2019-01-10 09:27:00,508 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,600 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,602 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,604 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,606 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,838 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,841 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,844 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,890 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,893 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,896 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,898 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:00,982 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,010 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,013 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,016 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,019 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,023 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,026 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,029 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,032 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,036 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,039 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,042 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,046 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,049 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,052 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,055 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,059 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,062 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,066 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,069 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,072 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,075 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,079 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,082 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,085 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,089 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,092 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,095 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,099 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,102 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,106 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,109 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,112 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,116 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,119 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,123 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,126 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,129 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,133 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,136 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,139 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,143 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,146 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,150 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:01,154 [salt.utils.decorators:82  ][ERROR   ][1745] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2019-01-10 09:27:16,105 [salt.utils.decorators:613 ][WARNING ][1745] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-10 09:27:18,122 [salt.loaded.int.states.file:2298][WARNING ][1745] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:27:19,238 [salt.loaded.int.states.file:2298][WARNING ][1745] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:27:21,641 [salt.loaded.int.states.file:2298][WARNING ][1745] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:27:24,867 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2975] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2019-01-10 09:27:24,888 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2975] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2019-01-10 09:27:24,924 [salt.utils.parsers:1051][WARNING ][1390] Minion received a SIGTERM. Exiting.
2019-01-10 09:27:25,741 [salt.cli.daemons :293 ][INFO    ][3030] Setting up the Salt Minion "mdb03.mcp-odl-ha.local"
2019-01-10 09:27:25,827 [salt.cli.daemons :82  ][INFO    ][3030] Starting up the Salt Minion
2019-01-10 09:27:25,828 [salt.utils.event :1017][INFO    ][3030] Starting pull socket on /var/run/salt/minion/minion_event_4701d3a5d9_pull.ipc
2019-01-10 09:27:26,379 [salt.minion      :976 ][INFO    ][3030] Creating minion process manager
2019-01-10 09:27:27,730 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3030] Executing command ['date', '+%z'] in directory '/root'
2019-01-10 09:27:27,746 [salt.utils.schedule:568 ][INFO    ][3030] Updating job settings for scheduled job: __mine_interval
2019-01-10 09:27:27,748 [salt.minion      :1108][INFO    ][3030] Added mine.update to scheduler
2019-01-10 09:27:27,753 [salt.minion      :1975][INFO    ][3030] Minion is starting as user 'root'
2019-01-10 09:27:27,764 [salt.minion      :2336][INFO    ][3030] Minion is ready to receive requests!
2019-01-10 09:27:59,547 [salt.minion      :1308][INFO    ][3030] User sudo_ubuntu Executing command state.apply with jid 20190110092759537469
2019-01-10 09:27:59,564 [salt.minion      :1432][INFO    ][3122] Starting a new job with PID 3122
2019-01-10 09:28:09,614 [salt.minion      :1308][INFO    ][3030] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110092809601839
2019-01-10 09:28:09,629 [salt.minion      :1432][INFO    ][3129] Starting a new job with PID 3129
2019-01-10 09:28:09,648 [salt.minion      :1711][INFO    ][3129] Returning information for job: 20190110092809601839
2019-01-10 09:28:11,191 [salt.state       :915 ][INFO    ][3122] Loading fresh modules for state activity
2019-01-10 09:28:11,882 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2019-01-10 09:28:11,916 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2019-01-10 09:28:12,057 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2019-01-10 09:28:12,158 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2019-01-10 09:28:12,257 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2019-01-10 09:28:12,359 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2019-01-10 09:28:12,479 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2019-01-10 09:28:12,611 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2019-01-10 09:28:12,748 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2019-01-10 09:28:12,934 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2019-01-10 09:28:13,067 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2019-01-10 09:28:13,185 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2019-01-10 09:28:13,382 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2019-01-10 09:28:13,414 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2019-01-10 09:28:13,524 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2019-01-10 09:28:14,523 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2019-01-10 09:28:14,643 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2019-01-10 09:28:14,788 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2019-01-10 09:28:14,906 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2019-01-10 09:28:15,016 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2019-01-10 09:28:15,122 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2019-01-10 09:28:15,271 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2019-01-10 09:28:15,422 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2019-01-10 09:28:15,544 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2019-01-10 09:28:15,662 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2019-01-10 09:28:15,782 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2019-01-10 09:28:15,899 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2019-01-10 09:28:16,094 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2019-01-10 09:28:17,195 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2019-01-10 09:28:17,930 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2019-01-10 09:28:18,051 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2019-01-10 09:28:18,184 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2019-01-10 09:28:18,208 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2019-01-10 09:28:18,256 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2019-01-10 09:28:18,305 [salt.state       :1780][INFO    ][3122] Running state [/etc/environment] at time 09:28:18.304930
2019-01-10 09:28:18,305 [salt.state       :1813][INFO    ][3122] Executing state file.blockreplace for [/etc/environment]
2019-01-10 09:28:18,313 [salt.state       :300 ][INFO    ][3122] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2019-01-10 09:28:18,313 [salt.state       :1951][INFO    ][3122] Completed state [/etc/environment] at time 09:28:18.313549 duration_in_ms=8.62
2019-01-10 09:28:18,313 [salt.state       :1780][INFO    ][3122] Running state [/etc/profile.d] at time 09:28:18.313823
2019-01-10 09:28:18,314 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/profile.d]
2019-01-10 09:28:18,315 [salt.state       :300 ][INFO    ][3122] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2019-01-10 09:28:18,316 [salt.state       :1951][INFO    ][3122] Completed state [/etc/profile.d] at time 09:28:18.316006 duration_in_ms=2.183
2019-01-10 09:28:18,316 [salt.state       :1780][INFO    ][3122] Running state [/etc/bash.bashrc] at time 09:28:18.316220
2019-01-10 09:28:18,316 [salt.state       :1813][INFO    ][3122] Executing state file.blockreplace for [/etc/bash.bashrc]
2019-01-10 09:28:18,997 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['git', '--version'] in directory '/root'
2019-01-10 09:28:19,138 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2019-01-10 09:28:19,151 [salt.state       :300 ][INFO    ][3122] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-01-10 09:28:19,152 [salt.state       :1951][INFO    ][3122] Completed state [/etc/bash.bashrc] at time 09:28:19.152218 duration_in_ms=835.997
2019-01-10 09:28:19,152 [salt.state       :1780][INFO    ][3122] Running state [/etc/profile] at time 09:28:19.152578
2019-01-10 09:28:19,152 [salt.state       :1813][INFO    ][3122] Executing state file.blockreplace for [/etc/profile]
2019-01-10 09:28:19,159 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'test -f /etc/profile' in directory '/root'
2019-01-10 09:28:19,174 [salt.state       :300 ][INFO    ][3122] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2019-01-10 09:28:19,174 [salt.state       :1951][INFO    ][3122] Completed state [/etc/profile] at time 09:28:19.174740 duration_in_ms=22.16
2019-01-10 09:28:19,175 [salt.state       :1780][INFO    ][3122] Running state [/etc/login.defs] at time 09:28:19.175090
2019-01-10 09:28:19,175 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/login.defs]
2019-01-10 09:28:19,198 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2019-01-10 09:28:19,306 [salt.state       :300 ][INFO    ][3122] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2019-01-10 09:28:19,307 [salt.state       :1951][INFO    ][3122] Completed state [/etc/login.defs] at time 09:28:19.307600 duration_in_ms=132.51
2019-01-10 09:28:19,315 [salt.state       :1780][INFO    ][3122] Running state [at] at time 09:28:19.315392
2019-01-10 09:28:19,315 [salt.state       :1813][INFO    ][3122] Executing state pkg.installed for [at]
2019-01-10 09:28:19,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:28:19,666 [salt.state       :300 ][INFO    ][3122] All specified packages are already installed
2019-01-10 09:28:19,667 [salt.state       :1951][INFO    ][3122] Completed state [at] at time 09:28:19.667309 duration_in_ms=351.917
2019-01-10 09:28:19,670 [salt.state       :1780][INFO    ][3122] Running state [atd] at time 09:28:19.670025
2019-01-10 09:28:19,670 [salt.state       :1813][INFO    ][3122] Executing state service.running for [atd]
2019-01-10 09:28:19,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2019-01-10 09:28:19,700 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2019-01-10 09:28:19,713 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2019-01-10 09:28:19,728 [salt.state       :300 ][INFO    ][3122] The service atd is already running
2019-01-10 09:28:19,728 [salt.state       :1951][INFO    ][3122] Completed state [atd] at time 09:28:19.728815 duration_in_ms=58.79
2019-01-10 09:28:19,731 [salt.state       :1780][INFO    ][3122] Running state [cron] at time 09:28:19.731600
2019-01-10 09:28:19,732 [salt.state       :1813][INFO    ][3122] Executing state pkg.installed for [cron]
2019-01-10 09:28:19,741 [salt.state       :300 ][INFO    ][3122] All specified packages are already installed
2019-01-10 09:28:19,741 [salt.state       :1951][INFO    ][3122] Completed state [cron] at time 09:28:19.741627 duration_in_ms=10.027
2019-01-10 09:28:19,742 [salt.state       :1780][INFO    ][3122] Running state [/etc/at.allow] at time 09:28:19.742654
2019-01-10 09:28:19,742 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/at.allow]
2019-01-10 09:28:19,773 [salt.minion      :1308][INFO    ][3030] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110092819763179
2019-01-10 09:28:19,792 [salt.minion      :1432][INFO    ][3221] Starting a new job with PID 3221
2019-01-10 09:28:19,808 [salt.minion      :1711][INFO    ][3221] Returning information for job: 20190110092819763179
2019-01-10 09:28:20,803 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2019-01-10 09:28:20,815 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:20,816 [salt.state       :1951][INFO    ][3122] Completed state [/etc/at.allow] at time 09:28:20.816160 duration_in_ms=1073.505
2019-01-10 09:28:20,816 [salt.state       :1780][INFO    ][3122] Running state [/etc/at.deny] at time 09:28:20.816679
2019-01-10 09:28:20,817 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/at.deny]
2019-01-10 09:28:20,817 [salt.state       :300 ][INFO    ][3122] {'removed': '/etc/at.deny'}
2019-01-10 09:28:20,818 [salt.state       :1951][INFO    ][3122] Completed state [/etc/at.deny] at time 09:28:20.818294 duration_in_ms=1.615
2019-01-10 09:28:20,819 [salt.state       :1780][INFO    ][3122] Running state [cron] at time 09:28:20.819879
2019-01-10 09:28:20,820 [salt.state       :1813][INFO    ][3122] Executing state service.running for [cron]
2019-01-10 09:28:20,821 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2019-01-10 09:28:20,839 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2019-01-10 09:28:20,854 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2019-01-10 09:28:20,869 [salt.state       :300 ][INFO    ][3122] The service cron is already running
2019-01-10 09:28:20,870 [salt.state       :1951][INFO    ][3122] Completed state [cron] at time 09:28:20.870185 duration_in_ms=50.305
2019-01-10 09:28:20,872 [salt.state       :1780][INFO    ][3122] Running state [/etc/cron.allow] at time 09:28:20.872244
2019-01-10 09:28:20,872 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/cron.allow]
2019-01-10 09:28:20,894 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:20,895 [salt.state       :1951][INFO    ][3122] Completed state [/etc/cron.allow] at time 09:28:20.895587 duration_in_ms=23.343
2019-01-10 09:28:20,896 [salt.state       :1780][INFO    ][3122] Running state [/etc/cron.deny] at time 09:28:20.896086
2019-01-10 09:28:20,896 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/cron.deny]
2019-01-10 09:28:20,897 [salt.state       :300 ][INFO    ][3122] File /etc/cron.deny is not present
2019-01-10 09:28:20,897 [salt.state       :1951][INFO    ][3122] Completed state [/etc/cron.deny] at time 09:28:20.897581 duration_in_ms=1.496
2019-01-10 09:28:20,899 [salt.state       :1780][INFO    ][3122] Running state [/etc/crontab] at time 09:28:20.898960
2019-01-10 09:28:20,899 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/crontab]
2019-01-10 09:28:20,900 [salt.state       :300 ][INFO    ][3122] {'mode': '0600'}
2019-01-10 09:28:20,901 [salt.state       :1951][INFO    ][3122] Completed state [/etc/crontab] at time 09:28:20.901042 duration_in_ms=2.082
2019-01-10 09:28:20,902 [salt.state       :1780][INFO    ][3122] Running state [/etc/cron.d] at time 09:28:20.902288
2019-01-10 09:28:20,902 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/cron.d]
2019-01-10 09:28:20,904 [salt.state       :300 ][INFO    ][3122] {'mode': '0600'}
2019-01-10 09:28:20,904 [salt.state       :1951][INFO    ][3122] Completed state [/etc/cron.d] at time 09:28:20.904764 duration_in_ms=2.477
2019-01-10 09:28:20,906 [salt.state       :1780][INFO    ][3122] Running state [/etc/cron.daily] at time 09:28:20.906031
2019-01-10 09:28:20,906 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/cron.daily]
2019-01-10 09:28:20,908 [salt.state       :300 ][INFO    ][3122] {'mode': '0600'}
2019-01-10 09:28:20,909 [salt.state       :1951][INFO    ][3122] Completed state [/etc/cron.daily] at time 09:28:20.908977 duration_in_ms=2.946
2019-01-10 09:28:20,910 [salt.state       :1780][INFO    ][3122] Running state [/etc/cron.hourly] at time 09:28:20.910271
2019-01-10 09:28:20,910 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/cron.hourly]
2019-01-10 09:28:20,912 [salt.state       :300 ][INFO    ][3122] {'mode': '0600'}
2019-01-10 09:28:20,912 [salt.state       :1951][INFO    ][3122] Completed state [/etc/cron.hourly] at time 09:28:20.912849 duration_in_ms=2.578
2019-01-10 09:28:20,914 [salt.state       :1780][INFO    ][3122] Running state [/etc/cron.monthly] at time 09:28:20.914122
2019-01-10 09:28:20,914 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/cron.monthly]
2019-01-10 09:28:20,915 [salt.state       :300 ][INFO    ][3122] {'mode': '0600'}
2019-01-10 09:28:20,916 [salt.state       :1951][INFO    ][3122] Completed state [/etc/cron.monthly] at time 09:28:20.916392 duration_in_ms=2.27
2019-01-10 09:28:20,917 [salt.state       :1780][INFO    ][3122] Running state [/etc/cron.weekly] at time 09:28:20.917610
2019-01-10 09:28:20,918 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/cron.weekly]
2019-01-10 09:28:20,919 [salt.state       :300 ][INFO    ][3122] {'mode': '0600'}
2019-01-10 09:28:20,920 [salt.state       :1951][INFO    ][3122] Completed state [/etc/cron.weekly] at time 09:28:20.920270 duration_in_ms=2.659
2019-01-10 09:28:20,923 [salt.state       :1780][INFO    ][3122] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 09:28:20.923933
2019-01-10 09:28:20,924 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2019-01-10 09:28:20,941 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2019-01-10 09:28:20,955 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:20,955 [salt.state       :1951][INFO    ][3122] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 09:28:20.955796 duration_in_ms=31.863
2019-01-10 09:28:20,956 [salt.state       :1780][INFO    ][3122] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 09:28:20.956281
2019-01-10 09:28:20,956 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2019-01-10 09:28:20,979 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:20,980 [salt.state       :1951][INFO    ][3122] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 09:28:20.980558 duration_in_ms=24.276
2019-01-10 09:28:20,982 [salt.state       :1780][INFO    ][3122] Running state [linux_repo_prereq_pkgs] at time 09:28:20.982697
2019-01-10 09:28:20,983 [salt.state       :1813][INFO    ][3122] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2019-01-10 09:28:20,993 [salt.state       :300 ][INFO    ][3122] All specified packages are already installed
2019-01-10 09:28:20,994 [salt.state       :1951][INFO    ][3122] Completed state [linux_repo_prereq_pkgs] at time 09:28:20.994243 duration_in_ms=11.546
2019-01-10 09:28:20,994 [salt.state       :1780][INFO    ][3122] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 09:28:20.994761
2019-01-10 09:28:20,995 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2019-01-10 09:28:20,995 [salt.state       :300 ][INFO    ][3122] File /etc/apt/apt.conf.d/99proxies-salt is not present
2019-01-10 09:28:20,996 [salt.state       :1951][INFO    ][3122] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 09:28:20.996267 duration_in_ms=1.506
2019-01-10 09:28:20,996 [salt.state       :1780][INFO    ][3122] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 09:28:20.996731
2019-01-10 09:28:20,997 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2019-01-10 09:28:20,997 [salt.state       :300 ][INFO    ][3122] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2019-01-10 09:28:20,998 [salt.state       :1951][INFO    ][3122] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 09:28:20.998122 duration_in_ms=1.391
2019-01-10 09:28:20,998 [salt.state       :1780][INFO    ][3122] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 09:28:20.998572
2019-01-10 09:28:20,999 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2019-01-10 09:28:21,015 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2019-01-10 09:28:21,124 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:21,125 [salt.state       :1951][INFO    ][3122] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 09:28:21.125339 duration_in_ms=126.766
2019-01-10 09:28:21,128 [salt.state       :1780][INFO    ][3122] Running state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 09:28:21.128554
2019-01-10 09:28:21,129 [salt.state       :1813][INFO    ][3122] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main]
2019-01-10 09:28:21,353 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-rocky/xenial/archive-openstack-rocky.key'] in directory '/root'
2019-01-10 09:28:21,552 [salt.state       :300 ][INFO    ][3122] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main'}
2019-01-10 09:28:21,553 [salt.state       :1951][INFO    ][3122] Completed state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 09:28:21.553675 duration_in_ms=425.116
2019-01-10 09:28:21,554 [salt.state       :1780][INFO    ][3122] Running state [pkg.refresh_db] at time 09:28:21.554327
2019-01-10 09:28:21,554 [salt.state       :1813][INFO    ][3122] Executing state module.run for [pkg.refresh_db]
2019-01-10 09:28:21,555 [salt.utils.decorators:613 ][WARNING ][3122] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-10 09:28:21,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 09:28:24,793 [salt.state       :300 ][INFO    ][3122] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial InRelease': True, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial/main amd64 Packages': True}}
2019-01-10 09:28:24,795 [salt.state       :1951][INFO    ][3122] Completed state [pkg.refresh_db] at time 09:28:24.795887 duration_in_ms=3241.558
2019-01-10 09:28:24,796 [salt.state       :1780][INFO    ][3122] Running state [linux_extra_packages_removed] at time 09:28:24.796553
2019-01-10 09:28:24,797 [salt.state       :1813][INFO    ][3122] Executing state pkg.removed for [linux_extra_packages_removed]
2019-01-10 09:28:24,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2019-01-10 09:28:26,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:28:26,341 [salt.state       :300 ][INFO    ][3122] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2019-01-10 09:28:26,364 [salt.state       :915 ][INFO    ][3122] Loading fresh modules for state activity
2019-01-10 09:28:26,402 [salt.state       :1951][INFO    ][3122] Completed state [linux_extra_packages_removed] at time 09:28:26.402038 duration_in_ms=1605.485
2019-01-10 09:28:26,407 [salt.state       :1780][INFO    ][3122] Running state [linux_extra_packages_latest] at time 09:28:26.407457
2019-01-10 09:28:26,407 [salt.state       :1813][INFO    ][3122] Executing state pkg.latest for [linux_extra_packages_latest]
2019-01-10 09:28:27,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2019-01-10 09:28:27,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:28:27,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2019-01-10 09:28:29,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:28:29,243 [salt.state       :300 ][INFO    ][3122] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2019-01-10 09:28:29,265 [salt.state       :915 ][INFO    ][3122] Loading fresh modules for state activity
2019-01-10 09:28:29,302 [salt.state       :1951][INFO    ][3122] Completed state [linux_extra_packages_latest] at time 09:28:29.302222 duration_in_ms=2894.764
2019-01-10 09:28:29,306 [salt.state       :1780][INFO    ][3122] Running state [UTC] at time 09:28:29.306467
2019-01-10 09:28:29,306 [salt.state       :1813][INFO    ][3122] Executing state timezone.system for [UTC]
2019-01-10 09:28:29,310 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['timedatectl'] in directory '/root'
2019-01-10 09:28:29,349 [salt.state       :300 ][INFO    ][3122] Timezone UTC already set, UTC already set to UTC
2019-01-10 09:28:29,350 [salt.state       :1951][INFO    ][3122] Completed state [UTC] at time 09:28:29.350299 duration_in_ms=43.832
2019-01-10 09:28:29,353 [salt.state       :1780][INFO    ][3122] Running state [/etc/default/grub.d] at time 09:28:29.353328
2019-01-10 09:28:29,353 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/default/grub.d]
2019-01-10 09:28:29,359 [salt.state       :300 ][INFO    ][3122] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2019-01-10 09:28:29,359 [salt.state       :1951][INFO    ][3122] Completed state [/etc/default/grub.d] at time 09:28:29.359639 duration_in_ms=6.311
2019-01-10 09:28:29,360 [salt.state       :1780][INFO    ][3122] Running state [update-grub] at time 09:28:29.360533
2019-01-10 09:28:29,360 [salt.state       :1813][INFO    ][3122] Executing state cmd.wait for [update-grub]
2019-01-10 09:28:29,361 [salt.state       :300 ][INFO    ][3122] No changes made for update-grub
2019-01-10 09:28:29,361 [salt.state       :1951][INFO    ][3122] Completed state [update-grub] at time 09:28:29.361834 duration_in_ms=1.301
2019-01-10 09:28:29,363 [salt.state       :1780][INFO    ][3122] Running state [/boot/grub/grub.cfg] at time 09:28:29.363904
2019-01-10 09:28:29,364 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/boot/grub/grub.cfg]
2019-01-10 09:28:29,888 [salt.minion      :1308][INFO    ][3030] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110092829878023
2019-01-10 09:28:29,910 [salt.minion      :1432][INFO    ][4120] Starting a new job with PID 4120
2019-01-10 09:28:29,929 [salt.minion      :1711][INFO    ][4120] Returning information for job: 20190110092829878023
2019-01-10 09:28:30,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2019-01-10 09:28:30,233 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:30,235 [salt.state       :300 ][INFO    ][3122] {'mode': '0400'}
2019-01-10 09:28:30,235 [salt.state       :1951][INFO    ][3122] Completed state [/boot/grub/grub.cfg] at time 09:28:30.235391 duration_in_ms=871.484
2019-01-10 09:28:30,235 [salt.state       :1780][INFO    ][3122] Running state [nf_conntrack] at time 09:28:30.235951
2019-01-10 09:28:30,236 [salt.state       :1813][INFO    ][3122] Executing state kmod.present for [nf_conntrack]
2019-01-10 09:28:30,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'lsmod' in directory '/root'
2019-01-10 09:28:30,546 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'lsmod' in directory '/root'
2019-01-10 09:28:30,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'modprobe nf_conntrack' in directory '/root'
2019-01-10 09:28:30,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'lsmod' in directory '/root'
2019-01-10 09:28:30,672 [salt.state       :300 ][INFO    ][3122] {'nf_conntrack': 'loaded'}
2019-01-10 09:28:30,673 [salt.state       :1951][INFO    ][3122] Completed state [nf_conntrack] at time 09:28:30.673627 duration_in_ms=437.675
2019-01-10 09:28:30,674 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d] at time 09:28:30.674226
2019-01-10 09:28:30,674 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/modprobe.d]
2019-01-10 09:28:30,675 [salt.state       :300 ][INFO    ][3122] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2019-01-10 09:28:30,676 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d] at time 09:28:30.676452 duration_in_ms=2.226
2019-01-10 09:28:30,678 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/hfsplus.conf] at time 09:28:30.678711
2019-01-10 09:28:30,679 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2019-01-10 09:28:30,694 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2019-01-10 09:28:30,823 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:30,824 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/hfsplus.conf] at time 09:28:30.824732 duration_in_ms=146.02
2019-01-10 09:28:30,826 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/rds.conf] at time 09:28:30.826464
2019-01-10 09:28:30,827 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2019-01-10 09:28:31,611 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:31,611 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/rds.conf] at time 09:28:31.611861 duration_in_ms=785.396
2019-01-10 09:28:31,613 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/cramfs.conf] at time 09:28:31.613460
2019-01-10 09:28:31,613 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2019-01-10 09:28:31,749 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:31,750 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/cramfs.conf] at time 09:28:31.750600 duration_in_ms=137.139
2019-01-10 09:28:31,752 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/freevxfs.conf] at time 09:28:31.752262
2019-01-10 09:28:31,752 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2019-01-10 09:28:31,885 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:31,885 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/freevxfs.conf] at time 09:28:31.885910 duration_in_ms=133.648
2019-01-10 09:28:31,887 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/hfs.conf] at time 09:28:31.887525
2019-01-10 09:28:31,888 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2019-01-10 09:28:32,016 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,017 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/hfs.conf] at time 09:28:32.017201 duration_in_ms=129.675
2019-01-10 09:28:32,018 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/squashfs.conf] at time 09:28:32.018803
2019-01-10 09:28:32,019 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2019-01-10 09:28:32,165 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,166 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/squashfs.conf] at time 09:28:32.166584 duration_in_ms=147.78
2019-01-10 09:28:32,168 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/udf.conf] at time 09:28:32.168542
2019-01-10 09:28:32,169 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2019-01-10 09:28:32,301 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,302 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/udf.conf] at time 09:28:32.302526 duration_in_ms=133.984
2019-01-10 09:28:32,304 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/vfat.conf] at time 09:28:32.304238
2019-01-10 09:28:32,304 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2019-01-10 09:28:32,436 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,437 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/vfat.conf] at time 09:28:32.437614 duration_in_ms=133.376
2019-01-10 09:28:32,439 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/sctp.conf] at time 09:28:32.439367
2019-01-10 09:28:32,439 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2019-01-10 09:28:32,567 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,568 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/sctp.conf] at time 09:28:32.568561 duration_in_ms=129.193
2019-01-10 09:28:32,570 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/jffs2.conf] at time 09:28:32.570242
2019-01-10 09:28:32,570 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2019-01-10 09:28:32,702 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,703 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/jffs2.conf] at time 09:28:32.703132 duration_in_ms=132.89
2019-01-10 09:28:32,704 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/tipc.conf] at time 09:28:32.704813
2019-01-10 09:28:32,705 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2019-01-10 09:28:32,831 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,831 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/tipc.conf] at time 09:28:32.831869 duration_in_ms=127.055
2019-01-10 09:28:32,833 [salt.state       :1780][INFO    ][3122] Running state [/etc/modprobe.d/dccp.conf] at time 09:28:32.833297
2019-01-10 09:28:32,833 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2019-01-10 09:28:32,963 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:32,964 [salt.state       :1951][INFO    ][3122] Completed state [/etc/modprobe.d/dccp.conf] at time 09:28:32.964445 duration_in_ms=131.147
2019-01-10 09:28:32,964 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_congestion_control] at time 09:28:32.964906
2019-01-10 09:28:32,965 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2019-01-10 09:28:32,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2019-01-10 09:28:32,987 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_congestion_control': 'yeah'}
2019-01-10 09:28:32,987 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_congestion_control] at time 09:28:32.987911 duration_in_ms=23.004
2019-01-10 09:28:32,988 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_slow_start_after_idle] at time 09:28:32.988499
2019-01-10 09:28:32,989 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2019-01-10 09:28:32,990 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2019-01-10 09:28:33,001 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_slow_start_after_idle': 0}
2019-01-10 09:28:33,002 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 09:28:33.002476 duration_in_ms=13.977
2019-01-10 09:28:33,003 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 09:28:33.003019
2019-01-10 09:28:33,003 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2019-01-10 09:28:33,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2019-01-10 09:28:33,015 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2019-01-10 09:28:33,015 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 09:28:33.015752 duration_in_ms=12.733
2019-01-10 09:28:33,016 [salt.state       :1780][INFO    ][3122] Running state [net.nf_conntrack_max] at time 09:28:33.016295
2019-01-10 09:28:33,016 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.nf_conntrack_max]
2019-01-10 09:28:33,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2019-01-10 09:28:33,029 [salt.state       :300 ][INFO    ][3122] {'net.nf_conntrack_max': 1048576}
2019-01-10 09:28:33,029 [salt.state       :1951][INFO    ][3122] Completed state [net.nf_conntrack_max] at time 09:28:33.029767 duration_in_ms=13.472
2019-01-10 09:28:33,030 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 09:28:33.030359
2019-01-10 09:28:33,030 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2019-01-10 09:28:33,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2019-01-10 09:28:33,043 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2019-01-10 09:28:33,044 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 09:28:33.044208 duration_in_ms=13.849
2019-01-10 09:28:33,044 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.default.log_martians] at time 09:28:33.044778
2019-01-10 09:28:33,045 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2019-01-10 09:28:33,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2019-01-10 09:28:33,058 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.default.log_martians': 1}
2019-01-10 09:28:33,058 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.default.log_martians] at time 09:28:33.058787 duration_in_ms=14.009
2019-01-10 09:28:33,059 [salt.state       :1780][INFO    ][3122] Running state [net.core.somaxconn] at time 09:28:33.059398
2019-01-10 09:28:33,060 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.core.somaxconn]
2019-01-10 09:28:33,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2019-01-10 09:28:33,073 [salt.state       :300 ][INFO    ][3122] {'net.core.somaxconn': 4096}
2019-01-10 09:28:33,073 [salt.state       :1951][INFO    ][3122] Completed state [net.core.somaxconn] at time 09:28:33.073812 duration_in_ms=14.414
2019-01-10 09:28:33,074 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.all.send_redirects] at time 09:28:33.074414
2019-01-10 09:28:33,074 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2019-01-10 09:28:33,076 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2019-01-10 09:28:33,088 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.all.send_redirects': 0}
2019-01-10 09:28:33,088 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.all.send_redirects] at time 09:28:33.088920 duration_in_ms=14.506
2019-01-10 09:28:33,089 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_tw_reuse] at time 09:28:33.089515
2019-01-10 09:28:33,090 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2019-01-10 09:28:33,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2019-01-10 09:28:33,103 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_tw_reuse': 1}
2019-01-10 09:28:33,104 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_tw_reuse] at time 09:28:33.104329 duration_in_ms=14.813
2019-01-10 09:28:33,104 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.default.rp_filter] at time 09:28:33.104925
2019-01-10 09:28:33,105 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2019-01-10 09:28:33,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2019-01-10 09:28:33,119 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.default.rp_filter': 1}
2019-01-10 09:28:33,120 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.default.rp_filter] at time 09:28:33.119972 duration_in_ms=15.047
2019-01-10 09:28:33,120 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_fin_timeout] at time 09:28:33.120586
2019-01-10 09:28:33,121 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2019-01-10 09:28:33,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2019-01-10 09:28:33,134 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_fin_timeout': 30}
2019-01-10 09:28:33,135 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_fin_timeout] at time 09:28:33.135442 duration_in_ms=14.856
2019-01-10 09:28:33,136 [salt.state       :1780][INFO    ][3122] Running state [kernel.panic] at time 09:28:33.136055
2019-01-10 09:28:33,136 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [kernel.panic]
2019-01-10 09:28:33,137 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2019-01-10 09:28:33,149 [salt.state       :300 ][INFO    ][3122] {'kernel.panic': 60}
2019-01-10 09:28:33,150 [salt.state       :1951][INFO    ][3122] Completed state [kernel.panic] at time 09:28:33.149987 duration_in_ms=13.932
2019-01-10 09:28:33,150 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_keepalive_probes] at time 09:28:33.150580
2019-01-10 09:28:33,151 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2019-01-10 09:28:33,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2019-01-10 09:28:33,164 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_keepalive_probes': 8}
2019-01-10 09:28:33,165 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_keepalive_probes] at time 09:28:33.165592 duration_in_ms=15.012
2019-01-10 09:28:33,166 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.all.log_martians] at time 09:28:33.166230
2019-01-10 09:28:33,166 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2019-01-10 09:28:33,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2019-01-10 09:28:33,181 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.all.log_martians': 1}
2019-01-10 09:28:33,182 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.all.log_martians] at time 09:28:33.182243 duration_in_ms=16.013
2019-01-10 09:28:33,182 [salt.state       :1780][INFO    ][3122] Running state [fs.suid_dumpable] at time 09:28:33.182855
2019-01-10 09:28:33,183 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [fs.suid_dumpable]
2019-01-10 09:28:33,184 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2019-01-10 09:28:33,197 [salt.state       :300 ][INFO    ][3122] {'fs.suid_dumpable': 0}
2019-01-10 09:28:33,198 [salt.state       :1951][INFO    ][3122] Completed state [fs.suid_dumpable] at time 09:28:33.198648 duration_in_ms=15.793
2019-01-10 09:28:33,199 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.default.accept_redirects] at time 09:28:33.199333
2019-01-10 09:28:33,199 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2019-01-10 09:28:33,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2019-01-10 09:28:33,213 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.default.accept_redirects': 0}
2019-01-10 09:28:33,214 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.default.accept_redirects] at time 09:28:33.214525 duration_in_ms=15.191
2019-01-10 09:28:33,215 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.default.secure_redirects] at time 09:28:33.215120
2019-01-10 09:28:33,215 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2019-01-10 09:28:33,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2019-01-10 09:28:33,229 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.default.secure_redirects': 0}
2019-01-10 09:28:33,229 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.default.secure_redirects] at time 09:28:33.229829 duration_in_ms=14.709
2019-01-10 09:28:33,230 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.default.accept_source_route] at time 09:28:33.230425
2019-01-10 09:28:33,231 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2019-01-10 09:28:33,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2019-01-10 09:28:33,244 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.default.accept_source_route': 0}
2019-01-10 09:28:33,245 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.default.accept_source_route] at time 09:28:33.245199 duration_in_ms=14.774
2019-01-10 09:28:33,245 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_keepalive_intvl] at time 09:28:33.245851
2019-01-10 09:28:33,246 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2019-01-10 09:28:33,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2019-01-10 09:28:33,260 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_keepalive_intvl': 3}
2019-01-10 09:28:33,260 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_keepalive_intvl] at time 09:28:33.260758 duration_in_ms=14.907
2019-01-10 09:28:33,261 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_keepalive_time] at time 09:28:33.261340
2019-01-10 09:28:33,261 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2019-01-10 09:28:33,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2019-01-10 09:28:33,274 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_keepalive_time': 30}
2019-01-10 09:28:33,275 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_keepalive_time] at time 09:28:33.275491 duration_in_ms=14.151
2019-01-10 09:28:33,276 [salt.state       :1780][INFO    ][3122] Running state [kernel.randomize_va_space] at time 09:28:33.276095
2019-01-10 09:28:33,276 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [kernel.randomize_va_space]
2019-01-10 09:28:33,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2019-01-10 09:28:33,289 [salt.state       :300 ][INFO    ][3122] {'kernel.randomize_va_space': 2}
2019-01-10 09:28:33,289 [salt.state       :1951][INFO    ][3122] Completed state [kernel.randomize_va_space] at time 09:28:33.289585 duration_in_ms=13.49
2019-01-10 09:28:33,290 [salt.state       :1780][INFO    ][3122] Running state [fs.file-max] at time 09:28:33.290162
2019-01-10 09:28:33,290 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [fs.file-max]
2019-01-10 09:28:33,291 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2019-01-10 09:28:33,302 [salt.state       :300 ][INFO    ][3122] {'fs.file-max': 124165}
2019-01-10 09:28:33,303 [salt.state       :1951][INFO    ][3122] Completed state [fs.file-max] at time 09:28:33.303208 duration_in_ms=13.046
2019-01-10 09:28:33,303 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_syncookies] at time 09:28:33.303743
2019-01-10 09:28:33,304 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2019-01-10 09:28:33,305 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2019-01-10 09:28:33,316 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_syncookies': 1}
2019-01-10 09:28:33,317 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_syncookies] at time 09:28:33.317290 duration_in_ms=13.547
2019-01-10 09:28:33,317 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_max_syn_backlog] at time 09:28:33.317923
2019-01-10 09:28:33,318 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2019-01-10 09:28:33,319 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2019-01-10 09:28:33,331 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_max_syn_backlog': 8192}
2019-01-10 09:28:33,332 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_max_syn_backlog] at time 09:28:33.332228 duration_in_ms=14.305
2019-01-10 09:28:33,332 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.all.rp_filter] at time 09:28:33.332795
2019-01-10 09:28:33,333 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2019-01-10 09:28:33,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2019-01-10 09:28:33,345 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.all.rp_filter': 1}
2019-01-10 09:28:33,345 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.all.rp_filter] at time 09:28:33.345783 duration_in_ms=12.988
2019-01-10 09:28:33,346 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.all.accept_source_route] at time 09:28:33.346335
2019-01-10 09:28:33,346 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2019-01-10 09:28:33,348 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2019-01-10 09:28:33,359 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.all.accept_source_route': 0}
2019-01-10 09:28:33,360 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.all.accept_source_route] at time 09:28:33.360071 duration_in_ms=13.736
2019-01-10 09:28:33,360 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.tcp_retries2] at time 09:28:33.360698
2019-01-10 09:28:33,361 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2019-01-10 09:28:33,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2019-01-10 09:28:33,373 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.tcp_retries2': 5}
2019-01-10 09:28:33,374 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.tcp_retries2] at time 09:28:33.374346 duration_in_ms=13.648
2019-01-10 09:28:33,374 [salt.state       :1780][INFO    ][3122] Running state [net.core.netdev_max_backlog] at time 09:28:33.374940
2019-01-10 09:28:33,375 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.core.netdev_max_backlog]
2019-01-10 09:28:33,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2019-01-10 09:28:33,387 [salt.state       :300 ][INFO    ][3122] {'net.core.netdev_max_backlog': 261144}
2019-01-10 09:28:33,389 [salt.state       :1951][INFO    ][3122] Completed state [net.core.netdev_max_backlog] at time 09:28:33.389061 duration_in_ms=14.121
2019-01-10 09:28:33,389 [salt.state       :1780][INFO    ][3122] Running state [vm.swappiness] at time 09:28:33.389775
2019-01-10 09:28:33,390 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [vm.swappiness]
2019-01-10 09:28:33,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2019-01-10 09:28:33,402 [salt.state       :300 ][INFO    ][3122] {'vm.swappiness': 10}
2019-01-10 09:28:33,403 [salt.state       :1951][INFO    ][3122] Completed state [vm.swappiness] at time 09:28:33.403089 duration_in_ms=13.314
2019-01-10 09:28:33,403 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.all.secure_redirects] at time 09:28:33.403679
2019-01-10 09:28:33,404 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2019-01-10 09:28:33,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2019-01-10 09:28:33,416 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.all.secure_redirects': 0}
2019-01-10 09:28:33,417 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.all.secure_redirects] at time 09:28:33.417163 duration_in_ms=13.484
2019-01-10 09:28:33,417 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.neigh.default.gc_thresh1] at time 09:28:33.417759
2019-01-10 09:28:33,418 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2019-01-10 09:28:33,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2019-01-10 09:28:33,430 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2019-01-10 09:28:33,431 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 09:28:33.431293 duration_in_ms=13.534
2019-01-10 09:28:33,431 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.neigh.default.gc_thresh2] at time 09:28:33.431873
2019-01-10 09:28:33,432 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2019-01-10 09:28:33,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2019-01-10 09:28:33,444 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2019-01-10 09:28:33,445 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 09:28:33.445361 duration_in_ms=13.487
2019-01-10 09:28:33,446 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.neigh.default.gc_thresh3] at time 09:28:33.445982
2019-01-10 09:28:33,446 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2019-01-10 09:28:33,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2019-01-10 09:28:33,459 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2019-01-10 09:28:33,460 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 09:28:33.460199 duration_in_ms=14.216
2019-01-10 09:28:33,460 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.default.send_redirects] at time 09:28:33.460787
2019-01-10 09:28:33,461 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2019-01-10 09:28:33,462 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2019-01-10 09:28:33,475 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.default.send_redirects': 0}
2019-01-10 09:28:33,475 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.default.send_redirects] at time 09:28:33.475806 duration_in_ms=15.019
2019-01-10 09:28:33,476 [salt.state       :1780][INFO    ][3122] Running state [net.ipv4.conf.all.accept_redirects] at time 09:28:33.476416
2019-01-10 09:28:33,476 [salt.state       :1813][INFO    ][3122] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2019-01-10 09:28:33,478 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2019-01-10 09:28:33,490 [salt.state       :300 ][INFO    ][3122] {'net.ipv4.conf.all.accept_redirects': 0}
2019-01-10 09:28:33,490 [salt.state       :1951][INFO    ][3122] Completed state [net.ipv4.conf.all.accept_redirects] at time 09:28:33.490731 duration_in_ms=14.315
2019-01-10 09:28:33,491 [salt.state       :1780][INFO    ][3122] Running state [linux_sysfs_package] at time 09:28:33.491319
2019-01-10 09:28:33,491 [salt.state       :1813][INFO    ][3122] Executing state pkg.installed for [linux_sysfs_package]
2019-01-10 09:28:33,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2019-01-10 09:28:33,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 09:28:35,187 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:28:35,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2019-01-10 09:28:37,892 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:28:37,931 [salt.state       :300 ][INFO    ][3122] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2019-01-10 09:28:37,953 [salt.state       :915 ][INFO    ][3122] Loading fresh modules for state activity
2019-01-10 09:28:37,994 [salt.state       :1951][INFO    ][3122] Completed state [linux_sysfs_package] at time 09:28:37.993944 duration_in_ms=4502.624
2019-01-10 09:28:37,999 [salt.state       :1780][INFO    ][3122] Running state [/etc/sysfs.d] at time 09:28:37.999940
2019-01-10 09:28:38,000 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/etc/sysfs.d]
2019-01-10 09:28:38,004 [salt.state       :300 ][INFO    ][3122] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2019-01-10 09:28:38,005 [salt.state       :1951][INFO    ][3122] Completed state [/etc/sysfs.d] at time 09:28:38.005320 duration_in_ms=5.38
2019-01-10 09:28:38,007 [salt.state       :1780][INFO    ][3122] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 09:28:38.007012
2019-01-10 09:28:38,007 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2019-01-10 09:28:38,028 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/sysfs.conf'
2019-01-10 09:28:38,045 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:38,046 [salt.state       :1951][INFO    ][3122] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 09:28:38.046611 duration_in_ms=39.599
2019-01-10 09:28:38,047 [salt.state       :1780][INFO    ][3122] Running state [sysfs.write] at time 09:28:38.047770
2019-01-10 09:28:38,048 [salt.state       :1813][INFO    ][3122] Executing state module.run for [sysfs.write]
2019-01-10 09:28:38,048 [salt.utils.decorators:613 ][WARNING ][3122] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-10 09:28:38,051 [salt.state       :300 ][INFO    ][3122] {'ret': True}
2019-01-10 09:28:38,051 [salt.state       :1951][INFO    ][3122] Completed state [sysfs.write] at time 09:28:38.051808 duration_in_ms=4.038
2019-01-10 09:28:38,532 [salt.state       :1780][INFO    ][3122] Running state [ondemand] at time 09:28:38.532154
2019-01-10 09:28:38,533 [salt.state       :1813][INFO    ][3122] Executing state service.dead for [ondemand]
2019-01-10 09:28:38,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2019-01-10 09:28:38,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-01-10 09:28:38,564 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-10 09:28:38,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2019-01-10 09:28:38,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2019-01-10 09:28:38,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-10 09:28:38,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-10 09:28:38,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2019-01-10 09:28:38,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2019-01-10 09:28:38,858 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'runlevel' in directory '/root'
2019-01-10 09:28:38,871 [salt.state       :300 ][INFO    ][3122] {'ondemand': True}
2019-01-10 09:28:38,872 [salt.state       :1951][INFO    ][3122] Completed state [ondemand] at time 09:28:38.872276 duration_in_ms=340.121
2019-01-10 09:28:38,873 [salt.state       :1780][INFO    ][3122] Running state [en_US.UTF-8] at time 09:28:38.873467
2019-01-10 09:28:38,873 [salt.state       :1813][INFO    ][3122] Executing state locale.present for [en_US.UTF-8]
2019-01-10 09:28:38,874 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'locale -a' in directory '/root'
2019-01-10 09:28:38,886 [salt.state       :300 ][INFO    ][3122] Locale en_US.UTF-8 is already present
2019-01-10 09:28:38,886 [salt.state       :1951][INFO    ][3122] Completed state [en_US.UTF-8] at time 09:28:38.886725 duration_in_ms=13.256
2019-01-10 09:28:38,889 [salt.state       :1780][INFO    ][3122] Running state [en_US.UTF-8] at time 09:28:38.889350
2019-01-10 09:28:38,889 [salt.state       :1813][INFO    ][3122] Executing state locale.system for [en_US.UTF-8]
2019-01-10 09:28:38,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'localectl' in directory '/root'
2019-01-10 09:28:38,930 [salt.state       :300 ][INFO    ][3122] System locale en_US.UTF-8 already set
2019-01-10 09:28:38,930 [salt.state       :1951][INFO    ][3122] Completed state [en_US.UTF-8] at time 09:28:38.930459 duration_in_ms=41.108
2019-01-10 09:28:38,931 [salt.state       :1780][INFO    ][3122] Running state [root] at time 09:28:38.931750
2019-01-10 09:28:38,932 [salt.state       :1813][INFO    ][3122] Executing state group.present for [root]
2019-01-10 09:28:38,932 [salt.state       :300 ][INFO    ][3122] Group root is present and up to date
2019-01-10 09:28:38,932 [salt.state       :1951][INFO    ][3122] Completed state [root] at time 09:28:38.932751 duration_in_ms=1.001
2019-01-10 09:28:38,936 [salt.state       :1780][INFO    ][3122] Running state [root] at time 09:28:38.936562
2019-01-10 09:28:38,938 [salt.state       :1813][INFO    ][3122] Executing state user.present for [root]
2019-01-10 09:28:38,943 [salt.state       :300 ][INFO    ][3122] User root is present and up to date
2019-01-10 09:28:38,943 [salt.state       :1951][INFO    ][3122] Completed state [root] at time 09:28:38.943624 duration_in_ms=7.062
2019-01-10 09:28:38,945 [salt.state       :1780][INFO    ][3122] Running state [/root] at time 09:28:38.945128
2019-01-10 09:28:38,945 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/root]
2019-01-10 09:28:38,946 [salt.state       :300 ][INFO    ][3122] Directory /root is in the correct state
Directory /root updated
2019-01-10 09:28:38,946 [salt.state       :1951][INFO    ][3122] Completed state [/root] at time 09:28:38.946574 duration_in_ms=1.446
2019-01-10 09:28:38,946 [salt.state       :1780][INFO    ][3122] Running state [/etc/sudoers.d/90-salt-user-root] at time 09:28:38.946789
2019-01-10 09:28:38,947 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2019-01-10 09:28:38,947 [salt.state       :300 ][INFO    ][3122] File /etc/sudoers.d/90-salt-user-root is not present
2019-01-10 09:28:38,947 [salt.state       :1951][INFO    ][3122] Completed state [/etc/sudoers.d/90-salt-user-root] at time 09:28:38.947507 duration_in_ms=0.717
2019-01-10 09:28:38,947 [salt.state       :1780][INFO    ][3122] Running state [ubuntu] at time 09:28:38.947717
2019-01-10 09:28:38,947 [salt.state       :1813][INFO    ][3122] Executing state group.present for [ubuntu]
2019-01-10 09:28:38,948 [salt.state       :300 ][INFO    ][3122] Group ubuntu is present and up to date
2019-01-10 09:28:38,948 [salt.state       :1951][INFO    ][3122] Completed state [ubuntu] at time 09:28:38.948439 duration_in_ms=0.723
2019-01-10 09:28:38,949 [salt.state       :1780][INFO    ][3122] Running state [ubuntu] at time 09:28:38.949642
2019-01-10 09:28:38,949 [salt.state       :1813][INFO    ][3122] Executing state user.present for [ubuntu]
2019-01-10 09:28:38,953 [salt.state       :300 ][INFO    ][3122] {'passwd': 'XXX-REDACTED-XXX'}
2019-01-10 09:28:38,953 [salt.state       :1951][INFO    ][3122] Completed state [ubuntu] at time 09:28:38.953388 duration_in_ms=3.746
2019-01-10 09:28:38,954 [salt.state       :1780][INFO    ][3122] Running state [/home/ubuntu] at time 09:28:38.954892
2019-01-10 09:28:38,955 [salt.state       :1813][INFO    ][3122] Executing state file.directory for [/home/ubuntu]
2019-01-10 09:28:38,956 [salt.state       :300 ][INFO    ][3122] {'mode': '0700'}
2019-01-10 09:28:38,956 [salt.state       :1951][INFO    ][3122] Completed state [/home/ubuntu] at time 09:28:38.956344 duration_in_ms=1.452
2019-01-10 09:28:38,957 [salt.state       :1780][INFO    ][3122] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 09:28:38.957581
2019-01-10 09:28:38,957 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2019-01-10 09:28:38,973 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2019-01-10 09:28:38,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.CjjAi8' in directory '/root'
2019-01-10 09:28:39,004 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:39,005 [salt.state       :1951][INFO    ][3122] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 09:28:39.005337 duration_in_ms=47.755
2019-01-10 09:28:39,005 [salt.state       :1780][INFO    ][3122] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 09:28:39.005771
2019-01-10 09:28:39,006 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2019-01-10 09:28:39,025 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2019-01-10 09:28:39,135 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:39,135 [salt.state       :1951][INFO    ][3122] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 09:28:39.135931 duration_in_ms=130.159
2019-01-10 09:28:39,136 [salt.state       :1780][INFO    ][3122] Running state [/etc/security/limits.d/90-salt-default.conf] at time 09:28:39.136214
2019-01-10 09:28:39,136 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2019-01-10 09:28:39,250 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:39,250 [salt.state       :1951][INFO    ][3122] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 09:28:39.250283 duration_in_ms=114.069
2019-01-10 09:28:39,250 [salt.state       :1780][INFO    ][3122] Running state [autofs] at time 09:28:39.250527
2019-01-10 09:28:39,250 [salt.state       :1813][INFO    ][3122] Executing state service.disabled for [autofs]
2019-01-10 09:28:39,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2019-01-10 09:28:39,268 [salt.state       :300 ][INFO    ][3122] The named service autofs is not available
2019-01-10 09:28:39,268 [salt.state       :1951][INFO    ][3122] Completed state [autofs] at time 09:28:39.268721 duration_in_ms=18.194
2019-01-10 09:28:39,269 [salt.state       :1780][INFO    ][3122] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 09:28:39.269363
2019-01-10 09:28:39,269 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2019-01-10 09:28:39,286 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2019-01-10 09:28:39,388 [salt.state       :300 ][INFO    ][3122] File changed:
New file
2019-01-10 09:28:39,389 [salt.state       :1951][INFO    ][3122] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 09:28:39.389198 duration_in_ms=119.833
2019-01-10 09:28:39,391 [salt.state       :1780][INFO    ][3122] Running state [service.systemctl_reload] at time 09:28:39.391490
2019-01-10 09:28:39,391 [salt.state       :1813][INFO    ][3122] Executing state module.wait for [service.systemctl_reload]
2019-01-10 09:28:39,392 [salt.state       :300 ][INFO    ][3122] No changes made for service.systemctl_reload
2019-01-10 09:28:39,392 [salt.state       :1951][INFO    ][3122] Completed state [service.systemctl_reload] at time 09:28:39.392303 duration_in_ms=0.813
2019-01-10 09:28:39,392 [salt.state       :1780][INFO    ][3122] Running state [service.systemctl_reload] at time 09:28:39.392501
2019-01-10 09:28:39,392 [salt.state       :1813][INFO    ][3122] Executing state module.mod_watch for [service.systemctl_reload]
2019-01-10 09:28:39,393 [salt.utils.decorators:613 ][WARNING ][3122] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2019-01-10 09:28:39,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2019-01-10 09:28:39,512 [salt.state       :300 ][INFO    ][3122] {'ret': True}
2019-01-10 09:28:39,513 [salt.state       :1951][INFO    ][3122] Completed state [service.systemctl_reload] at time 09:28:39.513422 duration_in_ms=120.92
2019-01-10 09:28:39,514 [salt.state       :1780][INFO    ][3122] Running state [/etc/shadow] at time 09:28:39.514198
2019-01-10 09:28:39,514 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/shadow]
2019-01-10 09:28:39,515 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,516 [salt.state       :300 ][INFO    ][3122] File /etc/shadow exists with proper permissions. No changes made.
2019-01-10 09:28:39,517 [salt.state       :1951][INFO    ][3122] Completed state [/etc/shadow] at time 09:28:39.517169 duration_in_ms=2.971
2019-01-10 09:28:39,517 [salt.state       :1780][INFO    ][3122] Running state [/etc/gshadow] at time 09:28:39.517683
2019-01-10 09:28:39,518 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/gshadow]
2019-01-10 09:28:39,518 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,519 [salt.state       :300 ][INFO    ][3122] File /etc/gshadow exists with proper permissions. No changes made.
2019-01-10 09:28:39,520 [salt.state       :1951][INFO    ][3122] Completed state [/etc/gshadow] at time 09:28:39.520165 duration_in_ms=2.482
2019-01-10 09:28:39,520 [salt.state       :1780][INFO    ][3122] Running state [/etc/group-] at time 09:28:39.520651
2019-01-10 09:28:39,521 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/group-]
2019-01-10 09:28:39,521 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,522 [salt.state       :300 ][INFO    ][3122] File /etc/group- exists with proper permissions. No changes made.
2019-01-10 09:28:39,523 [salt.state       :1951][INFO    ][3122] Completed state [/etc/group-] at time 09:28:39.522990 duration_in_ms=2.339
2019-01-10 09:28:39,523 [salt.state       :1780][INFO    ][3122] Running state [/etc/shadow-] at time 09:28:39.523448
2019-01-10 09:28:39,523 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/shadow-]
2019-01-10 09:28:39,524 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,525 [salt.state       :300 ][INFO    ][3122] File /etc/shadow- exists with proper permissions. No changes made.
2019-01-10 09:28:39,525 [salt.state       :1951][INFO    ][3122] Completed state [/etc/shadow-] at time 09:28:39.525742 duration_in_ms=2.295
2019-01-10 09:28:39,526 [salt.state       :1780][INFO    ][3122] Running state [/etc/passwd-] at time 09:28:39.526215
2019-01-10 09:28:39,526 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/passwd-]
2019-01-10 09:28:39,527 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,528 [salt.state       :300 ][INFO    ][3122] File /etc/passwd- exists with proper permissions. No changes made.
2019-01-10 09:28:39,528 [salt.state       :1951][INFO    ][3122] Completed state [/etc/passwd-] at time 09:28:39.528443 duration_in_ms=2.229
2019-01-10 09:28:39,528 [salt.state       :1780][INFO    ][3122] Running state [/etc/passwd] at time 09:28:39.528908
2019-01-10 09:28:39,529 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/passwd]
2019-01-10 09:28:39,529 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,530 [salt.state       :300 ][INFO    ][3122] File /etc/passwd exists with proper permissions. No changes made.
2019-01-10 09:28:39,531 [salt.state       :1951][INFO    ][3122] Completed state [/etc/passwd] at time 09:28:39.531167 duration_in_ms=2.259
2019-01-10 09:28:39,531 [salt.state       :1780][INFO    ][3122] Running state [/etc/gshadow-] at time 09:28:39.531620
2019-01-10 09:28:39,532 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/gshadow-]
2019-01-10 09:28:39,532 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,533 [salt.state       :300 ][INFO    ][3122] File /etc/gshadow- exists with proper permissions. No changes made.
2019-01-10 09:28:39,534 [salt.state       :1951][INFO    ][3122] Completed state [/etc/gshadow-] at time 09:28:39.533994 duration_in_ms=2.374
2019-01-10 09:28:39,535 [salt.state       :1780][INFO    ][3122] Running state [/etc/group] at time 09:28:39.534980
2019-01-10 09:28:39,535 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/group]
2019-01-10 09:28:39,536 [salt.loaded.int.states.file:2298][WARNING ][3122] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2019-01-10 09:28:39,536 [salt.state       :300 ][INFO    ][3122] File /etc/group exists with proper permissions. No changes made.
2019-01-10 09:28:39,537 [salt.state       :1951][INFO    ][3122] Completed state [/etc/group] at time 09:28:39.537249 duration_in_ms=2.269
2019-01-10 09:28:39,537 [salt.state       :1780][INFO    ][3122] Running state [/etc/issue] at time 09:28:39.537743
2019-01-10 09:28:39,538 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/issue]
2019-01-10 09:28:39,540 [salt.state       :300 ][INFO    ][3122] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2019-01-10 09:28:39,543 [salt.state       :1951][INFO    ][3122] Completed state [/etc/issue] at time 09:28:39.543697 duration_in_ms=5.953
2019-01-10 09:28:39,544 [salt.state       :1780][INFO    ][3122] Running state [/etc/hostname] at time 09:28:39.544145
2019-01-10 09:28:39,544 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/hostname]
2019-01-10 09:28:39,562 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2019-01-10 09:28:39,574 [salt.state       :300 ][INFO    ][3122] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb03

2019-01-10 09:28:39,575 [salt.state       :1951][INFO    ][3122] Completed state [/etc/hostname] at time 09:28:39.575358 duration_in_ms=31.212
2019-01-10 09:28:39,578 [salt.state       :1780][INFO    ][3122] Running state [hostname mdb03] at time 09:28:39.578706
2019-01-10 09:28:39,579 [salt.state       :1813][INFO    ][3122] Executing state cmd.run for [hostname mdb03]
2019-01-10 09:28:39,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'test "$(hostname)" = "mdb03"' in directory '/root'
2019-01-10 09:28:39,595 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'hostname mdb03' in directory '/root'
2019-01-10 09:28:39,607 [salt.state       :300 ][INFO    ][3122] {'pid': 5118, 'retcode': 0, 'stderr': '', 'stdout': ''}
2019-01-10 09:28:39,608 [salt.state       :1951][INFO    ][3122] Completed state [hostname mdb03] at time 09:28:39.608447 duration_in_ms=29.741
2019-01-10 09:28:39,610 [salt.state       :1780][INFO    ][3122] Running state [mdb02] at time 09:28:39.610408
2019-01-10 09:28:39,610 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb02]
2019-01-10 09:28:39,612 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb02'}
2019-01-10 09:28:39,613 [salt.state       :1951][INFO    ][3122] Completed state [mdb02] at time 09:28:39.612964 duration_in_ms=2.556
2019-01-10 09:28:39,613 [salt.state       :1780][INFO    ][3122] Running state [mdb02.mcp-odl-ha.local] at time 09:28:39.613532
2019-01-10 09:28:39,614 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb02.mcp-odl-ha.local]
2019-01-10 09:28:39,615 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb02.mcp-odl-ha.local'}
2019-01-10 09:28:39,615 [salt.state       :1951][INFO    ][3122] Completed state [mdb02.mcp-odl-ha.local] at time 09:28:39.615533 duration_in_ms=2.001
2019-01-10 09:28:39,616 [salt.state       :1780][INFO    ][3122] Running state [mdb03] at time 09:28:39.616143
2019-01-10 09:28:39,616 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb03]
2019-01-10 09:28:39,617 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb03'}
2019-01-10 09:28:39,618 [salt.state       :1951][INFO    ][3122] Completed state [mdb03] at time 09:28:39.617992 duration_in_ms=1.849
2019-01-10 09:28:39,618 [salt.state       :1780][INFO    ][3122] Running state [mdb03.mcp-odl-ha.local] at time 09:28:39.618501
2019-01-10 09:28:39,618 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb03.mcp-odl-ha.local]
2019-01-10 09:28:39,620 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb03.mcp-odl-ha.local'}
2019-01-10 09:28:39,620 [salt.state       :1951][INFO    ][3122] Completed state [mdb03.mcp-odl-ha.local] at time 09:28:39.620494 duration_in_ms=1.993
2019-01-10 09:28:39,621 [salt.state       :1780][INFO    ][3122] Running state [mdb01] at time 09:28:39.621042
2019-01-10 09:28:39,621 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb01]
2019-01-10 09:28:39,622 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb01'}
2019-01-10 09:28:39,623 [salt.state       :1951][INFO    ][3122] Completed state [mdb01] at time 09:28:39.623023 duration_in_ms=1.982
2019-01-10 09:28:39,623 [salt.state       :1780][INFO    ][3122] Running state [mdb01.mcp-odl-ha.local] at time 09:28:39.623566
2019-01-10 09:28:39,624 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb01.mcp-odl-ha.local]
2019-01-10 09:28:39,625 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb01.mcp-odl-ha.local'}
2019-01-10 09:28:39,625 [salt.state       :1951][INFO    ][3122] Completed state [mdb01.mcp-odl-ha.local] at time 09:28:39.625553 duration_in_ms=1.987
2019-01-10 09:28:39,626 [salt.state       :1780][INFO    ][3122] Running state [mdb] at time 09:28:39.626174
2019-01-10 09:28:39,626 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb]
2019-01-10 09:28:39,629 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb'}
2019-01-10 09:28:39,629 [salt.state       :1951][INFO    ][3122] Completed state [mdb] at time 09:28:39.629539 duration_in_ms=3.365
2019-01-10 09:28:39,630 [salt.state       :1780][INFO    ][3122] Running state [mdb.mcp-odl-ha.local] at time 09:28:39.630194
2019-01-10 09:28:39,630 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mdb.mcp-odl-ha.local]
2019-01-10 09:28:39,631 [salt.state       :300 ][INFO    ][3122] {'host': 'mdb.mcp-odl-ha.local'}
2019-01-10 09:28:39,632 [salt.state       :1951][INFO    ][3122] Completed state [mdb.mcp-odl-ha.local] at time 09:28:39.632113 duration_in_ms=1.92
2019-01-10 09:28:39,632 [salt.state       :1780][INFO    ][3122] Running state [cfg01] at time 09:28:39.632691
2019-01-10 09:28:39,633 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cfg01]
2019-01-10 09:28:39,634 [salt.state       :300 ][INFO    ][3122] {'host': 'cfg01'}
2019-01-10 09:28:39,634 [salt.state       :1951][INFO    ][3122] Completed state [cfg01] at time 09:28:39.634716 duration_in_ms=2.026
2019-01-10 09:28:39,635 [salt.state       :1780][INFO    ][3122] Running state [cfg01.mcp-odl-ha.local] at time 09:28:39.635253
2019-01-10 09:28:39,635 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cfg01.mcp-odl-ha.local]
2019-01-10 09:28:39,636 [salt.state       :300 ][INFO    ][3122] {'host': 'cfg01.mcp-odl-ha.local'}
2019-01-10 09:28:39,637 [salt.state       :1951][INFO    ][3122] Completed state [cfg01.mcp-odl-ha.local] at time 09:28:39.637229 duration_in_ms=1.976
2019-01-10 09:28:39,637 [salt.state       :1780][INFO    ][3122] Running state [prx01] at time 09:28:39.637853
2019-01-10 09:28:39,638 [salt.state       :1813][INFO    ][3122] Executing state host.present for [prx01]
2019-01-10 09:28:39,639 [salt.state       :300 ][INFO    ][3122] {'host': 'prx01'}
2019-01-10 09:28:39,639 [salt.state       :1951][INFO    ][3122] Completed state [prx01] at time 09:28:39.639784 duration_in_ms=1.931
2019-01-10 09:28:39,640 [salt.state       :1780][INFO    ][3122] Running state [prx01.mcp-odl-ha.local] at time 09:28:39.640333
2019-01-10 09:28:39,640 [salt.state       :1813][INFO    ][3122] Executing state host.present for [prx01.mcp-odl-ha.local]
2019-01-10 09:28:39,641 [salt.state       :300 ][INFO    ][3122] {'host': 'prx01.mcp-odl-ha.local'}
2019-01-10 09:28:39,642 [salt.state       :1951][INFO    ][3122] Completed state [prx01.mcp-odl-ha.local] at time 09:28:39.642330 duration_in_ms=1.996
2019-01-10 09:28:39,642 [salt.state       :1780][INFO    ][3122] Running state [kvm01] at time 09:28:39.642862
2019-01-10 09:28:39,643 [salt.state       :1813][INFO    ][3122] Executing state host.present for [kvm01]
2019-01-10 09:28:39,644 [salt.state       :300 ][INFO    ][3122] {'host': 'kvm01'}
2019-01-10 09:28:39,644 [salt.state       :1951][INFO    ][3122] Completed state [kvm01] at time 09:28:39.644859 duration_in_ms=1.998
2019-01-10 09:28:39,645 [salt.state       :1780][INFO    ][3122] Running state [kvm01.mcp-odl-ha.local] at time 09:28:39.645432
2019-01-10 09:28:39,645 [salt.state       :1813][INFO    ][3122] Executing state host.present for [kvm01.mcp-odl-ha.local]
2019-01-10 09:28:39,647 [salt.state       :300 ][INFO    ][3122] {'host': 'kvm01.mcp-odl-ha.local'}
2019-01-10 09:28:39,647 [salt.state       :1951][INFO    ][3122] Completed state [kvm01.mcp-odl-ha.local] at time 09:28:39.647438 duration_in_ms=2.006
2019-01-10 09:28:39,648 [salt.state       :1780][INFO    ][3122] Running state [kvm03] at time 09:28:39.648018
2019-01-10 09:28:39,648 [salt.state       :1813][INFO    ][3122] Executing state host.present for [kvm03]
2019-01-10 09:28:39,649 [salt.state       :300 ][INFO    ][3122] {'host': 'kvm03'}
2019-01-10 09:28:39,650 [salt.state       :1951][INFO    ][3122] Completed state [kvm03] at time 09:28:39.649986 duration_in_ms=1.969
2019-01-10 09:28:39,650 [salt.state       :1780][INFO    ][3122] Running state [kvm03.mcp-odl-ha.local] at time 09:28:39.650528
2019-01-10 09:28:39,650 [salt.state       :1813][INFO    ][3122] Executing state host.present for [kvm03.mcp-odl-ha.local]
2019-01-10 09:28:39,652 [salt.state       :300 ][INFO    ][3122] {'host': 'kvm03.mcp-odl-ha.local'}
2019-01-10 09:28:39,652 [salt.state       :1951][INFO    ][3122] Completed state [kvm03.mcp-odl-ha.local] at time 09:28:39.652529 duration_in_ms=2.001
2019-01-10 09:28:39,653 [salt.state       :1780][INFO    ][3122] Running state [kvm02] at time 09:28:39.653085
2019-01-10 09:28:39,653 [salt.state       :1813][INFO    ][3122] Executing state host.present for [kvm02]
2019-01-10 09:28:39,654 [salt.state       :300 ][INFO    ][3122] {'host': 'kvm02'}
2019-01-10 09:28:39,655 [salt.state       :1951][INFO    ][3122] Completed state [kvm02] at time 09:28:39.655147 duration_in_ms=2.062
2019-01-10 09:28:39,655 [salt.state       :1780][INFO    ][3122] Running state [kvm02.mcp-odl-ha.local] at time 09:28:39.655690
2019-01-10 09:28:39,656 [salt.state       :1813][INFO    ][3122] Executing state host.present for [kvm02.mcp-odl-ha.local]
2019-01-10 09:28:39,657 [salt.state       :300 ][INFO    ][3122] {'host': 'kvm02.mcp-odl-ha.local'}
2019-01-10 09:28:39,657 [salt.state       :1951][INFO    ][3122] Completed state [kvm02.mcp-odl-ha.local] at time 09:28:39.657719 duration_in_ms=2.029
2019-01-10 09:28:39,658 [salt.state       :1780][INFO    ][3122] Running state [dbs] at time 09:28:39.658341
2019-01-10 09:28:39,658 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs]
2019-01-10 09:28:39,659 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs'}
2019-01-10 09:28:39,660 [salt.state       :1951][INFO    ][3122] Completed state [dbs] at time 09:28:39.660300 duration_in_ms=1.959
2019-01-10 09:28:39,660 [salt.state       :1780][INFO    ][3122] Running state [dbs.mcp-odl-ha.local] at time 09:28:39.660869
2019-01-10 09:28:39,661 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs.mcp-odl-ha.local]
2019-01-10 09:28:39,662 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs.mcp-odl-ha.local'}
2019-01-10 09:28:39,662 [salt.state       :1951][INFO    ][3122] Completed state [dbs.mcp-odl-ha.local] at time 09:28:39.662859 duration_in_ms=1.99
2019-01-10 09:28:39,663 [salt.state       :1780][INFO    ][3122] Running state [prx] at time 09:28:39.663412
2019-01-10 09:28:39,663 [salt.state       :1813][INFO    ][3122] Executing state host.present for [prx]
2019-01-10 09:28:39,665 [salt.state       :300 ][INFO    ][3122] {'host': 'prx'}
2019-01-10 09:28:39,665 [salt.state       :1951][INFO    ][3122] Completed state [prx] at time 09:28:39.665477 duration_in_ms=2.064
2019-01-10 09:28:39,666 [salt.state       :1780][INFO    ][3122] Running state [prx.mcp-odl-ha.local] at time 09:28:39.666119
2019-01-10 09:28:39,666 [salt.state       :1813][INFO    ][3122] Executing state host.present for [prx.mcp-odl-ha.local]
2019-01-10 09:28:39,667 [salt.state       :300 ][INFO    ][3122] {'host': 'prx.mcp-odl-ha.local'}
2019-01-10 09:28:39,668 [salt.state       :1951][INFO    ][3122] Completed state [prx.mcp-odl-ha.local] at time 09:28:39.668270 duration_in_ms=2.151
2019-01-10 09:28:39,668 [salt.state       :1780][INFO    ][3122] Running state [prx02] at time 09:28:39.668849
2019-01-10 09:28:39,669 [salt.state       :1813][INFO    ][3122] Executing state host.present for [prx02]
2019-01-10 09:28:39,670 [salt.state       :300 ][INFO    ][3122] {'host': 'prx02'}
2019-01-10 09:28:39,670 [salt.state       :1951][INFO    ][3122] Completed state [prx02] at time 09:28:39.670918 duration_in_ms=2.069
2019-01-10 09:28:39,671 [salt.state       :1780][INFO    ][3122] Running state [prx02.mcp-odl-ha.local] at time 09:28:39.671466
2019-01-10 09:28:39,671 [salt.state       :1813][INFO    ][3122] Executing state host.present for [prx02.mcp-odl-ha.local]
2019-01-10 09:28:39,673 [salt.state       :300 ][INFO    ][3122] {'host': 'prx02.mcp-odl-ha.local'}
2019-01-10 09:28:39,673 [salt.state       :1951][INFO    ][3122] Completed state [prx02.mcp-odl-ha.local] at time 09:28:39.673483 duration_in_ms=2.018
2019-01-10 09:28:39,674 [salt.state       :1780][INFO    ][3122] Running state [msg02] at time 09:28:39.674023
2019-01-10 09:28:39,674 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg02]
2019-01-10 09:28:39,675 [salt.state       :300 ][INFO    ][3122] {'host': 'msg02'}
2019-01-10 09:28:39,675 [salt.state       :1951][INFO    ][3122] Completed state [msg02] at time 09:28:39.675419 duration_in_ms=1.396
2019-01-10 09:28:39,675 [salt.state       :1780][INFO    ][3122] Running state [msg02.mcp-odl-ha.local] at time 09:28:39.675805
2019-01-10 09:28:39,676 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg02.mcp-odl-ha.local]
2019-01-10 09:28:39,677 [salt.state       :300 ][INFO    ][3122] {'host': 'msg02.mcp-odl-ha.local'}
2019-01-10 09:28:39,677 [salt.state       :1951][INFO    ][3122] Completed state [msg02.mcp-odl-ha.local] at time 09:28:39.677229 duration_in_ms=1.424
2019-01-10 09:28:39,677 [salt.state       :1780][INFO    ][3122] Running state [msg03] at time 09:28:39.677586
2019-01-10 09:28:39,677 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg03]
2019-01-10 09:28:39,678 [salt.state       :300 ][INFO    ][3122] {'host': 'msg03'}
2019-01-10 09:28:39,679 [salt.state       :1951][INFO    ][3122] Completed state [msg03] at time 09:28:39.679005 duration_in_ms=1.419
2019-01-10 09:28:39,679 [salt.state       :1780][INFO    ][3122] Running state [msg03.mcp-odl-ha.local] at time 09:28:39.679389
2019-01-10 09:28:39,679 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg03.mcp-odl-ha.local]
2019-01-10 09:28:39,680 [salt.state       :300 ][INFO    ][3122] {'host': 'msg03.mcp-odl-ha.local'}
2019-01-10 09:28:39,680 [salt.state       :1951][INFO    ][3122] Completed state [msg03.mcp-odl-ha.local] at time 09:28:39.680880 duration_in_ms=1.491
2019-01-10 09:28:39,681 [salt.state       :1780][INFO    ][3122] Running state [msg01] at time 09:28:39.681233
2019-01-10 09:28:39,681 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg01]
2019-01-10 09:28:39,682 [salt.state       :300 ][INFO    ][3122] {'host': 'msg01'}
2019-01-10 09:28:39,682 [salt.state       :1951][INFO    ][3122] Completed state [msg01] at time 09:28:39.682680 duration_in_ms=1.448
2019-01-10 09:28:39,683 [salt.state       :1780][INFO    ][3122] Running state [msg01.mcp-odl-ha.local] at time 09:28:39.683040
2019-01-10 09:28:39,683 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg01.mcp-odl-ha.local]
2019-01-10 09:28:39,684 [salt.state       :300 ][INFO    ][3122] {'host': 'msg01.mcp-odl-ha.local'}
2019-01-10 09:28:39,684 [salt.state       :1951][INFO    ][3122] Completed state [msg01.mcp-odl-ha.local] at time 09:28:39.684507 duration_in_ms=1.466
2019-01-10 09:28:39,684 [salt.state       :1780][INFO    ][3122] Running state [msg] at time 09:28:39.684858
2019-01-10 09:28:39,685 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg]
2019-01-10 09:28:39,686 [salt.state       :300 ][INFO    ][3122] {'host': 'msg'}
2019-01-10 09:28:39,686 [salt.state       :1951][INFO    ][3122] Completed state [msg] at time 09:28:39.686293 duration_in_ms=1.434
2019-01-10 09:28:39,686 [salt.state       :1780][INFO    ][3122] Running state [msg.mcp-odl-ha.local] at time 09:28:39.686646
2019-01-10 09:28:39,686 [salt.state       :1813][INFO    ][3122] Executing state host.present for [msg.mcp-odl-ha.local]
2019-01-10 09:28:39,687 [salt.state       :300 ][INFO    ][3122] {'host': 'msg.mcp-odl-ha.local'}
2019-01-10 09:28:39,688 [salt.state       :1951][INFO    ][3122] Completed state [msg.mcp-odl-ha.local] at time 09:28:39.688056 duration_in_ms=1.409
2019-01-10 09:28:39,688 [salt.state       :1780][INFO    ][3122] Running state [cfg01] at time 09:28:39.688435
2019-01-10 09:28:39,688 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cfg01]
2019-01-10 09:28:39,689 [salt.state       :300 ][INFO    ][3122] Host cfg01 (192.168.10.11) already present
2019-01-10 09:28:39,689 [salt.state       :1951][INFO    ][3122] Completed state [cfg01] at time 09:28:39.689278 duration_in_ms=0.844
2019-01-10 09:28:39,689 [salt.state       :1780][INFO    ][3122] Running state [cfg01.mcp-odl-ha.local] at time 09:28:39.689615
2019-01-10 09:28:39,689 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cfg01.mcp-odl-ha.local]
2019-01-10 09:28:39,690 [salt.state       :300 ][INFO    ][3122] Host cfg01.mcp-odl-ha.local (192.168.10.11) already present
2019-01-10 09:28:39,690 [salt.state       :1951][INFO    ][3122] Completed state [cfg01.mcp-odl-ha.local] at time 09:28:39.690489 duration_in_ms=0.874
2019-01-10 09:28:39,690 [salt.state       :1780][INFO    ][3122] Running state [cmp002] at time 09:28:39.690814
2019-01-10 09:28:39,691 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cmp002]
2019-01-10 09:28:39,692 [salt.state       :300 ][INFO    ][3122] {'host': 'cmp002'}
2019-01-10 09:28:39,692 [salt.state       :1951][INFO    ][3122] Completed state [cmp002] at time 09:28:39.692381 duration_in_ms=1.567
2019-01-10 09:28:39,692 [salt.state       :1780][INFO    ][3122] Running state [cmp002.mcp-odl-ha.local] at time 09:28:39.692722
2019-01-10 09:28:39,692 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cmp002.mcp-odl-ha.local]
2019-01-10 09:28:39,694 [salt.state       :300 ][INFO    ][3122] {'host': 'cmp002.mcp-odl-ha.local'}
2019-01-10 09:28:39,694 [salt.state       :1951][INFO    ][3122] Completed state [cmp002.mcp-odl-ha.local] at time 09:28:39.694203 duration_in_ms=1.481
2019-01-10 09:28:39,694 [salt.state       :1780][INFO    ][3122] Running state [cmp001] at time 09:28:39.694581
2019-01-10 09:28:39,694 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cmp001]
2019-01-10 09:28:39,695 [salt.state       :300 ][INFO    ][3122] {'host': 'cmp001'}
2019-01-10 09:28:39,696 [salt.state       :1951][INFO    ][3122] Completed state [cmp001] at time 09:28:39.696009 duration_in_ms=1.428
2019-01-10 09:28:39,696 [salt.state       :1780][INFO    ][3122] Running state [cmp001.mcp-odl-ha.local] at time 09:28:39.696395
2019-01-10 09:28:39,696 [salt.state       :1813][INFO    ][3122] Executing state host.present for [cmp001.mcp-odl-ha.local]
2019-01-10 09:28:39,697 [salt.state       :300 ][INFO    ][3122] {'host': 'cmp001.mcp-odl-ha.local'}
2019-01-10 09:28:39,697 [salt.state       :1951][INFO    ][3122] Completed state [cmp001.mcp-odl-ha.local] at time 09:28:39.697837 duration_in_ms=1.442
2019-01-10 09:28:39,698 [salt.state       :1780][INFO    ][3122] Running state [dbs01] at time 09:28:39.698202
2019-01-10 09:28:39,698 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs01]
2019-01-10 09:28:39,699 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs01'}
2019-01-10 09:28:39,699 [salt.state       :1951][INFO    ][3122] Completed state [dbs01] at time 09:28:39.699634 duration_in_ms=1.432
2019-01-10 09:28:39,700 [salt.state       :1780][INFO    ][3122] Running state [dbs01.mcp-odl-ha.local] at time 09:28:39.700026
2019-01-10 09:28:39,700 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs01.mcp-odl-ha.local]
2019-01-10 09:28:39,701 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs01.mcp-odl-ha.local'}
2019-01-10 09:28:39,701 [salt.state       :1951][INFO    ][3122] Completed state [dbs01.mcp-odl-ha.local] at time 09:28:39.701517 duration_in_ms=1.49
2019-01-10 09:28:39,701 [salt.state       :1780][INFO    ][3122] Running state [dbs02] at time 09:28:39.701917
2019-01-10 09:28:39,702 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs02]
2019-01-10 09:28:39,703 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs02'}
2019-01-10 09:28:39,703 [salt.state       :1951][INFO    ][3122] Completed state [dbs02] at time 09:28:39.703349 duration_in_ms=1.433
2019-01-10 09:28:39,703 [salt.state       :1780][INFO    ][3122] Running state [dbs02.mcp-odl-ha.local] at time 09:28:39.703732
2019-01-10 09:28:39,703 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs02.mcp-odl-ha.local]
2019-01-10 09:28:39,705 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs02.mcp-odl-ha.local'}
2019-01-10 09:28:39,705 [salt.state       :1951][INFO    ][3122] Completed state [dbs02.mcp-odl-ha.local] at time 09:28:39.705255 duration_in_ms=1.523
2019-01-10 09:28:39,705 [salt.state       :1780][INFO    ][3122] Running state [dbs03] at time 09:28:39.705613
2019-01-10 09:28:39,705 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs03]
2019-01-10 09:28:39,707 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs03'}
2019-01-10 09:28:39,707 [salt.state       :1951][INFO    ][3122] Completed state [dbs03] at time 09:28:39.707320 duration_in_ms=1.707
2019-01-10 09:28:39,707 [salt.state       :1780][INFO    ][3122] Running state [dbs03.mcp-odl-ha.local] at time 09:28:39.707715
2019-01-10 09:28:39,707 [salt.state       :1813][INFO    ][3122] Executing state host.present for [dbs03.mcp-odl-ha.local]
2019-01-10 09:28:39,709 [salt.state       :300 ][INFO    ][3122] {'host': 'dbs03.mcp-odl-ha.local'}
2019-01-10 09:28:39,709 [salt.state       :1951][INFO    ][3122] Completed state [dbs03.mcp-odl-ha.local] at time 09:28:39.709223 duration_in_ms=1.508
2019-01-10 09:28:39,709 [salt.state       :1780][INFO    ][3122] Running state [odl02] at time 09:28:39.709588
2019-01-10 09:28:39,709 [salt.state       :1813][INFO    ][3122] Executing state host.present for [odl02]
2019-01-10 09:28:39,710 [salt.state       :300 ][INFO    ][3122] {'host': 'odl02'}
2019-01-10 09:28:39,711 [salt.state       :1951][INFO    ][3122] Completed state [odl02] at time 09:28:39.711108 duration_in_ms=1.52
2019-01-10 09:28:39,711 [salt.state       :1780][INFO    ][3122] Running state [odl02.mcp-odl-ha.local] at time 09:28:39.711470
2019-01-10 09:28:39,711 [salt.state       :1813][INFO    ][3122] Executing state host.present for [odl02.mcp-odl-ha.local]
2019-01-10 09:28:39,712 [salt.state       :300 ][INFO    ][3122] {'host': 'odl02.mcp-odl-ha.local'}
2019-01-10 09:28:39,713 [salt.state       :1951][INFO    ][3122] Completed state [odl02.mcp-odl-ha.local] at time 09:28:39.713034 duration_in_ms=1.563
2019-01-10 09:28:39,713 [salt.state       :1780][INFO    ][3122] Running state [odl03] at time 09:28:39.713383
2019-01-10 09:28:39,713 [salt.state       :1813][INFO    ][3122] Executing state host.present for [odl03]
2019-01-10 09:28:39,714 [salt.state       :300 ][INFO    ][3122] {'host': 'odl03'}
2019-01-10 09:28:39,714 [salt.state       :1951][INFO    ][3122] Completed state [odl03] at time 09:28:39.714877 duration_in_ms=1.494
2019-01-10 09:28:39,715 [salt.state       :1780][INFO    ][3122] Running state [odl03.mcp-odl-ha.local] at time 09:28:39.715273
2019-01-10 09:28:39,715 [salt.state       :1813][INFO    ][3122] Executing state host.present for [odl03.mcp-odl-ha.local]
2019-01-10 09:28:39,716 [salt.state       :300 ][INFO    ][3122] {'host': 'odl03.mcp-odl-ha.local'}
2019-01-10 09:28:39,716 [salt.state       :1951][INFO    ][3122] Completed state [odl03.mcp-odl-ha.local] at time 09:28:39.716827 duration_in_ms=1.554
2019-01-10 09:28:39,717 [salt.state       :1780][INFO    ][3122] Running state [odl01] at time 09:28:39.717240
2019-01-10 09:28:39,717 [salt.state       :1813][INFO    ][3122] Executing state host.present for [odl01]
2019-01-10 09:28:39,718 [salt.state       :300 ][INFO    ][3122] {'host': 'odl01'}
2019-01-10 09:28:39,718 [salt.state       :1951][INFO    ][3122] Completed state [odl01] at time 09:28:39.718845 duration_in_ms=1.605
2019-01-10 09:28:39,719 [salt.state       :1780][INFO    ][3122] Running state [odl01.mcp-odl-ha.local] at time 09:28:39.719245
2019-01-10 09:28:39,719 [salt.state       :1813][INFO    ][3122] Executing state host.present for [odl01.mcp-odl-ha.local]
2019-01-10 09:28:39,720 [salt.state       :300 ][INFO    ][3122] {'host': 'odl01.mcp-odl-ha.local'}
2019-01-10 09:28:39,720 [salt.state       :1951][INFO    ][3122] Completed state [odl01.mcp-odl-ha.local] at time 09:28:39.720826 duration_in_ms=1.581
2019-01-10 09:28:39,721 [salt.state       :1780][INFO    ][3122] Running state [mas01] at time 09:28:39.721231
2019-01-10 09:28:39,721 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mas01]
2019-01-10 09:28:39,722 [salt.state       :300 ][INFO    ][3122] {'host': 'mas01'}
2019-01-10 09:28:39,723 [salt.state       :1951][INFO    ][3122] Completed state [mas01] at time 09:28:39.722958 duration_in_ms=1.727
2019-01-10 09:28:39,723 [salt.state       :1780][INFO    ][3122] Running state [mas01.mcp-odl-ha.local] at time 09:28:39.723342
2019-01-10 09:28:39,723 [salt.state       :1813][INFO    ][3122] Executing state host.present for [mas01.mcp-odl-ha.local]
2019-01-10 09:28:39,724 [salt.state       :300 ][INFO    ][3122] {'host': 'mas01.mcp-odl-ha.local'}
2019-01-10 09:28:39,724 [salt.state       :1951][INFO    ][3122] Completed state [mas01.mcp-odl-ha.local] at time 09:28:39.724900 duration_in_ms=1.558
2019-01-10 09:28:39,725 [salt.state       :1780][INFO    ][3122] Running state [ctl02] at time 09:28:39.725291
2019-01-10 09:28:39,725 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl02]
2019-01-10 09:28:39,726 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl02'}
2019-01-10 09:28:39,726 [salt.state       :1951][INFO    ][3122] Completed state [ctl02] at time 09:28:39.726925 duration_in_ms=1.634
2019-01-10 09:28:39,727 [salt.state       :1780][INFO    ][3122] Running state [ctl02.mcp-odl-ha.local] at time 09:28:39.727297
2019-01-10 09:28:39,727 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl02.mcp-odl-ha.local]
2019-01-10 09:28:39,728 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl02.mcp-odl-ha.local'}
2019-01-10 09:28:39,728 [salt.state       :1951][INFO    ][3122] Completed state [ctl02.mcp-odl-ha.local] at time 09:28:39.728920 duration_in_ms=1.623
2019-01-10 09:28:39,729 [salt.state       :1780][INFO    ][3122] Running state [ctl03] at time 09:28:39.729292
2019-01-10 09:28:39,729 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl03]
2019-01-10 09:28:39,730 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl03'}
2019-01-10 09:28:39,730 [salt.state       :1951][INFO    ][3122] Completed state [ctl03] at time 09:28:39.730850 duration_in_ms=1.557
2019-01-10 09:28:39,731 [salt.state       :1780][INFO    ][3122] Running state [ctl03.mcp-odl-ha.local] at time 09:28:39.731246
2019-01-10 09:28:39,731 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl03.mcp-odl-ha.local]
2019-01-10 09:28:39,732 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl03.mcp-odl-ha.local'}
2019-01-10 09:28:39,732 [salt.state       :1951][INFO    ][3122] Completed state [ctl03.mcp-odl-ha.local] at time 09:28:39.732887 duration_in_ms=1.64
2019-01-10 09:28:39,733 [salt.state       :1780][INFO    ][3122] Running state [ctl01] at time 09:28:39.733260
2019-01-10 09:28:39,733 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl01]
2019-01-10 09:28:39,734 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl01'}
2019-01-10 09:28:39,734 [salt.state       :1951][INFO    ][3122] Completed state [ctl01] at time 09:28:39.734910 duration_in_ms=1.651
2019-01-10 09:28:39,735 [salt.state       :1780][INFO    ][3122] Running state [ctl01.mcp-odl-ha.local] at time 09:28:39.735303
2019-01-10 09:28:39,735 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl01.mcp-odl-ha.local]
2019-01-10 09:28:39,736 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl01.mcp-odl-ha.local'}
2019-01-10 09:28:39,737 [salt.state       :1951][INFO    ][3122] Completed state [ctl01.mcp-odl-ha.local] at time 09:28:39.737096 duration_in_ms=1.793
2019-01-10 09:28:39,737 [salt.state       :1780][INFO    ][3122] Running state [ctl] at time 09:28:39.737477
2019-01-10 09:28:39,737 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl]
2019-01-10 09:28:39,738 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl'}
2019-01-10 09:28:39,739 [salt.state       :1951][INFO    ][3122] Completed state [ctl] at time 09:28:39.739166 duration_in_ms=1.689
2019-01-10 09:28:39,739 [salt.state       :1780][INFO    ][3122] Running state [ctl.mcp-odl-ha.local] at time 09:28:39.739578
2019-01-10 09:28:39,739 [salt.state       :1813][INFO    ][3122] Executing state host.present for [ctl.mcp-odl-ha.local]
2019-01-10 09:28:39,741 [salt.state       :300 ][INFO    ][3122] {'host': 'ctl.mcp-odl-ha.local'}
2019-01-10 09:28:39,741 [salt.state       :1951][INFO    ][3122] Completed state [ctl.mcp-odl-ha.local] at time 09:28:39.741191 duration_in_ms=1.613
2019-01-10 09:28:39,741 [salt.state       :1780][INFO    ][3122] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 09:28:39.741437
2019-01-10 09:28:39,741 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2019-01-10 09:28:39,742 [salt.state       :300 ][INFO    ][3122] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2019-01-10 09:28:39,742 [salt.state       :1951][INFO    ][3122] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 09:28:39.742323 duration_in_ms=0.886
2019-01-10 09:28:39,743 [salt.state       :1780][INFO    ][3122] Running state [ens3] at time 09:28:39.743036
2019-01-10 09:28:39,743 [salt.state       :1813][INFO    ][3122] Executing state network.managed for [ens3]
2019-01-10 09:28:39,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['ifup', 'ens3'] in directory '/root'
2019-01-10 09:28:39,954 [salt.minion      :1308][INFO    ][3030] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110092839943816
2019-01-10 09:28:39,969 [salt.minion      :1432][INFO    ][5185] Starting a new job with PID 5185
2019-01-10 09:28:39,985 [salt.minion      :1711][INFO    ][5185] Returning information for job: 20190110092839943816
2019-01-10 09:28:40,530 [salt.state       :300 ][INFO    ][3122] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2019-01-10 09:28:40,531 [salt.state       :1951][INFO    ][3122] Completed state [ens3] at time 09:28:40.531276 duration_in_ms=788.238
2019-01-10 09:28:40,531 [salt.state       :1780][INFO    ][3122] Running state [ens2] at time 09:28:40.531901
2019-01-10 09:28:40,532 [salt.state       :1813][INFO    ][3122] Executing state network.managed for [ens2]
2019-01-10 09:28:40,562 [salt.state       :300 ][INFO    ][3122] {'interface': 'Added network interface.'}
2019-01-10 09:28:40,564 [salt.state       :1951][INFO    ][3122] Completed state [ens2] at time 09:28:40.563924 duration_in_ms=32.021
2019-01-10 09:28:40,564 [salt.state       :1780][INFO    ][3122] Running state [linux_system_network] at time 09:28:40.564607
2019-01-10 09:28:40,565 [salt.state       :1813][INFO    ][3122] Executing state network.system for [linux_system_network]
2019-01-10 09:28:40,566 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2019-01-10 09:28:40,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2019-01-10 09:28:40,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2019-01-10 09:28:40,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2019-01-10 09:28:41,041 [salt.loaded.int.module.debian_ip:1964][WARNING ][3122] The network state sls is requiring a reboot of the system to properly apply network configuration.
2019-01-10 09:28:41,042 [salt.state       :300 ][INFO    ][3122] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb03\n\n+DOMAIN=mcp-odl-ha.local\n\n+SEARCH=maas\n'}
2019-01-10 09:28:41,042 [salt.state       :1951][INFO    ][3122] Completed state [linux_system_network] at time 09:28:41.042523 duration_in_ms=477.916
2019-01-10 09:28:41,043 [salt.state       :1780][INFO    ][3122] Running state [/etc/profile.d/proxy.sh] at time 09:28:41.043135
2019-01-10 09:28:41,043 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/profile.d/proxy.sh]
2019-01-10 09:28:41,044 [salt.state       :300 ][INFO    ][3122] File /etc/profile.d/proxy.sh is not present
2019-01-10 09:28:41,044 [salt.state       :1951][INFO    ][3122] Completed state [/etc/profile.d/proxy.sh] at time 09:28:41.044867 duration_in_ms=1.738
2019-01-10 09:28:41,045 [salt.state       :1780][INFO    ][3122] Running state [/etc/apt/apt.conf.d/95proxies] at time 09:28:41.045297
2019-01-10 09:28:41,045 [salt.state       :1813][INFO    ][3122] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2019-01-10 09:28:41,046 [salt.state       :300 ][INFO    ][3122] File /etc/apt/apt.conf.d/95proxies is not present
2019-01-10 09:28:41,046 [salt.state       :1951][INFO    ][3122] Completed state [/etc/apt/apt.conf.d/95proxies] at time 09:28:41.046686 duration_in_ms=1.39
2019-01-10 09:28:41,048 [salt.state       :1780][INFO    ][3122] Running state [/dev/shm] at time 09:28:41.048216
2019-01-10 09:28:41,048 [salt.state       :1813][INFO    ][3122] Executing state mount.mounted for [/dev/shm]
2019-01-10 09:28:41,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'mount -l' in directory '/root'
2019-01-10 09:28:41,065 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'blkid' in directory '/root'
2019-01-10 09:28:41,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'mount -l' in directory '/root'
2019-01-10 09:28:41,097 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-01-10 09:28:41,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'mount -l' in directory '/root'
2019-01-10 09:28:41,124 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2019-01-10 09:28:41,136 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'mount -l' in directory '/root'
2019-01-10 09:28:41,149 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'umount /dev/shm' in directory '/root'
2019-01-10 09:28:41,161 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3122] Command '['umount', '/dev/shm']' failed with return code: 32
2019-01-10 09:28:41,162 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3122] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2019-01-10 09:28:41,162 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3122] retcode: 32
2019-01-10 09:28:41,163 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'mount -l' in directory '/root'
2019-01-10 09:28:41,176 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command 'blkid' in directory '/root'
2019-01-10 09:28:41,190 [salt.state       :300 ][INFO    ][3122] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2019-01-10 09:28:41,191 [salt.state       :1951][INFO    ][3122] Completed state [/dev/shm] at time 09:28:41.191136 duration_in_ms=142.919
2019-01-10 09:28:41,193 [salt.state       :1780][INFO    ][3122] Running state [ntp] at time 09:28:41.193347
2019-01-10 09:28:41,193 [salt.state       :1813][INFO    ][3122] Executing state pkg.installed for [ntp]
2019-01-10 09:28:41,398 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:28:41,420 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2019-01-10 09:28:44,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:28:44,399 [salt.state       :300 ][INFO    ][3122] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2019-01-10 09:28:44,419 [salt.state       :915 ][INFO    ][3122] Loading fresh modules for state activity
2019-01-10 09:28:44,457 [salt.state       :1951][INFO    ][3122] Completed state [ntp] at time 09:28:44.457478 duration_in_ms=3264.129
2019-01-10 09:28:44,463 [salt.state       :1780][INFO    ][3122] Running state [/etc/ntp.conf] at time 09:28:44.463146
2019-01-10 09:28:44,463 [salt.state       :1813][INFO    ][3122] Executing state file.managed for [/etc/ntp.conf]
2019-01-10 09:28:44,484 [salt.fileclient  :1219][INFO    ][3122] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2019-01-10 09:28:44,554 [salt.state       :300 ][INFO    ][3122] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2019-01-10 09:28:44,554 [salt.state       :1951][INFO    ][3122] Completed state [/etc/ntp.conf] at time 09:28:44.554713 duration_in_ms=91.567
2019-01-10 09:28:44,995 [salt.state       :1780][INFO    ][3122] Running state [ntp] at time 09:28:44.995562
2019-01-10 09:28:44,996 [salt.state       :1813][INFO    ][3122] Executing state service.running for [ntp]
2019-01-10 09:28:44,999 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2019-01-10 09:28:45,014 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-01-10 09:28:45,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2019-01-10 09:28:45,043 [salt.state       :300 ][INFO    ][3122] The service ntp is already running
2019-01-10 09:28:45,043 [salt.state       :1951][INFO    ][3122] Completed state [ntp] at time 09:28:45.043451 duration_in_ms=47.889
2019-01-10 09:28:45,043 [salt.state       :1780][INFO    ][3122] Running state [ntp] at time 09:28:45.043737
2019-01-10 09:28:45,044 [salt.state       :1813][INFO    ][3122] Executing state service.mod_watch for [ntp]
2019-01-10 09:28:45,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2019-01-10 09:28:45,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3122] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2019-01-10 09:28:45,131 [salt.state       :300 ][INFO    ][3122] {'ntp': True}
2019-01-10 09:28:45,131 [salt.state       :1951][INFO    ][3122] Completed state [ntp] at time 09:28:45.131551 duration_in_ms=87.814
2019-01-10 09:28:45,139 [salt.minion      :1711][INFO    ][3122] Returning information for job: 20190110092759537469
2019-01-10 09:28:53,419 [salt.minion      :1308][INFO    ][3030] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20190110092853404569
2019-01-10 09:28:53,438 [salt.minion      :1432][INFO    ][6298] Starting a new job with PID 6298
2019-01-10 09:28:53,460 [salt.minion      :1711][INFO    ][6298] Returning information for job: 20190110092853404569
2019-01-10 09:28:54,176 [salt.minion      :1308][INFO    ][3030] User sudo_ubuntu Executing command system.reboot with jid 20190110092854164095
2019-01-10 09:28:54,190 [salt.minion      :1432][INFO    ][6303] Starting a new job with PID 6303
2019-01-10 09:28:54,198 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6303] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2019-01-10 09:28:54,325 [salt.utils.parsers:1051][WARNING ][3030] Minion received a SIGTERM. Exiting.
2019-01-10 09:28:54,325 [salt.cli.daemons :82  ][INFO    ][3030] Shutting down the Salt Minion
2019-01-10 09:28:55,048 [salt.minion      :1711][INFO    ][6303] Returning information for job: 20190110092854164095
2019-01-10 09:29:05,862 [salt.cli.daemons :293 ][INFO    ][1462] Setting up the Salt Minion "mdb03.mcp-odl-ha.local"
2019-01-10 09:29:06,181 [salt.cli.daemons :82  ][INFO    ][1462] Starting up the Salt Minion
2019-01-10 09:29:06,182 [salt.utils.event :1017][INFO    ][1462] Starting pull socket on /var/run/salt/minion/minion_event_4701d3a5d9_pull.ipc
2019-01-10 09:29:06,903 [salt.minion      :976 ][INFO    ][1462] Creating minion process manager
2019-01-10 09:29:08,390 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1462] Executing command ['date', '+%z'] in directory '/root'
2019-01-10 09:29:08,422 [salt.utils.schedule:568 ][INFO    ][1462] Updating job settings for scheduled job: __mine_interval
2019-01-10 09:29:08,424 [salt.minion      :1108][INFO    ][1462] Added mine.update to scheduler
2019-01-10 09:29:08,429 [salt.minion      :1975][INFO    ][1462] Minion is starting as user 'root'
2019-01-10 09:29:08,441 [salt.minion      :2336][INFO    ][1462] Minion is ready to receive requests!
2019-01-10 09:29:14,939 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command test.ping with jid 20190110092914921626
2019-01-10 09:29:14,951 [salt.minion      :1432][INFO    ][1614] Starting a new job with PID 1614
2019-01-10 09:29:14,982 [salt.minion      :1711][INFO    ][1614] Returning information for job: 20190110092914921626
2019-01-10 09:29:15,708 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command pkg.upgrade with jid 20190110092915691158
2019-01-10 09:29:15,721 [salt.minion      :1432][INFO    ][1619] Starting a new job with PID 1619
2019-01-10 09:29:15,805 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1619] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:29:16,493 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1619] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2019-01-10 09:29:25,752 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110092925738709
2019-01-10 09:29:25,765 [salt.minion      :1432][INFO    ][2826] Starting a new job with PID 2826
2019-01-10 09:29:25,788 [salt.minion      :1711][INFO    ][2826] Returning information for job: 20190110092925738709
2019-01-10 09:29:28,470 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1619] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:29:28,506 [salt.minion      :1711][INFO    ][1619] Returning information for job: 20190110092915691158
2019-01-10 09:36:34,854 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command test.ping with jid 20190110093634848212
2019-01-10 09:36:34,864 [salt.minion      :1432][INFO    ][2967] Starting a new job with PID 2967
2019-01-10 09:36:34,883 [salt.minion      :1711][INFO    ][2967] Returning information for job: 20190110093634848212
2019-01-10 09:37:14,742 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110093714733082
2019-01-10 09:37:14,753 [salt.minion      :1432][INFO    ][2972] Starting a new job with PID 2972
2019-01-10 09:37:15,703 [salt.state       :915 ][INFO    ][2972] Loading fresh modules for state activity
2019-01-10 09:37:15,753 [salt.fileclient  :1219][INFO    ][2972] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2019-01-10 09:37:15,780 [salt.fileclient  :1219][INFO    ][2972] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2019-01-10 09:37:16,685 [salt.state       :1780][INFO    ][2972] Running state [keepalived] at time 09:37:16.685451
2019-01-10 09:37:16,686 [salt.state       :1813][INFO    ][2972] Executing state pkg.installed for [keepalived]
2019-01-10 09:37:16,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:37:16,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2019-01-10 09:37:17,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 09:37:18,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:37:18,589 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2019-01-10 09:37:21,732 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:37:21,763 [salt.state       :300 ][INFO    ][2972] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.2.24-1ubuntu0.16.04.1'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2019-01-10 09:37:21,784 [salt.state       :915 ][INFO    ][2972] Loading fresh modules for state activity
2019-01-10 09:37:21,817 [salt.state       :1951][INFO    ][2972] Completed state [keepalived] at time 09:37:21.817570 duration_in_ms=5132.118
2019-01-10 09:37:21,822 [salt.state       :1780][INFO    ][2972] Running state [lsof] at time 09:37:21.822301
2019-01-10 09:37:21,822 [salt.state       :1813][INFO    ][2972] Executing state pkg.installed for [lsof]
2019-01-10 09:37:22,390 [salt.state       :300 ][INFO    ][2972] All specified packages are already installed
2019-01-10 09:37:22,390 [salt.state       :1951][INFO    ][2972] Completed state [lsof] at time 09:37:22.390384 duration_in_ms=568.082
2019-01-10 09:37:22,394 [salt.state       :1780][INFO    ][2972] Running state [/etc/keepalived/keepalived.conf] at time 09:37:22.394695
2019-01-10 09:37:22,394 [salt.state       :1813][INFO    ][2972] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2019-01-10 09:37:22,424 [salt.fileclient  :1219][INFO    ][2972] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2019-01-10 09:37:22,466 [salt.state       :300 ][INFO    ][2972] File changed:
New file
2019-01-10 09:37:22,466 [salt.state       :1951][INFO    ][2972] Completed state [/etc/keepalived/keepalived.conf] at time 09:37:22.466659 duration_in_ms=71.963
2019-01-10 09:37:22,468 [salt.state       :1780][INFO    ][2972] Running state [keepalived] at time 09:37:22.468291
2019-01-10 09:37:22,468 [salt.state       :1813][INFO    ][2972] Executing state service.running for [keepalived]
2019-01-10 09:37:22,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2019-01-10 09:37:22,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-01-10 09:37:22,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-01-10 09:37:22,506 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2019-01-10 09:37:22,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2019-01-10 09:37:22,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-01-10 09:37:22,589 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2972] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2019-01-10 09:37:22,602 [salt.state       :300 ][INFO    ][2972] {'keepalived': True}
2019-01-10 09:37:22,602 [salt.state       :1951][INFO    ][2972] Completed state [keepalived] at time 09:37:22.602847 duration_in_ms=134.554
2019-01-10 09:37:22,604 [salt.minion      :1711][INFO    ][2972] Returning information for job: 20190110093714733082
2019-01-10 09:40:24,971 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command pillar.get with jid 20190110094024969585
2019-01-10 09:40:24,984 [salt.minion      :1432][INFO    ][4311] Starting a new job with PID 4311
2019-01-10 09:40:24,990 [salt.minion      :1711][INFO    ][4311] Returning information for job: 20190110094024969585
2019-01-10 09:50:43,981 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110095043984345
2019-01-10 09:50:43,992 [salt.minion      :1432][INFO    ][4334] Starting a new job with PID 4334
2019-01-10 09:50:52,314 [salt.state       :915 ][INFO    ][4334] Loading fresh modules for state activity
2019-01-10 09:50:52,361 [salt.fileclient  :1219][INFO    ][4334] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2019-01-10 09:50:52,385 [salt.fileclient  :1219][INFO    ][4334] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2019-01-10 09:50:52,406 [salt.fileclient  :1219][INFO    ][4334] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2019-01-10 09:50:53,013 [salt.state       :1780][INFO    ][4334] Running state [memcached] at time 09:50:53.013163
2019-01-10 09:50:53,014 [salt.state       :1813][INFO    ][4334] Executing state pkg.installed for [memcached]
2019-01-10 09:50:53,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:50:53,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2019-01-10 09:50:53,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 09:50:54,009 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110095054004230
2019-01-10 09:50:54,023 [salt.minion      :1432][INFO    ][4643] Starting a new job with PID 4643
2019-01-10 09:50:54,036 [salt.minion      :1711][INFO    ][4643] Returning information for job: 20190110095054004230
2019-01-10 09:50:54,797 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:50:54,817 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2019-01-10 09:50:57,367 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:50:57,400 [salt.state       :300 ][INFO    ][4334] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2019-01-10 09:50:57,418 [salt.state       :915 ][INFO    ][4334] Loading fresh modules for state activity
2019-01-10 09:50:57,456 [salt.state       :1951][INFO    ][4334] Completed state [memcached] at time 09:50:57.456410 duration_in_ms=4443.247
2019-01-10 09:50:57,462 [salt.state       :1780][INFO    ][4334] Running state [python-memcache] at time 09:50:57.462257
2019-01-10 09:50:57,462 [salt.state       :1813][INFO    ][4334] Executing state pkg.installed for [python-memcache]
2019-01-10 09:50:58,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:50:58,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2019-01-10 09:50:59,684 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:50:59,725 [salt.state       :300 ][INFO    ][4334] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2019-01-10 09:50:59,742 [salt.state       :915 ][INFO    ][4334] Loading fresh modules for state activity
2019-01-10 09:50:59,777 [salt.state       :1951][INFO    ][4334] Completed state [python-memcache] at time 09:50:59.777188 duration_in_ms=2314.93
2019-01-10 09:50:59,781 [salt.state       :1780][INFO    ][4334] Running state [/etc/memcached.conf] at time 09:50:59.781607
2019-01-10 09:50:59,782 [salt.state       :1813][INFO    ][4334] Executing state file.managed for [/etc/memcached.conf]
2019-01-10 09:50:59,812 [salt.fileclient  :1219][INFO    ][4334] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2019-01-10 09:50:59,846 [salt.state       :300 ][INFO    ][4334] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2019-01-10 09:50:59,853 [salt.state       :1951][INFO    ][4334] Completed state [/etc/memcached.conf] at time 09:50:59.853326 duration_in_ms=71.718
2019-01-10 09:51:00,298 [salt.state       :1780][INFO    ][4334] Running state [memcached] at time 09:51:00.298705
2019-01-10 09:51:00,299 [salt.state       :1813][INFO    ][4334] Executing state service.running for [memcached]
2019-01-10 09:51:00,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2019-01-10 09:51:00,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-01-10 09:51:00,328 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2019-01-10 09:51:00,341 [salt.state       :300 ][INFO    ][4334] The service memcached is already running
2019-01-10 09:51:00,341 [salt.state       :1951][INFO    ][4334] Completed state [memcached] at time 09:51:00.341646 duration_in_ms=42.939
2019-01-10 09:51:00,341 [salt.state       :1780][INFO    ][4334] Running state [memcached] at time 09:51:00.341911
2019-01-10 09:51:00,342 [salt.state       :1813][INFO    ][4334] Executing state service.mod_watch for [memcached]
2019-01-10 09:51:00,343 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2019-01-10 09:51:00,356 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4334] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2019-01-10 09:51:00,377 [salt.state       :300 ][INFO    ][4334] {'memcached': True}
2019-01-10 09:51:00,378 [salt.state       :1951][INFO    ][4334] Completed state [memcached] at time 09:51:00.378216 duration_in_ms=36.304
2019-01-10 09:51:00,379 [salt.minion      :1711][INFO    ][4334] Returning information for job: 20190110095043984345
2019-01-10 09:51:02,601 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110095102602805
2019-01-10 09:51:02,614 [salt.minion      :1432][INFO    ][5297] Starting a new job with PID 5297
2019-01-10 09:51:04,638 [salt.state       :915 ][INFO    ][5297] Loading fresh modules for state activity
2019-01-10 09:51:05,163 [salt.fileclient  :1219][INFO    ][5297] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2019-01-10 09:51:05,193 [salt.fileclient  :1219][INFO    ][5297] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2019-01-10 09:51:05,866 [salt.state       :1780][INFO    ][5297] Running state [haproxy] at time 09:51:05.866673
2019-01-10 09:51:05,867 [salt.state       :1813][INFO    ][5297] Executing state pkg.installed for [haproxy]
2019-01-10 09:51:05,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:51:06,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2019-01-10 09:51:06,273 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 09:51:07,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:51:07,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2019-01-10 09:51:10,554 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:51:10,594 [salt.state       :300 ][INFO    ][5297] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2019-01-10 09:51:10,614 [salt.state       :915 ][INFO    ][5297] Loading fresh modules for state activity
2019-01-10 09:51:10,656 [salt.state       :1951][INFO    ][5297] Completed state [haproxy] at time 09:51:10.656681 duration_in_ms=4790.006
2019-01-10 09:51:10,662 [salt.state       :1780][INFO    ][5297] Running state [/etc/default/haproxy] at time 09:51:10.662117
2019-01-10 09:51:10,662 [salt.state       :1813][INFO    ][5297] Executing state file.managed for [/etc/default/haproxy]
2019-01-10 09:51:10,690 [salt.fileclient  :1219][INFO    ][5297] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2019-01-10 09:51:10,693 [salt.state       :300 ][INFO    ][5297] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2019-01-10 09:51:10,696 [salt.state       :1951][INFO    ][5297] Completed state [/etc/default/haproxy] at time 09:51:10.696304 duration_in_ms=34.187
2019-01-10 09:51:10,696 [salt.state       :1780][INFO    ][5297] Running state [/etc/haproxy/haproxy.cfg] at time 09:51:10.696835
2019-01-10 09:51:10,697 [salt.state       :1813][INFO    ][5297] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2019-01-10 09:51:10,716 [salt.fileclient  :1219][INFO    ][5297] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2019-01-10 09:51:10,877 [salt.state       :300 ][INFO    ][5297] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2019-01-10 09:51:10,886 [salt.state       :1951][INFO    ][5297] Completed state [/etc/haproxy/haproxy.cfg] at time 09:51:10.886558 duration_in_ms=189.722
2019-01-10 09:51:10,886 [salt.state       :1780][INFO    ][5297] Running state [/etc/haproxy/ssl] at time 09:51:10.886954
2019-01-10 09:51:10,887 [salt.state       :1813][INFO    ][5297] Executing state file.directory for [/etc/haproxy/ssl]
2019-01-10 09:51:10,888 [salt.state       :300 ][INFO    ][5297] {'/etc/haproxy/ssl': 'New Dir'}
2019-01-10 09:51:10,889 [salt.state       :1951][INFO    ][5297] Completed state [/etc/haproxy/ssl] at time 09:51:10.889108 duration_in_ms=2.153
2019-01-10 09:51:10,889 [salt.state       :1780][INFO    ][5297] Running state [/etc/haproxy/errors/429.http11] at time 09:51:10.889415
2019-01-10 09:51:10,889 [salt.state       :1813][INFO    ][5297] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2019-01-10 09:51:10,922 [salt.fileclient  :1219][INFO    ][5297] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2019-01-10 09:51:10,930 [salt.state       :300 ][INFO    ][5297] File changed:
New file
2019-01-10 09:51:10,931 [salt.state       :1951][INFO    ][5297] Completed state [/etc/haproxy/errors/429.http11] at time 09:51:10.931068 duration_in_ms=41.653
2019-01-10 09:51:10,932 [salt.state       :1780][INFO    ][5297] Running state [haproxy_status_packages] at time 09:51:10.932365
2019-01-10 09:51:10,932 [salt.state       :1813][INFO    ][5297] Executing state pkg.installed for [haproxy_status_packages]
2019-01-10 09:51:11,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 09:51:11,572 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2019-01-10 09:51:12,719 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110095112718770
2019-01-10 09:51:12,732 [salt.minion      :1432][INFO    ][6346] Starting a new job with PID 6346
2019-01-10 09:51:12,746 [salt.minion      :1711][INFO    ][6346] Returning information for job: 20190110095112718770
2019-01-10 09:51:13,195 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 09:51:13,229 [salt.state       :300 ][INFO    ][5297] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2019-01-10 09:51:13,246 [salt.state       :915 ][INFO    ][5297] Loading fresh modules for state activity
2019-01-10 09:51:13,281 [salt.state       :1951][INFO    ][5297] Completed state [haproxy_status_packages] at time 09:51:13.281100 duration_in_ms=2348.734
2019-01-10 09:51:13,284 [salt.state       :1780][INFO    ][5297] Running state [/usr/bin/haproxy-status.sh] at time 09:51:13.284645
2019-01-10 09:51:13,284 [salt.state       :1813][INFO    ][5297] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2019-01-10 09:51:13,307 [salt.fileclient  :1219][INFO    ][5297] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2019-01-10 09:51:13,332 [salt.state       :300 ][INFO    ][5297] File changed:
New file
2019-01-10 09:51:13,332 [salt.state       :1951][INFO    ][5297] Completed state [/usr/bin/haproxy-status.sh] at time 09:51:13.332578 duration_in_ms=47.933
2019-01-10 09:51:13,335 [salt.state       :1780][INFO    ][5297] Running state [net.ipv4.ip_nonlocal_bind] at time 09:51:13.335201
2019-01-10 09:51:13,335 [salt.state       :1813][INFO    ][5297] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2019-01-10 09:51:13,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2019-01-10 09:51:13,356 [salt.state       :300 ][INFO    ][5297] {'net.ipv4.ip_nonlocal_bind': 1}
2019-01-10 09:51:13,357 [salt.state       :1951][INFO    ][5297] Completed state [net.ipv4.ip_nonlocal_bind] at time 09:51:13.357229 duration_in_ms=22.027
2019-01-10 09:51:13,842 [salt.state       :1780][INFO    ][5297] Running state [haproxy] at time 09:51:13.842714
2019-01-10 09:51:13,843 [salt.state       :1813][INFO    ][5297] Executing state service.running for [haproxy]
2019-01-10 09:51:13,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-01-10 09:51:13,858 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-01-10 09:51:13,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2019-01-10 09:51:13,882 [salt.state       :300 ][INFO    ][5297] The service haproxy is already running
2019-01-10 09:51:13,883 [salt.state       :1951][INFO    ][5297] Completed state [haproxy] at time 09:51:13.883237 duration_in_ms=40.522
2019-01-10 09:51:13,883 [salt.state       :1780][INFO    ][5297] Running state [haproxy] at time 09:51:13.883698
2019-01-10 09:51:13,884 [salt.state       :1813][INFO    ][5297] Executing state service.mod_watch for [haproxy]
2019-01-10 09:51:13,885 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-01-10 09:51:13,897 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5297] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2019-01-10 09:51:13,922 [salt.state       :300 ][INFO    ][5297] {'haproxy': True}
2019-01-10 09:51:13,923 [salt.state       :1951][INFO    ][5297] Completed state [haproxy] at time 09:51:13.923243 duration_in_ms=39.544
2019-01-10 09:51:13,925 [salt.minion      :1711][INFO    ][5297] Returning information for job: 20190110095102602805
2019-01-10 09:51:15,826 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command service.status with jid 20190110095115827948
2019-01-10 09:51:15,838 [salt.minion      :1432][INFO    ][6449] Starting a new job with PID 6449
2019-01-10 09:51:16,271 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6449] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2019-01-10 09:51:16,288 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6449] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2019-01-10 09:51:16,303 [salt.minion      :1711][INFO    ][6449] Returning information for job: 20190110095115827948
2019-01-10 09:51:17,340 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command service.restart with jid 20190110095117341074
2019-01-10 09:51:17,353 [salt.minion      :1432][INFO    ][6459] Starting a new job with PID 6459
2019-01-10 09:51:17,784 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6459] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2019-01-10 09:51:17,812 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6459] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2019-01-10 09:51:17,843 [salt.minion      :1711][INFO    ][6459] Returning information for job: 20190110095117341074
2019-01-10 10:14:17,493 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110101417486724
2019-01-10 10:14:17,504 [salt.minion      :1432][INFO    ][6509] Starting a new job with PID 6509
2019-01-10 10:14:18,516 [salt.state       :915 ][INFO    ][6509] Loading fresh modules for state activity
2019-01-10 10:14:18,562 [salt.fileclient  :1219][INFO    ][6509] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2019-01-10 10:14:18,587 [salt.fileclient  :1219][INFO    ][6509] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2019-01-10 10:14:18,606 [salt.fileclient  :1219][INFO    ][6509] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2019-01-10 10:14:18,637 [salt.fileclient  :1219][INFO    ][6509] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2019-01-10 10:14:19,264 [salt.state       :1780][INFO    ][6509] Running state [redis-server] at time 10:14:19.264483
2019-01-10 10:14:19,264 [salt.state       :1813][INFO    ][6509] Executing state pkg.installed for [redis-server]
2019-01-10 10:14:19,265 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:14:19,566 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2019-01-10 10:14:19,629 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 10:14:21,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:14:21,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2019-01-10 10:14:23,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:14:23,854 [salt.state       :300 ][INFO    ][6509] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2019-01-10 10:14:23,874 [salt.state       :915 ][INFO    ][6509] Loading fresh modules for state activity
2019-01-10 10:14:23,910 [salt.state       :1951][INFO    ][6509] Completed state [redis-server] at time 10:14:23.910092 duration_in_ms=4645.608
2019-01-10 10:14:23,914 [salt.state       :1780][INFO    ][6509] Running state [vm.overcommit_memory] at time 10:14:23.914211
2019-01-10 10:14:23,914 [salt.state       :1813][INFO    ][6509] Executing state sysctl.present for [vm.overcommit_memory]
2019-01-10 10:14:23,917 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2019-01-10 10:14:23,929 [salt.state       :300 ][INFO    ][6509] {'vm.overcommit_memory': 1}
2019-01-10 10:14:23,929 [salt.state       :1951][INFO    ][6509] Completed state [vm.overcommit_memory] at time 10:14:23.929800 duration_in_ms=15.587
2019-01-10 10:14:23,933 [salt.state       :1780][INFO    ][6509] Running state [/etc/redis/redis.conf] at time 10:14:23.933073
2019-01-10 10:14:23,933 [salt.state       :1813][INFO    ][6509] Executing state file.managed for [/etc/redis/redis.conf]
2019-01-10 10:14:23,963 [salt.fileclient  :1219][INFO    ][6509] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2019-01-10 10:14:24,023 [salt.state       :300 ][INFO    ][6509] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 192.168.10.34
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -284,6 +283,7 @@
 #    and resynchronize with them.
 #
 # replicaof <masterip> <masterport>
+replicaof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the replica to authenticate before
@@ -695,7 +695,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -725,9 +724,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1372,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2019-01-10 10:14:24,023 [salt.state       :1951][INFO    ][6509] Completed state [/etc/redis/redis.conf] at time 10:14:24.023565 duration_in_ms=90.492
2019-01-10 10:14:24,476 [salt.state       :1780][INFO    ][6509] Running state [redis-server] at time 10:14:24.475974
2019-01-10 10:14:24,476 [salt.state       :1813][INFO    ][6509] Executing state service.running for [redis-server]
2019-01-10 10:14:24,477 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2019-01-10 10:14:24,492 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-01-10 10:14:24,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-01-10 10:14:24,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2019-01-10 10:14:24,592 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2019-01-10 10:14:24,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-01-10 10:14:24,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2019-01-10 10:14:24,630 [salt.state       :300 ][INFO    ][6509] {'redis-server': True}
2019-01-10 10:14:24,631 [salt.state       :1951][INFO    ][6509] Completed state [redis-server] at time 10:14:24.631120 duration_in_ms=155.143
2019-01-10 10:14:24,633 [salt.state       :1780][INFO    ][6509] Running state [redis-sentinel] at time 10:14:24.633756
2019-01-10 10:14:24,634 [salt.state       :1813][INFO    ][6509] Executing state pkg.installed for [redis-sentinel]
2019-01-10 10:14:24,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:14:24,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2019-01-10 10:14:27,235 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:14:27,268 [salt.state       :300 ][INFO    ][6509] Made the following changes:
'redis-sentinel' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'

2019-01-10 10:14:27,285 [salt.state       :915 ][INFO    ][6509] Loading fresh modules for state activity
2019-01-10 10:14:27,332 [salt.state       :1951][INFO    ][6509] Completed state [redis-sentinel] at time 10:14:27.332385 duration_in_ms=2698.629
2019-01-10 10:14:27,774 [salt.state       :1780][INFO    ][6509] Running state [/etc/redis/sentinel.conf] at time 10:14:27.774815
2019-01-10 10:14:27,775 [salt.state       :1813][INFO    ][6509] Executing state file.managed for [/etc/redis/sentinel.conf]
2019-01-10 10:14:27,794 [salt.fileclient  :1219][INFO    ][6509] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/sentinel.conf'
2019-01-10 10:14:27,826 [salt.state       :300 ][INFO    ][6509] File changed:
--- 
+++ 
@@ -1,7 +1,3 @@
-# Example sentinel.conf
-
-# *** IMPORTANT ***
-#
 # By default Sentinel will not be reachable from interfaces different than
 # localhost, either use the 'bind' directive to bind to a list of network
 # interfaces, or disable protected mode with "protected-mode no" by
@@ -13,7 +9,7 @@
 # For example you may use one of the following:
 #
 # bind 127.0.0.1 192.168.1.1
-bind 127.0.0.1 ::1
+bind 192.168.10.34
 #
 # protected-mode no
 
@@ -82,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -111,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -119,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -144,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -168,7 +164,7 @@
 # NOTIFICATION SCRIPT
 #
 # sentinel notification-script <master-name> <script-path>
-# 
+#
 # Call the specified notification script for any sentinel event that is
 # generated in the WARNING level (for instance -sdown, -odown, and so forth).
 # This script should notify the system administrator via email, SMS, or any
@@ -192,14 +188,14 @@
 # When the master changed because of a failover a script can be called in
 # order to perform application-specific tasks to notify the clients that the
 # configuration has changed and the master is at a different address.
-# 
+#
 # The following arguments are passed to the script:
 #
 # <master-name> <role> <state> <from-ip> <from-port> <to-ip> <to-port>
 #
 # <state> is currently always "failover"
 # <role> is either "leader" or "observer"
-# 
+#
 # The arguments from-ip, from-port, to-ip, to-port are used to communicate
 # the old address of the master and the new address of the elected replica
 # (now a master).

2019-01-10 10:14:27,833 [salt.state       :1951][INFO    ][6509] Completed state [/etc/redis/sentinel.conf] at time 10:14:27.833160 duration_in_ms=58.344
2019-01-10 10:14:27,833 [salt.state       :1780][INFO    ][6509] Running state [redis-sentinel] at time 10:14:27.833513
2019-01-10 10:14:27,833 [salt.state       :1813][INFO    ][6509] Executing state service.running for [redis-sentinel]
2019-01-10 10:14:27,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2019-01-10 10:14:27,838 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110101427607314
2019-01-10 10:14:27,855 [salt.minion      :1432][INFO    ][7905] Starting a new job with PID 7905
2019-01-10 10:14:27,856 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-01-10 10:14:27,867 [salt.minion      :1711][INFO    ][7905] Returning information for job: 20190110101427607314
2019-01-10 10:14:27,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-01-10 10:14:27,882 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-sentinel.service'] in directory '/root'
2019-01-10 10:14:27,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2019-01-10 10:14:27,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-01-10 10:14:27,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6509] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2019-01-10 10:14:27,997 [salt.state       :300 ][INFO    ][6509] {'redis-sentinel': True}
2019-01-10 10:14:27,997 [salt.state       :1951][INFO    ][6509] Completed state [redis-sentinel] at time 10:14:27.997635 duration_in_ms=164.119
2019-01-10 10:14:28,000 [salt.minion      :1711][INFO    ][6509] Returning information for job: 20190110101417486724
2019-01-10 10:14:30,184 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command test.ping with jid 20190110101430177149
2019-01-10 10:14:30,195 [salt.minion      :1432][INFO    ][7965] Starting a new job with PID 7965
2019-01-10 10:14:30,213 [salt.minion      :1711][INFO    ][7965] Returning information for job: 20190110101430177149
2019-01-10 10:16:38,255 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110101638249346
2019-01-10 10:16:38,266 [salt.minion      :1432][INFO    ][7970] Starting a new job with PID 7970
2019-01-10 10:16:46,051 [salt.state       :915 ][INFO    ][7970] Loading fresh modules for state activity
2019-01-10 10:16:46,099 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2019-01-10 10:16:46,126 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2019-01-10 10:16:46,189 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2019-01-10 10:16:46,216 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2019-01-10 10:16:46,245 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2019-01-10 10:16:46,312 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2019-01-10 10:16:46,379 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2019-01-10 10:16:46,447 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2019-01-10 10:16:46,564 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2019-01-10 10:16:46,621 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2019-01-10 10:16:46,675 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2019-01-10 10:16:46,721 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2019-01-10 10:16:47,357 [salt.state       :1780][INFO    ][7970] Running state [apache2] at time 10:16:47.356961
2019-01-10 10:16:47,357 [salt.state       :1813][INFO    ][7970] Executing state pkg.installed for [apache2]
2019-01-10 10:16:47,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:16:47,668 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2019-01-10 10:16:47,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 10:16:48,324 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110101648318112
2019-01-10 10:16:48,340 [salt.minion      :1432][INFO    ][8299] Starting a new job with PID 8299
2019-01-10 10:16:48,353 [salt.minion      :1711][INFO    ][8299] Returning information for job: 20190110101648318112
2019-01-10 10:16:49,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:16:49,188 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2019-01-10 10:16:54,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:16:54,757 [salt.state       :300 ][INFO    ][7970] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2019-01-10 10:16:54,777 [salt.state       :915 ][INFO    ][7970] Loading fresh modules for state activity
2019-01-10 10:16:54,812 [salt.state       :1951][INFO    ][7970] Completed state [apache2] at time 10:16:54.812417 duration_in_ms=7455.456
2019-01-10 10:16:54,817 [salt.state       :1780][INFO    ][7970] Running state [openssl] at time 10:16:54.817647
2019-01-10 10:16:54,818 [salt.state       :1813][INFO    ][7970] Executing state pkg.installed for [openssl]
2019-01-10 10:16:55,402 [salt.state       :300 ][INFO    ][7970] All specified packages are already installed
2019-01-10 10:16:55,403 [salt.state       :1951][INFO    ][7970] Completed state [openssl] at time 10:16:55.403726 duration_in_ms=586.077
2019-01-10 10:16:55,405 [salt.state       :1780][INFO    ][7970] Running state [a2enmod rewrite] at time 10:16:55.405141
2019-01-10 10:16:55,405 [salt.state       :1813][INFO    ][7970] Executing state cmd.run for [a2enmod rewrite]
2019-01-10 10:16:55,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command 'a2enmod rewrite' in directory '/root'
2019-01-10 10:16:55,456 [salt.state       :300 ][INFO    ][7970] {'pid': 9446, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-01-10 10:16:55,457 [salt.state       :1951][INFO    ][7970] Completed state [a2enmod rewrite] at time 10:16:55.457347 duration_in_ms=52.206
2019-01-10 10:16:55,458 [salt.state       :1780][INFO    ][7970] Running state [libapache2-mod-wsgi] at time 10:16:55.458206
2019-01-10 10:16:55,458 [salt.state       :1813][INFO    ][7970] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-01-10 10:16:55,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:16:55,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2019-01-10 10:16:58,417 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110101658410549
2019-01-10 10:16:58,430 [salt.minion      :1432][INFO    ][9713] Starting a new job with PID 9713
2019-01-10 10:16:58,445 [salt.minion      :1711][INFO    ][9713] Returning information for job: 20190110101658410549
2019-01-10 10:16:59,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:16:59,498 [salt.state       :300 ][INFO    ][7970] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'

2019-01-10 10:16:59,516 [salt.state       :915 ][INFO    ][7970] Loading fresh modules for state activity
2019-01-10 10:16:59,556 [salt.state       :1951][INFO    ][7970] Completed state [libapache2-mod-wsgi] at time 10:16:59.556370 duration_in_ms=4098.163
2019-01-10 10:16:59,559 [salt.state       :1780][INFO    ][7970] Running state [a2enmod wsgi] at time 10:16:59.559115
2019-01-10 10:16:59,559 [salt.state       :1813][INFO    ][7970] Executing state cmd.run for [a2enmod wsgi]
2019-01-10 10:16:59,559 [salt.state       :300 ][INFO    ][7970] /etc/apache2/mods-enabled/wsgi.load exists
2019-01-10 10:16:59,559 [salt.state       :1951][INFO    ][7970] Completed state [a2enmod wsgi] at time 10:16:59.559911 duration_in_ms=0.796
2019-01-10 10:16:59,563 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 10:16:59.563465
2019-01-10 10:16:59,563 [salt.state       :1813][INFO    ][7970] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-01-10 10:16:59,591 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2019-01-10 10:16:59,642 [salt.state       :300 ][INFO    ][7970] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2019-01-10 10:16:59,646 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 10:16:59.646222 duration_in_ms=82.757
2019-01-10 10:16:59,646 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 10:16:59.646624
2019-01-10 10:16:59,647 [salt.state       :1813][INFO    ][7970] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-01-10 10:16:59,647 [salt.state       :300 ][INFO    ][7970] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-01-10 10:16:59,647 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 10:16:59.647953 duration_in_ms=1.329
2019-01-10 10:16:59,648 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 10:16:59.648388
2019-01-10 10:16:59,648 [salt.state       :1813][INFO    ][7970] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-01-10 10:16:59,649 [salt.state       :300 ][INFO    ][7970] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2019-01-10 10:16:59,649 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 10:16:59.649651 duration_in_ms=1.262
2019-01-10 10:16:59,650 [salt.state       :1780][INFO    ][7970] Running state [a2enmod mpm_prefork] at time 10:16:59.650522
2019-01-10 10:16:59,650 [salt.state       :1813][INFO    ][7970] Executing state cmd.run for [a2enmod mpm_prefork]
2019-01-10 10:16:59,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command 'a2enmod mpm_prefork' in directory '/root'
2019-01-10 10:16:59,701 [salt.state       :300 ][INFO    ][7970] {'pid': 9782, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2019-01-10 10:16:59,702 [salt.state       :1951][INFO    ][7970] Completed state [a2enmod mpm_prefork] at time 10:16:59.702249 duration_in_ms=51.727
2019-01-10 10:16:59,702 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 10:16:59.702853
2019-01-10 10:16:59,703 [salt.state       :1813][INFO    ][7970] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-01-10 10:16:59,704 [salt.state       :300 ][INFO    ][7970] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-01-10 10:16:59,704 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 10:16:59.704457 duration_in_ms=1.604
2019-01-10 10:16:59,704 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 10:16:59.704861
2019-01-10 10:16:59,705 [salt.state       :1813][INFO    ][7970] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-01-10 10:16:59,705 [salt.state       :300 ][INFO    ][7970] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2019-01-10 10:16:59,706 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 10:16:59.706145 duration_in_ms=1.284
2019-01-10 10:16:59,708 [salt.state       :1780][INFO    ][7970] Running state [apache_server_service_task] at time 10:16:59.708577
2019-01-10 10:16:59,709 [salt.state       :1813][INFO    ][7970] Executing state test.show_notification for [apache_server_service_task]
2019-01-10 10:16:59,709 [salt.state       :300 ][INFO    ][7970] Running apache.server.service
2019-01-10 10:16:59,709 [salt.state       :1951][INFO    ][7970] Completed state [apache_server_service_task] at time 10:16:59.709930 duration_in_ms=1.353
2019-01-10 10:16:59,710 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/ports.conf] at time 10:16:59.710669
2019-01-10 10:16:59,711 [salt.state       :1813][INFO    ][7970] Executing state file.managed for [/etc/apache2/ports.conf]
2019-01-10 10:16:59,728 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2019-01-10 10:16:59,778 [salt.state       :300 ][INFO    ][7970] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2019-01-10 10:16:59,781 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/ports.conf] at time 10:16:59.781294 duration_in_ms=70.625
2019-01-10 10:16:59,781 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/conf-available/security.conf] at time 10:16:59.781910
2019-01-10 10:16:59,782 [salt.state       :1813][INFO    ][7970] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-01-10 10:16:59,797 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2019-01-10 10:16:59,847 [salt.state       :300 ][INFO    ][7970] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2019-01-10 10:16:59,856 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/conf-available/security.conf] at time 10:16:59.856226 duration_in_ms=74.315
2019-01-10 10:17:00,271 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 10:17:00.271355
2019-01-10 10:17:00,271 [salt.state       :1813][INFO    ][7970] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-01-10 10:17:00,272 [salt.state       :300 ][INFO    ][7970] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2019-01-10 10:17:00,272 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 10:17:00.272404 duration_in_ms=1.051
2019-01-10 10:17:00,272 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 10:17:00.272809
2019-01-10 10:17:00,273 [salt.state       :1813][INFO    ][7970] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-01-10 10:17:00,290 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2019-01-10 10:17:00,313 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2019-01-10 10:17:00,365 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2019-01-10 10:17:00,386 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2019-01-10 10:17:00,457 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2019-01-10 10:17:00,473 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2019-01-10 10:17:00,497 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2019-01-10 10:17:00,506 [salt.state       :300 ][INFO    ][7970] File changed:
New file
2019-01-10 10:17:00,506 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 10:17:00.506634 duration_in_ms=233.824
2019-01-10 10:17:00,507 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 10:17:00.507003
2019-01-10 10:17:00,507 [salt.state       :1813][INFO    ][7970] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-01-10 10:17:00,689 [salt.state       :300 ][INFO    ][7970] File changed:
New file
2019-01-10 10:17:00,689 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 10:17:00.689515 duration_in_ms=182.512
2019-01-10 10:17:00,691 [salt.state       :1780][INFO    ][7970] Running state [apache2] at time 10:17:00.691125
2019-01-10 10:17:00,691 [salt.state       :1813][INFO    ][7970] Executing state service.running for [apache2]
2019-01-10 10:17:00,691 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-01-10 10:17:00,709 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:17:00,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:17:00,739 [salt.state       :300 ][INFO    ][7970] The service apache2 is already running
2019-01-10 10:17:00,739 [salt.state       :1951][INFO    ][7970] Completed state [apache2] at time 10:17:00.739592 duration_in_ms=48.465
2019-01-10 10:17:00,740 [salt.state       :1780][INFO    ][7970] Running state [apache2] at time 10:17:00.740097
2019-01-10 10:17:00,740 [salt.state       :1813][INFO    ][7970] Executing state service.mod_watch for [apache2]
2019-01-10 10:17:00,741 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:17:00,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2019-01-10 10:17:00,908 [salt.state       :300 ][INFO    ][7970] {'apache2': True}
2019-01-10 10:17:00,909 [salt.state       :1951][INFO    ][7970] Completed state [apache2] at time 10:17:00.909356 duration_in_ms=169.258
2019-01-10 10:17:00,910 [salt.state       :1780][INFO    ][7970] Running state [/etc/apache2/conf-enabled/security.conf] at time 10:17:00.910291
2019-01-10 10:17:00,910 [salt.state       :1813][INFO    ][7970] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-01-10 10:17:00,915 [salt.state       :300 ][INFO    ][7970] {'new': '/etc/apache2/conf-enabled/security.conf'}
2019-01-10 10:17:00,915 [salt.state       :1951][INFO    ][7970] Completed state [/etc/apache2/conf-enabled/security.conf] at time 10:17:00.915646 duration_in_ms=5.355
2019-01-10 10:17:00,917 [salt.state       :1780][INFO    ][7970] Running state [gnocchi-common] at time 10:17:00.917494
2019-01-10 10:17:00,917 [salt.state       :1813][INFO    ][7970] Executing state pkg.installed for [gnocchi-common]
2019-01-10 10:17:01,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:17:01,142 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2019-01-10 10:17:08,514 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110101708508449
2019-01-10 10:17:08,526 [salt.minion      :1432][INFO    ][11554] Starting a new job with PID 11554
2019-01-10 10:17:08,542 [salt.minion      :1711][INFO    ][11554] Returning information for job: 20190110101708508449
2019-01-10 10:17:18,605 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110101718597679
2019-01-10 10:17:18,615 [salt.minion      :1432][INFO    ][12541] Starting a new job with PID 12541
2019-01-10 10:17:18,629 [salt.minion      :1711][INFO    ][12541] Returning information for job: 20190110101718597679
2019-01-10 10:17:22,640 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:17:22,677 [salt.state       :300 ][INFO    ][7970] Made the following changes:
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-os-service-types' changed from 'absent' to '1.3.0-1~u16.04+mcp'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-editor' changed from 'absent' to '0.4-2'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~u16.04+mcp'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.40.0-1~u16.04+mcp'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'liblapack.so.3' changed from 'absent' to '1'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.21.0-1~u16.04+mcp'
'python-oslo.cache' changed from 'absent' to '1.30.1-1~u16.04+mcp6'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python-lxml' changed from 'absent' to '3.5.0-1ubuntu0.1'
'python-oslo.config' changed from 'absent' to '1:6.4.0-1~u16.04+mcp'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'python2.7-testscenarios' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.27.0-1~u16.04+mcp'
'python-oslo.utils' changed from 'absent' to '3.36.4-1~u16.04+mcp'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.21.0-1~u16.04+mcp'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python2.7-simplejson' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.39.0-1~u16.04+mcp'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-pbr' changed from 'absent' to '4.2.0-4~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.3.0-1~u16.04+mcp'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp4'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-keystoneclient' changed from 'absent' to '1:3.17.0-1~u16.04+mcp4'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystoneauth1' changed from 'absent' to '3.10.0-1~u16.04+mcp10'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp8'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2019-01-10 10:17:22,697 [salt.state       :915 ][INFO    ][7970] Loading fresh modules for state activity
2019-01-10 10:17:22,740 [salt.state       :1951][INFO    ][7970] Completed state [gnocchi-common] at time 10:17:22.740389 duration_in_ms=21822.894
2019-01-10 10:17:22,742 [salt.state       :1780][INFO    ][7970] Running state [gnocchi_ssl_mysql] at time 10:17:22.742885
2019-01-10 10:17:22,743 [salt.state       :1813][INFO    ][7970] Executing state test.show_notification for [gnocchi_ssl_mysql]
2019-01-10 10:17:22,743 [salt.state       :300 ][INFO    ][7970] Running gnocchi._ssl.mysql
2019-01-10 10:17:22,743 [salt.state       :1951][INFO    ][7970] Completed state [gnocchi_ssl_mysql] at time 10:17:22.743584 duration_in_ms=0.699
2019-01-10 10:17:22,745 [salt.state       :1780][INFO    ][7970] Running state [/etc/gnocchi/gnocchi.conf] at time 10:17:22.745546
2019-01-10 10:17:22,745 [salt.state       :1813][INFO    ][7970] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2019-01-10 10:17:22,768 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2019-01-10 10:17:22,851 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2019-01-10 10:17:22,869 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2019-01-10 10:17:22,900 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2019-01-10 10:17:22,933 [salt.fileclient  :1219][INFO    ][7970] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2019-01-10 10:17:22,939 [salt.state       :300 ][INFO    ][7970] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.34:6379

2019-01-10 10:17:22,947 [salt.state       :1951][INFO    ][7970] Completed state [/etc/gnocchi/gnocchi.conf] at time 10:17:22.947455 duration_in_ms=201.909
2019-01-10 10:17:22,951 [salt.state       :1780][INFO    ][7970] Running state [gnocchi-api] at time 10:17:22.951343
2019-01-10 10:17:22,951 [salt.state       :1813][INFO    ][7970] Executing state pkg.installed for [gnocchi-api]
2019-01-10 10:17:24,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:17:24,202 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2019-01-10 10:17:28,692 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110101728686176
2019-01-10 10:17:28,705 [salt.minion      :1432][INFO    ][13656] Starting a new job with PID 13656
2019-01-10 10:17:28,720 [salt.minion      :1711][INFO    ][13656] Returning information for job: 20190110101728686176
2019-01-10 10:17:29,750 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:17:29,795 [salt.state       :300 ][INFO    ][7970] Made the following changes:
'python-novaclient' changed from 'absent' to '2:11.0.0-2~u16.04+mcp13'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.11.1-2~u16.04+mcp'
'python-openstacksdk' changed from 'absent' to '0.17.2-2~u16.04+mcp'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'python-glanceclient' changed from 'absent' to '1:2.13.0-3~u16.04+mcp3'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.16.1-3~u16.04+mcp8'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-cinderclient' changed from 'absent' to '1:4.0.1-1~u16.04+mcp4'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.9.1-1~u16.04+mcp4'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'

2019-01-10 10:17:29,817 [salt.state       :915 ][INFO    ][7970] Loading fresh modules for state activity
2019-01-10 10:17:29,853 [salt.state       :1951][INFO    ][7970] Completed state [gnocchi-api] at time 10:17:29.853626 duration_in_ms=6902.281
2019-01-10 10:17:29,859 [salt.state       :1780][INFO    ][7970] Running state [gnocchi-metricd] at time 10:17:29.859212
2019-01-10 10:17:29,859 [salt.state       :1813][INFO    ][7970] Executing state pkg.installed for [gnocchi-metricd]
2019-01-10 10:17:30,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:17:30,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2019-01-10 10:17:32,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:17:33,003 [salt.state       :300 ][INFO    ][7970] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2019-01-10 10:17:33,029 [salt.state       :915 ][INFO    ][7970] Loading fresh modules for state activity
2019-01-10 10:17:33,208 [salt.state       :1951][INFO    ][7970] Completed state [gnocchi-metricd] at time 10:17:33.208883 duration_in_ms=3349.671
2019-01-10 10:17:33,213 [salt.state       :1780][INFO    ][7970] Running state [python-memcache] at time 10:17:33.213927
2019-01-10 10:17:33,214 [salt.state       :1813][INFO    ][7970] Executing state pkg.installed for [python-memcache]
2019-01-10 10:17:33,866 [salt.state       :300 ][INFO    ][7970] All specified packages are already installed
2019-01-10 10:17:33,867 [salt.state       :1951][INFO    ][7970] Completed state [python-memcache] at time 10:17:33.867285 duration_in_ms=653.356
2019-01-10 10:17:33,869 [salt.state       :1780][INFO    ][7970] Running state [gnocchi-upgrade] at time 10:17:33.868980
2019-01-10 10:17:33,869 [salt.state       :1813][INFO    ][7970] Executing state cmd.run for [gnocchi-upgrade]
2019-01-10 10:17:33,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2019-01-10 10:17:35,501 [salt.state       :300 ][INFO    ][7970] {'pid': 13990, 'retcode': 0, 'stderr': '2019-01-10 10:17:35,010 [13996] INFO     gnocchi.service: Gnocchi version 4.2.4\n2019-01-10 10:17:35,343 [13996] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2019-01-10 10:17:35,439 [13996] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.34,port=6379,db=0>>>\n2019-01-10 10:17:35,440 [13996] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2019-01-10 10:17:35,502 [salt.state       :1951][INFO    ][7970] Completed state [gnocchi-upgrade] at time 10:17:35.502866 duration_in_ms=1633.884
2019-01-10 10:17:35,505 [salt.state       :1780][INFO    ][7970] Running state [wsgi_gnocchi] at time 10:17:35.505257
2019-01-10 10:17:35,505 [salt.state       :1813][INFO    ][7970] Executing state apache_site.enabled for [wsgi_gnocchi]
2019-01-10 10:17:35,506 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2019-01-10 10:17:35,552 [salt.state       :300 ][INFO    ][7970] {'new': 'wsgi_gnocchi', 'old': None}
2019-01-10 10:17:35,553 [salt.state       :1951][INFO    ][7970] Completed state [wsgi_gnocchi] at time 10:17:35.553396 duration_in_ms=48.137
2019-01-10 10:17:35,555 [salt.state       :1780][INFO    ][7970] Running state [apache2] at time 10:17:35.555714
2019-01-10 10:17:35,556 [salt.state       :1813][INFO    ][7970] Executing state service.running for [apache2]
2019-01-10 10:17:35,557 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:17:35,570 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:17:35,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2019-01-10 10:17:36,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:17:36,739 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:17:36,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:17:36,771 [salt.state       :300 ][INFO    ][7970] {'apache2': True}
2019-01-10 10:17:36,772 [salt.state       :1951][INFO    ][7970] Completed state [apache2] at time 10:17:36.772211 duration_in_ms=1216.493
2019-01-10 10:17:36,773 [salt.state       :1780][INFO    ][7970] Running state [gnocchi-metricd] at time 10:17:36.773300
2019-01-10 10:17:36,773 [salt.state       :1813][INFO    ][7970] Executing state service.running for [gnocchi-metricd]
2019-01-10 10:17:36,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2019-01-10 10:17:36,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:36,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:36,819 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:36,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:36,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:36,897 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:36,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:37,421 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7970] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2019-01-10 10:17:37,444 [salt.state       :300 ][INFO    ][7970] {'gnocchi-metricd': True}
2019-01-10 10:17:37,444 [salt.state       :1951][INFO    ][7970] Completed state [gnocchi-metricd] at time 10:17:37.444542 duration_in_ms=671.239
2019-01-10 10:17:37,447 [salt.minion      :1711][INFO    ][7970] Returning information for job: 20190110101638249346
2019-01-10 10:17:38,219 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command test.ping with jid 20190110101738212704
2019-01-10 10:17:38,240 [salt.minion      :1432][INFO    ][14267] Starting a new job with PID 14267
2019-01-10 10:17:38,285 [salt.minion      :1711][INFO    ][14267] Returning information for job: 20190110101738212704
2019-01-10 10:18:15,467 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110101815461192
2019-01-10 10:18:15,478 [salt.minion      :1432][INFO    ][14302] Starting a new job with PID 14302
2019-01-10 10:18:23,271 [salt.state       :915 ][INFO    ][14302] Loading fresh modules for state activity
2019-01-10 10:18:23,320 [salt.fileclient  :1219][INFO    ][14302] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2019-01-10 10:18:23,344 [salt.fileclient  :1219][INFO    ][14302] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2019-01-10 10:18:23,887 [salt.fileclient  :1219][INFO    ][14302] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2019-01-10 10:18:23,932 [salt.fileclient  :1219][INFO    ][14302] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2019-01-10 10:18:25,322 [salt.state       :1780][INFO    ][14302] Running state [apache2] at time 10:18:25.322574
2019-01-10 10:18:25,323 [salt.state       :1813][INFO    ][14302] Executing state pkg.installed for [apache2]
2019-01-10 10:18:25,323 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:18:25,545 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110101825538348
2019-01-10 10:18:25,561 [salt.minion      :1432][INFO    ][14341] Starting a new job with PID 14341
2019-01-10 10:18:25,574 [salt.minion      :1711][INFO    ][14341] Returning information for job: 20190110101825538348
2019-01-10 10:18:25,634 [salt.state       :300 ][INFO    ][14302] All specified packages are already installed
2019-01-10 10:18:25,634 [salt.state       :1951][INFO    ][14302] Completed state [apache2] at time 10:18:25.634503 duration_in_ms=311.926
2019-01-10 10:18:25,634 [salt.state       :1780][INFO    ][14302] Running state [openssl] at time 10:18:25.634861
2019-01-10 10:18:25,635 [salt.state       :1813][INFO    ][14302] Executing state pkg.installed for [openssl]
2019-01-10 10:18:25,642 [salt.state       :300 ][INFO    ][14302] All specified packages are already installed
2019-01-10 10:18:25,643 [salt.state       :1951][INFO    ][14302] Completed state [openssl] at time 10:18:25.643043 duration_in_ms=8.182
2019-01-10 10:18:25,643 [salt.state       :1780][INFO    ][14302] Running state [a2enmod rewrite] at time 10:18:25.643556
2019-01-10 10:18:25,643 [salt.state       :1813][INFO    ][14302] Executing state cmd.run for [a2enmod rewrite]
2019-01-10 10:18:25,644 [salt.state       :300 ][INFO    ][14302] /etc/apache2/mods-enabled/rewrite.load exists
2019-01-10 10:18:25,644 [salt.state       :1951][INFO    ][14302] Completed state [a2enmod rewrite] at time 10:18:25.644356 duration_in_ms=0.8
2019-01-10 10:18:25,644 [salt.state       :1780][INFO    ][14302] Running state [libapache2-mod-wsgi] at time 10:18:25.644745
2019-01-10 10:18:25,644 [salt.state       :1813][INFO    ][14302] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-01-10 10:18:25,652 [salt.state       :300 ][INFO    ][14302] All specified packages are already installed
2019-01-10 10:18:25,652 [salt.state       :1951][INFO    ][14302] Completed state [libapache2-mod-wsgi] at time 10:18:25.652806 duration_in_ms=8.061
2019-01-10 10:18:25,653 [salt.state       :1780][INFO    ][14302] Running state [a2enmod wsgi] at time 10:18:25.653182
2019-01-10 10:18:25,653 [salt.state       :1813][INFO    ][14302] Executing state cmd.run for [a2enmod wsgi]
2019-01-10 10:18:25,653 [salt.state       :300 ][INFO    ][14302] /etc/apache2/mods-enabled/wsgi.load exists
2019-01-10 10:18:25,654 [salt.state       :1951][INFO    ][14302] Completed state [a2enmod wsgi] at time 10:18:25.653996 duration_in_ms=0.814
2019-01-10 10:18:25,659 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 10:18:25.659145
2019-01-10 10:18:25,659 [salt.state       :1813][INFO    ][14302] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-01-10 10:18:25,853 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-01-10 10:18:25,853 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 10:18:25.853260 duration_in_ms=194.115
2019-01-10 10:18:25,853 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 10:18:25.853464
2019-01-10 10:18:25,853 [salt.state       :1813][INFO    ][14302] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-01-10 10:18:25,853 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-01-10 10:18:25,854 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 10:18:25.854086 duration_in_ms=0.622
2019-01-10 10:18:25,854 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 10:18:25.854294
2019-01-10 10:18:25,854 [salt.state       :1813][INFO    ][14302] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-01-10 10:18:25,854 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-01-10 10:18:25,854 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 10:18:25.854866 duration_in_ms=0.572
2019-01-10 10:18:25,855 [salt.state       :1780][INFO    ][14302] Running state [a2enmod mpm_prefork] at time 10:18:25.855442
2019-01-10 10:18:25,855 [salt.state       :1813][INFO    ][14302] Executing state cmd.run for [a2enmod mpm_prefork]
2019-01-10 10:18:25,855 [salt.state       :300 ][INFO    ][14302] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-01-10 10:18:25,856 [salt.state       :1951][INFO    ][14302] Completed state [a2enmod mpm_prefork] at time 10:18:25.856073 duration_in_ms=0.631
2019-01-10 10:18:25,856 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 10:18:25.856255
2019-01-10 10:18:25,856 [salt.state       :1813][INFO    ][14302] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-01-10 10:18:25,856 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-01-10 10:18:25,856 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 10:18:25.856802 duration_in_ms=0.547
2019-01-10 10:18:25,857 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 10:18:25.856979
2019-01-10 10:18:25,857 [salt.state       :1813][INFO    ][14302] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-01-10 10:18:25,857 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-01-10 10:18:25,857 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 10:18:25.857519 duration_in_ms=0.539
2019-01-10 10:18:25,858 [salt.state       :1780][INFO    ][14302] Running state [apache_server_service_task] at time 10:18:25.858192
2019-01-10 10:18:25,858 [salt.state       :1813][INFO    ][14302] Executing state test.show_notification for [apache_server_service_task]
2019-01-10 10:18:25,858 [salt.state       :300 ][INFO    ][14302] Running apache.server.service
2019-01-10 10:18:25,858 [salt.state       :1951][INFO    ][14302] Completed state [apache_server_service_task] at time 10:18:25.858716 duration_in_ms=0.524
2019-01-10 10:18:25,859 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/ports.conf] at time 10:18:25.859063
2019-01-10 10:18:25,859 [salt.state       :1813][INFO    ][14302] Executing state file.managed for [/etc/apache2/ports.conf]
2019-01-10 10:18:25,912 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/ports.conf is in the correct state
2019-01-10 10:18:25,912 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/ports.conf] at time 10:18:25.912313 duration_in_ms=53.249
2019-01-10 10:18:25,912 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/conf-available/security.conf] at time 10:18:25.912659
2019-01-10 10:18:25,912 [salt.state       :1813][INFO    ][14302] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-01-10 10:18:25,965 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/conf-available/security.conf is in the correct state
2019-01-10 10:18:25,965 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/conf-available/security.conf] at time 10:18:25.965451 duration_in_ms=52.792
2019-01-10 10:18:25,970 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 10:18:25.970645
2019-01-10 10:18:25,970 [salt.state       :1813][INFO    ][14302] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-01-10 10:18:25,971 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-01-10 10:18:25,971 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 10:18:25.971277 duration_in_ms=0.632
2019-01-10 10:18:25,971 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 10:18:25.971639
2019-01-10 10:18:25,971 [salt.state       :1813][INFO    ][14302] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-01-10 10:18:26,149 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-01-10 10:18:26,149 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 10:18:26.149393 duration_in_ms=177.754
2019-01-10 10:18:26,149 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 10:18:26.149749
2019-01-10 10:18:26,149 [salt.state       :1813][INFO    ][14302] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-01-10 10:18:26,332 [salt.state       :300 ][INFO    ][14302] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-01-10 10:18:26,332 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 10:18:26.332361 duration_in_ms=182.611
2019-01-10 10:18:26,334 [salt.state       :1780][INFO    ][14302] Running state [apache2] at time 10:18:26.334006
2019-01-10 10:18:26,334 [salt.state       :1813][INFO    ][14302] Executing state service.running for [apache2]
2019-01-10 10:18:26,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-01-10 10:18:26,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:18:26,374 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:18:26,390 [salt.state       :300 ][INFO    ][14302] The service apache2 is already running
2019-01-10 10:18:26,391 [salt.state       :1951][INFO    ][14302] Completed state [apache2] at time 10:18:26.390951 duration_in_ms=56.944
2019-01-10 10:18:26,392 [salt.state       :1780][INFO    ][14302] Running state [/etc/apache2/conf-enabled/security.conf] at time 10:18:26.392175
2019-01-10 10:18:26,392 [salt.state       :1813][INFO    ][14302] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-01-10 10:18:26,395 [salt.state       :300 ][INFO    ][14302] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-01-10 10:18:26,395 [salt.state       :1951][INFO    ][14302] Completed state [/etc/apache2/conf-enabled/security.conf] at time 10:18:26.395736 duration_in_ms=3.561
2019-01-10 10:18:26,396 [salt.state       :1780][INFO    ][14302] Running state [panko-api] at time 10:18:26.396799
2019-01-10 10:18:26,397 [salt.state       :1813][INFO    ][14302] Executing state pkg.installed for [panko-api]
2019-01-10 10:18:26,418 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2019-01-10 10:18:26,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 10:18:27,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:18:27,925 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2019-01-10 10:18:32,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:18:32,341 [salt.state       :300 ][INFO    ][14302] Made the following changes:
'python3-dateutil' changed from 'absent' to '2.6.1-1~u16.04+mcp1'
'python-pankoclient' changed from 'absent' to '0.5.0-2~u16.04+mcp5'
'python3-editor' changed from 'absent' to '0.4-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'python-panko' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'libmatheval1' changed from 'absent' to '1.1.11+dfsg-2'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'panko-common' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python3-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'uwsgi-core' changed from 'absent' to '2.0.12-5ubuntu3.2'
'panko-api' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-oslo.reports' changed from 'absent' to '1.26.0-2~u16.04+mcp'
'python3-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python3-mako' changed from 'absent' to '1.0.3+ds1-1ubuntu1'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'uwsgi-plugin-python' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libjansson4' changed from 'absent' to '2.7-3ubuntu0.1'
'alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'q-text-as-data' changed from 'absent' to '1'

2019-01-10 10:18:32,367 [salt.state       :915 ][INFO    ][14302] Loading fresh modules for state activity
2019-01-10 10:18:32,404 [salt.state       :1951][INFO    ][14302] Completed state [panko-api] at time 10:18:32.404097 duration_in_ms=6007.296
2019-01-10 10:18:32,406 [salt.state       :1780][INFO    ][14302] Running state [panko_ssl_mysql] at time 10:18:32.406827
2019-01-10 10:18:32,407 [salt.state       :1813][INFO    ][14302] Executing state test.show_notification for [panko_ssl_mysql]
2019-01-10 10:18:32,407 [salt.state       :300 ][INFO    ][14302] Running panko._ssl.mysql
2019-01-10 10:18:32,407 [salt.state       :1951][INFO    ][14302] Completed state [panko_ssl_mysql] at time 10:18:32.407626 duration_in_ms=0.799
2019-01-10 10:18:32,410 [salt.state       :1780][INFO    ][14302] Running state [/etc/panko/panko.conf] at time 10:18:32.410450
2019-01-10 10:18:32,411 [salt.state       :1813][INFO    ][14302] Executing state file.managed for [/etc/panko/panko.conf]
2019-01-10 10:18:32,435 [salt.fileclient  :1219][INFO    ][14302] Fetching file from saltenv 'base', ** done ** 'panko/files/rocky/panko.conf.Debian'
2019-01-10 10:18:32,488 [salt.fileclient  :1219][INFO    ][14302] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2019-01-10 10:18:32,508 [salt.fileclient  :1219][INFO    ][14302] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2019-01-10 10:18:32,590 [salt.state       :300 ][INFO    ][14302] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,73 +159,77 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -248,50 +239,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -306,6 +311,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -321,6 +327,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -358,6 +365,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -371,36 +379,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -478,68 +456,115 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2019-01-10 10:18:32,598 [salt.state       :1951][INFO    ][14302] Completed state [/etc/panko/panko.conf] at time 10:18:32.598279 duration_in_ms=187.827
2019-01-10 10:18:32,598 [salt.state       :1780][INFO    ][14302] Running state [panko-dbsync] at time 10:18:32.598746
2019-01-10 10:18:32,598 [salt.state       :1813][INFO    ][14302] Executing state cmd.run for [panko-dbsync]
2019-01-10 10:18:32,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command '/bin/false' in directory '/root'
2019-01-10 10:18:32,626 [salt.state       :300 ][INFO    ][14302] onlyif execution failed
2019-01-10 10:18:32,627 [salt.state       :1951][INFO    ][14302] Completed state [panko-dbsync] at time 10:18:32.627060 duration_in_ms=28.313
2019-01-10 10:18:32,632 [salt.state       :1780][INFO    ][14302] Running state [wsgi_panko] at time 10:18:32.632930
2019-01-10 10:18:32,633 [salt.state       :1813][INFO    ][14302] Executing state apache_site.enabled for [wsgi_panko]
2019-01-10 10:18:32,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2019-01-10 10:18:32,724 [salt.state       :300 ][INFO    ][14302] {'new': 'wsgi_panko', 'old': None}
2019-01-10 10:18:32,724 [salt.state       :1951][INFO    ][14302] Completed state [wsgi_panko] at time 10:18:32.724729 duration_in_ms=91.797
2019-01-10 10:18:33,217 [salt.state       :1780][INFO    ][14302] Running state [apache2] at time 10:18:33.217861
2019-01-10 10:18:33,218 [salt.state       :1813][INFO    ][14302] Executing state service.running for [apache2]
2019-01-10 10:18:33,219 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:18:33,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:18:33,249 [salt.state       :300 ][INFO    ][14302] The service apache2 is already running
2019-01-10 10:18:33,249 [salt.state       :1951][INFO    ][14302] Completed state [apache2] at time 10:18:33.249913 duration_in_ms=32.051
2019-01-10 10:18:33,250 [salt.state       :1780][INFO    ][14302] Running state [apache2] at time 10:18:33.250255
2019-01-10 10:18:33,250 [salt.state       :1813][INFO    ][14302] Executing state service.mod_watch for [apache2]
2019-01-10 10:18:33,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:18:33,264 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14302] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-01-10 10:18:35,502 [salt.state       :300 ][INFO    ][14302] {'apache2': True}
2019-01-10 10:18:35,502 [salt.state       :1951][INFO    ][14302] Completed state [apache2] at time 10:18:35.502821 duration_in_ms=2252.565
2019-01-10 10:18:35,506 [salt.minion      :1711][INFO    ][14302] Returning information for job: 20190110101815461192
2019-01-10 10:18:36,215 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command test.ping with jid 20190110101836209778
2019-01-10 10:18:36,229 [salt.minion      :1432][INFO    ][15405] Starting a new job with PID 15405
2019-01-10 10:18:36,260 [salt.minion      :1711][INFO    ][15405] Returning information for job: 20190110101836209778
2019-01-10 10:21:04,123 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110102104109430
2019-01-10 10:21:04,135 [salt.minion      :1432][INFO    ][15428] Starting a new job with PID 15428
2019-01-10 10:21:11,829 [salt.state       :915 ][INFO    ][15428] Loading fresh modules for state activity
2019-01-10 10:21:11,885 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2019-01-10 10:21:11,914 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2019-01-10 10:21:12,054 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2019-01-10 10:21:12,096 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2019-01-10 10:21:12,145 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2019-01-10 10:21:13,927 [salt.state       :1780][INFO    ][15428] Running state [aodh-api] at time 10:21:13.927312
2019-01-10 10:21:13,928 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [aodh-api]
2019-01-10 10:21:13,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:21:14,220 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102114210822
2019-01-10 10:21:14,235 [salt.minion      :1432][INFO    ][15469] Starting a new job with PID 15469
2019-01-10 10:21:14,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2019-01-10 10:21:14,249 [salt.minion      :1711][INFO    ][15469] Returning information for job: 20190110102114210822
2019-01-10 10:21:14,301 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 10:21:15,725 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:21:15,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2019-01-10 10:21:24,346 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102124332802
2019-01-10 10:21:24,357 [salt.minion      :1432][INFO    ][20936] Starting a new job with PID 20936
2019-01-10 10:21:24,373 [salt.minion      :1711][INFO    ][20936] Returning information for job: 20190110102124332802
2019-01-10 10:21:27,583 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:21:27,638 [salt.state       :300 ][INFO    ][15428] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'build-essential' changed from 'absent' to '12.1ubuntu2'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'aodh-common' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'make:any' changed from 'absent' to '1'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'python2.7-greenlet' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-aodh' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-141.167'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-oslo.messaging' changed from 'absent' to '8.1.0-1~u16.04+mcp1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'c++-compiler' changed from 'absent' to '1'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'libc-dev' changed from 'absent' to '1'
'python-oslo.service' changed from 'absent' to '1.31.6-1~u16.04+mcp3'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'linux-kernel-headers' changed from 'absent' to '1'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2019-01-10 10:21:27,676 [salt.state       :915 ][INFO    ][15428] Loading fresh modules for state activity
2019-01-10 10:21:27,898 [salt.state       :1951][INFO    ][15428] Completed state [aodh-api] at time 10:21:27.898817 duration_in_ms=13971.504
2019-01-10 10:21:27,903 [salt.state       :1780][INFO    ][15428] Running state [aodh-evaluator] at time 10:21:27.903787
2019-01-10 10:21:27,904 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [aodh-evaluator]
2019-01-10 10:21:29,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:21:29,213 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2019-01-10 10:21:32,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:21:32,712 [salt.state       :300 ][INFO    ][15428] Made the following changes:
'aodh-evaluator' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-01-10 10:21:32,749 [salt.state       :915 ][INFO    ][15428] Loading fresh modules for state activity
2019-01-10 10:21:32,832 [salt.state       :1951][INFO    ][15428] Completed state [aodh-evaluator] at time 10:21:32.832317 duration_in_ms=4928.528
2019-01-10 10:21:32,845 [salt.state       :1780][INFO    ][15428] Running state [aodh-notifier] at time 10:21:32.845807
2019-01-10 10:21:32,846 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [aodh-notifier]
2019-01-10 10:21:34,288 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:21:34,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2019-01-10 10:21:34,468 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102134456445
2019-01-10 10:21:34,485 [salt.minion      :1432][INFO    ][21693] Starting a new job with PID 21693
2019-01-10 10:21:34,519 [salt.minion      :1711][INFO    ][21693] Returning information for job: 20190110102134456445
2019-01-10 10:21:36,773 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:21:36,818 [salt.state       :300 ][INFO    ][15428] Made the following changes:
'aodh-notifier' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-01-10 10:21:36,843 [salt.state       :915 ][INFO    ][15428] Loading fresh modules for state activity
2019-01-10 10:21:36,888 [salt.state       :1951][INFO    ][15428] Completed state [aodh-notifier] at time 10:21:36.888332 duration_in_ms=4042.524
2019-01-10 10:21:36,902 [salt.state       :1780][INFO    ][15428] Running state [aodh-listener] at time 10:21:36.902525
2019-01-10 10:21:36,903 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [aodh-listener]
2019-01-10 10:21:37,750 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:21:37,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2019-01-10 10:21:40,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:21:40,393 [salt.state       :300 ][INFO    ][15428] Made the following changes:
'aodh-listener' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2019-01-10 10:21:40,419 [salt.state       :915 ][INFO    ][15428] Loading fresh modules for state activity
2019-01-10 10:21:40,456 [salt.state       :1951][INFO    ][15428] Completed state [aodh-listener] at time 10:21:40.456828 duration_in_ms=3554.302
2019-01-10 10:21:40,462 [salt.state       :1780][INFO    ][15428] Running state [python-aodhclient] at time 10:21:40.462301
2019-01-10 10:21:40,462 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [python-aodhclient]
2019-01-10 10:21:41,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:21:41,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2019-01-10 10:21:43,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:21:43,171 [salt.state       :300 ][INFO    ][15428] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp3'

2019-01-10 10:21:43,198 [salt.state       :915 ][INFO    ][15428] Loading fresh modules for state activity
2019-01-10 10:21:43,239 [salt.state       :1951][INFO    ][15428] Completed state [python-aodhclient] at time 10:21:43.239836 duration_in_ms=2777.535
2019-01-10 10:21:43,246 [salt.state       :1780][INFO    ][15428] Running state [aodh_ssl_mysql] at time 10:21:43.246226
2019-01-10 10:21:43,246 [salt.state       :1813][INFO    ][15428] Executing state test.show_notification for [aodh_ssl_mysql]
2019-01-10 10:21:43,246 [salt.state       :300 ][INFO    ][15428] Running aodh._ssl.mysql
2019-01-10 10:21:43,247 [salt.state       :1951][INFO    ][15428] Completed state [aodh_ssl_mysql] at time 10:21:43.246966 duration_in_ms=0.74
2019-01-10 10:21:43,247 [salt.state       :1780][INFO    ][15428] Running state [aodh_ssl_rabbitmq] at time 10:21:43.247392
2019-01-10 10:21:43,247 [salt.state       :1813][INFO    ][15428] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2019-01-10 10:21:43,247 [salt.state       :300 ][INFO    ][15428] Running aodh._ssl.rabbitmq
2019-01-10 10:21:43,249 [salt.state       :1951][INFO    ][15428] Completed state [aodh_ssl_rabbitmq] at time 10:21:43.249800 duration_in_ms=2.408
2019-01-10 10:21:43,250 [salt.state       :1780][INFO    ][15428] Running state [/etc/aodh/aodh.conf] at time 10:21:43.250772
2019-01-10 10:21:43,251 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/aodh/aodh.conf]
2019-01-10 10:21:43,285 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/aodh.conf.Debian'
2019-01-10 10:21:43,352 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2019-01-10 10:21:43,441 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2019-01-10 10:21:43,458 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2019-01-10 10:21:43,485 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2019-01-10 10:21:43,527 [salt.state       :300 ][INFO    ][15428] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.34
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-rFNLA3/aodh-7.0.0/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,71 +441,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -532,32 +519,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -571,36 +565,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -615,6 +1123,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -630,6 +1139,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -667,6 +1177,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -680,36 +1191,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -787,862 +1268,112 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2019-01-10 10:21:43,528 [salt.state       :1951][INFO    ][15428] Completed state [/etc/aodh/aodh.conf] at time 10:21:43.528737 duration_in_ms=277.964
2019-01-10 10:21:43,529 [salt.state       :1780][INFO    ][15428] Running state [aodh-dbsync] at time 10:21:43.529754
2019-01-10 10:21:43,529 [salt.state       :1813][INFO    ][15428] Executing state cmd.run for [aodh-dbsync]
2019-01-10 10:21:43,532 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command '/bin/false' in directory '/root'
2019-01-10 10:21:43,569 [salt.state       :300 ][INFO    ][15428] onlyif execution failed
2019-01-10 10:21:43,569 [salt.state       :1951][INFO    ][15428] Completed state [aodh-dbsync] at time 10:21:43.569726 duration_in_ms=39.969
2019-01-10 10:21:43,576 [salt.state       :1780][INFO    ][15428] Running state [apache2] at time 10:21:43.576400
2019-01-10 10:21:43,576 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [apache2]
2019-01-10 10:21:44,355 [salt.state       :300 ][INFO    ][15428] All specified packages are already installed
2019-01-10 10:21:44,355 [salt.state       :1951][INFO    ][15428] Completed state [apache2] at time 10:21:44.355820 duration_in_ms=779.419
2019-01-10 10:21:44,356 [salt.state       :1780][INFO    ][15428] Running state [openssl] at time 10:21:44.356242
2019-01-10 10:21:44,356 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [openssl]
2019-01-10 10:21:44,364 [salt.state       :300 ][INFO    ][15428] All specified packages are already installed
2019-01-10 10:21:44,365 [salt.state       :1951][INFO    ][15428] Completed state [openssl] at time 10:21:44.365016 duration_in_ms=8.773
2019-01-10 10:21:44,365 [salt.state       :1780][INFO    ][15428] Running state [a2enmod rewrite] at time 10:21:44.365746
2019-01-10 10:21:44,366 [salt.state       :1813][INFO    ][15428] Executing state cmd.run for [a2enmod rewrite]
2019-01-10 10:21:44,366 [salt.state       :300 ][INFO    ][15428] /etc/apache2/mods-enabled/rewrite.load exists
2019-01-10 10:21:44,366 [salt.state       :1951][INFO    ][15428] Completed state [a2enmod rewrite] at time 10:21:44.366730 duration_in_ms=0.983
2019-01-10 10:21:44,367 [salt.state       :1780][INFO    ][15428] Running state [libapache2-mod-wsgi] at time 10:21:44.367245
2019-01-10 10:21:44,367 [salt.state       :1813][INFO    ][15428] Executing state pkg.installed for [libapache2-mod-wsgi]
2019-01-10 10:21:44,374 [salt.state       :300 ][INFO    ][15428] All specified packages are already installed
2019-01-10 10:21:44,375 [salt.state       :1951][INFO    ][15428] Completed state [libapache2-mod-wsgi] at time 10:21:44.375174 duration_in_ms=7.929
2019-01-10 10:21:44,375 [salt.state       :1780][INFO    ][15428] Running state [a2enmod wsgi] at time 10:21:44.375704
2019-01-10 10:21:44,376 [salt.state       :1813][INFO    ][15428] Executing state cmd.run for [a2enmod wsgi]
2019-01-10 10:21:44,376 [salt.state       :300 ][INFO    ][15428] /etc/apache2/mods-enabled/wsgi.load exists
2019-01-10 10:21:44,376 [salt.state       :1951][INFO    ][15428] Completed state [a2enmod wsgi] at time 10:21:44.376665 duration_in_ms=0.961
2019-01-10 10:21:44,378 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 10:21:44.378595
2019-01-10 10:21:44,378 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2019-01-10 10:21:44,435 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2019-01-10 10:21:44,435 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 10:21:44.435880 duration_in_ms=57.283
2019-01-10 10:21:44,436 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 10:21:44.436202
2019-01-10 10:21:44,436 [salt.state       :1813][INFO    ][15428] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2019-01-10 10:21:44,436 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2019-01-10 10:21:44,437 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 10:21:44.437196 duration_in_ms=0.994
2019-01-10 10:21:44,437 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 10:21:44.437480
2019-01-10 10:21:44,437 [salt.state       :1813][INFO    ][15428] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2019-01-10 10:21:44,438 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/mods-enabled/mpm_event.load is not present
2019-01-10 10:21:44,438 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 10:21:44.438353 duration_in_ms=0.873
2019-01-10 10:21:44,439 [salt.state       :1780][INFO    ][15428] Running state [a2enmod mpm_prefork] at time 10:21:44.439165
2019-01-10 10:21:44,439 [salt.state       :1813][INFO    ][15428] Executing state cmd.run for [a2enmod mpm_prefork]
2019-01-10 10:21:44,439 [salt.state       :300 ][INFO    ][15428] /etc/apache2/mods-enabled/mpm_prefork.load exists
2019-01-10 10:21:44,440 [salt.state       :1951][INFO    ][15428] Completed state [a2enmod mpm_prefork] at time 10:21:44.440153 duration_in_ms=0.988
2019-01-10 10:21:44,440 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 10:21:44.440450
2019-01-10 10:21:44,440 [salt.state       :1813][INFO    ][15428] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2019-01-10 10:21:44,441 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2019-01-10 10:21:44,441 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 10:21:44.441319 duration_in_ms=0.869
2019-01-10 10:21:44,441 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 10:21:44.441620
2019-01-10 10:21:44,441 [salt.state       :1813][INFO    ][15428] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2019-01-10 10:21:44,442 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2019-01-10 10:21:44,442 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 10:21:44.442481 duration_in_ms=0.861
2019-01-10 10:21:44,442 [salt.state       :1780][INFO    ][15428] Running state [apache_server_service_task] at time 10:21:44.442768
2019-01-10 10:21:44,443 [salt.state       :1813][INFO    ][15428] Executing state test.show_notification for [apache_server_service_task]
2019-01-10 10:21:44,443 [salt.state       :300 ][INFO    ][15428] Running apache.server.service
2019-01-10 10:21:44,443 [salt.state       :1951][INFO    ][15428] Completed state [apache_server_service_task] at time 10:21:44.443624 duration_in_ms=0.856
2019-01-10 10:21:44,444 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/ports.conf] at time 10:21:44.444172
2019-01-10 10:21:44,444 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/apache2/ports.conf]
2019-01-10 10:21:44,495 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/ports.conf is in the correct state
2019-01-10 10:21:44,495 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/ports.conf] at time 10:21:44.495907 duration_in_ms=51.733
2019-01-10 10:21:44,496 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/conf-available/security.conf] at time 10:21:44.496522
2019-01-10 10:21:44,496 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2019-01-10 10:21:44,554 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/conf-available/security.conf is in the correct state
2019-01-10 10:21:44,555 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/conf-available/security.conf] at time 10:21:44.554986 duration_in_ms=58.463
2019-01-10 10:21:44,561 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 10:21:44.561736
2019-01-10 10:21:44,562 [salt.state       :1813][INFO    ][15428] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2019-01-10 10:21:44,562 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/sites-enabled/000-default.conf is not present
2019-01-10 10:21:44,562 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 10:21:44.562682 duration_in_ms=0.946
2019-01-10 10:21:44,563 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 10:21:44.563210
2019-01-10 10:21:44,563 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2019-01-10 10:21:44,598 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102144586412
2019-01-10 10:21:44,615 [salt.minion      :1432][INFO    ][22409] Starting a new job with PID 22409
2019-01-10 10:21:44,629 [salt.minion      :1711][INFO    ][22409] Returning information for job: 20190110102144586412
2019-01-10 10:21:44,746 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2019-01-10 10:21:44,746 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 10:21:44.746507 duration_in_ms=183.296
2019-01-10 10:21:44,747 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 10:21:44.747132
2019-01-10 10:21:44,747 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2019-01-10 10:21:44,921 [salt.state       :300 ][INFO    ][15428] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2019-01-10 10:21:44,921 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 10:21:44.921436 duration_in_ms=174.304
2019-01-10 10:21:44,923 [salt.state       :1780][INFO    ][15428] Running state [apache2] at time 10:21:44.923695
2019-01-10 10:21:44,924 [salt.state       :1813][INFO    ][15428] Executing state service.running for [apache2]
2019-01-10 10:21:44,924 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2019-01-10 10:21:44,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:21:44,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:21:44,968 [salt.state       :300 ][INFO    ][15428] The service apache2 is already running
2019-01-10 10:21:44,968 [salt.state       :1951][INFO    ][15428] Completed state [apache2] at time 10:21:44.968688 duration_in_ms=44.99
2019-01-10 10:21:44,969 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/conf-enabled/security.conf] at time 10:21:44.969844
2019-01-10 10:21:44,970 [salt.state       :1813][INFO    ][15428] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2019-01-10 10:21:44,972 [salt.state       :300 ][INFO    ][15428] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2019-01-10 10:21:44,972 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/conf-enabled/security.conf] at time 10:21:44.972672 duration_in_ms=2.828
2019-01-10 10:21:44,973 [salt.state       :1780][INFO    ][15428] Running state [/etc/default/aodh-evaluator] at time 10:21:44.973360
2019-01-10 10:21:44,973 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/default/aodh-evaluator]
2019-01-10 10:21:44,991 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2019-01-10 10:21:45,001 [salt.state       :300 ][INFO    ][15428] File changed:
New file
2019-01-10 10:21:45,002 [salt.state       :1951][INFO    ][15428] Completed state [/etc/default/aodh-evaluator] at time 10:21:45.002059 duration_in_ms=28.699
2019-01-10 10:21:45,002 [salt.state       :1780][INFO    ][15428] Running state [/etc/default/aodh-notifier] at time 10:21:45.002629
2019-01-10 10:21:45,002 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/default/aodh-notifier]
2019-01-10 10:21:45,020 [salt.state       :300 ][INFO    ][15428] File changed:
New file
2019-01-10 10:21:45,021 [salt.state       :1951][INFO    ][15428] Completed state [/etc/default/aodh-notifier] at time 10:21:45.021248 duration_in_ms=18.618
2019-01-10 10:21:45,021 [salt.state       :1780][INFO    ][15428] Running state [/etc/default/aodh-listener] at time 10:21:45.021863
2019-01-10 10:21:45,022 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/default/aodh-listener]
2019-01-10 10:21:45,041 [salt.state       :300 ][INFO    ][15428] File changed:
New file
2019-01-10 10:21:45,041 [salt.state       :1951][INFO    ][15428] Completed state [/etc/default/aodh-listener] at time 10:21:45.041614 duration_in_ms=19.751
2019-01-10 10:21:45,042 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 10:21:45.042195
2019-01-10 10:21:45,042 [salt.state       :1813][INFO    ][15428] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2019-01-10 10:21:45,056 [salt.fileclient  :1219][INFO    ][15428] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/apache-aodh.apache2.conf.Debian'
2019-01-10 10:21:45,089 [salt.state       :300 ][INFO    ][15428] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.34:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2019-01-10 10:21:45,091 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 10:21:45.091531 duration_in_ms=49.334
2019-01-10 10:21:45,091 [salt.state       :1780][INFO    ][15428] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 10:21:45.091802
2019-01-10 10:21:45,092 [salt.state       :1813][INFO    ][15428] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2019-01-10 10:21:45,093 [salt.state       :300 ][INFO    ][15428] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2019-01-10 10:21:45,093 [salt.state       :1951][INFO    ][15428] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 10:21:45.093610 duration_in_ms=1.808
2019-01-10 10:21:45,094 [salt.state       :1780][INFO    ][15428] Running state [apache2] at time 10:21:45.094523
2019-01-10 10:21:45,094 [salt.state       :1813][INFO    ][15428] Executing state service.running for [apache2]
2019-01-10 10:21:45,095 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:21:45,110 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2019-01-10 10:21:45,126 [salt.state       :300 ][INFO    ][15428] The service apache2 is already running
2019-01-10 10:21:45,127 [salt.state       :1951][INFO    ][15428] Completed state [apache2] at time 10:21:45.127005 duration_in_ms=32.48
2019-01-10 10:21:45,127 [salt.state       :1780][INFO    ][15428] Running state [apache2] at time 10:21:45.127387
2019-01-10 10:21:45,127 [salt.state       :1813][INFO    ][15428] Executing state service.mod_watch for [apache2]
2019-01-10 10:21:45,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2019-01-10 10:21:45,144 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2019-01-10 10:21:47,424 [salt.state       :300 ][INFO    ][15428] {'apache2': True}
2019-01-10 10:21:47,425 [salt.state       :1951][INFO    ][15428] Completed state [apache2] at time 10:21:47.425162 duration_in_ms=2297.774
2019-01-10 10:21:47,427 [salt.state       :1780][INFO    ][15428] Running state [aodh-evaluator] at time 10:21:47.427912
2019-01-10 10:21:47,428 [salt.state       :1813][INFO    ][15428] Executing state service.running for [aodh-evaluator]
2019-01-10 10:21:47,429 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2019-01-10 10:21:47,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-01-10 10:21:47,473 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2019-01-10 10:21:47,486 [salt.state       :300 ][INFO    ][15428] The service aodh-evaluator is already running
2019-01-10 10:21:47,487 [salt.state       :1951][INFO    ][15428] Completed state [aodh-evaluator] at time 10:21:47.487476 duration_in_ms=59.561
2019-01-10 10:21:47,487 [salt.state       :1780][INFO    ][15428] Running state [aodh-evaluator] at time 10:21:47.487927
2019-01-10 10:21:47,488 [salt.state       :1813][INFO    ][15428] Executing state service.mod_watch for [aodh-evaluator]
2019-01-10 10:21:47,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2019-01-10 10:21:47,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2019-01-10 10:21:47,656 [salt.state       :300 ][INFO    ][15428] {'aodh-evaluator': True}
2019-01-10 10:21:47,656 [salt.state       :1951][INFO    ][15428] Completed state [aodh-evaluator] at time 10:21:47.656905 duration_in_ms=168.976
2019-01-10 10:21:47,658 [salt.state       :1780][INFO    ][15428] Running state [aodh-notifier] at time 10:21:47.658862
2019-01-10 10:21:47,660 [salt.state       :1813][INFO    ][15428] Executing state service.running for [aodh-notifier]
2019-01-10 10:21:47,661 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2019-01-10 10:21:47,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-01-10 10:21:47,709 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2019-01-10 10:21:47,737 [salt.state       :300 ][INFO    ][15428] The service aodh-notifier is already running
2019-01-10 10:21:47,738 [salt.state       :1951][INFO    ][15428] Completed state [aodh-notifier] at time 10:21:47.738032 duration_in_ms=79.167
2019-01-10 10:21:47,738 [salt.state       :1780][INFO    ][15428] Running state [aodh-notifier] at time 10:21:47.738461
2019-01-10 10:21:47,738 [salt.state       :1813][INFO    ][15428] Executing state service.mod_watch for [aodh-notifier]
2019-01-10 10:21:47,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2019-01-10 10:21:47,765 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2019-01-10 10:21:54,730 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102154717919
2019-01-10 10:21:54,741 [salt.minion      :1432][INFO    ][22678] Starting a new job with PID 22678
2019-01-10 10:21:54,755 [salt.minion      :1711][INFO    ][22678] Returning information for job: 20190110102154717919
2019-01-10 10:22:02,800 [salt.state       :300 ][INFO    ][15428] {'aodh-notifier': True}
2019-01-10 10:22:02,800 [salt.state       :1951][INFO    ][15428] Completed state [aodh-notifier] at time 10:22:02.800736 duration_in_ms=15062.273
2019-01-10 10:22:02,804 [salt.state       :1780][INFO    ][15428] Running state [aodh-listener] at time 10:22:02.804342
2019-01-10 10:22:02,806 [salt.state       :1813][INFO    ][15428] Executing state service.running for [aodh-listener]
2019-01-10 10:22:02,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2019-01-10 10:22:02,833 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-01-10 10:22:02,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2019-01-10 10:22:02,863 [salt.state       :300 ][INFO    ][15428] The service aodh-listener is already running
2019-01-10 10:22:02,864 [salt.state       :1951][INFO    ][15428] Completed state [aodh-listener] at time 10:22:02.864367 duration_in_ms=60.023
2019-01-10 10:22:02,864 [salt.state       :1780][INFO    ][15428] Running state [aodh-listener] at time 10:22:02.864723
2019-01-10 10:22:02,865 [salt.state       :1813][INFO    ][15428] Executing state service.mod_watch for [aodh-listener]
2019-01-10 10:22:02,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2019-01-10 10:22:02,880 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15428] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2019-01-10 10:22:04,834 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102204827308
2019-01-10 10:22:04,845 [salt.minion      :1432][INFO    ][22741] Starting a new job with PID 22741
2019-01-10 10:22:04,859 [salt.minion      :1711][INFO    ][22741] Returning information for job: 20190110102204827308
2019-01-10 10:22:14,969 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102214955710
2019-01-10 10:22:14,980 [salt.minion      :1432][INFO    ][22746] Starting a new job with PID 22746
2019-01-10 10:22:14,993 [salt.minion      :1711][INFO    ][22746] Returning information for job: 20190110102214955710
2019-01-10 10:22:18,054 [salt.state       :300 ][INFO    ][15428] {'aodh-listener': True}
2019-01-10 10:22:18,054 [salt.state       :1951][INFO    ][15428] Completed state [aodh-listener] at time 10:22:18.054842 duration_in_ms=15190.117
2019-01-10 10:22:18,063 [salt.minion      :1711][INFO    ][15428] Returning information for job: 20190110102104109430
2019-01-10 10:22:18,810 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command state.sls with jid 20190110102218803474
2019-01-10 10:22:18,824 [salt.minion      :1432][INFO    ][22790] Starting a new job with PID 22790
2019-01-10 10:22:26,802 [salt.state       :915 ][INFO    ][22790] Loading fresh modules for state activity
2019-01-10 10:22:26,851 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2019-01-10 10:22:26,878 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2019-01-10 10:22:27,011 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2019-01-10 10:22:28,538 [salt.state       :1780][INFO    ][22790] Running state [ceilometer-agent-central] at time 10:22:28.538329
2019-01-10 10:22:28,539 [salt.state       :1813][INFO    ][22790] Executing state pkg.installed for [ceilometer-agent-central]
2019-01-10 10:22:28,539 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:22:28,882 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2019-01-10 10:22:28,921 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102228914037
2019-01-10 10:22:28,936 [salt.minion      :1432][INFO    ][22819] Starting a new job with PID 22819
2019-01-10 10:22:28,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2019-01-10 10:22:28,950 [salt.minion      :1711][INFO    ][22819] Returning information for job: 20190110102228914037
2019-01-10 10:22:30,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:22:30,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2019-01-10 10:22:39,117 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102239108250
2019-01-10 10:22:39,133 [salt.minion      :1432][INFO    ][24921] Starting a new job with PID 24921
2019-01-10 10:22:39,153 [salt.minion      :1711][INFO    ][24921] Returning information for job: 20190110102239108250
2019-01-10 10:22:45,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:22:45,629 [salt.state       :300 ][INFO    ][22790] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-pysmi' changed from 'absent' to '0.2.2-2~u16.04+mcp'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.4'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.4.3-1~u16.04+mcp'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-oslo-rootwrap' changed from 'absent' to '1'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-pycryptodome' changed from 'absent' to '3.4.7-1.1~u16.04+mcp'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2019-01-10 10:22:45,658 [salt.state       :915 ][INFO    ][22790] Loading fresh modules for state activity
2019-01-10 10:22:45,834 [salt.state       :1951][INFO    ][22790] Completed state [ceilometer-agent-central] at time 10:22:45.834107 duration_in_ms=17295.779
2019-01-10 10:22:45,839 [salt.state       :1780][INFO    ][22790] Running state [python-ceilometerclient] at time 10:22:45.839532
2019-01-10 10:22:45,839 [salt.state       :1813][INFO    ][22790] Executing state pkg.installed for [python-ceilometerclient]
2019-01-10 10:22:46,499 [salt.state       :300 ][INFO    ][22790] All specified packages are already installed
2019-01-10 10:22:46,499 [salt.state       :1951][INFO    ][22790] Completed state [python-ceilometerclient] at time 10:22:46.499869 duration_in_ms=660.337
2019-01-10 10:22:46,500 [salt.state       :1780][INFO    ][22790] Running state [ceilometer-agent-notification] at time 10:22:46.500254
2019-01-10 10:22:46,500 [salt.state       :1813][INFO    ][22790] Executing state pkg.installed for [ceilometer-agent-notification]
2019-01-10 10:22:46,524 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2019-01-10 10:22:46,550 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2019-01-10 10:22:49,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2019-01-10 10:22:49,159 [salt.state       :300 ][INFO    ][22790] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'

2019-01-10 10:22:49,179 [salt.state       :915 ][INFO    ][22790] Loading fresh modules for state activity
2019-01-10 10:22:49,211 [salt.state       :1951][INFO    ][22790] Completed state [ceilometer-agent-notification] at time 10:22:49.210967 duration_in_ms=2710.713
2019-01-10 10:22:49,213 [salt.state       :1780][INFO    ][22790] Running state [ceilometer_ssl_rabbitmq] at time 10:22:49.213391
2019-01-10 10:22:49,213 [salt.state       :1813][INFO    ][22790] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2019-01-10 10:22:49,214 [salt.state       :300 ][INFO    ][22790] Running ceilometer._ssl.rabbitmq
2019-01-10 10:22:49,214 [salt.state       :1951][INFO    ][22790] Completed state [ceilometer_ssl_rabbitmq] at time 10:22:49.214632 duration_in_ms=1.241
2019-01-10 10:22:49,216 [salt.state       :1780][INFO    ][22790] Running state [/etc/ceilometer/ceilometer.conf] at time 10:22:49.216723
2019-01-10 10:22:49,217 [salt.state       :1813][INFO    ][22790] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2019-01-10 10:22:49,263 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/ceilometer-server.conf.Debian'
2019-01-10 10:22:49,513 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2019-01-10 10:22:49,546 [salt.state       :300 ][INFO    ][22790] File changed:
--- 
+++ 
@@ -1,15 +1,329 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: To reduce polling agent load, samples are sent to the
-# notification agent in a batch. To gain higher throughput at the cost of load
-# set this to False. This option is deprecated, to disable batching set
-# batch_size = 0 in the polling group. (boolean value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
 #batch_polled_samples = true
 
 # Inspector to use for inspecting the hypervisor layer. Known inspectors are
@@ -70,372 +384,6 @@
 # Minimum value: 1
 #max_parallel_requests = 64
 
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
 
 [coordination]
 
@@ -448,6 +396,7 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
@@ -529,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -593,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-DqEK8d/ceilometer-11.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -619,6 +522,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -636,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -666,633 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1307,10 +585,6 @@
 # pool with the same partitioning_group_prefix a disjoint subset of pollsters
 # should be loaded. (string value)
 #partitioning_group_prefix = <None>
-
-# Batch size of samples to send to notification agent, Set to 0 to disable
-# (integer value)
-#batch_size = 50
 
 
 [publisher]
@@ -1325,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1357,87 +632,115 @@
 #secret_key = <None>
 
 
-[rgw_client]
-
-#
-# From ceilometer
-#
-
-# Whether RGW uses implicit tenants or not. (boolean value)
-#implicit_tenants = false
-
-
 [service_credentials]
 
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1450,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1485,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (host address value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2019-01-10 10:22:49,565 [salt.state       :1951][INFO    ][22790] Completed state [/etc/ceilometer/ceilometer.conf] at time 10:22:49.565221 duration_in_ms=348.496
2019-01-10 10:22:49,565 [salt.state       :1780][INFO    ][22790] Running state [/etc/default/ceilometer-agent-central] at time 10:22:49.565635
2019-01-10 10:22:49,565 [salt.state       :1813][INFO    ][22790] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2019-01-10 10:22:49,592 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2019-01-10 10:22:49,626 [salt.state       :300 ][INFO    ][22790] File changed:
New file
2019-01-10 10:22:49,626 [salt.state       :1951][INFO    ][22790] Completed state [/etc/default/ceilometer-agent-central] at time 10:22:49.626339 duration_in_ms=60.704
2019-01-10 10:22:49,626 [salt.state       :1780][INFO    ][22790] Running state [/etc/default/ceilometer-agent-notification] at time 10:22:49.626678
2019-01-10 10:22:49,626 [salt.state       :1813][INFO    ][22790] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2019-01-10 10:22:49,659 [salt.state       :300 ][INFO    ][22790] File changed:
New file
2019-01-10 10:22:49,659 [salt.state       :1951][INFO    ][22790] Completed state [/etc/default/ceilometer-agent-notification] at time 10:22:49.659412 duration_in_ms=32.734
2019-01-10 10:22:49,663 [salt.state       :1780][INFO    ][22790] Running state [python-gnocchiclient] at time 10:22:49.663139
2019-01-10 10:22:49,663 [salt.state       :1813][INFO    ][22790] Executing state pkg.latest for [python-gnocchiclient]
2019-01-10 10:22:49,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2019-01-10 10:22:49,864 [salt.state       :300 ][INFO    ][22790] Package python-gnocchiclient is already up-to-date
2019-01-10 10:22:49,865 [salt.state       :1951][INFO    ][22790] Completed state [python-gnocchiclient] at time 10:22:49.865142 duration_in_ms=202.003
2019-01-10 10:22:49,865 [salt.state       :1780][INFO    ][22790] Running state [/etc/ceilometer/pipeline.yaml] at time 10:22:49.865623
2019-01-10 10:22:49,865 [salt.state       :1813][INFO    ][22790] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2019-01-10 10:22:49,912 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/pipeline.yaml'
2019-01-10 10:22:50,073 [salt.state       :300 ][INFO    ][22790] File changed:
New file
2019-01-10 10:22:50,073 [salt.state       :1951][INFO    ][22790] Completed state [/etc/ceilometer/pipeline.yaml] at time 10:22:50.073502 duration_in_ms=207.879
2019-01-10 10:22:50,073 [salt.state       :1780][INFO    ][22790] Running state [/etc/ceilometer/event_pipeline.yaml] at time 10:22:50.073827
2019-01-10 10:22:50,074 [salt.state       :1813][INFO    ][22790] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2019-01-10 10:22:50,096 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_pipeline.yaml'
2019-01-10 10:22:50,212 [salt.state       :300 ][INFO    ][22790] File changed:
New file
2019-01-10 10:22:50,212 [salt.state       :1951][INFO    ][22790] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 10:22:50.212843 duration_in_ms=139.015
2019-01-10 10:22:50,213 [salt.state       :1780][INFO    ][22790] Running state [/etc/ceilometer/event_definitions.yaml] at time 10:22:50.213205
2019-01-10 10:22:50,213 [salt.state       :1813][INFO    ][22790] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2019-01-10 10:22:50,228 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command saltutil.find_job with jid 20190110102249316402
2019-01-10 10:22:50,248 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_definitions.yaml'
2019-01-10 10:22:50,248 [salt.minion      :1432][INFO    ][25667] Starting a new job with PID 25667
2019-01-10 10:22:50,271 [salt.state       :300 ][INFO    ][22790] File changed:
New file
2019-01-10 10:22:50,271 [salt.state       :1951][INFO    ][22790] Completed state [/etc/ceilometer/event_definitions.yaml] at time 10:22:50.271235 duration_in_ms=58.03
2019-01-10 10:22:50,271 [salt.state       :1780][INFO    ][22790] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 10:22:50.271598
2019-01-10 10:22:50,271 [salt.state       :1813][INFO    ][22790] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2019-01-10 10:22:50,276 [salt.minion      :1711][INFO    ][25667] Returning information for job: 20190110102249316402
2019-01-10 10:22:50,295 [salt.fileclient  :1219][INFO    ][22790] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gabbi_pipeline.yaml'
2019-01-10 10:22:50,303 [salt.state       :300 ][INFO    ][22790] File changed:
New file
2019-01-10 10:22:50,304 [salt.state       :1951][INFO    ][22790] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 10:22:50.303986 duration_in_ms=32.387
2019-01-10 10:22:50,783 [salt.state       :1780][INFO    ][22790] Running state [ceilometer-agent-central] at time 10:22:50.783195
2019-01-10 10:22:50,783 [salt.state       :1813][INFO    ][22790] Executing state service.running for [ceilometer-agent-central]
2019-01-10 10:22:50,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2019-01-10 10:22:50,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-10 10:22:50,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-10 10:22:50,828 [salt.state       :300 ][INFO    ][22790] The service ceilometer-agent-central is already running
2019-01-10 10:22:50,828 [salt.state       :1951][INFO    ][22790] Completed state [ceilometer-agent-central] at time 10:22:50.828904 duration_in_ms=45.706
2019-01-10 10:22:50,829 [salt.state       :1780][INFO    ][22790] Running state [ceilometer-agent-central] at time 10:22:50.829147
2019-01-10 10:22:50,829 [salt.state       :1813][INFO    ][22790] Executing state service.mod_watch for [ceilometer-agent-central]
2019-01-10 10:22:50,830 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-10 10:22:50,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2019-01-10 10:22:50,983 [salt.state       :300 ][INFO    ][22790] {'ceilometer-agent-central': True}
2019-01-10 10:22:50,985 [salt.state       :1951][INFO    ][22790] Completed state [ceilometer-agent-central] at time 10:22:50.983926 duration_in_ms=154.778
2019-01-10 10:22:50,986 [salt.state       :1780][INFO    ][22790] Running state [ceilometer-agent-notification] at time 10:22:50.986370
2019-01-10 10:22:50,992 [salt.state       :1813][INFO    ][22790] Executing state service.running for [ceilometer-agent-notification]
2019-01-10 10:22:50,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2019-01-10 10:22:51,012 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-10 10:22:51,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-10 10:22:51,067 [salt.state       :300 ][INFO    ][22790] The service ceilometer-agent-notification is already running
2019-01-10 10:22:51,067 [salt.state       :1951][INFO    ][22790] Completed state [ceilometer-agent-notification] at time 10:22:51.067636 duration_in_ms=81.263
2019-01-10 10:22:51,067 [salt.state       :1780][INFO    ][22790] Running state [ceilometer-agent-notification] at time 10:22:51.067878
2019-01-10 10:22:51,068 [salt.state       :1813][INFO    ][22790] Executing state service.mod_watch for [ceilometer-agent-notification]
2019-01-10 10:22:51,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-10 10:22:51,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22790] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2019-01-10 10:22:51,212 [salt.state       :300 ][INFO    ][22790] {'ceilometer-agent-notification': True}
2019-01-10 10:22:51,212 [salt.state       :1951][INFO    ][22790] Completed state [ceilometer-agent-notification] at time 10:22:51.212902 duration_in_ms=145.02
2019-01-10 10:22:51,226 [salt.minion      :1711][INFO    ][22790] Returning information for job: 20190110102218803474
2019-01-10 10:26:33,704 [salt.minion      :1308][INFO    ][1462] User sudo_ubuntu Executing command cp.push_dir with jid 20190110102633696462
2019-01-10 10:26:33,717 [salt.minion      :1432][INFO    ][25805] Starting a new job with PID 25805
