2019-02-05 17:07:00,855 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:00,973 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:00,976 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:00,980 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:00,983 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,275 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,278 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,281 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,342 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,346 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,349 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,353 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,458 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,492 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,498 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,502 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,505 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,510 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,513 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,517 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,522 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,525 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,529 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,533 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,537 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,541 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,545 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,549 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,552 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,557 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,561 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,564 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,569 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,573 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,577 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,581 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,585 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,589 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,594 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,598 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,601 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,606 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,610 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,614 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,620 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,625 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,629 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,633 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,636 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,641 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,644 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,648 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,652 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,655 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,659 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,662 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:01,666 [salt.utils.decorators:82  ][ERROR   ][1753] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:07:10,963 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][1753] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:07:10,964 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][1753] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Hit:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Get:4 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease [2821 B]
Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:6 http://archive.ubuntu.com/ubuntu xenial/main Sources [868 kB]
Get:7 http://archive.ubuntu.com/ubuntu xenial/restricted Sources [4808 B]
Get:8 http://security.ubuntu.com/ubuntu xenial-security/main Sources [142 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial/universe Sources [7728 kB]
Get:10 http://security.ubuntu.com/ubuntu xenial-security/restricted Sources [2116 B]
Get:11 http://security.ubuntu.com/ubuntu xenial-security/universe Sources [97.3 kB]
Get:12 http://security.ubuntu.com/ubuntu xenial-security/multiverse Sources [3416 B]
Get:13 http://archive.ubuntu.com/ubuntu xenial/multiverse Sources [179 kB]
Ign:14 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:15 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:16 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:17 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:18 http://archive.ubuntu.com/ubuntu xenial-backports/main Sources [4848 B]
Get:19 http://archive.ubuntu.com/ubuntu xenial-backports/universe Sources [6740 B]
Get:14 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:14 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 9732 kB in 1s (5179 kB/s)
Reading package lists...
2019-02-05 17:07:10,965 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][1753] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:07:10,966 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][1753] retcode: 100
2019-02-05 17:07:10,967 [salt.state       :302 ][ERROR   ][1753] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:07:15,484 [salt.state       :302 ][ERROR   ][1753] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:07:15,491 [salt.state       :302 ][ERROR   ][1753] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:07:15,497 [salt.state       :302 ][ERROR   ][1753] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:08:05,436 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,498 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,502 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,505 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,508 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,665 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,669 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,672 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,743 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,746 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,749 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,753 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,808 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,829 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,832 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,837 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,841 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,844 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,849 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,852 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,856 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,860 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,864 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,867 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,871 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,875 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,879 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,883 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,886 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,890 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,894 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,898 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,901 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,906 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,911 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,914 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,918 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,922 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,926 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,929 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,934 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,938 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,941 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,945 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,949 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,953 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,958 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,962 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,966 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,972 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,976 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,981 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,984 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,988 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,992 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:05,996 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:06,000 [salt.utils.decorators:82  ][ERROR   ][2745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:11,472 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][2745] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:08:11,473 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][2745] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Get:3 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease [2821 B]
Hit:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 441 kB in 0s (711 kB/s)
Reading package lists...
2019-02-05 17:08:11,473 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][2745] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:08:11,473 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][2745] retcode: 100
2019-02-05 17:08:11,475 [salt.state       :302 ][ERROR   ][2745] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:08:11,925 [salt.state       :302 ][ERROR   ][2745] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:08:11,931 [salt.state       :302 ][ERROR   ][2745] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:08:11,937 [salt.state       :302 ][ERROR   ][2745] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:08:44,051 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,114 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,117 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,120 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,122 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,282 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,285 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,288 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,361 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,364 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,368 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,371 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,430 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,451 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,455 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,458 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,462 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,465 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,469 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,472 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,476 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,479 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,483 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,487 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,491 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,494 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,498 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,502 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,505 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,509 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,513 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,517 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,520 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,524 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,527 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,531 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,535 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,539 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,542 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,547 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,550 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,554 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,558 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,562 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,565 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,569 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,572 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,576 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,580 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,584 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,588 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,592 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,596 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,600 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,603 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,607 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:44,610 [salt.utils.decorators:82  ][ERROR   ][3192] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:08:49,775 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3192] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:08:49,777 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][3192] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Hit:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Get:4 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease [2821 B]
Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 441 kB in 0s (915 kB/s)
Reading package lists...
2019-02-05 17:08:49,780 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3192] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:08:49,781 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3192] retcode: 100
2019-02-05 17:08:49,782 [salt.state       :302 ][ERROR   ][3192] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:08:50,247 [salt.state       :302 ][ERROR   ][3192] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:08:50,253 [salt.state       :302 ][ERROR   ][3192] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:08:50,259 [salt.state       :302 ][ERROR   ][3192] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:09:22,773 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:22,836 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:22,839 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:22,842 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:22,845 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,015 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,018 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,022 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,115 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,120 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,123 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,126 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,191 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,212 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,216 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,220 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,224 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,228 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,232 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,235 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,239 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,243 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,246 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,250 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,254 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,257 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,261 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,265 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,268 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,272 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,275 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,279 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,282 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,286 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,290 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,294 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,298 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,302 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,306 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,310 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,313 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,317 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,321 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,326 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,330 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,335 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,339 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,342 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,347 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,352 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,358 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,362 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,366 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,370 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,374 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,377 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:23,381 [salt.utils.decorators:82  ][ERROR   ][3640] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:09:28,564 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3640] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:09:28,564 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][3640] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Hit:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Hit:4 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease
Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 439 kB in 0s (818 kB/s)
Reading package lists...
2019-02-05 17:09:28,565 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3640] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:09:28,565 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3640] retcode: 100
2019-02-05 17:09:28,566 [salt.state       :302 ][ERROR   ][3640] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:09:29,012 [salt.state       :302 ][ERROR   ][3640] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:09:29,018 [salt.state       :302 ][ERROR   ][3640] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:09:29,024 [salt.state       :302 ][ERROR   ][3640] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:10:00,131 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,201 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,204 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,207 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,210 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,373 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,377 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,380 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,466 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,470 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,474 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,477 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,538 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,562 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,566 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,570 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,573 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,577 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,581 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,585 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,589 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,593 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,596 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,600 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,604 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,608 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,611 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,615 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,620 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,624 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,627 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,632 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,635 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,639 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,643 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,647 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,650 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,654 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,658 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,662 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,666 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,669 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,673 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,677 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,681 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,684 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,687 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,691 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,695 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,699 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,703 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,706 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,710 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,714 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,717 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,721 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:00,725 [salt.utils.decorators:82  ][ERROR   ][4097] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:06,040 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][4097] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:10:06,042 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][4097] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Hit:2 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Get:3 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease [2821 B]
Hit:4 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:5 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 441 kB in 0s (864 kB/s)
Reading package lists...
2019-02-05 17:10:06,045 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][4097] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:10:06,045 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][4097] retcode: 100
2019-02-05 17:10:06,046 [salt.state       :302 ][ERROR   ][4097] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:10:06,573 [salt.state       :302 ][ERROR   ][4097] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:10:06,579 [salt.state       :302 ][ERROR   ][4097] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:10:06,584 [salt.state       :302 ][ERROR   ][4097] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:10:38,874 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:38,939 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:38,942 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:38,946 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:38,948 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,121 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,124 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,128 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,216 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,220 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,224 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,227 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,291 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,313 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,317 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,321 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,324 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,328 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,332 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,335 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,339 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,344 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,348 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,351 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,355 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,359 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,363 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,367 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,370 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,374 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,378 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,382 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,385 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,390 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,393 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,397 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,400 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,404 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,408 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,411 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,416 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,419 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,422 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,427 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,431 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,434 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,440 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,443 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,446 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,451 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,455 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,458 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,462 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,466 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,470 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,474 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:39,478 [salt.utils.decorators:82  ][ERROR   ][4544] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:10:44,767 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][4544] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:10:44,768 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][4544] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Hit:2 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Hit:3 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease
Hit:4 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Get:5 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 439 kB in 0s (859 kB/s)
Reading package lists...
2019-02-05 17:10:44,772 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][4544] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:10:44,772 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][4544] retcode: 100
2019-02-05 17:10:44,773 [salt.state       :302 ][ERROR   ][4544] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:10:45,240 [salt.state       :302 ][ERROR   ][4544] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:10:45,247 [salt.state       :302 ][ERROR   ][4544] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:10:45,253 [salt.state       :302 ][ERROR   ][4544] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:11:17,924 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:17,983 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:17,986 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:17,989 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:17,991 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,154 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,157 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,160 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,234 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,237 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,240 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,243 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,300 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,320 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,323 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,327 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,331 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,334 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,338 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,341 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,345 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,348 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,352 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,356 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,360 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,364 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,368 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,371 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,374 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,378 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,382 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,386 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,389 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,393 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,397 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,400 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,404 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,408 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,411 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,416 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,419 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,423 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,427 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,431 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,435 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,439 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,442 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,446 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,449 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,453 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,456 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,460 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,464 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,468 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,472 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,476 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:18,480 [salt.utils.decorators:82  ][ERROR   ][4991] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:23,828 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][4991] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:11:23,829 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][4991] stdout: Get:1 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Hit:2 http://archive.ubuntu.com/ubuntu xenial InRelease
Hit:3 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease
Hit:4 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 439 kB in 0s (741 kB/s)
Reading package lists...
2019-02-05 17:11:23,832 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][4991] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:11:23,833 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][4991] retcode: 100
2019-02-05 17:11:23,834 [salt.state       :302 ][ERROR   ][4991] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:11:24,294 [salt.state       :302 ][ERROR   ][4991] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:11:24,300 [salt.state       :302 ][ERROR   ][4991] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:11:24,305 [salt.state       :302 ][ERROR   ][4991] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:11:55,034 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,100 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,103 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,105 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,108 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,287 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,292 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,295 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,380 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,383 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,387 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,390 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,453 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,476 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,480 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,486 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,489 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,493 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,497 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,501 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,504 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,508 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,512 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,515 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,519 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,523 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,527 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,530 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,534 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,537 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,541 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,545 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,548 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,552 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,556 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,559 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,563 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,567 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,571 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,574 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,578 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,582 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,585 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,589 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,593 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,596 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,600 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,604 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,607 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,611 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,615 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,618 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,621 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,625 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,629 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,633 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:11:55,636 [salt.utils.decorators:82  ][ERROR   ][5438] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:00,898 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][5438] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:12:00,899 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][5438] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Hit:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Hit:4 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease
Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 439 kB in 0s (811 kB/s)
Reading package lists...
2019-02-05 17:12:00,902 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][5438] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:12:00,903 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][5438] retcode: 100
2019-02-05 17:12:00,904 [salt.state       :302 ][ERROR   ][5438] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:12:01,375 [salt.state       :302 ][ERROR   ][5438] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:12:01,381 [salt.state       :302 ][ERROR   ][5438] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:12:01,388 [salt.state       :302 ][ERROR   ][5438] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:12:33,648 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:33,714 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:33,717 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:33,719 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:33,722 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:33,893 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:33,897 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:33,901 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,011 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,015 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,019 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,022 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,087 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,107 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,110 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,114 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,118 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,122 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,125 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,129 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,133 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,136 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,140 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,144 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,148 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,152 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,155 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,160 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,164 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,168 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,174 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,178 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,182 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,186 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,189 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,194 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,198 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,201 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,206 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,209 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,213 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,217 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,221 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,225 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,230 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,233 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,237 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,241 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,245 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,248 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,252 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,257 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,260 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,264 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,269 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,272 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:34,276 [salt.utils.decorators:82  ][ERROR   ][5885] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:12:39,498 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][5885] Command '['apt-get', '-q', 'update']' failed with return code: 100
2019-02-05 17:12:39,498 [salt.loaded.int.module.cmdmod:732 ][ERROR   ][5885] stdout: Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Hit:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease
Hit:4 http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease
Hit:5 http://archive.ubuntu.com/ubuntu xenial-backports InRelease
Ign:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/restricted Sources [2528 B]
Get:8 http://archive.ubuntu.com/ubuntu xenial-updates/universe Sources [244 kB]
Get:9 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse Sources [8760 B]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources [329 kB]
Err:6 http://archive.ubuntu.com/ubuntu xenial-updates/main Sources
  Hash Sum mismatch
Fetched 439 kB in 0s (833 kB/s)
Reading package lists...
2019-02-05 17:12:39,499 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][5885] stderr: E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:12:39,499 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][5885] retcode: 100
2019-02-05 17:12:39,500 [salt.state       :302 ][ERROR   ][5885] An error was encountered while installing package(s): E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/source/Sources.xz  Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
2019-02-05 17:12:39,971 [salt.state       :302 ][ERROR   ][5885] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:12:39,977 [salt.state       :302 ][ERROR   ][5885] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:12:39,982 [salt.state       :302 ][ERROR   ][5885] State 'x509.private_key_managed' was not found in SLS 'salt.minion.cert'
Reason: 'x509' __virtual__ returned False: Could not load x509 state: m2crypto unavailable

2019-02-05 17:13:11,929 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:11,995 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:11,998 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,001 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,004 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,181 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,184 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,188 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,274 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,277 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,281 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,284 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,345 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,367 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,371 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,374 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,379 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,382 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,386 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,390 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,394 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,398 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,402 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,406 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,410 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,414 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,418 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,421 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,425 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,429 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,433 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,438 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,441 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,445 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,449 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,453 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,457 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,461 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,465 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,469 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,473 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,476 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,480 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,483 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,487 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,491 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,494 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,499 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,502 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,507 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,511 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,515 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,518 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,523 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,527 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,531 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:12,535 [salt.utils.decorators:82  ][ERROR   ][6332] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-02-05 17:13:23,917 [salt.loaded.int.states.file:2298][WARNING ][6332] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:13:27,766 [salt.loaded.int.states.file:2298][WARNING ][6332] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:13:29,211 [salt.loaded.int.states.file:2298][WARNING ][6332] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:09,659 [salt.utils.decorators:613 ][WARNING ][6974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-05 17:14:21,026 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:30,088 [salt.utils.decorators:613 ][WARNING ][6974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-05 17:14:31,764 [salt.utils.decorators:613 ][WARNING ][6974] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-02-05 17:14:31,883 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:31,885 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:31,887 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:31,888 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:31,890 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:31,891 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:31,892 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:31,893 [salt.loaded.int.states.file:2298][WARNING ][6974] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-02-05 17:14:33,706 [salt.loaded.int.module.debian_ip:1964][WARNING ][6974] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-02-05 17:14:33,858 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][6974] Command '['umount', '/dev/shm']' failed with return code: 32
2019-02-05 17:14:33,860 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][6974] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-02-05 17:14:33,862 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][6974] retcode: 32
2019-02-05 17:14:44,882 [salt.utils.parsers:1051][WARNING ][1395] Minion received a SIGTERM. Exiting.
2019-02-05 17:15:00,838 [salt.cli.daemons :293 ][INFO    ][1559] Setting up the Salt Minion "mdb01.mcp-odl-ha.local"
2019-02-05 17:15:01,723 [salt.cli.daemons :82  ][INFO    ][1559] Starting up the Salt Minion
2019-02-05 17:15:01,726 [salt.utils.event :1017][INFO    ][1559] Starting pull socket on /var/run/salt/minion/minion_event_e46c2d81b7_pull.ipc
2019-02-05 17:15:02,726 [salt.minion      :976 ][INFO    ][1559] Creating minion process manager
2019-02-05 17:15:04,400 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1559] Executing command ['date', '+%z'] in directory '/root'
2019-02-05 17:15:04,443 [salt.utils.schedule:568 ][INFO    ][1559] Updating job settings for scheduled job: __mine_interval
2019-02-05 17:15:04,445 [salt.minion      :1108][INFO    ][1559] Added mine.update to scheduler
2019-02-05 17:15:04,450 [salt.minion      :1975][INFO    ][1559] Minion is starting as user 'root'
2019-02-05 17:15:04,463 [salt.minion      :2336][INFO    ][1559] Minion is ready to receive requests!
2019-02-05 17:15:06,375 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command test.ping with jid 20190205171505376027
2019-02-05 17:15:06,394 [salt.minion      :1432][INFO    ][1679] Starting a new job with PID 1679
2019-02-05 17:15:06,433 [salt.minion      :1711][INFO    ][1679] Returning information for job: 20190205171505376027
2019-02-05 17:15:06,990 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command pkg.upgrade with jid 20190205171505989970
2019-02-05 17:15:07,016 [salt.minion      :1432][INFO    ][1684] Starting a new job with PID 1684
2019-02-05 17:15:07,209 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1684] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:15:08,191 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1684] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2019-02-05 17:15:16,111 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205171516088775
2019-02-05 17:15:16,133 [salt.minion      :1432][INFO    ][2704] Starting a new job with PID 2704
2019-02-05 17:15:16,189 [salt.minion      :1711][INFO    ][2704] Returning information for job: 20190205171516088775
2019-02-05 17:15:23,978 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1684] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:15:24,023 [salt.minion      :1711][INFO    ][1684] Returning information for job: 20190205171505989970
2019-02-05 17:22:51,110 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command test.ping with jid 20190205172251095038
2019-02-05 17:22:51,135 [salt.minion      :1432][INFO    ][3039] Starting a new job with PID 3039
2019-02-05 17:22:51,159 [salt.minion      :1711][INFO    ][3039] Returning information for job: 20190205172251095038
2019-02-05 17:26:06,968 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205172606954120
2019-02-05 17:26:06,982 [salt.minion      :1432][INFO    ][3045] Starting a new job with PID 3045
2019-02-05 17:26:12,521 [salt.state       :915 ][INFO    ][3045] Loading fresh modules for state activity
2019-02-05 17:26:12,594 [salt.fileclient  :1219][INFO    ][3045] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2019-02-05 17:26:12,637 [salt.fileclient  :1219][INFO    ][3045] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2019-02-05 17:26:14,002 [salt.state       :1780][INFO    ][3045] Running state [keepalived] at time 17:26:14.002734
2019-02-05 17:26:14,003 [salt.state       :1813][INFO    ][3045] Executing state pkg.installed for [keepalived]
2019-02-05 17:26:14,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:26:14,425 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2019-02-05 17:26:14,503 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 17:26:16,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 17:26:16,587 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2019-02-05 17:26:17,069 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205172617048342
2019-02-05 17:26:17,085 [salt.minion      :1432][INFO    ][3381] Starting a new job with PID 3381
2019-02-05 17:26:17,102 [salt.minion      :1711][INFO    ][3381] Returning information for job: 20190205172617048342
2019-02-05 17:26:20,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:26:20,857 [salt.state       :300 ][INFO    ][3045] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.2.24-1ubuntu0.16.04.1'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2019-02-05 17:26:20,884 [salt.state       :915 ][INFO    ][3045] Loading fresh modules for state activity
2019-02-05 17:26:20,929 [salt.state       :1951][INFO    ][3045] Completed state [keepalived] at time 17:26:20.929369 duration_in_ms=6926.636
2019-02-05 17:26:20,935 [salt.state       :1780][INFO    ][3045] Running state [lsof] at time 17:26:20.935329
2019-02-05 17:26:20,935 [salt.state       :1813][INFO    ][3045] Executing state pkg.installed for [lsof]
2019-02-05 17:26:21,654 [salt.state       :300 ][INFO    ][3045] All specified packages are already installed
2019-02-05 17:26:21,654 [salt.state       :1951][INFO    ][3045] Completed state [lsof] at time 17:26:21.654467 duration_in_ms=719.137
2019-02-05 17:26:21,659 [salt.state       :1780][INFO    ][3045] Running state [/etc/keepalived/keepalived.conf] at time 17:26:21.659564
2019-02-05 17:26:21,659 [salt.state       :1813][INFO    ][3045] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2019-02-05 17:26:21,693 [salt.fileclient  :1219][INFO    ][3045] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2019-02-05 17:26:21,755 [salt.state       :300 ][INFO    ][3045] File changed:
New file
2019-02-05 17:26:21,756 [salt.state       :1951][INFO    ][3045] Completed state [/etc/keepalived/keepalived.conf] at time 17:26:21.756306 duration_in_ms=96.742
2019-02-05 17:26:21,758 [salt.state       :1780][INFO    ][3045] Running state [keepalived] at time 17:26:21.758871
2019-02-05 17:26:21,759 [salt.state       :1813][INFO    ][3045] Executing state service.running for [keepalived]
2019-02-05 17:26:21,760 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2019-02-05 17:26:21,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-02-05 17:26:21,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-02-05 17:26:21,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2019-02-05 17:26:21,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-02-05 17:26:21,930 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-02-05 17:26:21,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-02-05 17:26:21,971 [salt.state       :300 ][INFO    ][3045] {'keepalived': True}
2019-02-05 17:26:21,972 [salt.state       :1951][INFO    ][3045] Completed state [keepalived] at time 17:26:21.972016 duration_in_ms=213.141
2019-02-05 17:26:21,974 [salt.minion      :1711][INFO    ][3045] Returning information for job: 20190205172606954120
2019-02-05 17:27:30,390 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command pillar.get with jid 20190205172730375860
2019-02-05 17:27:30,415 [salt.minion      :1432][INFO    ][4366] Starting a new job with PID 4366
2019-02-05 17:27:30,425 [salt.minion      :1711][INFO    ][4366] Returning information for job: 20190205172730375860
2019-02-05 17:38:48,007 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205173847993137
2019-02-05 17:38:48,028 [salt.minion      :1432][INFO    ][4391] Starting a new job with PID 4391
2019-02-05 17:38:56,341 [salt.state       :915 ][INFO    ][4391] Loading fresh modules for state activity
2019-02-05 17:38:56,395 [salt.fileclient  :1219][INFO    ][4391] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2019-02-05 17:38:56,597 [salt.fileclient  :1219][INFO    ][4391] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2019-02-05 17:38:56,624 [salt.fileclient  :1219][INFO    ][4391] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2019-02-05 17:38:57,416 [salt.state       :1780][INFO    ][4391] Running state [memcached] at time 17:38:57.416043
2019-02-05 17:38:57,417 [salt.state       :1813][INFO    ][4391] Executing state pkg.installed for [memcached]
2019-02-05 17:38:57,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:38:57,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2019-02-05 17:38:57,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 17:38:58,118 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205173858098086
2019-02-05 17:38:58,138 [salt.minion      :1432][INFO    ][4483] Starting a new job with PID 4483
2019-02-05 17:38:58,161 [salt.minion      :1711][INFO    ][4483] Returning information for job: 20190205173858098086
2019-02-05 17:38:59,767 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 17:38:59,793 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2019-02-05 17:39:03,172 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:39:03,213 [salt.state       :300 ][INFO    ][4391] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2019-02-05 17:39:03,237 [salt.state       :915 ][INFO    ][4391] Loading fresh modules for state activity
2019-02-05 17:39:03,285 [salt.state       :1951][INFO    ][4391] Completed state [memcached] at time 17:39:03.285372 duration_in_ms=5869.33
2019-02-05 17:39:03,291 [salt.state       :1780][INFO    ][4391] Running state [python-memcache] at time 17:39:03.291889
2019-02-05 17:39:03,292 [salt.state       :1813][INFO    ][4391] Executing state pkg.installed for [python-memcache]
2019-02-05 17:39:04,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 17:39:04,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2019-02-05 17:39:05,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:39:05,961 [salt.state       :300 ][INFO    ][4391] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2019-02-05 17:39:05,981 [salt.state       :915 ][INFO    ][4391] Loading fresh modules for state activity
2019-02-05 17:39:06,023 [salt.state       :1951][INFO    ][4391] Completed state [python-memcache] at time 17:39:06.023392 duration_in_ms=2731.502
2019-02-05 17:39:06,028 [salt.state       :1780][INFO    ][4391] Running state [/etc/memcached.conf] at time 17:39:06.028893
2019-02-05 17:39:06,029 [salt.state       :1813][INFO    ][4391] Executing state file.managed for [/etc/memcached.conf]
2019-02-05 17:39:06,064 [salt.fileclient  :1219][INFO    ][4391] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2019-02-05 17:39:06,103 [salt.state       :300 ][INFO    ][4391] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2019-02-05 17:39:06,110 [salt.state       :1951][INFO    ][4391] Completed state [/etc/memcached.conf] at time 17:39:06.110924 duration_in_ms=82.031
2019-02-05 17:39:06,639 [salt.state       :1780][INFO    ][4391] Running state [memcached] at time 17:39:06.638943
2019-02-05 17:39:06,639 [salt.state       :1813][INFO    ][4391] Executing state service.running for [memcached]
2019-02-05 17:39:06,640 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2019-02-05 17:39:06,658 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-02-05 17:39:06,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2019-02-05 17:39:06,688 [salt.state       :300 ][INFO    ][4391] The service memcached is already running
2019-02-05 17:39:06,689 [salt.state       :1951][INFO    ][4391] Completed state [memcached] at time 17:39:06.689115 duration_in_ms=50.171
2019-02-05 17:39:06,689 [salt.state       :1780][INFO    ][4391] Running state [memcached] at time 17:39:06.689425
2019-02-05 17:39:06,689 [salt.state       :1813][INFO    ][4391] Executing state service.mod_watch for [memcached]
2019-02-05 17:39:06,690 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-02-05 17:39:06,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4391] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2019-02-05 17:39:06,732 [salt.state       :300 ][INFO    ][4391] {'memcached': True}
2019-02-05 17:39:06,732 [salt.state       :1951][INFO    ][4391] Completed state [memcached] at time 17:39:06.732625 duration_in_ms=43.199
2019-02-05 17:39:06,738 [salt.minion      :1711][INFO    ][4391] Returning information for job: 20190205173847993137
2019-02-05 17:39:08,105 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205173908090535
2019-02-05 17:39:08,128 [salt.minion      :1432][INFO    ][5361] Starting a new job with PID 5361
2019-02-05 17:39:10,151 [salt.state       :915 ][INFO    ][5361] Loading fresh modules for state activity
2019-02-05 17:39:10,552 [salt.fileclient  :1219][INFO    ][5361] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2019-02-05 17:39:10,591 [salt.fileclient  :1219][INFO    ][5361] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2019-02-05 17:39:11,407 [salt.state       :1780][INFO    ][5361] Running state [haproxy] at time 17:39:11.407364
2019-02-05 17:39:11,407 [salt.state       :1813][INFO    ][5361] Executing state pkg.installed for [haproxy]
2019-02-05 17:39:11,408 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:39:11,819 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2019-02-05 17:39:11,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 17:39:13,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 17:39:13,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2019-02-05 17:39:17,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:39:17,502 [salt.state       :300 ][INFO    ][5361] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.2'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2019-02-05 17:39:17,530 [salt.state       :915 ][INFO    ][5361] Loading fresh modules for state activity
2019-02-05 17:39:17,577 [salt.state       :1951][INFO    ][5361] Completed state [haproxy] at time 17:39:17.577349 duration_in_ms=6169.985
2019-02-05 17:39:17,583 [salt.state       :1780][INFO    ][5361] Running state [/etc/default/haproxy] at time 17:39:17.582960
2019-02-05 17:39:17,583 [salt.state       :1813][INFO    ][5361] Executing state file.managed for [/etc/default/haproxy]
2019-02-05 17:39:17,623 [salt.fileclient  :1219][INFO    ][5361] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2019-02-05 17:39:17,629 [salt.state       :300 ][INFO    ][5361] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2019-02-05 17:39:17,632 [salt.state       :1951][INFO    ][5361] Completed state [/etc/default/haproxy] at time 17:39:17.631971 duration_in_ms=49.01
2019-02-05 17:39:17,632 [salt.state       :1780][INFO    ][5361] Running state [/etc/haproxy/haproxy.cfg] at time 17:39:17.632552
2019-02-05 17:39:17,633 [salt.state       :1813][INFO    ][5361] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2019-02-05 17:39:17,654 [salt.fileclient  :1219][INFO    ][5361] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2019-02-05 17:39:17,851 [salt.state       :300 ][INFO    ][5361] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2019-02-05 17:39:17,858 [salt.state       :1951][INFO    ][5361] Completed state [/etc/haproxy/haproxy.cfg] at time 17:39:17.857950 duration_in_ms=225.397
2019-02-05 17:39:17,858 [salt.state       :1780][INFO    ][5361] Running state [/etc/haproxy/ssl] at time 17:39:17.858352
2019-02-05 17:39:17,858 [salt.state       :1813][INFO    ][5361] Executing state file.directory for [/etc/haproxy/ssl]
2019-02-05 17:39:17,860 [salt.state       :300 ][INFO    ][5361] {'/etc/haproxy/ssl': 'New Dir'}
2019-02-05 17:39:17,860 [salt.state       :1951][INFO    ][5361] Completed state [/etc/haproxy/ssl] at time 17:39:17.860576 duration_in_ms=2.224
2019-02-05 17:39:17,869 [salt.state       :1780][INFO    ][5361] Running state [/etc/haproxy/errors/429.http11] at time 17:39:17.869318
2019-02-05 17:39:17,869 [salt.state       :1813][INFO    ][5361] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2019-02-05 17:39:17,896 [salt.fileclient  :1219][INFO    ][5361] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2019-02-05 17:39:17,906 [salt.state       :300 ][INFO    ][5361] File changed:
New file
2019-02-05 17:39:17,906 [salt.state       :1951][INFO    ][5361] Completed state [/etc/haproxy/errors/429.http11] at time 17:39:17.906291 duration_in_ms=36.973
2019-02-05 17:39:17,907 [salt.state       :1780][INFO    ][5361] Running state [haproxy_status_packages] at time 17:39:17.907445
2019-02-05 17:39:17,907 [salt.state       :1813][INFO    ][5361] Executing state pkg.installed for [haproxy_status_packages]
2019-02-05 17:39:18,222 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205173918202060
2019-02-05 17:39:18,245 [salt.minion      :1432][INFO    ][6171] Starting a new job with PID 6171
2019-02-05 17:39:18,264 [salt.minion      :1711][INFO    ][6171] Returning information for job: 20190205173918202060
2019-02-05 17:39:18,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 17:39:18,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2019-02-05 17:39:20,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 17:39:20,678 [salt.state       :300 ][INFO    ][5361] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2019-02-05 17:39:20,699 [salt.state       :915 ][INFO    ][5361] Loading fresh modules for state activity
2019-02-05 17:39:20,745 [salt.state       :1951][INFO    ][5361] Completed state [haproxy_status_packages] at time 17:39:20.745523 duration_in_ms=2838.077
2019-02-05 17:39:20,750 [salt.state       :1780][INFO    ][5361] Running state [/usr/bin/haproxy-status.sh] at time 17:39:20.750121
2019-02-05 17:39:20,750 [salt.state       :1813][INFO    ][5361] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2019-02-05 17:39:20,777 [salt.fileclient  :1219][INFO    ][5361] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2019-02-05 17:39:20,812 [salt.state       :300 ][INFO    ][5361] File changed:
New file
2019-02-05 17:39:20,812 [salt.state       :1951][INFO    ][5361] Completed state [/usr/bin/haproxy-status.sh] at time 17:39:20.812361 duration_in_ms=62.239
2019-02-05 17:39:20,815 [salt.state       :1780][INFO    ][5361] Running state [net.ipv4.ip_nonlocal_bind] at time 17:39:20.815442
2019-02-05 17:39:20,815 [salt.state       :1813][INFO    ][5361] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2019-02-05 17:39:20,819 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2019-02-05 17:39:20,849 [salt.state       :300 ][INFO    ][5361] {'net.ipv4.ip_nonlocal_bind': 1}
2019-02-05 17:39:20,849 [salt.state       :1951][INFO    ][5361] Completed state [net.ipv4.ip_nonlocal_bind] at time 17:39:20.849913 duration_in_ms=34.471
2019-02-05 17:39:21,419 [salt.state       :1780][INFO    ][5361] Running state [haproxy] at time 17:39:21.419572
2019-02-05 17:39:21,420 [salt.state       :1813][INFO    ][5361] Executing state service.running for [haproxy]
2019-02-05 17:39:21,420 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-02-05 17:39:21,441 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-02-05 17:39:21,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-02-05 17:39:21,477 [salt.state       :300 ][INFO    ][5361] The service haproxy is already running
2019-02-05 17:39:21,478 [salt.state       :1951][INFO    ][5361] Completed state [haproxy] at time 17:39:21.478395 duration_in_ms=58.82
2019-02-05 17:39:21,478 [salt.state       :1780][INFO    ][5361] Running state [haproxy] at time 17:39:21.478722
2019-02-05 17:39:21,479 [salt.state       :1813][INFO    ][5361] Executing state service.mod_watch for [haproxy]
2019-02-05 17:39:21,480 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-02-05 17:39:21,503 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5361] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2019-02-05 17:39:21,541 [salt.state       :300 ][INFO    ][5361] {'haproxy': True}
2019-02-05 17:39:21,542 [salt.state       :1951][INFO    ][5361] Completed state [haproxy] at time 17:39:21.542096 duration_in_ms=63.373
2019-02-05 17:39:21,546 [salt.minion      :1711][INFO    ][5361] Returning information for job: 20190205173908090535
2019-02-05 17:39:22,955 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command service.status with jid 20190205173922932912
2019-02-05 17:39:22,978 [salt.minion      :1432][INFO    ][6509] Starting a new job with PID 6509
2019-02-05 17:39:23,494 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-02-05 17:39:23,514 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-02-05 17:39:23,534 [salt.minion      :1711][INFO    ][6509] Returning information for job: 20190205173922932912
2019-02-05 17:39:24,495 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command service.restart with jid 20190205173924478717
2019-02-05 17:39:24,517 [salt.minion      :1432][INFO    ][6519] Starting a new job with PID 6519
2019-02-05 17:39:25,026 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6519] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2019-02-05 17:39:25,057 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6519] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2019-02-05 17:39:25,096 [salt.minion      :1711][INFO    ][6519] Returning information for job: 20190205173924478717
2019-02-05 18:05:35,194 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205180535178583
2019-02-05 18:05:35,214 [salt.minion      :1432][INFO    ][6575] Starting a new job with PID 6575
2019-02-05 18:05:36,191 [salt.state       :915 ][INFO    ][6575] Loading fresh modules for state activity
2019-02-05 18:05:36,257 [salt.fileclient  :1219][INFO    ][6575] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2019-02-05 18:05:36,293 [salt.fileclient  :1219][INFO    ][6575] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2019-02-05 18:05:36,321 [salt.fileclient  :1219][INFO    ][6575] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2019-02-05 18:05:36,366 [salt.fileclient  :1219][INFO    ][6575] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2019-02-05 18:05:37,178 [salt.state       :1780][INFO    ][6575] Running state [redis-server] at time 18:05:37.178650
2019-02-05 18:05:37,179 [salt.state       :1813][INFO    ][6575] Executing state pkg.installed for [redis-server]
2019-02-05 18:05:37,180 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:05:37,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2019-02-05 18:05:37,640 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 18:05:39,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:05:39,726 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2019-02-05 18:05:43,695 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:05:43,738 [salt.state       :300 ][INFO    ][6575] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2019-02-05 18:05:43,760 [salt.state       :915 ][INFO    ][6575] Loading fresh modules for state activity
2019-02-05 18:05:43,805 [salt.state       :1951][INFO    ][6575] Completed state [redis-server] at time 18:05:43.805350 duration_in_ms=6626.7
2019-02-05 18:05:43,811 [salt.state       :1780][INFO    ][6575] Running state [vm.overcommit_memory] at time 18:05:43.811042
2019-02-05 18:05:43,811 [salt.state       :1813][INFO    ][6575] Executing state sysctl.present for [vm.overcommit_memory]
2019-02-05 18:05:43,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2019-02-05 18:05:43,830 [salt.state       :300 ][INFO    ][6575] {'vm.overcommit_memory': 1}
2019-02-05 18:05:43,830 [salt.state       :1951][INFO    ][6575] Completed state [vm.overcommit_memory] at time 18:05:43.830852 duration_in_ms=19.808
2019-02-05 18:05:43,835 [salt.state       :1780][INFO    ][6575] Running state [/etc/redis/redis.conf] at time 18:05:43.834969
2019-02-05 18:05:43,835 [salt.state       :1813][INFO    ][6575] Executing state file.managed for [/etc/redis/redis.conf]
2019-02-05 18:05:43,884 [salt.fileclient  :1219][INFO    ][6575] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2019-02-05 18:05:43,961 [salt.state       :300 ][INFO    ][6575] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 192.168.10.32
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -695,8 +694,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -725,9 +723,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1371,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2019-02-05 18:05:43,969 [salt.state       :1951][INFO    ][6575] Completed state [/etc/redis/redis.conf] at time 18:05:43.969528 duration_in_ms=134.558
2019-02-05 18:05:44,497 [salt.state       :1780][INFO    ][6575] Running state [redis-server] at time 18:05:44.497219
2019-02-05 18:05:44,498 [salt.state       :1813][INFO    ][6575] Executing state service.running for [redis-server]
2019-02-05 18:05:44,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2019-02-05 18:05:44,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:44,538 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:44,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:44,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:44,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:44,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:44,711 [salt.state       :300 ][INFO    ][6575] {'redis-server': True}
2019-02-05 18:05:44,711 [salt.state       :1951][INFO    ][6575] Completed state [redis-server] at time 18:05:44.711678 duration_in_ms=214.457
2019-02-05 18:05:44,714 [salt.state       :1780][INFO    ][6575] Running state [redis-sentinel] at time 18:05:44.714052
2019-02-05 18:05:44,714 [salt.state       :1813][INFO    ][6575] Executing state pkg.installed for [redis-sentinel]
2019-02-05 18:05:44,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:05:44,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2019-02-05 18:05:45,262 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180545244925
2019-02-05 18:05:45,285 [salt.minion      :1432][INFO    ][7530] Starting a new job with PID 7530
2019-02-05 18:05:45,302 [salt.minion      :1711][INFO    ][7530] Returning information for job: 20190205180545244925
2019-02-05 18:05:48,241 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:05:48,286 [salt.state       :300 ][INFO    ][6575] Made the following changes:
'redis-sentinel' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'

2019-02-05 18:05:48,307 [salt.state       :915 ][INFO    ][6575] Loading fresh modules for state activity
2019-02-05 18:05:48,407 [salt.state       :1951][INFO    ][6575] Completed state [redis-sentinel] at time 18:05:48.407126 duration_in_ms=3693.073
2019-02-05 18:05:48,941 [salt.state       :1780][INFO    ][6575] Running state [/etc/redis/sentinel.conf] at time 18:05:48.941271
2019-02-05 18:05:48,941 [salt.state       :1813][INFO    ][6575] Executing state file.managed for [/etc/redis/sentinel.conf]
2019-02-05 18:05:48,967 [salt.fileclient  :1219][INFO    ][6575] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/sentinel.conf'
2019-02-05 18:05:49,015 [salt.state       :300 ][INFO    ][6575] File changed:
--- 
+++ 
@@ -1,7 +1,3 @@
-# Example sentinel.conf
-
-# *** IMPORTANT ***
-#
 # By default Sentinel will not be reachable from interfaces different than
 # localhost, either use the 'bind' directive to bind to a list of network
 # interfaces, or disable protected mode with "protected-mode no" by
@@ -13,7 +9,7 @@
 # For example you may use one of the following:
 #
 # bind 127.0.0.1 192.168.1.1
-bind 127.0.0.1 ::1
+bind 192.168.10.32
 #
 # protected-mode no
 
@@ -82,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -111,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -119,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -144,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -168,7 +164,7 @@
 # NOTIFICATION SCRIPT
 #
 # sentinel notification-script <master-name> <script-path>
-# 
+#
 # Call the specified notification script for any sentinel event that is
 # generated in the WARNING level (for instance -sdown, -odown, and so forth).
 # This script should notify the system administrator via email, SMS, or any
@@ -192,14 +188,14 @@
 # When the master changed because of a failover a script can be called in
 # order to perform application-specific tasks to notify the clients that the
 # configuration has changed and the master is at a different address.
-# 
+#
 # The following arguments are passed to the script:
 #
 # <master-name> <role> <state> <from-ip> <from-port> <to-ip> <to-port>
 #
 # <state> is currently always "failover"
 # <role> is either "leader" or "observer"
-# 
+#
 # The arguments from-ip, from-port, to-ip, to-port are used to communicate
 # the old address of the master and the new address of the elected replica
 # (now a master).

2019-02-05 18:05:49,015 [salt.state       :1951][INFO    ][6575] Completed state [/etc/redis/sentinel.conf] at time 18:05:49.015661 duration_in_ms=74.39
2019-02-05 18:05:49,016 [salt.state       :1780][INFO    ][6575] Running state [redis-sentinel] at time 18:05:49.016054
2019-02-05 18:05:49,016 [salt.state       :1813][INFO    ][6575] Executing state service.running for [redis-sentinel]
2019-02-05 18:05:49,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2019-02-05 18:05:49,036 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:49,051 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:49,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:49,159 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:49,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:49,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6575] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:49,217 [salt.state       :300 ][INFO    ][6575] {'redis-sentinel': True}
2019-02-05 18:05:49,217 [salt.state       :1951][INFO    ][6575] Completed state [redis-sentinel] at time 18:05:49.217748 duration_in_ms=201.691
2019-02-05 18:05:49,219 [salt.minion      :1711][INFO    ][6575] Returning information for job: 20190205180535178583
2019-02-05 18:05:49,794 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205180549780042
2019-02-05 18:05:49,813 [salt.minion      :1432][INFO    ][8034] Starting a new job with PID 8034
2019-02-05 18:05:57,720 [salt.state       :915 ][INFO    ][8034] Loading fresh modules for state activity
2019-02-05 18:05:58,678 [salt.state       :1780][INFO    ][8034] Running state [redis-server] at time 18:05:58.678563
2019-02-05 18:05:58,679 [salt.state       :1813][INFO    ][8034] Executing state pkg.installed for [redis-server]
2019-02-05 18:05:58,679 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:05:59,059 [salt.state       :300 ][INFO    ][8034] All specified packages are already installed
2019-02-05 18:05:59,060 [salt.state       :1951][INFO    ][8034] Completed state [redis-server] at time 18:05:59.060298 duration_in_ms=381.733
2019-02-05 18:05:59,061 [salt.state       :1780][INFO    ][8034] Running state [vm.overcommit_memory] at time 18:05:59.061715
2019-02-05 18:05:59,062 [salt.state       :1813][INFO    ][8034] Executing state sysctl.present for [vm.overcommit_memory]
2019-02-05 18:05:59,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2019-02-05 18:05:59,095 [salt.state       :300 ][INFO    ][8034] Sysctl value vm.overcommit_memory = 1 is already set
2019-02-05 18:05:59,095 [salt.state       :1951][INFO    ][8034] Completed state [vm.overcommit_memory] at time 18:05:59.095602 duration_in_ms=33.884
2019-02-05 18:05:59,103 [salt.state       :1780][INFO    ][8034] Running state [/etc/redis/redis.conf] at time 18:05:59.103091
2019-02-05 18:05:59,103 [salt.state       :1813][INFO    ][8034] Executing state file.managed for [/etc/redis/redis.conf]
2019-02-05 18:05:59,211 [salt.state       :300 ][INFO    ][8034] File /etc/redis/redis.conf is in the correct state
2019-02-05 18:05:59,211 [salt.state       :1951][INFO    ][8034] Completed state [/etc/redis/redis.conf] at time 18:05:59.211833 duration_in_ms=108.742
2019-02-05 18:05:59,213 [salt.state       :1780][INFO    ][8034] Running state [redis-server] at time 18:05:59.213607
2019-02-05 18:05:59,213 [salt.state       :1813][INFO    ][8034] Executing state service.running for [redis-server]
2019-02-05 18:05:59,214 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2019-02-05 18:05:59,239 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:59,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-02-05 18:05:59,275 [salt.state       :300 ][INFO    ][8034] The service redis-server is already running
2019-02-05 18:05:59,275 [salt.state       :1951][INFO    ][8034] Completed state [redis-server] at time 18:05:59.275589 duration_in_ms=61.978
2019-02-05 18:05:59,276 [salt.state       :1780][INFO    ][8034] Running state [redis-sentinel] at time 18:05:59.276105
2019-02-05 18:05:59,277 [salt.state       :1813][INFO    ][8034] Executing state pkg.installed for [redis-sentinel]
2019-02-05 18:05:59,291 [salt.state       :300 ][INFO    ][8034] All specified packages are already installed
2019-02-05 18:05:59,292 [salt.state       :1951][INFO    ][8034] Completed state [redis-sentinel] at time 18:05:59.292169 duration_in_ms=16.064
2019-02-05 18:05:59,293 [salt.state       :1780][INFO    ][8034] Running state [/etc/redis/sentinel.conf] at time 18:05:59.293927
2019-02-05 18:05:59,294 [salt.state       :1813][INFO    ][8034] Executing state file.managed for [/etc/redis/sentinel.conf]
2019-02-05 18:05:59,359 [salt.state       :300 ][INFO    ][8034] File changed:
--- 
+++ 
@@ -25,12 +25,12 @@
 # When running daemonized, Redis Sentinel writes a pid file in
 # /var/run/redis-sentinel.pid by default. You can specify a custom pid file
 # location here.
-pidfile "/var/run/sentinel/redis-sentinel.pid"
+pidfile /var/run/sentinel/redis-sentinel.pid
 
 # Specify the log file name. Also the empty string can be used to force
 # Sentinel to log on the standard output. Note that if you use standard
 # output for logging but daemonize, logs will be sent to /dev/null
-logfile "/var/log/redis/redis-sentinel.log"
+logfile /var/log/redis/redis-sentinel.log
 
 # sentinel announce-ip <ip>
 # sentinel announce-port <port>
@@ -59,7 +59,7 @@
 # For Redis Sentinel to chdir to /tmp at startup is the simplest thing
 # for the process to don't interfere with administrative tasks such as
 # unmounting filesystems.
-dir "/var/lib/redis"
+dir /var/lib/redis
 
 # sentinel monitor <master-name> <ip> <redis-port> <quorum>
 #
@@ -78,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel myid 686fc95bf56cf0f56d8ac15e2d5c43298740c93b
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -107,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel deny-scripts-reconfig yes
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -115,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel monitor master_1 192.168.10.32 6379 2
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -140,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel config-epoch master_1 0
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -213,7 +213,7 @@
 # where clients can set the script to anything and trigger a failover in order
 # to get the program executed.
 
-sentinel leader-epoch master_1 0
+sentinel deny-scripts-reconfig yes
 
 # REDIS COMMANDS RENAMING
 #
@@ -239,5 +239,3 @@
 # is possible to just rename a command to itsef:
 #
 # SENTINEL rename-command mymaster CONFIG CONFIG
-# Generated by CONFIG REWRITE
-sentinel current-epoch 0

2019-02-05 18:05:59,359 [salt.state       :1951][INFO    ][8034] Completed state [/etc/redis/sentinel.conf] at time 18:05:59.359277 duration_in_ms=65.349
2019-02-05 18:05:59,359 [salt.state       :1780][INFO    ][8034] Running state [redis-sentinel] at time 18:05:59.359658
2019-02-05 18:05:59,359 [salt.state       :1813][INFO    ][8034] Executing state service.running for [redis-sentinel]
2019-02-05 18:05:59,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2019-02-05 18:05:59,379 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:59,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:59,410 [salt.state       :300 ][INFO    ][8034] The service redis-sentinel is already running
2019-02-05 18:05:59,411 [salt.state       :1951][INFO    ][8034] Completed state [redis-sentinel] at time 18:05:59.411334 duration_in_ms=51.673
2019-02-05 18:05:59,411 [salt.state       :1780][INFO    ][8034] Running state [redis-sentinel] at time 18:05:59.411924
2019-02-05 18:05:59,413 [salt.state       :1813][INFO    ][8034] Executing state service.mod_watch for [redis-sentinel]
2019-02-05 18:05:59,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:59,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8034] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2019-02-05 18:05:59,599 [salt.state       :300 ][INFO    ][8034] {'redis-sentinel': True}
2019-02-05 18:05:59,600 [salt.state       :1951][INFO    ][8034] Completed state [redis-sentinel] at time 18:05:59.600263 duration_in_ms=188.338
2019-02-05 18:05:59,603 [salt.minion      :1711][INFO    ][8034] Returning information for job: 20190205180549780042
2019-02-05 18:06:10,659 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command test.ping with jid 20190205180610643904
2019-02-05 18:06:10,680 [salt.minion      :1432][INFO    ][8124] Starting a new job with PID 8124
2019-02-05 18:06:10,704 [salt.minion      :1711][INFO    ][8124] Returning information for job: 20190205180610643904
2019-02-05 18:06:10,831 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205180610811777
2019-02-05 18:06:10,852 [salt.minion      :1432][INFO    ][8129] Starting a new job with PID 8129
2019-02-05 18:06:11,867 [salt.state       :915 ][INFO    ][8129] Loading fresh modules for state activity
2019-02-05 18:06:11,933 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2019-02-05 18:06:12,013 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2019-02-05 18:06:12,091 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2019-02-05 18:06:12,131 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2019-02-05 18:06:12,170 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2019-02-05 18:06:12,267 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2019-02-05 18:06:12,353 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2019-02-05 18:06:12,469 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2019-02-05 18:06:12,611 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2019-02-05 18:06:12,692 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2019-02-05 18:06:12,765 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2019-02-05 18:06:12,828 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2019-02-05 18:06:13,669 [salt.state       :1780][INFO    ][8129] Running state [apache2] at time 18:06:13.669164
2019-02-05 18:06:13,669 [salt.state       :1813][INFO    ][8129] Executing state pkg.installed for [apache2]
2019-02-05 18:06:13,670 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:06:14,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2019-02-05 18:06:14,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 18:06:16,329 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:06:16,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2019-02-05 18:06:20,876 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180620857760
2019-02-05 18:06:20,895 [salt.minion      :1432][INFO    ][9468] Starting a new job with PID 9468
2019-02-05 18:06:20,915 [salt.minion      :1711][INFO    ][9468] Returning information for job: 20190205180620857760
2019-02-05 18:06:23,470 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:06:23,518 [salt.state       :300 ][INFO    ][8129] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2019-02-05 18:06:23,544 [salt.state       :915 ][INFO    ][8129] Loading fresh modules for state activity
2019-02-05 18:06:23,589 [salt.state       :1951][INFO    ][8129] Completed state [apache2] at time 18:06:23.589780 duration_in_ms=9920.616
2019-02-05 18:06:23,596 [salt.state       :1780][INFO    ][8129] Running state [openssl] at time 18:06:23.596207
2019-02-05 18:06:23,596 [salt.state       :1813][INFO    ][8129] Executing state pkg.installed for [openssl]
2019-02-05 18:06:24,346 [salt.state       :300 ][INFO    ][8129] All specified packages are already installed
2019-02-05 18:06:24,346 [salt.state       :1951][INFO    ][8129] Completed state [openssl] at time 18:06:24.346362 duration_in_ms=750.153
2019-02-05 18:06:24,348 [salt.state       :1780][INFO    ][8129] Running state [a2enmod rewrite] at time 18:06:24.347972
2019-02-05 18:06:24,348 [salt.state       :1813][INFO    ][8129] Executing state cmd.run for [a2enmod rewrite]
2019-02-05 18:06:24,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command 'a2enmod rewrite' in directory '/root'
2019-02-05 18:06:24,406 [salt.state       :300 ][INFO    ][8129] {'pid': 9603, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-02-05 18:06:24,406 [salt.state       :1951][INFO    ][8129] Completed state [a2enmod rewrite] at time 18:06:24.406593 duration_in_ms=58.621
2019-02-05 18:06:24,407 [salt.state       :1780][INFO    ][8129] Running state [libapache2-mod-wsgi] at time 18:06:24.407838
2019-02-05 18:06:24,408 [salt.state       :1813][INFO    ][8129] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-02-05 18:06:24,440 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:06:24,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2019-02-05 18:06:29,039 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:06:29,092 [salt.state       :300 ][INFO    ][8129] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'

2019-02-05 18:06:29,112 [salt.state       :915 ][INFO    ][8129] Loading fresh modules for state activity
2019-02-05 18:06:29,153 [salt.state       :1951][INFO    ][8129] Completed state [libapache2-mod-wsgi] at time 18:06:29.153919 duration_in_ms=4746.08
2019-02-05 18:06:29,157 [salt.state       :1780][INFO    ][8129] Running state [a2enmod wsgi] at time 18:06:29.157821
2019-02-05 18:06:29,158 [salt.state       :1813][INFO    ][8129] Executing state cmd.run for [a2enmod wsgi]
2019-02-05 18:06:29,158 [salt.state       :300 ][INFO    ][8129] /etc/apache2/mods-enabled/wsgi.load exists
2019-02-05 18:06:29,158 [salt.state       :1951][INFO    ][8129] Completed state [a2enmod wsgi] at time 18:06:29.158779 duration_in_ms=0.958
2019-02-05 18:06:29,163 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 18:06:29.163817
2019-02-05 18:06:29,164 [salt.state       :1813][INFO    ][8129] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-02-05 18:06:29,201 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2019-02-05 18:06:29,265 [salt.state       :300 ][INFO    ][8129] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2019-02-05 18:06:29,265 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 18:06:29.265661 duration_in_ms=101.843
2019-02-05 18:06:29,265 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 18:06:29.265917
2019-02-05 18:06:29,266 [salt.state       :1813][INFO    ][8129] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-02-05 18:06:29,266 [salt.state       :300 ][INFO    ][8129] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-02-05 18:06:29,266 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 18:06:29.266831 duration_in_ms=0.914
2019-02-05 18:06:29,267 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 18:06:29.267063
2019-02-05 18:06:29,267 [salt.state       :1813][INFO    ][8129] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-02-05 18:06:29,267 [salt.state       :300 ][INFO    ][8129] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2019-02-05 18:06:29,267 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 18:06:29.267813 duration_in_ms=0.75
2019-02-05 18:06:29,268 [salt.state       :1780][INFO    ][8129] Running state [a2enmod mpm_prefork] at time 18:06:29.268623
2019-02-05 18:06:29,268 [salt.state       :1813][INFO    ][8129] Executing state cmd.run for [a2enmod mpm_prefork]
2019-02-05 18:06:29,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command 'a2enmod mpm_prefork' in directory '/root'
2019-02-05 18:06:29,332 [salt.state       :300 ][INFO    ][8129] {'pid': 9931, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-02-05 18:06:29,332 [salt.state       :1951][INFO    ][8129] Completed state [a2enmod mpm_prefork] at time 18:06:29.332788 duration_in_ms=64.164
2019-02-05 18:06:29,333 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 18:06:29.333335
2019-02-05 18:06:29,333 [salt.state       :1813][INFO    ][8129] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-02-05 18:06:29,334 [salt.state       :300 ][INFO    ][8129] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-02-05 18:06:29,334 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 18:06:29.334496 duration_in_ms=1.161
2019-02-05 18:06:29,334 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 18:06:29.334779
2019-02-05 18:06:29,335 [salt.state       :1813][INFO    ][8129] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-02-05 18:06:29,335 [salt.state       :300 ][INFO    ][8129] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2019-02-05 18:06:29,335 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 18:06:29.335679 duration_in_ms=0.9
2019-02-05 18:06:29,339 [salt.state       :1780][INFO    ][8129] Running state [apache_server_service_task] at time 18:06:29.339270
2019-02-05 18:06:29,339 [salt.state       :1813][INFO    ][8129] Executing state test.show_notification for [apache_server_service_task]
2019-02-05 18:06:29,339 [salt.state       :300 ][INFO    ][8129] Running apache.server.service
2019-02-05 18:06:29,340 [salt.state       :1951][INFO    ][8129] Completed state [apache_server_service_task] at time 18:06:29.340166 duration_in_ms=0.895
2019-02-05 18:06:29,341 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/ports.conf] at time 18:06:29.341235
2019-02-05 18:06:29,341 [salt.state       :1813][INFO    ][8129] Executing state file.managed for [/etc/apache2/ports.conf]
2019-02-05 18:06:29,365 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2019-02-05 18:06:29,433 [salt.state       :300 ][INFO    ][8129] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2019-02-05 18:06:29,433 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/ports.conf] at time 18:06:29.433743 duration_in_ms=92.508
2019-02-05 18:06:29,434 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/conf-available/security.conf] at time 18:06:29.434212
2019-02-05 18:06:29,434 [salt.state       :1813][INFO    ][8129] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-02-05 18:06:29,456 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2019-02-05 18:06:29,515 [salt.state       :300 ][INFO    ][8129] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2019-02-05 18:06:29,515 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/conf-available/security.conf] at time 18:06:29.515643 duration_in_ms=81.431
2019-02-05 18:06:30,070 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 18:06:30.069936
2019-02-05 18:06:30,070 [salt.state       :1813][INFO    ][8129] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-02-05 18:06:30,070 [salt.state       :300 ][INFO    ][8129] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2019-02-05 18:06:30,071 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 18:06:30.071163 duration_in_ms=1.228
2019-02-05 18:06:30,071 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 18:06:30.071652
2019-02-05 18:06:30,071 [salt.state       :1813][INFO    ][8129] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-02-05 18:06:30,093 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2019-02-05 18:06:30,131 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2019-02-05 18:06:30,206 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2019-02-05 18:06:30,233 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2019-02-05 18:06:30,322 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2019-02-05 18:06:30,349 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2019-02-05 18:06:30,383 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2019-02-05 18:06:30,398 [salt.state       :300 ][INFO    ][8129] File changed:
New file
2019-02-05 18:06:30,399 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 18:06:30.399028 duration_in_ms=327.375
2019-02-05 18:06:30,399 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 18:06:30.399554
2019-02-05 18:06:30,399 [salt.state       :1813][INFO    ][8129] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-02-05 18:06:30,647 [salt.state       :300 ][INFO    ][8129] File changed:
New file
2019-02-05 18:06:30,647 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 18:06:30.647427 duration_in_ms=247.872
2019-02-05 18:06:30,649 [salt.state       :1780][INFO    ][8129] Running state [apache2] at time 18:06:30.649591
2019-02-05 18:06:30,649 [salt.state       :1813][INFO    ][8129] Executing state service.running for [apache2]
2019-02-05 18:06:30,650 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-02-05 18:06:30,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:06:30,698 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:06:30,721 [salt.state       :300 ][INFO    ][8129] The service apache2 is already running
2019-02-05 18:06:30,722 [salt.state       :1951][INFO    ][8129] Completed state [apache2] at time 18:06:30.722041 duration_in_ms=72.446
2019-02-05 18:06:30,722 [salt.state       :1780][INFO    ][8129] Running state [apache2] at time 18:06:30.722823
2019-02-05 18:06:30,723 [salt.state       :1813][INFO    ][8129] Executing state service.mod_watch for [apache2]
2019-02-05 18:06:30,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:06:30,745 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2019-02-05 18:06:30,921 [salt.state       :300 ][INFO    ][8129] {'apache2': True}
2019-02-05 18:06:30,922 [salt.state       :1951][INFO    ][8129] Completed state [apache2] at time 18:06:30.922404 duration_in_ms=199.58
2019-02-05 18:06:30,924 [salt.state       :1780][INFO    ][8129] Running state [/etc/apache2/conf-enabled/security.conf] at time 18:06:30.924193
2019-02-05 18:06:30,925 [salt.state       :1813][INFO    ][8129] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-02-05 18:06:30,933 [salt.state       :300 ][INFO    ][8129] {'new': '/etc/apache2/conf-enabled/security.conf'}
2019-02-05 18:06:30,934 [salt.state       :1951][INFO    ][8129] Completed state [/etc/apache2/conf-enabled/security.conf] at time 18:06:30.934387 duration_in_ms=10.193
2019-02-05 18:06:30,936 [salt.state       :1780][INFO    ][8129] Running state [gnocchi-common] at time 18:06:30.936788
2019-02-05 18:06:30,938 [salt.state       :1813][INFO    ][8129] Executing state pkg.installed for [gnocchi-common]
2019-02-05 18:06:30,990 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180630973968
2019-02-05 18:06:31,009 [salt.minion      :1432][INFO    ][10035] Starting a new job with PID 10035
2019-02-05 18:06:31,025 [salt.minion      :1711][INFO    ][10035] Returning information for job: 20190205180630973968
2019-02-05 18:06:31,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:06:31,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2019-02-05 18:06:41,112 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180641097067
2019-02-05 18:06:41,130 [salt.minion      :1432][INFO    ][11349] Starting a new job with PID 11349
2019-02-05 18:06:41,149 [salt.minion      :1711][INFO    ][11349] Returning information for job: 20190205180641097067
2019-02-05 18:06:51,241 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180651224895
2019-02-05 18:06:51,254 [salt.minion      :1432][INFO    ][12449] Starting a new job with PID 12449
2019-02-05 18:06:51,270 [salt.minion      :1711][INFO    ][12449] Returning information for job: 20190205180651224895
2019-02-05 18:06:59,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:06:59,505 [salt.state       :300 ][INFO    ][8129] Made the following changes:
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-os-service-types' changed from 'absent' to '1.3.0-1~u16.04+mcp'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-editor' changed from 'absent' to '0.4-2'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.6.0+dfsg.1-1~u16.04+mcp'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~u16.04+mcp'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.40.0-1~u16.04+mcp'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.5'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'liblapack.so.3' changed from 'absent' to '1'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.21.0-1~u16.04+mcp'
'python-oslo.cache' changed from 'absent' to '1.30.2-1~u16.04+mcp3'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.6.0+dfsg.1-1~u16.04+mcp'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-debtcollector' changed from 'absent' to '1.20.0-2~u16.04+mcp'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python-lxml' changed from 'absent' to '3.5.0-1ubuntu0.1'
'python-oslo.config' changed from 'absent' to '1:6.4.0-1~u16.04+mcp'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'python2.7-testscenarios' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.27.0-1~u16.04+mcp'
'python-oslo.utils' changed from 'absent' to '3.36.4-1~u16.04+mcp'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.21.0-1~u16.04+mcp'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python2.7-simplejson' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.39.0-1~u16.04+mcp'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-pbr' changed from 'absent' to '4.2.0-4~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.3.0-1~u16.04+mcp'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp4'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-keystoneclient' changed from 'absent' to '1:3.17.0-1~u16.04+mcp4'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystoneauth1' changed from 'absent' to '3.10.0-1~u16.04+mcp10'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-stevedore' changed from 'absent' to '1:1.29.0-1~u16.04+mcp'
'python-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp8'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2019-02-05 18:06:59,534 [salt.state       :915 ][INFO    ][8129] Loading fresh modules for state activity
2019-02-05 18:06:59,575 [salt.state       :1951][INFO    ][8129] Completed state [gnocchi-common] at time 18:06:59.575088 duration_in_ms=28638.299
2019-02-05 18:06:59,578 [salt.state       :1780][INFO    ][8129] Running state [gnocchi_ssl_mysql] at time 18:06:59.578463
2019-02-05 18:06:59,578 [salt.state       :1813][INFO    ][8129] Executing state test.show_notification for [gnocchi_ssl_mysql]
2019-02-05 18:06:59,579 [salt.state       :300 ][INFO    ][8129] Running gnocchi._ssl.mysql
2019-02-05 18:06:59,579 [salt.state       :1951][INFO    ][8129] Completed state [gnocchi_ssl_mysql] at time 18:06:59.579292 duration_in_ms=0.829
2019-02-05 18:06:59,581 [salt.state       :1780][INFO    ][8129] Running state [/etc/gnocchi/gnocchi.conf] at time 18:06:59.581721
2019-02-05 18:06:59,582 [salt.state       :1813][INFO    ][8129] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2019-02-05 18:06:59,617 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2019-02-05 18:06:59,723 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2019-02-05 18:06:59,739 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2019-02-05 18:06:59,775 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2019-02-05 18:06:59,819 [salt.fileclient  :1219][INFO    ][8129] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2019-02-05 18:06:59,828 [salt.state       :300 ][INFO    ][8129] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.32:6379

2019-02-05 18:06:59,829 [salt.state       :1951][INFO    ][8129] Completed state [/etc/gnocchi/gnocchi.conf] at time 18:06:59.829107 duration_in_ms=247.386
2019-02-05 18:06:59,833 [salt.state       :1780][INFO    ][8129] Running state [gnocchi-api] at time 18:06:59.833128
2019-02-05 18:06:59,833 [salt.state       :1813][INFO    ][8129] Executing state pkg.installed for [gnocchi-api]
2019-02-05 18:07:01,363 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180701345048
2019-02-05 18:07:01,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:07:01,387 [salt.minion      :1432][INFO    ][13010] Starting a new job with PID 13010
2019-02-05 18:07:01,402 [salt.minion      :1711][INFO    ][13010] Returning information for job: 20190205180701345048
2019-02-05 18:07:01,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2019-02-05 18:07:08,826 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:07:08,880 [salt.state       :300 ][INFO    ][8129] Made the following changes:
'python-novaclient' changed from 'absent' to '2:11.0.0-2~u16.04+mcp13'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.11.1-2~u16.04+mcp'
'python-openstacksdk' changed from 'absent' to '0.17.2-2~u16.04+mcp'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'python-glanceclient' changed from 'absent' to '1:2.13.0-3~u16.04+mcp3'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.16.1-3~u16.04+mcp8'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-cinderclient' changed from 'absent' to '1:4.0.1-1~u16.04+mcp4'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.9.1-1~u16.04+mcp4'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'

2019-02-05 18:07:08,908 [salt.state       :915 ][INFO    ][8129] Loading fresh modules for state activity
2019-02-05 18:07:08,957 [salt.state       :1951][INFO    ][8129] Completed state [gnocchi-api] at time 18:07:08.957356 duration_in_ms=9124.227
2019-02-05 18:07:08,964 [salt.state       :1780][INFO    ][8129] Running state [gnocchi-metricd] at time 18:07:08.964921
2019-02-05 18:07:08,965 [salt.state       :1813][INFO    ][8129] Executing state pkg.installed for [gnocchi-metricd]
2019-02-05 18:07:10,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:07:10,209 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2019-02-05 18:07:11,506 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180711492348
2019-02-05 18:07:11,524 [salt.minion      :1432][INFO    ][13971] Starting a new job with PID 13971
2019-02-05 18:07:11,542 [salt.minion      :1711][INFO    ][13971] Returning information for job: 20190205180711492348
2019-02-05 18:07:13,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:07:13,105 [salt.state       :300 ][INFO    ][8129] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2019-02-05 18:07:13,136 [salt.state       :915 ][INFO    ][8129] Loading fresh modules for state activity
2019-02-05 18:07:13,353 [salt.state       :1951][INFO    ][8129] Completed state [gnocchi-metricd] at time 18:07:13.353385 duration_in_ms=4388.464
2019-02-05 18:07:13,359 [salt.state       :1780][INFO    ][8129] Running state [python-memcache] at time 18:07:13.359469
2019-02-05 18:07:13,359 [salt.state       :1813][INFO    ][8129] Executing state pkg.installed for [python-memcache]
2019-02-05 18:07:14,235 [salt.state       :300 ][INFO    ][8129] All specified packages are already installed
2019-02-05 18:07:14,235 [salt.state       :1951][INFO    ][8129] Completed state [python-memcache] at time 18:07:14.235451 duration_in_ms=875.979
2019-02-05 18:07:14,237 [salt.state       :1780][INFO    ][8129] Running state [gnocchi-upgrade] at time 18:07:14.237388
2019-02-05 18:07:14,237 [salt.state       :1813][INFO    ][8129] Executing state cmd.run for [gnocchi-upgrade]
2019-02-05 18:07:14,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2019-02-05 18:07:16,407 [salt.state       :300 ][INFO    ][8129] {'pid': 14133, 'retcode': 0, 'stderr': '2019-02-05 18:07:15,684 [14141] INFO     gnocchi.service: Gnocchi version 4.2.4\n2019-02-05 18:07:16,086 [14141] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2019-02-05 18:07:16,304 [14141] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.32,port=6379,db=0>>>\n2019-02-05 18:07:16,305 [14141] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2019-02-05 18:07:16,409 [salt.state       :1951][INFO    ][8129] Completed state [gnocchi-upgrade] at time 18:07:16.408944 duration_in_ms=2171.551
2019-02-05 18:07:16,413 [salt.state       :1780][INFO    ][8129] Running state [wsgi_gnocchi] at time 18:07:16.413113
2019-02-05 18:07:16,413 [salt.state       :1813][INFO    ][8129] Executing state apache_site.enabled for [wsgi_gnocchi]
2019-02-05 18:07:16,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2019-02-05 18:07:16,474 [salt.state       :300 ][INFO    ][8129] {'new': 'wsgi_gnocchi', 'old': None}
2019-02-05 18:07:16,474 [salt.state       :1951][INFO    ][8129] Completed state [wsgi_gnocchi] at time 18:07:16.474618 duration_in_ms=61.502
2019-02-05 18:07:16,477 [salt.state       :1780][INFO    ][8129] Running state [apache2] at time 18:07:16.477375
2019-02-05 18:07:16,477 [salt.state       :1813][INFO    ][8129] Executing state service.running for [apache2]
2019-02-05 18:07:16,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:07:16,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:07:16,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2019-02-05 18:07:17,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:07:17,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:07:17,778 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:07:17,808 [salt.state       :300 ][INFO    ][8129] {'apache2': True}
2019-02-05 18:07:17,809 [salt.state       :1951][INFO    ][8129] Completed state [apache2] at time 18:07:17.809610 duration_in_ms=1332.232
2019-02-05 18:07:17,811 [salt.state       :1780][INFO    ][8129] Running state [gnocchi-metricd] at time 18:07:17.811271
2019-02-05 18:07:17,811 [salt.state       :1813][INFO    ][8129] Executing state service.running for [gnocchi-metricd]
2019-02-05 18:07:17,817 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2019-02-05 18:07:17,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:17,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:17,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:17,956 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:17,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:18,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:18,074 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:18,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8129] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-02-05 18:07:18,779 [salt.state       :300 ][INFO    ][8129] {'gnocchi-metricd': True}
2019-02-05 18:07:18,785 [salt.state       :1951][INFO    ][8129] Completed state [gnocchi-metricd] at time 18:07:18.785177 duration_in_ms=973.903
2019-02-05 18:07:18,797 [salt.minion      :1711][INFO    ][8129] Returning information for job: 20190205180610811777
2019-02-05 18:09:39,622 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command test.ping with jid 20190205180939606402
2019-02-05 18:09:39,642 [salt.minion      :1432][INFO    ][14440] Starting a new job with PID 14440
2019-02-05 18:09:39,664 [salt.minion      :1711][INFO    ][14440] Returning information for job: 20190205180939606402
2019-02-05 18:09:39,833 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205180939815847
2019-02-05 18:09:39,846 [salt.minion      :1432][INFO    ][14445] Starting a new job with PID 14445
2019-02-05 18:09:47,782 [salt.state       :915 ][INFO    ][14445] Loading fresh modules for state activity
2019-02-05 18:09:47,848 [salt.fileclient  :1219][INFO    ][14445] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2019-02-05 18:09:47,886 [salt.fileclient  :1219][INFO    ][14445] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2019-02-05 18:09:48,589 [salt.fileclient  :1219][INFO    ][14445] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2019-02-05 18:09:48,652 [salt.fileclient  :1219][INFO    ][14445] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2019-02-05 18:09:49,950 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205180949929037
2019-02-05 18:09:49,970 [salt.minion      :1432][INFO    ][14480] Starting a new job with PID 14480
2019-02-05 18:09:49,991 [salt.minion      :1711][INFO    ][14480] Returning information for job: 20190205180949929037
2019-02-05 18:09:50,484 [salt.state       :1780][INFO    ][14445] Running state [apache2] at time 18:09:50.483971
2019-02-05 18:09:50,484 [salt.state       :1813][INFO    ][14445] Executing state pkg.installed for [apache2]
2019-02-05 18:09:50,485 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:09:50,885 [salt.state       :300 ][INFO    ][14445] All specified packages are already installed
2019-02-05 18:09:50,886 [salt.state       :1951][INFO    ][14445] Completed state [apache2] at time 18:09:50.886077 duration_in_ms=402.104
2019-02-05 18:09:50,886 [salt.state       :1780][INFO    ][14445] Running state [openssl] at time 18:09:50.886514
2019-02-05 18:09:50,886 [salt.state       :1813][INFO    ][14445] Executing state pkg.installed for [openssl]
2019-02-05 18:09:50,896 [salt.state       :300 ][INFO    ][14445] All specified packages are already installed
2019-02-05 18:09:50,896 [salt.state       :1951][INFO    ][14445] Completed state [openssl] at time 18:09:50.896376 duration_in_ms=9.862
2019-02-05 18:09:50,897 [salt.state       :1780][INFO    ][14445] Running state [a2enmod rewrite] at time 18:09:50.897091
2019-02-05 18:09:50,897 [salt.state       :1813][INFO    ][14445] Executing state cmd.run for [a2enmod rewrite]
2019-02-05 18:09:50,897 [salt.state       :300 ][INFO    ][14445] /etc/apache2/mods-enabled/rewrite.load exists
2019-02-05 18:09:50,898 [salt.state       :1951][INFO    ][14445] Completed state [a2enmod rewrite] at time 18:09:50.897974 duration_in_ms=0.883
2019-02-05 18:09:50,898 [salt.state       :1780][INFO    ][14445] Running state [libapache2-mod-wsgi] at time 18:09:50.898431
2019-02-05 18:09:50,898 [salt.state       :1813][INFO    ][14445] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-02-05 18:09:50,908 [salt.state       :300 ][INFO    ][14445] All specified packages are already installed
2019-02-05 18:09:50,908 [salt.state       :1951][INFO    ][14445] Completed state [libapache2-mod-wsgi] at time 18:09:50.908269 duration_in_ms=9.838
2019-02-05 18:09:50,909 [salt.state       :1780][INFO    ][14445] Running state [a2enmod wsgi] at time 18:09:50.909141
2019-02-05 18:09:50,909 [salt.state       :1813][INFO    ][14445] Executing state cmd.run for [a2enmod wsgi]
2019-02-05 18:09:50,909 [salt.state       :300 ][INFO    ][14445] /etc/apache2/mods-enabled/wsgi.load exists
2019-02-05 18:09:50,910 [salt.state       :1951][INFO    ][14445] Completed state [a2enmod wsgi] at time 18:09:50.909949 duration_in_ms=0.808
2019-02-05 18:09:50,916 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 18:09:50.916133
2019-02-05 18:09:50,916 [salt.state       :1813][INFO    ][14445] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-02-05 18:09:51,177 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-02-05 18:09:51,177 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 18:09:51.177564 duration_in_ms=261.429
2019-02-05 18:09:51,177 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 18:09:51.177841
2019-02-05 18:09:51,178 [salt.state       :1813][INFO    ][14445] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-02-05 18:09:51,178 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-02-05 18:09:51,178 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 18:09:51.178688 duration_in_ms=0.847
2019-02-05 18:09:51,178 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 18:09:51.178920
2019-02-05 18:09:51,179 [salt.state       :1813][INFO    ][14445] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-02-05 18:09:51,179 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-02-05 18:09:51,179 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 18:09:51.179646 duration_in_ms=0.726
2019-02-05 18:09:51,180 [salt.state       :1780][INFO    ][14445] Running state [a2enmod mpm_prefork] at time 18:09:51.180393
2019-02-05 18:09:51,181 [salt.state       :1813][INFO    ][14445] Executing state cmd.run for [a2enmod mpm_prefork]
2019-02-05 18:09:51,181 [salt.state       :300 ][INFO    ][14445] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-02-05 18:09:51,181 [salt.state       :1951][INFO    ][14445] Completed state [a2enmod mpm_prefork] at time 18:09:51.181553 duration_in_ms=1.159
2019-02-05 18:09:51,181 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 18:09:51.181793
2019-02-05 18:09:51,182 [salt.state       :1813][INFO    ][14445] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-02-05 18:09:51,182 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-02-05 18:09:51,182 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 18:09:51.182519 duration_in_ms=0.726
2019-02-05 18:09:51,182 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 18:09:51.182745
2019-02-05 18:09:51,182 [salt.state       :1813][INFO    ][14445] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-02-05 18:09:51,183 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-02-05 18:09:51,183 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 18:09:51.183453 duration_in_ms=0.708
2019-02-05 18:09:51,184 [salt.state       :1780][INFO    ][14445] Running state [apache_server_service_task] at time 18:09:51.184374
2019-02-05 18:09:51,184 [salt.state       :1813][INFO    ][14445] Executing state test.show_notification for [apache_server_service_task]
2019-02-05 18:09:51,185 [salt.state       :300 ][INFO    ][14445] Running apache.server.service
2019-02-05 18:09:51,185 [salt.state       :1951][INFO    ][14445] Completed state [apache_server_service_task] at time 18:09:51.185246 duration_in_ms=0.872
2019-02-05 18:09:51,185 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/ports.conf] at time 18:09:51.185701
2019-02-05 18:09:51,185 [salt.state       :1813][INFO    ][14445] Executing state file.managed for [/etc/apache2/ports.conf]
2019-02-05 18:09:51,270 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/ports.conf is in the correct state
2019-02-05 18:09:51,271 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/ports.conf] at time 18:09:51.271311 duration_in_ms=85.609
2019-02-05 18:09:51,272 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/conf-available/security.conf] at time 18:09:51.272053
2019-02-05 18:09:51,273 [salt.state       :1813][INFO    ][14445] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-02-05 18:09:51,349 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/conf-available/security.conf is in the correct state
2019-02-05 18:09:51,349 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/conf-available/security.conf] at time 18:09:51.349544 duration_in_ms=77.491
2019-02-05 18:09:51,356 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 18:09:51.356405
2019-02-05 18:09:51,357 [salt.state       :1813][INFO    ][14445] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-02-05 18:09:51,357 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-02-05 18:09:51,357 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 18:09:51.357885 duration_in_ms=1.48
2019-02-05 18:09:51,358 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 18:09:51.358345
2019-02-05 18:09:51,358 [salt.state       :1813][INFO    ][14445] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-02-05 18:09:51,619 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-02-05 18:09:51,619 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 18:09:51.619423 duration_in_ms=261.077
2019-02-05 18:09:51,620 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 18:09:51.620064
2019-02-05 18:09:51,620 [salt.state       :1813][INFO    ][14445] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-02-05 18:09:51,874 [salt.state       :300 ][INFO    ][14445] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-02-05 18:09:51,875 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 18:09:51.874970 duration_in_ms=254.906
2019-02-05 18:09:51,876 [salt.state       :1780][INFO    ][14445] Running state [apache2] at time 18:09:51.876879
2019-02-05 18:09:51,877 [salt.state       :1813][INFO    ][14445] Executing state service.running for [apache2]
2019-02-05 18:09:51,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-02-05 18:09:51,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:09:51,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:09:51,969 [salt.state       :300 ][INFO    ][14445] The service apache2 is already running
2019-02-05 18:09:51,971 [salt.state       :1951][INFO    ][14445] Completed state [apache2] at time 18:09:51.970977 duration_in_ms=94.093
2019-02-05 18:09:51,973 [salt.state       :1780][INFO    ][14445] Running state [/etc/apache2/conf-enabled/security.conf] at time 18:09:51.973349
2019-02-05 18:09:51,974 [salt.state       :1813][INFO    ][14445] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-02-05 18:09:51,978 [salt.state       :300 ][INFO    ][14445] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-02-05 18:09:51,979 [salt.state       :1951][INFO    ][14445] Completed state [/etc/apache2/conf-enabled/security.conf] at time 18:09:51.979432 duration_in_ms=6.083
2019-02-05 18:09:51,981 [salt.state       :1780][INFO    ][14445] Running state [panko-api] at time 18:09:51.981758
2019-02-05 18:09:51,982 [salt.state       :1813][INFO    ][14445] Executing state pkg.installed for [panko-api]
2019-02-05 18:09:52,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2019-02-05 18:09:52,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 18:09:54,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:09:54,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2019-02-05 18:10:00,081 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181000062758
2019-02-05 18:10:00,105 [salt.minion      :1432][INFO    ][15368] Starting a new job with PID 15368
2019-02-05 18:10:00,121 [salt.minion      :1711][INFO    ][15368] Returning information for job: 20190205181000062758
2019-02-05 18:10:00,337 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:10:00,393 [salt.state       :300 ][INFO    ][14445] Made the following changes:
'python3-dateutil' changed from 'absent' to '2.6.1-1~u16.04+mcp1'
'python-pankoclient' changed from 'absent' to '0.5.0-2~u16.04+mcp5'
'python3-editor' changed from 'absent' to '0.4-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'python-panko' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'libmatheval1' changed from 'absent' to '1.1.11+dfsg-2'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'panko-common' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python3-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'uwsgi-core' changed from 'absent' to '2.0.12-5ubuntu3.2'
'panko-api' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-oslo.reports' changed from 'absent' to '1.26.0-2~u16.04+mcp'
'python3-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python3-mako' changed from 'absent' to '1.0.3+ds1-1ubuntu1'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'uwsgi-plugin-python' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libjansson4' changed from 'absent' to '2.7-3ubuntu0.1'
'alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'q-text-as-data' changed from 'absent' to '1'

2019-02-05 18:10:00,430 [salt.state       :915 ][INFO    ][14445] Loading fresh modules for state activity
2019-02-05 18:10:00,472 [salt.state       :1951][INFO    ][14445] Completed state [panko-api] at time 18:10:00.472491 duration_in_ms=8490.732
2019-02-05 18:10:00,475 [salt.state       :1780][INFO    ][14445] Running state [panko_ssl_mysql] at time 18:10:00.475496
2019-02-05 18:10:00,475 [salt.state       :1813][INFO    ][14445] Executing state test.show_notification for [panko_ssl_mysql]
2019-02-05 18:10:00,476 [salt.state       :300 ][INFO    ][14445] Running panko._ssl.mysql
2019-02-05 18:10:00,476 [salt.state       :1951][INFO    ][14445] Completed state [panko_ssl_mysql] at time 18:10:00.476346 duration_in_ms=0.85
2019-02-05 18:10:00,479 [salt.state       :1780][INFO    ][14445] Running state [/etc/panko/panko.conf] at time 18:10:00.479766
2019-02-05 18:10:00,480 [salt.state       :1813][INFO    ][14445] Executing state file.managed for [/etc/panko/panko.conf]
2019-02-05 18:10:00,510 [salt.fileclient  :1219][INFO    ][14445] Fetching file from saltenv 'base', ** done ** 'panko/files/rocky/panko.conf.Debian'
2019-02-05 18:10:00,577 [salt.fileclient  :1219][INFO    ][14445] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2019-02-05 18:10:00,604 [salt.fileclient  :1219][INFO    ][14445] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2019-02-05 18:10:00,707 [salt.state       :300 ][INFO    ][14445] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,73 +159,77 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -248,50 +239,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -306,6 +311,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -321,6 +327,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -358,6 +365,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -371,36 +379,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -478,68 +456,115 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2019-02-05 18:10:00,708 [salt.state       :1951][INFO    ][14445] Completed state [/etc/panko/panko.conf] at time 18:10:00.708187 duration_in_ms=228.418
2019-02-05 18:10:00,709 [salt.state       :1780][INFO    ][14445] Running state [panko-dbsync] at time 18:10:00.709150
2019-02-05 18:10:00,709 [salt.state       :1813][INFO    ][14445] Executing state cmd.run for [panko-dbsync]
2019-02-05 18:10:00,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command 'panko-dbsync' in directory '/root'
2019-02-05 18:10:02,480 [salt.state       :300 ][INFO    ][14445] {'pid': 15411, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-02-05 18:10:02,481 [salt.state       :1951][INFO    ][14445] Completed state [panko-dbsync] at time 18:10:02.481592 duration_in_ms=1772.441
2019-02-05 18:10:02,487 [salt.state       :1780][INFO    ][14445] Running state [/usr/bin/panko-expirer --use-syslog] at time 18:10:02.487830
2019-02-05 18:10:02,488 [salt.state       :1813][INFO    ][14445] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2019-02-05 18:10:02,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command 'crontab -u panko -l' in directory '/root'
2019-02-05 18:10:02,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command 'crontab -u panko /tmp/__salt.tmp.nMt5H6' in directory '/root'
2019-02-05 18:10:02,530 [salt.state       :300 ][INFO    ][14445] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2019-02-05 18:10:02,531 [salt.state       :1951][INFO    ][14445] Completed state [/usr/bin/panko-expirer --use-syslog] at time 18:10:02.531178 duration_in_ms=43.345
2019-02-05 18:10:02,541 [salt.state       :1780][INFO    ][14445] Running state [wsgi_panko] at time 18:10:02.541913
2019-02-05 18:10:02,542 [salt.state       :1813][INFO    ][14445] Executing state apache_site.enabled for [wsgi_panko]
2019-02-05 18:10:02,542 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2019-02-05 18:10:02,603 [salt.state       :300 ][INFO    ][14445] {'new': 'wsgi_panko', 'old': None}
2019-02-05 18:10:02,603 [salt.state       :1951][INFO    ][14445] Completed state [wsgi_panko] at time 18:10:02.603558 duration_in_ms=61.642
2019-02-05 18:10:03,185 [salt.state       :1780][INFO    ][14445] Running state [apache2] at time 18:10:03.185210
2019-02-05 18:10:03,185 [salt.state       :1813][INFO    ][14445] Executing state service.running for [apache2]
2019-02-05 18:10:03,186 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:10:03,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:10:03,234 [salt.state       :300 ][INFO    ][14445] The service apache2 is already running
2019-02-05 18:10:03,235 [salt.state       :1951][INFO    ][14445] Completed state [apache2] at time 18:10:03.235000 duration_in_ms=49.787
2019-02-05 18:10:03,235 [salt.state       :1780][INFO    ][14445] Running state [apache2] at time 18:10:03.235717
2019-02-05 18:10:03,238 [salt.state       :1813][INFO    ][14445] Executing state service.mod_watch for [apache2]
2019-02-05 18:10:03,240 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:10:03,259 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14445] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-02-05 18:10:05,571 [salt.state       :300 ][INFO    ][14445] {'apache2': True}
2019-02-05 18:10:05,571 [salt.state       :1951][INFO    ][14445] Completed state [apache2] at time 18:10:05.571774 duration_in_ms=2336.055
2019-02-05 18:10:05,576 [salt.minion      :1711][INFO    ][14445] Returning information for job: 20190205180939815847
2019-02-05 18:10:44,545 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command test.ping with jid 20190205181044530886
2019-02-05 18:10:44,569 [salt.minion      :1432][INFO    ][15582] Starting a new job with PID 15582
2019-02-05 18:10:44,591 [salt.minion      :1711][INFO    ][15582] Returning information for job: 20190205181044530886
2019-02-05 18:10:44,727 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205181044712148
2019-02-05 18:10:44,745 [salt.minion      :1432][INFO    ][15587] Starting a new job with PID 15587
2019-02-05 18:10:52,822 [salt.state       :915 ][INFO    ][15587] Loading fresh modules for state activity
2019-02-05 18:10:52,888 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2019-02-05 18:10:52,926 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2019-02-05 18:10:53,111 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2019-02-05 18:10:53,169 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2019-02-05 18:10:53,234 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2019-02-05 18:10:54,765 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181054747850
2019-02-05 18:10:54,788 [salt.minion      :1432][INFO    ][15623] Starting a new job with PID 15623
2019-02-05 18:10:54,805 [salt.minion      :1711][INFO    ][15623] Returning information for job: 20190205181054747850
2019-02-05 18:10:55,695 [salt.state       :1780][INFO    ][15587] Running state [aodh-api] at time 18:10:55.695174
2019-02-05 18:10:55,695 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [aodh-api]
2019-02-05 18:10:55,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:10:56,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2019-02-05 18:10:56,205 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 18:10:58,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:10:58,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2019-02-05 18:11:04,894 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181104877298
2019-02-05 18:11:04,916 [salt.minion      :1432][INFO    ][16338] Starting a new job with PID 16338
2019-02-05 18:11:04,932 [salt.minion      :1711][INFO    ][16338] Returning information for job: 20190205181104877298
2019-02-05 18:11:14,524 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:11:14,611 [salt.state       :300 ][INFO    ][15587] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'build-essential' changed from 'absent' to '12.1ubuntu2'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'aodh-common' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'make:any' changed from 'absent' to '1'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'python2.7-greenlet' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-aodh' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-142.168'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-oslo.messaging' changed from 'absent' to '8.1.0-1~u16.04+mcp1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'c++-compiler' changed from 'absent' to '1'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'libc-dev' changed from 'absent' to '1'
'python-oslo.service' changed from 'absent' to '1.31.7-1~u16.04+mcp4'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'linux-kernel-headers' changed from 'absent' to '1'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2019-02-05 18:11:14,674 [salt.state       :915 ][INFO    ][15587] Loading fresh modules for state activity
2019-02-05 18:11:14,924 [salt.state       :1951][INFO    ][15587] Completed state [aodh-api] at time 18:11:14.923966 duration_in_ms=19228.792
2019-02-05 18:11:14,930 [salt.state       :1780][INFO    ][15587] Running state [aodh-evaluator] at time 18:11:14.930442
2019-02-05 18:11:14,931 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [aodh-evaluator]
2019-02-05 18:11:16,205 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181115004563
2019-02-05 18:11:16,240 [salt.minion      :1432][INFO    ][21539] Starting a new job with PID 21539
2019-02-05 18:11:16,321 [salt.minion      :1711][INFO    ][21539] Returning information for job: 20190205181115004563
2019-02-05 18:11:16,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:11:16,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2019-02-05 18:11:21,496 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:11:21,595 [salt.state       :300 ][INFO    ][15587] Made the following changes:
'aodh-evaluator' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-02-05 18:11:21,668 [salt.state       :915 ][INFO    ][15587] Loading fresh modules for state activity
2019-02-05 18:11:21,919 [salt.state       :1951][INFO    ][15587] Completed state [aodh-evaluator] at time 18:11:21.919412 duration_in_ms=6988.969
2019-02-05 18:11:21,929 [salt.state       :1780][INFO    ][15587] Running state [aodh-notifier] at time 18:11:21.929187
2019-02-05 18:11:21,933 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [aodh-notifier]
2019-02-05 18:11:23,679 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:11:23,717 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2019-02-05 18:11:25,143 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181125120978
2019-02-05 18:11:25,180 [salt.minion      :1432][INFO    ][21951] Starting a new job with PID 21951
2019-02-05 18:11:25,211 [salt.minion      :1711][INFO    ][21951] Returning information for job: 20190205181125120978
2019-02-05 18:11:26,990 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:11:27,043 [salt.state       :300 ][INFO    ][15587] Made the following changes:
'aodh-notifier' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-02-05 18:11:27,076 [salt.state       :915 ][INFO    ][15587] Loading fresh modules for state activity
2019-02-05 18:11:27,123 [salt.state       :1951][INFO    ][15587] Completed state [aodh-notifier] at time 18:11:27.123100 duration_in_ms=5193.912
2019-02-05 18:11:27,129 [salt.state       :1780][INFO    ][15587] Running state [aodh-listener] at time 18:11:27.129731
2019-02-05 18:11:27,130 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [aodh-listener]
2019-02-05 18:11:28,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:11:28,244 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2019-02-05 18:11:31,498 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:11:31,551 [salt.state       :300 ][INFO    ][15587] Made the following changes:
'aodh-listener' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-02-05 18:11:31,583 [salt.state       :915 ][INFO    ][15587] Loading fresh modules for state activity
2019-02-05 18:11:31,629 [salt.state       :1951][INFO    ][15587] Completed state [aodh-listener] at time 18:11:31.629403 duration_in_ms=4499.671
2019-02-05 18:11:31,636 [salt.state       :1780][INFO    ][15587] Running state [python-aodhclient] at time 18:11:31.636784
2019-02-05 18:11:31,637 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [python-aodhclient]
2019-02-05 18:11:32,715 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:11:32,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2019-02-05 18:11:34,854 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:11:34,920 [salt.state       :300 ][INFO    ][15587] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp3'

2019-02-05 18:11:34,954 [salt.state       :915 ][INFO    ][15587] Loading fresh modules for state activity
2019-02-05 18:11:34,998 [salt.state       :1951][INFO    ][15587] Completed state [python-aodhclient] at time 18:11:34.997957 duration_in_ms=3361.173
2019-02-05 18:11:35,005 [salt.state       :1780][INFO    ][15587] Running state [aodh_ssl_mysql] at time 18:11:35.005448
2019-02-05 18:11:35,006 [salt.state       :1813][INFO    ][15587] Executing state test.show_notification for [aodh_ssl_mysql]
2019-02-05 18:11:35,006 [salt.state       :300 ][INFO    ][15587] Running aodh._ssl.mysql
2019-02-05 18:11:35,007 [salt.state       :1951][INFO    ][15587] Completed state [aodh_ssl_mysql] at time 18:11:35.007179 duration_in_ms=1.731
2019-02-05 18:11:35,007 [salt.state       :1780][INFO    ][15587] Running state [aodh_ssl_rabbitmq] at time 18:11:35.007901
2019-02-05 18:11:35,008 [salt.state       :1813][INFO    ][15587] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2019-02-05 18:11:35,009 [salt.state       :300 ][INFO    ][15587] Running aodh._ssl.rabbitmq
2019-02-05 18:11:35,009 [salt.state       :1951][INFO    ][15587] Completed state [aodh_ssl_rabbitmq] at time 18:11:35.009573 duration_in_ms=1.672
2019-02-05 18:11:35,010 [salt.state       :1780][INFO    ][15587] Running state [/etc/aodh/aodh.conf] at time 18:11:35.010614
2019-02-05 18:11:35,011 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/aodh/aodh.conf]
2019-02-05 18:11:35,054 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/aodh.conf.Debian'
2019-02-05 18:11:35,145 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2019-02-05 18:11:35,297 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2019-02-05 18:11:35,317 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2019-02-05 18:11:35,385 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2019-02-05 18:11:35,434 [salt.state       :300 ][INFO    ][15587] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,55 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +133,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +144,84 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+rpc_thread_pool_size = 5
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +232,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +368,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-rFNLA3/aodh-7.0.0/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +381,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +403,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +422,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +431,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,71 +443,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -532,32 +521,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -571,36 +567,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -615,6 +1125,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -630,6 +1141,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -667,6 +1179,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -680,36 +1193,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -787,862 +1270,112 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2019-02-05 18:11:35,444 [salt.state       :1951][INFO    ][15587] Completed state [/etc/aodh/aodh.conf] at time 18:11:35.444071 duration_in_ms=433.456
2019-02-05 18:11:35,445 [salt.state       :1780][INFO    ][15587] Running state [aodh-dbsync] at time 18:11:35.445767
2019-02-05 18:11:35,446 [salt.state       :1813][INFO    ][15587] Executing state cmd.run for [aodh-dbsync]
2019-02-05 18:11:35,460 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command 'aodh-dbsync' in directory '/root'
2019-02-05 18:11:35,718 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181135289572
2019-02-05 18:11:35,775 [salt.minion      :1432][INFO    ][22570] Starting a new job with PID 22570
2019-02-05 18:11:35,831 [salt.minion      :1711][INFO    ][22570] Returning information for job: 20190205181135289572
2019-02-05 18:11:37,988 [salt.state       :300 ][INFO    ][15587] {'pid': 22565, 'retcode': 0, 'stderr': '', 'stdout': '2019-02-05 18:11:37.763 22566 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\x1b[00m\n2019-02-05 18:11:37.764 22566 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.\x1b[00m'}
2019-02-05 18:11:37,989 [salt.state       :1951][INFO    ][15587] Completed state [aodh-dbsync] at time 18:11:37.989405 duration_in_ms=2543.636
2019-02-05 18:11:37,997 [salt.state       :1780][INFO    ][15587] Running state [apache2] at time 18:11:37.997668
2019-02-05 18:11:37,998 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [apache2]
2019-02-05 18:11:39,026 [salt.state       :300 ][INFO    ][15587] All specified packages are already installed
2019-02-05 18:11:39,027 [salt.state       :1951][INFO    ][15587] Completed state [apache2] at time 18:11:39.027451 duration_in_ms=1029.782
2019-02-05 18:11:39,027 [salt.state       :1780][INFO    ][15587] Running state [openssl] at time 18:11:39.027919
2019-02-05 18:11:39,028 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [openssl]
2019-02-05 18:11:39,040 [salt.state       :300 ][INFO    ][15587] All specified packages are already installed
2019-02-05 18:11:39,040 [salt.state       :1951][INFO    ][15587] Completed state [openssl] at time 18:11:39.040323 duration_in_ms=12.404
2019-02-05 18:11:39,041 [salt.state       :1780][INFO    ][15587] Running state [a2enmod rewrite] at time 18:11:39.041892
2019-02-05 18:11:39,042 [salt.state       :1813][INFO    ][15587] Executing state cmd.run for [a2enmod rewrite]
2019-02-05 18:11:39,042 [salt.state       :300 ][INFO    ][15587] /etc/apache2/mods-enabled/rewrite.load exists
2019-02-05 18:11:39,043 [salt.state       :1951][INFO    ][15587] Completed state [a2enmod rewrite] at time 18:11:39.043089 duration_in_ms=1.197
2019-02-05 18:11:39,043 [salt.state       :1780][INFO    ][15587] Running state [libapache2-mod-wsgi] at time 18:11:39.043737
2019-02-05 18:11:39,044 [salt.state       :1813][INFO    ][15587] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-02-05 18:11:39,054 [salt.state       :300 ][INFO    ][15587] All specified packages are already installed
2019-02-05 18:11:39,054 [salt.state       :1951][INFO    ][15587] Completed state [libapache2-mod-wsgi] at time 18:11:39.054948 duration_in_ms=11.211
2019-02-05 18:11:39,055 [salt.state       :1780][INFO    ][15587] Running state [a2enmod wsgi] at time 18:11:39.055583
2019-02-05 18:11:39,055 [salt.state       :1813][INFO    ][15587] Executing state cmd.run for [a2enmod wsgi]
2019-02-05 18:11:39,056 [salt.state       :300 ][INFO    ][15587] /etc/apache2/mods-enabled/wsgi.load exists
2019-02-05 18:11:39,056 [salt.state       :1951][INFO    ][15587] Completed state [a2enmod wsgi] at time 18:11:39.056712 duration_in_ms=1.129
2019-02-05 18:11:39,059 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 18:11:39.059409
2019-02-05 18:11:39,059 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-02-05 18:11:39,136 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-02-05 18:11:39,137 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 18:11:39.137279 duration_in_ms=77.869
2019-02-05 18:11:39,137 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 18:11:39.137620
2019-02-05 18:11:39,137 [salt.state       :1813][INFO    ][15587] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-02-05 18:11:39,138 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-02-05 18:11:39,138 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 18:11:39.138731 duration_in_ms=1.111
2019-02-05 18:11:39,139 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 18:11:39.139057
2019-02-05 18:11:39,139 [salt.state       :1813][INFO    ][15587] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-02-05 18:11:39,139 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-02-05 18:11:39,140 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 18:11:39.140063 duration_in_ms=1.006
2019-02-05 18:11:39,141 [salt.state       :1780][INFO    ][15587] Running state [a2enmod mpm_prefork] at time 18:11:39.141510
2019-02-05 18:11:39,141 [salt.state       :1813][INFO    ][15587] Executing state cmd.run for [a2enmod mpm_prefork]
2019-02-05 18:11:39,142 [salt.state       :300 ][INFO    ][15587] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-02-05 18:11:39,142 [salt.state       :1951][INFO    ][15587] Completed state [a2enmod mpm_prefork] at time 18:11:39.142604 duration_in_ms=1.094
2019-02-05 18:11:39,142 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 18:11:39.142934
2019-02-05 18:11:39,143 [salt.state       :1813][INFO    ][15587] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-02-05 18:11:39,143 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-02-05 18:11:39,143 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 18:11:39.143923 duration_in_ms=0.99
2019-02-05 18:11:39,144 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 18:11:39.144251
2019-02-05 18:11:39,145 [salt.state       :1813][INFO    ][15587] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-02-05 18:11:39,145 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-02-05 18:11:39,145 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 18:11:39.145923 duration_in_ms=1.672
2019-02-05 18:11:39,146 [salt.state       :1780][INFO    ][15587] Running state [apache_server_service_task] at time 18:11:39.146246
2019-02-05 18:11:39,146 [salt.state       :1813][INFO    ][15587] Executing state test.show_notification for [apache_server_service_task]
2019-02-05 18:11:39,146 [salt.state       :300 ][INFO    ][15587] Running apache.server.service
2019-02-05 18:11:39,147 [salt.state       :1951][INFO    ][15587] Completed state [apache_server_service_task] at time 18:11:39.147231 duration_in_ms=0.985
2019-02-05 18:11:39,147 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/ports.conf] at time 18:11:39.147854
2019-02-05 18:11:39,148 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/apache2/ports.conf]
2019-02-05 18:11:39,225 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/ports.conf is in the correct state
2019-02-05 18:11:39,225 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/ports.conf] at time 18:11:39.225721 duration_in_ms=77.867
2019-02-05 18:11:39,226 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/conf-available/security.conf] at time 18:11:39.226356
2019-02-05 18:11:39,226 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-02-05 18:11:39,320 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/conf-available/security.conf is in the correct state
2019-02-05 18:11:39,320 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/conf-available/security.conf] at time 18:11:39.320749 duration_in_ms=94.393
2019-02-05 18:11:39,329 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 18:11:39.329872
2019-02-05 18:11:39,330 [salt.state       :1813][INFO    ][15587] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-02-05 18:11:39,330 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-02-05 18:11:39,330 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 18:11:39.330936 duration_in_ms=1.064
2019-02-05 18:11:39,331 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 18:11:39.331624
2019-02-05 18:11:39,332 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-02-05 18:11:39,601 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-02-05 18:11:39,602 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 18:11:39.602224 duration_in_ms=270.6
2019-02-05 18:11:39,603 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 18:11:39.602986
2019-02-05 18:11:39,603 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-02-05 18:11:39,865 [salt.state       :300 ][INFO    ][15587] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-02-05 18:11:39,865 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 18:11:39.865578 duration_in_ms=262.592
2019-02-05 18:11:39,868 [salt.state       :1780][INFO    ][15587] Running state [apache2] at time 18:11:39.868492
2019-02-05 18:11:39,868 [salt.state       :1813][INFO    ][15587] Executing state service.running for [apache2]
2019-02-05 18:11:39,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-02-05 18:11:39,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:11:39,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:11:39,949 [salt.state       :300 ][INFO    ][15587] The service apache2 is already running
2019-02-05 18:11:39,950 [salt.state       :1951][INFO    ][15587] Completed state [apache2] at time 18:11:39.950359 duration_in_ms=81.864
2019-02-05 18:11:39,952 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/conf-enabled/security.conf] at time 18:11:39.952281
2019-02-05 18:11:39,953 [salt.state       :1813][INFO    ][15587] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-02-05 18:11:39,956 [salt.state       :300 ][INFO    ][15587] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-02-05 18:11:39,957 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/conf-enabled/security.conf] at time 18:11:39.957171 duration_in_ms=4.889
2019-02-05 18:11:39,958 [salt.state       :1780][INFO    ][15587] Running state [/etc/default/aodh-evaluator] at time 18:11:39.958023
2019-02-05 18:11:39,958 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/default/aodh-evaluator]
2019-02-05 18:11:39,984 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2019-02-05 18:11:39,998 [salt.state       :300 ][INFO    ][15587] File changed:
New file
2019-02-05 18:11:39,998 [salt.state       :1951][INFO    ][15587] Completed state [/etc/default/aodh-evaluator] at time 18:11:39.998501 duration_in_ms=40.478
2019-02-05 18:11:39,999 [salt.state       :1780][INFO    ][15587] Running state [/etc/default/aodh-notifier] at time 18:11:39.999162
2019-02-05 18:11:39,999 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/default/aodh-notifier]
2019-02-05 18:11:40,027 [salt.state       :300 ][INFO    ][15587] File changed:
New file
2019-02-05 18:11:40,027 [salt.state       :1951][INFO    ][15587] Completed state [/etc/default/aodh-notifier] at time 18:11:40.027677 duration_in_ms=28.514
2019-02-05 18:11:40,028 [salt.state       :1780][INFO    ][15587] Running state [/etc/default/aodh-listener] at time 18:11:40.028405
2019-02-05 18:11:40,028 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/default/aodh-listener]
2019-02-05 18:11:40,056 [salt.state       :300 ][INFO    ][15587] File changed:
New file
2019-02-05 18:11:40,057 [salt.state       :1951][INFO    ][15587] Completed state [/etc/default/aodh-listener] at time 18:11:40.057304 duration_in_ms=28.899
2019-02-05 18:11:40,058 [salt.state       :1780][INFO    ][15587] Running state [/usr/bin/aodh-expirer] at time 18:11:40.058950
2019-02-05 18:11:40,059 [salt.state       :1813][INFO    ][15587] Executing state cron.present for [/usr/bin/aodh-expirer]
2019-02-05 18:11:40,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command 'crontab -u aodh -l' in directory '/root'
2019-02-05 18:11:40,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command 'crontab -u aodh /tmp/__salt.tmp.Vv60Pu' in directory '/root'
2019-02-05 18:11:40,098 [salt.state       :300 ][INFO    ][15587] {'aodh': '/usr/bin/aodh-expirer'}
2019-02-05 18:11:40,098 [salt.state       :1951][INFO    ][15587] Completed state [/usr/bin/aodh-expirer] at time 18:11:40.098645 duration_in_ms=39.694
2019-02-05 18:11:40,099 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 18:11:40.099819
2019-02-05 18:11:40,100 [salt.state       :1813][INFO    ][15587] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2019-02-05 18:11:40,128 [salt.fileclient  :1219][INFO    ][15587] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/apache-aodh.apache2.conf.Debian'
2019-02-05 18:11:40,179 [salt.state       :300 ][INFO    ][15587] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2019-02-05 18:11:40,180 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 18:11:40.180638 duration_in_ms=80.819
2019-02-05 18:11:40,181 [salt.state       :1780][INFO    ][15587] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 18:11:40.181006
2019-02-05 18:11:40,181 [salt.state       :1813][INFO    ][15587] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2019-02-05 18:11:40,183 [salt.state       :300 ][INFO    ][15587] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2019-02-05 18:11:40,183 [salt.state       :1951][INFO    ][15587] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 18:11:40.183542 duration_in_ms=2.536
2019-02-05 18:11:40,184 [salt.state       :1780][INFO    ][15587] Running state [apache2] at time 18:11:40.184864
2019-02-05 18:11:40,185 [salt.state       :1813][INFO    ][15587] Executing state service.running for [apache2]
2019-02-05 18:11:40,186 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:11:40,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-02-05 18:11:40,228 [salt.state       :300 ][INFO    ][15587] The service apache2 is already running
2019-02-05 18:11:40,229 [salt.state       :1951][INFO    ][15587] Completed state [apache2] at time 18:11:40.229107 duration_in_ms=44.24
2019-02-05 18:11:40,229 [salt.state       :1780][INFO    ][15587] Running state [apache2] at time 18:11:40.229673
2019-02-05 18:11:40,230 [salt.state       :1813][INFO    ][15587] Executing state service.mod_watch for [apache2]
2019-02-05 18:11:40,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-02-05 18:11:40,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-02-05 18:11:42,615 [salt.state       :300 ][INFO    ][15587] {'apache2': True}
2019-02-05 18:11:42,617 [salt.state       :1951][INFO    ][15587] Completed state [apache2] at time 18:11:42.617581 duration_in_ms=2387.906
2019-02-05 18:11:42,622 [salt.state       :1780][INFO    ][15587] Running state [aodh-evaluator] at time 18:11:42.622554
2019-02-05 18:11:42,623 [salt.state       :1813][INFO    ][15587] Executing state service.running for [aodh-evaluator]
2019-02-05 18:11:42,624 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2019-02-05 18:11:42,647 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-02-05 18:11:42,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2019-02-05 18:11:42,691 [salt.state       :300 ][INFO    ][15587] The service aodh-evaluator is already running
2019-02-05 18:11:42,691 [salt.state       :1951][INFO    ][15587] Completed state [aodh-evaluator] at time 18:11:42.691897 duration_in_ms=69.34
2019-02-05 18:11:42,692 [salt.state       :1780][INFO    ][15587] Running state [aodh-evaluator] at time 18:11:42.692268
2019-02-05 18:11:42,693 [salt.state       :1813][INFO    ][15587] Executing state service.mod_watch for [aodh-evaluator]
2019-02-05 18:11:42,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-02-05 18:11:42,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2019-02-05 18:11:42,869 [salt.state       :300 ][INFO    ][15587] {'aodh-evaluator': True}
2019-02-05 18:11:42,870 [salt.state       :1951][INFO    ][15587] Completed state [aodh-evaluator] at time 18:11:42.870099 duration_in_ms=177.828
2019-02-05 18:11:42,872 [salt.state       :1780][INFO    ][15587] Running state [aodh-notifier] at time 18:11:42.872067
2019-02-05 18:11:42,872 [salt.state       :1813][INFO    ][15587] Executing state service.running for [aodh-notifier]
2019-02-05 18:11:42,884 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2019-02-05 18:11:42,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-02-05 18:11:42,969 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2019-02-05 18:11:42,998 [salt.state       :300 ][INFO    ][15587] The service aodh-notifier is already running
2019-02-05 18:11:42,998 [salt.state       :1951][INFO    ][15587] Completed state [aodh-notifier] at time 18:11:42.998666 duration_in_ms=126.595
2019-02-05 18:11:42,999 [salt.state       :1780][INFO    ][15587] Running state [aodh-notifier] at time 18:11:42.998990
2019-02-05 18:11:42,999 [salt.state       :1813][INFO    ][15587] Executing state service.mod_watch for [aodh-notifier]
2019-02-05 18:11:43,000 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-02-05 18:11:43,043 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2019-02-05 18:11:45,527 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181145508845
2019-02-05 18:11:45,550 [salt.minion      :1432][INFO    ][22833] Starting a new job with PID 22833
2019-02-05 18:11:45,572 [salt.minion      :1711][INFO    ][22833] Returning information for job: 20190205181145508845
2019-02-05 18:11:55,663 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181155645448
2019-02-05 18:11:55,685 [salt.minion      :1432][INFO    ][22865] Starting a new job with PID 22865
2019-02-05 18:11:55,705 [salt.minion      :1711][INFO    ][22865] Returning information for job: 20190205181155645448
2019-02-05 18:11:58,150 [salt.state       :300 ][INFO    ][15587] {'aodh-notifier': True}
2019-02-05 18:11:58,150 [salt.state       :1951][INFO    ][15587] Completed state [aodh-notifier] at time 18:11:58.150623 duration_in_ms=15151.628
2019-02-05 18:11:58,152 [salt.state       :1780][INFO    ][15587] Running state [aodh-listener] at time 18:11:58.152633
2019-02-05 18:11:58,154 [salt.state       :1813][INFO    ][15587] Executing state service.running for [aodh-listener]
2019-02-05 18:11:58,155 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2019-02-05 18:11:58,180 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-02-05 18:11:58,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2019-02-05 18:11:58,224 [salt.state       :300 ][INFO    ][15587] The service aodh-listener is already running
2019-02-05 18:11:58,225 [salt.state       :1951][INFO    ][15587] Completed state [aodh-listener] at time 18:11:58.224950 duration_in_ms=72.314
2019-02-05 18:11:58,225 [salt.state       :1780][INFO    ][15587] Running state [aodh-listener] at time 18:11:58.225549
2019-02-05 18:11:58,226 [salt.state       :1813][INFO    ][15587] Executing state service.mod_watch for [aodh-listener]
2019-02-05 18:11:58,227 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-02-05 18:11:58,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15587] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2019-02-05 18:12:05,801 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181205783175
2019-02-05 18:12:05,823 [salt.minion      :1432][INFO    ][22924] Starting a new job with PID 22924
2019-02-05 18:12:05,842 [salt.minion      :1711][INFO    ][22924] Returning information for job: 20190205181205783175
2019-02-05 18:12:13,394 [salt.state       :300 ][INFO    ][15587] {'aodh-listener': True}
2019-02-05 18:12:13,394 [salt.state       :1951][INFO    ][15587] Completed state [aodh-listener] at time 18:12:13.394659 duration_in_ms=15169.107
2019-02-05 18:12:13,407 [salt.minion      :1711][INFO    ][15587] Returning information for job: 20190205181044712148
2019-02-05 18:14:57,238 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command state.sls with jid 20190205181457223704
2019-02-05 18:14:57,261 [salt.minion      :1432][INFO    ][22986] Starting a new job with PID 22986
2019-02-05 18:15:05,292 [salt.state       :915 ][INFO    ][22986] Loading fresh modules for state activity
2019-02-05 18:15:05,357 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2019-02-05 18:15:05,395 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2019-02-05 18:15:05,467 [salt.utils.schedule:1377][INFO    ][1559] Running scheduled job: __mine_interval
2019-02-05 18:15:05,585 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2019-02-05 18:15:07,293 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181507274817
2019-02-05 18:15:07,312 [salt.minion      :1432][INFO    ][23012] Starting a new job with PID 23012
2019-02-05 18:15:07,330 [salt.minion      :1711][INFO    ][23012] Returning information for job: 20190205181507274817
2019-02-05 18:15:07,592 [salt.state       :1780][INFO    ][22986] Running state [ceilometer-agent-central] at time 18:15:07.592388
2019-02-05 18:15:07,593 [salt.state       :1813][INFO    ][22986] Executing state pkg.installed for [ceilometer-agent-central]
2019-02-05 18:15:07,594 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:15:08,055 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2019-02-05 18:15:08,151 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-02-05 18:15:10,133 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:15:10,170 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2019-02-05 18:15:17,488 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181517465130
2019-02-05 18:15:17,512 [salt.minion      :1432][INFO    ][24004] Starting a new job with PID 24004
2019-02-05 18:15:17,531 [salt.minion      :1711][INFO    ][24004] Returning information for job: 20190205181517465130
2019-02-05 18:15:27,707 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181527687272
2019-02-05 18:15:27,726 [salt.minion      :1432][INFO    ][25339] Starting a new job with PID 25339
2019-02-05 18:15:27,760 [salt.minion      :1711][INFO    ][25339] Returning information for job: 20190205181527687272
2019-02-05 18:15:29,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:15:29,726 [salt.state       :300 ][INFO    ][22986] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-pysmi' changed from 'absent' to '0.2.2-2~u16.04+mcp'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.4'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2ubuntu0.16.04.1'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.4.3-1~u16.04+mcp'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-oslo-rootwrap' changed from 'absent' to '1'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.3'
'python-ceilometer' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-pycryptodome' changed from 'absent' to '3.4.7-1.1~u16.04+mcp'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2019-02-05 18:15:29,763 [salt.state       :915 ][INFO    ][22986] Loading fresh modules for state activity
2019-02-05 18:15:29,981 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer-agent-central] at time 18:15:29.981545 duration_in_ms=22389.157
2019-02-05 18:15:29,992 [salt.state       :1780][INFO    ][22986] Running state [python-ceilometerclient] at time 18:15:29.992579
2019-02-05 18:15:29,993 [salt.state       :1813][INFO    ][22986] Executing state pkg.installed for [python-ceilometerclient]
2019-02-05 18:15:30,839 [salt.state       :300 ][INFO    ][22986] All specified packages are already installed
2019-02-05 18:15:30,840 [salt.state       :1951][INFO    ][22986] Completed state [python-ceilometerclient] at time 18:15:30.840374 duration_in_ms=847.795
2019-02-05 18:15:30,841 [salt.state       :1780][INFO    ][22986] Running state [ceilometer-agent-notification] at time 18:15:30.841060
2019-02-05 18:15:30,841 [salt.state       :1813][INFO    ][22986] Executing state pkg.installed for [ceilometer-agent-notification]
2019-02-05 18:15:30,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-02-05 18:15:30,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2019-02-05 18:15:34,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-02-05 18:15:34,190 [salt.state       :300 ][INFO    ][22986] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'

2019-02-05 18:15:34,223 [salt.state       :915 ][INFO    ][22986] Loading fresh modules for state activity
2019-02-05 18:15:34,268 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer-agent-notification] at time 18:15:34.268313 duration_in_ms=3427.252
2019-02-05 18:15:34,273 [salt.state       :1780][INFO    ][22986] Running state [ceilometer_ssl_rabbitmq] at time 18:15:34.273262
2019-02-05 18:15:34,273 [salt.state       :1813][INFO    ][22986] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2019-02-05 18:15:34,274 [salt.state       :300 ][INFO    ][22986] Running ceilometer._ssl.rabbitmq
2019-02-05 18:15:34,274 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer_ssl_rabbitmq] at time 18:15:34.274892 duration_in_ms=1.631
2019-02-05 18:15:34,278 [salt.state       :1780][INFO    ][22986] Running state [/etc/ceilometer/ceilometer.conf] at time 18:15:34.278103
2019-02-05 18:15:34,278 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2019-02-05 18:15:34,317 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/ceilometer-server.conf.Debian'
2019-02-05 18:15:34,631 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2019-02-05 18:15:34,753 [salt.state       :300 ][INFO    ][22986] File changed:
--- 
+++ 
@@ -1,15 +1,330 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: To reduce polling agent load, samples are sent to the
-# notification agent in a batch. To gain higher throughput at the cost of load
-# set this to False. This option is deprecated, to disable batching set
-# batch_size = 0 in the polling group. (boolean value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
 #batch_polled_samples = true
 
 # Inspector to use for inspecting the hypervisor layer. Known inspectors are
@@ -70,372 +385,6 @@
 # Minimum value: 1
 #max_parallel_requests = 64
 
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
 
 [coordination]
 
@@ -448,6 +397,7 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
@@ -529,52 +479,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -593,7 +497,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-yNzi7g/ceilometer-11.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -619,6 +523,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -636,6 +541,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -666,633 +572,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1307,10 +586,6 @@
 # pool with the same partitioning_group_prefix a disjoint subset of pollsters
 # should be loaded. (string value)
 #partitioning_group_prefix = <None>
-
-# Batch size of samples to send to notification agent, Set to 0 to disable
-# (integer value)
-#batch_size = 50
 
 
 [publisher]
@@ -1325,6 +600,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1357,87 +633,115 @@
 #secret_key = <None>
 
 
-[rgw_client]
-
-#
-# From ceilometer
-#
-
-# Whether RGW uses implicit tenants or not. (boolean value)
-#implicit_tenants = false
-
-
 [service_credentials]
 
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1450,7 +754,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1485,58 +789,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (host address value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25

2019-02-05 18:15:34,762 [salt.state       :1951][INFO    ][22986] Completed state [/etc/ceilometer/ceilometer.conf] at time 18:15:34.761920 duration_in_ms=483.816
2019-02-05 18:15:34,762 [salt.state       :1780][INFO    ][22986] Running state [/etc/default/ceilometer-agent-central] at time 18:15:34.762434
2019-02-05 18:15:34,762 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2019-02-05 18:15:34,799 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2019-02-05 18:15:34,831 [salt.state       :300 ][INFO    ][22986] File changed:
New file
2019-02-05 18:15:34,832 [salt.state       :1951][INFO    ][22986] Completed state [/etc/default/ceilometer-agent-central] at time 18:15:34.832106 duration_in_ms=69.669
2019-02-05 18:15:34,845 [salt.state       :1780][INFO    ][22986] Running state [/etc/default/ceilometer-agent-notification] at time 18:15:34.832521
2019-02-05 18:15:34,845 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2019-02-05 18:15:34,898 [salt.state       :300 ][INFO    ][22986] File changed:
New file
2019-02-05 18:15:34,898 [salt.state       :1951][INFO    ][22986] Completed state [/etc/default/ceilometer-agent-notification] at time 18:15:34.898951 duration_in_ms=66.43
2019-02-05 18:15:34,925 [salt.state       :1780][INFO    ][22986] Running state [python-gnocchiclient] at time 18:15:34.925321
2019-02-05 18:15:34,927 [salt.state       :1813][INFO    ][22986] Executing state pkg.latest for [python-gnocchiclient]
2019-02-05 18:15:34,972 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2019-02-05 18:15:35,174 [salt.state       :300 ][INFO    ][22986] Package python-gnocchiclient is already up-to-date
2019-02-05 18:15:35,175 [salt.state       :1951][INFO    ][22986] Completed state [python-gnocchiclient] at time 18:15:35.175253 duration_in_ms=249.93
2019-02-05 18:15:35,183 [salt.state       :1780][INFO    ][22986] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 18:15:35.182290
2019-02-05 18:15:35,185 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2019-02-05 18:15:35,242 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gnocchi_resources.yaml'
2019-02-05 18:15:35,287 [salt.state       :300 ][INFO    ][22986] File changed:
New file
2019-02-05 18:15:35,292 [salt.state       :1951][INFO    ][22986] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 18:15:35.287874 duration_in_ms=105.584
2019-02-05 18:15:35,294 [salt.state       :1780][INFO    ][22986] Running state [ceilometer-upgrade] at time 18:15:35.294600
2019-02-05 18:15:35,298 [salt.state       :1813][INFO    ][22986] Executing state cmd.run for [ceilometer-upgrade]
2019-02-05 18:15:35,299 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command 'ceilometer-upgrade' in directory '/root'
2019-02-05 18:15:37,867 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command saltutil.find_job with jid 20190205181537847939
2019-02-05 18:15:37,887 [salt.minion      :1432][INFO    ][25872] Starting a new job with PID 25872
2019-02-05 18:15:37,918 [salt.minion      :1711][INFO    ][25872] Returning information for job: 20190205181537847939
2019-02-05 18:15:45,829 [salt.state       :300 ][INFO    ][22986] {'pid': 25855, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-02-05 18:15:45,830 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer-upgrade] at time 18:15:45.830718 duration_in_ms=10536.117
2019-02-05 18:15:45,831 [salt.state       :1780][INFO    ][22986] Running state [/etc/ceilometer/pipeline.yaml] at time 18:15:45.831677
2019-02-05 18:15:45,832 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2019-02-05 18:15:45,864 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/pipeline.yaml'
2019-02-05 18:15:45,954 [salt.state       :300 ][INFO    ][22986] File changed:
New file
2019-02-05 18:15:45,955 [salt.state       :1951][INFO    ][22986] Completed state [/etc/ceilometer/pipeline.yaml] at time 18:15:45.955189 duration_in_ms=123.511
2019-02-05 18:15:45,955 [salt.state       :1780][INFO    ][22986] Running state [/etc/ceilometer/event_pipeline.yaml] at time 18:15:45.955684
2019-02-05 18:15:45,955 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2019-02-05 18:15:45,979 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_pipeline.yaml'
2019-02-05 18:15:46,043 [salt.state       :300 ][INFO    ][22986] File changed:
New file
2019-02-05 18:15:46,043 [salt.state       :1951][INFO    ][22986] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 18:15:46.043834 duration_in_ms=88.149
2019-02-05 18:15:46,044 [salt.state       :1780][INFO    ][22986] Running state [/etc/ceilometer/event_definitions.yaml] at time 18:15:46.044380
2019-02-05 18:15:46,045 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2019-02-05 18:15:46,069 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_definitions.yaml'
2019-02-05 18:15:46,085 [salt.state       :300 ][INFO    ][22986] File changed:
New file
2019-02-05 18:15:46,085 [salt.state       :1951][INFO    ][22986] Completed state [/etc/ceilometer/event_definitions.yaml] at time 18:15:46.085492 duration_in_ms=41.111
2019-02-05 18:15:46,086 [salt.state       :1780][INFO    ][22986] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 18:15:46.086110
2019-02-05 18:15:46,086 [salt.state       :1813][INFO    ][22986] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2019-02-05 18:15:46,110 [salt.fileclient  :1219][INFO    ][22986] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gabbi_pipeline.yaml'
2019-02-05 18:15:46,125 [salt.state       :300 ][INFO    ][22986] File changed:
New file
2019-02-05 18:15:46,126 [salt.state       :1951][INFO    ][22986] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 18:15:46.125909 duration_in_ms=39.799
2019-02-05 18:15:46,770 [salt.state       :1780][INFO    ][22986] Running state [ceilometer-agent-central] at time 18:15:46.770754
2019-02-05 18:15:46,771 [salt.state       :1813][INFO    ][22986] Executing state service.running for [ceilometer-agent-central]
2019-02-05 18:15:46,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2019-02-05 18:15:46,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-05 18:15:46,823 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-05 18:15:46,843 [salt.state       :300 ][INFO    ][22986] The service ceilometer-agent-central is already running
2019-02-05 18:15:46,843 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer-agent-central] at time 18:15:46.843662 duration_in_ms=72.906
2019-02-05 18:15:46,844 [salt.state       :1780][INFO    ][22986] Running state [ceilometer-agent-central] at time 18:15:46.844080
2019-02-05 18:15:46,845 [salt.state       :1813][INFO    ][22986] Executing state service.mod_watch for [ceilometer-agent-central]
2019-02-05 18:15:46,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-05 18:15:46,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2019-02-05 18:15:47,041 [salt.state       :300 ][INFO    ][22986] {'ceilometer-agent-central': True}
2019-02-05 18:15:47,042 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer-agent-central] at time 18:15:47.042199 duration_in_ms=198.118
2019-02-05 18:15:47,044 [salt.state       :1780][INFO    ][22986] Running state [ceilometer-agent-notification] at time 18:15:47.044102
2019-02-05 18:15:47,045 [salt.state       :1813][INFO    ][22986] Executing state service.running for [ceilometer-agent-notification]
2019-02-05 18:15:47,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2019-02-05 18:15:47,089 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-05 18:15:47,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-05 18:15:47,129 [salt.state       :300 ][INFO    ][22986] The service ceilometer-agent-notification is already running
2019-02-05 18:15:47,129 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer-agent-notification] at time 18:15:47.129641 duration_in_ms=85.535
2019-02-05 18:15:47,130 [salt.state       :1780][INFO    ][22986] Running state [ceilometer-agent-notification] at time 18:15:47.130008
2019-02-05 18:15:47,130 [salt.state       :1813][INFO    ][22986] Executing state service.mod_watch for [ceilometer-agent-notification]
2019-02-05 18:15:47,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-05 18:15:47,149 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22986] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2019-02-05 18:15:47,285 [salt.state       :300 ][INFO    ][22986] {'ceilometer-agent-notification': True}
2019-02-05 18:15:47,286 [salt.state       :1951][INFO    ][22986] Completed state [ceilometer-agent-notification] at time 18:15:47.286120 duration_in_ms=156.109
2019-02-05 18:15:47,301 [salt.minion      :1711][INFO    ][22986] Returning information for job: 20190205181457223704
2019-02-05 18:20:15,809 [salt.minion      :1308][INFO    ][1559] User sudo_ubuntu Executing command cp.push_dir with jid 20190205182015793925
2019-02-05 18:20:15,841 [salt.minion      :1432][INFO    ][26010] Starting a new job with PID 26010
