2018-11-28 16:10:11,732 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:11,854 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:11,858 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:11,861 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:11,864 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,142 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,145 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,148 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,207 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,210 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,214 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,218 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,328 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,357 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,361 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,364 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,368 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,372 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,376 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,379 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,383 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,387 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,390 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,394 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,398 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,401 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,405 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,409 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,412 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,416 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,421 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,424 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,428 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,432 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,435 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,439 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,442 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,446 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,450 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,453 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,458 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,461 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,465 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,469 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,473 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,476 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,481 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,485 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,488 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,492 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,496 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,499 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,504 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,507 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,511 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,514 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:12,518 [salt.utils.decorators:82  ][ERROR   ][1747] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-28 16:10:31,804 [salt.utils.decorators:613 ][WARNING ][1747] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-28 16:10:34,761 [salt.loaded.int.states.file:2298][WARNING ][1747] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:10:36,447 [salt.loaded.int.states.file:2298][WARNING ][1747] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:10:38,811 [salt.loaded.int.states.file:2298][WARNING ][1747] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:10:43,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2987] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-11-28 16:10:43,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2987] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-11-28 16:10:43,268 [salt.utils.parsers:1051][WARNING ][1390] Minion received a SIGTERM. Exiting.
2018-11-28 16:10:44,207 [salt.cli.daemons :293 ][INFO    ][3044] Setting up the Salt Minion "mdb03.mcp-odl-ha.local"
2018-11-28 16:10:44,320 [salt.cli.daemons :82  ][INFO    ][3044] Starting up the Salt Minion
2018-11-28 16:10:44,321 [salt.utils.event :1017][INFO    ][3044] Starting pull socket on /var/run/salt/minion/minion_event_4701d3a5d9_pull.ipc
2018-11-28 16:10:45,094 [salt.minion      :976 ][INFO    ][3044] Creating minion process manager
2018-11-28 16:10:46,667 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3044] Executing command ['date', '+%z'] in directory '/root'
2018-11-28 16:10:46,694 [salt.utils.schedule:568 ][INFO    ][3044] Updating job settings for scheduled job: __mine_interval
2018-11-28 16:10:46,698 [salt.minion      :1108][INFO    ][3044] Added mine.update to scheduler
2018-11-28 16:10:46,705 [salt.minion      :1975][INFO    ][3044] Minion is starting as user 'root'
2018-11-28 16:10:46,722 [salt.minion      :2336][INFO    ][3044] Minion is ready to receive requests!
2018-11-28 16:11:20,809 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.apply with jid 20181128161120791910
2018-11-28 16:11:20,836 [salt.minion      :1432][INFO    ][3133] Starting a new job with PID 3133
2018-11-28 16:11:26,108 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161126090021
2018-11-28 16:11:26,133 [salt.minion      :1432][INFO    ][3138] Starting a new job with PID 3138
2018-11-28 16:11:26,159 [salt.minion      :1711][INFO    ][3138] Returning information for job: 20181128161126090021
2018-11-28 16:11:29,195 [salt.state       :915 ][INFO    ][3133] Loading fresh modules for state activity
2018-11-28 16:11:32,639 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-11-28 16:11:32,687 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-11-28 16:11:32,867 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-11-28 16:11:33,004 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-11-28 16:11:34,076 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2018-11-28 16:11:34,220 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2018-11-28 16:11:34,372 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2018-11-28 16:11:34,517 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2018-11-28 16:11:35,704 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-11-28 16:11:35,933 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-11-28 16:11:36,077 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-11-28 16:11:36,310 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161136293806
2018-11-28 16:11:36,332 [salt.minion      :1432][INFO    ][3167] Starting a new job with PID 3167
2018-11-28 16:11:36,357 [salt.minion      :1711][INFO    ][3167] Returning information for job: 20181128161136293806
2018-11-28 16:11:36,831 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-11-28 16:11:37,072 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-11-28 16:11:37,110 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-11-28 16:11:37,257 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-11-28 16:11:37,412 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-11-28 16:11:38,527 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-11-28 16:11:39,640 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-11-28 16:11:39,796 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-11-28 16:11:39,940 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2018-11-28 16:11:40,086 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-11-28 16:11:40,266 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2018-11-28 16:11:41,532 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-11-28 16:11:42,403 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-11-28 16:11:42,552 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-11-28 16:11:42,701 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-11-28 16:11:42,844 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-11-28 16:11:43,065 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-11-28 16:11:43,328 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-11-28 16:11:45,106 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-11-28 16:11:45,259 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2018-11-28 16:11:45,419 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-11-28 16:11:45,448 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-11-28 16:11:45,503 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-11-28 16:11:45,558 [salt.state       :1780][INFO    ][3133] Running state [/etc/environment] at time 16:11:45.557920
2018-11-28 16:11:45,559 [salt.state       :1813][INFO    ][3133] Executing state file.blockreplace for [/etc/environment]
2018-11-28 16:11:45,568 [salt.state       :300 ][INFO    ][3133] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-11-28 16:11:45,570 [salt.state       :1951][INFO    ][3133] Completed state [/etc/environment] at time 16:11:45.570333 duration_in_ms=12.414
2018-11-28 16:11:45,570 [salt.state       :1780][INFO    ][3133] Running state [/etc/profile.d] at time 16:11:45.570641
2018-11-28 16:11:45,570 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/profile.d]
2018-11-28 16:11:45,573 [salt.state       :300 ][INFO    ][3133] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-11-28 16:11:45,573 [salt.state       :1951][INFO    ][3133] Completed state [/etc/profile.d] at time 16:11:45.573187 duration_in_ms=2.546
2018-11-28 16:11:45,573 [salt.state       :1780][INFO    ][3133] Running state [/etc/bash.bashrc] at time 16:11:45.573426
2018-11-28 16:11:45,573 [salt.state       :1813][INFO    ][3133] Executing state file.blockreplace for [/etc/bash.bashrc]
2018-11-28 16:11:46,460 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161146439751
2018-11-28 16:11:46,488 [salt.minion      :1432][INFO    ][3222] Starting a new job with PID 3222
2018-11-28 16:11:46,507 [salt.minion      :1711][INFO    ][3222] Returning information for job: 20181128161146439751
2018-11-28 16:11:46,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['git', '--version'] in directory '/root'
2018-11-28 16:11:46,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2018-11-28 16:11:46,734 [salt.state       :300 ][INFO    ][3133] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-11-28 16:11:46,737 [salt.state       :1951][INFO    ][3133] Completed state [/etc/bash.bashrc] at time 16:11:46.737012 duration_in_ms=1163.585
2018-11-28 16:11:46,737 [salt.state       :1780][INFO    ][3133] Running state [/etc/profile] at time 16:11:46.737648
2018-11-28 16:11:46,739 [salt.state       :1813][INFO    ][3133] Executing state file.blockreplace for [/etc/profile]
2018-11-28 16:11:46,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'test -f /etc/profile' in directory '/root'
2018-11-28 16:11:46,764 [salt.state       :300 ][INFO    ][3133] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-11-28 16:11:46,764 [salt.state       :1951][INFO    ][3133] Completed state [/etc/profile] at time 16:11:46.764681 duration_in_ms=27.033
2018-11-28 16:11:46,765 [salt.state       :1780][INFO    ][3133] Running state [/etc/login.defs] at time 16:11:46.765061
2018-11-28 16:11:46,765 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/login.defs]
2018-11-28 16:11:46,791 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2018-11-28 16:11:46,925 [salt.state       :300 ][INFO    ][3133] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2018-11-28 16:11:46,926 [salt.state       :1951][INFO    ][3133] Completed state [/etc/login.defs] at time 16:11:46.926925 duration_in_ms=161.864
2018-11-28 16:11:46,937 [salt.state       :1780][INFO    ][3133] Running state [at] at time 16:11:46.937010
2018-11-28 16:11:46,937 [salt.state       :1813][INFO    ][3133] Executing state pkg.installed for [at]
2018-11-28 16:11:46,938 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:11:47,348 [salt.state       :300 ][INFO    ][3133] All specified packages are already installed
2018-11-28 16:11:47,349 [salt.state       :1951][INFO    ][3133] Completed state [at] at time 16:11:47.348966 duration_in_ms=411.955
2018-11-28 16:11:47,351 [salt.state       :1780][INFO    ][3133] Running state [atd] at time 16:11:47.351541
2018-11-28 16:11:47,351 [salt.state       :1813][INFO    ][3133] Executing state service.running for [atd]
2018-11-28 16:11:47,352 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2018-11-28 16:11:47,385 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2018-11-28 16:11:47,402 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2018-11-28 16:11:47,417 [salt.state       :300 ][INFO    ][3133] The service atd is already running
2018-11-28 16:11:47,417 [salt.state       :1951][INFO    ][3133] Completed state [atd] at time 16:11:47.417684 duration_in_ms=66.142
2018-11-28 16:11:47,420 [salt.state       :1780][INFO    ][3133] Running state [cron] at time 16:11:47.420908
2018-11-28 16:11:47,421 [salt.state       :1813][INFO    ][3133] Executing state pkg.installed for [cron]
2018-11-28 16:11:47,433 [salt.state       :300 ][INFO    ][3133] All specified packages are already installed
2018-11-28 16:11:47,434 [salt.state       :1951][INFO    ][3133] Completed state [cron] at time 16:11:47.434486 duration_in_ms=13.578
2018-11-28 16:11:47,435 [salt.state       :1780][INFO    ][3133] Running state [/etc/at.allow] at time 16:11:47.435539
2018-11-28 16:11:47,435 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/at.allow]
2018-11-28 16:11:48,087 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2018-11-28 16:11:48,102 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:11:48,102 [salt.state       :1951][INFO    ][3133] Completed state [/etc/at.allow] at time 16:11:48.102844 duration_in_ms=667.304
2018-11-28 16:11:48,103 [salt.state       :1780][INFO    ][3133] Running state [/etc/at.deny] at time 16:11:48.103147
2018-11-28 16:11:48,103 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/at.deny]
2018-11-28 16:11:48,103 [salt.state       :300 ][INFO    ][3133] {'removed': '/etc/at.deny'}
2018-11-28 16:11:48,104 [salt.state       :1951][INFO    ][3133] Completed state [/etc/at.deny] at time 16:11:48.104135 duration_in_ms=0.988
2018-11-28 16:11:48,106 [salt.state       :1780][INFO    ][3133] Running state [cron] at time 16:11:48.106701
2018-11-28 16:11:48,107 [salt.state       :1813][INFO    ][3133] Executing state service.running for [cron]
2018-11-28 16:11:48,107 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2018-11-28 16:11:48,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2018-11-28 16:11:48,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2018-11-28 16:11:48,166 [salt.state       :300 ][INFO    ][3133] The service cron is already running
2018-11-28 16:11:48,167 [salt.state       :1951][INFO    ][3133] Completed state [cron] at time 16:11:48.167348 duration_in_ms=61.565
2018-11-28 16:11:48,169 [salt.state       :1780][INFO    ][3133] Running state [/etc/cron.allow] at time 16:11:48.169405
2018-11-28 16:11:48,169 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/cron.allow]
2018-11-28 16:11:48,199 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:11:48,200 [salt.state       :1951][INFO    ][3133] Completed state [/etc/cron.allow] at time 16:11:48.200206 duration_in_ms=30.8
2018-11-28 16:11:48,200 [salt.state       :1780][INFO    ][3133] Running state [/etc/cron.deny] at time 16:11:48.200489
2018-11-28 16:11:48,200 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/cron.deny]
2018-11-28 16:11:48,201 [salt.state       :300 ][INFO    ][3133] File /etc/cron.deny is not present
2018-11-28 16:11:48,201 [salt.state       :1951][INFO    ][3133] Completed state [/etc/cron.deny] at time 16:11:48.201357 duration_in_ms=0.868
2018-11-28 16:11:48,202 [salt.state       :1780][INFO    ][3133] Running state [/etc/crontab] at time 16:11:48.202901
2018-11-28 16:11:48,203 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/crontab]
2018-11-28 16:11:48,204 [salt.state       :300 ][INFO    ][3133] {'mode': '0600'}
2018-11-28 16:11:48,204 [salt.state       :1951][INFO    ][3133] Completed state [/etc/crontab] at time 16:11:48.204396 duration_in_ms=1.495
2018-11-28 16:11:48,205 [salt.state       :1780][INFO    ][3133] Running state [/etc/cron.d] at time 16:11:48.205447
2018-11-28 16:11:48,205 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/cron.d]
2018-11-28 16:11:48,207 [salt.state       :300 ][INFO    ][3133] {'mode': '0600'}
2018-11-28 16:11:48,207 [salt.state       :1951][INFO    ][3133] Completed state [/etc/cron.d] at time 16:11:48.207284 duration_in_ms=1.837
2018-11-28 16:11:48,208 [salt.state       :1780][INFO    ][3133] Running state [/etc/cron.daily] at time 16:11:48.208327
2018-11-28 16:11:48,208 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/cron.daily]
2018-11-28 16:11:48,210 [salt.state       :300 ][INFO    ][3133] {'mode': '0600'}
2018-11-28 16:11:48,210 [salt.state       :1951][INFO    ][3133] Completed state [/etc/cron.daily] at time 16:11:48.210735 duration_in_ms=2.408
2018-11-28 16:11:48,211 [salt.state       :1780][INFO    ][3133] Running state [/etc/cron.hourly] at time 16:11:48.211800
2018-11-28 16:11:48,212 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/cron.hourly]
2018-11-28 16:11:48,213 [salt.state       :300 ][INFO    ][3133] {'mode': '0600'}
2018-11-28 16:11:48,214 [salt.state       :1951][INFO    ][3133] Completed state [/etc/cron.hourly] at time 16:11:48.214249 duration_in_ms=2.449
2018-11-28 16:11:48,215 [salt.state       :1780][INFO    ][3133] Running state [/etc/cron.monthly] at time 16:11:48.215315
2018-11-28 16:11:48,215 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/cron.monthly]
2018-11-28 16:11:48,216 [salt.state       :300 ][INFO    ][3133] {'mode': '0600'}
2018-11-28 16:11:48,217 [salt.state       :1951][INFO    ][3133] Completed state [/etc/cron.monthly] at time 16:11:48.217062 duration_in_ms=1.747
2018-11-28 16:11:48,218 [salt.state       :1780][INFO    ][3133] Running state [/etc/cron.weekly] at time 16:11:48.218144
2018-11-28 16:11:48,218 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/cron.weekly]
2018-11-28 16:11:48,219 [salt.state       :300 ][INFO    ][3133] {'mode': '0600'}
2018-11-28 16:11:48,220 [salt.state       :1951][INFO    ][3133] Completed state [/etc/cron.weekly] at time 16:11:48.220167 duration_in_ms=2.023
2018-11-28 16:11:48,224 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 16:11:48.224006
2018-11-28 16:11:48,224 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-11-28 16:11:48,248 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-11-28 16:11:48,273 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:11:48,274 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 16:11:48.274860 duration_in_ms=50.854
2018-11-28 16:11:48,275 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 16:11:48.275149
2018-11-28 16:11:48,275 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-11-28 16:11:48,302 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:11:48,302 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 16:11:48.302531 duration_in_ms=27.381
2018-11-28 16:11:48,304 [salt.state       :1780][INFO    ][3133] Running state [linux_repo_prereq_pkgs] at time 16:11:48.304477
2018-11-28 16:11:48,304 [salt.state       :1813][INFO    ][3133] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-11-28 16:11:48,316 [salt.state       :300 ][INFO    ][3133] All specified packages are already installed
2018-11-28 16:11:48,317 [salt.state       :1951][INFO    ][3133] Completed state [linux_repo_prereq_pkgs] at time 16:11:48.317022 duration_in_ms=12.544
2018-11-28 16:11:48,317 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 16:11:48.317326
2018-11-28 16:11:48,317 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-11-28 16:11:48,318 [salt.state       :300 ][INFO    ][3133] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-11-28 16:11:48,318 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 16:11:48.318231 duration_in_ms=0.905
2018-11-28 16:11:48,318 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 16:11:48.318462
2018-11-28 16:11:48,318 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-11-28 16:11:48,319 [salt.state       :300 ][INFO    ][3133] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-11-28 16:11:48,319 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 16:11:48.319195 duration_in_ms=0.733
2018-11-28 16:11:48,319 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 16:11:48.319424
2018-11-28 16:11:48,319 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-11-28 16:11:48,339 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-11-28 16:11:48,462 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:11:48,462 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 16:11:48.462572 duration_in_ms=143.147
2018-11-28 16:11:48,465 [salt.state       :1780][INFO    ][3133] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 16:11:48.465704
2018-11-28 16:11:48,466 [salt.state       :1813][INFO    ][3133] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-11-28 16:11:48,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-11-28 16:11:48,975 [salt.state       :300 ][INFO    ][3133] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-11-28 16:11:48,976 [salt.state       :1951][INFO    ][3133] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 16:11:48.976339 duration_in_ms=510.629
2018-11-28 16:11:48,976 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 16:11:48.976750
2018-11-28 16:11:48,977 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-11-28 16:11:48,977 [salt.state       :300 ][INFO    ][3133] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-11-28 16:11:48,978 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 16:11:48.978798 duration_in_ms=2.048
2018-11-28 16:11:48,979 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/preferences.d/uca] at time 16:11:48.979056
2018-11-28 16:11:48,979 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-11-28 16:11:49,136 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:11:49,136 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/preferences.d/uca] at time 16:11:49.136888 duration_in_ms=157.831
2018-11-28 16:11:49,137 [salt.state       :1780][INFO    ][3133] Running state [echo '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' | base64 -d | apt-key add -] at time 16:11:49.137202
2018-11-28 16:11:49,137 [salt.state       :1813][INFO    ][3133] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-11-28 16:11:49,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-11-28 16:11:49,322 [salt.state       :300 ][INFO    ][3133] {'pid': 3384, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-11-28 16:11:49,323 [salt.state       :1951][INFO    ][3133] Completed state [echo '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' | base64 -d | apt-key add -] at time 16:11:49.323176 duration_in_ms=185.973
2018-11-28 16:11:49,328 [salt.state       :1780][INFO    ][3133] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 16:11:49.328612
2018-11-28 16:11:49,329 [salt.state       :1813][INFO    ][3133] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-11-28 16:11:49,514 [salt.state       :300 ][INFO    ][3133] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-11-28 16:11:49,515 [salt.state       :1951][INFO    ][3133] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 16:11:49.515150 duration_in_ms=186.539
2018-11-28 16:11:49,515 [salt.state       :1780][INFO    ][3133] Running state [pkg.refresh_db] at time 16:11:49.515444
2018-11-28 16:11:49,515 [salt.state       :1813][INFO    ][3133] Executing state module.run for [pkg.refresh_db]
2018-11-28 16:11:49,516 [salt.utils.decorators:613 ][WARNING ][3133] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-28 16:11:49,516 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 16:11:54,063 [salt.state       :300 ][INFO    ][3133] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-11-28 16:11:54,064 [salt.state       :1951][INFO    ][3133] Completed state [pkg.refresh_db] at time 16:11:54.064622 duration_in_ms=4549.176
2018-11-28 16:11:54,066 [salt.state       :1780][INFO    ][3133] Running state [linux_extra_packages_removed] at time 16:11:54.066109
2018-11-28 16:11:54,066 [salt.state       :1813][INFO    ][3133] Executing state pkg.removed for [linux_extra_packages_removed]
2018-11-28 16:11:54,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2018-11-28 16:11:56,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:11:56,428 [salt.state       :300 ][INFO    ][3133] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2018-11-28 16:11:56,459 [salt.state       :915 ][INFO    ][3133] Loading fresh modules for state activity
2018-11-28 16:11:56,505 [salt.state       :1951][INFO    ][3133] Completed state [linux_extra_packages_removed] at time 16:11:56.505188 duration_in_ms=2439.079
2018-11-28 16:11:56,512 [salt.state       :1780][INFO    ][3133] Running state [linux_extra_packages_latest] at time 16:11:56.512265
2018-11-28 16:11:56,512 [salt.state       :1813][INFO    ][3133] Executing state pkg.latest for [linux_extra_packages_latest]
2018-11-28 16:11:57,186 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161156527744
2018-11-28 16:11:57,209 [salt.minion      :1432][INFO    ][4144] Starting a new job with PID 4144
2018-11-28 16:11:57,227 [salt.minion      :1711][INFO    ][4144] Returning information for job: 20181128161156527744
2018-11-28 16:11:57,379 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-11-28 16:11:57,571 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:11:57,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-11-28 16:12:00,574 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:12:00,617 [salt.state       :300 ][INFO    ][3133] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-11-28 16:12:00,646 [salt.state       :915 ][INFO    ][3133] Loading fresh modules for state activity
2018-11-28 16:12:00,694 [salt.state       :1951][INFO    ][3133] Completed state [linux_extra_packages_latest] at time 16:12:00.694573 duration_in_ms=4182.308
2018-11-28 16:12:00,699 [salt.state       :1780][INFO    ][3133] Running state [UTC] at time 16:12:00.699790
2018-11-28 16:12:00,700 [salt.state       :1813][INFO    ][3133] Executing state timezone.system for [UTC]
2018-11-28 16:12:00,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['timedatectl'] in directory '/root'
2018-11-28 16:12:00,759 [salt.state       :300 ][INFO    ][3133] Timezone UTC already set, UTC already set to UTC
2018-11-28 16:12:00,760 [salt.state       :1951][INFO    ][3133] Completed state [UTC] at time 16:12:00.760546 duration_in_ms=60.756
2018-11-28 16:12:00,764 [salt.state       :1780][INFO    ][3133] Running state [/etc/default/grub.d] at time 16:12:00.764477
2018-11-28 16:12:00,765 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/default/grub.d]
2018-11-28 16:12:00,771 [salt.state       :300 ][INFO    ][3133] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-11-28 16:12:00,772 [salt.state       :1951][INFO    ][3133] Completed state [/etc/default/grub.d] at time 16:12:00.772348 duration_in_ms=7.87
2018-11-28 16:12:00,773 [salt.state       :1780][INFO    ][3133] Running state [update-grub] at time 16:12:00.773437
2018-11-28 16:12:00,773 [salt.state       :1813][INFO    ][3133] Executing state cmd.wait for [update-grub]
2018-11-28 16:12:00,774 [salt.state       :300 ][INFO    ][3133] No changes made for update-grub
2018-11-28 16:12:00,775 [salt.state       :1951][INFO    ][3133] Completed state [update-grub] at time 16:12:00.775009 duration_in_ms=1.572
2018-11-28 16:12:00,778 [salt.state       :1780][INFO    ][3133] Running state [/boot/grub/grub.cfg] at time 16:12:00.777512
2018-11-28 16:12:00,778 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/boot/grub/grub.cfg]
2018-11-28 16:12:01,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-11-28 16:12:01,918 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:01,920 [salt.state       :300 ][INFO    ][3133] {'mode': '0400'}
2018-11-28 16:12:01,921 [salt.state       :1951][INFO    ][3133] Completed state [/boot/grub/grub.cfg] at time 16:12:01.921042 duration_in_ms=1143.528
2018-11-28 16:12:01,922 [salt.state       :1780][INFO    ][3133] Running state [nf_conntrack] at time 16:12:01.921990
2018-11-28 16:12:01,922 [salt.state       :1813][INFO    ][3133] Executing state kmod.present for [nf_conntrack]
2018-11-28 16:12:01,923 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'lsmod' in directory '/root'
2018-11-28 16:12:02,317 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'lsmod' in directory '/root'
2018-11-28 16:12:02,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-11-28 16:12:02,355 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'lsmod' in directory '/root'
2018-11-28 16:12:02,473 [salt.state       :300 ][INFO    ][3133] {'nf_conntrack': 'loaded'}
2018-11-28 16:12:02,474 [salt.state       :1951][INFO    ][3133] Completed state [nf_conntrack] at time 16:12:02.474578 duration_in_ms=552.587
2018-11-28 16:12:02,475 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d] at time 16:12:02.475242
2018-11-28 16:12:02,475 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/modprobe.d]
2018-11-28 16:12:02,477 [salt.state       :300 ][INFO    ][3133] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2018-11-28 16:12:02,478 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d] at time 16:12:02.478303 duration_in_ms=3.061
2018-11-28 16:12:02,480 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/hfsplus.conf] at time 16:12:02.480723
2018-11-28 16:12:02,481 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2018-11-28 16:12:02,502 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2018-11-28 16:12:02,661 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:02,661 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/hfsplus.conf] at time 16:12:02.661303 duration_in_ms=180.579
2018-11-28 16:12:02,663 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/rds.conf] at time 16:12:02.663509
2018-11-28 16:12:02,663 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2018-11-28 16:12:02,821 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:02,823 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/rds.conf] at time 16:12:02.822982 duration_in_ms=159.472
2018-11-28 16:12:02,824 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/cramfs.conf] at time 16:12:02.824452
2018-11-28 16:12:02,824 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2018-11-28 16:12:02,989 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:02,990 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/cramfs.conf] at time 16:12:02.990248 duration_in_ms=165.796
2018-11-28 16:12:02,991 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/freevxfs.conf] at time 16:12:02.991781
2018-11-28 16:12:02,992 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2018-11-28 16:12:03,155 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:03,156 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/freevxfs.conf] at time 16:12:03.156027 duration_in_ms=164.245
2018-11-28 16:12:03,157 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/hfs.conf] at time 16:12:03.157887
2018-11-28 16:12:03,158 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2018-11-28 16:12:03,439 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:03,439 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/hfs.conf] at time 16:12:03.439513 duration_in_ms=281.626
2018-11-28 16:12:03,441 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/squashfs.conf] at time 16:12:03.441119
2018-11-28 16:12:03,441 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2018-11-28 16:12:03,601 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:03,601 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/squashfs.conf] at time 16:12:03.601355 duration_in_ms=160.235
2018-11-28 16:12:03,603 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/udf.conf] at time 16:12:03.603021
2018-11-28 16:12:03,603 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2018-11-28 16:12:03,764 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:03,764 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/udf.conf] at time 16:12:03.764619 duration_in_ms=161.598
2018-11-28 16:12:03,767 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/vfat.conf] at time 16:12:03.767395
2018-11-28 16:12:03,767 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2018-11-28 16:12:03,927 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:03,927 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/vfat.conf] at time 16:12:03.927722 duration_in_ms=160.326
2018-11-28 16:12:03,929 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/sctp.conf] at time 16:12:03.929350
2018-11-28 16:12:03,929 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2018-11-28 16:12:04,093 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:04,093 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/sctp.conf] at time 16:12:04.093422 duration_in_ms=164.071
2018-11-28 16:12:04,095 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/jffs2.conf] at time 16:12:04.095370
2018-11-28 16:12:04,095 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2018-11-28 16:12:04,266 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:04,266 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/jffs2.conf] at time 16:12:04.266571 duration_in_ms=171.2
2018-11-28 16:12:04,268 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/tipc.conf] at time 16:12:04.268205
2018-11-28 16:12:04,268 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2018-11-28 16:12:04,437 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:04,438 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/tipc.conf] at time 16:12:04.437992 duration_in_ms=169.786
2018-11-28 16:12:04,439 [salt.state       :1780][INFO    ][3133] Running state [/etc/modprobe.d/dccp.conf] at time 16:12:04.439628
2018-11-28 16:12:04,439 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2018-11-28 16:12:04,603 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:04,603 [salt.state       :1951][INFO    ][3133] Completed state [/etc/modprobe.d/dccp.conf] at time 16:12:04.603457 duration_in_ms=163.828
2018-11-28 16:12:04,603 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_congestion_control] at time 16:12:04.603741
2018-11-28 16:12:04,604 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-11-28 16:12:04,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-11-28 16:12:04,633 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-11-28 16:12:04,635 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_congestion_control] at time 16:12:04.635027 duration_in_ms=31.285
2018-11-28 16:12:04,635 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_slow_start_after_idle] at time 16:12:04.635783
2018-11-28 16:12:04,636 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-11-28 16:12:04,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-11-28 16:12:04,656 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-11-28 16:12:04,658 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 16:12:04.657901 duration_in_ms=22.117
2018-11-28 16:12:04,658 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 16:12:04.658724
2018-11-28 16:12:04,659 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2018-11-28 16:12:04,661 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2018-11-28 16:12:04,679 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2018-11-28 16:12:04,680 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 16:12:04.680397 duration_in_ms=21.672
2018-11-28 16:12:04,681 [salt.state       :1780][INFO    ][3133] Running state [net.nf_conntrack_max] at time 16:12:04.681160
2018-11-28 16:12:04,681 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.nf_conntrack_max]
2018-11-28 16:12:04,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-11-28 16:12:04,700 [salt.state       :300 ][INFO    ][3133] {'net.nf_conntrack_max': 1048576}
2018-11-28 16:12:04,702 [salt.state       :1951][INFO    ][3133] Completed state [net.nf_conntrack_max] at time 16:12:04.702274 duration_in_ms=21.114
2018-11-28 16:12:04,703 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 16:12:04.703023
2018-11-28 16:12:04,703 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2018-11-28 16:12:04,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2018-11-28 16:12:04,723 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2018-11-28 16:12:04,724 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 16:12:04.724174 duration_in_ms=21.152
2018-11-28 16:12:04,725 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.default.log_martians] at time 16:12:04.724952
2018-11-28 16:12:04,725 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2018-11-28 16:12:04,727 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2018-11-28 16:12:04,744 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.default.log_martians': 1}
2018-11-28 16:12:04,745 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.default.log_martians] at time 16:12:04.745317 duration_in_ms=20.364
2018-11-28 16:12:04,746 [salt.state       :1780][INFO    ][3133] Running state [net.core.somaxconn] at time 16:12:04.746439
2018-11-28 16:12:04,747 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.core.somaxconn]
2018-11-28 16:12:04,748 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-11-28 16:12:04,768 [salt.state       :300 ][INFO    ][3133] {'net.core.somaxconn': 4096}
2018-11-28 16:12:04,769 [salt.state       :1951][INFO    ][3133] Completed state [net.core.somaxconn] at time 16:12:04.769592 duration_in_ms=23.153
2018-11-28 16:12:04,770 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.all.send_redirects] at time 16:12:04.770366
2018-11-28 16:12:04,771 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2018-11-28 16:12:04,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2018-11-28 16:12:04,791 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.all.send_redirects': 0}
2018-11-28 16:12:04,792 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.all.send_redirects] at time 16:12:04.792828 duration_in_ms=22.461
2018-11-28 16:12:04,793 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_tw_reuse] at time 16:12:04.793663
2018-11-28 16:12:04,794 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-11-28 16:12:04,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-11-28 16:12:04,814 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_tw_reuse': 1}
2018-11-28 16:12:04,815 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_tw_reuse] at time 16:12:04.815749 duration_in_ms=22.086
2018-11-28 16:12:04,816 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.default.rp_filter] at time 16:12:04.816512
2018-11-28 16:12:04,817 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2018-11-28 16:12:04,819 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2018-11-28 16:12:04,840 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.default.rp_filter': 1}
2018-11-28 16:12:04,841 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.default.rp_filter] at time 16:12:04.841047 duration_in_ms=24.534
2018-11-28 16:12:04,842 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_fin_timeout] at time 16:12:04.842231
2018-11-28 16:12:04,842 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-11-28 16:12:04,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-11-28 16:12:04,865 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_fin_timeout': 30}
2018-11-28 16:12:04,866 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_fin_timeout] at time 16:12:04.866667 duration_in_ms=24.435
2018-11-28 16:12:04,867 [salt.state       :1780][INFO    ][3133] Running state [kernel.panic] at time 16:12:04.867430
2018-11-28 16:12:04,868 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [kernel.panic]
2018-11-28 16:12:04,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-11-28 16:12:04,888 [salt.state       :300 ][INFO    ][3133] {'kernel.panic': 60}
2018-11-28 16:12:04,890 [salt.state       :1951][INFO    ][3133] Completed state [kernel.panic] at time 16:12:04.889934 duration_in_ms=22.504
2018-11-28 16:12:04,890 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_keepalive_probes] at time 16:12:04.890757
2018-11-28 16:12:04,891 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-11-28 16:12:04,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-11-28 16:12:04,911 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_keepalive_probes': 8}
2018-11-28 16:12:04,912 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_keepalive_probes] at time 16:12:04.912109 duration_in_ms=21.351
2018-11-28 16:12:04,912 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.all.log_martians] at time 16:12:04.912863
2018-11-28 16:12:04,913 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2018-11-28 16:12:04,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2018-11-28 16:12:04,935 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.all.log_martians': 1}
2018-11-28 16:12:04,936 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.all.log_martians] at time 16:12:04.936158 duration_in_ms=23.295
2018-11-28 16:12:04,936 [salt.state       :1780][INFO    ][3133] Running state [fs.suid_dumpable] at time 16:12:04.936915
2018-11-28 16:12:04,937 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [fs.suid_dumpable]
2018-11-28 16:12:04,939 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2018-11-28 16:12:04,958 [salt.state       :300 ][INFO    ][3133] {'fs.suid_dumpable': 0}
2018-11-28 16:12:04,959 [salt.state       :1951][INFO    ][3133] Completed state [fs.suid_dumpable] at time 16:12:04.959117 duration_in_ms=22.201
2018-11-28 16:12:04,959 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.default.accept_redirects] at time 16:12:04.959850
2018-11-28 16:12:04,960 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2018-11-28 16:12:04,962 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2018-11-28 16:12:04,978 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.default.accept_redirects': 0}
2018-11-28 16:12:04,979 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.default.accept_redirects] at time 16:12:04.979129 duration_in_ms=19.28
2018-11-28 16:12:04,979 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.default.secure_redirects] at time 16:12:04.979856
2018-11-28 16:12:04,980 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2018-11-28 16:12:04,982 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2018-11-28 16:12:04,999 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.default.secure_redirects': 0}
2018-11-28 16:12:05,000 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.default.secure_redirects] at time 16:12:05.000255 duration_in_ms=20.399
2018-11-28 16:12:05,001 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.default.accept_source_route] at time 16:12:05.000998
2018-11-28 16:12:05,002 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2018-11-28 16:12:05,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2018-11-28 16:12:05,020 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.default.accept_source_route': 0}
2018-11-28 16:12:05,021 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.default.accept_source_route] at time 16:12:05.021728 duration_in_ms=20.729
2018-11-28 16:12:05,022 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_keepalive_intvl] at time 16:12:05.022501
2018-11-28 16:12:05,023 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-11-28 16:12:05,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-11-28 16:12:05,042 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-11-28 16:12:05,043 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_keepalive_intvl] at time 16:12:05.043655 duration_in_ms=21.153
2018-11-28 16:12:05,044 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_keepalive_time] at time 16:12:05.044390
2018-11-28 16:12:05,045 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-11-28 16:12:05,047 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-11-28 16:12:05,066 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_keepalive_time': 30}
2018-11-28 16:12:05,067 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_keepalive_time] at time 16:12:05.067785 duration_in_ms=23.394
2018-11-28 16:12:05,068 [salt.state       :1780][INFO    ][3133] Running state [kernel.randomize_va_space] at time 16:12:05.068553
2018-11-28 16:12:05,069 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [kernel.randomize_va_space]
2018-11-28 16:12:05,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2018-11-28 16:12:05,090 [salt.state       :300 ][INFO    ][3133] {'kernel.randomize_va_space': 2}
2018-11-28 16:12:05,091 [salt.state       :1951][INFO    ][3133] Completed state [kernel.randomize_va_space] at time 16:12:05.091827 duration_in_ms=23.273
2018-11-28 16:12:05,092 [salt.state       :1780][INFO    ][3133] Running state [fs.file-max] at time 16:12:05.092581
2018-11-28 16:12:05,093 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [fs.file-max]
2018-11-28 16:12:05,095 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-11-28 16:12:05,115 [salt.state       :300 ][INFO    ][3133] {'fs.file-max': 124165}
2018-11-28 16:12:05,116 [salt.state       :1951][INFO    ][3133] Completed state [fs.file-max] at time 16:12:05.116676 duration_in_ms=24.094
2018-11-28 16:12:05,117 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_syncookies] at time 16:12:05.117420
2018-11-28 16:12:05,118 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2018-11-28 16:12:05,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2018-11-28 16:12:05,140 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_syncookies': 1}
2018-11-28 16:12:05,141 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_syncookies] at time 16:12:05.141008 duration_in_ms=23.587
2018-11-28 16:12:05,141 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_max_syn_backlog] at time 16:12:05.141769
2018-11-28 16:12:05,142 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-11-28 16:12:05,144 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-11-28 16:12:05,163 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-11-28 16:12:05,165 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_max_syn_backlog] at time 16:12:05.164946 duration_in_ms=23.176
2018-11-28 16:12:05,165 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.all.rp_filter] at time 16:12:05.165717
2018-11-28 16:12:05,166 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2018-11-28 16:12:05,168 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2018-11-28 16:12:05,187 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.all.rp_filter': 1}
2018-11-28 16:12:05,188 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.all.rp_filter] at time 16:12:05.188059 duration_in_ms=22.342
2018-11-28 16:12:05,188 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.all.accept_source_route] at time 16:12:05.188794
2018-11-28 16:12:05,189 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2018-11-28 16:12:05,191 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2018-11-28 16:12:05,208 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.all.accept_source_route': 0}
2018-11-28 16:12:05,210 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.all.accept_source_route] at time 16:12:05.210257 duration_in_ms=21.462
2018-11-28 16:12:05,211 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.tcp_retries2] at time 16:12:05.211051
2018-11-28 16:12:05,211 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-11-28 16:12:05,213 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-11-28 16:12:05,230 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.tcp_retries2': 5}
2018-11-28 16:12:05,231 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.tcp_retries2] at time 16:12:05.231308 duration_in_ms=20.256
2018-11-28 16:12:05,232 [salt.state       :1780][INFO    ][3133] Running state [net.core.netdev_max_backlog] at time 16:12:05.232049
2018-11-28 16:12:05,232 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-11-28 16:12:05,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-11-28 16:12:05,251 [salt.state       :300 ][INFO    ][3133] {'net.core.netdev_max_backlog': 261144}
2018-11-28 16:12:05,252 [salt.state       :1951][INFO    ][3133] Completed state [net.core.netdev_max_backlog] at time 16:12:05.252686 duration_in_ms=20.637
2018-11-28 16:12:05,254 [salt.state       :1780][INFO    ][3133] Running state [vm.swappiness] at time 16:12:05.253416
2018-11-28 16:12:05,254 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [vm.swappiness]
2018-11-28 16:12:05,256 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-11-28 16:12:05,274 [salt.state       :300 ][INFO    ][3133] {'vm.swappiness': 10}
2018-11-28 16:12:05,275 [salt.state       :1951][INFO    ][3133] Completed state [vm.swappiness] at time 16:12:05.274905 duration_in_ms=21.49
2018-11-28 16:12:05,275 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.all.secure_redirects] at time 16:12:05.275625
2018-11-28 16:12:05,276 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2018-11-28 16:12:05,278 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2018-11-28 16:12:05,296 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.all.secure_redirects': 0}
2018-11-28 16:12:05,297 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.all.secure_redirects] at time 16:12:05.297450 duration_in_ms=21.824
2018-11-28 16:12:05,298 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.neigh.default.gc_thresh1] at time 16:12:05.298253
2018-11-28 16:12:05,298 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-11-28 16:12:05,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-11-28 16:12:05,318 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-11-28 16:12:05,319 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 16:12:05.318995 duration_in_ms=20.742
2018-11-28 16:12:05,319 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.neigh.default.gc_thresh2] at time 16:12:05.319688
2018-11-28 16:12:05,320 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-11-28 16:12:05,321 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-11-28 16:12:05,339 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-11-28 16:12:05,340 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 16:12:05.340269 duration_in_ms=20.581
2018-11-28 16:12:05,341 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.neigh.default.gc_thresh3] at time 16:12:05.341052
2018-11-28 16:12:05,342 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-11-28 16:12:05,343 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-11-28 16:12:05,360 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-11-28 16:12:05,361 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 16:12:05.361238 duration_in_ms=20.185
2018-11-28 16:12:05,363 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.default.send_redirects] at time 16:12:05.363422
2018-11-28 16:12:05,364 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2018-11-28 16:12:05,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2018-11-28 16:12:05,383 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.default.send_redirects': 0}
2018-11-28 16:12:05,384 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.default.send_redirects] at time 16:12:05.384383 duration_in_ms=20.96
2018-11-28 16:12:05,385 [salt.state       :1780][INFO    ][3133] Running state [net.ipv4.conf.all.accept_redirects] at time 16:12:05.385112
2018-11-28 16:12:05,386 [salt.state       :1813][INFO    ][3133] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2018-11-28 16:12:05,388 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2018-11-28 16:12:05,403 [salt.state       :300 ][INFO    ][3133] {'net.ipv4.conf.all.accept_redirects': 0}
2018-11-28 16:12:05,404 [salt.state       :1951][INFO    ][3133] Completed state [net.ipv4.conf.all.accept_redirects] at time 16:12:05.404322 duration_in_ms=19.209
2018-11-28 16:12:05,405 [salt.state       :1780][INFO    ][3133] Running state [linux_sysfs_package] at time 16:12:05.405322
2018-11-28 16:12:05,406 [salt.state       :1813][INFO    ][3133] Executing state pkg.installed for [linux_sysfs_package]
2018-11-28 16:12:05,441 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-11-28 16:12:05,575 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 16:12:06,606 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161206587889
2018-11-28 16:12:06,632 [salt.minion      :1432][INFO    ][4736] Starting a new job with PID 4736
2018-11-28 16:12:06,656 [salt.minion      :1711][INFO    ][4736] Returning information for job: 20181128161206587889
2018-11-28 16:12:07,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:12:07,682 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-11-28 16:12:11,543 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:12:11,594 [salt.state       :300 ][INFO    ][3133] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-11-28 16:12:11,622 [salt.state       :915 ][INFO    ][3133] Loading fresh modules for state activity
2018-11-28 16:12:11,674 [salt.state       :1951][INFO    ][3133] Completed state [linux_sysfs_package] at time 16:12:11.674660 duration_in_ms=6269.338
2018-11-28 16:12:11,681 [salt.state       :1780][INFO    ][3133] Running state [/etc/sysfs.d] at time 16:12:11.681549
2018-11-28 16:12:11,681 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/etc/sysfs.d]
2018-11-28 16:12:11,688 [salt.state       :300 ][INFO    ][3133] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-11-28 16:12:11,688 [salt.state       :1951][INFO    ][3133] Completed state [/etc/sysfs.d] at time 16:12:11.688211 duration_in_ms=6.662
2018-11-28 16:12:11,689 [salt.state       :1780][INFO    ][3133] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 16:12:11.689880
2018-11-28 16:12:11,690 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2018-11-28 16:12:11,712 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/sysfs.conf'
2018-11-28 16:12:11,732 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:11,734 [salt.state       :1951][INFO    ][3133] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 16:12:11.733980 duration_in_ms=44.1
2018-11-28 16:12:11,735 [salt.state       :1780][INFO    ][3133] Running state [sysfs.write] at time 16:12:11.735129
2018-11-28 16:12:11,735 [salt.state       :1813][INFO    ][3133] Executing state module.run for [sysfs.write]
2018-11-28 16:12:11,736 [salt.utils.decorators:613 ][WARNING ][3133] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-28 16:12:11,739 [salt.state       :300 ][INFO    ][3133] {'ret': True}
2018-11-28 16:12:11,739 [salt.state       :1951][INFO    ][3133] Completed state [sysfs.write] at time 16:12:11.739535 duration_in_ms=4.405
2018-11-28 16:12:12,335 [salt.state       :1780][INFO    ][3133] Running state [ondemand] at time 16:12:12.335536
2018-11-28 16:12:12,336 [salt.state       :1813][INFO    ][3133] Executing state service.dead for [ondemand]
2018-11-28 16:12:12,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-11-28 16:12:12,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-28 16:12:12,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-28 16:12:12,403 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-11-28 16:12:12,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-28 16:12:12,493 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-28 16:12:12,518 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-28 16:12:12,544 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-11-28 16:12:12,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-28 16:12:12,734 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'runlevel' in directory '/root'
2018-11-28 16:12:12,751 [salt.state       :300 ][INFO    ][3133] {'ondemand': True}
2018-11-28 16:12:12,752 [salt.state       :1951][INFO    ][3133] Completed state [ondemand] at time 16:12:12.752153 duration_in_ms=416.617
2018-11-28 16:12:12,753 [salt.state       :1780][INFO    ][3133] Running state [en_US.UTF-8] at time 16:12:12.753839
2018-11-28 16:12:12,754 [salt.state       :1813][INFO    ][3133] Executing state locale.present for [en_US.UTF-8]
2018-11-28 16:12:12,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'locale -a' in directory '/root'
2018-11-28 16:12:12,770 [salt.state       :300 ][INFO    ][3133] Locale en_US.UTF-8 is already present
2018-11-28 16:12:12,771 [salt.state       :1951][INFO    ][3133] Completed state [en_US.UTF-8] at time 16:12:12.771086 duration_in_ms=17.246
2018-11-28 16:12:12,774 [salt.state       :1780][INFO    ][3133] Running state [en_US.UTF-8] at time 16:12:12.774698
2018-11-28 16:12:12,775 [salt.state       :1813][INFO    ][3133] Executing state locale.system for [en_US.UTF-8]
2018-11-28 16:12:12,775 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'localectl' in directory '/root'
2018-11-28 16:12:12,828 [salt.state       :300 ][INFO    ][3133] System locale en_US.UTF-8 already set
2018-11-28 16:12:12,829 [salt.state       :1951][INFO    ][3133] Completed state [en_US.UTF-8] at time 16:12:12.829326 duration_in_ms=54.628
2018-11-28 16:12:12,831 [salt.state       :1780][INFO    ][3133] Running state [root] at time 16:12:12.831071
2018-11-28 16:12:12,831 [salt.state       :1813][INFO    ][3133] Executing state group.present for [root]
2018-11-28 16:12:12,831 [salt.state       :300 ][INFO    ][3133] Group root is present and up to date
2018-11-28 16:12:12,832 [salt.state       :1951][INFO    ][3133] Completed state [root] at time 16:12:12.832162 duration_in_ms=1.091
2018-11-28 16:12:12,835 [salt.state       :1780][INFO    ][3133] Running state [root] at time 16:12:12.835665
2018-11-28 16:12:12,835 [salt.state       :1813][INFO    ][3133] Executing state user.present for [root]
2018-11-28 16:12:12,842 [salt.state       :300 ][INFO    ][3133] User root is present and up to date
2018-11-28 16:12:12,843 [salt.state       :1951][INFO    ][3133] Completed state [root] at time 16:12:12.843064 duration_in_ms=7.399
2018-11-28 16:12:12,844 [salt.state       :1780][INFO    ][3133] Running state [/root] at time 16:12:12.844687
2018-11-28 16:12:12,844 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/root]
2018-11-28 16:12:12,846 [salt.state       :300 ][INFO    ][3133] Directory /root is in the correct state
Directory /root updated
2018-11-28 16:12:12,846 [salt.state       :1951][INFO    ][3133] Completed state [/root] at time 16:12:12.846689 duration_in_ms=2.002
2018-11-28 16:12:12,846 [salt.state       :1780][INFO    ][3133] Running state [/etc/sudoers.d/90-salt-user-root] at time 16:12:12.846922
2018-11-28 16:12:12,847 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-11-28 16:12:12,847 [salt.state       :300 ][INFO    ][3133] File /etc/sudoers.d/90-salt-user-root is not present
2018-11-28 16:12:12,847 [salt.state       :1951][INFO    ][3133] Completed state [/etc/sudoers.d/90-salt-user-root] at time 16:12:12.847679 duration_in_ms=0.757
2018-11-28 16:12:12,847 [salt.state       :1780][INFO    ][3133] Running state [ubuntu] at time 16:12:12.847912
2018-11-28 16:12:12,848 [salt.state       :1813][INFO    ][3133] Executing state group.present for [ubuntu]
2018-11-28 16:12:12,848 [salt.state       :300 ][INFO    ][3133] Group ubuntu is present and up to date
2018-11-28 16:12:12,848 [salt.state       :1951][INFO    ][3133] Completed state [ubuntu] at time 16:12:12.848689 duration_in_ms=0.777
2018-11-28 16:12:12,850 [salt.state       :1780][INFO    ][3133] Running state [ubuntu] at time 16:12:12.850593
2018-11-28 16:12:12,850 [salt.state       :1813][INFO    ][3133] Executing state user.present for [ubuntu]
2018-11-28 16:12:12,854 [salt.state       :300 ][INFO    ][3133] {'passwd': 'XXX-REDACTED-XXX'}
2018-11-28 16:12:12,854 [salt.state       :1951][INFO    ][3133] Completed state [ubuntu] at time 16:12:12.854726 duration_in_ms=4.132
2018-11-28 16:12:12,856 [salt.state       :1780][INFO    ][3133] Running state [/home/ubuntu] at time 16:12:12.856294
2018-11-28 16:12:12,856 [salt.state       :1813][INFO    ][3133] Executing state file.directory for [/home/ubuntu]
2018-11-28 16:12:12,857 [salt.state       :300 ][INFO    ][3133] {'mode': '0700'}
2018-11-28 16:12:12,857 [salt.state       :1951][INFO    ][3133] Completed state [/home/ubuntu] at time 16:12:12.857868 duration_in_ms=1.574
2018-11-28 16:12:12,859 [salt.state       :1780][INFO    ][3133] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 16:12:12.859335
2018-11-28 16:12:12,859 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-11-28 16:12:12,882 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-11-28 16:12:12,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.xhxFEK' in directory '/root'
2018-11-28 16:12:12,923 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:12,923 [salt.state       :1951][INFO    ][3133] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 16:12:12.923440 duration_in_ms=64.104
2018-11-28 16:12:12,923 [salt.state       :1780][INFO    ][3133] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 16:12:12.923848
2018-11-28 16:12:12,924 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2018-11-28 16:12:12,946 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-11-28 16:12:13,083 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:13,083 [salt.state       :1951][INFO    ][3133] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 16:12:13.083275 duration_in_ms=159.427
2018-11-28 16:12:13,083 [salt.state       :1780][INFO    ][3133] Running state [/etc/security/limits.d/90-salt-default.conf] at time 16:12:13.083548
2018-11-28 16:12:13,083 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-11-28 16:12:13,225 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:13,226 [salt.state       :1951][INFO    ][3133] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 16:12:13.226139 duration_in_ms=142.59
2018-11-28 16:12:13,226 [salt.state       :1780][INFO    ][3133] Running state [autofs] at time 16:12:13.226440
2018-11-28 16:12:13,226 [salt.state       :1813][INFO    ][3133] Executing state service.disabled for [autofs]
2018-11-28 16:12:13,227 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2018-11-28 16:12:13,249 [salt.state       :300 ][INFO    ][3133] The named service autofs is not available
2018-11-28 16:12:13,250 [salt.state       :1951][INFO    ][3133] Completed state [autofs] at time 16:12:13.250256 duration_in_ms=23.815
2018-11-28 16:12:13,250 [salt.state       :1780][INFO    ][3133] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 16:12:13.250724
2018-11-28 16:12:13,251 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-11-28 16:12:13,275 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-11-28 16:12:13,408 [salt.state       :300 ][INFO    ][3133] File changed:
New file
2018-11-28 16:12:13,408 [salt.state       :1951][INFO    ][3133] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 16:12:13.408741 duration_in_ms=158.016
2018-11-28 16:12:13,411 [salt.state       :1780][INFO    ][3133] Running state [service.systemctl_reload] at time 16:12:13.411079
2018-11-28 16:12:13,411 [salt.state       :1813][INFO    ][3133] Executing state module.wait for [service.systemctl_reload]
2018-11-28 16:12:13,411 [salt.state       :300 ][INFO    ][3133] No changes made for service.systemctl_reload
2018-11-28 16:12:13,411 [salt.state       :1951][INFO    ][3133] Completed state [service.systemctl_reload] at time 16:12:13.411912 duration_in_ms=0.833
2018-11-28 16:12:13,412 [salt.state       :1780][INFO    ][3133] Running state [service.systemctl_reload] at time 16:12:13.412137
2018-11-28 16:12:13,412 [salt.state       :1813][INFO    ][3133] Executing state module.mod_watch for [service.systemctl_reload]
2018-11-28 16:12:13,412 [salt.utils.decorators:613 ][WARNING ][3133] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-28 16:12:13,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-11-28 16:12:13,550 [salt.state       :300 ][INFO    ][3133] {'ret': True}
2018-11-28 16:12:13,551 [salt.state       :1951][INFO    ][3133] Completed state [service.systemctl_reload] at time 16:12:13.551553 duration_in_ms=139.415
2018-11-28 16:12:13,553 [salt.state       :1780][INFO    ][3133] Running state [/etc/shadow] at time 16:12:13.553061
2018-11-28 16:12:13,554 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/shadow]
2018-11-28 16:12:13,555 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,556 [salt.state       :300 ][INFO    ][3133] File /etc/shadow exists with proper permissions. No changes made.
2018-11-28 16:12:13,556 [salt.state       :1951][INFO    ][3133] Completed state [/etc/shadow] at time 16:12:13.556301 duration_in_ms=3.24
2018-11-28 16:12:13,556 [salt.state       :1780][INFO    ][3133] Running state [/etc/gshadow] at time 16:12:13.556586
2018-11-28 16:12:13,556 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/gshadow]
2018-11-28 16:12:13,557 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,559 [salt.state       :300 ][INFO    ][3133] File /etc/gshadow exists with proper permissions. No changes made.
2018-11-28 16:12:13,559 [salt.state       :1951][INFO    ][3133] Completed state [/etc/gshadow] at time 16:12:13.559578 duration_in_ms=2.992
2018-11-28 16:12:13,559 [salt.state       :1780][INFO    ][3133] Running state [/etc/group-] at time 16:12:13.559830
2018-11-28 16:12:13,560 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/group-]
2018-11-28 16:12:13,560 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,561 [salt.state       :300 ][INFO    ][3133] File /etc/group- exists with proper permissions. No changes made.
2018-11-28 16:12:13,561 [salt.state       :1951][INFO    ][3133] Completed state [/etc/group-] at time 16:12:13.561280 duration_in_ms=1.45
2018-11-28 16:12:13,561 [salt.state       :1780][INFO    ][3133] Running state [/etc/shadow-] at time 16:12:13.561811
2018-11-28 16:12:13,562 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/shadow-]
2018-11-28 16:12:13,562 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,563 [salt.state       :300 ][INFO    ][3133] File /etc/shadow- exists with proper permissions. No changes made.
2018-11-28 16:12:13,563 [salt.state       :1951][INFO    ][3133] Completed state [/etc/shadow-] at time 16:12:13.563291 duration_in_ms=1.479
2018-11-28 16:12:13,563 [salt.state       :1780][INFO    ][3133] Running state [/etc/passwd-] at time 16:12:13.563529
2018-11-28 16:12:13,563 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/passwd-]
2018-11-28 16:12:13,564 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,564 [salt.state       :300 ][INFO    ][3133] File /etc/passwd- exists with proper permissions. No changes made.
2018-11-28 16:12:13,564 [salt.state       :1951][INFO    ][3133] Completed state [/etc/passwd-] at time 16:12:13.564947 duration_in_ms=1.418
2018-11-28 16:12:13,565 [salt.state       :1780][INFO    ][3133] Running state [/etc/passwd] at time 16:12:13.565183
2018-11-28 16:12:13,565 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/passwd]
2018-11-28 16:12:13,565 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,566 [salt.state       :300 ][INFO    ][3133] File /etc/passwd exists with proper permissions. No changes made.
2018-11-28 16:12:13,566 [salt.state       :1951][INFO    ][3133] Completed state [/etc/passwd] at time 16:12:13.566663 duration_in_ms=1.48
2018-11-28 16:12:13,566 [salt.state       :1780][INFO    ][3133] Running state [/etc/gshadow-] at time 16:12:13.566899
2018-11-28 16:12:13,567 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/gshadow-]
2018-11-28 16:12:13,567 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,568 [salt.state       :300 ][INFO    ][3133] File /etc/gshadow- exists with proper permissions. No changes made.
2018-11-28 16:12:13,568 [salt.state       :1951][INFO    ][3133] Completed state [/etc/gshadow-] at time 16:12:13.568340 duration_in_ms=1.441
2018-11-28 16:12:13,568 [salt.state       :1780][INFO    ][3133] Running state [/etc/group] at time 16:12:13.568570
2018-11-28 16:12:13,568 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/group]
2018-11-28 16:12:13,569 [salt.loaded.int.states.file:2298][WARNING ][3133] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:12:13,570 [salt.state       :300 ][INFO    ][3133] File /etc/group exists with proper permissions. No changes made.
2018-11-28 16:12:13,570 [salt.state       :1951][INFO    ][3133] Completed state [/etc/group] at time 16:12:13.570876 duration_in_ms=2.306
2018-11-28 16:12:13,571 [salt.state       :1780][INFO    ][3133] Running state [/etc/issue] at time 16:12:13.571139
2018-11-28 16:12:13,571 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/issue]
2018-11-28 16:12:13,574 [salt.state       :300 ][INFO    ][3133] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-11-28 16:12:13,574 [salt.state       :1951][INFO    ][3133] Completed state [/etc/issue] at time 16:12:13.574806 duration_in_ms=3.667
2018-11-28 16:12:13,575 [salt.state       :1780][INFO    ][3133] Running state [/etc/hostname] at time 16:12:13.575058
2018-11-28 16:12:13,575 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/hostname]
2018-11-28 16:12:13,592 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-11-28 16:12:13,606 [salt.state       :300 ][INFO    ][3133] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb03

2018-11-28 16:12:13,606 [salt.state       :1951][INFO    ][3133] Completed state [/etc/hostname] at time 16:12:13.606676 duration_in_ms=31.617
2018-11-28 16:12:13,610 [salt.state       :1780][INFO    ][3133] Running state [hostname mdb03] at time 16:12:13.610361
2018-11-28 16:12:13,610 [salt.state       :1813][INFO    ][3133] Executing state cmd.run for [hostname mdb03]
2018-11-28 16:12:13,611 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'test "$(hostname)" = "mdb03"' in directory '/root'
2018-11-28 16:12:13,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'hostname mdb03' in directory '/root'
2018-11-28 16:12:13,643 [salt.state       :300 ][INFO    ][3133] {'pid': 5379, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-11-28 16:12:13,644 [salt.state       :1951][INFO    ][3133] Completed state [hostname mdb03] at time 16:12:13.644458 duration_in_ms=34.096
2018-11-28 16:12:13,647 [salt.state       :1780][INFO    ][3133] Running state [mdb02] at time 16:12:13.647324
2018-11-28 16:12:13,647 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb02]
2018-11-28 16:12:13,649 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb02'}
2018-11-28 16:12:13,649 [salt.state       :1951][INFO    ][3133] Completed state [mdb02] at time 16:12:13.649326 duration_in_ms=2.001
2018-11-28 16:12:13,649 [salt.state       :1780][INFO    ][3133] Running state [mdb02.mcp-odl-ha.local] at time 16:12:13.649758
2018-11-28 16:12:13,650 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb02.mcp-odl-ha.local]
2018-11-28 16:12:13,651 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb02.mcp-odl-ha.local'}
2018-11-28 16:12:13,651 [salt.state       :1951][INFO    ][3133] Completed state [mdb02.mcp-odl-ha.local] at time 16:12:13.651277 duration_in_ms=1.519
2018-11-28 16:12:13,651 [salt.state       :1780][INFO    ][3133] Running state [mdb03] at time 16:12:13.651666
2018-11-28 16:12:13,651 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb03]
2018-11-28 16:12:13,652 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb03'}
2018-11-28 16:12:13,653 [salt.state       :1951][INFO    ][3133] Completed state [mdb03] at time 16:12:13.653089 duration_in_ms=1.423
2018-11-28 16:12:13,654 [salt.state       :1780][INFO    ][3133] Running state [mdb03.mcp-odl-ha.local] at time 16:12:13.654342
2018-11-28 16:12:13,654 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb03.mcp-odl-ha.local]
2018-11-28 16:12:13,655 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb03.mcp-odl-ha.local'}
2018-11-28 16:12:13,655 [salt.state       :1951][INFO    ][3133] Completed state [mdb03.mcp-odl-ha.local] at time 16:12:13.655784 duration_in_ms=1.442
2018-11-28 16:12:13,656 [salt.state       :1780][INFO    ][3133] Running state [mdb01] at time 16:12:13.656161
2018-11-28 16:12:13,656 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb01]
2018-11-28 16:12:13,658 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb01'}
2018-11-28 16:12:13,658 [salt.state       :1951][INFO    ][3133] Completed state [mdb01] at time 16:12:13.658469 duration_in_ms=2.308
2018-11-28 16:12:13,658 [salt.state       :1780][INFO    ][3133] Running state [mdb01.mcp-odl-ha.local] at time 16:12:13.658852
2018-11-28 16:12:13,659 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb01.mcp-odl-ha.local]
2018-11-28 16:12:13,660 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb01.mcp-odl-ha.local'}
2018-11-28 16:12:13,660 [salt.state       :1951][INFO    ][3133] Completed state [mdb01.mcp-odl-ha.local] at time 16:12:13.660323 duration_in_ms=1.471
2018-11-28 16:12:13,660 [salt.state       :1780][INFO    ][3133] Running state [mdb] at time 16:12:13.660701
2018-11-28 16:12:13,660 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb]
2018-11-28 16:12:13,663 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb'}
2018-11-28 16:12:13,664 [salt.state       :1951][INFO    ][3133] Completed state [mdb] at time 16:12:13.664050 duration_in_ms=3.349
2018-11-28 16:12:13,664 [salt.state       :1780][INFO    ][3133] Running state [mdb.mcp-odl-ha.local] at time 16:12:13.664454
2018-11-28 16:12:13,664 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mdb.mcp-odl-ha.local]
2018-11-28 16:12:13,666 [salt.state       :300 ][INFO    ][3133] {'host': 'mdb.mcp-odl-ha.local'}
2018-11-28 16:12:13,666 [salt.state       :1951][INFO    ][3133] Completed state [mdb.mcp-odl-ha.local] at time 16:12:13.666517 duration_in_ms=2.063
2018-11-28 16:12:13,666 [salt.state       :1780][INFO    ][3133] Running state [cfg01] at time 16:12:13.666900
2018-11-28 16:12:13,667 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cfg01]
2018-11-28 16:12:13,668 [salt.state       :300 ][INFO    ][3133] {'host': 'cfg01'}
2018-11-28 16:12:13,668 [salt.state       :1951][INFO    ][3133] Completed state [cfg01] at time 16:12:13.668315 duration_in_ms=1.416
2018-11-28 16:12:13,668 [salt.state       :1780][INFO    ][3133] Running state [cfg01.mcp-odl-ha.local] at time 16:12:13.668690
2018-11-28 16:12:13,668 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-11-28 16:12:13,670 [salt.state       :300 ][INFO    ][3133] {'host': 'cfg01.mcp-odl-ha.local'}
2018-11-28 16:12:13,670 [salt.state       :1951][INFO    ][3133] Completed state [cfg01.mcp-odl-ha.local] at time 16:12:13.670429 duration_in_ms=1.739
2018-11-28 16:12:13,670 [salt.state       :1780][INFO    ][3133] Running state [prx01] at time 16:12:13.670803
2018-11-28 16:12:13,671 [salt.state       :1813][INFO    ][3133] Executing state host.present for [prx01]
2018-11-28 16:12:13,672 [salt.state       :300 ][INFO    ][3133] {'host': 'prx01'}
2018-11-28 16:12:13,672 [salt.state       :1951][INFO    ][3133] Completed state [prx01] at time 16:12:13.672224 duration_in_ms=1.421
2018-11-28 16:12:13,672 [salt.state       :1780][INFO    ][3133] Running state [prx01.mcp-odl-ha.local] at time 16:12:13.672597
2018-11-28 16:12:13,672 [salt.state       :1813][INFO    ][3133] Executing state host.present for [prx01.mcp-odl-ha.local]
2018-11-28 16:12:13,674 [salt.state       :300 ][INFO    ][3133] {'host': 'prx01.mcp-odl-ha.local'}
2018-11-28 16:12:13,674 [salt.state       :1951][INFO    ][3133] Completed state [prx01.mcp-odl-ha.local] at time 16:12:13.674356 duration_in_ms=1.759
2018-11-28 16:12:13,674 [salt.state       :1780][INFO    ][3133] Running state [kvm01] at time 16:12:13.674732
2018-11-28 16:12:13,675 [salt.state       :1813][INFO    ][3133] Executing state host.present for [kvm01]
2018-11-28 16:12:13,675 [salt.state       :300 ][INFO    ][3133] {'host': 'kvm01'}
2018-11-28 16:12:13,676 [salt.state       :1951][INFO    ][3133] Completed state [kvm01] at time 16:12:13.676189 duration_in_ms=1.457
2018-11-28 16:12:13,676 [salt.state       :1780][INFO    ][3133] Running state [kvm01.mcp-odl-ha.local] at time 16:12:13.676576
2018-11-28 16:12:13,676 [salt.state       :1813][INFO    ][3133] Executing state host.present for [kvm01.mcp-odl-ha.local]
2018-11-28 16:12:13,678 [salt.state       :300 ][INFO    ][3133] {'host': 'kvm01.mcp-odl-ha.local'}
2018-11-28 16:12:13,678 [salt.state       :1951][INFO    ][3133] Completed state [kvm01.mcp-odl-ha.local] at time 16:12:13.678669 duration_in_ms=2.093
2018-11-28 16:12:13,679 [salt.state       :1780][INFO    ][3133] Running state [kvm03] at time 16:12:13.679058
2018-11-28 16:12:13,679 [salt.state       :1813][INFO    ][3133] Executing state host.present for [kvm03]
2018-11-28 16:12:13,680 [salt.state       :300 ][INFO    ][3133] {'host': 'kvm03'}
2018-11-28 16:12:13,680 [salt.state       :1951][INFO    ][3133] Completed state [kvm03] at time 16:12:13.680511 duration_in_ms=1.453
2018-11-28 16:12:13,680 [salt.state       :1780][INFO    ][3133] Running state [kvm03.mcp-odl-ha.local] at time 16:12:13.680890
2018-11-28 16:12:13,681 [salt.state       :1813][INFO    ][3133] Executing state host.present for [kvm03.mcp-odl-ha.local]
2018-11-28 16:12:13,683 [salt.state       :300 ][INFO    ][3133] {'host': 'kvm03.mcp-odl-ha.local'}
2018-11-28 16:12:13,683 [salt.state       :1951][INFO    ][3133] Completed state [kvm03.mcp-odl-ha.local] at time 16:12:13.683256 duration_in_ms=2.366
2018-11-28 16:12:13,683 [salt.state       :1780][INFO    ][3133] Running state [kvm02] at time 16:12:13.683645
2018-11-28 16:12:13,683 [salt.state       :1813][INFO    ][3133] Executing state host.present for [kvm02]
2018-11-28 16:12:13,685 [salt.state       :300 ][INFO    ][3133] {'host': 'kvm02'}
2018-11-28 16:12:13,685 [salt.state       :1951][INFO    ][3133] Completed state [kvm02] at time 16:12:13.685705 duration_in_ms=2.06
2018-11-28 16:12:13,686 [salt.state       :1780][INFO    ][3133] Running state [kvm02.mcp-odl-ha.local] at time 16:12:13.686126
2018-11-28 16:12:13,686 [salt.state       :1813][INFO    ][3133] Executing state host.present for [kvm02.mcp-odl-ha.local]
2018-11-28 16:12:13,687 [salt.state       :300 ][INFO    ][3133] {'host': 'kvm02.mcp-odl-ha.local'}
2018-11-28 16:12:13,687 [salt.state       :1951][INFO    ][3133] Completed state [kvm02.mcp-odl-ha.local] at time 16:12:13.687647 duration_in_ms=1.521
2018-11-28 16:12:13,688 [salt.state       :1780][INFO    ][3133] Running state [dbs] at time 16:12:13.688037
2018-11-28 16:12:13,688 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs]
2018-11-28 16:12:13,691 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs'}
2018-11-28 16:12:13,691 [salt.state       :1951][INFO    ][3133] Completed state [dbs] at time 16:12:13.691513 duration_in_ms=3.476
2018-11-28 16:12:13,691 [salt.state       :1780][INFO    ][3133] Running state [dbs.mcp-odl-ha.local] at time 16:12:13.691908
2018-11-28 16:12:13,692 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs.mcp-odl-ha.local]
2018-11-28 16:12:13,693 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs.mcp-odl-ha.local'}
2018-11-28 16:12:13,694 [salt.state       :1951][INFO    ][3133] Completed state [dbs.mcp-odl-ha.local] at time 16:12:13.694571 duration_in_ms=2.663
2018-11-28 16:12:13,695 [salt.state       :1780][INFO    ][3133] Running state [prx] at time 16:12:13.694971
2018-11-28 16:12:13,695 [salt.state       :1813][INFO    ][3133] Executing state host.present for [prx]
2018-11-28 16:12:13,696 [salt.state       :300 ][INFO    ][3133] {'host': 'prx'}
2018-11-28 16:12:13,696 [salt.state       :1951][INFO    ][3133] Completed state [prx] at time 16:12:13.696549 duration_in_ms=1.578
2018-11-28 16:12:13,696 [salt.state       :1780][INFO    ][3133] Running state [prx.mcp-odl-ha.local] at time 16:12:13.696945
2018-11-28 16:12:13,697 [salt.state       :1813][INFO    ][3133] Executing state host.present for [prx.mcp-odl-ha.local]
2018-11-28 16:12:13,699 [salt.state       :300 ][INFO    ][3133] {'host': 'prx.mcp-odl-ha.local'}
2018-11-28 16:12:13,699 [salt.state       :1951][INFO    ][3133] Completed state [prx.mcp-odl-ha.local] at time 16:12:13.699664 duration_in_ms=2.718
2018-11-28 16:12:13,700 [salt.state       :1780][INFO    ][3133] Running state [prx02] at time 16:12:13.700080
2018-11-28 16:12:13,700 [salt.state       :1813][INFO    ][3133] Executing state host.present for [prx02]
2018-11-28 16:12:13,703 [salt.state       :300 ][INFO    ][3133] {'host': 'prx02'}
2018-11-28 16:12:13,703 [salt.state       :1951][INFO    ][3133] Completed state [prx02] at time 16:12:13.703859 duration_in_ms=3.779
2018-11-28 16:12:13,704 [salt.state       :1780][INFO    ][3133] Running state [prx02.mcp-odl-ha.local] at time 16:12:13.704255
2018-11-28 16:12:13,704 [salt.state       :1813][INFO    ][3133] Executing state host.present for [prx02.mcp-odl-ha.local]
2018-11-28 16:12:13,705 [salt.state       :300 ][INFO    ][3133] {'host': 'prx02.mcp-odl-ha.local'}
2018-11-28 16:12:13,706 [salt.state       :1951][INFO    ][3133] Completed state [prx02.mcp-odl-ha.local] at time 16:12:13.706147 duration_in_ms=1.891
2018-11-28 16:12:13,706 [salt.state       :1780][INFO    ][3133] Running state [msg02] at time 16:12:13.706559
2018-11-28 16:12:13,706 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg02]
2018-11-28 16:12:13,707 [salt.state       :300 ][INFO    ][3133] {'host': 'msg02'}
2018-11-28 16:12:13,708 [salt.state       :1951][INFO    ][3133] Completed state [msg02] at time 16:12:13.708111 duration_in_ms=1.552
2018-11-28 16:12:13,708 [salt.state       :1780][INFO    ][3133] Running state [msg02.mcp-odl-ha.local] at time 16:12:13.708515
2018-11-28 16:12:13,708 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg02.mcp-odl-ha.local]
2018-11-28 16:12:13,710 [salt.state       :300 ][INFO    ][3133] {'host': 'msg02.mcp-odl-ha.local'}
2018-11-28 16:12:13,710 [salt.state       :1951][INFO    ][3133] Completed state [msg02.mcp-odl-ha.local] at time 16:12:13.710675 duration_in_ms=2.16
2018-11-28 16:12:13,711 [salt.state       :1780][INFO    ][3133] Running state [msg03] at time 16:12:13.711076
2018-11-28 16:12:13,711 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg03]
2018-11-28 16:12:13,712 [salt.state       :300 ][INFO    ][3133] {'host': 'msg03'}
2018-11-28 16:12:13,712 [salt.state       :1951][INFO    ][3133] Completed state [msg03] at time 16:12:13.712637 duration_in_ms=1.561
2018-11-28 16:12:13,713 [salt.state       :1780][INFO    ][3133] Running state [msg03.mcp-odl-ha.local] at time 16:12:13.713048
2018-11-28 16:12:13,713 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg03.mcp-odl-ha.local]
2018-11-28 16:12:13,715 [salt.state       :300 ][INFO    ][3133] {'host': 'msg03.mcp-odl-ha.local'}
2018-11-28 16:12:13,716 [salt.state       :1951][INFO    ][3133] Completed state [msg03.mcp-odl-ha.local] at time 16:12:13.716059 duration_in_ms=3.011
2018-11-28 16:12:13,716 [salt.state       :1780][INFO    ][3133] Running state [msg01] at time 16:12:13.716477
2018-11-28 16:12:13,716 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg01]
2018-11-28 16:12:13,717 [salt.state       :300 ][INFO    ][3133] {'host': 'msg01'}
2018-11-28 16:12:13,718 [salt.state       :1951][INFO    ][3133] Completed state [msg01] at time 16:12:13.718110 duration_in_ms=1.603
2018-11-28 16:12:13,718 [salt.state       :1780][INFO    ][3133] Running state [msg01.mcp-odl-ha.local] at time 16:12:13.718536
2018-11-28 16:12:13,718 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg01.mcp-odl-ha.local]
2018-11-28 16:12:13,719 [salt.state       :300 ][INFO    ][3133] {'host': 'msg01.mcp-odl-ha.local'}
2018-11-28 16:12:13,720 [salt.state       :1951][INFO    ][3133] Completed state [msg01.mcp-odl-ha.local] at time 16:12:13.720124 duration_in_ms=1.588
2018-11-28 16:12:13,720 [salt.state       :1780][INFO    ][3133] Running state [msg] at time 16:12:13.720527
2018-11-28 16:12:13,720 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg]
2018-11-28 16:12:13,721 [salt.state       :300 ][INFO    ][3133] {'host': 'msg'}
2018-11-28 16:12:13,722 [salt.state       :1951][INFO    ][3133] Completed state [msg] at time 16:12:13.722185 duration_in_ms=1.658
2018-11-28 16:12:13,722 [salt.state       :1780][INFO    ][3133] Running state [msg.mcp-odl-ha.local] at time 16:12:13.722609
2018-11-28 16:12:13,722 [salt.state       :1813][INFO    ][3133] Executing state host.present for [msg.mcp-odl-ha.local]
2018-11-28 16:12:13,724 [salt.state       :300 ][INFO    ][3133] {'host': 'msg.mcp-odl-ha.local'}
2018-11-28 16:12:13,724 [salt.state       :1951][INFO    ][3133] Completed state [msg.mcp-odl-ha.local] at time 16:12:13.724294 duration_in_ms=1.685
2018-11-28 16:12:13,724 [salt.state       :1780][INFO    ][3133] Running state [cfg01] at time 16:12:13.724710
2018-11-28 16:12:13,724 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cfg01]
2018-11-28 16:12:13,726 [salt.state       :300 ][INFO    ][3133] Host cfg01 (192.168.10.11) already present
2018-11-28 16:12:13,726 [salt.state       :1951][INFO    ][3133] Completed state [cfg01] at time 16:12:13.726752 duration_in_ms=2.042
2018-11-28 16:12:13,727 [salt.state       :1780][INFO    ][3133] Running state [cfg01.mcp-odl-ha.local] at time 16:12:13.727157
2018-11-28 16:12:13,727 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-11-28 16:12:13,727 [salt.state       :300 ][INFO    ][3133] Host cfg01.mcp-odl-ha.local (192.168.10.11) already present
2018-11-28 16:12:13,728 [salt.state       :1951][INFO    ][3133] Completed state [cfg01.mcp-odl-ha.local] at time 16:12:13.728103 duration_in_ms=0.946
2018-11-28 16:12:13,728 [salt.state       :1780][INFO    ][3133] Running state [cmp002] at time 16:12:13.728496
2018-11-28 16:12:13,728 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cmp002]
2018-11-28 16:12:13,730 [salt.state       :300 ][INFO    ][3133] {'host': 'cmp002'}
2018-11-28 16:12:13,730 [salt.state       :1951][INFO    ][3133] Completed state [cmp002] at time 16:12:13.730725 duration_in_ms=2.229
2018-11-28 16:12:13,731 [salt.state       :1780][INFO    ][3133] Running state [cmp002.mcp-odl-ha.local] at time 16:12:13.731129
2018-11-28 16:12:13,731 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cmp002.mcp-odl-ha.local]
2018-11-28 16:12:13,732 [salt.state       :300 ][INFO    ][3133] {'host': 'cmp002.mcp-odl-ha.local'}
2018-11-28 16:12:13,732 [salt.state       :1951][INFO    ][3133] Completed state [cmp002.mcp-odl-ha.local] at time 16:12:13.732740 duration_in_ms=1.611
2018-11-28 16:12:13,733 [salt.state       :1780][INFO    ][3133] Running state [cmp001] at time 16:12:13.733171
2018-11-28 16:12:13,734 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cmp001]
2018-11-28 16:12:13,735 [salt.state       :300 ][INFO    ][3133] {'host': 'cmp001'}
2018-11-28 16:12:13,735 [salt.state       :1951][INFO    ][3133] Completed state [cmp001] at time 16:12:13.735386 duration_in_ms=2.215
2018-11-28 16:12:13,735 [salt.state       :1780][INFO    ][3133] Running state [cmp001.mcp-odl-ha.local] at time 16:12:13.735788
2018-11-28 16:12:13,736 [salt.state       :1813][INFO    ][3133] Executing state host.present for [cmp001.mcp-odl-ha.local]
2018-11-28 16:12:13,737 [salt.state       :300 ][INFO    ][3133] {'host': 'cmp001.mcp-odl-ha.local'}
2018-11-28 16:12:13,738 [salt.state       :1951][INFO    ][3133] Completed state [cmp001.mcp-odl-ha.local] at time 16:12:13.738555 duration_in_ms=2.767
2018-11-28 16:12:13,739 [salt.state       :1780][INFO    ][3133] Running state [dbs01] at time 16:12:13.738960
2018-11-28 16:12:13,739 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs01]
2018-11-28 16:12:13,740 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs01'}
2018-11-28 16:12:13,740 [salt.state       :1951][INFO    ][3133] Completed state [dbs01] at time 16:12:13.740620 duration_in_ms=1.66
2018-11-28 16:12:13,741 [salt.state       :1780][INFO    ][3133] Running state [dbs01.mcp-odl-ha.local] at time 16:12:13.741032
2018-11-28 16:12:13,741 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs01.mcp-odl-ha.local]
2018-11-28 16:12:13,743 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs01.mcp-odl-ha.local'}
2018-11-28 16:12:13,743 [salt.state       :1951][INFO    ][3133] Completed state [dbs01.mcp-odl-ha.local] at time 16:12:13.743279 duration_in_ms=2.246
2018-11-28 16:12:13,743 [salt.state       :1780][INFO    ][3133] Running state [dbs02] at time 16:12:13.743696
2018-11-28 16:12:13,743 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs02]
2018-11-28 16:12:13,745 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs02'}
2018-11-28 16:12:13,745 [salt.state       :1951][INFO    ][3133] Completed state [dbs02] at time 16:12:13.745384 duration_in_ms=1.688
2018-11-28 16:12:13,745 [salt.state       :1780][INFO    ][3133] Running state [dbs02.mcp-odl-ha.local] at time 16:12:13.745811
2018-11-28 16:12:13,746 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs02.mcp-odl-ha.local]
2018-11-28 16:12:13,747 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs02.mcp-odl-ha.local'}
2018-11-28 16:12:13,747 [salt.state       :1951][INFO    ][3133] Completed state [dbs02.mcp-odl-ha.local] at time 16:12:13.747522 duration_in_ms=1.711
2018-11-28 16:12:13,747 [salt.state       :1780][INFO    ][3133] Running state [dbs03] at time 16:12:13.747936
2018-11-28 16:12:13,748 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs03]
2018-11-28 16:12:13,750 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs03'}
2018-11-28 16:12:13,751 [salt.state       :1951][INFO    ][3133] Completed state [dbs03] at time 16:12:13.751020 duration_in_ms=3.085
2018-11-28 16:12:13,751 [salt.state       :1780][INFO    ][3133] Running state [dbs03.mcp-odl-ha.local] at time 16:12:13.751438
2018-11-28 16:12:13,751 [salt.state       :1813][INFO    ][3133] Executing state host.present for [dbs03.mcp-odl-ha.local]
2018-11-28 16:12:13,752 [salt.state       :300 ][INFO    ][3133] {'host': 'dbs03.mcp-odl-ha.local'}
2018-11-28 16:12:13,753 [salt.state       :1951][INFO    ][3133] Completed state [dbs03.mcp-odl-ha.local] at time 16:12:13.753084 duration_in_ms=1.646
2018-11-28 16:12:13,754 [salt.state       :1780][INFO    ][3133] Running state [odl02] at time 16:12:13.754053
2018-11-28 16:12:13,754 [salt.state       :1813][INFO    ][3133] Executing state host.present for [odl02]
2018-11-28 16:12:13,755 [salt.state       :300 ][INFO    ][3133] {'host': 'odl02'}
2018-11-28 16:12:13,755 [salt.state       :1951][INFO    ][3133] Completed state [odl02] at time 16:12:13.755744 duration_in_ms=1.69
2018-11-28 16:12:13,756 [salt.state       :1780][INFO    ][3133] Running state [odl02.mcp-odl-ha.local] at time 16:12:13.756169
2018-11-28 16:12:13,756 [salt.state       :1813][INFO    ][3133] Executing state host.present for [odl02.mcp-odl-ha.local]
2018-11-28 16:12:13,758 [salt.state       :300 ][INFO    ][3133] {'host': 'odl02.mcp-odl-ha.local'}
2018-11-28 16:12:13,758 [salt.state       :1951][INFO    ][3133] Completed state [odl02.mcp-odl-ha.local] at time 16:12:13.758727 duration_in_ms=2.558
2018-11-28 16:12:13,759 [salt.state       :1780][INFO    ][3133] Running state [odl03] at time 16:12:13.759151
2018-11-28 16:12:13,759 [salt.state       :1813][INFO    ][3133] Executing state host.present for [odl03]
2018-11-28 16:12:13,760 [salt.state       :300 ][INFO    ][3133] {'host': 'odl03'}
2018-11-28 16:12:13,760 [salt.state       :1951][INFO    ][3133] Completed state [odl03] at time 16:12:13.760818 duration_in_ms=1.667
2018-11-28 16:12:13,761 [salt.state       :1780][INFO    ][3133] Running state [odl03.mcp-odl-ha.local] at time 16:12:13.761230
2018-11-28 16:12:13,763 [salt.state       :1813][INFO    ][3133] Executing state host.present for [odl03.mcp-odl-ha.local]
2018-11-28 16:12:13,764 [salt.state       :300 ][INFO    ][3133] {'host': 'odl03.mcp-odl-ha.local'}
2018-11-28 16:12:13,764 [salt.state       :1951][INFO    ][3133] Completed state [odl03.mcp-odl-ha.local] at time 16:12:13.764568 duration_in_ms=3.338
2018-11-28 16:12:13,765 [salt.state       :1780][INFO    ][3133] Running state [odl01] at time 16:12:13.764981
2018-11-28 16:12:13,765 [salt.state       :1813][INFO    ][3133] Executing state host.present for [odl01]
2018-11-28 16:12:13,766 [salt.state       :300 ][INFO    ][3133] {'host': 'odl01'}
2018-11-28 16:12:13,767 [salt.state       :1951][INFO    ][3133] Completed state [odl01] at time 16:12:13.767014 duration_in_ms=2.033
2018-11-28 16:12:13,767 [salt.state       :1780][INFO    ][3133] Running state [odl01.mcp-odl-ha.local] at time 16:12:13.767431
2018-11-28 16:12:13,767 [salt.state       :1813][INFO    ][3133] Executing state host.present for [odl01.mcp-odl-ha.local]
2018-11-28 16:12:13,768 [salt.state       :300 ][INFO    ][3133] {'host': 'odl01.mcp-odl-ha.local'}
2018-11-28 16:12:13,769 [salt.state       :1951][INFO    ][3133] Completed state [odl01.mcp-odl-ha.local] at time 16:12:13.769117 duration_in_ms=1.686
2018-11-28 16:12:13,769 [salt.state       :1780][INFO    ][3133] Running state [mas01] at time 16:12:13.769838
2018-11-28 16:12:13,770 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mas01]
2018-11-28 16:12:13,771 [salt.state       :300 ][INFO    ][3133] {'host': 'mas01'}
2018-11-28 16:12:13,771 [salt.state       :1951][INFO    ][3133] Completed state [mas01] at time 16:12:13.771732 duration_in_ms=1.894
2018-11-28 16:12:13,772 [salt.state       :1780][INFO    ][3133] Running state [mas01.mcp-odl-ha.local] at time 16:12:13.772154
2018-11-28 16:12:13,772 [salt.state       :1813][INFO    ][3133] Executing state host.present for [mas01.mcp-odl-ha.local]
2018-11-28 16:12:13,775 [salt.state       :300 ][INFO    ][3133] {'host': 'mas01.mcp-odl-ha.local'}
2018-11-28 16:12:13,775 [salt.state       :1951][INFO    ][3133] Completed state [mas01.mcp-odl-ha.local] at time 16:12:13.775283 duration_in_ms=3.129
2018-11-28 16:12:13,775 [salt.state       :1780][INFO    ][3133] Running state [ctl02] at time 16:12:13.775704
2018-11-28 16:12:13,775 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl02]
2018-11-28 16:12:13,777 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl02'}
2018-11-28 16:12:13,777 [salt.state       :1951][INFO    ][3133] Completed state [ctl02] at time 16:12:13.777716 duration_in_ms=2.011
2018-11-28 16:12:13,778 [salt.state       :1780][INFO    ][3133] Running state [ctl02.mcp-odl-ha.local] at time 16:12:13.778176
2018-11-28 16:12:13,778 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl02.mcp-odl-ha.local]
2018-11-28 16:12:13,779 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl02.mcp-odl-ha.local'}
2018-11-28 16:12:13,779 [salt.state       :1951][INFO    ][3133] Completed state [ctl02.mcp-odl-ha.local] at time 16:12:13.779889 duration_in_ms=1.713
2018-11-28 16:12:13,780 [salt.state       :1780][INFO    ][3133] Running state [ctl03] at time 16:12:13.780311
2018-11-28 16:12:13,780 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl03]
2018-11-28 16:12:13,781 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl03'}
2018-11-28 16:12:13,782 [salt.state       :1951][INFO    ][3133] Completed state [ctl03] at time 16:12:13.782043 duration_in_ms=1.732
2018-11-28 16:12:13,782 [salt.state       :1780][INFO    ][3133] Running state [ctl03.mcp-odl-ha.local] at time 16:12:13.782490
2018-11-28 16:12:13,782 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl03.mcp-odl-ha.local]
2018-11-28 16:12:13,783 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl03.mcp-odl-ha.local'}
2018-11-28 16:12:13,784 [salt.state       :1951][INFO    ][3133] Completed state [ctl03.mcp-odl-ha.local] at time 16:12:13.784200 duration_in_ms=1.71
2018-11-28 16:12:13,784 [salt.state       :1780][INFO    ][3133] Running state [ctl01] at time 16:12:13.784635
2018-11-28 16:12:13,784 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl01]
2018-11-28 16:12:13,786 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl01'}
2018-11-28 16:12:13,787 [salt.state       :1951][INFO    ][3133] Completed state [ctl01] at time 16:12:13.787028 duration_in_ms=2.393
2018-11-28 16:12:13,787 [salt.state       :1780][INFO    ][3133] Running state [ctl01.mcp-odl-ha.local] at time 16:12:13.787458
2018-11-28 16:12:13,787 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl01.mcp-odl-ha.local]
2018-11-28 16:12:13,789 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl01.mcp-odl-ha.local'}
2018-11-28 16:12:13,789 [salt.state       :1951][INFO    ][3133] Completed state [ctl01.mcp-odl-ha.local] at time 16:12:13.789669 duration_in_ms=2.211
2018-11-28 16:12:13,790 [salt.state       :1780][INFO    ][3133] Running state [ctl] at time 16:12:13.790122
2018-11-28 16:12:13,790 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl]
2018-11-28 16:12:13,791 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl'}
2018-11-28 16:12:13,791 [salt.state       :1951][INFO    ][3133] Completed state [ctl] at time 16:12:13.791865 duration_in_ms=1.743
2018-11-28 16:12:13,792 [salt.state       :1780][INFO    ][3133] Running state [ctl.mcp-odl-ha.local] at time 16:12:13.792291
2018-11-28 16:12:13,792 [salt.state       :1813][INFO    ][3133] Executing state host.present for [ctl.mcp-odl-ha.local]
2018-11-28 16:12:13,793 [salt.state       :300 ][INFO    ][3133] {'host': 'ctl.mcp-odl-ha.local'}
2018-11-28 16:12:13,794 [salt.state       :1951][INFO    ][3133] Completed state [ctl.mcp-odl-ha.local] at time 16:12:13.794054 duration_in_ms=1.762
2018-11-28 16:12:13,794 [salt.state       :1780][INFO    ][3133] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 16:12:13.794360
2018-11-28 16:12:13,794 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-11-28 16:12:13,795 [salt.state       :300 ][INFO    ][3133] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-11-28 16:12:13,795 [salt.state       :1951][INFO    ][3133] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 16:12:13.795282 duration_in_ms=0.922
2018-11-28 16:12:13,796 [salt.state       :1780][INFO    ][3133] Running state [ens3] at time 16:12:13.796154
2018-11-28 16:12:13,796 [salt.state       :1813][INFO    ][3133] Executing state network.managed for [ens3]
2018-11-28 16:12:13,974 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['ifup', 'ens3'] in directory '/root'
2018-11-28 16:12:14,871 [salt.state       :300 ][INFO    ][3133] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-11-28 16:12:14,871 [salt.state       :1951][INFO    ][3133] Completed state [ens3] at time 16:12:14.871794 duration_in_ms=1075.638
2018-11-28 16:12:14,872 [salt.state       :1780][INFO    ][3133] Running state [ens2] at time 16:12:14.872378
2018-11-28 16:12:14,872 [salt.state       :1813][INFO    ][3133] Executing state network.managed for [ens2]
2018-11-28 16:12:14,908 [salt.state       :300 ][INFO    ][3133] {'interface': 'Added network interface.'}
2018-11-28 16:12:14,909 [salt.state       :1951][INFO    ][3133] Completed state [ens2] at time 16:12:14.909121 duration_in_ms=36.742
2018-11-28 16:12:14,911 [salt.state       :1780][INFO    ][3133] Running state [linux_system_network] at time 16:12:14.911163
2018-11-28 16:12:14,911 [salt.state       :1813][INFO    ][3133] Executing state network.system for [linux_system_network]
2018-11-28 16:12:14,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-11-28 16:12:14,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-11-28 16:12:14,965 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-11-28 16:12:14,992 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-11-28 16:12:15,514 [salt.loaded.int.module.debian_ip:1964][WARNING ][3133] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-11-28 16:12:15,516 [salt.state       :300 ][INFO    ][3133] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb03\n\n+DOMAIN=mcp-odl-ha.local\n\n+SEARCH=maas\n'}
2018-11-28 16:12:15,520 [salt.state       :1951][INFO    ][3133] Completed state [linux_system_network] at time 16:12:15.520577 duration_in_ms=609.414
2018-11-28 16:12:15,521 [salt.state       :1780][INFO    ][3133] Running state [/etc/profile.d/proxy.sh] at time 16:12:15.521277
2018-11-28 16:12:15,522 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-11-28 16:12:15,523 [salt.state       :300 ][INFO    ][3133] File /etc/profile.d/proxy.sh is not present
2018-11-28 16:12:15,524 [salt.state       :1951][INFO    ][3133] Completed state [/etc/profile.d/proxy.sh] at time 16:12:15.524275 duration_in_ms=2.998
2018-11-28 16:12:15,524 [salt.state       :1780][INFO    ][3133] Running state [/etc/apt/apt.conf.d/95proxies] at time 16:12:15.524798
2018-11-28 16:12:15,527 [salt.state       :1813][INFO    ][3133] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-11-28 16:12:15,527 [salt.state       :300 ][INFO    ][3133] File /etc/apt/apt.conf.d/95proxies is not present
2018-11-28 16:12:15,528 [salt.state       :1951][INFO    ][3133] Completed state [/etc/apt/apt.conf.d/95proxies] at time 16:12:15.528050 duration_in_ms=3.252
2018-11-28 16:12:15,530 [salt.state       :1780][INFO    ][3133] Running state [/dev/shm] at time 16:12:15.530021
2018-11-28 16:12:15,530 [salt.state       :1813][INFO    ][3133] Executing state mount.mounted for [/dev/shm]
2018-11-28 16:12:15,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'mount -l' in directory '/root'
2018-11-28 16:12:15,554 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'blkid' in directory '/root'
2018-11-28 16:12:15,576 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'mount -l' in directory '/root'
2018-11-28 16:12:15,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-11-28 16:12:15,618 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'mount -l' in directory '/root'
2018-11-28 16:12:15,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-11-28 16:12:15,659 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'mount -l' in directory '/root'
2018-11-28 16:12:15,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'umount /dev/shm' in directory '/root'
2018-11-28 16:12:15,698 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3133] Command '['umount', '/dev/shm']' failed with return code: 32
2018-11-28 16:12:15,699 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3133] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2018-11-28 16:12:15,699 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3133] retcode: 32
2018-11-28 16:12:15,701 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'mount -l' in directory '/root'
2018-11-28 16:12:15,721 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command 'blkid' in directory '/root'
2018-11-28 16:12:15,738 [salt.state       :300 ][INFO    ][3133] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2018-11-28 16:12:15,739 [salt.state       :1951][INFO    ][3133] Completed state [/dev/shm] at time 16:12:15.739387 duration_in_ms=209.365
2018-11-28 16:12:15,742 [salt.state       :1780][INFO    ][3133] Running state [ntp] at time 16:12:15.742914
2018-11-28 16:12:15,743 [salt.state       :1813][INFO    ][3133] Executing state pkg.installed for [ntp]
2018-11-28 16:12:16,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:12:16,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-11-28 16:12:17,610 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161217589712
2018-11-28 16:12:17,653 [salt.minion      :1432][INFO    ][6218] Starting a new job with PID 6218
2018-11-28 16:12:17,687 [salt.minion      :1711][INFO    ][6218] Returning information for job: 20181128161217589712
2018-11-28 16:12:20,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:12:20,468 [salt.state       :300 ][INFO    ][3133] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-11-28 16:12:20,495 [salt.state       :915 ][INFO    ][3133] Loading fresh modules for state activity
2018-11-28 16:12:20,546 [salt.state       :1951][INFO    ][3133] Completed state [ntp] at time 16:12:20.546569 duration_in_ms=4803.653
2018-11-28 16:12:20,555 [salt.state       :1780][INFO    ][3133] Running state [/etc/ntp.conf] at time 16:12:20.555274
2018-11-28 16:12:20,556 [salt.state       :1813][INFO    ][3133] Executing state file.managed for [/etc/ntp.conf]
2018-11-28 16:12:20,581 [salt.fileclient  :1219][INFO    ][3133] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-11-28 16:12:20,666 [salt.state       :300 ][INFO    ][3133] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-11-28 16:12:20,676 [salt.state       :1951][INFO    ][3133] Completed state [/etc/ntp.conf] at time 16:12:20.676123 duration_in_ms=120.849
2018-11-28 16:12:21,278 [salt.state       :1780][INFO    ][3133] Running state [ntp] at time 16:12:21.278221
2018-11-28 16:12:21,279 [salt.state       :1813][INFO    ][3133] Executing state service.running for [ntp]
2018-11-28 16:12:21,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-11-28 16:12:21,308 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-28 16:12:21,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-11-28 16:12:21,356 [salt.state       :300 ][INFO    ][3133] The service ntp is already running
2018-11-28 16:12:21,358 [salt.state       :1951][INFO    ][3133] Completed state [ntp] at time 16:12:21.358457 duration_in_ms=80.237
2018-11-28 16:12:21,359 [salt.state       :1780][INFO    ][3133] Running state [ntp] at time 16:12:21.359074
2018-11-28 16:12:21,359 [salt.state       :1813][INFO    ][3133] Executing state service.mod_watch for [ntp]
2018-11-28 16:12:21,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-28 16:12:21,381 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3133] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-11-28 16:12:21,469 [salt.state       :300 ][INFO    ][3133] {'ntp': True}
2018-11-28 16:12:21,473 [salt.state       :1951][INFO    ][3133] Completed state [ntp] at time 16:12:21.473887 duration_in_ms=114.812
2018-11-28 16:12:21,485 [salt.minion      :1711][INFO    ][3133] Returning information for job: 20181128161120791910
2018-11-28 16:12:48,482 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.apply with jid 20181128161248460861
2018-11-28 16:12:48,508 [salt.minion      :1432][INFO    ][6556] Starting a new job with PID 6556
2018-11-28 16:12:53,754 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161253738319
2018-11-28 16:12:53,785 [salt.minion      :1432][INFO    ][6667] Starting a new job with PID 6667
2018-11-28 16:12:53,802 [salt.minion      :1711][INFO    ][6667] Returning information for job: 20181128161253738319
2018-11-28 16:12:57,166 [salt.state       :915 ][INFO    ][6556] Loading fresh modules for state activity
2018-11-28 16:13:03,918 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161303889673
2018-11-28 16:13:03,944 [salt.minion      :1432][INFO    ][6738] Starting a new job with PID 6738
2018-11-28 16:13:03,967 [salt.minion      :1711][INFO    ][6738] Returning information for job: 20181128161303889673
2018-11-28 16:13:04,062 [salt.state       :1780][INFO    ][6556] Running state [/etc/environment] at time 16:13:04.062179
2018-11-28 16:13:04,062 [salt.state       :1813][INFO    ][6556] Executing state file.blockreplace for [/etc/environment]
2018-11-28 16:13:04,069 [salt.state       :300 ][INFO    ][6556] No changes needed to be made
2018-11-28 16:13:04,069 [salt.state       :1951][INFO    ][6556] Completed state [/etc/environment] at time 16:13:04.069748 duration_in_ms=7.57
2018-11-28 16:13:04,070 [salt.state       :1780][INFO    ][6556] Running state [/etc/profile.d] at time 16:13:04.070009
2018-11-28 16:13:04,070 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/profile.d]
2018-11-28 16:13:04,072 [salt.state       :300 ][INFO    ][6556] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-11-28 16:13:04,072 [salt.state       :1951][INFO    ][6556] Completed state [/etc/profile.d] at time 16:13:04.072204 duration_in_ms=2.194
2018-11-28 16:13:04,072 [salt.state       :1780][INFO    ][6556] Running state [/etc/bash.bashrc] at time 16:13:04.072441
2018-11-28 16:13:04,072 [salt.state       :1813][INFO    ][6556] Executing state file.blockreplace for [/etc/bash.bashrc]
2018-11-28 16:13:04,928 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['git', '--version'] in directory '/root'
2018-11-28 16:13:05,162 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2018-11-28 16:13:05,179 [salt.state       :300 ][INFO    ][6556] No changes needed to be made
2018-11-28 16:13:05,179 [salt.state       :1951][INFO    ][6556] Completed state [/etc/bash.bashrc] at time 16:13:05.179627 duration_in_ms=1107.185
2018-11-28 16:13:05,180 [salt.state       :1780][INFO    ][6556] Running state [/etc/profile] at time 16:13:05.180025
2018-11-28 16:13:05,180 [salt.state       :1813][INFO    ][6556] Executing state file.blockreplace for [/etc/profile]
2018-11-28 16:13:05,188 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'test -f /etc/profile' in directory '/root'
2018-11-28 16:13:05,203 [salt.state       :300 ][INFO    ][6556] No changes needed to be made
2018-11-28 16:13:05,204 [salt.state       :1951][INFO    ][6556] Completed state [/etc/profile] at time 16:13:05.204230 duration_in_ms=24.205
2018-11-28 16:13:05,204 [salt.state       :1780][INFO    ][6556] Running state [/etc/login.defs] at time 16:13:05.204635
2018-11-28 16:13:05,205 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/login.defs]
2018-11-28 16:13:05,360 [salt.state       :300 ][INFO    ][6556] File /etc/login.defs is in the correct state
2018-11-28 16:13:05,361 [salt.state       :1951][INFO    ][6556] Completed state [/etc/login.defs] at time 16:13:05.361083 duration_in_ms=156.448
2018-11-28 16:13:05,370 [salt.state       :1780][INFO    ][6556] Running state [at] at time 16:13:05.370703
2018-11-28 16:13:05,371 [salt.state       :1813][INFO    ][6556] Executing state pkg.installed for [at]
2018-11-28 16:13:05,371 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:13:05,897 [salt.state       :300 ][INFO    ][6556] All specified packages are already installed
2018-11-28 16:13:05,898 [salt.state       :1951][INFO    ][6556] Completed state [at] at time 16:13:05.898299 duration_in_ms=527.595
2018-11-28 16:13:05,900 [salt.state       :1780][INFO    ][6556] Running state [atd] at time 16:13:05.900827
2018-11-28 16:13:05,901 [salt.state       :1813][INFO    ][6556] Executing state service.running for [atd]
2018-11-28 16:13:05,902 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2018-11-28 16:13:05,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2018-11-28 16:13:05,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2018-11-28 16:13:05,980 [salt.state       :300 ][INFO    ][6556] The service atd is already running
2018-11-28 16:13:05,980 [salt.state       :1951][INFO    ][6556] Completed state [atd] at time 16:13:05.980659 duration_in_ms=79.832
2018-11-28 16:13:05,983 [salt.state       :1780][INFO    ][6556] Running state [cron] at time 16:13:05.983872
2018-11-28 16:13:05,984 [salt.state       :1813][INFO    ][6556] Executing state pkg.installed for [cron]
2018-11-28 16:13:05,995 [salt.state       :300 ][INFO    ][6556] All specified packages are already installed
2018-11-28 16:13:05,996 [salt.state       :1951][INFO    ][6556] Completed state [cron] at time 16:13:05.996031 duration_in_ms=12.159
2018-11-28 16:13:05,997 [salt.state       :1780][INFO    ][6556] Running state [/etc/at.allow] at time 16:13:05.997075
2018-11-28 16:13:05,997 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/at.allow]
2018-11-28 16:13:06,020 [salt.state       :300 ][INFO    ][6556] File /etc/at.allow is in the correct state
2018-11-28 16:13:06,020 [salt.state       :1951][INFO    ][6556] Completed state [/etc/at.allow] at time 16:13:06.020726 duration_in_ms=23.651
2018-11-28 16:13:06,021 [salt.state       :1780][INFO    ][6556] Running state [/etc/at.deny] at time 16:13:06.020988
2018-11-28 16:13:06,021 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/at.deny]
2018-11-28 16:13:06,021 [salt.state       :300 ][INFO    ][6556] File /etc/at.deny is not present
2018-11-28 16:13:06,021 [salt.state       :1951][INFO    ][6556] Completed state [/etc/at.deny] at time 16:13:06.021824 duration_in_ms=0.836
2018-11-28 16:13:06,023 [salt.state       :1780][INFO    ][6556] Running state [cron] at time 16:13:06.023549
2018-11-28 16:13:06,023 [salt.state       :1813][INFO    ][6556] Executing state service.running for [cron]
2018-11-28 16:13:06,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2018-11-28 16:13:06,043 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2018-11-28 16:13:06,059 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2018-11-28 16:13:06,080 [salt.state       :300 ][INFO    ][6556] The service cron is already running
2018-11-28 16:13:06,081 [salt.state       :1951][INFO    ][6556] Completed state [cron] at time 16:13:06.081005 duration_in_ms=57.455
2018-11-28 16:13:06,084 [salt.state       :1780][INFO    ][6556] Running state [/etc/cron.allow] at time 16:13:06.083997
2018-11-28 16:13:06,084 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/cron.allow]
2018-11-28 16:13:06,110 [salt.state       :300 ][INFO    ][6556] File /etc/cron.allow is in the correct state
2018-11-28 16:13:06,111 [salt.state       :1951][INFO    ][6556] Completed state [/etc/cron.allow] at time 16:13:06.111125 duration_in_ms=27.128
2018-11-28 16:13:06,111 [salt.state       :1780][INFO    ][6556] Running state [/etc/cron.deny] at time 16:13:06.111392
2018-11-28 16:13:06,111 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/cron.deny]
2018-11-28 16:13:06,112 [salt.state       :300 ][INFO    ][6556] File /etc/cron.deny is not present
2018-11-28 16:13:06,112 [salt.state       :1951][INFO    ][6556] Completed state [/etc/cron.deny] at time 16:13:06.112213 duration_in_ms=0.821
2018-11-28 16:13:06,113 [salt.state       :1780][INFO    ][6556] Running state [/etc/crontab] at time 16:13:06.113286
2018-11-28 16:13:06,113 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/crontab]
2018-11-28 16:13:06,114 [salt.state       :300 ][INFO    ][6556] File /etc/crontab exists with proper permissions. No changes made.
2018-11-28 16:13:06,114 [salt.state       :1951][INFO    ][6556] Completed state [/etc/crontab] at time 16:13:06.114613 duration_in_ms=1.327
2018-11-28 16:13:06,115 [salt.state       :1780][INFO    ][6556] Running state [/etc/cron.d] at time 16:13:06.115664
2018-11-28 16:13:06,115 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/cron.d]
2018-11-28 16:13:06,117 [salt.state       :300 ][INFO    ][6556] Directory /etc/cron.d is in the correct state
Directory /etc/cron.d updated
2018-11-28 16:13:06,117 [salt.state       :1951][INFO    ][6556] Completed state [/etc/cron.d] at time 16:13:06.117205 duration_in_ms=1.541
2018-11-28 16:13:06,118 [salt.state       :1780][INFO    ][6556] Running state [/etc/cron.daily] at time 16:13:06.118882
2018-11-28 16:13:06,119 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/cron.daily]
2018-11-28 16:13:06,120 [salt.state       :300 ][INFO    ][6556] Directory /etc/cron.daily is in the correct state
Directory /etc/cron.daily updated
2018-11-28 16:13:06,120 [salt.state       :1951][INFO    ][6556] Completed state [/etc/cron.daily] at time 16:13:06.120539 duration_in_ms=1.657
2018-11-28 16:13:06,121 [salt.state       :1780][INFO    ][6556] Running state [/etc/cron.hourly] at time 16:13:06.121580
2018-11-28 16:13:06,121 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/cron.hourly]
2018-11-28 16:13:06,123 [salt.state       :300 ][INFO    ][6556] Directory /etc/cron.hourly is in the correct state
Directory /etc/cron.hourly updated
2018-11-28 16:13:06,123 [salt.state       :1951][INFO    ][6556] Completed state [/etc/cron.hourly] at time 16:13:06.123338 duration_in_ms=1.758
2018-11-28 16:13:06,124 [salt.state       :1780][INFO    ][6556] Running state [/etc/cron.monthly] at time 16:13:06.124394
2018-11-28 16:13:06,124 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/cron.monthly]
2018-11-28 16:13:06,125 [salt.state       :300 ][INFO    ][6556] Directory /etc/cron.monthly is in the correct state
Directory /etc/cron.monthly updated
2018-11-28 16:13:06,125 [salt.state       :1951][INFO    ][6556] Completed state [/etc/cron.monthly] at time 16:13:06.125861 duration_in_ms=1.467
2018-11-28 16:13:06,126 [salt.state       :1780][INFO    ][6556] Running state [/etc/cron.weekly] at time 16:13:06.126951
2018-11-28 16:13:06,127 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/cron.weekly]
2018-11-28 16:13:06,128 [salt.state       :300 ][INFO    ][6556] Directory /etc/cron.weekly is in the correct state
Directory /etc/cron.weekly updated
2018-11-28 16:13:06,128 [salt.state       :1951][INFO    ][6556] Completed state [/etc/cron.weekly] at time 16:13:06.128438 duration_in_ms=1.487
2018-11-28 16:13:06,132 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 16:13:06.131994
2018-11-28 16:13:06,132 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-11-28 16:13:06,156 [salt.state       :300 ][INFO    ][6556] File /etc/apt/apt.conf.d/99prefer_ipv4-salt is in the correct state
2018-11-28 16:13:06,156 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 16:13:06.156503 duration_in_ms=24.509
2018-11-28 16:13:06,156 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 16:13:06.156749
2018-11-28 16:13:06,157 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-11-28 16:13:06,179 [salt.state       :300 ][INFO    ][6556] File /etc/apt/apt.conf.d/99allow_downgrades-salt is in the correct state
2018-11-28 16:13:06,179 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 16:13:06.179637 duration_in_ms=22.888
2018-11-28 16:13:06,181 [salt.state       :1780][INFO    ][6556] Running state [linux_repo_prereq_pkgs] at time 16:13:06.181417
2018-11-28 16:13:06,181 [salt.state       :1813][INFO    ][6556] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-11-28 16:13:06,193 [salt.state       :300 ][INFO    ][6556] All specified packages are already installed
2018-11-28 16:13:06,194 [salt.state       :1951][INFO    ][6556] Completed state [linux_repo_prereq_pkgs] at time 16:13:06.194220 duration_in_ms=12.803
2018-11-28 16:13:06,194 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 16:13:06.194470
2018-11-28 16:13:06,194 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-11-28 16:13:06,195 [salt.state       :300 ][INFO    ][6556] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-11-28 16:13:06,195 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 16:13:06.195198 duration_in_ms=0.728
2018-11-28 16:13:06,195 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 16:13:06.195427
2018-11-28 16:13:06,195 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-11-28 16:13:06,195 [salt.state       :300 ][INFO    ][6556] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-11-28 16:13:06,196 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 16:13:06.196137 duration_in_ms=0.71
2018-11-28 16:13:06,196 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 16:13:06.196364
2018-11-28 16:13:06,196 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-11-28 16:13:06,335 [salt.state       :300 ][INFO    ][6556] File /etc/apt/preferences.d/mirantis_openstack is in the correct state
2018-11-28 16:13:06,336 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 16:13:06.335980 duration_in_ms=139.616
2018-11-28 16:13:06,339 [salt.state       :1780][INFO    ][6556] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 16:13:06.339067
2018-11-28 16:13:06,339 [salt.state       :1813][INFO    ][6556] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-11-28 16:13:06,384 [salt.state       :300 ][INFO    ][6556] Package repo 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main' already configured
2018-11-28 16:13:06,384 [salt.state       :1951][INFO    ][6556] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 16:13:06.384880 duration_in_ms=45.813
2018-11-28 16:13:06,385 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 16:13:06.385149
2018-11-28 16:13:06,385 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-11-28 16:13:06,385 [salt.state       :300 ][INFO    ][6556] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-11-28 16:13:06,385 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 16:13:06.385941 duration_in_ms=0.792
2018-11-28 16:13:06,386 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/preferences.d/uca] at time 16:13:06.386211
2018-11-28 16:13:06,386 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-11-28 16:13:06,527 [salt.state       :300 ][INFO    ][6556] File /etc/apt/preferences.d/uca is in the correct state
2018-11-28 16:13:06,527 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/preferences.d/uca] at time 16:13:06.527423 duration_in_ms=141.211
2018-11-28 16:13:06,527 [salt.state       :1780][INFO    ][6556] Running state [echo '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' | base64 -d | apt-key add -] at time 16:13:06.527723
2018-11-28 16:13:06,528 [salt.state       :1813][INFO    ][6556] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-11-28 16:13:06,528 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-11-28 16:13:06,686 [salt.state       :300 ][INFO    ][6556] {'pid': 6778, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-11-28 16:13:06,687 [salt.state       :1951][INFO    ][6556] Completed state [echo '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' | base64 -d | apt-key add -] at time 16:13:06.687011 duration_in_ms=159.288
2018-11-28 16:13:06,692 [salt.state       :1780][INFO    ][6556] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 16:13:06.692172
2018-11-28 16:13:06,692 [salt.state       :1813][INFO    ][6556] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-11-28 16:13:06,737 [salt.state       :300 ][INFO    ][6556] Package repo 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main' already configured
2018-11-28 16:13:06,737 [salt.state       :1951][INFO    ][6556] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 16:13:06.737474 duration_in_ms=45.302
2018-11-28 16:13:06,737 [salt.state       :1780][INFO    ][6556] Running state [pkg.refresh_db] at time 16:13:06.737754
2018-11-28 16:13:06,738 [salt.state       :1813][INFO    ][6556] Executing state module.run for [pkg.refresh_db]
2018-11-28 16:13:06,738 [salt.utils.decorators:613 ][WARNING ][6556] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-28 16:13:06,739 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 16:13:08,869 [salt.state       :300 ][INFO    ][6556] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': None}}
2018-11-28 16:13:08,870 [salt.state       :1951][INFO    ][6556] Completed state [pkg.refresh_db] at time 16:13:08.870544 duration_in_ms=2132.789
2018-11-28 16:13:08,871 [salt.state       :1780][INFO    ][6556] Running state [linux_extra_packages_removed] at time 16:13:08.871114
2018-11-28 16:13:08,871 [salt.state       :1813][INFO    ][6556] Executing state pkg.removed for [linux_extra_packages_removed]
2018-11-28 16:13:08,893 [salt.state       :300 ][INFO    ][6556] All specified packages are already absent
2018-11-28 16:13:08,893 [salt.state       :1951][INFO    ][6556] Completed state [linux_extra_packages_removed] at time 16:13:08.893810 duration_in_ms=22.695
2018-11-28 16:13:08,894 [salt.state       :1780][INFO    ][6556] Running state [linux_extra_packages_latest] at time 16:13:08.894394
2018-11-28 16:13:08,894 [salt.state       :1813][INFO    ][6556] Executing state pkg.latest for [linux_extra_packages_latest]
2018-11-28 16:13:08,910 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-11-28 16:13:09,062 [salt.state       :300 ][INFO    ][6556] Package python-tornado is already up-to-date
2018-11-28 16:13:09,063 [salt.state       :1951][INFO    ][6556] Completed state [linux_extra_packages_latest] at time 16:13:09.062937 duration_in_ms=168.542
2018-11-28 16:13:09,063 [salt.state       :1780][INFO    ][6556] Running state [UTC] at time 16:13:09.063383
2018-11-28 16:13:09,063 [salt.state       :1813][INFO    ][6556] Executing state timezone.system for [UTC]
2018-11-28 16:13:09,064 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['timedatectl'] in directory '/root'
2018-11-28 16:13:09,098 [salt.state       :300 ][INFO    ][6556] Timezone UTC already set, UTC already set to UTC
2018-11-28 16:13:09,099 [salt.state       :1951][INFO    ][6556] Completed state [UTC] at time 16:13:09.099241 duration_in_ms=35.857
2018-11-28 16:13:09,099 [salt.state       :1780][INFO    ][6556] Running state [/etc/default/grub.d] at time 16:13:09.099717
2018-11-28 16:13:09,100 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/default/grub.d]
2018-11-28 16:13:09,101 [salt.state       :300 ][INFO    ][6556] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-11-28 16:13:09,101 [salt.state       :1951][INFO    ][6556] Completed state [/etc/default/grub.d] at time 16:13:09.101664 duration_in_ms=1.947
2018-11-28 16:13:09,101 [salt.state       :1780][INFO    ][6556] Running state [update-grub] at time 16:13:09.101917
2018-11-28 16:13:09,102 [salt.state       :1813][INFO    ][6556] Executing state cmd.wait for [update-grub]
2018-11-28 16:13:09,102 [salt.state       :300 ][INFO    ][6556] No changes made for update-grub
2018-11-28 16:13:09,103 [salt.state       :1951][INFO    ][6556] Completed state [update-grub] at time 16:13:09.102998 duration_in_ms=1.081
2018-11-28 16:13:09,105 [salt.state       :1780][INFO    ][6556] Running state [/boot/grub/grub.cfg] at time 16:13:09.105487
2018-11-28 16:13:09,105 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/boot/grub/grub.cfg]
2018-11-28 16:13:09,113 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-11-28 16:13:09,128 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:09,129 [salt.state       :300 ][INFO    ][6556] File /boot/grub/grub.cfg exists with proper permissions. No changes made.
2018-11-28 16:13:09,130 [salt.state       :1951][INFO    ][6556] Completed state [/boot/grub/grub.cfg] at time 16:13:09.130483 duration_in_ms=24.995
2018-11-28 16:13:09,130 [salt.state       :1780][INFO    ][6556] Running state [nf_conntrack] at time 16:13:09.130910
2018-11-28 16:13:09,131 [salt.state       :1813][INFO    ][6556] Executing state kmod.present for [nf_conntrack]
2018-11-28 16:13:09,132 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'lsmod' in directory '/root'
2018-11-28 16:13:09,148 [salt.state       :300 ][INFO    ][6556] Kernel module nf_conntrack is already present
2018-11-28 16:13:09,148 [salt.state       :1951][INFO    ][6556] Completed state [nf_conntrack] at time 16:13:09.148804 duration_in_ms=17.894
2018-11-28 16:13:09,149 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d] at time 16:13:09.149207
2018-11-28 16:13:09,149 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/modprobe.d]
2018-11-28 16:13:09,150 [salt.state       :300 ][INFO    ][6556] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2018-11-28 16:13:09,151 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d] at time 16:13:09.151067 duration_in_ms=1.86
2018-11-28 16:13:09,153 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/hfsplus.conf] at time 16:13:09.153594
2018-11-28 16:13:09,153 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2018-11-28 16:13:09,316 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/hfsplus.conf is in the correct state
2018-11-28 16:13:09,316 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/hfsplus.conf] at time 16:13:09.316343 duration_in_ms=162.748
2018-11-28 16:13:09,317 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/rds.conf] at time 16:13:09.317899
2018-11-28 16:13:09,318 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2018-11-28 16:13:09,471 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/rds.conf is in the correct state
2018-11-28 16:13:09,471 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/rds.conf] at time 16:13:09.471855 duration_in_ms=153.955
2018-11-28 16:13:09,473 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/cramfs.conf] at time 16:13:09.473435
2018-11-28 16:13:09,473 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2018-11-28 16:13:09,635 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/cramfs.conf is in the correct state
2018-11-28 16:13:09,635 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/cramfs.conf] at time 16:13:09.635678 duration_in_ms=162.242
2018-11-28 16:13:09,637 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/freevxfs.conf] at time 16:13:09.637247
2018-11-28 16:13:09,637 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2018-11-28 16:13:09,790 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/freevxfs.conf is in the correct state
2018-11-28 16:13:09,791 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/freevxfs.conf] at time 16:13:09.791147 duration_in_ms=153.899
2018-11-28 16:13:09,792 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/hfs.conf] at time 16:13:09.792721
2018-11-28 16:13:09,793 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2018-11-28 16:13:09,976 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/hfs.conf is in the correct state
2018-11-28 16:13:09,976 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/hfs.conf] at time 16:13:09.976386 duration_in_ms=183.664
2018-11-28 16:13:09,977 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/squashfs.conf] at time 16:13:09.977947
2018-11-28 16:13:09,978 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2018-11-28 16:13:10,161 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/squashfs.conf is in the correct state
2018-11-28 16:13:10,162 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/squashfs.conf] at time 16:13:10.162743 duration_in_ms=184.796
2018-11-28 16:13:10,164 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/udf.conf] at time 16:13:10.164238
2018-11-28 16:13:10,164 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2018-11-28 16:13:10,320 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/udf.conf is in the correct state
2018-11-28 16:13:10,321 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/udf.conf] at time 16:13:10.321231 duration_in_ms=156.992
2018-11-28 16:13:10,322 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/vfat.conf] at time 16:13:10.322815
2018-11-28 16:13:10,323 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2018-11-28 16:13:10,476 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/vfat.conf is in the correct state
2018-11-28 16:13:10,476 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/vfat.conf] at time 16:13:10.476323 duration_in_ms=153.508
2018-11-28 16:13:10,477 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/sctp.conf] at time 16:13:10.477897
2018-11-28 16:13:10,478 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2018-11-28 16:13:10,634 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/sctp.conf is in the correct state
2018-11-28 16:13:10,634 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/sctp.conf] at time 16:13:10.634818 duration_in_ms=156.92
2018-11-28 16:13:10,636 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/jffs2.conf] at time 16:13:10.636430
2018-11-28 16:13:10,636 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2018-11-28 16:13:10,794 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/jffs2.conf is in the correct state
2018-11-28 16:13:10,794 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/jffs2.conf] at time 16:13:10.794793 duration_in_ms=158.362
2018-11-28 16:13:10,796 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/tipc.conf] at time 16:13:10.796341
2018-11-28 16:13:10,796 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2018-11-28 16:13:11,043 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/tipc.conf is in the correct state
2018-11-28 16:13:11,043 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/tipc.conf] at time 16:13:11.043666 duration_in_ms=247.325
2018-11-28 16:13:11,045 [salt.state       :1780][INFO    ][6556] Running state [/etc/modprobe.d/dccp.conf] at time 16:13:11.045204
2018-11-28 16:13:11,045 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2018-11-28 16:13:11,204 [salt.state       :300 ][INFO    ][6556] File /etc/modprobe.d/dccp.conf is in the correct state
2018-11-28 16:13:11,205 [salt.state       :1951][INFO    ][6556] Completed state [/etc/modprobe.d/dccp.conf] at time 16:13:11.205335 duration_in_ms=160.13
2018-11-28 16:13:11,205 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_congestion_control] at time 16:13:11.205628
2018-11-28 16:13:11,205 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-11-28 16:13:11,207 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_congestion_control' in directory '/root'
2018-11-28 16:13:11,224 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_congestion_control = yeah is already set
2018-11-28 16:13:11,225 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_congestion_control] at time 16:13:11.225419 duration_in_ms=19.79
2018-11-28 16:13:11,225 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_slow_start_after_idle] at time 16:13:11.225888
2018-11-28 16:13:11,226 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-11-28 16:13:11,227 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_slow_start_after_idle' in directory '/root'
2018-11-28 16:13:11,244 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_slow_start_after_idle = 0 is already set
2018-11-28 16:13:11,245 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 16:13:11.245035 duration_in_ms=19.146
2018-11-28 16:13:11,245 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 16:13:11.245504
2018-11-28 16:13:11,245 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2018-11-28 16:13:11,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.icmp_echo_ignore_broadcasts' in directory '/root'
2018-11-28 16:13:11,263 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.icmp_echo_ignore_broadcasts = 1 is already set
2018-11-28 16:13:11,264 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 16:13:11.264117 duration_in_ms=18.613
2018-11-28 16:13:11,264 [salt.state       :1780][INFO    ][6556] Running state [net.nf_conntrack_max] at time 16:13:11.264586
2018-11-28 16:13:11,265 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.nf_conntrack_max]
2018-11-28 16:13:11,267 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.nf_conntrack_max' in directory '/root'
2018-11-28 16:13:11,283 [salt.state       :300 ][INFO    ][6556] Sysctl value net.nf_conntrack_max = 1048576 is already set
2018-11-28 16:13:11,284 [salt.state       :1951][INFO    ][6556] Completed state [net.nf_conntrack_max] at time 16:13:11.284205 duration_in_ms=19.619
2018-11-28 16:13:11,284 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 16:13:11.284684
2018-11-28 16:13:11,285 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2018-11-28 16:13:11,286 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.icmp_ignore_bogus_error_responses' in directory '/root'
2018-11-28 16:13:11,304 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.icmp_ignore_bogus_error_responses = 1 is already set
2018-11-28 16:13:11,305 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 16:13:11.304933 duration_in_ms=20.248
2018-11-28 16:13:11,305 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.default.log_martians] at time 16:13:11.305429
2018-11-28 16:13:11,305 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2018-11-28 16:13:11,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.default.log_martians' in directory '/root'
2018-11-28 16:13:11,327 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.default.log_martians = 1 is already set
2018-11-28 16:13:11,327 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.default.log_martians] at time 16:13:11.327861 duration_in_ms=22.431
2018-11-28 16:13:11,328 [salt.state       :1780][INFO    ][6556] Running state [net.core.somaxconn] at time 16:13:11.328349
2018-11-28 16:13:11,328 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.core.somaxconn]
2018-11-28 16:13:11,329 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.core.somaxconn' in directory '/root'
2018-11-28 16:13:11,348 [salt.state       :300 ][INFO    ][6556] Sysctl value net.core.somaxconn = 4096 is already set
2018-11-28 16:13:11,348 [salt.state       :1951][INFO    ][6556] Completed state [net.core.somaxconn] at time 16:13:11.348758 duration_in_ms=20.408
2018-11-28 16:13:11,349 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.all.send_redirects] at time 16:13:11.349251
2018-11-28 16:13:11,349 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2018-11-28 16:13:11,351 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.all.send_redirects' in directory '/root'
2018-11-28 16:13:11,368 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.all.send_redirects = 0 is already set
2018-11-28 16:13:11,369 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.all.send_redirects] at time 16:13:11.369106 duration_in_ms=19.854
2018-11-28 16:13:11,369 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_tw_reuse] at time 16:13:11.369576
2018-11-28 16:13:11,370 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-11-28 16:13:11,371 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_tw_reuse' in directory '/root'
2018-11-28 16:13:11,388 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_tw_reuse = 1 is already set
2018-11-28 16:13:11,389 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_tw_reuse] at time 16:13:11.389439 duration_in_ms=19.862
2018-11-28 16:13:11,389 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.default.rp_filter] at time 16:13:11.389917
2018-11-28 16:13:11,390 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2018-11-28 16:13:11,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.default.rp_filter' in directory '/root'
2018-11-28 16:13:11,406 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.default.rp_filter = 1 is already set
2018-11-28 16:13:11,407 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.default.rp_filter] at time 16:13:11.407442 duration_in_ms=17.525
2018-11-28 16:13:11,407 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_fin_timeout] at time 16:13:11.407901
2018-11-28 16:13:11,408 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-11-28 16:13:11,409 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_fin_timeout' in directory '/root'
2018-11-28 16:13:11,427 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_fin_timeout = 30 is already set
2018-11-28 16:13:11,427 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_fin_timeout] at time 16:13:11.427810 duration_in_ms=19.908
2018-11-28 16:13:11,428 [salt.state       :1780][INFO    ][6556] Running state [kernel.panic] at time 16:13:11.428271
2018-11-28 16:13:11,428 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [kernel.panic]
2018-11-28 16:13:11,429 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n kernel.panic' in directory '/root'
2018-11-28 16:13:11,447 [salt.state       :300 ][INFO    ][6556] Sysctl value kernel.panic = 60 is already set
2018-11-28 16:13:11,447 [salt.state       :1951][INFO    ][6556] Completed state [kernel.panic] at time 16:13:11.447832 duration_in_ms=19.56
2018-11-28 16:13:11,448 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_keepalive_probes] at time 16:13:11.448303
2018-11-28 16:13:11,448 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-11-28 16:13:11,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_keepalive_probes' in directory '/root'
2018-11-28 16:13:11,468 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_keepalive_probes = 8 is already set
2018-11-28 16:13:11,469 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_keepalive_probes] at time 16:13:11.468942 duration_in_ms=20.639
2018-11-28 16:13:11,469 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.all.log_martians] at time 16:13:11.469419
2018-11-28 16:13:11,469 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2018-11-28 16:13:11,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.all.log_martians' in directory '/root'
2018-11-28 16:13:11,489 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.all.log_martians = 1 is already set
2018-11-28 16:13:11,491 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.all.log_martians] at time 16:13:11.491103 duration_in_ms=21.683
2018-11-28 16:13:11,491 [salt.state       :1780][INFO    ][6556] Running state [fs.suid_dumpable] at time 16:13:11.491583
2018-11-28 16:13:11,491 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [fs.suid_dumpable]
2018-11-28 16:13:11,493 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n fs.suid_dumpable' in directory '/root'
2018-11-28 16:13:11,512 [salt.state       :300 ][INFO    ][6556] Sysctl value fs.suid_dumpable = 0 is already set
2018-11-28 16:13:11,513 [salt.state       :1951][INFO    ][6556] Completed state [fs.suid_dumpable] at time 16:13:11.513107 duration_in_ms=21.522
2018-11-28 16:13:11,513 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.default.accept_redirects] at time 16:13:11.513574
2018-11-28 16:13:11,513 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2018-11-28 16:13:11,515 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.default.accept_redirects' in directory '/root'
2018-11-28 16:13:11,532 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.default.accept_redirects = 0 is already set
2018-11-28 16:13:11,533 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.default.accept_redirects] at time 16:13:11.533194 duration_in_ms=19.619
2018-11-28 16:13:11,533 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.default.secure_redirects] at time 16:13:11.533639
2018-11-28 16:13:11,534 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2018-11-28 16:13:11,535 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.default.secure_redirects' in directory '/root'
2018-11-28 16:13:11,551 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.default.secure_redirects = 0 is already set
2018-11-28 16:13:11,552 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.default.secure_redirects] at time 16:13:11.552214 duration_in_ms=18.575
2018-11-28 16:13:11,552 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.default.accept_source_route] at time 16:13:11.552688
2018-11-28 16:13:11,553 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2018-11-28 16:13:11,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.default.accept_source_route' in directory '/root'
2018-11-28 16:13:11,571 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.default.accept_source_route = 0 is already set
2018-11-28 16:13:11,572 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.default.accept_source_route] at time 16:13:11.572343 duration_in_ms=19.655
2018-11-28 16:13:11,572 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_keepalive_intvl] at time 16:13:11.572815
2018-11-28 16:13:11,573 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-11-28 16:13:11,574 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_keepalive_intvl' in directory '/root'
2018-11-28 16:13:11,589 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_keepalive_intvl = 3 is already set
2018-11-28 16:13:11,591 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_keepalive_intvl] at time 16:13:11.591863 duration_in_ms=19.047
2018-11-28 16:13:11,592 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_keepalive_time] at time 16:13:11.592310
2018-11-28 16:13:11,592 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-11-28 16:13:11,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_keepalive_time' in directory '/root'
2018-11-28 16:13:11,609 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_keepalive_time = 30 is already set
2018-11-28 16:13:11,609 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_keepalive_time] at time 16:13:11.609881 duration_in_ms=17.571
2018-11-28 16:13:11,610 [salt.state       :1780][INFO    ][6556] Running state [kernel.randomize_va_space] at time 16:13:11.610954
2018-11-28 16:13:11,611 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [kernel.randomize_va_space]
2018-11-28 16:13:11,612 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n kernel.randomize_va_space' in directory '/root'
2018-11-28 16:13:11,629 [salt.state       :300 ][INFO    ][6556] Sysctl value kernel.randomize_va_space = 2 is already set
2018-11-28 16:13:11,630 [salt.state       :1951][INFO    ][6556] Completed state [kernel.randomize_va_space] at time 16:13:11.630805 duration_in_ms=19.85
2018-11-28 16:13:11,631 [salt.state       :1780][INFO    ][6556] Running state [fs.file-max] at time 16:13:11.631251
2018-11-28 16:13:11,631 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [fs.file-max]
2018-11-28 16:13:11,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n fs.file-max' in directory '/root'
2018-11-28 16:13:11,648 [salt.state       :300 ][INFO    ][6556] Sysctl value fs.file-max = 124165 is already set
2018-11-28 16:13:11,649 [salt.state       :1951][INFO    ][6556] Completed state [fs.file-max] at time 16:13:11.649010 duration_in_ms=17.758
2018-11-28 16:13:11,649 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_syncookies] at time 16:13:11.649468
2018-11-28 16:13:11,649 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2018-11-28 16:13:11,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_syncookies' in directory '/root'
2018-11-28 16:13:11,670 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_syncookies = 1 is already set
2018-11-28 16:13:11,671 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_syncookies] at time 16:13:11.671455 duration_in_ms=21.986
2018-11-28 16:13:11,671 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_max_syn_backlog] at time 16:13:11.671942
2018-11-28 16:13:11,672 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-11-28 16:13:11,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_max_syn_backlog' in directory '/root'
2018-11-28 16:13:11,692 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_max_syn_backlog = 8192 is already set
2018-11-28 16:13:11,693 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_max_syn_backlog] at time 16:13:11.693361 duration_in_ms=21.419
2018-11-28 16:13:11,693 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.all.rp_filter] at time 16:13:11.693844
2018-11-28 16:13:11,694 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2018-11-28 16:13:11,695 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.all.rp_filter' in directory '/root'
2018-11-28 16:13:11,713 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.all.rp_filter = 1 is already set
2018-11-28 16:13:11,713 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.all.rp_filter] at time 16:13:11.713877 duration_in_ms=20.033
2018-11-28 16:13:11,715 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.all.accept_source_route] at time 16:13:11.715488
2018-11-28 16:13:11,715 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2018-11-28 16:13:11,717 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.all.accept_source_route' in directory '/root'
2018-11-28 16:13:11,733 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.all.accept_source_route = 0 is already set
2018-11-28 16:13:11,735 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.all.accept_source_route] at time 16:13:11.733949 duration_in_ms=18.461
2018-11-28 16:13:11,735 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.tcp_retries2] at time 16:13:11.735874
2018-11-28 16:13:11,736 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-11-28 16:13:11,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.tcp_retries2' in directory '/root'
2018-11-28 16:13:11,752 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.tcp_retries2 = 5 is already set
2018-11-28 16:13:11,752 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.tcp_retries2] at time 16:13:11.752750 duration_in_ms=16.876
2018-11-28 16:13:11,753 [salt.state       :1780][INFO    ][6556] Running state [net.core.netdev_max_backlog] at time 16:13:11.753205
2018-11-28 16:13:11,753 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-11-28 16:13:11,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.core.netdev_max_backlog' in directory '/root'
2018-11-28 16:13:11,772 [salt.state       :300 ][INFO    ][6556] Sysctl value net.core.netdev_max_backlog = 261144 is already set
2018-11-28 16:13:11,773 [salt.state       :1951][INFO    ][6556] Completed state [net.core.netdev_max_backlog] at time 16:13:11.773378 duration_in_ms=20.173
2018-11-28 16:13:11,773 [salt.state       :1780][INFO    ][6556] Running state [vm.swappiness] at time 16:13:11.773837
2018-11-28 16:13:11,775 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [vm.swappiness]
2018-11-28 16:13:11,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n vm.swappiness' in directory '/root'
2018-11-28 16:13:11,791 [salt.state       :300 ][INFO    ][6556] Sysctl value vm.swappiness = 10 is already set
2018-11-28 16:13:11,791 [salt.state       :1951][INFO    ][6556] Completed state [vm.swappiness] at time 16:13:11.791642 duration_in_ms=17.804
2018-11-28 16:13:11,792 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.all.secure_redirects] at time 16:13:11.792077
2018-11-28 16:13:11,792 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2018-11-28 16:13:11,793 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.all.secure_redirects' in directory '/root'
2018-11-28 16:13:11,811 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.all.secure_redirects = 0 is already set
2018-11-28 16:13:11,811 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.all.secure_redirects] at time 16:13:11.811499 duration_in_ms=19.422
2018-11-28 16:13:11,811 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.neigh.default.gc_thresh1] at time 16:13:11.811921
2018-11-28 16:13:11,812 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-11-28 16:13:11,813 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh1' in directory '/root'
2018-11-28 16:13:11,828 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.neigh.default.gc_thresh1 = 4096 is already set
2018-11-28 16:13:11,829 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 16:13:11.829211 duration_in_ms=17.29
2018-11-28 16:13:11,829 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.neigh.default.gc_thresh2] at time 16:13:11.829650
2018-11-28 16:13:11,831 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-11-28 16:13:11,832 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh2' in directory '/root'
2018-11-28 16:13:11,849 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.neigh.default.gc_thresh2 = 8192 is already set
2018-11-28 16:13:11,849 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 16:13:11.849831 duration_in_ms=20.181
2018-11-28 16:13:11,850 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.neigh.default.gc_thresh3] at time 16:13:11.850892
2018-11-28 16:13:11,851 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-11-28 16:13:11,852 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh3' in directory '/root'
2018-11-28 16:13:11,869 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.neigh.default.gc_thresh3 = 16384 is already set
2018-11-28 16:13:11,870 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 16:13:11.869919 duration_in_ms=19.026
2018-11-28 16:13:11,871 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.default.send_redirects] at time 16:13:11.871319
2018-11-28 16:13:11,871 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2018-11-28 16:13:11,872 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.default.send_redirects' in directory '/root'
2018-11-28 16:13:11,888 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.default.send_redirects = 0 is already set
2018-11-28 16:13:11,889 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.default.send_redirects] at time 16:13:11.889443 duration_in_ms=18.123
2018-11-28 16:13:11,889 [salt.state       :1780][INFO    ][6556] Running state [net.ipv4.conf.all.accept_redirects] at time 16:13:11.889891
2018-11-28 16:13:11,891 [salt.state       :1813][INFO    ][6556] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2018-11-28 16:13:11,892 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'sysctl -n net.ipv4.conf.all.accept_redirects' in directory '/root'
2018-11-28 16:13:11,910 [salt.state       :300 ][INFO    ][6556] Sysctl value net.ipv4.conf.all.accept_redirects = 0 is already set
2018-11-28 16:13:11,911 [salt.state       :1951][INFO    ][6556] Completed state [net.ipv4.conf.all.accept_redirects] at time 16:13:11.911167 duration_in_ms=21.275
2018-11-28 16:13:11,911 [salt.state       :1780][INFO    ][6556] Running state [linux_sysfs_package] at time 16:13:11.911675
2018-11-28 16:13:11,912 [salt.state       :1813][INFO    ][6556] Executing state pkg.installed for [linux_sysfs_package]
2018-11-28 16:13:11,927 [salt.state       :300 ][INFO    ][6556] All specified packages are already installed
2018-11-28 16:13:11,927 [salt.state       :1951][INFO    ][6556] Completed state [linux_sysfs_package] at time 16:13:11.927930 duration_in_ms=16.255
2018-11-28 16:13:11,931 [salt.state       :1780][INFO    ][6556] Running state [/etc/sysfs.d] at time 16:13:11.931340
2018-11-28 16:13:11,931 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/etc/sysfs.d]
2018-11-28 16:13:11,932 [salt.state       :300 ][INFO    ][6556] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-11-28 16:13:11,932 [salt.state       :1951][INFO    ][6556] Completed state [/etc/sysfs.d] at time 16:13:11.932709 duration_in_ms=1.369
2018-11-28 16:13:11,934 [salt.state       :1780][INFO    ][6556] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 16:13:11.934338
2018-11-28 16:13:11,934 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2018-11-28 16:13:11,966 [salt.state       :300 ][INFO    ][6556] File /etc/sysfs.d/transparent_hugepages.conf is in the correct state
2018-11-28 16:13:11,967 [salt.state       :1951][INFO    ][6556] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 16:13:11.967107 duration_in_ms=32.769
2018-11-28 16:13:11,967 [salt.state       :1780][INFO    ][6556] Running state [sysfs.write] at time 16:13:11.967397
2018-11-28 16:13:11,967 [salt.state       :1813][INFO    ][6556] Executing state module.run for [sysfs.write]
2018-11-28 16:13:11,968 [salt.utils.decorators:613 ][WARNING ][6556] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-28 16:13:11,968 [salt.state       :300 ][INFO    ][6556] {'ret': True}
2018-11-28 16:13:11,968 [salt.state       :1951][INFO    ][6556] Completed state [sysfs.write] at time 16:13:11.968840 duration_in_ms=1.443
2018-11-28 16:13:11,969 [salt.state       :1780][INFO    ][6556] Running state [ondemand] at time 16:13:11.969074
2018-11-28 16:13:11,969 [salt.state       :1813][INFO    ][6556] Executing state service.dead for [ondemand]
2018-11-28 16:13:11,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-11-28 16:13:11,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-28 16:13:12,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-28 16:13:12,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'runlevel' in directory '/root'
2018-11-28 16:13:12,076 [salt.state       :300 ][INFO    ][6556] The service ondemand is already dead
2018-11-28 16:13:12,077 [salt.state       :1951][INFO    ][6556] Completed state [ondemand] at time 16:13:12.076931 duration_in_ms=107.856
2018-11-28 16:13:12,077 [salt.state       :1780][INFO    ][6556] Running state [en_US.UTF-8] at time 16:13:12.077386
2018-11-28 16:13:12,077 [salt.state       :1813][INFO    ][6556] Executing state locale.present for [en_US.UTF-8]
2018-11-28 16:13:12,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'locale -a' in directory '/root'
2018-11-28 16:13:12,095 [salt.state       :300 ][INFO    ][6556] Locale en_US.UTF-8 is already present
2018-11-28 16:13:12,096 [salt.state       :1951][INFO    ][6556] Completed state [en_US.UTF-8] at time 16:13:12.096344 duration_in_ms=18.958
2018-11-28 16:13:12,100 [salt.state       :1780][INFO    ][6556] Running state [en_US.UTF-8] at time 16:13:12.100004
2018-11-28 16:13:12,100 [salt.state       :1813][INFO    ][6556] Executing state locale.system for [en_US.UTF-8]
2018-11-28 16:13:12,101 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'localectl' in directory '/root'
2018-11-28 16:13:12,135 [salt.state       :300 ][INFO    ][6556] System locale en_US.UTF-8 already set
2018-11-28 16:13:12,136 [salt.state       :1951][INFO    ][6556] Completed state [en_US.UTF-8] at time 16:13:12.136031 duration_in_ms=36.028
2018-11-28 16:13:12,136 [salt.state       :1780][INFO    ][6556] Running state [root] at time 16:13:12.136501
2018-11-28 16:13:12,136 [salt.state       :1813][INFO    ][6556] Executing state group.present for [root]
2018-11-28 16:13:12,137 [salt.state       :300 ][INFO    ][6556] Group root is present and up to date
2018-11-28 16:13:12,137 [salt.state       :1951][INFO    ][6556] Completed state [root] at time 16:13:12.137707 duration_in_ms=1.206
2018-11-28 16:13:12,140 [salt.state       :1780][INFO    ][6556] Running state [root] at time 16:13:12.140304
2018-11-28 16:13:12,140 [salt.state       :1813][INFO    ][6556] Executing state user.present for [root]
2018-11-28 16:13:12,143 [salt.state       :300 ][INFO    ][6556] User root is present and up to date
2018-11-28 16:13:12,143 [salt.state       :1951][INFO    ][6556] Completed state [root] at time 16:13:12.143340 duration_in_ms=3.036
2018-11-28 16:13:12,145 [salt.state       :1780][INFO    ][6556] Running state [/root] at time 16:13:12.145007
2018-11-28 16:13:12,145 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/root]
2018-11-28 16:13:12,146 [salt.state       :300 ][INFO    ][6556] Directory /root is in the correct state
Directory /root updated
2018-11-28 16:13:12,146 [salt.state       :1951][INFO    ][6556] Completed state [/root] at time 16:13:12.146455 duration_in_ms=1.448
2018-11-28 16:13:12,146 [salt.state       :1780][INFO    ][6556] Running state [/etc/sudoers.d/90-salt-user-root] at time 16:13:12.146708
2018-11-28 16:13:12,146 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-11-28 16:13:12,147 [salt.state       :300 ][INFO    ][6556] File /etc/sudoers.d/90-salt-user-root is not present
2018-11-28 16:13:12,147 [salt.state       :1951][INFO    ][6556] Completed state [/etc/sudoers.d/90-salt-user-root] at time 16:13:12.147496 duration_in_ms=0.788
2018-11-28 16:13:12,147 [salt.state       :1780][INFO    ][6556] Running state [ubuntu] at time 16:13:12.147728
2018-11-28 16:13:12,147 [salt.state       :1813][INFO    ][6556] Executing state group.present for [ubuntu]
2018-11-28 16:13:12,148 [salt.state       :300 ][INFO    ][6556] Group ubuntu is present and up to date
2018-11-28 16:13:12,148 [salt.state       :1951][INFO    ][6556] Completed state [ubuntu] at time 16:13:12.148504 duration_in_ms=0.776
2018-11-28 16:13:12,149 [salt.state       :1780][INFO    ][6556] Running state [ubuntu] at time 16:13:12.149884
2018-11-28 16:13:12,151 [salt.state       :1813][INFO    ][6556] Executing state user.present for [ubuntu]
2018-11-28 16:13:12,152 [salt.state       :300 ][INFO    ][6556] User ubuntu is present and up to date
2018-11-28 16:13:12,152 [salt.state       :1951][INFO    ][6556] Completed state [ubuntu] at time 16:13:12.152697 duration_in_ms=2.813
2018-11-28 16:13:12,154 [salt.state       :1780][INFO    ][6556] Running state [/home/ubuntu] at time 16:13:12.154948
2018-11-28 16:13:12,155 [salt.state       :1813][INFO    ][6556] Executing state file.directory for [/home/ubuntu]
2018-11-28 16:13:12,156 [salt.state       :300 ][INFO    ][6556] Directory /home/ubuntu is in the correct state
Directory /home/ubuntu updated
2018-11-28 16:13:12,156 [salt.state       :1951][INFO    ][6556] Completed state [/home/ubuntu] at time 16:13:12.156313 duration_in_ms=1.365
2018-11-28 16:13:12,157 [salt.state       :1780][INFO    ][6556] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 16:13:12.157750
2018-11-28 16:13:12,158 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-11-28 16:13:12,188 [salt.state       :300 ][INFO    ][6556] File /etc/sudoers.d/90-salt-user-ubuntu is in the correct state
2018-11-28 16:13:12,188 [salt.state       :1951][INFO    ][6556] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 16:13:12.188302 duration_in_ms=30.552
2018-11-28 16:13:12,188 [salt.state       :1780][INFO    ][6556] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 16:13:12.188570
2018-11-28 16:13:12,188 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2018-11-28 16:13:12,335 [salt.state       :300 ][INFO    ][6556] File /etc/security/limits.d/90-salt-cis.conf is in the correct state
2018-11-28 16:13:12,335 [salt.state       :1951][INFO    ][6556] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 16:13:12.335778 duration_in_ms=147.207
2018-11-28 16:13:12,336 [salt.state       :1780][INFO    ][6556] Running state [/etc/security/limits.d/90-salt-default.conf] at time 16:13:12.336058
2018-11-28 16:13:12,336 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-11-28 16:13:12,476 [salt.state       :300 ][INFO    ][6556] File /etc/security/limits.d/90-salt-default.conf is in the correct state
2018-11-28 16:13:12,476 [salt.state       :1951][INFO    ][6556] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 16:13:12.476693 duration_in_ms=140.634
2018-11-28 16:13:12,477 [salt.state       :1780][INFO    ][6556] Running state [autofs] at time 16:13:12.476996
2018-11-28 16:13:12,477 [salt.state       :1813][INFO    ][6556] Executing state service.disabled for [autofs]
2018-11-28 16:13:12,478 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2018-11-28 16:13:12,500 [salt.state       :300 ][INFO    ][6556] The named service autofs is not available
2018-11-28 16:13:12,500 [salt.state       :1951][INFO    ][6556] Completed state [autofs] at time 16:13:12.500651 duration_in_ms=23.654
2018-11-28 16:13:12,501 [salt.state       :1780][INFO    ][6556] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 16:13:12.501101
2018-11-28 16:13:12,501 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-11-28 16:13:12,644 [salt.state       :300 ][INFO    ][6556] File /etc/systemd/system.conf.d/90-salt.conf is in the correct state
2018-11-28 16:13:12,644 [salt.state       :1951][INFO    ][6556] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 16:13:12.644588 duration_in_ms=143.486
2018-11-28 16:13:12,647 [salt.state       :1780][INFO    ][6556] Running state [service.systemctl_reload] at time 16:13:12.647759
2018-11-28 16:13:12,648 [salt.state       :1813][INFO    ][6556] Executing state module.wait for [service.systemctl_reload]
2018-11-28 16:13:12,648 [salt.state       :300 ][INFO    ][6556] No changes made for service.systemctl_reload
2018-11-28 16:13:12,648 [salt.state       :1951][INFO    ][6556] Completed state [service.systemctl_reload] at time 16:13:12.648589 duration_in_ms=0.83
2018-11-28 16:13:12,648 [salt.state       :1780][INFO    ][6556] Running state [/etc/shadow] at time 16:13:12.648848
2018-11-28 16:13:12,649 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/shadow]
2018-11-28 16:13:12,649 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,650 [salt.state       :300 ][INFO    ][6556] File /etc/shadow exists with proper permissions. No changes made.
2018-11-28 16:13:12,651 [salt.state       :1951][INFO    ][6556] Completed state [/etc/shadow] at time 16:13:12.650980 duration_in_ms=2.132
2018-11-28 16:13:12,651 [salt.state       :1780][INFO    ][6556] Running state [/etc/gshadow] at time 16:13:12.651213
2018-11-28 16:13:12,651 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/gshadow]
2018-11-28 16:13:12,651 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,652 [salt.state       :300 ][INFO    ][6556] File /etc/gshadow exists with proper permissions. No changes made.
2018-11-28 16:13:12,652 [salt.state       :1951][INFO    ][6556] Completed state [/etc/gshadow] at time 16:13:12.652654 duration_in_ms=1.441
2018-11-28 16:13:12,652 [salt.state       :1780][INFO    ][6556] Running state [/etc/group-] at time 16:13:12.652885
2018-11-28 16:13:12,653 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/group-]
2018-11-28 16:13:12,653 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,654 [salt.state       :300 ][INFO    ][6556] File /etc/group- exists with proper permissions. No changes made.
2018-11-28 16:13:12,654 [salt.state       :1951][INFO    ][6556] Completed state [/etc/group-] at time 16:13:12.654882 duration_in_ms=1.997
2018-11-28 16:13:12,655 [salt.state       :1780][INFO    ][6556] Running state [/etc/shadow-] at time 16:13:12.655117
2018-11-28 16:13:12,655 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/shadow-]
2018-11-28 16:13:12,655 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,656 [salt.state       :300 ][INFO    ][6556] File /etc/shadow- exists with proper permissions. No changes made.
2018-11-28 16:13:12,656 [salt.state       :1951][INFO    ][6556] Completed state [/etc/shadow-] at time 16:13:12.656507 duration_in_ms=1.39
2018-11-28 16:13:12,656 [salt.state       :1780][INFO    ][6556] Running state [/etc/passwd-] at time 16:13:12.656735
2018-11-28 16:13:12,656 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/passwd-]
2018-11-28 16:13:12,657 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,657 [salt.state       :300 ][INFO    ][6556] File /etc/passwd- exists with proper permissions. No changes made.
2018-11-28 16:13:12,659 [salt.state       :1951][INFO    ][6556] Completed state [/etc/passwd-] at time 16:13:12.659242 duration_in_ms=2.507
2018-11-28 16:13:12,659 [salt.state       :1780][INFO    ][6556] Running state [/etc/passwd] at time 16:13:12.659480
2018-11-28 16:13:12,659 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/passwd]
2018-11-28 16:13:12,660 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,660 [salt.state       :300 ][INFO    ][6556] File /etc/passwd exists with proper permissions. No changes made.
2018-11-28 16:13:12,660 [salt.state       :1951][INFO    ][6556] Completed state [/etc/passwd] at time 16:13:12.660874 duration_in_ms=1.394
2018-11-28 16:13:12,661 [salt.state       :1780][INFO    ][6556] Running state [/etc/gshadow-] at time 16:13:12.661101
2018-11-28 16:13:12,661 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/gshadow-]
2018-11-28 16:13:12,661 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,662 [salt.state       :300 ][INFO    ][6556] File /etc/gshadow- exists with proper permissions. No changes made.
2018-11-28 16:13:12,662 [salt.state       :1951][INFO    ][6556] Completed state [/etc/gshadow-] at time 16:13:12.662518 duration_in_ms=1.417
2018-11-28 16:13:12,662 [salt.state       :1780][INFO    ][6556] Running state [/etc/group] at time 16:13:12.662747
2018-11-28 16:13:12,663 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/group]
2018-11-28 16:13:12,663 [salt.loaded.int.states.file:2298][WARNING ][6556] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-28 16:13:12,663 [salt.state       :300 ][INFO    ][6556] File /etc/group exists with proper permissions. No changes made.
2018-11-28 16:13:12,664 [salt.state       :1951][INFO    ][6556] Completed state [/etc/group] at time 16:13:12.664113 duration_in_ms=1.366
2018-11-28 16:13:12,664 [salt.state       :1780][INFO    ][6556] Running state [/etc/issue] at time 16:13:12.664369
2018-11-28 16:13:12,664 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/issue]
2018-11-28 16:13:12,666 [salt.state       :300 ][INFO    ][6556] File /etc/issue is in the correct state
2018-11-28 16:13:12,667 [salt.state       :1951][INFO    ][6556] Completed state [/etc/issue] at time 16:13:12.667089 duration_in_ms=2.72
2018-11-28 16:13:12,667 [salt.state       :1780][INFO    ][6556] Running state [/etc/hostname] at time 16:13:12.667376
2018-11-28 16:13:12,667 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/hostname]
2018-11-28 16:13:12,689 [salt.state       :300 ][INFO    ][6556] File /etc/hostname is in the correct state
2018-11-28 16:13:12,689 [salt.state       :1951][INFO    ][6556] Completed state [/etc/hostname] at time 16:13:12.689382 duration_in_ms=22.006
2018-11-28 16:13:12,691 [salt.state       :1780][INFO    ][6556] Running state [hostname mdb03] at time 16:13:12.691696
2018-11-28 16:13:12,692 [salt.state       :1813][INFO    ][6556] Executing state cmd.run for [hostname mdb03]
2018-11-28 16:13:12,692 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'test "$(hostname)" = "mdb03"' in directory '/root'
2018-11-28 16:13:12,711 [salt.state       :300 ][INFO    ][6556] unless execution succeeded
2018-11-28 16:13:12,711 [salt.state       :1951][INFO    ][6556] Completed state [hostname mdb03] at time 16:13:12.711883 duration_in_ms=20.186
2018-11-28 16:13:12,712 [salt.state       :1780][INFO    ][6556] Running state [mdb02] at time 16:13:12.712761
2018-11-28 16:13:12,713 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb02]
2018-11-28 16:13:12,715 [salt.state       :300 ][INFO    ][6556] Host mdb02 (192.168.10.33) already present
2018-11-28 16:13:12,715 [salt.state       :1951][INFO    ][6556] Completed state [mdb02] at time 16:13:12.715322 duration_in_ms=2.561
2018-11-28 16:13:12,715 [salt.state       :1780][INFO    ][6556] Running state [mdb02.mcp-odl-ha.local] at time 16:13:12.715713
2018-11-28 16:13:12,716 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb02.mcp-odl-ha.local]
2018-11-28 16:13:12,716 [salt.state       :300 ][INFO    ][6556] Host mdb02.mcp-odl-ha.local (192.168.10.33) already present
2018-11-28 16:13:12,716 [salt.state       :1951][INFO    ][6556] Completed state [mdb02.mcp-odl-ha.local] at time 16:13:12.716752 duration_in_ms=1.039
2018-11-28 16:13:12,717 [salt.state       :1780][INFO    ][6556] Running state [mdb03] at time 16:13:12.717144
2018-11-28 16:13:12,717 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb03]
2018-11-28 16:13:12,717 [salt.state       :300 ][INFO    ][6556] Host mdb03 (192.168.10.34) already present
2018-11-28 16:13:12,719 [salt.state       :1951][INFO    ][6556] Completed state [mdb03] at time 16:13:12.719042 duration_in_ms=1.898
2018-11-28 16:13:12,719 [salt.state       :1780][INFO    ][6556] Running state [mdb03.mcp-odl-ha.local] at time 16:13:12.719416
2018-11-28 16:13:12,719 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb03.mcp-odl-ha.local]
2018-11-28 16:13:12,720 [salt.state       :300 ][INFO    ][6556] Host mdb03.mcp-odl-ha.local (192.168.10.34) already present
2018-11-28 16:13:12,720 [salt.state       :1951][INFO    ][6556] Completed state [mdb03.mcp-odl-ha.local] at time 16:13:12.720396 duration_in_ms=0.98
2018-11-28 16:13:12,723 [salt.state       :1780][INFO    ][6556] Running state [file.replace] at time 16:13:12.723366
2018-11-28 16:13:12,723 [salt.state       :1813][INFO    ][6556] Executing state module.run for [file.replace]
2018-11-28 16:13:12,733 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'grep -q "mdb03 mdb03.mcp-odl-ha.local" /etc/hosts' in directory '/root'
2018-11-28 16:13:12,752 [salt.utils.decorators:613 ][WARNING ][6556] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-28 16:13:12,758 [salt.state       :300 ][INFO    ][6556] {'ret': '--- \n+++ \n@@ -7,7 +7,7 @@\n ff02::2\t\tip6-allrouters\n ff02::3\t\tip6-allhosts\n 192.168.10.33\t\tmdb02 mdb02.mcp-odl-ha.local\n-192.168.10.34\t\tmdb03 mdb03.mcp-odl-ha.local\n+192.168.10.34\t\tmdb03.mcp-odl-ha.local mdb03\n 192.168.10.32\t\tmdb01 mdb01.mcp-odl-ha.local\n 192.168.10.31\t\tmdb mdb.mcp-odl-ha.local\n 192.168.10.11\t\tcfg01 cfg01.mcp-odl-ha.local\n'}
2018-11-28 16:13:12,759 [salt.state       :1951][INFO    ][6556] Completed state [file.replace] at time 16:13:12.759136 duration_in_ms=35.77
2018-11-28 16:13:12,759 [salt.state       :1780][INFO    ][6556] Running state [mdb01] at time 16:13:12.759880
2018-11-28 16:13:12,760 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb01]
2018-11-28 16:13:12,761 [salt.state       :300 ][INFO    ][6556] Host mdb01 (192.168.10.32) already present
2018-11-28 16:13:12,761 [salt.state       :1951][INFO    ][6556] Completed state [mdb01] at time 16:13:12.761329 duration_in_ms=1.449
2018-11-28 16:13:12,761 [salt.state       :1780][INFO    ][6556] Running state [mdb01.mcp-odl-ha.local] at time 16:13:12.761723
2018-11-28 16:13:12,762 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb01.mcp-odl-ha.local]
2018-11-28 16:13:12,762 [salt.state       :300 ][INFO    ][6556] Host mdb01.mcp-odl-ha.local (192.168.10.32) already present
2018-11-28 16:13:12,763 [salt.state       :1951][INFO    ][6556] Completed state [mdb01.mcp-odl-ha.local] at time 16:13:12.763135 duration_in_ms=1.412
2018-11-28 16:13:12,763 [salt.state       :1780][INFO    ][6556] Running state [mdb] at time 16:13:12.763532
2018-11-28 16:13:12,763 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb]
2018-11-28 16:13:12,764 [salt.state       :300 ][INFO    ][6556] Host mdb (192.168.10.31) already present
2018-11-28 16:13:12,764 [salt.state       :1951][INFO    ][6556] Completed state [mdb] at time 16:13:12.764534 duration_in_ms=1.002
2018-11-28 16:13:12,764 [salt.state       :1780][INFO    ][6556] Running state [mdb.mcp-odl-ha.local] at time 16:13:12.764912
2018-11-28 16:13:12,765 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mdb.mcp-odl-ha.local]
2018-11-28 16:13:12,765 [salt.state       :300 ][INFO    ][6556] Host mdb.mcp-odl-ha.local (192.168.10.31) already present
2018-11-28 16:13:12,765 [salt.state       :1951][INFO    ][6556] Completed state [mdb.mcp-odl-ha.local] at time 16:13:12.765890 duration_in_ms=0.978
2018-11-28 16:13:12,766 [salt.state       :1780][INFO    ][6556] Running state [cfg01] at time 16:13:12.766892
2018-11-28 16:13:12,767 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cfg01]
2018-11-28 16:13:12,767 [salt.state       :300 ][INFO    ][6556] Host cfg01 (192.168.10.11) already present
2018-11-28 16:13:12,767 [salt.state       :1951][INFO    ][6556] Completed state [cfg01] at time 16:13:12.767846 duration_in_ms=0.954
2018-11-28 16:13:12,768 [salt.state       :1780][INFO    ][6556] Running state [cfg01.mcp-odl-ha.local] at time 16:13:12.768213
2018-11-28 16:13:12,768 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-11-28 16:13:12,768 [salt.state       :300 ][INFO    ][6556] Host cfg01.mcp-odl-ha.local (192.168.10.11) already present
2018-11-28 16:13:12,769 [salt.state       :1951][INFO    ][6556] Completed state [cfg01.mcp-odl-ha.local] at time 16:13:12.769165 duration_in_ms=0.952
2018-11-28 16:13:12,769 [salt.state       :1780][INFO    ][6556] Running state [prx01] at time 16:13:12.769530
2018-11-28 16:13:12,769 [salt.state       :1813][INFO    ][6556] Executing state host.present for [prx01]
2018-11-28 16:13:12,770 [salt.state       :300 ][INFO    ][6556] Host prx01 (192.168.10.14) already present
2018-11-28 16:13:12,770 [salt.state       :1951][INFO    ][6556] Completed state [prx01] at time 16:13:12.770537 duration_in_ms=1.007
2018-11-28 16:13:12,770 [salt.state       :1780][INFO    ][6556] Running state [prx01.mcp-odl-ha.local] at time 16:13:12.770917
2018-11-28 16:13:12,771 [salt.state       :1813][INFO    ][6556] Executing state host.present for [prx01.mcp-odl-ha.local]
2018-11-28 16:13:12,771 [salt.state       :300 ][INFO    ][6556] Host prx01.mcp-odl-ha.local (192.168.10.14) already present
2018-11-28 16:13:12,771 [salt.state       :1951][INFO    ][6556] Completed state [prx01.mcp-odl-ha.local] at time 16:13:12.771859 duration_in_ms=0.942
2018-11-28 16:13:12,772 [salt.state       :1780][INFO    ][6556] Running state [kvm01] at time 16:13:12.772218
2018-11-28 16:13:12,772 [salt.state       :1813][INFO    ][6556] Executing state host.present for [kvm01]
2018-11-28 16:13:12,773 [salt.state       :300 ][INFO    ][6556] Host kvm01 (192.168.10.20) already present
2018-11-28 16:13:12,773 [salt.state       :1951][INFO    ][6556] Completed state [kvm01] at time 16:13:12.773198 duration_in_ms=0.98
2018-11-28 16:13:12,773 [salt.state       :1780][INFO    ][6556] Running state [kvm01.mcp-odl-ha.local] at time 16:13:12.773562
2018-11-28 16:13:12,773 [salt.state       :1813][INFO    ][6556] Executing state host.present for [kvm01.mcp-odl-ha.local]
2018-11-28 16:13:12,774 [salt.state       :300 ][INFO    ][6556] Host kvm01.mcp-odl-ha.local (192.168.10.20) already present
2018-11-28 16:13:12,775 [salt.state       :1951][INFO    ][6556] Completed state [kvm01.mcp-odl-ha.local] at time 16:13:12.775125 duration_in_ms=1.563
2018-11-28 16:13:12,775 [salt.state       :1780][INFO    ][6556] Running state [kvm03] at time 16:13:12.775494
2018-11-28 16:13:12,775 [salt.state       :1813][INFO    ][6556] Executing state host.present for [kvm03]
2018-11-28 16:13:12,776 [salt.state       :300 ][INFO    ][6556] Host kvm03 (192.168.10.22) already present
2018-11-28 16:13:12,776 [salt.state       :1951][INFO    ][6556] Completed state [kvm03] at time 16:13:12.776504 duration_in_ms=1.01
2018-11-28 16:13:12,776 [salt.state       :1780][INFO    ][6556] Running state [kvm03.mcp-odl-ha.local] at time 16:13:12.776872
2018-11-28 16:13:12,777 [salt.state       :1813][INFO    ][6556] Executing state host.present for [kvm03.mcp-odl-ha.local]
2018-11-28 16:13:12,777 [salt.state       :300 ][INFO    ][6556] Host kvm03.mcp-odl-ha.local (192.168.10.22) already present
2018-11-28 16:13:12,777 [salt.state       :1951][INFO    ][6556] Completed state [kvm03.mcp-odl-ha.local] at time 16:13:12.777888 duration_in_ms=1.016
2018-11-28 16:13:12,779 [salt.state       :1780][INFO    ][6556] Running state [kvm02] at time 16:13:12.779126
2018-11-28 16:13:12,779 [salt.state       :1813][INFO    ][6556] Executing state host.present for [kvm02]
2018-11-28 16:13:12,779 [salt.state       :300 ][INFO    ][6556] Host kvm02 (192.168.10.21) already present
2018-11-28 16:13:12,780 [salt.state       :1951][INFO    ][6556] Completed state [kvm02] at time 16:13:12.780111 duration_in_ms=0.985
2018-11-28 16:13:12,780 [salt.state       :1780][INFO    ][6556] Running state [kvm02.mcp-odl-ha.local] at time 16:13:12.780483
2018-11-28 16:13:12,780 [salt.state       :1813][INFO    ][6556] Executing state host.present for [kvm02.mcp-odl-ha.local]
2018-11-28 16:13:12,781 [salt.state       :300 ][INFO    ][6556] Host kvm02.mcp-odl-ha.local (192.168.10.21) already present
2018-11-28 16:13:12,781 [salt.state       :1951][INFO    ][6556] Completed state [kvm02.mcp-odl-ha.local] at time 16:13:12.781462 duration_in_ms=0.979
2018-11-28 16:13:12,781 [salt.state       :1780][INFO    ][6556] Running state [dbs] at time 16:13:12.781828
2018-11-28 16:13:12,782 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs]
2018-11-28 16:13:12,783 [salt.state       :300 ][INFO    ][6556] Host dbs (192.168.10.23) already present
2018-11-28 16:13:12,783 [salt.state       :1951][INFO    ][6556] Completed state [dbs] at time 16:13:12.783419 duration_in_ms=1.591
2018-11-28 16:13:12,783 [salt.state       :1780][INFO    ][6556] Running state [dbs.mcp-odl-ha.local] at time 16:13:12.783790
2018-11-28 16:13:12,784 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs.mcp-odl-ha.local]
2018-11-28 16:13:12,784 [salt.state       :300 ][INFO    ][6556] Host dbs.mcp-odl-ha.local (192.168.10.23) already present
2018-11-28 16:13:12,784 [salt.state       :1951][INFO    ][6556] Completed state [dbs.mcp-odl-ha.local] at time 16:13:12.784790 duration_in_ms=1.0
2018-11-28 16:13:12,785 [salt.state       :1780][INFO    ][6556] Running state [prx] at time 16:13:12.785177
2018-11-28 16:13:12,785 [salt.state       :1813][INFO    ][6556] Executing state host.present for [prx]
2018-11-28 16:13:12,785 [salt.state       :300 ][INFO    ][6556] Host prx (192.168.10.13) already present
2018-11-28 16:13:12,786 [salt.state       :1951][INFO    ][6556] Completed state [prx] at time 16:13:12.786196 duration_in_ms=1.02
2018-11-28 16:13:12,786 [salt.state       :1780][INFO    ][6556] Running state [prx.mcp-odl-ha.local] at time 16:13:12.786566
2018-11-28 16:13:12,786 [salt.state       :1813][INFO    ][6556] Executing state host.present for [prx.mcp-odl-ha.local]
2018-11-28 16:13:12,787 [salt.state       :300 ][INFO    ][6556] Host prx.mcp-odl-ha.local (192.168.10.13) already present
2018-11-28 16:13:12,787 [salt.state       :1951][INFO    ][6556] Completed state [prx.mcp-odl-ha.local] at time 16:13:12.787810 duration_in_ms=1.244
2018-11-28 16:13:12,788 [salt.state       :1780][INFO    ][6556] Running state [prx02] at time 16:13:12.788183
2018-11-28 16:13:12,788 [salt.state       :1813][INFO    ][6556] Executing state host.present for [prx02]
2018-11-28 16:13:12,788 [salt.state       :300 ][INFO    ][6556] Host prx02 (192.168.10.15) already present
2018-11-28 16:13:12,789 [salt.state       :1951][INFO    ][6556] Completed state [prx02] at time 16:13:12.789132 duration_in_ms=0.949
2018-11-28 16:13:12,789 [salt.state       :1780][INFO    ][6556] Running state [prx02.mcp-odl-ha.local] at time 16:13:12.789510
2018-11-28 16:13:12,791 [salt.state       :1813][INFO    ][6556] Executing state host.present for [prx02.mcp-odl-ha.local]
2018-11-28 16:13:12,791 [salt.state       :300 ][INFO    ][6556] Host prx02.mcp-odl-ha.local (192.168.10.15) already present
2018-11-28 16:13:12,791 [salt.state       :1951][INFO    ][6556] Completed state [prx02.mcp-odl-ha.local] at time 16:13:12.791887 duration_in_ms=2.377
2018-11-28 16:13:12,792 [salt.state       :1780][INFO    ][6556] Running state [msg02] at time 16:13:12.792267
2018-11-28 16:13:12,792 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg02]
2018-11-28 16:13:12,793 [salt.state       :300 ][INFO    ][6556] Host msg02 (192.168.10.29) already present
2018-11-28 16:13:12,793 [salt.state       :1951][INFO    ][6556] Completed state [msg02] at time 16:13:12.793217 duration_in_ms=0.95
2018-11-28 16:13:12,793 [salt.state       :1780][INFO    ][6556] Running state [msg02.mcp-odl-ha.local] at time 16:13:12.793601
2018-11-28 16:13:12,793 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg02.mcp-odl-ha.local]
2018-11-28 16:13:12,794 [salt.state       :300 ][INFO    ][6556] Host msg02.mcp-odl-ha.local (192.168.10.29) already present
2018-11-28 16:13:12,794 [salt.state       :1951][INFO    ][6556] Completed state [msg02.mcp-odl-ha.local] at time 16:13:12.794920 duration_in_ms=1.32
2018-11-28 16:13:12,795 [salt.state       :1780][INFO    ][6556] Running state [msg03] at time 16:13:12.795291
2018-11-28 16:13:12,795 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg03]
2018-11-28 16:13:12,796 [salt.state       :300 ][INFO    ][6556] Host msg03 (192.168.10.30) already present
2018-11-28 16:13:12,796 [salt.state       :1951][INFO    ][6556] Completed state [msg03] at time 16:13:12.796246 duration_in_ms=0.955
2018-11-28 16:13:12,796 [salt.state       :1780][INFO    ][6556] Running state [msg03.mcp-odl-ha.local] at time 16:13:12.796625
2018-11-28 16:13:12,796 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg03.mcp-odl-ha.local]
2018-11-28 16:13:12,797 [salt.state       :300 ][INFO    ][6556] Host msg03.mcp-odl-ha.local (192.168.10.30) already present
2018-11-28 16:13:12,797 [salt.state       :1951][INFO    ][6556] Completed state [msg03.mcp-odl-ha.local] at time 16:13:12.797574 duration_in_ms=0.949
2018-11-28 16:13:12,797 [salt.state       :1780][INFO    ][6556] Running state [msg01] at time 16:13:12.797954
2018-11-28 16:13:12,798 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg01]
2018-11-28 16:13:12,798 [salt.state       :300 ][INFO    ][6556] Host msg01 (192.168.10.28) already present
2018-11-28 16:13:12,798 [salt.state       :1951][INFO    ][6556] Completed state [msg01] at time 16:13:12.798952 duration_in_ms=0.998
2018-11-28 16:13:12,799 [salt.state       :1780][INFO    ][6556] Running state [msg01.mcp-odl-ha.local] at time 16:13:12.799333
2018-11-28 16:13:12,799 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg01.mcp-odl-ha.local]
2018-11-28 16:13:12,800 [salt.state       :300 ][INFO    ][6556] Host msg01.mcp-odl-ha.local (192.168.10.28) already present
2018-11-28 16:13:12,800 [salt.state       :1951][INFO    ][6556] Completed state [msg01.mcp-odl-ha.local] at time 16:13:12.800269 duration_in_ms=0.936
2018-11-28 16:13:12,800 [salt.state       :1780][INFO    ][6556] Running state [msg] at time 16:13:12.800643
2018-11-28 16:13:12,800 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg]
2018-11-28 16:13:12,801 [salt.state       :300 ][INFO    ][6556] Host msg (192.168.10.27) already present
2018-11-28 16:13:12,801 [salt.state       :1951][INFO    ][6556] Completed state [msg] at time 16:13:12.801595 duration_in_ms=0.952
2018-11-28 16:13:12,802 [salt.state       :1780][INFO    ][6556] Running state [msg.mcp-odl-ha.local] at time 16:13:12.801977
2018-11-28 16:13:12,802 [salt.state       :1813][INFO    ][6556] Executing state host.present for [msg.mcp-odl-ha.local]
2018-11-28 16:13:12,802 [salt.state       :300 ][INFO    ][6556] Host msg.mcp-odl-ha.local (192.168.10.27) already present
2018-11-28 16:13:12,803 [salt.state       :1951][INFO    ][6556] Completed state [msg.mcp-odl-ha.local] at time 16:13:12.802966 duration_in_ms=0.989
2018-11-28 16:13:12,803 [salt.state       :1780][INFO    ][6556] Running state [cfg01] at time 16:13:12.803350
2018-11-28 16:13:12,803 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cfg01]
2018-11-28 16:13:12,804 [salt.state       :300 ][INFO    ][6556] Host cfg01 (192.168.10.11) already present
2018-11-28 16:13:12,804 [salt.state       :1951][INFO    ][6556] Completed state [cfg01] at time 16:13:12.804295 duration_in_ms=0.945
2018-11-28 16:13:12,804 [salt.state       :1780][INFO    ][6556] Running state [cfg01.mcp-odl-ha.local] at time 16:13:12.804671
2018-11-28 16:13:12,804 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cfg01.mcp-odl-ha.local]
2018-11-28 16:13:12,805 [salt.state       :300 ][INFO    ][6556] Host cfg01.mcp-odl-ha.local (192.168.10.11) already present
2018-11-28 16:13:12,805 [salt.state       :1951][INFO    ][6556] Completed state [cfg01.mcp-odl-ha.local] at time 16:13:12.805619 duration_in_ms=0.948
2018-11-28 16:13:12,806 [salt.state       :1780][INFO    ][6556] Running state [cmp002] at time 16:13:12.806037
2018-11-28 16:13:12,806 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cmp002]
2018-11-28 16:13:12,806 [salt.state       :300 ][INFO    ][6556] Host cmp002 (192.168.10.56) already present
2018-11-28 16:13:12,807 [salt.state       :1951][INFO    ][6556] Completed state [cmp002] at time 16:13:12.807016 duration_in_ms=0.979
2018-11-28 16:13:12,807 [salt.state       :1780][INFO    ][6556] Running state [cmp002.mcp-odl-ha.local] at time 16:13:12.807402
2018-11-28 16:13:12,807 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cmp002.mcp-odl-ha.local]
2018-11-28 16:13:12,808 [salt.state       :300 ][INFO    ][6556] Host cmp002.mcp-odl-ha.local (192.168.10.56) already present
2018-11-28 16:13:12,808 [salt.state       :1951][INFO    ][6556] Completed state [cmp002.mcp-odl-ha.local] at time 16:13:12.808373 duration_in_ms=0.971
2018-11-28 16:13:12,808 [salt.state       :1780][INFO    ][6556] Running state [cmp001] at time 16:13:12.808772
2018-11-28 16:13:12,809 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cmp001]
2018-11-28 16:13:12,809 [salt.state       :300 ][INFO    ][6556] Host cmp001 (192.168.10.55) already present
2018-11-28 16:13:12,809 [salt.state       :1951][INFO    ][6556] Completed state [cmp001] at time 16:13:12.809735 duration_in_ms=0.963
2018-11-28 16:13:12,811 [salt.state       :1780][INFO    ][6556] Running state [cmp001.mcp-odl-ha.local] at time 16:13:12.811250
2018-11-28 16:13:12,811 [salt.state       :1813][INFO    ][6556] Executing state host.present for [cmp001.mcp-odl-ha.local]
2018-11-28 16:13:12,812 [salt.state       :300 ][INFO    ][6556] Host cmp001.mcp-odl-ha.local (192.168.10.55) already present
2018-11-28 16:13:12,812 [salt.state       :1951][INFO    ][6556] Completed state [cmp001.mcp-odl-ha.local] at time 16:13:12.812214 duration_in_ms=0.964
2018-11-28 16:13:12,812 [salt.state       :1780][INFO    ][6556] Running state [dbs01] at time 16:13:12.812609
2018-11-28 16:13:12,812 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs01]
2018-11-28 16:13:12,813 [salt.state       :300 ][INFO    ][6556] Host dbs01 (192.168.10.24) already present
2018-11-28 16:13:12,813 [salt.state       :1951][INFO    ][6556] Completed state [dbs01] at time 16:13:12.813614 duration_in_ms=1.005
2018-11-28 16:13:12,814 [salt.state       :1780][INFO    ][6556] Running state [dbs01.mcp-odl-ha.local] at time 16:13:12.813998
2018-11-28 16:13:12,814 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs01.mcp-odl-ha.local]
2018-11-28 16:13:12,815 [salt.state       :300 ][INFO    ][6556] Host dbs01.mcp-odl-ha.local (192.168.10.24) already present
2018-11-28 16:13:12,815 [salt.state       :1951][INFO    ][6556] Completed state [dbs01.mcp-odl-ha.local] at time 16:13:12.815574 duration_in_ms=1.576
2018-11-28 16:13:12,816 [salt.state       :1780][INFO    ][6556] Running state [dbs02] at time 16:13:12.815960
2018-11-28 16:13:12,816 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs02]
2018-11-28 16:13:12,816 [salt.state       :300 ][INFO    ][6556] Host dbs02 (192.168.10.25) already present
2018-11-28 16:13:12,817 [salt.state       :1951][INFO    ][6556] Completed state [dbs02] at time 16:13:12.817135 duration_in_ms=1.175
2018-11-28 16:13:12,817 [salt.state       :1780][INFO    ][6556] Running state [dbs02.mcp-odl-ha.local] at time 16:13:12.817528
2018-11-28 16:13:12,817 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs02.mcp-odl-ha.local]
2018-11-28 16:13:12,818 [salt.state       :300 ][INFO    ][6556] Host dbs02.mcp-odl-ha.local (192.168.10.25) already present
2018-11-28 16:13:12,818 [salt.state       :1951][INFO    ][6556] Completed state [dbs02.mcp-odl-ha.local] at time 16:13:12.818809 duration_in_ms=1.281
2018-11-28 16:13:12,819 [salt.state       :1780][INFO    ][6556] Running state [dbs03] at time 16:13:12.819197
2018-11-28 16:13:12,819 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs03]
2018-11-28 16:13:12,819 [salt.state       :300 ][INFO    ][6556] Host dbs03 (192.168.10.26) already present
2018-11-28 16:13:12,820 [salt.state       :1951][INFO    ][6556] Completed state [dbs03] at time 16:13:12.820145 duration_in_ms=0.948
2018-11-28 16:13:12,820 [salt.state       :1780][INFO    ][6556] Running state [dbs03.mcp-odl-ha.local] at time 16:13:12.820542
2018-11-28 16:13:12,820 [salt.state       :1813][INFO    ][6556] Executing state host.present for [dbs03.mcp-odl-ha.local]
2018-11-28 16:13:12,821 [salt.state       :300 ][INFO    ][6556] Host dbs03.mcp-odl-ha.local (192.168.10.26) already present
2018-11-28 16:13:12,821 [salt.state       :1951][INFO    ][6556] Completed state [dbs03.mcp-odl-ha.local] at time 16:13:12.821481 duration_in_ms=0.939
2018-11-28 16:13:12,821 [salt.state       :1780][INFO    ][6556] Running state [odl02] at time 16:13:12.821869
2018-11-28 16:13:12,822 [salt.state       :1813][INFO    ][6556] Executing state host.present for [odl02]
2018-11-28 16:13:12,823 [salt.state       :300 ][INFO    ][6556] Host odl02 (192.168.10.41) already present
2018-11-28 16:13:12,823 [salt.state       :1951][INFO    ][6556] Completed state [odl02] at time 16:13:12.823681 duration_in_ms=1.811
2018-11-28 16:13:12,824 [salt.state       :1780][INFO    ][6556] Running state [odl02.mcp-odl-ha.local] at time 16:13:12.824078
2018-11-28 16:13:12,824 [salt.state       :1813][INFO    ][6556] Executing state host.present for [odl02.mcp-odl-ha.local]
2018-11-28 16:13:12,824 [salt.state       :300 ][INFO    ][6556] Host odl02.mcp-odl-ha.local (192.168.10.41) already present
2018-11-28 16:13:12,825 [salt.state       :1951][INFO    ][6556] Completed state [odl02.mcp-odl-ha.local] at time 16:13:12.825024 duration_in_ms=0.946
2018-11-28 16:13:12,825 [salt.state       :1780][INFO    ][6556] Running state [odl03] at time 16:13:12.825413
2018-11-28 16:13:12,825 [salt.state       :1813][INFO    ][6556] Executing state host.present for [odl03]
2018-11-28 16:13:12,828 [salt.state       :300 ][INFO    ][6556] Host odl03 (192.168.10.42) already present
2018-11-28 16:13:12,828 [salt.state       :1951][INFO    ][6556] Completed state [odl03] at time 16:13:12.828362 duration_in_ms=2.949
2018-11-28 16:13:12,828 [salt.state       :1780][INFO    ][6556] Running state [odl03.mcp-odl-ha.local] at time 16:13:12.828771
2018-11-28 16:13:12,829 [salt.state       :1813][INFO    ][6556] Executing state host.present for [odl03.mcp-odl-ha.local]
2018-11-28 16:13:12,829 [salt.state       :300 ][INFO    ][6556] Host odl03.mcp-odl-ha.local (192.168.10.42) already present
2018-11-28 16:13:12,829 [salt.state       :1951][INFO    ][6556] Completed state [odl03.mcp-odl-ha.local] at time 16:13:12.829722 duration_in_ms=0.951
2018-11-28 16:13:12,830 [salt.state       :1780][INFO    ][6556] Running state [odl01] at time 16:13:12.830434
2018-11-28 16:13:12,830 [salt.state       :1813][INFO    ][6556] Executing state host.present for [odl01]
2018-11-28 16:13:12,831 [salt.state       :300 ][INFO    ][6556] Host odl01 (192.168.10.40) already present
2018-11-28 16:13:12,831 [salt.state       :1951][INFO    ][6556] Completed state [odl01] at time 16:13:12.831395 duration_in_ms=0.961
2018-11-28 16:13:12,831 [salt.state       :1780][INFO    ][6556] Running state [odl01.mcp-odl-ha.local] at time 16:13:12.831793
2018-11-28 16:13:12,832 [salt.state       :1813][INFO    ][6556] Executing state host.present for [odl01.mcp-odl-ha.local]
2018-11-28 16:13:12,832 [salt.state       :300 ][INFO    ][6556] Host odl01.mcp-odl-ha.local (192.168.10.40) already present
2018-11-28 16:13:12,832 [salt.state       :1951][INFO    ][6556] Completed state [odl01.mcp-odl-ha.local] at time 16:13:12.832737 duration_in_ms=0.944
2018-11-28 16:13:12,833 [salt.state       :1780][INFO    ][6556] Running state [mas01] at time 16:13:12.833141
2018-11-28 16:13:12,833 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mas01]
2018-11-28 16:13:12,833 [salt.state       :300 ][INFO    ][6556] Host mas01 (192.168.10.12) already present
2018-11-28 16:13:12,834 [salt.state       :1951][INFO    ][6556] Completed state [mas01] at time 16:13:12.834674 duration_in_ms=1.534
2018-11-28 16:13:12,835 [salt.state       :1780][INFO    ][6556] Running state [mas01.mcp-odl-ha.local] at time 16:13:12.835078
2018-11-28 16:13:12,835 [salt.state       :1813][INFO    ][6556] Executing state host.present for [mas01.mcp-odl-ha.local]
2018-11-28 16:13:12,835 [salt.state       :300 ][INFO    ][6556] Host mas01.mcp-odl-ha.local (192.168.10.12) already present
2018-11-28 16:13:12,836 [salt.state       :1951][INFO    ][6556] Completed state [mas01.mcp-odl-ha.local] at time 16:13:12.836027 duration_in_ms=0.949
2018-11-28 16:13:12,836 [salt.state       :1780][INFO    ][6556] Running state [ctl02] at time 16:13:12.836429
2018-11-28 16:13:12,836 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl02]
2018-11-28 16:13:12,837 [salt.state       :300 ][INFO    ][6556] Host ctl02 (192.168.10.37) already present
2018-11-28 16:13:12,837 [salt.state       :1951][INFO    ][6556] Completed state [ctl02] at time 16:13:12.837388 duration_in_ms=0.959
2018-11-28 16:13:12,837 [salt.state       :1780][INFO    ][6556] Running state [ctl02.mcp-odl-ha.local] at time 16:13:12.837784
2018-11-28 16:13:12,839 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl02.mcp-odl-ha.local]
2018-11-28 16:13:12,839 [salt.state       :300 ][INFO    ][6556] Host ctl02.mcp-odl-ha.local (192.168.10.37) already present
2018-11-28 16:13:12,840 [salt.state       :1951][INFO    ][6556] Completed state [ctl02.mcp-odl-ha.local] at time 16:13:12.840143 duration_in_ms=2.359
2018-11-28 16:13:12,840 [salt.state       :1780][INFO    ][6556] Running state [ctl03] at time 16:13:12.840551
2018-11-28 16:13:12,840 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl03]
2018-11-28 16:13:12,841 [salt.state       :300 ][INFO    ][6556] Host ctl03 (192.168.10.38) already present
2018-11-28 16:13:12,841 [salt.state       :1951][INFO    ][6556] Completed state [ctl03] at time 16:13:12.841499 duration_in_ms=0.948
2018-11-28 16:13:12,841 [salt.state       :1780][INFO    ][6556] Running state [ctl03.mcp-odl-ha.local] at time 16:13:12.841896
2018-11-28 16:13:12,842 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl03.mcp-odl-ha.local]
2018-11-28 16:13:12,842 [salt.state       :300 ][INFO    ][6556] Host ctl03.mcp-odl-ha.local (192.168.10.38) already present
2018-11-28 16:13:12,843 [salt.state       :1951][INFO    ][6556] Completed state [ctl03.mcp-odl-ha.local] at time 16:13:12.843153 duration_in_ms=1.257
2018-11-28 16:13:12,843 [salt.state       :1780][INFO    ][6556] Running state [ctl01] at time 16:13:12.843554
2018-11-28 16:13:12,843 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl01]
2018-11-28 16:13:12,844 [salt.state       :300 ][INFO    ][6556] Host ctl01 (192.168.10.36) already present
2018-11-28 16:13:12,844 [salt.state       :1951][INFO    ][6556] Completed state [ctl01] at time 16:13:12.844491 duration_in_ms=0.937
2018-11-28 16:13:12,844 [salt.state       :1780][INFO    ][6556] Running state [ctl01.mcp-odl-ha.local] at time 16:13:12.844891
2018-11-28 16:13:12,845 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl01.mcp-odl-ha.local]
2018-11-28 16:13:12,845 [salt.state       :300 ][INFO    ][6556] Host ctl01.mcp-odl-ha.local (192.168.10.36) already present
2018-11-28 16:13:12,845 [salt.state       :1951][INFO    ][6556] Completed state [ctl01.mcp-odl-ha.local] at time 16:13:12.845846 duration_in_ms=0.955
2018-11-28 16:13:12,846 [salt.state       :1780][INFO    ][6556] Running state [ctl] at time 16:13:12.846846
2018-11-28 16:13:12,847 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl]
2018-11-28 16:13:12,851 [salt.state       :300 ][INFO    ][6556] Host ctl (192.168.10.35) already present
2018-11-28 16:13:12,851 [salt.state       :1951][INFO    ][6556] Completed state [ctl] at time 16:13:12.851502 duration_in_ms=4.655
2018-11-28 16:13:12,851 [salt.state       :1780][INFO    ][6556] Running state [ctl.mcp-odl-ha.local] at time 16:13:12.851920
2018-11-28 16:13:12,852 [salt.state       :1813][INFO    ][6556] Executing state host.present for [ctl.mcp-odl-ha.local]
2018-11-28 16:13:12,852 [salt.state       :300 ][INFO    ][6556] Host ctl.mcp-odl-ha.local (192.168.10.35) already present
2018-11-28 16:13:12,852 [salt.state       :1951][INFO    ][6556] Completed state [ctl.mcp-odl-ha.local] at time 16:13:12.852886 duration_in_ms=0.966
2018-11-28 16:13:12,853 [salt.state       :1780][INFO    ][6556] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 16:13:12.853137
2018-11-28 16:13:12,853 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-11-28 16:13:12,853 [salt.state       :300 ][INFO    ][6556] File /etc/network/interfaces.d/50-cloud-init.cfg is not present
2018-11-28 16:13:12,853 [salt.state       :1951][INFO    ][6556] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 16:13:12.853913 duration_in_ms=0.775
2018-11-28 16:13:12,854 [salt.state       :1780][INFO    ][6556] Running state [ens3] at time 16:13:12.854498
2018-11-28 16:13:12,854 [salt.state       :1813][INFO    ][6556] Executing state network.managed for [ens3]
2018-11-28 16:13:13,020 [salt.state       :300 ][INFO    ][6556] Interface ens3 is up to date.
2018-11-28 16:13:13,021 [salt.state       :1951][INFO    ][6556] Completed state [ens3] at time 16:13:13.021182 duration_in_ms=166.683
2018-11-28 16:13:13,021 [salt.state       :1780][INFO    ][6556] Running state [ens2] at time 16:13:13.021649
2018-11-28 16:13:13,022 [salt.state       :1813][INFO    ][6556] Executing state network.managed for [ens2]
2018-11-28 16:13:13,055 [salt.state       :300 ][INFO    ][6556] Interface ens2 is up to date.
2018-11-28 16:13:13,056 [salt.state       :1951][INFO    ][6556] Completed state [ens2] at time 16:13:13.056173 duration_in_ms=34.523
2018-11-28 16:13:13,056 [salt.state       :1780][INFO    ][6556] Running state [linux_system_network] at time 16:13:13.056631
2018-11-28 16:13:13,057 [salt.state       :1813][INFO    ][6556] Executing state network.system for [linux_system_network]
2018-11-28 16:13:13,059 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-11-28 16:13:13,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-11-28 16:13:13,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-11-28 16:13:13,127 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-11-28 16:13:13,608 [salt.loaded.int.module.debian_ip:1964][WARNING ][6556] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-11-28 16:13:13,609 [salt.state       :300 ][INFO    ][6556] {'network_settings': u'--- \n+++ \n@@ -1,3 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb03\n\n DOMAIN=mcp-odl-ha.local\n\n+SEARCH=maas\n'}
2018-11-28 16:13:13,609 [salt.state       :1951][INFO    ][6556] Completed state [linux_system_network] at time 16:13:13.609613 duration_in_ms=552.981
2018-11-28 16:13:13,611 [salt.state       :1780][INFO    ][6556] Running state [/etc/profile.d/proxy.sh] at time 16:13:13.610072
2018-11-28 16:13:13,612 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-11-28 16:13:13,613 [salt.state       :300 ][INFO    ][6556] File /etc/profile.d/proxy.sh is not present
2018-11-28 16:13:13,615 [salt.state       :1951][INFO    ][6556] Completed state [/etc/profile.d/proxy.sh] at time 16:13:13.614983 duration_in_ms=4.911
2018-11-28 16:13:13,615 [salt.state       :1780][INFO    ][6556] Running state [/etc/apt/apt.conf.d/95proxies] at time 16:13:13.615802
2018-11-28 16:13:13,616 [salt.state       :1813][INFO    ][6556] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-11-28 16:13:13,616 [salt.state       :300 ][INFO    ][6556] File /etc/apt/apt.conf.d/95proxies is not present
2018-11-28 16:13:13,617 [salt.state       :1951][INFO    ][6556] Completed state [/etc/apt/apt.conf.d/95proxies] at time 16:13:13.617249 duration_in_ms=1.447
2018-11-28 16:13:13,617 [salt.state       :1780][INFO    ][6556] Running state [/dev/shm] at time 16:13:13.617725
2018-11-28 16:13:13,619 [salt.state       :1813][INFO    ][6556] Executing state mount.mounted for [/dev/shm]
2018-11-28 16:13:13,620 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'mount -l' in directory '/root'
2018-11-28 16:13:13,643 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'blkid' in directory '/root'
2018-11-28 16:13:13,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'mount -l' in directory '/root'
2018-11-28 16:13:13,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'umount /dev/shm' in directory '/root'
2018-11-28 16:13:13,698 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][6556] Command '['umount', '/dev/shm']' failed with return code: 32
2018-11-28 16:13:13,699 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][6556] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2018-11-28 16:13:13,700 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][6556] retcode: 32
2018-11-28 16:13:13,701 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'mount -l' in directory '/root'
2018-11-28 16:13:13,720 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command 'blkid' in directory '/root'
2018-11-28 16:13:13,740 [salt.state       :300 ][INFO    ][6556] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2018-11-28 16:13:13,741 [salt.state       :1951][INFO    ][6556] Completed state [/dev/shm] at time 16:13:13.741322 duration_in_ms=123.596
2018-11-28 16:13:13,742 [salt.state       :1780][INFO    ][6556] Running state [ntp] at time 16:13:13.741990
2018-11-28 16:13:13,742 [salt.state       :1813][INFO    ][6556] Executing state pkg.installed for [ntp]
2018-11-28 16:13:13,754 [salt.state       :300 ][INFO    ][6556] All specified packages are already installed
2018-11-28 16:13:13,754 [salt.state       :1951][INFO    ][6556] Completed state [ntp] at time 16:13:13.754885 duration_in_ms=12.896
2018-11-28 16:13:13,757 [salt.state       :1780][INFO    ][6556] Running state [/etc/ntp.conf] at time 16:13:13.757887
2018-11-28 16:13:13,758 [salt.state       :1813][INFO    ][6556] Executing state file.managed for [/etc/ntp.conf]
2018-11-28 16:13:13,849 [salt.state       :300 ][INFO    ][6556] File /etc/ntp.conf is in the correct state
2018-11-28 16:13:13,850 [salt.state       :1951][INFO    ][6556] Completed state [/etc/ntp.conf] at time 16:13:13.850211 duration_in_ms=92.324
2018-11-28 16:13:13,852 [salt.state       :1780][INFO    ][6556] Running state [ntp] at time 16:13:13.852458
2018-11-28 16:13:13,853 [salt.state       :1813][INFO    ][6556] Executing state service.running for [ntp]
2018-11-28 16:13:13,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-11-28 16:13:13,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-28 16:13:13,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6556] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-11-28 16:13:13,922 [salt.state       :300 ][INFO    ][6556] The service ntp is already running
2018-11-28 16:13:13,923 [salt.state       :1951][INFO    ][6556] Completed state [ntp] at time 16:13:13.923338 duration_in_ms=70.88
2018-11-28 16:13:13,932 [salt.minion      :1711][INFO    ][6556] Returning information for job: 20181128161248460861
2018-11-28 16:13:35,372 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181128161335353377
2018-11-28 16:13:35,401 [salt.minion      :1432][INFO    ][7452] Starting a new job with PID 7452
2018-11-28 16:13:35,420 [salt.minion      :1711][INFO    ][7452] Returning information for job: 20181128161335353377
2018-11-28 16:13:52,698 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command pkg.upgrade with jid 20181128161352678133
2018-11-28 16:13:52,731 [salt.minion      :1432][INFO    ][7464] Starting a new job with PID 7464
2018-11-28 16:13:52,761 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7464] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:13:53,377 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7464] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-11-28 16:13:57,808 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161357782426
2018-11-28 16:13:57,833 [salt.minion      :1432][INFO    ][8238] Starting a new job with PID 8238
2018-11-28 16:13:57,865 [salt.minion      :1711][INFO    ][8238] Returning information for job: 20181128161357782426
2018-11-28 16:14:07,837 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161407817097
2018-11-28 16:14:07,864 [salt.minion      :1432][INFO    ][11396] Starting a new job with PID 11396
2018-11-28 16:14:07,893 [salt.minion      :1711][INFO    ][11396] Returning information for job: 20181128161407817097
2018-11-28 16:14:17,857 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161417837287
2018-11-28 16:14:17,892 [salt.minion      :1432][INFO    ][13464] Starting a new job with PID 13464
2018-11-28 16:14:17,919 [salt.minion      :1711][INFO    ][13464] Returning information for job: 20181128161417837287
2018-11-28 16:14:27,892 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128161427872130
2018-11-28 16:14:27,927 [salt.minion      :1432][INFO    ][19309] Starting a new job with PID 19309
2018-11-28 16:14:27,949 [salt.minion      :1711][INFO    ][19309] Returning information for job: 20181128161427872130
2018-11-28 16:14:36,112 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7464] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:14:36,162 [salt.minion      :1711][INFO    ][7464] Returning information for job: 20181128161352678133
2018-11-28 16:23:48,101 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command test.ping with jid 20181128162348084441
2018-11-28 16:23:48,123 [salt.minion      :1432][INFO    ][19383] Starting a new job with PID 19383
2018-11-28 16:23:48,159 [salt.minion      :1711][INFO    ][19383] Returning information for job: 20181128162348084441
2018-11-28 16:24:45,102 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128162445081512
2018-11-28 16:24:45,117 [salt.minion      :1432][INFO    ][19408] Starting a new job with PID 19408
2018-11-28 16:24:50,142 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128162450112256
2018-11-28 16:24:50,165 [salt.minion      :1432][INFO    ][19413] Starting a new job with PID 19413
2018-11-28 16:24:50,183 [salt.minion      :1711][INFO    ][19413] Returning information for job: 20181128162450112256
2018-11-28 16:24:53,025 [salt.state       :915 ][INFO    ][19408] Loading fresh modules for state activity
2018-11-28 16:24:53,080 [salt.fileclient  :1219][INFO    ][19408] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-11-28 16:24:53,108 [salt.fileclient  :1219][INFO    ][19408] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-11-28 16:24:53,904 [salt.state       :1780][INFO    ][19408] Running state [keepalived] at time 16:24:53.904315
2018-11-28 16:24:53,904 [salt.state       :1813][INFO    ][19408] Executing state pkg.installed for [keepalived]
2018-11-28 16:24:53,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:24:54,382 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-11-28 16:24:54,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 16:24:56,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:24:56,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-11-28 16:25:00,223 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128162500205203
2018-11-28 16:25:00,242 [salt.minion      :1432][INFO    ][20690] Starting a new job with PID 20690
2018-11-28 16:25:00,259 [salt.minion      :1711][INFO    ][20690] Returning information for job: 20181128162500205203
2018-11-28 16:25:01,136 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:25:01,182 [salt.state       :300 ][INFO    ][19408] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-11-28 16:25:01,208 [salt.state       :915 ][INFO    ][19408] Loading fresh modules for state activity
2018-11-28 16:25:01,254 [salt.state       :1951][INFO    ][19408] Completed state [keepalived] at time 16:25:01.254552 duration_in_ms=7350.237
2018-11-28 16:25:01,261 [salt.state       :1780][INFO    ][19408] Running state [lsof] at time 16:25:01.261337
2018-11-28 16:25:01,261 [salt.state       :1813][INFO    ][19408] Executing state pkg.installed for [lsof]
2018-11-28 16:25:02,082 [salt.state       :300 ][INFO    ][19408] All specified packages are already installed
2018-11-28 16:25:02,083 [salt.state       :1951][INFO    ][19408] Completed state [lsof] at time 16:25:02.083692 duration_in_ms=822.354
2018-11-28 16:25:02,087 [salt.state       :1780][INFO    ][19408] Running state [/etc/keepalived/keepalived.conf] at time 16:25:02.087464
2018-11-28 16:25:02,088 [salt.state       :1813][INFO    ][19408] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-11-28 16:25:02,113 [salt.fileclient  :1219][INFO    ][19408] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-11-28 16:25:02,169 [salt.state       :300 ][INFO    ][19408] File changed:
New file
2018-11-28 16:25:02,169 [salt.state       :1951][INFO    ][19408] Completed state [/etc/keepalived/keepalived.conf] at time 16:25:02.169736 duration_in_ms=82.272
2018-11-28 16:25:02,171 [salt.state       :1780][INFO    ][19408] Running state [keepalived] at time 16:25:02.171041
2018-11-28 16:25:02,171 [salt.state       :1813][INFO    ][19408] Executing state service.running for [keepalived]
2018-11-28 16:25:02,172 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-11-28 16:25:02,192 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-11-28 16:25:02,210 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-28 16:25:02,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-11-28 16:25:02,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-11-28 16:25:02,319 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-28 16:25:02,339 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19408] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-28 16:25:02,356 [salt.state       :300 ][INFO    ][19408] {'keepalived': True}
2018-11-28 16:25:02,357 [salt.state       :1951][INFO    ][19408] Completed state [keepalived] at time 16:25:02.357353 duration_in_ms=186.312
2018-11-28 16:25:02,359 [salt.minion      :1711][INFO    ][19408] Returning information for job: 20181128162445081512
2018-11-28 16:28:27,252 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command pillar.get with jid 20181128162827234344
2018-11-28 16:28:27,281 [salt.minion      :1432][INFO    ][20801] Starting a new job with PID 20801
2018-11-28 16:28:27,291 [salt.minion      :1711][INFO    ][20801] Returning information for job: 20181128162827234344
2018-11-28 16:40:23,790 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128164023773421
2018-11-28 16:40:23,814 [salt.minion      :1432][INFO    ][20836] Starting a new job with PID 20836
2018-11-28 16:40:29,982 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128164029964351
2018-11-28 16:40:30,012 [salt.minion      :1432][INFO    ][20841] Starting a new job with PID 20841
2018-11-28 16:40:30,032 [salt.minion      :1711][INFO    ][20841] Returning information for job: 20181128164029964351
2018-11-28 16:40:34,075 [salt.state       :915 ][INFO    ][20836] Loading fresh modules for state activity
2018-11-28 16:40:35,358 [salt.fileclient  :1219][INFO    ][20836] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-11-28 16:40:35,387 [salt.fileclient  :1219][INFO    ][20836] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-11-28 16:40:35,415 [salt.fileclient  :1219][INFO    ][20836] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-11-28 16:40:36,175 [salt.state       :1780][INFO    ][20836] Running state [memcached] at time 16:40:36.175636
2018-11-28 16:40:36,176 [salt.state       :1813][INFO    ][20836] Executing state pkg.installed for [memcached]
2018-11-28 16:40:36,177 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:40:36,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-11-28 16:40:36,830 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 16:40:38,872 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:40:38,902 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-11-28 16:40:40,116 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128164040096099
2018-11-28 16:40:40,138 [salt.minion      :1432][INFO    ][21363] Starting a new job with PID 21363
2018-11-28 16:40:40,156 [salt.minion      :1711][INFO    ][21363] Returning information for job: 20181128164040096099
2018-11-28 16:40:42,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:40:42,674 [salt.state       :300 ][INFO    ][20836] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-11-28 16:40:42,692 [salt.state       :915 ][INFO    ][20836] Loading fresh modules for state activity
2018-11-28 16:40:42,734 [salt.state       :1951][INFO    ][20836] Completed state [memcached] at time 16:40:42.734495 duration_in_ms=6558.86
2018-11-28 16:40:42,740 [salt.state       :1780][INFO    ][20836] Running state [python-memcache] at time 16:40:42.740779
2018-11-28 16:40:42,741 [salt.state       :1813][INFO    ][20836] Executing state pkg.installed for [python-memcache]
2018-11-28 16:40:43,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:40:43,546 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-11-28 16:40:45,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:40:45,712 [salt.state       :300 ][INFO    ][20836] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-11-28 16:40:45,733 [salt.state       :915 ][INFO    ][20836] Loading fresh modules for state activity
2018-11-28 16:40:45,776 [salt.state       :1951][INFO    ][20836] Completed state [python-memcache] at time 16:40:45.776869 duration_in_ms=3036.089
2018-11-28 16:40:45,782 [salt.state       :1780][INFO    ][20836] Running state [/etc/memcached.conf] at time 16:40:45.782664
2018-11-28 16:40:45,783 [salt.state       :1813][INFO    ][20836] Executing state file.managed for [/etc/memcached.conf]
2018-11-28 16:40:45,816 [salt.fileclient  :1219][INFO    ][20836] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-11-28 16:40:45,855 [salt.state       :300 ][INFO    ][20836] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-11-28 16:40:45,865 [salt.state       :1951][INFO    ][20836] Completed state [/etc/memcached.conf] at time 16:40:45.865567 duration_in_ms=82.903
2018-11-28 16:40:46,447 [salt.state       :1780][INFO    ][20836] Running state [memcached] at time 16:40:46.446987
2018-11-28 16:40:46,447 [salt.state       :1813][INFO    ][20836] Executing state service.running for [memcached]
2018-11-28 16:40:46,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-11-28 16:40:46,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-11-28 16:40:46,487 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-11-28 16:40:46,505 [salt.state       :300 ][INFO    ][20836] The service memcached is already running
2018-11-28 16:40:46,506 [salt.state       :1951][INFO    ][20836] Completed state [memcached] at time 16:40:46.506382 duration_in_ms=59.397
2018-11-28 16:40:46,506 [salt.state       :1780][INFO    ][20836] Running state [memcached] at time 16:40:46.506710
2018-11-28 16:40:46,507 [salt.state       :1813][INFO    ][20836] Executing state service.mod_watch for [memcached]
2018-11-28 16:40:46,508 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-11-28 16:40:46,523 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20836] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-11-28 16:40:46,551 [salt.state       :300 ][INFO    ][20836] {'memcached': True}
2018-11-28 16:40:46,551 [salt.state       :1951][INFO    ][20836] Completed state [memcached] at time 16:40:46.551786 duration_in_ms=45.076
2018-11-28 16:40:46,554 [salt.minion      :1711][INFO    ][20836] Returning information for job: 20181128164023773421
2018-11-28 16:40:47,807 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128164047791136
2018-11-28 16:40:47,827 [salt.minion      :1432][INFO    ][21844] Starting a new job with PID 21844
2018-11-28 16:40:53,301 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128164053283092
2018-11-28 16:40:53,324 [salt.minion      :1432][INFO    ][21849] Starting a new job with PID 21849
2018-11-28 16:40:53,345 [salt.minion      :1711][INFO    ][21849] Returning information for job: 20181128164053283092
2018-11-28 16:40:57,075 [salt.state       :915 ][INFO    ][21844] Loading fresh modules for state activity
2018-11-28 16:40:58,833 [salt.fileclient  :1219][INFO    ][21844] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-11-28 16:40:58,871 [salt.fileclient  :1219][INFO    ][21844] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-11-28 16:40:59,740 [salt.state       :1780][INFO    ][21844] Running state [haproxy] at time 16:40:59.740794
2018-11-28 16:40:59,742 [salt.state       :1813][INFO    ][21844] Executing state pkg.installed for [haproxy]
2018-11-28 16:40:59,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:41:00,241 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-11-28 16:41:00,377 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 16:41:02,422 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:41:02,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-11-28 16:41:03,401 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128164103384121
2018-11-28 16:41:03,427 [salt.minion      :1432][INFO    ][22246] Starting a new job with PID 22246
2018-11-28 16:41:03,452 [salt.minion      :1711][INFO    ][22246] Returning information for job: 20181128164103384121
2018-11-28 16:41:06,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:41:06,589 [salt.state       :300 ][INFO    ][21844] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-11-28 16:41:06,613 [salt.state       :915 ][INFO    ][21844] Loading fresh modules for state activity
2018-11-28 16:41:06,656 [salt.state       :1951][INFO    ][21844] Completed state [haproxy] at time 16:41:06.656149 duration_in_ms=6915.356
2018-11-28 16:41:06,663 [salt.state       :1780][INFO    ][21844] Running state [/etc/default/haproxy] at time 16:41:06.663014
2018-11-28 16:41:06,663 [salt.state       :1813][INFO    ][21844] Executing state file.managed for [/etc/default/haproxy]
2018-11-28 16:41:06,698 [salt.fileclient  :1219][INFO    ][21844] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-11-28 16:41:06,702 [salt.state       :300 ][INFO    ][21844] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-11-28 16:41:06,706 [salt.state       :1951][INFO    ][21844] Completed state [/etc/default/haproxy] at time 16:41:06.706308 duration_in_ms=43.293
2018-11-28 16:41:06,707 [salt.state       :1780][INFO    ][21844] Running state [/etc/haproxy/haproxy.cfg] at time 16:41:06.706956
2018-11-28 16:41:06,707 [salt.state       :1813][INFO    ][21844] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-11-28 16:41:06,722 [salt.fileclient  :1219][INFO    ][21844] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-11-28 16:41:06,912 [salt.state       :300 ][INFO    ][21844] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-11-28 16:41:06,920 [salt.state       :1951][INFO    ][21844] Completed state [/etc/haproxy/haproxy.cfg] at time 16:41:06.919993 duration_in_ms=213.037
2018-11-28 16:41:06,920 [salt.state       :1780][INFO    ][21844] Running state [/etc/haproxy/ssl] at time 16:41:06.920383
2018-11-28 16:41:06,920 [salt.state       :1813][INFO    ][21844] Executing state file.directory for [/etc/haproxy/ssl]
2018-11-28 16:41:06,928 [salt.state       :300 ][INFO    ][21844] {'/etc/haproxy/ssl': 'New Dir'}
2018-11-28 16:41:06,928 [salt.state       :1951][INFO    ][21844] Completed state [/etc/haproxy/ssl] at time 16:41:06.928915 duration_in_ms=8.532
2018-11-28 16:41:06,929 [salt.state       :1780][INFO    ][21844] Running state [/etc/haproxy/errors/429.http11] at time 16:41:06.929263
2018-11-28 16:41:06,929 [salt.state       :1813][INFO    ][21844] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-11-28 16:41:06,953 [salt.fileclient  :1219][INFO    ][21844] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-11-28 16:41:06,962 [salt.state       :300 ][INFO    ][21844] File changed:
New file
2018-11-28 16:41:06,963 [salt.state       :1951][INFO    ][21844] Completed state [/etc/haproxy/errors/429.http11] at time 16:41:06.963258 duration_in_ms=33.994
2018-11-28 16:41:06,964 [salt.state       :1780][INFO    ][21844] Running state [haproxy_status_packages] at time 16:41:06.964615
2018-11-28 16:41:06,965 [salt.state       :1813][INFO    ][21844] Executing state pkg.installed for [haproxy_status_packages]
2018-11-28 16:41:07,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 16:41:07,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-11-28 16:41:10,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 16:41:10,051 [salt.state       :300 ][INFO    ][21844] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-11-28 16:41:10,073 [salt.state       :915 ][INFO    ][21844] Loading fresh modules for state activity
2018-11-28 16:41:10,118 [salt.state       :1951][INFO    ][21844] Completed state [haproxy_status_packages] at time 16:41:10.118541 duration_in_ms=3153.925
2018-11-28 16:41:10,123 [salt.state       :1780][INFO    ][21844] Running state [/usr/bin/haproxy-status.sh] at time 16:41:10.123133
2018-11-28 16:41:10,123 [salt.state       :1813][INFO    ][21844] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-11-28 16:41:10,149 [salt.fileclient  :1219][INFO    ][21844] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-11-28 16:41:10,182 [salt.state       :300 ][INFO    ][21844] File changed:
New file
2018-11-28 16:41:10,183 [salt.state       :1951][INFO    ][21844] Completed state [/usr/bin/haproxy-status.sh] at time 16:41:10.183550 duration_in_ms=60.416
2018-11-28 16:41:10,186 [salt.state       :1780][INFO    ][21844] Running state [net.ipv4.ip_nonlocal_bind] at time 16:41:10.186611
2018-11-28 16:41:10,187 [salt.state       :1813][INFO    ][21844] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-11-28 16:41:10,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-11-28 16:41:10,206 [salt.state       :300 ][INFO    ][21844] {'net.ipv4.ip_nonlocal_bind': 1}
2018-11-28 16:41:10,206 [salt.state       :1951][INFO    ][21844] Completed state [net.ipv4.ip_nonlocal_bind] at time 16:41:10.206798 duration_in_ms=20.187
2018-11-28 16:41:10,747 [salt.state       :1780][INFO    ][21844] Running state [haproxy] at time 16:41:10.747181
2018-11-28 16:41:10,748 [salt.state       :1813][INFO    ][21844] Executing state service.running for [haproxy]
2018-11-28 16:41:10,749 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-11-28 16:41:10,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-28 16:41:10,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-11-28 16:41:10,808 [salt.state       :300 ][INFO    ][21844] The service haproxy is already running
2018-11-28 16:41:10,808 [salt.state       :1951][INFO    ][21844] Completed state [haproxy] at time 16:41:10.808616 duration_in_ms=61.434
2018-11-28 16:41:10,808 [salt.state       :1780][INFO    ][21844] Running state [haproxy] at time 16:41:10.808952
2018-11-28 16:41:10,810 [salt.state       :1813][INFO    ][21844] Executing state service.mod_watch for [haproxy]
2018-11-28 16:41:10,811 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-28 16:41:10,831 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21844] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-11-28 16:41:10,870 [salt.state       :300 ][INFO    ][21844] {'haproxy': True}
2018-11-28 16:41:10,875 [salt.state       :1951][INFO    ][21844] Completed state [haproxy] at time 16:41:10.875473 duration_in_ms=66.52
2018-11-28 16:41:10,878 [salt.minion      :1711][INFO    ][21844] Returning information for job: 20181128164047791136
2018-11-28 16:41:13,243 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command service.status with jid 20181128164113223629
2018-11-28 16:41:13,266 [salt.minion      :1432][INFO    ][23045] Starting a new job with PID 23045
2018-11-28 16:41:13,820 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][23045] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-11-28 16:41:13,842 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][23045] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-28 16:41:13,861 [salt.minion      :1711][INFO    ][23045] Returning information for job: 20181128164113223629
2018-11-28 16:41:15,200 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command service.restart with jid 20181128164115181725
2018-11-28 16:41:15,227 [salt.minion      :1432][INFO    ][23055] Starting a new job with PID 23055
2018-11-28 16:41:15,771 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][23055] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-11-28 16:41:15,807 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][23055] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-11-28 16:41:15,843 [salt.minion      :1711][INFO    ][23055] Returning information for job: 20181128164115181725
2018-11-28 17:07:51,647 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128170751630550
2018-11-28 17:07:51,669 [salt.minion      :1432][INFO    ][23162] Starting a new job with PID 23162
2018-11-28 17:07:56,744 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128170756725656
2018-11-28 17:07:56,767 [salt.minion      :1432][INFO    ][23167] Starting a new job with PID 23167
2018-11-28 17:07:56,790 [salt.minion      :1711][INFO    ][23167] Returning information for job: 20181128170756725656
2018-11-28 17:07:59,312 [salt.state       :915 ][INFO    ][23162] Loading fresh modules for state activity
2018-11-28 17:07:59,714 [salt.fileclient  :1219][INFO    ][23162] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-11-28 17:07:59,751 [salt.fileclient  :1219][INFO    ][23162] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-11-28 17:07:59,774 [salt.fileclient  :1219][INFO    ][23162] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-11-28 17:07:59,817 [salt.fileclient  :1219][INFO    ][23162] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-11-28 17:08:00,691 [salt.state       :1780][INFO    ][23162] Running state [redis-server] at time 17:08:00.691219
2018-11-28 17:08:00,692 [salt.state       :1813][INFO    ][23162] Executing state pkg.installed for [redis-server]
2018-11-28 17:08:00,693 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:08:01,187 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-11-28 17:08:01,322 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 17:08:05,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:08:05,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-11-28 17:08:06,807 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128170806784963
2018-11-28 17:08:06,825 [salt.minion      :1432][INFO    ][23578] Starting a new job with PID 23578
2018-11-28 17:08:06,849 [salt.minion      :1711][INFO    ][23578] Returning information for job: 20181128170806784963
2018-11-28 17:08:09,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:08:09,888 [salt.state       :300 ][INFO    ][23162] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-11-28 17:08:09,912 [salt.state       :915 ][INFO    ][23162] Loading fresh modules for state activity
2018-11-28 17:08:09,957 [salt.state       :1951][INFO    ][23162] Completed state [redis-server] at time 17:08:09.957696 duration_in_ms=9266.477
2018-11-28 17:08:09,962 [salt.state       :1780][INFO    ][23162] Running state [vm.overcommit_memory] at time 17:08:09.962793
2018-11-28 17:08:09,963 [salt.state       :1813][INFO    ][23162] Executing state sysctl.present for [vm.overcommit_memory]
2018-11-28 17:08:09,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-11-28 17:08:09,986 [salt.state       :300 ][INFO    ][23162] {'vm.overcommit_memory': 1}
2018-11-28 17:08:09,987 [salt.state       :1951][INFO    ][23162] Completed state [vm.overcommit_memory] at time 17:08:09.987167 duration_in_ms=24.373
2018-11-28 17:08:09,991 [salt.state       :1780][INFO    ][23162] Running state [/etc/redis/redis.conf] at time 17:08:09.991555
2018-11-28 17:08:09,991 [salt.state       :1813][INFO    ][23162] Executing state file.managed for [/etc/redis/redis.conf]
2018-11-28 17:08:10,035 [salt.fileclient  :1219][INFO    ][23162] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-11-28 17:08:10,106 [salt.state       :300 ][INFO    ][23162] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.34
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -208,6 +208,7 @@
 #    and resynchronize with them.
 #
 # slaveof <masterip> <masterport>
+slaveof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the slave to authenticate before
@@ -505,7 +506,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -535,9 +535,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-11-28 17:08:10,106 [salt.state       :1951][INFO    ][23162] Completed state [/etc/redis/redis.conf] at time 17:08:10.106389 duration_in_ms=114.833
2018-11-28 17:08:10,641 [salt.state       :1780][INFO    ][23162] Running state [redis-server] at time 17:08:10.641502
2018-11-28 17:08:10,642 [salt.state       :1813][INFO    ][23162] Executing state service.running for [redis-server]
2018-11-28 17:08:10,642 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-11-28 17:08:10,664 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-11-28 17:08:10,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-11-28 17:08:10,707 [salt.state       :300 ][INFO    ][23162] The service redis-server is already running
2018-11-28 17:08:10,707 [salt.state       :1951][INFO    ][23162] Completed state [redis-server] at time 17:08:10.707876 duration_in_ms=66.374
2018-11-28 17:08:10,708 [salt.state       :1780][INFO    ][23162] Running state [redis-server] at time 17:08:10.708887
2018-11-28 17:08:10,710 [salt.state       :1813][INFO    ][23162] Executing state service.mod_watch for [redis-server]
2018-11-28 17:08:10,711 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-11-28 17:08:10,734 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-11-28 17:08:11,009 [salt.state       :300 ][INFO    ][23162] {'redis-server': True}
2018-11-28 17:08:11,010 [salt.state       :1951][INFO    ][23162] Completed state [redis-server] at time 17:08:11.010151 duration_in_ms=301.265
2018-11-28 17:08:11,014 [salt.state       :1780][INFO    ][23162] Running state [redis-sentinel] at time 17:08:11.014480
2018-11-28 17:08:11,014 [salt.state       :1813][INFO    ][23162] Executing state pkg.installed for [redis-sentinel]
2018-11-28 17:08:11,282 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:08:11,308 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-11-28 17:08:14,637 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:08:14,682 [salt.state       :300 ][INFO    ][23162] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-11-28 17:08:14,704 [salt.state       :915 ][INFO    ][23162] Loading fresh modules for state activity
2018-11-28 17:08:14,754 [salt.state       :1951][INFO    ][23162] Completed state [redis-sentinel] at time 17:08:14.754563 duration_in_ms=3740.082
2018-11-28 17:08:15,363 [salt.state       :1780][INFO    ][23162] Running state [/etc/redis/sentinel.conf] at time 17:08:15.363299
2018-11-28 17:08:15,363 [salt.state       :1813][INFO    ][23162] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-11-28 17:08:15,394 [salt.fileclient  :1219][INFO    ][23162] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-11-28 17:08:15,443 [salt.state       :300 ][INFO    ][23162] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.34
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-11-28 17:08:15,446 [salt.state       :1951][INFO    ][23162] Completed state [/etc/redis/sentinel.conf] at time 17:08:15.446479 duration_in_ms=83.183
2018-11-28 17:08:15,446 [salt.state       :1780][INFO    ][23162] Running state [redis-sentinel] at time 17:08:15.446919
2018-11-28 17:08:15,447 [salt.state       :1813][INFO    ][23162] Executing state service.running for [redis-sentinel]
2018-11-28 17:08:15,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-11-28 17:08:15,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-11-28 17:08:15,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-11-28 17:08:15,505 [salt.state       :300 ][INFO    ][23162] The service redis-sentinel is already running
2018-11-28 17:08:15,506 [salt.state       :1951][INFO    ][23162] Completed state [redis-sentinel] at time 17:08:15.506650 duration_in_ms=59.73
2018-11-28 17:08:15,507 [salt.state       :1780][INFO    ][23162] Running state [redis-sentinel] at time 17:08:15.507494
2018-11-28 17:08:15,508 [salt.state       :1813][INFO    ][23162] Executing state service.mod_watch for [redis-sentinel]
2018-11-28 17:08:15,510 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-11-28 17:08:15,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][23162] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-11-28 17:08:15,807 [salt.state       :300 ][INFO    ][23162] {'redis-sentinel': True}
2018-11-28 17:08:15,808 [salt.state       :1951][INFO    ][23162] Completed state [redis-sentinel] at time 17:08:15.808000 duration_in_ms=300.504
2018-11-28 17:08:15,811 [salt.minion      :1711][INFO    ][23162] Returning information for job: 20181128170751630550
2018-11-28 17:08:16,406 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command test.ping with jid 20181128170816390796
2018-11-28 17:08:16,420 [salt.minion      :1432][INFO    ][24488] Starting a new job with PID 24488
2018-11-28 17:08:16,443 [salt.minion      :1711][INFO    ][24488] Returning information for job: 20181128170816390796
2018-11-28 17:10:45,799 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128171045784512
2018-11-28 17:10:45,822 [salt.minion      :1432][INFO    ][24493] Starting a new job with PID 24493
2018-11-28 17:10:47,726 [salt.utils.schedule:1377][INFO    ][3044] Running scheduled job: __mine_interval
2018-11-28 17:10:50,812 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171050795515
2018-11-28 17:10:50,833 [salt.minion      :1432][INFO    ][24507] Starting a new job with PID 24507
2018-11-28 17:10:50,853 [salt.minion      :1711][INFO    ][24507] Returning information for job: 20181128171050795515
2018-11-28 17:10:53,605 [salt.state       :915 ][INFO    ][24493] Loading fresh modules for state activity
2018-11-28 17:10:53,662 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-11-28 17:10:53,695 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-11-28 17:10:53,767 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-11-28 17:10:53,798 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-11-28 17:10:53,825 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-11-28 17:10:53,905 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-11-28 17:10:53,988 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-11-28 17:10:54,118 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-11-28 17:10:54,253 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-11-28 17:10:54,325 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-11-28 17:10:54,409 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-11-28 17:10:54,462 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-11-28 17:10:55,280 [salt.state       :1780][INFO    ][24493] Running state [apache2] at time 17:10:55.280261
2018-11-28 17:10:55,280 [salt.state       :1813][INFO    ][24493] Executing state pkg.installed for [apache2]
2018-11-28 17:10:55,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:10:55,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-11-28 17:10:55,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 17:10:57,949 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:10:57,981 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-11-28 17:11:00,889 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171100872223
2018-11-28 17:11:00,910 [salt.minion      :1432][INFO    ][25527] Starting a new job with PID 25527
2018-11-28 17:11:00,937 [salt.minion      :1711][INFO    ][25527] Returning information for job: 20181128171100872223
2018-11-28 17:11:05,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:11:05,659 [salt.state       :300 ][INFO    ][24493] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-11-28 17:11:05,686 [salt.state       :915 ][INFO    ][24493] Loading fresh modules for state activity
2018-11-28 17:11:05,778 [salt.state       :1951][INFO    ][24493] Completed state [apache2] at time 17:11:05.778247 duration_in_ms=10497.988
2018-11-28 17:11:05,785 [salt.state       :1780][INFO    ][24493] Running state [openssl] at time 17:11:05.785133
2018-11-28 17:11:05,785 [salt.state       :1813][INFO    ][24493] Executing state pkg.installed for [openssl]
2018-11-28 17:11:06,550 [salt.state       :300 ][INFO    ][24493] All specified packages are already installed
2018-11-28 17:11:06,551 [salt.state       :1951][INFO    ][24493] Completed state [openssl] at time 17:11:06.551296 duration_in_ms=766.161
2018-11-28 17:11:06,553 [salt.state       :1780][INFO    ][24493] Running state [a2enmod rewrite] at time 17:11:06.553140
2018-11-28 17:11:06,553 [salt.state       :1813][INFO    ][24493] Executing state cmd.run for [a2enmod rewrite]
2018-11-28 17:11:06,554 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command 'a2enmod rewrite' in directory '/root'
2018-11-28 17:11:06,622 [salt.state       :300 ][INFO    ][24493] {'pid': 26044, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-11-28 17:11:06,623 [salt.state       :1951][INFO    ][24493] Completed state [a2enmod rewrite] at time 17:11:06.623282 duration_in_ms=70.141
2018-11-28 17:11:06,624 [salt.state       :1780][INFO    ][24493] Running state [libapache2-mod-wsgi] at time 17:11:06.624752
2018-11-28 17:11:06,625 [salt.state       :1813][INFO    ][24493] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-28 17:11:06,657 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:11:06,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-11-28 17:11:11,022 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171111004897
2018-11-28 17:11:11,041 [salt.minion      :1432][INFO    ][26339] Starting a new job with PID 26339
2018-11-28 17:11:11,104 [salt.minion      :1711][INFO    ][26339] Returning information for job: 20181128171111004897
2018-11-28 17:11:11,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:11:11,645 [salt.state       :300 ][INFO    ][24493] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.4'

2018-11-28 17:11:11,670 [salt.state       :915 ][INFO    ][24493] Loading fresh modules for state activity
2018-11-28 17:11:11,718 [salt.state       :1951][INFO    ][24493] Completed state [libapache2-mod-wsgi] at time 17:11:11.718549 duration_in_ms=5093.797
2018-11-28 17:11:11,723 [salt.state       :1780][INFO    ][24493] Running state [a2enmod wsgi] at time 17:11:11.723039
2018-11-28 17:11:11,723 [salt.state       :1813][INFO    ][24493] Executing state cmd.run for [a2enmod wsgi]
2018-11-28 17:11:11,724 [salt.state       :300 ][INFO    ][24493] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-28 17:11:11,724 [salt.state       :1951][INFO    ][24493] Completed state [a2enmod wsgi] at time 17:11:11.724768 duration_in_ms=1.729
2018-11-28 17:11:11,729 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:11:11.729544
2018-11-28 17:11:11,730 [salt.state       :1813][INFO    ][24493] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-28 17:11:11,762 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-11-28 17:11:11,824 [salt.state       :300 ][INFO    ][24493] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-11-28 17:11:11,828 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:11:11.828323 duration_in_ms=98.779
2018-11-28 17:11:11,828 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:11:11.828869
2018-11-28 17:11:11,829 [salt.state       :1813][INFO    ][24493] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-28 17:11:11,830 [salt.state       :300 ][INFO    ][24493] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-28 17:11:11,830 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:11:11.830496 duration_in_ms=1.627
2018-11-28 17:11:11,831 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:11:11.830981
2018-11-28 17:11:11,831 [salt.state       :1813][INFO    ][24493] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-28 17:11:11,832 [salt.state       :300 ][INFO    ][24493] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-11-28 17:11:11,832 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:11:11.832522 duration_in_ms=1.541
2018-11-28 17:11:11,833 [salt.state       :1780][INFO    ][24493] Running state [a2enmod mpm_prefork] at time 17:11:11.833563
2018-11-28 17:11:11,834 [salt.state       :1813][INFO    ][24493] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-28 17:11:11,837 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-11-28 17:11:11,896 [salt.state       :300 ][INFO    ][24493] {'pid': 26376, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-11-28 17:11:11,899 [salt.state       :1951][INFO    ][24493] Completed state [a2enmod mpm_prefork] at time 17:11:11.899276 duration_in_ms=65.713
2018-11-28 17:11:11,900 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:11:11.900159
2018-11-28 17:11:11,900 [salt.state       :1813][INFO    ][24493] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-28 17:11:11,901 [salt.state       :300 ][INFO    ][24493] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-28 17:11:11,902 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:11:11.902066 duration_in_ms=1.907
2018-11-28 17:11:11,902 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:11:11.902621
2018-11-28 17:11:11,903 [salt.state       :1813][INFO    ][24493] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-28 17:11:11,903 [salt.state       :300 ][INFO    ][24493] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-11-28 17:11:11,904 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:11:11.904215 duration_in_ms=1.594
2018-11-28 17:11:11,906 [salt.state       :1780][INFO    ][24493] Running state [apache_server_service_task] at time 17:11:11.906669
2018-11-28 17:11:11,907 [salt.state       :1813][INFO    ][24493] Executing state test.show_notification for [apache_server_service_task]
2018-11-28 17:11:11,907 [salt.state       :300 ][INFO    ][24493] Running apache.server.service
2018-11-28 17:11:11,908 [salt.state       :1951][INFO    ][24493] Completed state [apache_server_service_task] at time 17:11:11.908157 duration_in_ms=1.488
2018-11-28 17:11:11,909 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/ports.conf] at time 17:11:11.909106
2018-11-28 17:11:11,909 [salt.state       :1813][INFO    ][24493] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-28 17:11:11,925 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-11-28 17:11:11,987 [salt.state       :300 ][INFO    ][24493] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-11-28 17:11:11,990 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/ports.conf] at time 17:11:11.990763 duration_in_ms=81.657
2018-11-28 17:11:11,991 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/conf-available/security.conf] at time 17:11:11.991491
2018-11-28 17:11:11,992 [salt.state       :1813][INFO    ][24493] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-28 17:11:12,006 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-11-28 17:11:12,063 [salt.state       :300 ][INFO    ][24493] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-11-28 17:11:12,070 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/conf-available/security.conf] at time 17:11:12.070709 duration_in_ms=79.218
2018-11-28 17:11:12,641 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 17:11:12.641251
2018-11-28 17:11:12,642 [salt.state       :1813][INFO    ][24493] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-28 17:11:12,643 [salt.state       :300 ][INFO    ][24493] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-11-28 17:11:12,643 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 17:11:12.643523 duration_in_ms=2.273
2018-11-28 17:11:12,644 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:11:12.644330
2018-11-28 17:11:12,644 [salt.state       :1813][INFO    ][24493] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-28 17:11:12,664 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-11-28 17:11:12,698 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-11-28 17:11:12,768 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-11-28 17:11:12,791 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-11-28 17:11:12,882 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-11-28 17:11:12,904 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-11-28 17:11:12,927 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-11-28 17:11:12,942 [salt.state       :300 ][INFO    ][24493] File changed:
New file
2018-11-28 17:11:12,943 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:11:12.943308 duration_in_ms=298.978
2018-11-28 17:11:12,944 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:11:12.944275
2018-11-28 17:11:12,945 [salt.state       :1813][INFO    ][24493] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-28 17:11:13,170 [salt.state       :300 ][INFO    ][24493] File changed:
New file
2018-11-28 17:11:13,171 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:11:13.171587 duration_in_ms=227.311
2018-11-28 17:11:13,174 [salt.state       :1780][INFO    ][24493] Running state [apache2] at time 17:11:13.174397
2018-11-28 17:11:13,174 [salt.state       :1813][INFO    ][24493] Executing state service.running for [apache2]
2018-11-28 17:11:13,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-28 17:11:13,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:11:13,214 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:11:13,235 [salt.state       :300 ][INFO    ][24493] The service apache2 is already running
2018-11-28 17:11:13,235 [salt.state       :1951][INFO    ][24493] Completed state [apache2] at time 17:11:13.235707 duration_in_ms=61.309
2018-11-28 17:11:13,236 [salt.state       :1780][INFO    ][24493] Running state [apache2] at time 17:11:13.236060
2018-11-28 17:11:13,236 [salt.state       :1813][INFO    ][24493] Executing state service.mod_watch for [apache2]
2018-11-28 17:11:13,238 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:11:13,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-11-28 17:11:13,436 [salt.state       :300 ][INFO    ][24493] {'apache2': True}
2018-11-28 17:11:13,437 [salt.state       :1951][INFO    ][24493] Completed state [apache2] at time 17:11:13.437141 duration_in_ms=201.08
2018-11-28 17:11:13,438 [salt.state       :1780][INFO    ][24493] Running state [/etc/apache2/conf-enabled/security.conf] at time 17:11:13.438435
2018-11-28 17:11:13,438 [salt.state       :1813][INFO    ][24493] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-28 17:11:13,445 [salt.state       :300 ][INFO    ][24493] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-11-28 17:11:13,445 [salt.state       :1951][INFO    ][24493] Completed state [/etc/apache2/conf-enabled/security.conf] at time 17:11:13.445250 duration_in_ms=6.815
2018-11-28 17:11:13,447 [salt.state       :1780][INFO    ][24493] Running state [gnocchi-common] at time 17:11:13.447424
2018-11-28 17:11:13,447 [salt.state       :1813][INFO    ][24493] Executing state pkg.installed for [gnocchi-common]
2018-11-28 17:11:13,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:11:13,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-11-28 17:11:21,198 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171121181068
2018-11-28 17:11:21,215 [salt.minion      :1432][INFO    ][27400] Starting a new job with PID 27400
2018-11-28 17:11:21,236 [salt.minion      :1711][INFO    ][27400] Returning information for job: 20181128171121181068
2018-11-28 17:11:31,352 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171131330890
2018-11-28 17:11:31,367 [salt.minion      :1432][INFO    ][28797] Starting a new job with PID 28797
2018-11-28 17:11:31,389 [salt.minion      :1711][INFO    ][28797] Returning information for job: 20181128171131330890
2018-11-28 17:11:41,493 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171141476262
2018-11-28 17:11:41,514 [salt.minion      :1432][INFO    ][29389] Starting a new job with PID 29389
2018-11-28 17:11:41,533 [salt.minion      :1711][INFO    ][29389] Returning information for job: 20181128171141476262
2018-11-28 17:11:45,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:11:45,102 [salt.state       :300 ][INFO    ][24493] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.1-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp6'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.2.0+dfsg1-2~u16.04+mcp'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-4~u16.04+mcp8'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-2~u16.04+mcp17'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-2~u16.04+mcp'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp12'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp5'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-4~u16.04+mcp8'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-11-28 17:11:45,129 [salt.state       :915 ][INFO    ][24493] Loading fresh modules for state activity
2018-11-28 17:11:45,171 [salt.state       :1951][INFO    ][24493] Completed state [gnocchi-common] at time 17:11:45.171668 duration_in_ms=31724.243
2018-11-28 17:11:45,174 [salt.state       :1780][INFO    ][24493] Running state [gnocchi_ssl_mysql] at time 17:11:45.174764
2018-11-28 17:11:45,175 [salt.state       :1813][INFO    ][24493] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-11-28 17:11:45,175 [salt.state       :300 ][INFO    ][24493] Running gnocchi._ssl.mysql
2018-11-28 17:11:45,175 [salt.state       :1951][INFO    ][24493] Completed state [gnocchi_ssl_mysql] at time 17:11:45.175600 duration_in_ms=0.836
2018-11-28 17:11:45,178 [salt.state       :1780][INFO    ][24493] Running state [/etc/gnocchi/gnocchi.conf] at time 17:11:45.178199
2018-11-28 17:11:45,178 [salt.state       :1813][INFO    ][24493] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-11-28 17:11:45,202 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-11-28 17:11:45,297 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-11-28 17:11:45,314 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-11-28 17:11:45,350 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-11-28 17:11:45,390 [salt.fileclient  :1219][INFO    ][24493] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-11-28 17:11:45,398 [salt.state       :300 ][INFO    ][24493] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `sentinel`,
-# `socket_keepalive`, `retry_on_timeout`, `ssl_certfile`, `db`,
-# `sentinel_fallback`, `encoding`, `ssl_keyfile`, `ssl`, `socket_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `sentinel`,
-# `socket_keepalive`, `retry_on_timeout`, `ssl_certfile`, `db`,
-# `sentinel_fallback`, `encoding`, `ssl_keyfile`, `ssl`, `socket_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.34:6379

2018-11-28 17:11:45,399 [salt.state       :1951][INFO    ][24493] Completed state [/etc/gnocchi/gnocchi.conf] at time 17:11:45.399193 duration_in_ms=220.994
2018-11-28 17:11:45,403 [salt.state       :1780][INFO    ][24493] Running state [gnocchi-api] at time 17:11:45.403673
2018-11-28 17:11:45,403 [salt.state       :1813][INFO    ][24493] Executing state pkg.installed for [gnocchi-api]
2018-11-28 17:11:46,930 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:11:46,959 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-11-28 17:11:51,646 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171151624344
2018-11-28 17:11:51,664 [salt.minion      :1432][INFO    ][30379] Starting a new job with PID 30379
2018-11-28 17:11:51,690 [salt.minion      :1711][INFO    ][30379] Returning information for job: 20181128171151624344
2018-11-28 17:11:55,112 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:11:55,171 [salt.state       :300 ][INFO    ][24493] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp22'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-4~u16.04+mcp8'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-11-28 17:11:55,204 [salt.state       :915 ][INFO    ][24493] Loading fresh modules for state activity
2018-11-28 17:11:55,250 [salt.state       :1951][INFO    ][24493] Completed state [gnocchi-api] at time 17:11:55.250563 duration_in_ms=9846.887
2018-11-28 17:11:55,258 [salt.state       :1780][INFO    ][24493] Running state [gnocchi-metricd] at time 17:11:55.258248
2018-11-28 17:11:55,258 [salt.state       :1813][INFO    ][24493] Executing state pkg.installed for [gnocchi-metricd]
2018-11-28 17:11:56,441 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:11:56,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-11-28 17:11:59,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:11:59,479 [salt.state       :300 ][INFO    ][24493] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-4~u16.04+mcp8'

2018-11-28 17:11:59,511 [salt.state       :915 ][INFO    ][24493] Loading fresh modules for state activity
2018-11-28 17:11:59,723 [salt.state       :1951][INFO    ][24493] Completed state [gnocchi-metricd] at time 17:11:59.723413 duration_in_ms=4465.165
2018-11-28 17:11:59,730 [salt.state       :1780][INFO    ][24493] Running state [python-memcache] at time 17:11:59.730900
2018-11-28 17:11:59,731 [salt.state       :1813][INFO    ][24493] Executing state pkg.installed for [python-memcache]
2018-11-28 17:12:00,635 [salt.state       :300 ][INFO    ][24493] All specified packages are already installed
2018-11-28 17:12:00,636 [salt.state       :1951][INFO    ][24493] Completed state [python-memcache] at time 17:12:00.636115 duration_in_ms=905.214
2018-11-28 17:12:00,638 [salt.state       :1780][INFO    ][24493] Running state [gnocchi-upgrade] at time 17:12:00.638063
2018-11-28 17:12:00,638 [salt.state       :1813][INFO    ][24493] Executing state cmd.run for [gnocchi-upgrade]
2018-11-28 17:12:00,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-11-28 17:12:01,807 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171201787427
2018-11-28 17:12:01,826 [salt.minion      :1432][INFO    ][30789] Starting a new job with PID 30789
2018-11-28 17:12:01,846 [salt.minion      :1711][INFO    ][30789] Returning information for job: 20181128171201787427
2018-11-28 17:12:02,644 [salt.state       :300 ][INFO    ][24493] {'pid': 30773, 'retcode': 0, 'stderr': '2018-11-28 17:12:02,076 [30779] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-11-28 17:12:02,452 [30779] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://***:***@192.168.10.23/gnocchi?charset=utf8\n2018-11-28 17:12:02,577 [30779] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.34,port=6379,db=0>>>\n2018-11-28 17:12:02,578 [30779] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-11-28 17:12:02,647 [salt.state       :1951][INFO    ][24493] Completed state [gnocchi-upgrade] at time 17:12:02.647295 duration_in_ms=2009.23
2018-11-28 17:12:02,650 [salt.state       :1780][INFO    ][24493] Running state [wsgi_gnocchi] at time 17:12:02.650751
2018-11-28 17:12:02,651 [salt.state       :1813][INFO    ][24493] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-11-28 17:12:02,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-11-28 17:12:02,712 [salt.state       :300 ][INFO    ][24493] {'new': 'wsgi_gnocchi', 'old': None}
2018-11-28 17:12:02,713 [salt.state       :1951][INFO    ][24493] Completed state [wsgi_gnocchi] at time 17:12:02.713410 duration_in_ms=62.659
2018-11-28 17:12:02,717 [salt.state       :1780][INFO    ][24493] Running state [apache2] at time 17:12:02.717089
2018-11-28 17:12:02,717 [salt.state       :1813][INFO    ][24493] Executing state service.running for [apache2]
2018-11-28 17:12:02,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:12:02,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:12:02,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-11-28 17:12:03,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:12:03,994 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:12:04,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:12:04,052 [salt.state       :300 ][INFO    ][24493] {'apache2': True}
2018-11-28 17:12:04,052 [salt.state       :1951][INFO    ][24493] Completed state [apache2] at time 17:12:04.052888 duration_in_ms=1335.798
2018-11-28 17:12:04,054 [salt.state       :1780][INFO    ][24493] Running state [gnocchi-metricd] at time 17:12:04.054725
2018-11-28 17:12:04,055 [salt.state       :1813][INFO    ][24493] Executing state service.running for [gnocchi-metricd]
2018-11-28 17:12:04,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-11-28 17:12:04,090 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:04,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:04,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:04,181 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:04,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:04,256 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:04,294 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:05,100 [salt.loaded.int.module.cmdmod:395 ][INFO    ][24493] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-28 17:12:05,119 [salt.state       :300 ][INFO    ][24493] {'gnocchi-metricd': True}
2018-11-28 17:12:05,120 [salt.state       :1951][INFO    ][24493] Completed state [gnocchi-metricd] at time 17:12:05.120286 duration_in_ms=1065.561
2018-11-28 17:12:05,124 [salt.minion      :1711][INFO    ][24493] Returning information for job: 20181128171045784512
2018-11-28 17:12:05,782 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command test.ping with jid 20181128171205765885
2018-11-28 17:12:05,806 [salt.minion      :1432][INFO    ][31046] Starting a new job with PID 31046
2018-11-28 17:12:05,873 [salt.minion      :1711][INFO    ][31046] Returning information for job: 20181128171205765885
2018-11-28 17:12:48,190 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128171248174435
2018-11-28 17:12:48,216 [salt.minion      :1432][INFO    ][31086] Starting a new job with PID 31086
2018-11-28 17:12:49,212 [salt.state       :915 ][INFO    ][31086] Loading fresh modules for state activity
2018-11-28 17:12:49,269 [salt.fileclient  :1219][INFO    ][31086] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-11-28 17:12:49,299 [salt.fileclient  :1219][INFO    ][31086] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-11-28 17:12:49,957 [salt.fileclient  :1219][INFO    ][31086] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-11-28 17:12:50,008 [salt.fileclient  :1219][INFO    ][31086] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2018-11-28 17:12:51,840 [salt.state       :1780][INFO    ][31086] Running state [apache2] at time 17:12:51.840445
2018-11-28 17:12:51,840 [salt.state       :1813][INFO    ][31086] Executing state pkg.installed for [apache2]
2018-11-28 17:12:51,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:12:52,279 [salt.state       :300 ][INFO    ][31086] All specified packages are already installed
2018-11-28 17:12:52,280 [salt.state       :1951][INFO    ][31086] Completed state [apache2] at time 17:12:52.280059 duration_in_ms=439.615
2018-11-28 17:12:52,280 [salt.state       :1780][INFO    ][31086] Running state [openssl] at time 17:12:52.280478
2018-11-28 17:12:52,281 [salt.state       :1813][INFO    ][31086] Executing state pkg.installed for [openssl]
2018-11-28 17:12:52,290 [salt.state       :300 ][INFO    ][31086] All specified packages are already installed
2018-11-28 17:12:52,290 [salt.state       :1951][INFO    ][31086] Completed state [openssl] at time 17:12:52.290582 duration_in_ms=10.104
2018-11-28 17:12:52,291 [salt.state       :1780][INFO    ][31086] Running state [a2enmod rewrite] at time 17:12:52.291231
2018-11-28 17:12:52,291 [salt.state       :1813][INFO    ][31086] Executing state cmd.run for [a2enmod rewrite]
2018-11-28 17:12:52,291 [salt.state       :300 ][INFO    ][31086] /etc/apache2/mods-enabled/rewrite.load exists
2018-11-28 17:12:52,292 [salt.state       :1951][INFO    ][31086] Completed state [a2enmod rewrite] at time 17:12:52.292115 duration_in_ms=0.884
2018-11-28 17:12:52,292 [salt.state       :1780][INFO    ][31086] Running state [libapache2-mod-wsgi] at time 17:12:52.292609
2018-11-28 17:12:52,292 [salt.state       :1813][INFO    ][31086] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-28 17:12:52,301 [salt.state       :300 ][INFO    ][31086] All specified packages are already installed
2018-11-28 17:12:52,302 [salt.state       :1951][INFO    ][31086] Completed state [libapache2-mod-wsgi] at time 17:12:52.302069 duration_in_ms=9.46
2018-11-28 17:12:52,302 [salt.state       :1780][INFO    ][31086] Running state [a2enmod wsgi] at time 17:12:52.302536
2018-11-28 17:12:52,302 [salt.state       :1813][INFO    ][31086] Executing state cmd.run for [a2enmod wsgi]
2018-11-28 17:12:52,303 [salt.state       :300 ][INFO    ][31086] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-28 17:12:52,303 [salt.state       :1951][INFO    ][31086] Completed state [a2enmod wsgi] at time 17:12:52.303344 duration_in_ms=0.808
2018-11-28 17:12:52,309 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:12:52.309884
2018-11-28 17:12:52,310 [salt.state       :1813][INFO    ][31086] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-28 17:12:52,566 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-11-28 17:12:52,566 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:12:52.566653 duration_in_ms=256.769
2018-11-28 17:12:52,566 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:12:52.566932
2018-11-28 17:12:52,567 [salt.state       :1813][INFO    ][31086] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-28 17:12:52,567 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-28 17:12:52,567 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:12:52.567762 duration_in_ms=0.83
2018-11-28 17:12:52,568 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:12:52.567997
2018-11-28 17:12:52,568 [salt.state       :1813][INFO    ][31086] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-28 17:12:52,568 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-11-28 17:12:52,568 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:12:52.568740 duration_in_ms=0.743
2018-11-28 17:12:52,569 [salt.state       :1780][INFO    ][31086] Running state [a2enmod mpm_prefork] at time 17:12:52.569467
2018-11-28 17:12:52,569 [salt.state       :1813][INFO    ][31086] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-28 17:12:52,570 [salt.state       :300 ][INFO    ][31086] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-11-28 17:12:52,570 [salt.state       :1951][INFO    ][31086] Completed state [a2enmod mpm_prefork] at time 17:12:52.570381 duration_in_ms=0.914
2018-11-28 17:12:52,570 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:12:52.570620
2018-11-28 17:12:52,570 [salt.state       :1813][INFO    ][31086] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-28 17:12:52,571 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-28 17:12:52,571 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:12:52.571340 duration_in_ms=0.72
2018-11-28 17:12:52,571 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:12:52.571566
2018-11-28 17:12:52,571 [salt.state       :1813][INFO    ][31086] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-28 17:12:52,572 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-11-28 17:12:52,572 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:12:52.572275 duration_in_ms=0.709
2018-11-28 17:12:52,573 [salt.state       :1780][INFO    ][31086] Running state [apache_server_service_task] at time 17:12:52.573177
2018-11-28 17:12:52,573 [salt.state       :1813][INFO    ][31086] Executing state test.show_notification for [apache_server_service_task]
2018-11-28 17:12:52,573 [salt.state       :300 ][INFO    ][31086] Running apache.server.service
2018-11-28 17:12:52,573 [salt.state       :1951][INFO    ][31086] Completed state [apache_server_service_task] at time 17:12:52.573916 duration_in_ms=0.739
2018-11-28 17:12:52,574 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/ports.conf] at time 17:12:52.574405
2018-11-28 17:12:52,574 [salt.state       :1813][INFO    ][31086] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-28 17:12:52,646 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/ports.conf is in the correct state
2018-11-28 17:12:52,646 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/ports.conf] at time 17:12:52.646653 duration_in_ms=72.248
2018-11-28 17:12:52,647 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/conf-available/security.conf] at time 17:12:52.647101
2018-11-28 17:12:52,647 [salt.state       :1813][INFO    ][31086] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-28 17:12:52,714 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/conf-available/security.conf is in the correct state
2018-11-28 17:12:52,714 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/conf-available/security.conf] at time 17:12:52.714444 duration_in_ms=67.342
2018-11-28 17:12:52,721 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 17:12:52.721089
2018-11-28 17:12:52,721 [salt.state       :1813][INFO    ][31086] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-28 17:12:52,721 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-11-28 17:12:52,721 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 17:12:52.721871 duration_in_ms=0.782
2018-11-28 17:12:52,722 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:12:52.722353
2018-11-28 17:12:52,722 [salt.state       :1813][INFO    ][31086] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-28 17:12:52,974 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-11-28 17:12:52,974 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:12:52.974405 duration_in_ms=252.051
2018-11-28 17:12:52,974 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:12:52.974948
2018-11-28 17:12:52,975 [salt.state       :1813][INFO    ][31086] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-28 17:12:53,202 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171253184900
2018-11-28 17:12:53,218 [salt.state       :300 ][INFO    ][31086] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-11-28 17:12:53,218 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:12:53.218655 duration_in_ms=243.707
2018-11-28 17:12:53,220 [salt.state       :1780][INFO    ][31086] Running state [apache2] at time 17:12:53.220924
2018-11-28 17:12:53,221 [salt.state       :1813][INFO    ][31086] Executing state service.running for [apache2]
2018-11-28 17:12:53,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-28 17:12:53,224 [salt.minion      :1432][INFO    ][31138] Starting a new job with PID 31138
2018-11-28 17:12:53,247 [salt.minion      :1711][INFO    ][31138] Returning information for job: 20181128171253184900
2018-11-28 17:12:53,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:12:53,283 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:12:53,304 [salt.state       :300 ][INFO    ][31086] The service apache2 is already running
2018-11-28 17:12:53,304 [salt.state       :1951][INFO    ][31086] Completed state [apache2] at time 17:12:53.304620 duration_in_ms=83.696
2018-11-28 17:12:53,305 [salt.state       :1780][INFO    ][31086] Running state [/etc/apache2/conf-enabled/security.conf] at time 17:12:53.305729
2018-11-28 17:12:53,306 [salt.state       :1813][INFO    ][31086] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-28 17:12:53,308 [salt.state       :300 ][INFO    ][31086] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-11-28 17:12:53,309 [salt.state       :1951][INFO    ][31086] Completed state [/etc/apache2/conf-enabled/security.conf] at time 17:12:53.308991 duration_in_ms=3.262
2018-11-28 17:12:53,309 [salt.state       :1780][INFO    ][31086] Running state [panko-api] at time 17:12:53.309914
2018-11-28 17:12:53,310 [salt.state       :1813][INFO    ][31086] Executing state pkg.installed for [panko-api]
2018-11-28 17:12:53,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-11-28 17:12:53,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 17:12:55,607 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:12:55,647 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-11-28 17:12:58,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:12:58,905 [salt.state       :300 ][INFO    ][31086] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp7'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp7'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp7'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-11-28 17:12:58,944 [salt.state       :915 ][INFO    ][31086] Loading fresh modules for state activity
2018-11-28 17:12:58,990 [salt.state       :1951][INFO    ][31086] Completed state [panko-api] at time 17:12:58.990535 duration_in_ms=5680.62
2018-11-28 17:12:58,993 [salt.state       :1780][INFO    ][31086] Running state [panko_ssl_mysql] at time 17:12:58.993738
2018-11-28 17:12:58,994 [salt.state       :1813][INFO    ][31086] Executing state test.show_notification for [panko_ssl_mysql]
2018-11-28 17:12:58,994 [salt.state       :300 ][INFO    ][31086] Running panko._ssl.mysql
2018-11-28 17:12:58,994 [salt.state       :1951][INFO    ][31086] Completed state [panko_ssl_mysql] at time 17:12:58.994652 duration_in_ms=0.914
2018-11-28 17:12:58,998 [salt.state       :1780][INFO    ][31086] Running state [/etc/panko/panko.conf] at time 17:12:58.998235
2018-11-28 17:12:58,998 [salt.state       :1813][INFO    ][31086] Executing state file.managed for [/etc/panko/panko.conf]
2018-11-28 17:12:59,030 [salt.fileclient  :1219][INFO    ][31086] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-11-28 17:12:59,091 [salt.fileclient  :1219][INFO    ][31086] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-11-28 17:12:59,118 [salt.fileclient  :1219][INFO    ][31086] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-11-28 17:12:59,212 [salt.state       :300 ][INFO    ][31086] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -362,36 +377,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -466,110 +451,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-11-28 17:12:59,213 [salt.state       :1951][INFO    ][31086] Completed state [/etc/panko/panko.conf] at time 17:12:59.213655 duration_in_ms=215.42
2018-11-28 17:12:59,214 [salt.state       :1780][INFO    ][31086] Running state [panko-dbsync] at time 17:12:59.214284
2018-11-28 17:12:59,214 [salt.state       :1813][INFO    ][31086] Executing state cmd.run for [panko-dbsync]
2018-11-28 17:12:59,217 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command '/bin/false' in directory '/root'
2018-11-28 17:12:59,244 [salt.state       :300 ][INFO    ][31086] onlyif execution failed
2018-11-28 17:12:59,244 [salt.state       :1951][INFO    ][31086] Completed state [panko-dbsync] at time 17:12:59.244852 duration_in_ms=30.567
2018-11-28 17:12:59,256 [salt.state       :1780][INFO    ][31086] Running state [wsgi_panko] at time 17:12:59.256036
2018-11-28 17:12:59,256 [salt.state       :1813][INFO    ][31086] Executing state apache_site.enabled for [wsgi_panko]
2018-11-28 17:12:59,257 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-11-28 17:12:59,361 [salt.state       :300 ][INFO    ][31086] {'new': 'wsgi_panko', 'old': None}
2018-11-28 17:12:59,362 [salt.state       :1951][INFO    ][31086] Completed state [wsgi_panko] at time 17:12:59.362059 duration_in_ms=106.023
2018-11-28 17:12:59,950 [salt.state       :1780][INFO    ][31086] Running state [apache2] at time 17:12:59.950157
2018-11-28 17:12:59,950 [salt.state       :1813][INFO    ][31086] Executing state service.running for [apache2]
2018-11-28 17:12:59,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:12:59,970 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:12:59,989 [salt.state       :300 ][INFO    ][31086] The service apache2 is already running
2018-11-28 17:12:59,990 [salt.state       :1951][INFO    ][31086] Completed state [apache2] at time 17:12:59.990403 duration_in_ms=40.247
2018-11-28 17:12:59,991 [salt.state       :1780][INFO    ][31086] Running state [apache2] at time 17:12:59.990958
2018-11-28 17:12:59,991 [salt.state       :1813][INFO    ][31086] Executing state service.mod_watch for [apache2]
2018-11-28 17:12:59,992 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:13:00,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31086] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-11-28 17:13:02,324 [salt.state       :300 ][INFO    ][31086] {'apache2': True}
2018-11-28 17:13:02,325 [salt.state       :1951][INFO    ][31086] Completed state [apache2] at time 17:13:02.325134 duration_in_ms=2334.175
2018-11-28 17:13:02,329 [salt.minion      :1711][INFO    ][31086] Returning information for job: 20181128171248174435
2018-11-28 17:13:02,942 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command test.ping with jid 20181128171302927035
2018-11-28 17:13:02,965 [salt.minion      :1432][INFO    ][31880] Starting a new job with PID 31880
2018-11-28 17:13:03,007 [salt.minion      :1711][INFO    ][31880] Returning information for job: 20181128171302927035
2018-11-28 17:15:39,498 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128171539483959
2018-11-28 17:15:39,519 [salt.minion      :1432][INFO    ][31890] Starting a new job with PID 31890
2018-11-28 17:15:44,515 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171544496298
2018-11-28 17:15:44,537 [salt.minion      :1432][INFO    ][31895] Starting a new job with PID 31895
2018-11-28 17:15:44,559 [salt.minion      :1711][INFO    ][31895] Returning information for job: 20181128171544496298
2018-11-28 17:15:47,146 [salt.state       :915 ][INFO    ][31890] Loading fresh modules for state activity
2018-11-28 17:15:47,203 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-11-28 17:15:47,234 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-11-28 17:15:47,403 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2018-11-28 17:15:47,454 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-11-28 17:15:47,528 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-11-28 17:15:49,930 [salt.state       :1780][INFO    ][31890] Running state [aodh-api] at time 17:15:49.930512
2018-11-28 17:15:49,931 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [aodh-api]
2018-11-28 17:15:49,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:15:50,403 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-11-28 17:15:50,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 17:15:52,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:15:52,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-11-28 17:15:54,653 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171554630217
2018-11-28 17:15:54,671 [salt.minion      :1432][INFO    ][32341] Starting a new job with PID 32341
2018-11-28 17:15:54,690 [salt.minion      :1711][INFO    ][32341] Returning information for job: 20181128171554630217
2018-11-28 17:16:04,791 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171604772415
2018-11-28 17:16:04,811 [salt.minion      :1432][INFO    ][5013] Starting a new job with PID 5013
2018-11-28 17:16:04,839 [salt.minion      :1711][INFO    ][5013] Returning information for job: 20181128171604772415
2018-11-28 17:16:06,258 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:16:06,318 [salt.state       :300 ][INFO    ][31890] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-139.165'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-11-28 17:16:06,353 [salt.state       :915 ][INFO    ][31890] Loading fresh modules for state activity
2018-11-28 17:16:06,570 [salt.state       :1951][INFO    ][31890] Completed state [aodh-api] at time 17:16:06.570553 duration_in_ms=16640.041
2018-11-28 17:16:06,576 [salt.state       :1780][INFO    ][31890] Running state [aodh-evaluator] at time 17:16:06.576856
2018-11-28 17:16:06,577 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [aodh-evaluator]
2018-11-28 17:16:07,477 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:16:07,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-11-28 17:16:10,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:16:10,951 [salt.state       :300 ][INFO    ][31890] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-28 17:16:10,986 [salt.state       :915 ][INFO    ][31890] Loading fresh modules for state activity
2018-11-28 17:16:11,038 [salt.state       :1951][INFO    ][31890] Completed state [aodh-evaluator] at time 17:16:11.038471 duration_in_ms=4461.615
2018-11-28 17:16:11,044 [salt.state       :1780][INFO    ][31890] Running state [aodh-notifier] at time 17:16:11.044619
2018-11-28 17:16:11,052 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [aodh-notifier]
2018-11-28 17:16:12,018 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:16:12,047 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-11-28 17:16:14,935 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171614920262
2018-11-28 17:16:14,964 [salt.minion      :1432][INFO    ][5672] Starting a new job with PID 5672
2018-11-28 17:16:15,007 [salt.minion      :1711][INFO    ][5672] Returning information for job: 20181128171614920262
2018-11-28 17:16:15,421 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:16:15,473 [salt.state       :300 ][INFO    ][31890] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-28 17:16:15,505 [salt.state       :915 ][INFO    ][31890] Loading fresh modules for state activity
2018-11-28 17:16:15,562 [salt.state       :1951][INFO    ][31890] Completed state [aodh-notifier] at time 17:16:15.562475 duration_in_ms=4517.855
2018-11-28 17:16:15,569 [salt.state       :1780][INFO    ][31890] Running state [aodh-listener] at time 17:16:15.569405
2018-11-28 17:16:15,578 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [aodh-listener]
2018-11-28 17:16:16,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:16:16,587 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-11-28 17:16:20,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:16:20,147 [salt.state       :300 ][INFO    ][31890] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-28 17:16:20,179 [salt.state       :915 ][INFO    ][31890] Loading fresh modules for state activity
2018-11-28 17:16:20,223 [salt.state       :1951][INFO    ][31890] Completed state [aodh-listener] at time 17:16:20.223446 duration_in_ms=4654.04
2018-11-28 17:16:20,229 [salt.state       :1780][INFO    ][31890] Running state [python-aodhclient] at time 17:16:20.229918
2018-11-28 17:16:20,230 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [python-aodhclient]
2018-11-28 17:16:21,233 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:16:21,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-11-28 17:16:23,549 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:16:23,605 [salt.state       :300 ][INFO    ][31890] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-11-28 17:16:23,638 [salt.state       :915 ][INFO    ][31890] Loading fresh modules for state activity
2018-11-28 17:16:23,686 [salt.state       :1951][INFO    ][31890] Completed state [python-aodhclient] at time 17:16:23.686534 duration_in_ms=3456.615
2018-11-28 17:16:23,694 [salt.state       :1780][INFO    ][31890] Running state [aodh_ssl_mysql] at time 17:16:23.694104
2018-11-28 17:16:23,694 [salt.state       :1813][INFO    ][31890] Executing state test.show_notification for [aodh_ssl_mysql]
2018-11-28 17:16:23,695 [salt.state       :300 ][INFO    ][31890] Running aodh._ssl.mysql
2018-11-28 17:16:23,695 [salt.state       :1951][INFO    ][31890] Completed state [aodh_ssl_mysql] at time 17:16:23.695760 duration_in_ms=1.681
2018-11-28 17:16:23,696 [salt.state       :1780][INFO    ][31890] Running state [aodh_ssl_rabbitmq] at time 17:16:23.696469
2018-11-28 17:16:23,697 [salt.state       :1813][INFO    ][31890] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-11-28 17:16:23,697 [salt.state       :300 ][INFO    ][31890] Running aodh._ssl.rabbitmq
2018-11-28 17:16:23,698 [salt.state       :1951][INFO    ][31890] Completed state [aodh_ssl_rabbitmq] at time 17:16:23.698358 duration_in_ms=1.889
2018-11-28 17:16:23,699 [salt.state       :1780][INFO    ][31890] Running state [/etc/aodh/aodh.conf] at time 17:16:23.699379
2018-11-28 17:16:23,699 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-11-28 17:16:23,739 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-11-28 17:16:23,821 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-11-28 17:16:23,932 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-11-28 17:16:23,949 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-11-28 17:16:23,980 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-11-28 17:16:24,023 [salt.state       :300 ][INFO    ][31890] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.34
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +1121,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +1137,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +1175,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -671,36 +1189,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -775,995 +1263,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-11-28 17:16:24,032 [salt.state       :1951][INFO    ][31890] Completed state [/etc/aodh/aodh.conf] at time 17:16:24.032935 duration_in_ms=333.556
2018-11-28 17:16:24,034 [salt.state       :1780][INFO    ][31890] Running state [aodh-dbsync] at time 17:16:24.034314
2018-11-28 17:16:24,034 [salt.state       :1813][INFO    ][31890] Executing state cmd.run for [aodh-dbsync]
2018-11-28 17:16:24,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command '/bin/false' in directory '/root'
2018-11-28 17:16:24,091 [salt.state       :300 ][INFO    ][31890] onlyif execution failed
2018-11-28 17:16:24,092 [salt.state       :1951][INFO    ][31890] Completed state [aodh-dbsync] at time 17:16:24.092068 duration_in_ms=57.754
2018-11-28 17:16:24,118 [salt.state       :1780][INFO    ][31890] Running state [apache2] at time 17:16:24.118197
2018-11-28 17:16:24,118 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [apache2]
2018-11-28 17:16:25,103 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171625087744
2018-11-28 17:16:25,122 [salt.minion      :1432][INFO    ][6155] Starting a new job with PID 6155
2018-11-28 17:16:25,142 [salt.minion      :1711][INFO    ][6155] Returning information for job: 20181128171625087744
2018-11-28 17:16:25,257 [salt.state       :300 ][INFO    ][31890] All specified packages are already installed
2018-11-28 17:16:25,258 [salt.state       :1951][INFO    ][31890] Completed state [apache2] at time 17:16:25.258453 duration_in_ms=1140.256
2018-11-28 17:16:25,258 [salt.state       :1780][INFO    ][31890] Running state [openssl] at time 17:16:25.258916
2018-11-28 17:16:25,259 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [openssl]
2018-11-28 17:16:25,269 [salt.state       :300 ][INFO    ][31890] All specified packages are already installed
2018-11-28 17:16:25,269 [salt.state       :1951][INFO    ][31890] Completed state [openssl] at time 17:16:25.269949 duration_in_ms=11.033
2018-11-28 17:16:25,270 [salt.state       :1780][INFO    ][31890] Running state [a2enmod rewrite] at time 17:16:25.270837
2018-11-28 17:16:25,271 [salt.state       :1813][INFO    ][31890] Executing state cmd.run for [a2enmod rewrite]
2018-11-28 17:16:25,271 [salt.state       :300 ][INFO    ][31890] /etc/apache2/mods-enabled/rewrite.load exists
2018-11-28 17:16:25,272 [salt.state       :1951][INFO    ][31890] Completed state [a2enmod rewrite] at time 17:16:25.271979 duration_in_ms=1.142
2018-11-28 17:16:25,272 [salt.state       :1780][INFO    ][31890] Running state [libapache2-mod-wsgi] at time 17:16:25.272607
2018-11-28 17:16:25,272 [salt.state       :1813][INFO    ][31890] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-28 17:16:25,282 [salt.state       :300 ][INFO    ][31890] All specified packages are already installed
2018-11-28 17:16:25,282 [salt.state       :1951][INFO    ][31890] Completed state [libapache2-mod-wsgi] at time 17:16:25.282778 duration_in_ms=10.171
2018-11-28 17:16:25,283 [salt.state       :1780][INFO    ][31890] Running state [a2enmod wsgi] at time 17:16:25.283445
2018-11-28 17:16:25,283 [salt.state       :1813][INFO    ][31890] Executing state cmd.run for [a2enmod wsgi]
2018-11-28 17:16:25,284 [salt.state       :300 ][INFO    ][31890] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-28 17:16:25,284 [salt.state       :1951][INFO    ][31890] Completed state [a2enmod wsgi] at time 17:16:25.284536 duration_in_ms=1.091
2018-11-28 17:16:25,287 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:16:25.287118
2018-11-28 17:16:25,287 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-28 17:16:25,367 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-11-28 17:16:25,368 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:16:25.368287 duration_in_ms=81.168
2018-11-28 17:16:25,368 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:16:25.368652
2018-11-28 17:16:25,369 [salt.state       :1813][INFO    ][31890] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-28 17:16:25,369 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-28 17:16:25,369 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:16:25.369814 duration_in_ms=1.162
2018-11-28 17:16:25,370 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:16:25.370159
2018-11-28 17:16:25,370 [salt.state       :1813][INFO    ][31890] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-28 17:16:25,370 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-11-28 17:16:25,371 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:16:25.371147 duration_in_ms=0.988
2018-11-28 17:16:25,372 [salt.state       :1780][INFO    ][31890] Running state [a2enmod mpm_prefork] at time 17:16:25.372215
2018-11-28 17:16:25,372 [salt.state       :1813][INFO    ][31890] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-28 17:16:25,373 [salt.state       :300 ][INFO    ][31890] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-11-28 17:16:25,373 [salt.state       :1951][INFO    ][31890] Completed state [a2enmod mpm_prefork] at time 17:16:25.373303 duration_in_ms=1.088
2018-11-28 17:16:25,373 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:16:25.373631
2018-11-28 17:16:25,373 [salt.state       :1813][INFO    ][31890] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-28 17:16:25,374 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-28 17:16:25,374 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:16:25.374671 duration_in_ms=1.04
2018-11-28 17:16:25,375 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:16:25.374989
2018-11-28 17:16:25,375 [salt.state       :1813][INFO    ][31890] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-28 17:16:25,375 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-11-28 17:16:25,376 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:16:25.375968 duration_in_ms=0.979
2018-11-28 17:16:25,376 [salt.state       :1780][INFO    ][31890] Running state [apache_server_service_task] at time 17:16:25.376295
2018-11-28 17:16:25,376 [salt.state       :1813][INFO    ][31890] Executing state test.show_notification for [apache_server_service_task]
2018-11-28 17:16:25,377 [salt.state       :300 ][INFO    ][31890] Running apache.server.service
2018-11-28 17:16:25,377 [salt.state       :1951][INFO    ][31890] Completed state [apache_server_service_task] at time 17:16:25.377589 duration_in_ms=1.294
2018-11-28 17:16:25,378 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/ports.conf] at time 17:16:25.378234
2018-11-28 17:16:25,378 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-28 17:16:25,447 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/ports.conf is in the correct state
2018-11-28 17:16:25,447 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/ports.conf] at time 17:16:25.447358 duration_in_ms=69.124
2018-11-28 17:16:25,448 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/conf-available/security.conf] at time 17:16:25.447996
2018-11-28 17:16:25,448 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-28 17:16:25,519 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/conf-available/security.conf is in the correct state
2018-11-28 17:16:25,519 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/conf-available/security.conf] at time 17:16:25.519838 duration_in_ms=71.842
2018-11-28 17:16:25,528 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 17:16:25.528648
2018-11-28 17:16:25,529 [salt.state       :1813][INFO    ][31890] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-28 17:16:25,529 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-11-28 17:16:25,529 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 17:16:25.529693 duration_in_ms=1.045
2018-11-28 17:16:25,530 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:16:25.530331
2018-11-28 17:16:25,530 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-28 17:16:25,766 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-11-28 17:16:25,766 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:16:25.766360 duration_in_ms=236.029
2018-11-28 17:16:25,767 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:16:25.767037
2018-11-28 17:16:25,767 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-28 17:16:26,009 [salt.state       :300 ][INFO    ][31890] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-11-28 17:16:26,010 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:16:26.010239 duration_in_ms=243.201
2018-11-28 17:16:26,014 [salt.state       :1780][INFO    ][31890] Running state [apache2] at time 17:16:26.014171
2018-11-28 17:16:26,014 [salt.state       :1813][INFO    ][31890] Executing state service.running for [apache2]
2018-11-28 17:16:26,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-28 17:16:26,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:16:26,067 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:16:26,090 [salt.state       :300 ][INFO    ][31890] The service apache2 is already running
2018-11-28 17:16:26,091 [salt.state       :1951][INFO    ][31890] Completed state [apache2] at time 17:16:26.091411 duration_in_ms=77.239
2018-11-28 17:16:26,093 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/conf-enabled/security.conf] at time 17:16:26.093255
2018-11-28 17:16:26,094 [salt.state       :1813][INFO    ][31890] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-28 17:16:26,098 [salt.state       :300 ][INFO    ][31890] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-11-28 17:16:26,098 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/conf-enabled/security.conf] at time 17:16:26.098490 duration_in_ms=5.235
2018-11-28 17:16:26,099 [salt.state       :1780][INFO    ][31890] Running state [/etc/default/aodh-evaluator] at time 17:16:26.099283
2018-11-28 17:16:26,099 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-11-28 17:16:26,121 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-11-28 17:16:26,136 [salt.state       :300 ][INFO    ][31890] File changed:
New file
2018-11-28 17:16:26,136 [salt.state       :1951][INFO    ][31890] Completed state [/etc/default/aodh-evaluator] at time 17:16:26.136388 duration_in_ms=37.104
2018-11-28 17:16:26,138 [salt.state       :1780][INFO    ][31890] Running state [/etc/default/aodh-notifier] at time 17:16:26.138071
2018-11-28 17:16:26,138 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/default/aodh-notifier]
2018-11-28 17:16:26,164 [salt.state       :300 ][INFO    ][31890] File changed:
New file
2018-11-28 17:16:26,164 [salt.state       :1951][INFO    ][31890] Completed state [/etc/default/aodh-notifier] at time 17:16:26.164690 duration_in_ms=26.618
2018-11-28 17:16:26,165 [salt.state       :1780][INFO    ][31890] Running state [/etc/default/aodh-listener] at time 17:16:26.165464
2018-11-28 17:16:26,165 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/default/aodh-listener]
2018-11-28 17:16:26,187 [salt.state       :300 ][INFO    ][31890] File changed:
New file
2018-11-28 17:16:26,187 [salt.state       :1951][INFO    ][31890] Completed state [/etc/default/aodh-listener] at time 17:16:26.187449 duration_in_ms=21.985
2018-11-28 17:16:26,188 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 17:16:26.188209
2018-11-28 17:16:26,188 [salt.state       :1813][INFO    ][31890] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-11-28 17:16:26,203 [salt.fileclient  :1219][INFO    ][31890] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-11-28 17:16:26,256 [salt.state       :300 ][INFO    ][31890] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.34:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-11-28 17:16:26,258 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 17:16:26.258305 duration_in_ms=70.096
2018-11-28 17:16:26,258 [salt.state       :1780][INFO    ][31890] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 17:16:26.258649
2018-11-28 17:16:26,259 [salt.state       :1813][INFO    ][31890] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-11-28 17:16:26,260 [salt.state       :300 ][INFO    ][31890] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-11-28 17:16:26,261 [salt.state       :1951][INFO    ][31890] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 17:16:26.260958 duration_in_ms=2.308
2018-11-28 17:16:26,262 [salt.state       :1780][INFO    ][31890] Running state [apache2] at time 17:16:26.262186
2018-11-28 17:16:26,262 [salt.state       :1813][INFO    ][31890] Executing state service.running for [apache2]
2018-11-28 17:16:26,263 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:16:26,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-28 17:16:26,309 [salt.state       :300 ][INFO    ][31890] The service apache2 is already running
2018-11-28 17:16:26,310 [salt.state       :1951][INFO    ][31890] Completed state [apache2] at time 17:16:26.310310 duration_in_ms=48.122
2018-11-28 17:16:26,311 [salt.state       :1780][INFO    ][31890] Running state [apache2] at time 17:16:26.311208
2018-11-28 17:16:26,312 [salt.state       :1813][INFO    ][31890] Executing state service.mod_watch for [apache2]
2018-11-28 17:16:26,314 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-28 17:16:26,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-11-28 17:16:28,657 [salt.state       :300 ][INFO    ][31890] {'apache2': True}
2018-11-28 17:16:28,657 [salt.state       :1951][INFO    ][31890] Completed state [apache2] at time 17:16:28.657624 duration_in_ms=2346.416
2018-11-28 17:16:28,660 [salt.state       :1780][INFO    ][31890] Running state [aodh-evaluator] at time 17:16:28.660371
2018-11-28 17:16:28,660 [salt.state       :1813][INFO    ][31890] Executing state service.running for [aodh-evaluator]
2018-11-28 17:16:28,663 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-11-28 17:16:28,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-11-28 17:16:28,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-11-28 17:16:28,747 [salt.state       :300 ][INFO    ][31890] The service aodh-evaluator is already running
2018-11-28 17:16:28,748 [salt.state       :1951][INFO    ][31890] Completed state [aodh-evaluator] at time 17:16:28.748341 duration_in_ms=87.969
2018-11-28 17:16:28,748 [salt.state       :1780][INFO    ][31890] Running state [aodh-evaluator] at time 17:16:28.748703
2018-11-28 17:16:28,749 [salt.state       :1813][INFO    ][31890] Executing state service.mod_watch for [aodh-evaluator]
2018-11-28 17:16:28,750 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-11-28 17:16:28,771 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-11-28 17:16:28,997 [salt.state       :300 ][INFO    ][31890] {'aodh-evaluator': True}
2018-11-28 17:16:28,997 [salt.state       :1951][INFO    ][31890] Completed state [aodh-evaluator] at time 17:16:28.997759 duration_in_ms=249.055
2018-11-28 17:16:29,001 [salt.state       :1780][INFO    ][31890] Running state [aodh-notifier] at time 17:16:29.001435
2018-11-28 17:16:29,001 [salt.state       :1813][INFO    ][31890] Executing state service.running for [aodh-notifier]
2018-11-28 17:16:29,004 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-11-28 17:16:29,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-11-28 17:16:29,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-11-28 17:16:29,081 [salt.state       :300 ][INFO    ][31890] The service aodh-notifier is already running
2018-11-28 17:16:29,081 [salt.state       :1951][INFO    ][31890] Completed state [aodh-notifier] at time 17:16:29.081537 duration_in_ms=80.102
2018-11-28 17:16:29,081 [salt.state       :1780][INFO    ][31890] Running state [aodh-notifier] at time 17:16:29.081895
2018-11-28 17:16:29,082 [salt.state       :1813][INFO    ][31890] Executing state service.mod_watch for [aodh-notifier]
2018-11-28 17:16:29,083 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-11-28 17:16:29,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-11-28 17:16:35,235 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171635218476
2018-11-28 17:16:35,259 [salt.minion      :1432][INFO    ][6444] Starting a new job with PID 6444
2018-11-28 17:16:35,278 [salt.minion      :1711][INFO    ][6444] Returning information for job: 20181128171635218476
2018-11-28 17:16:44,307 [salt.state       :300 ][INFO    ][31890] {'aodh-notifier': True}
2018-11-28 17:16:44,307 [salt.state       :1951][INFO    ][31890] Completed state [aodh-notifier] at time 17:16:44.307661 duration_in_ms=15225.765
2018-11-28 17:16:44,309 [salt.state       :1780][INFO    ][31890] Running state [aodh-listener] at time 17:16:44.309944
2018-11-28 17:16:44,312 [salt.state       :1813][INFO    ][31890] Executing state service.running for [aodh-listener]
2018-11-28 17:16:44,314 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-11-28 17:16:44,345 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-11-28 17:16:44,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-11-28 17:16:44,382 [salt.state       :300 ][INFO    ][31890] The service aodh-listener is already running
2018-11-28 17:16:44,383 [salt.state       :1951][INFO    ][31890] Completed state [aodh-listener] at time 17:16:44.383653 duration_in_ms=73.708
2018-11-28 17:16:44,384 [salt.state       :1780][INFO    ][31890] Running state [aodh-listener] at time 17:16:44.384384
2018-11-28 17:16:44,385 [salt.state       :1813][INFO    ][31890] Executing state service.mod_watch for [aodh-listener]
2018-11-28 17:16:44,386 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-11-28 17:16:44,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][31890] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-11-28 17:16:45,379 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171645357056
2018-11-28 17:16:45,407 [salt.minion      :1432][INFO    ][6497] Starting a new job with PID 6497
2018-11-28 17:16:45,426 [salt.minion      :1711][INFO    ][6497] Returning information for job: 20181128171645357056
2018-11-28 17:16:55,527 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171655508872
2018-11-28 17:16:55,552 [salt.minion      :1432][INFO    ][6508] Starting a new job with PID 6508
2018-11-28 17:16:55,572 [salt.minion      :1711][INFO    ][6508] Returning information for job: 20181128171655508872
2018-11-28 17:16:59,551 [salt.state       :300 ][INFO    ][31890] {'aodh-listener': True}
2018-11-28 17:16:59,551 [salt.state       :1951][INFO    ][31890] Completed state [aodh-listener] at time 17:16:59.551622 duration_in_ms=15167.238
2018-11-28 17:16:59,563 [salt.minion      :1711][INFO    ][31890] Returning information for job: 20181128171539483959
2018-11-28 17:17:00,154 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command state.sls with jid 20181128171700138452
2018-11-28 17:17:00,170 [salt.minion      :1432][INFO    ][6564] Starting a new job with PID 6564
2018-11-28 17:17:05,248 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171705229773
2018-11-28 17:17:05,273 [salt.minion      :1432][INFO    ][6582] Starting a new job with PID 6582
2018-11-28 17:17:05,293 [salt.minion      :1711][INFO    ][6582] Returning information for job: 20181128171705229773
2018-11-28 17:17:08,233 [salt.state       :915 ][INFO    ][6564] Loading fresh modules for state activity
2018-11-28 17:17:08,285 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-11-28 17:17:08,314 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-11-28 17:17:08,481 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2018-11-28 17:17:10,400 [salt.state       :1780][INFO    ][6564] Running state [ceilometer-agent-central] at time 17:17:10.400164
2018-11-28 17:17:10,401 [salt.state       :1813][INFO    ][6564] Executing state pkg.installed for [ceilometer-agent-central]
2018-11-28 17:17:10,402 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:17:10,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-11-28 17:17:11,043 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-28 17:17:13,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:17:13,161 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-11-28 17:17:15,407 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171715380707
2018-11-28 17:17:15,431 [salt.minion      :1432][INFO    ][7054] Starting a new job with PID 7054
2018-11-28 17:17:15,469 [salt.minion      :1711][INFO    ][7054] Returning information for job: 20181128171715380707
2018-11-28 17:17:25,599 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171725582670
2018-11-28 17:17:25,619 [salt.minion      :1432][INFO    ][8851] Starting a new job with PID 8851
2018-11-28 17:17:25,661 [salt.minion      :1711][INFO    ][8851] Returning information for job: 20181128171725582670
2018-11-28 17:17:31,861 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:17:31,922 [salt.state       :300 ][INFO    ][6564] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-11-28 17:17:31,962 [salt.state       :915 ][INFO    ][6564] Loading fresh modules for state activity
2018-11-28 17:17:32,194 [salt.state       :1951][INFO    ][6564] Completed state [ceilometer-agent-central] at time 17:17:32.194556 duration_in_ms=21794.392
2018-11-28 17:17:32,201 [salt.state       :1780][INFO    ][6564] Running state [python-ceilometerclient] at time 17:17:32.201112
2018-11-28 17:17:32,201 [salt.state       :1813][INFO    ][6564] Executing state pkg.installed for [python-ceilometerclient]
2018-11-28 17:17:33,040 [salt.state       :300 ][INFO    ][6564] All specified packages are already installed
2018-11-28 17:17:33,040 [salt.state       :1951][INFO    ][6564] Completed state [python-ceilometerclient] at time 17:17:33.040429 duration_in_ms=839.316
2018-11-28 17:17:33,040 [salt.state       :1780][INFO    ][6564] Running state [ceilometer-agent-notification] at time 17:17:33.040804
2018-11-28 17:17:33,041 [salt.state       :1813][INFO    ][6564] Executing state pkg.installed for [ceilometer-agent-notification]
2018-11-28 17:17:33,072 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-28 17:17:33,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-11-28 17:17:35,746 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command saltutil.find_job with jid 20181128171735730116
2018-11-28 17:17:35,774 [salt.minion      :1432][INFO    ][9388] Starting a new job with PID 9388
2018-11-28 17:17:35,818 [salt.minion      :1711][INFO    ][9388] Returning information for job: 20181128171735730116
2018-11-28 17:17:36,619 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-28 17:17:36,676 [salt.state       :300 ][INFO    ][6564] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'

2018-11-28 17:17:36,708 [salt.state       :915 ][INFO    ][6564] Loading fresh modules for state activity
2018-11-28 17:17:36,766 [salt.state       :1951][INFO    ][6564] Completed state [ceilometer-agent-notification] at time 17:17:36.766471 duration_in_ms=3725.665
2018-11-28 17:17:36,770 [salt.state       :1780][INFO    ][6564] Running state [ceilometer_ssl_rabbitmq] at time 17:17:36.770441
2018-11-28 17:17:36,771 [salt.state       :1813][INFO    ][6564] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2018-11-28 17:17:36,771 [salt.state       :300 ][INFO    ][6564] Running ceilometer._ssl.rabbitmq
2018-11-28 17:17:36,772 [salt.state       :1951][INFO    ][6564] Completed state [ceilometer_ssl_rabbitmq] at time 17:17:36.772108 duration_in_ms=1.667
2018-11-28 17:17:36,780 [salt.state       :1780][INFO    ][6564] Running state [/etc/ceilometer/ceilometer.conf] at time 17:17:36.780436
2018-11-28 17:17:36,781 [salt.state       :1813][INFO    ][6564] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-11-28 17:17:36,830 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-11-28 17:17:37,165 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-11-28 17:17:37,225 [salt.state       :300 ][INFO    ][6564] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-qiuSbH/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-11-28 17:17:37,227 [salt.state       :1951][INFO    ][6564] Completed state [/etc/ceilometer/ceilometer.conf] at time 17:17:37.227660 duration_in_ms=447.224
2018-11-28 17:17:37,228 [salt.state       :1780][INFO    ][6564] Running state [/etc/default/ceilometer-agent-central] at time 17:17:37.228148
2018-11-28 17:17:37,228 [salt.state       :1813][INFO    ][6564] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-11-28 17:17:37,251 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-11-28 17:17:37,265 [salt.state       :300 ][INFO    ][6564] File changed:
New file
2018-11-28 17:17:37,270 [salt.state       :1951][INFO    ][6564] Completed state [/etc/default/ceilometer-agent-central] at time 17:17:37.270433 duration_in_ms=42.285
2018-11-28 17:17:37,270 [salt.state       :1780][INFO    ][6564] Running state [/etc/default/ceilometer-agent-notification] at time 17:17:37.270899
2018-11-28 17:17:37,271 [salt.state       :1813][INFO    ][6564] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-11-28 17:17:37,313 [salt.state       :300 ][INFO    ][6564] File changed:
New file
2018-11-28 17:17:37,313 [salt.state       :1951][INFO    ][6564] Completed state [/etc/default/ceilometer-agent-notification] at time 17:17:37.313551 duration_in_ms=42.651
2018-11-28 17:17:37,342 [salt.state       :1780][INFO    ][6564] Running state [python-gnocchiclient] at time 17:17:37.334051
2018-11-28 17:17:37,342 [salt.state       :1813][INFO    ][6564] Executing state pkg.latest for [python-gnocchiclient]
2018-11-28 17:17:37,357 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-11-28 17:17:37,844 [salt.state       :300 ][INFO    ][6564] Package python-gnocchiclient is already up-to-date
2018-11-28 17:17:37,846 [salt.state       :1951][INFO    ][6564] Completed state [python-gnocchiclient] at time 17:17:37.846589 duration_in_ms=512.538
2018-11-28 17:17:37,847 [salt.state       :1780][INFO    ][6564] Running state [/etc/ceilometer/pipeline.yaml] at time 17:17:37.847330
2018-11-28 17:17:37,847 [salt.state       :1813][INFO    ][6564] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-11-28 17:17:37,880 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-11-28 17:17:38,026 [salt.state       :300 ][INFO    ][6564] File changed:
New file
2018-11-28 17:17:38,027 [salt.state       :1951][INFO    ][6564] Completed state [/etc/ceilometer/pipeline.yaml] at time 17:17:38.027176 duration_in_ms=179.846
2018-11-28 17:17:38,027 [salt.state       :1780][INFO    ][6564] Running state [/etc/ceilometer/event_pipeline.yaml] at time 17:17:38.027683
2018-11-28 17:17:38,028 [salt.state       :1813][INFO    ][6564] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-11-28 17:17:38,050 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-11-28 17:17:38,164 [salt.state       :300 ][INFO    ][6564] File changed:
New file
2018-11-28 17:17:38,164 [salt.state       :1951][INFO    ][6564] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 17:17:38.164716 duration_in_ms=137.033
2018-11-28 17:17:38,165 [salt.state       :1780][INFO    ][6564] Running state [/etc/ceilometer/event_definitions.yaml] at time 17:17:38.165232
2018-11-28 17:17:38,165 [salt.state       :1813][INFO    ][6564] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-11-28 17:17:38,183 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-11-28 17:17:38,198 [salt.state       :300 ][INFO    ][6564] File changed:
New file
2018-11-28 17:17:38,198 [salt.state       :1951][INFO    ][6564] Completed state [/etc/ceilometer/event_definitions.yaml] at time 17:17:38.198878 duration_in_ms=33.646
2018-11-28 17:17:38,199 [salt.state       :1780][INFO    ][6564] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 17:17:38.199400
2018-11-28 17:17:38,199 [salt.state       :1813][INFO    ][6564] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-11-28 17:17:38,213 [salt.fileclient  :1219][INFO    ][6564] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-11-28 17:17:38,222 [salt.state       :300 ][INFO    ][6564] File changed:
New file
2018-11-28 17:17:38,223 [salt.state       :1951][INFO    ][6564] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 17:17:38.222995 duration_in_ms=23.595
2018-11-28 17:17:38,843 [salt.state       :1780][INFO    ][6564] Running state [ceilometer-agent-central] at time 17:17:38.843228
2018-11-28 17:17:38,843 [salt.state       :1813][INFO    ][6564] Executing state service.running for [ceilometer-agent-central]
2018-11-28 17:17:38,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-11-28 17:17:38,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-28 17:17:38,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-28 17:17:38,904 [salt.state       :300 ][INFO    ][6564] The service ceilometer-agent-central is already running
2018-11-28 17:17:38,904 [salt.state       :1951][INFO    ][6564] Completed state [ceilometer-agent-central] at time 17:17:38.904525 duration_in_ms=61.297
2018-11-28 17:17:38,904 [salt.state       :1780][INFO    ][6564] Running state [ceilometer-agent-central] at time 17:17:38.904929
2018-11-28 17:17:38,905 [salt.state       :1813][INFO    ][6564] Executing state service.mod_watch for [ceilometer-agent-central]
2018-11-28 17:17:38,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-28 17:17:38,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-28 17:17:39,123 [salt.state       :300 ][INFO    ][6564] {'ceilometer-agent-central': True}
2018-11-28 17:17:39,124 [salt.state       :1951][INFO    ][6564] Completed state [ceilometer-agent-central] at time 17:17:39.124410 duration_in_ms=219.48
2018-11-28 17:17:39,132 [salt.state       :1780][INFO    ][6564] Running state [ceilometer-agent-notification] at time 17:17:39.132805
2018-11-28 17:17:39,133 [salt.state       :1813][INFO    ][6564] Executing state service.running for [ceilometer-agent-notification]
2018-11-28 17:17:39,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-11-28 17:17:39,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-28 17:17:39,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-28 17:17:39,246 [salt.state       :300 ][INFO    ][6564] The service ceilometer-agent-notification is already running
2018-11-28 17:17:39,247 [salt.state       :1951][INFO    ][6564] Completed state [ceilometer-agent-notification] at time 17:17:39.246913 duration_in_ms=114.107
2018-11-28 17:17:39,247 [salt.state       :1780][INFO    ][6564] Running state [ceilometer-agent-notification] at time 17:17:39.247252
2018-11-28 17:17:39,247 [salt.state       :1813][INFO    ][6564] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-11-28 17:17:39,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-28 17:17:39,288 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6564] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-28 17:17:39,489 [salt.state       :300 ][INFO    ][6564] {'ceilometer-agent-notification': True}
2018-11-28 17:17:39,489 [salt.state       :1951][INFO    ][6564] Completed state [ceilometer-agent-notification] at time 17:17:39.489754 duration_in_ms=242.501
2018-11-28 17:17:39,501 [salt.minion      :1711][INFO    ][6564] Returning information for job: 20181128171700138452
2018-11-28 17:29:44,059 [salt.minion      :1308][INFO    ][3044] User sudo_ubuntu Executing command cp.push_dir with jid 20181128172944039988
2018-11-28 17:29:44,094 [salt.minion      :1432][INFO    ][9656] Starting a new job with PID 9656
