2018-12-30 10:25:36,419 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,560 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,564 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,568 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,572 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,922 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,925 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,928 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,989 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,994 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,996 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:36,999 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,218 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,342 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,347 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,351 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,355 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,359 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,363 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,366 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,368 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,372 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,375 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,379 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,383 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,387 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,390 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,393 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,397 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,400 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,404 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,408 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,412 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,416 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,420 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,424 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,427 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,431 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,435 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,438 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,441 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,444 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,449 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,453 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,456 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,460 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,464 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,467 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,471 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,475 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,478 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,481 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,484 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,488 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,492 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,495 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:37,500 [salt.utils.decorators:82  ][ERROR   ][1768] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-30 10:25:59,836 [salt.utils.decorators:613 ][WARNING ][1768] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-30 10:26:02,185 [salt.loaded.int.states.file:2298][WARNING ][1768] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:26:04,877 [salt.loaded.int.states.file:2298][WARNING ][1768] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:26:07,224 [salt.loaded.int.states.file:2298][WARNING ][1768] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:26:11,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3006] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-12-30 10:26:11,571 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3006] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-12-30 10:26:11,620 [salt.utils.parsers:1051][WARNING ][1416] Minion received a SIGTERM. Exiting.
2018-12-30 10:26:12,524 [salt.cli.daemons :293 ][INFO    ][3065] Setting up the Salt Minion "mdb02.mcp-ovs-dpdk-ha.local"
2018-12-30 10:26:12,680 [salt.cli.daemons :82  ][INFO    ][3065] Starting up the Salt Minion
2018-12-30 10:26:12,681 [salt.utils.event :1017][INFO    ][3065] Starting pull socket on /var/run/salt/minion/minion_event_7cf34547b8_pull.ipc
2018-12-30 10:26:13,720 [salt.minion      :976 ][INFO    ][3065] Creating minion process manager
2018-12-30 10:26:15,141 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3065] Executing command ['date', '+%z'] in directory '/root'
2018-12-30 10:26:15,175 [salt.utils.schedule:568 ][INFO    ][3065] Updating job settings for scheduled job: __mine_interval
2018-12-30 10:26:15,177 [salt.minion      :1108][INFO    ][3065] Added mine.update to scheduler
2018-12-30 10:26:15,182 [salt.minion      :1975][INFO    ][3065] Minion is starting as user 'root'
2018-12-30 10:26:15,201 [salt.minion      :2336][INFO    ][3065] Minion is ready to receive requests!
2018-12-30 10:26:48,675 [salt.minion      :1308][INFO    ][3065] User sudo_ubuntu Executing command state.apply with jid 20181230102648659790
2018-12-30 10:26:48,700 [salt.minion      :1432][INFO    ][3156] Starting a new job with PID 3156
2018-12-30 10:26:55,176 [salt.state       :915 ][INFO    ][3156] Loading fresh modules for state activity
2018-12-30 10:26:55,611 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-12-30 10:26:55,672 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-12-30 10:26:55,915 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-12-30 10:26:56,052 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-12-30 10:26:56,184 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2018-12-30 10:26:56,319 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2018-12-30 10:26:56,450 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2018-12-30 10:26:56,602 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2018-12-30 10:26:56,760 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-12-30 10:26:56,965 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-12-30 10:26:57,121 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-12-30 10:26:57,253 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-12-30 10:26:57,480 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-12-30 10:26:57,517 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-12-30 10:26:57,638 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-12-30 10:26:57,754 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-12-30 10:26:57,859 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-12-30 10:26:58,387 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-12-30 10:26:58,527 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-12-30 10:26:58,670 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2018-12-30 10:26:58,796 [salt.minion      :1308][INFO    ][3065] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230102658774712
2018-12-30 10:26:58,818 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-12-30 10:26:58,820 [salt.minion      :1432][INFO    ][3203] Starting a new job with PID 3203
2018-12-30 10:26:58,844 [salt.minion      :1711][INFO    ][3203] Returning information for job: 20181230102658774712
2018-12-30 10:26:58,992 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2018-12-30 10:26:59,175 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-12-30 10:26:59,332 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-12-30 10:26:59,490 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-12-30 10:26:59,633 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-12-30 10:26:59,773 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-12-30 10:26:59,978 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-12-30 10:27:00,290 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-12-30 10:27:00,420 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-12-30 10:27:01,072 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2018-12-30 10:27:01,223 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-12-30 10:27:01,250 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-12-30 10:27:01,314 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-12-30 10:27:01,369 [salt.state       :1780][INFO    ][3156] Running state [/etc/environment] at time 10:27:01.369688
2018-12-30 10:27:01,369 [salt.state       :1813][INFO    ][3156] Executing state file.blockreplace for [/etc/environment]
2018-12-30 10:27:01,378 [salt.state       :300 ][INFO    ][3156] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-12-30 10:27:01,378 [salt.state       :1951][INFO    ][3156] Completed state [/etc/environment] at time 10:27:01.378788 duration_in_ms=9.1
2018-12-30 10:27:01,379 [salt.state       :1780][INFO    ][3156] Running state [/etc/profile.d] at time 10:27:01.379380
2018-12-30 10:27:01,379 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/profile.d]
2018-12-30 10:27:01,382 [salt.state       :300 ][INFO    ][3156] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-12-30 10:27:01,382 [salt.state       :1951][INFO    ][3156] Completed state [/etc/profile.d] at time 10:27:01.382700 duration_in_ms=3.617
2018-12-30 10:27:01,383 [salt.state       :1780][INFO    ][3156] Running state [/etc/bash.bashrc] at time 10:27:01.383397
2018-12-30 10:27:01,383 [salt.state       :1813][INFO    ][3156] Executing state file.blockreplace for [/etc/bash.bashrc]
2018-12-30 10:27:02,218 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['git', '--version'] in directory '/root'
2018-12-30 10:27:02,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2018-12-30 10:27:02,482 [salt.state       :300 ][INFO    ][3156] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-12-30 10:27:02,482 [salt.state       :1951][INFO    ][3156] Completed state [/etc/bash.bashrc] at time 10:27:02.482361 duration_in_ms=1098.963
2018-12-30 10:27:02,482 [salt.state       :1780][INFO    ][3156] Running state [/etc/profile] at time 10:27:02.482669
2018-12-30 10:27:02,483 [salt.state       :1813][INFO    ][3156] Executing state file.blockreplace for [/etc/profile]
2018-12-30 10:27:02,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'test -f /etc/profile' in directory '/root'
2018-12-30 10:27:02,531 [salt.state       :300 ][INFO    ][3156] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-12-30 10:27:02,532 [salt.state       :1951][INFO    ][3156] Completed state [/etc/profile] at time 10:27:02.532242 duration_in_ms=49.572
2018-12-30 10:27:02,532 [salt.state       :1780][INFO    ][3156] Running state [/etc/login.defs] at time 10:27:02.532600
2018-12-30 10:27:02,532 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/login.defs]
2018-12-30 10:27:02,567 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2018-12-30 10:27:02,692 [salt.state       :300 ][INFO    ][3156] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2018-12-30 10:27:02,694 [salt.state       :1951][INFO    ][3156] Completed state [/etc/login.defs] at time 10:27:02.694622 duration_in_ms=162.022
2018-12-30 10:27:02,705 [salt.state       :1780][INFO    ][3156] Running state [at] at time 10:27:02.705022
2018-12-30 10:27:02,705 [salt.state       :1813][INFO    ][3156] Executing state pkg.installed for [at]
2018-12-30 10:27:02,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:27:03,078 [salt.state       :300 ][INFO    ][3156] All specified packages are already installed
2018-12-30 10:27:03,079 [salt.state       :1951][INFO    ][3156] Completed state [at] at time 10:27:03.079071 duration_in_ms=374.049
2018-12-30 10:27:03,081 [salt.state       :1780][INFO    ][3156] Running state [atd] at time 10:27:03.081610
2018-12-30 10:27:03,082 [salt.state       :1813][INFO    ][3156] Executing state service.running for [atd]
2018-12-30 10:27:03,083 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2018-12-30 10:27:03,116 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2018-12-30 10:27:03,133 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2018-12-30 10:27:03,150 [salt.state       :300 ][INFO    ][3156] The service atd is already running
2018-12-30 10:27:03,151 [salt.state       :1951][INFO    ][3156] Completed state [atd] at time 10:27:03.151345 duration_in_ms=69.734
2018-12-30 10:27:03,155 [salt.state       :1780][INFO    ][3156] Running state [cron] at time 10:27:03.155422
2018-12-30 10:27:03,155 [salt.state       :1813][INFO    ][3156] Executing state pkg.installed for [cron]
2018-12-30 10:27:03,168 [salt.state       :300 ][INFO    ][3156] All specified packages are already installed
2018-12-30 10:27:03,169 [salt.state       :1951][INFO    ][3156] Completed state [cron] at time 10:27:03.169163 duration_in_ms=13.74
2018-12-30 10:27:03,170 [salt.state       :1780][INFO    ][3156] Running state [/etc/at.allow] at time 10:27:03.170480
2018-12-30 10:27:03,170 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/at.allow]
2018-12-30 10:27:03,190 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2018-12-30 10:27:03,205 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:03,205 [salt.state       :1951][INFO    ][3156] Completed state [/etc/at.allow] at time 10:27:03.205366 duration_in_ms=34.886
2018-12-30 10:27:03,205 [salt.state       :1780][INFO    ][3156] Running state [/etc/at.deny] at time 10:27:03.205691
2018-12-30 10:27:03,205 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/at.deny]
2018-12-30 10:27:03,206 [salt.state       :300 ][INFO    ][3156] {'removed': '/etc/at.deny'}
2018-12-30 10:27:03,206 [salt.state       :1951][INFO    ][3156] Completed state [/etc/at.deny] at time 10:27:03.206662 duration_in_ms=0.971
2018-12-30 10:27:03,207 [salt.state       :1780][INFO    ][3156] Running state [cron] at time 10:27:03.207876
2018-12-30 10:27:03,208 [salt.state       :1813][INFO    ][3156] Executing state service.running for [cron]
2018-12-30 10:27:03,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2018-12-30 10:27:03,228 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2018-12-30 10:27:03,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2018-12-30 10:27:03,263 [salt.state       :300 ][INFO    ][3156] The service cron is already running
2018-12-30 10:27:03,264 [salt.state       :1951][INFO    ][3156] Completed state [cron] at time 10:27:03.264240 duration_in_ms=56.363
2018-12-30 10:27:03,266 [salt.state       :1780][INFO    ][3156] Running state [/etc/cron.allow] at time 10:27:03.265982
2018-12-30 10:27:03,266 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/cron.allow]
2018-12-30 10:27:03,291 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:03,292 [salt.state       :1951][INFO    ][3156] Completed state [/etc/cron.allow] at time 10:27:03.292202 duration_in_ms=26.22
2018-12-30 10:27:03,292 [salt.state       :1780][INFO    ][3156] Running state [/etc/cron.deny] at time 10:27:03.292593
2018-12-30 10:27:03,293 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/cron.deny]
2018-12-30 10:27:03,293 [salt.state       :300 ][INFO    ][3156] File /etc/cron.deny is not present
2018-12-30 10:27:03,293 [salt.state       :1951][INFO    ][3156] Completed state [/etc/cron.deny] at time 10:27:03.293834 duration_in_ms=1.242
2018-12-30 10:27:03,294 [salt.state       :1780][INFO    ][3156] Running state [/etc/crontab] at time 10:27:03.294771
2018-12-30 10:27:03,295 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/crontab]
2018-12-30 10:27:03,295 [salt.state       :300 ][INFO    ][3156] {'mode': '0600'}
2018-12-30 10:27:03,296 [salt.state       :1951][INFO    ][3156] Completed state [/etc/crontab] at time 10:27:03.296193 duration_in_ms=1.422
2018-12-30 10:27:03,297 [salt.state       :1780][INFO    ][3156] Running state [/etc/cron.d] at time 10:27:03.297104
2018-12-30 10:27:03,297 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/cron.d]
2018-12-30 10:27:03,298 [salt.state       :300 ][INFO    ][3156] {'mode': '0600'}
2018-12-30 10:27:03,298 [salt.state       :1951][INFO    ][3156] Completed state [/etc/cron.d] at time 10:27:03.298763 duration_in_ms=1.659
2018-12-30 10:27:03,300 [salt.state       :1780][INFO    ][3156] Running state [/etc/cron.daily] at time 10:27:03.300386
2018-12-30 10:27:03,300 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/cron.daily]
2018-12-30 10:27:03,302 [salt.state       :300 ][INFO    ][3156] {'mode': '0600'}
2018-12-30 10:27:03,302 [salt.state       :1951][INFO    ][3156] Completed state [/etc/cron.daily] at time 10:27:03.302447 duration_in_ms=2.06
2018-12-30 10:27:03,303 [salt.state       :1780][INFO    ][3156] Running state [/etc/cron.hourly] at time 10:27:03.303669
2018-12-30 10:27:03,303 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/cron.hourly]
2018-12-30 10:27:03,305 [salt.state       :300 ][INFO    ][3156] {'mode': '0600'}
2018-12-30 10:27:03,305 [salt.state       :1951][INFO    ][3156] Completed state [/etc/cron.hourly] at time 10:27:03.305533 duration_in_ms=1.864
2018-12-30 10:27:03,306 [salt.state       :1780][INFO    ][3156] Running state [/etc/cron.monthly] at time 10:27:03.306440
2018-12-30 10:27:03,306 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/cron.monthly]
2018-12-30 10:27:03,307 [salt.state       :300 ][INFO    ][3156] {'mode': '0600'}
2018-12-30 10:27:03,308 [salt.state       :1951][INFO    ][3156] Completed state [/etc/cron.monthly] at time 10:27:03.308035 duration_in_ms=1.595
2018-12-30 10:27:03,309 [salt.state       :1780][INFO    ][3156] Running state [/etc/cron.weekly] at time 10:27:03.308980
2018-12-30 10:27:03,309 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/cron.weekly]
2018-12-30 10:27:03,311 [salt.state       :300 ][INFO    ][3156] {'mode': '0600'}
2018-12-30 10:27:03,311 [salt.state       :1951][INFO    ][3156] Completed state [/etc/cron.weekly] at time 10:27:03.311663 duration_in_ms=2.683
2018-12-30 10:27:03,314 [salt.state       :1780][INFO    ][3156] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 10:27:03.314835
2018-12-30 10:27:03,315 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-12-30 10:27:03,330 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-12-30 10:27:03,343 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:03,343 [salt.state       :1951][INFO    ][3156] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 10:27:03.343373 duration_in_ms=28.538
2018-12-30 10:27:03,343 [salt.state       :1780][INFO    ][3156] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 10:27:03.343682
2018-12-30 10:27:03,344 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-12-30 10:27:03,365 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:03,365 [salt.state       :1951][INFO    ][3156] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 10:27:03.365789 duration_in_ms=22.107
2018-12-30 10:27:03,367 [salt.state       :1780][INFO    ][3156] Running state [linux_repo_prereq_pkgs] at time 10:27:03.367737
2018-12-30 10:27:03,368 [salt.state       :1813][INFO    ][3156] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-12-30 10:27:03,377 [salt.state       :300 ][INFO    ][3156] All specified packages are already installed
2018-12-30 10:27:03,378 [salt.state       :1951][INFO    ][3156] Completed state [linux_repo_prereq_pkgs] at time 10:27:03.378178 duration_in_ms=10.441
2018-12-30 10:27:03,378 [salt.state       :1780][INFO    ][3156] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 10:27:03.378444
2018-12-30 10:27:03,378 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-12-30 10:27:03,379 [salt.state       :300 ][INFO    ][3156] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-12-30 10:27:03,379 [salt.state       :1951][INFO    ][3156] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 10:27:03.379893 duration_in_ms=1.449
2018-12-30 10:27:03,380 [salt.state       :1780][INFO    ][3156] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 10:27:03.380163
2018-12-30 10:27:03,380 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-12-30 10:27:03,380 [salt.state       :300 ][INFO    ][3156] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-12-30 10:27:03,380 [salt.state       :1951][INFO    ][3156] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 10:27:03.380948 duration_in_ms=0.784
2018-12-30 10:27:03,381 [salt.state       :1780][INFO    ][3156] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 10:27:03.381207
2018-12-30 10:27:03,381 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-12-30 10:27:03,395 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-12-30 10:27:03,511 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:03,511 [salt.state       :1951][INFO    ][3156] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 10:27:03.511817 duration_in_ms=130.61
2018-12-30 10:27:03,515 [salt.state       :1780][INFO    ][3156] Running state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 10:27:03.515498
2018-12-30 10:27:03,515 [salt.state       :1813][INFO    ][3156] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main]
2018-12-30 10:27:03,787 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-rocky/xenial/archive-openstack-rocky.key'] in directory '/root'
2018-12-30 10:27:04,062 [salt.state       :300 ][INFO    ][3156] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main'}
2018-12-30 10:27:04,064 [salt.state       :1951][INFO    ][3156] Completed state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 10:27:04.064420 duration_in_ms=548.918
2018-12-30 10:27:04,064 [salt.state       :1780][INFO    ][3156] Running state [pkg.refresh_db] at time 10:27:04.064879
2018-12-30 10:27:04,066 [salt.state       :1813][INFO    ][3156] Executing state module.run for [pkg.refresh_db]
2018-12-30 10:27:04,066 [salt.utils.decorators:613 ][WARNING ][3156] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-30 10:27:04,067 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 10:27:08,141 [salt.state       :300 ][INFO    ][3156] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial InRelease': True, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial/main amd64 Packages': True}}
2018-12-30 10:27:08,142 [salt.state       :1951][INFO    ][3156] Completed state [pkg.refresh_db] at time 10:27:08.142219 duration_in_ms=4077.339
2018-12-30 10:27:08,142 [salt.state       :1780][INFO    ][3156] Running state [linux_extra_packages_removed] at time 10:27:08.142588
2018-12-30 10:27:08,142 [salt.state       :1813][INFO    ][3156] Executing state pkg.removed for [linux_extra_packages_removed]
2018-12-30 10:27:08,170 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2018-12-30 10:27:08,811 [salt.minion      :1308][INFO    ][3065] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230102708797334
2018-12-30 10:27:08,829 [salt.minion      :1432][INFO    ][3829] Starting a new job with PID 3829
2018-12-30 10:27:08,852 [salt.minion      :1711][INFO    ][3829] Returning information for job: 20181230102708797334
2018-12-30 10:27:10,027 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:27:10,069 [salt.state       :300 ][INFO    ][3156] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2018-12-30 10:27:10,103 [salt.state       :915 ][INFO    ][3156] Loading fresh modules for state activity
2018-12-30 10:27:10,154 [salt.state       :1951][INFO    ][3156] Completed state [linux_extra_packages_removed] at time 10:27:10.154676 duration_in_ms=2012.088
2018-12-30 10:27:10,161 [salt.state       :1780][INFO    ][3156] Running state [linux_extra_packages_latest] at time 10:27:10.161613
2018-12-30 10:27:10,161 [salt.state       :1813][INFO    ][3156] Executing state pkg.latest for [linux_extra_packages_latest]
2018-12-30 10:27:10,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-12-30 10:27:11,034 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:27:11,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-12-30 10:27:13,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:27:13,834 [salt.state       :300 ][INFO    ][3156] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-12-30 10:27:13,859 [salt.state       :915 ][INFO    ][3156] Loading fresh modules for state activity
2018-12-30 10:27:13,912 [salt.state       :1951][INFO    ][3156] Completed state [linux_extra_packages_latest] at time 10:27:13.912386 duration_in_ms=3750.772
2018-12-30 10:27:13,918 [salt.state       :1780][INFO    ][3156] Running state [UTC] at time 10:27:13.918547
2018-12-30 10:27:13,918 [salt.state       :1813][INFO    ][3156] Executing state timezone.system for [UTC]
2018-12-30 10:27:13,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['timedatectl'] in directory '/root'
2018-12-30 10:27:13,979 [salt.state       :300 ][INFO    ][3156] Timezone UTC already set, UTC already set to UTC
2018-12-30 10:27:13,982 [salt.state       :1951][INFO    ][3156] Completed state [UTC] at time 10:27:13.982642 duration_in_ms=64.095
2018-12-30 10:27:13,986 [salt.state       :1780][INFO    ][3156] Running state [/etc/default/grub.d] at time 10:27:13.986270
2018-12-30 10:27:13,986 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/default/grub.d]
2018-12-30 10:27:13,993 [salt.state       :300 ][INFO    ][3156] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-12-30 10:27:13,994 [salt.state       :1951][INFO    ][3156] Completed state [/etc/default/grub.d] at time 10:27:13.994536 duration_in_ms=8.265
2018-12-30 10:27:13,996 [salt.state       :1780][INFO    ][3156] Running state [update-grub] at time 10:27:13.996144
2018-12-30 10:27:13,996 [salt.state       :1813][INFO    ][3156] Executing state cmd.wait for [update-grub]
2018-12-30 10:27:13,997 [salt.state       :300 ][INFO    ][3156] No changes made for update-grub
2018-12-30 10:27:13,997 [salt.state       :1951][INFO    ][3156] Completed state [update-grub] at time 10:27:13.997624 duration_in_ms=1.48
2018-12-30 10:27:14,000 [salt.state       :1780][INFO    ][3156] Running state [/boot/grub/grub.cfg] at time 10:27:14.000806
2018-12-30 10:27:14,001 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/boot/grub/grub.cfg]
2018-12-30 10:27:15,096 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-12-30 10:27:15,115 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:15,118 [salt.state       :300 ][INFO    ][3156] {'mode': '0400'}
2018-12-30 10:27:15,118 [salt.state       :1951][INFO    ][3156] Completed state [/boot/grub/grub.cfg] at time 10:27:15.118797 duration_in_ms=1117.99
2018-12-30 10:27:15,120 [salt.state       :1780][INFO    ][3156] Running state [nf_conntrack] at time 10:27:15.120340
2018-12-30 10:27:15,121 [salt.state       :1813][INFO    ][3156] Executing state kmod.present for [nf_conntrack]
2018-12-30 10:27:15,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'lsmod' in directory '/root'
2018-12-30 10:27:15,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'lsmod' in directory '/root'
2018-12-30 10:27:15,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-12-30 10:27:15,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'lsmod' in directory '/root'
2018-12-30 10:27:15,695 [salt.state       :300 ][INFO    ][3156] {'nf_conntrack': 'loaded'}
2018-12-30 10:27:15,696 [salt.state       :1951][INFO    ][3156] Completed state [nf_conntrack] at time 10:27:15.696789 duration_in_ms=576.449
2018-12-30 10:27:15,697 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d] at time 10:27:15.697397
2018-12-30 10:27:15,697 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/modprobe.d]
2018-12-30 10:27:15,699 [salt.state       :300 ][INFO    ][3156] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2018-12-30 10:27:15,699 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d] at time 10:27:15.699914 duration_in_ms=2.517
2018-12-30 10:27:15,702 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/hfsplus.conf] at time 10:27:15.702654
2018-12-30 10:27:15,703 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2018-12-30 10:27:15,725 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2018-12-30 10:27:15,874 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:15,875 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/hfsplus.conf] at time 10:27:15.875601 duration_in_ms=172.947
2018-12-30 10:27:15,877 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/rds.conf] at time 10:27:15.877696
2018-12-30 10:27:15,878 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2018-12-30 10:27:16,030 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:16,031 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/rds.conf] at time 10:27:16.031906 duration_in_ms=154.21
2018-12-30 10:27:16,033 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/cramfs.conf] at time 10:27:16.033372
2018-12-30 10:27:16,033 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2018-12-30 10:27:16,186 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:16,188 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/cramfs.conf] at time 10:27:16.188202 duration_in_ms=154.83
2018-12-30 10:27:16,189 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/freevxfs.conf] at time 10:27:16.189829
2018-12-30 10:27:16,190 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2018-12-30 10:27:16,351 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:16,353 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/freevxfs.conf] at time 10:27:16.353026 duration_in_ms=163.196
2018-12-30 10:27:16,354 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/hfs.conf] at time 10:27:16.354541
2018-12-30 10:27:16,355 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2018-12-30 10:27:16,520 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:16,520 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/hfs.conf] at time 10:27:16.520872 duration_in_ms=166.331
2018-12-30 10:27:16,522 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/squashfs.conf] at time 10:27:16.522765
2018-12-30 10:27:16,523 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2018-12-30 10:27:16,684 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:16,685 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/squashfs.conf] at time 10:27:16.685588 duration_in_ms=162.823
2018-12-30 10:27:16,686 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/udf.conf] at time 10:27:16.686898
2018-12-30 10:27:16,687 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2018-12-30 10:27:16,857 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:16,857 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/udf.conf] at time 10:27:16.857450 duration_in_ms=170.552
2018-12-30 10:27:16,859 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/vfat.conf] at time 10:27:16.858988
2018-12-30 10:27:16,859 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2018-12-30 10:27:17,010 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:17,011 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/vfat.conf] at time 10:27:17.011122 duration_in_ms=152.134
2018-12-30 10:27:17,012 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/sctp.conf] at time 10:27:17.012403
2018-12-30 10:27:17,012 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2018-12-30 10:27:17,153 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:17,153 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/sctp.conf] at time 10:27:17.153917 duration_in_ms=141.514
2018-12-30 10:27:17,155 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/jffs2.conf] at time 10:27:17.155141
2018-12-30 10:27:17,155 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2018-12-30 10:27:17,313 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:17,313 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/jffs2.conf] at time 10:27:17.313744 duration_in_ms=158.603
2018-12-30 10:27:17,315 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/tipc.conf] at time 10:27:17.314972
2018-12-30 10:27:17,315 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2018-12-30 10:27:17,466 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:17,467 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/tipc.conf] at time 10:27:17.467166 duration_in_ms=152.193
2018-12-30 10:27:17,470 [salt.state       :1780][INFO    ][3156] Running state [/etc/modprobe.d/dccp.conf] at time 10:27:17.470282
2018-12-30 10:27:17,470 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2018-12-30 10:27:17,614 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:17,615 [salt.state       :1951][INFO    ][3156] Completed state [/etc/modprobe.d/dccp.conf] at time 10:27:17.615060 duration_in_ms=144.778
2018-12-30 10:27:17,615 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_congestion_control] at time 10:27:17.615648
2018-12-30 10:27:17,615 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-12-30 10:27:17,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-12-30 10:27:17,638 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-12-30 10:27:17,638 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_congestion_control] at time 10:27:17.638904 duration_in_ms=23.255
2018-12-30 10:27:17,640 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_slow_start_after_idle] at time 10:27:17.640463
2018-12-30 10:27:17,640 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-12-30 10:27:17,642 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-12-30 10:27:17,656 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-12-30 10:27:17,657 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 10:27:17.656990 duration_in_ms=16.528
2018-12-30 10:27:17,657 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 10:27:17.657662
2018-12-30 10:27:17,657 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2018-12-30 10:27:17,659 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2018-12-30 10:27:17,670 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2018-12-30 10:27:17,670 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 10:27:17.670811 duration_in_ms=13.149
2018-12-30 10:27:17,671 [salt.state       :1780][INFO    ][3156] Running state [net.nf_conntrack_max] at time 10:27:17.671160
2018-12-30 10:27:17,672 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.nf_conntrack_max]
2018-12-30 10:27:17,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-12-30 10:27:17,685 [salt.state       :300 ][INFO    ][3156] {'net.nf_conntrack_max': 1048576}
2018-12-30 10:27:17,686 [salt.state       :1951][INFO    ][3156] Completed state [net.nf_conntrack_max] at time 10:27:17.686058 duration_in_ms=14.898
2018-12-30 10:27:17,686 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 10:27:17.686411
2018-12-30 10:27:17,686 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2018-12-30 10:27:17,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2018-12-30 10:27:17,700 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2018-12-30 10:27:17,700 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 10:27:17.700717 duration_in_ms=14.306
2018-12-30 10:27:17,701 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.default.log_martians] at time 10:27:17.701067
2018-12-30 10:27:17,701 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2018-12-30 10:27:17,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2018-12-30 10:27:17,714 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.default.log_martians': 1}
2018-12-30 10:27:17,715 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.default.log_martians] at time 10:27:17.715180 duration_in_ms=14.113
2018-12-30 10:27:17,715 [salt.state       :1780][INFO    ][3156] Running state [net.core.somaxconn] at time 10:27:17.715587
2018-12-30 10:27:17,715 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.core.somaxconn]
2018-12-30 10:27:17,716 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-12-30 10:27:17,731 [salt.state       :300 ][INFO    ][3156] {'net.core.somaxconn': 4096}
2018-12-30 10:27:17,731 [salt.state       :1951][INFO    ][3156] Completed state [net.core.somaxconn] at time 10:27:17.731442 duration_in_ms=15.854
2018-12-30 10:27:17,731 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.all.send_redirects] at time 10:27:17.731822
2018-12-30 10:27:17,732 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2018-12-30 10:27:17,734 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2018-12-30 10:27:17,750 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.all.send_redirects': 0}
2018-12-30 10:27:17,751 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.all.send_redirects] at time 10:27:17.751644 duration_in_ms=19.822
2018-12-30 10:27:17,752 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_tw_reuse] at time 10:27:17.752063
2018-12-30 10:27:17,752 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-12-30 10:27:17,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-12-30 10:27:17,771 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_tw_reuse': 1}
2018-12-30 10:27:17,771 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_tw_reuse] at time 10:27:17.771892 duration_in_ms=19.829
2018-12-30 10:27:17,772 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.default.rp_filter] at time 10:27:17.772277
2018-12-30 10:27:17,772 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2018-12-30 10:27:17,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2018-12-30 10:27:17,788 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.default.rp_filter': 1}
2018-12-30 10:27:17,789 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.default.rp_filter] at time 10:27:17.789320 duration_in_ms=17.043
2018-12-30 10:27:17,789 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_fin_timeout] at time 10:27:17.789725
2018-12-30 10:27:17,790 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-12-30 10:27:17,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-12-30 10:27:17,804 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_fin_timeout': 30}
2018-12-30 10:27:17,805 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_fin_timeout] at time 10:27:17.805185 duration_in_ms=15.459
2018-12-30 10:27:17,805 [salt.state       :1780][INFO    ][3156] Running state [kernel.panic] at time 10:27:17.805562
2018-12-30 10:27:17,805 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [kernel.panic]
2018-12-30 10:27:17,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-12-30 10:27:17,819 [salt.state       :300 ][INFO    ][3156] {'kernel.panic': 60}
2018-12-30 10:27:17,819 [salt.state       :1951][INFO    ][3156] Completed state [kernel.panic] at time 10:27:17.819867 duration_in_ms=14.305
2018-12-30 10:27:17,820 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_keepalive_probes] at time 10:27:17.820224
2018-12-30 10:27:17,820 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-12-30 10:27:17,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-12-30 10:27:17,837 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_keepalive_probes': 8}
2018-12-30 10:27:17,837 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_keepalive_probes] at time 10:27:17.837473 duration_in_ms=17.249
2018-12-30 10:27:17,837 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.all.log_martians] at time 10:27:17.837857
2018-12-30 10:27:17,838 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2018-12-30 10:27:17,839 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2018-12-30 10:27:17,853 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.all.log_martians': 1}
2018-12-30 10:27:17,853 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.all.log_martians] at time 10:27:17.853459 duration_in_ms=15.602
2018-12-30 10:27:17,853 [salt.state       :1780][INFO    ][3156] Running state [fs.suid_dumpable] at time 10:27:17.853824
2018-12-30 10:27:17,854 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [fs.suid_dumpable]
2018-12-30 10:27:17,856 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2018-12-30 10:27:17,871 [salt.state       :300 ][INFO    ][3156] {'fs.suid_dumpable': 0}
2018-12-30 10:27:17,871 [salt.state       :1951][INFO    ][3156] Completed state [fs.suid_dumpable] at time 10:27:17.871399 duration_in_ms=17.575
2018-12-30 10:27:17,871 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.default.accept_redirects] at time 10:27:17.871796
2018-12-30 10:27:17,872 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2018-12-30 10:27:17,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2018-12-30 10:27:17,889 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.default.accept_redirects': 0}
2018-12-30 10:27:17,890 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.default.accept_redirects] at time 10:27:17.890271 duration_in_ms=18.475
2018-12-30 10:27:17,890 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.default.secure_redirects] at time 10:27:17.890647
2018-12-30 10:27:17,890 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2018-12-30 10:27:17,892 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2018-12-30 10:27:17,909 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.default.secure_redirects': 0}
2018-12-30 10:27:17,909 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.default.secure_redirects] at time 10:27:17.909870 duration_in_ms=19.223
2018-12-30 10:27:17,910 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.default.accept_source_route] at time 10:27:17.910234
2018-12-30 10:27:17,910 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2018-12-30 10:27:17,912 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2018-12-30 10:27:17,929 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.default.accept_source_route': 0}
2018-12-30 10:27:17,929 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.default.accept_source_route] at time 10:27:17.929753 duration_in_ms=19.518
2018-12-30 10:27:17,930 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_keepalive_intvl] at time 10:27:17.930140
2018-12-30 10:27:17,930 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-12-30 10:27:17,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-12-30 10:27:17,945 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-12-30 10:27:17,945 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_keepalive_intvl] at time 10:27:17.945590 duration_in_ms=15.45
2018-12-30 10:27:17,945 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_keepalive_time] at time 10:27:17.945935
2018-12-30 10:27:17,946 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-12-30 10:27:17,947 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-12-30 10:27:17,961 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_keepalive_time': 30}
2018-12-30 10:27:17,962 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_keepalive_time] at time 10:27:17.962080 duration_in_ms=16.145
2018-12-30 10:27:17,962 [salt.state       :1780][INFO    ][3156] Running state [kernel.randomize_va_space] at time 10:27:17.962452
2018-12-30 10:27:17,962 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [kernel.randomize_va_space]
2018-12-30 10:27:17,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2018-12-30 10:27:17,981 [salt.state       :300 ][INFO    ][3156] {'kernel.randomize_va_space': 2}
2018-12-30 10:27:17,981 [salt.state       :1951][INFO    ][3156] Completed state [kernel.randomize_va_space] at time 10:27:17.981798 duration_in_ms=19.346
2018-12-30 10:27:17,982 [salt.state       :1780][INFO    ][3156] Running state [fs.file-max] at time 10:27:17.982170
2018-12-30 10:27:17,982 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [fs.file-max]
2018-12-30 10:27:17,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-12-30 10:27:17,998 [salt.state       :300 ][INFO    ][3156] {'fs.file-max': 124165}
2018-12-30 10:27:17,998 [salt.state       :1951][INFO    ][3156] Completed state [fs.file-max] at time 10:27:17.998591 duration_in_ms=16.42
2018-12-30 10:27:17,999 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_syncookies] at time 10:27:17.998977
2018-12-30 10:27:17,999 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2018-12-30 10:27:18,001 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2018-12-30 10:27:18,016 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_syncookies': 1}
2018-12-30 10:27:18,016 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_syncookies] at time 10:27:18.016668 duration_in_ms=17.69
2018-12-30 10:27:18,017 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_max_syn_backlog] at time 10:27:18.017062
2018-12-30 10:27:18,017 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-12-30 10:27:18,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-12-30 10:27:18,035 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-12-30 10:27:18,036 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_max_syn_backlog] at time 10:27:18.036116 duration_in_ms=19.053
2018-12-30 10:27:18,037 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.all.rp_filter] at time 10:27:18.036510
2018-12-30 10:27:18,037 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2018-12-30 10:27:18,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2018-12-30 10:27:18,056 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.all.rp_filter': 1}
2018-12-30 10:27:18,056 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.all.rp_filter] at time 10:27:18.056670 duration_in_ms=20.161
2018-12-30 10:27:18,057 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.all.accept_source_route] at time 10:27:18.057057
2018-12-30 10:27:18,057 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2018-12-30 10:27:18,058 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2018-12-30 10:27:18,074 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.all.accept_source_route': 0}
2018-12-30 10:27:18,075 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.all.accept_source_route] at time 10:27:18.075018 duration_in_ms=17.961
2018-12-30 10:27:18,075 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.tcp_retries2] at time 10:27:18.075436
2018-12-30 10:27:18,075 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-12-30 10:27:18,077 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-12-30 10:27:18,094 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.tcp_retries2': 5}
2018-12-30 10:27:18,094 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.tcp_retries2] at time 10:27:18.094428 duration_in_ms=18.991
2018-12-30 10:27:18,094 [salt.state       :1780][INFO    ][3156] Running state [net.core.netdev_max_backlog] at time 10:27:18.094824
2018-12-30 10:27:18,095 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-12-30 10:27:18,097 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-12-30 10:27:18,113 [salt.state       :300 ][INFO    ][3156] {'net.core.netdev_max_backlog': 261144}
2018-12-30 10:27:18,113 [salt.state       :1951][INFO    ][3156] Completed state [net.core.netdev_max_backlog] at time 10:27:18.113675 duration_in_ms=18.851
2018-12-30 10:27:18,114 [salt.state       :1780][INFO    ][3156] Running state [vm.swappiness] at time 10:27:18.114035
2018-12-30 10:27:18,114 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [vm.swappiness]
2018-12-30 10:27:18,115 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-12-30 10:27:18,129 [salt.state       :300 ][INFO    ][3156] {'vm.swappiness': 10}
2018-12-30 10:27:18,130 [salt.state       :1951][INFO    ][3156] Completed state [vm.swappiness] at time 10:27:18.130096 duration_in_ms=16.061
2018-12-30 10:27:18,130 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.all.secure_redirects] at time 10:27:18.130455
2018-12-30 10:27:18,130 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2018-12-30 10:27:18,133 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2018-12-30 10:27:18,145 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.all.secure_redirects': 0}
2018-12-30 10:27:18,146 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.all.secure_redirects] at time 10:27:18.146018 duration_in_ms=15.563
2018-12-30 10:27:18,146 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.neigh.default.gc_thresh1] at time 10:27:18.146372
2018-12-30 10:27:18,146 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-12-30 10:27:18,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-12-30 10:27:18,160 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-12-30 10:27:18,160 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 10:27:18.160376 duration_in_ms=14.004
2018-12-30 10:27:18,160 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.neigh.default.gc_thresh2] at time 10:27:18.160736
2018-12-30 10:27:18,161 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-12-30 10:27:18,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-12-30 10:27:18,174 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-12-30 10:27:18,175 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 10:27:18.175116 duration_in_ms=14.381
2018-12-30 10:27:18,175 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.neigh.default.gc_thresh3] at time 10:27:18.175483
2018-12-30 10:27:18,175 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-12-30 10:27:18,176 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-12-30 10:27:18,190 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-12-30 10:27:18,191 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 10:27:18.191021 duration_in_ms=15.537
2018-12-30 10:27:18,191 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.default.send_redirects] at time 10:27:18.191403
2018-12-30 10:27:18,191 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2018-12-30 10:27:18,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2018-12-30 10:27:18,208 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.default.send_redirects': 0}
2018-12-30 10:27:18,209 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.default.send_redirects] at time 10:27:18.208910 duration_in_ms=17.507
2018-12-30 10:27:18,209 [salt.state       :1780][INFO    ][3156] Running state [net.ipv4.conf.all.accept_redirects] at time 10:27:18.209607
2018-12-30 10:27:18,209 [salt.state       :1813][INFO    ][3156] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2018-12-30 10:27:18,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2018-12-30 10:27:18,229 [salt.state       :300 ][INFO    ][3156] {'net.ipv4.conf.all.accept_redirects': 0}
2018-12-30 10:27:18,229 [salt.state       :1951][INFO    ][3156] Completed state [net.ipv4.conf.all.accept_redirects] at time 10:27:18.229497 duration_in_ms=19.889
2018-12-30 10:27:18,229 [salt.state       :1780][INFO    ][3156] Running state [linux_sysfs_package] at time 10:27:18.229873
2018-12-30 10:27:18,230 [salt.state       :1813][INFO    ][3156] Executing state pkg.installed for [linux_sysfs_package]
2018-12-30 10:27:18,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-12-30 10:27:18,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 10:27:18,836 [salt.minion      :1308][INFO    ][3065] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230102718822287
2018-12-30 10:27:18,857 [salt.minion      :1432][INFO    ][4397] Starting a new job with PID 4397
2018-12-30 10:27:18,880 [salt.minion      :1711][INFO    ][4397] Returning information for job: 20181230102718822287
2018-12-30 10:27:20,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:27:20,528 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-12-30 10:27:24,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:27:24,118 [salt.state       :300 ][INFO    ][3156] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-12-30 10:27:24,146 [salt.state       :915 ][INFO    ][3156] Loading fresh modules for state activity
2018-12-30 10:27:24,206 [salt.state       :1951][INFO    ][3156] Completed state [linux_sysfs_package] at time 10:27:24.206101 duration_in_ms=5976.226
2018-12-30 10:27:24,213 [salt.state       :1780][INFO    ][3156] Running state [/etc/sysfs.d] at time 10:27:24.213264
2018-12-30 10:27:24,213 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/etc/sysfs.d]
2018-12-30 10:27:24,220 [salt.state       :300 ][INFO    ][3156] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-12-30 10:27:24,220 [salt.state       :1951][INFO    ][3156] Completed state [/etc/sysfs.d] at time 10:27:24.220743 duration_in_ms=7.479
2018-12-30 10:27:24,222 [salt.state       :1780][INFO    ][3156] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 10:27:24.222320
2018-12-30 10:27:24,223 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2018-12-30 10:27:24,252 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/sysfs.conf'
2018-12-30 10:27:24,275 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:24,275 [salt.state       :1951][INFO    ][3156] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 10:27:24.275739 duration_in_ms=53.419
2018-12-30 10:27:24,277 [salt.state       :1780][INFO    ][3156] Running state [sysfs.write] at time 10:27:24.277498
2018-12-30 10:27:24,277 [salt.state       :1813][INFO    ][3156] Executing state module.run for [sysfs.write]
2018-12-30 10:27:24,278 [salt.utils.decorators:613 ][WARNING ][3156] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-30 10:27:24,281 [salt.state       :300 ][INFO    ][3156] {'ret': True}
2018-12-30 10:27:24,282 [salt.state       :1951][INFO    ][3156] Completed state [sysfs.write] at time 10:27:24.282032 duration_in_ms=4.534
2018-12-30 10:27:24,870 [salt.state       :1780][INFO    ][3156] Running state [ondemand] at time 10:27:24.870745
2018-12-30 10:27:24,871 [salt.state       :1813][INFO    ][3156] Executing state service.dead for [ondemand]
2018-12-30 10:27:24,872 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-12-30 10:27:24,891 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-12-30 10:27:24,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-30 10:27:24,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-12-30 10:27:24,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-12-30 10:27:25,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-30 10:27:25,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-30 10:27:25,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-12-30 10:27:25,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-30 10:27:25,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'runlevel' in directory '/root'
2018-12-30 10:27:25,246 [salt.state       :300 ][INFO    ][3156] {'ondemand': True}
2018-12-30 10:27:25,246 [salt.state       :1951][INFO    ][3156] Completed state [ondemand] at time 10:27:25.246879 duration_in_ms=376.135
2018-12-30 10:27:25,248 [salt.state       :1780][INFO    ][3156] Running state [en_US.UTF-8] at time 10:27:25.248893
2018-12-30 10:27:25,249 [salt.state       :1813][INFO    ][3156] Executing state locale.present for [en_US.UTF-8]
2018-12-30 10:27:25,249 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'locale -a' in directory '/root'
2018-12-30 10:27:25,261 [salt.state       :300 ][INFO    ][3156] Locale en_US.UTF-8 is already present
2018-12-30 10:27:25,262 [salt.state       :1951][INFO    ][3156] Completed state [en_US.UTF-8] at time 10:27:25.261958 duration_in_ms=13.065
2018-12-30 10:27:25,264 [salt.state       :1780][INFO    ][3156] Running state [en_US.UTF-8] at time 10:27:25.264891
2018-12-30 10:27:25,265 [salt.state       :1813][INFO    ][3156] Executing state locale.system for [en_US.UTF-8]
2018-12-30 10:27:25,266 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'localectl' in directory '/root'
2018-12-30 10:27:25,310 [salt.state       :300 ][INFO    ][3156] System locale en_US.UTF-8 already set
2018-12-30 10:27:25,311 [salt.state       :1951][INFO    ][3156] Completed state [en_US.UTF-8] at time 10:27:25.311025 duration_in_ms=46.133
2018-12-30 10:27:25,313 [salt.state       :1780][INFO    ][3156] Running state [root] at time 10:27:25.313091
2018-12-30 10:27:25,313 [salt.state       :1813][INFO    ][3156] Executing state group.present for [root]
2018-12-30 10:27:25,314 [salt.state       :300 ][INFO    ][3156] Group root is present and up to date
2018-12-30 10:27:25,314 [salt.state       :1951][INFO    ][3156] Completed state [root] at time 10:27:25.314617 duration_in_ms=1.526
2018-12-30 10:27:25,317 [salt.state       :1780][INFO    ][3156] Running state [root] at time 10:27:25.317158
2018-12-30 10:27:25,319 [salt.state       :1813][INFO    ][3156] Executing state user.present for [root]
2018-12-30 10:27:25,324 [salt.state       :300 ][INFO    ][3156] User root is present and up to date
2018-12-30 10:27:25,325 [salt.state       :1951][INFO    ][3156] Completed state [root] at time 10:27:25.324856 duration_in_ms=7.698
2018-12-30 10:27:25,326 [salt.state       :1780][INFO    ][3156] Running state [/root] at time 10:27:25.326757
2018-12-30 10:27:25,327 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/root]
2018-12-30 10:27:25,328 [salt.state       :300 ][INFO    ][3156] Directory /root is in the correct state
Directory /root updated
2018-12-30 10:27:25,328 [salt.state       :1951][INFO    ][3156] Completed state [/root] at time 10:27:25.328929 duration_in_ms=2.172
2018-12-30 10:27:25,329 [salt.state       :1780][INFO    ][3156] Running state [/etc/sudoers.d/90-salt-user-root] at time 10:27:25.329349
2018-12-30 10:27:25,329 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-12-30 10:27:25,330 [salt.state       :300 ][INFO    ][3156] File /etc/sudoers.d/90-salt-user-root is not present
2018-12-30 10:27:25,330 [salt.state       :1951][INFO    ][3156] Completed state [/etc/sudoers.d/90-salt-user-root] at time 10:27:25.330566 duration_in_ms=1.217
2018-12-30 10:27:25,330 [salt.state       :1780][INFO    ][3156] Running state [ubuntu] at time 10:27:25.330941
2018-12-30 10:27:25,331 [salt.state       :1813][INFO    ][3156] Executing state group.present for [ubuntu]
2018-12-30 10:27:25,332 [salt.state       :300 ][INFO    ][3156] Group ubuntu is present and up to date
2018-12-30 10:27:25,332 [salt.state       :1951][INFO    ][3156] Completed state [ubuntu] at time 10:27:25.332808 duration_in_ms=1.867
2018-12-30 10:27:25,334 [salt.state       :1780][INFO    ][3156] Running state [ubuntu] at time 10:27:25.334203
2018-12-30 10:27:25,334 [salt.state       :1813][INFO    ][3156] Executing state user.present for [ubuntu]
2018-12-30 10:27:25,338 [salt.state       :300 ][INFO    ][3156] {'passwd': 'XXX-REDACTED-XXX'}
2018-12-30 10:27:25,339 [salt.state       :1951][INFO    ][3156] Completed state [ubuntu] at time 10:27:25.339028 duration_in_ms=4.825
2018-12-30 10:27:25,341 [salt.state       :1780][INFO    ][3156] Running state [/home/ubuntu] at time 10:27:25.341159
2018-12-30 10:27:25,341 [salt.state       :1813][INFO    ][3156] Executing state file.directory for [/home/ubuntu]
2018-12-30 10:27:25,342 [salt.state       :300 ][INFO    ][3156] {'mode': '0700'}
2018-12-30 10:27:25,343 [salt.state       :1951][INFO    ][3156] Completed state [/home/ubuntu] at time 10:27:25.343069 duration_in_ms=1.91
2018-12-30 10:27:25,344 [salt.state       :1780][INFO    ][3156] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 10:27:25.344441
2018-12-30 10:27:25,344 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-12-30 10:27:25,366 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-12-30 10:27:25,378 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.DTVeND' in directory '/root'
2018-12-30 10:27:25,400 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:25,401 [salt.state       :1951][INFO    ][3156] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 10:27:25.401153 duration_in_ms=56.712
2018-12-30 10:27:25,401 [salt.state       :1780][INFO    ][3156] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 10:27:25.401729
2018-12-30 10:27:25,402 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2018-12-30 10:27:25,426 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-12-30 10:27:25,553 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:25,553 [salt.state       :1951][INFO    ][3156] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 10:27:25.553916 duration_in_ms=152.186
2018-12-30 10:27:25,554 [salt.state       :1780][INFO    ][3156] Running state [/etc/security/limits.d/90-salt-default.conf] at time 10:27:25.554148
2018-12-30 10:27:25,554 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-12-30 10:27:25,681 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:25,681 [salt.state       :1951][INFO    ][3156] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 10:27:25.681566 duration_in_ms=127.417
2018-12-30 10:27:25,681 [salt.state       :1780][INFO    ][3156] Running state [apt-daily.timer] at time 10:27:25.681805
2018-12-30 10:27:25,682 [salt.state       :1813][INFO    ][3156] Executing state service.dead for [apt-daily.timer]
2018-12-30 10:27:25,682 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2018-12-30 10:27:25,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:25,720 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:25,739 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:25,767 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:25,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:25,821 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:25,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:26,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-30 10:27:26,028 [salt.state       :300 ][INFO    ][3156] {'apt-daily.timer': True}
2018-12-30 10:27:26,029 [salt.state       :1951][INFO    ][3156] Completed state [apt-daily.timer] at time 10:27:26.029572 duration_in_ms=347.767
2018-12-30 10:27:26,030 [salt.state       :1780][INFO    ][3156] Running state [autofs] at time 10:27:26.030155
2018-12-30 10:27:26,030 [salt.state       :1813][INFO    ][3156] Executing state service.disabled for [autofs]
2018-12-30 10:27:26,033 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2018-12-30 10:27:26,061 [salt.state       :300 ][INFO    ][3156] The named service autofs is not available
2018-12-30 10:27:26,062 [salt.state       :1951][INFO    ][3156] Completed state [autofs] at time 10:27:26.062400 duration_in_ms=32.244
2018-12-30 10:27:26,063 [salt.state       :1780][INFO    ][3156] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 10:27:26.062982
2018-12-30 10:27:26,064 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-12-30 10:27:26,090 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-12-30 10:27:26,233 [salt.state       :300 ][INFO    ][3156] File changed:
New file
2018-12-30 10:27:26,234 [salt.state       :1951][INFO    ][3156] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 10:27:26.234186 duration_in_ms=171.203
2018-12-30 10:27:26,237 [salt.state       :1780][INFO    ][3156] Running state [service.systemctl_reload] at time 10:27:26.237153
2018-12-30 10:27:26,237 [salt.state       :1813][INFO    ][3156] Executing state module.wait for [service.systemctl_reload]
2018-12-30 10:27:26,238 [salt.state       :300 ][INFO    ][3156] No changes made for service.systemctl_reload
2018-12-30 10:27:26,238 [salt.state       :1951][INFO    ][3156] Completed state [service.systemctl_reload] at time 10:27:26.238511 duration_in_ms=1.358
2018-12-30 10:27:26,239 [salt.state       :1780][INFO    ][3156] Running state [service.systemctl_reload] at time 10:27:26.239191
2018-12-30 10:27:26,239 [salt.state       :1813][INFO    ][3156] Executing state module.mod_watch for [service.systemctl_reload]
2018-12-30 10:27:26,240 [salt.utils.decorators:613 ][WARNING ][3156] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-30 10:27:26,241 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-12-30 10:27:26,403 [salt.state       :300 ][INFO    ][3156] {'ret': True}
2018-12-30 10:27:26,404 [salt.state       :1951][INFO    ][3156] Completed state [service.systemctl_reload] at time 10:27:26.404152 duration_in_ms=164.96
2018-12-30 10:27:26,408 [salt.state       :1780][INFO    ][3156] Running state [/etc/shadow] at time 10:27:26.408144
2018-12-30 10:27:26,408 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/shadow]
2018-12-30 10:27:26,409 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,410 [salt.state       :300 ][INFO    ][3156] File /etc/shadow exists with proper permissions. No changes made.
2018-12-30 10:27:26,410 [salt.state       :1951][INFO    ][3156] Completed state [/etc/shadow] at time 10:27:26.410908 duration_in_ms=2.764
2018-12-30 10:27:26,411 [salt.state       :1780][INFO    ][3156] Running state [/etc/gshadow] at time 10:27:26.411351
2018-12-30 10:27:26,411 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/gshadow]
2018-12-30 10:27:26,412 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,413 [salt.state       :300 ][INFO    ][3156] File /etc/gshadow exists with proper permissions. No changes made.
2018-12-30 10:27:26,413 [salt.state       :1951][INFO    ][3156] Completed state [/etc/gshadow] at time 10:27:26.413618 duration_in_ms=2.267
2018-12-30 10:27:26,414 [salt.state       :1780][INFO    ][3156] Running state [/etc/group-] at time 10:27:26.414047
2018-12-30 10:27:26,414 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/group-]
2018-12-30 10:27:26,415 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,418 [salt.state       :300 ][INFO    ][3156] File /etc/group- exists with proper permissions. No changes made.
2018-12-30 10:27:26,419 [salt.state       :1951][INFO    ][3156] Completed state [/etc/group-] at time 10:27:26.418987 duration_in_ms=4.94
2018-12-30 10:27:26,419 [salt.state       :1780][INFO    ][3156] Running state [/etc/shadow-] at time 10:27:26.419759
2018-12-30 10:27:26,420 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/shadow-]
2018-12-30 10:27:26,421 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,421 [salt.state       :300 ][INFO    ][3156] File /etc/shadow- exists with proper permissions. No changes made.
2018-12-30 10:27:26,422 [salt.state       :1951][INFO    ][3156] Completed state [/etc/shadow-] at time 10:27:26.422253 duration_in_ms=2.494
2018-12-30 10:27:26,422 [salt.state       :1780][INFO    ][3156] Running state [/etc/passwd-] at time 10:27:26.422688
2018-12-30 10:27:26,423 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/passwd-]
2018-12-30 10:27:26,423 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,424 [salt.state       :300 ][INFO    ][3156] File /etc/passwd- exists with proper permissions. No changes made.
2018-12-30 10:27:26,425 [salt.state       :1951][INFO    ][3156] Completed state [/etc/passwd-] at time 10:27:26.425425 duration_in_ms=2.736
2018-12-30 10:27:26,425 [salt.state       :1780][INFO    ][3156] Running state [/etc/passwd] at time 10:27:26.425883
2018-12-30 10:27:26,426 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/passwd]
2018-12-30 10:27:26,426 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,429 [salt.state       :300 ][INFO    ][3156] File /etc/passwd exists with proper permissions. No changes made.
2018-12-30 10:27:26,430 [salt.state       :1951][INFO    ][3156] Completed state [/etc/passwd] at time 10:27:26.430043 duration_in_ms=4.16
2018-12-30 10:27:26,430 [salt.state       :1780][INFO    ][3156] Running state [/etc/gshadow-] at time 10:27:26.430494
2018-12-30 10:27:26,430 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/gshadow-]
2018-12-30 10:27:26,431 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,432 [salt.state       :300 ][INFO    ][3156] File /etc/gshadow- exists with proper permissions. No changes made.
2018-12-30 10:27:26,433 [salt.state       :1951][INFO    ][3156] Completed state [/etc/gshadow-] at time 10:27:26.433331 duration_in_ms=2.837
2018-12-30 10:27:26,433 [salt.state       :1780][INFO    ][3156] Running state [/etc/group] at time 10:27:26.433777
2018-12-30 10:27:26,434 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/group]
2018-12-30 10:27:26,434 [salt.loaded.int.states.file:2298][WARNING ][3156] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-30 10:27:26,435 [salt.state       :300 ][INFO    ][3156] File /etc/group exists with proper permissions. No changes made.
2018-12-30 10:27:26,436 [salt.state       :1951][INFO    ][3156] Completed state [/etc/group] at time 10:27:26.435988 duration_in_ms=2.21
2018-12-30 10:27:26,437 [salt.state       :1780][INFO    ][3156] Running state [/etc/issue] at time 10:27:26.437852
2018-12-30 10:27:26,438 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/issue]
2018-12-30 10:27:26,442 [salt.state       :300 ][INFO    ][3156] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-12-30 10:27:26,445 [salt.state       :1951][INFO    ][3156] Completed state [/etc/issue] at time 10:27:26.444961 duration_in_ms=7.109
2018-12-30 10:27:26,445 [salt.state       :1780][INFO    ][3156] Running state [/etc/hostname] at time 10:27:26.445427
2018-12-30 10:27:26,445 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/hostname]
2018-12-30 10:27:26,465 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-12-30 10:27:26,479 [salt.state       :300 ][INFO    ][3156] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb02

2018-12-30 10:27:26,481 [salt.state       :1951][INFO    ][3156] Completed state [/etc/hostname] at time 10:27:26.481506 duration_in_ms=36.078
2018-12-30 10:27:26,485 [salt.state       :1780][INFO    ][3156] Running state [hostname mdb02] at time 10:27:26.485499
2018-12-30 10:27:26,485 [salt.state       :1813][INFO    ][3156] Executing state cmd.run for [hostname mdb02]
2018-12-30 10:27:26,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'test "$(hostname)" = "mdb02"' in directory '/root'
2018-12-30 10:27:26,506 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'hostname mdb02' in directory '/root'
2018-12-30 10:27:26,523 [salt.state       :300 ][INFO    ][3156] {'pid': 5199, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-12-30 10:27:26,524 [salt.state       :1951][INFO    ][3156] Completed state [hostname mdb02] at time 10:27:26.524384 duration_in_ms=38.884
2018-12-30 10:27:26,525 [salt.state       :1780][INFO    ][3156] Running state [mdb02] at time 10:27:26.525954
2018-12-30 10:27:26,526 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb02]
2018-12-30 10:27:26,528 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb02'}
2018-12-30 10:27:26,530 [salt.state       :1951][INFO    ][3156] Completed state [mdb02] at time 10:27:26.529155 duration_in_ms=3.2
2018-12-30 10:27:26,530 [salt.state       :1780][INFO    ][3156] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 10:27:26.530344
2018-12-30 10:27:26,530 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,531 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,532 [salt.state       :1951][INFO    ][3156] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 10:27:26.532037 duration_in_ms=1.693
2018-12-30 10:27:26,532 [salt.state       :1780][INFO    ][3156] Running state [mdb03] at time 10:27:26.532425
2018-12-30 10:27:26,532 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb03]
2018-12-30 10:27:26,533 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb03'}
2018-12-30 10:27:26,534 [salt.state       :1951][INFO    ][3156] Completed state [mdb03] at time 10:27:26.534025 duration_in_ms=1.6
2018-12-30 10:27:26,534 [salt.state       :1780][INFO    ][3156] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 10:27:26.534376
2018-12-30 10:27:26,534 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,535 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,536 [salt.state       :1951][INFO    ][3156] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 10:27:26.536226 duration_in_ms=1.85
2018-12-30 10:27:26,536 [salt.state       :1780][INFO    ][3156] Running state [mdb01] at time 10:27:26.536557
2018-12-30 10:27:26,537 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb01]
2018-12-30 10:27:26,538 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb01'}
2018-12-30 10:27:26,538 [salt.state       :1951][INFO    ][3156] Completed state [mdb01] at time 10:27:26.538770 duration_in_ms=2.214
2018-12-30 10:27:26,539 [salt.state       :1780][INFO    ][3156] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 10:27:26.539128
2018-12-30 10:27:26,539 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,541 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,541 [salt.state       :1951][INFO    ][3156] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 10:27:26.541423 duration_in_ms=2.295
2018-12-30 10:27:26,541 [salt.state       :1780][INFO    ][3156] Running state [mdb] at time 10:27:26.541769
2018-12-30 10:27:26,542 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb]
2018-12-30 10:27:26,544 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb'}
2018-12-30 10:27:26,544 [salt.state       :1951][INFO    ][3156] Completed state [mdb] at time 10:27:26.544545 duration_in_ms=2.777
2018-12-30 10:27:26,545 [salt.state       :1780][INFO    ][3156] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 10:27:26.545450
2018-12-30 10:27:26,545 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,546 [salt.state       :300 ][INFO    ][3156] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,546 [salt.state       :1951][INFO    ][3156] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 10:27:26.546736 duration_in_ms=1.286
2018-12-30 10:27:26,547 [salt.state       :1780][INFO    ][3156] Running state [cfg01] at time 10:27:26.547077
2018-12-30 10:27:26,547 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cfg01]
2018-12-30 10:27:26,549 [salt.state       :300 ][INFO    ][3156] {'host': 'cfg01'}
2018-12-30 10:27:26,549 [salt.state       :1951][INFO    ][3156] Completed state [cfg01] at time 10:27:26.549892 duration_in_ms=2.815
2018-12-30 10:27:26,550 [salt.state       :1780][INFO    ][3156] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 10:27:26.550248
2018-12-30 10:27:26,550 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,551 [salt.state       :300 ][INFO    ][3156] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,551 [salt.state       :1951][INFO    ][3156] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 10:27:26.551878 duration_in_ms=1.63
2018-12-30 10:27:26,552 [salt.state       :1780][INFO    ][3156] Running state [prx01] at time 10:27:26.552229
2018-12-30 10:27:26,553 [salt.state       :1813][INFO    ][3156] Executing state host.present for [prx01]
2018-12-30 10:27:26,554 [salt.state       :300 ][INFO    ][3156] {'host': 'prx01'}
2018-12-30 10:27:26,555 [salt.state       :1951][INFO    ][3156] Completed state [prx01] at time 10:27:26.555031 duration_in_ms=2.802
2018-12-30 10:27:26,555 [salt.state       :1780][INFO    ][3156] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 10:27:26.555697
2018-12-30 10:27:26,555 [salt.state       :1813][INFO    ][3156] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,557 [salt.state       :300 ][INFO    ][3156] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,557 [salt.state       :1951][INFO    ][3156] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 10:27:26.557336 duration_in_ms=1.639
2018-12-30 10:27:26,557 [salt.state       :1780][INFO    ][3156] Running state [kvm01] at time 10:27:26.557685
2018-12-30 10:27:26,557 [salt.state       :1813][INFO    ][3156] Executing state host.present for [kvm01]
2018-12-30 10:27:26,558 [salt.state       :300 ][INFO    ][3156] {'host': 'kvm01'}
2018-12-30 10:27:26,559 [salt.state       :1951][INFO    ][3156] Completed state [kvm01] at time 10:27:26.559016 duration_in_ms=1.332
2018-12-30 10:27:26,559 [salt.state       :1780][INFO    ][3156] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 10:27:26.559361
2018-12-30 10:27:26,560 [salt.state       :1813][INFO    ][3156] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,561 [salt.state       :300 ][INFO    ][3156] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,561 [salt.state       :1951][INFO    ][3156] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 10:27:26.561604 duration_in_ms=2.243
2018-12-30 10:27:26,561 [salt.state       :1780][INFO    ][3156] Running state [kvm03] at time 10:27:26.561956
2018-12-30 10:27:26,562 [salt.state       :1813][INFO    ][3156] Executing state host.present for [kvm03]
2018-12-30 10:27:26,563 [salt.state       :300 ][INFO    ][3156] {'host': 'kvm03'}
2018-12-30 10:27:26,563 [salt.state       :1951][INFO    ][3156] Completed state [kvm03] at time 10:27:26.563291 duration_in_ms=1.335
2018-12-30 10:27:26,565 [salt.state       :1780][INFO    ][3156] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 10:27:26.565068
2018-12-30 10:27:26,565 [salt.state       :1813][INFO    ][3156] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,566 [salt.state       :300 ][INFO    ][3156] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,566 [salt.state       :1951][INFO    ][3156] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 10:27:26.566703 duration_in_ms=1.899
2018-12-30 10:27:26,567 [salt.state       :1780][INFO    ][3156] Running state [kvm02] at time 10:27:26.567056
2018-12-30 10:27:26,567 [salt.state       :1813][INFO    ][3156] Executing state host.present for [kvm02]
2018-12-30 10:27:26,569 [salt.state       :300 ][INFO    ][3156] {'host': 'kvm02'}
2018-12-30 10:27:26,569 [salt.state       :1951][INFO    ][3156] Completed state [kvm02] at time 10:27:26.569339 duration_in_ms=2.283
2018-12-30 10:27:26,569 [salt.state       :1780][INFO    ][3156] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 10:27:26.569693
2018-12-30 10:27:26,569 [salt.state       :1813][INFO    ][3156] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,570 [salt.state       :300 ][INFO    ][3156] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,571 [salt.state       :1951][INFO    ][3156] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 10:27:26.571093 duration_in_ms=1.399
2018-12-30 10:27:26,571 [salt.state       :1780][INFO    ][3156] Running state [dbs] at time 10:27:26.571480
2018-12-30 10:27:26,572 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs]
2018-12-30 10:27:26,574 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs'}
2018-12-30 10:27:26,574 [salt.state       :1951][INFO    ][3156] Completed state [dbs] at time 10:27:26.574561 duration_in_ms=3.081
2018-12-30 10:27:26,575 [salt.state       :1780][INFO    ][3156] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 10:27:26.574917
2018-12-30 10:27:26,575 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,577 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,577 [salt.state       :1951][INFO    ][3156] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 10:27:26.577230 duration_in_ms=2.313
2018-12-30 10:27:26,577 [salt.state       :1780][INFO    ][3156] Running state [prx] at time 10:27:26.577606
2018-12-30 10:27:26,577 [salt.state       :1813][INFO    ][3156] Executing state host.present for [prx]
2018-12-30 10:27:26,578 [salt.state       :300 ][INFO    ][3156] {'host': 'prx'}
2018-12-30 10:27:26,579 [salt.state       :1951][INFO    ][3156] Completed state [prx] at time 10:27:26.578968 duration_in_ms=1.362
2018-12-30 10:27:26,579 [salt.state       :1780][INFO    ][3156] Running state [prx.mcp-ovs-dpdk-ha.local] at time 10:27:26.579326
2018-12-30 10:27:26,580 [salt.state       :1813][INFO    ][3156] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,582 [salt.state       :300 ][INFO    ][3156] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,582 [salt.state       :1951][INFO    ][3156] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 10:27:26.582604 duration_in_ms=3.277
2018-12-30 10:27:26,583 [salt.state       :1780][INFO    ][3156] Running state [prx02] at time 10:27:26.582977
2018-12-30 10:27:26,583 [salt.state       :1813][INFO    ][3156] Executing state host.present for [prx02]
2018-12-30 10:27:26,584 [salt.state       :300 ][INFO    ][3156] {'host': 'prx02'}
2018-12-30 10:27:26,585 [salt.state       :1951][INFO    ][3156] Completed state [prx02] at time 10:27:26.585168 duration_in_ms=2.191
2018-12-30 10:27:26,585 [salt.state       :1780][INFO    ][3156] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 10:27:26.585554
2018-12-30 10:27:26,585 [salt.state       :1813][INFO    ][3156] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,586 [salt.state       :300 ][INFO    ][3156] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,586 [salt.state       :1951][INFO    ][3156] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 10:27:26.586921 duration_in_ms=1.367
2018-12-30 10:27:26,587 [salt.state       :1780][INFO    ][3156] Running state [msg02] at time 10:27:26.587273
2018-12-30 10:27:26,587 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg02]
2018-12-30 10:27:26,589 [salt.state       :300 ][INFO    ][3156] {'host': 'msg02'}
2018-12-30 10:27:26,589 [salt.state       :1951][INFO    ][3156] Completed state [msg02] at time 10:27:26.589278 duration_in_ms=2.006
2018-12-30 10:27:26,590 [salt.state       :1780][INFO    ][3156] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 10:27:26.589942
2018-12-30 10:27:26,590 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,592 [salt.state       :300 ][INFO    ][3156] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,592 [salt.state       :1951][INFO    ][3156] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 10:27:26.592208 duration_in_ms=2.267
2018-12-30 10:27:26,593 [salt.state       :1780][INFO    ][3156] Running state [msg03] at time 10:27:26.593126
2018-12-30 10:27:26,593 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg03]
2018-12-30 10:27:26,594 [salt.state       :300 ][INFO    ][3156] {'host': 'msg03'}
2018-12-30 10:27:26,594 [salt.state       :1951][INFO    ][3156] Completed state [msg03] at time 10:27:26.594582 duration_in_ms=1.456
2018-12-30 10:27:26,594 [salt.state       :1780][INFO    ][3156] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 10:27:26.594936
2018-12-30 10:27:26,595 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,597 [salt.state       :300 ][INFO    ][3156] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,597 [salt.state       :1951][INFO    ][3156] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 10:27:26.597592 duration_in_ms=2.656
2018-12-30 10:27:26,597 [salt.state       :1780][INFO    ][3156] Running state [msg01] at time 10:27:26.597961
2018-12-30 10:27:26,598 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg01]
2018-12-30 10:27:26,599 [salt.state       :300 ][INFO    ][3156] {'host': 'msg01'}
2018-12-30 10:27:26,599 [salt.state       :1951][INFO    ][3156] Completed state [msg01] at time 10:27:26.599304 duration_in_ms=1.343
2018-12-30 10:27:26,601 [salt.state       :1780][INFO    ][3156] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 10:27:26.601306
2018-12-30 10:27:26,601 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,602 [salt.state       :300 ][INFO    ][3156] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,603 [salt.state       :1951][INFO    ][3156] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 10:27:26.603019 duration_in_ms=1.713
2018-12-30 10:27:26,603 [salt.state       :1780][INFO    ][3156] Running state [msg] at time 10:27:26.603374
2018-12-30 10:27:26,603 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg]
2018-12-30 10:27:26,606 [salt.state       :300 ][INFO    ][3156] {'host': 'msg'}
2018-12-30 10:27:26,606 [salt.state       :1951][INFO    ][3156] Completed state [msg] at time 10:27:26.606200 duration_in_ms=2.826
2018-12-30 10:27:26,606 [salt.state       :1780][INFO    ][3156] Running state [msg.mcp-ovs-dpdk-ha.local] at time 10:27:26.606573
2018-12-30 10:27:26,606 [salt.state       :1813][INFO    ][3156] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,608 [salt.state       :300 ][INFO    ][3156] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,608 [salt.state       :1951][INFO    ][3156] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 10:27:26.608337 duration_in_ms=1.764
2018-12-30 10:27:26,609 [salt.state       :1780][INFO    ][3156] Running state [cfg01] at time 10:27:26.609052
2018-12-30 10:27:26,609 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cfg01]
2018-12-30 10:27:26,609 [salt.state       :300 ][INFO    ][3156] Host cfg01 (192.168.10.11) already present
2018-12-30 10:27:26,609 [salt.state       :1951][INFO    ][3156] Completed state [cfg01] at time 10:27:26.609922 duration_in_ms=0.869
2018-12-30 10:27:26,610 [salt.state       :1780][INFO    ][3156] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 10:27:26.610270
2018-12-30 10:27:26,610 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,610 [salt.state       :300 ][INFO    ][3156] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2018-12-30 10:27:26,611 [salt.state       :1951][INFO    ][3156] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 10:27:26.611038 duration_in_ms=0.767
2018-12-30 10:27:26,611 [salt.state       :1780][INFO    ][3156] Running state [cmp002] at time 10:27:26.611370
2018-12-30 10:27:26,612 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cmp002]
2018-12-30 10:27:26,614 [salt.state       :300 ][INFO    ][3156] {'host': 'cmp002'}
2018-12-30 10:27:26,614 [salt.state       :1951][INFO    ][3156] Completed state [cmp002] at time 10:27:26.614799 duration_in_ms=3.429
2018-12-30 10:27:26,615 [salt.state       :1780][INFO    ][3156] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 10:27:26.615170
2018-12-30 10:27:26,615 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,617 [salt.state       :300 ][INFO    ][3156] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,617 [salt.state       :1951][INFO    ][3156] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 10:27:26.617793 duration_in_ms=2.622
2018-12-30 10:27:26,618 [salt.state       :1780][INFO    ][3156] Running state [cmp001] at time 10:27:26.618165
2018-12-30 10:27:26,618 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cmp001]
2018-12-30 10:27:26,619 [salt.state       :300 ][INFO    ][3156] {'host': 'cmp001'}
2018-12-30 10:27:26,619 [salt.state       :1951][INFO    ][3156] Completed state [cmp001] at time 10:27:26.619912 duration_in_ms=1.746
2018-12-30 10:27:26,620 [salt.state       :1780][INFO    ][3156] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 10:27:26.620277
2018-12-30 10:27:26,620 [salt.state       :1813][INFO    ][3156] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,621 [salt.state       :300 ][INFO    ][3156] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,622 [salt.state       :1951][INFO    ][3156] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 10:27:26.622065 duration_in_ms=1.789
2018-12-30 10:27:26,622 [salt.state       :1780][INFO    ][3156] Running state [dbs01] at time 10:27:26.622456
2018-12-30 10:27:26,622 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs01]
2018-12-30 10:27:26,623 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs01'}
2018-12-30 10:27:26,623 [salt.state       :1951][INFO    ][3156] Completed state [dbs01] at time 10:27:26.623925 duration_in_ms=1.468
2018-12-30 10:27:26,624 [salt.state       :1780][INFO    ][3156] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 10:27:26.624295
2018-12-30 10:27:26,624 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,626 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,627 [salt.state       :1951][INFO    ][3156] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 10:27:26.626966 duration_in_ms=2.671
2018-12-30 10:27:26,627 [salt.state       :1780][INFO    ][3156] Running state [dbs02] at time 10:27:26.627348
2018-12-30 10:27:26,627 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs02]
2018-12-30 10:27:26,629 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs02'}
2018-12-30 10:27:26,629 [salt.state       :1951][INFO    ][3156] Completed state [dbs02] at time 10:27:26.629511 duration_in_ms=2.163
2018-12-30 10:27:26,629 [salt.state       :1780][INFO    ][3156] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 10:27:26.629883
2018-12-30 10:27:26,630 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,631 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,631 [salt.state       :1951][INFO    ][3156] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 10:27:26.631403 duration_in_ms=1.52
2018-12-30 10:27:26,631 [salt.state       :1780][INFO    ][3156] Running state [dbs03] at time 10:27:26.631783
2018-12-30 10:27:26,632 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs03]
2018-12-30 10:27:26,633 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs03'}
2018-12-30 10:27:26,633 [salt.state       :1951][INFO    ][3156] Completed state [dbs03] at time 10:27:26.633761 duration_in_ms=1.977
2018-12-30 10:27:26,634 [salt.state       :1780][INFO    ][3156] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 10:27:26.634146
2018-12-30 10:27:26,634 [salt.state       :1813][INFO    ][3156] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,636 [salt.state       :300 ][INFO    ][3156] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,636 [salt.state       :1951][INFO    ][3156] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 10:27:26.636259 duration_in_ms=2.113
2018-12-30 10:27:26,638 [salt.state       :1780][INFO    ][3156] Running state [mas01] at time 10:27:26.638011
2018-12-30 10:27:26,638 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mas01]
2018-12-30 10:27:26,639 [salt.state       :300 ][INFO    ][3156] {'host': 'mas01'}
2018-12-30 10:27:26,639 [salt.state       :1951][INFO    ][3156] Completed state [mas01] at time 10:27:26.639494 duration_in_ms=1.483
2018-12-30 10:27:26,639 [salt.state       :1780][INFO    ][3156] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 10:27:26.639876
2018-12-30 10:27:26,640 [salt.state       :1813][INFO    ][3156] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,641 [salt.state       :300 ][INFO    ][3156] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,641 [salt.state       :1951][INFO    ][3156] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 10:27:26.641701 duration_in_ms=1.824
2018-12-30 10:27:26,642 [salt.state       :1780][INFO    ][3156] Running state [ctl02] at time 10:27:26.642072
2018-12-30 10:27:26,642 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl02]
2018-12-30 10:27:26,643 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl02'}
2018-12-30 10:27:26,644 [salt.state       :1951][INFO    ][3156] Completed state [ctl02] at time 10:27:26.644203 duration_in_ms=2.131
2018-12-30 10:27:26,645 [salt.state       :1780][INFO    ][3156] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 10:27:26.645155
2018-12-30 10:27:26,645 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,646 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,647 [salt.state       :1951][INFO    ][3156] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 10:27:26.646959 duration_in_ms=1.804
2018-12-30 10:27:26,647 [salt.state       :1780][INFO    ][3156] Running state [ctl03] at time 10:27:26.647345
2018-12-30 10:27:26,648 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl03]
2018-12-30 10:27:26,649 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl03'}
2018-12-30 10:27:26,649 [salt.state       :1951][INFO    ][3156] Completed state [ctl03] at time 10:27:26.649509 duration_in_ms=2.164
2018-12-30 10:27:26,649 [salt.state       :1780][INFO    ][3156] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 10:27:26.649896
2018-12-30 10:27:26,650 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,651 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,651 [salt.state       :1951][INFO    ][3156] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 10:27:26.651766 duration_in_ms=1.869
2018-12-30 10:27:26,653 [salt.state       :1780][INFO    ][3156] Running state [ctl01] at time 10:27:26.653812
2018-12-30 10:27:26,654 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl01]
2018-12-30 10:27:26,655 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl01'}
2018-12-30 10:27:26,655 [salt.state       :1951][INFO    ][3156] Completed state [ctl01] at time 10:27:26.655477 duration_in_ms=1.665
2018-12-30 10:27:26,656 [salt.state       :1780][INFO    ][3156] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 10:27:26.656510
2018-12-30 10:27:26,657 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,658 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,658 [salt.state       :1951][INFO    ][3156] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 10:27:26.658626 duration_in_ms=2.116
2018-12-30 10:27:26,659 [salt.state       :1780][INFO    ][3156] Running state [ctl] at time 10:27:26.659026
2018-12-30 10:27:26,659 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl]
2018-12-30 10:27:26,660 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl'}
2018-12-30 10:27:26,660 [salt.state       :1951][INFO    ][3156] Completed state [ctl] at time 10:27:26.660567 duration_in_ms=1.541
2018-12-30 10:27:26,661 [salt.state       :1780][INFO    ][3156] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 10:27:26.661255
2018-12-30 10:27:26,661 [salt.state       :1813][INFO    ][3156] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2018-12-30 10:27:26,662 [salt.state       :300 ][INFO    ][3156] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2018-12-30 10:27:26,662 [salt.state       :1951][INFO    ][3156] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 10:27:26.662762 duration_in_ms=1.507
2018-12-30 10:27:26,663 [salt.state       :1780][INFO    ][3156] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 10:27:26.662997
2018-12-30 10:27:26,663 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-12-30 10:27:26,663 [salt.state       :300 ][INFO    ][3156] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-12-30 10:27:26,663 [salt.state       :1951][INFO    ][3156] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 10:27:26.663813 duration_in_ms=0.815
2018-12-30 10:27:26,666 [salt.state       :1780][INFO    ][3156] Running state [ens3] at time 10:27:26.666440
2018-12-30 10:27:26,666 [salt.state       :1813][INFO    ][3156] Executing state network.managed for [ens3]
2018-12-30 10:27:26,863 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['ifup', 'ens3'] in directory '/root'
2018-12-30 10:27:27,809 [salt.state       :300 ][INFO    ][3156] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-12-30 10:27:27,810 [salt.state       :1951][INFO    ][3156] Completed state [ens3] at time 10:27:27.810471 duration_in_ms=1144.029
2018-12-30 10:27:27,811 [salt.state       :1780][INFO    ][3156] Running state [ens2] at time 10:27:27.810976
2018-12-30 10:27:27,811 [salt.state       :1813][INFO    ][3156] Executing state network.managed for [ens2]
2018-12-30 10:27:27,844 [salt.state       :300 ][INFO    ][3156] {'interface': 'Added network interface.'}
2018-12-30 10:27:27,847 [salt.state       :1951][INFO    ][3156] Completed state [ens2] at time 10:27:27.847186 duration_in_ms=36.21
2018-12-30 10:27:27,847 [salt.state       :1780][INFO    ][3156] Running state [linux_system_network] at time 10:27:27.847765
2018-12-30 10:27:27,848 [salt.state       :1813][INFO    ][3156] Executing state network.system for [linux_system_network]
2018-12-30 10:27:27,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-12-30 10:27:27,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-12-30 10:27:27,899 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-12-30 10:27:27,925 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-12-30 10:27:28,489 [salt.loaded.int.module.debian_ip:1964][WARNING ][3156] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-12-30 10:27:28,490 [salt.state       :300 ][INFO    ][3156] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb02\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2018-12-30 10:27:28,490 [salt.state       :1951][INFO    ][3156] Completed state [linux_system_network] at time 10:27:28.490540 duration_in_ms=642.774
2018-12-30 10:27:28,490 [salt.state       :1780][INFO    ][3156] Running state [/etc/profile.d/proxy.sh] at time 10:27:28.490931
2018-12-30 10:27:28,491 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-12-30 10:27:28,491 [salt.state       :300 ][INFO    ][3156] File /etc/profile.d/proxy.sh is not present
2018-12-30 10:27:28,492 [salt.state       :1951][INFO    ][3156] Completed state [/etc/profile.d/proxy.sh] at time 10:27:28.491985 duration_in_ms=1.054
2018-12-30 10:27:28,492 [salt.state       :1780][INFO    ][3156] Running state [/etc/apt/apt.conf.d/95proxies] at time 10:27:28.492208
2018-12-30 10:27:28,492 [salt.state       :1813][INFO    ][3156] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-12-30 10:27:28,492 [salt.state       :300 ][INFO    ][3156] File /etc/apt/apt.conf.d/95proxies is not present
2018-12-30 10:27:28,492 [salt.state       :1951][INFO    ][3156] Completed state [/etc/apt/apt.conf.d/95proxies] at time 10:27:28.492900 duration_in_ms=0.691
2018-12-30 10:27:28,496 [salt.state       :1780][INFO    ][3156] Running state [/dev/shm] at time 10:27:28.496219
2018-12-30 10:27:28,496 [salt.state       :1813][INFO    ][3156] Executing state mount.mounted for [/dev/shm]
2018-12-30 10:27:28,497 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'mount -l' in directory '/root'
2018-12-30 10:27:28,516 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'blkid' in directory '/root'
2018-12-30 10:27:28,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'mount -l' in directory '/root'
2018-12-30 10:27:28,550 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-12-30 10:27:28,566 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'mount -l' in directory '/root'
2018-12-30 10:27:28,584 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-12-30 10:27:28,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'mount -l' in directory '/root'
2018-12-30 10:27:28,622 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'umount /dev/shm' in directory '/root'
2018-12-30 10:27:28,640 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3156] Command '['umount', '/dev/shm']' failed with return code: 32
2018-12-30 10:27:28,641 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3156] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2018-12-30 10:27:28,642 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3156] retcode: 32
2018-12-30 10:27:28,642 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'mount -l' in directory '/root'
2018-12-30 10:27:28,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command 'blkid' in directory '/root'
2018-12-30 10:27:28,685 [salt.state       :300 ][INFO    ][3156] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2018-12-30 10:27:28,685 [salt.state       :1951][INFO    ][3156] Completed state [/dev/shm] at time 10:27:28.685685 duration_in_ms=189.466
2018-12-30 10:27:28,688 [salt.state       :1780][INFO    ][3156] Running state [ntp] at time 10:27:28.688474
2018-12-30 10:27:28,690 [salt.state       :1813][INFO    ][3156] Executing state pkg.installed for [ntp]
2018-12-30 10:27:29,033 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:27:29,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-12-30 10:27:29,111 [salt.minion      :1308][INFO    ][3065] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230102729094873
2018-12-30 10:27:29,139 [salt.minion      :1432][INFO    ][5451] Starting a new job with PID 5451
2018-12-30 10:27:29,160 [salt.minion      :1711][INFO    ][5451] Returning information for job: 20181230102729094873
2018-12-30 10:27:33,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:27:33,707 [salt.state       :300 ][INFO    ][3156] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-12-30 10:27:33,731 [salt.state       :915 ][INFO    ][3156] Loading fresh modules for state activity
2018-12-30 10:27:33,782 [salt.state       :1951][INFO    ][3156] Completed state [ntp] at time 10:27:33.782616 duration_in_ms=5094.141
2018-12-30 10:27:33,789 [salt.state       :1780][INFO    ][3156] Running state [/etc/ntp.conf] at time 10:27:33.789879
2018-12-30 10:27:33,790 [salt.state       :1813][INFO    ][3156] Executing state file.managed for [/etc/ntp.conf]
2018-12-30 10:27:33,814 [salt.fileclient  :1219][INFO    ][3156] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-12-30 10:27:33,902 [salt.state       :300 ][INFO    ][3156] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-12-30 10:27:33,902 [salt.state       :1951][INFO    ][3156] Completed state [/etc/ntp.conf] at time 10:27:33.902771 duration_in_ms=112.891
2018-12-30 10:27:34,426 [salt.state       :1780][INFO    ][3156] Running state [ntp] at time 10:27:34.426791
2018-12-30 10:27:34,427 [salt.state       :1813][INFO    ][3156] Executing state service.running for [ntp]
2018-12-30 10:27:34,427 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-12-30 10:27:34,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-12-30 10:27:34,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-12-30 10:27:34,474 [salt.state       :300 ][INFO    ][3156] The service ntp is already running
2018-12-30 10:27:34,474 [salt.state       :1951][INFO    ][3156] Completed state [ntp] at time 10:27:34.474923 duration_in_ms=48.132
2018-12-30 10:27:34,475 [salt.state       :1780][INFO    ][3156] Running state [ntp] at time 10:27:34.475187
2018-12-30 10:27:34,475 [salt.state       :1813][INFO    ][3156] Executing state service.mod_watch for [ntp]
2018-12-30 10:27:34,476 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-12-30 10:27:34,490 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3156] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-12-30 10:27:34,586 [salt.state       :300 ][INFO    ][3156] {'ntp': True}
2018-12-30 10:27:34,588 [salt.state       :1951][INFO    ][3156] Completed state [ntp] at time 10:27:34.587436 duration_in_ms=112.248
2018-12-30 10:27:34,597 [salt.minion      :1711][INFO    ][3156] Returning information for job: 20181230102648659790
2018-12-30 10:27:39,450 [salt.minion      :1308][INFO    ][3065] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181230102739433107
2018-12-30 10:27:39,474 [salt.minion      :1432][INFO    ][6352] Starting a new job with PID 6352
2018-12-30 10:27:39,499 [salt.minion      :1711][INFO    ][6352] Returning information for job: 20181230102739433107
2018-12-30 10:27:40,210 [salt.minion      :1308][INFO    ][3065] User sudo_ubuntu Executing command system.reboot with jid 20181230102740194248
2018-12-30 10:27:40,227 [salt.minion      :1432][INFO    ][6357] Starting a new job with PID 6357
2018-12-30 10:27:40,238 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6357] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2018-12-30 10:27:40,372 [salt.utils.parsers:1051][WARNING ][3065] Minion received a SIGTERM. Exiting.
2018-12-30 10:27:40,372 [salt.cli.daemons :82  ][INFO    ][3065] Shutting down the Salt Minion
2018-12-30 10:27:41,483 [salt.minion      :1711][INFO    ][6357] Returning information for job: 20181230102740194248
2018-12-30 10:28:03,622 [salt.cli.daemons :293 ][INFO    ][1504] Setting up the Salt Minion "mdb02.mcp-ovs-dpdk-ha.local"
2018-12-30 10:28:04,982 [salt.cli.daemons :82  ][INFO    ][1504] Starting up the Salt Minion
2018-12-30 10:28:04,983 [salt.utils.event :1017][INFO    ][1504] Starting pull socket on /var/run/salt/minion/minion_event_7cf34547b8_pull.ipc
2018-12-30 10:28:08,229 [salt.minion      :976 ][INFO    ][1504] Creating minion process manager
2018-12-30 10:28:10,439 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1504] Executing command ['date', '+%z'] in directory '/root'
2018-12-30 10:28:10,474 [salt.utils.schedule:568 ][INFO    ][1504] Updating job settings for scheduled job: __mine_interval
2018-12-30 10:28:10,476 [salt.minion      :1108][INFO    ][1504] Added mine.update to scheduler
2018-12-30 10:28:10,484 [salt.minion      :1975][INFO    ][1504] Minion is starting as user 'root'
2018-12-30 10:28:10,499 [salt.minion      :2336][INFO    ][1504] Minion is ready to receive requests!
2018-12-30 10:28:11,867 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230102811078145
2018-12-30 10:28:11,885 [salt.minion      :1432][INFO    ][1633] Starting a new job with PID 1633
2018-12-30 10:28:11,992 [salt.minion      :1711][INFO    ][1633] Returning information for job: 20181230102811078145
2018-12-30 10:28:32,640 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command test.ping with jid 20181230102831842615
2018-12-30 10:28:32,672 [salt.minion      :1432][INFO    ][1638] Starting a new job with PID 1638
2018-12-30 10:28:32,755 [salt.minion      :1711][INFO    ][1638] Returning information for job: 20181230102831842615
2018-12-30 10:28:33,470 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command pkg.upgrade with jid 20181230102832676036
2018-12-30 10:28:33,504 [salt.minion      :1432][INFO    ][1643] Starting a new job with PID 1643
2018-12-30 10:28:33,890 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1643] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:28:34,764 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1643] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-12-30 10:28:43,547 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230102842753573
2018-12-30 10:28:43,567 [salt.minion      :1432][INFO    ][1909] Starting a new job with PID 1909
2018-12-30 10:28:43,616 [salt.minion      :1711][INFO    ][1909] Returning information for job: 20181230102842753573
2018-12-30 10:28:53,562 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230102852768825
2018-12-30 10:28:53,604 [salt.minion      :1432][INFO    ][2569] Starting a new job with PID 2569
2018-12-30 10:28:53,643 [salt.minion      :1711][INFO    ][2569] Returning information for job: 20181230102852768825
2018-12-30 10:29:02,565 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1643] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:29:02,610 [salt.minion      :1711][INFO    ][1643] Returning information for job: 20181230102832676036
2018-12-30 10:29:33,466 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command test.ping with jid 20181230102932677897
2018-12-30 10:29:33,490 [salt.minion      :1432][INFO    ][2880] Starting a new job with PID 2880
2018-12-30 10:29:33,526 [salt.minion      :1711][INFO    ][2880] Returning information for job: 20181230102932677897
2018-12-30 10:32:16,286 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230103216283080
2018-12-30 10:32:16,309 [salt.minion      :1432][INFO    ][2885] Starting a new job with PID 2885
2018-12-30 10:32:17,126 [salt.state       :915 ][INFO    ][2885] Loading fresh modules for state activity
2018-12-30 10:32:17,185 [salt.fileclient  :1219][INFO    ][2885] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-12-30 10:32:17,224 [salt.fileclient  :1219][INFO    ][2885] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-12-30 10:32:18,455 [salt.state       :1780][INFO    ][2885] Running state [keepalived] at time 10:32:18.454998
2018-12-30 10:32:18,455 [salt.state       :1813][INFO    ][2885] Executing state pkg.installed for [keepalived]
2018-12-30 10:32:18,456 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:32:18,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-12-30 10:32:18,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 10:32:20,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:32:20,793 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-12-30 10:32:24,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:32:25,011 [salt.state       :300 ][INFO    ][2885] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.2.24-1ubuntu0.16.04.1'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-12-30 10:32:25,035 [salt.state       :915 ][INFO    ][2885] Loading fresh modules for state activity
2018-12-30 10:32:25,069 [salt.state       :1951][INFO    ][2885] Completed state [keepalived] at time 10:32:25.069856 duration_in_ms=6614.857
2018-12-30 10:32:25,075 [salt.state       :1780][INFO    ][2885] Running state [lsof] at time 10:32:25.075739
2018-12-30 10:32:25,076 [salt.state       :1813][INFO    ][2885] Executing state pkg.installed for [lsof]
2018-12-30 10:32:25,682 [salt.state       :300 ][INFO    ][2885] All specified packages are already installed
2018-12-30 10:32:25,683 [salt.state       :1951][INFO    ][2885] Completed state [lsof] at time 10:32:25.683240 duration_in_ms=607.501
2018-12-30 10:32:25,687 [salt.state       :1780][INFO    ][2885] Running state [/etc/keepalived/keepalived.conf] at time 10:32:25.687448
2018-12-30 10:32:25,687 [salt.state       :1813][INFO    ][2885] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-12-30 10:32:25,718 [salt.fileclient  :1219][INFO    ][2885] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-12-30 10:32:25,779 [salt.state       :300 ][INFO    ][2885] File changed:
New file
2018-12-30 10:32:25,779 [salt.state       :1951][INFO    ][2885] Completed state [/etc/keepalived/keepalived.conf] at time 10:32:25.779525 duration_in_ms=92.076
2018-12-30 10:32:25,782 [salt.state       :1780][INFO    ][2885] Running state [keepalived] at time 10:32:25.781994
2018-12-30 10:32:25,782 [salt.state       :1813][INFO    ][2885] Executing state service.running for [keepalived]
2018-12-30 10:32:25,782 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-12-30 10:32:25,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-12-30 10:32:25,823 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-12-30 10:32:25,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-12-30 10:32:25,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-12-30 10:32:25,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-12-30 10:32:25,950 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2885] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-12-30 10:32:25,974 [salt.state       :300 ][INFO    ][2885] {'keepalived': True}
2018-12-30 10:32:25,975 [salt.state       :1951][INFO    ][2885] Completed state [keepalived] at time 10:32:25.975669 duration_in_ms=193.67
2018-12-30 10:32:25,978 [salt.minion      :1711][INFO    ][2885] Returning information for job: 20181230103216283080
2018-12-30 10:32:39,232 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command pillar.get with jid 20181230103239234672
2018-12-30 10:32:39,269 [salt.minion      :1432][INFO    ][4208] Starting a new job with PID 4208
2018-12-30 10:32:39,289 [salt.minion      :1711][INFO    ][4208] Returning information for job: 20181230103239234672
2018-12-30 10:42:40,753 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230104240750570
2018-12-30 10:42:40,769 [salt.minion      :1432][INFO    ][4213] Starting a new job with PID 4213
2018-12-30 10:42:46,697 [salt.state       :915 ][INFO    ][4213] Loading fresh modules for state activity
2018-12-30 10:42:46,742 [salt.fileclient  :1219][INFO    ][4213] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-12-30 10:42:46,774 [salt.fileclient  :1219][INFO    ][4213] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-12-30 10:42:46,804 [salt.fileclient  :1219][INFO    ][4213] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-12-30 10:42:47,511 [salt.state       :1780][INFO    ][4213] Running state [memcached] at time 10:42:47.511109
2018-12-30 10:42:47,511 [salt.state       :1813][INFO    ][4213] Executing state pkg.installed for [memcached]
2018-12-30 10:42:47,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:42:47,865 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-12-30 10:42:47,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 10:42:49,678 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:42:49,701 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-12-30 10:42:50,834 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230104250828634
2018-12-30 10:42:50,855 [salt.minion      :1432][INFO    ][4779] Starting a new job with PID 4779
2018-12-30 10:42:50,894 [salt.minion      :1711][INFO    ][4779] Returning information for job: 20181230104250828634
2018-12-30 10:42:52,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:42:53,035 [salt.state       :300 ][INFO    ][4213] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-12-30 10:42:53,058 [salt.state       :915 ][INFO    ][4213] Loading fresh modules for state activity
2018-12-30 10:42:53,105 [salt.state       :1951][INFO    ][4213] Completed state [memcached] at time 10:42:53.105133 duration_in_ms=5594.025
2018-12-30 10:42:53,111 [salt.state       :1780][INFO    ][4213] Running state [python-memcache] at time 10:42:53.111455
2018-12-30 10:42:53,111 [salt.state       :1813][INFO    ][4213] Executing state pkg.installed for [python-memcache]
2018-12-30 10:42:53,771 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:42:53,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-12-30 10:42:55,515 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:42:55,565 [salt.state       :300 ][INFO    ][4213] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-12-30 10:42:55,583 [salt.state       :915 ][INFO    ][4213] Loading fresh modules for state activity
2018-12-30 10:42:55,628 [salt.state       :1951][INFO    ][4213] Completed state [python-memcache] at time 10:42:55.628845 duration_in_ms=2517.389
2018-12-30 10:42:55,634 [salt.state       :1780][INFO    ][4213] Running state [/etc/memcached.conf] at time 10:42:55.634510
2018-12-30 10:42:55,634 [salt.state       :1813][INFO    ][4213] Executing state file.managed for [/etc/memcached.conf]
2018-12-30 10:42:55,662 [salt.fileclient  :1219][INFO    ][4213] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-12-30 10:42:55,695 [salt.state       :300 ][INFO    ][4213] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-12-30 10:42:55,703 [salt.state       :1951][INFO    ][4213] Completed state [/etc/memcached.conf] at time 10:42:55.703007 duration_in_ms=68.496
2018-12-30 10:42:56,215 [salt.state       :1780][INFO    ][4213] Running state [memcached] at time 10:42:56.215922
2018-12-30 10:42:56,217 [salt.state       :1813][INFO    ][4213] Executing state service.running for [memcached]
2018-12-30 10:42:56,217 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-12-30 10:42:56,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-12-30 10:42:56,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-12-30 10:42:56,262 [salt.state       :300 ][INFO    ][4213] The service memcached is already running
2018-12-30 10:42:56,262 [salt.state       :1951][INFO    ][4213] Completed state [memcached] at time 10:42:56.262361 duration_in_ms=46.438
2018-12-30 10:42:56,262 [salt.state       :1780][INFO    ][4213] Running state [memcached] at time 10:42:56.262617
2018-12-30 10:42:56,262 [salt.state       :1813][INFO    ][4213] Executing state service.mod_watch for [memcached]
2018-12-30 10:42:56,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-12-30 10:42:56,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4213] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-12-30 10:42:56,302 [salt.state       :300 ][INFO    ][4213] {'memcached': True}
2018-12-30 10:42:56,303 [salt.state       :1951][INFO    ][4213] Completed state [memcached] at time 10:42:56.303082 duration_in_ms=40.465
2018-12-30 10:42:56,305 [salt.minion      :1711][INFO    ][4213] Returning information for job: 20181230104240750570
2018-12-30 10:42:57,937 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230104257935649
2018-12-30 10:42:57,961 [salt.minion      :1432][INFO    ][5195] Starting a new job with PID 5195
2018-12-30 10:42:59,231 [salt.state       :915 ][INFO    ][5195] Loading fresh modules for state activity
2018-12-30 10:42:59,282 [salt.fileclient  :1219][INFO    ][5195] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-12-30 10:42:59,315 [salt.fileclient  :1219][INFO    ][5195] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-12-30 10:43:00,098 [salt.state       :1780][INFO    ][5195] Running state [haproxy] at time 10:43:00.098151
2018-12-30 10:43:00,099 [salt.state       :1813][INFO    ][5195] Executing state pkg.installed for [haproxy]
2018-12-30 10:43:00,101 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:43:00,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-12-30 10:43:00,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 10:43:02,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:43:02,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-12-30 10:43:06,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:43:06,618 [salt.state       :300 ][INFO    ][5195] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-12-30 10:43:06,641 [salt.state       :915 ][INFO    ][5195] Loading fresh modules for state activity
2018-12-30 10:43:06,682 [salt.state       :1951][INFO    ][5195] Completed state [haproxy] at time 10:43:06.682120 duration_in_ms=6583.97
2018-12-30 10:43:06,687 [salt.state       :1780][INFO    ][5195] Running state [/etc/default/haproxy] at time 10:43:06.687302
2018-12-30 10:43:06,687 [salt.state       :1813][INFO    ][5195] Executing state file.managed for [/etc/default/haproxy]
2018-12-30 10:43:06,722 [salt.fileclient  :1219][INFO    ][5195] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-12-30 10:43:06,725 [salt.state       :300 ][INFO    ][5195] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-12-30 10:43:06,728 [salt.state       :1951][INFO    ][5195] Completed state [/etc/default/haproxy] at time 10:43:06.728375 duration_in_ms=41.072
2018-12-30 10:43:06,728 [salt.state       :1780][INFO    ][5195] Running state [/etc/haproxy/haproxy.cfg] at time 10:43:06.728916
2018-12-30 10:43:06,729 [salt.state       :1813][INFO    ][5195] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-12-30 10:43:06,750 [salt.fileclient  :1219][INFO    ][5195] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-12-30 10:43:06,920 [salt.state       :300 ][INFO    ][5195] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-12-30 10:43:06,928 [salt.state       :1951][INFO    ][5195] Completed state [/etc/haproxy/haproxy.cfg] at time 10:43:06.928855 duration_in_ms=199.938
2018-12-30 10:43:06,929 [salt.state       :1780][INFO    ][5195] Running state [/etc/haproxy/ssl] at time 10:43:06.929287
2018-12-30 10:43:06,930 [salt.state       :1813][INFO    ][5195] Executing state file.directory for [/etc/haproxy/ssl]
2018-12-30 10:43:06,931 [salt.state       :300 ][INFO    ][5195] {'/etc/haproxy/ssl': 'New Dir'}
2018-12-30 10:43:06,932 [salt.state       :1951][INFO    ][5195] Completed state [/etc/haproxy/ssl] at time 10:43:06.931982 duration_in_ms=2.695
2018-12-30 10:43:06,932 [salt.state       :1780][INFO    ][5195] Running state [/etc/haproxy/errors/429.http11] at time 10:43:06.932257
2018-12-30 10:43:06,939 [salt.state       :1813][INFO    ][5195] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-12-30 10:43:06,975 [salt.fileclient  :1219][INFO    ][5195] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-12-30 10:43:06,985 [salt.state       :300 ][INFO    ][5195] File changed:
New file
2018-12-30 10:43:06,986 [salt.state       :1951][INFO    ][5195] Completed state [/etc/haproxy/errors/429.http11] at time 10:43:06.986387 duration_in_ms=54.13
2018-12-30 10:43:06,987 [salt.state       :1780][INFO    ][5195] Running state [haproxy_status_packages] at time 10:43:06.987827
2018-12-30 10:43:06,988 [salt.state       :1813][INFO    ][5195] Executing state pkg.installed for [haproxy_status_packages]
2018-12-30 10:43:07,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 10:43:07,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-12-30 10:43:08,034 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230104308028090
2018-12-30 10:43:08,062 [salt.minion      :1432][INFO    ][6018] Starting a new job with PID 6018
2018-12-30 10:43:08,080 [salt.minion      :1711][INFO    ][6018] Returning information for job: 20181230104308028090
2018-12-30 10:43:09,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 10:43:09,846 [salt.state       :300 ][INFO    ][5195] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-12-30 10:43:09,864 [salt.state       :915 ][INFO    ][5195] Loading fresh modules for state activity
2018-12-30 10:43:09,911 [salt.state       :1951][INFO    ][5195] Completed state [haproxy_status_packages] at time 10:43:09.911742 duration_in_ms=2923.914
2018-12-30 10:43:09,915 [salt.state       :1780][INFO    ][5195] Running state [/usr/bin/haproxy-status.sh] at time 10:43:09.915414
2018-12-30 10:43:09,915 [salt.state       :1813][INFO    ][5195] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-12-30 10:43:09,941 [salt.fileclient  :1219][INFO    ][5195] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-12-30 10:43:09,971 [salt.state       :300 ][INFO    ][5195] File changed:
New file
2018-12-30 10:43:09,972 [salt.state       :1951][INFO    ][5195] Completed state [/usr/bin/haproxy-status.sh] at time 10:43:09.972101 duration_in_ms=56.687
2018-12-30 10:43:09,975 [salt.state       :1780][INFO    ][5195] Running state [net.ipv4.ip_nonlocal_bind] at time 10:43:09.975661
2018-12-30 10:43:09,976 [salt.state       :1813][INFO    ][5195] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-12-30 10:43:09,979 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-12-30 10:43:09,992 [salt.state       :300 ][INFO    ][5195] {'net.ipv4.ip_nonlocal_bind': 1}
2018-12-30 10:43:09,993 [salt.state       :1951][INFO    ][5195] Completed state [net.ipv4.ip_nonlocal_bind] at time 10:43:09.993309 duration_in_ms=17.648
2018-12-30 10:43:10,513 [salt.state       :1780][INFO    ][5195] Running state [haproxy] at time 10:43:10.513117
2018-12-30 10:43:10,513 [salt.state       :1813][INFO    ][5195] Executing state service.running for [haproxy]
2018-12-30 10:43:10,514 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-12-30 10:43:10,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-12-30 10:43:10,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-12-30 10:43:10,572 [salt.state       :300 ][INFO    ][5195] The service haproxy is already running
2018-12-30 10:43:10,573 [salt.state       :1951][INFO    ][5195] Completed state [haproxy] at time 10:43:10.573419 duration_in_ms=60.295
2018-12-30 10:43:10,574 [salt.state       :1780][INFO    ][5195] Running state [haproxy] at time 10:43:10.574515
2018-12-30 10:43:10,575 [salt.state       :1813][INFO    ][5195] Executing state service.mod_watch for [haproxy]
2018-12-30 10:43:10,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-12-30 10:43:10,597 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5195] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-12-30 10:43:10,641 [salt.state       :300 ][INFO    ][5195] {'haproxy': True}
2018-12-30 10:43:10,643 [salt.state       :1951][INFO    ][5195] Completed state [haproxy] at time 10:43:10.643345 duration_in_ms=68.829
2018-12-30 10:43:10,655 [salt.minion      :1711][INFO    ][5195] Returning information for job: 20181230104257935649
2018-12-30 10:43:12,075 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command service.status with jid 20181230104312071252
2018-12-30 10:43:12,099 [salt.minion      :1432][INFO    ][6341] Starting a new job with PID 6341
2018-12-30 10:43:12,631 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6341] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-12-30 10:43:12,653 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6341] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-12-30 10:43:12,672 [salt.minion      :1711][INFO    ][6341] Returning information for job: 20181230104312071252
2018-12-30 10:43:13,704 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command service.restart with jid 20181230104313701653
2018-12-30 10:43:13,727 [salt.minion      :1432][INFO    ][6351] Starting a new job with PID 6351
2018-12-30 10:43:14,234 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6351] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-12-30 10:43:14,275 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6351] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-12-30 10:43:14,318 [salt.minion      :1711][INFO    ][6351] Returning information for job: 20181230104313701653
2018-12-30 11:06:48,190 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230110648191695
2018-12-30 11:06:48,214 [salt.minion      :1432][INFO    ][6400] Starting a new job with PID 6400
2018-12-30 11:06:49,074 [salt.state       :915 ][INFO    ][6400] Loading fresh modules for state activity
2018-12-30 11:06:49,134 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-12-30 11:06:49,172 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-12-30 11:06:49,210 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-12-30 11:06:49,257 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-12-30 11:06:50,099 [salt.state       :1780][INFO    ][6400] Running state [redis-server] at time 11:06:50.099863
2018-12-30 11:06:50,100 [salt.state       :1813][INFO    ][6400] Executing state pkg.installed for [redis-server]
2018-12-30 11:06:50,101 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:06:50,485 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-12-30 11:06:50,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 11:06:52,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:06:52,715 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-12-30 11:06:57,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:06:57,110 [salt.state       :300 ][INFO    ][6400] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2018-12-30 11:06:57,134 [salt.state       :915 ][INFO    ][6400] Loading fresh modules for state activity
2018-12-30 11:06:57,181 [salt.state       :1951][INFO    ][6400] Completed state [redis-server] at time 11:06:57.181173 duration_in_ms=7081.311
2018-12-30 11:06:57,188 [salt.state       :1780][INFO    ][6400] Running state [vm.overcommit_memory] at time 11:06:57.187995
2018-12-30 11:06:57,188 [salt.state       :1813][INFO    ][6400] Executing state sysctl.present for [vm.overcommit_memory]
2018-12-30 11:06:57,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-12-30 11:06:57,207 [salt.state       :300 ][INFO    ][6400] {'vm.overcommit_memory': 1}
2018-12-30 11:06:57,207 [salt.state       :1951][INFO    ][6400] Completed state [vm.overcommit_memory] at time 11:06:57.207657 duration_in_ms=19.66
2018-12-30 11:06:57,211 [salt.state       :1780][INFO    ][6400] Running state [/etc/redis/redis.conf] at time 11:06:57.211941
2018-12-30 11:06:57,212 [salt.state       :1813][INFO    ][6400] Executing state file.managed for [/etc/redis/redis.conf]
2018-12-30 11:06:57,246 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2018-12-30 11:06:57,330 [salt.state       :300 ][INFO    ][6400] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 192.168.10.33
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -284,6 +283,7 @@
 #    and resynchronize with them.
 #
 # replicaof <masterip> <masterport>
+replicaof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the replica to authenticate before
@@ -695,7 +695,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -725,9 +724,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1372,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2018-12-30 11:06:57,337 [salt.state       :1951][INFO    ][6400] Completed state [/etc/redis/redis.conf] at time 11:06:57.337036 duration_in_ms=125.095
2018-12-30 11:06:57,926 [salt.state       :1780][INFO    ][6400] Running state [redis-server] at time 11:06:57.926327
2018-12-30 11:06:57,927 [salt.state       :1813][INFO    ][6400] Executing state service.running for [redis-server]
2018-12-30 11:06:57,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-12-30 11:06:57,956 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-12-30 11:06:57,982 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-12-30 11:06:58,006 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2018-12-30 11:06:58,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-12-30 11:06:58,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-12-30 11:06:58,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-12-30 11:06:58,171 [salt.state       :300 ][INFO    ][6400] {'redis-server': True}
2018-12-30 11:06:58,171 [salt.state       :1951][INFO    ][6400] Completed state [redis-server] at time 11:06:58.171584 duration_in_ms=245.256
2018-12-30 11:06:58,174 [salt.state       :1780][INFO    ][6400] Running state [redis-sentinel] at time 11:06:58.173955
2018-12-30 11:06:58,174 [salt.state       :1813][INFO    ][6400] Executing state pkg.installed for [redis-sentinel]
2018-12-30 11:06:58,208 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230110658213472
2018-12-30 11:06:58,228 [salt.minion      :1432][INFO    ][7329] Starting a new job with PID 7329
2018-12-30 11:06:58,246 [salt.minion      :1711][INFO    ][7329] Returning information for job: 20181230110658213472
2018-12-30 11:06:58,440 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:06:58,473 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-12-30 11:07:01,967 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:07:02,025 [salt.state       :300 ][INFO    ][6400] Made the following changes:
'redis-sentinel' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'

2018-12-30 11:07:02,046 [salt.state       :915 ][INFO    ][6400] Loading fresh modules for state activity
2018-12-30 11:07:02,089 [salt.state       :1951][INFO    ][6400] Completed state [redis-sentinel] at time 11:07:02.089607 duration_in_ms=3915.652
2018-12-30 11:07:02,651 [salt.state       :1780][INFO    ][6400] Running state [/etc/redis/sentinel.conf] at time 11:07:02.651454
2018-12-30 11:07:02,652 [salt.state       :1813][INFO    ][6400] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-12-30 11:07:02,677 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/sentinel.conf'
2018-12-30 11:07:02,720 [salt.state       :300 ][INFO    ][6400] File changed:
--- 
+++ 
@@ -1,7 +1,3 @@
-# Example sentinel.conf
-
-# *** IMPORTANT ***
-#
 # By default Sentinel will not be reachable from interfaces different than
 # localhost, either use the 'bind' directive to bind to a list of network
 # interfaces, or disable protected mode with "protected-mode no" by
@@ -13,7 +9,7 @@
 # For example you may use one of the following:
 #
 # bind 127.0.0.1 192.168.1.1
-bind 127.0.0.1 ::1
+bind 192.168.10.33
 #
 # protected-mode no
 
@@ -82,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -111,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -119,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -144,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -168,7 +164,7 @@
 # NOTIFICATION SCRIPT
 #
 # sentinel notification-script <master-name> <script-path>
-# 
+#
 # Call the specified notification script for any sentinel event that is
 # generated in the WARNING level (for instance -sdown, -odown, and so forth).
 # This script should notify the system administrator via email, SMS, or any
@@ -192,14 +188,14 @@
 # When the master changed because of a failover a script can be called in
 # order to perform application-specific tasks to notify the clients that the
 # configuration has changed and the master is at a different address.
-# 
+#
 # The following arguments are passed to the script:
 #
 # <master-name> <role> <state> <from-ip> <from-port> <to-ip> <to-port>
 #
 # <state> is currently always "failover"
 # <role> is either "leader" or "observer"
-# 
+#
 # The arguments from-ip, from-port, to-ip, to-port are used to communicate
 # the old address of the master and the new address of the elected replica
 # (now a master).

2018-12-30 11:07:02,728 [salt.state       :1951][INFO    ][6400] Completed state [/etc/redis/sentinel.conf] at time 11:07:02.728905 duration_in_ms=77.451
2018-12-30 11:07:02,729 [salt.state       :1780][INFO    ][6400] Running state [redis-sentinel] at time 11:07:02.729229
2018-12-30 11:07:02,730 [salt.state       :1813][INFO    ][6400] Executing state service.running for [redis-sentinel]
2018-12-30 11:07:02,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-12-30 11:07:02,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-12-30 11:07:02,785 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-12-30 11:07:02,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-sentinel.service'] in directory '/root'
2018-12-30 11:07:02,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-12-30 11:07:02,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-12-30 11:07:02,959 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-12-30 11:07:02,980 [salt.state       :300 ][INFO    ][6400] {'redis-sentinel': True}
2018-12-30 11:07:02,981 [salt.state       :1951][INFO    ][6400] Completed state [redis-sentinel] at time 11:07:02.981339 duration_in_ms=252.108
2018-12-30 11:07:02,983 [salt.minion      :1711][INFO    ][6400] Returning information for job: 20181230110648191695
2018-12-30 11:07:03,723 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command test.ping with jid 20181230110703725460
2018-12-30 11:07:03,748 [salt.minion      :1432][INFO    ][7833] Starting a new job with PID 7833
2018-12-30 11:07:03,771 [salt.minion      :1711][INFO    ][7833] Returning information for job: 20181230110703725460
2018-12-30 11:09:02,542 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230110902543510
2018-12-30 11:09:02,566 [salt.minion      :1432][INFO    ][7838] Starting a new job with PID 7838
2018-12-30 11:09:08,386 [salt.state       :915 ][INFO    ][7838] Loading fresh modules for state activity
2018-12-30 11:09:08,447 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-12-30 11:09:08,490 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-12-30 11:09:08,577 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-12-30 11:09:08,614 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-12-30 11:09:08,660 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-12-30 11:09:08,754 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-12-30 11:09:08,844 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-12-30 11:09:08,934 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-12-30 11:09:09,092 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-12-30 11:09:09,178 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-12-30 11:09:09,252 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-12-30 11:09:09,311 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-12-30 11:09:10,187 [salt.state       :1780][INFO    ][7838] Running state [apache2] at time 11:09:10.187606
2018-12-30 11:09:10,188 [salt.state       :1813][INFO    ][7838] Executing state pkg.installed for [apache2]
2018-12-30 11:09:10,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:09:10,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-12-30 11:09:10,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 11:09:12,598 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230110912595642
2018-12-30 11:09:12,617 [salt.minion      :1432][INFO    ][8167] Starting a new job with PID 8167
2018-12-30 11:09:12,636 [salt.minion      :1711][INFO    ][8167] Returning information for job: 20181230110912595642
2018-12-30 11:09:12,813 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:09:12,850 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-12-30 11:09:21,104 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:09:21,158 [salt.state       :300 ][INFO    ][7838] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-12-30 11:09:21,184 [salt.state       :915 ][INFO    ][7838] Loading fresh modules for state activity
2018-12-30 11:09:21,233 [salt.state       :1951][INFO    ][7838] Completed state [apache2] at time 11:09:21.233037 duration_in_ms=11045.431
2018-12-30 11:09:21,240 [salt.state       :1780][INFO    ][7838] Running state [openssl] at time 11:09:21.240229
2018-12-30 11:09:21,240 [salt.state       :1813][INFO    ][7838] Executing state pkg.installed for [openssl]
2018-12-30 11:09:22,076 [salt.state       :300 ][INFO    ][7838] All specified packages are already installed
2018-12-30 11:09:22,076 [salt.state       :1951][INFO    ][7838] Completed state [openssl] at time 11:09:22.076507 duration_in_ms=836.275
2018-12-30 11:09:22,078 [salt.state       :1780][INFO    ][7838] Running state [a2enmod rewrite] at time 11:09:22.078691
2018-12-30 11:09:22,078 [salt.state       :1813][INFO    ][7838] Executing state cmd.run for [a2enmod rewrite]
2018-12-30 11:09:22,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command 'a2enmod rewrite' in directory '/root'
2018-12-30 11:09:22,149 [salt.state       :300 ][INFO    ][7838] {'pid': 9323, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-12-30 11:09:22,151 [salt.state       :1951][INFO    ][7838] Completed state [a2enmod rewrite] at time 11:09:22.151849 duration_in_ms=73.158
2018-12-30 11:09:22,153 [salt.state       :1780][INFO    ][7838] Running state [libapache2-mod-wsgi] at time 11:09:22.153464
2018-12-30 11:09:22,154 [salt.state       :1813][INFO    ][7838] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-12-30 11:09:22,185 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:09:22,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-12-30 11:09:22,735 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230110922737100
2018-12-30 11:09:22,751 [salt.minion      :1432][INFO    ][9365] Starting a new job with PID 9365
2018-12-30 11:09:22,768 [salt.minion      :1711][INFO    ][9365] Returning information for job: 20181230110922737100
2018-12-30 11:09:27,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:09:27,104 [salt.state       :300 ][INFO    ][7838] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'

2018-12-30 11:09:27,124 [salt.state       :915 ][INFO    ][7838] Loading fresh modules for state activity
2018-12-30 11:09:27,164 [salt.state       :1951][INFO    ][7838] Completed state [libapache2-mod-wsgi] at time 11:09:27.164305 duration_in_ms=5010.842
2018-12-30 11:09:27,166 [salt.state       :1780][INFO    ][7838] Running state [a2enmod wsgi] at time 11:09:27.166867
2018-12-30 11:09:27,167 [salt.state       :1813][INFO    ][7838] Executing state cmd.run for [a2enmod wsgi]
2018-12-30 11:09:27,168 [salt.state       :300 ][INFO    ][7838] /etc/apache2/mods-enabled/wsgi.load exists
2018-12-30 11:09:27,168 [salt.state       :1951][INFO    ][7838] Completed state [a2enmod wsgi] at time 11:09:27.168358 duration_in_ms=1.492
2018-12-30 11:09:27,172 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 11:09:27.172569
2018-12-30 11:09:27,172 [salt.state       :1813][INFO    ][7838] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-12-30 11:09:27,215 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-12-30 11:09:27,283 [salt.state       :300 ][INFO    ][7838] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-12-30 11:09:27,283 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 11:09:27.283792 duration_in_ms=111.223
2018-12-30 11:09:27,284 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 11:09:27.284010
2018-12-30 11:09:27,284 [salt.state       :1813][INFO    ][7838] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-12-30 11:09:27,285 [salt.state       :300 ][INFO    ][7838] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-12-30 11:09:27,285 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 11:09:27.285136 duration_in_ms=1.126
2018-12-30 11:09:27,285 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 11:09:27.285337
2018-12-30 11:09:27,285 [salt.state       :1813][INFO    ][7838] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-12-30 11:09:27,285 [salt.state       :300 ][INFO    ][7838] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-12-30 11:09:27,286 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 11:09:27.285997 duration_in_ms=0.66
2018-12-30 11:09:27,286 [salt.state       :1780][INFO    ][7838] Running state [a2enmod mpm_prefork] at time 11:09:27.286701
2018-12-30 11:09:27,287 [salt.state       :1813][INFO    ][7838] Executing state cmd.run for [a2enmod mpm_prefork]
2018-12-30 11:09:27,292 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-12-30 11:09:27,349 [salt.state       :300 ][INFO    ][7838] {'pid': 9664, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-12-30 11:09:27,350 [salt.state       :1951][INFO    ][7838] Completed state [a2enmod mpm_prefork] at time 11:09:27.350013 duration_in_ms=63.312
2018-12-30 11:09:27,350 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 11:09:27.350439
2018-12-30 11:09:27,350 [salt.state       :1813][INFO    ][7838] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-12-30 11:09:27,351 [salt.state       :300 ][INFO    ][7838] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-12-30 11:09:27,351 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 11:09:27.351385 duration_in_ms=0.946
2018-12-30 11:09:27,351 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 11:09:27.351605
2018-12-30 11:09:27,351 [salt.state       :1813][INFO    ][7838] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-12-30 11:09:27,352 [salt.state       :300 ][INFO    ][7838] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-12-30 11:09:27,352 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 11:09:27.352269 duration_in_ms=0.665
2018-12-30 11:09:27,357 [salt.state       :1780][INFO    ][7838] Running state [apache_server_service_task] at time 11:09:27.357296
2018-12-30 11:09:27,357 [salt.state       :1813][INFO    ][7838] Executing state test.show_notification for [apache_server_service_task]
2018-12-30 11:09:27,357 [salt.state       :300 ][INFO    ][7838] Running apache.server.service
2018-12-30 11:09:27,357 [salt.state       :1951][INFO    ][7838] Completed state [apache_server_service_task] at time 11:09:27.357918 duration_in_ms=0.622
2018-12-30 11:09:27,358 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/ports.conf] at time 11:09:27.358405
2018-12-30 11:09:27,358 [salt.state       :1813][INFO    ][7838] Executing state file.managed for [/etc/apache2/ports.conf]
2018-12-30 11:09:27,381 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-12-30 11:09:27,453 [salt.state       :300 ][INFO    ][7838] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-12-30 11:09:27,453 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/ports.conf] at time 11:09:27.453488 duration_in_ms=95.083
2018-12-30 11:09:27,453 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/conf-available/security.conf] at time 11:09:27.453876
2018-12-30 11:09:27,454 [salt.state       :1813][INFO    ][7838] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-12-30 11:09:27,483 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-12-30 11:09:27,550 [salt.state       :300 ][INFO    ][7838] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-12-30 11:09:27,550 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/conf-available/security.conf] at time 11:09:27.550372 duration_in_ms=96.495
2018-12-30 11:09:28,123 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 11:09:28.123499
2018-12-30 11:09:28,123 [salt.state       :1813][INFO    ][7838] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-12-30 11:09:28,124 [salt.state       :300 ][INFO    ][7838] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-12-30 11:09:28,125 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 11:09:28.125133 duration_in_ms=1.635
2018-12-30 11:09:28,125 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 11:09:28.125528
2018-12-30 11:09:28,125 [salt.state       :1813][INFO    ][7838] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-12-30 11:09:28,151 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-12-30 11:09:28,190 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-12-30 11:09:28,270 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-12-30 11:09:28,303 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-12-30 11:09:28,403 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-12-30 11:09:28,432 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-12-30 11:09:28,467 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-12-30 11:09:28,486 [salt.state       :300 ][INFO    ][7838] File changed:
New file
2018-12-30 11:09:28,488 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 11:09:28.488076 duration_in_ms=362.546
2018-12-30 11:09:28,489 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 11:09:28.489152
2018-12-30 11:09:28,489 [salt.state       :1813][INFO    ][7838] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-12-30 11:09:28,786 [salt.state       :300 ][INFO    ][7838] File changed:
New file
2018-12-30 11:09:28,786 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 11:09:28.786735 duration_in_ms=297.583
2018-12-30 11:09:28,789 [salt.state       :1780][INFO    ][7838] Running state [apache2] at time 11:09:28.789208
2018-12-30 11:09:28,789 [salt.state       :1813][INFO    ][7838] Executing state service.running for [apache2]
2018-12-30 11:09:28,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-12-30 11:09:28,818 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:09:28,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:09:28,866 [salt.state       :300 ][INFO    ][7838] The service apache2 is already running
2018-12-30 11:09:28,868 [salt.state       :1951][INFO    ][7838] Completed state [apache2] at time 11:09:28.867659 duration_in_ms=78.449
2018-12-30 11:09:28,868 [salt.state       :1780][INFO    ][7838] Running state [apache2] at time 11:09:28.868946
2018-12-30 11:09:28,869 [salt.state       :1813][INFO    ][7838] Executing state service.mod_watch for [apache2]
2018-12-30 11:09:28,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:09:28,892 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-12-30 11:09:29,082 [salt.state       :300 ][INFO    ][7838] {'apache2': True}
2018-12-30 11:09:29,082 [salt.state       :1951][INFO    ][7838] Completed state [apache2] at time 11:09:29.082471 duration_in_ms=213.524
2018-12-30 11:09:29,085 [salt.state       :1780][INFO    ][7838] Running state [/etc/apache2/conf-enabled/security.conf] at time 11:09:29.084285
2018-12-30 11:09:29,086 [salt.state       :1813][INFO    ][7838] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-12-30 11:09:29,098 [salt.state       :300 ][INFO    ][7838] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-12-30 11:09:29,098 [salt.state       :1951][INFO    ][7838] Completed state [/etc/apache2/conf-enabled/security.conf] at time 11:09:29.098563 duration_in_ms=14.278
2018-12-30 11:09:29,100 [salt.state       :1780][INFO    ][7838] Running state [gnocchi-common] at time 11:09:29.100725
2018-12-30 11:09:29,100 [salt.state       :1813][INFO    ][7838] Executing state pkg.installed for [gnocchi-common]
2018-12-30 11:09:29,363 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:09:29,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-12-30 11:09:32,865 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230110932865388
2018-12-30 11:09:32,877 [salt.minion      :1432][INFO    ][10007] Starting a new job with PID 10007
2018-12-30 11:09:32,897 [salt.minion      :1711][INFO    ][10007] Returning information for job: 20181230110932865388
2018-12-30 11:09:42,994 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230110942992934
2018-12-30 11:09:43,015 [salt.minion      :1432][INFO    ][11057] Starting a new job with PID 11057
2018-12-30 11:09:43,048 [salt.minion      :1711][INFO    ][11057] Returning information for job: 20181230110942992934
2018-12-30 11:09:53,148 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230110953148559
2018-12-30 11:09:53,168 [salt.minion      :1432][INFO    ][12075] Starting a new job with PID 12075
2018-12-30 11:09:53,191 [salt.minion      :1711][INFO    ][12075] Returning information for job: 20181230110953148559
2018-12-30 11:10:03,289 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111003290388
2018-12-30 11:10:03,301 [salt.minion      :1432][INFO    ][12589] Starting a new job with PID 12589
2018-12-30 11:10:03,316 [salt.minion      :1711][INFO    ][12589] Returning information for job: 20181230111003290388
2018-12-30 11:10:05,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:10:05,997 [salt.state       :300 ][INFO    ][7838] Made the following changes:
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-os-service-types' changed from 'absent' to '1.3.0-1~u16.04+mcp'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-editor' changed from 'absent' to '0.4-2'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~u16.04+mcp'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.40.0-1~u16.04+mcp'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'liblapack.so.3' changed from 'absent' to '1'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.21.0-1~u16.04+mcp'
'python-oslo.cache' changed from 'absent' to '1.30.1-1~u16.04+mcp6'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python-lxml' changed from 'absent' to '3.5.0-1ubuntu0.1'
'python-oslo.config' changed from 'absent' to '1:6.4.0-1~u16.04+mcp'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'python2.7-testscenarios' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.27.0-1~u16.04+mcp'
'python-oslo.utils' changed from 'absent' to '3.36.4-1~u16.04+mcp'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.21.0-1~u16.04+mcp'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python2.7-simplejson' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.39.0-1~u16.04+mcp'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-pbr' changed from 'absent' to '4.2.0-4~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.3.0-1~u16.04+mcp'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp4'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-keystoneclient' changed from 'absent' to '1:3.17.0-1~u16.04+mcp4'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystoneauth1' changed from 'absent' to '3.10.0-1~u16.04+mcp10'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp8'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-12-30 11:10:06,029 [salt.state       :915 ][INFO    ][7838] Loading fresh modules for state activity
2018-12-30 11:10:06,095 [salt.state       :1951][INFO    ][7838] Completed state [gnocchi-common] at time 11:10:06.095780 duration_in_ms=36995.055
2018-12-30 11:10:06,101 [salt.state       :1780][INFO    ][7838] Running state [gnocchi_ssl_mysql] at time 11:10:06.101848
2018-12-30 11:10:06,102 [salt.state       :1813][INFO    ][7838] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-12-30 11:10:06,102 [salt.state       :300 ][INFO    ][7838] Running gnocchi._ssl.mysql
2018-12-30 11:10:06,102 [salt.state       :1951][INFO    ][7838] Completed state [gnocchi_ssl_mysql] at time 11:10:06.102895 duration_in_ms=1.046
2018-12-30 11:10:06,106 [salt.state       :1780][INFO    ][7838] Running state [/etc/gnocchi/gnocchi.conf] at time 11:10:06.106635
2018-12-30 11:10:06,106 [salt.state       :1813][INFO    ][7838] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-12-30 11:10:06,139 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-12-30 11:10:06,268 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-12-30 11:10:06,293 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-12-30 11:10:06,332 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-12-30 11:10:06,380 [salt.fileclient  :1219][INFO    ][7838] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-12-30 11:10:06,390 [salt.state       :300 ][INFO    ][7838] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.33:6379

2018-12-30 11:10:06,391 [salt.state       :1951][INFO    ][7838] Completed state [/etc/gnocchi/gnocchi.conf] at time 11:10:06.391274 duration_in_ms=284.637
2018-12-30 11:10:06,395 [salt.state       :1780][INFO    ][7838] Running state [gnocchi-api] at time 11:10:06.395896
2018-12-30 11:10:06,396 [salt.state       :1813][INFO    ][7838] Executing state pkg.installed for [gnocchi-api]
2018-12-30 11:10:08,051 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:10:08,088 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-12-30 11:10:13,408 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111013414129
2018-12-30 11:10:13,435 [salt.minion      :1432][INFO    ][13511] Starting a new job with PID 13511
2018-12-30 11:10:13,453 [salt.minion      :1711][INFO    ][13511] Returning information for job: 20181230111013414129
2018-12-30 11:10:16,669 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:10:16,733 [salt.state       :300 ][INFO    ][7838] Made the following changes:
'python-novaclient' changed from 'absent' to '2:11.0.0-2~u16.04+mcp8'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.11.1-2~u16.04+mcp'
'python-openstacksdk' changed from 'absent' to '0.17.2-2~u16.04+mcp'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'python-glanceclient' changed from 'absent' to '1:2.13.0-3~u16.04+mcp3'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.16.1-3~u16.04+mcp8'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-cinderclient' changed from 'absent' to '1:4.0.1-1~u16.04+mcp4'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.9.1-1~u16.04+mcp4'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'

2018-12-30 11:10:16,762 [salt.state       :915 ][INFO    ][7838] Loading fresh modules for state activity
2018-12-30 11:10:16,806 [salt.state       :1951][INFO    ][7838] Completed state [gnocchi-api] at time 11:10:16.806105 duration_in_ms=10410.208
2018-12-30 11:10:16,813 [salt.state       :1780][INFO    ][7838] Running state [gnocchi-metricd] at time 11:10:16.813126
2018-12-30 11:10:16,813 [salt.state       :1813][INFO    ][7838] Executing state pkg.installed for [gnocchi-metricd]
2018-12-30 11:10:18,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:10:18,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-12-30 11:10:21,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:10:21,117 [salt.state       :300 ][INFO    ][7838] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-12-30 11:10:21,147 [salt.state       :915 ][INFO    ][7838] Loading fresh modules for state activity
2018-12-30 11:10:21,380 [salt.state       :1951][INFO    ][7838] Completed state [gnocchi-metricd] at time 11:10:21.380764 duration_in_ms=4567.636
2018-12-30 11:10:21,385 [salt.state       :1780][INFO    ][7838] Running state [python-memcache] at time 11:10:21.385893
2018-12-30 11:10:21,386 [salt.state       :1813][INFO    ][7838] Executing state pkg.installed for [python-memcache]
2018-12-30 11:10:22,216 [salt.state       :300 ][INFO    ][7838] All specified packages are already installed
2018-12-30 11:10:22,217 [salt.state       :1951][INFO    ][7838] Completed state [python-memcache] at time 11:10:22.217223 duration_in_ms=831.328
2018-12-30 11:10:22,218 [salt.state       :1780][INFO    ][7838] Running state [gnocchi-upgrade] at time 11:10:22.218930
2018-12-30 11:10:22,219 [salt.state       :1813][INFO    ][7838] Executing state cmd.run for [gnocchi-upgrade]
2018-12-30 11:10:22,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-12-30 11:10:23,541 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111023544379
2018-12-30 11:10:23,565 [salt.minion      :1432][INFO    ][13900] Starting a new job with PID 13900
2018-12-30 11:10:23,581 [salt.minion      :1711][INFO    ][13900] Returning information for job: 20181230111023544379
2018-12-30 11:10:24,352 [salt.state       :300 ][INFO    ][7838] {'pid': 13881, 'retcode': 0, 'stderr': '2018-12-30 11:10:23,736 [13890] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-12-30 11:10:24,155 [13890] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-12-30 11:10:24,272 [13890] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.33,port=6379,db=0>>>\n2018-12-30 11:10:24,273 [13890] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-12-30 11:10:24,353 [salt.state       :1951][INFO    ][7838] Completed state [gnocchi-upgrade] at time 11:10:24.352903 duration_in_ms=2133.968
2018-12-30 11:10:24,357 [salt.state       :1780][INFO    ][7838] Running state [wsgi_gnocchi] at time 11:10:24.357784
2018-12-30 11:10:24,358 [salt.state       :1813][INFO    ][7838] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-12-30 11:10:24,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-12-30 11:10:24,429 [salt.state       :300 ][INFO    ][7838] {'new': 'wsgi_gnocchi', 'old': None}
2018-12-30 11:10:24,431 [salt.state       :1951][INFO    ][7838] Completed state [wsgi_gnocchi] at time 11:10:24.431185 duration_in_ms=73.399
2018-12-30 11:10:24,435 [salt.state       :1780][INFO    ][7838] Running state [apache2] at time 11:10:24.435236
2018-12-30 11:10:24,435 [salt.state       :1813][INFO    ][7838] Executing state service.running for [apache2]
2018-12-30 11:10:24,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:10:24,460 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:10:24,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-12-30 11:10:25,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:10:25,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:10:25,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:10:25,814 [salt.state       :300 ][INFO    ][7838] {'apache2': True}
2018-12-30 11:10:25,815 [salt.state       :1951][INFO    ][7838] Completed state [apache2] at time 11:10:25.815274 duration_in_ms=1380.037
2018-12-30 11:10:25,816 [salt.state       :1780][INFO    ][7838] Running state [gnocchi-metricd] at time 11:10:25.816272
2018-12-30 11:10:25,825 [salt.state       :1813][INFO    ][7838] Executing state service.running for [gnocchi-metricd]
2018-12-30 11:10:25,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-12-30 11:10:25,857 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:25,882 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:25,914 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:25,960 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:26,016 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:26,048 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:26,098 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:26,778 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7838] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-30 11:10:26,802 [salt.state       :300 ][INFO    ][7838] {'gnocchi-metricd': True}
2018-12-30 11:10:26,802 [salt.state       :1951][INFO    ][7838] Completed state [gnocchi-metricd] at time 11:10:26.802623 duration_in_ms=986.349
2018-12-30 11:10:26,805 [salt.minion      :1711][INFO    ][7838] Returning information for job: 20181230110902543510
2018-12-30 11:10:27,590 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command test.ping with jid 20181230111027597025
2018-12-30 11:10:27,611 [salt.minion      :1432][INFO    ][14148] Starting a new job with PID 14148
2018-12-30 11:10:27,674 [salt.minion      :1711][INFO    ][14148] Returning information for job: 20181230111027597025
2018-12-30 11:11:01,564 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230111101566079
2018-12-30 11:11:01,592 [salt.minion      :1432][INFO    ][14188] Starting a new job with PID 14188
2018-12-30 11:11:07,388 [salt.state       :915 ][INFO    ][14188] Loading fresh modules for state activity
2018-12-30 11:11:07,461 [salt.fileclient  :1219][INFO    ][14188] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-12-30 11:11:07,500 [salt.fileclient  :1219][INFO    ][14188] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-12-30 11:11:08,296 [salt.fileclient  :1219][INFO    ][14188] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-12-30 11:11:08,367 [salt.fileclient  :1219][INFO    ][14188] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2018-12-30 11:11:10,084 [salt.state       :1780][INFO    ][14188] Running state [apache2] at time 11:11:10.084242
2018-12-30 11:11:10,085 [salt.state       :1813][INFO    ][14188] Executing state pkg.installed for [apache2]
2018-12-30 11:11:10,086 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:11:10,464 [salt.state       :300 ][INFO    ][14188] All specified packages are already installed
2018-12-30 11:11:10,466 [salt.state       :1951][INFO    ][14188] Completed state [apache2] at time 11:11:10.466028 duration_in_ms=381.784
2018-12-30 11:11:10,466 [salt.state       :1780][INFO    ][14188] Running state [openssl] at time 11:11:10.466693
2018-12-30 11:11:10,467 [salt.state       :1813][INFO    ][14188] Executing state pkg.installed for [openssl]
2018-12-30 11:11:10,479 [salt.state       :300 ][INFO    ][14188] All specified packages are already installed
2018-12-30 11:11:10,479 [salt.state       :1951][INFO    ][14188] Completed state [openssl] at time 11:11:10.479912 duration_in_ms=13.217
2018-12-30 11:11:10,481 [salt.state       :1780][INFO    ][14188] Running state [a2enmod rewrite] at time 11:11:10.481487
2018-12-30 11:11:10,482 [salt.state       :1813][INFO    ][14188] Executing state cmd.run for [a2enmod rewrite]
2018-12-30 11:11:10,483 [salt.state       :300 ][INFO    ][14188] /etc/apache2/mods-enabled/rewrite.load exists
2018-12-30 11:11:10,483 [salt.state       :1951][INFO    ][14188] Completed state [a2enmod rewrite] at time 11:11:10.483736 duration_in_ms=2.25
2018-12-30 11:11:10,484 [salt.state       :1780][INFO    ][14188] Running state [libapache2-mod-wsgi] at time 11:11:10.484305
2018-12-30 11:11:10,484 [salt.state       :1813][INFO    ][14188] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-12-30 11:11:10,493 [salt.state       :300 ][INFO    ][14188] All specified packages are already installed
2018-12-30 11:11:10,494 [salt.state       :1951][INFO    ][14188] Completed state [libapache2-mod-wsgi] at time 11:11:10.493961 duration_in_ms=9.656
2018-12-30 11:11:10,494 [salt.state       :1780][INFO    ][14188] Running state [a2enmod wsgi] at time 11:11:10.494545
2018-12-30 11:11:10,494 [salt.state       :1813][INFO    ][14188] Executing state cmd.run for [a2enmod wsgi]
2018-12-30 11:11:10,495 [salt.state       :300 ][INFO    ][14188] /etc/apache2/mods-enabled/wsgi.load exists
2018-12-30 11:11:10,496 [salt.state       :1951][INFO    ][14188] Completed state [a2enmod wsgi] at time 11:11:10.496735 duration_in_ms=2.19
2018-12-30 11:11:10,501 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 11:11:10.501234
2018-12-30 11:11:10,501 [salt.state       :1813][INFO    ][14188] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-12-30 11:11:10,777 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-12-30 11:11:10,778 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 11:11:10.778465 duration_in_ms=277.231
2018-12-30 11:11:10,778 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 11:11:10.778939
2018-12-30 11:11:10,779 [salt.state       :1813][INFO    ][14188] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-12-30 11:11:10,780 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-12-30 11:11:10,781 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 11:11:10.781297 duration_in_ms=2.358
2018-12-30 11:11:10,781 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 11:11:10.781688
2018-12-30 11:11:10,782 [salt.state       :1813][INFO    ][14188] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-12-30 11:11:10,782 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-12-30 11:11:10,783 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 11:11:10.782923 duration_in_ms=1.235
2018-12-30 11:11:10,784 [salt.state       :1780][INFO    ][14188] Running state [a2enmod mpm_prefork] at time 11:11:10.784228
2018-12-30 11:11:10,784 [salt.state       :1813][INFO    ][14188] Executing state cmd.run for [a2enmod mpm_prefork]
2018-12-30 11:11:10,785 [salt.state       :300 ][INFO    ][14188] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-12-30 11:11:10,785 [salt.state       :1951][INFO    ][14188] Completed state [a2enmod mpm_prefork] at time 11:11:10.785472 duration_in_ms=1.244
2018-12-30 11:11:10,785 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 11:11:10.785846
2018-12-30 11:11:10,786 [salt.state       :1813][INFO    ][14188] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-12-30 11:11:10,786 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-12-30 11:11:10,787 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 11:11:10.786999 duration_in_ms=1.152
2018-12-30 11:11:10,788 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 11:11:10.788335
2018-12-30 11:11:10,789 [salt.state       :1813][INFO    ][14188] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-12-30 11:11:10,789 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-12-30 11:11:10,790 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 11:11:10.790260 duration_in_ms=1.923
2018-12-30 11:11:10,791 [salt.state       :1780][INFO    ][14188] Running state [apache_server_service_task] at time 11:11:10.791136
2018-12-30 11:11:10,791 [salt.state       :1813][INFO    ][14188] Executing state test.show_notification for [apache_server_service_task]
2018-12-30 11:11:10,791 [salt.state       :300 ][INFO    ][14188] Running apache.server.service
2018-12-30 11:11:10,792 [salt.state       :1951][INFO    ][14188] Completed state [apache_server_service_task] at time 11:11:10.792274 duration_in_ms=1.138
2018-12-30 11:11:10,792 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/ports.conf] at time 11:11:10.792833
2018-12-30 11:11:10,793 [salt.state       :1813][INFO    ][14188] Executing state file.managed for [/etc/apache2/ports.conf]
2018-12-30 11:11:10,885 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/ports.conf is in the correct state
2018-12-30 11:11:10,885 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/ports.conf] at time 11:11:10.885275 duration_in_ms=92.442
2018-12-30 11:11:10,885 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/conf-available/security.conf] at time 11:11:10.885698
2018-12-30 11:11:10,886 [salt.state       :1813][INFO    ][14188] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-12-30 11:11:10,972 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/conf-available/security.conf is in the correct state
2018-12-30 11:11:10,973 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/conf-available/security.conf] at time 11:11:10.973140 duration_in_ms=87.441
2018-12-30 11:11:10,979 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 11:11:10.979861
2018-12-30 11:11:10,980 [salt.state       :1813][INFO    ][14188] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-12-30 11:11:10,980 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-12-30 11:11:10,981 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 11:11:10.981230 duration_in_ms=1.369
2018-12-30 11:11:10,981 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 11:11:10.981821
2018-12-30 11:11:10,983 [salt.state       :1813][INFO    ][14188] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-12-30 11:11:11,267 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-12-30 11:11:11,267 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 11:11:11.267549 duration_in_ms=285.726
2018-12-30 11:11:11,268 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 11:11:11.268170
2018-12-30 11:11:11,268 [salt.state       :1813][INFO    ][14188] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-12-30 11:11:11,545 [salt.state       :300 ][INFO    ][14188] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-12-30 11:11:11,546 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 11:11:11.546357 duration_in_ms=278.187
2018-12-30 11:11:11,549 [salt.state       :1780][INFO    ][14188] Running state [apache2] at time 11:11:11.549545
2018-12-30 11:11:11,549 [salt.state       :1813][INFO    ][14188] Executing state service.running for [apache2]
2018-12-30 11:11:11,550 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-12-30 11:11:11,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:11:11,609 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111111607915
2018-12-30 11:11:11,623 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:11:11,628 [salt.minion      :1432][INFO    ][14242] Starting a new job with PID 14242
2018-12-30 11:11:11,643 [salt.state       :300 ][INFO    ][14188] The service apache2 is already running
2018-12-30 11:11:11,644 [salt.state       :1951][INFO    ][14188] Completed state [apache2] at time 11:11:11.643645 duration_in_ms=94.098
2018-12-30 11:11:11,645 [salt.state       :1780][INFO    ][14188] Running state [/etc/apache2/conf-enabled/security.conf] at time 11:11:11.645436
2018-12-30 11:11:11,645 [salt.state       :1813][INFO    ][14188] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-12-30 11:11:11,648 [salt.minion      :1711][INFO    ][14242] Returning information for job: 20181230111111607915
2018-12-30 11:11:11,649 [salt.state       :300 ][INFO    ][14188] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-12-30 11:11:11,650 [salt.state       :1951][INFO    ][14188] Completed state [/etc/apache2/conf-enabled/security.conf] at time 11:11:11.649784 duration_in_ms=4.348
2018-12-30 11:11:11,651 [salt.state       :1780][INFO    ][14188] Running state [panko-api] at time 11:11:11.651414
2018-12-30 11:11:11,652 [salt.state       :1813][INFO    ][14188] Executing state pkg.installed for [panko-api]
2018-12-30 11:11:11,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-12-30 11:11:11,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 11:11:13,838 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:11:13,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-12-30 11:11:20,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:11:20,838 [salt.state       :300 ][INFO    ][14188] Made the following changes:
'python3-dateutil' changed from 'absent' to '2.6.1-1~u16.04+mcp1'
'python-pankoclient' changed from 'absent' to '0.5.0-2~u16.04+mcp5'
'python3-editor' changed from 'absent' to '0.4-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'python-panko' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'libmatheval1' changed from 'absent' to '1.1.11+dfsg-2'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'panko-common' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python3-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'uwsgi-core' changed from 'absent' to '2.0.12-5ubuntu3.2'
'panko-api' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-oslo.reports' changed from 'absent' to '1.26.0-2~u16.04+mcp'
'python3-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python3-mako' changed from 'absent' to '1.0.3+ds1-1ubuntu1'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'uwsgi-plugin-python' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libjansson4' changed from 'absent' to '2.7-3ubuntu0.1'
'alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'q-text-as-data' changed from 'absent' to '1'

2018-12-30 11:11:20,877 [salt.state       :915 ][INFO    ][14188] Loading fresh modules for state activity
2018-12-30 11:11:20,924 [salt.state       :1951][INFO    ][14188] Completed state [panko-api] at time 11:11:20.924813 duration_in_ms=9273.399
2018-12-30 11:11:20,929 [salt.state       :1780][INFO    ][14188] Running state [panko_ssl_mysql] at time 11:11:20.929938
2018-12-30 11:11:20,930 [salt.state       :1813][INFO    ][14188] Executing state test.show_notification for [panko_ssl_mysql]
2018-12-30 11:11:20,931 [salt.state       :300 ][INFO    ][14188] Running panko._ssl.mysql
2018-12-30 11:11:20,931 [salt.state       :1951][INFO    ][14188] Completed state [panko_ssl_mysql] at time 11:11:20.931831 duration_in_ms=1.893
2018-12-30 11:11:20,935 [salt.state       :1780][INFO    ][14188] Running state [/etc/panko/panko.conf] at time 11:11:20.935945
2018-12-30 11:11:20,937 [salt.state       :1813][INFO    ][14188] Executing state file.managed for [/etc/panko/panko.conf]
2018-12-30 11:11:20,963 [salt.fileclient  :1219][INFO    ][14188] Fetching file from saltenv 'base', ** done ** 'panko/files/rocky/panko.conf.Debian'
2018-12-30 11:11:21,027 [salt.fileclient  :1219][INFO    ][14188] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-12-30 11:11:21,054 [salt.fileclient  :1219][INFO    ][14188] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-12-30 11:11:21,145 [salt.state       :300 ][INFO    ][14188] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,73 +159,77 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -248,50 +239,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -306,6 +311,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -321,6 +327,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -358,6 +365,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -371,36 +379,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -478,68 +456,115 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-12-30 11:11:21,154 [salt.state       :1951][INFO    ][14188] Completed state [/etc/panko/panko.conf] at time 11:11:21.154522 duration_in_ms=218.577
2018-12-30 11:11:21,155 [salt.state       :1780][INFO    ][14188] Running state [panko-dbsync] at time 11:11:21.155168
2018-12-30 11:11:21,155 [salt.state       :1813][INFO    ][14188] Executing state cmd.run for [panko-dbsync]
2018-12-30 11:11:21,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command '/bin/false' in directory '/root'
2018-12-30 11:11:21,175 [salt.state       :300 ][INFO    ][14188] onlyif execution failed
2018-12-30 11:11:21,175 [salt.state       :1951][INFO    ][14188] Completed state [panko-dbsync] at time 11:11:21.175380 duration_in_ms=20.211
2018-12-30 11:11:21,182 [salt.state       :1780][INFO    ][14188] Running state [wsgi_panko] at time 11:11:21.182964
2018-12-30 11:11:21,183 [salt.state       :1813][INFO    ][14188] Executing state apache_site.enabled for [wsgi_panko]
2018-12-30 11:11:21,183 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-12-30 11:11:21,236 [salt.state       :300 ][INFO    ][14188] {'new': 'wsgi_panko', 'old': None}
2018-12-30 11:11:21,236 [salt.state       :1951][INFO    ][14188] Completed state [wsgi_panko] at time 11:11:21.236761 duration_in_ms=53.795
2018-12-30 11:11:21,730 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111121737702
2018-12-30 11:11:21,748 [salt.minion      :1432][INFO    ][15168] Starting a new job with PID 15168
2018-12-30 11:11:21,764 [salt.minion      :1711][INFO    ][15168] Returning information for job: 20181230111121737702
2018-12-30 11:11:21,907 [salt.state       :1780][INFO    ][14188] Running state [apache2] at time 11:11:21.907887
2018-12-30 11:11:21,908 [salt.state       :1813][INFO    ][14188] Executing state service.running for [apache2]
2018-12-30 11:11:21,909 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:11:21,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:11:21,957 [salt.state       :300 ][INFO    ][14188] The service apache2 is already running
2018-12-30 11:11:21,959 [salt.state       :1951][INFO    ][14188] Completed state [apache2] at time 11:11:21.959114 duration_in_ms=51.223
2018-12-30 11:11:21,960 [salt.state       :1780][INFO    ][14188] Running state [apache2] at time 11:11:21.959973
2018-12-30 11:11:21,960 [salt.state       :1813][INFO    ][14188] Executing state service.mod_watch for [apache2]
2018-12-30 11:11:21,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:11:21,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14188] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-12-30 11:11:24,321 [salt.state       :300 ][INFO    ][14188] {'apache2': True}
2018-12-30 11:11:24,325 [salt.state       :1951][INFO    ][14188] Completed state [apache2] at time 11:11:24.325073 duration_in_ms=2365.099
2018-12-30 11:11:24,331 [salt.minion      :1711][INFO    ][14188] Returning information for job: 20181230111101566079
2018-12-30 11:11:25,063 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command test.ping with jid 20181230111125065888
2018-12-30 11:11:25,084 [salt.minion      :1432][INFO    ][15295] Starting a new job with PID 15295
2018-12-30 11:11:25,131 [salt.minion      :1711][INFO    ][15295] Returning information for job: 20181230111125065888
2018-12-30 11:13:53,514 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230111353522541
2018-12-30 11:13:53,537 [salt.minion      :1432][INFO    ][15319] Starting a new job with PID 15319
2018-12-30 11:13:59,284 [salt.state       :915 ][INFO    ][15319] Loading fresh modules for state activity
2018-12-30 11:13:59,350 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-12-30 11:13:59,391 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-12-30 11:13:59,587 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2018-12-30 11:13:59,660 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-12-30 11:13:59,744 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-12-30 11:14:02,186 [salt.state       :1780][INFO    ][15319] Running state [aodh-api] at time 11:14:02.186263
2018-12-30 11:14:02,187 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [aodh-api]
2018-12-30 11:14:02,188 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:14:02,615 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-12-30 11:14:02,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 11:14:03,603 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111403609621
2018-12-30 11:14:03,624 [salt.minion      :1432][INFO    ][15635] Starting a new job with PID 15635
2018-12-30 11:14:03,640 [salt.minion      :1711][INFO    ][15635] Returning information for job: 20181230111403609621
2018-12-30 11:14:04,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:14:05,006 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-12-30 11:14:13,714 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111413721686
2018-12-30 11:14:13,732 [salt.minion      :1432][INFO    ][16090] Starting a new job with PID 16090
2018-12-30 11:14:13,755 [salt.minion      :1711][INFO    ][16090] Returning information for job: 20181230111413721686
2018-12-30 11:14:23,839 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111423844450
2018-12-30 11:14:23,865 [salt.minion      :1432][INFO    ][21112] Starting a new job with PID 21112
2018-12-30 11:14:23,915 [salt.minion      :1711][INFO    ][21112] Returning information for job: 20181230111423844450
2018-12-30 11:14:25,316 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:14:25,423 [salt.state       :300 ][INFO    ][15319] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'build-essential' changed from 'absent' to '12.1ubuntu2'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'aodh-common' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'make:any' changed from 'absent' to '1'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'python2.7-greenlet' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-aodh' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-141.167'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-oslo.messaging' changed from 'absent' to '8.1.0-1~u16.04+mcp1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'c++-compiler' changed from 'absent' to '1'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'libc-dev' changed from 'absent' to '1'
'python-oslo.service' changed from 'absent' to '1.31.6-1~u16.04+mcp3'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'linux-kernel-headers' changed from 'absent' to '1'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-12-30 11:14:25,511 [salt.state       :915 ][INFO    ][15319] Loading fresh modules for state activity
2018-12-30 11:14:25,834 [salt.state       :1951][INFO    ][15319] Completed state [aodh-api] at time 11:14:25.834393 duration_in_ms=23648.13
2018-12-30 11:14:25,849 [salt.state       :1780][INFO    ][15319] Running state [aodh-evaluator] at time 11:14:25.849833
2018-12-30 11:14:25,850 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [aodh-evaluator]
2018-12-30 11:14:27,520 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:14:27,586 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-12-30 11:14:32,368 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:14:32,439 [salt.state       :300 ][INFO    ][15319] Made the following changes:
'aodh-evaluator' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2018-12-30 11:14:32,487 [salt.state       :915 ][INFO    ][15319] Loading fresh modules for state activity
2018-12-30 11:14:32,564 [salt.state       :1951][INFO    ][15319] Completed state [aodh-evaluator] at time 11:14:32.564597 duration_in_ms=6714.764
2018-12-30 11:14:32,571 [salt.state       :1780][INFO    ][15319] Running state [aodh-notifier] at time 11:14:32.571431
2018-12-30 11:14:32,571 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [aodh-notifier]
2018-12-30 11:14:34,323 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111434019760
2018-12-30 11:14:34,350 [salt.minion      :1432][INFO    ][21581] Starting a new job with PID 21581
2018-12-30 11:14:34,369 [salt.minion      :1711][INFO    ][21581] Returning information for job: 20181230111434019760
2018-12-30 11:14:34,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:14:34,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-12-30 11:14:37,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:14:37,928 [salt.state       :300 ][INFO    ][15319] Made the following changes:
'aodh-notifier' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2018-12-30 11:14:37,964 [salt.state       :915 ][INFO    ][15319] Loading fresh modules for state activity
2018-12-30 11:14:38,016 [salt.state       :1951][INFO    ][15319] Completed state [aodh-notifier] at time 11:14:38.016697 duration_in_ms=5445.265
2018-12-30 11:14:38,023 [salt.state       :1780][INFO    ][15319] Running state [aodh-listener] at time 11:14:38.022989
2018-12-30 11:14:38,027 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [aodh-listener]
2018-12-30 11:14:39,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:14:39,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-12-30 11:14:42,614 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:14:42,679 [salt.state       :300 ][INFO    ][15319] Made the following changes:
'aodh-listener' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2018-12-30 11:14:42,717 [salt.state       :915 ][INFO    ][15319] Loading fresh modules for state activity
2018-12-30 11:14:42,761 [salt.state       :1951][INFO    ][15319] Completed state [aodh-listener] at time 11:14:42.761427 duration_in_ms=4738.437
2018-12-30 11:14:42,768 [salt.state       :1780][INFO    ][15319] Running state [python-aodhclient] at time 11:14:42.768918
2018-12-30 11:14:42,769 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [python-aodhclient]
2018-12-30 11:14:44,033 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111444035779
2018-12-30 11:14:44,052 [salt.minion      :1432][INFO    ][22167] Starting a new job with PID 22167
2018-12-30 11:14:44,074 [salt.minion      :1711][INFO    ][22167] Returning information for job: 20181230111444035779
2018-12-30 11:14:44,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:14:44,137 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-12-30 11:14:46,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:14:46,289 [salt.state       :300 ][INFO    ][15319] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp3'

2018-12-30 11:14:46,328 [salt.state       :915 ][INFO    ][15319] Loading fresh modules for state activity
2018-12-30 11:14:46,379 [salt.state       :1951][INFO    ][15319] Completed state [python-aodhclient] at time 11:14:46.379650 duration_in_ms=3610.731
2018-12-30 11:14:46,385 [salt.state       :1780][INFO    ][15319] Running state [aodh_ssl_mysql] at time 11:14:46.385952
2018-12-30 11:14:46,386 [salt.state       :1813][INFO    ][15319] Executing state test.show_notification for [aodh_ssl_mysql]
2018-12-30 11:14:46,386 [salt.state       :300 ][INFO    ][15319] Running aodh._ssl.mysql
2018-12-30 11:14:46,387 [salt.state       :1951][INFO    ][15319] Completed state [aodh_ssl_mysql] at time 11:14:46.387323 duration_in_ms=1.371
2018-12-30 11:14:46,387 [salt.state       :1780][INFO    ][15319] Running state [aodh_ssl_rabbitmq] at time 11:14:46.387912
2018-12-30 11:14:46,388 [salt.state       :1813][INFO    ][15319] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-12-30 11:14:46,388 [salt.state       :300 ][INFO    ][15319] Running aodh._ssl.rabbitmq
2018-12-30 11:14:46,389 [salt.state       :1951][INFO    ][15319] Completed state [aodh_ssl_rabbitmq] at time 11:14:46.389181 duration_in_ms=1.269
2018-12-30 11:14:46,392 [salt.state       :1780][INFO    ][15319] Running state [/etc/aodh/aodh.conf] at time 11:14:46.391969
2018-12-30 11:14:46,392 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-12-30 11:14:46,430 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/aodh.conf.Debian'
2018-12-30 11:14:46,521 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-12-30 11:14:46,657 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-12-30 11:14:46,681 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-12-30 11:14:46,725 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-12-30 11:14:46,771 [salt.state       :300 ][INFO    ][15319] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.33
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-rFNLA3/aodh-7.0.0/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,71 +441,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -532,32 +519,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -571,36 +565,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -615,6 +1123,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -630,6 +1139,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -667,6 +1177,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -680,36 +1191,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -787,862 +1268,112 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-12-30 11:14:46,780 [salt.state       :1951][INFO    ][15319] Completed state [/etc/aodh/aodh.conf] at time 11:14:46.780591 duration_in_ms=388.621
2018-12-30 11:14:46,781 [salt.state       :1780][INFO    ][15319] Running state [aodh-dbsync] at time 11:14:46.781725
2018-12-30 11:14:46,781 [salt.state       :1813][INFO    ][15319] Executing state cmd.run for [aodh-dbsync]
2018-12-30 11:14:46,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command '/bin/false' in directory '/root'
2018-12-30 11:14:46,833 [salt.state       :300 ][INFO    ][15319] onlyif execution failed
2018-12-30 11:14:46,835 [salt.state       :1951][INFO    ][15319] Completed state [aodh-dbsync] at time 11:14:46.834693 duration_in_ms=52.966
2018-12-30 11:14:46,862 [salt.state       :1780][INFO    ][15319] Running state [apache2] at time 11:14:46.862658
2018-12-30 11:14:46,862 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [apache2]
2018-12-30 11:14:47,970 [salt.state       :300 ][INFO    ][15319] All specified packages are already installed
2018-12-30 11:14:47,970 [salt.state       :1951][INFO    ][15319] Completed state [apache2] at time 11:14:47.970785 duration_in_ms=1108.127
2018-12-30 11:14:47,971 [salt.state       :1780][INFO    ][15319] Running state [openssl] at time 11:14:47.971168
2018-12-30 11:14:47,971 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [openssl]
2018-12-30 11:14:47,987 [salt.state       :300 ][INFO    ][15319] All specified packages are already installed
2018-12-30 11:14:47,987 [salt.state       :1951][INFO    ][15319] Completed state [openssl] at time 11:14:47.987824 duration_in_ms=16.656
2018-12-30 11:14:47,988 [salt.state       :1780][INFO    ][15319] Running state [a2enmod rewrite] at time 11:14:47.988924
2018-12-30 11:14:47,989 [salt.state       :1813][INFO    ][15319] Executing state cmd.run for [a2enmod rewrite]
2018-12-30 11:14:47,990 [salt.state       :300 ][INFO    ][15319] /etc/apache2/mods-enabled/rewrite.load exists
2018-12-30 11:14:47,990 [salt.state       :1951][INFO    ][15319] Completed state [a2enmod rewrite] at time 11:14:47.990827 duration_in_ms=1.903
2018-12-30 11:14:47,991 [salt.state       :1780][INFO    ][15319] Running state [libapache2-mod-wsgi] at time 11:14:47.991444
2018-12-30 11:14:47,991 [salt.state       :1813][INFO    ][15319] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-12-30 11:14:48,005 [salt.state       :300 ][INFO    ][15319] All specified packages are already installed
2018-12-30 11:14:48,006 [salt.state       :1951][INFO    ][15319] Completed state [libapache2-mod-wsgi] at time 11:14:48.006136 duration_in_ms=14.693
2018-12-30 11:14:48,006 [salt.state       :1780][INFO    ][15319] Running state [a2enmod wsgi] at time 11:14:48.006655
2018-12-30 11:14:48,006 [salt.state       :1813][INFO    ][15319] Executing state cmd.run for [a2enmod wsgi]
2018-12-30 11:14:48,007 [salt.state       :300 ][INFO    ][15319] /etc/apache2/mods-enabled/wsgi.load exists
2018-12-30 11:14:48,007 [salt.state       :1951][INFO    ][15319] Completed state [a2enmod wsgi] at time 11:14:48.007587 duration_in_ms=0.931
2018-12-30 11:14:48,009 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 11:14:48.009919
2018-12-30 11:14:48,010 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-12-30 11:14:48,095 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-12-30 11:14:48,096 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 11:14:48.096337 duration_in_ms=86.418
2018-12-30 11:14:48,097 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 11:14:48.096997
2018-12-30 11:14:48,097 [salt.state       :1813][INFO    ][15319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-12-30 11:14:48,097 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-12-30 11:14:48,097 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 11:14:48.097927 duration_in_ms=0.93
2018-12-30 11:14:48,098 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 11:14:48.098193
2018-12-30 11:14:48,098 [salt.state       :1813][INFO    ][15319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-12-30 11:14:48,098 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-12-30 11:14:48,099 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 11:14:48.099370 duration_in_ms=1.177
2018-12-30 11:14:48,100 [salt.state       :1780][INFO    ][15319] Running state [a2enmod mpm_prefork] at time 11:14:48.100281
2018-12-30 11:14:48,100 [salt.state       :1813][INFO    ][15319] Executing state cmd.run for [a2enmod mpm_prefork]
2018-12-30 11:14:48,100 [salt.state       :300 ][INFO    ][15319] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-12-30 11:14:48,101 [salt.state       :1951][INFO    ][15319] Completed state [a2enmod mpm_prefork] at time 11:14:48.101175 duration_in_ms=0.894
2018-12-30 11:14:48,101 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 11:14:48.101446
2018-12-30 11:14:48,101 [salt.state       :1813][INFO    ][15319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-12-30 11:14:48,102 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-12-30 11:14:48,102 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 11:14:48.102732 duration_in_ms=1.286
2018-12-30 11:14:48,103 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 11:14:48.103388
2018-12-30 11:14:48,103 [salt.state       :1813][INFO    ][15319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-12-30 11:14:48,104 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-12-30 11:14:48,104 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 11:14:48.104283 duration_in_ms=0.895
2018-12-30 11:14:48,104 [salt.state       :1780][INFO    ][15319] Running state [apache_server_service_task] at time 11:14:48.104563
2018-12-30 11:14:48,104 [salt.state       :1813][INFO    ][15319] Executing state test.show_notification for [apache_server_service_task]
2018-12-30 11:14:48,105 [salt.state       :300 ][INFO    ][15319] Running apache.server.service
2018-12-30 11:14:48,105 [salt.state       :1951][INFO    ][15319] Completed state [apache_server_service_task] at time 11:14:48.105388 duration_in_ms=0.825
2018-12-30 11:14:48,105 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/ports.conf] at time 11:14:48.105877
2018-12-30 11:14:48,106 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/apache2/ports.conf]
2018-12-30 11:14:48,189 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/ports.conf is in the correct state
2018-12-30 11:14:48,189 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/ports.conf] at time 11:14:48.189539 duration_in_ms=83.662
2018-12-30 11:14:48,190 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/conf-available/security.conf] at time 11:14:48.190052
2018-12-30 11:14:48,190 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-12-30 11:14:48,277 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/conf-available/security.conf is in the correct state
2018-12-30 11:14:48,277 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/conf-available/security.conf] at time 11:14:48.277856 duration_in_ms=87.802
2018-12-30 11:14:48,286 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 11:14:48.286433
2018-12-30 11:14:48,286 [salt.state       :1813][INFO    ][15319] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-12-30 11:14:48,287 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-12-30 11:14:48,287 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 11:14:48.287319 duration_in_ms=0.886
2018-12-30 11:14:48,288 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 11:14:48.288209
2018-12-30 11:14:48,288 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-12-30 11:14:48,564 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-12-30 11:14:48,565 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 11:14:48.565242 duration_in_ms=277.033
2018-12-30 11:14:48,565 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 11:14:48.565780
2018-12-30 11:14:48,566 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-12-30 11:14:48,862 [salt.state       :300 ][INFO    ][15319] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-12-30 11:14:48,862 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 11:14:48.862442 duration_in_ms=296.66
2018-12-30 11:14:48,865 [salt.state       :1780][INFO    ][15319] Running state [apache2] at time 11:14:48.865500
2018-12-30 11:14:48,865 [salt.state       :1813][INFO    ][15319] Executing state service.running for [apache2]
2018-12-30 11:14:48,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-12-30 11:14:48,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:14:48,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:14:48,951 [salt.state       :300 ][INFO    ][15319] The service apache2 is already running
2018-12-30 11:14:48,952 [salt.state       :1951][INFO    ][15319] Completed state [apache2] at time 11:14:48.951986 duration_in_ms=86.482
2018-12-30 11:14:48,954 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/conf-enabled/security.conf] at time 11:14:48.954244
2018-12-30 11:14:48,954 [salt.state       :1813][INFO    ][15319] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-12-30 11:14:48,960 [salt.state       :300 ][INFO    ][15319] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-12-30 11:14:48,960 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/conf-enabled/security.conf] at time 11:14:48.960791 duration_in_ms=6.546
2018-12-30 11:14:48,961 [salt.state       :1780][INFO    ][15319] Running state [/etc/default/aodh-evaluator] at time 11:14:48.961682
2018-12-30 11:14:48,962 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-12-30 11:14:48,990 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-12-30 11:14:49,009 [salt.state       :300 ][INFO    ][15319] File changed:
New file
2018-12-30 11:14:49,009 [salt.state       :1951][INFO    ][15319] Completed state [/etc/default/aodh-evaluator] at time 11:14:49.009598 duration_in_ms=47.916
2018-12-30 11:14:49,010 [salt.state       :1780][INFO    ][15319] Running state [/etc/default/aodh-notifier] at time 11:14:49.010137
2018-12-30 11:14:49,010 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/default/aodh-notifier]
2018-12-30 11:14:49,039 [salt.state       :300 ][INFO    ][15319] File changed:
New file
2018-12-30 11:14:49,039 [salt.state       :1951][INFO    ][15319] Completed state [/etc/default/aodh-notifier] at time 11:14:49.039748 duration_in_ms=29.611
2018-12-30 11:14:49,040 [salt.state       :1780][INFO    ][15319] Running state [/etc/default/aodh-listener] at time 11:14:49.040330
2018-12-30 11:14:49,040 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/default/aodh-listener]
2018-12-30 11:14:49,067 [salt.state       :300 ][INFO    ][15319] File changed:
New file
2018-12-30 11:14:49,068 [salt.state       :1951][INFO    ][15319] Completed state [/etc/default/aodh-listener] at time 11:14:49.068252 duration_in_ms=27.921
2018-12-30 11:14:49,069 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 11:14:49.069145
2018-12-30 11:14:49,069 [salt.state       :1813][INFO    ][15319] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-12-30 11:14:49,094 [salt.fileclient  :1219][INFO    ][15319] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/apache-aodh.apache2.conf.Debian'
2018-12-30 11:14:49,143 [salt.state       :300 ][INFO    ][15319] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.33:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-12-30 11:14:49,145 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 11:14:49.145694 duration_in_ms=76.548
2018-12-30 11:14:49,146 [salt.state       :1780][INFO    ][15319] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 11:14:49.146003
2018-12-30 11:14:49,146 [salt.state       :1813][INFO    ][15319] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-12-30 11:14:49,147 [salt.state       :300 ][INFO    ][15319] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-12-30 11:14:49,148 [salt.state       :1951][INFO    ][15319] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 11:14:49.148211 duration_in_ms=2.208
2018-12-30 11:14:49,149 [salt.state       :1780][INFO    ][15319] Running state [apache2] at time 11:14:49.149274
2018-12-30 11:14:49,149 [salt.state       :1813][INFO    ][15319] Executing state service.running for [apache2]
2018-12-30 11:14:49,150 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:14:49,177 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-30 11:14:49,203 [salt.state       :300 ][INFO    ][15319] The service apache2 is already running
2018-12-30 11:14:49,203 [salt.state       :1951][INFO    ][15319] Completed state [apache2] at time 11:14:49.203828 duration_in_ms=54.552
2018-12-30 11:14:49,204 [salt.state       :1780][INFO    ][15319] Running state [apache2] at time 11:14:49.204569
2018-12-30 11:14:49,205 [salt.state       :1813][INFO    ][15319] Executing state service.mod_watch for [apache2]
2018-12-30 11:14:49,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-30 11:14:49,235 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-12-30 11:14:51,619 [salt.state       :300 ][INFO    ][15319] {'apache2': True}
2018-12-30 11:14:51,620 [salt.state       :1951][INFO    ][15319] Completed state [apache2] at time 11:14:51.619744 duration_in_ms=2415.174
2018-12-30 11:14:51,623 [salt.state       :1780][INFO    ][15319] Running state [aodh-evaluator] at time 11:14:51.623706
2018-12-30 11:14:51,624 [salt.state       :1813][INFO    ][15319] Executing state service.running for [aodh-evaluator]
2018-12-30 11:14:51,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-12-30 11:14:51,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-12-30 11:14:51,675 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-12-30 11:14:51,703 [salt.state       :300 ][INFO    ][15319] The service aodh-evaluator is already running
2018-12-30 11:14:51,704 [salt.state       :1951][INFO    ][15319] Completed state [aodh-evaluator] at time 11:14:51.704113 duration_in_ms=80.404
2018-12-30 11:14:51,704 [salt.state       :1780][INFO    ][15319] Running state [aodh-evaluator] at time 11:14:51.704563
2018-12-30 11:14:51,705 [salt.state       :1813][INFO    ][15319] Executing state service.mod_watch for [aodh-evaluator]
2018-12-30 11:14:51,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-12-30 11:14:51,727 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-12-30 11:14:51,932 [salt.state       :300 ][INFO    ][15319] {'aodh-evaluator': True}
2018-12-30 11:14:51,933 [salt.state       :1951][INFO    ][15319] Completed state [aodh-evaluator] at time 11:14:51.932969 duration_in_ms=228.403
2018-12-30 11:14:51,935 [salt.state       :1780][INFO    ][15319] Running state [aodh-notifier] at time 11:14:51.935191
2018-12-30 11:14:51,935 [salt.state       :1813][INFO    ][15319] Executing state service.running for [aodh-notifier]
2018-12-30 11:14:51,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-12-30 11:14:51,985 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-12-30 11:14:52,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-12-30 11:14:52,055 [salt.state       :300 ][INFO    ][15319] The service aodh-notifier is already running
2018-12-30 11:14:52,055 [salt.state       :1951][INFO    ][15319] Completed state [aodh-notifier] at time 11:14:52.055484 duration_in_ms=120.29
2018-12-30 11:14:52,055 [salt.state       :1780][INFO    ][15319] Running state [aodh-notifier] at time 11:14:52.055752
2018-12-30 11:14:52,056 [salt.state       :1813][INFO    ][15319] Executing state service.mod_watch for [aodh-notifier]
2018-12-30 11:14:52,057 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-12-30 11:14:52,085 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-12-30 11:14:54,171 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111454177564
2018-12-30 11:14:54,196 [salt.minion      :1432][INFO    ][22550] Starting a new job with PID 22550
2018-12-30 11:14:54,222 [salt.minion      :1711][INFO    ][22550] Returning information for job: 20181230111454177564
2018-12-30 11:15:04,338 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111504341882
2018-12-30 11:15:04,370 [salt.minion      :1432][INFO    ][22584] Starting a new job with PID 22584
2018-12-30 11:15:04,390 [salt.minion      :1711][INFO    ][22584] Returning information for job: 20181230111504341882
2018-12-30 11:15:07,146 [salt.state       :300 ][INFO    ][15319] {'aodh-notifier': True}
2018-12-30 11:15:07,146 [salt.state       :1951][INFO    ][15319] Completed state [aodh-notifier] at time 11:15:07.146503 duration_in_ms=15090.749
2018-12-30 11:15:07,151 [salt.state       :1780][INFO    ][15319] Running state [aodh-listener] at time 11:15:07.151114
2018-12-30 11:15:07,151 [salt.state       :1813][INFO    ][15319] Executing state service.running for [aodh-listener]
2018-12-30 11:15:07,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-12-30 11:15:07,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-12-30 11:15:07,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-12-30 11:15:07,229 [salt.state       :300 ][INFO    ][15319] The service aodh-listener is already running
2018-12-30 11:15:07,229 [salt.state       :1951][INFO    ][15319] Completed state [aodh-listener] at time 11:15:07.229360 duration_in_ms=78.243
2018-12-30 11:15:07,229 [salt.state       :1780][INFO    ][15319] Running state [aodh-listener] at time 11:15:07.229646
2018-12-30 11:15:07,230 [salt.state       :1813][INFO    ][15319] Executing state service.mod_watch for [aodh-listener]
2018-12-30 11:15:07,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-12-30 11:15:07,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-12-30 11:15:14,478 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111514482171
2018-12-30 11:15:14,497 [salt.minion      :1432][INFO    ][22639] Starting a new job with PID 22639
2018-12-30 11:15:14,515 [salt.minion      :1711][INFO    ][22639] Returning information for job: 20181230111514482171
2018-12-30 11:15:22,399 [salt.state       :300 ][INFO    ][15319] {'aodh-listener': True}
2018-12-30 11:15:22,399 [salt.state       :1951][INFO    ][15319] Completed state [aodh-listener] at time 11:15:22.399872 duration_in_ms=15170.223
2018-12-30 11:15:22,408 [salt.minion      :1711][INFO    ][15319] Returning information for job: 20181230111353522541
2018-12-30 11:15:23,153 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command state.sls with jid 20181230111523160386
2018-12-30 11:15:23,166 [salt.minion      :1432][INFO    ][22685] Starting a new job with PID 22685
2018-12-30 11:15:29,040 [salt.state       :915 ][INFO    ][22685] Loading fresh modules for state activity
2018-12-30 11:15:29,107 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-12-30 11:15:29,143 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-12-30 11:15:29,374 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2018-12-30 11:15:31,617 [salt.state       :1780][INFO    ][22685] Running state [ceilometer-agent-central] at time 11:15:31.617469
2018-12-30 11:15:31,619 [salt.state       :1813][INFO    ][22685] Executing state pkg.installed for [ceilometer-agent-central]
2018-12-30 11:15:31,620 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:15:32,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-12-30 11:15:32,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-30 11:15:33,245 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111533248395
2018-12-30 11:15:33,268 [salt.minion      :1432][INFO    ][23005] Starting a new job with PID 23005
2018-12-30 11:15:33,284 [salt.minion      :1711][INFO    ][23005] Returning information for job: 20181230111533248395
2018-12-30 11:15:34,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:15:34,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-12-30 11:15:43,422 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111543429233
2018-12-30 11:15:43,443 [salt.minion      :1432][INFO    ][23563] Starting a new job with PID 23563
2018-12-30 11:15:43,465 [salt.minion      :1711][INFO    ][23563] Returning information for job: 20181230111543429233
2018-12-30 11:15:53,627 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111553629521
2018-12-30 11:15:53,644 [salt.minion      :1432][INFO    ][25015] Starting a new job with PID 25015
2018-12-30 11:15:53,709 [salt.minion      :1711][INFO    ][25015] Returning information for job: 20181230111553629521
2018-12-30 11:15:59,541 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:15:59,621 [salt.state       :300 ][INFO    ][22685] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'python-ply-yacc-3.5' changed from 'absent' to '1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-ply' changed from 'absent' to '3.7-1'
'python-pysmi' changed from 'absent' to '0.2.2-2~u16.04+mcp'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.4.3-1~u16.04+mcp'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-ply-lex-3.5' changed from 'absent' to '1'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-oslo-rootwrap' changed from 'absent' to '1'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-pycryptodome' changed from 'absent' to '3.4.7-1.1~u16.04+mcp'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'python2.7-ply' changed from 'absent' to '1'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-12-30 11:15:59,662 [salt.state       :915 ][INFO    ][22685] Loading fresh modules for state activity
2018-12-30 11:15:59,919 [salt.state       :1951][INFO    ][22685] Completed state [ceilometer-agent-central] at time 11:15:59.919327 duration_in_ms=28301.858
2018-12-30 11:15:59,928 [salt.state       :1780][INFO    ][22685] Running state [python-ceilometerclient] at time 11:15:59.928559
2018-12-30 11:15:59,928 [salt.state       :1813][INFO    ][22685] Executing state pkg.installed for [python-ceilometerclient]
2018-12-30 11:16:00,848 [salt.state       :300 ][INFO    ][22685] All specified packages are already installed
2018-12-30 11:16:00,849 [salt.state       :1951][INFO    ][22685] Completed state [python-ceilometerclient] at time 11:16:00.849631 duration_in_ms=921.071
2018-12-30 11:16:00,850 [salt.state       :1780][INFO    ][22685] Running state [ceilometer-agent-notification] at time 11:16:00.849979
2018-12-30 11:16:00,850 [salt.state       :1813][INFO    ][22685] Executing state pkg.installed for [ceilometer-agent-notification]
2018-12-30 11:16:00,879 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-30 11:16:00,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-12-30 11:16:03,768 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command saltutil.find_job with jid 20181230111603768040
2018-12-30 11:16:03,811 [salt.minion      :1432][INFO    ][25506] Starting a new job with PID 25506
2018-12-30 11:16:03,872 [salt.minion      :1711][INFO    ][25506] Returning information for job: 20181230111603768040
2018-12-30 11:16:05,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-30 11:16:05,239 [salt.state       :300 ][INFO    ][22685] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'

2018-12-30 11:16:05,275 [salt.state       :915 ][INFO    ][22685] Loading fresh modules for state activity
2018-12-30 11:16:05,338 [salt.state       :1951][INFO    ][22685] Completed state [ceilometer-agent-notification] at time 11:16:05.338893 duration_in_ms=4488.913
2018-12-30 11:16:05,343 [salt.state       :1780][INFO    ][22685] Running state [ceilometer_ssl_rabbitmq] at time 11:16:05.343265
2018-12-30 11:16:05,352 [salt.state       :1813][INFO    ][22685] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2018-12-30 11:16:05,353 [salt.state       :300 ][INFO    ][22685] Running ceilometer._ssl.rabbitmq
2018-12-30 11:16:05,354 [salt.state       :1951][INFO    ][22685] Completed state [ceilometer_ssl_rabbitmq] at time 11:16:05.354112 duration_in_ms=10.847
2018-12-30 11:16:05,357 [salt.state       :1780][INFO    ][22685] Running state [/etc/ceilometer/ceilometer.conf] at time 11:16:05.357734
2018-12-30 11:16:05,358 [salt.state       :1813][INFO    ][22685] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-12-30 11:16:05,419 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/ceilometer-server.conf.Debian'
2018-12-30 11:16:05,811 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-12-30 11:16:05,868 [salt.state       :300 ][INFO    ][22685] File changed:
--- 
+++ 
@@ -1,15 +1,329 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: To reduce polling agent load, samples are sent to the
-# notification agent in a batch. To gain higher throughput at the cost of load
-# set this to False. This option is deprecated, to disable batching set
-# batch_size = 0 in the polling group. (boolean value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
 #batch_polled_samples = true
 
 # Inspector to use for inspecting the hypervisor layer. Known inspectors are
@@ -70,372 +384,6 @@
 # Minimum value: 1
 #max_parallel_requests = 64
 
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
 
 [coordination]
 
@@ -448,6 +396,7 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
@@ -529,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -593,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-DqEK8d/ceilometer-11.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -619,6 +522,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -636,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -666,633 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1307,10 +585,6 @@
 # pool with the same partitioning_group_prefix a disjoint subset of pollsters
 # should be loaded. (string value)
 #partitioning_group_prefix = <None>
-
-# Batch size of samples to send to notification agent, Set to 0 to disable
-# (integer value)
-#batch_size = 50
 
 
 [publisher]
@@ -1325,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1357,87 +632,115 @@
 #secret_key = <None>
 
 
-[rgw_client]
-
-#
-# From ceilometer
-#
-
-# Whether RGW uses implicit tenants or not. (boolean value)
-#implicit_tenants = false
-
-
 [service_credentials]
 
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1450,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1485,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (host address value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-12-30 11:16:05,879 [salt.state       :1951][INFO    ][22685] Completed state [/etc/ceilometer/ceilometer.conf] at time 11:16:05.878956 duration_in_ms=521.222
2018-12-30 11:16:05,879 [salt.state       :1780][INFO    ][22685] Running state [/etc/default/ceilometer-agent-central] at time 11:16:05.879715
2018-12-30 11:16:05,879 [salt.state       :1813][INFO    ][22685] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-12-30 11:16:05,917 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-12-30 11:16:05,957 [salt.state       :300 ][INFO    ][22685] File changed:
New file
2018-12-30 11:16:05,958 [salt.state       :1951][INFO    ][22685] Completed state [/etc/default/ceilometer-agent-central] at time 11:16:05.958325 duration_in_ms=78.609
2018-12-30 11:16:05,958 [salt.state       :1780][INFO    ][22685] Running state [/etc/default/ceilometer-agent-notification] at time 11:16:05.958724
2018-12-30 11:16:05,958 [salt.state       :1813][INFO    ][22685] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-12-30 11:16:06,024 [salt.state       :300 ][INFO    ][22685] File changed:
New file
2018-12-30 11:16:06,024 [salt.state       :1951][INFO    ][22685] Completed state [/etc/default/ceilometer-agent-notification] at time 11:16:06.024197 duration_in_ms=65.472
2018-12-30 11:16:06,054 [salt.state       :1780][INFO    ][22685] Running state [python-gnocchiclient] at time 11:16:06.054023
2018-12-30 11:16:06,054 [salt.state       :1813][INFO    ][22685] Executing state pkg.latest for [python-gnocchiclient]
2018-12-30 11:16:06,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-12-30 11:16:06,396 [salt.state       :300 ][INFO    ][22685] Package python-gnocchiclient is already up-to-date
2018-12-30 11:16:06,397 [salt.state       :1951][INFO    ][22685] Completed state [python-gnocchiclient] at time 11:16:06.397309 duration_in_ms=343.285
2018-12-30 11:16:06,397 [salt.state       :1780][INFO    ][22685] Running state [/etc/ceilometer/pipeline.yaml] at time 11:16:06.397832
2018-12-30 11:16:06,398 [salt.state       :1813][INFO    ][22685] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-12-30 11:16:06,453 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/pipeline.yaml'
2018-12-30 11:16:06,619 [salt.state       :300 ][INFO    ][22685] File changed:
New file
2018-12-30 11:16:06,626 [salt.state       :1951][INFO    ][22685] Completed state [/etc/ceilometer/pipeline.yaml] at time 11:16:06.626490 duration_in_ms=228.657
2018-12-30 11:16:06,627 [salt.state       :1780][INFO    ][22685] Running state [/etc/ceilometer/event_pipeline.yaml] at time 11:16:06.626980
2018-12-30 11:16:06,627 [salt.state       :1813][INFO    ][22685] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-12-30 11:16:06,650 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_pipeline.yaml'
2018-12-30 11:16:06,779 [salt.state       :300 ][INFO    ][22685] File changed:
New file
2018-12-30 11:16:06,784 [salt.state       :1951][INFO    ][22685] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 11:16:06.784498 duration_in_ms=157.516
2018-12-30 11:16:06,784 [salt.state       :1780][INFO    ][22685] Running state [/etc/ceilometer/event_definitions.yaml] at time 11:16:06.784942
2018-12-30 11:16:06,785 [salt.state       :1813][INFO    ][22685] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-12-30 11:16:06,809 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_definitions.yaml'
2018-12-30 11:16:06,847 [salt.state       :300 ][INFO    ][22685] File changed:
New file
2018-12-30 11:16:06,848 [salt.state       :1951][INFO    ][22685] Completed state [/etc/ceilometer/event_definitions.yaml] at time 11:16:06.848002 duration_in_ms=63.06
2018-12-30 11:16:06,848 [salt.state       :1780][INFO    ][22685] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 11:16:06.848783
2018-12-30 11:16:06,849 [salt.state       :1813][INFO    ][22685] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-12-30 11:16:06,870 [salt.fileclient  :1219][INFO    ][22685] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gabbi_pipeline.yaml'
2018-12-30 11:16:06,885 [salt.state       :300 ][INFO    ][22685] File changed:
New file
2018-12-30 11:16:06,885 [salt.state       :1951][INFO    ][22685] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 11:16:06.885674 duration_in_ms=36.891
2018-12-30 11:16:07,627 [salt.state       :1780][INFO    ][22685] Running state [ceilometer-agent-central] at time 11:16:07.627132
2018-12-30 11:16:07,628 [salt.state       :1813][INFO    ][22685] Executing state service.running for [ceilometer-agent-central]
2018-12-30 11:16:07,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-12-30 11:16:07,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-30 11:16:07,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-30 11:16:07,683 [salt.state       :300 ][INFO    ][22685] The service ceilometer-agent-central is already running
2018-12-30 11:16:07,684 [salt.state       :1951][INFO    ][22685] Completed state [ceilometer-agent-central] at time 11:16:07.684306 duration_in_ms=57.172
2018-12-30 11:16:07,685 [salt.state       :1780][INFO    ][22685] Running state [ceilometer-agent-central] at time 11:16:07.685026
2018-12-30 11:16:07,685 [salt.state       :1813][INFO    ][22685] Executing state service.mod_watch for [ceilometer-agent-central]
2018-12-30 11:16:07,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-30 11:16:07,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-30 11:16:07,919 [salt.state       :300 ][INFO    ][22685] {'ceilometer-agent-central': True}
2018-12-30 11:16:07,919 [salt.state       :1951][INFO    ][22685] Completed state [ceilometer-agent-central] at time 11:16:07.919859 duration_in_ms=234.831
2018-12-30 11:16:07,935 [salt.state       :1780][INFO    ][22685] Running state [ceilometer-agent-notification] at time 11:16:07.935315
2018-12-30 11:16:07,935 [salt.state       :1813][INFO    ][22685] Executing state service.running for [ceilometer-agent-notification]
2018-12-30 11:16:07,937 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-12-30 11:16:07,984 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-30 11:16:08,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-30 11:16:08,035 [salt.state       :300 ][INFO    ][22685] The service ceilometer-agent-notification is already running
2018-12-30 11:16:08,036 [salt.state       :1951][INFO    ][22685] Completed state [ceilometer-agent-notification] at time 11:16:08.036015 duration_in_ms=100.698
2018-12-30 11:16:08,036 [salt.state       :1780][INFO    ][22685] Running state [ceilometer-agent-notification] at time 11:16:08.036418
2018-12-30 11:16:08,036 [salt.state       :1813][INFO    ][22685] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-12-30 11:16:08,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-30 11:16:08,067 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22685] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-30 11:16:08,235 [salt.state       :300 ][INFO    ][22685] {'ceilometer-agent-notification': True}
2018-12-30 11:16:08,236 [salt.state       :1951][INFO    ][22685] Completed state [ceilometer-agent-notification] at time 11:16:08.236164 duration_in_ms=199.744
2018-12-30 11:16:08,248 [salt.minion      :1711][INFO    ][22685] Returning information for job: 20181230111523160386
2018-12-30 11:20:41,262 [salt.minion      :1308][INFO    ][1504] User sudo_ubuntu Executing command cp.push_dir with jid 20181230112041264338
2018-12-30 11:20:41,293 [salt.minion      :1432][INFO    ][25737] Starting a new job with PID 25737
