2018-12-27 11:35:25,447 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,578 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,581 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,583 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,587 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,900 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,905 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,910 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,972 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,976 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,979 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:25,982 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,086 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,216 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,220 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,223 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,228 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,231 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,234 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,238 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,242 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,245 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,248 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,253 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,256 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,260 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,263 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,268 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,271 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,275 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,278 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,281 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,284 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,287 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,290 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,293 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,296 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,300 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,303 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,307 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,310 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,313 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,316 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,320 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,323 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,326 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,330 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,332 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,336 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,338 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,342 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,345 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,348 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,352 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,356 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,359 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:26,363 [salt.utils.decorators:82  ][ERROR   ][1751] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-12-27 11:35:48,164 [salt.utils.decorators:613 ][WARNING ][1751] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-27 11:35:52,532 [salt.loaded.int.states.file:2298][WARNING ][1751] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:35:55,076 [salt.loaded.int.states.file:2298][WARNING ][1751] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:35:57,426 [salt.loaded.int.states.file:2298][WARNING ][1751] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:36:01,420 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2986] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-12-27 11:36:01,462 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2986] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-12-27 11:36:01,520 [salt.utils.parsers:1051][WARNING ][1374] Minion received a SIGTERM. Exiting.
2018-12-27 11:36:02,421 [salt.cli.daemons :293 ][INFO    ][3045] Setting up the Salt Minion "mdb02.mcp-ovs-dpdk-ha.local"
2018-12-27 11:36:02,526 [salt.cli.daemons :82  ][INFO    ][3045] Starting up the Salt Minion
2018-12-27 11:36:02,527 [salt.utils.event :1017][INFO    ][3045] Starting pull socket on /var/run/salt/minion/minion_event_7cf34547b8_pull.ipc
2018-12-27 11:36:03,300 [salt.minion      :976 ][INFO    ][3045] Creating minion process manager
2018-12-27 11:36:04,562 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3045] Executing command ['date', '+%z'] in directory '/root'
2018-12-27 11:36:04,593 [salt.utils.schedule:568 ][INFO    ][3045] Updating job settings for scheduled job: __mine_interval
2018-12-27 11:36:04,595 [salt.minion      :1108][INFO    ][3045] Added mine.update to scheduler
2018-12-27 11:36:04,599 [salt.minion      :1975][INFO    ][3045] Minion is starting as user 'root'
2018-12-27 11:36:04,612 [salt.minion      :2336][INFO    ][3045] Minion is ready to receive requests!
2018-12-27 11:36:32,532 [salt.minion      :1308][INFO    ][3045] User sudo_ubuntu Executing command state.apply with jid 20181227113632521419
2018-12-27 11:36:32,561 [salt.minion      :1432][INFO    ][3134] Starting a new job with PID 3134
2018-12-27 11:36:39,942 [salt.state       :915 ][INFO    ][3134] Loading fresh modules for state activity
2018-12-27 11:36:39,997 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-12-27 11:36:40,124 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-12-27 11:36:40,304 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-12-27 11:36:40,423 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-12-27 11:36:41,223 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2018-12-27 11:36:41,363 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2018-12-27 11:36:41,506 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2018-12-27 11:36:41,653 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2018-12-27 11:36:41,805 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-12-27 11:36:42,008 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-12-27 11:36:42,155 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-12-27 11:36:42,292 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-12-27 11:36:42,526 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-12-27 11:36:42,565 [salt.minion      :1308][INFO    ][3045] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227113642542143
2018-12-27 11:36:42,569 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-12-27 11:36:42,593 [salt.minion      :1432][INFO    ][3169] Starting a new job with PID 3169
2018-12-27 11:36:42,619 [salt.minion      :1711][INFO    ][3169] Returning information for job: 20181227113642542143
2018-12-27 11:36:42,734 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-12-27 11:36:42,886 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-12-27 11:36:43,013 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-12-27 11:36:43,184 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-12-27 11:36:43,312 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-12-27 11:36:43,429 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2018-12-27 11:36:43,549 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-12-27 11:36:43,981 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2018-12-27 11:36:44,141 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-12-27 11:36:44,279 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-12-27 11:36:44,415 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-12-27 11:36:44,542 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-12-27 11:36:44,690 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-12-27 11:36:44,912 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-12-27 11:36:45,180 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-12-27 11:36:45,316 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-12-27 11:36:45,444 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2018-12-27 11:36:45,593 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-12-27 11:36:45,617 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-12-27 11:36:45,665 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-12-27 11:36:45,713 [salt.state       :1780][INFO    ][3134] Running state [/etc/environment] at time 11:36:45.713242
2018-12-27 11:36:45,713 [salt.state       :1813][INFO    ][3134] Executing state file.blockreplace for [/etc/environment]
2018-12-27 11:36:45,722 [salt.state       :300 ][INFO    ][3134] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-12-27 11:36:45,723 [salt.state       :1951][INFO    ][3134] Completed state [/etc/environment] at time 11:36:45.723405 duration_in_ms=10.163
2018-12-27 11:36:45,723 [salt.state       :1780][INFO    ][3134] Running state [/etc/profile.d] at time 11:36:45.723648
2018-12-27 11:36:45,723 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/profile.d]
2018-12-27 11:36:45,742 [salt.state       :300 ][INFO    ][3134] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-12-27 11:36:45,742 [salt.state       :1951][INFO    ][3134] Completed state [/etc/profile.d] at time 11:36:45.742370 duration_in_ms=18.722
2018-12-27 11:36:45,742 [salt.state       :1780][INFO    ][3134] Running state [/etc/bash.bashrc] at time 11:36:45.742563
2018-12-27 11:36:45,742 [salt.state       :1813][INFO    ][3134] Executing state file.blockreplace for [/etc/bash.bashrc]
2018-12-27 11:36:46,622 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['git', '--version'] in directory '/root'
2018-12-27 11:36:46,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2018-12-27 11:36:46,824 [salt.state       :300 ][INFO    ][3134] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-12-27 11:36:46,825 [salt.state       :1951][INFO    ][3134] Completed state [/etc/bash.bashrc] at time 11:36:46.825001 duration_in_ms=1082.438
2018-12-27 11:36:46,825 [salt.state       :1780][INFO    ][3134] Running state [/etc/profile] at time 11:36:46.825307
2018-12-27 11:36:46,825 [salt.state       :1813][INFO    ][3134] Executing state file.blockreplace for [/etc/profile]
2018-12-27 11:36:46,831 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'test -f /etc/profile' in directory '/root'
2018-12-27 11:36:46,846 [salt.state       :300 ][INFO    ][3134] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-12-27 11:36:46,846 [salt.state       :1951][INFO    ][3134] Completed state [/etc/profile] at time 11:36:46.846806 duration_in_ms=21.499
2018-12-27 11:36:46,847 [salt.state       :1780][INFO    ][3134] Running state [/etc/login.defs] at time 11:36:46.847088
2018-12-27 11:36:46,847 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/login.defs]
2018-12-27 11:36:46,872 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2018-12-27 11:36:46,989 [salt.state       :300 ][INFO    ][3134] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2018-12-27 11:36:46,992 [salt.state       :1951][INFO    ][3134] Completed state [/etc/login.defs] at time 11:36:46.992342 duration_in_ms=145.254
2018-12-27 11:36:47,001 [salt.state       :1780][INFO    ][3134] Running state [at] at time 11:36:47.001837
2018-12-27 11:36:47,002 [salt.state       :1813][INFO    ][3134] Executing state pkg.installed for [at]
2018-12-27 11:36:47,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:36:47,348 [salt.state       :300 ][INFO    ][3134] All specified packages are already installed
2018-12-27 11:36:47,349 [salt.state       :1951][INFO    ][3134] Completed state [at] at time 11:36:47.349182 duration_in_ms=347.345
2018-12-27 11:36:47,353 [salt.state       :1780][INFO    ][3134] Running state [atd] at time 11:36:47.353024
2018-12-27 11:36:47,353 [salt.state       :1813][INFO    ][3134] Executing state service.running for [atd]
2018-12-27 11:36:47,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2018-12-27 11:36:47,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2018-12-27 11:36:47,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2018-12-27 11:36:47,426 [salt.state       :300 ][INFO    ][3134] The service atd is already running
2018-12-27 11:36:47,426 [salt.state       :1951][INFO    ][3134] Completed state [atd] at time 11:36:47.426692 duration_in_ms=73.668
2018-12-27 11:36:47,429 [salt.state       :1780][INFO    ][3134] Running state [cron] at time 11:36:47.429673
2018-12-27 11:36:47,430 [salt.state       :1813][INFO    ][3134] Executing state pkg.installed for [cron]
2018-12-27 11:36:47,445 [salt.state       :300 ][INFO    ][3134] All specified packages are already installed
2018-12-27 11:36:47,445 [salt.state       :1951][INFO    ][3134] Completed state [cron] at time 11:36:47.445493 duration_in_ms=15.819
2018-12-27 11:36:47,446 [salt.state       :1780][INFO    ][3134] Running state [/etc/at.allow] at time 11:36:47.446896
2018-12-27 11:36:47,447 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/at.allow]
2018-12-27 11:36:47,464 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2018-12-27 11:36:47,477 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:36:47,477 [salt.state       :1951][INFO    ][3134] Completed state [/etc/at.allow] at time 11:36:47.477801 duration_in_ms=30.905
2018-12-27 11:36:47,478 [salt.state       :1780][INFO    ][3134] Running state [/etc/at.deny] at time 11:36:47.478033
2018-12-27 11:36:47,478 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/at.deny]
2018-12-27 11:36:47,478 [salt.state       :300 ][INFO    ][3134] {'removed': '/etc/at.deny'}
2018-12-27 11:36:47,478 [salt.state       :1951][INFO    ][3134] Completed state [/etc/at.deny] at time 11:36:47.478851 duration_in_ms=0.818
2018-12-27 11:36:47,480 [salt.state       :1780][INFO    ][3134] Running state [cron] at time 11:36:47.479974
2018-12-27 11:36:47,480 [salt.state       :1813][INFO    ][3134] Executing state service.running for [cron]
2018-12-27 11:36:47,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2018-12-27 11:36:47,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2018-12-27 11:36:47,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2018-12-27 11:36:47,537 [salt.state       :300 ][INFO    ][3134] The service cron is already running
2018-12-27 11:36:47,538 [salt.state       :1951][INFO    ][3134] Completed state [cron] at time 11:36:47.538407 duration_in_ms=58.433
2018-12-27 11:36:47,541 [salt.state       :1780][INFO    ][3134] Running state [/etc/cron.allow] at time 11:36:47.541315
2018-12-27 11:36:47,542 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/cron.allow]
2018-12-27 11:36:47,576 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:36:47,576 [salt.state       :1951][INFO    ][3134] Completed state [/etc/cron.allow] at time 11:36:47.576852 duration_in_ms=35.536
2018-12-27 11:36:47,577 [salt.state       :1780][INFO    ][3134] Running state [/etc/cron.deny] at time 11:36:47.577067
2018-12-27 11:36:47,577 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/cron.deny]
2018-12-27 11:36:47,577 [salt.state       :300 ][INFO    ][3134] File /etc/cron.deny is not present
2018-12-27 11:36:47,577 [salt.state       :1951][INFO    ][3134] Completed state [/etc/cron.deny] at time 11:36:47.577749 duration_in_ms=0.682
2018-12-27 11:36:47,579 [salt.state       :1780][INFO    ][3134] Running state [/etc/crontab] at time 11:36:47.579071
2018-12-27 11:36:47,579 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/crontab]
2018-12-27 11:36:47,580 [salt.state       :300 ][INFO    ][3134] {'mode': '0600'}
2018-12-27 11:36:47,580 [salt.state       :1951][INFO    ][3134] Completed state [/etc/crontab] at time 11:36:47.580727 duration_in_ms=1.656
2018-12-27 11:36:47,581 [salt.state       :1780][INFO    ][3134] Running state [/etc/cron.d] at time 11:36:47.581656
2018-12-27 11:36:47,581 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/cron.d]
2018-12-27 11:36:47,584 [salt.state       :300 ][INFO    ][3134] {'mode': '0600'}
2018-12-27 11:36:47,585 [salt.state       :1951][INFO    ][3134] Completed state [/etc/cron.d] at time 11:36:47.585158 duration_in_ms=3.502
2018-12-27 11:36:47,586 [salt.state       :1780][INFO    ][3134] Running state [/etc/cron.daily] at time 11:36:47.586928
2018-12-27 11:36:47,587 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/cron.daily]
2018-12-27 11:36:47,598 [salt.state       :300 ][INFO    ][3134] {'mode': '0600'}
2018-12-27 11:36:47,599 [salt.state       :1951][INFO    ][3134] Completed state [/etc/cron.daily] at time 11:36:47.599138 duration_in_ms=12.21
2018-12-27 11:36:47,600 [salt.state       :1780][INFO    ][3134] Running state [/etc/cron.hourly] at time 11:36:47.600275
2018-12-27 11:36:47,600 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/cron.hourly]
2018-12-27 11:36:47,602 [salt.state       :300 ][INFO    ][3134] {'mode': '0600'}
2018-12-27 11:36:47,602 [salt.state       :1951][INFO    ][3134] Completed state [/etc/cron.hourly] at time 11:36:47.602446 duration_in_ms=2.171
2018-12-27 11:36:47,604 [salt.state       :1780][INFO    ][3134] Running state [/etc/cron.monthly] at time 11:36:47.604625
2018-12-27 11:36:47,604 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/cron.monthly]
2018-12-27 11:36:47,607 [salt.state       :300 ][INFO    ][3134] {'mode': '0600'}
2018-12-27 11:36:47,607 [salt.state       :1951][INFO    ][3134] Completed state [/etc/cron.monthly] at time 11:36:47.607580 duration_in_ms=2.955
2018-12-27 11:36:47,608 [salt.state       :1780][INFO    ][3134] Running state [/etc/cron.weekly] at time 11:36:47.608481
2018-12-27 11:36:47,608 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/cron.weekly]
2018-12-27 11:36:47,610 [salt.state       :300 ][INFO    ][3134] {'mode': '0600'}
2018-12-27 11:36:47,610 [salt.state       :1951][INFO    ][3134] Completed state [/etc/cron.weekly] at time 11:36:47.610673 duration_in_ms=2.192
2018-12-27 11:36:47,614 [salt.state       :1780][INFO    ][3134] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 11:36:47.613977
2018-12-27 11:36:47,616 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-12-27 11:36:47,636 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-12-27 11:36:47,652 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:36:47,652 [salt.state       :1951][INFO    ][3134] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 11:36:47.652606 duration_in_ms=38.629
2018-12-27 11:36:47,653 [salt.state       :1780][INFO    ][3134] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 11:36:47.653106
2018-12-27 11:36:47,653 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-12-27 11:36:47,673 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:36:47,673 [salt.state       :1951][INFO    ][3134] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 11:36:47.673838 duration_in_ms=20.732
2018-12-27 11:36:47,675 [salt.state       :1780][INFO    ][3134] Running state [linux_repo_prereq_pkgs] at time 11:36:47.675452
2018-12-27 11:36:47,676 [salt.state       :1813][INFO    ][3134] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-12-27 11:36:47,688 [salt.state       :300 ][INFO    ][3134] All specified packages are already installed
2018-12-27 11:36:47,688 [salt.state       :1951][INFO    ][3134] Completed state [linux_repo_prereq_pkgs] at time 11:36:47.688464 duration_in_ms=13.012
2018-12-27 11:36:47,688 [salt.state       :1780][INFO    ][3134] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 11:36:47.688668
2018-12-27 11:36:47,688 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-12-27 11:36:47,689 [salt.state       :300 ][INFO    ][3134] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-12-27 11:36:47,689 [salt.state       :1951][INFO    ][3134] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 11:36:47.689287 duration_in_ms=0.619
2018-12-27 11:36:47,689 [salt.state       :1780][INFO    ][3134] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 11:36:47.689471
2018-12-27 11:36:47,689 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-12-27 11:36:47,689 [salt.state       :300 ][INFO    ][3134] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-12-27 11:36:47,690 [salt.state       :1951][INFO    ][3134] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 11:36:47.690099 duration_in_ms=0.627
2018-12-27 11:36:47,690 [salt.state       :1780][INFO    ][3134] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 11:36:47.690317
2018-12-27 11:36:47,690 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-12-27 11:36:47,707 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-12-27 11:36:47,829 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:36:47,829 [salt.state       :1951][INFO    ][3134] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 11:36:47.829377 duration_in_ms=139.06
2018-12-27 11:36:47,832 [salt.state       :1780][INFO    ][3134] Running state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 11:36:47.832523
2018-12-27 11:36:47,832 [salt.state       :1813][INFO    ][3134] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main]
2018-12-27 11:36:48,129 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-rocky/xenial/archive-openstack-rocky.key'] in directory '/root'
2018-12-27 11:36:48,362 [salt.state       :300 ][INFO    ][3134] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main'}
2018-12-27 11:36:48,363 [salt.state       :1951][INFO    ][3134] Completed state [deb http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial main] at time 11:36:48.363334 duration_in_ms=530.807
2018-12-27 11:36:48,363 [salt.state       :1780][INFO    ][3134] Running state [pkg.refresh_db] at time 11:36:48.363669
2018-12-27 11:36:48,363 [salt.state       :1813][INFO    ][3134] Executing state module.run for [pkg.refresh_db]
2018-12-27 11:36:48,364 [salt.utils.decorators:613 ][WARNING ][3134] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-27 11:36:48,364 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 11:36:52,185 [salt.state       :300 ][INFO    ][3134] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial InRelease': True, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-rocky/xenial xenial/main amd64 Packages': True}}
2018-12-27 11:36:52,186 [salt.state       :1951][INFO    ][3134] Completed state [pkg.refresh_db] at time 11:36:52.186267 duration_in_ms=3822.598
2018-12-27 11:36:52,186 [salt.state       :1780][INFO    ][3134] Running state [linux_extra_packages_removed] at time 11:36:52.186955
2018-12-27 11:36:52,187 [salt.state       :1813][INFO    ][3134] Executing state pkg.removed for [linux_extra_packages_removed]
2018-12-27 11:36:52,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2018-12-27 11:36:52,737 [salt.minion      :1308][INFO    ][3045] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227113652721854
2018-12-27 11:36:52,760 [salt.minion      :1432][INFO    ][3691] Starting a new job with PID 3691
2018-12-27 11:36:52,783 [salt.minion      :1711][INFO    ][3691] Returning information for job: 20181227113652721854
2018-12-27 11:36:53,938 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:36:53,985 [salt.state       :300 ][INFO    ][3134] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2018-12-27 11:36:54,014 [salt.state       :915 ][INFO    ][3134] Loading fresh modules for state activity
2018-12-27 11:36:54,066 [salt.state       :1951][INFO    ][3134] Completed state [linux_extra_packages_removed] at time 11:36:54.066738 duration_in_ms=1880.065
2018-12-27 11:36:54,073 [salt.state       :1780][INFO    ][3134] Running state [linux_extra_packages_latest] at time 11:36:54.073445
2018-12-27 11:36:54,074 [salt.state       :1813][INFO    ][3134] Executing state pkg.latest for [linux_extra_packages_latest]
2018-12-27 11:36:54,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-12-27 11:36:54,954 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:36:54,980 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-12-27 11:36:57,691 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:36:57,737 [salt.state       :300 ][INFO    ][3134] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-12-27 11:36:57,768 [salt.state       :915 ][INFO    ][3134] Loading fresh modules for state activity
2018-12-27 11:36:57,815 [salt.state       :1951][INFO    ][3134] Completed state [linux_extra_packages_latest] at time 11:36:57.815051 duration_in_ms=3741.606
2018-12-27 11:36:57,820 [salt.state       :1780][INFO    ][3134] Running state [UTC] at time 11:36:57.820721
2018-12-27 11:36:57,821 [salt.state       :1813][INFO    ][3134] Executing state timezone.system for [UTC]
2018-12-27 11:36:57,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['timedatectl'] in directory '/root'
2018-12-27 11:36:57,885 [salt.state       :300 ][INFO    ][3134] Timezone UTC already set, UTC already set to UTC
2018-12-27 11:36:57,886 [salt.state       :1951][INFO    ][3134] Completed state [UTC] at time 11:36:57.885956 duration_in_ms=65.234
2018-12-27 11:36:57,890 [salt.state       :1780][INFO    ][3134] Running state [/etc/default/grub.d] at time 11:36:57.890235
2018-12-27 11:36:57,890 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/default/grub.d]
2018-12-27 11:36:57,897 [salt.state       :300 ][INFO    ][3134] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-12-27 11:36:57,898 [salt.state       :1951][INFO    ][3134] Completed state [/etc/default/grub.d] at time 11:36:57.898671 duration_in_ms=8.436
2018-12-27 11:36:57,899 [salt.state       :1780][INFO    ][3134] Running state [update-grub] at time 11:36:57.899629
2018-12-27 11:36:57,900 [salt.state       :1813][INFO    ][3134] Executing state cmd.wait for [update-grub]
2018-12-27 11:36:57,900 [salt.state       :300 ][INFO    ][3134] No changes made for update-grub
2018-12-27 11:36:57,900 [salt.state       :1951][INFO    ][3134] Completed state [update-grub] at time 11:36:57.900945 duration_in_ms=1.316
2018-12-27 11:36:57,905 [salt.state       :1780][INFO    ][3134] Running state [/boot/grub/grub.cfg] at time 11:36:57.905442
2018-12-27 11:36:57,905 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/boot/grub/grub.cfg]
2018-12-27 11:36:58,924 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-12-27 11:36:58,943 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:36:58,945 [salt.state       :300 ][INFO    ][3134] {'mode': '0400'}
2018-12-27 11:36:58,946 [salt.state       :1951][INFO    ][3134] Completed state [/boot/grub/grub.cfg] at time 11:36:58.946378 duration_in_ms=1040.936
2018-12-27 11:36:58,947 [salt.state       :1780][INFO    ][3134] Running state [nf_conntrack] at time 11:36:58.947614
2018-12-27 11:36:58,948 [salt.state       :1813][INFO    ][3134] Executing state kmod.present for [nf_conntrack]
2018-12-27 11:36:58,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'lsmod' in directory '/root'
2018-12-27 11:36:59,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'lsmod' in directory '/root'
2018-12-27 11:36:59,503 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-12-27 11:36:59,525 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'lsmod' in directory '/root'
2018-12-27 11:36:59,638 [salt.state       :300 ][INFO    ][3134] {'nf_conntrack': 'loaded'}
2018-12-27 11:36:59,639 [salt.state       :1951][INFO    ][3134] Completed state [nf_conntrack] at time 11:36:59.638969 duration_in_ms=691.355
2018-12-27 11:36:59,639 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d] at time 11:36:59.639902
2018-12-27 11:36:59,640 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/modprobe.d]
2018-12-27 11:36:59,641 [salt.state       :300 ][INFO    ][3134] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2018-12-27 11:36:59,642 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d] at time 11:36:59.642038 duration_in_ms=2.136
2018-12-27 11:36:59,645 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/hfsplus.conf] at time 11:36:59.645383
2018-12-27 11:36:59,645 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2018-12-27 11:36:59,664 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2018-12-27 11:36:59,824 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:36:59,825 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/hfsplus.conf] at time 11:36:59.825557 duration_in_ms=180.174
2018-12-27 11:36:59,828 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/rds.conf] at time 11:36:59.828285
2018-12-27 11:36:59,828 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2018-12-27 11:36:59,994 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:36:59,994 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/rds.conf] at time 11:36:59.994875 duration_in_ms=166.589
2018-12-27 11:36:59,996 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/cramfs.conf] at time 11:36:59.996664
2018-12-27 11:36:59,997 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2018-12-27 11:37:00,171 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:00,171 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/cramfs.conf] at time 11:37:00.171321 duration_in_ms=174.655
2018-12-27 11:37:00,173 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/freevxfs.conf] at time 11:37:00.173022
2018-12-27 11:37:00,173 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2018-12-27 11:37:00,331 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:00,332 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/freevxfs.conf] at time 11:37:00.332160 duration_in_ms=159.138
2018-12-27 11:37:00,335 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/hfs.conf] at time 11:37:00.335054
2018-12-27 11:37:00,335 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2018-12-27 11:37:00,498 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:00,499 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/hfs.conf] at time 11:37:00.499394 duration_in_ms=164.34
2018-12-27 11:37:00,500 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/squashfs.conf] at time 11:37:00.500726
2018-12-27 11:37:00,501 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2018-12-27 11:37:00,663 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:00,663 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/squashfs.conf] at time 11:37:00.663558 duration_in_ms=162.832
2018-12-27 11:37:00,666 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/udf.conf] at time 11:37:00.665974
2018-12-27 11:37:00,666 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2018-12-27 11:37:01,557 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:01,557 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/udf.conf] at time 11:37:01.557885 duration_in_ms=891.911
2018-12-27 11:37:01,560 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/vfat.conf] at time 11:37:01.560896
2018-12-27 11:37:01,561 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2018-12-27 11:37:01,721 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:01,722 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/vfat.conf] at time 11:37:01.722020 duration_in_ms=161.123
2018-12-27 11:37:01,723 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/sctp.conf] at time 11:37:01.723620
2018-12-27 11:37:01,723 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2018-12-27 11:37:01,878 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:01,878 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/sctp.conf] at time 11:37:01.878408 duration_in_ms=154.788
2018-12-27 11:37:01,880 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/jffs2.conf] at time 11:37:01.880619
2018-12-27 11:37:01,880 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2018-12-27 11:37:02,032 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:02,032 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/jffs2.conf] at time 11:37:02.032693 duration_in_ms=152.072
2018-12-27 11:37:02,034 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/tipc.conf] at time 11:37:02.034632
2018-12-27 11:37:02,034 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2018-12-27 11:37:02,200 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:02,200 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/tipc.conf] at time 11:37:02.200442 duration_in_ms=165.81
2018-12-27 11:37:02,202 [salt.state       :1780][INFO    ][3134] Running state [/etc/modprobe.d/dccp.conf] at time 11:37:02.202047
2018-12-27 11:37:02,202 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2018-12-27 11:37:02,360 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:02,361 [salt.state       :1951][INFO    ][3134] Completed state [/etc/modprobe.d/dccp.conf] at time 11:37:02.360989 duration_in_ms=158.929
2018-12-27 11:37:02,361 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_congestion_control] at time 11:37:02.361245
2018-12-27 11:37:02,361 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-12-27 11:37:02,363 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-12-27 11:37:02,389 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-12-27 11:37:02,390 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_congestion_control] at time 11:37:02.390323 duration_in_ms=29.078
2018-12-27 11:37:02,391 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_slow_start_after_idle] at time 11:37:02.390990
2018-12-27 11:37:02,392 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-12-27 11:37:02,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-12-27 11:37:02,409 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-12-27 11:37:02,409 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 11:37:02.409829 duration_in_ms=18.839
2018-12-27 11:37:02,410 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 11:37:02.410207
2018-12-27 11:37:02,410 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2018-12-27 11:37:02,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2018-12-27 11:37:02,428 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2018-12-27 11:37:02,428 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 11:37:02.428581 duration_in_ms=18.374
2018-12-27 11:37:02,428 [salt.state       :1780][INFO    ][3134] Running state [net.nf_conntrack_max] at time 11:37:02.428950
2018-12-27 11:37:02,429 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.nf_conntrack_max]
2018-12-27 11:37:02,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-12-27 11:37:02,449 [salt.state       :300 ][INFO    ][3134] {'net.nf_conntrack_max': 1048576}
2018-12-27 11:37:02,449 [salt.state       :1951][INFO    ][3134] Completed state [net.nf_conntrack_max] at time 11:37:02.449757 duration_in_ms=20.807
2018-12-27 11:37:02,450 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 11:37:02.450139
2018-12-27 11:37:02,450 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2018-12-27 11:37:02,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2018-12-27 11:37:02,468 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2018-12-27 11:37:02,469 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 11:37:02.469032 duration_in_ms=18.893
2018-12-27 11:37:02,469 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.default.log_martians] at time 11:37:02.469392
2018-12-27 11:37:02,469 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2018-12-27 11:37:02,470 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2018-12-27 11:37:02,486 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.default.log_martians': 1}
2018-12-27 11:37:02,487 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.default.log_martians] at time 11:37:02.487261 duration_in_ms=17.868
2018-12-27 11:37:02,488 [salt.state       :1780][INFO    ][3134] Running state [net.core.somaxconn] at time 11:37:02.488311
2018-12-27 11:37:02,488 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.core.somaxconn]
2018-12-27 11:37:02,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-12-27 11:37:02,507 [salt.state       :300 ][INFO    ][3134] {'net.core.somaxconn': 4096}
2018-12-27 11:37:02,509 [salt.state       :1951][INFO    ][3134] Completed state [net.core.somaxconn] at time 11:37:02.509326 duration_in_ms=21.014
2018-12-27 11:37:02,509 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.all.send_redirects] at time 11:37:02.509697
2018-12-27 11:37:02,510 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2018-12-27 11:37:02,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2018-12-27 11:37:02,528 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.all.send_redirects': 0}
2018-12-27 11:37:02,529 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.all.send_redirects] at time 11:37:02.528988 duration_in_ms=19.291
2018-12-27 11:37:02,529 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_tw_reuse] at time 11:37:02.529350
2018-12-27 11:37:02,529 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-12-27 11:37:02,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-12-27 11:37:02,548 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_tw_reuse': 1}
2018-12-27 11:37:02,549 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_tw_reuse] at time 11:37:02.549082 duration_in_ms=19.731
2018-12-27 11:37:02,549 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.default.rp_filter] at time 11:37:02.549735
2018-12-27 11:37:02,550 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2018-12-27 11:37:02,551 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2018-12-27 11:37:02,570 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.default.rp_filter': 1}
2018-12-27 11:37:02,570 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.default.rp_filter] at time 11:37:02.570451 duration_in_ms=20.716
2018-12-27 11:37:02,570 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_fin_timeout] at time 11:37:02.570812
2018-12-27 11:37:02,571 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-12-27 11:37:02,573 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-12-27 11:37:02,596 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_fin_timeout': 30}
2018-12-27 11:37:02,597 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_fin_timeout] at time 11:37:02.597047 duration_in_ms=26.235
2018-12-27 11:37:02,597 [salt.state       :1780][INFO    ][3134] Running state [kernel.panic] at time 11:37:02.597425
2018-12-27 11:37:02,597 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [kernel.panic]
2018-12-27 11:37:02,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-12-27 11:37:02,623 [salt.state       :300 ][INFO    ][3134] {'kernel.panic': 60}
2018-12-27 11:37:02,624 [salt.state       :1951][INFO    ][3134] Completed state [kernel.panic] at time 11:37:02.624775 duration_in_ms=27.35
2018-12-27 11:37:02,625 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_keepalive_probes] at time 11:37:02.625185
2018-12-27 11:37:02,625 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-12-27 11:37:02,627 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-12-27 11:37:02,645 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_keepalive_probes': 8}
2018-12-27 11:37:02,645 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_keepalive_probes] at time 11:37:02.645531 duration_in_ms=20.346
2018-12-27 11:37:02,645 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.all.log_martians] at time 11:37:02.645892
2018-12-27 11:37:02,646 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2018-12-27 11:37:02,647 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2018-12-27 11:37:02,663 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.all.log_martians': 1}
2018-12-27 11:37:02,664 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.all.log_martians] at time 11:37:02.664511 duration_in_ms=18.619
2018-12-27 11:37:02,665 [salt.state       :1780][INFO    ][3134] Running state [fs.suid_dumpable] at time 11:37:02.665277
2018-12-27 11:37:02,665 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [fs.suid_dumpable]
2018-12-27 11:37:02,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2018-12-27 11:37:02,681 [salt.state       :300 ][INFO    ][3134] {'fs.suid_dumpable': 0}
2018-12-27 11:37:02,682 [salt.state       :1951][INFO    ][3134] Completed state [fs.suid_dumpable] at time 11:37:02.682331 duration_in_ms=17.054
2018-12-27 11:37:02,683 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.default.accept_redirects] at time 11:37:02.683001
2018-12-27 11:37:02,683 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2018-12-27 11:37:02,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2018-12-27 11:37:02,701 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.default.accept_redirects': 0}
2018-12-27 11:37:02,701 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.default.accept_redirects] at time 11:37:02.701605 duration_in_ms=18.604
2018-12-27 11:37:02,702 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.default.secure_redirects] at time 11:37:02.702322
2018-12-27 11:37:02,702 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2018-12-27 11:37:02,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2018-12-27 11:37:02,720 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.default.secure_redirects': 0}
2018-12-27 11:37:02,720 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.default.secure_redirects] at time 11:37:02.720671 duration_in_ms=18.348
2018-12-27 11:37:02,721 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.default.accept_source_route] at time 11:37:02.721144
2018-12-27 11:37:02,721 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2018-12-27 11:37:02,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2018-12-27 11:37:02,741 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.default.accept_source_route': 0}
2018-12-27 11:37:02,741 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.default.accept_source_route] at time 11:37:02.741690 duration_in_ms=20.546
2018-12-27 11:37:02,742 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_keepalive_intvl] at time 11:37:02.742073
2018-12-27 11:37:02,742 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-12-27 11:37:02,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-12-27 11:37:02,757 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-12-27 11:37:02,758 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_keepalive_intvl] at time 11:37:02.758255 duration_in_ms=16.201
2018-12-27 11:37:02,758 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_keepalive_time] at time 11:37:02.758918
2018-12-27 11:37:02,760 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-12-27 11:37:02,762 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-12-27 11:37:02,779 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_keepalive_time': 30}
2018-12-27 11:37:02,780 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_keepalive_time] at time 11:37:02.780772 duration_in_ms=21.853
2018-12-27 11:37:02,781 [salt.state       :1780][INFO    ][3134] Running state [kernel.randomize_va_space] at time 11:37:02.781692
2018-12-27 11:37:02,782 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [kernel.randomize_va_space]
2018-12-27 11:37:02,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2018-12-27 11:37:02,795 [salt.minion      :1308][INFO    ][3045] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227113702785718
2018-12-27 11:37:02,804 [salt.state       :300 ][INFO    ][3134] {'kernel.randomize_va_space': 2}
2018-12-27 11:37:02,805 [salt.state       :1951][INFO    ][3134] Completed state [kernel.randomize_va_space] at time 11:37:02.805155 duration_in_ms=23.463
2018-12-27 11:37:02,805 [salt.state       :1780][INFO    ][3134] Running state [fs.file-max] at time 11:37:02.805535
2018-12-27 11:37:02,805 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [fs.file-max]
2018-12-27 11:37:02,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-12-27 11:37:02,818 [salt.minion      :1432][INFO    ][4189] Starting a new job with PID 4189
2018-12-27 11:37:02,837 [salt.state       :300 ][INFO    ][3134] {'fs.file-max': 124165}
2018-12-27 11:37:02,837 [salt.state       :1951][INFO    ][3134] Completed state [fs.file-max] at time 11:37:02.837806 duration_in_ms=32.27
2018-12-27 11:37:02,838 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_syncookies] at time 11:37:02.838232
2018-12-27 11:37:02,838 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2018-12-27 11:37:02,839 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2018-12-27 11:37:02,845 [salt.minion      :1711][INFO    ][4189] Returning information for job: 20181227113702785718
2018-12-27 11:37:02,861 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_syncookies': 1}
2018-12-27 11:37:02,862 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_syncookies] at time 11:37:02.862786 duration_in_ms=24.554
2018-12-27 11:37:02,863 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_max_syn_backlog] at time 11:37:02.863204
2018-12-27 11:37:02,863 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-12-27 11:37:02,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-12-27 11:37:02,885 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-12-27 11:37:02,885 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_max_syn_backlog] at time 11:37:02.885428 duration_in_ms=22.224
2018-12-27 11:37:02,885 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.all.rp_filter] at time 11:37:02.885802
2018-12-27 11:37:02,886 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2018-12-27 11:37:02,889 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2018-12-27 11:37:02,909 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.all.rp_filter': 1}
2018-12-27 11:37:02,909 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.all.rp_filter] at time 11:37:02.909656 duration_in_ms=23.853
2018-12-27 11:37:02,910 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.all.accept_source_route] at time 11:37:02.910029
2018-12-27 11:37:02,910 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2018-12-27 11:37:02,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2018-12-27 11:37:02,929 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.all.accept_source_route': 0}
2018-12-27 11:37:02,930 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.all.accept_source_route] at time 11:37:02.929947 duration_in_ms=19.918
2018-12-27 11:37:02,930 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.tcp_retries2] at time 11:37:02.930650
2018-12-27 11:37:02,930 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-12-27 11:37:02,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-12-27 11:37:02,949 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.tcp_retries2': 5}
2018-12-27 11:37:02,949 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.tcp_retries2] at time 11:37:02.949577 duration_in_ms=18.926
2018-12-27 11:37:02,949 [salt.state       :1780][INFO    ][3134] Running state [net.core.netdev_max_backlog] at time 11:37:02.949936
2018-12-27 11:37:02,951 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-12-27 11:37:02,953 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-12-27 11:37:02,971 [salt.state       :300 ][INFO    ][3134] {'net.core.netdev_max_backlog': 261144}
2018-12-27 11:37:02,971 [salt.state       :1951][INFO    ][3134] Completed state [net.core.netdev_max_backlog] at time 11:37:02.971372 duration_in_ms=21.436
2018-12-27 11:37:02,972 [salt.state       :1780][INFO    ][3134] Running state [vm.swappiness] at time 11:37:02.971779
2018-12-27 11:37:02,972 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [vm.swappiness]
2018-12-27 11:37:02,973 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-12-27 11:37:02,991 [salt.state       :300 ][INFO    ][3134] {'vm.swappiness': 10}
2018-12-27 11:37:02,991 [salt.state       :1951][INFO    ][3134] Completed state [vm.swappiness] at time 11:37:02.991837 duration_in_ms=20.058
2018-12-27 11:37:02,992 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.all.secure_redirects] at time 11:37:02.992532
2018-12-27 11:37:02,992 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2018-12-27 11:37:02,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2018-12-27 11:37:03,013 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.all.secure_redirects': 0}
2018-12-27 11:37:03,014 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.all.secure_redirects] at time 11:37:03.013946 duration_in_ms=21.414
2018-12-27 11:37:03,015 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.neigh.default.gc_thresh1] at time 11:37:03.015196
2018-12-27 11:37:03,016 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-12-27 11:37:03,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-12-27 11:37:03,035 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-12-27 11:37:03,036 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 11:37:03.035922 duration_in_ms=20.725
2018-12-27 11:37:03,036 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.neigh.default.gc_thresh2] at time 11:37:03.036329
2018-12-27 11:37:03,036 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-12-27 11:37:03,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-12-27 11:37:03,056 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-12-27 11:37:03,056 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 11:37:03.056469 duration_in_ms=20.14
2018-12-27 11:37:03,057 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.neigh.default.gc_thresh3] at time 11:37:03.057150
2018-12-27 11:37:03,057 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-12-27 11:37:03,059 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-12-27 11:37:03,077 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-12-27 11:37:03,077 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 11:37:03.077897 duration_in_ms=20.747
2018-12-27 11:37:03,078 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.default.send_redirects] at time 11:37:03.078633
2018-12-27 11:37:03,078 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2018-12-27 11:37:03,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2018-12-27 11:37:03,097 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.default.send_redirects': 0}
2018-12-27 11:37:03,098 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.default.send_redirects] at time 11:37:03.098732 duration_in_ms=20.099
2018-12-27 11:37:03,099 [salt.state       :1780][INFO    ][3134] Running state [net.ipv4.conf.all.accept_redirects] at time 11:37:03.099102
2018-12-27 11:37:03,099 [salt.state       :1813][INFO    ][3134] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2018-12-27 11:37:03,101 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2018-12-27 11:37:03,116 [salt.state       :300 ][INFO    ][3134] {'net.ipv4.conf.all.accept_redirects': 0}
2018-12-27 11:37:03,116 [salt.state       :1951][INFO    ][3134] Completed state [net.ipv4.conf.all.accept_redirects] at time 11:37:03.116897 duration_in_ms=17.794
2018-12-27 11:37:03,117 [salt.state       :1780][INFO    ][3134] Running state [linux_sysfs_package] at time 11:37:03.117264
2018-12-27 11:37:03,117 [salt.state       :1813][INFO    ][3134] Executing state pkg.installed for [linux_sysfs_package]
2018-12-27 11:37:03,153 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-12-27 11:37:03,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 11:37:05,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:37:05,250 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-12-27 11:37:09,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:37:09,381 [salt.state       :300 ][INFO    ][3134] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-12-27 11:37:09,407 [salt.state       :915 ][INFO    ][3134] Loading fresh modules for state activity
2018-12-27 11:37:09,457 [salt.state       :1951][INFO    ][3134] Completed state [linux_sysfs_package] at time 11:37:09.457129 duration_in_ms=6339.865
2018-12-27 11:37:09,466 [salt.state       :1780][INFO    ][3134] Running state [/etc/sysfs.d] at time 11:37:09.466919
2018-12-27 11:37:09,467 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/etc/sysfs.d]
2018-12-27 11:37:09,474 [salt.state       :300 ][INFO    ][3134] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-12-27 11:37:09,474 [salt.state       :1951][INFO    ][3134] Completed state [/etc/sysfs.d] at time 11:37:09.474385 duration_in_ms=7.465
2018-12-27 11:37:09,476 [salt.state       :1780][INFO    ][3134] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 11:37:09.476432
2018-12-27 11:37:09,476 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2018-12-27 11:37:09,500 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/sysfs.conf'
2018-12-27 11:37:09,521 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:09,521 [salt.state       :1951][INFO    ][3134] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 11:37:09.521541 duration_in_ms=45.108
2018-12-27 11:37:09,522 [salt.state       :1780][INFO    ][3134] Running state [sysfs.write] at time 11:37:09.522274
2018-12-27 11:37:09,522 [salt.state       :1813][INFO    ][3134] Executing state module.run for [sysfs.write]
2018-12-27 11:37:09,522 [salt.utils.decorators:613 ][WARNING ][3134] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-27 11:37:09,525 [salt.state       :300 ][INFO    ][3134] {'ret': True}
2018-12-27 11:37:09,525 [salt.state       :1951][INFO    ][3134] Completed state [sysfs.write] at time 11:37:09.525428 duration_in_ms=3.154
2018-12-27 11:37:10,149 [salt.state       :1780][INFO    ][3134] Running state [ondemand] at time 11:37:10.149401
2018-12-27 11:37:10,149 [salt.state       :1813][INFO    ][3134] Executing state service.dead for [ondemand]
2018-12-27 11:37:10,151 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-12-27 11:37:10,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-12-27 11:37:10,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-27 11:37:10,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-12-27 11:37:10,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-12-27 11:37:10,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-27 11:37:10,341 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-27 11:37:10,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-12-27 11:37:10,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-12-27 11:37:10,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'runlevel' in directory '/root'
2018-12-27 11:37:10,622 [salt.state       :300 ][INFO    ][3134] {'ondemand': True}
2018-12-27 11:37:10,623 [salt.state       :1951][INFO    ][3134] Completed state [ondemand] at time 11:37:10.623214 duration_in_ms=473.812
2018-12-27 11:37:10,626 [salt.state       :1780][INFO    ][3134] Running state [en_US.UTF-8] at time 11:37:10.626149
2018-12-27 11:37:10,626 [salt.state       :1813][INFO    ][3134] Executing state locale.present for [en_US.UTF-8]
2018-12-27 11:37:10,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'locale -a' in directory '/root'
2018-12-27 11:37:10,647 [salt.state       :300 ][INFO    ][3134] Locale en_US.UTF-8 is already present
2018-12-27 11:37:10,648 [salt.state       :1951][INFO    ][3134] Completed state [en_US.UTF-8] at time 11:37:10.648369 duration_in_ms=22.219
2018-12-27 11:37:10,651 [salt.state       :1780][INFO    ][3134] Running state [en_US.UTF-8] at time 11:37:10.651756
2018-12-27 11:37:10,653 [salt.state       :1813][INFO    ][3134] Executing state locale.system for [en_US.UTF-8]
2018-12-27 11:37:10,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'localectl' in directory '/root'
2018-12-27 11:37:10,707 [salt.state       :300 ][INFO    ][3134] System locale en_US.UTF-8 already set
2018-12-27 11:37:10,708 [salt.state       :1951][INFO    ][3134] Completed state [en_US.UTF-8] at time 11:37:10.708335 duration_in_ms=56.579
2018-12-27 11:37:10,709 [salt.state       :1780][INFO    ][3134] Running state [root] at time 11:37:10.709724
2018-12-27 11:37:10,710 [salt.state       :1813][INFO    ][3134] Executing state group.present for [root]
2018-12-27 11:37:10,711 [salt.state       :300 ][INFO    ][3134] Group root is present and up to date
2018-12-27 11:37:10,715 [salt.state       :1951][INFO    ][3134] Completed state [root] at time 11:37:10.714979 duration_in_ms=5.255
2018-12-27 11:37:10,719 [salt.state       :1780][INFO    ][3134] Running state [root] at time 11:37:10.719793
2018-12-27 11:37:10,720 [salt.state       :1813][INFO    ][3134] Executing state user.present for [root]
2018-12-27 11:37:10,727 [salt.state       :300 ][INFO    ][3134] User root is present and up to date
2018-12-27 11:37:10,728 [salt.state       :1951][INFO    ][3134] Completed state [root] at time 11:37:10.728384 duration_in_ms=8.591
2018-12-27 11:37:10,731 [salt.state       :1780][INFO    ][3134] Running state [/root] at time 11:37:10.730988
2018-12-27 11:37:10,733 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/root]
2018-12-27 11:37:10,734 [salt.state       :300 ][INFO    ][3134] Directory /root is in the correct state
Directory /root updated
2018-12-27 11:37:10,735 [salt.state       :1951][INFO    ][3134] Completed state [/root] at time 11:37:10.735032 duration_in_ms=4.044
2018-12-27 11:37:10,736 [salt.state       :1780][INFO    ][3134] Running state [/etc/sudoers.d/90-salt-user-root] at time 11:37:10.736346
2018-12-27 11:37:10,736 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-12-27 11:37:10,737 [salt.state       :300 ][INFO    ][3134] File /etc/sudoers.d/90-salt-user-root is not present
2018-12-27 11:37:10,737 [salt.state       :1951][INFO    ][3134] Completed state [/etc/sudoers.d/90-salt-user-root] at time 11:37:10.737649 duration_in_ms=1.303
2018-12-27 11:37:10,738 [salt.state       :1780][INFO    ][3134] Running state [ubuntu] at time 11:37:10.738040
2018-12-27 11:37:10,738 [salt.state       :1813][INFO    ][3134] Executing state group.present for [ubuntu]
2018-12-27 11:37:10,738 [salt.state       :300 ][INFO    ][3134] Group ubuntu is present and up to date
2018-12-27 11:37:10,739 [salt.state       :1951][INFO    ][3134] Completed state [ubuntu] at time 11:37:10.739266 duration_in_ms=1.225
2018-12-27 11:37:10,740 [salt.state       :1780][INFO    ][3134] Running state [ubuntu] at time 11:37:10.740910
2018-12-27 11:37:10,741 [salt.state       :1813][INFO    ][3134] Executing state user.present for [ubuntu]
2018-12-27 11:37:10,746 [salt.state       :300 ][INFO    ][3134] {'passwd': 'XXX-REDACTED-XXX'}
2018-12-27 11:37:10,747 [salt.state       :1951][INFO    ][3134] Completed state [ubuntu] at time 11:37:10.746992 duration_in_ms=6.082
2018-12-27 11:37:10,749 [salt.state       :1780][INFO    ][3134] Running state [/home/ubuntu] at time 11:37:10.749704
2018-12-27 11:37:10,751 [salt.state       :1813][INFO    ][3134] Executing state file.directory for [/home/ubuntu]
2018-12-27 11:37:10,752 [salt.state       :300 ][INFO    ][3134] {'mode': '0700'}
2018-12-27 11:37:10,753 [salt.state       :1951][INFO    ][3134] Completed state [/home/ubuntu] at time 11:37:10.753208 duration_in_ms=3.504
2018-12-27 11:37:10,754 [salt.state       :1780][INFO    ][3134] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 11:37:10.754698
2018-12-27 11:37:10,755 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-12-27 11:37:10,776 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-12-27 11:37:10,793 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.77M6Gj' in directory '/root'
2018-12-27 11:37:10,824 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:10,825 [salt.state       :1951][INFO    ][3134] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 11:37:10.824914 duration_in_ms=70.216
2018-12-27 11:37:10,825 [salt.state       :1780][INFO    ][3134] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 11:37:10.825480
2018-12-27 11:37:10,825 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2018-12-27 11:37:10,849 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-12-27 11:37:10,997 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:10,999 [salt.state       :1951][INFO    ][3134] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 11:37:10.999700 duration_in_ms=174.218
2018-12-27 11:37:11,000 [salt.state       :1780][INFO    ][3134] Running state [/etc/security/limits.d/90-salt-default.conf] at time 11:37:11.000437
2018-12-27 11:37:11,000 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-12-27 11:37:11,143 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:11,143 [salt.state       :1951][INFO    ][3134] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 11:37:11.143774 duration_in_ms=143.337
2018-12-27 11:37:11,144 [salt.state       :1780][INFO    ][3134] Running state [apt-daily.timer] at time 11:37:11.144053
2018-12-27 11:37:11,144 [salt.state       :1813][INFO    ][3134] Executing state service.dead for [apt-daily.timer]
2018-12-27 11:37:11,145 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2018-12-27 11:37:11,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,213 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-12-27 11:37:11,491 [salt.state       :300 ][INFO    ][3134] {'apt-daily.timer': True}
2018-12-27 11:37:11,493 [salt.state       :1951][INFO    ][3134] Completed state [apt-daily.timer] at time 11:37:11.493055 duration_in_ms=349.001
2018-12-27 11:37:11,493 [salt.state       :1780][INFO    ][3134] Running state [autofs] at time 11:37:11.493628
2018-12-27 11:37:11,494 [salt.state       :1813][INFO    ][3134] Executing state service.disabled for [autofs]
2018-12-27 11:37:11,495 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2018-12-27 11:37:11,513 [salt.state       :300 ][INFO    ][3134] The named service autofs is not available
2018-12-27 11:37:11,514 [salt.state       :1951][INFO    ][3134] Completed state [autofs] at time 11:37:11.514354 duration_in_ms=20.725
2018-12-27 11:37:11,514 [salt.state       :1780][INFO    ][3134] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 11:37:11.514914
2018-12-27 11:37:11,515 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-12-27 11:37:11,536 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-12-27 11:37:11,709 [salt.state       :300 ][INFO    ][3134] File changed:
New file
2018-12-27 11:37:11,710 [salt.state       :1951][INFO    ][3134] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 11:37:11.710321 duration_in_ms=195.407
2018-12-27 11:37:11,713 [salt.state       :1780][INFO    ][3134] Running state [service.systemctl_reload] at time 11:37:11.713038
2018-12-27 11:37:11,713 [salt.state       :1813][INFO    ][3134] Executing state module.wait for [service.systemctl_reload]
2018-12-27 11:37:11,713 [salt.state       :300 ][INFO    ][3134] No changes made for service.systemctl_reload
2018-12-27 11:37:11,714 [salt.state       :1951][INFO    ][3134] Completed state [service.systemctl_reload] at time 11:37:11.714911 duration_in_ms=1.874
2018-12-27 11:37:11,715 [salt.state       :1780][INFO    ][3134] Running state [service.systemctl_reload] at time 11:37:11.715622
2018-12-27 11:37:11,716 [salt.state       :1813][INFO    ][3134] Executing state module.mod_watch for [service.systemctl_reload]
2018-12-27 11:37:11,717 [salt.utils.decorators:613 ][WARNING ][3134] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-12-27 11:37:11,717 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-12-27 11:37:11,858 [salt.state       :300 ][INFO    ][3134] {'ret': True}
2018-12-27 11:37:11,859 [salt.state       :1951][INFO    ][3134] Completed state [service.systemctl_reload] at time 11:37:11.859728 duration_in_ms=144.105
2018-12-27 11:37:11,861 [salt.state       :1780][INFO    ][3134] Running state [/etc/shadow] at time 11:37:11.861209
2018-12-27 11:37:11,862 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/shadow]
2018-12-27 11:37:11,864 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,867 [salt.state       :300 ][INFO    ][3134] File /etc/shadow exists with proper permissions. No changes made.
2018-12-27 11:37:11,874 [salt.state       :1951][INFO    ][3134] Completed state [/etc/shadow] at time 11:37:11.874697 duration_in_ms=13.488
2018-12-27 11:37:11,875 [salt.state       :1780][INFO    ][3134] Running state [/etc/gshadow] at time 11:37:11.875167
2018-12-27 11:37:11,875 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/gshadow]
2018-12-27 11:37:11,876 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,877 [salt.state       :300 ][INFO    ][3134] File /etc/gshadow exists with proper permissions. No changes made.
2018-12-27 11:37:11,877 [salt.state       :1951][INFO    ][3134] Completed state [/etc/gshadow] at time 11:37:11.877879 duration_in_ms=2.712
2018-12-27 11:37:11,878 [salt.state       :1780][INFO    ][3134] Running state [/etc/group-] at time 11:37:11.878899
2018-12-27 11:37:11,879 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/group-]
2018-12-27 11:37:11,880 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,880 [salt.state       :300 ][INFO    ][3134] File /etc/group- exists with proper permissions. No changes made.
2018-12-27 11:37:11,881 [salt.state       :1951][INFO    ][3134] Completed state [/etc/group-] at time 11:37:11.881206 duration_in_ms=2.307
2018-12-27 11:37:11,881 [salt.state       :1780][INFO    ][3134] Running state [/etc/shadow-] at time 11:37:11.881617
2018-12-27 11:37:11,882 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/shadow-]
2018-12-27 11:37:11,882 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,883 [salt.state       :300 ][INFO    ][3134] File /etc/shadow- exists with proper permissions. No changes made.
2018-12-27 11:37:11,884 [salt.state       :1951][INFO    ][3134] Completed state [/etc/shadow-] at time 11:37:11.884005 duration_in_ms=2.389
2018-12-27 11:37:11,885 [salt.state       :1780][INFO    ][3134] Running state [/etc/passwd-] at time 11:37:11.885017
2018-12-27 11:37:11,885 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/passwd-]
2018-12-27 11:37:11,885 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,888 [salt.state       :300 ][INFO    ][3134] File /etc/passwd- exists with proper permissions. No changes made.
2018-12-27 11:37:11,889 [salt.state       :1951][INFO    ][3134] Completed state [/etc/passwd-] at time 11:37:11.889080 duration_in_ms=4.063
2018-12-27 11:37:11,889 [salt.state       :1780][INFO    ][3134] Running state [/etc/passwd] at time 11:37:11.889481
2018-12-27 11:37:11,889 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/passwd]
2018-12-27 11:37:11,890 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,891 [salt.state       :300 ][INFO    ][3134] File /etc/passwd exists with proper permissions. No changes made.
2018-12-27 11:37:11,891 [salt.state       :1951][INFO    ][3134] Completed state [/etc/passwd] at time 11:37:11.891499 duration_in_ms=2.017
2018-12-27 11:37:11,891 [salt.state       :1780][INFO    ][3134] Running state [/etc/gshadow-] at time 11:37:11.891918
2018-12-27 11:37:11,892 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/gshadow-]
2018-12-27 11:37:11,893 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,893 [salt.state       :300 ][INFO    ][3134] File /etc/gshadow- exists with proper permissions. No changes made.
2018-12-27 11:37:11,895 [salt.state       :1951][INFO    ][3134] Completed state [/etc/gshadow-] at time 11:37:11.895138 duration_in_ms=3.219
2018-12-27 11:37:11,895 [salt.state       :1780][INFO    ][3134] Running state [/etc/group] at time 11:37:11.895587
2018-12-27 11:37:11,896 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/group]
2018-12-27 11:37:11,897 [salt.loaded.int.states.file:2298][WARNING ][3134] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-12-27 11:37:11,897 [salt.state       :300 ][INFO    ][3134] File /etc/group exists with proper permissions. No changes made.
2018-12-27 11:37:11,898 [salt.state       :1951][INFO    ][3134] Completed state [/etc/group] at time 11:37:11.898268 duration_in_ms=2.681
2018-12-27 11:37:11,899 [salt.state       :1780][INFO    ][3134] Running state [/etc/issue] at time 11:37:11.899633
2018-12-27 11:37:11,900 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/issue]
2018-12-27 11:37:11,902 [salt.state       :300 ][INFO    ][3134] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-12-27 11:37:11,907 [salt.state       :1951][INFO    ][3134] Completed state [/etc/issue] at time 11:37:11.907215 duration_in_ms=7.582
2018-12-27 11:37:11,907 [salt.state       :1780][INFO    ][3134] Running state [/etc/hostname] at time 11:37:11.907494
2018-12-27 11:37:11,907 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/hostname]
2018-12-27 11:37:12,275 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-12-27 11:37:12,294 [salt.state       :300 ][INFO    ][3134] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb02

2018-12-27 11:37:12,294 [salt.state       :1951][INFO    ][3134] Completed state [/etc/hostname] at time 11:37:12.294649 duration_in_ms=387.154
2018-12-27 11:37:12,300 [salt.state       :1780][INFO    ][3134] Running state [hostname mdb02] at time 11:37:12.299982
2018-12-27 11:37:12,300 [salt.state       :1813][INFO    ][3134] Executing state cmd.run for [hostname mdb02]
2018-12-27 11:37:12,301 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'test "$(hostname)" = "mdb02"' in directory '/root'
2018-12-27 11:37:12,321 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'hostname mdb02' in directory '/root'
2018-12-27 11:37:12,343 [salt.state       :300 ][INFO    ][3134] {'pid': 5190, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-12-27 11:37:12,346 [salt.state       :1951][INFO    ][3134] Completed state [hostname mdb02] at time 11:37:12.346219 duration_in_ms=46.235
2018-12-27 11:37:12,349 [salt.state       :1780][INFO    ][3134] Running state [mdb02] at time 11:37:12.349212
2018-12-27 11:37:12,349 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb02]
2018-12-27 11:37:12,351 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb02'}
2018-12-27 11:37:12,351 [salt.state       :1951][INFO    ][3134] Completed state [mdb02] at time 11:37:12.351466 duration_in_ms=2.253
2018-12-27 11:37:12,351 [salt.state       :1780][INFO    ][3134] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 11:37:12.351826
2018-12-27 11:37:12,352 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,377 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,377 [salt.state       :1951][INFO    ][3134] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 11:37:12.377469 duration_in_ms=25.643
2018-12-27 11:37:12,379 [salt.state       :1780][INFO    ][3134] Running state [mdb03] at time 11:37:12.379740
2018-12-27 11:37:12,380 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb03]
2018-12-27 11:37:12,382 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb03'}
2018-12-27 11:37:12,383 [salt.state       :1951][INFO    ][3134] Completed state [mdb03] at time 11:37:12.383091 duration_in_ms=3.352
2018-12-27 11:37:12,383 [salt.state       :1780][INFO    ][3134] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 11:37:12.383458
2018-12-27 11:37:12,383 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,386 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,386 [salt.state       :1951][INFO    ][3134] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 11:37:12.386484 duration_in_ms=3.026
2018-12-27 11:37:12,387 [salt.state       :1780][INFO    ][3134] Running state [mdb01] at time 11:37:12.387481
2018-12-27 11:37:12,387 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb01]
2018-12-27 11:37:12,391 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb01'}
2018-12-27 11:37:12,391 [salt.state       :1951][INFO    ][3134] Completed state [mdb01] at time 11:37:12.391442 duration_in_ms=3.961
2018-12-27 11:37:12,391 [salt.state       :1780][INFO    ][3134] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 11:37:12.391802
2018-12-27 11:37:12,392 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,393 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,394 [salt.state       :1951][INFO    ][3134] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 11:37:12.394855 duration_in_ms=3.053
2018-12-27 11:37:12,395 [salt.state       :1780][INFO    ][3134] Running state [mdb] at time 11:37:12.395205
2018-12-27 11:37:12,395 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb]
2018-12-27 11:37:12,400 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb'}
2018-12-27 11:37:12,401 [salt.state       :1951][INFO    ][3134] Completed state [mdb] at time 11:37:12.400981 duration_in_ms=5.776
2018-12-27 11:37:12,401 [salt.state       :1780][INFO    ][3134] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 11:37:12.401306
2018-12-27 11:37:12,401 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,403 [salt.state       :300 ][INFO    ][3134] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,403 [salt.state       :1951][INFO    ][3134] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 11:37:12.403868 duration_in_ms=2.561
2018-12-27 11:37:12,405 [salt.state       :1780][INFO    ][3134] Running state [cfg01] at time 11:37:12.405309
2018-12-27 11:37:12,405 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cfg01]
2018-12-27 11:37:12,408 [salt.state       :300 ][INFO    ][3134] {'host': 'cfg01'}
2018-12-27 11:37:12,409 [salt.state       :1951][INFO    ][3134] Completed state [cfg01] at time 11:37:12.409375 duration_in_ms=4.066
2018-12-27 11:37:12,409 [salt.state       :1780][INFO    ][3134] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:37:12.409763
2018-12-27 11:37:12,410 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,410 [salt.state       :300 ][INFO    ][3134] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,411 [salt.state       :1951][INFO    ][3134] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:37:12.411197 duration_in_ms=1.435
2018-12-27 11:37:12,411 [salt.state       :1780][INFO    ][3134] Running state [prx01] at time 11:37:12.411578
2018-12-27 11:37:12,411 [salt.state       :1813][INFO    ][3134] Executing state host.present for [prx01]
2018-12-27 11:37:12,413 [salt.state       :300 ][INFO    ][3134] {'host': 'prx01'}
2018-12-27 11:37:12,414 [salt.state       :1951][INFO    ][3134] Completed state [prx01] at time 11:37:12.414743 duration_in_ms=3.166
2018-12-27 11:37:12,415 [salt.state       :1780][INFO    ][3134] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 11:37:12.415079
2018-12-27 11:37:12,415 [salt.state       :1813][INFO    ][3134] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,416 [salt.state       :300 ][INFO    ][3134] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,416 [salt.state       :1951][INFO    ][3134] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 11:37:12.416748 duration_in_ms=1.669
2018-12-27 11:37:12,417 [salt.state       :1780][INFO    ][3134] Running state [kvm01] at time 11:37:12.417075
2018-12-27 11:37:12,417 [salt.state       :1813][INFO    ][3134] Executing state host.present for [kvm01]
2018-12-27 11:37:12,418 [salt.state       :300 ][INFO    ][3134] {'host': 'kvm01'}
2018-12-27 11:37:12,419 [salt.state       :1951][INFO    ][3134] Completed state [kvm01] at time 11:37:12.419023 duration_in_ms=1.947
2018-12-27 11:37:12,419 [salt.state       :1780][INFO    ][3134] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 11:37:12.419958
2018-12-27 11:37:12,420 [salt.state       :1813][INFO    ][3134] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,423 [salt.state       :300 ][INFO    ][3134] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,423 [salt.state       :1951][INFO    ][3134] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 11:37:12.423272 duration_in_ms=3.314
2018-12-27 11:37:12,423 [salt.state       :1780][INFO    ][3134] Running state [kvm03] at time 11:37:12.423604
2018-12-27 11:37:12,423 [salt.state       :1813][INFO    ][3134] Executing state host.present for [kvm03]
2018-12-27 11:37:12,425 [salt.state       :300 ][INFO    ][3134] {'host': 'kvm03'}
2018-12-27 11:37:12,425 [salt.state       :1951][INFO    ][3134] Completed state [kvm03] at time 11:37:12.425479 duration_in_ms=1.875
2018-12-27 11:37:12,425 [salt.state       :1780][INFO    ][3134] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 11:37:12.425818
2018-12-27 11:37:12,426 [salt.state       :1813][INFO    ][3134] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,427 [salt.state       :300 ][INFO    ][3134] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,427 [salt.state       :1951][INFO    ][3134] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 11:37:12.427468 duration_in_ms=1.65
2018-12-27 11:37:12,428 [salt.state       :1780][INFO    ][3134] Running state [kvm02] at time 11:37:12.428678
2018-12-27 11:37:12,428 [salt.state       :1813][INFO    ][3134] Executing state host.present for [kvm02]
2018-12-27 11:37:12,430 [salt.state       :300 ][INFO    ][3134] {'host': 'kvm02'}
2018-12-27 11:37:12,430 [salt.state       :1951][INFO    ][3134] Completed state [kvm02] at time 11:37:12.430933 duration_in_ms=2.255
2018-12-27 11:37:12,431 [salt.state       :1780][INFO    ][3134] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 11:37:12.431571
2018-12-27 11:37:12,431 [salt.state       :1813][INFO    ][3134] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,434 [salt.state       :300 ][INFO    ][3134] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,434 [salt.state       :1951][INFO    ][3134] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 11:37:12.434852 duration_in_ms=3.281
2018-12-27 11:37:12,435 [salt.state       :1780][INFO    ][3134] Running state [dbs] at time 11:37:12.435180
2018-12-27 11:37:12,435 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs]
2018-12-27 11:37:12,437 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs'}
2018-12-27 11:37:12,438 [salt.state       :1951][INFO    ][3134] Completed state [dbs] at time 11:37:12.438510 duration_in_ms=3.33
2018-12-27 11:37:12,438 [salt.state       :1780][INFO    ][3134] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 11:37:12.438866
2018-12-27 11:37:12,439 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,440 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,441 [salt.state       :1951][INFO    ][3134] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 11:37:12.441070 duration_in_ms=2.205
2018-12-27 11:37:12,441 [salt.state       :1780][INFO    ][3134] Running state [prx] at time 11:37:12.441407
2018-12-27 11:37:12,441 [salt.state       :1813][INFO    ][3134] Executing state host.present for [prx]
2018-12-27 11:37:12,442 [salt.state       :300 ][INFO    ][3134] {'host': 'prx'}
2018-12-27 11:37:12,442 [salt.state       :1951][INFO    ][3134] Completed state [prx] at time 11:37:12.442834 duration_in_ms=1.427
2018-12-27 11:37:12,443 [salt.state       :1780][INFO    ][3134] Running state [prx.mcp-ovs-dpdk-ha.local] at time 11:37:12.443187
2018-12-27 11:37:12,443 [salt.state       :1813][INFO    ][3134] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,445 [salt.state       :300 ][INFO    ][3134] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,445 [salt.state       :1951][INFO    ][3134] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 11:37:12.445662 duration_in_ms=2.475
2018-12-27 11:37:12,446 [salt.state       :1780][INFO    ][3134] Running state [prx02] at time 11:37:12.446622
2018-12-27 11:37:12,447 [salt.state       :1813][INFO    ][3134] Executing state host.present for [prx02]
2018-12-27 11:37:12,449 [salt.state       :300 ][INFO    ][3134] {'host': 'prx02'}
2018-12-27 11:37:12,449 [salt.state       :1951][INFO    ][3134] Completed state [prx02] at time 11:37:12.449172 duration_in_ms=2.55
2018-12-27 11:37:12,449 [salt.state       :1780][INFO    ][3134] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 11:37:12.449508
2018-12-27 11:37:12,449 [salt.state       :1813][INFO    ][3134] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,451 [salt.state       :300 ][INFO    ][3134] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,452 [salt.state       :1951][INFO    ][3134] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 11:37:12.452025 duration_in_ms=2.517
2018-12-27 11:37:12,452 [salt.state       :1780][INFO    ][3134] Running state [msg02] at time 11:37:12.452698
2018-12-27 11:37:12,452 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg02]
2018-12-27 11:37:12,454 [salt.state       :300 ][INFO    ][3134] {'host': 'msg02'}
2018-12-27 11:37:12,454 [salt.state       :1951][INFO    ][3134] Completed state [msg02] at time 11:37:12.454544 duration_in_ms=1.846
2018-12-27 11:37:12,454 [salt.state       :1780][INFO    ][3134] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 11:37:12.454896
2018-12-27 11:37:12,455 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,456 [salt.state       :300 ][INFO    ][3134] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,456 [salt.state       :1951][INFO    ][3134] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 11:37:12.456766 duration_in_ms=1.87
2018-12-27 11:37:12,457 [salt.state       :1780][INFO    ][3134] Running state [msg03] at time 11:37:12.457099
2018-12-27 11:37:12,457 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg03]
2018-12-27 11:37:12,459 [salt.state       :300 ][INFO    ][3134] {'host': 'msg03'}
2018-12-27 11:37:12,459 [salt.state       :1951][INFO    ][3134] Completed state [msg03] at time 11:37:12.459574 duration_in_ms=2.474
2018-12-27 11:37:12,460 [salt.state       :1780][INFO    ][3134] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 11:37:12.460733
2018-12-27 11:37:12,460 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,461 [salt.state       :300 ][INFO    ][3134] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,462 [salt.state       :1951][INFO    ][3134] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 11:37:12.462047 duration_in_ms=1.314
2018-12-27 11:37:12,462 [salt.state       :1780][INFO    ][3134] Running state [msg01] at time 11:37:12.462768
2018-12-27 11:37:12,463 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg01]
2018-12-27 11:37:12,463 [salt.state       :300 ][INFO    ][3134] {'host': 'msg01'}
2018-12-27 11:37:12,464 [salt.state       :1951][INFO    ][3134] Completed state [msg01] at time 11:37:12.464118 duration_in_ms=1.35
2018-12-27 11:37:12,464 [salt.state       :1780][INFO    ][3134] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 11:37:12.464755
2018-12-27 11:37:12,464 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,465 [salt.state       :300 ][INFO    ][3134] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,466 [salt.state       :1951][INFO    ][3134] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 11:37:12.466034 duration_in_ms=1.272
2018-12-27 11:37:12,466 [salt.state       :1780][INFO    ][3134] Running state [msg] at time 11:37:12.466402
2018-12-27 11:37:12,466 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg]
2018-12-27 11:37:12,468 [salt.state       :300 ][INFO    ][3134] {'host': 'msg'}
2018-12-27 11:37:12,468 [salt.state       :1951][INFO    ][3134] Completed state [msg] at time 11:37:12.468616 duration_in_ms=2.214
2018-12-27 11:37:12,468 [salt.state       :1780][INFO    ][3134] Running state [msg.mcp-ovs-dpdk-ha.local] at time 11:37:12.468951
2018-12-27 11:37:12,469 [salt.state       :1813][INFO    ][3134] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,470 [salt.state       :300 ][INFO    ][3134] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,471 [salt.state       :1951][INFO    ][3134] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 11:37:12.471106 duration_in_ms=2.156
2018-12-27 11:37:12,471 [salt.state       :1780][INFO    ][3134] Running state [cfg01] at time 11:37:12.471762
2018-12-27 11:37:12,472 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cfg01]
2018-12-27 11:37:12,473 [salt.state       :300 ][INFO    ][3134] Host cfg01 (192.168.10.11) already present
2018-12-27 11:37:12,473 [salt.state       :1951][INFO    ][3134] Completed state [cfg01] at time 11:37:12.473495 duration_in_ms=1.732
2018-12-27 11:37:12,473 [salt.state       :1780][INFO    ][3134] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:37:12.473822
2018-12-27 11:37:12,474 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,474 [salt.state       :300 ][INFO    ][3134] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2018-12-27 11:37:12,474 [salt.state       :1951][INFO    ][3134] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 11:37:12.474630 duration_in_ms=0.808
2018-12-27 11:37:12,474 [salt.state       :1780][INFO    ][3134] Running state [cmp002] at time 11:37:12.474947
2018-12-27 11:37:12,475 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cmp002]
2018-12-27 11:37:12,476 [salt.state       :300 ][INFO    ][3134] {'host': 'cmp002'}
2018-12-27 11:37:12,476 [salt.state       :1951][INFO    ][3134] Completed state [cmp002] at time 11:37:12.476361 duration_in_ms=1.413
2018-12-27 11:37:12,476 [salt.state       :1780][INFO    ][3134] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 11:37:12.476688
2018-12-27 11:37:12,476 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,477 [salt.state       :300 ][INFO    ][3134] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,478 [salt.state       :1951][INFO    ][3134] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 11:37:12.477970 duration_in_ms=1.282
2018-12-27 11:37:12,478 [salt.state       :1780][INFO    ][3134] Running state [cmp001] at time 11:37:12.478345
2018-12-27 11:37:12,478 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cmp001]
2018-12-27 11:37:12,480 [salt.state       :300 ][INFO    ][3134] {'host': 'cmp001'}
2018-12-27 11:37:12,480 [salt.state       :1951][INFO    ][3134] Completed state [cmp001] at time 11:37:12.480550 duration_in_ms=2.205
2018-12-27 11:37:12,480 [salt.state       :1780][INFO    ][3134] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 11:37:12.480905
2018-12-27 11:37:12,481 [salt.state       :1813][INFO    ][3134] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,482 [salt.state       :300 ][INFO    ][3134] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,482 [salt.state       :1951][INFO    ][3134] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 11:37:12.482905 duration_in_ms=2.0
2018-12-27 11:37:12,483 [salt.state       :1780][INFO    ][3134] Running state [dbs01] at time 11:37:12.483252
2018-12-27 11:37:12,483 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs01]
2018-12-27 11:37:12,485 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs01'}
2018-12-27 11:37:12,485 [salt.state       :1951][INFO    ][3134] Completed state [dbs01] at time 11:37:12.485881 duration_in_ms=2.629
2018-12-27 11:37:12,486 [salt.state       :1780][INFO    ][3134] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 11:37:12.486284
2018-12-27 11:37:12,486 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,487 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,487 [salt.state       :1951][INFO    ][3134] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 11:37:12.487580 duration_in_ms=1.296
2018-12-27 11:37:12,488 [salt.state       :1780][INFO    ][3134] Running state [dbs02] at time 11:37:12.487894
2018-12-27 11:37:12,488 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs02]
2018-12-27 11:37:12,489 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs02'}
2018-12-27 11:37:12,489 [salt.state       :1951][INFO    ][3134] Completed state [dbs02] at time 11:37:12.489556 duration_in_ms=1.663
2018-12-27 11:37:12,489 [salt.state       :1780][INFO    ][3134] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 11:37:12.489931
2018-12-27 11:37:12,490 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,498 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,498 [salt.state       :1951][INFO    ][3134] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 11:37:12.498361 duration_in_ms=8.429
2018-12-27 11:37:12,498 [salt.state       :1780][INFO    ][3134] Running state [dbs03] at time 11:37:12.498724
2018-12-27 11:37:12,498 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs03]
2018-12-27 11:37:12,500 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs03'}
2018-12-27 11:37:12,501 [salt.state       :1951][INFO    ][3134] Completed state [dbs03] at time 11:37:12.501165 duration_in_ms=2.441
2018-12-27 11:37:12,501 [salt.state       :1780][INFO    ][3134] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 11:37:12.501497
2018-12-27 11:37:12,501 [salt.state       :1813][INFO    ][3134] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,505 [salt.state       :300 ][INFO    ][3134] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,505 [salt.state       :1951][INFO    ][3134] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 11:37:12.505783 duration_in_ms=4.286
2018-12-27 11:37:12,506 [salt.state       :1780][INFO    ][3134] Running state [mas01] at time 11:37:12.506222
2018-12-27 11:37:12,506 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mas01]
2018-12-27 11:37:12,508 [salt.state       :300 ][INFO    ][3134] {'host': 'mas01'}
2018-12-27 11:37:12,508 [salt.state       :1951][INFO    ][3134] Completed state [mas01] at time 11:37:12.508267 duration_in_ms=2.045
2018-12-27 11:37:12,508 [salt.state       :1780][INFO    ][3134] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 11:37:12.508629
2018-12-27 11:37:12,508 [salt.state       :1813][INFO    ][3134] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,509 [salt.state       :300 ][INFO    ][3134] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,510 [salt.state       :1951][INFO    ][3134] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 11:37:12.510616 duration_in_ms=1.987
2018-12-27 11:37:12,511 [salt.state       :1780][INFO    ][3134] Running state [ctl02] at time 11:37:12.511008
2018-12-27 11:37:12,511 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl02]
2018-12-27 11:37:12,514 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl02'}
2018-12-27 11:37:12,514 [salt.state       :1951][INFO    ][3134] Completed state [ctl02] at time 11:37:12.514321 duration_in_ms=3.313
2018-12-27 11:37:12,514 [salt.state       :1780][INFO    ][3134] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 11:37:12.514684
2018-12-27 11:37:12,514 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,516 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,517 [salt.state       :1951][INFO    ][3134] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 11:37:12.517606 duration_in_ms=2.922
2018-12-27 11:37:12,518 [salt.state       :1780][INFO    ][3134] Running state [ctl03] at time 11:37:12.517996
2018-12-27 11:37:12,518 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl03]
2018-12-27 11:37:12,520 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl03'}
2018-12-27 11:37:12,520 [salt.state       :1951][INFO    ][3134] Completed state [ctl03] at time 11:37:12.520717 duration_in_ms=2.722
2018-12-27 11:37:12,521 [salt.state       :1780][INFO    ][3134] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 11:37:12.521067
2018-12-27 11:37:12,521 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,522 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,522 [salt.state       :1951][INFO    ][3134] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 11:37:12.522474 duration_in_ms=1.407
2018-12-27 11:37:12,522 [salt.state       :1780][INFO    ][3134] Running state [ctl01] at time 11:37:12.522831
2018-12-27 11:37:12,523 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl01]
2018-12-27 11:37:12,524 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl01'}
2018-12-27 11:37:12,525 [salt.state       :1951][INFO    ][3134] Completed state [ctl01] at time 11:37:12.525002 duration_in_ms=2.172
2018-12-27 11:37:12,525 [salt.state       :1780][INFO    ][3134] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 11:37:12.525341
2018-12-27 11:37:12,525 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,527 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,527 [salt.state       :1951][INFO    ][3134] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 11:37:12.527357 duration_in_ms=2.016
2018-12-27 11:37:12,527 [salt.state       :1780][INFO    ][3134] Running state [ctl] at time 11:37:12.527697
2018-12-27 11:37:12,527 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl]
2018-12-27 11:37:12,529 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl'}
2018-12-27 11:37:12,529 [salt.state       :1951][INFO    ][3134] Completed state [ctl] at time 11:37:12.529392 duration_in_ms=1.695
2018-12-27 11:37:12,529 [salt.state       :1780][INFO    ][3134] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 11:37:12.529723
2018-12-27 11:37:12,529 [salt.state       :1813][INFO    ][3134] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2018-12-27 11:37:12,531 [salt.state       :300 ][INFO    ][3134] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2018-12-27 11:37:12,532 [salt.state       :1951][INFO    ][3134] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 11:37:12.532057 duration_in_ms=2.333
2018-12-27 11:37:12,532 [salt.state       :1780][INFO    ][3134] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 11:37:12.532320
2018-12-27 11:37:12,532 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-12-27 11:37:12,533 [salt.state       :300 ][INFO    ][3134] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-12-27 11:37:12,533 [salt.state       :1951][INFO    ][3134] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 11:37:12.533379 duration_in_ms=1.059
2018-12-27 11:37:12,534 [salt.state       :1780][INFO    ][3134] Running state [ens3] at time 11:37:12.534139
2018-12-27 11:37:12,534 [salt.state       :1813][INFO    ][3134] Executing state network.managed for [ens3]
2018-12-27 11:37:12,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['ifup', 'ens3'] in directory '/root'
2018-12-27 11:37:12,910 [salt.minion      :1308][INFO    ][3045] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227113712895391
2018-12-27 11:37:12,940 [salt.minion      :1432][INFO    ][5257] Starting a new job with PID 5257
2018-12-27 11:37:12,960 [salt.minion      :1711][INFO    ][5257] Returning information for job: 20181227113712895391
2018-12-27 11:37:13,665 [salt.state       :300 ][INFO    ][3134] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-12-27 11:37:13,668 [salt.state       :1951][INFO    ][3134] Completed state [ens3] at time 11:37:13.668056 duration_in_ms=1133.917
2018-12-27 11:37:13,669 [salt.state       :1780][INFO    ][3134] Running state [ens2] at time 11:37:13.669053
2018-12-27 11:37:13,669 [salt.state       :1813][INFO    ][3134] Executing state network.managed for [ens2]
2018-12-27 11:37:13,702 [salt.state       :300 ][INFO    ][3134] {'interface': 'Added network interface.'}
2018-12-27 11:37:13,703 [salt.state       :1951][INFO    ][3134] Completed state [ens2] at time 11:37:13.703070 duration_in_ms=34.017
2018-12-27 11:37:13,703 [salt.state       :1780][INFO    ][3134] Running state [linux_system_network] at time 11:37:13.703699
2018-12-27 11:37:13,704 [salt.state       :1813][INFO    ][3134] Executing state network.system for [linux_system_network]
2018-12-27 11:37:13,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-12-27 11:37:13,729 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-12-27 11:37:13,759 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-12-27 11:37:13,785 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-12-27 11:37:14,299 [salt.loaded.int.module.debian_ip:1964][WARNING ][3134] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-12-27 11:37:14,300 [salt.state       :300 ][INFO    ][3134] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb02\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2018-12-27 11:37:14,300 [salt.state       :1951][INFO    ][3134] Completed state [linux_system_network] at time 11:37:14.300860 duration_in_ms=597.16
2018-12-27 11:37:14,301 [salt.state       :1780][INFO    ][3134] Running state [/etc/profile.d/proxy.sh] at time 11:37:14.301225
2018-12-27 11:37:14,301 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-12-27 11:37:14,309 [salt.state       :300 ][INFO    ][3134] File /etc/profile.d/proxy.sh is not present
2018-12-27 11:37:14,311 [salt.state       :1951][INFO    ][3134] Completed state [/etc/profile.d/proxy.sh] at time 11:37:14.311184 duration_in_ms=9.959
2018-12-27 11:37:14,311 [salt.state       :1780][INFO    ][3134] Running state [/etc/apt/apt.conf.d/95proxies] at time 11:37:14.311634
2018-12-27 11:37:14,312 [salt.state       :1813][INFO    ][3134] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-12-27 11:37:14,312 [salt.state       :300 ][INFO    ][3134] File /etc/apt/apt.conf.d/95proxies is not present
2018-12-27 11:37:14,313 [salt.state       :1951][INFO    ][3134] Completed state [/etc/apt/apt.conf.d/95proxies] at time 11:37:14.313232 duration_in_ms=1.597
2018-12-27 11:37:14,314 [salt.state       :1780][INFO    ][3134] Running state [/dev/shm] at time 11:37:14.314894
2018-12-27 11:37:14,316 [salt.state       :1813][INFO    ][3134] Executing state mount.mounted for [/dev/shm]
2018-12-27 11:37:14,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'mount -l' in directory '/root'
2018-12-27 11:37:14,343 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'blkid' in directory '/root'
2018-12-27 11:37:14,364 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'mount -l' in directory '/root'
2018-12-27 11:37:14,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-12-27 11:37:14,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'mount -l' in directory '/root'
2018-12-27 11:37:14,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-12-27 11:37:14,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'mount -l' in directory '/root'
2018-12-27 11:37:14,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'umount /dev/shm' in directory '/root'
2018-12-27 11:37:14,465 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3134] Command '['umount', '/dev/shm']' failed with return code: 32
2018-12-27 11:37:14,465 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3134] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2018-12-27 11:37:14,467 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3134] retcode: 32
2018-12-27 11:37:14,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'mount -l' in directory '/root'
2018-12-27 11:37:14,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command 'blkid' in directory '/root'
2018-12-27 11:37:14,505 [salt.state       :300 ][INFO    ][3134] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2018-12-27 11:37:14,506 [salt.state       :1951][INFO    ][3134] Completed state [/dev/shm] at time 11:37:14.506734 duration_in_ms=191.839
2018-12-27 11:37:14,509 [salt.state       :1780][INFO    ][3134] Running state [ntp] at time 11:37:14.509349
2018-12-27 11:37:14,510 [salt.state       :1813][INFO    ][3134] Executing state pkg.installed for [ntp]
2018-12-27 11:37:14,797 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:37:14,828 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-12-27 11:37:19,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:37:19,055 [salt.state       :300 ][INFO    ][3134] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-12-27 11:37:19,080 [salt.state       :915 ][INFO    ][3134] Loading fresh modules for state activity
2018-12-27 11:37:19,125 [salt.state       :1951][INFO    ][3134] Completed state [ntp] at time 11:37:19.125499 duration_in_ms=4616.149
2018-12-27 11:37:19,132 [salt.state       :1780][INFO    ][3134] Running state [/etc/ntp.conf] at time 11:37:19.132102
2018-12-27 11:37:19,133 [salt.state       :1813][INFO    ][3134] Executing state file.managed for [/etc/ntp.conf]
2018-12-27 11:37:19,160 [salt.fileclient  :1219][INFO    ][3134] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-12-27 11:37:19,239 [salt.state       :300 ][INFO    ][3134] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-12-27 11:37:19,239 [salt.state       :1951][INFO    ][3134] Completed state [/etc/ntp.conf] at time 11:37:19.239858 duration_in_ms=107.756
2018-12-27 11:37:19,782 [salt.state       :1780][INFO    ][3134] Running state [ntp] at time 11:37:19.782886
2018-12-27 11:37:19,783 [salt.state       :1813][INFO    ][3134] Executing state service.running for [ntp]
2018-12-27 11:37:19,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-12-27 11:37:19,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-12-27 11:37:19,819 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-12-27 11:37:19,835 [salt.state       :300 ][INFO    ][3134] The service ntp is already running
2018-12-27 11:37:19,835 [salt.state       :1951][INFO    ][3134] Completed state [ntp] at time 11:37:19.835809 duration_in_ms=52.923
2018-12-27 11:37:19,836 [salt.state       :1780][INFO    ][3134] Running state [ntp] at time 11:37:19.836074
2018-12-27 11:37:19,836 [salt.state       :1813][INFO    ][3134] Executing state service.mod_watch for [ntp]
2018-12-27 11:37:19,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-12-27 11:37:19,851 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3134] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-12-27 11:37:19,937 [salt.state       :300 ][INFO    ][3134] {'ntp': True}
2018-12-27 11:37:19,937 [salt.state       :1951][INFO    ][3134] Completed state [ntp] at time 11:37:19.937592 duration_in_ms=101.518
2018-12-27 11:37:19,947 [salt.minion      :1711][INFO    ][3134] Returning information for job: 20181227113632521419
2018-12-27 11:37:24,971 [salt.minion      :1308][INFO    ][3045] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181227113724957306
2018-12-27 11:37:25,005 [salt.minion      :1432][INFO    ][6378] Starting a new job with PID 6378
2018-12-27 11:37:25,030 [salt.minion      :1711][INFO    ][6378] Returning information for job: 20181227113724957306
2018-12-27 11:37:25,573 [salt.minion      :1308][INFO    ][3045] User sudo_ubuntu Executing command system.reboot with jid 20181227113725559483
2018-12-27 11:37:25,598 [salt.minion      :1432][INFO    ][6383] Starting a new job with PID 6383
2018-12-27 11:37:25,611 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6383] Executing command ['shutdown', '-r', 'now'] in directory '/root'
2018-12-27 11:37:25,783 [salt.utils.parsers:1051][WARNING ][3045] Minion received a SIGTERM. Exiting.
2018-12-27 11:37:25,783 [salt.cli.daemons :82  ][INFO    ][3045] Shutting down the Salt Minion
2018-12-27 11:37:26,745 [salt.minion      :1711][INFO    ][6383] Returning information for job: 20181227113725559483
2018-12-27 11:37:51,681 [salt.cli.daemons :293 ][INFO    ][1494] Setting up the Salt Minion "mdb02.mcp-ovs-dpdk-ha.local"
2018-12-27 11:37:52,365 [salt.cli.daemons :82  ][INFO    ][1494] Starting up the Salt Minion
2018-12-27 11:37:52,366 [salt.utils.event :1017][INFO    ][1494] Starting pull socket on /var/run/salt/minion/minion_event_7cf34547b8_pull.ipc
2018-12-27 11:37:54,423 [salt.minion      :976 ][INFO    ][1494] Creating minion process manager
2018-12-27 11:37:55,859 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1494] Executing command ['date', '+%z'] in directory '/root'
2018-12-27 11:37:55,897 [salt.utils.schedule:568 ][INFO    ][1494] Updating job settings for scheduled job: __mine_interval
2018-12-27 11:37:55,899 [salt.minion      :1108][INFO    ][1494] Added mine.update to scheduler
2018-12-27 11:37:55,906 [salt.minion      :1975][INFO    ][1494] Minion is starting as user 'root'
2018-12-27 11:37:55,921 [salt.minion      :2336][INFO    ][1494] Minion is ready to receive requests!
2018-12-27 11:37:56,909 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227113756170548
2018-12-27 11:37:56,930 [salt.minion      :1432][INFO    ][1620] Starting a new job with PID 1620
2018-12-27 11:37:57,037 [salt.minion      :1711][INFO    ][1620] Returning information for job: 20181227113756170548
2018-12-27 11:38:17,504 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command test.ping with jid 20181227113816759299
2018-12-27 11:38:17,533 [salt.minion      :1432][INFO    ][1625] Starting a new job with PID 1625
2018-12-27 11:38:17,614 [salt.minion      :1711][INFO    ][1625] Returning information for job: 20181227113816759299
2018-12-27 11:38:18,174 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command pkg.upgrade with jid 20181227113817428632
2018-12-27 11:38:18,195 [salt.minion      :1432][INFO    ][1630] Starting a new job with PID 1630
2018-12-27 11:38:18,830 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1630] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:38:19,537 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1630] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-12-27 11:38:28,259 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227113827518419
2018-12-27 11:38:28,281 [salt.minion      :1432][INFO    ][1886] Starting a new job with PID 1886
2018-12-27 11:38:28,310 [salt.minion      :1711][INFO    ][1886] Returning information for job: 20181227113827518419
2018-12-27 11:38:38,318 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227113837573418
2018-12-27 11:38:38,341 [salt.minion      :1432][INFO    ][2568] Starting a new job with PID 2568
2018-12-27 11:38:38,369 [salt.minion      :1711][INFO    ][2568] Returning information for job: 20181227113837573418
2018-12-27 11:38:46,859 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][1630] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:38:46,897 [salt.minion      :1711][INFO    ][1630] Returning information for job: 20181227113817428632
2018-12-27 11:39:16,207 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command test.ping with jid 20181227113915468825
2018-12-27 11:39:16,236 [salt.minion      :1432][INFO    ][2869] Starting a new job with PID 2869
2018-12-27 11:39:16,269 [salt.minion      :1711][INFO    ][2869] Returning information for job: 20181227113915468825
2018-12-27 11:41:52,493 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227114152482713
2018-12-27 11:41:52,515 [salt.minion      :1432][INFO    ][2874] Starting a new job with PID 2874
2018-12-27 11:41:58,226 [salt.state       :915 ][INFO    ][2874] Loading fresh modules for state activity
2018-12-27 11:41:58,285 [salt.fileclient  :1219][INFO    ][2874] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-12-27 11:41:58,320 [salt.fileclient  :1219][INFO    ][2874] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-12-27 11:41:59,658 [salt.state       :1780][INFO    ][2874] Running state [keepalived] at time 11:41:59.658576
2018-12-27 11:41:59,659 [salt.state       :1813][INFO    ][2874] Executing state pkg.installed for [keepalived]
2018-12-27 11:41:59,661 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:41:59,976 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-12-27 11:42:00,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 11:42:02,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:42:02,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-12-27 11:42:02,556 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227114202540714
2018-12-27 11:42:02,567 [salt.minion      :1432][INFO    ][3219] Starting a new job with PID 3219
2018-12-27 11:42:02,581 [salt.minion      :1711][INFO    ][3219] Returning information for job: 20181227114202540714
2018-12-27 11:42:06,155 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:42:06,202 [salt.state       :300 ][INFO    ][2874] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.2.24-1ubuntu0.16.04.1'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-12-27 11:42:06,224 [salt.state       :915 ][INFO    ][2874] Loading fresh modules for state activity
2018-12-27 11:42:06,265 [salt.state       :1951][INFO    ][2874] Completed state [keepalived] at time 11:42:06.265240 duration_in_ms=6606.662
2018-12-27 11:42:06,278 [salt.state       :1780][INFO    ][2874] Running state [lsof] at time 11:42:06.278444
2018-12-27 11:42:06,279 [salt.state       :1813][INFO    ][2874] Executing state pkg.installed for [lsof]
2018-12-27 11:42:06,854 [salt.state       :300 ][INFO    ][2874] All specified packages are already installed
2018-12-27 11:42:06,855 [salt.state       :1951][INFO    ][2874] Completed state [lsof] at time 11:42:06.855130 duration_in_ms=576.686
2018-12-27 11:42:06,859 [salt.state       :1780][INFO    ][2874] Running state [/etc/keepalived/keepalived.conf] at time 11:42:06.859688
2018-12-27 11:42:06,860 [salt.state       :1813][INFO    ][2874] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-12-27 11:42:06,894 [salt.fileclient  :1219][INFO    ][2874] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-12-27 11:42:06,953 [salt.state       :300 ][INFO    ][2874] File changed:
New file
2018-12-27 11:42:06,953 [salt.state       :1951][INFO    ][2874] Completed state [/etc/keepalived/keepalived.conf] at time 11:42:06.953779 duration_in_ms=94.091
2018-12-27 11:42:06,955 [salt.state       :1780][INFO    ][2874] Running state [keepalived] at time 11:42:06.955541
2018-12-27 11:42:06,955 [salt.state       :1813][INFO    ][2874] Executing state service.running for [keepalived]
2018-12-27 11:42:06,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-12-27 11:42:06,986 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-12-27 11:42:07,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-12-27 11:42:07,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-12-27 11:42:07,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-12-27 11:42:07,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-12-27 11:42:07,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2874] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-12-27 11:42:07,168 [salt.state       :300 ][INFO    ][2874] {'keepalived': True}
2018-12-27 11:42:07,169 [salt.state       :1951][INFO    ][2874] Completed state [keepalived] at time 11:42:07.169077 duration_in_ms=213.534
2018-12-27 11:42:07,170 [salt.minion      :1711][INFO    ][2874] Returning information for job: 20181227114152482713
2018-12-27 11:42:17,274 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command pillar.get with jid 20181227114217267089
2018-12-27 11:42:17,305 [salt.minion      :1432][INFO    ][4206] Starting a new job with PID 4206
2018-12-27 11:42:17,318 [salt.minion      :1711][INFO    ][4206] Returning information for job: 20181227114217267089
2018-12-27 11:52:13,669 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227115213648193
2018-12-27 11:52:13,691 [salt.minion      :1432][INFO    ][4211] Starting a new job with PID 4211
2018-12-27 11:52:19,626 [salt.state       :915 ][INFO    ][4211] Loading fresh modules for state activity
2018-12-27 11:52:19,670 [salt.fileclient  :1219][INFO    ][4211] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-12-27 11:52:19,701 [salt.fileclient  :1219][INFO    ][4211] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-12-27 11:52:19,727 [salt.fileclient  :1219][INFO    ][4211] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-12-27 11:52:20,439 [salt.state       :1780][INFO    ][4211] Running state [memcached] at time 11:52:20.439259
2018-12-27 11:52:20,440 [salt.state       :1813][INFO    ][4211] Executing state pkg.installed for [memcached]
2018-12-27 11:52:20,441 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:52:20,787 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-12-27 11:52:20,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 11:52:22,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:52:22,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-12-27 11:52:23,719 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227115223691427
2018-12-27 11:52:23,740 [salt.minion      :1432][INFO    ][4638] Starting a new job with PID 4638
2018-12-27 11:52:23,756 [salt.minion      :1711][INFO    ][4638] Returning information for job: 20181227115223691427
2018-12-27 11:52:25,974 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:52:26,014 [salt.state       :300 ][INFO    ][4211] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-12-27 11:52:26,036 [salt.state       :915 ][INFO    ][4211] Loading fresh modules for state activity
2018-12-27 11:52:26,072 [salt.state       :1951][INFO    ][4211] Completed state [memcached] at time 11:52:26.072054 duration_in_ms=5632.795
2018-12-27 11:52:26,078 [salt.state       :1780][INFO    ][4211] Running state [python-memcache] at time 11:52:26.078270
2018-12-27 11:52:26,078 [salt.state       :1813][INFO    ][4211] Executing state pkg.installed for [python-memcache]
2018-12-27 11:52:26,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:52:26,761 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-12-27 11:52:28,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:52:28,591 [salt.state       :300 ][INFO    ][4211] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-12-27 11:52:28,611 [salt.state       :915 ][INFO    ][4211] Loading fresh modules for state activity
2018-12-27 11:52:28,647 [salt.state       :1951][INFO    ][4211] Completed state [python-memcache] at time 11:52:28.646963 duration_in_ms=2568.686
2018-12-27 11:52:28,651 [salt.state       :1780][INFO    ][4211] Running state [/etc/memcached.conf] at time 11:52:28.651478
2018-12-27 11:52:28,651 [salt.state       :1813][INFO    ][4211] Executing state file.managed for [/etc/memcached.conf]
2018-12-27 11:52:28,681 [salt.fileclient  :1219][INFO    ][4211] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-12-27 11:52:28,719 [salt.state       :300 ][INFO    ][4211] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-12-27 11:52:28,727 [salt.state       :1951][INFO    ][4211] Completed state [/etc/memcached.conf] at time 11:52:28.727910 duration_in_ms=76.432
2018-12-27 11:52:29,211 [salt.state       :1780][INFO    ][4211] Running state [memcached] at time 11:52:29.211214
2018-12-27 11:52:29,211 [salt.state       :1813][INFO    ][4211] Executing state service.running for [memcached]
2018-12-27 11:52:29,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-12-27 11:52:29,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-12-27 11:52:29,250 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-12-27 11:52:29,273 [salt.state       :300 ][INFO    ][4211] The service memcached is already running
2018-12-27 11:52:29,273 [salt.state       :1951][INFO    ][4211] Completed state [memcached] at time 11:52:29.273715 duration_in_ms=62.5
2018-12-27 11:52:29,274 [salt.state       :1780][INFO    ][4211] Running state [memcached] at time 11:52:29.273965
2018-12-27 11:52:29,274 [salt.state       :1813][INFO    ][4211] Executing state service.mod_watch for [memcached]
2018-12-27 11:52:29,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-12-27 11:52:29,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4211] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-12-27 11:52:29,333 [salt.state       :300 ][INFO    ][4211] {'memcached': True}
2018-12-27 11:52:29,334 [salt.state       :1951][INFO    ][4211] Completed state [memcached] at time 11:52:29.334785 duration_in_ms=60.819
2018-12-27 11:52:29,337 [salt.minion      :1711][INFO    ][4211] Returning information for job: 20181227115213648193
2018-12-27 11:52:30,695 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227115230674652
2018-12-27 11:52:30,719 [salt.minion      :1432][INFO    ][5172] Starting a new job with PID 5172
2018-12-27 11:52:31,947 [salt.state       :915 ][INFO    ][5172] Loading fresh modules for state activity
2018-12-27 11:52:32,010 [salt.fileclient  :1219][INFO    ][5172] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-12-27 11:52:32,042 [salt.fileclient  :1219][INFO    ][5172] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-12-27 11:52:32,772 [salt.state       :1780][INFO    ][5172] Running state [haproxy] at time 11:52:32.772396
2018-12-27 11:52:32,782 [salt.state       :1813][INFO    ][5172] Executing state pkg.installed for [haproxy]
2018-12-27 11:52:32,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:52:33,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-12-27 11:52:33,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 11:52:35,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:52:35,197 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-12-27 11:52:39,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:52:39,298 [salt.state       :300 ][INFO    ][5172] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-12-27 11:52:39,318 [salt.state       :915 ][INFO    ][5172] Loading fresh modules for state activity
2018-12-27 11:52:39,358 [salt.state       :1951][INFO    ][5172] Completed state [haproxy] at time 11:52:39.358514 duration_in_ms=6586.119
2018-12-27 11:52:39,363 [salt.state       :1780][INFO    ][5172] Running state [/etc/default/haproxy] at time 11:52:39.363401
2018-12-27 11:52:39,363 [salt.state       :1813][INFO    ][5172] Executing state file.managed for [/etc/default/haproxy]
2018-12-27 11:52:39,403 [salt.fileclient  :1219][INFO    ][5172] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-12-27 11:52:39,407 [salt.state       :300 ][INFO    ][5172] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-12-27 11:52:39,407 [salt.state       :1951][INFO    ][5172] Completed state [/etc/default/haproxy] at time 11:52:39.407771 duration_in_ms=44.369
2018-12-27 11:52:39,408 [salt.state       :1780][INFO    ][5172] Running state [/etc/haproxy/haproxy.cfg] at time 11:52:39.408085
2018-12-27 11:52:39,408 [salt.state       :1813][INFO    ][5172] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-12-27 11:52:39,431 [salt.fileclient  :1219][INFO    ][5172] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-12-27 11:52:39,626 [salt.state       :300 ][INFO    ][5172] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-12-27 11:52:39,634 [salt.state       :1951][INFO    ][5172] Completed state [/etc/haproxy/haproxy.cfg] at time 11:52:39.634926 duration_in_ms=226.84
2018-12-27 11:52:39,635 [salt.state       :1780][INFO    ][5172] Running state [/etc/haproxy/ssl] at time 11:52:39.635322
2018-12-27 11:52:39,635 [salt.state       :1813][INFO    ][5172] Executing state file.directory for [/etc/haproxy/ssl]
2018-12-27 11:52:39,637 [salt.state       :300 ][INFO    ][5172] {'/etc/haproxy/ssl': 'New Dir'}
2018-12-27 11:52:39,637 [salt.state       :1951][INFO    ][5172] Completed state [/etc/haproxy/ssl] at time 11:52:39.637861 duration_in_ms=2.539
2018-12-27 11:52:39,638 [salt.state       :1780][INFO    ][5172] Running state [/etc/haproxy/errors/429.http11] at time 11:52:39.638159
2018-12-27 11:52:39,638 [salt.state       :1813][INFO    ][5172] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-12-27 11:52:39,666 [salt.fileclient  :1219][INFO    ][5172] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-12-27 11:52:39,676 [salt.state       :300 ][INFO    ][5172] File changed:
New file
2018-12-27 11:52:39,676 [salt.state       :1951][INFO    ][5172] Completed state [/etc/haproxy/errors/429.http11] at time 11:52:39.676934 duration_in_ms=38.775
2018-12-27 11:52:39,679 [salt.state       :1780][INFO    ][5172] Running state [haproxy_status_packages] at time 11:52:39.679207
2018-12-27 11:52:39,679 [salt.state       :1813][INFO    ][5172] Executing state pkg.installed for [haproxy_status_packages]
2018-12-27 11:52:40,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 11:52:40,498 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-12-27 11:52:40,717 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227115240696501
2018-12-27 11:52:40,751 [salt.minion      :1432][INFO    ][6010] Starting a new job with PID 6010
2018-12-27 11:52:40,775 [salt.minion      :1711][INFO    ][6010] Returning information for job: 20181227115240696501
2018-12-27 11:52:42,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 11:52:42,646 [salt.state       :300 ][INFO    ][5172] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-12-27 11:52:42,663 [salt.state       :915 ][INFO    ][5172] Loading fresh modules for state activity
2018-12-27 11:52:42,698 [salt.state       :1951][INFO    ][5172] Completed state [haproxy_status_packages] at time 11:52:42.698709 duration_in_ms=3019.502
2018-12-27 11:52:42,701 [salt.state       :1780][INFO    ][5172] Running state [/usr/bin/haproxy-status.sh] at time 11:52:42.701956
2018-12-27 11:52:42,702 [salt.state       :1813][INFO    ][5172] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-12-27 11:52:42,725 [salt.fileclient  :1219][INFO    ][5172] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-12-27 11:52:42,760 [salt.state       :300 ][INFO    ][5172] File changed:
New file
2018-12-27 11:52:42,760 [salt.state       :1951][INFO    ][5172] Completed state [/usr/bin/haproxy-status.sh] at time 11:52:42.760677 duration_in_ms=58.721
2018-12-27 11:52:42,763 [salt.state       :1780][INFO    ][5172] Running state [net.ipv4.ip_nonlocal_bind] at time 11:52:42.763077
2018-12-27 11:52:42,763 [salt.state       :1813][INFO    ][5172] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-12-27 11:52:42,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-12-27 11:52:42,780 [salt.state       :300 ][INFO    ][5172] {'net.ipv4.ip_nonlocal_bind': 1}
2018-12-27 11:52:42,780 [salt.state       :1951][INFO    ][5172] Completed state [net.ipv4.ip_nonlocal_bind] at time 11:52:42.780464 duration_in_ms=17.386
2018-12-27 11:52:43,350 [salt.state       :1780][INFO    ][5172] Running state [haproxy] at time 11:52:43.350686
2018-12-27 11:52:43,351 [salt.state       :1813][INFO    ][5172] Executing state service.running for [haproxy]
2018-12-27 11:52:43,352 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-12-27 11:52:43,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-12-27 11:52:43,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-12-27 11:52:43,414 [salt.state       :300 ][INFO    ][5172] The service haproxy is already running
2018-12-27 11:52:43,415 [salt.state       :1951][INFO    ][5172] Completed state [haproxy] at time 11:52:43.415756 duration_in_ms=65.066
2018-12-27 11:52:43,416 [salt.state       :1780][INFO    ][5172] Running state [haproxy] at time 11:52:43.416450
2018-12-27 11:52:43,417 [salt.state       :1813][INFO    ][5172] Executing state service.mod_watch for [haproxy]
2018-12-27 11:52:43,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-12-27 11:52:43,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][5172] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-12-27 11:52:43,472 [salt.state       :300 ][INFO    ][5172] {'haproxy': True}
2018-12-27 11:52:43,473 [salt.state       :1951][INFO    ][5172] Completed state [haproxy] at time 11:52:43.473108 duration_in_ms=56.648
2018-12-27 11:52:43,474 [salt.minion      :1711][INFO    ][5172] Returning information for job: 20181227115230674652
2018-12-27 11:52:44,379 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command service.status with jid 20181227115244356657
2018-12-27 11:52:44,403 [salt.minion      :1432][INFO    ][6337] Starting a new job with PID 6337
2018-12-27 11:52:44,904 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6337] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-12-27 11:52:44,928 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6337] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-12-27 11:52:44,946 [salt.minion      :1711][INFO    ][6337] Returning information for job: 20181227115244356657
2018-12-27 11:52:45,816 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command service.restart with jid 20181227115245792712
2018-12-27 11:52:45,838 [salt.minion      :1432][INFO    ][6347] Starting a new job with PID 6347
2018-12-27 11:52:46,318 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6347] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-12-27 11:52:46,355 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6347] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-12-27 11:52:46,402 [salt.minion      :1711][INFO    ][6347] Returning information for job: 20181227115245792712
2018-12-27 12:16:11,423 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227121611410359
2018-12-27 12:16:11,447 [salt.minion      :1432][INFO    ][6400] Starting a new job with PID 6400
2018-12-27 12:16:12,315 [salt.state       :915 ][INFO    ][6400] Loading fresh modules for state activity
2018-12-27 12:16:12,382 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-12-27 12:16:12,417 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-12-27 12:16:12,447 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-12-27 12:16:12,493 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-12-27 12:16:13,364 [salt.state       :1780][INFO    ][6400] Running state [redis-server] at time 12:16:13.364351
2018-12-27 12:16:13,364 [salt.state       :1813][INFO    ][6400] Executing state pkg.installed for [redis-server]
2018-12-27 12:16:13,365 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:16:13,759 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-12-27 12:16:13,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 12:16:15,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:16:15,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-12-27 12:16:19,883 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:16:19,935 [salt.state       :300 ][INFO    ][6400] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2018-12-27 12:16:19,958 [salt.state       :915 ][INFO    ][6400] Loading fresh modules for state activity
2018-12-27 12:16:20,000 [salt.state       :1951][INFO    ][6400] Completed state [redis-server] at time 12:16:20.000460 duration_in_ms=6636.11
2018-12-27 12:16:20,007 [salt.state       :1780][INFO    ][6400] Running state [vm.overcommit_memory] at time 12:16:20.007364
2018-12-27 12:16:20,007 [salt.state       :1813][INFO    ][6400] Executing state sysctl.present for [vm.overcommit_memory]
2018-12-27 12:16:20,012 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-12-27 12:16:20,024 [salt.state       :300 ][INFO    ][6400] {'vm.overcommit_memory': 1}
2018-12-27 12:16:20,025 [salt.state       :1951][INFO    ][6400] Completed state [vm.overcommit_memory] at time 12:16:20.025459 duration_in_ms=18.092
2018-12-27 12:16:20,029 [salt.state       :1780][INFO    ][6400] Running state [/etc/redis/redis.conf] at time 12:16:20.029621
2018-12-27 12:16:20,030 [salt.state       :1813][INFO    ][6400] Executing state file.managed for [/etc/redis/redis.conf]
2018-12-27 12:16:20,065 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2018-12-27 12:16:20,141 [salt.state       :300 ][INFO    ][6400] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 192.168.10.33
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -284,6 +283,7 @@
 #    and resynchronize with them.
 #
 # replicaof <masterip> <masterport>
+replicaof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the replica to authenticate before
@@ -695,7 +695,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -725,9 +724,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1372,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2018-12-27 12:16:20,148 [salt.state       :1951][INFO    ][6400] Completed state [/etc/redis/redis.conf] at time 12:16:20.148683 duration_in_ms=119.062
2018-12-27 12:16:20,675 [salt.state       :1780][INFO    ][6400] Running state [redis-server] at time 12:16:20.675040
2018-12-27 12:16:20,675 [salt.state       :1813][INFO    ][6400] Executing state service.running for [redis-server]
2018-12-27 12:16:20,676 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-12-27 12:16:20,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-12-27 12:16:20,732 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-12-27 12:16:20,759 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2018-12-27 12:16:20,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-12-27 12:16:20,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-12-27 12:16:20,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-12-27 12:16:20,944 [salt.state       :300 ][INFO    ][6400] {'redis-server': True}
2018-12-27 12:16:20,945 [salt.state       :1951][INFO    ][6400] Completed state [redis-server] at time 12:16:20.945726 duration_in_ms=270.682
2018-12-27 12:16:20,949 [salt.state       :1780][INFO    ][6400] Running state [redis-sentinel] at time 12:16:20.949156
2018-12-27 12:16:20,949 [salt.state       :1813][INFO    ][6400] Executing state pkg.installed for [redis-sentinel]
2018-12-27 12:16:21,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:16:21,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-12-27 12:16:21,442 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121621422788
2018-12-27 12:16:21,462 [salt.minion      :1432][INFO    ][7347] Starting a new job with PID 7347
2018-12-27 12:16:21,479 [salt.minion      :1711][INFO    ][7347] Returning information for job: 20181227121621422788
2018-12-27 12:16:24,620 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:16:24,672 [salt.state       :300 ][INFO    ][6400] Made the following changes:
'redis-sentinel' changed from 'absent' to '5:5.0.0-4~u16.04+mcp'

2018-12-27 12:16:24,692 [salt.state       :915 ][INFO    ][6400] Loading fresh modules for state activity
2018-12-27 12:16:24,744 [salt.state       :1951][INFO    ][6400] Completed state [redis-sentinel] at time 12:16:24.744723 duration_in_ms=3795.567
2018-12-27 12:16:25,274 [salt.state       :1780][INFO    ][6400] Running state [/etc/redis/sentinel.conf] at time 12:16:25.274302
2018-12-27 12:16:25,275 [salt.state       :1813][INFO    ][6400] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-12-27 12:16:25,295 [salt.fileclient  :1219][INFO    ][6400] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/sentinel.conf'
2018-12-27 12:16:25,339 [salt.state       :300 ][INFO    ][6400] File changed:
--- 
+++ 
@@ -1,7 +1,3 @@
-# Example sentinel.conf
-
-# *** IMPORTANT ***
-#
 # By default Sentinel will not be reachable from interfaces different than
 # localhost, either use the 'bind' directive to bind to a list of network
 # interfaces, or disable protected mode with "protected-mode no" by
@@ -13,7 +9,7 @@
 # For example you may use one of the following:
 #
 # bind 127.0.0.1 192.168.1.1
-bind 127.0.0.1 ::1
+bind 192.168.10.33
 #
 # protected-mode no
 
@@ -82,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -111,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -119,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -144,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -168,7 +164,7 @@
 # NOTIFICATION SCRIPT
 #
 # sentinel notification-script <master-name> <script-path>
-# 
+#
 # Call the specified notification script for any sentinel event that is
 # generated in the WARNING level (for instance -sdown, -odown, and so forth).
 # This script should notify the system administrator via email, SMS, or any
@@ -192,14 +188,14 @@
 # When the master changed because of a failover a script can be called in
 # order to perform application-specific tasks to notify the clients that the
 # configuration has changed and the master is at a different address.
-# 
+#
 # The following arguments are passed to the script:
 #
 # <master-name> <role> <state> <from-ip> <from-port> <to-ip> <to-port>
 #
 # <state> is currently always "failover"
 # <role> is either "leader" or "observer"
-# 
+#
 # The arguments from-ip, from-port, to-ip, to-port are used to communicate
 # the old address of the master and the new address of the elected replica
 # (now a master).

2018-12-27 12:16:25,345 [salt.state       :1951][INFO    ][6400] Completed state [/etc/redis/sentinel.conf] at time 12:16:25.345908 duration_in_ms=71.607
2018-12-27 12:16:25,346 [salt.state       :1780][INFO    ][6400] Running state [redis-sentinel] at time 12:16:25.346862
2018-12-27 12:16:25,347 [salt.state       :1813][INFO    ][6400] Executing state service.running for [redis-sentinel]
2018-12-27 12:16:25,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-12-27 12:16:25,372 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-12-27 12:16:25,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-12-27 12:16:25,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-sentinel.service'] in directory '/root'
2018-12-27 12:16:25,509 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-12-27 12:16:25,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-12-27 12:16:25,551 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6400] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-12-27 12:16:25,570 [salt.state       :300 ][INFO    ][6400] {'redis-sentinel': True}
2018-12-27 12:16:25,571 [salt.state       :1951][INFO    ][6400] Completed state [redis-sentinel] at time 12:16:25.571393 duration_in_ms=224.527
2018-12-27 12:16:25,574 [salt.minion      :1711][INFO    ][6400] Returning information for job: 20181227121611410359
2018-12-27 12:16:26,173 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command test.ping with jid 20181227121626161579
2018-12-27 12:16:26,198 [salt.minion      :1432][INFO    ][7839] Starting a new job with PID 7839
2018-12-27 12:16:26,229 [salt.minion      :1711][INFO    ][7839] Returning information for job: 20181227121626161579
2018-12-27 12:18:24,100 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227121824084890
2018-12-27 12:18:24,125 [salt.minion      :1432][INFO    ][7854] Starting a new job with PID 7854
2018-12-27 12:18:29,958 [salt.state       :915 ][INFO    ][7854] Loading fresh modules for state activity
2018-12-27 12:18:30,028 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-12-27 12:18:30,063 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-12-27 12:18:30,163 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-12-27 12:18:30,195 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-12-27 12:18:30,232 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-12-27 12:18:30,332 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-12-27 12:18:30,423 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-12-27 12:18:30,515 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-12-27 12:18:30,671 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-12-27 12:18:30,767 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-12-27 12:18:30,838 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-12-27 12:18:30,911 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-12-27 12:18:31,801 [salt.state       :1780][INFO    ][7854] Running state [apache2] at time 12:18:31.801225
2018-12-27 12:18:31,801 [salt.state       :1813][INFO    ][7854] Executing state pkg.installed for [apache2]
2018-12-27 12:18:31,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:18:32,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-12-27 12:18:32,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 12:18:34,178 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121834157542
2018-12-27 12:18:34,201 [salt.minion      :1432][INFO    ][8183] Starting a new job with PID 8183
2018-12-27 12:18:34,220 [salt.minion      :1711][INFO    ][8183] Returning information for job: 20181227121834157542
2018-12-27 12:18:34,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:18:34,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-12-27 12:18:43,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:18:43,508 [salt.state       :300 ][INFO    ][7854] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-12-27 12:18:43,533 [salt.state       :915 ][INFO    ][7854] Loading fresh modules for state activity
2018-12-27 12:18:43,585 [salt.state       :1951][INFO    ][7854] Completed state [apache2] at time 12:18:43.585451 duration_in_ms=11784.226
2018-12-27 12:18:43,598 [salt.state       :1780][INFO    ][7854] Running state [openssl] at time 12:18:43.598605
2018-12-27 12:18:43,599 [salt.state       :1813][INFO    ][7854] Executing state pkg.installed for [openssl]
2018-12-27 12:18:44,325 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121844305808
2018-12-27 12:18:44,350 [salt.minion      :1432][INFO    ][9337] Starting a new job with PID 9337
2018-12-27 12:18:44,368 [salt.minion      :1711][INFO    ][9337] Returning information for job: 20181227121844305808
2018-12-27 12:18:44,370 [salt.state       :300 ][INFO    ][7854] All specified packages are already installed
2018-12-27 12:18:44,371 [salt.state       :1951][INFO    ][7854] Completed state [openssl] at time 12:18:44.371046 duration_in_ms=772.439
2018-12-27 12:18:44,373 [salt.state       :1780][INFO    ][7854] Running state [a2enmod rewrite] at time 12:18:44.373028
2018-12-27 12:18:44,373 [salt.state       :1813][INFO    ][7854] Executing state cmd.run for [a2enmod rewrite]
2018-12-27 12:18:44,374 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command 'a2enmod rewrite' in directory '/root'
2018-12-27 12:18:44,445 [salt.state       :300 ][INFO    ][7854] {'pid': 9340, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-12-27 12:18:44,446 [salt.state       :1951][INFO    ][7854] Completed state [a2enmod rewrite] at time 12:18:44.446274 duration_in_ms=73.245
2018-12-27 12:18:44,447 [salt.state       :1780][INFO    ][7854] Running state [libapache2-mod-wsgi] at time 12:18:44.447510
2018-12-27 12:18:44,448 [salt.state       :1813][INFO    ][7854] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-12-27 12:18:44,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:18:44,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-12-27 12:18:49,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:18:49,514 [salt.state       :300 ][INFO    ][7854] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'

2018-12-27 12:18:49,537 [salt.state       :915 ][INFO    ][7854] Loading fresh modules for state activity
2018-12-27 12:18:49,589 [salt.state       :1951][INFO    ][7854] Completed state [libapache2-mod-wsgi] at time 12:18:49.589251 duration_in_ms=5141.74
2018-12-27 12:18:49,592 [salt.state       :1780][INFO    ][7854] Running state [a2enmod wsgi] at time 12:18:49.592075
2018-12-27 12:18:49,592 [salt.state       :1813][INFO    ][7854] Executing state cmd.run for [a2enmod wsgi]
2018-12-27 12:18:49,593 [salt.state       :300 ][INFO    ][7854] /etc/apache2/mods-enabled/wsgi.load exists
2018-12-27 12:18:49,593 [salt.state       :1951][INFO    ][7854] Completed state [a2enmod wsgi] at time 12:18:49.593496 duration_in_ms=1.42
2018-12-27 12:18:49,598 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:18:49.598724
2018-12-27 12:18:49,600 [salt.state       :1813][INFO    ][7854] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-12-27 12:18:49,631 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-12-27 12:18:49,697 [salt.state       :300 ][INFO    ][7854] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-12-27 12:18:49,704 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:18:49.703247 duration_in_ms=104.522
2018-12-27 12:18:49,704 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:18:49.704897
2018-12-27 12:18:49,705 [salt.state       :1813][INFO    ][7854] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-12-27 12:18:49,706 [salt.state       :300 ][INFO    ][7854] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-12-27 12:18:49,708 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:18:49.708138 duration_in_ms=3.241
2018-12-27 12:18:49,709 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:18:49.709152
2018-12-27 12:18:49,709 [salt.state       :1813][INFO    ][7854] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-12-27 12:18:49,710 [salt.state       :300 ][INFO    ][7854] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-12-27 12:18:49,710 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:18:49.710480 duration_in_ms=1.329
2018-12-27 12:18:49,711 [salt.state       :1780][INFO    ][7854] Running state [a2enmod mpm_prefork] at time 12:18:49.711387
2018-12-27 12:18:49,711 [salt.state       :1813][INFO    ][7854] Executing state cmd.run for [a2enmod mpm_prefork]
2018-12-27 12:18:49,717 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-12-27 12:18:49,777 [salt.state       :300 ][INFO    ][7854] {'pid': 9670, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-12-27 12:18:49,778 [salt.state       :1951][INFO    ][7854] Completed state [a2enmod mpm_prefork] at time 12:18:49.778191 duration_in_ms=66.804
2018-12-27 12:18:49,778 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:18:49.778824
2018-12-27 12:18:49,780 [salt.state       :1813][INFO    ][7854] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-12-27 12:18:49,781 [salt.state       :300 ][INFO    ][7854] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-12-27 12:18:49,781 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:18:49.781520 duration_in_ms=2.696
2018-12-27 12:18:49,781 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:18:49.781947
2018-12-27 12:18:49,783 [salt.state       :1813][INFO    ][7854] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-12-27 12:18:49,783 [salt.state       :300 ][INFO    ][7854] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-12-27 12:18:49,784 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:18:49.784041 duration_in_ms=2.094
2018-12-27 12:18:49,787 [salt.state       :1780][INFO    ][7854] Running state [apache_server_service_task] at time 12:18:49.787739
2018-12-27 12:18:49,788 [salt.state       :1813][INFO    ][7854] Executing state test.show_notification for [apache_server_service_task]
2018-12-27 12:18:49,789 [salt.state       :300 ][INFO    ][7854] Running apache.server.service
2018-12-27 12:18:49,789 [salt.state       :1951][INFO    ][7854] Completed state [apache_server_service_task] at time 12:18:49.789481 duration_in_ms=1.742
2018-12-27 12:18:49,790 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/ports.conf] at time 12:18:49.790213
2018-12-27 12:18:49,790 [salt.state       :1813][INFO    ][7854] Executing state file.managed for [/etc/apache2/ports.conf]
2018-12-27 12:18:49,811 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-12-27 12:18:49,876 [salt.state       :300 ][INFO    ][7854] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-12-27 12:18:49,881 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/ports.conf] at time 12:18:49.881248 duration_in_ms=91.035
2018-12-27 12:18:49,881 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/conf-available/security.conf] at time 12:18:49.881898
2018-12-27 12:18:49,882 [salt.state       :1813][INFO    ][7854] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-12-27 12:18:49,901 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-12-27 12:18:49,958 [salt.state       :300 ][INFO    ][7854] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-12-27 12:18:49,965 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/conf-available/security.conf] at time 12:18:49.965755 duration_in_ms=83.856
2018-12-27 12:18:50,527 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 12:18:50.527019
2018-12-27 12:18:50,527 [salt.state       :1813][INFO    ][7854] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-12-27 12:18:50,530 [salt.state       :300 ][INFO    ][7854] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-12-27 12:18:50,531 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 12:18:50.530866 duration_in_ms=3.846
2018-12-27 12:18:50,532 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:18:50.532303
2018-12-27 12:18:50,532 [salt.state       :1813][INFO    ][7854] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-12-27 12:18:50,557 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-12-27 12:18:50,596 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-12-27 12:18:50,673 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-12-27 12:18:50,705 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-12-27 12:18:50,796 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-12-27 12:18:50,819 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-12-27 12:18:50,848 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-12-27 12:18:50,869 [salt.state       :300 ][INFO    ][7854] File changed:
New file
2018-12-27 12:18:50,870 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:18:50.870260 duration_in_ms=337.958
2018-12-27 12:18:50,871 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:18:50.871289
2018-12-27 12:18:50,871 [salt.state       :1813][INFO    ][7854] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-12-27 12:18:51,131 [salt.state       :300 ][INFO    ][7854] File changed:
New file
2018-12-27 12:18:51,132 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:18:51.132610 duration_in_ms=261.321
2018-12-27 12:18:51,136 [salt.state       :1780][INFO    ][7854] Running state [apache2] at time 12:18:51.136306
2018-12-27 12:18:51,136 [salt.state       :1813][INFO    ][7854] Executing state service.running for [apache2]
2018-12-27 12:18:51,137 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-12-27 12:18:51,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:18:51,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:18:51,212 [salt.state       :300 ][INFO    ][7854] The service apache2 is already running
2018-12-27 12:18:51,213 [salt.state       :1951][INFO    ][7854] Completed state [apache2] at time 12:18:51.213272 duration_in_ms=76.963
2018-12-27 12:18:51,213 [salt.state       :1780][INFO    ][7854] Running state [apache2] at time 12:18:51.213614
2018-12-27 12:18:51,214 [salt.state       :1813][INFO    ][7854] Executing state service.mod_watch for [apache2]
2018-12-27 12:18:51,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:18:51,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-12-27 12:18:51,415 [salt.state       :300 ][INFO    ][7854] {'apache2': True}
2018-12-27 12:18:51,416 [salt.state       :1951][INFO    ][7854] Completed state [apache2] at time 12:18:51.416784 duration_in_ms=203.169
2018-12-27 12:18:51,417 [salt.state       :1780][INFO    ][7854] Running state [/etc/apache2/conf-enabled/security.conf] at time 12:18:51.417818
2018-12-27 12:18:51,418 [salt.state       :1813][INFO    ][7854] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-12-27 12:18:51,430 [salt.state       :300 ][INFO    ][7854] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-12-27 12:18:51,431 [salt.state       :1951][INFO    ][7854] Completed state [/etc/apache2/conf-enabled/security.conf] at time 12:18:51.431049 duration_in_ms=13.23
2018-12-27 12:18:51,432 [salt.state       :1780][INFO    ][7854] Running state [gnocchi-common] at time 12:18:51.432824
2018-12-27 12:18:51,433 [salt.state       :1813][INFO    ][7854] Executing state pkg.installed for [gnocchi-common]
2018-12-27 12:18:51,715 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:18:51,748 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-12-27 12:18:54,455 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121854442643
2018-12-27 12:18:54,474 [salt.minion      :1432][INFO    ][9947] Starting a new job with PID 9947
2018-12-27 12:18:54,497 [salt.minion      :1711][INFO    ][9947] Returning information for job: 20181227121854442643
2018-12-27 12:19:04,565 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121904546758
2018-12-27 12:19:04,585 [salt.minion      :1432][INFO    ][10958] Starting a new job with PID 10958
2018-12-27 12:19:04,605 [salt.minion      :1711][INFO    ][10958] Returning information for job: 20181227121904546758
2018-12-27 12:19:14,693 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121914683237
2018-12-27 12:19:14,711 [salt.minion      :1432][INFO    ][12033] Starting a new job with PID 12033
2018-12-27 12:19:14,735 [salt.minion      :1711][INFO    ][12033] Returning information for job: 20181227121914683237
2018-12-27 12:19:24,840 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121924822887
2018-12-27 12:19:24,855 [salt.minion      :1432][INFO    ][12554] Starting a new job with PID 12554
2018-12-27 12:19:24,872 [salt.minion      :1711][INFO    ][12554] Returning information for job: 20181227121924822887
2018-12-27 12:19:28,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:19:28,300 [salt.state       :300 ][INFO    ][7854] Made the following changes:
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-os-service-types' changed from 'absent' to '1.3.0-1~u16.04+mcp'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp3'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-editor' changed from 'absent' to '0.4-2'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '2.0.2-2~u16.04+mcp'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'python-tenacity' changed from 'absent' to '4.12.0-1~u16.04+mcp'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~u16.04+mcp'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.40.0-1~u16.04+mcp'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'liblapack.so.3' changed from 'absent' to '1'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.36.0-1~u16.04+mcp'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.21.0-1~u16.04+mcp'
'python-oslo.cache' changed from 'absent' to '1.30.1-1~u16.04+mcp6'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.8.2-1~u16.04+mcp'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-testscenarios' changed from 'absent' to '0.4-4'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.38.1-1~u16.04+mcp'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.33-1build1'
'python-lxml' changed from 'absent' to '3.5.0-1ubuntu0.1'
'python-oslo.config' changed from 'absent' to '1:6.4.0-1~u16.04+mcp'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'python2.7-testscenarios' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.14.1+dfsg1-1~u16.04+mcp'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.27.0-1~u16.04+mcp'
'python-oslo.utils' changed from 'absent' to '3.36.4-1~u16.04+mcp'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.3.2-2~u16.04+mcp'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.21.0-1~u16.04+mcp'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python2.7-simplejson' changed from 'absent' to '1'
'python-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.39.0-1~u16.04+mcp'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-pbr' changed from 'absent' to '4.2.0-4~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.6.0-2~u16.04+mcp4'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-testresources' changed from 'absent' to '2.0.0-1.0~u16.04+mcp1'
'python-keystoneclient' changed from 'absent' to '1:3.17.0-1~u16.04+mcp4'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystoneauth1' changed from 'absent' to '3.10.0-1~u16.04+mcp10'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'python-keystonemiddleware' changed from 'absent' to '5.2.0-2~u16.04+mcp8'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-12-27 12:19:28,329 [salt.state       :915 ][INFO    ][7854] Loading fresh modules for state activity
2018-12-27 12:19:28,372 [salt.state       :1951][INFO    ][7854] Completed state [gnocchi-common] at time 12:19:28.372675 duration_in_ms=36939.849
2018-12-27 12:19:28,375 [salt.state       :1780][INFO    ][7854] Running state [gnocchi_ssl_mysql] at time 12:19:28.375542
2018-12-27 12:19:28,375 [salt.state       :1813][INFO    ][7854] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-12-27 12:19:28,376 [salt.state       :300 ][INFO    ][7854] Running gnocchi._ssl.mysql
2018-12-27 12:19:28,376 [salt.state       :1951][INFO    ][7854] Completed state [gnocchi_ssl_mysql] at time 12:19:28.376300 duration_in_ms=0.758
2018-12-27 12:19:28,380 [salt.state       :1780][INFO    ][7854] Running state [/etc/gnocchi/gnocchi.conf] at time 12:19:28.380538
2018-12-27 12:19:28,380 [salt.state       :1813][INFO    ][7854] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-12-27 12:19:28,411 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-12-27 12:19:28,520 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-12-27 12:19:28,541 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-12-27 12:19:28,584 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-12-27 12:19:28,629 [salt.fileclient  :1219][INFO    ][7854] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-12-27 12:19:28,640 [salt.state       :300 ][INFO    ][7854] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.33:6379

2018-12-27 12:19:28,641 [salt.state       :1951][INFO    ][7854] Completed state [/etc/gnocchi/gnocchi.conf] at time 12:19:28.641447 duration_in_ms=260.908
2018-12-27 12:19:28,645 [salt.state       :1780][INFO    ][7854] Running state [gnocchi-api] at time 12:19:28.645204
2018-12-27 12:19:28,645 [salt.state       :1813][INFO    ][7854] Executing state pkg.installed for [gnocchi-api]
2018-12-27 12:19:30,088 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:19:30,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-12-27 12:19:34,986 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121934964122
2018-12-27 12:19:35,004 [salt.minion      :1432][INFO    ][13455] Starting a new job with PID 13455
2018-12-27 12:19:35,024 [salt.minion      :1711][INFO    ][13455] Returning information for job: 20181227121934964122
2018-12-27 12:19:39,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:19:39,129 [salt.state       :300 ][INFO    ][7854] Made the following changes:
'python-novaclient' changed from 'absent' to '2:11.0.0-2~u16.04+mcp8'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.11.1-2~u16.04+mcp'
'python-openstacksdk' changed from 'absent' to '0.17.2-2~u16.04+mcp'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'
'python-glanceclient' changed from 'absent' to '1:2.13.0-3~u16.04+mcp3'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.16.1-3~u16.04+mcp8'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-cinderclient' changed from 'absent' to '1:4.0.1-1~u16.04+mcp4'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.9.1-1~u16.04+mcp4'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'

2018-12-27 12:19:39,158 [salt.state       :915 ][INFO    ][7854] Loading fresh modules for state activity
2018-12-27 12:19:39,203 [salt.state       :1951][INFO    ][7854] Completed state [gnocchi-api] at time 12:19:39.203671 duration_in_ms=10558.466
2018-12-27 12:19:39,209 [salt.state       :1780][INFO    ][7854] Running state [gnocchi-metricd] at time 12:19:39.209234
2018-12-27 12:19:39,209 [salt.state       :1813][INFO    ][7854] Executing state pkg.installed for [gnocchi-metricd]
2018-12-27 12:19:40,425 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:19:40,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-12-27 12:19:43,437 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:19:43,498 [salt.state       :300 ][INFO    ][7854] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-12-27 12:19:43,528 [salt.state       :915 ][INFO    ][7854] Loading fresh modules for state activity
2018-12-27 12:19:43,748 [salt.state       :1951][INFO    ][7854] Completed state [gnocchi-metricd] at time 12:19:43.748910 duration_in_ms=4539.675
2018-12-27 12:19:43,754 [salt.state       :1780][INFO    ][7854] Running state [python-memcache] at time 12:19:43.754642
2018-12-27 12:19:43,755 [salt.state       :1813][INFO    ][7854] Executing state pkg.installed for [python-memcache]
2018-12-27 12:19:44,564 [salt.state       :300 ][INFO    ][7854] All specified packages are already installed
2018-12-27 12:19:44,565 [salt.state       :1951][INFO    ][7854] Completed state [python-memcache] at time 12:19:44.565292 duration_in_ms=810.648
2018-12-27 12:19:44,567 [salt.state       :1780][INFO    ][7854] Running state [gnocchi-upgrade] at time 12:19:44.567685
2018-12-27 12:19:44,568 [salt.state       :1813][INFO    ][7854] Executing state cmd.run for [gnocchi-upgrade]
2018-12-27 12:19:44,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-12-27 12:19:45,129 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227121945112120
2018-12-27 12:19:45,155 [salt.minion      :1432][INFO    ][13894] Starting a new job with PID 13894
2018-12-27 12:19:45,173 [salt.minion      :1711][INFO    ][13894] Returning information for job: 20181227121945112120
2018-12-27 12:19:46,687 [salt.state       :300 ][INFO    ][7854] {'pid': 13882, 'retcode': 0, 'stderr': '2018-12-27 12:19:46,051 [13890] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-12-27 12:19:46,448 [13890] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-12-27 12:19:46,604 [13890] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.33,port=6379,db=0>>>\n2018-12-27 12:19:46,606 [13890] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-12-27 12:19:46,690 [salt.state       :1951][INFO    ][7854] Completed state [gnocchi-upgrade] at time 12:19:46.690143 duration_in_ms=2122.452
2018-12-27 12:19:46,694 [salt.state       :1780][INFO    ][7854] Running state [wsgi_gnocchi] at time 12:19:46.694867
2018-12-27 12:19:46,696 [salt.state       :1813][INFO    ][7854] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-12-27 12:19:46,698 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-12-27 12:19:46,789 [salt.state       :300 ][INFO    ][7854] {'new': 'wsgi_gnocchi', 'old': None}
2018-12-27 12:19:46,790 [salt.state       :1951][INFO    ][7854] Completed state [wsgi_gnocchi] at time 12:19:46.790554 duration_in_ms=95.683
2018-12-27 12:19:46,796 [salt.state       :1780][INFO    ][7854] Running state [apache2] at time 12:19:46.795979
2018-12-27 12:19:46,797 [salt.state       :1813][INFO    ][7854] Executing state service.running for [apache2]
2018-12-27 12:19:46,798 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:19:46,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:19:46,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-12-27 12:19:48,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:19:48,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:19:48,131 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:19:48,151 [salt.state       :300 ][INFO    ][7854] {'apache2': True}
2018-12-27 12:19:48,152 [salt.state       :1951][INFO    ][7854] Completed state [apache2] at time 12:19:48.152019 duration_in_ms=1356.036
2018-12-27 12:19:48,156 [salt.state       :1780][INFO    ][7854] Running state [gnocchi-metricd] at time 12:19:48.156323
2018-12-27 12:19:48,156 [salt.state       :1813][INFO    ][7854] Executing state service.running for [gnocchi-metricd]
2018-12-27 12:19:48,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-12-27 12:19:48,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:48,193 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:48,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:48,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:48,291 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:48,330 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:48,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:49,153 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7854] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-12-27 12:19:49,176 [salt.state       :300 ][INFO    ][7854] {'gnocchi-metricd': True}
2018-12-27 12:19:49,177 [salt.state       :1951][INFO    ][7854] Completed state [gnocchi-metricd] at time 12:19:49.177153 duration_in_ms=1020.828
2018-12-27 12:19:49,182 [salt.minion      :1711][INFO    ][7854] Returning information for job: 20181227121824084890
2018-12-27 12:19:49,813 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command test.ping with jid 20181227121949800795
2018-12-27 12:19:49,833 [salt.minion      :1432][INFO    ][14151] Starting a new job with PID 14151
2018-12-27 12:19:49,907 [salt.minion      :1711][INFO    ][14151] Returning information for job: 20181227121949800795
2018-12-27 12:20:23,538 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227122023522269
2018-12-27 12:20:23,565 [salt.minion      :1432][INFO    ][14191] Starting a new job with PID 14191
2018-12-27 12:20:29,219 [salt.state       :915 ][INFO    ][14191] Loading fresh modules for state activity
2018-12-27 12:20:29,292 [salt.fileclient  :1219][INFO    ][14191] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-12-27 12:20:29,336 [salt.fileclient  :1219][INFO    ][14191] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-12-27 12:20:30,100 [salt.fileclient  :1219][INFO    ][14191] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-12-27 12:20:30,155 [salt.fileclient  :1219][INFO    ][14191] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2018-12-27 12:20:31,893 [salt.state       :1780][INFO    ][14191] Running state [apache2] at time 12:20:31.893192
2018-12-27 12:20:31,893 [salt.state       :1813][INFO    ][14191] Executing state pkg.installed for [apache2]
2018-12-27 12:20:31,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:20:32,306 [salt.state       :300 ][INFO    ][14191] All specified packages are already installed
2018-12-27 12:20:32,307 [salt.state       :1951][INFO    ][14191] Completed state [apache2] at time 12:20:32.307533 duration_in_ms=414.338
2018-12-27 12:20:32,308 [salt.state       :1780][INFO    ][14191] Running state [openssl] at time 12:20:32.308137
2018-12-27 12:20:32,308 [salt.state       :1813][INFO    ][14191] Executing state pkg.installed for [openssl]
2018-12-27 12:20:32,319 [salt.state       :300 ][INFO    ][14191] All specified packages are already installed
2018-12-27 12:20:32,320 [salt.state       :1951][INFO    ][14191] Completed state [openssl] at time 12:20:32.320018 duration_in_ms=11.881
2018-12-27 12:20:32,321 [salt.state       :1780][INFO    ][14191] Running state [a2enmod rewrite] at time 12:20:32.321506
2018-12-27 12:20:32,322 [salt.state       :1813][INFO    ][14191] Executing state cmd.run for [a2enmod rewrite]
2018-12-27 12:20:32,323 [salt.state       :300 ][INFO    ][14191] /etc/apache2/mods-enabled/rewrite.load exists
2018-12-27 12:20:32,323 [salt.state       :1951][INFO    ][14191] Completed state [a2enmod rewrite] at time 12:20:32.323814 duration_in_ms=2.308
2018-12-27 12:20:32,324 [salt.state       :1780][INFO    ][14191] Running state [libapache2-mod-wsgi] at time 12:20:32.324405
2018-12-27 12:20:32,324 [salt.state       :1813][INFO    ][14191] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-12-27 12:20:32,334 [salt.state       :300 ][INFO    ][14191] All specified packages are already installed
2018-12-27 12:20:32,334 [salt.state       :1951][INFO    ][14191] Completed state [libapache2-mod-wsgi] at time 12:20:32.334780 duration_in_ms=10.375
2018-12-27 12:20:32,335 [salt.state       :1780][INFO    ][14191] Running state [a2enmod wsgi] at time 12:20:32.335340
2018-12-27 12:20:32,335 [salt.state       :1813][INFO    ][14191] Executing state cmd.run for [a2enmod wsgi]
2018-12-27 12:20:32,336 [salt.state       :300 ][INFO    ][14191] /etc/apache2/mods-enabled/wsgi.load exists
2018-12-27 12:20:32,336 [salt.state       :1951][INFO    ][14191] Completed state [a2enmod wsgi] at time 12:20:32.336564 duration_in_ms=1.223
2018-12-27 12:20:32,341 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:20:32.341469
2018-12-27 12:20:32,343 [salt.state       :1813][INFO    ][14191] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-12-27 12:20:32,605 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-12-27 12:20:32,605 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:20:32.605747 duration_in_ms=264.277
2018-12-27 12:20:32,606 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:20:32.606114
2018-12-27 12:20:32,607 [salt.state       :1813][INFO    ][14191] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-12-27 12:20:32,607 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-12-27 12:20:32,608 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:20:32.608006 duration_in_ms=1.892
2018-12-27 12:20:32,608 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:20:32.608388
2018-12-27 12:20:32,609 [salt.state       :1813][INFO    ][14191] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-12-27 12:20:32,609 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-12-27 12:20:32,609 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:20:32.609847 duration_in_ms=1.458
2018-12-27 12:20:32,610 [salt.state       :1780][INFO    ][14191] Running state [a2enmod mpm_prefork] at time 12:20:32.610559
2018-12-27 12:20:32,610 [salt.state       :1813][INFO    ][14191] Executing state cmd.run for [a2enmod mpm_prefork]
2018-12-27 12:20:32,611 [salt.state       :300 ][INFO    ][14191] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-12-27 12:20:32,611 [salt.state       :1951][INFO    ][14191] Completed state [a2enmod mpm_prefork] at time 12:20:32.611707 duration_in_ms=1.148
2018-12-27 12:20:32,612 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:20:32.612070
2018-12-27 12:20:32,612 [salt.state       :1813][INFO    ][14191] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-12-27 12:20:32,613 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-12-27 12:20:32,613 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:20:32.613577 duration_in_ms=1.506
2018-12-27 12:20:32,613 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:20:32.613951
2018-12-27 12:20:32,614 [salt.state       :1813][INFO    ][14191] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-12-27 12:20:32,615 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-12-27 12:20:32,615 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:20:32.615424 duration_in_ms=1.474
2018-12-27 12:20:32,616 [salt.state       :1780][INFO    ][14191] Running state [apache_server_service_task] at time 12:20:32.616254
2018-12-27 12:20:32,617 [salt.state       :1813][INFO    ][14191] Executing state test.show_notification for [apache_server_service_task]
2018-12-27 12:20:32,618 [salt.state       :300 ][INFO    ][14191] Running apache.server.service
2018-12-27 12:20:32,618 [salt.state       :1951][INFO    ][14191] Completed state [apache_server_service_task] at time 12:20:32.618659 duration_in_ms=2.405
2018-12-27 12:20:32,619 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/ports.conf] at time 12:20:32.619190
2018-12-27 12:20:32,619 [salt.state       :1813][INFO    ][14191] Executing state file.managed for [/etc/apache2/ports.conf]
2018-12-27 12:20:32,708 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/ports.conf is in the correct state
2018-12-27 12:20:32,709 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/ports.conf] at time 12:20:32.709003 duration_in_ms=89.813
2018-12-27 12:20:32,709 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/conf-available/security.conf] at time 12:20:32.709527
2018-12-27 12:20:32,710 [salt.state       :1813][INFO    ][14191] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-12-27 12:20:32,793 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/conf-available/security.conf is in the correct state
2018-12-27 12:20:32,794 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/conf-available/security.conf] at time 12:20:32.794564 duration_in_ms=85.036
2018-12-27 12:20:32,801 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 12:20:32.801074
2018-12-27 12:20:32,801 [salt.state       :1813][INFO    ][14191] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-12-27 12:20:32,802 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-12-27 12:20:32,802 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 12:20:32.802351 duration_in_ms=1.277
2018-12-27 12:20:32,803 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:20:32.803542
2018-12-27 12:20:32,804 [salt.state       :1813][INFO    ][14191] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-12-27 12:20:33,076 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-12-27 12:20:33,077 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:20:33.077194 duration_in_ms=273.652
2018-12-27 12:20:33,077 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:20:33.077733
2018-12-27 12:20:33,078 [salt.state       :1813][INFO    ][14191] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-12-27 12:20:33,333 [salt.state       :300 ][INFO    ][14191] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-12-27 12:20:33,334 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:20:33.334142 duration_in_ms=256.408
2018-12-27 12:20:33,338 [salt.state       :1780][INFO    ][14191] Running state [apache2] at time 12:20:33.338195
2018-12-27 12:20:33,338 [salt.state       :1813][INFO    ][14191] Executing state service.running for [apache2]
2018-12-27 12:20:33,341 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-12-27 12:20:33,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:20:33,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:20:33,452 [salt.state       :300 ][INFO    ][14191] The service apache2 is already running
2018-12-27 12:20:33,452 [salt.state       :1951][INFO    ][14191] Completed state [apache2] at time 12:20:33.452636 duration_in_ms=114.438
2018-12-27 12:20:33,453 [salt.state       :1780][INFO    ][14191] Running state [/etc/apache2/conf-enabled/security.conf] at time 12:20:33.453882
2018-12-27 12:20:33,454 [salt.state       :1813][INFO    ][14191] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-12-27 12:20:33,457 [salt.state       :300 ][INFO    ][14191] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-12-27 12:20:33,457 [salt.state       :1951][INFO    ][14191] Completed state [/etc/apache2/conf-enabled/security.conf] at time 12:20:33.457771 duration_in_ms=3.889
2018-12-27 12:20:33,459 [salt.state       :1780][INFO    ][14191] Running state [panko-api] at time 12:20:33.459201
2018-12-27 12:20:33,459 [salt.state       :1813][INFO    ][14191] Executing state pkg.installed for [panko-api]
2018-12-27 12:20:33,489 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-12-27 12:20:33,571 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 12:20:33,647 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122033629839
2018-12-27 12:20:33,667 [salt.minion      :1432][INFO    ][14259] Starting a new job with PID 14259
2018-12-27 12:20:33,685 [salt.minion      :1711][INFO    ][14259] Returning information for job: 20181227122033629839
2018-12-27 12:20:35,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:20:35,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-12-27 12:20:42,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:20:42,675 [salt.state       :300 ][INFO    ][14191] Made the following changes:
'python3-dateutil' changed from 'absent' to '2.6.1-1~u16.04+mcp1'
'python-pankoclient' changed from 'absent' to '0.5.0-2~u16.04+mcp5'
'python3-editor' changed from 'absent' to '0.4-2'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'python-panko' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python3-sqlalchemy-ext' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'libmatheval1' changed from 'absent' to '1.1.11+dfsg-2'
'python-q-text-as-data' changed from 'absent' to '1.4.0-1'
'panko-common' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python3-sqlalchemy' changed from 'absent' to '1.2.8+ds1-1~u16.04+mcp'
'uwsgi-core' changed from 'absent' to '2.0.12-5ubuntu3.2'
'panko-api' changed from 'absent' to '5.0.0-2~u16.04+mcp'
'python-oslo.reports' changed from 'absent' to '1.26.0-2~u16.04+mcp'
'python3-alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'python3-mako' changed from 'absent' to '1.0.3+ds1-1ubuntu1'
'sqlite3' changed from 'absent' to '3.11.0-1ubuntu1'
'uwsgi-plugin-python' changed from 'absent' to '2.0.12-5ubuntu3.2'
'libjansson4' changed from 'absent' to '2.7-3ubuntu0.1'
'alembic' changed from 'absent' to '1.0.0-2~u16.04+mcp'
'q-text-as-data' changed from 'absent' to '1'

2018-12-27 12:20:42,709 [salt.state       :915 ][INFO    ][14191] Loading fresh modules for state activity
2018-12-27 12:20:42,750 [salt.state       :1951][INFO    ][14191] Completed state [panko-api] at time 12:20:42.750681 duration_in_ms=9291.48
2018-12-27 12:20:42,753 [salt.state       :1780][INFO    ][14191] Running state [panko_ssl_mysql] at time 12:20:42.753770
2018-12-27 12:20:42,754 [salt.state       :1813][INFO    ][14191] Executing state test.show_notification for [panko_ssl_mysql]
2018-12-27 12:20:42,754 [salt.state       :300 ][INFO    ][14191] Running panko._ssl.mysql
2018-12-27 12:20:42,754 [salt.state       :1951][INFO    ][14191] Completed state [panko_ssl_mysql] at time 12:20:42.754449 duration_in_ms=0.68
2018-12-27 12:20:42,757 [salt.state       :1780][INFO    ][14191] Running state [/etc/panko/panko.conf] at time 12:20:42.757106
2018-12-27 12:20:42,757 [salt.state       :1813][INFO    ][14191] Executing state file.managed for [/etc/panko/panko.conf]
2018-12-27 12:20:42,785 [salt.fileclient  :1219][INFO    ][14191] Fetching file from saltenv 'base', ** done ** 'panko/files/rocky/panko.conf.Debian'
2018-12-27 12:20:42,851 [salt.fileclient  :1219][INFO    ][14191] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-12-27 12:20:42,876 [salt.fileclient  :1219][INFO    ][14191] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-12-27 12:20:42,986 [salt.state       :300 ][INFO    ][14191] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,73 +159,77 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -248,50 +239,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
-
-#
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -306,6 +311,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -321,6 +327,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -358,6 +365,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -371,36 +379,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -478,68 +456,115 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-12-27 12:20:42,987 [salt.state       :1951][INFO    ][14191] Completed state [/etc/panko/panko.conf] at time 12:20:42.987239 duration_in_ms=230.132
2018-12-27 12:20:42,987 [salt.state       :1780][INFO    ][14191] Running state [panko-dbsync] at time 12:20:42.987698
2018-12-27 12:20:42,987 [salt.state       :1813][INFO    ][14191] Executing state cmd.run for [panko-dbsync]
2018-12-27 12:20:42,990 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command '/bin/false' in directory '/root'
2018-12-27 12:20:43,010 [salt.state       :300 ][INFO    ][14191] onlyif execution failed
2018-12-27 12:20:43,011 [salt.state       :1951][INFO    ][14191] Completed state [panko-dbsync] at time 12:20:43.011137 duration_in_ms=23.437
2018-12-27 12:20:43,018 [salt.state       :1780][INFO    ][14191] Running state [wsgi_panko] at time 12:20:43.018531
2018-12-27 12:20:43,019 [salt.state       :1813][INFO    ][14191] Executing state apache_site.enabled for [wsgi_panko]
2018-12-27 12:20:43,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-12-27 12:20:43,149 [salt.state       :300 ][INFO    ][14191] {'new': 'wsgi_panko', 'old': None}
2018-12-27 12:20:43,150 [salt.state       :1951][INFO    ][14191] Completed state [wsgi_panko] at time 12:20:43.150294 duration_in_ms=131.761
2018-12-27 12:20:43,747 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122043733881
2018-12-27 12:20:43,769 [salt.minion      :1432][INFO    ][15173] Starting a new job with PID 15173
2018-12-27 12:20:43,789 [salt.minion      :1711][INFO    ][15173] Returning information for job: 20181227122043733881
2018-12-27 12:20:43,817 [salt.state       :1780][INFO    ][14191] Running state [apache2] at time 12:20:43.817302
2018-12-27 12:20:43,818 [salt.state       :1813][INFO    ][14191] Executing state service.running for [apache2]
2018-12-27 12:20:43,819 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:20:43,847 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:20:43,884 [salt.state       :300 ][INFO    ][14191] The service apache2 is already running
2018-12-27 12:20:43,886 [salt.state       :1951][INFO    ][14191] Completed state [apache2] at time 12:20:43.885872 duration_in_ms=68.564
2018-12-27 12:20:43,887 [salt.state       :1780][INFO    ][14191] Running state [apache2] at time 12:20:43.887001
2018-12-27 12:20:43,889 [salt.state       :1813][INFO    ][14191] Executing state service.mod_watch for [apache2]
2018-12-27 12:20:43,891 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:20:43,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][14191] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-12-27 12:20:46,300 [salt.state       :300 ][INFO    ][14191] {'apache2': True}
2018-12-27 12:20:46,301 [salt.state       :1951][INFO    ][14191] Completed state [apache2] at time 12:20:46.301190 duration_in_ms=2414.189
2018-12-27 12:20:46,308 [salt.minion      :1711][INFO    ][14191] Returning information for job: 20181227122023522269
2018-12-27 12:20:46,887 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command test.ping with jid 20181227122046872719
2018-12-27 12:20:46,907 [salt.minion      :1432][INFO    ][15315] Starting a new job with PID 15315
2018-12-27 12:20:46,928 [salt.minion      :1711][INFO    ][15315] Returning information for job: 20181227122046872719
2018-12-27 12:23:14,967 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227122314957440
2018-12-27 12:23:14,994 [salt.minion      :1432][INFO    ][15325] Starting a new job with PID 15325
2018-12-27 12:23:20,801 [salt.state       :915 ][INFO    ][15325] Loading fresh modules for state activity
2018-12-27 12:23:20,874 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-12-27 12:23:20,919 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-12-27 12:23:21,104 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2018-12-27 12:23:21,168 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-12-27 12:23:21,251 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-12-27 12:23:23,799 [salt.state       :1780][INFO    ][15325] Running state [aodh-api] at time 12:23:23.799031
2018-12-27 12:23:23,799 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [aodh-api]
2018-12-27 12:23:23,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:23:24,197 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-12-27 12:23:24,304 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 12:23:25,013 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122324996805
2018-12-27 12:23:25,031 [salt.minion      :1432][INFO    ][15580] Starting a new job with PID 15580
2018-12-27 12:23:25,049 [salt.minion      :1711][INFO    ][15580] Returning information for job: 20181227122324996805
2018-12-27 12:23:26,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:23:26,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-12-27 12:23:35,142 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122335129368
2018-12-27 12:23:35,168 [salt.minion      :1432][INFO    ][16101] Starting a new job with PID 16101
2018-12-27 12:23:35,198 [salt.minion      :1711][INFO    ][16101] Returning information for job: 20181227122335129368
2018-12-27 12:23:45,295 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122345278179
2018-12-27 12:23:45,315 [salt.minion      :1432][INFO    ][21162] Starting a new job with PID 21162
2018-12-27 12:23:45,338 [salt.minion      :1711][INFO    ][21162] Returning information for job: 20181227122345278179
2018-12-27 12:23:46,444 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:23:46,505 [salt.state       :300 ][INFO    ][15325] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'build-essential' changed from 'absent' to '12.1ubuntu2'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.27.0-2~u16.04+mcp'
'python-kafka' changed from 'absent' to '1.3.2-1.1~u16.04+mcp2'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'aodh-common' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'make:any' changed from 'absent' to '1'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'python2.7-greenlet' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-aodh' changed from 'absent' to '7.0.0-1~u16.04+mcp4'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-141.167'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-amqp' changed from 'absent' to '2.3.2-1~u16.04+mcp1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-oslo.messaging' changed from 'absent' to '8.1.0-1~u16.04+mcp1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'c++-compiler' changed from 'absent' to '1'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-greenlet' changed from 'absent' to '0.4.15-1~u16.04+mcp'
'libc-dev' changed from 'absent' to '1'
'python-oslo.service' changed from 'absent' to '1.31.6-1~u16.04+mcp3'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.11'
'linux-kernel-headers' changed from 'absent' to '1'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-12-27 12:23:46,551 [salt.state       :915 ][INFO    ][15325] Loading fresh modules for state activity
2018-12-27 12:23:46,831 [salt.state       :1951][INFO    ][15325] Completed state [aodh-api] at time 12:23:46.830984 duration_in_ms=23031.954
2018-12-27 12:23:46,836 [salt.state       :1780][INFO    ][15325] Running state [aodh-evaluator] at time 12:23:46.836657
2018-12-27 12:23:46,837 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [aodh-evaluator]
2018-12-27 12:23:48,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:23:48,501 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-12-27 12:23:53,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:23:53,405 [salt.state       :300 ][INFO    ][15325] Made the following changes:
'aodh-evaluator' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2018-12-27 12:23:53,442 [salt.state       :915 ][INFO    ][15325] Loading fresh modules for state activity
2018-12-27 12:23:53,512 [salt.state       :1951][INFO    ][15325] Completed state [aodh-evaluator] at time 12:23:53.512617 duration_in_ms=6675.96
2018-12-27 12:23:53,525 [salt.state       :1780][INFO    ][15325] Running state [aodh-notifier] at time 12:23:53.525408
2018-12-27 12:23:53,525 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [aodh-notifier]
2018-12-27 12:23:55,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:23:55,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-12-27 12:23:55,441 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122355429084
2018-12-27 12:23:55,461 [salt.minion      :1432][INFO    ][21615] Starting a new job with PID 21615
2018-12-27 12:23:55,506 [salt.minion      :1711][INFO    ][21615] Returning information for job: 20181227122355429084
2018-12-27 12:23:58,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:23:58,828 [salt.state       :300 ][INFO    ][15325] Made the following changes:
'aodh-notifier' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2018-12-27 12:23:58,858 [salt.state       :915 ][INFO    ][15325] Loading fresh modules for state activity
2018-12-27 12:23:58,911 [salt.state       :1951][INFO    ][15325] Completed state [aodh-notifier] at time 12:23:58.911378 duration_in_ms=5385.969
2018-12-27 12:23:58,918 [salt.state       :1780][INFO    ][15325] Running state [aodh-listener] at time 12:23:58.918817
2018-12-27 12:23:58,927 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [aodh-listener]
2018-12-27 12:23:59,969 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:24:00,011 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-12-27 12:24:03,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:24:03,442 [salt.state       :300 ][INFO    ][15325] Made the following changes:
'aodh-listener' changed from 'absent' to '7.0.0-1~u16.04+mcp4'

2018-12-27 12:24:03,470 [salt.state       :915 ][INFO    ][15325] Loading fresh modules for state activity
2018-12-27 12:24:03,513 [salt.state       :1951][INFO    ][15325] Completed state [aodh-listener] at time 12:24:03.512933 duration_in_ms=4594.116
2018-12-27 12:24:03,518 [salt.state       :1780][INFO    ][15325] Running state [python-aodhclient] at time 12:24:03.518487
2018-12-27 12:24:03,518 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [python-aodhclient]
2018-12-27 12:24:04,762 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:24:04,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-12-27 12:24:05,622 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122405603439
2018-12-27 12:24:05,651 [salt.minion      :1432][INFO    ][22228] Starting a new job with PID 22228
2018-12-27 12:24:05,676 [salt.minion      :1711][INFO    ][22228] Returning information for job: 20181227122405603439
2018-12-27 12:24:06,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:24:06,951 [salt.state       :300 ][INFO    ][15325] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.1.1-2~u16.04+mcp3'

2018-12-27 12:24:06,984 [salt.state       :915 ][INFO    ][15325] Loading fresh modules for state activity
2018-12-27 12:24:07,029 [salt.state       :1951][INFO    ][15325] Completed state [python-aodhclient] at time 12:24:07.029015 duration_in_ms=3510.528
2018-12-27 12:24:07,035 [salt.state       :1780][INFO    ][15325] Running state [aodh_ssl_mysql] at time 12:24:07.035652
2018-12-27 12:24:07,035 [salt.state       :1813][INFO    ][15325] Executing state test.show_notification for [aodh_ssl_mysql]
2018-12-27 12:24:07,036 [salt.state       :300 ][INFO    ][15325] Running aodh._ssl.mysql
2018-12-27 12:24:07,036 [salt.state       :1951][INFO    ][15325] Completed state [aodh_ssl_mysql] at time 12:24:07.036466 duration_in_ms=0.814
2018-12-27 12:24:07,036 [salt.state       :1780][INFO    ][15325] Running state [aodh_ssl_rabbitmq] at time 12:24:07.036822
2018-12-27 12:24:07,037 [salt.state       :1813][INFO    ][15325] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-12-27 12:24:07,037 [salt.state       :300 ][INFO    ][15325] Running aodh._ssl.rabbitmq
2018-12-27 12:24:07,037 [salt.state       :1951][INFO    ][15325] Completed state [aodh_ssl_rabbitmq] at time 12:24:07.037863 duration_in_ms=1.041
2018-12-27 12:24:07,038 [salt.state       :1780][INFO    ][15325] Running state [/etc/aodh/aodh.conf] at time 12:24:07.038481
2018-12-27 12:24:07,038 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-12-27 12:24:07,078 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/aodh.conf.Debian'
2018-12-27 12:24:07,164 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-12-27 12:24:07,292 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-12-27 12:24:07,310 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-12-27 12:24:07,341 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-12-27 12:24:07,390 [salt.state       :300 ][INFO    ][15325] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.33
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-rFNLA3/aodh-7.0.0/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,71 +441,75 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# DEPRECATED: Minimum number of SQL connections to keep open in a pool.
-# (integer value)
+# (obryndzii) we change default connection_recycle_time to 280 in order to fix numerous
+# DBConnection errors in services until we implement this setting in reclass-system
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: The option to set the minimum pool size is not supported by
-# sqlalchemy.
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -532,32 +519,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
-# Optional URL parameters to append onto the connection URL at connect time;
-# specify as param1=value1&param2=value2&... (string value)
-#connection_parameters =
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -571,36 +565,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -615,6 +1123,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -630,6 +1139,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -667,6 +1177,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -680,36 +1191,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -787,862 +1268,112 @@
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-12-27 12:24:07,392 [salt.state       :1951][INFO    ][15325] Completed state [/etc/aodh/aodh.conf] at time 12:24:07.392820 duration_in_ms=354.338
2018-12-27 12:24:07,394 [salt.state       :1780][INFO    ][15325] Running state [aodh-dbsync] at time 12:24:07.394367
2018-12-27 12:24:07,394 [salt.state       :1813][INFO    ][15325] Executing state cmd.run for [aodh-dbsync]
2018-12-27 12:24:07,397 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command '/bin/false' in directory '/root'
2018-12-27 12:24:07,420 [salt.state       :300 ][INFO    ][15325] onlyif execution failed
2018-12-27 12:24:07,420 [salt.state       :1951][INFO    ][15325] Completed state [aodh-dbsync] at time 12:24:07.420490 duration_in_ms=26.122
2018-12-27 12:24:07,438 [salt.state       :1780][INFO    ][15325] Running state [apache2] at time 12:24:07.438322
2018-12-27 12:24:07,438 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [apache2]
2018-12-27 12:24:08,438 [salt.state       :300 ][INFO    ][15325] All specified packages are already installed
2018-12-27 12:24:08,439 [salt.state       :1951][INFO    ][15325] Completed state [apache2] at time 12:24:08.439166 duration_in_ms=1000.843
2018-12-27 12:24:08,439 [salt.state       :1780][INFO    ][15325] Running state [openssl] at time 12:24:08.439580
2018-12-27 12:24:08,440 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [openssl]
2018-12-27 12:24:08,461 [salt.state       :300 ][INFO    ][15325] All specified packages are already installed
2018-12-27 12:24:08,461 [salt.state       :1951][INFO    ][15325] Completed state [openssl] at time 12:24:08.461188 duration_in_ms=21.608
2018-12-27 12:24:08,461 [salt.state       :1780][INFO    ][15325] Running state [a2enmod rewrite] at time 12:24:08.461905
2018-12-27 12:24:08,462 [salt.state       :1813][INFO    ][15325] Executing state cmd.run for [a2enmod rewrite]
2018-12-27 12:24:08,462 [salt.state       :300 ][INFO    ][15325] /etc/apache2/mods-enabled/rewrite.load exists
2018-12-27 12:24:08,462 [salt.state       :1951][INFO    ][15325] Completed state [a2enmod rewrite] at time 12:24:08.462757 duration_in_ms=0.852
2018-12-27 12:24:08,463 [salt.state       :1780][INFO    ][15325] Running state [libapache2-mod-wsgi] at time 12:24:08.463289
2018-12-27 12:24:08,463 [salt.state       :1813][INFO    ][15325] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-12-27 12:24:08,472 [salt.state       :300 ][INFO    ][15325] All specified packages are already installed
2018-12-27 12:24:08,473 [salt.state       :1951][INFO    ][15325] Completed state [libapache2-mod-wsgi] at time 12:24:08.473120 duration_in_ms=9.83
2018-12-27 12:24:08,473 [salt.state       :1780][INFO    ][15325] Running state [a2enmod wsgi] at time 12:24:08.473626
2018-12-27 12:24:08,473 [salt.state       :1813][INFO    ][15325] Executing state cmd.run for [a2enmod wsgi]
2018-12-27 12:24:08,474 [salt.state       :300 ][INFO    ][15325] /etc/apache2/mods-enabled/wsgi.load exists
2018-12-27 12:24:08,474 [salt.state       :1951][INFO    ][15325] Completed state [a2enmod wsgi] at time 12:24:08.474426 duration_in_ms=0.8
2018-12-27 12:24:08,477 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:24:08.477183
2018-12-27 12:24:08,477 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-12-27 12:24:08,559 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-12-27 12:24:08,559 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 12:24:08.559650 duration_in_ms=82.792
2018-12-27 12:24:08,561 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:24:08.561207
2018-12-27 12:24:08,561 [salt.state       :1813][INFO    ][15325] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-12-27 12:24:08,561 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-12-27 12:24:08,562 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 12:24:08.562086 duration_in_ms=0.879
2018-12-27 12:24:08,562 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:24:08.562357
2018-12-27 12:24:08,562 [salt.state       :1813][INFO    ][15325] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-12-27 12:24:08,563 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-12-27 12:24:08,563 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 12:24:08.563465 duration_in_ms=1.108
2018-12-27 12:24:08,564 [salt.state       :1780][INFO    ][15325] Running state [a2enmod mpm_prefork] at time 12:24:08.564335
2018-12-27 12:24:08,564 [salt.state       :1813][INFO    ][15325] Executing state cmd.run for [a2enmod mpm_prefork]
2018-12-27 12:24:08,564 [salt.state       :300 ][INFO    ][15325] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-12-27 12:24:08,565 [salt.state       :1951][INFO    ][15325] Completed state [a2enmod mpm_prefork] at time 12:24:08.565152 duration_in_ms=0.817
2018-12-27 12:24:08,565 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:24:08.565406
2018-12-27 12:24:08,565 [salt.state       :1813][INFO    ][15325] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-12-27 12:24:08,565 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-12-27 12:24:08,566 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 12:24:08.566138 duration_in_ms=0.732
2018-12-27 12:24:08,566 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:24:08.566376
2018-12-27 12:24:08,566 [salt.state       :1813][INFO    ][15325] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-12-27 12:24:08,566 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-12-27 12:24:08,567 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 12:24:08.567108 duration_in_ms=0.732
2018-12-27 12:24:08,567 [salt.state       :1780][INFO    ][15325] Running state [apache_server_service_task] at time 12:24:08.567354
2018-12-27 12:24:08,567 [salt.state       :1813][INFO    ][15325] Executing state test.show_notification for [apache_server_service_task]
2018-12-27 12:24:08,567 [salt.state       :300 ][INFO    ][15325] Running apache.server.service
2018-12-27 12:24:08,568 [salt.state       :1951][INFO    ][15325] Completed state [apache_server_service_task] at time 12:24:08.568123 duration_in_ms=0.768
2018-12-27 12:24:08,569 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/ports.conf] at time 12:24:08.569250
2018-12-27 12:24:08,569 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/apache2/ports.conf]
2018-12-27 12:24:08,651 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/ports.conf is in the correct state
2018-12-27 12:24:08,651 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/ports.conf] at time 12:24:08.651785 duration_in_ms=82.535
2018-12-27 12:24:08,652 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/conf-available/security.conf] at time 12:24:08.652719
2018-12-27 12:24:08,652 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-12-27 12:24:08,724 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/conf-available/security.conf is in the correct state
2018-12-27 12:24:08,725 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/conf-available/security.conf] at time 12:24:08.725102 duration_in_ms=72.383
2018-12-27 12:24:08,734 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 12:24:08.734677
2018-12-27 12:24:08,735 [salt.state       :1813][INFO    ][15325] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-12-27 12:24:08,735 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-12-27 12:24:08,735 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 12:24:08.735646 duration_in_ms=0.969
2018-12-27 12:24:08,736 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:24:08.736223
2018-12-27 12:24:08,736 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-12-27 12:24:09,010 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-12-27 12:24:09,010 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 12:24:09.010432 duration_in_ms=274.208
2018-12-27 12:24:09,011 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:24:09.010971
2018-12-27 12:24:09,011 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-12-27 12:24:09,292 [salt.state       :300 ][INFO    ][15325] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-12-27 12:24:09,293 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 12:24:09.292981 duration_in_ms=282.009
2018-12-27 12:24:09,295 [salt.state       :1780][INFO    ][15325] Running state [apache2] at time 12:24:09.295821
2018-12-27 12:24:09,296 [salt.state       :1813][INFO    ][15325] Executing state service.running for [apache2]
2018-12-27 12:24:09,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-12-27 12:24:09,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:24:09,351 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:24:09,377 [salt.state       :300 ][INFO    ][15325] The service apache2 is already running
2018-12-27 12:24:09,378 [salt.state       :1951][INFO    ][15325] Completed state [apache2] at time 12:24:09.378582 duration_in_ms=82.758
2018-12-27 12:24:09,380 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/conf-enabled/security.conf] at time 12:24:09.380216
2018-12-27 12:24:09,380 [salt.state       :1813][INFO    ][15325] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-12-27 12:24:09,383 [salt.state       :300 ][INFO    ][15325] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-12-27 12:24:09,383 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/conf-enabled/security.conf] at time 12:24:09.383515 duration_in_ms=3.299
2018-12-27 12:24:09,385 [salt.state       :1780][INFO    ][15325] Running state [/etc/default/aodh-evaluator] at time 12:24:09.385000
2018-12-27 12:24:09,385 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-12-27 12:24:09,416 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-12-27 12:24:09,434 [salt.state       :300 ][INFO    ][15325] File changed:
New file
2018-12-27 12:24:09,434 [salt.state       :1951][INFO    ][15325] Completed state [/etc/default/aodh-evaluator] at time 12:24:09.434832 duration_in_ms=49.832
2018-12-27 12:24:09,435 [salt.state       :1780][INFO    ][15325] Running state [/etc/default/aodh-notifier] at time 12:24:09.435750
2018-12-27 12:24:09,436 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/default/aodh-notifier]
2018-12-27 12:24:09,467 [salt.state       :300 ][INFO    ][15325] File changed:
New file
2018-12-27 12:24:09,467 [salt.state       :1951][INFO    ][15325] Completed state [/etc/default/aodh-notifier] at time 12:24:09.467334 duration_in_ms=31.583
2018-12-27 12:24:09,467 [salt.state       :1780][INFO    ][15325] Running state [/etc/default/aodh-listener] at time 12:24:09.467899
2018-12-27 12:24:09,468 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/default/aodh-listener]
2018-12-27 12:24:09,496 [salt.state       :300 ][INFO    ][15325] File changed:
New file
2018-12-27 12:24:09,496 [salt.state       :1951][INFO    ][15325] Completed state [/etc/default/aodh-listener] at time 12:24:09.496659 duration_in_ms=28.758
2018-12-27 12:24:09,497 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 12:24:09.497419
2018-12-27 12:24:09,498 [salt.state       :1813][INFO    ][15325] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-12-27 12:24:09,525 [salt.fileclient  :1219][INFO    ][15325] Fetching file from saltenv 'base', ** done ** 'aodh/files/rocky/apache-aodh.apache2.conf.Debian'
2018-12-27 12:24:09,570 [salt.state       :300 ][INFO    ][15325] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.33:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-12-27 12:24:09,573 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 12:24:09.573324 duration_in_ms=75.905
2018-12-27 12:24:09,573 [salt.state       :1780][INFO    ][15325] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 12:24:09.573666
2018-12-27 12:24:09,573 [salt.state       :1813][INFO    ][15325] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-12-27 12:24:09,576 [salt.state       :300 ][INFO    ][15325] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-12-27 12:24:09,577 [salt.state       :1951][INFO    ][15325] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 12:24:09.577197 duration_in_ms=3.485
2018-12-27 12:24:09,578 [salt.state       :1780][INFO    ][15325] Running state [apache2] at time 12:24:09.578767
2018-12-27 12:24:09,579 [salt.state       :1813][INFO    ][15325] Executing state service.running for [apache2]
2018-12-27 12:24:09,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:24:09,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-12-27 12:24:09,636 [salt.state       :300 ][INFO    ][15325] The service apache2 is already running
2018-12-27 12:24:09,637 [salt.state       :1951][INFO    ][15325] Completed state [apache2] at time 12:24:09.637539 duration_in_ms=58.77
2018-12-27 12:24:09,638 [salt.state       :1780][INFO    ][15325] Running state [apache2] at time 12:24:09.638352
2018-12-27 12:24:09,639 [salt.state       :1813][INFO    ][15325] Executing state service.mod_watch for [apache2]
2018-12-27 12:24:09,642 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-12-27 12:24:09,668 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-12-27 12:24:12,086 [salt.state       :300 ][INFO    ][15325] {'apache2': True}
2018-12-27 12:24:12,087 [salt.state       :1951][INFO    ][15325] Completed state [apache2] at time 12:24:12.087168 duration_in_ms=2448.815
2018-12-27 12:24:12,090 [salt.state       :1780][INFO    ][15325] Running state [aodh-evaluator] at time 12:24:12.090804
2018-12-27 12:24:12,091 [salt.state       :1813][INFO    ][15325] Executing state service.running for [aodh-evaluator]
2018-12-27 12:24:12,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-12-27 12:24:12,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-12-27 12:24:12,151 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-12-27 12:24:12,179 [salt.state       :300 ][INFO    ][15325] The service aodh-evaluator is already running
2018-12-27 12:24:12,180 [salt.state       :1951][INFO    ][15325] Completed state [aodh-evaluator] at time 12:24:12.180430 duration_in_ms=89.257
2018-12-27 12:24:12,181 [salt.state       :1780][INFO    ][15325] Running state [aodh-evaluator] at time 12:24:12.181059
2018-12-27 12:24:12,181 [salt.state       :1813][INFO    ][15325] Executing state service.mod_watch for [aodh-evaluator]
2018-12-27 12:24:12,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-12-27 12:24:12,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-12-27 12:24:12,398 [salt.state       :300 ][INFO    ][15325] {'aodh-evaluator': True}
2018-12-27 12:24:12,399 [salt.state       :1951][INFO    ][15325] Completed state [aodh-evaluator] at time 12:24:12.399302 duration_in_ms=218.24
2018-12-27 12:24:12,405 [salt.state       :1780][INFO    ][15325] Running state [aodh-notifier] at time 12:24:12.405205
2018-12-27 12:24:12,405 [salt.state       :1813][INFO    ][15325] Executing state service.running for [aodh-notifier]
2018-12-27 12:24:12,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-12-27 12:24:12,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-12-27 12:24:12,484 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-12-27 12:24:12,510 [salt.state       :300 ][INFO    ][15325] The service aodh-notifier is already running
2018-12-27 12:24:12,511 [salt.state       :1951][INFO    ][15325] Completed state [aodh-notifier] at time 12:24:12.510574 duration_in_ms=105.366
2018-12-27 12:24:12,511 [salt.state       :1780][INFO    ][15325] Running state [aodh-notifier] at time 12:24:12.511502
2018-12-27 12:24:12,513 [salt.state       :1813][INFO    ][15325] Executing state service.mod_watch for [aodh-notifier]
2018-12-27 12:24:12,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-12-27 12:24:12,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-12-27 12:24:15,776 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122415761716
2018-12-27 12:24:15,799 [salt.minion      :1432][INFO    ][22586] Starting a new job with PID 22586
2018-12-27 12:24:15,834 [salt.minion      :1711][INFO    ][22586] Returning information for job: 20181227122415761716
2018-12-27 12:24:25,911 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122425898646
2018-12-27 12:24:25,940 [salt.minion      :1432][INFO    ][22610] Starting a new job with PID 22610
2018-12-27 12:24:25,959 [salt.minion      :1711][INFO    ][22610] Returning information for job: 20181227122425898646
2018-12-27 12:24:27,698 [salt.state       :300 ][INFO    ][15325] {'aodh-notifier': True}
2018-12-27 12:24:27,698 [salt.state       :1951][INFO    ][15325] Completed state [aodh-notifier] at time 12:24:27.698891 duration_in_ms=15187.386
2018-12-27 12:24:27,707 [salt.state       :1780][INFO    ][15325] Running state [aodh-listener] at time 12:24:27.707591
2018-12-27 12:24:27,709 [salt.state       :1813][INFO    ][15325] Executing state service.running for [aodh-listener]
2018-12-27 12:24:27,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-12-27 12:24:27,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-12-27 12:24:27,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-12-27 12:24:27,786 [salt.state       :300 ][INFO    ][15325] The service aodh-listener is already running
2018-12-27 12:24:27,787 [salt.state       :1951][INFO    ][15325] Completed state [aodh-listener] at time 12:24:27.787065 duration_in_ms=79.471
2018-12-27 12:24:27,787 [salt.state       :1780][INFO    ][15325] Running state [aodh-listener] at time 12:24:27.787450
2018-12-27 12:24:27,787 [salt.state       :1813][INFO    ][15325] Executing state service.mod_watch for [aodh-listener]
2018-12-27 12:24:27,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-12-27 12:24:27,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][15325] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-12-27 12:24:36,077 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122436054517
2018-12-27 12:24:36,101 [salt.minion      :1432][INFO    ][22659] Starting a new job with PID 22659
2018-12-27 12:24:36,122 [salt.minion      :1711][INFO    ][22659] Returning information for job: 20181227122436054517
2018-12-27 12:24:42,951 [salt.state       :300 ][INFO    ][15325] {'aodh-listener': True}
2018-12-27 12:24:42,951 [salt.state       :1951][INFO    ][15325] Completed state [aodh-listener] at time 12:24:42.951602 duration_in_ms=15164.15
2018-12-27 12:24:42,962 [salt.minion      :1711][INFO    ][15325] Returning information for job: 20181227122314957440
2018-12-27 12:24:43,608 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command state.sls with jid 20181227122443593854
2018-12-27 12:24:43,632 [salt.minion      :1432][INFO    ][22689] Starting a new job with PID 22689
2018-12-27 12:24:49,509 [salt.state       :915 ][INFO    ][22689] Loading fresh modules for state activity
2018-12-27 12:24:49,564 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-12-27 12:24:49,600 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-12-27 12:24:49,772 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2018-12-27 12:24:51,787 [salt.state       :1780][INFO    ][22689] Running state [ceilometer-agent-central] at time 12:24:51.787665
2018-12-27 12:24:51,789 [salt.state       :1813][INFO    ][22689] Executing state pkg.installed for [ceilometer-agent-central]
2018-12-27 12:24:51,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:24:52,291 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-12-27 12:24:52,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-12-27 12:24:53,697 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122453684305
2018-12-27 12:24:53,714 [salt.minion      :1432][INFO    ][23009] Starting a new job with PID 23009
2018-12-27 12:24:53,731 [salt.minion      :1711][INFO    ][23009] Returning information for job: 20181227122453684305
2018-12-27 12:24:54,483 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:24:54,527 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-12-27 12:25:03,896 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122503877597
2018-12-27 12:25:03,924 [salt.minion      :1432][INFO    ][23678] Starting a new job with PID 23678
2018-12-27 12:25:03,954 [salt.minion      :1711][INFO    ][23678] Returning information for job: 20181227122503877597
2018-12-27 12:25:13,915 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122513899203
2018-12-27 12:25:13,929 [salt.minion      :1432][INFO    ][25044] Starting a new job with PID 25044
2018-12-27 12:25:13,949 [salt.minion      :1711][INFO    ][25044] Returning information for job: 20181227122513899203
2018-12-27 12:25:18,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:25:18,629 [salt.state       :300 ][INFO    ][22689] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'python-paramiko' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'libboost-thread1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'python-ply-yacc-3.5' changed from 'absent' to '1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-ply' changed from 'absent' to '3.7-1'
'python-pysmi' changed from 'absent' to '0.2.2-2~u16.04+mcp'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libboost-random1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libboost-iostreams1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libboost-system1.58.0' changed from 'absent' to '1.58.0+dfsg-5ubuntu3.1'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libvirt0' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'python2.7-paramiko' changed from 'absent' to '1'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.4.3-1~u16.04+mcp'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'python-oslo.rootwrap' changed from 'absent' to '5.14.1-1~u16.04+mcp'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'python-os-xenapi' changed from 'absent' to '0.3.3-1~u16.04+mcp'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-ply-lex-3.5' changed from 'absent' to '1'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '1.1.8-1.1ubuntu2'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'python-oslo-rootwrap' changed from 'absent' to '1'
'librados2' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '10.2.11-0ubuntu0.16.04.1'
'librdmacm1' changed from 'absent' to '1.0.21-1'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1.4~u16.04+mcp2'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'
'python-attr' changed from 'absent' to '15.2.0-1'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-pycryptodome' changed from 'absent' to '3.4.7-1.1~u16.04+mcp'
'python-jsonpath-rw-ext' changed from 'absent' to '0.1.9-1'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1.7~u16.04+mcp3'
'python2.7-ply' changed from 'absent' to '1'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-12-27 12:25:18,673 [salt.state       :915 ][INFO    ][22689] Loading fresh modules for state activity
2018-12-27 12:25:18,900 [salt.state       :1951][INFO    ][22689] Completed state [ceilometer-agent-central] at time 12:25:18.900565 duration_in_ms=27112.901
2018-12-27 12:25:18,908 [salt.state       :1780][INFO    ][22689] Running state [python-ceilometerclient] at time 12:25:18.908832
2018-12-27 12:25:18,909 [salt.state       :1813][INFO    ][22689] Executing state pkg.installed for [python-ceilometerclient]
2018-12-27 12:25:19,861 [salt.state       :300 ][INFO    ][22689] All specified packages are already installed
2018-12-27 12:25:19,861 [salt.state       :1951][INFO    ][22689] Completed state [python-ceilometerclient] at time 12:25:19.861869 duration_in_ms=953.036
2018-12-27 12:25:19,862 [salt.state       :1780][INFO    ][22689] Running state [ceilometer-agent-notification] at time 12:25:19.862163
2018-12-27 12:25:19,862 [salt.state       :1813][INFO    ][22689] Executing state pkg.installed for [ceilometer-agent-notification]
2018-12-27 12:25:19,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-12-27 12:25:19,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-12-27 12:25:23,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-12-27 12:25:24,051 [salt.state       :300 ][INFO    ][22689] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:11.0.1-1~u16.04+mcp5'

2018-12-27 12:25:24,065 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command saltutil.find_job with jid 20181227122524050224
2018-12-27 12:25:24,087 [salt.state       :915 ][INFO    ][22689] Loading fresh modules for state activity
2018-12-27 12:25:24,104 [salt.minion      :1432][INFO    ][25534] Starting a new job with PID 25534
2018-12-27 12:25:24,155 [salt.minion      :1711][INFO    ][25534] Returning information for job: 20181227122524050224
2018-12-27 12:25:24,178 [salt.state       :1951][INFO    ][22689] Completed state [ceilometer-agent-notification] at time 12:25:24.178215 duration_in_ms=4316.051
2018-12-27 12:25:24,183 [salt.state       :1780][INFO    ][22689] Running state [ceilometer_ssl_rabbitmq] at time 12:25:24.183470
2018-12-27 12:25:24,183 [salt.state       :1813][INFO    ][22689] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2018-12-27 12:25:24,184 [salt.state       :300 ][INFO    ][22689] Running ceilometer._ssl.rabbitmq
2018-12-27 12:25:24,184 [salt.state       :1951][INFO    ][22689] Completed state [ceilometer_ssl_rabbitmq] at time 12:25:24.184259 duration_in_ms=0.789
2018-12-27 12:25:24,187 [salt.state       :1780][INFO    ][22689] Running state [/etc/ceilometer/ceilometer.conf] at time 12:25:24.187729
2018-12-27 12:25:24,188 [salt.state       :1813][INFO    ][22689] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-12-27 12:25:24,248 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/ceilometer-server.conf.Debian'
2018-12-27 12:25:24,665 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-12-27 12:25:24,749 [salt.state       :300 ][INFO    ][22689] File changed:
--- 
+++ 
@@ -1,15 +1,329 @@
 [DEFAULT]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: To reduce polling agent load, samples are sent to the
-# notification agent in a batch. To gain higher throughput at the cost of load
-# set this to False. This option is deprecated, to disable batching set
-# batch_size = 0 in the polling group. (boolean value)
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
+
+#
+# From ceilometer
+#
+
+# To reduce polling agent load, samples are sent to the notification agent in a
+# batch. To gain higher throughput at the cost of load set this to False.
+# (boolean value)
 #batch_polled_samples = true
 
 # Inspector to use for inspecting the hypervisor layer. Known inspectors are
@@ -70,372 +384,6 @@
 # Minimum value: 1
 #max_parallel_requests = 64
 
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
-
 
 [coordination]
 
@@ -448,6 +396,7 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
@@ -529,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -593,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-DqEK8d/ceilometer-11.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -619,6 +522,7 @@
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -636,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -666,633 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If external locks are used,
-# a lock path must be set. (string value)
-#lock_path = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-# Enable asynchronous consumer commits (boolean value)
-#enable_auto_commit = false
-
-# The maximum number of records returned in a poll call (integer value)
-#max_poll_records = 500
-
-# Protocol used to communicate with brokers (string value)
-# Possible values:
-# PLAINTEXT - <No description provided>
-# SASL_PLAINTEXT - <No description provided>
-# SSL - <No description provided>
-# SASL_SSL - <No description provided>
-#security_protocol = PLAINTEXT
-
-# Mechanism when security protocol is SASL (string value)
-#sasl_mechanism = PLAIN
-
-# CA certificate PEM file used to verify the server certificate (string value)
-#ssl_cafile =
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Connect over SSL. (boolean value)
-# Deprecated group/name - [oslo_messaging_rabbit]/rabbit_use_ssl
-#ssl = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1307,10 +585,6 @@
 # pool with the same partitioning_group_prefix a disjoint subset of pollsters
 # should be loaded. (string value)
 #partitioning_group_prefix = <None>
-
-# Batch size of samples to send to notification agent, Set to 0 to disable
-# (integer value)
-#batch_size = 50
 
 
 [publisher]
@@ -1325,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1357,87 +632,115 @@
 #secret_key = <None>
 
 
-[rgw_client]
-
-#
-# From ceilometer
-#
-
-# Whether RGW uses implicit tenants or not. (boolean value)
-#implicit_tenants = false
-
-
 [service_credentials]
 
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1450,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1485,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (host address value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-12-27 12:25:24,760 [salt.state       :1951][INFO    ][22689] Completed state [/etc/ceilometer/ceilometer.conf] at time 12:25:24.760560 duration_in_ms=572.83
2018-12-27 12:25:24,760 [salt.state       :1780][INFO    ][22689] Running state [/etc/default/ceilometer-agent-central] at time 12:25:24.760929
2018-12-27 12:25:24,761 [salt.state       :1813][INFO    ][22689] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-12-27 12:25:24,804 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-12-27 12:25:24,829 [salt.state       :300 ][INFO    ][22689] File changed:
New file
2018-12-27 12:25:24,830 [salt.state       :1951][INFO    ][22689] Completed state [/etc/default/ceilometer-agent-central] at time 12:25:24.830240 duration_in_ms=69.311
2018-12-27 12:25:24,831 [salt.state       :1780][INFO    ][22689] Running state [/etc/default/ceilometer-agent-notification] at time 12:25:24.831089
2018-12-27 12:25:24,831 [salt.state       :1813][INFO    ][22689] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-12-27 12:25:24,876 [salt.state       :300 ][INFO    ][22689] File changed:
New file
2018-12-27 12:25:24,877 [salt.state       :1951][INFO    ][22689] Completed state [/etc/default/ceilometer-agent-notification] at time 12:25:24.877465 duration_in_ms=46.376
2018-12-27 12:25:24,888 [salt.state       :1780][INFO    ][22689] Running state [python-gnocchiclient] at time 12:25:24.888562
2018-12-27 12:25:24,888 [salt.state       :1813][INFO    ][22689] Executing state pkg.latest for [python-gnocchiclient]
2018-12-27 12:25:24,907 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-12-27 12:25:25,173 [salt.state       :300 ][INFO    ][22689] Package python-gnocchiclient is already up-to-date
2018-12-27 12:25:25,173 [salt.state       :1951][INFO    ][22689] Completed state [python-gnocchiclient] at time 12:25:25.173849 duration_in_ms=285.286
2018-12-27 12:25:25,177 [salt.state       :1780][INFO    ][22689] Running state [/etc/ceilometer/pipeline.yaml] at time 12:25:25.177434
2018-12-27 12:25:25,178 [salt.state       :1813][INFO    ][22689] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-12-27 12:25:25,237 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/pipeline.yaml'
2018-12-27 12:25:25,449 [salt.state       :300 ][INFO    ][22689] File changed:
New file
2018-12-27 12:25:25,453 [salt.state       :1951][INFO    ][22689] Completed state [/etc/ceilometer/pipeline.yaml] at time 12:25:25.452619 duration_in_ms=275.185
2018-12-27 12:25:25,457 [salt.state       :1780][INFO    ][22689] Running state [/etc/ceilometer/event_pipeline.yaml] at time 12:25:25.457507
2018-12-27 12:25:25,457 [salt.state       :1813][INFO    ][22689] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-12-27 12:25:25,473 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_pipeline.yaml'
2018-12-27 12:25:25,600 [salt.state       :300 ][INFO    ][22689] File changed:
New file
2018-12-27 12:25:25,601 [salt.state       :1951][INFO    ][22689] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 12:25:25.601166 duration_in_ms=143.659
2018-12-27 12:25:25,601 [salt.state       :1780][INFO    ][22689] Running state [/etc/ceilometer/event_definitions.yaml] at time 12:25:25.601571
2018-12-27 12:25:25,601 [salt.state       :1813][INFO    ][22689] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-12-27 12:25:25,632 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/event_definitions.yaml'
2018-12-27 12:25:25,646 [salt.state       :300 ][INFO    ][22689] File changed:
New file
2018-12-27 12:25:25,647 [salt.state       :1951][INFO    ][22689] Completed state [/etc/ceilometer/event_definitions.yaml] at time 12:25:25.647243 duration_in_ms=45.671
2018-12-27 12:25:25,648 [salt.state       :1780][INFO    ][22689] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 12:25:25.648010
2018-12-27 12:25:25,648 [salt.state       :1813][INFO    ][22689] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-12-27 12:25:25,666 [salt.fileclient  :1219][INFO    ][22689] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/rocky/gabbi_pipeline.yaml'
2018-12-27 12:25:25,676 [salt.state       :300 ][INFO    ][22689] File changed:
New file
2018-12-27 12:25:25,677 [salt.state       :1951][INFO    ][22689] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 12:25:25.677185 duration_in_ms=29.175
2018-12-27 12:25:26,337 [salt.state       :1780][INFO    ][22689] Running state [ceilometer-agent-central] at time 12:25:26.337075
2018-12-27 12:25:26,338 [salt.state       :1813][INFO    ][22689] Executing state service.running for [ceilometer-agent-central]
2018-12-27 12:25:26,339 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-12-27 12:25:26,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-27 12:25:26,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-27 12:25:26,393 [salt.state       :300 ][INFO    ][22689] The service ceilometer-agent-central is already running
2018-12-27 12:25:26,394 [salt.state       :1951][INFO    ][22689] Completed state [ceilometer-agent-central] at time 12:25:26.394065 duration_in_ms=56.988
2018-12-27 12:25:26,394 [salt.state       :1780][INFO    ][22689] Running state [ceilometer-agent-central] at time 12:25:26.394428
2018-12-27 12:25:26,394 [salt.state       :1813][INFO    ][22689] Executing state service.mod_watch for [ceilometer-agent-central]
2018-12-27 12:25:26,397 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-27 12:25:26,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-12-27 12:25:26,681 [salt.state       :300 ][INFO    ][22689] {'ceilometer-agent-central': True}
2018-12-27 12:25:26,682 [salt.state       :1951][INFO    ][22689] Completed state [ceilometer-agent-central] at time 12:25:26.682219 duration_in_ms=287.79
2018-12-27 12:25:26,687 [salt.state       :1780][INFO    ][22689] Running state [ceilometer-agent-notification] at time 12:25:26.687045
2018-12-27 12:25:26,687 [salt.state       :1813][INFO    ][22689] Executing state service.running for [ceilometer-agent-notification]
2018-12-27 12:25:26,689 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-12-27 12:25:26,730 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-27 12:25:26,753 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-27 12:25:26,771 [salt.state       :300 ][INFO    ][22689] The service ceilometer-agent-notification is already running
2018-12-27 12:25:26,773 [salt.state       :1951][INFO    ][22689] Completed state [ceilometer-agent-notification] at time 12:25:26.773358 duration_in_ms=86.309
2018-12-27 12:25:26,774 [salt.state       :1780][INFO    ][22689] Running state [ceilometer-agent-notification] at time 12:25:26.774183
2018-12-27 12:25:26,774 [salt.state       :1813][INFO    ][22689] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-12-27 12:25:26,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-27 12:25:26,793 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22689] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-12-27 12:25:26,986 [salt.state       :300 ][INFO    ][22689] {'ceilometer-agent-notification': True}
2018-12-27 12:25:26,987 [salt.state       :1951][INFO    ][22689] Completed state [ceilometer-agent-notification] at time 12:25:26.987378 duration_in_ms=213.191
2018-12-27 12:25:26,998 [salt.minion      :1711][INFO    ][22689] Returning information for job: 20181227122443593854
2018-12-27 12:29:34,390 [salt.minion      :1308][INFO    ][1494] User sudo_ubuntu Executing command cp.push_dir with jid 20181227122934372845
2018-12-27 12:29:34,428 [salt.minion      :1432][INFO    ][25713] Starting a new job with PID 25713
