2019-01-18 23:35:41,797 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:41,912 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:41,914 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:41,916 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:41,918 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,198 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,201 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,203 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,256 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,261 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,263 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,266 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,364 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,391 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,396 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,400 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,404 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,407 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,410 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,414 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,417 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,420 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,423 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,427 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,430 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,433 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,436 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,440 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,443 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,446 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,449 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,453 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,456 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,459 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,462 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,465 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,469 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,472 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,476 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,479 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,482 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,486 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,489 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,493 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,496 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,500 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,503 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,507 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,510 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,514 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,518 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,521 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,525 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,528 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,531 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,534 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:42,538 [salt.utils.decorators:82  ][ERROR   ][1734] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-18 23:35:59,206 [salt.utils.decorators:613 ][WARNING ][1734] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-18 23:36:00,857 [salt.loaded.int.states.file:2298][WARNING ][1734] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:36:02,120 [salt.loaded.int.states.file:2298][WARNING ][1734] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:36:03,969 [salt.loaded.int.states.file:2298][WARNING ][1734] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:36:07,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2966] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2019-01-18 23:36:07,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2966] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2019-01-18 23:36:07,560 [salt.utils.parsers:1051][WARNING ][1366] Minion received a SIGTERM. Exiting.
2019-01-18 23:36:08,410 [salt.cli.daemons :293 ][INFO    ][3025] Setting up the Salt Minion "mdb02.mcp-odl-ha.local"
2019-01-18 23:36:08,507 [salt.cli.daemons :82  ][INFO    ][3025] Starting up the Salt Minion
2019-01-18 23:36:08,508 [salt.utils.event :1017][INFO    ][3025] Starting pull socket on /var/run/salt/minion/minion_event_1babc43147_pull.ipc
2019-01-18 23:36:09,201 [salt.minion      :976 ][INFO    ][3025] Creating minion process manager
2019-01-18 23:36:10,733 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3025] Executing command ['date', '+%z'] in directory '/root'
2019-01-18 23:36:10,753 [salt.utils.schedule:568 ][INFO    ][3025] Updating job settings for scheduled job: __mine_interval
2019-01-18 23:36:10,755 [salt.minion      :1108][INFO    ][3025] Added mine.update to scheduler
2019-01-18 23:36:10,760 [salt.minion      :1975][INFO    ][3025] Minion is starting as user 'root'
2019-01-18 23:36:10,774 [salt.minion      :2336][INFO    ][3025] Minion is ready to receive requests!
2019-01-18 23:36:50,547 [salt.minion      :1308][INFO    ][3025] User sudo_ubuntu Executing command state.apply with jid 20190118233650533138
2019-01-18 23:36:50,564 [salt.minion      :1432][INFO    ][3114] Starting a new job with PID 3114
2019-01-18 23:37:00,585 [salt.minion      :1308][INFO    ][3025] User sudo_ubuntu Executing command saltutil.find_job with jid 20190118233700571884
2019-01-18 23:37:00,605 [salt.minion      :1432][INFO    ][3121] Starting a new job with PID 3121
2019-01-18 23:37:00,627 [salt.minion      :1711][INFO    ][3121] Returning information for job: 20190118233700571884
2019-01-18 23:37:00,864 [salt.state       :915 ][INFO    ][3114] Loading fresh modules for state activity
2019-01-18 23:37:01,299 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2019-01-18 23:37:01,346 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2019-01-18 23:37:01,515 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2019-01-18 23:37:01,639 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2019-01-18 23:37:01,768 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2019-01-18 23:37:01,901 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2019-01-18 23:37:02,046 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2019-01-18 23:37:02,188 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2019-01-18 23:37:02,333 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2019-01-18 23:37:02,522 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2019-01-18 23:37:02,665 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2019-01-18 23:37:02,787 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2019-01-18 23:37:03,005 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2019-01-18 23:37:03,039 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2019-01-18 23:37:03,171 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2019-01-18 23:37:03,305 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2019-01-18 23:37:03,415 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2019-01-18 23:37:03,554 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2019-01-18 23:37:04,503 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2019-01-18 23:37:04,632 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2019-01-18 23:37:04,756 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2019-01-18 23:37:04,914 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2019-01-18 23:37:05,070 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2019-01-18 23:37:05,212 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2019-01-18 23:37:05,348 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2019-01-18 23:37:05,476 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2019-01-18 23:37:05,600 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2019-01-18 23:37:05,803 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2019-01-18 23:37:06,039 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2019-01-18 23:37:06,174 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2019-01-18 23:37:06,312 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2019-01-18 23:37:07,845 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2019-01-18 23:37:07,871 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2019-01-18 23:37:07,916 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2019-01-18 23:37:07,965 [salt.state       :1780][INFO    ][3114] Running state [/etc/environment] at time 23:37:07.965540
2019-01-18 23:37:07,965 [salt.state       :1813][INFO    ][3114] Executing state file.blockreplace for [/etc/environment]
2019-01-18 23:37:07,973 [salt.state       :300 ][INFO    ][3114] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2019-01-18 23:37:07,974 [salt.state       :1951][INFO    ][3114] Completed state [/etc/environment] at time 23:37:07.974696 duration_in_ms=9.156
2019-01-18 23:37:07,974 [salt.state       :1780][INFO    ][3114] Running state [/etc/profile.d] at time 23:37:07.974939
2019-01-18 23:37:07,975 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/profile.d]
2019-01-18 23:37:07,977 [salt.state       :300 ][INFO    ][3114] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2019-01-18 23:37:07,977 [salt.state       :1951][INFO    ][3114] Completed state [/etc/profile.d] at time 23:37:07.977525 duration_in_ms=2.586
2019-01-18 23:37:07,977 [salt.state       :1780][INFO    ][3114] Running state [/etc/bash.bashrc] at time 23:37:07.977746
2019-01-18 23:37:07,977 [salt.state       :1813][INFO    ][3114] Executing state file.blockreplace for [/etc/bash.bashrc]
2019-01-18 23:37:08,713 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['git', '--version'] in directory '/root'
2019-01-18 23:37:08,881 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2019-01-18 23:37:08,900 [salt.state       :300 ][INFO    ][3114] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-01-18 23:37:08,901 [salt.state       :1951][INFO    ][3114] Completed state [/etc/bash.bashrc] at time 23:37:08.901277 duration_in_ms=923.53
2019-01-18 23:37:08,901 [salt.state       :1780][INFO    ][3114] Running state [/etc/profile] at time 23:37:08.901777
2019-01-18 23:37:08,903 [salt.state       :1813][INFO    ][3114] Executing state file.blockreplace for [/etc/profile]
2019-01-18 23:37:08,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'test -f /etc/profile' in directory '/root'
2019-01-18 23:37:08,931 [salt.state       :300 ][INFO    ][3114] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-01-18 23:37:08,931 [salt.state       :1951][INFO    ][3114] Completed state [/etc/profile] at time 23:37:08.931456 duration_in_ms=29.679
2019-01-18 23:37:08,931 [salt.state       :1780][INFO    ][3114] Running state [/etc/login.defs] at time 23:37:08.931746
2019-01-18 23:37:08,932 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/login.defs]
2019-01-18 23:37:08,957 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2019-01-18 23:37:09,074 [salt.state       :300 ][INFO    ][3114] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2019-01-18 23:37:09,075 [salt.state       :1951][INFO    ][3114] Completed state [/etc/login.defs] at time 23:37:09.075459 duration_in_ms=143.712
2019-01-18 23:37:09,086 [salt.state       :1780][INFO    ][3114] Running state [at] at time 23:37:09.086626
2019-01-18 23:37:09,086 [salt.state       :1813][INFO    ][3114] Executing state pkg.installed for [at]
2019-01-18 23:37:09,087 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:37:09,530 [salt.state       :300 ][INFO    ][3114] All specified packages are already installed
2019-01-18 23:37:09,531 [salt.state       :1951][INFO    ][3114] Completed state [at] at time 23:37:09.531317 duration_in_ms=444.69
2019-01-18 23:37:09,533 [salt.state       :1780][INFO    ][3114] Running state [atd] at time 23:37:09.533413
2019-01-18 23:37:09,533 [salt.state       :1813][INFO    ][3114] Executing state service.running for [atd]
2019-01-18 23:37:09,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2019-01-18 23:37:09,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2019-01-18 23:37:09,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2019-01-18 23:37:09,603 [salt.state       :300 ][INFO    ][3114] The service atd is already running
2019-01-18 23:37:09,604 [salt.state       :1951][INFO    ][3114] Completed state [atd] at time 23:37:09.604625 duration_in_ms=71.21
2019-01-18 23:37:09,609 [salt.state       :1780][INFO    ][3114] Running state [cron] at time 23:37:09.609343
2019-01-18 23:37:09,610 [salt.state       :1813][INFO    ][3114] Executing state pkg.installed for [cron]
2019-01-18 23:37:09,619 [salt.state       :300 ][INFO    ][3114] All specified packages are already installed
2019-01-18 23:37:09,619 [salt.state       :1951][INFO    ][3114] Completed state [cron] at time 23:37:09.619496 duration_in_ms=10.153
2019-01-18 23:37:09,620 [salt.state       :1780][INFO    ][3114] Running state [/etc/at.allow] at time 23:37:09.620337
2019-01-18 23:37:09,620 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/at.allow]
2019-01-18 23:37:10,802 [salt.minion      :1308][INFO    ][3025] User sudo_ubuntu Executing command saltutil.find_job with jid 20190118233710788289
2019-01-18 23:37:10,820 [salt.minion      :1432][INFO    ][3213] Starting a new job with PID 3213
2019-01-18 23:37:10,840 [salt.minion      :1711][INFO    ][3213] Returning information for job: 20190118233710788289
2019-01-18 23:37:10,914 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2019-01-18 23:37:10,925 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:10,926 [salt.state       :1951][INFO    ][3114] Completed state [/etc/at.allow] at time 23:37:10.926119 duration_in_ms=1305.781
2019-01-18 23:37:10,926 [salt.state       :1780][INFO    ][3114] Running state [/etc/at.deny] at time 23:37:10.926478
2019-01-18 23:37:10,926 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/at.deny]
2019-01-18 23:37:10,927 [salt.state       :300 ][INFO    ][3114] {'removed': '/etc/at.deny'}
2019-01-18 23:37:10,927 [salt.state       :1951][INFO    ][3114] Completed state [/etc/at.deny] at time 23:37:10.927632 duration_in_ms=1.155
2019-01-18 23:37:10,929 [salt.state       :1780][INFO    ][3114] Running state [cron] at time 23:37:10.928996
2019-01-18 23:37:10,929 [salt.state       :1813][INFO    ][3114] Executing state service.running for [cron]
2019-01-18 23:37:10,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2019-01-18 23:37:10,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2019-01-18 23:37:10,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2019-01-18 23:37:10,977 [salt.state       :300 ][INFO    ][3114] The service cron is already running
2019-01-18 23:37:10,979 [salt.state       :1951][INFO    ][3114] Completed state [cron] at time 23:37:10.979007 duration_in_ms=50.01
2019-01-18 23:37:10,980 [salt.state       :1780][INFO    ][3114] Running state [/etc/cron.allow] at time 23:37:10.980795
2019-01-18 23:37:10,981 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/cron.allow]
2019-01-18 23:37:11,005 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:11,005 [salt.state       :1951][INFO    ][3114] Completed state [/etc/cron.allow] at time 23:37:11.005895 duration_in_ms=25.1
2019-01-18 23:37:11,006 [salt.state       :1780][INFO    ][3114] Running state [/etc/cron.deny] at time 23:37:11.006220
2019-01-18 23:37:11,006 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/cron.deny]
2019-01-18 23:37:11,006 [salt.state       :300 ][INFO    ][3114] File /etc/cron.deny is not present
2019-01-18 23:37:11,007 [salt.state       :1951][INFO    ][3114] Completed state [/etc/cron.deny] at time 23:37:11.007097 duration_in_ms=0.877
2019-01-18 23:37:11,008 [salt.state       :1780][INFO    ][3114] Running state [/etc/crontab] at time 23:37:11.008042
2019-01-18 23:37:11,008 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/crontab]
2019-01-18 23:37:11,009 [salt.state       :300 ][INFO    ][3114] {'mode': '0600'}
2019-01-18 23:37:11,009 [salt.state       :1951][INFO    ][3114] Completed state [/etc/crontab] at time 23:37:11.009534 duration_in_ms=1.492
2019-01-18 23:37:11,010 [salt.state       :1780][INFO    ][3114] Running state [/etc/cron.d] at time 23:37:11.010840
2019-01-18 23:37:11,011 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/cron.d]
2019-01-18 23:37:11,012 [salt.state       :300 ][INFO    ][3114] {'mode': '0600'}
2019-01-18 23:37:11,012 [salt.state       :1951][INFO    ][3114] Completed state [/etc/cron.d] at time 23:37:11.012483 duration_in_ms=1.642
2019-01-18 23:37:11,013 [salt.state       :1780][INFO    ][3114] Running state [/etc/cron.daily] at time 23:37:11.013411
2019-01-18 23:37:11,013 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/cron.daily]
2019-01-18 23:37:11,016 [salt.state       :300 ][INFO    ][3114] {'mode': '0600'}
2019-01-18 23:37:11,016 [salt.state       :1951][INFO    ][3114] Completed state [/etc/cron.daily] at time 23:37:11.016344 duration_in_ms=2.933
2019-01-18 23:37:11,017 [salt.state       :1780][INFO    ][3114] Running state [/etc/cron.hourly] at time 23:37:11.017244
2019-01-18 23:37:11,017 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/cron.hourly]
2019-01-18 23:37:11,018 [salt.state       :300 ][INFO    ][3114] {'mode': '0600'}
2019-01-18 23:37:11,019 [salt.state       :1951][INFO    ][3114] Completed state [/etc/cron.hourly] at time 23:37:11.019156 duration_in_ms=1.912
2019-01-18 23:37:11,020 [salt.state       :1780][INFO    ][3114] Running state [/etc/cron.monthly] at time 23:37:11.020055
2019-01-18 23:37:11,020 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/cron.monthly]
2019-01-18 23:37:11,021 [salt.state       :300 ][INFO    ][3114] {'mode': '0600'}
2019-01-18 23:37:11,021 [salt.state       :1951][INFO    ][3114] Completed state [/etc/cron.monthly] at time 23:37:11.021616 duration_in_ms=1.562
2019-01-18 23:37:11,022 [salt.state       :1780][INFO    ][3114] Running state [/etc/cron.weekly] at time 23:37:11.022653
2019-01-18 23:37:11,022 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/cron.weekly]
2019-01-18 23:37:11,040 [salt.state       :300 ][INFO    ][3114] {'mode': '0600'}
2019-01-18 23:37:11,040 [salt.state       :1951][INFO    ][3114] Completed state [/etc/cron.weekly] at time 23:37:11.040267 duration_in_ms=17.614
2019-01-18 23:37:11,043 [salt.state       :1780][INFO    ][3114] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 23:37:11.043890
2019-01-18 23:37:11,044 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2019-01-18 23:37:11,060 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2019-01-18 23:37:11,077 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:11,077 [salt.state       :1951][INFO    ][3114] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 23:37:11.077658 duration_in_ms=33.767
2019-01-18 23:37:11,078 [salt.state       :1780][INFO    ][3114] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 23:37:11.077952
2019-01-18 23:37:11,078 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2019-01-18 23:37:11,102 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:11,102 [salt.state       :1951][INFO    ][3114] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 23:37:11.102628 duration_in_ms=24.676
2019-01-18 23:37:11,104 [salt.state       :1780][INFO    ][3114] Running state [linux_repo_prereq_pkgs] at time 23:37:11.104561
2019-01-18 23:37:11,104 [salt.state       :1813][INFO    ][3114] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2019-01-18 23:37:11,116 [salt.state       :300 ][INFO    ][3114] All specified packages are already installed
2019-01-18 23:37:11,117 [salt.state       :1951][INFO    ][3114] Completed state [linux_repo_prereq_pkgs] at time 23:37:11.117127 duration_in_ms=12.565
2019-01-18 23:37:11,117 [salt.state       :1780][INFO    ][3114] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 23:37:11.117416
2019-01-18 23:37:11,117 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2019-01-18 23:37:11,118 [salt.state       :300 ][INFO    ][3114] File /etc/apt/apt.conf.d/99proxies-salt is not present
2019-01-18 23:37:11,118 [salt.state       :1951][INFO    ][3114] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 23:37:11.118341 duration_in_ms=0.926
2019-01-18 23:37:11,118 [salt.state       :1780][INFO    ][3114] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 23:37:11.118614
2019-01-18 23:37:11,118 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2019-01-18 23:37:11,119 [salt.state       :300 ][INFO    ][3114] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2019-01-18 23:37:11,119 [salt.state       :1951][INFO    ][3114] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 23:37:11.119466 duration_in_ms=0.853
2019-01-18 23:37:11,119 [salt.state       :1780][INFO    ][3114] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 23:37:11.119714
2019-01-18 23:37:11,119 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2019-01-18 23:37:11,136 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2019-01-18 23:37:11,247 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:11,247 [salt.state       :1951][INFO    ][3114] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 23:37:11.247395 duration_in_ms=127.681
2019-01-18 23:37:11,250 [salt.state       :1780][INFO    ][3114] Running state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 23:37:11.250808
2019-01-18 23:37:11,251 [salt.state       :1813][INFO    ][3114] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main]
2019-01-18 23:37:11,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-rocky/xenial/archive-rocky.key'] in directory '/root'
2019-01-18 23:37:11,707 [salt.state       :300 ][INFO    ][3114] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main'}
2019-01-18 23:37:11,708 [salt.state       :1951][INFO    ][3114] Completed state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 23:37:11.708029 duration_in_ms=457.219
2019-01-18 23:37:11,708 [salt.state       :1780][INFO    ][3114] Running state [pkg.refresh_db] at time 23:37:11.708474
2019-01-18 23:37:11,708 [salt.state       :1813][INFO    ][3114] Executing state module.run for [pkg.refresh_db]
2019-01-18 23:37:11,709 [salt.utils.decorators:613 ][WARNING ][3114] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-18 23:37:11,710 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-18 23:37:15,050 [salt.state       :300 ][INFO    ][3114] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial InRelease': True, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial/main amd64 Packages': True}}
2019-01-18 23:37:15,052 [salt.state       :1951][INFO    ][3114] Completed state [pkg.refresh_db] at time 23:37:15.052310 duration_in_ms=3343.836
2019-01-18 23:37:15,052 [salt.state       :1780][INFO    ][3114] Running state [linux_extra_packages_removed] at time 23:37:15.052926
2019-01-18 23:37:15,053 [salt.state       :1813][INFO    ][3114] Executing state pkg.removed for [linux_extra_packages_removed]
2019-01-18 23:37:15,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2019-01-18 23:37:16,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:37:16,747 [salt.state       :300 ][INFO    ][3114] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2019-01-18 23:37:16,771 [salt.state       :915 ][INFO    ][3114] Loading fresh modules for state activity
2019-01-18 23:37:16,810 [salt.state       :1951][INFO    ][3114] Completed state [linux_extra_packages_removed] at time 23:37:16.810546 duration_in_ms=1757.619
2019-01-18 23:37:16,816 [salt.state       :1780][INFO    ][3114] Running state [linux_extra_packages_latest] at time 23:37:16.815989
2019-01-18 23:37:16,816 [salt.state       :1813][INFO    ][3114] Executing state pkg.latest for [linux_extra_packages_latest]
2019-01-18 23:37:17,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2019-01-18 23:37:17,667 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-18 23:37:17,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2019-01-18 23:37:19,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:37:20,005 [salt.state       :300 ][INFO    ][3114] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2019-01-18 23:37:20,026 [salt.state       :915 ][INFO    ][3114] Loading fresh modules for state activity
2019-01-18 23:37:20,062 [salt.state       :1951][INFO    ][3114] Completed state [linux_extra_packages_latest] at time 23:37:20.062771 duration_in_ms=3246.781
2019-01-18 23:37:20,066 [salt.state       :1780][INFO    ][3114] Running state [UTC] at time 23:37:20.066526
2019-01-18 23:37:20,066 [salt.state       :1813][INFO    ][3114] Executing state timezone.system for [UTC]
2019-01-18 23:37:20,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['timedatectl'] in directory '/root'
2019-01-18 23:37:20,106 [salt.state       :300 ][INFO    ][3114] Timezone UTC already set, UTC already set to UTC
2019-01-18 23:37:20,107 [salt.state       :1951][INFO    ][3114] Completed state [UTC] at time 23:37:20.107407 duration_in_ms=40.88
2019-01-18 23:37:20,111 [salt.state       :1780][INFO    ][3114] Running state [/etc/default/grub.d] at time 23:37:20.111098
2019-01-18 23:37:20,111 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/default/grub.d]
2019-01-18 23:37:20,117 [salt.state       :300 ][INFO    ][3114] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2019-01-18 23:37:20,117 [salt.state       :1951][INFO    ][3114] Completed state [/etc/default/grub.d] at time 23:37:20.117261 duration_in_ms=6.163
2019-01-18 23:37:20,118 [salt.state       :1780][INFO    ][3114] Running state [update-grub] at time 23:37:20.117990
2019-01-18 23:37:20,118 [salt.state       :1813][INFO    ][3114] Executing state cmd.wait for [update-grub]
2019-01-18 23:37:20,118 [salt.state       :300 ][INFO    ][3114] No changes made for update-grub
2019-01-18 23:37:20,118 [salt.state       :1951][INFO    ][3114] Completed state [update-grub] at time 23:37:20.118659 duration_in_ms=0.669
2019-01-18 23:37:20,120 [salt.state       :1780][INFO    ][3114] Running state [/boot/grub/grub.cfg] at time 23:37:20.120527
2019-01-18 23:37:20,120 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/boot/grub/grub.cfg]
2019-01-18 23:37:20,968 [salt.minion      :1308][INFO    ][3025] User sudo_ubuntu Executing command saltutil.find_job with jid 20190118233720952753
2019-01-18 23:37:20,994 [salt.minion      :1432][INFO    ][4113] Starting a new job with PID 4113
2019-01-18 23:37:21,014 [salt.minion      :1711][INFO    ][4113] Returning information for job: 20190118233720952753
2019-01-18 23:37:21,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2019-01-18 23:37:21,056 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:21,057 [salt.state       :300 ][INFO    ][3114] {'mode': '0400'}
2019-01-18 23:37:21,057 [salt.state       :1951][INFO    ][3114] Completed state [/boot/grub/grub.cfg] at time 23:37:21.057458 duration_in_ms=936.929
2019-01-18 23:37:21,058 [salt.state       :1780][INFO    ][3114] Running state [nf_conntrack] at time 23:37:21.058099
2019-01-18 23:37:21,058 [salt.state       :1813][INFO    ][3114] Executing state kmod.present for [nf_conntrack]
2019-01-18 23:37:21,059 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'lsmod' in directory '/root'
2019-01-18 23:37:21,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'lsmod' in directory '/root'
2019-01-18 23:37:21,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'modprobe nf_conntrack' in directory '/root'
2019-01-18 23:37:21,496 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'lsmod' in directory '/root'
2019-01-18 23:37:21,608 [salt.state       :300 ][INFO    ][3114] {'nf_conntrack': 'loaded'}
2019-01-18 23:37:21,608 [salt.state       :1951][INFO    ][3114] Completed state [nf_conntrack] at time 23:37:21.608824 duration_in_ms=550.725
2019-01-18 23:37:21,609 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d] at time 23:37:21.609140
2019-01-18 23:37:21,609 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/modprobe.d]
2019-01-18 23:37:21,611 [salt.state       :300 ][INFO    ][3114] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2019-01-18 23:37:21,611 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d] at time 23:37:21.611819 duration_in_ms=2.679
2019-01-18 23:37:21,614 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/hfsplus.conf] at time 23:37:21.614575
2019-01-18 23:37:21,614 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2019-01-18 23:37:21,636 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2019-01-18 23:37:21,780 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:21,781 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/hfsplus.conf] at time 23:37:21.781005 duration_in_ms=166.429
2019-01-18 23:37:21,783 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/rds.conf] at time 23:37:21.783300
2019-01-18 23:37:21,783 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2019-01-18 23:37:21,931 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:21,931 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/rds.conf] at time 23:37:21.931804 duration_in_ms=148.503
2019-01-18 23:37:21,933 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/cramfs.conf] at time 23:37:21.933144
2019-01-18 23:37:21,933 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2019-01-18 23:37:22,083 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:22,084 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/cramfs.conf] at time 23:37:22.084002 duration_in_ms=150.857
2019-01-18 23:37:22,085 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/freevxfs.conf] at time 23:37:22.085469
2019-01-18 23:37:22,086 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2019-01-18 23:37:22,242 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:22,242 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/freevxfs.conf] at time 23:37:22.242294 duration_in_ms=156.824
2019-01-18 23:37:22,243 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/hfs.conf] at time 23:37:22.243794
2019-01-18 23:37:22,244 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2019-01-18 23:37:22,395 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:22,395 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/hfs.conf] at time 23:37:22.395868 duration_in_ms=152.074
2019-01-18 23:37:22,397 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/squashfs.conf] at time 23:37:22.397265
2019-01-18 23:37:22,397 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2019-01-18 23:37:22,538 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:22,538 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/squashfs.conf] at time 23:37:22.538398 duration_in_ms=141.133
2019-01-18 23:37:22,539 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/udf.conf] at time 23:37:22.539718
2019-01-18 23:37:22,539 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2019-01-18 23:37:22,676 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:22,676 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/udf.conf] at time 23:37:22.676785 duration_in_ms=137.066
2019-01-18 23:37:22,678 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/vfat.conf] at time 23:37:22.678745
2019-01-18 23:37:22,679 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2019-01-18 23:37:22,815 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:22,815 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/vfat.conf] at time 23:37:22.815588 duration_in_ms=136.842
2019-01-18 23:37:22,816 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/sctp.conf] at time 23:37:22.816904
2019-01-18 23:37:22,817 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2019-01-18 23:37:23,251 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:23,251 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/sctp.conf] at time 23:37:23.251277 duration_in_ms=434.371
2019-01-18 23:37:23,252 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/jffs2.conf] at time 23:37:23.252774
2019-01-18 23:37:23,253 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2019-01-18 23:37:23,393 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:23,394 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/jffs2.conf] at time 23:37:23.394072 duration_in_ms=141.297
2019-01-18 23:37:23,395 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/tipc.conf] at time 23:37:23.395418
2019-01-18 23:37:23,395 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2019-01-18 23:37:23,529 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:23,530 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/tipc.conf] at time 23:37:23.530114 duration_in_ms=134.695
2019-01-18 23:37:23,531 [salt.state       :1780][INFO    ][3114] Running state [/etc/modprobe.d/dccp.conf] at time 23:37:23.531572
2019-01-18 23:37:23,531 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2019-01-18 23:37:23,679 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:23,679 [salt.state       :1951][INFO    ][3114] Completed state [/etc/modprobe.d/dccp.conf] at time 23:37:23.679799 duration_in_ms=148.226
2019-01-18 23:37:23,680 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_congestion_control] at time 23:37:23.680057
2019-01-18 23:37:23,680 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2019-01-18 23:37:23,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2019-01-18 23:37:23,709 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_congestion_control': 'yeah'}
2019-01-18 23:37:23,710 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_congestion_control] at time 23:37:23.709535 duration_in_ms=29.477
2019-01-18 23:37:23,711 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_slow_start_after_idle] at time 23:37:23.711127
2019-01-18 23:37:23,711 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2019-01-18 23:37:23,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2019-01-18 23:37:23,725 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_slow_start_after_idle': 0}
2019-01-18 23:37:23,726 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 23:37:23.726355 duration_in_ms=15.227
2019-01-18 23:37:23,726 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 23:37:23.726744
2019-01-18 23:37:23,727 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2019-01-18 23:37:23,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2019-01-18 23:37:23,741 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2019-01-18 23:37:23,742 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 23:37:23.742352 duration_in_ms=15.608
2019-01-18 23:37:23,742 [salt.state       :1780][INFO    ][3114] Running state [net.nf_conntrack_max] at time 23:37:23.742723
2019-01-18 23:37:23,743 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.nf_conntrack_max]
2019-01-18 23:37:23,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2019-01-18 23:37:23,758 [salt.state       :300 ][INFO    ][3114] {'net.nf_conntrack_max': 1048576}
2019-01-18 23:37:23,759 [salt.state       :1951][INFO    ][3114] Completed state [net.nf_conntrack_max] at time 23:37:23.759285 duration_in_ms=16.562
2019-01-18 23:37:23,759 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 23:37:23.759674
2019-01-18 23:37:23,760 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2019-01-18 23:37:23,761 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2019-01-18 23:37:23,773 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2019-01-18 23:37:23,774 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 23:37:23.774357 duration_in_ms=14.683
2019-01-18 23:37:23,774 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.default.log_martians] at time 23:37:23.774740
2019-01-18 23:37:23,775 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2019-01-18 23:37:23,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2019-01-18 23:37:23,788 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.default.log_martians': 1}
2019-01-18 23:37:23,789 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.default.log_martians] at time 23:37:23.788974 duration_in_ms=14.234
2019-01-18 23:37:23,789 [salt.state       :1780][INFO    ][3114] Running state [net.core.somaxconn] at time 23:37:23.789349
2019-01-18 23:37:23,789 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.core.somaxconn]
2019-01-18 23:37:23,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2019-01-18 23:37:23,802 [salt.state       :300 ][INFO    ][3114] {'net.core.somaxconn': 4096}
2019-01-18 23:37:23,803 [salt.state       :1951][INFO    ][3114] Completed state [net.core.somaxconn] at time 23:37:23.803148 duration_in_ms=13.799
2019-01-18 23:37:23,803 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.all.send_redirects] at time 23:37:23.803503
2019-01-18 23:37:23,803 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2019-01-18 23:37:23,804 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2019-01-18 23:37:23,818 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.all.send_redirects': 0}
2019-01-18 23:37:23,818 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.all.send_redirects] at time 23:37:23.818899 duration_in_ms=15.396
2019-01-18 23:37:23,819 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_tw_reuse] at time 23:37:23.819263
2019-01-18 23:37:23,819 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2019-01-18 23:37:23,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2019-01-18 23:37:23,833 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_tw_reuse': 1}
2019-01-18 23:37:23,833 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_tw_reuse] at time 23:37:23.833467 duration_in_ms=14.204
2019-01-18 23:37:23,834 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.default.rp_filter] at time 23:37:23.834497
2019-01-18 23:37:23,834 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2019-01-18 23:37:23,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2019-01-18 23:37:23,849 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.default.rp_filter': 1}
2019-01-18 23:37:23,850 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.default.rp_filter] at time 23:37:23.850424 duration_in_ms=15.926
2019-01-18 23:37:23,850 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_fin_timeout] at time 23:37:23.850817
2019-01-18 23:37:23,851 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2019-01-18 23:37:23,852 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2019-01-18 23:37:23,866 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_fin_timeout': 30}
2019-01-18 23:37:23,867 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_fin_timeout] at time 23:37:23.867320 duration_in_ms=16.502
2019-01-18 23:37:23,867 [salt.state       :1780][INFO    ][3114] Running state [kernel.panic] at time 23:37:23.867739
2019-01-18 23:37:23,868 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [kernel.panic]
2019-01-18 23:37:23,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2019-01-18 23:37:23,883 [salt.state       :300 ][INFO    ][3114] {'kernel.panic': 60}
2019-01-18 23:37:23,883 [salt.state       :1951][INFO    ][3114] Completed state [kernel.panic] at time 23:37:23.883495 duration_in_ms=15.756
2019-01-18 23:37:23,883 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_keepalive_probes] at time 23:37:23.883862
2019-01-18 23:37:23,884 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2019-01-18 23:37:23,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2019-01-18 23:37:23,898 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_keepalive_probes': 8}
2019-01-18 23:37:23,898 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_keepalive_probes] at time 23:37:23.898557 duration_in_ms=14.695
2019-01-18 23:37:23,898 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.all.log_martians] at time 23:37:23.898917
2019-01-18 23:37:23,899 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2019-01-18 23:37:23,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2019-01-18 23:37:23,912 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.all.log_martians': 1}
2019-01-18 23:37:23,913 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.all.log_martians] at time 23:37:23.913059 duration_in_ms=14.142
2019-01-18 23:37:23,913 [salt.state       :1780][INFO    ][3114] Running state [fs.suid_dumpable] at time 23:37:23.913417
2019-01-18 23:37:23,914 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [fs.suid_dumpable]
2019-01-18 23:37:23,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2019-01-18 23:37:23,928 [salt.state       :300 ][INFO    ][3114] {'fs.suid_dumpable': 0}
2019-01-18 23:37:23,929 [salt.state       :1951][INFO    ][3114] Completed state [fs.suid_dumpable] at time 23:37:23.929168 duration_in_ms=15.751
2019-01-18 23:37:23,930 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.default.accept_redirects] at time 23:37:23.930132
2019-01-18 23:37:23,930 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2019-01-18 23:37:23,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2019-01-18 23:37:23,945 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.default.accept_redirects': 0}
2019-01-18 23:37:23,945 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.default.accept_redirects] at time 23:37:23.945439 duration_in_ms=15.307
2019-01-18 23:37:23,945 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.default.secure_redirects] at time 23:37:23.945823
2019-01-18 23:37:23,946 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2019-01-18 23:37:23,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2019-01-18 23:37:23,959 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.default.secure_redirects': 0}
2019-01-18 23:37:23,959 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.default.secure_redirects] at time 23:37:23.959735 duration_in_ms=13.911
2019-01-18 23:37:23,960 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.default.accept_source_route] at time 23:37:23.960108
2019-01-18 23:37:23,960 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2019-01-18 23:37:23,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2019-01-18 23:37:23,975 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.default.accept_source_route': 0}
2019-01-18 23:37:23,976 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.default.accept_source_route] at time 23:37:23.975949 duration_in_ms=15.84
2019-01-18 23:37:23,976 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_keepalive_intvl] at time 23:37:23.976324
2019-01-18 23:37:23,976 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2019-01-18 23:37:23,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2019-01-18 23:37:23,991 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_keepalive_intvl': 3}
2019-01-18 23:37:23,991 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_keepalive_intvl] at time 23:37:23.991523 duration_in_ms=15.198
2019-01-18 23:37:23,991 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_keepalive_time] at time 23:37:23.991895
2019-01-18 23:37:23,992 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2019-01-18 23:37:23,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2019-01-18 23:37:24,005 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_keepalive_time': 30}
2019-01-18 23:37:24,006 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_keepalive_time] at time 23:37:24.006125 duration_in_ms=14.229
2019-01-18 23:37:24,006 [salt.state       :1780][INFO    ][3114] Running state [kernel.randomize_va_space] at time 23:37:24.006549
2019-01-18 23:37:24,006 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [kernel.randomize_va_space]
2019-01-18 23:37:24,007 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2019-01-18 23:37:24,021 [salt.state       :300 ][INFO    ][3114] {'kernel.randomize_va_space': 2}
2019-01-18 23:37:24,022 [salt.state       :1951][INFO    ][3114] Completed state [kernel.randomize_va_space] at time 23:37:24.022506 duration_in_ms=15.955
2019-01-18 23:37:24,023 [salt.state       :1780][INFO    ][3114] Running state [fs.file-max] at time 23:37:24.022960
2019-01-18 23:37:24,023 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [fs.file-max]
2019-01-18 23:37:24,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2019-01-18 23:37:24,039 [salt.state       :300 ][INFO    ][3114] {'fs.file-max': 124165}
2019-01-18 23:37:24,040 [salt.state       :1951][INFO    ][3114] Completed state [fs.file-max] at time 23:37:24.039998 duration_in_ms=17.037
2019-01-18 23:37:24,042 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_syncookies] at time 23:37:24.042586
2019-01-18 23:37:24,043 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2019-01-18 23:37:24,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2019-01-18 23:37:24,061 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_syncookies': 1}
2019-01-18 23:37:24,062 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_syncookies] at time 23:37:24.061972 duration_in_ms=19.386
2019-01-18 23:37:24,062 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_max_syn_backlog] at time 23:37:24.062357
2019-01-18 23:37:24,062 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2019-01-18 23:37:24,063 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2019-01-18 23:37:24,078 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_max_syn_backlog': 8192}
2019-01-18 23:37:24,079 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_max_syn_backlog] at time 23:37:24.079405 duration_in_ms=17.048
2019-01-18 23:37:24,079 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.all.rp_filter] at time 23:37:24.079864
2019-01-18 23:37:24,080 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2019-01-18 23:37:24,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2019-01-18 23:37:24,099 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.all.rp_filter': 1}
2019-01-18 23:37:24,100 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.all.rp_filter] at time 23:37:24.100196 duration_in_ms=20.331
2019-01-18 23:37:24,100 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.all.accept_source_route] at time 23:37:24.100617
2019-01-18 23:37:24,100 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2019-01-18 23:37:24,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2019-01-18 23:37:24,116 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.all.accept_source_route': 0}
2019-01-18 23:37:24,117 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.all.accept_source_route] at time 23:37:24.116921 duration_in_ms=16.303
2019-01-18 23:37:24,117 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.tcp_retries2] at time 23:37:24.117312
2019-01-18 23:37:24,119 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2019-01-18 23:37:24,120 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2019-01-18 23:37:24,133 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.tcp_retries2': 5}
2019-01-18 23:37:24,133 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.tcp_retries2] at time 23:37:24.133729 duration_in_ms=16.417
2019-01-18 23:37:24,134 [salt.state       :1780][INFO    ][3114] Running state [net.core.netdev_max_backlog] at time 23:37:24.134112
2019-01-18 23:37:24,134 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.core.netdev_max_backlog]
2019-01-18 23:37:24,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2019-01-18 23:37:24,147 [salt.state       :300 ][INFO    ][3114] {'net.core.netdev_max_backlog': 261144}
2019-01-18 23:37:24,147 [salt.state       :1951][INFO    ][3114] Completed state [net.core.netdev_max_backlog] at time 23:37:24.147825 duration_in_ms=13.712
2019-01-18 23:37:24,148 [salt.state       :1780][INFO    ][3114] Running state [vm.swappiness] at time 23:37:24.148189
2019-01-18 23:37:24,148 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [vm.swappiness]
2019-01-18 23:37:24,149 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2019-01-18 23:37:24,163 [salt.state       :300 ][INFO    ][3114] {'vm.swappiness': 10}
2019-01-18 23:37:24,163 [salt.state       :1951][INFO    ][3114] Completed state [vm.swappiness] at time 23:37:24.163864 duration_in_ms=15.674
2019-01-18 23:37:24,164 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.all.secure_redirects] at time 23:37:24.164266
2019-01-18 23:37:24,164 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2019-01-18 23:37:24,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2019-01-18 23:37:24,178 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.all.secure_redirects': 0}
2019-01-18 23:37:24,178 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.all.secure_redirects] at time 23:37:24.178780 duration_in_ms=14.514
2019-01-18 23:37:24,179 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.neigh.default.gc_thresh1] at time 23:37:24.179182
2019-01-18 23:37:24,179 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2019-01-18 23:37:24,180 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2019-01-18 23:37:24,195 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2019-01-18 23:37:24,196 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 23:37:24.196108 duration_in_ms=16.926
2019-01-18 23:37:24,196 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.neigh.default.gc_thresh2] at time 23:37:24.196494
2019-01-18 23:37:24,196 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2019-01-18 23:37:24,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2019-01-18 23:37:24,212 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2019-01-18 23:37:24,212 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 23:37:24.212655 duration_in_ms=16.161
2019-01-18 23:37:24,213 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.neigh.default.gc_thresh3] at time 23:37:24.213026
2019-01-18 23:37:24,213 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2019-01-18 23:37:24,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2019-01-18 23:37:24,233 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2019-01-18 23:37:24,234 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 23:37:24.234146 duration_in_ms=21.12
2019-01-18 23:37:24,234 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.default.send_redirects] at time 23:37:24.234694
2019-01-18 23:37:24,235 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2019-01-18 23:37:24,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2019-01-18 23:37:24,253 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.default.send_redirects': 0}
2019-01-18 23:37:24,253 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.default.send_redirects] at time 23:37:24.253496 duration_in_ms=18.801
2019-01-18 23:37:24,254 [salt.state       :1780][INFO    ][3114] Running state [net.ipv4.conf.all.accept_redirects] at time 23:37:24.254257
2019-01-18 23:37:24,254 [salt.state       :1813][INFO    ][3114] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2019-01-18 23:37:24,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2019-01-18 23:37:24,269 [salt.state       :300 ][INFO    ][3114] {'net.ipv4.conf.all.accept_redirects': 0}
2019-01-18 23:37:24,270 [salt.state       :1951][INFO    ][3114] Completed state [net.ipv4.conf.all.accept_redirects] at time 23:37:24.270401 duration_in_ms=16.143
2019-01-18 23:37:24,270 [salt.state       :1780][INFO    ][3114] Running state [linux_sysfs_package] at time 23:37:24.270928
2019-01-18 23:37:24,271 [salt.state       :1813][INFO    ][3114] Executing state pkg.installed for [linux_sysfs_package]
2019-01-18 23:37:24,299 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2019-01-18 23:37:24,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-18 23:37:26,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-18 23:37:26,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2019-01-18 23:37:29,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:37:29,175 [salt.state       :300 ][INFO    ][3114] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2019-01-18 23:37:29,195 [salt.state       :915 ][INFO    ][3114] Loading fresh modules for state activity
2019-01-18 23:37:29,230 [salt.state       :1951][INFO    ][3114] Completed state [linux_sysfs_package] at time 23:37:29.230011 duration_in_ms=4959.082
2019-01-18 23:37:29,235 [salt.state       :1780][INFO    ][3114] Running state [/etc/sysfs.d] at time 23:37:29.235818
2019-01-18 23:37:29,236 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/etc/sysfs.d]
2019-01-18 23:37:29,240 [salt.state       :300 ][INFO    ][3114] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2019-01-18 23:37:29,241 [salt.state       :1951][INFO    ][3114] Completed state [/etc/sysfs.d] at time 23:37:29.241053 duration_in_ms=5.235
2019-01-18 23:37:29,243 [salt.state       :1780][INFO    ][3114] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 23:37:29.243151
2019-01-18 23:37:29,243 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2019-01-18 23:37:29,263 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/sysfs.conf'
2019-01-18 23:37:29,280 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:29,281 [salt.state       :1951][INFO    ][3114] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 23:37:29.281041 duration_in_ms=37.89
2019-01-18 23:37:29,282 [salt.state       :1780][INFO    ][3114] Running state [sysfs.write] at time 23:37:29.282493
2019-01-18 23:37:29,282 [salt.state       :1813][INFO    ][3114] Executing state module.run for [sysfs.write]
2019-01-18 23:37:29,283 [salt.utils.decorators:613 ][WARNING ][3114] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-18 23:37:29,285 [salt.state       :300 ][INFO    ][3114] {'ret': True}
2019-01-18 23:37:29,285 [salt.state       :1951][INFO    ][3114] Completed state [sysfs.write] at time 23:37:29.285352 duration_in_ms=2.859
2019-01-18 23:37:29,788 [salt.state       :1780][INFO    ][3114] Running state [ondemand] at time 23:37:29.788866
2019-01-18 23:37:29,789 [salt.state       :1813][INFO    ][3114] Executing state service.dead for [ondemand]
2019-01-18 23:37:29,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2019-01-18 23:37:29,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-01-18 23:37:29,823 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-18 23:37:29,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2019-01-18 23:37:29,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-01-18 23:37:29,924 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-18 23:37:29,948 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-18 23:37:29,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2019-01-18 23:37:30,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-18 23:37:30,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'runlevel' in directory '/root'
2019-01-18 23:37:30,154 [salt.state       :300 ][INFO    ][3114] {'ondemand': True}
2019-01-18 23:37:30,155 [salt.state       :1951][INFO    ][3114] Completed state [ondemand] at time 23:37:30.155390 duration_in_ms=366.524
2019-01-18 23:37:30,156 [salt.state       :1780][INFO    ][3114] Running state [en_US.UTF-8] at time 23:37:30.156771
2019-01-18 23:37:30,157 [salt.state       :1813][INFO    ][3114] Executing state locale.present for [en_US.UTF-8]
2019-01-18 23:37:30,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'locale -a' in directory '/root'
2019-01-18 23:37:30,170 [salt.state       :300 ][INFO    ][3114] Locale en_US.UTF-8 is already present
2019-01-18 23:37:30,171 [salt.state       :1951][INFO    ][3114] Completed state [en_US.UTF-8] at time 23:37:30.171378 duration_in_ms=14.607
2019-01-18 23:37:30,174 [salt.state       :1780][INFO    ][3114] Running state [en_US.UTF-8] at time 23:37:30.174455
2019-01-18 23:37:30,175 [salt.state       :1813][INFO    ][3114] Executing state locale.system for [en_US.UTF-8]
2019-01-18 23:37:30,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'localectl' in directory '/root'
2019-01-18 23:37:30,219 [salt.state       :300 ][INFO    ][3114] System locale en_US.UTF-8 already set
2019-01-18 23:37:30,219 [salt.state       :1951][INFO    ][3114] Completed state [en_US.UTF-8] at time 23:37:30.219852 duration_in_ms=45.395
2019-01-18 23:37:30,221 [salt.state       :1780][INFO    ][3114] Running state [root] at time 23:37:30.221725
2019-01-18 23:37:30,223 [salt.state       :1813][INFO    ][3114] Executing state group.present for [root]
2019-01-18 23:37:30,224 [salt.state       :300 ][INFO    ][3114] Group root is present and up to date
2019-01-18 23:37:30,224 [salt.state       :1951][INFO    ][3114] Completed state [root] at time 23:37:30.224900 duration_in_ms=3.175
2019-01-18 23:37:30,228 [salt.state       :1780][INFO    ][3114] Running state [root] at time 23:37:30.228825
2019-01-18 23:37:30,230 [salt.state       :1813][INFO    ][3114] Executing state user.present for [root]
2019-01-18 23:37:30,235 [salt.state       :300 ][INFO    ][3114] User root is present and up to date
2019-01-18 23:37:30,236 [salt.state       :1951][INFO    ][3114] Completed state [root] at time 23:37:30.235987 duration_in_ms=7.162
2019-01-18 23:37:30,238 [salt.state       :1780][INFO    ][3114] Running state [/root] at time 23:37:30.238688
2019-01-18 23:37:30,239 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/root]
2019-01-18 23:37:30,240 [salt.state       :300 ][INFO    ][3114] Directory /root is in the correct state
Directory /root updated
2019-01-18 23:37:30,240 [salt.state       :1951][INFO    ][3114] Completed state [/root] at time 23:37:30.240821 duration_in_ms=2.133
2019-01-18 23:37:30,241 [salt.state       :1780][INFO    ][3114] Running state [/etc/sudoers.d/90-salt-user-root] at time 23:37:30.241270
2019-01-18 23:37:30,242 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2019-01-18 23:37:30,242 [salt.state       :300 ][INFO    ][3114] File /etc/sudoers.d/90-salt-user-root is not present
2019-01-18 23:37:30,242 [salt.state       :1951][INFO    ][3114] Completed state [/etc/sudoers.d/90-salt-user-root] at time 23:37:30.242868 duration_in_ms=1.599
2019-01-18 23:37:30,243 [salt.state       :1780][INFO    ][3114] Running state [ubuntu] at time 23:37:30.243106
2019-01-18 23:37:30,243 [salt.state       :1813][INFO    ][3114] Executing state group.present for [ubuntu]
2019-01-18 23:37:30,243 [salt.state       :300 ][INFO    ][3114] Group ubuntu is present and up to date
2019-01-18 23:37:30,243 [salt.state       :1951][INFO    ][3114] Completed state [ubuntu] at time 23:37:30.243851 duration_in_ms=0.745
2019-01-18 23:37:30,245 [salt.state       :1780][INFO    ][3114] Running state [ubuntu] at time 23:37:30.245092
2019-01-18 23:37:30,245 [salt.state       :1813][INFO    ][3114] Executing state user.present for [ubuntu]
2019-01-18 23:37:30,248 [salt.state       :300 ][INFO    ][3114] {'passwd': 'XXX-REDACTED-XXX'}
2019-01-18 23:37:30,249 [salt.state       :1951][INFO    ][3114] Completed state [ubuntu] at time 23:37:30.249011 duration_in_ms=3.919
2019-01-18 23:37:30,251 [salt.state       :1780][INFO    ][3114] Running state [/home/ubuntu] at time 23:37:30.251681
2019-01-18 23:37:30,251 [salt.state       :1813][INFO    ][3114] Executing state file.directory for [/home/ubuntu]
2019-01-18 23:37:30,253 [salt.state       :300 ][INFO    ][3114] {'mode': '0700'}
2019-01-18 23:37:30,253 [salt.state       :1951][INFO    ][3114] Completed state [/home/ubuntu] at time 23:37:30.253195 duration_in_ms=1.514
2019-01-18 23:37:30,255 [salt.state       :1780][INFO    ][3114] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 23:37:30.255115
2019-01-18 23:37:30,255 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2019-01-18 23:37:30,275 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2019-01-18 23:37:30,287 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.JIopTi' in directory '/root'
2019-01-18 23:37:30,309 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:30,309 [salt.state       :1951][INFO    ][3114] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 23:37:30.309863 duration_in_ms=54.747
2019-01-18 23:37:30,310 [salt.state       :1780][INFO    ][3114] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 23:37:30.310267
2019-01-18 23:37:30,310 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2019-01-18 23:37:30,328 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2019-01-18 23:37:30,433 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:30,433 [salt.state       :1951][INFO    ][3114] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 23:37:30.433516 duration_in_ms=123.247
2019-01-18 23:37:30,433 [salt.state       :1780][INFO    ][3114] Running state [/etc/security/limits.d/90-salt-default.conf] at time 23:37:30.433751
2019-01-18 23:37:30,433 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2019-01-18 23:37:30,556 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:30,556 [salt.state       :1951][INFO    ][3114] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 23:37:30.556572 duration_in_ms=122.82
2019-01-18 23:37:30,556 [salt.state       :1780][INFO    ][3114] Running state [autofs] at time 23:37:30.556826
2019-01-18 23:37:30,557 [salt.state       :1813][INFO    ][3114] Executing state service.disabled for [autofs]
2019-01-18 23:37:30,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2019-01-18 23:37:30,576 [salt.state       :300 ][INFO    ][3114] The named service autofs is not available
2019-01-18 23:37:30,577 [salt.state       :1951][INFO    ][3114] Completed state [autofs] at time 23:37:30.576956 duration_in_ms=20.129
2019-01-18 23:37:30,577 [salt.state       :1780][INFO    ][3114] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 23:37:30.577937
2019-01-18 23:37:30,578 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2019-01-18 23:37:30,600 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2019-01-18 23:37:30,728 [salt.state       :300 ][INFO    ][3114] File changed:
New file
2019-01-18 23:37:30,728 [salt.state       :1951][INFO    ][3114] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 23:37:30.728894 duration_in_ms=150.956
2019-01-18 23:37:30,732 [salt.state       :1780][INFO    ][3114] Running state [service.systemctl_reload] at time 23:37:30.732371
2019-01-18 23:37:30,732 [salt.state       :1813][INFO    ][3114] Executing state module.wait for [service.systemctl_reload]
2019-01-18 23:37:30,733 [salt.state       :300 ][INFO    ][3114] No changes made for service.systemctl_reload
2019-01-18 23:37:30,734 [salt.state       :1951][INFO    ][3114] Completed state [service.systemctl_reload] at time 23:37:30.734063 duration_in_ms=1.692
2019-01-18 23:37:30,734 [salt.state       :1780][INFO    ][3114] Running state [service.systemctl_reload] at time 23:37:30.734468
2019-01-18 23:37:30,734 [salt.state       :1813][INFO    ][3114] Executing state module.mod_watch for [service.systemctl_reload]
2019-01-18 23:37:30,735 [salt.utils.decorators:613 ][WARNING ][3114] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-18 23:37:30,736 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2019-01-18 23:37:30,850 [salt.state       :300 ][INFO    ][3114] {'ret': True}
2019-01-18 23:37:30,854 [salt.state       :1951][INFO    ][3114] Completed state [service.systemctl_reload] at time 23:37:30.854549 duration_in_ms=120.08
2019-01-18 23:37:30,855 [salt.state       :1780][INFO    ][3114] Running state [/etc/shadow] at time 23:37:30.855043
2019-01-18 23:37:30,855 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/shadow]
2019-01-18 23:37:30,855 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,857 [salt.state       :300 ][INFO    ][3114] File /etc/shadow exists with proper permissions. No changes made.
2019-01-18 23:37:30,857 [salt.state       :1951][INFO    ][3114] Completed state [/etc/shadow] at time 23:37:30.857315 duration_in_ms=2.271
2019-01-18 23:37:30,857 [salt.state       :1780][INFO    ][3114] Running state [/etc/gshadow] at time 23:37:30.857603
2019-01-18 23:37:30,857 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/gshadow]
2019-01-18 23:37:30,858 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,858 [salt.state       :300 ][INFO    ][3114] File /etc/gshadow exists with proper permissions. No changes made.
2019-01-18 23:37:30,859 [salt.state       :1951][INFO    ][3114] Completed state [/etc/gshadow] at time 23:37:30.858998 duration_in_ms=1.394
2019-01-18 23:37:30,859 [salt.state       :1780][INFO    ][3114] Running state [/etc/group-] at time 23:37:30.859196
2019-01-18 23:37:30,859 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/group-]
2019-01-18 23:37:30,859 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,860 [salt.state       :300 ][INFO    ][3114] File /etc/group- exists with proper permissions. No changes made.
2019-01-18 23:37:30,860 [salt.state       :1951][INFO    ][3114] Completed state [/etc/group-] at time 23:37:30.860556 duration_in_ms=1.36
2019-01-18 23:37:30,860 [salt.state       :1780][INFO    ][3114] Running state [/etc/shadow-] at time 23:37:30.860804
2019-01-18 23:37:30,861 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/shadow-]
2019-01-18 23:37:30,861 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,862 [salt.state       :300 ][INFO    ][3114] File /etc/shadow- exists with proper permissions. No changes made.
2019-01-18 23:37:30,862 [salt.state       :1951][INFO    ][3114] Completed state [/etc/shadow-] at time 23:37:30.862487 duration_in_ms=1.684
2019-01-18 23:37:30,862 [salt.state       :1780][INFO    ][3114] Running state [/etc/passwd-] at time 23:37:30.862693
2019-01-18 23:37:30,862 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/passwd-]
2019-01-18 23:37:30,863 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,863 [salt.state       :300 ][INFO    ][3114] File /etc/passwd- exists with proper permissions. No changes made.
2019-01-18 23:37:30,863 [salt.state       :1951][INFO    ][3114] Completed state [/etc/passwd-] at time 23:37:30.863943 duration_in_ms=1.251
2019-01-18 23:37:30,864 [salt.state       :1780][INFO    ][3114] Running state [/etc/passwd] at time 23:37:30.864153
2019-01-18 23:37:30,864 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/passwd]
2019-01-18 23:37:30,864 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,865 [salt.state       :300 ][INFO    ][3114] File /etc/passwd exists with proper permissions. No changes made.
2019-01-18 23:37:30,865 [salt.state       :1951][INFO    ][3114] Completed state [/etc/passwd] at time 23:37:30.865955 duration_in_ms=1.802
2019-01-18 23:37:30,866 [salt.state       :1780][INFO    ][3114] Running state [/etc/gshadow-] at time 23:37:30.866161
2019-01-18 23:37:30,866 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/gshadow-]
2019-01-18 23:37:30,866 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,867 [salt.state       :300 ][INFO    ][3114] File /etc/gshadow- exists with proper permissions. No changes made.
2019-01-18 23:37:30,867 [salt.state       :1951][INFO    ][3114] Completed state [/etc/gshadow-] at time 23:37:30.867535 duration_in_ms=1.374
2019-01-18 23:37:30,867 [salt.state       :1780][INFO    ][3114] Running state [/etc/group] at time 23:37:30.867726
2019-01-18 23:37:30,867 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/group]
2019-01-18 23:37:30,868 [salt.loaded.int.states.file:2298][WARNING ][3114] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-18 23:37:30,868 [salt.state       :300 ][INFO    ][3114] File /etc/group exists with proper permissions. No changes made.
2019-01-18 23:37:30,869 [salt.state       :1951][INFO    ][3114] Completed state [/etc/group] at time 23:37:30.869016 duration_in_ms=1.29
2019-01-18 23:37:30,869 [salt.state       :1780][INFO    ][3114] Running state [/etc/issue] at time 23:37:30.869257
2019-01-18 23:37:30,869 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/issue]
2019-01-18 23:37:30,872 [salt.state       :300 ][INFO    ][3114] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2019-01-18 23:37:30,872 [salt.state       :1951][INFO    ][3114] Completed state [/etc/issue] at time 23:37:30.872212 duration_in_ms=2.955
2019-01-18 23:37:30,872 [salt.state       :1780][INFO    ][3114] Running state [/etc/hostname] at time 23:37:30.872419
2019-01-18 23:37:30,872 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/hostname]
2019-01-18 23:37:30,893 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2019-01-18 23:37:30,904 [salt.state       :300 ][INFO    ][3114] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb02

2019-01-18 23:37:30,904 [salt.state       :1951][INFO    ][3114] Completed state [/etc/hostname] at time 23:37:30.904206 duration_in_ms=31.787
2019-01-18 23:37:30,908 [salt.state       :1780][INFO    ][3114] Running state [hostname mdb02] at time 23:37:30.908036
2019-01-18 23:37:30,908 [salt.state       :1813][INFO    ][3114] Executing state cmd.run for [hostname mdb02]
2019-01-18 23:37:30,908 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'test "$(hostname)" = "mdb02"' in directory '/root'
2019-01-18 23:37:30,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'hostname mdb02' in directory '/root'
2019-01-18 23:37:30,939 [salt.state       :300 ][INFO    ][3114] {'pid': 5100, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-01-18 23:37:30,939 [salt.state       :1951][INFO    ][3114] Completed state [hostname mdb02] at time 23:37:30.939567 duration_in_ms=31.531
2019-01-18 23:37:30,940 [salt.state       :1780][INFO    ][3114] Running state [mdb02] at time 23:37:30.940953
2019-01-18 23:37:30,941 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb02]
2019-01-18 23:37:30,942 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb02'}
2019-01-18 23:37:30,942 [salt.state       :1951][INFO    ][3114] Completed state [mdb02] at time 23:37:30.942952 duration_in_ms=1.998
2019-01-18 23:37:30,943 [salt.state       :1780][INFO    ][3114] Running state [mdb02.mcp-odl-ha.local] at time 23:37:30.943288
2019-01-18 23:37:30,943 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb02.mcp-odl-ha.local]
2019-01-18 23:37:30,944 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb02.mcp-odl-ha.local'}
2019-01-18 23:37:30,944 [salt.state       :1951][INFO    ][3114] Completed state [mdb02.mcp-odl-ha.local] at time 23:37:30.944554 duration_in_ms=1.265
2019-01-18 23:37:30,944 [salt.state       :1780][INFO    ][3114] Running state [mdb03] at time 23:37:30.944889
2019-01-18 23:37:30,945 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb03]
2019-01-18 23:37:30,946 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb03'}
2019-01-18 23:37:30,947 [salt.state       :1951][INFO    ][3114] Completed state [mdb03] at time 23:37:30.947042 duration_in_ms=2.153
2019-01-18 23:37:30,947 [salt.state       :1780][INFO    ][3114] Running state [mdb03.mcp-odl-ha.local] at time 23:37:30.947362
2019-01-18 23:37:30,947 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb03.mcp-odl-ha.local]
2019-01-18 23:37:30,948 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb03.mcp-odl-ha.local'}
2019-01-18 23:37:30,948 [salt.state       :1951][INFO    ][3114] Completed state [mdb03.mcp-odl-ha.local] at time 23:37:30.948551 duration_in_ms=1.189
2019-01-18 23:37:30,948 [salt.state       :1780][INFO    ][3114] Running state [mdb01] at time 23:37:30.948867
2019-01-18 23:37:30,949 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb01]
2019-01-18 23:37:30,950 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb01'}
2019-01-18 23:37:30,950 [salt.state       :1951][INFO    ][3114] Completed state [mdb01] at time 23:37:30.950530 duration_in_ms=1.662
2019-01-18 23:37:30,950 [salt.state       :1780][INFO    ][3114] Running state [mdb01.mcp-odl-ha.local] at time 23:37:30.950845
2019-01-18 23:37:30,951 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb01.mcp-odl-ha.local]
2019-01-18 23:37:30,951 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb01.mcp-odl-ha.local'}
2019-01-18 23:37:30,952 [salt.state       :1951][INFO    ][3114] Completed state [mdb01.mcp-odl-ha.local] at time 23:37:30.952111 duration_in_ms=1.266
2019-01-18 23:37:30,952 [salt.state       :1780][INFO    ][3114] Running state [mdb] at time 23:37:30.952492
2019-01-18 23:37:30,952 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb]
2019-01-18 23:37:30,954 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb'}
2019-01-18 23:37:30,955 [salt.state       :1951][INFO    ][3114] Completed state [mdb] at time 23:37:30.955154 duration_in_ms=2.661
2019-01-18 23:37:30,955 [salt.state       :1780][INFO    ][3114] Running state [mdb.mcp-odl-ha.local] at time 23:37:30.955480
2019-01-18 23:37:30,955 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mdb.mcp-odl-ha.local]
2019-01-18 23:37:30,956 [salt.state       :300 ][INFO    ][3114] {'host': 'mdb.mcp-odl-ha.local'}
2019-01-18 23:37:30,956 [salt.state       :1951][INFO    ][3114] Completed state [mdb.mcp-odl-ha.local] at time 23:37:30.956676 duration_in_ms=1.196
2019-01-18 23:37:30,957 [salt.state       :1780][INFO    ][3114] Running state [cfg01] at time 23:37:30.957013
2019-01-18 23:37:30,957 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cfg01]
2019-01-18 23:37:30,959 [salt.state       :300 ][INFO    ][3114] {'host': 'cfg01'}
2019-01-18 23:37:30,959 [salt.state       :1951][INFO    ][3114] Completed state [cfg01] at time 23:37:30.959378 duration_in_ms=2.365
2019-01-18 23:37:30,959 [salt.state       :1780][INFO    ][3114] Running state [cfg01.mcp-odl-ha.local] at time 23:37:30.959720
2019-01-18 23:37:30,959 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cfg01.mcp-odl-ha.local]
2019-01-18 23:37:30,960 [salt.state       :300 ][INFO    ][3114] {'host': 'cfg01.mcp-odl-ha.local'}
2019-01-18 23:37:30,960 [salt.state       :1951][INFO    ][3114] Completed state [cfg01.mcp-odl-ha.local] at time 23:37:30.960945 duration_in_ms=1.226
2019-01-18 23:37:30,961 [salt.state       :1780][INFO    ][3114] Running state [prx01] at time 23:37:30.961263
2019-01-18 23:37:30,962 [salt.state       :1813][INFO    ][3114] Executing state host.present for [prx01]
2019-01-18 23:37:30,963 [salt.state       :300 ][INFO    ][3114] {'host': 'prx01'}
2019-01-18 23:37:30,963 [salt.state       :1951][INFO    ][3114] Completed state [prx01] at time 23:37:30.963317 duration_in_ms=2.054
2019-01-18 23:37:30,963 [salt.state       :1780][INFO    ][3114] Running state [prx01.mcp-odl-ha.local] at time 23:37:30.963647
2019-01-18 23:37:30,963 [salt.state       :1813][INFO    ][3114] Executing state host.present for [prx01.mcp-odl-ha.local]
2019-01-18 23:37:30,964 [salt.state       :300 ][INFO    ][3114] {'host': 'prx01.mcp-odl-ha.local'}
2019-01-18 23:37:30,964 [salt.state       :1951][INFO    ][3114] Completed state [prx01.mcp-odl-ha.local] at time 23:37:30.964860 duration_in_ms=1.214
2019-01-18 23:37:30,965 [salt.state       :1780][INFO    ][3114] Running state [kvm01] at time 23:37:30.965177
2019-01-18 23:37:30,965 [salt.state       :1813][INFO    ][3114] Executing state host.present for [kvm01]
2019-01-18 23:37:30,966 [salt.state       :300 ][INFO    ][3114] {'host': 'kvm01'}
2019-01-18 23:37:30,966 [salt.state       :1951][INFO    ][3114] Completed state [kvm01] at time 23:37:30.966763 duration_in_ms=1.586
2019-01-18 23:37:30,967 [salt.state       :1780][INFO    ][3114] Running state [kvm01.mcp-odl-ha.local] at time 23:37:30.967090
2019-01-18 23:37:30,967 [salt.state       :1813][INFO    ][3114] Executing state host.present for [kvm01.mcp-odl-ha.local]
2019-01-18 23:37:30,968 [salt.state       :300 ][INFO    ][3114] {'host': 'kvm01.mcp-odl-ha.local'}
2019-01-18 23:37:30,968 [salt.state       :1951][INFO    ][3114] Completed state [kvm01.mcp-odl-ha.local] at time 23:37:30.968332 duration_in_ms=1.241
2019-01-18 23:37:30,968 [salt.state       :1780][INFO    ][3114] Running state [kvm03] at time 23:37:30.968690
2019-01-18 23:37:30,968 [salt.state       :1813][INFO    ][3114] Executing state host.present for [kvm03]
2019-01-18 23:37:30,970 [salt.state       :300 ][INFO    ][3114] {'host': 'kvm03'}
2019-01-18 23:37:30,970 [salt.state       :1951][INFO    ][3114] Completed state [kvm03] at time 23:37:30.970824 duration_in_ms=2.135
2019-01-18 23:37:30,971 [salt.state       :1780][INFO    ][3114] Running state [kvm03.mcp-odl-ha.local] at time 23:37:30.971146
2019-01-18 23:37:30,971 [salt.state       :1813][INFO    ][3114] Executing state host.present for [kvm03.mcp-odl-ha.local]
2019-01-18 23:37:30,972 [salt.state       :300 ][INFO    ][3114] {'host': 'kvm03.mcp-odl-ha.local'}
2019-01-18 23:37:30,972 [salt.state       :1951][INFO    ][3114] Completed state [kvm03.mcp-odl-ha.local] at time 23:37:30.972409 duration_in_ms=1.263
2019-01-18 23:37:30,972 [salt.state       :1780][INFO    ][3114] Running state [kvm02] at time 23:37:30.972728
2019-01-18 23:37:30,972 [salt.state       :1813][INFO    ][3114] Executing state host.present for [kvm02]
2019-01-18 23:37:30,974 [salt.state       :300 ][INFO    ][3114] {'host': 'kvm02'}
2019-01-18 23:37:30,974 [salt.state       :1951][INFO    ][3114] Completed state [kvm02] at time 23:37:30.974591 duration_in_ms=1.863
2019-01-18 23:37:30,974 [salt.state       :1780][INFO    ][3114] Running state [kvm02.mcp-odl-ha.local] at time 23:37:30.974912
2019-01-18 23:37:30,975 [salt.state       :1813][INFO    ][3114] Executing state host.present for [kvm02.mcp-odl-ha.local]
2019-01-18 23:37:30,976 [salt.state       :300 ][INFO    ][3114] {'host': 'kvm02.mcp-odl-ha.local'}
2019-01-18 23:37:30,976 [salt.state       :1951][INFO    ][3114] Completed state [kvm02.mcp-odl-ha.local] at time 23:37:30.976224 duration_in_ms=1.312
2019-01-18 23:37:30,976 [salt.state       :1780][INFO    ][3114] Running state [dbs] at time 23:37:30.976568
2019-01-18 23:37:30,976 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs]
2019-01-18 23:37:30,978 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs'}
2019-01-18 23:37:30,978 [salt.state       :1951][INFO    ][3114] Completed state [dbs] at time 23:37:30.978208 duration_in_ms=1.64
2019-01-18 23:37:30,978 [salt.state       :1780][INFO    ][3114] Running state [dbs.mcp-odl-ha.local] at time 23:37:30.978542
2019-01-18 23:37:30,978 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs.mcp-odl-ha.local]
2019-01-18 23:37:30,979 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs.mcp-odl-ha.local'}
2019-01-18 23:37:30,979 [salt.state       :1951][INFO    ][3114] Completed state [dbs.mcp-odl-ha.local] at time 23:37:30.979816 duration_in_ms=1.274
2019-01-18 23:37:30,980 [salt.state       :1780][INFO    ][3114] Running state [prx] at time 23:37:30.980173
2019-01-18 23:37:30,980 [salt.state       :1813][INFO    ][3114] Executing state host.present for [prx]
2019-01-18 23:37:30,982 [salt.state       :300 ][INFO    ][3114] {'host': 'prx'}
2019-01-18 23:37:30,982 [salt.state       :1951][INFO    ][3114] Completed state [prx] at time 23:37:30.982870 duration_in_ms=2.697
2019-01-18 23:37:30,983 [salt.state       :1780][INFO    ][3114] Running state [prx.mcp-odl-ha.local] at time 23:37:30.983205
2019-01-18 23:37:30,983 [salt.state       :1813][INFO    ][3114] Executing state host.present for [prx.mcp-odl-ha.local]
2019-01-18 23:37:30,984 [salt.state       :300 ][INFO    ][3114] {'host': 'prx.mcp-odl-ha.local'}
2019-01-18 23:37:30,984 [salt.state       :1951][INFO    ][3114] Completed state [prx.mcp-odl-ha.local] at time 23:37:30.984686 duration_in_ms=1.481
2019-01-18 23:37:30,985 [salt.state       :1780][INFO    ][3114] Running state [prx02] at time 23:37:30.985019
2019-01-18 23:37:30,985 [salt.state       :1813][INFO    ][3114] Executing state host.present for [prx02]
2019-01-18 23:37:30,986 [salt.state       :300 ][INFO    ][3114] {'host': 'prx02'}
2019-01-18 23:37:30,986 [salt.state       :1951][INFO    ][3114] Completed state [prx02] at time 23:37:30.986906 duration_in_ms=1.886
2019-01-18 23:37:30,987 [salt.state       :1780][INFO    ][3114] Running state [prx02.mcp-odl-ha.local] at time 23:37:30.987244
2019-01-18 23:37:30,987 [salt.state       :1813][INFO    ][3114] Executing state host.present for [prx02.mcp-odl-ha.local]
2019-01-18 23:37:30,988 [salt.state       :300 ][INFO    ][3114] {'host': 'prx02.mcp-odl-ha.local'}
2019-01-18 23:37:30,988 [salt.state       :1951][INFO    ][3114] Completed state [prx02.mcp-odl-ha.local] at time 23:37:30.988536 duration_in_ms=1.293
2019-01-18 23:37:30,988 [salt.state       :1780][INFO    ][3114] Running state [msg02] at time 23:37:30.988865
2019-01-18 23:37:30,989 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg02]
2019-01-18 23:37:30,989 [salt.state       :300 ][INFO    ][3114] {'host': 'msg02'}
2019-01-18 23:37:30,990 [salt.state       :1951][INFO    ][3114] Completed state [msg02] at time 23:37:30.990125 duration_in_ms=1.259
2019-01-18 23:37:30,990 [salt.state       :1780][INFO    ][3114] Running state [msg02.mcp-odl-ha.local] at time 23:37:30.990490
2019-01-18 23:37:30,990 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg02.mcp-odl-ha.local]
2019-01-18 23:37:30,991 [salt.state       :300 ][INFO    ][3114] {'host': 'msg02.mcp-odl-ha.local'}
2019-01-18 23:37:30,991 [salt.state       :1951][INFO    ][3114] Completed state [msg02.mcp-odl-ha.local] at time 23:37:30.991758 duration_in_ms=1.269
2019-01-18 23:37:30,992 [salt.state       :1780][INFO    ][3114] Running state [msg03] at time 23:37:30.992107
2019-01-18 23:37:30,992 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg03]
2019-01-18 23:37:30,993 [salt.state       :300 ][INFO    ][3114] {'host': 'msg03'}
2019-01-18 23:37:30,994 [salt.state       :1951][INFO    ][3114] Completed state [msg03] at time 23:37:30.994827 duration_in_ms=2.72
2019-01-18 23:37:30,995 [salt.state       :1780][INFO    ][3114] Running state [msg03.mcp-odl-ha.local] at time 23:37:30.995171
2019-01-18 23:37:30,995 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg03.mcp-odl-ha.local]
2019-01-18 23:37:30,996 [salt.state       :300 ][INFO    ][3114] {'host': 'msg03.mcp-odl-ha.local'}
2019-01-18 23:37:30,996 [salt.state       :1951][INFO    ][3114] Completed state [msg03.mcp-odl-ha.local] at time 23:37:30.996526 duration_in_ms=1.355
2019-01-18 23:37:30,996 [salt.state       :1780][INFO    ][3114] Running state [msg01] at time 23:37:30.996862
2019-01-18 23:37:30,997 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg01]
2019-01-18 23:37:30,998 [salt.state       :300 ][INFO    ][3114] {'host': 'msg01'}
2019-01-18 23:37:30,999 [salt.state       :1951][INFO    ][3114] Completed state [msg01] at time 23:37:30.999058 duration_in_ms=2.196
2019-01-18 23:37:30,999 [salt.state       :1780][INFO    ][3114] Running state [msg01.mcp-odl-ha.local] at time 23:37:30.999390
2019-01-18 23:37:30,999 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg01.mcp-odl-ha.local]
2019-01-18 23:37:31,000 [salt.state       :300 ][INFO    ][3114] {'host': 'msg01.mcp-odl-ha.local'}
2019-01-18 23:37:31,000 [salt.state       :1951][INFO    ][3114] Completed state [msg01.mcp-odl-ha.local] at time 23:37:31.000722 duration_in_ms=1.333
2019-01-18 23:37:31,001 [salt.state       :1780][INFO    ][3114] Running state [msg] at time 23:37:31.001067
2019-01-18 23:37:31,001 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg]
2019-01-18 23:37:31,002 [salt.state       :300 ][INFO    ][3114] {'host': 'msg'}
2019-01-18 23:37:31,002 [salt.state       :1951][INFO    ][3114] Completed state [msg] at time 23:37:31.002407 duration_in_ms=1.341
2019-01-18 23:37:31,002 [salt.state       :1780][INFO    ][3114] Running state [msg.mcp-odl-ha.local] at time 23:37:31.002740
2019-01-18 23:37:31,002 [salt.state       :1813][INFO    ][3114] Executing state host.present for [msg.mcp-odl-ha.local]
2019-01-18 23:37:31,003 [salt.state       :300 ][INFO    ][3114] {'host': 'msg.mcp-odl-ha.local'}
2019-01-18 23:37:31,004 [salt.state       :1951][INFO    ][3114] Completed state [msg.mcp-odl-ha.local] at time 23:37:31.004062 duration_in_ms=1.322
2019-01-18 23:37:31,004 [salt.state       :1780][INFO    ][3114] Running state [cfg01] at time 23:37:31.004420
2019-01-18 23:37:31,004 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cfg01]
2019-01-18 23:37:31,005 [salt.state       :300 ][INFO    ][3114] Host cfg01 (192.168.10.11) already present
2019-01-18 23:37:31,005 [salt.state       :1951][INFO    ][3114] Completed state [cfg01] at time 23:37:31.005202 duration_in_ms=0.782
2019-01-18 23:37:31,006 [salt.state       :1780][INFO    ][3114] Running state [cfg01.mcp-odl-ha.local] at time 23:37:31.006713
2019-01-18 23:37:31,006 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cfg01.mcp-odl-ha.local]
2019-01-18 23:37:31,007 [salt.state       :300 ][INFO    ][3114] Host cfg01.mcp-odl-ha.local (192.168.10.11) already present
2019-01-18 23:37:31,007 [salt.state       :1951][INFO    ][3114] Completed state [cfg01.mcp-odl-ha.local] at time 23:37:31.007511 duration_in_ms=0.797
2019-01-18 23:37:31,007 [salt.state       :1780][INFO    ][3114] Running state [cmp002] at time 23:37:31.007825
2019-01-18 23:37:31,008 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cmp002]
2019-01-18 23:37:31,009 [salt.state       :300 ][INFO    ][3114] {'host': 'cmp002'}
2019-01-18 23:37:31,009 [salt.state       :1951][INFO    ][3114] Completed state [cmp002] at time 23:37:31.009309 duration_in_ms=1.483
2019-01-18 23:37:31,010 [salt.state       :1780][INFO    ][3114] Running state [cmp002.mcp-odl-ha.local] at time 23:37:31.010298
2019-01-18 23:37:31,010 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cmp002.mcp-odl-ha.local]
2019-01-18 23:37:31,011 [salt.state       :300 ][INFO    ][3114] {'host': 'cmp002.mcp-odl-ha.local'}
2019-01-18 23:37:31,011 [salt.state       :1951][INFO    ][3114] Completed state [cmp002.mcp-odl-ha.local] at time 23:37:31.011635 duration_in_ms=1.338
2019-01-18 23:37:31,012 [salt.state       :1780][INFO    ][3114] Running state [cmp001] at time 23:37:31.012007
2019-01-18 23:37:31,012 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cmp001]
2019-01-18 23:37:31,013 [salt.state       :300 ][INFO    ][3114] {'host': 'cmp001'}
2019-01-18 23:37:31,013 [salt.state       :1951][INFO    ][3114] Completed state [cmp001] at time 23:37:31.013671 duration_in_ms=1.664
2019-01-18 23:37:31,014 [salt.state       :1780][INFO    ][3114] Running state [cmp001.mcp-odl-ha.local] at time 23:37:31.014025
2019-01-18 23:37:31,014 [salt.state       :1813][INFO    ][3114] Executing state host.present for [cmp001.mcp-odl-ha.local]
2019-01-18 23:37:31,015 [salt.state       :300 ][INFO    ][3114] {'host': 'cmp001.mcp-odl-ha.local'}
2019-01-18 23:37:31,015 [salt.state       :1951][INFO    ][3114] Completed state [cmp001.mcp-odl-ha.local] at time 23:37:31.015435 duration_in_ms=1.41
2019-01-18 23:37:31,015 [salt.state       :1780][INFO    ][3114] Running state [dbs01] at time 23:37:31.015802
2019-01-18 23:37:31,016 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs01]
2019-01-18 23:37:31,017 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs01'}
2019-01-18 23:37:31,017 [salt.state       :1951][INFO    ][3114] Completed state [dbs01] at time 23:37:31.017250 duration_in_ms=1.447
2019-01-18 23:37:31,019 [salt.state       :1780][INFO    ][3114] Running state [dbs01.mcp-odl-ha.local] at time 23:37:31.019289
2019-01-18 23:37:31,019 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs01.mcp-odl-ha.local]
2019-01-18 23:37:31,020 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs01.mcp-odl-ha.local'}
2019-01-18 23:37:31,020 [salt.state       :1951][INFO    ][3114] Completed state [dbs01.mcp-odl-ha.local] at time 23:37:31.020732 duration_in_ms=1.443
2019-01-18 23:37:31,021 [salt.state       :1780][INFO    ][3114] Running state [dbs02] at time 23:37:31.021076
2019-01-18 23:37:31,021 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs02]
2019-01-18 23:37:31,022 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs02'}
2019-01-18 23:37:31,022 [salt.state       :1951][INFO    ][3114] Completed state [dbs02] at time 23:37:31.022804 duration_in_ms=1.727
2019-01-18 23:37:31,023 [salt.state       :1780][INFO    ][3114] Running state [dbs02.mcp-odl-ha.local] at time 23:37:31.023145
2019-01-18 23:37:31,023 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs02.mcp-odl-ha.local]
2019-01-18 23:37:31,024 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs02.mcp-odl-ha.local'}
2019-01-18 23:37:31,024 [salt.state       :1951][INFO    ][3114] Completed state [dbs02.mcp-odl-ha.local] at time 23:37:31.024587 duration_in_ms=1.442
2019-01-18 23:37:31,024 [salt.state       :1780][INFO    ][3114] Running state [dbs03] at time 23:37:31.024959
2019-01-18 23:37:31,025 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs03]
2019-01-18 23:37:31,026 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs03'}
2019-01-18 23:37:31,026 [salt.state       :1951][INFO    ][3114] Completed state [dbs03] at time 23:37:31.026865 duration_in_ms=1.906
2019-01-18 23:37:31,027 [salt.state       :1780][INFO    ][3114] Running state [dbs03.mcp-odl-ha.local] at time 23:37:31.027223
2019-01-18 23:37:31,027 [salt.state       :1813][INFO    ][3114] Executing state host.present for [dbs03.mcp-odl-ha.local]
2019-01-18 23:37:31,028 [salt.state       :300 ][INFO    ][3114] {'host': 'dbs03.mcp-odl-ha.local'}
2019-01-18 23:37:31,028 [salt.state       :1951][INFO    ][3114] Completed state [dbs03.mcp-odl-ha.local] at time 23:37:31.028663 duration_in_ms=1.44
2019-01-18 23:37:31,029 [salt.state       :1780][INFO    ][3114] Running state [odl02] at time 23:37:31.029006
2019-01-18 23:37:31,029 [salt.state       :1813][INFO    ][3114] Executing state host.present for [odl02]
2019-01-18 23:37:31,031 [salt.state       :300 ][INFO    ][3114] {'host': 'odl02'}
2019-01-18 23:37:31,031 [salt.state       :1951][INFO    ][3114] Completed state [odl02] at time 23:37:31.031820 duration_in_ms=2.814
2019-01-18 23:37:31,032 [salt.state       :1780][INFO    ][3114] Running state [odl02.mcp-odl-ha.local] at time 23:37:31.032197
2019-01-18 23:37:31,032 [salt.state       :1813][INFO    ][3114] Executing state host.present for [odl02.mcp-odl-ha.local]
2019-01-18 23:37:31,033 [salt.state       :300 ][INFO    ][3114] {'host': 'odl02.mcp-odl-ha.local'}
2019-01-18 23:37:31,033 [salt.state       :1951][INFO    ][3114] Completed state [odl02.mcp-odl-ha.local] at time 23:37:31.033900 duration_in_ms=1.703
2019-01-18 23:37:31,034 [salt.state       :1780][INFO    ][3114] Running state [odl03] at time 23:37:31.034296
2019-01-18 23:37:31,034 [salt.state       :1813][INFO    ][3114] Executing state host.present for [odl03]
2019-01-18 23:37:31,035 [salt.state       :300 ][INFO    ][3114] {'host': 'odl03'}
2019-01-18 23:37:31,035 [salt.state       :1951][INFO    ][3114] Completed state [odl03] at time 23:37:31.035673 duration_in_ms=1.378
2019-01-18 23:37:31,036 [salt.state       :1780][INFO    ][3114] Running state [odl03.mcp-odl-ha.local] at time 23:37:31.036043
2019-01-18 23:37:31,036 [salt.state       :1813][INFO    ][3114] Executing state host.present for [odl03.mcp-odl-ha.local]
2019-01-18 23:37:31,037 [salt.state       :300 ][INFO    ][3114] {'host': 'odl03.mcp-odl-ha.local'}
2019-01-18 23:37:31,038 [salt.state       :1951][INFO    ][3114] Completed state [odl03.mcp-odl-ha.local] at time 23:37:31.038036 duration_in_ms=1.993
2019-01-18 23:37:31,038 [salt.state       :1780][INFO    ][3114] Running state [odl01] at time 23:37:31.038437
2019-01-18 23:37:31,038 [salt.state       :1813][INFO    ][3114] Executing state host.present for [odl01]
2019-01-18 23:37:31,039 [salt.state       :300 ][INFO    ][3114] {'host': 'odl01'}
2019-01-18 23:37:31,039 [salt.state       :1951][INFO    ][3114] Completed state [odl01] at time 23:37:31.039840 duration_in_ms=1.403
2019-01-18 23:37:31,040 [salt.state       :1780][INFO    ][3114] Running state [odl01.mcp-odl-ha.local] at time 23:37:31.040265
2019-01-18 23:37:31,040 [salt.state       :1813][INFO    ][3114] Executing state host.present for [odl01.mcp-odl-ha.local]
2019-01-18 23:37:31,042 [salt.state       :300 ][INFO    ][3114] {'host': 'odl01.mcp-odl-ha.local'}
2019-01-18 23:37:31,042 [salt.state       :1951][INFO    ][3114] Completed state [odl01.mcp-odl-ha.local] at time 23:37:31.042865 duration_in_ms=2.6
2019-01-18 23:37:31,043 [salt.state       :1780][INFO    ][3114] Running state [mas01] at time 23:37:31.043213
2019-01-18 23:37:31,043 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mas01]
2019-01-18 23:37:31,044 [salt.state       :300 ][INFO    ][3114] {'host': 'mas01'}
2019-01-18 23:37:31,044 [salt.state       :1951][INFO    ][3114] Completed state [mas01] at time 23:37:31.044827 duration_in_ms=1.613
2019-01-18 23:37:31,045 [salt.state       :1780][INFO    ][3114] Running state [mas01.mcp-odl-ha.local] at time 23:37:31.045221
2019-01-18 23:37:31,046 [salt.state       :1813][INFO    ][3114] Executing state host.present for [mas01.mcp-odl-ha.local]
2019-01-18 23:37:31,047 [salt.state       :300 ][INFO    ][3114] {'host': 'mas01.mcp-odl-ha.local'}
2019-01-18 23:37:31,047 [salt.state       :1951][INFO    ][3114] Completed state [mas01.mcp-odl-ha.local] at time 23:37:31.047849 duration_in_ms=2.628
2019-01-18 23:37:31,048 [salt.state       :1780][INFO    ][3114] Running state [ctl02] at time 23:37:31.048262
2019-01-18 23:37:31,048 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl02]
2019-01-18 23:37:31,049 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl02'}
2019-01-18 23:37:31,049 [salt.state       :1951][INFO    ][3114] Completed state [ctl02] at time 23:37:31.049655 duration_in_ms=1.393
2019-01-18 23:37:31,050 [salt.state       :1780][INFO    ][3114] Running state [ctl02.mcp-odl-ha.local] at time 23:37:31.050012
2019-01-18 23:37:31,050 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl02.mcp-odl-ha.local]
2019-01-18 23:37:31,051 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl02.mcp-odl-ha.local'}
2019-01-18 23:37:31,051 [salt.state       :1951][INFO    ][3114] Completed state [ctl02.mcp-odl-ha.local] at time 23:37:31.051447 duration_in_ms=1.435
2019-01-18 23:37:31,051 [salt.state       :1780][INFO    ][3114] Running state [ctl03] at time 23:37:31.051798
2019-01-18 23:37:31,052 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl03]
2019-01-18 23:37:31,053 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl03'}
2019-01-18 23:37:31,053 [salt.state       :1951][INFO    ][3114] Completed state [ctl03] at time 23:37:31.053286 duration_in_ms=1.489
2019-01-18 23:37:31,055 [salt.state       :1780][INFO    ][3114] Running state [ctl03.mcp-odl-ha.local] at time 23:37:31.055053
2019-01-18 23:37:31,055 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl03.mcp-odl-ha.local]
2019-01-18 23:37:31,056 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl03.mcp-odl-ha.local'}
2019-01-18 23:37:31,056 [salt.state       :1951][INFO    ][3114] Completed state [ctl03.mcp-odl-ha.local] at time 23:37:31.056567 duration_in_ms=1.513
2019-01-18 23:37:31,056 [salt.state       :1780][INFO    ][3114] Running state [ctl01] at time 23:37:31.056940
2019-01-18 23:37:31,057 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl01]
2019-01-18 23:37:31,058 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl01'}
2019-01-18 23:37:31,058 [salt.state       :1951][INFO    ][3114] Completed state [ctl01] at time 23:37:31.058775 duration_in_ms=1.835
2019-01-18 23:37:31,059 [salt.state       :1780][INFO    ][3114] Running state [ctl01.mcp-odl-ha.local] at time 23:37:31.059137
2019-01-18 23:37:31,059 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl01.mcp-odl-ha.local]
2019-01-18 23:37:31,060 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl01.mcp-odl-ha.local'}
2019-01-18 23:37:31,060 [salt.state       :1951][INFO    ][3114] Completed state [ctl01.mcp-odl-ha.local] at time 23:37:31.060838 duration_in_ms=1.701
2019-01-18 23:37:31,061 [salt.state       :1780][INFO    ][3114] Running state [ctl] at time 23:37:31.061234
2019-01-18 23:37:31,061 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl]
2019-01-18 23:37:31,063 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl'}
2019-01-18 23:37:31,063 [salt.state       :1951][INFO    ][3114] Completed state [ctl] at time 23:37:31.063201 duration_in_ms=1.968
2019-01-18 23:37:31,063 [salt.state       :1780][INFO    ][3114] Running state [ctl.mcp-odl-ha.local] at time 23:37:31.063568
2019-01-18 23:37:31,063 [salt.state       :1813][INFO    ][3114] Executing state host.present for [ctl.mcp-odl-ha.local]
2019-01-18 23:37:31,064 [salt.state       :300 ][INFO    ][3114] {'host': 'ctl.mcp-odl-ha.local'}
2019-01-18 23:37:31,065 [salt.state       :1951][INFO    ][3114] Completed state [ctl.mcp-odl-ha.local] at time 23:37:31.065090 duration_in_ms=1.522
2019-01-18 23:37:31,066 [salt.state       :1780][INFO    ][3114] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 23:37:31.065311
2019-01-18 23:37:31,066 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2019-01-18 23:37:31,067 [salt.state       :300 ][INFO    ][3114] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2019-01-18 23:37:31,067 [salt.state       :1951][INFO    ][3114] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 23:37:31.067526 duration_in_ms=2.215
2019-01-18 23:37:31,068 [salt.state       :1780][INFO    ][3114] Running state [ens3] at time 23:37:31.068246
2019-01-18 23:37:31,068 [salt.state       :1813][INFO    ][3114] Executing state network.managed for [ens3]
2019-01-18 23:37:31,094 [salt.minion      :1308][INFO    ][3025] User sudo_ubuntu Executing command saltutil.find_job with jid 20190118233731074617
2019-01-18 23:37:31,120 [salt.minion      :1432][INFO    ][5104] Starting a new job with PID 5104
2019-01-18 23:37:31,143 [salt.minion      :1711][INFO    ][5104] Returning information for job: 20190118233731074617
2019-01-18 23:37:31,228 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['ifup', 'ens3'] in directory '/root'
2019-01-18 23:37:31,944 [salt.state       :300 ][INFO    ][3114] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2019-01-18 23:37:31,944 [salt.state       :1951][INFO    ][3114] Completed state [ens3] at time 23:37:31.944639 duration_in_ms=876.392
2019-01-18 23:37:31,945 [salt.state       :1780][INFO    ][3114] Running state [ens2] at time 23:37:31.944975
2019-01-18 23:37:31,945 [salt.state       :1813][INFO    ][3114] Executing state network.managed for [ens2]
2019-01-18 23:37:31,974 [salt.state       :300 ][INFO    ][3114] {'interface': 'Added network interface.'}
2019-01-18 23:37:31,975 [salt.state       :1951][INFO    ][3114] Completed state [ens2] at time 23:37:31.975354 duration_in_ms=30.377
2019-01-18 23:37:31,975 [salt.state       :1780][INFO    ][3114] Running state [linux_system_network] at time 23:37:31.975766
2019-01-18 23:37:31,976 [salt.state       :1813][INFO    ][3114] Executing state network.system for [linux_system_network]
2019-01-18 23:37:31,977 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2019-01-18 23:37:31,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2019-01-18 23:37:32,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2019-01-18 23:37:32,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2019-01-18 23:37:32,484 [salt.loaded.int.module.debian_ip:1964][WARNING ][3114] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-01-18 23:37:32,485 [salt.state       :300 ][INFO    ][3114] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb02\n\n+DOMAIN=mcp-odl-ha.local\n\n+SEARCH=maas\n'}
2019-01-18 23:37:32,486 [salt.state       :1951][INFO    ][3114] Completed state [linux_system_network] at time 23:37:32.486171 duration_in_ms=510.403
2019-01-18 23:37:32,487 [salt.state       :1780][INFO    ][3114] Running state [/etc/profile.d/proxy.sh] at time 23:37:32.487042
2019-01-18 23:37:32,487 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/profile.d/proxy.sh]
2019-01-18 23:37:32,488 [salt.state       :300 ][INFO    ][3114] File /etc/profile.d/proxy.sh is not present
2019-01-18 23:37:32,488 [salt.state       :1951][INFO    ][3114] Completed state [/etc/profile.d/proxy.sh] at time 23:37:32.488800 duration_in_ms=1.758
2019-01-18 23:37:32,489 [salt.state       :1780][INFO    ][3114] Running state [/etc/apt/apt.conf.d/95proxies] at time 23:37:32.489240
2019-01-18 23:37:32,490 [salt.state       :1813][INFO    ][3114] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2019-01-18 23:37:32,490 [salt.state       :300 ][INFO    ][3114] File /etc/apt/apt.conf.d/95proxies is not present
2019-01-18 23:37:32,491 [salt.state       :1951][INFO    ][3114] Completed state [/etc/apt/apt.conf.d/95proxies] at time 23:37:32.491302 duration_in_ms=2.062
2019-01-18 23:37:32,492 [salt.state       :1780][INFO    ][3114] Running state [/dev/shm] at time 23:37:32.492743
2019-01-18 23:37:32,493 [salt.state       :1813][INFO    ][3114] Executing state mount.mounted for [/dev/shm]
2019-01-18 23:37:32,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'mount -l' in directory '/root'
2019-01-18 23:37:32,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'blkid' in directory '/root'
2019-01-18 23:37:32,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'mount -l' in directory '/root'
2019-01-18 23:37:32,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-01-18 23:37:32,564 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'mount -l' in directory '/root'
2019-01-18 23:37:32,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-01-18 23:37:32,597 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'mount -l' in directory '/root'
2019-01-18 23:37:32,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'umount /dev/shm' in directory '/root'
2019-01-18 23:37:32,627 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3114] Command '['umount', '/dev/shm']' failed with return code: 32
2019-01-18 23:37:32,628 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3114] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-01-18 23:37:32,629 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3114] retcode: 32
2019-01-18 23:37:32,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'mount -l' in directory '/root'
2019-01-18 23:37:32,644 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command 'blkid' in directory '/root'
2019-01-18 23:37:32,658 [salt.state       :300 ][INFO    ][3114] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2019-01-18 23:37:32,659 [salt.state       :1951][INFO    ][3114] Completed state [/dev/shm] at time 23:37:32.659342 duration_in_ms=166.598
2019-01-18 23:37:32,662 [salt.state       :1780][INFO    ][3114] Running state [ntp] at time 23:37:32.661982
2019-01-18 23:37:32,662 [salt.state       :1813][INFO    ][3114] Executing state pkg.installed for [ntp]
2019-01-18 23:37:32,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-18 23:37:32,899 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2019-01-18 23:37:35,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:37:36,019 [salt.state       :300 ][INFO    ][3114] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2019-01-18 23:37:36,038 [salt.state       :915 ][INFO    ][3114] Loading fresh modules for state activity
2019-01-18 23:37:36,078 [salt.state       :1951][INFO    ][3114] Completed state [ntp] at time 23:37:36.078517 duration_in_ms=3416.534
2019-01-18 23:37:36,084 [salt.state       :1780][INFO    ][3114] Running state [/etc/ntp.conf] at time 23:37:36.084739
2019-01-18 23:37:36,085 [salt.state       :1813][INFO    ][3114] Executing state file.managed for [/etc/ntp.conf]
2019-01-18 23:37:36,109 [salt.fileclient  :1219][INFO    ][3114] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2019-01-18 23:37:36,176 [salt.state       :300 ][INFO    ][3114] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2019-01-18 23:37:36,184 [salt.state       :1951][INFO    ][3114] Completed state [/etc/ntp.conf] at time 23:37:36.184556 duration_in_ms=99.816
2019-01-18 23:37:36,630 [salt.state       :1780][INFO    ][3114] Running state [ntp] at time 23:37:36.630837
2019-01-18 23:37:36,631 [salt.state       :1813][INFO    ][3114] Executing state service.running for [ntp]
2019-01-18 23:37:36,635 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2019-01-18 23:37:36,649 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-01-18 23:37:36,663 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2019-01-18 23:37:36,685 [salt.state       :300 ][INFO    ][3114] The service ntp is already running
2019-01-18 23:37:36,686 [salt.state       :1951][INFO    ][3114] Completed state [ntp] at time 23:37:36.685926 duration_in_ms=55.089
2019-01-18 23:37:36,686 [salt.state       :1780][INFO    ][3114] Running state [ntp] at time 23:37:36.686314
2019-01-18 23:37:36,686 [salt.state       :1813][INFO    ][3114] Executing state service.mod_watch for [ntp]
2019-01-18 23:37:36,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-01-18 23:37:36,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3114] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2019-01-18 23:37:36,787 [salt.state       :300 ][INFO    ][3114] {'ntp': True}
2019-01-18 23:37:36,788 [salt.state       :1951][INFO    ][3114] Completed state [ntp] at time 23:37:36.787992 duration_in_ms=101.678
2019-01-18 23:37:36,795 [salt.minion      :1711][INFO    ][3114] Returning information for job: 20190118233650533138
2019-01-18 23:37:46,063 [salt.minion      :1308][INFO    ][3025] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20190118233746045923
2019-01-18 23:37:46,084 [salt.minion      :1432][INFO    ][6383] Starting a new job with PID 6383
2019-01-18 23:37:46,106 [salt.minion      :1711][INFO    ][6383] Returning information for job: 20190118233746045923
2019-01-18 23:37:46,866 [salt.minion      :1308][INFO    ][3025] User sudo_ubuntu Executing command system.reboot with jid 20190118233746849697
2019-01-18 23:37:46,890 [salt.minion      :1432][INFO    ][6388] Starting a new job with PID 6388
2019-01-18 23:37:46,898 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6388] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2019-01-18 23:37:47,091 [salt.utils.parsers:1051][WARNING ][3025] Minion received a SIGTERM. Exiting.
2019-01-18 23:37:47,091 [salt.cli.daemons :82  ][INFO    ][3025] Shutting down the Salt Minion
2019-01-18 23:37:47,833 [salt.minion      :1711][INFO    ][6388] Returning information for job: 20190118233746849697
2019-01-18 23:38:00,288 [salt.cli.daemons :293 ][INFO    ][1415] Setting up the Salt Minion "mdb02.mcp-odl-ha.local"
2019-01-18 23:38:00,704 [salt.cli.daemons :82  ][INFO    ][1415] Starting up the Salt Minion
2019-01-18 23:38:00,705 [salt.utils.event :1017][INFO    ][1415] Starting pull socket on /var/run/salt/minion/minion_event_1babc43147_pull.ipc
2019-01-18 23:38:01,509 [salt.minion      :976 ][INFO    ][1415] Creating minion process manager
2019-01-18 23:38:02,983 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1415] Executing command ['date', '+%z'] in directory '/root'
2019-01-18 23:38:03,008 [salt.utils.schedule:568 ][INFO    ][1415] Updating job settings for scheduled job: __mine_interval
2019-01-18 23:38:03,010 [salt.minion      :1108][INFO    ][1415] Added mine.update to scheduler
2019-01-18 23:38:03,016 [salt.minion      :1975][INFO    ][1415] Minion is starting as user 'root'
2019-01-18 23:38:03,029 [salt.minion      :2336][INFO    ][1415] Minion is ready to receive requests!
2019-01-18 23:38:07,814 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command test.ping with jid 20190118233807803742
2019-01-18 23:38:07,835 [salt.minion      :1432][INFO    ][1553] Starting a new job with PID 1553
2019-01-18 23:38:07,876 [salt.minion      :1711][INFO    ][1553] Returning information for job: 20190118233807803742
2019-01-18 23:38:08,628 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command pkg.upgrade with jid 20190118233808613784
2019-01-18 23:38:08,646 [salt.minion      :1432][INFO    ][1558] Starting a new job with PID 1558
2019-01-18 23:38:08,751 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1558] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:38:09,435 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1558] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2019-01-18 23:38:18,673 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190118233818654031
2019-01-18 23:38:18,688 [salt.minion      :1432][INFO    ][2770] Starting a new job with PID 2770
2019-01-18 23:38:18,719 [salt.minion      :1711][INFO    ][2770] Returning information for job: 20190118233818654031
2019-01-18 23:38:24,788 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1558] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:38:24,820 [salt.minion      :1711][INFO    ][1558] Returning information for job: 20190118233808613784
2019-01-18 23:45:22,194 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command test.ping with jid 20190118234522187257
2019-01-18 23:45:22,217 [salt.minion      :1432][INFO    ][3065] Starting a new job with PID 3065
2019-01-18 23:45:22,240 [salt.minion      :1711][INFO    ][3065] Returning information for job: 20190118234522187257
2019-01-18 23:45:40,054 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190118234540042903
2019-01-18 23:45:40,076 [salt.minion      :1432][INFO    ][3070] Starting a new job with PID 3070
2019-01-18 23:45:41,069 [salt.state       :915 ][INFO    ][3070] Loading fresh modules for state activity
2019-01-18 23:45:41,138 [salt.fileclient  :1219][INFO    ][3070] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2019-01-18 23:45:41,176 [salt.fileclient  :1219][INFO    ][3070] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2019-01-18 23:45:42,273 [salt.state       :1780][INFO    ][3070] Running state [keepalived] at time 23:45:42.273465
2019-01-18 23:45:42,273 [salt.state       :1813][INFO    ][3070] Executing state pkg.installed for [keepalived]
2019-01-18 23:45:42,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:45:42,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2019-01-18 23:45:42,656 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-18 23:45:44,535 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-18 23:45:44,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2019-01-18 23:45:48,290 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-18 23:45:48,327 [salt.state       :300 ][INFO    ][3070] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.2.24-1ubuntu0.16.04.1'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2019-01-18 23:45:48,350 [salt.state       :915 ][INFO    ][3070] Loading fresh modules for state activity
2019-01-18 23:45:48,385 [salt.state       :1951][INFO    ][3070] Completed state [keepalived] at time 23:45:48.385820 duration_in_ms=6112.355
2019-01-18 23:45:48,390 [salt.state       :1780][INFO    ][3070] Running state [lsof] at time 23:45:48.390813
2019-01-18 23:45:48,391 [salt.state       :1813][INFO    ][3070] Executing state pkg.installed for [lsof]
2019-01-18 23:45:49,019 [salt.state       :300 ][INFO    ][3070] All specified packages are already installed
2019-01-18 23:45:49,019 [salt.state       :1951][INFO    ][3070] Completed state [lsof] at time 23:45:49.019822 duration_in_ms=629.008
2019-01-18 23:45:49,024 [salt.state       :1780][INFO    ][3070] Running state [/etc/keepalived/keepalived.conf] at time 23:45:49.024195
2019-01-18 23:45:49,024 [salt.state       :1813][INFO    ][3070] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2019-01-18 23:45:49,057 [salt.fileclient  :1219][INFO    ][3070] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2019-01-18 23:45:49,111 [salt.state       :300 ][INFO    ][3070] File changed:
New file
2019-01-18 23:45:49,111 [salt.state       :1951][INFO    ][3070] Completed state [/etc/keepalived/keepalived.conf] at time 23:45:49.111283 duration_in_ms=87.088
2019-01-18 23:45:49,112 [salt.state       :1780][INFO    ][3070] Running state [keepalived] at time 23:45:49.112652
2019-01-18 23:45:49,112 [salt.state       :1813][INFO    ][3070] Executing state service.running for [keepalived]
2019-01-18 23:45:49,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2019-01-18 23:45:49,133 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-01-18 23:45:49,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-01-18 23:45:49,159 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2019-01-18 23:45:49,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-01-18 23:45:49,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-01-18 23:45:49,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3070] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-01-18 23:45:49,272 [salt.state       :300 ][INFO    ][3070] {'keepalived': True}
2019-01-18 23:45:49,272 [salt.state       :1951][INFO    ][3070] Completed state [keepalived] at time 23:45:49.272788 duration_in_ms=160.132
2019-01-18 23:45:49,274 [salt.minion      :1711][INFO    ][3070] Returning information for job: 20190118234540042903
2019-01-18 23:50:22,713 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command pillar.get with jid 20190118235022703352
2019-01-18 23:50:22,733 [salt.minion      :1432][INFO    ][4400] Starting a new job with PID 4400
2019-01-18 23:50:22,741 [salt.minion      :1711][INFO    ][4400] Returning information for job: 20190118235022703352
2019-01-19 00:01:44,301 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190119000144292263
2019-01-19 00:01:44,317 [salt.minion      :1432][INFO    ][4423] Starting a new job with PID 4423
2019-01-19 00:01:52,447 [salt.state       :915 ][INFO    ][4423] Loading fresh modules for state activity
2019-01-19 00:01:52,510 [salt.fileclient  :1219][INFO    ][4423] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2019-01-19 00:01:52,542 [salt.fileclient  :1219][INFO    ][4423] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2019-01-19 00:01:52,826 [salt.fileclient  :1219][INFO    ][4423] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2019-01-19 00:01:53,464 [salt.state       :1780][INFO    ][4423] Running state [memcached] at time 00:01:53.464770
2019-01-19 00:01:53,465 [salt.state       :1813][INFO    ][4423] Executing state pkg.installed for [memcached]
2019-01-19 00:01:53,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:01:53,765 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2019-01-19 00:01:53,833 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-19 00:01:54,361 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119000154346461
2019-01-19 00:01:54,380 [salt.minion      :1432][INFO    ][4674] Starting a new job with PID 4674
2019-01-19 00:01:54,394 [salt.minion      :1711][INFO    ][4674] Returning information for job: 20190119000154346461
2019-01-19 00:01:55,456 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:01:55,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2019-01-19 00:01:58,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:01:58,329 [salt.state       :300 ][INFO    ][4423] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2019-01-19 00:01:58,348 [salt.state       :915 ][INFO    ][4423] Loading fresh modules for state activity
2019-01-19 00:01:58,386 [salt.state       :1951][INFO    ][4423] Completed state [memcached] at time 00:01:58.385978 duration_in_ms=4921.207
2019-01-19 00:01:58,394 [salt.state       :1780][INFO    ][4423] Running state [python-memcache] at time 00:01:58.394017
2019-01-19 00:01:58,394 [salt.state       :1813][INFO    ][4423] Executing state pkg.installed for [python-memcache]
2019-01-19 00:01:59,000 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:01:59,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2019-01-19 00:02:00,528 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:02:00,575 [salt.state       :300 ][INFO    ][4423] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2019-01-19 00:02:00,591 [salt.state       :915 ][INFO    ][4423] Loading fresh modules for state activity
2019-01-19 00:02:00,625 [salt.state       :1951][INFO    ][4423] Completed state [python-memcache] at time 00:02:00.625589 duration_in_ms=2231.571
2019-01-19 00:02:00,629 [salt.state       :1780][INFO    ][4423] Running state [/etc/memcached.conf] at time 00:02:00.629786
2019-01-19 00:02:00,630 [salt.state       :1813][INFO    ][4423] Executing state file.managed for [/etc/memcached.conf]
2019-01-19 00:02:00,667 [salt.fileclient  :1219][INFO    ][4423] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2019-01-19 00:02:00,709 [salt.state       :300 ][INFO    ][4423] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2019-01-19 00:02:00,716 [salt.state       :1951][INFO    ][4423] Completed state [/etc/memcached.conf] at time 00:02:00.716461 duration_in_ms=86.675
2019-01-19 00:02:01,152 [salt.state       :1780][INFO    ][4423] Running state [memcached] at time 00:02:01.152713
2019-01-19 00:02:01,153 [salt.state       :1813][INFO    ][4423] Executing state service.running for [memcached]
2019-01-19 00:02:01,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2019-01-19 00:02:01,169 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-01-19 00:02:01,185 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2019-01-19 00:02:01,197 [salt.state       :300 ][INFO    ][4423] The service memcached is already running
2019-01-19 00:02:01,198 [salt.state       :1951][INFO    ][4423] Completed state [memcached] at time 00:02:01.198338 duration_in_ms=45.625
2019-01-19 00:02:01,198 [salt.state       :1780][INFO    ][4423] Running state [memcached] at time 00:02:01.198770
2019-01-19 00:02:01,199 [salt.state       :1813][INFO    ][4423] Executing state service.mod_watch for [memcached]
2019-01-19 00:02:01,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-01-19 00:02:01,221 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4423] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2019-01-19 00:02:01,245 [salt.state       :300 ][INFO    ][4423] {'memcached': True}
2019-01-19 00:02:01,246 [salt.state       :1951][INFO    ][4423] Completed state [memcached] at time 00:02:01.246028 duration_in_ms=47.258
2019-01-19 00:02:01,247 [salt.minion      :1711][INFO    ][4423] Returning information for job: 20190119000144292263
2019-01-19 00:02:05,134 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190119000205125138
2019-01-19 00:02:05,163 [salt.minion      :1432][INFO    ][5391] Starting a new job with PID 5391
2019-01-19 00:02:07,006 [salt.state       :915 ][INFO    ][5391] Loading fresh modules for state activity
2019-01-19 00:02:07,058 [salt.fileclient  :1219][INFO    ][5391] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2019-01-19 00:02:07,509 [salt.fileclient  :1219][INFO    ][5391] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2019-01-19 00:02:08,225 [salt.state       :1780][INFO    ][5391] Running state [haproxy] at time 00:02:08.225522
2019-01-19 00:02:08,226 [salt.state       :1813][INFO    ][5391] Executing state pkg.installed for [haproxy]
2019-01-19 00:02:08,227 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:02:08,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2019-01-19 00:02:08,669 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-19 00:02:10,404 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:02:10,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2019-01-19 00:02:13,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:02:14,038 [salt.state       :300 ][INFO    ][5391] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.2'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2019-01-19 00:02:14,064 [salt.state       :915 ][INFO    ][5391] Loading fresh modules for state activity
2019-01-19 00:02:14,116 [salt.state       :1951][INFO    ][5391] Completed state [haproxy] at time 00:02:14.116790 duration_in_ms=5891.267
2019-01-19 00:02:14,124 [salt.state       :1780][INFO    ][5391] Running state [/etc/default/haproxy] at time 00:02:14.124368
2019-01-19 00:02:14,124 [salt.state       :1813][INFO    ][5391] Executing state file.managed for [/etc/default/haproxy]
2019-01-19 00:02:14,169 [salt.fileclient  :1219][INFO    ][5391] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2019-01-19 00:02:14,174 [salt.state       :300 ][INFO    ][5391] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2019-01-19 00:02:14,177 [salt.state       :1951][INFO    ][5391] Completed state [/etc/default/haproxy] at time 00:02:14.177632 duration_in_ms=53.263
2019-01-19 00:02:14,178 [salt.state       :1780][INFO    ][5391] Running state [/etc/haproxy/haproxy.cfg] at time 00:02:14.178246
2019-01-19 00:02:14,178 [salt.state       :1813][INFO    ][5391] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2019-01-19 00:02:14,209 [salt.fileclient  :1219][INFO    ][5391] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2019-01-19 00:02:14,403 [salt.state       :300 ][INFO    ][5391] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2019-01-19 00:02:14,409 [salt.state       :1951][INFO    ][5391] Completed state [/etc/haproxy/haproxy.cfg] at time 00:02:14.409936 duration_in_ms=231.689
2019-01-19 00:02:14,410 [salt.state       :1780][INFO    ][5391] Running state [/etc/haproxy/ssl] at time 00:02:14.410309
2019-01-19 00:02:14,410 [salt.state       :1813][INFO    ][5391] Executing state file.directory for [/etc/haproxy/ssl]
2019-01-19 00:02:14,412 [salt.state       :300 ][INFO    ][5391] {'/etc/haproxy/ssl': 'New Dir'}
2019-01-19 00:02:14,412 [salt.state       :1951][INFO    ][5391] Completed state [/etc/haproxy/ssl] at time 00:02:14.412638 duration_in_ms=2.328
2019-01-19 00:02:14,412 [salt.state       :1780][INFO    ][5391] Running state [/etc/haproxy/errors/429.http11] at time 00:02:14.412919
2019-01-19 00:02:14,413 [salt.state       :1813][INFO    ][5391] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2019-01-19 00:02:14,437 [salt.fileclient  :1219][INFO    ][5391] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2019-01-19 00:02:14,447 [salt.state       :300 ][INFO    ][5391] File changed:
New file
2019-01-19 00:02:14,447 [salt.state       :1951][INFO    ][5391] Completed state [/etc/haproxy/errors/429.http11] at time 00:02:14.447938 duration_in_ms=35.018
2019-01-19 00:02:14,449 [salt.state       :1780][INFO    ][5391] Running state [haproxy_status_packages] at time 00:02:14.449160
2019-01-19 00:02:14,449 [salt.state       :1813][INFO    ][5391] Executing state pkg.installed for [haproxy_status_packages]
2019-01-19 00:02:15,107 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:02:15,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2019-01-19 00:02:15,237 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119000215224507
2019-01-19 00:02:15,255 [salt.minion      :1432][INFO    ][6212] Starting a new job with PID 6212
2019-01-19 00:02:15,271 [salt.minion      :1711][INFO    ][6212] Returning information for job: 20190119000215224507
2019-01-19 00:02:16,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:02:16,900 [salt.state       :300 ][INFO    ][5391] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2019-01-19 00:02:16,921 [salt.state       :915 ][INFO    ][5391] Loading fresh modules for state activity
2019-01-19 00:02:16,964 [salt.state       :1951][INFO    ][5391] Completed state [haproxy_status_packages] at time 00:02:16.964791 duration_in_ms=2515.63
2019-01-19 00:02:16,968 [salt.state       :1780][INFO    ][5391] Running state [/usr/bin/haproxy-status.sh] at time 00:02:16.968628
2019-01-19 00:02:16,968 [salt.state       :1813][INFO    ][5391] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2019-01-19 00:02:16,994 [salt.fileclient  :1219][INFO    ][5391] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2019-01-19 00:02:17,027 [salt.state       :300 ][INFO    ][5391] File changed:
New file
2019-01-19 00:02:17,027 [salt.state       :1951][INFO    ][5391] Completed state [/usr/bin/haproxy-status.sh] at time 00:02:17.027309 duration_in_ms=58.68
2019-01-19 00:02:17,030 [salt.state       :1780][INFO    ][5391] Running state [net.ipv4.ip_nonlocal_bind] at time 00:02:17.030516
2019-01-19 00:02:17,030 [salt.state       :1813][INFO    ][5391] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2019-01-19 00:02:17,033 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2019-01-19 00:02:17,047 [salt.state       :300 ][INFO    ][5391] {'net.ipv4.ip_nonlocal_bind': 1}
2019-01-19 00:02:17,048 [salt.state       :1951][INFO    ][5391] Completed state [net.ipv4.ip_nonlocal_bind] at time 00:02:17.048496 duration_in_ms=17.979
2019-01-19 00:02:17,552 [salt.state       :1780][INFO    ][5391] Running state [haproxy] at time 00:02:17.552537
2019-01-19 00:02:17,552 [salt.state       :1813][INFO    ][5391] Executing state service.running for [haproxy]
2019-01-19 00:02:17,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-01-19 00:02:17,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-01-19 00:02:17,589 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-01-19 00:02:17,608 [salt.state       :300 ][INFO    ][5391] The service haproxy is already running
2019-01-19 00:02:17,608 [salt.state       :1951][INFO    ][5391] Completed state [haproxy] at time 00:02:17.608791 duration_in_ms=56.249
2019-01-19 00:02:17,609 [salt.state       :1780][INFO    ][5391] Running state [haproxy] at time 00:02:17.609270
2019-01-19 00:02:17,609 [salt.state       :1813][INFO    ][5391] Executing state service.mod_watch for [haproxy]
2019-01-19 00:02:17,611 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-01-19 00:02:17,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5391] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2019-01-19 00:02:17,667 [salt.state       :300 ][INFO    ][5391] {'haproxy': True}
2019-01-19 00:02:17,668 [salt.state       :1951][INFO    ][5391] Completed state [haproxy] at time 00:02:17.668286 duration_in_ms=59.016
2019-01-19 00:02:17,670 [salt.minion      :1711][INFO    ][5391] Returning information for job: 20190119000205125138
2019-01-19 00:02:20,182 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command service.status with jid 20190119000220173850
2019-01-19 00:02:20,201 [salt.minion      :1432][INFO    ][6540] Starting a new job with PID 6540
2019-01-19 00:02:20,650 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6540] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-01-19 00:02:20,666 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6540] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-01-19 00:02:20,680 [salt.minion      :1711][INFO    ][6540] Returning information for job: 20190119000220173850
2019-01-19 00:02:21,836 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command service.restart with jid 20190119000221826800
2019-01-19 00:02:21,856 [salt.minion      :1432][INFO    ][6550] Starting a new job with PID 6550
2019-01-19 00:02:22,311 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6550] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2019-01-19 00:02:22,343 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6550] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2019-01-19 00:02:22,375 [salt.minion      :1711][INFO    ][6550] Returning information for job: 20190119000221826800
2019-01-19 00:28:44,021 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190119002844011669
2019-01-19 00:28:44,040 [salt.minion      :1432][INFO    ][6614] Starting a new job with PID 6614
2019-01-19 00:28:52,021 [salt.state       :915 ][INFO    ][6614] Loading fresh modules for state activity
2019-01-19 00:28:52,069 [salt.fileclient  :1219][INFO    ][6614] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2019-01-19 00:28:52,096 [salt.fileclient  :1219][INFO    ][6614] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2019-01-19 00:28:52,126 [salt.fileclient  :1219][INFO    ][6614] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2019-01-19 00:28:52,166 [salt.fileclient  :1219][INFO    ][6614] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2019-01-19 00:28:52,867 [salt.state       :1780][INFO    ][6614] Running state [redis-server] at time 00:28:52.867343
2019-01-19 00:28:52,867 [salt.state       :1813][INFO    ][6614] Executing state pkg.installed for [redis-server]
2019-01-19 00:28:52,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:28:53,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2019-01-19 00:28:53,282 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-19 00:28:54,113 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119002854097849
2019-01-19 00:28:54,130 [salt.minion      :1432][INFO    ][6925] Starting a new job with PID 6925
2019-01-19 00:28:54,143 [salt.minion      :1711][INFO    ][6925] Returning information for job: 20190119002854097849
2019-01-19 00:28:54,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:28:54,979 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2019-01-19 00:28:58,163 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:28:58,201 [salt.state       :300 ][INFO    ][6614] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2019-01-19 00:28:58,220 [salt.state       :915 ][INFO    ][6614] Loading fresh modules for state activity
2019-01-19 00:28:58,261 [salt.state       :1951][INFO    ][6614] Completed state [redis-server] at time 00:28:58.261113 duration_in_ms=5393.769
2019-01-19 00:28:58,265 [salt.state       :1780][INFO    ][6614] Running state [vm.overcommit_memory] at time 00:28:58.265035
2019-01-19 00:28:58,265 [salt.state       :1813][INFO    ][6614] Executing state sysctl.present for [vm.overcommit_memory]
2019-01-19 00:28:58,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2019-01-19 00:28:58,281 [salt.state       :300 ][INFO    ][6614] {'vm.overcommit_memory': 1}
2019-01-19 00:28:58,281 [salt.state       :1951][INFO    ][6614] Completed state [vm.overcommit_memory] at time 00:28:58.281472 duration_in_ms=16.435
2019-01-19 00:28:58,284 [salt.state       :1780][INFO    ][6614] Running state [/etc/redis/redis.conf] at time 00:28:58.284712
2019-01-19 00:28:58,285 [salt.state       :1813][INFO    ][6614] Executing state file.managed for [/etc/redis/redis.conf]
2019-01-19 00:28:58,327 [salt.fileclient  :1219][INFO    ][6614] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2019-01-19 00:28:58,408 [salt.state       :300 ][INFO    ][6614] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 192.168.10.33
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -284,6 +283,7 @@
 #    and resynchronize with them.
 #
 # replicaof <masterip> <masterport>
+replicaof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the replica to authenticate before
@@ -695,7 +695,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -725,9 +724,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1372,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2019-01-19 00:28:58,429 [salt.state       :1951][INFO    ][6614] Completed state [/etc/redis/redis.conf] at time 00:28:58.429066 duration_in_ms=144.353
2019-01-19 00:28:58,887 [salt.state       :1780][INFO    ][6614] Running state [redis-server] at time 00:28:58.887230
2019-01-19 00:28:58,888 [salt.state       :1813][INFO    ][6614] Executing state service.running for [redis-server]
2019-01-19 00:28:58,889 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2019-01-19 00:28:58,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-01-19 00:28:58,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-01-19 00:28:58,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2019-01-19 00:28:59,023 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-01-19 00:28:59,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-01-19 00:28:59,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-01-19 00:28:59,081 [salt.state       :300 ][INFO    ][6614] {'redis-server': True}
2019-01-19 00:28:59,082 [salt.state       :1951][INFO    ][6614] Completed state [redis-server] at time 00:28:59.082238 duration_in_ms=195.006
2019-01-19 00:28:59,084 [salt.state       :1780][INFO    ][6614] Running state [redis-sentinel] at time 00:28:59.084783
2019-01-19 00:28:59,085 [salt.state       :1813][INFO    ][6614] Executing state pkg.installed for [redis-sentinel]
2019-01-19 00:28:59,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:28:59,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2019-01-19 00:29:02,067 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:29:02,108 [salt.state       :300 ][INFO    ][6614] Made the following changes:
'redis-sentinel' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'

2019-01-19 00:29:02,125 [salt.state       :915 ][INFO    ][6614] Loading fresh modules for state activity
2019-01-19 00:29:02,159 [salt.state       :1951][INFO    ][6614] Completed state [redis-sentinel] at time 00:29:02.159415 duration_in_ms=3074.632
2019-01-19 00:29:02,607 [salt.state       :1780][INFO    ][6614] Running state [/etc/redis/sentinel.conf] at time 00:29:02.607819
2019-01-19 00:29:02,608 [salt.state       :1813][INFO    ][6614] Executing state file.managed for [/etc/redis/sentinel.conf]
2019-01-19 00:29:02,632 [salt.fileclient  :1219][INFO    ][6614] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/sentinel.conf'
2019-01-19 00:29:02,670 [salt.state       :300 ][INFO    ][6614] File changed:
--- 
+++ 
@@ -1,7 +1,3 @@
-# Example sentinel.conf
-
-# *** IMPORTANT ***
-#
 # By default Sentinel will not be reachable from interfaces different than
 # localhost, either use the 'bind' directive to bind to a list of network
 # interfaces, or disable protected mode with "protected-mode no" by
@@ -13,7 +9,7 @@
 # For example you may use one of the following:
 #
 # bind 127.0.0.1 192.168.1.1
-bind 127.0.0.1 ::1
+bind 192.168.10.33
 #
 # protected-mode no
 
@@ -82,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -111,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -119,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -144,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -168,7 +164,7 @@
 # NOTIFICATION SCRIPT
 #
 # sentinel notification-script <master-name> <script-path>
-# 
+#
 # Call the specified notification script for any sentinel event that is
 # generated in the WARNING level (for instance -sdown, -odown, and so forth).
 # This script should notify the system administrator via email, SMS, or any
@@ -192,14 +188,14 @@
 # When the master changed because of a failover a script can be called in
 # order to perform application-specific tasks to notify the clients that the
 # configuration has changed and the master is at a different address.
-# 
+#
 # The following arguments are passed to the script:
 #
 # <master-name> <role> <state> <from-ip> <from-port> <to-ip> <to-port>
 #
 # <state> is currently always "failover"
 # <role> is either "leader" or "observer"
-# 
+#
 # The arguments from-ip, from-port, to-ip, to-port are used to communicate
 # the old address of the master and the new address of the elected replica
 # (now a master).

2019-01-19 00:29:02,670 [salt.state       :1951][INFO    ][6614] Completed state [/etc/redis/sentinel.conf] at time 00:29:02.670629 duration_in_ms=62.81
2019-01-19 00:29:02,671 [salt.state       :1780][INFO    ][6614] Running state [redis-sentinel] at time 00:29:02.670971
2019-01-19 00:29:02,671 [salt.state       :1813][INFO    ][6614] Executing state service.running for [redis-sentinel]
2019-01-19 00:29:02,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2019-01-19 00:29:02,688 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-01-19 00:29:02,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-01-19 00:29:02,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-sentinel.service'] in directory '/root'
2019-01-19 00:29:02,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-01-19 00:29:02,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-01-19 00:29:02,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6614] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-01-19 00:29:02,841 [salt.state       :300 ][INFO    ][6614] {'redis-sentinel': True}
2019-01-19 00:29:02,842 [salt.state       :1951][INFO    ][6614] Completed state [redis-sentinel] at time 00:29:02.842144 duration_in_ms=171.171
2019-01-19 00:29:02,844 [salt.minion      :1711][INFO    ][6614] Returning information for job: 20190119002844011669
2019-01-19 00:29:05,207 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command test.ping with jid 20190119002905198736
2019-01-19 00:29:05,227 [salt.minion      :1432][INFO    ][8054] Starting a new job with PID 8054
2019-01-19 00:29:05,247 [salt.minion      :1711][INFO    ][8054] Returning information for job: 20190119002905198736
2019-01-19 00:30:14,427 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190119003014414356
2019-01-19 00:30:14,448 [salt.minion      :1432][INFO    ][8059] Starting a new job with PID 8059
2019-01-19 00:30:22,341 [salt.state       :915 ][INFO    ][8059] Loading fresh modules for state activity
2019-01-19 00:30:22,393 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2019-01-19 00:30:22,426 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2019-01-19 00:30:22,497 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2019-01-19 00:30:22,526 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2019-01-19 00:30:22,561 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2019-01-19 00:30:22,645 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2019-01-19 00:30:22,725 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2019-01-19 00:30:22,806 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2019-01-19 00:30:22,942 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2019-01-19 00:30:23,013 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2019-01-19 00:30:23,082 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2019-01-19 00:30:23,136 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2019-01-19 00:30:23,859 [salt.state       :1780][INFO    ][8059] Running state [apache2] at time 00:30:23.859038
2019-01-19 00:30:23,859 [salt.state       :1813][INFO    ][8059] Executing state pkg.installed for [apache2]
2019-01-19 00:30:23,860 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:30:24,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2019-01-19 00:30:24,264 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-19 00:30:24,504 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003024492103
2019-01-19 00:30:24,521 [salt.minion      :1432][INFO    ][8171] Starting a new job with PID 8171
2019-01-19 00:30:24,536 [salt.minion      :1711][INFO    ][8171] Returning information for job: 20190119003024492103
2019-01-19 00:30:25,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:30:25,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2019-01-19 00:30:32,364 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:30:32,403 [salt.state       :300 ][INFO    ][8059] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2019-01-19 00:30:32,428 [salt.state       :915 ][INFO    ][8059] Loading fresh modules for state activity
2019-01-19 00:30:32,468 [salt.state       :1951][INFO    ][8059] Completed state [apache2] at time 00:30:32.468701 duration_in_ms=8609.664
2019-01-19 00:30:32,474 [salt.state       :1780][INFO    ][8059] Running state [openssl] at time 00:30:32.474017
2019-01-19 00:30:32,474 [salt.state       :1813][INFO    ][8059] Executing state pkg.installed for [openssl]
2019-01-19 00:30:33,091 [salt.state       :300 ][INFO    ][8059] All specified packages are already installed
2019-01-19 00:30:33,091 [salt.state       :1951][INFO    ][8059] Completed state [openssl] at time 00:30:33.091396 duration_in_ms=617.377
2019-01-19 00:30:33,092 [salt.state       :1780][INFO    ][8059] Running state [a2enmod rewrite] at time 00:30:33.092603
2019-01-19 00:30:33,092 [salt.state       :1813][INFO    ][8059] Executing state cmd.run for [a2enmod rewrite]
2019-01-19 00:30:33,093 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command 'a2enmod rewrite' in directory '/root'
2019-01-19 00:30:33,138 [salt.state       :300 ][INFO    ][8059] {'pid': 9539, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-01-19 00:30:33,139 [salt.state       :1951][INFO    ][8059] Completed state [a2enmod rewrite] at time 00:30:33.139030 duration_in_ms=46.427
2019-01-19 00:30:33,139 [salt.state       :1780][INFO    ][8059] Running state [libapache2-mod-wsgi] at time 00:30:33.139717
2019-01-19 00:30:33,140 [salt.state       :1813][INFO    ][8059] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-01-19 00:30:33,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:30:33,194 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2019-01-19 00:30:34,635 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003034619162
2019-01-19 00:30:34,656 [salt.minion      :1432][INFO    ][9702] Starting a new job with PID 9702
2019-01-19 00:30:34,670 [salt.minion      :1711][INFO    ][9702] Returning information for job: 20190119003034619162
2019-01-19 00:30:37,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:30:37,444 [salt.state       :300 ][INFO    ][8059] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'

2019-01-19 00:30:37,468 [salt.state       :915 ][INFO    ][8059] Loading fresh modules for state activity
2019-01-19 00:30:37,506 [salt.state       :1951][INFO    ][8059] Completed state [libapache2-mod-wsgi] at time 00:30:37.506740 duration_in_ms=4367.022
2019-01-19 00:30:37,509 [salt.state       :1780][INFO    ][8059] Running state [a2enmod wsgi] at time 00:30:37.509584
2019-01-19 00:30:37,509 [salt.state       :1813][INFO    ][8059] Executing state cmd.run for [a2enmod wsgi]
2019-01-19 00:30:37,510 [salt.state       :300 ][INFO    ][8059] /etc/apache2/mods-enabled/wsgi.load exists
2019-01-19 00:30:37,510 [salt.state       :1951][INFO    ][8059] Completed state [a2enmod wsgi] at time 00:30:37.510429 duration_in_ms=0.845
2019-01-19 00:30:37,514 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:30:37.514227
2019-01-19 00:30:37,514 [salt.state       :1813][INFO    ][8059] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-01-19 00:30:37,547 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2019-01-19 00:30:37,602 [salt.state       :300 ][INFO    ][8059] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2019-01-19 00:30:37,602 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:30:37.602244 duration_in_ms=88.017
2019-01-19 00:30:37,602 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:30:37.602439
2019-01-19 00:30:37,602 [salt.state       :1813][INFO    ][8059] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-01-19 00:30:37,602 [salt.state       :300 ][INFO    ][8059] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-01-19 00:30:37,603 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:30:37.603043 duration_in_ms=0.603
2019-01-19 00:30:37,603 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:30:37.603221
2019-01-19 00:30:37,603 [salt.state       :1813][INFO    ][8059] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-01-19 00:30:37,603 [salt.state       :300 ][INFO    ][8059] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2019-01-19 00:30:37,603 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:30:37.603947 duration_in_ms=0.725
2019-01-19 00:30:37,605 [salt.state       :1780][INFO    ][8059] Running state [a2enmod mpm_prefork] at time 00:30:37.605107
2019-01-19 00:30:37,605 [salt.state       :1813][INFO    ][8059] Executing state cmd.run for [a2enmod mpm_prefork]
2019-01-19 00:30:37,607 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command 'a2enmod mpm_prefork' in directory '/root'
2019-01-19 00:30:37,657 [salt.state       :300 ][INFO    ][8059] {'pid': 9871, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-01-19 00:30:37,657 [salt.state       :1951][INFO    ][8059] Completed state [a2enmod mpm_prefork] at time 00:30:37.657334 duration_in_ms=52.227
2019-01-19 00:30:37,657 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:30:37.657719
2019-01-19 00:30:37,658 [salt.state       :1813][INFO    ][8059] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-01-19 00:30:37,658 [salt.state       :300 ][INFO    ][8059] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-01-19 00:30:37,658 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:30:37.658577 duration_in_ms=0.858
2019-01-19 00:30:37,658 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:30:37.658774
2019-01-19 00:30:37,658 [salt.state       :1813][INFO    ][8059] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-01-19 00:30:37,659 [salt.state       :300 ][INFO    ][8059] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2019-01-19 00:30:37,659 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:30:37.659432 duration_in_ms=0.657
2019-01-19 00:30:37,661 [salt.state       :1780][INFO    ][8059] Running state [apache_server_service_task] at time 00:30:37.661893
2019-01-19 00:30:37,662 [salt.state       :1813][INFO    ][8059] Executing state test.show_notification for [apache_server_service_task]
2019-01-19 00:30:37,662 [salt.state       :300 ][INFO    ][8059] Running apache.server.service
2019-01-19 00:30:37,662 [salt.state       :1951][INFO    ][8059] Completed state [apache_server_service_task] at time 00:30:37.662653 duration_in_ms=0.76
2019-01-19 00:30:37,663 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/ports.conf] at time 00:30:37.663223
2019-01-19 00:30:37,663 [salt.state       :1813][INFO    ][8059] Executing state file.managed for [/etc/apache2/ports.conf]
2019-01-19 00:30:37,687 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2019-01-19 00:30:37,738 [salt.state       :300 ][INFO    ][8059] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2019-01-19 00:30:37,739 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/ports.conf] at time 00:30:37.738989 duration_in_ms=75.766
2019-01-19 00:30:37,739 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/conf-available/security.conf] at time 00:30:37.739387
2019-01-19 00:30:37,739 [salt.state       :1813][INFO    ][8059] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-01-19 00:30:37,759 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2019-01-19 00:30:37,807 [salt.state       :300 ][INFO    ][8059] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2019-01-19 00:30:37,807 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/conf-available/security.conf] at time 00:30:37.807456 duration_in_ms=68.069
2019-01-19 00:30:38,257 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 00:30:38.257748
2019-01-19 00:30:38,258 [salt.state       :1813][INFO    ][8059] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-01-19 00:30:38,259 [salt.state       :300 ][INFO    ][8059] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2019-01-19 00:30:38,259 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 00:30:38.259334 duration_in_ms=1.586
2019-01-19 00:30:38,259 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:30:38.259945
2019-01-19 00:30:38,260 [salt.state       :1813][INFO    ][8059] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-01-19 00:30:38,278 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2019-01-19 00:30:38,315 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2019-01-19 00:30:38,383 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2019-01-19 00:30:38,414 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2019-01-19 00:30:38,497 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2019-01-19 00:30:38,521 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2019-01-19 00:30:38,545 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2019-01-19 00:30:38,557 [salt.state       :300 ][INFO    ][8059] File changed:
New file
2019-01-19 00:30:38,557 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:30:38.557951 duration_in_ms=298.005
2019-01-19 00:30:38,558 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:30:38.558609
2019-01-19 00:30:38,559 [salt.state       :1813][INFO    ][8059] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-01-19 00:30:38,788 [salt.state       :300 ][INFO    ][8059] File changed:
New file
2019-01-19 00:30:38,789 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:30:38.789548 duration_in_ms=230.938
2019-01-19 00:30:38,793 [salt.state       :1780][INFO    ][8059] Running state [apache2] at time 00:30:38.793133
2019-01-19 00:30:38,793 [salt.state       :1813][INFO    ][8059] Executing state service.running for [apache2]
2019-01-19 00:30:38,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-01-19 00:30:38,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:30:38,830 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:30:38,845 [salt.state       :300 ][INFO    ][8059] The service apache2 is already running
2019-01-19 00:30:38,845 [salt.state       :1951][INFO    ][8059] Completed state [apache2] at time 00:30:38.845714 duration_in_ms=52.579
2019-01-19 00:30:38,846 [salt.state       :1780][INFO    ][8059] Running state [apache2] at time 00:30:38.846359
2019-01-19 00:30:38,847 [salt.state       :1813][INFO    ][8059] Executing state service.mod_watch for [apache2]
2019-01-19 00:30:38,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:30:38,862 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2019-01-19 00:30:39,042 [salt.state       :300 ][INFO    ][8059] {'apache2': True}
2019-01-19 00:30:39,043 [salt.state       :1951][INFO    ][8059] Completed state [apache2] at time 00:30:39.043291 duration_in_ms=196.919
2019-01-19 00:30:39,045 [salt.state       :1780][INFO    ][8059] Running state [/etc/apache2/conf-enabled/security.conf] at time 00:30:39.044272
2019-01-19 00:30:39,046 [salt.state       :1813][INFO    ][8059] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-01-19 00:30:39,051 [salt.state       :300 ][INFO    ][8059] {'new': '/etc/apache2/conf-enabled/security.conf'}
2019-01-19 00:30:39,051 [salt.state       :1951][INFO    ][8059] Completed state [/etc/apache2/conf-enabled/security.conf] at time 00:30:39.051803 duration_in_ms=7.531
2019-01-19 00:30:39,053 [salt.state       :1780][INFO    ][8059] Running state [gnocchi-common] at time 00:30:39.053867
2019-01-19 00:30:39,054 [salt.state       :1813][INFO    ][8059] Executing state pkg.installed for [gnocchi-common]
2019-01-19 00:30:39,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:30:39,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2019-01-19 00:30:44,768 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003044758050
2019-01-19 00:30:44,779 [salt.minion      :1432][INFO    ][10648] Starting a new job with PID 10648
2019-01-19 00:30:44,794 [salt.minion      :1711][INFO    ][10648] Returning information for job: 20190119003044758050
2019-01-19 00:30:54,879 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003054866271
2019-01-19 00:30:54,894 [salt.minion      :1432][INFO    ][12225] Starting a new job with PID 12225
2019-01-19 00:30:54,912 [salt.minion      :1711][INFO    ][12225] Returning information for job: 20190119003054866271
2019-01-19 00:31:04,894 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:31:04,943 [salt.state       :300 ][INFO    ][8059] Made the following changes:
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-os-service-types' changed from 'absent' to '1.3.0-1~u16.04+mcp'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-editor' changed from 'absent' to '0.4-2'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~u16.04+mcp'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.40.0-1~u16.04+mcp'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'liblapack.so.3' changed from 'absent' to '1'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.21.0-1~u16.04+mcp'
'python-oslo.cache' changed from 'absent' to '1.30.2-1~u16.04+mcp3'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python-lxml' changed from 'absent' to '3.5.0-1ubuntu0.1'
'python-oslo.config' changed from 'absent' to '1:6.4.0-1~u16.04+mcp'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'python2.7-testscenarios' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.27.0-1~u16.04+mcp'
'python-oslo.utils' changed from 'absent' to '3.36.4-1~u16.04+mcp'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.21.0-1~u16.04+mcp'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python2.7-simplejson' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.39.0-1~u16.04+mcp'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-pbr' changed from 'absent' to '4.2.0-4~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.3.0-1~u16.04+mcp'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp4'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-keystoneclient' changed from 'absent' to '1:3.17.0-1~u16.04+mcp4'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystoneauth1' changed from 'absent' to '3.10.0-1~u16.04+mcp10'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp8'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2019-01-19 00:31:04,961 [salt.state       :915 ][INFO    ][8059] Loading fresh modules for state activity
2019-01-19 00:31:04,998 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003104987586
2019-01-19 00:31:05,000 [salt.state       :1951][INFO    ][8059] Completed state [gnocchi-common] at time 00:31:05.000792 duration_in_ms=25946.924
2019-01-19 00:31:05,003 [salt.state       :1780][INFO    ][8059] Running state [gnocchi_ssl_mysql] at time 00:31:05.003307
2019-01-19 00:31:05,003 [salt.state       :1813][INFO    ][8059] Executing state test.show_notification for [gnocchi_ssl_mysql]
2019-01-19 00:31:05,003 [salt.state       :300 ][INFO    ][8059] Running gnocchi._ssl.mysql
2019-01-19 00:31:05,004 [salt.state       :1951][INFO    ][8059] Completed state [gnocchi_ssl_mysql] at time 00:31:05.004031 duration_in_ms=0.725
2019-01-19 00:31:05,006 [salt.state       :1780][INFO    ][8059] Running state [/etc/gnocchi/gnocchi.conf] at time 00:31:05.006046
2019-01-19 00:31:05,006 [salt.state       :1813][INFO    ][8059] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2019-01-19 00:31:05,021 [salt.minion      :1432][INFO    ][12898] Starting a new job with PID 12898
2019-01-19 00:31:05,035 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2019-01-19 00:31:05,047 [salt.minion      :1711][INFO    ][12898] Returning information for job: 20190119003104987586
2019-01-19 00:31:05,135 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2019-01-19 00:31:05,150 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2019-01-19 00:31:05,186 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2019-01-19 00:31:05,222 [salt.fileclient  :1219][INFO    ][8059] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2019-01-19 00:31:05,229 [salt.state       :300 ][INFO    ][8059] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.33:6379

2019-01-19 00:31:05,238 [salt.state       :1951][INFO    ][8059] Completed state [/etc/gnocchi/gnocchi.conf] at time 00:31:05.237961 duration_in_ms=231.914
2019-01-19 00:31:05,249 [salt.state       :1780][INFO    ][8059] Running state [gnocchi-api] at time 00:31:05.249534
2019-01-19 00:31:05,249 [salt.state       :1813][INFO    ][8059] Executing state pkg.installed for [gnocchi-api]
2019-01-19 00:31:06,540 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:31:06,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2019-01-19 00:31:12,996 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:31:13,045 [salt.state       :300 ][INFO    ][8059] Made the following changes:
'python-novaclient' changed from 'absent' to '2:11.0.0-2~u16.04+mcp13'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.11.1-2~u16.04+mcp'
'python-openstacksdk' changed from 'absent' to '0.17.2-2~u16.04+mcp'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'python-glanceclient' changed from 'absent' to '1:2.13.0-3~u16.04+mcp3'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.16.1-3~u16.04+mcp8'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-cinderclient' changed from 'absent' to '1:4.0.1-1~u16.04+mcp4'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.9.1-1~u16.04+mcp4'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'

2019-01-19 00:31:13,070 [salt.state       :915 ][INFO    ][8059] Loading fresh modules for state activity
2019-01-19 00:31:13,112 [salt.state       :1951][INFO    ][8059] Completed state [gnocchi-api] at time 00:31:13.112768 duration_in_ms=7863.232
2019-01-19 00:31:13,118 [salt.state       :1780][INFO    ][8059] Running state [gnocchi-metricd] at time 00:31:13.118243
2019-01-19 00:31:13,118 [salt.state       :1813][INFO    ][8059] Executing state pkg.installed for [gnocchi-metricd]
2019-01-19 00:31:14,185 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:31:14,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2019-01-19 00:31:15,151 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003115137776
2019-01-19 00:31:15,168 [salt.minion      :1432][INFO    ][13881] Starting a new job with PID 13881
2019-01-19 00:31:15,183 [salt.minion      :1711][INFO    ][13881] Returning information for job: 20190119003115137776
2019-01-19 00:31:16,554 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:31:16,605 [salt.state       :300 ][INFO    ][8059] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2019-01-19 00:31:16,633 [salt.state       :915 ][INFO    ][8059] Loading fresh modules for state activity
2019-01-19 00:31:16,820 [salt.state       :1951][INFO    ][8059] Completed state [gnocchi-metricd] at time 00:31:16.820783 duration_in_ms=3702.539
2019-01-19 00:31:16,827 [salt.state       :1780][INFO    ][8059] Running state [python-memcache] at time 00:31:16.827217
2019-01-19 00:31:16,827 [salt.state       :1813][INFO    ][8059] Executing state pkg.installed for [python-memcache]
2019-01-19 00:31:17,529 [salt.state       :300 ][INFO    ][8059] All specified packages are already installed
2019-01-19 00:31:17,529 [salt.state       :1951][INFO    ][8059] Completed state [python-memcache] at time 00:31:17.529476 duration_in_ms=702.257
2019-01-19 00:31:17,531 [salt.state       :1780][INFO    ][8059] Running state [gnocchi-upgrade] at time 00:31:17.530972
2019-01-19 00:31:17,531 [salt.state       :1813][INFO    ][8059] Executing state cmd.run for [gnocchi-upgrade]
2019-01-19 00:31:17,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2019-01-19 00:31:19,247 [salt.state       :300 ][INFO    ][8059] {'pid': 14066, 'retcode': 0, 'stderr': '2019-01-19 00:31:18,729 [14074] INFO     gnocchi.service: Gnocchi version 4.2.4\n2019-01-19 00:31:19,081 [14074] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2019-01-19 00:31:19,182 [14074] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.33,port=6379,db=0>>>\n2019-01-19 00:31:19,183 [14074] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2019-01-19 00:31:19,249 [salt.state       :1951][INFO    ][8059] Completed state [gnocchi-upgrade] at time 00:31:19.249731 duration_in_ms=1718.755
2019-01-19 00:31:19,253 [salt.state       :1780][INFO    ][8059] Running state [wsgi_gnocchi] at time 00:31:19.253404
2019-01-19 00:31:19,253 [salt.state       :1813][INFO    ][8059] Executing state apache_site.enabled for [wsgi_gnocchi]
2019-01-19 00:31:19,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2019-01-19 00:31:19,310 [salt.state       :300 ][INFO    ][8059] {'new': 'wsgi_gnocchi', 'old': None}
2019-01-19 00:31:19,311 [salt.state       :1951][INFO    ][8059] Completed state [wsgi_gnocchi] at time 00:31:19.311831 duration_in_ms=58.425
2019-01-19 00:31:19,315 [salt.state       :1780][INFO    ][8059] Running state [apache2] at time 00:31:19.315331
2019-01-19 00:31:19,315 [salt.state       :1813][INFO    ][8059] Executing state service.running for [apache2]
2019-01-19 00:31:19,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:31:19,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:31:19,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2019-01-19 00:31:20,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:31:20,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:31:20,588 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:31:20,609 [salt.state       :300 ][INFO    ][8059] {'apache2': True}
2019-01-19 00:31:20,609 [salt.state       :1951][INFO    ][8059] Completed state [apache2] at time 00:31:20.609806 duration_in_ms=1294.473
2019-01-19 00:31:20,610 [salt.state       :1780][INFO    ][8059] Running state [gnocchi-metricd] at time 00:31:20.610871
2019-01-19 00:31:20,611 [salt.state       :1813][INFO    ][8059] Executing state service.running for [gnocchi-metricd]
2019-01-19 00:31:20,611 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2019-01-19 00:31:20,629 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:20,657 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:20,682 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:20,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:20,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:20,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:20,817 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:21,402 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8059] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-19 00:31:21,425 [salt.state       :300 ][INFO    ][8059] {'gnocchi-metricd': True}
2019-01-19 00:31:21,426 [salt.state       :1951][INFO    ][8059] Completed state [gnocchi-metricd] at time 00:31:21.426251 duration_in_ms=815.377
2019-01-19 00:31:21,433 [salt.minion      :1711][INFO    ][8059] Returning information for job: 20190119003014414356
2019-01-19 00:32:36,229 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command test.ping with jid 20190119003236220297
2019-01-19 00:32:36,251 [salt.minion      :1432][INFO    ][14369] Starting a new job with PID 14369
2019-01-19 00:32:36,279 [salt.minion      :1711][INFO    ][14369] Returning information for job: 20190119003236220297
2019-01-19 00:33:02,706 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190119003302690464
2019-01-19 00:33:02,721 [salt.minion      :1432][INFO    ][14374] Starting a new job with PID 14374
2019-01-19 00:33:10,703 [salt.state       :915 ][INFO    ][14374] Loading fresh modules for state activity
2019-01-19 00:33:10,760 [salt.fileclient  :1219][INFO    ][14374] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2019-01-19 00:33:10,790 [salt.fileclient  :1219][INFO    ][14374] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2019-01-19 00:33:11,416 [salt.fileclient  :1219][INFO    ][14374] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2019-01-19 00:33:11,486 [salt.fileclient  :1219][INFO    ][14374] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2019-01-19 00:33:12,760 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003312748213
2019-01-19 00:33:12,779 [salt.minion      :1432][INFO    ][14409] Starting a new job with PID 14409
2019-01-19 00:33:12,791 [salt.minion      :1711][INFO    ][14409] Returning information for job: 20190119003312748213
2019-01-19 00:33:12,914 [salt.state       :1780][INFO    ][14374] Running state [apache2] at time 00:33:12.914069
2019-01-19 00:33:12,914 [salt.state       :1813][INFO    ][14374] Executing state pkg.installed for [apache2]
2019-01-19 00:33:12,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:33:13,239 [salt.state       :300 ][INFO    ][14374] All specified packages are already installed
2019-01-19 00:33:13,240 [salt.state       :1951][INFO    ][14374] Completed state [apache2] at time 00:33:13.240108 duration_in_ms=326.036
2019-01-19 00:33:13,240 [salt.state       :1780][INFO    ][14374] Running state [openssl] at time 00:33:13.240698
2019-01-19 00:33:13,241 [salt.state       :1813][INFO    ][14374] Executing state pkg.installed for [openssl]
2019-01-19 00:33:13,249 [salt.state       :300 ][INFO    ][14374] All specified packages are already installed
2019-01-19 00:33:13,250 [salt.state       :1951][INFO    ][14374] Completed state [openssl] at time 00:33:13.250050 duration_in_ms=9.351
2019-01-19 00:33:13,250 [salt.state       :1780][INFO    ][14374] Running state [a2enmod rewrite] at time 00:33:13.250871
2019-01-19 00:33:13,251 [salt.state       :1813][INFO    ][14374] Executing state cmd.run for [a2enmod rewrite]
2019-01-19 00:33:13,251 [salt.state       :300 ][INFO    ][14374] /etc/apache2/mods-enabled/rewrite.load exists
2019-01-19 00:33:13,252 [salt.state       :1951][INFO    ][14374] Completed state [a2enmod rewrite] at time 00:33:13.252265 duration_in_ms=1.395
2019-01-19 00:33:13,252 [salt.state       :1780][INFO    ][14374] Running state [libapache2-mod-wsgi] at time 00:33:13.252856
2019-01-19 00:33:13,253 [salt.state       :1813][INFO    ][14374] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-01-19 00:33:13,260 [salt.state       :300 ][INFO    ][14374] All specified packages are already installed
2019-01-19 00:33:13,261 [salt.state       :1951][INFO    ][14374] Completed state [libapache2-mod-wsgi] at time 00:33:13.261277 duration_in_ms=8.421
2019-01-19 00:33:13,261 [salt.state       :1780][INFO    ][14374] Running state [a2enmod wsgi] at time 00:33:13.261855
2019-01-19 00:33:13,262 [salt.state       :1813][INFO    ][14374] Executing state cmd.run for [a2enmod wsgi]
2019-01-19 00:33:13,262 [salt.state       :300 ][INFO    ][14374] /etc/apache2/mods-enabled/wsgi.load exists
2019-01-19 00:33:13,263 [salt.state       :1951][INFO    ][14374] Completed state [a2enmod wsgi] at time 00:33:13.263050 duration_in_ms=1.194
2019-01-19 00:33:13,267 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:33:13.267889
2019-01-19 00:33:13,268 [salt.state       :1813][INFO    ][14374] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-01-19 00:33:13,495 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-01-19 00:33:13,495 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:33:13.495593 duration_in_ms=227.704
2019-01-19 00:33:13,496 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:33:13.495998
2019-01-19 00:33:13,498 [salt.state       :1813][INFO    ][14374] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-01-19 00:33:13,498 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-01-19 00:33:13,499 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:33:13.499269 duration_in_ms=3.271
2019-01-19 00:33:13,499 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:33:13.499622
2019-01-19 00:33:13,499 [salt.state       :1813][INFO    ][14374] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-01-19 00:33:13,500 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-01-19 00:33:13,501 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:33:13.501095 duration_in_ms=1.472
2019-01-19 00:33:13,501 [salt.state       :1780][INFO    ][14374] Running state [a2enmod mpm_prefork] at time 00:33:13.501897
2019-01-19 00:33:13,502 [salt.state       :1813][INFO    ][14374] Executing state cmd.run for [a2enmod mpm_prefork]
2019-01-19 00:33:13,502 [salt.state       :300 ][INFO    ][14374] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-01-19 00:33:13,503 [salt.state       :1951][INFO    ][14374] Completed state [a2enmod mpm_prefork] at time 00:33:13.503031 duration_in_ms=1.133
2019-01-19 00:33:13,503 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:33:13.503426
2019-01-19 00:33:13,503 [salt.state       :1813][INFO    ][14374] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-01-19 00:33:13,504 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-01-19 00:33:13,504 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:33:13.504922 duration_in_ms=1.495
2019-01-19 00:33:13,505 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:33:13.505274
2019-01-19 00:33:13,505 [salt.state       :1813][INFO    ][14374] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-01-19 00:33:13,506 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-01-19 00:33:13,506 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:33:13.506346 duration_in_ms=1.071
2019-01-19 00:33:13,507 [salt.state       :1780][INFO    ][14374] Running state [apache_server_service_task] at time 00:33:13.507222
2019-01-19 00:33:13,507 [salt.state       :1813][INFO    ][14374] Executing state test.show_notification for [apache_server_service_task]
2019-01-19 00:33:13,507 [salt.state       :300 ][INFO    ][14374] Running apache.server.service
2019-01-19 00:33:13,510 [salt.state       :1951][INFO    ][14374] Completed state [apache_server_service_task] at time 00:33:13.510863 duration_in_ms=3.64
2019-01-19 00:33:13,511 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/ports.conf] at time 00:33:13.511431
2019-01-19 00:33:13,511 [salt.state       :1813][INFO    ][14374] Executing state file.managed for [/etc/apache2/ports.conf]
2019-01-19 00:33:13,576 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/ports.conf is in the correct state
2019-01-19 00:33:13,577 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/ports.conf] at time 00:33:13.577002 duration_in_ms=65.57
2019-01-19 00:33:13,577 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/conf-available/security.conf] at time 00:33:13.577567
2019-01-19 00:33:13,577 [salt.state       :1813][INFO    ][14374] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-01-19 00:33:13,646 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/conf-available/security.conf is in the correct state
2019-01-19 00:33:13,646 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/conf-available/security.conf] at time 00:33:13.646835 duration_in_ms=69.268
2019-01-19 00:33:13,652 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 00:33:13.652889
2019-01-19 00:33:13,653 [salt.state       :1813][INFO    ][14374] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-01-19 00:33:13,653 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-01-19 00:33:13,653 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 00:33:13.653578 duration_in_ms=0.69
2019-01-19 00:33:13,653 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:33:13.653946
2019-01-19 00:33:13,654 [salt.state       :1813][INFO    ][14374] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-01-19 00:33:13,884 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-01-19 00:33:13,884 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:33:13.884769 duration_in_ms=230.823
2019-01-19 00:33:13,885 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:33:13.885198
2019-01-19 00:33:13,885 [salt.state       :1813][INFO    ][14374] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-01-19 00:33:14,120 [salt.state       :300 ][INFO    ][14374] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-01-19 00:33:14,121 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:33:14.121171 duration_in_ms=235.973
2019-01-19 00:33:14,122 [salt.state       :1780][INFO    ][14374] Running state [apache2] at time 00:33:14.122888
2019-01-19 00:33:14,123 [salt.state       :1813][INFO    ][14374] Executing state service.running for [apache2]
2019-01-19 00:33:14,124 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-01-19 00:33:14,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:33:14,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:33:14,200 [salt.state       :300 ][INFO    ][14374] The service apache2 is already running
2019-01-19 00:33:14,201 [salt.state       :1951][INFO    ][14374] Completed state [apache2] at time 00:33:14.201559 duration_in_ms=78.664
2019-01-19 00:33:14,204 [salt.state       :1780][INFO    ][14374] Running state [/etc/apache2/conf-enabled/security.conf] at time 00:33:14.204052
2019-01-19 00:33:14,205 [salt.state       :1813][INFO    ][14374] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-01-19 00:33:14,207 [salt.state       :300 ][INFO    ][14374] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-01-19 00:33:14,207 [salt.state       :1951][INFO    ][14374] Completed state [/etc/apache2/conf-enabled/security.conf] at time 00:33:14.207766 duration_in_ms=3.716
2019-01-19 00:33:14,208 [salt.state       :1780][INFO    ][14374] Running state [panko-api] at time 00:33:14.208852
2019-01-19 00:33:14,209 [salt.state       :1813][INFO    ][14374] Executing state pkg.installed for [panko-api]
2019-01-19 00:33:14,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2019-01-19 00:33:14,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-19 00:33:16,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:33:16,107 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2019-01-19 00:33:21,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:33:21,284 [salt.state       :300 ][INFO    ][14374] Made the following changes:
'python3-dateutil' changed from 'absent' to '2.6.1-1~u16.04+mcp1'
'python-pankoclient' changed from 'absent' to '0.5.0-2~u16.04+mcp5'
'python3-editor' changed from 'absent' to '0.4-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'python-panko' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'libmatheval1' changed from 'absent' to '1.1.11+dfsg-2'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'panko-common' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python3-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'uwsgi-core' changed from 'absent' to '2.0.12-5ubuntu3.2'
'panko-api' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-oslo.reports' changed from 'absent' to '1.26.0-2~u16.04+mcp'
'python3-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python3-mako' changed from 'absent' to '1.0.3+ds1-1ubuntu1'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'uwsgi-plugin-python' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libjansson4' changed from 'absent' to '2.7-3ubuntu0.1'
'alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'q-text-as-data' changed from 'absent' to '1'

2019-01-19 00:33:21,316 [salt.state       :915 ][INFO    ][14374] Loading fresh modules for state activity
2019-01-19 00:33:21,350 [salt.state       :1951][INFO    ][14374] Completed state [panko-api] at time 00:33:21.350475 duration_in_ms=7141.622
2019-01-19 00:33:21,353 [salt.state       :1780][INFO    ][14374] Running state [panko_ssl_mysql] at time 00:33:21.353204
2019-01-19 00:33:21,353 [salt.state       :1813][INFO    ][14374] Executing state test.show_notification for [panko_ssl_mysql]
2019-01-19 00:33:21,353 [salt.state       :300 ][INFO    ][14374] Running panko._ssl.mysql
2019-01-19 00:33:21,353 [salt.state       :1951][INFO    ][14374] Completed state [panko_ssl_mysql] at time 00:33:21.353848 duration_in_ms=0.644
2019-01-19 00:33:21,356 [salt.state       :1780][INFO    ][14374] Running state [/etc/panko/panko.conf] at time 00:33:21.356885
2019-01-19 00:33:21,357 [salt.state       :1813][INFO    ][14374] Executing state file.managed for [/etc/panko/panko.conf]
2019-01-19 00:33:21,386 [salt.fileclient  :1219][INFO    ][14374] Fetching file from saltenv 'base', ** done ** 'panko/files/rocky/panko.conf.Debian'
2019-01-19 00:33:21,447 [salt.fileclient  :1219][INFO    ][14374] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2019-01-19 00:33:21,472 [salt.fileclient  :1219][INFO    ][14374] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2019-01-19 00:33:21,561 [salt.state       :300 ][INFO    ][14374] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,73 +159,77 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -248,50 +239,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -306,6 +311,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -321,6 +327,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -358,6 +365,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -371,36 +379,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -478,68 +456,115 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2019-01-19 00:33:21,562 [salt.state       :1951][INFO    ][14374] Completed state [/etc/panko/panko.conf] at time 00:33:21.561995 duration_in_ms=205.11
2019-01-19 00:33:21,562 [salt.state       :1780][INFO    ][14374] Running state [panko-dbsync] at time 00:33:21.562413
2019-01-19 00:33:21,562 [salt.state       :1813][INFO    ][14374] Executing state cmd.run for [panko-dbsync]
2019-01-19 00:33:21,565 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command '/bin/false' in directory '/root'
2019-01-19 00:33:21,586 [salt.state       :300 ][INFO    ][14374] onlyif execution failed
2019-01-19 00:33:21,586 [salt.state       :1951][INFO    ][14374] Completed state [panko-dbsync] at time 00:33:21.586569 duration_in_ms=24.154
2019-01-19 00:33:21,595 [salt.state       :1780][INFO    ][14374] Running state [wsgi_panko] at time 00:33:21.595607
2019-01-19 00:33:21,595 [salt.state       :1813][INFO    ][14374] Executing state apache_site.enabled for [wsgi_panko]
2019-01-19 00:33:21,597 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2019-01-19 00:33:21,689 [salt.state       :300 ][INFO    ][14374] {'new': 'wsgi_panko', 'old': None}
2019-01-19 00:33:21,689 [salt.state       :1951][INFO    ][14374] Completed state [wsgi_panko] at time 00:33:21.689716 duration_in_ms=94.106
2019-01-19 00:33:22,205 [salt.state       :1780][INFO    ][14374] Running state [apache2] at time 00:33:22.205881
2019-01-19 00:33:22,206 [salt.state       :1813][INFO    ][14374] Executing state service.running for [apache2]
2019-01-19 00:33:22,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:33:22,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:33:22,242 [salt.state       :300 ][INFO    ][14374] The service apache2 is already running
2019-01-19 00:33:22,243 [salt.state       :1951][INFO    ][14374] Completed state [apache2] at time 00:33:22.243526 duration_in_ms=37.64
2019-01-19 00:33:22,245 [salt.state       :1780][INFO    ][14374] Running state [apache2] at time 00:33:22.244184
2019-01-19 00:33:22,245 [salt.state       :1813][INFO    ][14374] Executing state service.mod_watch for [apache2]
2019-01-19 00:33:22,246 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:33:22,266 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14374] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-01-19 00:33:22,879 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003322867210
2019-01-19 00:33:22,897 [salt.minion      :1432][INFO    ][15399] Starting a new job with PID 15399
2019-01-19 00:33:22,914 [salt.minion      :1711][INFO    ][15399] Returning information for job: 20190119003322867210
2019-01-19 00:33:24,564 [salt.state       :300 ][INFO    ][14374] {'apache2': True}
2019-01-19 00:33:24,565 [salt.state       :1951][INFO    ][14374] Completed state [apache2] at time 00:33:24.565048 duration_in_ms=2320.863
2019-01-19 00:33:24,567 [salt.minion      :1711][INFO    ][14374] Returning information for job: 20190119003302690464
2019-01-19 00:33:42,071 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command test.ping with jid 20190119003342060484
2019-01-19 00:33:42,091 [salt.minion      :1432][INFO    ][15503] Starting a new job with PID 15503
2019-01-19 00:33:42,110 [salt.minion      :1711][INFO    ][15503] Returning information for job: 20190119003342060484
2019-01-19 00:35:10,904 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190119003510891607
2019-01-19 00:35:10,923 [salt.minion      :1432][INFO    ][15509] Starting a new job with PID 15509
2019-01-19 00:35:18,886 [salt.state       :915 ][INFO    ][15509] Loading fresh modules for state activity
2019-01-19 00:35:18,946 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2019-01-19 00:35:18,972 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2019-01-19 00:35:19,122 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2019-01-19 00:35:19,173 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2019-01-19 00:35:19,230 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2019-01-19 00:35:20,936 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003520925917
2019-01-19 00:35:20,954 [salt.minion      :1432][INFO    ][15546] Starting a new job with PID 15546
2019-01-19 00:35:20,968 [salt.minion      :1711][INFO    ][15546] Returning information for job: 20190119003520925917
2019-01-19 00:35:21,181 [salt.state       :1780][INFO    ][15509] Running state [aodh-api] at time 00:35:21.181625
2019-01-19 00:35:21,182 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [aodh-api]
2019-01-19 00:35:21,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:35:21,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2019-01-19 00:35:21,616 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-19 00:35:23,398 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:35:23,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2019-01-19 00:35:31,064 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003531049652
2019-01-19 00:35:31,081 [salt.minion      :1432][INFO    ][16371] Starting a new job with PID 16371
2019-01-19 00:35:31,096 [salt.minion      :1711][INFO    ][16371] Returning information for job: 20190119003531049652
2019-01-19 00:35:38,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:35:38,069 [salt.state       :300 ][INFO    ][15509] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'build-essential' changed from 'absent' to '12.1ubuntu2'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'aodh-common' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'make:any' changed from 'absent' to '1'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'python2.7-greenlet' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-aodh' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-141.167'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-oslo.messaging' changed from 'absent' to '8.1.0-1~u16.04+mcp1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'c++-compiler' changed from 'absent' to '1'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'libc-dev' changed from 'absent' to '1'
'python-oslo.service' changed from 'absent' to '1.31.7-1~u16.04+mcp4'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'linux-kernel-headers' changed from 'absent' to '1'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2019-01-19 00:35:38,102 [salt.state       :915 ][INFO    ][15509] Loading fresh modules for state activity
2019-01-19 00:35:38,364 [salt.state       :1951][INFO    ][15509] Completed state [aodh-api] at time 00:35:38.364291 duration_in_ms=17182.666
2019-01-19 00:35:38,375 [salt.state       :1780][INFO    ][15509] Running state [aodh-evaluator] at time 00:35:38.375192
2019-01-19 00:35:38,375 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [aodh-evaluator]
2019-01-19 00:35:39,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:35:39,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2019-01-19 00:35:41,191 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003541172677
2019-01-19 00:35:41,204 [salt.minion      :1432][INFO    ][21531] Starting a new job with PID 21531
2019-01-19 00:35:41,237 [salt.minion      :1711][INFO    ][21531] Returning information for job: 20190119003541172677
2019-01-19 00:35:43,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:35:43,574 [salt.state       :300 ][INFO    ][15509] Made the following changes:
'aodh-evaluator' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-01-19 00:35:43,610 [salt.state       :915 ][INFO    ][15509] Loading fresh modules for state activity
2019-01-19 00:35:43,688 [salt.state       :1951][INFO    ][15509] Completed state [aodh-evaluator] at time 00:35:43.688316 duration_in_ms=5313.123
2019-01-19 00:35:43,696 [salt.state       :1780][INFO    ][15509] Running state [aodh-notifier] at time 00:35:43.695988
2019-01-19 00:35:43,712 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [aodh-notifier]
2019-01-19 00:35:45,164 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:35:45,209 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2019-01-19 00:35:47,917 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:35:47,961 [salt.state       :300 ][INFO    ][15509] Made the following changes:
'aodh-notifier' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-01-19 00:35:47,988 [salt.state       :915 ][INFO    ][15509] Loading fresh modules for state activity
2019-01-19 00:35:48,022 [salt.state       :1951][INFO    ][15509] Completed state [aodh-notifier] at time 00:35:48.022353 duration_in_ms=4326.364
2019-01-19 00:35:48,028 [salt.state       :1780][INFO    ][15509] Running state [aodh-listener] at time 00:35:48.028003
2019-01-19 00:35:48,028 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [aodh-listener]
2019-01-19 00:35:48,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:35:48,907 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2019-01-19 00:35:51,351 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003551339533
2019-01-19 00:35:51,373 [salt.minion      :1432][INFO    ][22308] Starting a new job with PID 22308
2019-01-19 00:35:51,412 [salt.minion      :1711][INFO    ][22308] Returning information for job: 20190119003551339533
2019-01-19 00:35:51,574 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:35:51,616 [salt.state       :300 ][INFO    ][15509] Made the following changes:
'aodh-listener' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-01-19 00:35:51,642 [salt.state       :915 ][INFO    ][15509] Loading fresh modules for state activity
2019-01-19 00:35:51,678 [salt.state       :1951][INFO    ][15509] Completed state [aodh-listener] at time 00:35:51.678833 duration_in_ms=3650.829
2019-01-19 00:35:51,685 [salt.state       :1780][INFO    ][15509] Running state [python-aodhclient] at time 00:35:51.685224
2019-01-19 00:35:51,685 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [python-aodhclient]
2019-01-19 00:35:52,660 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:35:52,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2019-01-19 00:35:54,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:35:54,383 [salt.state       :300 ][INFO    ][15509] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp3'

2019-01-19 00:35:54,409 [salt.state       :915 ][INFO    ][15509] Loading fresh modules for state activity
2019-01-19 00:35:54,448 [salt.state       :1951][INFO    ][15509] Completed state [python-aodhclient] at time 00:35:54.448798 duration_in_ms=2763.573
2019-01-19 00:35:54,455 [salt.state       :1780][INFO    ][15509] Running state [aodh_ssl_mysql] at time 00:35:54.455150
2019-01-19 00:35:54,455 [salt.state       :1813][INFO    ][15509] Executing state test.show_notification for [aodh_ssl_mysql]
2019-01-19 00:35:54,456 [salt.state       :300 ][INFO    ][15509] Running aodh._ssl.mysql
2019-01-19 00:35:54,456 [salt.state       :1951][INFO    ][15509] Completed state [aodh_ssl_mysql] at time 00:35:54.456522 duration_in_ms=1.372
2019-01-19 00:35:54,457 [salt.state       :1780][INFO    ][15509] Running state [aodh_ssl_rabbitmq] at time 00:35:54.457102
2019-01-19 00:35:54,457 [salt.state       :1813][INFO    ][15509] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2019-01-19 00:35:54,458 [salt.state       :300 ][INFO    ][15509] Running aodh._ssl.rabbitmq
2019-01-19 00:35:54,458 [salt.state       :1951][INFO    ][15509] Completed state [aodh_ssl_rabbitmq] at time 00:35:54.458356 duration_in_ms=1.254
2019-01-19 00:35:54,459 [salt.state       :1780][INFO    ][15509] Running state [/etc/aodh/aodh.conf] at time 00:35:54.459249
2019-01-19 00:35:54,459 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/aodh/aodh.conf]
2019-01-19 00:35:54,492 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/aodh.conf.Debian'
2019-01-19 00:35:54,576 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2019-01-19 00:35:54,700 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2019-01-19 00:35:54,721 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2019-01-19 00:35:54,781 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2019-01-19 00:35:54,826 [salt.state       :300 ][INFO    ][15509] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,55 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +133,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +144,84 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+rpc_thread_pool_size = 5
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +232,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +368,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.33
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-rFNLA3/aodh-7.0.0/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +381,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +403,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +422,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +431,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,71 +443,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -532,32 +521,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -571,36 +567,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -615,6 +1125,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -630,6 +1141,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -667,6 +1179,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -680,36 +1193,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -787,862 +1270,112 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2019-01-19 00:35:54,834 [salt.state       :1951][INFO    ][15509] Completed state [/etc/aodh/aodh.conf] at time 00:35:54.834619 duration_in_ms=375.369
2019-01-19 00:35:54,835 [salt.state       :1780][INFO    ][15509] Running state [aodh-dbsync] at time 00:35:54.835700
2019-01-19 00:35:54,835 [salt.state       :1813][INFO    ][15509] Executing state cmd.run for [aodh-dbsync]
2019-01-19 00:35:54,838 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command '/bin/false' in directory '/root'
2019-01-19 00:35:54,892 [salt.state       :300 ][INFO    ][15509] onlyif execution failed
2019-01-19 00:35:54,892 [salt.state       :1951][INFO    ][15509] Completed state [aodh-dbsync] at time 00:35:54.892851 duration_in_ms=57.149
2019-01-19 00:35:54,899 [salt.state       :1780][INFO    ][15509] Running state [apache2] at time 00:35:54.899135
2019-01-19 00:35:54,899 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [apache2]
2019-01-19 00:35:55,736 [salt.state       :300 ][INFO    ][15509] All specified packages are already installed
2019-01-19 00:35:55,737 [salt.state       :1951][INFO    ][15509] Completed state [apache2] at time 00:35:55.737156 duration_in_ms=838.02
2019-01-19 00:35:55,737 [salt.state       :1780][INFO    ][15509] Running state [openssl] at time 00:35:55.737567
2019-01-19 00:35:55,737 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [openssl]
2019-01-19 00:35:55,746 [salt.state       :300 ][INFO    ][15509] All specified packages are already installed
2019-01-19 00:35:55,747 [salt.state       :1951][INFO    ][15509] Completed state [openssl] at time 00:35:55.747079 duration_in_ms=9.512
2019-01-19 00:35:55,747 [salt.state       :1780][INFO    ][15509] Running state [a2enmod rewrite] at time 00:35:55.747830
2019-01-19 00:35:55,748 [salt.state       :1813][INFO    ][15509] Executing state cmd.run for [a2enmod rewrite]
2019-01-19 00:35:55,748 [salt.state       :300 ][INFO    ][15509] /etc/apache2/mods-enabled/rewrite.load exists
2019-01-19 00:35:55,748 [salt.state       :1951][INFO    ][15509] Completed state [a2enmod rewrite] at time 00:35:55.748924 duration_in_ms=1.094
2019-01-19 00:35:55,749 [salt.state       :1780][INFO    ][15509] Running state [libapache2-mod-wsgi] at time 00:35:55.749504
2019-01-19 00:35:55,749 [salt.state       :1813][INFO    ][15509] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-01-19 00:35:55,758 [salt.state       :300 ][INFO    ][15509] All specified packages are already installed
2019-01-19 00:35:55,758 [salt.state       :1951][INFO    ][15509] Completed state [libapache2-mod-wsgi] at time 00:35:55.758570 duration_in_ms=9.066
2019-01-19 00:35:55,759 [salt.state       :1780][INFO    ][15509] Running state [a2enmod wsgi] at time 00:35:55.759145
2019-01-19 00:35:55,759 [salt.state       :1813][INFO    ][15509] Executing state cmd.run for [a2enmod wsgi]
2019-01-19 00:35:55,759 [salt.state       :300 ][INFO    ][15509] /etc/apache2/mods-enabled/wsgi.load exists
2019-01-19 00:35:55,760 [salt.state       :1951][INFO    ][15509] Completed state [a2enmod wsgi] at time 00:35:55.760553 duration_in_ms=1.408
2019-01-19 00:35:55,762 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:35:55.762685
2019-01-19 00:35:55,763 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-01-19 00:35:55,832 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-01-19 00:35:55,833 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 00:35:55.833246 duration_in_ms=70.56
2019-01-19 00:35:55,833 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:35:55.833561
2019-01-19 00:35:55,833 [salt.state       :1813][INFO    ][15509] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-01-19 00:35:55,834 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-01-19 00:35:55,834 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 00:35:55.834571 duration_in_ms=1.01
2019-01-19 00:35:55,834 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:35:55.834864
2019-01-19 00:35:55,835 [salt.state       :1813][INFO    ][15509] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-01-19 00:35:55,835 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-01-19 00:35:55,835 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 00:35:55.835793 duration_in_ms=0.929
2019-01-19 00:35:55,836 [salt.state       :1780][INFO    ][15509] Running state [a2enmod mpm_prefork] at time 00:35:55.836688
2019-01-19 00:35:55,837 [salt.state       :1813][INFO    ][15509] Executing state cmd.run for [a2enmod mpm_prefork]
2019-01-19 00:35:55,837 [salt.state       :300 ][INFO    ][15509] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-01-19 00:35:55,837 [salt.state       :1951][INFO    ][15509] Completed state [a2enmod mpm_prefork] at time 00:35:55.837643 duration_in_ms=0.955
2019-01-19 00:35:55,837 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:35:55.837929
2019-01-19 00:35:55,838 [salt.state       :1813][INFO    ][15509] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-01-19 00:35:55,838 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-01-19 00:35:55,838 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 00:35:55.838808 duration_in_ms=0.879
2019-01-19 00:35:55,839 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:35:55.839091
2019-01-19 00:35:55,839 [salt.state       :1813][INFO    ][15509] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-01-19 00:35:55,839 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-01-19 00:35:55,839 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 00:35:55.839961 duration_in_ms=0.87
2019-01-19 00:35:55,840 [salt.state       :1780][INFO    ][15509] Running state [apache_server_service_task] at time 00:35:55.840257
2019-01-19 00:35:55,840 [salt.state       :1813][INFO    ][15509] Executing state test.show_notification for [apache_server_service_task]
2019-01-19 00:35:55,840 [salt.state       :300 ][INFO    ][15509] Running apache.server.service
2019-01-19 00:35:55,841 [salt.state       :1951][INFO    ][15509] Completed state [apache_server_service_task] at time 00:35:55.841125 duration_in_ms=0.868
2019-01-19 00:35:55,841 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/ports.conf] at time 00:35:55.841640
2019-01-19 00:35:55,841 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/apache2/ports.conf]
2019-01-19 00:35:55,923 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/ports.conf is in the correct state
2019-01-19 00:35:55,923 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/ports.conf] at time 00:35:55.923829 duration_in_ms=82.187
2019-01-19 00:35:55,924 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/conf-available/security.conf] at time 00:35:55.924426
2019-01-19 00:35:55,924 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-01-19 00:35:55,985 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/conf-available/security.conf is in the correct state
2019-01-19 00:35:55,985 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/conf-available/security.conf] at time 00:35:55.985501 duration_in_ms=61.075
2019-01-19 00:35:55,992 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 00:35:55.992777
2019-01-19 00:35:55,993 [salt.state       :1813][INFO    ][15509] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-01-19 00:35:55,993 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-01-19 00:35:55,993 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 00:35:55.993720 duration_in_ms=0.942
2019-01-19 00:35:55,994 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:35:55.994254
2019-01-19 00:35:55,994 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-01-19 00:35:56,229 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-01-19 00:35:56,229 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 00:35:56.229293 duration_in_ms=235.039
2019-01-19 00:35:56,229 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:35:56.229840
2019-01-19 00:35:56,230 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-01-19 00:35:56,452 [salt.state       :300 ][INFO    ][15509] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-01-19 00:35:56,452 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 00:35:56.452368 duration_in_ms=222.528
2019-01-19 00:35:56,455 [salt.state       :1780][INFO    ][15509] Running state [apache2] at time 00:35:56.455737
2019-01-19 00:35:56,456 [salt.state       :1813][INFO    ][15509] Executing state service.running for [apache2]
2019-01-19 00:35:56,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-01-19 00:35:56,474 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:35:56,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:35:56,505 [salt.state       :300 ][INFO    ][15509] The service apache2 is already running
2019-01-19 00:35:56,506 [salt.state       :1951][INFO    ][15509] Completed state [apache2] at time 00:35:56.506357 duration_in_ms=50.618
2019-01-19 00:35:56,507 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/conf-enabled/security.conf] at time 00:35:56.507545
2019-01-19 00:35:56,507 [salt.state       :1813][INFO    ][15509] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-01-19 00:35:56,512 [salt.state       :300 ][INFO    ][15509] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-01-19 00:35:56,512 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/conf-enabled/security.conf] at time 00:35:56.512428 duration_in_ms=4.883
2019-01-19 00:35:56,513 [salt.state       :1780][INFO    ][15509] Running state [/etc/default/aodh-evaluator] at time 00:35:56.513384
2019-01-19 00:35:56,513 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/default/aodh-evaluator]
2019-01-19 00:35:56,538 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2019-01-19 00:35:56,550 [salt.state       :300 ][INFO    ][15509] File changed:
New file
2019-01-19 00:35:56,550 [salt.state       :1951][INFO    ][15509] Completed state [/etc/default/aodh-evaluator] at time 00:35:56.550648 duration_in_ms=37.265
2019-01-19 00:35:56,551 [salt.state       :1780][INFO    ][15509] Running state [/etc/default/aodh-notifier] at time 00:35:56.551194
2019-01-19 00:35:56,551 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/default/aodh-notifier]
2019-01-19 00:35:56,583 [salt.state       :300 ][INFO    ][15509] File changed:
New file
2019-01-19 00:35:56,583 [salt.state       :1951][INFO    ][15509] Completed state [/etc/default/aodh-notifier] at time 00:35:56.583370 duration_in_ms=32.175
2019-01-19 00:35:56,583 [salt.state       :1780][INFO    ][15509] Running state [/etc/default/aodh-listener] at time 00:35:56.583916
2019-01-19 00:35:56,584 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/default/aodh-listener]
2019-01-19 00:35:56,606 [salt.state       :300 ][INFO    ][15509] File changed:
New file
2019-01-19 00:35:56,607 [salt.state       :1951][INFO    ][15509] Completed state [/etc/default/aodh-listener] at time 00:35:56.607189 duration_in_ms=23.272
2019-01-19 00:35:56,607 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 00:35:56.607729
2019-01-19 00:35:56,608 [salt.state       :1813][INFO    ][15509] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2019-01-19 00:35:56,634 [salt.fileclient  :1219][INFO    ][15509] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/apache-aodh.apache2.conf.Debian'
2019-01-19 00:35:56,686 [salt.state       :300 ][INFO    ][15509] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.33:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2019-01-19 00:35:56,687 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 00:35:56.687541 duration_in_ms=79.811
2019-01-19 00:35:56,687 [salt.state       :1780][INFO    ][15509] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 00:35:56.687859
2019-01-19 00:35:56,688 [salt.state       :1813][INFO    ][15509] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2019-01-19 00:35:56,691 [salt.state       :300 ][INFO    ][15509] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2019-01-19 00:35:56,691 [salt.state       :1951][INFO    ][15509] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 00:35:56.691413 duration_in_ms=3.554
2019-01-19 00:35:56,692 [salt.state       :1780][INFO    ][15509] Running state [apache2] at time 00:35:56.692674
2019-01-19 00:35:56,693 [salt.state       :1813][INFO    ][15509] Executing state service.running for [apache2]
2019-01-19 00:35:56,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:35:56,714 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-19 00:35:56,734 [salt.state       :300 ][INFO    ][15509] The service apache2 is already running
2019-01-19 00:35:56,735 [salt.state       :1951][INFO    ][15509] Completed state [apache2] at time 00:35:56.735285 duration_in_ms=42.608
2019-01-19 00:35:56,735 [salt.state       :1780][INFO    ][15509] Running state [apache2] at time 00:35:56.735644
2019-01-19 00:35:56,736 [salt.state       :1813][INFO    ][15509] Executing state service.mod_watch for [apache2]
2019-01-19 00:35:56,736 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-19 00:35:56,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-01-19 00:35:59,037 [salt.state       :300 ][INFO    ][15509] {'apache2': True}
2019-01-19 00:35:59,038 [salt.state       :1951][INFO    ][15509] Completed state [apache2] at time 00:35:59.038233 duration_in_ms=2302.589
2019-01-19 00:35:59,041 [salt.state       :1780][INFO    ][15509] Running state [aodh-evaluator] at time 00:35:59.041556
2019-01-19 00:35:59,042 [salt.state       :1813][INFO    ][15509] Executing state service.running for [aodh-evaluator]
2019-01-19 00:35:59,043 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2019-01-19 00:35:59,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-01-19 00:35:59,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2019-01-19 00:35:59,094 [salt.state       :300 ][INFO    ][15509] The service aodh-evaluator is already running
2019-01-19 00:35:59,094 [salt.state       :1951][INFO    ][15509] Completed state [aodh-evaluator] at time 00:35:59.094799 duration_in_ms=53.24
2019-01-19 00:35:59,095 [salt.state       :1780][INFO    ][15509] Running state [aodh-evaluator] at time 00:35:59.095085
2019-01-19 00:35:59,095 [salt.state       :1813][INFO    ][15509] Executing state service.mod_watch for [aodh-evaluator]
2019-01-19 00:35:59,096 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-01-19 00:35:59,112 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2019-01-19 00:35:59,257 [salt.state       :300 ][INFO    ][15509] {'aodh-evaluator': True}
2019-01-19 00:35:59,257 [salt.state       :1951][INFO    ][15509] Completed state [aodh-evaluator] at time 00:35:59.257914 duration_in_ms=162.827
2019-01-19 00:35:59,259 [salt.state       :1780][INFO    ][15509] Running state [aodh-notifier] at time 00:35:59.259460
2019-01-19 00:35:59,259 [salt.state       :1813][INFO    ][15509] Executing state service.running for [aodh-notifier]
2019-01-19 00:35:59,266 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2019-01-19 00:35:59,306 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-01-19 00:35:59,350 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2019-01-19 00:35:59,382 [salt.state       :300 ][INFO    ][15509] The service aodh-notifier is already running
2019-01-19 00:35:59,382 [salt.state       :1951][INFO    ][15509] Completed state [aodh-notifier] at time 00:35:59.382548 duration_in_ms=123.086
2019-01-19 00:35:59,382 [salt.state       :1780][INFO    ][15509] Running state [aodh-notifier] at time 00:35:59.382877
2019-01-19 00:35:59,383 [salt.state       :1813][INFO    ][15509] Executing state service.mod_watch for [aodh-notifier]
2019-01-19 00:35:59,392 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-01-19 00:35:59,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2019-01-19 00:36:01,503 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003601493171
2019-01-19 00:36:01,517 [salt.minion      :1432][INFO    ][22762] Starting a new job with PID 22762
2019-01-19 00:36:01,545 [salt.minion      :1711][INFO    ][22762] Returning information for job: 20190119003601493171
2019-01-19 00:36:11,650 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003611635480
2019-01-19 00:36:11,670 [salt.minion      :1432][INFO    ][22790] Starting a new job with PID 22790
2019-01-19 00:36:11,686 [salt.minion      :1711][INFO    ][22790] Returning information for job: 20190119003611635480
2019-01-19 00:36:14,669 [salt.state       :300 ][INFO    ][15509] {'aodh-notifier': True}
2019-01-19 00:36:14,674 [salt.state       :1951][INFO    ][15509] Completed state [aodh-notifier] at time 00:36:14.674055 duration_in_ms=15291.175
2019-01-19 00:36:14,675 [salt.state       :1780][INFO    ][15509] Running state [aodh-listener] at time 00:36:14.675821
2019-01-19 00:36:14,676 [salt.state       :1813][INFO    ][15509] Executing state service.running for [aodh-listener]
2019-01-19 00:36:14,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2019-01-19 00:36:14,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-01-19 00:36:14,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2019-01-19 00:36:14,734 [salt.state       :300 ][INFO    ][15509] The service aodh-listener is already running
2019-01-19 00:36:14,735 [salt.state       :1951][INFO    ][15509] Completed state [aodh-listener] at time 00:36:14.735096 duration_in_ms=59.273
2019-01-19 00:36:14,735 [salt.state       :1780][INFO    ][15509] Running state [aodh-listener] at time 00:36:14.735568
2019-01-19 00:36:14,736 [salt.state       :1813][INFO    ][15509] Executing state service.mod_watch for [aodh-listener]
2019-01-19 00:36:14,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-01-19 00:36:14,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15509] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2019-01-19 00:36:21,778 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003621766332
2019-01-19 00:36:21,801 [salt.minion      :1432][INFO    ][22837] Starting a new job with PID 22837
2019-01-19 00:36:21,821 [salt.minion      :1711][INFO    ][22837] Returning information for job: 20190119003621766332
2019-01-19 00:36:29,921 [salt.state       :300 ][INFO    ][15509] {'aodh-listener': True}
2019-01-19 00:36:29,921 [salt.state       :1951][INFO    ][15509] Completed state [aodh-listener] at time 00:36:29.921882 duration_in_ms=15186.312
2019-01-19 00:36:29,929 [salt.minion      :1711][INFO    ][15509] Returning information for job: 20190119003510891607
2019-01-19 00:37:55,571 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command state.sls with jid 20190119003755560834
2019-01-19 00:37:55,598 [salt.minion      :1432][INFO    ][22886] Starting a new job with PID 22886
2019-01-19 00:38:03,619 [salt.state       :915 ][INFO    ][22886] Loading fresh modules for state activity
2019-01-19 00:38:03,685 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2019-01-19 00:38:03,727 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2019-01-19 00:38:03,874 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2019-01-19 00:38:04,032 [salt.utils.schedule:1377][INFO    ][1415] Running scheduled job: __mine_interval
2019-01-19 00:38:05,497 [salt.state       :1780][INFO    ][22886] Running state [ceilometer-agent-central] at time 00:38:05.497179
2019-01-19 00:38:05,497 [salt.state       :1813][INFO    ][22886] Executing state pkg.installed for [ceilometer-agent-central]
2019-01-19 00:38:05,498 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:38:05,631 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003805616664
2019-01-19 00:38:05,648 [salt.minion      :1432][INFO    ][22916] Starting a new job with PID 22916
2019-01-19 00:38:05,660 [salt.minion      :1711][INFO    ][22916] Returning information for job: 20190119003805616664
2019-01-19 00:38:05,863 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2019-01-19 00:38:05,942 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-19 00:38:07,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:38:07,749 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2019-01-19 00:38:15,845 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003815831253
2019-01-19 00:38:15,858 [salt.minion      :1432][INFO    ][24015] Starting a new job with PID 24015
2019-01-19 00:38:15,878 [salt.minion      :1711][INFO    ][24015] Returning information for job: 20190119003815831253
2019-01-19 00:38:25,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:38:25,084 [salt.state       :300 ][INFO    ][22886] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-pysmi' changed from 'absent' to '0.2.2-2~u16.04+mcp'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2ubuntu0.16.04.1'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.4.3-1~u16.04+mcp'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-oslo-rootwrap' changed from 'absent' to '1'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-pycryptodome' changed from 'absent' to '3.4.7-1.1~u16.04+mcp'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2019-01-19 00:38:25,119 [salt.state       :915 ][INFO    ][22886] Loading fresh modules for state activity
2019-01-19 00:38:25,298 [salt.state       :1951][INFO    ][22886] Completed state [ceilometer-agent-central] at time 00:38:25.298486 duration_in_ms=19801.307
2019-01-19 00:38:25,303 [salt.state       :1780][INFO    ][22886] Running state [python-ceilometerclient] at time 00:38:25.303608
2019-01-19 00:38:25,303 [salt.state       :1813][INFO    ][22886] Executing state pkg.installed for [python-ceilometerclient]
2019-01-19 00:38:26,011 [salt.state       :300 ][INFO    ][22886] All specified packages are already installed
2019-01-19 00:38:26,011 [salt.state       :1951][INFO    ][22886] Completed state [python-ceilometerclient] at time 00:38:26.011542 duration_in_ms=707.934
2019-01-19 00:38:26,011 [salt.state       :1780][INFO    ][22886] Running state [ceilometer-agent-notification] at time 00:38:26.011877
2019-01-19 00:38:26,012 [salt.state       :1813][INFO    ][22886] Executing state pkg.installed for [ceilometer-agent-notification]
2019-01-19 00:38:26,036 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-19 00:38:26,058 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command saltutil.find_job with jid 20190119003826049519
2019-01-19 00:38:26,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2019-01-19 00:38:26,074 [salt.minion      :1432][INFO    ][25457] Starting a new job with PID 25457
2019-01-19 00:38:26,091 [salt.minion      :1711][INFO    ][25457] Returning information for job: 20190119003826049519
2019-01-19 00:38:28,797 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-19 00:38:28,908 [salt.state       :300 ][INFO    ][22886] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:11.0.1-1~u16.04+mcp7'

2019-01-19 00:38:28,929 [salt.state       :915 ][INFO    ][22886] Loading fresh modules for state activity
2019-01-19 00:38:28,964 [salt.state       :1951][INFO    ][22886] Completed state [ceilometer-agent-notification] at time 00:38:28.964516 duration_in_ms=2952.639
2019-01-19 00:38:28,966 [salt.state       :1780][INFO    ][22886] Running state [ceilometer_ssl_rabbitmq] at time 00:38:28.966903
2019-01-19 00:38:28,967 [salt.state       :1813][INFO    ][22886] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2019-01-19 00:38:28,967 [salt.state       :300 ][INFO    ][22886] Running ceilometer._ssl.rabbitmq
2019-01-19 00:38:28,968 [salt.state       :1951][INFO    ][22886] Completed state [ceilometer_ssl_rabbitmq] at time 00:38:28.968237 duration_in_ms=1.334
2019-01-19 00:38:28,970 [salt.state       :1780][INFO    ][22886] Running state [/etc/ceilometer/ceilometer.conf] at time 00:38:28.970256
2019-01-19 00:38:28,970 [salt.state       :1813][INFO    ][22886] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2019-01-19 00:38:29,003 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/ceilometer-server.conf.Debian'
2019-01-19 00:38:29,232 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2019-01-19 00:38:29,321 [salt.state       :300 ][INFO    ][22886] File changed:
--- 
+++ 
@@ -1,15 +1,330 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: To reduce polling agent load, samples are sent to the
-# notification agent in a batch. To gain higher throughput at the cost of load
-# set this to False. This option is deprecated, to disable batching set
-# batch_size = 0 in the polling group. (boolean value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
 #batch_polled_samples = true
 
 # Inspector to use for inspecting the hypervisor layer. Known inspectors are
@@ -70,372 +385,6 @@
 # Minimum value: 1
 #max_parallel_requests = 64
 
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
 
 [coordination]
 
@@ -448,6 +397,7 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
@@ -529,52 +479,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -593,7 +497,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-yNzi7g/ceilometer-11.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -619,6 +523,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -636,6 +541,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -666,633 +572,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1307,10 +586,6 @@
 # pool with the same partitioning_group_prefix a disjoint subset of pollsters
 # should be loaded. (string value)
 #partitioning_group_prefix = <None>
-
-# Batch size of samples to send to notification agent, Set to 0 to disable
-# (integer value)
-#batch_size = 50
 
 
 [publisher]
@@ -1325,6 +600,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1357,87 +633,115 @@
 #secret_key = <None>
 
 
-[rgw_client]
-
-#
-# From ceilometer
-#
-
-# Whether RGW uses implicit tenants or not. (boolean value)
-#implicit_tenants = false
-
-
 [service_credentials]
 
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1450,7 +754,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1485,58 +789,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (host address value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25

2019-01-19 00:38:29,322 [salt.state       :1951][INFO    ][22886] Completed state [/etc/ceilometer/ceilometer.conf] at time 00:38:29.322671 duration_in_ms=352.415
2019-01-19 00:38:29,323 [salt.state       :1780][INFO    ][22886] Running state [/etc/default/ceilometer-agent-central] at time 00:38:29.323031
2019-01-19 00:38:29,323 [salt.state       :1813][INFO    ][22886] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2019-01-19 00:38:29,360 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2019-01-19 00:38:29,374 [salt.state       :300 ][INFO    ][22886] File changed:
New file
2019-01-19 00:38:29,374 [salt.state       :1951][INFO    ][22886] Completed state [/etc/default/ceilometer-agent-central] at time 00:38:29.374297 duration_in_ms=51.265
2019-01-19 00:38:29,374 [salt.state       :1780][INFO    ][22886] Running state [/etc/default/ceilometer-agent-notification] at time 00:38:29.374632
2019-01-19 00:38:29,374 [salt.state       :1813][INFO    ][22886] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2019-01-19 00:38:29,453 [salt.state       :300 ][INFO    ][22886] File changed:
New file
2019-01-19 00:38:29,454 [salt.state       :1951][INFO    ][22886] Completed state [/etc/default/ceilometer-agent-notification] at time 00:38:29.453962 duration_in_ms=79.329
2019-01-19 00:38:29,477 [salt.state       :1780][INFO    ][22886] Running state [python-gnocchiclient] at time 00:38:29.477170
2019-01-19 00:38:29,477 [salt.state       :1813][INFO    ][22886] Executing state pkg.latest for [python-gnocchiclient]
2019-01-19 00:38:29,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2019-01-19 00:38:29,703 [salt.state       :300 ][INFO    ][22886] Package python-gnocchiclient is already up-to-date
2019-01-19 00:38:29,708 [salt.state       :1951][INFO    ][22886] Completed state [python-gnocchiclient] at time 00:38:29.708679 duration_in_ms=231.499
2019-01-19 00:38:29,709 [salt.state       :1780][INFO    ][22886] Running state [/etc/ceilometer/pipeline.yaml] at time 00:38:29.709367
2019-01-19 00:38:29,709 [salt.state       :1813][INFO    ][22886] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2019-01-19 00:38:29,735 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/pipeline.yaml'
2019-01-19 00:38:29,853 [salt.state       :300 ][INFO    ][22886] File changed:
New file
2019-01-19 00:38:29,853 [salt.state       :1951][INFO    ][22886] Completed state [/etc/ceilometer/pipeline.yaml] at time 00:38:29.853719 duration_in_ms=144.352
2019-01-19 00:38:29,854 [salt.state       :1780][INFO    ][22886] Running state [/etc/ceilometer/event_pipeline.yaml] at time 00:38:29.854087
2019-01-19 00:38:29,854 [salt.state       :1813][INFO    ][22886] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2019-01-19 00:38:29,877 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_pipeline.yaml'
2019-01-19 00:38:29,973 [salt.state       :300 ][INFO    ][22886] File changed:
New file
2019-01-19 00:38:29,973 [salt.state       :1951][INFO    ][22886] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 00:38:29.973885 duration_in_ms=119.797
2019-01-19 00:38:29,974 [salt.state       :1780][INFO    ][22886] Running state [/etc/ceilometer/event_definitions.yaml] at time 00:38:29.974263
2019-01-19 00:38:29,974 [salt.state       :1813][INFO    ][22886] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2019-01-19 00:38:30,002 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_definitions.yaml'
2019-01-19 00:38:30,021 [salt.state       :300 ][INFO    ][22886] File changed:
New file
2019-01-19 00:38:30,022 [salt.state       :1951][INFO    ][22886] Completed state [/etc/ceilometer/event_definitions.yaml] at time 00:38:30.022195 duration_in_ms=47.932
2019-01-19 00:38:30,022 [salt.state       :1780][INFO    ][22886] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 00:38:30.022613
2019-01-19 00:38:30,022 [salt.state       :1813][INFO    ][22886] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2019-01-19 00:38:30,081 [salt.fileclient  :1219][INFO    ][22886] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gabbi_pipeline.yaml'
2019-01-19 00:38:30,088 [salt.state       :300 ][INFO    ][22886] File changed:
New file
2019-01-19 00:38:30,092 [salt.state       :1951][INFO    ][22886] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 00:38:30.092427 duration_in_ms=69.814
2019-01-19 00:38:30,575 [salt.state       :1780][INFO    ][22886] Running state [ceilometer-agent-central] at time 00:38:30.575080
2019-01-19 00:38:30,575 [salt.state       :1813][INFO    ][22886] Executing state service.running for [ceilometer-agent-central]
2019-01-19 00:38:30,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2019-01-19 00:38:30,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-19 00:38:30,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-19 00:38:30,625 [salt.state       :300 ][INFO    ][22886] The service ceilometer-agent-central is already running
2019-01-19 00:38:30,625 [salt.state       :1951][INFO    ][22886] Completed state [ceilometer-agent-central] at time 00:38:30.625575 duration_in_ms=50.493
2019-01-19 00:38:30,626 [salt.state       :1780][INFO    ][22886] Running state [ceilometer-agent-central] at time 00:38:30.625963
2019-01-19 00:38:30,626 [salt.state       :1813][INFO    ][22886] Executing state service.mod_watch for [ceilometer-agent-central]
2019-01-19 00:38:30,627 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-19 00:38:30,641 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-19 00:38:30,819 [salt.state       :300 ][INFO    ][22886] {'ceilometer-agent-central': True}
2019-01-19 00:38:30,820 [salt.state       :1951][INFO    ][22886] Completed state [ceilometer-agent-central] at time 00:38:30.820213 duration_in_ms=194.248
2019-01-19 00:38:30,828 [salt.state       :1780][INFO    ][22886] Running state [ceilometer-agent-notification] at time 00:38:30.828788
2019-01-19 00:38:30,829 [salt.state       :1813][INFO    ][22886] Executing state service.running for [ceilometer-agent-notification]
2019-01-19 00:38:30,831 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2019-01-19 00:38:30,865 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-19 00:38:30,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-19 00:38:30,901 [salt.state       :300 ][INFO    ][22886] The service ceilometer-agent-notification is already running
2019-01-19 00:38:30,901 [salt.state       :1951][INFO    ][22886] Completed state [ceilometer-agent-notification] at time 00:38:30.901759 duration_in_ms=72.969
2019-01-19 00:38:30,902 [salt.state       :1780][INFO    ][22886] Running state [ceilometer-agent-notification] at time 00:38:30.902091
2019-01-19 00:38:30,902 [salt.state       :1813][INFO    ][22886] Executing state service.mod_watch for [ceilometer-agent-notification]
2019-01-19 00:38:30,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-19 00:38:30,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22886] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-19 00:38:31,054 [salt.state       :300 ][INFO    ][22886] {'ceilometer-agent-notification': True}
2019-01-19 00:38:31,054 [salt.state       :1951][INFO    ][22886] Completed state [ceilometer-agent-notification] at time 00:38:31.054527 duration_in_ms=152.433
2019-01-19 00:38:31,063 [salt.minion      :1711][INFO    ][22886] Returning information for job: 20190119003755560834
2019-01-19 00:43:21,631 [salt.minion      :1308][INFO    ][1415] User sudo_ubuntu Executing command cp.push_dir with jid 20190119004321619400
2019-01-19 00:43:21,659 [salt.minion      :1432][INFO    ][25895] Starting a new job with PID 25895
