558] {'vm.overcommit_memory': 1}
2019-02-18 07:32:20,674 [salt.state       :1951][INFO    ][6558] Completed state [vm.overcommit_memory] at time 07:32:20.674177 duration_in_ms=15.564
2019-02-18 07:32:20,677 [salt.state       :1780][INFO    ][6558] Running state [/etc/redis/redis.conf] at time 07:32:20.677526
2019-02-18 07:32:20,677 [salt.state       :1813][INFO    ][6558] Executing state file.managed for [/etc/redis/redis.conf]
2019-02-18 07:32:20,706 [salt.fileclient  :1219][INFO    ][6558] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2019-02-18 07:32:20,768 [salt.state       :300 ][INFO    ][6558] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 192.168.10.32
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -695,8 +694,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -725,9 +723,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1371,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2019-02-18 07:32:20,769 [salt.state       :1951][INFO    ][6558] Completed state [/etc/redis/redis.conf] at time 07:32:20.769399 duration_in_ms=91.873
2019-02-18 07:32:21,227 [salt.state       :1780][INFO    ][6558] Running state [redis-server] at time 07:32:21.227845
2019-02-18 07:32:21,228 [salt.state       :1813][INFO    ][6558] Executing state service.running for [redis-server]
2019-02-18 07:32:21,228 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2019-02-18 07:32:21,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:21,256 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:21,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:21,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:21,357 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:21,372 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:21,388 [salt.state       :300 ][INFO    ][6558] {'redis-server': True}
2019-02-18 07:32:21,388 [salt.state       :1951][INFO    ][6558] Completed state [redis-server] at time 07:32:21.388563 duration_in_ms=160.716
2019-02-18 07:32:21,390 [salt.state       :1780][INFO    ][6558] Running state [redis-sentinel] at time 07:32:21.390691
2019-02-18 07:32:21,391 [salt.state       :1813][INFO    ][6558] Executing state pkg.installed for [redis-sentinel]
2019-02-18 07:32:21,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:32:21,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2019-02-18 07:32:24,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:32:24,162 [salt.state       :300 ][INFO    ][6558] Made the following changes:
'redis-sentinel' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'

2019-02-18 07:32:24,178 [salt.state       :915 ][INFO    ][6558] Loading fresh modules for state activity
2019-02-18 07:32:24,213 [salt.state       :1951][INFO    ][6558] Completed state [redis-sentinel] at time 07:32:24.213708 duration_in_ms=2823.015
2019-02-18 07:32:24,643 [salt.state       :1780][INFO    ][6558] Running state [/etc/redis/sentinel.conf] at time 07:32:24.643040
2019-02-18 07:32:24,643 [salt.state       :1813][INFO    ][6558] Executing state file.managed for [/etc/redis/sentinel.conf]
2019-02-18 07:32:24,667 [salt.fileclient  :1219][INFO    ][6558] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/sentinel.conf'
2019-02-18 07:32:24,701 [salt.state       :300 ][INFO    ][6558] File changed:
--- 
+++ 
@@ -1,7 +1,3 @@
-# Example sentinel.conf
-
-# *** IMPORTANT ***
-#
 # By default Sentinel will not be reachable from interfaces different than
 # localhost, either use the 'bind' directive to bind to a list of network
 # interfaces, or disable protected mode with "protected-mode no" by
@@ -13,7 +9,7 @@
 # For example you may use one of the following:
 #
 # bind 127.0.0.1 192.168.1.1
-bind 127.0.0.1 ::1
+bind 192.168.10.32
 #
 # protected-mode no
 
@@ -82,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -111,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -119,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -144,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -168,7 +164,7 @@
 # NOTIFICATION SCRIPT
 #
 # sentinel notification-script <master-name> <script-path>
-# 
+#
 # Call the specified notification script for any sentinel event that is
 # generated in the WARNING level (for instance -sdown, -odown, and so forth).
 # This script should notify the system administrator via email, SMS, or any
@@ -192,14 +188,14 @@
 # When the master changed because of a failover a script can be called in
 # order to perform application-specific tasks to notify the clients that the
 # configuration has changed and the master is at a different address.
-# 
+#
 # The following arguments are passed to the script:
 #
 # <master-name> <role> <state> <from-ip> <from-port> <to-ip> <to-port>
 #
 # <state> is currently always "failover"
 # <role> is either "leader" or "observer"
-# 
+#
 # The arguments from-ip, from-port, to-ip, to-port are used to communicate
 # the old address of the master and the new address of the elected replica
 # (now a master).

2019-02-18 07:32:24,702 [salt.state       :1951][INFO    ][6558] Completed state [/etc/redis/sentinel.conf] at time 07:32:24.702683 duration_in_ms=59.642
2019-02-18 07:32:24,703 [salt.state       :1780][INFO    ][6558] Running state [redis-sentinel] at time 07:32:24.703092
2019-02-18 07:32:24,703 [salt.state       :1813][INFO    ][6558] Executing state service.running for [redis-sentinel]
2019-02-18 07:32:24,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2019-02-18 07:32:24,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:24,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:24,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:24,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:24,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:24,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6558] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:24,843 [salt.state       :300 ][INFO    ][6558] {'redis-sentinel': True}
2019-02-18 07:32:24,844 [salt.state       :1951][INFO    ][6558] Completed state [redis-sentinel] at time 07:32:24.844503 duration_in_ms=141.408
2019-02-18 07:32:24,846 [salt.minion      :1711][INFO    ][6558] Returning information for job: 20190218073214150046
2019-02-18 07:32:25,556 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218073225547966
2019-02-18 07:32:25,566 [salt.minion      :1432][INFO    ][8000] Starting a new job with PID 8000
2019-02-18 07:32:26,424 [salt.state       :915 ][INFO    ][8000] Loading fresh modules for state activity
2019-02-18 07:32:27,148 [salt.state       :1780][INFO    ][8000] Running state [redis-server] at time 07:32:27.148706
2019-02-18 07:32:27,149 [salt.state       :1813][INFO    ][8000] Executing state pkg.installed for [redis-server]
2019-02-18 07:32:27,150 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:32:27,429 [salt.state       :300 ][INFO    ][8000] All specified packages are already installed
2019-02-18 07:32:27,429 [salt.state       :1951][INFO    ][8000] Completed state [redis-server] at time 07:32:27.429795 duration_in_ms=281.098
2019-02-18 07:32:27,431 [salt.state       :1780][INFO    ][8000] Running state [vm.overcommit_memory] at time 07:32:27.431387
2019-02-18 07:32:27,431 [salt.state       :1813][INFO    ][8000] Executing state sysctl.present for [vm.overcommit_memory]
2019-02-18 07:32:27,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2019-02-18 07:32:27,454 [salt.state       :300 ][INFO    ][8000] Sysctl value vm.overcommit_memory = 1 is already set
2019-02-18 07:32:27,454 [salt.state       :1951][INFO    ][8000] Completed state [vm.overcommit_memory] at time 07:32:27.454894 duration_in_ms=23.504
2019-02-18 07:32:27,458 [salt.state       :1780][INFO    ][8000] Running state [/etc/redis/redis.conf] at time 07:32:27.458661
2019-02-18 07:32:27,459 [salt.state       :1813][INFO    ][8000] Executing state file.managed for [/etc/redis/redis.conf]
2019-02-18 07:32:27,534 [salt.state       :300 ][INFO    ][8000] File /etc/redis/redis.conf is in the correct state
2019-02-18 07:32:27,535 [salt.state       :1951][INFO    ][8000] Completed state [/etc/redis/redis.conf] at time 07:32:27.535082 duration_in_ms=76.421
2019-02-18 07:32:27,536 [salt.state       :1780][INFO    ][8000] Running state [redis-server] at time 07:32:27.536188
2019-02-18 07:32:27,536 [salt.state       :1813][INFO    ][8000] Executing state service.running for [redis-server]
2019-02-18 07:32:27,537 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2019-02-18 07:32:27,551 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:27,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-18 07:32:27,574 [salt.state       :300 ][INFO    ][8000] The service redis-server is already running
2019-02-18 07:32:27,574 [salt.state       :1951][INFO    ][8000] Completed state [redis-server] at time 07:32:27.574890 duration_in_ms=38.7
2019-02-18 07:32:27,575 [salt.state       :1780][INFO    ][8000] Running state [redis-sentinel] at time 07:32:27.575508
2019-02-18 07:32:27,576 [salt.state       :1813][INFO    ][8000] Executing state pkg.installed for [redis-sentinel]
2019-02-18 07:32:27,585 [salt.state       :300 ][INFO    ][8000] All specified packages are already installed
2019-02-18 07:32:27,585 [salt.state       :1951][INFO    ][8000] Completed state [redis-sentinel] at time 07:32:27.585325 duration_in_ms=9.817
2019-02-18 07:32:27,586 [salt.state       :1780][INFO    ][8000] Running state [/etc/redis/sentinel.conf] at time 07:32:27.586520
2019-02-18 07:32:27,586 [salt.state       :1813][INFO    ][8000] Executing state file.managed for [/etc/redis/sentinel.conf]
2019-02-18 07:32:27,633 [salt.state       :300 ][INFO    ][8000] File changed:
--- 
+++ 
@@ -25,12 +25,12 @@
 # When running daemonized, Redis Sentinel writes a pid file in
 # /var/run/redis-sentinel.pid by default. You can specify a custom pid file
 # location here.
-pidfile "/var/run/sentinel/redis-sentinel.pid"
+pidfile /var/run/sentinel/redis-sentinel.pid
 
 # Specify the log file name. Also the empty string can be used to force
 # Sentinel to log on the standard output. Note that if you use standard
 # output for logging but daemonize, logs will be sent to /dev/null
-logfile "/var/log/redis/redis-sentinel.log"
+logfile /var/log/redis/redis-sentinel.log
 
 # sentinel announce-ip <ip>
 # sentinel announce-port <port>
@@ -59,7 +59,7 @@
 # For Redis Sentinel to chdir to /tmp at startup is the simplest thing
 # for the process to don't interfere with administrative tasks such as
 # unmounting filesystems.
-dir "/var/lib/redis"
+dir /var/lib/redis
 
 # sentinel monitor <master-name> <ip> <redis-port> <quorum>
 #
@@ -78,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel myid 6b8cb141e7824bc2939c94b29b7e6dcea10be63d
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -107,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel deny-scripts-reconfig yes
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -115,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel monitor master_1 192.168.10.32 6379 2
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -140,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel config-epoch master_1 0
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -213,7 +213,7 @@
 # where clients can set the script to anything and trigger a failover in order
 # to get the program executed.
 
-sentinel leader-epoch master_1 0
+sentinel deny-scripts-reconfig yes
 
 # REDIS COMMANDS RENAMING
 #
@@ -239,5 +239,3 @@
 # is possible to just rename a command to itsef:
 #
 # SENTINEL rename-command mymaster CONFIG CONFIG
-# Generated by CONFIG REWRITE
-sentinel current-epoch 0

2019-02-18 07:32:27,633 [salt.state       :1951][INFO    ][8000] Completed state [/etc/redis/sentinel.conf] at time 07:32:27.633899 duration_in_ms=47.379
2019-02-18 07:32:27,634 [salt.state       :1780][INFO    ][8000] Running state [redis-sentinel] at time 07:32:27.634248
2019-02-18 07:32:27,634 [salt.state       :1813][INFO    ][8000] Executing state service.running for [redis-sentinel]
2019-02-18 07:32:27,634 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2019-02-18 07:32:27,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:27,660 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:27,671 [salt.state       :300 ][INFO    ][8000] The service redis-sentinel is already running
2019-02-18 07:32:27,672 [salt.state       :1951][INFO    ][8000] Completed state [redis-sentinel] at time 07:32:27.672413 duration_in_ms=38.162
2019-02-18 07:32:27,672 [salt.state       :1780][INFO    ][8000] Running state [redis-sentinel] at time 07:32:27.672864
2019-02-18 07:32:27,673 [salt.state       :1813][INFO    ][8000] Executing state service.mod_watch for [redis-sentinel]
2019-02-18 07:32:27,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:27,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8000] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2019-02-18 07:32:27,779 [salt.state       :300 ][INFO    ][8000] {'redis-sentinel': True}
2019-02-18 07:32:27,779 [salt.state       :1951][INFO    ][8000] Completed state [redis-sentinel] at time 07:32:27.779714 duration_in_ms=106.85
2019-02-18 07:32:27,781 [salt.minion      :1711][INFO    ][8000] Returning information for job: 20190218073225547966
2019-02-18 07:32:36,812 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command test.ping with jid 20190218073236803296
2019-02-18 07:32:36,824 [salt.minion      :1432][INFO    ][8095] Starting a new job with PID 8095
2019-02-18 07:32:36,841 [salt.minion      :1711][INFO    ][8095] Returning information for job: 20190218073236803296
2019-02-18 07:32:36,965 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218073236953375
2019-02-18 07:32:36,976 [salt.minion      :1432][INFO    ][8100] Starting a new job with PID 8100
2019-02-18 07:32:42,675 [salt.state       :915 ][INFO    ][8100] Loading fresh modules for state activity
2019-02-18 07:32:42,727 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2019-02-18 07:32:42,757 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2019-02-18 07:32:42,822 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2019-02-18 07:32:42,852 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2019-02-18 07:32:42,882 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2019-02-18 07:32:42,956 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2019-02-18 07:32:43,022 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2019-02-18 07:32:43,092 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2019-02-18 07:32:43,232 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2019-02-18 07:32:43,297 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2019-02-18 07:32:43,358 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2019-02-18 07:32:43,405 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2019-02-18 07:32:44,041 [salt.state       :1780][INFO    ][8100] Running state [apache2] at time 07:32:44.041076
2019-02-18 07:32:44,041 [salt.state       :1813][INFO    ][8100] Executing state pkg.installed for [apache2]
2019-02-18 07:32:44,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:32:44,340 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2019-02-18 07:32:44,402 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 07:32:45,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:32:45,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2019-02-18 07:32:51,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:32:51,430 [salt.state       :300 ][INFO    ][8100] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2019-02-18 07:32:51,450 [salt.state       :915 ][INFO    ][8100] Loading fresh modules for state activity
2019-02-18 07:32:51,487 [salt.state       :1951][INFO    ][8100] Completed state [apache2] at time 07:32:51.487169 duration_in_ms=7446.093
2019-02-18 07:32:51,495 [salt.state       :1780][INFO    ][8100] Running state [openssl] at time 07:32:51.495363
2019-02-18 07:32:51,495 [salt.state       :1813][INFO    ][8100] Executing state pkg.installed for [openssl]
2019-02-18 07:32:52,042 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218073252028632
2019-02-18 07:32:52,055 [salt.minion      :1432][INFO    ][9577] Starting a new job with PID 9577
2019-02-18 07:32:52,068 [salt.minion      :1711][INFO    ][9577] Returning information for job: 20190218073252028632
2019-02-18 07:32:52,115 [salt.state       :300 ][INFO    ][8100] All specified packages are already installed
2019-02-18 07:32:52,115 [salt.state       :1951][INFO    ][8100] Completed state [openssl] at time 07:32:52.115306 duration_in_ms=619.941
2019-02-18 07:32:52,116 [salt.state       :1780][INFO    ][8100] Running state [a2enmod rewrite] at time 07:32:52.116535
2019-02-18 07:32:52,116 [salt.state       :1813][INFO    ][8100] Executing state cmd.run for [a2enmod rewrite]
2019-02-18 07:32:52,117 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command 'a2enmod rewrite' in directory '/root'
2019-02-18 07:32:52,162 [salt.state       :300 ][INFO    ][8100] {'pid': 9581, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-02-18 07:32:52,162 [salt.state       :1951][INFO    ][8100] Completed state [a2enmod rewrite] at time 07:32:52.162537 duration_in_ms=46.001
2019-02-18 07:32:52,163 [salt.state       :1780][INFO    ][8100] Running state [libapache2-mod-wsgi] at time 07:32:52.163200
2019-02-18 07:32:52,163 [salt.state       :1813][INFO    ][8100] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-02-18 07:32:52,186 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:32:52,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2019-02-18 07:32:56,155 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:32:56,192 [salt.state       :300 ][INFO    ][8100] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'

2019-02-18 07:32:56,210 [salt.state       :915 ][INFO    ][8100] Loading fresh modules for state activity
2019-02-18 07:32:56,247 [salt.state       :1951][INFO    ][8100] Completed state [libapache2-mod-wsgi] at time 07:32:56.247699 duration_in_ms=4084.497
2019-02-18 07:32:56,250 [salt.state       :1780][INFO    ][8100] Running state [a2enmod wsgi] at time 07:32:56.250337
2019-02-18 07:32:56,250 [salt.state       :1813][INFO    ][8100] Executing state cmd.run for [a2enmod wsgi]
2019-02-18 07:32:56,250 [salt.state       :300 ][INFO    ][8100] /etc/apache2/mods-enabled/wsgi.load exists
2019-02-18 07:32:56,251 [salt.state       :1951][INFO    ][8100] Completed state [a2enmod wsgi] at time 07:32:56.251158 duration_in_ms=0.821
2019-02-18 07:32:56,254 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 07:32:56.254942
2019-02-18 07:32:56,255 [salt.state       :1813][INFO    ][8100] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-02-18 07:32:56,289 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2019-02-18 07:32:56,340 [salt.state       :300 ][INFO    ][8100] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2019-02-18 07:32:56,341 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 07:32:56.341063 duration_in_ms=86.121
2019-02-18 07:32:56,341 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 07:32:56.341289
2019-02-18 07:32:56,341 [salt.state       :1813][INFO    ][8100] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-02-18 07:32:56,341 [salt.state       :300 ][INFO    ][8100] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-02-18 07:32:56,342 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 07:32:56.341965 duration_in_ms=0.674
2019-02-18 07:32:56,342 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 07:32:56.342188
2019-02-18 07:32:56,342 [salt.state       :1813][INFO    ][8100] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-02-18 07:32:56,342 [salt.state       :300 ][INFO    ][8100] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2019-02-18 07:32:56,342 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 07:32:56.342836 duration_in_ms=0.648
2019-02-18 07:32:56,343 [salt.state       :1780][INFO    ][8100] Running state [a2enmod mpm_prefork] at time 07:32:56.343520
2019-02-18 07:32:56,343 [salt.state       :1813][INFO    ][8100] Executing state cmd.run for [a2enmod mpm_prefork]
2019-02-18 07:32:56,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command 'a2enmod mpm_prefork' in directory '/root'
2019-02-18 07:32:56,394 [salt.state       :300 ][INFO    ][8100] {'pid': 9907, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-02-18 07:32:56,394 [salt.state       :1951][INFO    ][8100] Completed state [a2enmod mpm_prefork] at time 07:32:56.394520 duration_in_ms=50.999
2019-02-18 07:32:56,395 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 07:32:56.395206
2019-02-18 07:32:56,395 [salt.state       :1813][INFO    ][8100] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-02-18 07:32:56,396 [salt.state       :300 ][INFO    ][8100] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-02-18 07:32:56,396 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 07:32:56.396830 duration_in_ms=1.624
2019-02-18 07:32:56,397 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 07:32:56.397229
2019-02-18 07:32:56,397 [salt.state       :1813][INFO    ][8100] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-02-18 07:32:56,398 [salt.state       :300 ][INFO    ][8100] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2019-02-18 07:32:56,398 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 07:32:56.398493 duration_in_ms=1.264
2019-02-18 07:32:56,400 [salt.state       :1780][INFO    ][8100] Running state [apache_server_service_task] at time 07:32:56.400828
2019-02-18 07:32:56,401 [salt.state       :1813][INFO    ][8100] Executing state test.show_notification for [apache_server_service_task]
2019-02-18 07:32:56,401 [salt.state       :300 ][INFO    ][8100] Running apache.server.service
2019-02-18 07:32:56,402 [salt.state       :1951][INFO    ][8100] Completed state [apache_server_service_task] at time 07:32:56.402065 duration_in_ms=1.236
2019-02-18 07:32:56,402 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/ports.conf] at time 07:32:56.402817
2019-02-18 07:32:56,403 [salt.state       :1813][INFO    ][8100] Executing state file.managed for [/etc/apache2/ports.conf]
2019-02-18 07:32:56,425 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2019-02-18 07:32:56,479 [salt.state       :300 ][INFO    ][8100] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2019-02-18 07:32:56,481 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/ports.conf] at time 07:32:56.481904 duration_in_ms=79.086
2019-02-18 07:32:56,482 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/conf-available/security.conf] at time 07:32:56.482514
2019-02-18 07:32:56,482 [salt.state       :1813][INFO    ][8100] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-02-18 07:32:56,501 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2019-02-18 07:32:56,550 [salt.state       :300 ][INFO    ][8100] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2019-02-18 07:32:56,562 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/conf-available/security.conf] at time 07:32:56.562097 duration_in_ms=79.582
2019-02-18 07:32:56,983 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 07:32:56.983111
2019-02-18 07:32:56,983 [salt.state       :1813][INFO    ][8100] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-02-18 07:32:56,984 [salt.state       :300 ][INFO    ][8100] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2019-02-18 07:32:56,984 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 07:32:56.984814 duration_in_ms=1.704
2019-02-18 07:32:56,985 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 07:32:56.985376
2019-02-18 07:32:56,985 [salt.state       :1813][INFO    ][8100] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-02-18 07:32:57,005 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2019-02-18 07:32:57,030 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2019-02-18 07:32:57,082 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2019-02-18 07:32:57,102 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2019-02-18 07:32:57,173 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2019-02-18 07:32:57,192 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2019-02-18 07:32:57,214 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2019-02-18 07:32:57,223 [salt.state       :300 ][INFO    ][8100] File changed:
New file
2019-02-18 07:32:57,224 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 07:32:57.223984 duration_in_ms=238.607
2019-02-18 07:32:57,224 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 07:32:57.224585
2019-02-18 07:32:57,224 [salt.state       :1813][INFO    ][8100] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-02-18 07:32:57,408 [salt.state       :300 ][INFO    ][8100] File changed:
New file
2019-02-18 07:32:57,409 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 07:32:57.409221 duration_in_ms=184.636
2019-02-18 07:32:57,411 [salt.state       :1780][INFO    ][8100] Running state [apache2] at time 07:32:57.411183
2019-02-18 07:32:57,411 [salt.state       :1813][INFO    ][8100] Executing state service.running for [apache2]
2019-02-18 07:32:57,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-02-18 07:32:57,429 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:32:57,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:32:57,460 [salt.state       :300 ][INFO    ][8100] The service apache2 is already running
2019-02-18 07:32:57,461 [salt.state       :1951][INFO    ][8100] Completed state [apache2] at time 07:32:57.461158 duration_in_ms=49.972
2019-02-18 07:32:57,461 [salt.state       :1780][INFO    ][8100] Running state [apache2] at time 07:32:57.461574
2019-02-18 07:32:57,462 [salt.state       :1813][INFO    ][8100] Executing state service.mod_watch for [apache2]
2019-02-18 07:32:57,462 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:32:57,477 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2019-02-18 07:32:57,614 [salt.state       :300 ][INFO    ][8100] {'apache2': True}
2019-02-18 07:32:57,614 [salt.state       :1951][INFO    ][8100] Completed state [apache2] at time 07:32:57.614528 duration_in_ms=152.954
2019-02-18 07:32:57,615 [salt.state       :1780][INFO    ][8100] Running state [/etc/apache2/conf-enabled/security.conf] at time 07:32:57.615458
2019-02-18 07:32:57,615 [salt.state       :1813][INFO    ][8100] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-02-18 07:32:57,620 [salt.state       :300 ][INFO    ][8100] {'new': '/etc/apache2/conf-enabled/security.conf'}
2019-02-18 07:32:57,620 [salt.state       :1951][INFO    ][8100] Completed state [/etc/apache2/conf-enabled/security.conf] at time 07:32:57.620593 duration_in_ms=5.135
2019-02-18 07:32:57,622 [salt.state       :1780][INFO    ][8100] Running state [gnocchi-common] at time 07:32:57.622310
2019-02-18 07:32:57,622 [salt.state       :1813][INFO    ][8100] Executing state pkg.installed for [gnocchi-common]
2019-02-18 07:32:57,816 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:32:57,838 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2019-02-18 07:33:20,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:33:20,602 [salt.state       :300 ][INFO    ][8100] Made the following changes:
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-os-service-types' changed from 'absent' to '1.3.0-1~u16.04+mcp'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-editor' changed from 'absent' to '0.4-2'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.6.0+dfsg.1-1~u16.04+mcp'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~u16.04+mcp'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.40.0-1~u16.04+mcp'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.5'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'liblapack.so.3' changed from 'absent' to '1'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.21.0-1~u16.04+mcp'
'python-oslo.cache' changed from 'absent' to '1.30.2-1~u16.04+mcp3'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.6.0+dfsg.1-1~u16.04+mcp'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-debtcollector' changed from 'absent' to '1.20.0-2~u16.04+mcp'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python-lxml' changed from 'absent' to '3.5.0-1ubuntu0.1'
'python-oslo.config' changed from 'absent' to '1:6.4.0-1~u16.04+mcp'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'python2.7-testscenarios' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.27.0-1~u16.04+mcp'
'python-oslo.utils' changed from 'absent' to '3.36.4-1~u16.04+mcp'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.21.0-1~u16.04+mcp'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python2.7-simplejson' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.39.0-1~u16.04+mcp'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-pbr' changed from 'absent' to '4.2.0-4~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.3.0-1~u16.04+mcp'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp4'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-keystoneclient' changed from 'absent' to '1:3.17.0-1~u16.04+mcp4'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystoneauth1' changed from 'absent' to '3.10.0-1~u16.04+mcp10'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-stevedore' changed from 'absent' to '1:1.29.0-1~u16.04+mcp'
'python-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp8'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2019-02-18 07:33:20,624 [salt.state       :915 ][INFO    ][8100] Loading fresh modules for state activity
2019-02-18 07:33:20,661 [salt.state       :1951][INFO    ][8100] Completed state [gnocchi-common] at time 07:33:20.661567 duration_in_ms=23039.256
2019-02-18 07:33:20,664 [salt.state       :1780][INFO    ][8100] Running state [gnocchi_ssl_mysql] at time 07:33:20.664074
2019-02-18 07:33:20,664 [salt.state       :1813][INFO    ][8100] Executing state test.show_notification for [gnocchi_ssl_mysql]
2019-02-18 07:33:20,664 [salt.state       :300 ][INFO    ][8100] Running gnocchi._ssl.mysql
2019-02-18 07:33:20,664 [salt.state       :1951][INFO    ][8100] Completed state [gnocchi_ssl_mysql] at time 07:33:20.664780 duration_in_ms=0.706
2019-02-18 07:33:20,666 [salt.state       :1780][INFO    ][8100] Running state [/etc/gnocchi/gnocchi.conf] at time 07:33:20.666775
2019-02-18 07:33:20,667 [salt.state       :1813][INFO    ][8100] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2019-02-18 07:33:20,693 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2019-02-18 07:33:20,774 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2019-02-18 07:33:20,791 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2019-02-18 07:33:20,819 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2019-02-18 07:33:20,855 [salt.fileclient  :1219][INFO    ][8100] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2019-02-18 07:33:20,862 [salt.state       :300 ][INFO    ][8100] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.32:6379

2019-02-18 07:33:20,863 [salt.state       :1951][INFO    ][8100] Completed state [/etc/gnocchi/gnocchi.conf] at time 07:33:20.863170 duration_in_ms=196.394
2019-02-18 07:33:20,866 [salt.state       :1780][INFO    ][8100] Running state [gnocchi-api] at time 07:33:20.866768
2019-02-18 07:33:20,867 [salt.state       :1813][INFO    ][8100] Executing state pkg.installed for [gnocchi-api]
2019-02-18 07:33:22,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:33:22,122 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218073322110688
2019-02-18 07:33:22,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2019-02-18 07:33:22,135 [salt.minion      :1432][INFO    ][12973] Starting a new job with PID 12973
2019-02-18 07:33:22,153 [salt.minion      :1711][INFO    ][12973] Returning information for job: 20190218073322110688
2019-02-18 07:33:28,063 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:33:28,101 [salt.state       :300 ][INFO    ][8100] Made the following changes:
'python-novaclient' changed from 'absent' to '2:11.0.0-2~u16.04+mcp13'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.11.1-2~u16.04+mcp'
'python-openstacksdk' changed from 'absent' to '0.17.2-2~u16.04+mcp'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'python-glanceclient' changed from 'absent' to '1:2.13.0-3~u16.04+mcp3'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.16.1-3~u16.04+mcp8'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-cinderclient' changed from 'absent' to '1:4.0.1-1~u16.04+mcp4'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.9.1-1~u16.04+mcp4'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'

2019-02-18 07:33:28,126 [salt.state       :915 ][INFO    ][8100] Loading fresh modules for state activity
2019-02-18 07:33:28,160 [salt.state       :1951][INFO    ][8100] Completed state [gnocchi-api] at time 07:33:28.160851 duration_in_ms=7294.083
2019-02-18 07:33:28,166 [salt.state       :1780][INFO    ][8100] Running state [gnocchi-metricd] at time 07:33:28.166185
2019-02-18 07:33:28,166 [salt.state       :1813][INFO    ][8100] Executing state pkg.installed for [gnocchi-metricd]
2019-02-18 07:33:29,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:33:29,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2019-02-18 07:33:31,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:33:31,412 [salt.state       :300 ][INFO    ][8100] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2019-02-18 07:33:31,438 [salt.state       :915 ][INFO    ][8100] Loading fresh modules for state activity
2019-02-18 07:33:31,604 [salt.state       :1951][INFO    ][8100] Completed state [gnocchi-metricd] at time 07:33:31.603999 duration_in_ms=3437.814
2019-02-18 07:33:31,609 [salt.state       :1780][INFO    ][8100] Running state [python-memcache] at time 07:33:31.609230
2019-02-18 07:33:31,609 [salt.state       :1813][INFO    ][8100] Executing state pkg.installed for [python-memcache]
2019-02-18 07:33:32,253 [salt.state       :300 ][INFO    ][8100] All specified packages are already installed
2019-02-18 07:33:32,254 [salt.state       :1951][INFO    ][8100] Completed state [python-memcache] at time 07:33:32.254262 duration_in_ms=645.03
2019-02-18 07:33:32,256 [salt.state       :1780][INFO    ][8100] Running state [gnocchi-upgrade] at time 07:33:32.256027
2019-02-18 07:33:32,256 [salt.state       :1813][INFO    ][8100] Executing state cmd.run for [gnocchi-upgrade]
2019-02-18 07:33:32,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2019-02-18 07:33:34,075 [salt.state       :300 ][INFO    ][8100] {'pid': 14094, 'retcode': 0, 'stderr': '2019-02-18 07:33:33,412 [14099] INFO     gnocchi.service: Gnocchi version 4.2.4\n2019-02-18 07:33:33,717 [14099] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2019-02-18 07:33:33,991 [14099] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.32,port=6379,db=0>>>\n2019-02-18 07:33:33,992 [14099] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2019-02-18 07:33:34,076 [salt.state       :1951][INFO    ][8100] Completed state [gnocchi-upgrade] at time 07:33:34.076767 duration_in_ms=1820.738
2019-02-18 07:33:34,079 [salt.state       :1780][INFO    ][8100] Running state [wsgi_gnocchi] at time 07:33:34.079142
2019-02-18 07:33:34,079 [salt.state       :1813][INFO    ][8100] Executing state apache_site.enabled for [wsgi_gnocchi]
2019-02-18 07:33:34,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2019-02-18 07:33:34,127 [salt.state       :300 ][INFO    ][8100] {'new': 'wsgi_gnocchi', 'old': None}
2019-02-18 07:33:34,128 [salt.state       :1951][INFO    ][8100] Completed state [wsgi_gnocchi] at time 07:33:34.128045 duration_in_ms=48.902
2019-02-18 07:33:34,130 [salt.state       :1780][INFO    ][8100] Running state [apache2] at time 07:33:34.130378
2019-02-18 07:33:34,130 [salt.state       :1813][INFO    ][8100] Executing state service.running for [apache2]
2019-02-18 07:33:34,132 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:33:34,145 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:33:34,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2019-02-18 07:33:35,326 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:33:35,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:33:35,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:33:35,409 [salt.state       :300 ][INFO    ][8100] {'apache2': True}
2019-02-18 07:33:35,409 [salt.state       :1951][INFO    ][8100] Completed state [apache2] at time 07:33:35.409579 duration_in_ms=1279.197
2019-02-18 07:33:35,411 [salt.state       :1780][INFO    ][8100] Running state [gnocchi-metricd] at time 07:33:35.411235
2019-02-18 07:33:35,411 [salt.state       :1813][INFO    ][8100] Executing state service.running for [gnocchi-metricd]
2019-02-18 07:33:35,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2019-02-18 07:33:35,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:35,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:35,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:35,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:35,559 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:35,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:35,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:36,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8100] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-18 07:33:36,306 [salt.state       :300 ][INFO    ][8100] {'gnocchi-metricd': True}
2019-02-18 07:33:36,307 [salt.state       :1951][INFO    ][8100] Completed state [gnocchi-metricd] at time 07:33:36.307359 duration_in_ms=896.121
2019-02-18 07:33:36,310 [salt.minion      :1711][INFO    ][8100] Returning information for job: 20190218073236953375
2019-02-18 07:35:37,105 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command test.ping with jid 20190218073537098281
2019-02-18 07:35:37,117 [salt.minion      :1432][INFO    ][14388] Starting a new job with PID 14388
2019-02-18 07:35:37,135 [salt.minion      :1711][INFO    ][14388] Returning information for job: 20190218073537098281
2019-02-18 07:35:37,285 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218073537277185
2019-02-18 07:35:37,295 [salt.minion      :1432][INFO    ][14393] Starting a new job with PID 14393
2019-02-18 07:35:42,980 [salt.state       :915 ][INFO    ][14393] Loading fresh modules for state activity
2019-02-18 07:35:43,033 [salt.fileclient  :1219][INFO    ][14393] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2019-02-18 07:35:43,062 [salt.fileclient  :1219][INFO    ][14393] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2019-02-18 07:35:43,609 [salt.fileclient  :1219][INFO    ][14393] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2019-02-18 07:35:43,671 [salt.fileclient  :1219][INFO    ][14393] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2019-02-18 07:35:45,003 [salt.state       :1780][INFO    ][14393] Running state [apache2] at time 07:35:45.003218
2019-02-18 07:35:45,004 [salt.state       :1813][INFO    ][14393] Executing state pkg.installed for [apache2]
2019-02-18 07:35:45,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:35:45,320 [salt.state       :300 ][INFO    ][14393] All specified packages are already installed
2019-02-18 07:35:45,321 [salt.state       :1951][INFO    ][14393] Completed state [apache2] at time 07:35:45.321175 duration_in_ms=317.955
2019-02-18 07:35:45,321 [salt.state       :1780][INFO    ][14393] Running state [openssl] at time 07:35:45.321749
2019-02-18 07:35:45,322 [salt.state       :1813][INFO    ][14393] Executing state pkg.installed for [openssl]
2019-02-18 07:35:45,330 [salt.state       :300 ][INFO    ][14393] All specified packages are already installed
2019-02-18 07:35:45,331 [salt.state       :1951][INFO    ][14393] Completed state [openssl] at time 07:35:45.330988 duration_in_ms=9.238
2019-02-18 07:35:45,331 [salt.state       :1780][INFO    ][14393] Running state [a2enmod rewrite] at time 07:35:45.331800
2019-02-18 07:35:45,332 [salt.state       :1813][INFO    ][14393] Executing state cmd.run for [a2enmod rewrite]
2019-02-18 07:35:45,332 [salt.state       :300 ][INFO    ][14393] /etc/apache2/mods-enabled/rewrite.load exists
2019-02-18 07:35:45,333 [salt.state       :1951][INFO    ][14393] Completed state [a2enmod rewrite] at time 07:35:45.333320 duration_in_ms=1.519
2019-02-18 07:35:45,334 [salt.state       :1780][INFO    ][14393] Running state [libapache2-mod-wsgi] at time 07:35:45.333995
2019-02-18 07:35:45,334 [salt.state       :1813][INFO    ][14393] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-02-18 07:35:45,342 [salt.state       :300 ][INFO    ][14393] All specified packages are already installed
2019-02-18 07:35:45,343 [salt.state       :1951][INFO    ][14393] Completed state [libapache2-mod-wsgi] at time 07:35:45.343024 duration_in_ms=9.029
2019-02-18 07:35:45,343 [salt.state       :1780][INFO    ][14393] Running state [a2enmod wsgi] at time 07:35:45.343623
2019-02-18 07:35:45,344 [salt.state       :1813][INFO    ][14393] Executing state cmd.run for [a2enmod wsgi]
2019-02-18 07:35:45,344 [salt.state       :300 ][INFO    ][14393] /etc/apache2/mods-enabled/wsgi.load exists
2019-02-18 07:35:45,345 [salt.state       :1951][INFO    ][14393] Completed state [a2enmod wsgi] at time 07:35:45.344987 duration_in_ms=1.364
2019-02-18 07:35:45,350 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 07:35:45.350078
2019-02-18 07:35:45,350 [salt.state       :1813][INFO    ][14393] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-02-18 07:35:45,553 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-02-18 07:35:45,554 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 07:35:45.554281 duration_in_ms=204.202
2019-02-18 07:35:45,554 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 07:35:45.554686
2019-02-18 07:35:45,555 [salt.state       :1813][INFO    ][14393] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-02-18 07:35:45,555 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-02-18 07:35:45,556 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 07:35:45.556028 duration_in_ms=1.342
2019-02-18 07:35:45,556 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 07:35:45.556381
2019-02-18 07:35:45,556 [salt.state       :1813][INFO    ][14393] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-02-18 07:35:45,557 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-02-18 07:35:45,557 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 07:35:45.557554 duration_in_ms=1.173
2019-02-18 07:35:45,558 [salt.state       :1780][INFO    ][14393] Running state [a2enmod mpm_prefork] at time 07:35:45.558476
2019-02-18 07:35:45,558 [salt.state       :1813][INFO    ][14393] Executing state cmd.run for [a2enmod mpm_prefork]
2019-02-18 07:35:45,559 [salt.state       :300 ][INFO    ][14393] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-02-18 07:35:45,559 [salt.state       :1951][INFO    ][14393] Completed state [a2enmod mpm_prefork] at time 07:35:45.559649 duration_in_ms=1.173
2019-02-18 07:35:45,560 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 07:35:45.560030
2019-02-18 07:35:45,560 [salt.state       :1813][INFO    ][14393] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-02-18 07:35:45,560 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-02-18 07:35:45,561 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 07:35:45.561193 duration_in_ms=1.162
2019-02-18 07:35:45,561 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 07:35:45.561575
2019-02-18 07:35:45,562 [salt.state       :1813][INFO    ][14393] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-02-18 07:35:45,562 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-02-18 07:35:45,562 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 07:35:45.562787 duration_in_ms=1.212
2019-02-18 07:35:45,563 [salt.state       :1780][INFO    ][14393] Running state [apache_server_service_task] at time 07:35:45.563653
2019-02-18 07:35:45,564 [salt.state       :1813][INFO    ][14393] Executing state test.show_notification for [apache_server_service_task]
2019-02-18 07:35:45,564 [salt.state       :300 ][INFO    ][14393] Running apache.server.service
2019-02-18 07:35:45,564 [salt.state       :1951][INFO    ][14393] Completed state [apache_server_service_task] at time 07:35:45.564789 duration_in_ms=1.136
2019-02-18 07:35:45,565 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/ports.conf] at time 07:35:45.565374
2019-02-18 07:35:45,565 [salt.state       :1813][INFO    ][14393] Executing state file.managed for [/etc/apache2/ports.conf]
2019-02-18 07:35:45,620 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/ports.conf is in the correct state
2019-02-18 07:35:45,621 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/ports.conf] at time 07:35:45.621020 duration_in_ms=55.646
2019-02-18 07:35:45,621 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/conf-available/security.conf] at time 07:35:45.621616
2019-02-18 07:35:45,622 [salt.state       :1813][INFO    ][14393] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-02-18 07:35:45,675 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/conf-available/security.conf is in the correct state
2019-02-18 07:35:45,676 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/conf-available/security.conf] at time 07:35:45.675969 duration_in_ms=54.353
2019-02-18 07:35:45,682 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 07:35:45.681960
2019-02-18 07:35:45,682 [salt.state       :1813][INFO    ][14393] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-02-18 07:35:45,682 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-02-18 07:35:45,683 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 07:35:45.683266 duration_in_ms=1.306
2019-02-18 07:35:45,683 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 07:35:45.683864
2019-02-18 07:35:45,684 [salt.state       :1813][INFO    ][14393] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-02-18 07:35:45,871 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-02-18 07:35:45,871 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 07:35:45.871822 duration_in_ms=187.958
2019-02-18 07:35:45,872 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 07:35:45.872478
2019-02-18 07:35:45,872 [salt.state       :1813][INFO    ][14393] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-02-18 07:35:46,062 [salt.state       :300 ][INFO    ][14393] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-02-18 07:35:46,062 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 07:35:46.062560 duration_in_ms=190.082
2019-02-18 07:35:46,064 [salt.state       :1780][INFO    ][14393] Running state [apache2] at time 07:35:46.064331
2019-02-18 07:35:46,064 [salt.state       :1813][INFO    ][14393] Executing state service.running for [apache2]
2019-02-18 07:35:46,065 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-02-18 07:35:46,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:35:46,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:35:46,118 [salt.state       :300 ][INFO    ][14393] The service apache2 is already running
2019-02-18 07:35:46,119 [salt.state       :1951][INFO    ][14393] Completed state [apache2] at time 07:35:46.119121 duration_in_ms=54.786
2019-02-18 07:35:46,120 [salt.state       :1780][INFO    ][14393] Running state [/etc/apache2/conf-enabled/security.conf] at time 07:35:46.120031
2019-02-18 07:35:46,120 [salt.state       :1813][INFO    ][14393] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-02-18 07:35:46,122 [salt.state       :300 ][INFO    ][14393] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-02-18 07:35:46,122 [salt.state       :1951][INFO    ][14393] Completed state [/etc/apache2/conf-enabled/security.conf] at time 07:35:46.122576 duration_in_ms=2.546
2019-02-18 07:35:46,123 [salt.state       :1780][INFO    ][14393] Running state [panko-api] at time 07:35:46.123371
2019-02-18 07:35:46,123 [salt.state       :1813][INFO    ][14393] Executing state pkg.installed for [panko-api]
2019-02-18 07:35:46,144 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2019-02-18 07:35:46,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 07:35:47,655 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:35:47,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2019-02-18 07:35:52,345 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218073552336701
2019-02-18 07:35:52,357 [salt.minion      :1432][INFO    ][15315] Starting a new job with PID 15315
2019-02-18 07:35:52,370 [salt.minion      :1711][INFO    ][15315] Returning information for job: 20190218073552336701
2019-02-18 07:35:52,787 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:35:52,832 [salt.state       :300 ][INFO    ][14393] Made the following changes:
'python3-dateutil' changed from 'absent' to '2.6.1-1~u16.04+mcp1'
'python-pankoclient' changed from 'absent' to '0.5.0-2~u16.04+mcp5'
'python3-editor' changed from 'absent' to '0.4-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'python-panko' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'libmatheval1' changed from 'absent' to '1.1.11+dfsg-2'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'panko-common' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python3-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'uwsgi-core' changed from 'absent' to '2.0.12-5ubuntu3.2'
'panko-api' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-oslo.reports' changed from 'absent' to '1.26.0-2~u16.04+mcp'
'python3-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python3-mako' changed from 'absent' to '1.0.3+ds1-1ubuntu1'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'uwsgi-plugin-python' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libjansson4' changed from 'absent' to '2.7-3ubuntu0.1'
'alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'q-text-as-data' changed from 'absent' to '1'

2019-02-18 07:35:52,859 [salt.state       :915 ][INFO    ][14393] Loading fresh modules for state activity
2019-02-18 07:35:52,902 [salt.state       :1951][INFO    ][14393] Completed state [panko-api] at time 07:35:52.902367 duration_in_ms=6778.995
2019-02-18 07:35:52,905 [salt.state       :1780][INFO    ][14393] Running state [panko_ssl_mysql] at time 07:35:52.905300
2019-02-18 07:35:52,905 [salt.state       :1813][INFO    ][14393] Executing state test.show_notification for [panko_ssl_mysql]
2019-02-18 07:35:52,906 [salt.state       :300 ][INFO    ][14393] Running panko._ssl.mysql
2019-02-18 07:35:52,906 [salt.state       :1951][INFO    ][14393] Completed state [panko_ssl_mysql] at time 07:35:52.906780 duration_in_ms=1.48
2019-02-18 07:35:52,909 [salt.state       :1780][INFO    ][14393] Running state [/etc/panko/panko.conf] at time 07:35:52.909901
2019-02-18 07:35:52,910 [salt.state       :1813][INFO    ][14393] Executing state file.managed for [/etc/panko/panko.conf]
2019-02-18 07:35:52,938 [salt.fileclient  :1219][INFO    ][14393] Fetching file from saltenv 'base', ** done ** 'panko/files/rocky/panko.conf.Debian'
2019-02-18 07:35:52,993 [salt.fileclient  :1219][INFO    ][14393] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2019-02-18 07:35:53,017 [salt.fileclient  :1219][INFO    ][14393] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2019-02-18 07:35:53,095 [salt.state       :300 ][INFO    ][14393] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,73 +159,77 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -248,50 +239,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -306,6 +311,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -321,6 +327,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -358,6 +365,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -371,36 +379,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -478,68 +456,115 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2019-02-18 07:35:53,103 [salt.state       :1951][INFO    ][14393] Completed state [/etc/panko/panko.conf] at time 07:35:53.103752 duration_in_ms=193.851
2019-02-18 07:35:53,104 [salt.state       :1780][INFO    ][14393] Running state [panko-dbsync] at time 07:35:53.104250
2019-02-18 07:35:53,104 [salt.state       :1813][INFO    ][14393] Executing state cmd.run for [panko-dbsync]
2019-02-18 07:35:53,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command 'panko-dbsync' in directory '/root'
2019-02-18 07:35:54,712 [salt.state       :300 ][INFO    ][14393] {'pid': 15362, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-02-18 07:35:54,713 [salt.state       :1951][INFO    ][14393] Completed state [panko-dbsync] at time 07:35:54.712993 duration_in_ms=1608.741
2019-02-18 07:35:54,718 [salt.state       :1780][INFO    ][14393] Running state [/usr/bin/panko-expirer --use-syslog] at time 07:35:54.718166
2019-02-18 07:35:54,718 [salt.state       :1813][INFO    ][14393] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2019-02-18 07:35:54,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command 'crontab -u panko -l' in directory '/root'
2019-02-18 07:35:54,734 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command 'crontab -u panko /tmp/__salt.tmp.cw3dCv' in directory '/root'
2019-02-18 07:35:54,748 [salt.state       :300 ][INFO    ][14393] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2019-02-18 07:35:54,749 [salt.state       :1951][INFO    ][14393] Completed state [/usr/bin/panko-expirer --use-syslog] at time 07:35:54.749494 duration_in_ms=31.325
2019-02-18 07:35:54,755 [salt.state       :1780][INFO    ][14393] Running state [wsgi_panko] at time 07:35:54.755359
2019-02-18 07:35:54,755 [salt.state       :1813][INFO    ][14393] Executing state apache_site.enabled for [wsgi_panko]
2019-02-18 07:35:54,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2019-02-18 07:35:54,800 [salt.state       :300 ][INFO    ][14393] {'new': 'wsgi_panko', 'old': None}
2019-02-18 07:35:54,801 [salt.state       :1951][INFO    ][14393] Completed state [wsgi_panko] at time 07:35:54.801277 duration_in_ms=45.916
2019-02-18 07:35:55,302 [salt.state       :1780][INFO    ][14393] Running state [apache2] at time 07:35:55.302763
2019-02-18 07:35:55,303 [salt.state       :1813][INFO    ][14393] Executing state service.running for [apache2]
2019-02-18 07:35:55,304 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:35:55,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:35:55,333 [salt.state       :300 ][INFO    ][14393] The service apache2 is already running
2019-02-18 07:35:55,334 [salt.state       :1951][INFO    ][14393] Completed state [apache2] at time 07:35:55.334320 duration_in_ms=31.555
2019-02-18 07:35:55,334 [salt.state       :1780][INFO    ][14393] Running state [apache2] at time 07:35:55.334780
2019-02-18 07:35:55,335 [salt.state       :1813][INFO    ][14393] Executing state service.mod_watch for [apache2]
2019-02-18 07:35:55,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:35:55,350 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14393] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-02-18 07:35:57,616 [salt.state       :300 ][INFO    ][14393] {'apache2': True}
2019-02-18 07:35:57,616 [salt.state       :1951][INFO    ][14393] Completed state [apache2] at time 07:35:57.616676 duration_in_ms=2281.895
2019-02-18 07:35:57,620 [salt.minion      :1711][INFO    ][14393] Returning information for job: 20190218073537277185
2019-02-18 07:36:30,545 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command test.ping with jid 20190218073630537772
2019-02-18 07:36:30,562 [salt.minion      :1432][INFO    ][15530] Starting a new job with PID 15530
2019-02-18 07:36:30,579 [salt.minion      :1711][INFO    ][15530] Returning information for job: 20190218073630537772
2019-02-18 07:36:30,727 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218073630712696
2019-02-18 07:36:30,742 [salt.minion      :1432][INFO    ][15535] Starting a new job with PID 15535
2019-02-18 07:36:31,567 [salt.state       :915 ][INFO    ][15535] Loading fresh modules for state activity
2019-02-18 07:36:31,617 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2019-02-18 07:36:31,646 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2019-02-18 07:36:31,782 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2019-02-18 07:36:31,826 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2019-02-18 07:36:31,877 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2019-02-18 07:36:33,703 [salt.state       :1780][INFO    ][15535] Running state [aodh-api] at time 07:36:33.703643
2019-02-18 07:36:33,704 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [aodh-api]
2019-02-18 07:36:33,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:36:34,010 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2019-02-18 07:36:34,073 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 07:36:35,520 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:36:35,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2019-02-18 07:36:45,811 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218073645801148
2019-02-18 07:36:45,821 [salt.minion      :1432][INFO    ][21169] Starting a new job with PID 21169
2019-02-18 07:36:45,836 [salt.minion      :1711][INFO    ][21169] Returning information for job: 20190218073645801148
2019-02-18 07:36:48,226 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:36:48,288 [salt.state       :300 ][INFO    ][15535] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'build-essential' changed from 'absent' to '12.1ubuntu2'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'aodh-common' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'make:any' changed from 'absent' to '1'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'python2.7-greenlet' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-aodh' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-142.168'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-oslo.messaging' changed from 'absent' to '8.1.0-1~u16.04+mcp1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'c++-compiler' changed from 'absent' to '1'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'libc-dev' changed from 'absent' to '1'
'python-oslo.service' changed from 'absent' to '1.31.7-1~u16.04+mcp4'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'linux-kernel-headers' changed from 'absent' to '1'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2019-02-18 07:36:48,328 [salt.state       :915 ][INFO    ][15535] Loading fresh modules for state activity
2019-02-18 07:36:48,605 [salt.state       :1951][INFO    ][15535] Completed state [aodh-api] at time 07:36:48.605130 duration_in_ms=14901.487
2019-02-18 07:36:48,612 [salt.state       :1780][INFO    ][15535] Running state [aodh-evaluator] at time 07:36:48.612216
2019-02-18 07:36:48,622 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [aodh-evaluator]
2019-02-18 07:36:49,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:36:49,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2019-02-18 07:36:53,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:36:53,487 [salt.state       :300 ][INFO    ][15535] Made the following changes:
'aodh-evaluator' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-02-18 07:36:53,564 [salt.state       :915 ][INFO    ][15535] Loading fresh modules for state activity
2019-02-18 07:36:53,613 [salt.state       :1951][INFO    ][15535] Completed state [aodh-evaluator] at time 07:36:53.613544 duration_in_ms=5001.327
2019-02-18 07:36:53,618 [salt.state       :1780][INFO    ][15535] Running state [aodh-notifier] at time 07:36:53.618517
2019-02-18 07:36:53,618 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [aodh-notifier]
2019-02-18 07:36:54,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:36:54,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2019-02-18 07:36:57,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:36:57,508 [salt.state       :300 ][INFO    ][15535] Made the following changes:
'aodh-notifier' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-02-18 07:36:57,532 [salt.state       :915 ][INFO    ][15535] Loading fresh modules for state activity
2019-02-18 07:36:57,574 [salt.state       :1951][INFO    ][15535] Completed state [aodh-notifier] at time 07:36:57.574276 duration_in_ms=3955.758
2019-02-18 07:36:57,587 [salt.state       :1780][INFO    ][15535] Running state [aodh-listener] at time 07:36:57.587060
2019-02-18 07:36:57,587 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [aodh-listener]
2019-02-18 07:36:58,379 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:36:58,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2019-02-18 07:37:00,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:37:00,881 [salt.state       :300 ][INFO    ][15535] Made the following changes:
'aodh-listener' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-02-18 07:37:00,906 [salt.state       :915 ][INFO    ][15535] Loading fresh modules for state activity
2019-02-18 07:37:00,938 [salt.state       :1951][INFO    ][15535] Completed state [aodh-listener] at time 07:37:00.938460 duration_in_ms=3351.399
2019-02-18 07:37:00,943 [salt.state       :1780][INFO    ][15535] Running state [python-aodhclient] at time 07:37:00.943430
2019-02-18 07:37:00,943 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [python-aodhclient]
2019-02-18 07:37:02,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:37:02,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2019-02-18 07:37:03,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:37:03,599 [salt.state       :300 ][INFO    ][15535] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp3'

2019-02-18 07:37:03,626 [salt.state       :915 ][INFO    ][15535] Loading fresh modules for state activity
2019-02-18 07:37:03,666 [salt.state       :1951][INFO    ][15535] Completed state [python-aodhclient] at time 07:37:03.666236 duration_in_ms=2722.805
2019-02-18 07:37:03,671 [salt.state       :1780][INFO    ][15535] Running state [aodh_ssl_mysql] at time 07:37:03.671840
2019-02-18 07:37:03,672 [salt.state       :1813][INFO    ][15535] Executing state test.show_notification for [aodh_ssl_mysql]
2019-02-18 07:37:03,672 [salt.state       :300 ][INFO    ][15535] Running aodh._ssl.mysql
2019-02-18 07:37:03,672 [salt.state       :1951][INFO    ][15535] Completed state [aodh_ssl_mysql] at time 07:37:03.672528 duration_in_ms=0.688
2019-02-18 07:37:03,672 [salt.state       :1780][INFO    ][15535] Running state [aodh_ssl_rabbitmq] at time 07:37:03.672865
2019-02-18 07:37:03,673 [salt.state       :1813][INFO    ][15535] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2019-02-18 07:37:03,673 [salt.state       :300 ][INFO    ][15535] Running aodh._ssl.rabbitmq
2019-02-18 07:37:03,673 [salt.state       :1951][INFO    ][15535] Completed state [aodh_ssl_rabbitmq] at time 07:37:03.673422 duration_in_ms=0.556
2019-02-18 07:37:03,675 [salt.state       :1780][INFO    ][15535] Running state [/etc/aodh/aodh.conf] at time 07:37:03.675576
2019-02-18 07:37:03,676 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/aodh/aodh.conf]
2019-02-18 07:37:03,705 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/aodh.conf.Debian'
2019-02-18 07:37:03,770 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2019-02-18 07:37:03,903 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2019-02-18 07:37:03,921 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2019-02-18 07:37:03,977 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2019-02-18 07:37:04,014 [salt.state       :300 ][INFO    ][15535] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,55 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +133,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +144,84 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+rpc_thread_pool_size = 5
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +232,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +368,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-rFNLA3/aodh-7.0.0/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +381,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +403,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +422,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +431,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,71 +443,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -532,32 +521,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -571,36 +567,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -615,6 +1125,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -630,6 +1141,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -667,6 +1179,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -680,36 +1193,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -787,862 +1270,112 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2019-02-18 07:37:04,023 [salt.state       :1951][INFO    ][15535] Completed state [/etc/aodh/aodh.conf] at time 07:37:04.023642 duration_in_ms=348.065
2019-02-18 07:37:04,028 [salt.state       :1780][INFO    ][15535] Running state [aodh-dbsync] at time 07:37:04.028068
2019-02-18 07:37:04,028 [salt.state       :1813][INFO    ][15535] Executing state cmd.run for [aodh-dbsync]
2019-02-18 07:37:04,039 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command 'aodh-dbsync' in directory '/root'
2019-02-18 07:37:06,111 [salt.state       :300 ][INFO    ][15535] {'pid': 22495, 'retcode': 0, 'stderr': '', 'stdout': '2019-02-18 07:37:05.855 22497 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2019-02-18 07:37:05.856 22497 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m'}
2019-02-18 07:37:06,111 [salt.state       :1951][INFO    ][15535] Completed state [aodh-dbsync] at time 07:37:06.111675 duration_in_ms=2083.605
2019-02-18 07:37:06,118 [salt.state       :1780][INFO    ][15535] Running state [apache2] at time 07:37:06.118204
2019-02-18 07:37:06,118 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [apache2]
2019-02-18 07:37:06,725 [salt.state       :300 ][INFO    ][15535] All specified packages are already installed
2019-02-18 07:37:06,726 [salt.state       :1951][INFO    ][15535] Completed state [apache2] at time 07:37:06.726435 duration_in_ms=608.231
2019-02-18 07:37:06,726 [salt.state       :1780][INFO    ][15535] Running state [openssl] at time 07:37:06.726847
2019-02-18 07:37:06,727 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [openssl]
2019-02-18 07:37:06,735 [salt.state       :300 ][INFO    ][15535] All specified packages are already installed
2019-02-18 07:37:06,735 [salt.state       :1951][INFO    ][15535] Completed state [openssl] at time 07:37:06.735320 duration_in_ms=8.473
2019-02-18 07:37:06,736 [salt.state       :1780][INFO    ][15535] Running state [a2enmod rewrite] at time 07:37:06.736049
2019-02-18 07:37:06,736 [salt.state       :1813][INFO    ][15535] Executing state cmd.run for [a2enmod rewrite]
2019-02-18 07:37:06,736 [salt.state       :300 ][INFO    ][15535] /etc/apache2/mods-enabled/rewrite.load exists
2019-02-18 07:37:06,737 [salt.state       :1951][INFO    ][15535] Completed state [a2enmod rewrite] at time 07:37:06.737101 duration_in_ms=1.052
2019-02-18 07:37:06,737 [salt.state       :1780][INFO    ][15535] Running state [libapache2-mod-wsgi] at time 07:37:06.737640
2019-02-18 07:37:06,737 [salt.state       :1813][INFO    ][15535] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-02-18 07:37:06,745 [salt.state       :300 ][INFO    ][15535] All specified packages are already installed
2019-02-18 07:37:06,745 [salt.state       :1951][INFO    ][15535] Completed state [libapache2-mod-wsgi] at time 07:37:06.745503 duration_in_ms=7.862
2019-02-18 07:37:06,746 [salt.state       :1780][INFO    ][15535] Running state [a2enmod wsgi] at time 07:37:06.746044
2019-02-18 07:37:06,746 [salt.state       :1813][INFO    ][15535] Executing state cmd.run for [a2enmod wsgi]
2019-02-18 07:37:06,746 [salt.state       :300 ][INFO    ][15535] /etc/apache2/mods-enabled/wsgi.load exists
2019-02-18 07:37:06,747 [salt.state       :1951][INFO    ][15535] Completed state [a2enmod wsgi] at time 07:37:06.746976 duration_in_ms=0.931
2019-02-18 07:37:06,749 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 07:37:06.749168
2019-02-18 07:37:06,749 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-02-18 07:37:06,807 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-02-18 07:37:06,808 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 07:37:06.808056 duration_in_ms=58.888
2019-02-18 07:37:06,808 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 07:37:06.808355
2019-02-18 07:37:06,808 [salt.state       :1813][INFO    ][15535] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-02-18 07:37:06,809 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-02-18 07:37:06,809 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 07:37:06.809360 duration_in_ms=1.005
2019-02-18 07:37:06,809 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 07:37:06.809646
2019-02-18 07:37:06,809 [salt.state       :1813][INFO    ][15535] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-02-18 07:37:06,810 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-02-18 07:37:06,810 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 07:37:06.810543 duration_in_ms=0.897
2019-02-18 07:37:06,811 [salt.state       :1780][INFO    ][15535] Running state [a2enmod mpm_prefork] at time 07:37:06.811375
2019-02-18 07:37:06,811 [salt.state       :1813][INFO    ][15535] Executing state cmd.run for [a2enmod mpm_prefork]
2019-02-18 07:37:06,812 [salt.state       :300 ][INFO    ][15535] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-02-18 07:37:06,812 [salt.state       :1951][INFO    ][15535] Completed state [a2enmod mpm_prefork] at time 07:37:06.812321 duration_in_ms=0.946
2019-02-18 07:37:06,812 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 07:37:06.812621
2019-02-18 07:37:06,812 [salt.state       :1813][INFO    ][15535] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-02-18 07:37:06,813 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-02-18 07:37:06,813 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 07:37:06.813497 duration_in_ms=0.876
2019-02-18 07:37:06,813 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 07:37:06.813778
2019-02-18 07:37:06,814 [salt.state       :1813][INFO    ][15535] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-02-18 07:37:06,814 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-02-18 07:37:06,814 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 07:37:06.814673 duration_in_ms=0.895
2019-02-18 07:37:06,814 [salt.state       :1780][INFO    ][15535] Running state [apache_server_service_task] at time 07:37:06.814963
2019-02-18 07:37:06,815 [salt.state       :1813][INFO    ][15535] Executing state test.show_notification for [apache_server_service_task]
2019-02-18 07:37:06,815 [salt.state       :300 ][INFO    ][15535] Running apache.server.service
2019-02-18 07:37:06,815 [salt.state       :1951][INFO    ][15535] Completed state [apache_server_service_task] at time 07:37:06.815819 duration_in_ms=0.856
2019-02-18 07:37:06,816 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/ports.conf] at time 07:37:06.816330
2019-02-18 07:37:06,816 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/apache2/ports.conf]
2019-02-18 07:37:06,875 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/ports.conf is in the correct state
2019-02-18 07:37:06,875 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/ports.conf] at time 07:37:06.875646 duration_in_ms=59.316
2019-02-18 07:37:06,876 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/conf-available/security.conf] at time 07:37:06.876169
2019-02-18 07:37:06,876 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-02-18 07:37:06,931 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/conf-available/security.conf is in the correct state
2019-02-18 07:37:06,931 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/conf-available/security.conf] at time 07:37:06.931590 duration_in_ms=55.421
2019-02-18 07:37:06,938 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 07:37:06.938204
2019-02-18 07:37:06,938 [salt.state       :1813][INFO    ][15535] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-02-18 07:37:06,938 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-02-18 07:37:06,939 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 07:37:06.939123 duration_in_ms=0.918
2019-02-18 07:37:06,939 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 07:37:06.939683
2019-02-18 07:37:06,939 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-02-18 07:37:07,125 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-02-18 07:37:07,126 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 07:37:07.126065 duration_in_ms=186.382
2019-02-18 07:37:07,126 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 07:37:07.126533
2019-02-18 07:37:07,126 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-02-18 07:37:07,305 [salt.state       :300 ][INFO    ][15535] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-02-18 07:37:07,305 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 07:37:07.305371 duration_in_ms=178.837
2019-02-18 07:37:07,307 [salt.state       :1780][INFO    ][15535] Running state [apache2] at time 07:37:07.307434
2019-02-18 07:37:07,307 [salt.state       :1813][INFO    ][15535] Executing state service.running for [apache2]
2019-02-18 07:37:07,308 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-02-18 07:37:07,326 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:37:07,339 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:37:07,356 [salt.state       :300 ][INFO    ][15535] The service apache2 is already running
2019-02-18 07:37:07,357 [salt.state       :1951][INFO    ][15535] Completed state [apache2] at time 07:37:07.357042 duration_in_ms=49.604
2019-02-18 07:37:07,358 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/conf-enabled/security.conf] at time 07:37:07.358405
2019-02-18 07:37:07,358 [salt.state       :1813][INFO    ][15535] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-02-18 07:37:07,361 [salt.state       :300 ][INFO    ][15535] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-02-18 07:37:07,361 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/conf-enabled/security.conf] at time 07:37:07.361489 duration_in_ms=3.084
2019-02-18 07:37:07,362 [salt.state       :1780][INFO    ][15535] Running state [/etc/default/aodh-evaluator] at time 07:37:07.362199
2019-02-18 07:37:07,362 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/default/aodh-evaluator]
2019-02-18 07:37:07,381 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2019-02-18 07:37:07,392 [salt.state       :300 ][INFO    ][15535] File changed:
New file
2019-02-18 07:37:07,392 [salt.state       :1951][INFO    ][15535] Completed state [/etc/default/aodh-evaluator] at time 07:37:07.392746 duration_in_ms=30.547
2019-02-18 07:37:07,393 [salt.state       :1780][INFO    ][15535] Running state [/etc/default/aodh-notifier] at time 07:37:07.393368
2019-02-18 07:37:07,393 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/default/aodh-notifier]
2019-02-18 07:37:07,414 [salt.state       :300 ][INFO    ][15535] File changed:
New file
2019-02-18 07:37:07,414 [salt.state       :1951][INFO    ][15535] Completed state [/etc/default/aodh-notifier] at time 07:37:07.414669 duration_in_ms=21.301
2019-02-18 07:37:07,415 [salt.state       :1780][INFO    ][15535] Running state [/etc/default/aodh-listener] at time 07:37:07.415252
2019-02-18 07:37:07,415 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/default/aodh-listener]
2019-02-18 07:37:07,434 [salt.state       :300 ][INFO    ][15535] File changed:
New file
2019-02-18 07:37:07,435 [salt.state       :1951][INFO    ][15535] Completed state [/etc/default/aodh-listener] at time 07:37:07.435004 duration_in_ms=19.752
2019-02-18 07:37:07,437 [salt.state       :1780][INFO    ][15535] Running state [/usr/bin/aodh-expirer] at time 07:37:07.437369
2019-02-18 07:37:07,437 [salt.state       :1813][INFO    ][15535] Executing state cron.present for [/usr/bin/aodh-expirer]
2019-02-18 07:37:07,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command 'crontab -u aodh -l' in directory '/root'
2019-02-18 07:37:07,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command 'crontab -u aodh /tmp/__salt.tmp.DXWQQv' in directory '/root'
2019-02-18 07:37:07,465 [salt.state       :300 ][INFO    ][15535] {'aodh': '/usr/bin/aodh-expirer'}
2019-02-18 07:37:07,466 [salt.state       :1951][INFO    ][15535] Completed state [/usr/bin/aodh-expirer] at time 07:37:07.465914 duration_in_ms=28.544
2019-02-18 07:37:07,466 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 07:37:07.466877
2019-02-18 07:37:07,467 [salt.state       :1813][INFO    ][15535] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2019-02-18 07:37:07,490 [salt.fileclient  :1219][INFO    ][15535] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/apache-aodh.apache2.conf.Debian'
2019-02-18 07:37:07,525 [salt.state       :300 ][INFO    ][15535] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2019-02-18 07:37:07,525 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 07:37:07.525744 duration_in_ms=58.867
2019-02-18 07:37:07,526 [salt.state       :1780][INFO    ][15535] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 07:37:07.526281
2019-02-18 07:37:07,526 [salt.state       :1813][INFO    ][15535] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2019-02-18 07:37:07,528 [salt.state       :300 ][INFO    ][15535] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2019-02-18 07:37:07,528 [salt.state       :1951][INFO    ][15535] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 07:37:07.528478 duration_in_ms=2.196
2019-02-18 07:37:07,529 [salt.state       :1780][INFO    ][15535] Running state [apache2] at time 07:37:07.529408
2019-02-18 07:37:07,529 [salt.state       :1813][INFO    ][15535] Executing state service.running for [apache2]
2019-02-18 07:37:07,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:37:07,545 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-18 07:37:07,560 [salt.state       :300 ][INFO    ][15535] The service apache2 is already running
2019-02-18 07:37:07,560 [salt.state       :1951][INFO    ][15535] Completed state [apache2] at time 07:37:07.560697 duration_in_ms=31.287
2019-02-18 07:37:07,561 [salt.state       :1780][INFO    ][15535] Running state [apache2] at time 07:37:07.561106
2019-02-18 07:37:07,561 [salt.state       :1813][INFO    ][15535] Executing state service.mod_watch for [apache2]
2019-02-18 07:37:07,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-18 07:37:07,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-02-18 07:37:09,823 [salt.state       :300 ][INFO    ][15535] {'apache2': True}
2019-02-18 07:37:09,823 [salt.state       :1951][INFO    ][15535] Completed state [apache2] at time 07:37:09.823542 duration_in_ms=2262.435
2019-02-18 07:37:09,825 [salt.state       :1780][INFO    ][15535] Running state [aodh-evaluator] at time 07:37:09.825778
2019-02-18 07:37:09,829 [salt.state       :1813][INFO    ][15535] Executing state service.running for [aodh-evaluator]
2019-02-18 07:37:09,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2019-02-18 07:37:09,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-02-18 07:37:09,862 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2019-02-18 07:37:09,875 [salt.state       :300 ][INFO    ][15535] The service aodh-evaluator is already running
2019-02-18 07:37:09,875 [salt.state       :1951][INFO    ][15535] Completed state [aodh-evaluator] at time 07:37:09.875618 duration_in_ms=49.838
2019-02-18 07:37:09,875 [salt.state       :1780][INFO    ][15535] Running state [aodh-evaluator] at time 07:37:09.875878
2019-02-18 07:37:09,876 [salt.state       :1813][INFO    ][15535] Executing state service.mod_watch for [aodh-evaluator]
2019-02-18 07:37:09,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-02-18 07:37:09,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2019-02-18 07:37:10,017 [salt.state       :300 ][INFO    ][15535] {'aodh-evaluator': True}
2019-02-18 07:37:10,017 [salt.state       :1951][INFO    ][15535] Completed state [aodh-evaluator] at time 07:37:10.017439 duration_in_ms=141.558
2019-02-18 07:37:10,019 [salt.state       :1780][INFO    ][15535] Running state [aodh-notifier] at time 07:37:10.019054
2019-02-18 07:37:10,019 [salt.state       :1813][INFO    ][15535] Executing state service.running for [aodh-notifier]
2019-02-18 07:37:10,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2019-02-18 07:37:10,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-02-18 07:37:10,073 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2019-02-18 07:37:10,090 [salt.state       :300 ][INFO    ][15535] The service aodh-notifier is already running
2019-02-18 07:37:10,091 [salt.state       :1951][INFO    ][15535] Completed state [aodh-notifier] at time 07:37:10.091165 duration_in_ms=72.107
2019-02-18 07:37:10,091 [salt.state       :1780][INFO    ][15535] Running state [aodh-notifier] at time 07:37:10.091445
2019-02-18 07:37:10,091 [salt.state       :1813][INFO    ][15535] Executing state service.mod_watch for [aodh-notifier]
2019-02-18 07:37:10,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-02-18 07:37:10,116 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2019-02-18 07:37:15,898 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218073715890353
2019-02-18 07:37:15,910 [salt.minion      :1432][INFO    ][22784] Starting a new job with PID 22784
2019-02-18 07:37:15,923 [salt.minion      :1711][INFO    ][22784] Returning information for job: 20190218073715890353
2019-02-18 07:37:25,388 [salt.state       :300 ][INFO    ][15535] {'aodh-notifier': True}
2019-02-18 07:37:25,389 [salt.state       :1951][INFO    ][15535] Completed state [aodh-notifier] at time 07:37:25.389366 duration_in_ms=15297.916
2019-02-18 07:37:25,391 [salt.state       :1780][INFO    ][15535] Running state [aodh-listener] at time 07:37:25.391029
2019-02-18 07:37:25,391 [salt.state       :1813][INFO    ][15535] Executing state service.running for [aodh-listener]
2019-02-18 07:37:25,392 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2019-02-18 07:37:25,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-02-18 07:37:25,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2019-02-18 07:37:25,446 [salt.state       :300 ][INFO    ][15535] The service aodh-listener is already running
2019-02-18 07:37:25,447 [salt.state       :1951][INFO    ][15535] Completed state [aodh-listener] at time 07:37:25.447122 duration_in_ms=56.09
2019-02-18 07:37:25,447 [salt.state       :1780][INFO    ][15535] Running state [aodh-listener] at time 07:37:25.447484
2019-02-18 07:37:25,447 [salt.state       :1813][INFO    ][15535] Executing state service.mod_watch for [aodh-listener]
2019-02-18 07:37:25,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-02-18 07:37:25,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15535] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2019-02-18 07:37:40,638 [salt.state       :300 ][INFO    ][15535] {'aodh-listener': True}
2019-02-18 07:37:40,639 [salt.state       :1951][INFO    ][15535] Completed state [aodh-listener] at time 07:37:40.639121 duration_in_ms=15191.633
2019-02-18 07:37:40,651 [salt.minion      :1711][INFO    ][15535] Returning information for job: 20190218073630712696
2019-02-18 07:40:08,877 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command state.sls with jid 20190218074008868662
2019-02-18 07:40:08,888 [salt.minion      :1432][INFO    ][22902] Starting a new job with PID 22902
2019-02-18 07:40:14,587 [salt.state       :915 ][INFO    ][22902] Loading fresh modules for state activity
2019-02-18 07:40:14,636 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2019-02-18 07:40:14,660 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2019-02-18 07:40:14,800 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2019-02-18 07:40:16,368 [salt.state       :1780][INFO    ][22902] Running state [ceilometer-agent-central] at time 07:40:16.368748
2019-02-18 07:40:16,369 [salt.state       :1813][INFO    ][22902] Executing state pkg.installed for [ceilometer-agent-central]
2019-02-18 07:40:16,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:40:16,735 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2019-02-18 07:40:16,797 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-18 07:40:18,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:40:18,279 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2019-02-18 07:40:23,934 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command saltutil.find_job with jid 20190218074023921556
2019-02-18 07:40:23,947 [salt.minion      :1432][INFO    ][23673] Starting a new job with PID 23673
2019-02-18 07:40:23,964 [salt.minion      :1711][INFO    ][23673] Returning information for job: 20190218074023921556
2019-02-18 07:40:34,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:40:35,033 [salt.state       :300 ][INFO    ][22902] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-pysmi' changed from 'absent' to '0.2.2-2~u16.04+mcp'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.4'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2ubuntu0.16.04.1'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.4.3-1~u16.04+mcp'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-oslo-rootwrap' changed from 'absent' to '1'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'python-ceilometer' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-pycryptodome' changed from 'absent' to '3.4.7-1.1~u16.04+mcp'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2019-02-18 07:40:35,065 [salt.state       :915 ][INFO    ][22902] Loading fresh modules for state activity
2019-02-18 07:40:35,246 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer-agent-central] at time 07:40:35.246336 duration_in_ms=18877.588
2019-02-18 07:40:35,251 [salt.state       :1780][INFO    ][22902] Running state [python-ceilometerclient] at time 07:40:35.251740
2019-02-18 07:40:35,252 [salt.state       :1813][INFO    ][22902] Executing state pkg.installed for [python-ceilometerclient]
2019-02-18 07:40:35,923 [salt.state       :300 ][INFO    ][22902] All specified packages are already installed
2019-02-18 07:40:35,923 [salt.state       :1951][INFO    ][22902] Completed state [python-ceilometerclient] at time 07:40:35.923802 duration_in_ms=672.061
2019-02-18 07:40:35,924 [salt.state       :1780][INFO    ][22902] Running state [ceilometer-agent-notification] at time 07:40:35.924269
2019-02-18 07:40:35,924 [salt.state       :1813][INFO    ][22902] Executing state pkg.installed for [ceilometer-agent-notification]
2019-02-18 07:40:35,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-18 07:40:35,974 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2019-02-18 07:40:38,850 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-18 07:40:38,986 [salt.state       :300 ][INFO    ][22902] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'

2019-02-18 07:40:39,014 [salt.state       :915 ][INFO    ][22902] Loading fresh modules for state activity
2019-02-18 07:40:39,055 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer-agent-notification] at time 07:40:39.055225 duration_in_ms=3130.955
2019-02-18 07:40:39,058 [salt.state       :1780][INFO    ][22902] Running state [ceilometer_ssl_rabbitmq] at time 07:40:39.058246
2019-02-18 07:40:39,058 [salt.state       :1813][INFO    ][22902] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2019-02-18 07:40:39,059 [salt.state       :300 ][INFO    ][22902] Running ceilometer._ssl.rabbitmq
2019-02-18 07:40:39,059 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer_ssl_rabbitmq] at time 07:40:39.059285 duration_in_ms=1.039
2019-02-18 07:40:39,061 [salt.state       :1780][INFO    ][22902] Running state [/etc/ceilometer/ceilometer.conf] at time 07:40:39.061763
2019-02-18 07:40:39,062 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2019-02-18 07:40:39,098 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/ceilometer-server.conf.Debian'
2019-02-18 07:40:39,386 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2019-02-18 07:40:39,508 [salt.state       :300 ][INFO    ][22902] File changed:
--- 
+++ 
@@ -1,15 +1,330 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: To reduce polling agent load, samples are sent to the
-# notification agent in a batch. To gain higher throughput at the cost of load
-# set this to False. This option is deprecated, to disable batching set
-# batch_size = 0 in the polling group. (boolean value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
 #batch_polled_samples = true
 
 # Inspector to use for inspecting the hypervisor layer. Known inspectors are
@@ -70,372 +385,6 @@
 # Minimum value: 1
 #max_parallel_requests = 64
 
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
 
 [coordination]
 
@@ -448,6 +397,7 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
@@ -529,52 +479,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -593,7 +497,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-yNzi7g/ceilometer-11.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -619,6 +523,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -636,6 +541,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -666,633 +572,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1307,10 +586,6 @@
 # pool with the same partitioning_group_prefix a disjoint subset of pollsters
 # should be loaded. (string value)
 #partitioning_group_prefix = <None>
-
-# Batch size of samples to send to notification agent, Set to 0 to disable
-# (integer value)
-#batch_size = 50
 
 
 [publisher]
@@ -1325,6 +600,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1357,87 +633,115 @@
 #secret_key = <None>
 
 
-[rgw_client]
-
-#
-# From ceilometer
-#
-
-# Whether RGW uses implicit tenants or not. (boolean value)
-#implicit_tenants = false
-
-
 [service_credentials]
 
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1450,7 +754,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1485,58 +789,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (host address value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25

2019-02-18 07:40:39,512 [salt.state       :1951][INFO    ][22902] Completed state [/etc/ceilometer/ceilometer.conf] at time 07:40:39.512692 duration_in_ms=450.928
2019-02-18 07:40:39,513 [salt.state       :1780][INFO    ][22902] Running state [/etc/default/ceilometer-agent-central] at time 07:40:39.513378
2019-02-18 07:40:39,513 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2019-02-18 07:40:39,549 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2019-02-18 07:40:39,593 [salt.state       :300 ][INFO    ][22902] File changed:
New file
2019-02-18 07:40:39,593 [salt.state       :1951][INFO    ][22902] Completed state [/etc/default/ceilometer-agent-central] at time 07:40:39.593417 duration_in_ms=80.039
2019-02-18 07:40:39,593 [salt.state       :1780][INFO    ][22902] Running state [/etc/default/ceilometer-agent-notification] at time 07:40:39.593791
2019-02-18 07:40:39,602 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2019-02-18 07:40:39,694 [salt.state       :300 ][INFO    ][22902] File changed:
New file
2019-02-18 07:40:39,694 [salt.state       :1951][INFO    ][22902] Completed state [/etc/default/ceilometer-agent-notification] at time 07:40:39.694722 duration_in_ms=100.931
2019-02-18 07:40:39,697 [salt.state       :1780][INFO    ][22902] Running state [python-gnocchiclient] at time 07:40:39.697836
2019-02-18 07:40:39,711 [salt.state       :1813][INFO    ][22902] Executing state pkg.latest for [python-gnocchiclient]
2019-02-18 07:40:39,748 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2019-02-18 07:40:39,929 [salt.state       :300 ][INFO    ][22902] Package python-gnocchiclient is already up-to-date
2019-02-18 07:40:39,929 [salt.state       :1951][INFO    ][22902] Completed state [python-gnocchiclient] at time 07:40:39.929485 duration_in_ms=231.648
2019-02-18 07:40:39,930 [salt.state       :1780][INFO    ][22902] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 07:40:39.930463
2019-02-18 07:40:39,930 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2019-02-18 07:40:39,958 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gnocchi_resources.yaml'
2019-02-18 07:40:39,981 [salt.state       :300 ][INFO    ][22902] File changed:
New file
2019-02-18 07:40:39,981 [salt.state       :1951][INFO    ][22902] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 07:40:39.981864 duration_in_ms=51.4
2019-02-18 07:40:39,983 [salt.state       :1780][INFO    ][22902] Running state [ceilometer-upgrade] at time 07:40:39.983611
2019-02-18 07:40:39,985 [salt.state       :1813][INFO    ][22902] Executing state cmd.run for [ceilometer-upgrade]
2019-02-18 07:40:39,986 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command 'ceilometer-upgrade' in directory '/root'
2019-02-18 07:40:50,278 [salt.state       :300 ][INFO    ][22902] {'pid': 25761, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-02-18 07:40:50,279 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer-upgrade] at time 07:40:50.279421 duration_in_ms=10295.809
2019-02-18 07:40:50,280 [salt.state       :1780][INFO    ][22902] Running state [/etc/ceilometer/pipeline.yaml] at time 07:40:50.280247
2019-02-18 07:40:50,280 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2019-02-18 07:40:50,303 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/pipeline.yaml'
2019-02-18 07:40:50,371 [salt.state       :300 ][INFO    ][22902] File changed:
New file
2019-02-18 07:40:50,371 [salt.state       :1951][INFO    ][22902] Completed state [/etc/ceilometer/pipeline.yaml] at time 07:40:50.371801 duration_in_ms=91.554
2019-02-18 07:40:50,372 [salt.state       :1780][INFO    ][22902] Running state [/etc/ceilometer/event_pipeline.yaml] at time 07:40:50.372279
2019-02-18 07:40:50,372 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2019-02-18 07:40:50,394 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_pipeline.yaml'
2019-02-18 07:40:50,451 [salt.state       :300 ][INFO    ][22902] File changed:
New file
2019-02-18 07:40:50,451 [salt.state       :1951][INFO    ][22902] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 07:40:50.451532 duration_in_ms=79.252
2019-02-18 07:40:50,452 [salt.state       :1780][INFO    ][22902] Running state [/etc/ceilometer/event_definitions.yaml] at time 07:40:50.452019
2019-02-18 07:40:50,452 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2019-02-18 07:40:50,474 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_definitions.yaml'
2019-02-18 07:40:50,486 [salt.state       :300 ][INFO    ][22902] File changed:
New file
2019-02-18 07:40:50,486 [salt.state       :1951][INFO    ][22902] Completed state [/etc/ceilometer/event_definitions.yaml] at time 07:40:50.486932 duration_in_ms=34.913
2019-02-18 07:40:50,487 [salt.state       :1780][INFO    ][22902] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 07:40:50.487375
2019-02-18 07:40:50,487 [salt.state       :1813][INFO    ][22902] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2019-02-18 07:40:50,506 [salt.fileclient  :1219][INFO    ][22902] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gabbi_pipeline.yaml'
2019-02-18 07:40:50,514 [salt.state       :300 ][INFO    ][22902] File changed:
New file
2019-02-18 07:40:50,514 [salt.state       :1951][INFO    ][22902] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 07:40:50.514805 duration_in_ms=27.429
2019-02-18 07:40:51,051 [salt.state       :1780][INFO    ][22902] Running state [ceilometer-agent-central] at time 07:40:51.051082
2019-02-18 07:40:51,051 [salt.state       :1813][INFO    ][22902] Executing state service.running for [ceilometer-agent-central]
2019-02-18 07:40:51,052 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2019-02-18 07:40:51,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-18 07:40:51,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-18 07:40:51,098 [salt.state       :300 ][INFO    ][22902] The service ceilometer-agent-central is already running
2019-02-18 07:40:51,099 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer-agent-central] at time 07:40:51.099083 duration_in_ms=48.0
2019-02-18 07:40:51,099 [salt.state       :1780][INFO    ][22902] Running state [ceilometer-agent-central] at time 07:40:51.099562
2019-02-18 07:40:51,100 [salt.state       :1813][INFO    ][22902] Executing state service.mod_watch for [ceilometer-agent-central]
2019-02-18 07:40:51,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-18 07:40:51,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-18 07:40:51,290 [salt.state       :300 ][INFO    ][22902] {'ceilometer-agent-central': True}
2019-02-18 07:40:51,291 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer-agent-central] at time 07:40:51.291270 duration_in_ms=191.707
2019-02-18 07:40:51,292 [salt.state       :1780][INFO    ][22902] Running state [ceilometer-agent-notification] at time 07:40:51.292395
2019-02-18 07:40:51,292 [salt.state       :1813][INFO    ][22902] Executing state service.running for [ceilometer-agent-notification]
2019-02-18 07:40:51,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2019-02-18 07:40:51,320 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-18 07:40:51,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-18 07:40:51,352 [salt.state       :300 ][INFO    ][22902] The service ceilometer-agent-notification is already running
2019-02-18 07:40:51,353 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer-agent-notification] at time 07:40:51.353064 duration_in_ms=60.667
2019-02-18 07:40:51,353 [salt.state       :1780][INFO    ][22902] Running state [ceilometer-agent-notification] at time 07:40:51.353529
2019-02-18 07:40:51,354 [salt.state       :1813][INFO    ][22902] Executing state service.mod_watch for [ceilometer-agent-notification]
2019-02-18 07:40:51,355 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-18 07:40:51,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22902] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-18 07:40:51,489 [salt.state       :300 ][INFO    ][22902] {'ceilometer-agent-notification': True}
2019-02-18 07:40:51,498 [salt.state       :1951][INFO    ][22902] Completed state [ceilometer-agent-notification] at time 07:40:51.498040 duration_in_ms=144.509
2019-02-18 07:40:51,500 [salt.minion      :1711][INFO    ][22902] Returning information for job: 20190218074008868662
2019-02-18 07:44:37,641 [salt.minion      :1308][INFO    ][1557] User sudo_ubuntu Executing command cp.push_dir with jid 20190218074437631534
2019-02-18 07:44:37,654 [salt.minion      :1432][INFO    ][25918] Starting a new job with PID 25918
