2018-11-10 18:58:00,750 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:00,874 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:00,880 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:00,883 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:00,886 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,205 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,210 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,214 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,287 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,291 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,295 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,300 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,418 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,454 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,459 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,462 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,466 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,470 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,474 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,478 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,483 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,486 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,490 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,495 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,498 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,503 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,507 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,511 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,515 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,519 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,525 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,528 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,531 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,537 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,541 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,546 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,549 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,553 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,558 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,562 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,567 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,571 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,575 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,580 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,584 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,589 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,593 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,598 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,601 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,607 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,612 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,615 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,622 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,626 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,631 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,635 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:01,641 [salt.utils.decorators:82  ][ERROR   ][1693] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-10 18:58:29,016 [salt.utils.decorators:613 ][WARNING ][1693] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-10 18:58:31,482 [salt.loaded.int.states.file:2298][WARNING ][1693] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 18:58:34,413 [salt.loaded.int.states.file:2298][WARNING ][1693] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 18:58:38,884 [salt.loaded.int.states.file:2298][WARNING ][1693] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 18:58:43,326 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2926] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-11-10 18:58:43,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2926] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-11-10 18:58:43,423 [salt.utils.parsers:1051][WARNING ][1330] Minion received a SIGTERM. Exiting.
2018-11-10 18:58:44,463 [salt.cli.daemons :293 ][INFO    ][2985] Setting up the Salt Minion "mdb03.mcp-ovs-dpdk-ha.local"
2018-11-10 18:58:44,622 [salt.cli.daemons :82  ][INFO    ][2985] Starting up the Salt Minion
2018-11-10 18:58:44,624 [salt.utils.event :1017][INFO    ][2985] Starting pull socket on /var/run/salt/minion/minion_event_b590c73964_pull.ipc
2018-11-10 18:58:45,587 [salt.minion      :976 ][INFO    ][2985] Creating minion process manager
2018-11-10 18:58:47,085 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2985] Executing command ['date', '+%z'] in directory '/root'
2018-11-10 18:58:47,120 [salt.utils.schedule:568 ][INFO    ][2985] Updating job settings for scheduled job: __mine_interval
2018-11-10 18:58:47,123 [salt.minion      :1108][INFO    ][2985] Added mine.update to scheduler
2018-11-10 18:58:47,131 [salt.minion      :1975][INFO    ][2985] Minion is starting as user 'root'
2018-11-10 18:58:47,144 [salt.minion      :2336][INFO    ][2985] Minion is ready to receive requests!
2018-11-10 18:59:24,167 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.apply with jid 20181110185924151568
2018-11-10 18:59:24,191 [salt.minion      :1432][INFO    ][3079] Starting a new job with PID 3079
2018-11-10 18:59:30,498 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110185930486442
2018-11-10 18:59:30,523 [salt.minion      :1432][INFO    ][3086] Starting a new job with PID 3086
2018-11-10 18:59:30,548 [salt.minion      :1711][INFO    ][3086] Returning information for job: 20181110185930486442
2018-11-10 18:59:31,661 [salt.state       :915 ][INFO    ][3079] Loading fresh modules for state activity
2018-11-10 18:59:32,882 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-11-10 18:59:32,927 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-11-10 18:59:33,126 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-11-10 18:59:33,274 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-11-10 18:59:33,426 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2018-11-10 18:59:33,588 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2018-11-10 18:59:33,746 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2018-11-10 18:59:33,901 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2018-11-10 18:59:34,091 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-11-10 18:59:34,333 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-11-10 18:59:34,498 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-11-10 18:59:34,641 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-11-10 18:59:35,573 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-11-10 18:59:35,618 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-11-10 18:59:35,770 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-11-10 18:59:35,935 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-11-10 18:59:36,086 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-11-10 18:59:36,275 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-11-10 18:59:36,434 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-11-10 18:59:36,581 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2018-11-10 18:59:36,734 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-11-10 18:59:36,926 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2018-11-10 18:59:37,111 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-11-10 18:59:37,270 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-11-10 18:59:37,427 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-11-10 18:59:38,304 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-11-10 18:59:38,459 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-11-10 18:59:38,687 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-11-10 18:59:38,975 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-11-10 18:59:39,127 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-11-10 18:59:39,281 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2018-11-10 18:59:39,462 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-11-10 18:59:39,495 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-11-10 18:59:39,563 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-11-10 18:59:39,631 [salt.state       :1780][INFO    ][3079] Running state [/etc/environment] at time 18:59:39.631565
2018-11-10 18:59:39,632 [salt.state       :1813][INFO    ][3079] Executing state file.blockreplace for [/etc/environment]
2018-11-10 18:59:39,644 [salt.state       :300 ][INFO    ][3079] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-11-10 18:59:39,644 [salt.state       :1951][INFO    ][3079] Completed state [/etc/environment] at time 18:59:39.644577 duration_in_ms=13.013
2018-11-10 18:59:39,644 [salt.state       :1780][INFO    ][3079] Running state [/etc/profile.d] at time 18:59:39.644869
2018-11-10 18:59:39,645 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/profile.d]
2018-11-10 18:59:39,647 [salt.state       :300 ][INFO    ][3079] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-11-10 18:59:39,647 [salt.state       :1951][INFO    ][3079] Completed state [/etc/profile.d] at time 18:59:39.647282 duration_in_ms=2.413
2018-11-10 18:59:39,647 [salt.state       :1780][INFO    ][3079] Running state [/etc/bash.bashrc] at time 18:59:39.647516
2018-11-10 18:59:39,647 [salt.state       :1813][INFO    ][3079] Executing state file.blockreplace for [/etc/bash.bashrc]
2018-11-10 18:59:40,587 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110185940575618
2018-11-10 18:59:40,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['git', '--version'] in directory '/root'
2018-11-10 18:59:40,661 [salt.minion      :1432][INFO    ][3163] Starting a new job with PID 3163
2018-11-10 18:59:40,687 [salt.minion      :1711][INFO    ][3163] Returning information for job: 20181110185940575618
2018-11-10 18:59:40,881 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2018-11-10 18:59:40,910 [salt.state       :300 ][INFO    ][3079] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-11-10 18:59:40,911 [salt.state       :1951][INFO    ][3079] Completed state [/etc/bash.bashrc] at time 18:59:40.910929 duration_in_ms=1263.41
2018-11-10 18:59:40,911 [salt.state       :1780][INFO    ][3079] Running state [/etc/profile] at time 18:59:40.911371
2018-11-10 18:59:40,912 [salt.state       :1813][INFO    ][3079] Executing state file.blockreplace for [/etc/profile]
2018-11-10 18:59:40,923 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'test -f /etc/profile' in directory '/root'
2018-11-10 18:59:41,020 [salt.state       :300 ][INFO    ][3079] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-11-10 18:59:41,021 [salt.state       :1951][INFO    ][3079] Completed state [/etc/profile] at time 18:59:41.021725 duration_in_ms=110.353
2018-11-10 18:59:41,022 [salt.state       :1780][INFO    ][3079] Running state [/etc/login.defs] at time 18:59:41.022133
2018-11-10 18:59:41,022 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/login.defs]
2018-11-10 18:59:41,053 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2018-11-10 18:59:41,205 [salt.state       :300 ][INFO    ][3079] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2018-11-10 18:59:41,207 [salt.state       :1951][INFO    ][3079] Completed state [/etc/login.defs] at time 18:59:41.207283 duration_in_ms=185.15
2018-11-10 18:59:41,219 [salt.state       :1780][INFO    ][3079] Running state [at] at time 18:59:41.219681
2018-11-10 18:59:41,220 [salt.state       :1813][INFO    ][3079] Executing state pkg.installed for [at]
2018-11-10 18:59:41,221 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 18:59:41,736 [salt.state       :300 ][INFO    ][3079] All specified packages are already installed
2018-11-10 18:59:41,736 [salt.state       :1951][INFO    ][3079] Completed state [at] at time 18:59:41.736522 duration_in_ms=516.84
2018-11-10 18:59:41,741 [salt.state       :1780][INFO    ][3079] Running state [atd] at time 18:59:41.741224
2018-11-10 18:59:41,741 [salt.state       :1813][INFO    ][3079] Executing state service.running for [atd]
2018-11-10 18:59:41,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2018-11-10 18:59:41,781 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2018-11-10 18:59:41,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2018-11-10 18:59:41,821 [salt.state       :300 ][INFO    ][3079] The service atd is already running
2018-11-10 18:59:41,822 [salt.state       :1951][INFO    ][3079] Completed state [atd] at time 18:59:41.822265 duration_in_ms=81.04
2018-11-10 18:59:41,826 [salt.state       :1780][INFO    ][3079] Running state [cron] at time 18:59:41.825970
2018-11-10 18:59:41,826 [salt.state       :1813][INFO    ][3079] Executing state pkg.installed for [cron]
2018-11-10 18:59:41,840 [salt.state       :300 ][INFO    ][3079] All specified packages are already installed
2018-11-10 18:59:41,840 [salt.state       :1951][INFO    ][3079] Completed state [cron] at time 18:59:41.840609 duration_in_ms=14.639
2018-11-10 18:59:41,842 [salt.state       :1780][INFO    ][3079] Running state [/etc/at.allow] at time 18:59:41.842331
2018-11-10 18:59:41,842 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/at.allow]
2018-11-10 18:59:41,860 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2018-11-10 18:59:41,875 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:41,876 [salt.state       :1951][INFO    ][3079] Completed state [/etc/at.allow] at time 18:59:41.876541 duration_in_ms=34.198
2018-11-10 18:59:41,876 [salt.state       :1780][INFO    ][3079] Running state [/etc/at.deny] at time 18:59:41.876848
2018-11-10 18:59:41,877 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/at.deny]
2018-11-10 18:59:41,877 [salt.state       :300 ][INFO    ][3079] {'removed': '/etc/at.deny'}
2018-11-10 18:59:41,878 [salt.state       :1951][INFO    ][3079] Completed state [/etc/at.deny] at time 18:59:41.878059 duration_in_ms=1.212
2018-11-10 18:59:41,879 [salt.state       :1780][INFO    ][3079] Running state [cron] at time 18:59:41.879416
2018-11-10 18:59:41,879 [salt.state       :1813][INFO    ][3079] Executing state service.running for [cron]
2018-11-10 18:59:41,880 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2018-11-10 18:59:41,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2018-11-10 18:59:41,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2018-11-10 18:59:41,946 [salt.state       :300 ][INFO    ][3079] The service cron is already running
2018-11-10 18:59:41,947 [salt.state       :1951][INFO    ][3079] Completed state [cron] at time 18:59:41.947240 duration_in_ms=67.822
2018-11-10 18:59:41,950 [salt.state       :1780][INFO    ][3079] Running state [/etc/cron.allow] at time 18:59:41.950082
2018-11-10 18:59:41,951 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/cron.allow]
2018-11-10 18:59:41,979 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:41,979 [salt.state       :1951][INFO    ][3079] Completed state [/etc/cron.allow] at time 18:59:41.979805 duration_in_ms=29.723
2018-11-10 18:59:41,980 [salt.state       :1780][INFO    ][3079] Running state [/etc/cron.deny] at time 18:59:41.980083
2018-11-10 18:59:41,980 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/cron.deny]
2018-11-10 18:59:41,980 [salt.state       :300 ][INFO    ][3079] File /etc/cron.deny is not present
2018-11-10 18:59:41,981 [salt.state       :1951][INFO    ][3079] Completed state [/etc/cron.deny] at time 18:59:41.980963 duration_in_ms=0.88
2018-11-10 18:59:41,982 [salt.state       :1780][INFO    ][3079] Running state [/etc/crontab] at time 18:59:41.982357
2018-11-10 18:59:41,982 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/crontab]
2018-11-10 18:59:41,983 [salt.state       :300 ][INFO    ][3079] {'mode': '0600'}
2018-11-10 18:59:41,984 [salt.state       :1951][INFO    ][3079] Completed state [/etc/crontab] at time 18:59:41.984109 duration_in_ms=1.753
2018-11-10 18:59:41,985 [salt.state       :1780][INFO    ][3079] Running state [/etc/cron.d] at time 18:59:41.985178
2018-11-10 18:59:41,985 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/cron.d]
2018-11-10 18:59:41,986 [salt.state       :300 ][INFO    ][3079] {'mode': '0600'}
2018-11-10 18:59:41,987 [salt.state       :1951][INFO    ][3079] Completed state [/etc/cron.d] at time 18:59:41.986981 duration_in_ms=1.803
2018-11-10 18:59:41,988 [salt.state       :1780][INFO    ][3079] Running state [/etc/cron.daily] at time 18:59:41.988290
2018-11-10 18:59:41,988 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/cron.daily]
2018-11-10 18:59:41,990 [salt.state       :300 ][INFO    ][3079] {'mode': '0600'}
2018-11-10 18:59:41,990 [salt.state       :1951][INFO    ][3079] Completed state [/etc/cron.daily] at time 18:59:41.990925 duration_in_ms=2.635
2018-11-10 18:59:41,992 [salt.state       :1780][INFO    ][3079] Running state [/etc/cron.hourly] at time 18:59:41.992542
2018-11-10 18:59:41,992 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/cron.hourly]
2018-11-10 18:59:41,994 [salt.state       :300 ][INFO    ][3079] {'mode': '0600'}
2018-11-10 18:59:41,995 [salt.state       :1951][INFO    ][3079] Completed state [/etc/cron.hourly] at time 18:59:41.995011 duration_in_ms=2.469
2018-11-10 18:59:41,996 [salt.state       :1780][INFO    ][3079] Running state [/etc/cron.monthly] at time 18:59:41.996046
2018-11-10 18:59:41,996 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/cron.monthly]
2018-11-10 18:59:41,997 [salt.state       :300 ][INFO    ][3079] {'mode': '0600'}
2018-11-10 18:59:41,998 [salt.state       :1951][INFO    ][3079] Completed state [/etc/cron.monthly] at time 18:59:41.998100 duration_in_ms=2.054
2018-11-10 18:59:42,000 [salt.state       :1780][INFO    ][3079] Running state [/etc/cron.weekly] at time 18:59:41.999972
2018-11-10 18:59:42,000 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/cron.weekly]
2018-11-10 18:59:42,001 [salt.state       :300 ][INFO    ][3079] {'mode': '0600'}
2018-11-10 18:59:42,002 [salt.state       :1951][INFO    ][3079] Completed state [/etc/cron.weekly] at time 18:59:42.002072 duration_in_ms=2.1
2018-11-10 18:59:42,005 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 18:59:42.005883
2018-11-10 18:59:42,006 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-11-10 18:59:42,025 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-11-10 18:59:42,042 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:42,042 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 18:59:42.042474 duration_in_ms=36.59
2018-11-10 18:59:42,042 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 18:59:42.042727
2018-11-10 18:59:42,043 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-11-10 18:59:42,066 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:42,066 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 18:59:42.066830 duration_in_ms=24.102
2018-11-10 18:59:42,068 [salt.state       :1780][INFO    ][3079] Running state [linux_repo_prereq_pkgs] at time 18:59:42.068794
2018-11-10 18:59:42,069 [salt.state       :1813][INFO    ][3079] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-11-10 18:59:42,083 [salt.state       :300 ][INFO    ][3079] All specified packages are already installed
2018-11-10 18:59:42,083 [salt.state       :1951][INFO    ][3079] Completed state [linux_repo_prereq_pkgs] at time 18:59:42.083515 duration_in_ms=14.721
2018-11-10 18:59:42,084 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 18:59:42.084062
2018-11-10 18:59:42,084 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-11-10 18:59:42,084 [salt.state       :300 ][INFO    ][3079] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-11-10 18:59:42,084 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 18:59:42.084871 duration_in_ms=0.809
2018-11-10 18:59:42,085 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 18:59:42.085101
2018-11-10 18:59:42,085 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-11-10 18:59:42,085 [salt.state       :300 ][INFO    ][3079] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-11-10 18:59:42,085 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 18:59:42.085833 duration_in_ms=0.733
2018-11-10 18:59:42,086 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 18:59:42.086061
2018-11-10 18:59:42,086 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-11-10 18:59:42,106 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-11-10 18:59:42,258 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:42,259 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 18:59:42.259142 duration_in_ms=173.079
2018-11-10 18:59:42,263 [salt.state       :1780][INFO    ][3079] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 18:59:42.263092
2018-11-10 18:59:42,264 [salt.state       :1813][INFO    ][3079] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-11-10 18:59:42,600 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-11-10 18:59:42,924 [salt.state       :300 ][INFO    ][3079] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-11-10 18:59:42,925 [salt.state       :1951][INFO    ][3079] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 18:59:42.924949 duration_in_ms=661.853
2018-11-10 18:59:42,925 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 18:59:42.925352
2018-11-10 18:59:42,925 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-11-10 18:59:42,926 [salt.state       :300 ][INFO    ][3079] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-11-10 18:59:42,926 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 18:59:42.926529 duration_in_ms=1.177
2018-11-10 18:59:42,926 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/preferences.d/uca] at time 18:59:42.926778
2018-11-10 18:59:42,927 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-11-10 18:59:43,084 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:43,085 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/preferences.d/uca] at time 18:59:43.084997 duration_in_ms=158.219
2018-11-10 18:59:43,085 [salt.state       :1780][INFO    ][3079] Running state [echo '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' | base64 -d | apt-key add -] at time 18:59:43.085290
2018-11-10 18:59:43,085 [salt.state       :1813][INFO    ][3079] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-11-10 18:59:43,086 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-11-10 18:59:43,380 [salt.state       :300 ][INFO    ][3079] {'pid': 3325, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-11-10 18:59:43,381 [salt.state       :1951][INFO    ][3079] Completed state [echo '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' | base64 -d | apt-key add -] at time 18:59:43.381033 duration_in_ms=295.743
2018-11-10 18:59:43,388 [salt.state       :1780][INFO    ][3079] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 18:59:43.388054
2018-11-10 18:59:43,388 [salt.state       :1813][INFO    ][3079] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-11-10 18:59:43,620 [salt.state       :300 ][INFO    ][3079] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-11-10 18:59:43,621 [salt.state       :1951][INFO    ][3079] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 18:59:43.621115 duration_in_ms=233.06
2018-11-10 18:59:43,621 [salt.state       :1780][INFO    ][3079] Running state [pkg.refresh_db] at time 18:59:43.621413
2018-11-10 18:59:43,621 [salt.state       :1813][INFO    ][3079] Executing state module.run for [pkg.refresh_db]
2018-11-10 18:59:43,622 [salt.utils.decorators:613 ][WARNING ][3079] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-10 18:59:43,622 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 18:59:48,691 [salt.state       :300 ][INFO    ][3079] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': True, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-11-10 18:59:48,694 [salt.state       :1951][INFO    ][3079] Completed state [pkg.refresh_db] at time 18:59:48.694519 duration_in_ms=5073.105
2018-11-10 18:59:48,695 [salt.state       :1780][INFO    ][3079] Running state [linux_extra_packages_removed] at time 18:59:48.695061
2018-11-10 18:59:48,695 [salt.state       :1813][INFO    ][3079] Executing state pkg.removed for [linux_extra_packages_removed]
2018-11-10 18:59:48,726 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2018-11-10 18:59:50,683 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110185950664712
2018-11-10 18:59:50,711 [salt.minion      :1432][INFO    ][4028] Starting a new job with PID 4028
2018-11-10 18:59:50,736 [salt.minion      :1711][INFO    ][4028] Returning information for job: 20181110185950664712
2018-11-10 18:59:51,304 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 18:59:51,348 [salt.state       :300 ][INFO    ][3079] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2018-11-10 18:59:51,375 [salt.state       :915 ][INFO    ][3079] Loading fresh modules for state activity
2018-11-10 18:59:51,419 [salt.state       :1951][INFO    ][3079] Completed state [linux_extra_packages_removed] at time 18:59:51.419918 duration_in_ms=2724.857
2018-11-10 18:59:51,426 [salt.state       :1780][INFO    ][3079] Running state [linux_extra_packages_latest] at time 18:59:51.426428
2018-11-10 18:59:51,426 [salt.state       :1813][INFO    ][3079] Executing state pkg.latest for [linux_extra_packages_latest]
2018-11-10 18:59:52,368 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-11-10 18:59:52,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 18:59:52,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-11-10 18:59:56,423 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 18:59:56,479 [salt.state       :300 ][INFO    ][3079] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-11-10 18:59:56,515 [salt.state       :915 ][INFO    ][3079] Loading fresh modules for state activity
2018-11-10 18:59:56,572 [salt.state       :1951][INFO    ][3079] Completed state [linux_extra_packages_latest] at time 18:59:56.572357 duration_in_ms=5145.928
2018-11-10 18:59:56,579 [salt.state       :1780][INFO    ][3079] Running state [UTC] at time 18:59:56.579296
2018-11-10 18:59:56,579 [salt.state       :1813][INFO    ][3079] Executing state timezone.system for [UTC]
2018-11-10 18:59:56,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['timedatectl'] in directory '/root'
2018-11-10 18:59:56,762 [salt.state       :300 ][INFO    ][3079] Timezone UTC already set, UTC already set to UTC
2018-11-10 18:59:56,764 [salt.state       :1951][INFO    ][3079] Completed state [UTC] at time 18:59:56.763910 duration_in_ms=184.615
2018-11-10 18:59:56,768 [salt.state       :1780][INFO    ][3079] Running state [/etc/default/grub.d] at time 18:59:56.768347
2018-11-10 18:59:56,768 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/default/grub.d]
2018-11-10 18:59:56,776 [salt.state       :300 ][INFO    ][3079] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-11-10 18:59:56,777 [salt.state       :1951][INFO    ][3079] Completed state [/etc/default/grub.d] at time 18:59:56.777153 duration_in_ms=8.806
2018-11-10 18:59:56,778 [salt.state       :1780][INFO    ][3079] Running state [update-grub] at time 18:59:56.778243
2018-11-10 18:59:56,778 [salt.state       :1813][INFO    ][3079] Executing state cmd.wait for [update-grub]
2018-11-10 18:59:56,779 [salt.state       :300 ][INFO    ][3079] No changes made for update-grub
2018-11-10 18:59:56,779 [salt.state       :1951][INFO    ][3079] Completed state [update-grub] at time 18:59:56.779651 duration_in_ms=1.408
2018-11-10 18:59:56,783 [salt.state       :1780][INFO    ][3079] Running state [/boot/grub/grub.cfg] at time 18:59:56.783546
2018-11-10 18:59:56,784 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/boot/grub/grub.cfg]
2018-11-10 18:59:58,032 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-11-10 18:59:58,050 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 18:59:58,052 [salt.state       :300 ][INFO    ][3079] {'mode': '0400'}
2018-11-10 18:59:58,053 [salt.state       :1951][INFO    ][3079] Completed state [/boot/grub/grub.cfg] at time 18:59:58.053132 duration_in_ms=1269.585
2018-11-10 18:59:58,054 [salt.state       :1780][INFO    ][3079] Running state [nf_conntrack] at time 18:59:58.054146
2018-11-10 18:59:58,054 [salt.state       :1813][INFO    ][3079] Executing state kmod.present for [nf_conntrack]
2018-11-10 18:59:58,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'lsmod' in directory '/root'
2018-11-10 18:59:58,623 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'lsmod' in directory '/root'
2018-11-10 18:59:58,647 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-11-10 18:59:58,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'lsmod' in directory '/root'
2018-11-10 18:59:58,806 [salt.state       :300 ][INFO    ][3079] {'nf_conntrack': 'loaded'}
2018-11-10 18:59:58,807 [salt.state       :1951][INFO    ][3079] Completed state [nf_conntrack] at time 18:59:58.807100 duration_in_ms=752.954
2018-11-10 18:59:58,807 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d] at time 18:59:58.807509
2018-11-10 18:59:58,807 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/modprobe.d]
2018-11-10 18:59:58,809 [salt.state       :300 ][INFO    ][3079] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2018-11-10 18:59:58,809 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d] at time 18:59:58.809592 duration_in_ms=2.083
2018-11-10 18:59:58,812 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/hfsplus.conf] at time 18:59:58.812441
2018-11-10 18:59:58,812 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2018-11-10 18:59:58,838 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2018-11-10 18:59:59,022 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:59,023 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/hfsplus.conf] at time 18:59:59.023036 duration_in_ms=210.595
2018-11-10 18:59:59,025 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/rds.conf] at time 18:59:59.025375
2018-11-10 18:59:59,026 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2018-11-10 18:59:59,202 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:59,202 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/rds.conf] at time 18:59:59.202503 duration_in_ms=177.127
2018-11-10 18:59:59,204 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/cramfs.conf] at time 18:59:59.204849
2018-11-10 18:59:59,205 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2018-11-10 18:59:59,386 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:59,387 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/cramfs.conf] at time 18:59:59.387123 duration_in_ms=182.274
2018-11-10 18:59:59,390 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/freevxfs.conf] at time 18:59:59.390399
2018-11-10 18:59:59,390 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2018-11-10 18:59:59,564 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:59,564 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/freevxfs.conf] at time 18:59:59.564628 duration_in_ms=174.228
2018-11-10 18:59:59,567 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/hfs.conf] at time 18:59:59.567524
2018-11-10 18:59:59,567 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2018-11-10 18:59:59,978 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 18:59:59,978 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/hfs.conf] at time 18:59:59.978301 duration_in_ms=410.777
2018-11-10 18:59:59,980 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/squashfs.conf] at time 18:59:59.980140
2018-11-10 18:59:59,980 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2018-11-10 19:00:00,164 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:00,165 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/squashfs.conf] at time 19:00:00.165010 duration_in_ms=184.869
2018-11-10 19:00:00,166 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/udf.conf] at time 19:00:00.166635
2018-11-10 19:00:00,166 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2018-11-10 19:00:00,804 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190000790260
2018-11-10 19:00:00,831 [salt.minion      :1432][INFO    ][4288] Starting a new job with PID 4288
2018-11-10 19:00:00,867 [salt.minion      :1711][INFO    ][4288] Returning information for job: 20181110190000790260
2018-11-10 19:00:01,140 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:01,141 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/udf.conf] at time 19:00:01.140784 duration_in_ms=974.149
2018-11-10 19:00:01,143 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/vfat.conf] at time 19:00:01.143171
2018-11-10 19:00:01,143 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2018-11-10 19:00:01,350 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:01,351 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/vfat.conf] at time 19:00:01.351303 duration_in_ms=208.131
2018-11-10 19:00:01,353 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/sctp.conf] at time 19:00:01.353746
2018-11-10 19:00:01,354 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2018-11-10 19:00:01,524 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:01,525 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/sctp.conf] at time 19:00:01.525831 duration_in_ms=172.085
2018-11-10 19:00:01,527 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/jffs2.conf] at time 19:00:01.527610
2018-11-10 19:00:01,528 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2018-11-10 19:00:01,697 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:01,698 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/jffs2.conf] at time 19:00:01.698702 duration_in_ms=171.092
2018-11-10 19:00:01,700 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/tipc.conf] at time 19:00:01.700802
2018-11-10 19:00:01,701 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2018-11-10 19:00:01,869 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:01,870 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/tipc.conf] at time 19:00:01.870477 duration_in_ms=169.674
2018-11-10 19:00:01,872 [salt.state       :1780][INFO    ][3079] Running state [/etc/modprobe.d/dccp.conf] at time 19:00:01.872569
2018-11-10 19:00:01,873 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2018-11-10 19:00:02,044 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:02,045 [salt.state       :1951][INFO    ][3079] Completed state [/etc/modprobe.d/dccp.conf] at time 19:00:02.045251 duration_in_ms=172.681
2018-11-10 19:00:02,046 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_congestion_control] at time 19:00:02.046443
2018-11-10 19:00:02,046 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-11-10 19:00:02,048 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-11-10 19:00:02,075 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-11-10 19:00:02,075 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_congestion_control] at time 19:00:02.075892 duration_in_ms=29.448
2018-11-10 19:00:02,076 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_slow_start_after_idle] at time 19:00:02.076394
2018-11-10 19:00:02,076 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-11-10 19:00:02,078 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-11-10 19:00:02,100 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-11-10 19:00:02,101 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 19:00:02.101247 duration_in_ms=24.853
2018-11-10 19:00:02,101 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 19:00:02.101786
2018-11-10 19:00:02,102 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2018-11-10 19:00:02,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2018-11-10 19:00:02,128 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2018-11-10 19:00:02,128 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 19:00:02.128724 duration_in_ms=26.937
2018-11-10 19:00:02,129 [salt.state       :1780][INFO    ][3079] Running state [net.nf_conntrack_max] at time 19:00:02.129512
2018-11-10 19:00:02,130 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.nf_conntrack_max]
2018-11-10 19:00:02,132 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-11-10 19:00:02,153 [salt.state       :300 ][INFO    ][3079] {'net.nf_conntrack_max': 1048576}
2018-11-10 19:00:02,154 [salt.state       :1951][INFO    ][3079] Completed state [net.nf_conntrack_max] at time 19:00:02.154200 duration_in_ms=24.687
2018-11-10 19:00:02,154 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 19:00:02.154819
2018-11-10 19:00:02,155 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2018-11-10 19:00:02,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2018-11-10 19:00:02,178 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2018-11-10 19:00:02,179 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 19:00:02.179506 duration_in_ms=24.687
2018-11-10 19:00:02,180 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.default.log_martians] at time 19:00:02.180238
2018-11-10 19:00:02,180 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2018-11-10 19:00:02,183 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2018-11-10 19:00:02,205 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.default.log_martians': 1}
2018-11-10 19:00:02,206 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.default.log_martians] at time 19:00:02.206815 duration_in_ms=26.578
2018-11-10 19:00:02,207 [salt.state       :1780][INFO    ][3079] Running state [net.core.somaxconn] at time 19:00:02.207441
2018-11-10 19:00:02,208 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.core.somaxconn]
2018-11-10 19:00:02,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-11-10 19:00:02,232 [salt.state       :300 ][INFO    ][3079] {'net.core.somaxconn': 4096}
2018-11-10 19:00:02,232 [salt.state       :1951][INFO    ][3079] Completed state [net.core.somaxconn] at time 19:00:02.232875 duration_in_ms=25.433
2018-11-10 19:00:02,233 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.all.send_redirects] at time 19:00:02.233353
2018-11-10 19:00:02,234 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2018-11-10 19:00:02,235 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2018-11-10 19:00:02,255 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.all.send_redirects': 0}
2018-11-10 19:00:02,257 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.all.send_redirects] at time 19:00:02.256883 duration_in_ms=23.53
2018-11-10 19:00:02,258 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_tw_reuse] at time 19:00:02.258139
2018-11-10 19:00:02,258 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-11-10 19:00:02,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-11-10 19:00:02,279 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_tw_reuse': 1}
2018-11-10 19:00:02,280 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_tw_reuse] at time 19:00:02.280650 duration_in_ms=22.49
2018-11-10 19:00:02,281 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.default.rp_filter] at time 19:00:02.281810
2018-11-10 19:00:02,282 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2018-11-10 19:00:02,284 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2018-11-10 19:00:02,304 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.default.rp_filter': 1}
2018-11-10 19:00:02,305 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.default.rp_filter] at time 19:00:02.305205 duration_in_ms=23.394
2018-11-10 19:00:02,307 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_fin_timeout] at time 19:00:02.307352
2018-11-10 19:00:02,307 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-11-10 19:00:02,310 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-11-10 19:00:02,334 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_fin_timeout': 30}
2018-11-10 19:00:02,335 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_fin_timeout] at time 19:00:02.335238 duration_in_ms=27.886
2018-11-10 19:00:02,336 [salt.state       :1780][INFO    ][3079] Running state [kernel.panic] at time 19:00:02.335974
2018-11-10 19:00:02,336 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [kernel.panic]
2018-11-10 19:00:02,339 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-11-10 19:00:02,364 [salt.state       :300 ][INFO    ][3079] {'kernel.panic': 60}
2018-11-10 19:00:02,365 [salt.state       :1951][INFO    ][3079] Completed state [kernel.panic] at time 19:00:02.365137 duration_in_ms=29.163
2018-11-10 19:00:02,366 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_keepalive_probes] at time 19:00:02.366272
2018-11-10 19:00:02,366 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-11-10 19:00:02,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-11-10 19:00:02,457 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_keepalive_probes': 8}
2018-11-10 19:00:02,458 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_keepalive_probes] at time 19:00:02.458365 duration_in_ms=92.092
2018-11-10 19:00:02,459 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.all.log_martians] at time 19:00:02.459333
2018-11-10 19:00:02,459 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2018-11-10 19:00:02,508 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2018-11-10 19:00:02,534 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.all.log_martians': 1}
2018-11-10 19:00:02,535 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.all.log_martians] at time 19:00:02.535053 duration_in_ms=75.719
2018-11-10 19:00:02,535 [salt.state       :1780][INFO    ][3079] Running state [fs.suid_dumpable] at time 19:00:02.535723
2018-11-10 19:00:02,536 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [fs.suid_dumpable]
2018-11-10 19:00:02,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2018-11-10 19:00:02,605 [salt.state       :300 ][INFO    ][3079] {'fs.suid_dumpable': 0}
2018-11-10 19:00:02,606 [salt.state       :1951][INFO    ][3079] Completed state [fs.suid_dumpable] at time 19:00:02.606560 duration_in_ms=70.837
2018-11-10 19:00:02,607 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.default.accept_redirects] at time 19:00:02.607217
2018-11-10 19:00:02,607 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2018-11-10 19:00:02,646 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2018-11-10 19:00:02,667 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.default.accept_redirects': 0}
2018-11-10 19:00:02,668 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.default.accept_redirects] at time 19:00:02.668815 duration_in_ms=61.597
2018-11-10 19:00:02,670 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.default.secure_redirects] at time 19:00:02.670112
2018-11-10 19:00:02,670 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2018-11-10 19:00:02,695 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2018-11-10 19:00:02,719 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.default.secure_redirects': 0}
2018-11-10 19:00:02,720 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.default.secure_redirects] at time 19:00:02.720027 duration_in_ms=49.916
2018-11-10 19:00:02,720 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.default.accept_source_route] at time 19:00:02.720938
2018-11-10 19:00:02,723 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2018-11-10 19:00:02,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2018-11-10 19:00:02,818 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.default.accept_source_route': 0}
2018-11-10 19:00:02,819 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.default.accept_source_route] at time 19:00:02.818792 duration_in_ms=97.852
2018-11-10 19:00:02,820 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_keepalive_intvl] at time 19:00:02.820370
2018-11-10 19:00:02,821 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-11-10 19:00:02,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-11-10 19:00:02,849 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-11-10 19:00:02,849 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_keepalive_intvl] at time 19:00:02.849851 duration_in_ms=29.48
2018-11-10 19:00:02,850 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_keepalive_time] at time 19:00:02.850499
2018-11-10 19:00:02,851 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-11-10 19:00:02,853 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-11-10 19:00:02,876 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_keepalive_time': 30}
2018-11-10 19:00:02,878 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_keepalive_time] at time 19:00:02.877289 duration_in_ms=26.79
2018-11-10 19:00:02,878 [salt.state       :1780][INFO    ][3079] Running state [kernel.randomize_va_space] at time 19:00:02.878800
2018-11-10 19:00:02,879 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [kernel.randomize_va_space]
2018-11-10 19:00:02,882 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2018-11-10 19:00:02,907 [salt.state       :300 ][INFO    ][3079] {'kernel.randomize_va_space': 2}
2018-11-10 19:00:02,907 [salt.state       :1951][INFO    ][3079] Completed state [kernel.randomize_va_space] at time 19:00:02.907803 duration_in_ms=29.003
2018-11-10 19:00:02,908 [salt.state       :1780][INFO    ][3079] Running state [fs.file-max] at time 19:00:02.908483
2018-11-10 19:00:02,909 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [fs.file-max]
2018-11-10 19:00:02,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-11-10 19:00:02,938 [salt.state       :300 ][INFO    ][3079] {'fs.file-max': 124165}
2018-11-10 19:00:02,938 [salt.state       :1951][INFO    ][3079] Completed state [fs.file-max] at time 19:00:02.938872 duration_in_ms=30.39
2018-11-10 19:00:02,939 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_syncookies] at time 19:00:02.939331
2018-11-10 19:00:02,939 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2018-11-10 19:00:02,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2018-11-10 19:00:02,963 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_syncookies': 1}
2018-11-10 19:00:02,964 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_syncookies] at time 19:00:02.964162 duration_in_ms=24.83
2018-11-10 19:00:02,964 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_max_syn_backlog] at time 19:00:02.964858
2018-11-10 19:00:02,966 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-11-10 19:00:02,968 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-11-10 19:00:02,992 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-11-10 19:00:02,993 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_max_syn_backlog] at time 19:00:02.992985 duration_in_ms=28.126
2018-11-10 19:00:02,994 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.all.rp_filter] at time 19:00:02.993967
2018-11-10 19:00:02,994 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2018-11-10 19:00:02,996 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2018-11-10 19:00:03,016 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.all.rp_filter': 1}
2018-11-10 19:00:03,016 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.all.rp_filter] at time 19:00:03.016806 duration_in_ms=22.839
2018-11-10 19:00:03,017 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.all.accept_source_route] at time 19:00:03.017257
2018-11-10 19:00:03,017 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2018-11-10 19:00:03,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2018-11-10 19:00:03,042 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.all.accept_source_route': 0}
2018-11-10 19:00:03,043 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.all.accept_source_route] at time 19:00:03.043022 duration_in_ms=25.764
2018-11-10 19:00:03,043 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.tcp_retries2] at time 19:00:03.043529
2018-11-10 19:00:03,043 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-11-10 19:00:03,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-11-10 19:00:03,064 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.tcp_retries2': 5}
2018-11-10 19:00:03,065 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.tcp_retries2] at time 19:00:03.065070 duration_in_ms=21.541
2018-11-10 19:00:03,067 [salt.state       :1780][INFO    ][3079] Running state [net.core.netdev_max_backlog] at time 19:00:03.067454
2018-11-10 19:00:03,067 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-11-10 19:00:03,072 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-11-10 19:00:03,094 [salt.state       :300 ][INFO    ][3079] {'net.core.netdev_max_backlog': 261144}
2018-11-10 19:00:03,095 [salt.state       :1951][INFO    ][3079] Completed state [net.core.netdev_max_backlog] at time 19:00:03.095288 duration_in_ms=27.834
2018-11-10 19:00:03,095 [salt.state       :1780][INFO    ][3079] Running state [vm.swappiness] at time 19:00:03.095733
2018-11-10 19:00:03,096 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [vm.swappiness]
2018-11-10 19:00:03,097 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-11-10 19:00:03,116 [salt.state       :300 ][INFO    ][3079] {'vm.swappiness': 10}
2018-11-10 19:00:03,117 [salt.state       :1951][INFO    ][3079] Completed state [vm.swappiness] at time 19:00:03.116951 duration_in_ms=21.217
2018-11-10 19:00:03,118 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.all.secure_redirects] at time 19:00:03.117988
2018-11-10 19:00:03,118 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2018-11-10 19:00:03,120 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2018-11-10 19:00:03,141 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.all.secure_redirects': 0}
2018-11-10 19:00:03,142 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.all.secure_redirects] at time 19:00:03.142513 duration_in_ms=25.117
2018-11-10 19:00:03,143 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.neigh.default.gc_thresh1] at time 19:00:03.143283
2018-11-10 19:00:03,143 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-11-10 19:00:03,146 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-11-10 19:00:03,167 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-11-10 19:00:03,168 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 19:00:03.168435 duration_in_ms=25.151
2018-11-10 19:00:03,169 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.neigh.default.gc_thresh2] at time 19:00:03.168983
2018-11-10 19:00:03,169 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-11-10 19:00:03,171 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-11-10 19:00:03,194 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-11-10 19:00:03,195 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 19:00:03.195506 duration_in_ms=26.523
2018-11-10 19:00:03,196 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.neigh.default.gc_thresh3] at time 19:00:03.196089
2018-11-10 19:00:03,196 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-11-10 19:00:03,198 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-11-10 19:00:03,219 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-11-10 19:00:03,220 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 19:00:03.220401 duration_in_ms=24.311
2018-11-10 19:00:03,221 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.default.send_redirects] at time 19:00:03.221209
2018-11-10 19:00:03,223 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2018-11-10 19:00:03,225 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2018-11-10 19:00:03,248 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.default.send_redirects': 0}
2018-11-10 19:00:03,249 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.default.send_redirects] at time 19:00:03.249208 duration_in_ms=27.998
2018-11-10 19:00:03,251 [salt.state       :1780][INFO    ][3079] Running state [net.ipv4.conf.all.accept_redirects] at time 19:00:03.250660
2018-11-10 19:00:03,251 [salt.state       :1813][INFO    ][3079] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2018-11-10 19:00:03,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2018-11-10 19:00:03,271 [salt.state       :300 ][INFO    ][3079] {'net.ipv4.conf.all.accept_redirects': 0}
2018-11-10 19:00:03,272 [salt.state       :1951][INFO    ][3079] Completed state [net.ipv4.conf.all.accept_redirects] at time 19:00:03.272531 duration_in_ms=21.871
2018-11-10 19:00:03,273 [salt.state       :1780][INFO    ][3079] Running state [linux_sysfs_package] at time 19:00:03.273035
2018-11-10 19:00:03,273 [salt.state       :1813][INFO    ][3079] Executing state pkg.installed for [linux_sysfs_package]
2018-11-10 19:00:03,312 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-11-10 19:00:03,490 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:00:08,566 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:00:08,598 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-11-10 19:00:10,947 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190010927515
2018-11-10 19:00:10,972 [salt.minion      :1432][INFO    ][5004] Starting a new job with PID 5004
2018-11-10 19:00:11,001 [salt.minion      :1711][INFO    ][5004] Returning information for job: 20181110190010927515
2018-11-10 19:00:13,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:00:13,721 [salt.state       :300 ][INFO    ][3079] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-11-10 19:00:13,746 [salt.state       :915 ][INFO    ][3079] Loading fresh modules for state activity
2018-11-10 19:00:13,797 [salt.state       :1951][INFO    ][3079] Completed state [linux_sysfs_package] at time 19:00:13.797440 duration_in_ms=10524.404
2018-11-10 19:00:13,809 [salt.state       :1780][INFO    ][3079] Running state [/etc/sysfs.d] at time 19:00:13.809329
2018-11-10 19:00:13,809 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/etc/sysfs.d]
2018-11-10 19:00:13,818 [salt.state       :300 ][INFO    ][3079] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-11-10 19:00:13,818 [salt.state       :1951][INFO    ][3079] Completed state [/etc/sysfs.d] at time 19:00:13.818667 duration_in_ms=9.339
2018-11-10 19:00:13,821 [salt.state       :1780][INFO    ][3079] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 19:00:13.821729
2018-11-10 19:00:13,822 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2018-11-10 19:00:13,851 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/sysfs.conf'
2018-11-10 19:00:13,873 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:13,875 [salt.state       :1951][INFO    ][3079] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 19:00:13.875318 duration_in_ms=53.59
2018-11-10 19:00:13,876 [salt.state       :1780][INFO    ][3079] Running state [sysfs.write] at time 19:00:13.876400
2018-11-10 19:00:13,877 [salt.state       :1813][INFO    ][3079] Executing state module.run for [sysfs.write]
2018-11-10 19:00:13,877 [salt.utils.decorators:613 ][WARNING ][3079] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-10 19:00:13,880 [salt.state       :300 ][INFO    ][3079] {'ret': True}
2018-11-10 19:00:13,881 [salt.state       :1951][INFO    ][3079] Completed state [sysfs.write] at time 19:00:13.881092 duration_in_ms=4.692
2018-11-10 19:00:14,561 [salt.state       :1780][INFO    ][3079] Running state [ondemand] at time 19:00:14.561501
2018-11-10 19:00:14,562 [salt.state       :1813][INFO    ][3079] Executing state service.dead for [ondemand]
2018-11-10 19:00:14,563 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-11-10 19:00:14,586 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-10 19:00:14,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-10 19:00:14,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-11-10 19:00:14,710 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-10 19:00:14,736 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-10 19:00:14,759 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-10 19:00:14,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-11-10 19:00:14,989 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-10 19:00:15,026 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'runlevel' in directory '/root'
2018-11-10 19:00:15,049 [salt.state       :300 ][INFO    ][3079] {'ondemand': True}
2018-11-10 19:00:15,050 [salt.state       :1951][INFO    ][3079] Completed state [ondemand] at time 19:00:15.049926 duration_in_ms=488.425
2018-11-10 19:00:15,051 [salt.state       :1780][INFO    ][3079] Running state [en_US.UTF-8] at time 19:00:15.051856
2018-11-10 19:00:15,052 [salt.state       :1813][INFO    ][3079] Executing state locale.present for [en_US.UTF-8]
2018-11-10 19:00:15,053 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'locale -a' in directory '/root'
2018-11-10 19:00:15,073 [salt.state       :300 ][INFO    ][3079] Locale en_US.UTF-8 is already present
2018-11-10 19:00:15,074 [salt.state       :1951][INFO    ][3079] Completed state [en_US.UTF-8] at time 19:00:15.074356 duration_in_ms=22.5
2018-11-10 19:00:15,079 [salt.state       :1780][INFO    ][3079] Running state [en_US.UTF-8] at time 19:00:15.079949
2018-11-10 19:00:15,080 [salt.state       :1813][INFO    ][3079] Executing state locale.system for [en_US.UTF-8]
2018-11-10 19:00:15,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'localectl' in directory '/root'
2018-11-10 19:00:15,152 [salt.state       :300 ][INFO    ][3079] System locale en_US.UTF-8 already set
2018-11-10 19:00:15,153 [salt.state       :1951][INFO    ][3079] Completed state [en_US.UTF-8] at time 19:00:15.153421 duration_in_ms=73.471
2018-11-10 19:00:15,156 [salt.state       :1780][INFO    ][3079] Running state [root] at time 19:00:15.155973
2018-11-10 19:00:15,156 [salt.state       :1813][INFO    ][3079] Executing state group.present for [root]
2018-11-10 19:00:15,157 [salt.state       :300 ][INFO    ][3079] Group root is present and up to date
2018-11-10 19:00:15,159 [salt.state       :1951][INFO    ][3079] Completed state [root] at time 19:00:15.159114 duration_in_ms=3.141
2018-11-10 19:00:15,164 [salt.state       :1780][INFO    ][3079] Running state [root] at time 19:00:15.164010
2018-11-10 19:00:15,164 [salt.state       :1813][INFO    ][3079] Executing state user.present for [root]
2018-11-10 19:00:15,171 [salt.state       :300 ][INFO    ][3079] User root is present and up to date
2018-11-10 19:00:15,172 [salt.state       :1951][INFO    ][3079] Completed state [root] at time 19:00:15.172180 duration_in_ms=8.17
2018-11-10 19:00:15,174 [salt.state       :1780][INFO    ][3079] Running state [/root] at time 19:00:15.174597
2018-11-10 19:00:15,175 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/root]
2018-11-10 19:00:15,176 [salt.state       :300 ][INFO    ][3079] Directory /root is in the correct state
Directory /root updated
2018-11-10 19:00:15,176 [salt.state       :1951][INFO    ][3079] Completed state [/root] at time 19:00:15.176845 duration_in_ms=2.248
2018-11-10 19:00:15,177 [salt.state       :1780][INFO    ][3079] Running state [/etc/sudoers.d/90-salt-user-root] at time 19:00:15.177293
2018-11-10 19:00:15,179 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-11-10 19:00:15,179 [salt.state       :300 ][INFO    ][3079] File /etc/sudoers.d/90-salt-user-root is not present
2018-11-10 19:00:15,180 [salt.state       :1951][INFO    ][3079] Completed state [/etc/sudoers.d/90-salt-user-root] at time 19:00:15.180374 duration_in_ms=3.08
2018-11-10 19:00:15,181 [salt.state       :1780][INFO    ][3079] Running state [ubuntu] at time 19:00:15.181122
2018-11-10 19:00:15,181 [salt.state       :1813][INFO    ][3079] Executing state group.present for [ubuntu]
2018-11-10 19:00:15,182 [salt.state       :300 ][INFO    ][3079] Group ubuntu is present and up to date
2018-11-10 19:00:15,182 [salt.state       :1951][INFO    ][3079] Completed state [ubuntu] at time 19:00:15.182542 duration_in_ms=1.42
2018-11-10 19:00:15,184 [salt.state       :1780][INFO    ][3079] Running state [ubuntu] at time 19:00:15.184294
2018-11-10 19:00:15,184 [salt.state       :1813][INFO    ][3079] Executing state user.present for [ubuntu]
2018-11-10 19:00:15,190 [salt.state       :300 ][INFO    ][3079] {'passwd': 'XXX-REDACTED-XXX'}
2018-11-10 19:00:15,191 [salt.state       :1951][INFO    ][3079] Completed state [ubuntu] at time 19:00:15.191034 duration_in_ms=6.74
2018-11-10 19:00:15,194 [salt.state       :1780][INFO    ][3079] Running state [/home/ubuntu] at time 19:00:15.193982
2018-11-10 19:00:15,194 [salt.state       :1813][INFO    ][3079] Executing state file.directory for [/home/ubuntu]
2018-11-10 19:00:15,196 [salt.state       :300 ][INFO    ][3079] {'mode': '0700'}
2018-11-10 19:00:15,196 [salt.state       :1951][INFO    ][3079] Completed state [/home/ubuntu] at time 19:00:15.196581 duration_in_ms=2.599
2018-11-10 19:00:15,199 [salt.state       :1780][INFO    ][3079] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 19:00:15.199692
2018-11-10 19:00:15,200 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-11-10 19:00:15,417 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-11-10 19:00:15,440 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.XpFhDP' in directory '/root'
2018-11-10 19:00:15,479 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:15,479 [salt.state       :1951][INFO    ][3079] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 19:00:15.479673 duration_in_ms=279.98
2018-11-10 19:00:15,480 [salt.state       :1780][INFO    ][3079] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 19:00:15.480085
2018-11-10 19:00:15,480 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2018-11-10 19:00:15,503 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-11-10 19:00:15,661 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:15,661 [salt.state       :1951][INFO    ][3079] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 19:00:15.661620 duration_in_ms=181.533
2018-11-10 19:00:15,661 [salt.state       :1780][INFO    ][3079] Running state [/etc/security/limits.d/90-salt-default.conf] at time 19:00:15.661893
2018-11-10 19:00:15,662 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-11-10 19:00:15,842 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:15,842 [salt.state       :1951][INFO    ][3079] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 19:00:15.842815 duration_in_ms=180.922
2018-11-10 19:00:15,843 [salt.state       :1780][INFO    ][3079] Running state [apt-daily.timer] at time 19:00:15.843094
2018-11-10 19:00:15,843 [salt.state       :1813][INFO    ][3079] Executing state service.dead for [apt-daily.timer]
2018-11-10 19:00:15,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2018-11-10 19:00:15,879 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:15,901 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:15,925 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:15,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:15,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:16,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:16,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:16,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:00:16,269 [salt.state       :300 ][INFO    ][3079] {'apt-daily.timer': True}
2018-11-10 19:00:16,270 [salt.state       :1951][INFO    ][3079] Completed state [apt-daily.timer] at time 19:00:16.269927 duration_in_ms=426.832
2018-11-10 19:00:16,272 [salt.state       :1780][INFO    ][3079] Running state [autofs] at time 19:00:16.272081
2018-11-10 19:00:16,273 [salt.state       :1813][INFO    ][3079] Executing state service.disabled for [autofs]
2018-11-10 19:00:16,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2018-11-10 19:00:16,300 [salt.state       :300 ][INFO    ][3079] The named service autofs is not available
2018-11-10 19:00:16,301 [salt.state       :1951][INFO    ][3079] Completed state [autofs] at time 19:00:16.301447 duration_in_ms=29.365
2018-11-10 19:00:16,303 [salt.state       :1780][INFO    ][3079] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 19:00:16.303539
2018-11-10 19:00:16,304 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-11-10 19:00:16,323 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-11-10 19:00:16,484 [salt.state       :300 ][INFO    ][3079] File changed:
New file
2018-11-10 19:00:16,485 [salt.state       :1951][INFO    ][3079] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 19:00:16.485550 duration_in_ms=182.011
2018-11-10 19:00:16,488 [salt.state       :1780][INFO    ][3079] Running state [service.systemctl_reload] at time 19:00:16.488431
2018-11-10 19:00:16,488 [salt.state       :1813][INFO    ][3079] Executing state module.wait for [service.systemctl_reload]
2018-11-10 19:00:16,489 [salt.state       :300 ][INFO    ][3079] No changes made for service.systemctl_reload
2018-11-10 19:00:16,489 [salt.state       :1951][INFO    ][3079] Completed state [service.systemctl_reload] at time 19:00:16.489272 duration_in_ms=0.842
2018-11-10 19:00:16,489 [salt.state       :1780][INFO    ][3079] Running state [service.systemctl_reload] at time 19:00:16.489491
2018-11-10 19:00:16,489 [salt.state       :1813][INFO    ][3079] Executing state module.mod_watch for [service.systemctl_reload]
2018-11-10 19:00:16,490 [salt.utils.decorators:613 ][WARNING ][3079] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-10 19:00:16,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-11-10 19:00:16,679 [salt.state       :300 ][INFO    ][3079] {'ret': True}
2018-11-10 19:00:16,679 [salt.state       :1951][INFO    ][3079] Completed state [service.systemctl_reload] at time 19:00:16.679823 duration_in_ms=190.331
2018-11-10 19:00:16,680 [salt.state       :1780][INFO    ][3079] Running state [/etc/shadow] at time 19:00:16.680664
2018-11-10 19:00:16,681 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/shadow]
2018-11-10 19:00:16,681 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,683 [salt.state       :300 ][INFO    ][3079] File /etc/shadow exists with proper permissions. No changes made.
2018-11-10 19:00:16,684 [salt.state       :1951][INFO    ][3079] Completed state [/etc/shadow] at time 19:00:16.684031 duration_in_ms=3.367
2018-11-10 19:00:16,684 [salt.state       :1780][INFO    ][3079] Running state [/etc/gshadow] at time 19:00:16.684302
2018-11-10 19:00:16,694 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/gshadow]
2018-11-10 19:00:16,694 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,695 [salt.state       :300 ][INFO    ][3079] File /etc/gshadow exists with proper permissions. No changes made.
2018-11-10 19:00:16,695 [salt.state       :1951][INFO    ][3079] Completed state [/etc/gshadow] at time 19:00:16.695801 duration_in_ms=11.499
2018-11-10 19:00:16,696 [salt.state       :1780][INFO    ][3079] Running state [/etc/group-] at time 19:00:16.696327
2018-11-10 19:00:16,696 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/group-]
2018-11-10 19:00:16,696 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,697 [salt.state       :300 ][INFO    ][3079] File /etc/group- exists with proper permissions. No changes made.
2018-11-10 19:00:16,698 [salt.state       :1951][INFO    ][3079] Completed state [/etc/group-] at time 19:00:16.698148 duration_in_ms=1.821
2018-11-10 19:00:16,698 [salt.state       :1780][INFO    ][3079] Running state [/etc/shadow-] at time 19:00:16.698392
2018-11-10 19:00:16,698 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/shadow-]
2018-11-10 19:00:16,699 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,699 [salt.state       :300 ][INFO    ][3079] File /etc/shadow- exists with proper permissions. No changes made.
2018-11-10 19:00:16,699 [salt.state       :1951][INFO    ][3079] Completed state [/etc/shadow-] at time 19:00:16.699851 duration_in_ms=1.458
2018-11-10 19:00:16,700 [salt.state       :1780][INFO    ][3079] Running state [/etc/passwd-] at time 19:00:16.700366
2018-11-10 19:00:16,700 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/passwd-]
2018-11-10 19:00:16,701 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,701 [salt.state       :300 ][INFO    ][3079] File /etc/passwd- exists with proper permissions. No changes made.
2018-11-10 19:00:16,703 [salt.state       :1951][INFO    ][3079] Completed state [/etc/passwd-] at time 19:00:16.703226 duration_in_ms=2.86
2018-11-10 19:00:16,703 [salt.state       :1780][INFO    ][3079] Running state [/etc/passwd] at time 19:00:16.703743
2018-11-10 19:00:16,704 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/passwd]
2018-11-10 19:00:16,704 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,705 [salt.state       :300 ][INFO    ][3079] File /etc/passwd exists with proper permissions. No changes made.
2018-11-10 19:00:16,705 [salt.state       :1951][INFO    ][3079] Completed state [/etc/passwd] at time 19:00:16.705439 duration_in_ms=1.697
2018-11-10 19:00:16,705 [salt.state       :1780][INFO    ][3079] Running state [/etc/gshadow-] at time 19:00:16.705667
2018-11-10 19:00:16,705 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/gshadow-]
2018-11-10 19:00:16,706 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,707 [salt.state       :300 ][INFO    ][3079] File /etc/gshadow- exists with proper permissions. No changes made.
2018-11-10 19:00:16,707 [salt.state       :1951][INFO    ][3079] Completed state [/etc/gshadow-] at time 19:00:16.707380 duration_in_ms=1.713
2018-11-10 19:00:16,707 [salt.state       :1780][INFO    ][3079] Running state [/etc/group] at time 19:00:16.707607
2018-11-10 19:00:16,707 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/group]
2018-11-10 19:00:16,708 [salt.loaded.int.states.file:2298][WARNING ][3079] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:00:16,708 [salt.state       :300 ][INFO    ][3079] File /etc/group exists with proper permissions. No changes made.
2018-11-10 19:00:16,709 [salt.state       :1951][INFO    ][3079] Completed state [/etc/group] at time 19:00:16.709049 duration_in_ms=1.442
2018-11-10 19:00:16,709 [salt.state       :1780][INFO    ][3079] Running state [/etc/issue] at time 19:00:16.709315
2018-11-10 19:00:16,709 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/issue]
2018-11-10 19:00:16,811 [salt.state       :300 ][INFO    ][3079] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-11-10 19:00:16,811 [salt.state       :1951][INFO    ][3079] Completed state [/etc/issue] at time 19:00:16.811415 duration_in_ms=102.098
2018-11-10 19:00:16,811 [salt.state       :1780][INFO    ][3079] Running state [/etc/hostname] at time 19:00:16.811745
2018-11-10 19:00:16,812 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/hostname]
2018-11-10 19:00:16,842 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-11-10 19:00:16,861 [salt.state       :300 ][INFO    ][3079] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb03

2018-11-10 19:00:16,863 [salt.state       :1951][INFO    ][3079] Completed state [/etc/hostname] at time 19:00:16.863284 duration_in_ms=51.539
2018-11-10 19:00:16,867 [salt.state       :1780][INFO    ][3079] Running state [hostname mdb03] at time 19:00:16.867167
2018-11-10 19:00:16,867 [salt.state       :1813][INFO    ][3079] Executing state cmd.run for [hostname mdb03]
2018-11-10 19:00:16,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'test "$(hostname)" = "mdb03"' in directory '/root'
2018-11-10 19:00:16,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'hostname mdb03' in directory '/root'
2018-11-10 19:00:16,914 [salt.state       :300 ][INFO    ][3079] {'pid': 5361, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-11-10 19:00:16,916 [salt.state       :1951][INFO    ][3079] Completed state [hostname mdb03] at time 19:00:16.915956 duration_in_ms=48.789
2018-11-10 19:00:16,917 [salt.state       :1780][INFO    ][3079] Running state [mdb02] at time 19:00:16.917912
2018-11-10 19:00:16,918 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb02]
2018-11-10 19:00:16,920 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb02'}
2018-11-10 19:00:16,920 [salt.state       :1951][INFO    ][3079] Completed state [mdb02] at time 19:00:16.920740 duration_in_ms=2.828
2018-11-10 19:00:16,921 [salt.state       :1780][INFO    ][3079] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 19:00:16.921440
2018-11-10 19:00:16,921 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,924 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,924 [salt.state       :1951][INFO    ][3079] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 19:00:16.924836 duration_in_ms=3.396
2018-11-10 19:00:16,925 [salt.state       :1780][INFO    ][3079] Running state [mdb03] at time 19:00:16.925521
2018-11-10 19:00:16,925 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb03]
2018-11-10 19:00:16,927 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb03'}
2018-11-10 19:00:16,927 [salt.state       :1951][INFO    ][3079] Completed state [mdb03] at time 19:00:16.927762 duration_in_ms=2.24
2018-11-10 19:00:16,928 [salt.state       :1780][INFO    ][3079] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 19:00:16.928142
2018-11-10 19:00:16,928 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,929 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,929 [salt.state       :1951][INFO    ][3079] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 19:00:16.929816 duration_in_ms=1.674
2018-11-10 19:00:16,930 [salt.state       :1780][INFO    ][3079] Running state [mdb01] at time 19:00:16.930766
2018-11-10 19:00:16,931 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb01]
2018-11-10 19:00:16,932 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb01'}
2018-11-10 19:00:16,932 [salt.state       :1951][INFO    ][3079] Completed state [mdb01] at time 19:00:16.932392 duration_in_ms=1.626
2018-11-10 19:00:16,932 [salt.state       :1780][INFO    ][3079] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 19:00:16.932804
2018-11-10 19:00:16,933 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,934 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,935 [salt.state       :1951][INFO    ][3079] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 19:00:16.935079 duration_in_ms=2.274
2018-11-10 19:00:16,935 [salt.state       :1780][INFO    ][3079] Running state [mdb] at time 19:00:16.935735
2018-11-10 19:00:16,936 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb]
2018-11-10 19:00:16,941 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb'}
2018-11-10 19:00:16,941 [salt.state       :1951][INFO    ][3079] Completed state [mdb] at time 19:00:16.941348 duration_in_ms=5.613
2018-11-10 19:00:16,941 [salt.state       :1780][INFO    ][3079] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 19:00:16.941732
2018-11-10 19:00:16,942 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,943 [salt.state       :300 ][INFO    ][3079] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,943 [salt.state       :1951][INFO    ][3079] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 19:00:16.943461 duration_in_ms=1.729
2018-11-10 19:00:16,943 [salt.state       :1780][INFO    ][3079] Running state [cfg01] at time 19:00:16.943847
2018-11-10 19:00:16,944 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cfg01]
2018-11-10 19:00:16,945 [salt.state       :300 ][INFO    ][3079] {'host': 'cfg01'}
2018-11-10 19:00:16,946 [salt.state       :1951][INFO    ][3079] Completed state [cfg01] at time 19:00:16.946435 duration_in_ms=2.588
2018-11-10 19:00:16,947 [salt.state       :1780][INFO    ][3079] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:00:16.947093
2018-11-10 19:00:16,947 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,949 [salt.state       :300 ][INFO    ][3079] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,949 [salt.state       :1951][INFO    ][3079] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:00:16.949431 duration_in_ms=2.338
2018-11-10 19:00:16,949 [salt.state       :1780][INFO    ][3079] Running state [prx01] at time 19:00:16.949810
2018-11-10 19:00:16,950 [salt.state       :1813][INFO    ][3079] Executing state host.present for [prx01]
2018-11-10 19:00:16,951 [salt.state       :300 ][INFO    ][3079] {'host': 'prx01'}
2018-11-10 19:00:16,952 [salt.state       :1951][INFO    ][3079] Completed state [prx01] at time 19:00:16.952082 duration_in_ms=2.272
2018-11-10 19:00:16,952 [salt.state       :1780][INFO    ][3079] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 19:00:16.952459
2018-11-10 19:00:16,952 [salt.state       :1813][INFO    ][3079] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,954 [salt.state       :300 ][INFO    ][3079] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,955 [salt.state       :1951][INFO    ][3079] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 19:00:16.955044 duration_in_ms=2.585
2018-11-10 19:00:16,955 [salt.state       :1780][INFO    ][3079] Running state [kvm01] at time 19:00:16.955700
2018-11-10 19:00:16,955 [salt.state       :1813][INFO    ][3079] Executing state host.present for [kvm01]
2018-11-10 19:00:16,956 [salt.state       :300 ][INFO    ][3079] {'host': 'kvm01'}
2018-11-10 19:00:16,957 [salt.state       :1951][INFO    ][3079] Completed state [kvm01] at time 19:00:16.957447 duration_in_ms=1.747
2018-11-10 19:00:16,957 [salt.state       :1780][INFO    ][3079] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 19:00:16.957829
2018-11-10 19:00:16,958 [salt.state       :1813][INFO    ][3079] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,959 [salt.state       :300 ][INFO    ][3079] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,959 [salt.state       :1951][INFO    ][3079] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 19:00:16.959271 duration_in_ms=1.442
2018-11-10 19:00:16,959 [salt.state       :1780][INFO    ][3079] Running state [kvm03] at time 19:00:16.959940
2018-11-10 19:00:16,960 [salt.state       :1813][INFO    ][3079] Executing state host.present for [kvm03]
2018-11-10 19:00:16,961 [salt.state       :300 ][INFO    ][3079] {'host': 'kvm03'}
2018-11-10 19:00:16,962 [salt.state       :1951][INFO    ][3079] Completed state [kvm03] at time 19:00:16.961958 duration_in_ms=2.018
2018-11-10 19:00:16,964 [salt.state       :1780][INFO    ][3079] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 19:00:16.964003
2018-11-10 19:00:16,964 [salt.state       :1813][INFO    ][3079] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,965 [salt.state       :300 ][INFO    ][3079] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,965 [salt.state       :1951][INFO    ][3079] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 19:00:16.965765 duration_in_ms=1.762
2018-11-10 19:00:16,966 [salt.state       :1780][INFO    ][3079] Running state [kvm02] at time 19:00:16.966444
2018-11-10 19:00:16,966 [salt.state       :1813][INFO    ][3079] Executing state host.present for [kvm02]
2018-11-10 19:00:16,967 [salt.state       :300 ][INFO    ][3079] {'host': 'kvm02'}
2018-11-10 19:00:16,967 [salt.state       :1951][INFO    ][3079] Completed state [kvm02] at time 19:00:16.967883 duration_in_ms=1.439
2018-11-10 19:00:16,968 [salt.state       :1780][INFO    ][3079] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 19:00:16.968264
2018-11-10 19:00:16,968 [salt.state       :1813][INFO    ][3079] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,969 [salt.state       :300 ][INFO    ][3079] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,970 [salt.state       :1951][INFO    ][3079] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 19:00:16.970086 duration_in_ms=1.822
2018-11-10 19:00:16,970 [salt.state       :1780][INFO    ][3079] Running state [dbs] at time 19:00:16.970767
2018-11-10 19:00:16,971 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs]
2018-11-10 19:00:16,972 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs'}
2018-11-10 19:00:16,972 [salt.state       :1951][INFO    ][3079] Completed state [dbs] at time 19:00:16.972573 duration_in_ms=1.806
2018-11-10 19:00:16,973 [salt.state       :1780][INFO    ][3079] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 19:00:16.973291
2018-11-10 19:00:16,973 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,974 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,975 [salt.state       :1951][INFO    ][3079] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 19:00:16.975080 duration_in_ms=1.79
2018-11-10 19:00:16,975 [salt.state       :1780][INFO    ][3079] Running state [prx] at time 19:00:16.975472
2018-11-10 19:00:16,975 [salt.state       :1813][INFO    ][3079] Executing state host.present for [prx]
2018-11-10 19:00:16,977 [salt.state       :300 ][INFO    ][3079] {'host': 'prx'}
2018-11-10 19:00:16,977 [salt.state       :1951][INFO    ][3079] Completed state [prx] at time 19:00:16.977773 duration_in_ms=2.301
2018-11-10 19:00:16,979 [salt.state       :1780][INFO    ][3079] Running state [prx.mcp-ovs-dpdk-ha.local] at time 19:00:16.979018
2018-11-10 19:00:16,979 [salt.state       :1813][INFO    ][3079] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,980 [salt.state       :300 ][INFO    ][3079] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,980 [salt.state       :1951][INFO    ][3079] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 19:00:16.980688 duration_in_ms=1.67
2018-11-10 19:00:16,981 [salt.state       :1780][INFO    ][3079] Running state [prx02] at time 19:00:16.981077
2018-11-10 19:00:16,981 [salt.state       :1813][INFO    ][3079] Executing state host.present for [prx02]
2018-11-10 19:00:16,982 [salt.state       :300 ][INFO    ][3079] {'host': 'prx02'}
2018-11-10 19:00:16,983 [salt.state       :1951][INFO    ][3079] Completed state [prx02] at time 19:00:16.983124 duration_in_ms=2.047
2018-11-10 19:00:16,983 [salt.state       :1780][INFO    ][3079] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 19:00:16.983782
2018-11-10 19:00:16,984 [salt.state       :1813][INFO    ][3079] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,985 [salt.state       :300 ][INFO    ][3079] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,985 [salt.state       :1951][INFO    ][3079] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 19:00:16.985301 duration_in_ms=1.519
2018-11-10 19:00:16,985 [salt.state       :1780][INFO    ][3079] Running state [msg02] at time 19:00:16.985698
2018-11-10 19:00:16,985 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg02]
2018-11-10 19:00:16,987 [salt.state       :300 ][INFO    ][3079] {'host': 'msg02'}
2018-11-10 19:00:16,987 [salt.state       :1951][INFO    ][3079] Completed state [msg02] at time 19:00:16.987456 duration_in_ms=1.758
2018-11-10 19:00:16,987 [salt.state       :1780][INFO    ][3079] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 19:00:16.987848
2018-11-10 19:00:16,988 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,989 [salt.state       :300 ][INFO    ][3079] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,989 [salt.state       :1951][INFO    ][3079] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 19:00:16.989381 duration_in_ms=1.533
2018-11-10 19:00:16,989 [salt.state       :1780][INFO    ][3079] Running state [msg03] at time 19:00:16.989783
2018-11-10 19:00:16,990 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg03]
2018-11-10 19:00:16,992 [salt.state       :300 ][INFO    ][3079] {'host': 'msg03'}
2018-11-10 19:00:16,992 [salt.state       :1951][INFO    ][3079] Completed state [msg03] at time 19:00:16.992724 duration_in_ms=2.941
2018-11-10 19:00:16,993 [salt.state       :1780][INFO    ][3079] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 19:00:16.993411
2018-11-10 19:00:16,993 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,995 [salt.state       :300 ][INFO    ][3079] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,995 [salt.state       :1951][INFO    ][3079] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 19:00:16.995776 duration_in_ms=2.365
2018-11-10 19:00:16,996 [salt.state       :1780][INFO    ][3079] Running state [msg01] at time 19:00:16.996175
2018-11-10 19:00:16,996 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg01]
2018-11-10 19:00:16,997 [salt.state       :300 ][INFO    ][3079] {'host': 'msg01'}
2018-11-10 19:00:16,997 [salt.state       :1951][INFO    ][3079] Completed state [msg01] at time 19:00:16.997730 duration_in_ms=1.555
2018-11-10 19:00:16,998 [salt.state       :1780][INFO    ][3079] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 19:00:16.998132
2018-11-10 19:00:16,998 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:16,999 [salt.state       :300 ][INFO    ][3079] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:16,999 [salt.state       :1951][INFO    ][3079] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 19:00:16.999655 duration_in_ms=1.522
2018-11-10 19:00:17,000 [salt.state       :1780][INFO    ][3079] Running state [msg] at time 19:00:17.000056
2018-11-10 19:00:17,000 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg]
2018-11-10 19:00:17,002 [salt.state       :300 ][INFO    ][3079] {'host': 'msg'}
2018-11-10 19:00:17,004 [salt.state       :1951][INFO    ][3079] Completed state [msg] at time 19:00:17.004150 duration_in_ms=4.094
2018-11-10 19:00:17,004 [salt.state       :1780][INFO    ][3079] Running state [msg.mcp-ovs-dpdk-ha.local] at time 19:00:17.004545
2018-11-10 19:00:17,004 [salt.state       :1813][INFO    ][3079] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,006 [salt.state       :300 ][INFO    ][3079] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,007 [salt.state       :1951][INFO    ][3079] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 19:00:17.007012 duration_in_ms=2.467
2018-11-10 19:00:17,007 [salt.state       :1780][INFO    ][3079] Running state [cfg01] at time 19:00:17.007426
2018-11-10 19:00:17,007 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cfg01]
2018-11-10 19:00:17,008 [salt.state       :300 ][INFO    ][3079] Host cfg01 (192.168.10.11) already present
2018-11-10 19:00:17,008 [salt.state       :1951][INFO    ][3079] Completed state [cfg01] at time 19:00:17.008351 duration_in_ms=0.925
2018-11-10 19:00:17,008 [salt.state       :1780][INFO    ][3079] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:00:17.008778
2018-11-10 19:00:17,009 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,009 [salt.state       :300 ][INFO    ][3079] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2018-11-10 19:00:17,009 [salt.state       :1951][INFO    ][3079] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:00:17.009713 duration_in_ms=0.936
2018-11-10 19:00:17,010 [salt.state       :1780][INFO    ][3079] Running state [cmp002] at time 19:00:17.010143
2018-11-10 19:00:17,010 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cmp002]
2018-11-10 19:00:17,012 [salt.state       :300 ][INFO    ][3079] {'host': 'cmp002'}
2018-11-10 19:00:17,013 [salt.state       :1951][INFO    ][3079] Completed state [cmp002] at time 19:00:17.012974 duration_in_ms=2.832
2018-11-10 19:00:17,013 [salt.state       :1780][INFO    ][3079] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 19:00:17.013388
2018-11-10 19:00:17,014 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,015 [salt.state       :300 ][INFO    ][3079] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,016 [salt.state       :1951][INFO    ][3079] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 19:00:17.016082 duration_in_ms=2.694
2018-11-10 19:00:17,016 [salt.state       :1780][INFO    ][3079] Running state [cmp001] at time 19:00:17.016486
2018-11-10 19:00:17,016 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cmp001]
2018-11-10 19:00:17,017 [salt.state       :300 ][INFO    ][3079] {'host': 'cmp001'}
2018-11-10 19:00:17,018 [salt.state       :1951][INFO    ][3079] Completed state [cmp001] at time 19:00:17.018053 duration_in_ms=1.567
2018-11-10 19:00:17,018 [salt.state       :1780][INFO    ][3079] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 19:00:17.018491
2018-11-10 19:00:17,018 [salt.state       :1813][INFO    ][3079] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,020 [salt.state       :300 ][INFO    ][3079] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,020 [salt.state       :1951][INFO    ][3079] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 19:00:17.020910 duration_in_ms=2.418
2018-11-10 19:00:17,021 [salt.state       :1780][INFO    ][3079] Running state [dbs01] at time 19:00:17.021312
2018-11-10 19:00:17,021 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs01]
2018-11-10 19:00:17,023 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs01'}
2018-11-10 19:00:17,024 [salt.state       :1951][INFO    ][3079] Completed state [dbs01] at time 19:00:17.024003 duration_in_ms=2.691
2018-11-10 19:00:17,024 [salt.state       :1780][INFO    ][3079] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 19:00:17.024413
2018-11-10 19:00:17,024 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,026 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,026 [salt.state       :1951][INFO    ][3079] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 19:00:17.026399 duration_in_ms=1.986
2018-11-10 19:00:17,026 [salt.state       :1780][INFO    ][3079] Running state [dbs02] at time 19:00:17.026810
2018-11-10 19:00:17,027 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs02]
2018-11-10 19:00:17,029 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs02'}
2018-11-10 19:00:17,029 [salt.state       :1951][INFO    ][3079] Completed state [dbs02] at time 19:00:17.029845 duration_in_ms=3.035
2018-11-10 19:00:17,030 [salt.state       :1780][INFO    ][3079] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 19:00:17.030561
2018-11-10 19:00:17,030 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,032 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,032 [salt.state       :1951][INFO    ][3079] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 19:00:17.032766 duration_in_ms=2.205
2018-11-10 19:00:17,033 [salt.state       :1780][INFO    ][3079] Running state [dbs03] at time 19:00:17.033174
2018-11-10 19:00:17,033 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs03]
2018-11-10 19:00:17,036 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs03'}
2018-11-10 19:00:17,036 [salt.state       :1951][INFO    ][3079] Completed state [dbs03] at time 19:00:17.036471 duration_in_ms=3.297
2018-11-10 19:00:17,036 [salt.state       :1780][INFO    ][3079] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 19:00:17.036911
2018-11-10 19:00:17,037 [salt.state       :1813][INFO    ][3079] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,038 [salt.state       :300 ][INFO    ][3079] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,039 [salt.state       :1951][INFO    ][3079] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 19:00:17.039161 duration_in_ms=2.25
2018-11-10 19:00:17,040 [salt.state       :1780][INFO    ][3079] Running state [mas01] at time 19:00:17.040402
2018-11-10 19:00:17,040 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mas01]
2018-11-10 19:00:17,043 [salt.state       :300 ][INFO    ][3079] {'host': 'mas01'}
2018-11-10 19:00:17,044 [salt.state       :1951][INFO    ][3079] Completed state [mas01] at time 19:00:17.044077 duration_in_ms=3.675
2018-11-10 19:00:17,044 [salt.state       :1780][INFO    ][3079] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 19:00:17.044488
2018-11-10 19:00:17,044 [salt.state       :1813][INFO    ][3079] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,047 [salt.state       :300 ][INFO    ][3079] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,047 [salt.state       :1951][INFO    ][3079] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 19:00:17.047282 duration_in_ms=2.794
2018-11-10 19:00:17,048 [salt.state       :1780][INFO    ][3079] Running state [ctl02] at time 19:00:17.047963
2018-11-10 19:00:17,048 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl02]
2018-11-10 19:00:17,050 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl02'}
2018-11-10 19:00:17,051 [salt.state       :1951][INFO    ][3079] Completed state [ctl02] at time 19:00:17.051034 duration_in_ms=3.07
2018-11-10 19:00:17,051 [salt.state       :1780][INFO    ][3079] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 19:00:17.051444
2018-11-10 19:00:17,051 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,053 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,053 [salt.state       :1951][INFO    ][3079] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 19:00:17.053400 duration_in_ms=1.956
2018-11-10 19:00:17,053 [salt.state       :1780][INFO    ][3079] Running state [ctl03] at time 19:00:17.053820
2018-11-10 19:00:17,054 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl03]
2018-11-10 19:00:17,056 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl03'}
2018-11-10 19:00:17,056 [salt.state       :1951][INFO    ][3079] Completed state [ctl03] at time 19:00:17.056328 duration_in_ms=2.506
2018-11-10 19:00:17,057 [salt.state       :1780][INFO    ][3079] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 19:00:17.057071
2018-11-10 19:00:17,057 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,059 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,059 [salt.state       :1951][INFO    ][3079] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 19:00:17.059844 duration_in_ms=2.773
2018-11-10 19:00:17,060 [salt.state       :1780][INFO    ][3079] Running state [ctl01] at time 19:00:17.060277
2018-11-10 19:00:17,060 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl01]
2018-11-10 19:00:17,062 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl01'}
2018-11-10 19:00:17,062 [salt.state       :1951][INFO    ][3079] Completed state [ctl01] at time 19:00:17.062425 duration_in_ms=2.148
2018-11-10 19:00:17,062 [salt.state       :1780][INFO    ][3079] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 19:00:17.062849
2018-11-10 19:00:17,063 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,065 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,065 [salt.state       :1951][INFO    ][3079] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 19:00:17.065420 duration_in_ms=2.571
2018-11-10 19:00:17,065 [salt.state       :1780][INFO    ][3079] Running state [ctl] at time 19:00:17.065835
2018-11-10 19:00:17,066 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl]
2018-11-10 19:00:17,069 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl'}
2018-11-10 19:00:17,069 [salt.state       :1951][INFO    ][3079] Completed state [ctl] at time 19:00:17.069893 duration_in_ms=4.058
2018-11-10 19:00:17,070 [salt.state       :1780][INFO    ][3079] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 19:00:17.070358
2018-11-10 19:00:17,070 [salt.state       :1813][INFO    ][3079] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2018-11-10 19:00:17,072 [salt.state       :300 ][INFO    ][3079] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2018-11-10 19:00:17,073 [salt.state       :1951][INFO    ][3079] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 19:00:17.073118 duration_in_ms=2.76
2018-11-10 19:00:17,073 [salt.state       :1780][INFO    ][3079] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 19:00:17.073380
2018-11-10 19:00:17,073 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-11-10 19:00:17,075 [salt.state       :300 ][INFO    ][3079] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-11-10 19:00:17,075 [salt.state       :1951][INFO    ][3079] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 19:00:17.075202 duration_in_ms=1.822
2018-11-10 19:00:17,076 [salt.state       :1780][INFO    ][3079] Running state [ens3] at time 19:00:17.076114
2018-11-10 19:00:17,076 [salt.state       :1813][INFO    ][3079] Executing state network.managed for [ens3]
2018-11-10 19:00:17,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['ifup', 'ens3'] in directory '/root'
2018-11-10 19:00:18,489 [salt.state       :300 ][INFO    ][3079] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-11-10 19:00:18,490 [salt.state       :1951][INFO    ][3079] Completed state [ens3] at time 19:00:18.490156 duration_in_ms=1414.041
2018-11-10 19:00:18,491 [salt.state       :1780][INFO    ][3079] Running state [ens2] at time 19:00:18.491200
2018-11-10 19:00:18,491 [salt.state       :1813][INFO    ][3079] Executing state network.managed for [ens2]
2018-11-10 19:00:18,528 [salt.state       :300 ][INFO    ][3079] {'interface': 'Added network interface.'}
2018-11-10 19:00:18,529 [salt.state       :1951][INFO    ][3079] Completed state [ens2] at time 19:00:18.529687 duration_in_ms=38.486
2018-11-10 19:00:18,530 [salt.state       :1780][INFO    ][3079] Running state [linux_system_network] at time 19:00:18.530548
2018-11-10 19:00:18,531 [salt.state       :1813][INFO    ][3079] Executing state network.system for [linux_system_network]
2018-11-10 19:00:18,532 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-11-10 19:00:18,553 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-11-10 19:00:18,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-11-10 19:00:18,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-11-10 19:00:19,263 [salt.loaded.int.module.debian_ip:1964][WARNING ][3079] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-11-10 19:00:19,264 [salt.state       :300 ][INFO    ][3079] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb03\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2018-11-10 19:00:19,265 [salt.state       :1951][INFO    ][3079] Completed state [linux_system_network] at time 19:00:19.265047 duration_in_ms=734.499
2018-11-10 19:00:19,268 [salt.state       :1780][INFO    ][3079] Running state [/etc/profile.d/proxy.sh] at time 19:00:19.268812
2018-11-10 19:00:19,269 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-11-10 19:00:19,270 [salt.state       :300 ][INFO    ][3079] File /etc/profile.d/proxy.sh is not present
2018-11-10 19:00:19,271 [salt.state       :1951][INFO    ][3079] Completed state [/etc/profile.d/proxy.sh] at time 19:00:19.271259 duration_in_ms=2.448
2018-11-10 19:00:19,272 [salt.state       :1780][INFO    ][3079] Running state [/etc/apt/apt.conf.d/95proxies] at time 19:00:19.272323
2018-11-10 19:00:19,272 [salt.state       :1813][INFO    ][3079] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-11-10 19:00:19,274 [salt.state       :300 ][INFO    ][3079] File /etc/apt/apt.conf.d/95proxies is not present
2018-11-10 19:00:19,275 [salt.state       :1951][INFO    ][3079] Completed state [/etc/apt/apt.conf.d/95proxies] at time 19:00:19.274970 duration_in_ms=2.647
2018-11-10 19:00:19,277 [salt.state       :1780][INFO    ][3079] Running state [/dev/shm] at time 19:00:19.277466
2018-11-10 19:00:19,277 [salt.state       :1813][INFO    ][3079] Executing state mount.mounted for [/dev/shm]
2018-11-10 19:00:19,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'mount -l' in directory '/root'
2018-11-10 19:00:19,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'blkid' in directory '/root'
2018-11-10 19:00:19,337 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'mount -l' in directory '/root'
2018-11-10 19:00:19,364 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-11-10 19:00:19,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'mount -l' in directory '/root'
2018-11-10 19:00:19,411 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-11-10 19:00:19,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'mount -l' in directory '/root'
2018-11-10 19:00:19,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'umount /dev/shm' in directory '/root'
2018-11-10 19:00:19,479 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3079] Command '['umount', '/dev/shm']' failed with return code: 32
2018-11-10 19:00:19,480 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3079] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2018-11-10 19:00:19,480 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3079] retcode: 32
2018-11-10 19:00:19,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'mount -l' in directory '/root'
2018-11-10 19:00:19,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command 'blkid' in directory '/root'
2018-11-10 19:00:19,535 [salt.state       :300 ][INFO    ][3079] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2018-11-10 19:00:19,536 [salt.state       :1951][INFO    ][3079] Completed state [/dev/shm] at time 19:00:19.536099 duration_in_ms=258.631
2018-11-10 19:00:19,539 [salt.state       :1780][INFO    ][3079] Running state [ntp] at time 19:00:19.539819
2018-11-10 19:00:19,540 [salt.state       :1813][INFO    ][3079] Executing state pkg.installed for [ntp]
2018-11-10 19:00:19,858 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:00:19,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-11-10 19:00:21,075 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190021063619
2018-11-10 19:00:21,104 [salt.minion      :1432][INFO    ][5666] Starting a new job with PID 5666
2018-11-10 19:00:21,139 [salt.minion      :1711][INFO    ][5666] Returning information for job: 20181110190021063619
2018-11-10 19:00:25,817 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:00:25,864 [salt.state       :300 ][INFO    ][3079] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-11-10 19:00:25,893 [salt.state       :915 ][INFO    ][3079] Loading fresh modules for state activity
2018-11-10 19:00:25,951 [salt.state       :1951][INFO    ][3079] Completed state [ntp] at time 19:00:25.951273 duration_in_ms=6411.454
2018-11-10 19:00:25,959 [salt.state       :1780][INFO    ][3079] Running state [/etc/ntp.conf] at time 19:00:25.959388
2018-11-10 19:00:25,959 [salt.state       :1813][INFO    ][3079] Executing state file.managed for [/etc/ntp.conf]
2018-11-10 19:00:25,985 [salt.fileclient  :1219][INFO    ][3079] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-11-10 19:00:26,080 [salt.state       :300 ][INFO    ][3079] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-11-10 19:00:26,081 [salt.state       :1951][INFO    ][3079] Completed state [/etc/ntp.conf] at time 19:00:26.081134 duration_in_ms=121.746
2018-11-10 19:00:26,733 [salt.state       :1780][INFO    ][3079] Running state [ntp] at time 19:00:26.733036
2018-11-10 19:00:26,733 [salt.state       :1813][INFO    ][3079] Executing state service.running for [ntp]
2018-11-10 19:00:26,736 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-11-10 19:00:26,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-10 19:00:26,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-11-10 19:00:26,824 [salt.state       :300 ][INFO    ][3079] The service ntp is already running
2018-11-10 19:00:26,825 [salt.state       :1951][INFO    ][3079] Completed state [ntp] at time 19:00:26.825200 duration_in_ms=92.164
2018-11-10 19:00:26,825 [salt.state       :1780][INFO    ][3079] Running state [ntp] at time 19:00:26.825760
2018-11-10 19:00:26,828 [salt.state       :1813][INFO    ][3079] Executing state service.mod_watch for [ntp]
2018-11-10 19:00:26,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-10 19:00:26,855 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3079] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-11-10 19:00:26,971 [salt.state       :300 ][INFO    ][3079] {'ntp': True}
2018-11-10 19:00:26,972 [salt.state       :1951][INFO    ][3079] Completed state [ntp] at time 19:00:26.972351 duration_in_ms=146.591
2018-11-10 19:00:26,983 [salt.minion      :1711][INFO    ][3079] Returning information for job: 20181110185924151568
2018-11-10 19:00:51,744 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.apply with jid 20181110190051727558
2018-11-10 19:00:51,772 [salt.minion      :1432][INFO    ][6620] Starting a new job with PID 6620
2018-11-10 19:00:58,136 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190058121730
2018-11-10 19:00:58,171 [salt.minion      :1432][INFO    ][6627] Starting a new job with PID 6627
2018-11-10 19:00:58,203 [salt.minion      :1711][INFO    ][6627] Returning information for job: 20181110190058121730
2018-11-10 19:00:59,621 [salt.state       :915 ][INFO    ][6620] Loading fresh modules for state activity
2018-11-10 19:01:05,271 [salt.state       :1780][INFO    ][6620] Running state [/etc/environment] at time 19:01:05.271929
2018-11-10 19:01:05,273 [salt.state       :1813][INFO    ][6620] Executing state file.blockreplace for [/etc/environment]
2018-11-10 19:01:05,280 [salt.state       :300 ][INFO    ][6620] No changes needed to be made
2018-11-10 19:01:05,281 [salt.state       :1951][INFO    ][6620] Completed state [/etc/environment] at time 19:01:05.281152 duration_in_ms=9.223
2018-11-10 19:01:05,281 [salt.state       :1780][INFO    ][6620] Running state [/etc/profile.d] at time 19:01:05.281648
2018-11-10 19:01:05,282 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/profile.d]
2018-11-10 19:01:05,284 [salt.state       :300 ][INFO    ][6620] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-11-10 19:01:05,286 [salt.state       :1951][INFO    ][6620] Completed state [/etc/profile.d] at time 19:01:05.286213 duration_in_ms=4.564
2018-11-10 19:01:05,286 [salt.state       :1780][INFO    ][6620] Running state [/etc/bash.bashrc] at time 19:01:05.286736
2018-11-10 19:01:05,287 [salt.state       :1813][INFO    ][6620] Executing state file.blockreplace for [/etc/bash.bashrc]
2018-11-10 19:01:06,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['git', '--version'] in directory '/root'
2018-11-10 19:01:06,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2018-11-10 19:01:06,556 [salt.state       :300 ][INFO    ][6620] No changes needed to be made
2018-11-10 19:01:06,556 [salt.state       :1951][INFO    ][6620] Completed state [/etc/bash.bashrc] at time 19:01:06.556390 duration_in_ms=1269.654
2018-11-10 19:01:06,556 [salt.state       :1780][INFO    ][6620] Running state [/etc/profile] at time 19:01:06.556836
2018-11-10 19:01:06,557 [salt.state       :1813][INFO    ][6620] Executing state file.blockreplace for [/etc/profile]
2018-11-10 19:01:06,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'test -f /etc/profile' in directory '/root'
2018-11-10 19:01:06,585 [salt.state       :300 ][INFO    ][6620] No changes needed to be made
2018-11-10 19:01:06,585 [salt.state       :1951][INFO    ][6620] Completed state [/etc/profile] at time 19:01:06.585870 duration_in_ms=29.034
2018-11-10 19:01:06,586 [salt.state       :1780][INFO    ][6620] Running state [/etc/login.defs] at time 19:01:06.586821
2018-11-10 19:01:06,587 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/login.defs]
2018-11-10 19:01:06,762 [salt.state       :300 ][INFO    ][6620] File /etc/login.defs is in the correct state
2018-11-10 19:01:06,763 [salt.state       :1951][INFO    ][6620] Completed state [/etc/login.defs] at time 19:01:06.763139 duration_in_ms=176.317
2018-11-10 19:01:06,773 [salt.state       :1780][INFO    ][6620] Running state [at] at time 19:01:06.773889
2018-11-10 19:01:06,774 [salt.state       :1813][INFO    ][6620] Executing state pkg.installed for [at]
2018-11-10 19:01:06,775 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:01:07,340 [salt.state       :300 ][INFO    ][6620] All specified packages are already installed
2018-11-10 19:01:07,343 [salt.state       :1951][INFO    ][6620] Completed state [at] at time 19:01:07.343073 duration_in_ms=569.182
2018-11-10 19:01:07,345 [salt.state       :1780][INFO    ][6620] Running state [atd] at time 19:01:07.345645
2018-11-10 19:01:07,346 [salt.state       :1813][INFO    ][6620] Executing state service.running for [atd]
2018-11-10 19:01:07,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2018-11-10 19:01:07,403 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2018-11-10 19:01:07,429 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2018-11-10 19:01:07,452 [salt.state       :300 ][INFO    ][6620] The service atd is already running
2018-11-10 19:01:07,453 [salt.state       :1951][INFO    ][6620] Completed state [atd] at time 19:01:07.452975 duration_in_ms=107.327
2018-11-10 19:01:07,458 [salt.state       :1780][INFO    ][6620] Running state [cron] at time 19:01:07.458236
2018-11-10 19:01:07,458 [salt.state       :1813][INFO    ][6620] Executing state pkg.installed for [cron]
2018-11-10 19:01:07,478 [salt.state       :300 ][INFO    ][6620] All specified packages are already installed
2018-11-10 19:01:07,479 [salt.state       :1951][INFO    ][6620] Completed state [cron] at time 19:01:07.479019 duration_in_ms=20.783
2018-11-10 19:01:07,480 [salt.state       :1780][INFO    ][6620] Running state [/etc/at.allow] at time 19:01:07.480725
2018-11-10 19:01:07,482 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/at.allow]
2018-11-10 19:01:07,514 [salt.state       :300 ][INFO    ][6620] File /etc/at.allow is in the correct state
2018-11-10 19:01:07,515 [salt.state       :1951][INFO    ][6620] Completed state [/etc/at.allow] at time 19:01:07.514991 duration_in_ms=34.266
2018-11-10 19:01:07,515 [salt.state       :1780][INFO    ][6620] Running state [/etc/at.deny] at time 19:01:07.515507
2018-11-10 19:01:07,516 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/at.deny]
2018-11-10 19:01:07,517 [salt.state       :300 ][INFO    ][6620] File /etc/at.deny is not present
2018-11-10 19:01:07,519 [salt.state       :1951][INFO    ][6620] Completed state [/etc/at.deny] at time 19:01:07.519039 duration_in_ms=3.532
2018-11-10 19:01:07,523 [salt.state       :1780][INFO    ][6620] Running state [cron] at time 19:01:07.523261
2018-11-10 19:01:07,524 [salt.state       :1813][INFO    ][6620] Executing state service.running for [cron]
2018-11-10 19:01:07,526 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2018-11-10 19:01:07,554 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2018-11-10 19:01:07,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2018-11-10 19:01:07,605 [salt.state       :300 ][INFO    ][6620] The service cron is already running
2018-11-10 19:01:07,607 [salt.state       :1951][INFO    ][6620] Completed state [cron] at time 19:01:07.606659 duration_in_ms=83.398
2018-11-10 19:01:07,610 [salt.state       :1780][INFO    ][6620] Running state [/etc/cron.allow] at time 19:01:07.610092
2018-11-10 19:01:07,610 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/cron.allow]
2018-11-10 19:01:07,637 [salt.state       :300 ][INFO    ][6620] File /etc/cron.allow is in the correct state
2018-11-10 19:01:07,637 [salt.state       :1951][INFO    ][6620] Completed state [/etc/cron.allow] at time 19:01:07.637931 duration_in_ms=27.839
2018-11-10 19:01:07,638 [salt.state       :1780][INFO    ][6620] Running state [/etc/cron.deny] at time 19:01:07.638448
2018-11-10 19:01:07,638 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/cron.deny]
2018-11-10 19:01:07,639 [salt.state       :300 ][INFO    ][6620] File /etc/cron.deny is not present
2018-11-10 19:01:07,640 [salt.state       :1951][INFO    ][6620] Completed state [/etc/cron.deny] at time 19:01:07.640020 duration_in_ms=1.572
2018-11-10 19:01:07,642 [salt.state       :1780][INFO    ][6620] Running state [/etc/crontab] at time 19:01:07.642489
2018-11-10 19:01:07,643 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/crontab]
2018-11-10 19:01:07,644 [salt.state       :300 ][INFO    ][6620] File /etc/crontab exists with proper permissions. No changes made.
2018-11-10 19:01:07,645 [salt.state       :1951][INFO    ][6620] Completed state [/etc/crontab] at time 19:01:07.645171 duration_in_ms=2.682
2018-11-10 19:01:07,646 [salt.state       :1780][INFO    ][6620] Running state [/etc/cron.d] at time 19:01:07.646450
2018-11-10 19:01:07,646 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/cron.d]
2018-11-10 19:01:07,648 [salt.state       :300 ][INFO    ][6620] Directory /etc/cron.d is in the correct state
Directory /etc/cron.d updated
2018-11-10 19:01:07,649 [salt.state       :1951][INFO    ][6620] Completed state [/etc/cron.d] at time 19:01:07.649251 duration_in_ms=2.801
2018-11-10 19:01:07,650 [salt.state       :1780][INFO    ][6620] Running state [/etc/cron.daily] at time 19:01:07.650828
2018-11-10 19:01:07,651 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/cron.daily]
2018-11-10 19:01:07,653 [salt.state       :300 ][INFO    ][6620] Directory /etc/cron.daily is in the correct state
Directory /etc/cron.daily updated
2018-11-10 19:01:07,654 [salt.state       :1951][INFO    ][6620] Completed state [/etc/cron.daily] at time 19:01:07.654311 duration_in_ms=3.483
2018-11-10 19:01:07,655 [salt.state       :1780][INFO    ][6620] Running state [/etc/cron.hourly] at time 19:01:07.655573
2018-11-10 19:01:07,656 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/cron.hourly]
2018-11-10 19:01:07,657 [salt.state       :300 ][INFO    ][6620] Directory /etc/cron.hourly is in the correct state
Directory /etc/cron.hourly updated
2018-11-10 19:01:07,658 [salt.state       :1951][INFO    ][6620] Completed state [/etc/cron.hourly] at time 19:01:07.658262 duration_in_ms=2.689
2018-11-10 19:01:07,659 [salt.state       :1780][INFO    ][6620] Running state [/etc/cron.monthly] at time 19:01:07.659521
2018-11-10 19:01:07,660 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/cron.monthly]
2018-11-10 19:01:07,661 [salt.state       :300 ][INFO    ][6620] Directory /etc/cron.monthly is in the correct state
Directory /etc/cron.monthly updated
2018-11-10 19:01:07,662 [salt.state       :1951][INFO    ][6620] Completed state [/etc/cron.monthly] at time 19:01:07.662012 duration_in_ms=2.49
2018-11-10 19:01:07,663 [salt.state       :1780][INFO    ][6620] Running state [/etc/cron.weekly] at time 19:01:07.663277
2018-11-10 19:01:07,663 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/cron.weekly]
2018-11-10 19:01:07,665 [salt.state       :300 ][INFO    ][6620] Directory /etc/cron.weekly is in the correct state
Directory /etc/cron.weekly updated
2018-11-10 19:01:07,666 [salt.state       :1951][INFO    ][6620] Completed state [/etc/cron.weekly] at time 19:01:07.666071 duration_in_ms=2.794
2018-11-10 19:01:07,670 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 19:01:07.670712
2018-11-10 19:01:07,671 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-11-10 19:01:07,696 [salt.state       :300 ][INFO    ][6620] File /etc/apt/apt.conf.d/99prefer_ipv4-salt is in the correct state
2018-11-10 19:01:07,696 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 19:01:07.696880 duration_in_ms=26.168
2018-11-10 19:01:07,698 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 19:01:07.697990
2018-11-10 19:01:07,698 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-11-10 19:01:07,723 [salt.state       :300 ][INFO    ][6620] File /etc/apt/apt.conf.d/99allow_downgrades-salt is in the correct state
2018-11-10 19:01:07,723 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 19:01:07.723829 duration_in_ms=25.839
2018-11-10 19:01:07,726 [salt.state       :1780][INFO    ][6620] Running state [linux_repo_prereq_pkgs] at time 19:01:07.726509
2018-11-10 19:01:07,727 [salt.state       :1813][INFO    ][6620] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-11-10 19:01:07,740 [salt.state       :300 ][INFO    ][6620] All specified packages are already installed
2018-11-10 19:01:07,741 [salt.state       :1951][INFO    ][6620] Completed state [linux_repo_prereq_pkgs] at time 19:01:07.741067 duration_in_ms=14.558
2018-11-10 19:01:07,741 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 19:01:07.741609
2018-11-10 19:01:07,742 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-11-10 19:01:07,743 [salt.state       :300 ][INFO    ][6620] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-11-10 19:01:07,743 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 19:01:07.743477 duration_in_ms=1.868
2018-11-10 19:01:07,744 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 19:01:07.743971
2018-11-10 19:01:07,744 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-11-10 19:01:07,745 [salt.state       :300 ][INFO    ][6620] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-11-10 19:01:07,746 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 19:01:07.746309 duration_in_ms=2.338
2018-11-10 19:01:07,746 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 19:01:07.746791
2018-11-10 19:01:07,747 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-11-10 19:01:07,902 [salt.state       :300 ][INFO    ][6620] File /etc/apt/preferences.d/mirantis_openstack is in the correct state
2018-11-10 19:01:07,902 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 19:01:07.902901 duration_in_ms=156.11
2018-11-10 19:01:07,906 [salt.state       :1780][INFO    ][6620] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 19:01:07.906777
2018-11-10 19:01:07,907 [salt.state       :1813][INFO    ][6620] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-11-10 19:01:07,968 [salt.state       :300 ][INFO    ][6620] Package repo 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main' already configured
2018-11-10 19:01:07,969 [salt.state       :1951][INFO    ][6620] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 19:01:07.968964 duration_in_ms=62.187
2018-11-10 19:01:07,969 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 19:01:07.969742
2018-11-10 19:01:07,970 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-11-10 19:01:07,971 [salt.state       :300 ][INFO    ][6620] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-11-10 19:01:07,971 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 19:01:07.971464 duration_in_ms=1.722
2018-11-10 19:01:07,971 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/preferences.d/uca] at time 19:01:07.971916
2018-11-10 19:01:07,972 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-11-10 19:01:08,175 [salt.state       :300 ][INFO    ][6620] File /etc/apt/preferences.d/uca is in the correct state
2018-11-10 19:01:08,176 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/preferences.d/uca] at time 19:01:08.176231 duration_in_ms=204.315
2018-11-10 19:01:08,176 [salt.state       :1780][INFO    ][6620] Running state [echo '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' | base64 -d | apt-key add -] at time 19:01:08.176790
2018-11-10 19:01:08,178 [salt.state       :1813][INFO    ][6620] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-11-10 19:01:08,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-11-10 19:01:08,191 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190108175863
2018-11-10 19:01:08,215 [salt.minion      :1432][INFO    ][6740] Starting a new job with PID 6740
2018-11-10 19:01:08,242 [salt.minion      :1711][INFO    ][6740] Returning information for job: 20181110190108175863
2018-11-10 19:01:08,407 [salt.state       :300 ][INFO    ][6620] {'pid': 6731, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-11-10 19:01:08,407 [salt.state       :1951][INFO    ][6620] Completed state [echo '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' | base64 -d | apt-key add -] at time 19:01:08.407600 duration_in_ms=230.809
2018-11-10 19:01:08,414 [salt.state       :1780][INFO    ][6620] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 19:01:08.414691
2018-11-10 19:01:08,415 [salt.state       :1813][INFO    ][6620] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-11-10 19:01:08,477 [salt.state       :300 ][INFO    ][6620] Package repo 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main' already configured
2018-11-10 19:01:08,478 [salt.state       :1951][INFO    ][6620] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 19:01:08.478071 duration_in_ms=63.38
2018-11-10 19:01:08,478 [salt.state       :1780][INFO    ][6620] Running state [pkg.refresh_db] at time 19:01:08.478338
2018-11-10 19:01:08,478 [salt.state       :1813][INFO    ][6620] Executing state module.run for [pkg.refresh_db]
2018-11-10 19:01:08,479 [salt.utils.decorators:613 ][WARNING ][6620] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-10 19:01:08,480 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:01:10,854 [salt.state       :300 ][INFO    ][6620] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': None, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': None}}
2018-11-10 19:01:10,855 [salt.state       :1951][INFO    ][6620] Completed state [pkg.refresh_db] at time 19:01:10.855426 duration_in_ms=2377.087
2018-11-10 19:01:10,855 [salt.state       :1780][INFO    ][6620] Running state [linux_extra_packages_removed] at time 19:01:10.855880
2018-11-10 19:01:10,856 [salt.state       :1813][INFO    ][6620] Executing state pkg.removed for [linux_extra_packages_removed]
2018-11-10 19:01:10,876 [salt.state       :300 ][INFO    ][6620] All specified packages are already absent
2018-11-10 19:01:10,877 [salt.state       :1951][INFO    ][6620] Completed state [linux_extra_packages_removed] at time 19:01:10.877136 duration_in_ms=21.255
2018-11-10 19:01:10,877 [salt.state       :1780][INFO    ][6620] Running state [linux_extra_packages_latest] at time 19:01:10.877408
2018-11-10 19:01:10,877 [salt.state       :1813][INFO    ][6620] Executing state pkg.latest for [linux_extra_packages_latest]
2018-11-10 19:01:10,894 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-11-10 19:01:11,043 [salt.state       :300 ][INFO    ][6620] Package python-tornado is already up-to-date
2018-11-10 19:01:11,043 [salt.state       :1951][INFO    ][6620] Completed state [linux_extra_packages_latest] at time 19:01:11.043889 duration_in_ms=166.481
2018-11-10 19:01:11,044 [salt.state       :1780][INFO    ][6620] Running state [UTC] at time 19:01:11.044300
2018-11-10 19:01:11,045 [salt.state       :1813][INFO    ][6620] Executing state timezone.system for [UTC]
2018-11-10 19:01:11,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['timedatectl'] in directory '/root'
2018-11-10 19:01:11,086 [salt.state       :300 ][INFO    ][6620] Timezone UTC already set, UTC already set to UTC
2018-11-10 19:01:11,086 [salt.state       :1951][INFO    ][6620] Completed state [UTC] at time 19:01:11.086526 duration_in_ms=42.225
2018-11-10 19:01:11,087 [salt.state       :1780][INFO    ][6620] Running state [/etc/default/grub.d] at time 19:01:11.086993
2018-11-10 19:01:11,087 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/default/grub.d]
2018-11-10 19:01:11,089 [salt.state       :300 ][INFO    ][6620] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-11-10 19:01:11,089 [salt.state       :1951][INFO    ][6620] Completed state [/etc/default/grub.d] at time 19:01:11.089269 duration_in_ms=2.276
2018-11-10 19:01:11,089 [salt.state       :1780][INFO    ][6620] Running state [update-grub] at time 19:01:11.089843
2018-11-10 19:01:11,090 [salt.state       :1813][INFO    ][6620] Executing state cmd.wait for [update-grub]
2018-11-10 19:01:11,090 [salt.state       :300 ][INFO    ][6620] No changes made for update-grub
2018-11-10 19:01:11,090 [salt.state       :1951][INFO    ][6620] Completed state [update-grub] at time 19:01:11.090606 duration_in_ms=0.763
2018-11-10 19:01:11,093 [salt.state       :1780][INFO    ][6620] Running state [/boot/grub/grub.cfg] at time 19:01:11.093333
2018-11-10 19:01:11,094 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/boot/grub/grub.cfg]
2018-11-10 19:01:11,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-11-10 19:01:11,119 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:11,120 [salt.state       :300 ][INFO    ][6620] File /boot/grub/grub.cfg exists with proper permissions. No changes made.
2018-11-10 19:01:11,120 [salt.state       :1951][INFO    ][6620] Completed state [/boot/grub/grub.cfg] at time 19:01:11.120851 duration_in_ms=27.517
2018-11-10 19:01:11,121 [salt.state       :1780][INFO    ][6620] Running state [nf_conntrack] at time 19:01:11.121271
2018-11-10 19:01:11,121 [salt.state       :1813][INFO    ][6620] Executing state kmod.present for [nf_conntrack]
2018-11-10 19:01:11,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'lsmod' in directory '/root'
2018-11-10 19:01:11,140 [salt.state       :300 ][INFO    ][6620] Kernel module nf_conntrack is already present
2018-11-10 19:01:11,141 [salt.state       :1951][INFO    ][6620] Completed state [nf_conntrack] at time 19:01:11.141141 duration_in_ms=19.87
2018-11-10 19:01:11,142 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d] at time 19:01:11.142139
2018-11-10 19:01:11,142 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/modprobe.d]
2018-11-10 19:01:11,144 [salt.state       :300 ][INFO    ][6620] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2018-11-10 19:01:11,144 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d] at time 19:01:11.144851 duration_in_ms=2.711
2018-11-10 19:01:11,147 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/hfsplus.conf] at time 19:01:11.147913
2018-11-10 19:01:11,148 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2018-11-10 19:01:11,324 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/hfsplus.conf is in the correct state
2018-11-10 19:01:11,325 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/hfsplus.conf] at time 19:01:11.325108 duration_in_ms=177.195
2018-11-10 19:01:11,327 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/rds.conf] at time 19:01:11.327181
2018-11-10 19:01:11,327 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2018-11-10 19:01:11,502 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/rds.conf is in the correct state
2018-11-10 19:01:11,502 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/rds.conf] at time 19:01:11.502406 duration_in_ms=175.225
2018-11-10 19:01:11,503 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/cramfs.conf] at time 19:01:11.503890
2018-11-10 19:01:11,504 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2018-11-10 19:01:11,681 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/cramfs.conf is in the correct state
2018-11-10 19:01:11,681 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/cramfs.conf] at time 19:01:11.681403 duration_in_ms=177.512
2018-11-10 19:01:11,683 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/freevxfs.conf] at time 19:01:11.683214
2018-11-10 19:01:11,683 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2018-11-10 19:01:11,868 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/freevxfs.conf is in the correct state
2018-11-10 19:01:11,869 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/freevxfs.conf] at time 19:01:11.868995 duration_in_ms=185.781
2018-11-10 19:01:11,870 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/hfs.conf] at time 19:01:11.870491
2018-11-10 19:01:11,870 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2018-11-10 19:01:12,038 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/hfs.conf is in the correct state
2018-11-10 19:01:12,039 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/hfs.conf] at time 19:01:12.038989 duration_in_ms=168.498
2018-11-10 19:01:12,040 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/squashfs.conf] at time 19:01:12.040449
2018-11-10 19:01:12,040 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2018-11-10 19:01:12,210 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/squashfs.conf is in the correct state
2018-11-10 19:01:12,210 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/squashfs.conf] at time 19:01:12.210527 duration_in_ms=170.078
2018-11-10 19:01:12,212 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/udf.conf] at time 19:01:12.212254
2018-11-10 19:01:12,212 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2018-11-10 19:01:12,385 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/udf.conf is in the correct state
2018-11-10 19:01:12,386 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/udf.conf] at time 19:01:12.386213 duration_in_ms=173.959
2018-11-10 19:01:12,387 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/vfat.conf] at time 19:01:12.387940
2018-11-10 19:01:12,388 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2018-11-10 19:01:12,555 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/vfat.conf is in the correct state
2018-11-10 19:01:12,555 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/vfat.conf] at time 19:01:12.555450 duration_in_ms=167.51
2018-11-10 19:01:12,557 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/sctp.conf] at time 19:01:12.556997
2018-11-10 19:01:12,557 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2018-11-10 19:01:12,732 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/sctp.conf is in the correct state
2018-11-10 19:01:12,733 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/sctp.conf] at time 19:01:12.733148 duration_in_ms=176.15
2018-11-10 19:01:12,734 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/jffs2.conf] at time 19:01:12.734632
2018-11-10 19:01:12,734 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2018-11-10 19:01:12,905 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/jffs2.conf is in the correct state
2018-11-10 19:01:12,906 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/jffs2.conf] at time 19:01:12.905798 duration_in_ms=171.166
2018-11-10 19:01:12,908 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/tipc.conf] at time 19:01:12.908102
2018-11-10 19:01:12,908 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2018-11-10 19:01:13,189 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/tipc.conf is in the correct state
2018-11-10 19:01:13,189 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/tipc.conf] at time 19:01:13.189798 duration_in_ms=281.695
2018-11-10 19:01:13,192 [salt.state       :1780][INFO    ][6620] Running state [/etc/modprobe.d/dccp.conf] at time 19:01:13.192341
2018-11-10 19:01:13,192 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2018-11-10 19:01:13,383 [salt.state       :300 ][INFO    ][6620] File /etc/modprobe.d/dccp.conf is in the correct state
2018-11-10 19:01:13,384 [salt.state       :1951][INFO    ][6620] Completed state [/etc/modprobe.d/dccp.conf] at time 19:01:13.384472 duration_in_ms=192.13
2018-11-10 19:01:13,384 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_congestion_control] at time 19:01:13.384770
2018-11-10 19:01:13,385 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-11-10 19:01:13,386 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_congestion_control' in directory '/root'
2018-11-10 19:01:13,407 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_congestion_control = yeah is already set
2018-11-10 19:01:13,407 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_congestion_control] at time 19:01:13.407708 duration_in_ms=22.938
2018-11-10 19:01:13,408 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_slow_start_after_idle] at time 19:01:13.408436
2018-11-10 19:01:13,408 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-11-10 19:01:13,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_slow_start_after_idle' in directory '/root'
2018-11-10 19:01:13,431 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_slow_start_after_idle = 0 is already set
2018-11-10 19:01:13,431 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 19:01:13.431573 duration_in_ms=23.136
2018-11-10 19:01:13,432 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 19:01:13.432293
2018-11-10 19:01:13,432 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2018-11-10 19:01:13,434 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.icmp_echo_ignore_broadcasts' in directory '/root'
2018-11-10 19:01:13,453 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.icmp_echo_ignore_broadcasts = 1 is already set
2018-11-10 19:01:13,454 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 19:01:13.454542 duration_in_ms=22.248
2018-11-10 19:01:13,455 [salt.state       :1780][INFO    ][6620] Running state [net.nf_conntrack_max] at time 19:01:13.455567
2018-11-10 19:01:13,456 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.nf_conntrack_max]
2018-11-10 19:01:13,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.nf_conntrack_max' in directory '/root'
2018-11-10 19:01:13,476 [salt.state       :300 ][INFO    ][6620] Sysctl value net.nf_conntrack_max = 1048576 is already set
2018-11-10 19:01:13,476 [salt.state       :1951][INFO    ][6620] Completed state [net.nf_conntrack_max] at time 19:01:13.476782 duration_in_ms=21.214
2018-11-10 19:01:13,477 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 19:01:13.477235
2018-11-10 19:01:13,478 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2018-11-10 19:01:13,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.icmp_ignore_bogus_error_responses' in directory '/root'
2018-11-10 19:01:13,502 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.icmp_ignore_bogus_error_responses = 1 is already set
2018-11-10 19:01:13,502 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 19:01:13.502829 duration_in_ms=25.593
2018-11-10 19:01:13,503 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.default.log_martians] at time 19:01:13.503604
2018-11-10 19:01:13,504 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2018-11-10 19:01:13,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.default.log_martians' in directory '/root'
2018-11-10 19:01:13,525 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.default.log_martians = 1 is already set
2018-11-10 19:01:13,526 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.default.log_martians] at time 19:01:13.526463 duration_in_ms=22.858
2018-11-10 19:01:13,527 [salt.state       :1780][INFO    ][6620] Running state [net.core.somaxconn] at time 19:01:13.527475
2018-11-10 19:01:13,528 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.core.somaxconn]
2018-11-10 19:01:13,529 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.core.somaxconn' in directory '/root'
2018-11-10 19:01:13,551 [salt.state       :300 ][INFO    ][6620] Sysctl value net.core.somaxconn = 4096 is already set
2018-11-10 19:01:13,551 [salt.state       :1951][INFO    ][6620] Completed state [net.core.somaxconn] at time 19:01:13.551725 duration_in_ms=24.25
2018-11-10 19:01:13,552 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.all.send_redirects] at time 19:01:13.552765
2018-11-10 19:01:13,553 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2018-11-10 19:01:13,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.all.send_redirects' in directory '/root'
2018-11-10 19:01:13,577 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.all.send_redirects = 0 is already set
2018-11-10 19:01:13,578 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.all.send_redirects] at time 19:01:13.578373 duration_in_ms=25.608
2018-11-10 19:01:13,578 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_tw_reuse] at time 19:01:13.578840
2018-11-10 19:01:13,579 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-11-10 19:01:13,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_tw_reuse' in directory '/root'
2018-11-10 19:01:13,601 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_tw_reuse = 1 is already set
2018-11-10 19:01:13,601 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_tw_reuse] at time 19:01:13.601721 duration_in_ms=22.88
2018-11-10 19:01:13,602 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.default.rp_filter] at time 19:01:13.602471
2018-11-10 19:01:13,603 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2018-11-10 19:01:13,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.default.rp_filter' in directory '/root'
2018-11-10 19:01:13,626 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.default.rp_filter = 1 is already set
2018-11-10 19:01:13,626 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.default.rp_filter] at time 19:01:13.626852 duration_in_ms=24.38
2018-11-10 19:01:13,627 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_fin_timeout] at time 19:01:13.627307
2018-11-10 19:01:13,627 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-11-10 19:01:13,629 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_fin_timeout' in directory '/root'
2018-11-10 19:01:13,649 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_fin_timeout = 30 is already set
2018-11-10 19:01:13,650 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_fin_timeout] at time 19:01:13.650206 duration_in_ms=22.898
2018-11-10 19:01:13,651 [salt.state       :1780][INFO    ][6620] Running state [kernel.panic] at time 19:01:13.651203
2018-11-10 19:01:13,651 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [kernel.panic]
2018-11-10 19:01:13,652 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n kernel.panic' in directory '/root'
2018-11-10 19:01:13,672 [salt.state       :300 ][INFO    ][6620] Sysctl value kernel.panic = 60 is already set
2018-11-10 19:01:13,673 [salt.state       :1951][INFO    ][6620] Completed state [kernel.panic] at time 19:01:13.673014 duration_in_ms=21.811
2018-11-10 19:01:13,673 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_keepalive_probes] at time 19:01:13.673758
2018-11-10 19:01:13,674 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-11-10 19:01:13,675 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_keepalive_probes' in directory '/root'
2018-11-10 19:01:13,694 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_keepalive_probes = 8 is already set
2018-11-10 19:01:13,694 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_keepalive_probes] at time 19:01:13.694745 duration_in_ms=20.986
2018-11-10 19:01:13,695 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.all.log_martians] at time 19:01:13.695180
2018-11-10 19:01:13,695 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2018-11-10 19:01:13,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.all.log_martians' in directory '/root'
2018-11-10 19:01:13,719 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.all.log_martians = 1 is already set
2018-11-10 19:01:13,719 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.all.log_martians] at time 19:01:13.719721 duration_in_ms=24.541
2018-11-10 19:01:13,720 [salt.state       :1780][INFO    ][6620] Running state [fs.suid_dumpable] at time 19:01:13.720152
2018-11-10 19:01:13,720 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [fs.suid_dumpable]
2018-11-10 19:01:13,722 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n fs.suid_dumpable' in directory '/root'
2018-11-10 19:01:13,741 [salt.state       :300 ][INFO    ][6620] Sysctl value fs.suid_dumpable = 0 is already set
2018-11-10 19:01:13,742 [salt.state       :1951][INFO    ][6620] Completed state [fs.suid_dumpable] at time 19:01:13.742410 duration_in_ms=22.258
2018-11-10 19:01:13,742 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.default.accept_redirects] at time 19:01:13.742868
2018-11-10 19:01:13,743 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2018-11-10 19:01:13,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.default.accept_redirects' in directory '/root'
2018-11-10 19:01:13,765 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.default.accept_redirects = 0 is already set
2018-11-10 19:01:13,766 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.default.accept_redirects] at time 19:01:13.766841 duration_in_ms=23.972
2018-11-10 19:01:13,767 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.default.secure_redirects] at time 19:01:13.767270
2018-11-10 19:01:13,767 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2018-11-10 19:01:13,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.default.secure_redirects' in directory '/root'
2018-11-10 19:01:13,791 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.default.secure_redirects = 0 is already set
2018-11-10 19:01:13,791 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.default.secure_redirects] at time 19:01:13.791415 duration_in_ms=24.145
2018-11-10 19:01:13,792 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.default.accept_source_route] at time 19:01:13.792444
2018-11-10 19:01:13,792 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2018-11-10 19:01:13,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.default.accept_source_route' in directory '/root'
2018-11-10 19:01:13,814 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.default.accept_source_route = 0 is already set
2018-11-10 19:01:13,815 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.default.accept_source_route] at time 19:01:13.815392 duration_in_ms=22.948
2018-11-10 19:01:13,817 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_keepalive_intvl] at time 19:01:13.816977
2018-11-10 19:01:13,818 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-11-10 19:01:13,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_keepalive_intvl' in directory '/root'
2018-11-10 19:01:13,838 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_keepalive_intvl = 3 is already set
2018-11-10 19:01:13,839 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_keepalive_intvl] at time 19:01:13.839570 duration_in_ms=22.593
2018-11-10 19:01:13,840 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_keepalive_time] at time 19:01:13.840551
2018-11-10 19:01:13,840 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-11-10 19:01:13,842 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_keepalive_time' in directory '/root'
2018-11-10 19:01:13,863 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_keepalive_time = 30 is already set
2018-11-10 19:01:13,863 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_keepalive_time] at time 19:01:13.863573 duration_in_ms=23.021
2018-11-10 19:01:13,864 [salt.state       :1780][INFO    ][6620] Running state [kernel.randomize_va_space] at time 19:01:13.864013
2018-11-10 19:01:13,864 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [kernel.randomize_va_space]
2018-11-10 19:01:13,865 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n kernel.randomize_va_space' in directory '/root'
2018-11-10 19:01:13,886 [salt.state       :300 ][INFO    ][6620] Sysctl value kernel.randomize_va_space = 2 is already set
2018-11-10 19:01:13,886 [salt.state       :1951][INFO    ][6620] Completed state [kernel.randomize_va_space] at time 19:01:13.886596 duration_in_ms=22.583
2018-11-10 19:01:13,887 [salt.state       :1780][INFO    ][6620] Running state [fs.file-max] at time 19:01:13.887314
2018-11-10 19:01:13,888 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [fs.file-max]
2018-11-10 19:01:13,890 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n fs.file-max' in directory '/root'
2018-11-10 19:01:13,911 [salt.state       :300 ][INFO    ][6620] Sysctl value fs.file-max = 124165 is already set
2018-11-10 19:01:13,911 [salt.state       :1951][INFO    ][6620] Completed state [fs.file-max] at time 19:01:13.911690 duration_in_ms=24.375
2018-11-10 19:01:13,912 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_syncookies] at time 19:01:13.912122
2018-11-10 19:01:13,912 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2018-11-10 19:01:13,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_syncookies' in directory '/root'
2018-11-10 19:01:13,934 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_syncookies = 1 is already set
2018-11-10 19:01:13,935 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_syncookies] at time 19:01:13.935503 duration_in_ms=23.381
2018-11-10 19:01:13,935 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_max_syn_backlog] at time 19:01:13.935946
2018-11-10 19:01:13,936 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-11-10 19:01:13,938 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_max_syn_backlog' in directory '/root'
2018-11-10 19:01:13,961 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_max_syn_backlog = 8192 is already set
2018-11-10 19:01:13,962 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_max_syn_backlog] at time 19:01:13.962637 duration_in_ms=26.69
2018-11-10 19:01:13,963 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.all.rp_filter] at time 19:01:13.963066
2018-11-10 19:01:13,963 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2018-11-10 19:01:13,964 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.all.rp_filter' in directory '/root'
2018-11-10 19:01:13,988 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.all.rp_filter = 1 is already set
2018-11-10 19:01:13,989 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.all.rp_filter] at time 19:01:13.989094 duration_in_ms=26.027
2018-11-10 19:01:13,990 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.all.accept_source_route] at time 19:01:13.990120
2018-11-10 19:01:13,990 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2018-11-10 19:01:13,991 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.all.accept_source_route' in directory '/root'
2018-11-10 19:01:14,014 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.all.accept_source_route = 0 is already set
2018-11-10 19:01:14,015 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.all.accept_source_route] at time 19:01:14.015380 duration_in_ms=25.26
2018-11-10 19:01:14,015 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.tcp_retries2] at time 19:01:14.015836
2018-11-10 19:01:14,016 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-11-10 19:01:14,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.tcp_retries2' in directory '/root'
2018-11-10 19:01:14,040 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.tcp_retries2 = 5 is already set
2018-11-10 19:01:14,040 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.tcp_retries2] at time 19:01:14.040573 duration_in_ms=24.737
2018-11-10 19:01:14,041 [salt.state       :1780][INFO    ][6620] Running state [net.core.netdev_max_backlog] at time 19:01:14.041034
2018-11-10 19:01:14,043 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-11-10 19:01:14,044 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.core.netdev_max_backlog' in directory '/root'
2018-11-10 19:01:14,062 [salt.state       :300 ][INFO    ][6620] Sysctl value net.core.netdev_max_backlog = 261144 is already set
2018-11-10 19:01:14,062 [salt.state       :1951][INFO    ][6620] Completed state [net.core.netdev_max_backlog] at time 19:01:14.062571 duration_in_ms=21.535
2018-11-10 19:01:14,063 [salt.state       :1780][INFO    ][6620] Running state [vm.swappiness] at time 19:01:14.063304
2018-11-10 19:01:14,063 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [vm.swappiness]
2018-11-10 19:01:14,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n vm.swappiness' in directory '/root'
2018-11-10 19:01:14,084 [salt.state       :300 ][INFO    ][6620] Sysctl value vm.swappiness = 10 is already set
2018-11-10 19:01:14,085 [salt.state       :1951][INFO    ][6620] Completed state [vm.swappiness] at time 19:01:14.085092 duration_in_ms=21.787
2018-11-10 19:01:14,086 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.all.secure_redirects] at time 19:01:14.086701
2018-11-10 19:01:14,087 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2018-11-10 19:01:14,088 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.all.secure_redirects' in directory '/root'
2018-11-10 19:01:14,107 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.all.secure_redirects = 0 is already set
2018-11-10 19:01:14,108 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.all.secure_redirects] at time 19:01:14.108746 duration_in_ms=22.045
2018-11-10 19:01:14,109 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.neigh.default.gc_thresh1] at time 19:01:14.109191
2018-11-10 19:01:14,110 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-11-10 19:01:14,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh1' in directory '/root'
2018-11-10 19:01:14,130 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.neigh.default.gc_thresh1 = 4096 is already set
2018-11-10 19:01:14,131 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 19:01:14.131199 duration_in_ms=22.007
2018-11-10 19:01:14,132 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.neigh.default.gc_thresh2] at time 19:01:14.131684
2018-11-10 19:01:14,132 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-11-10 19:01:14,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh2' in directory '/root'
2018-11-10 19:01:14,155 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.neigh.default.gc_thresh2 = 8192 is already set
2018-11-10 19:01:14,156 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 19:01:14.156812 duration_in_ms=25.128
2018-11-10 19:01:14,157 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.neigh.default.gc_thresh3] at time 19:01:14.157239
2018-11-10 19:01:14,157 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-11-10 19:01:14,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.neigh.default.gc_thresh3' in directory '/root'
2018-11-10 19:01:14,179 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.neigh.default.gc_thresh3 = 16384 is already set
2018-11-10 19:01:14,179 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 19:01:14.179704 duration_in_ms=22.465
2018-11-10 19:01:14,180 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.default.send_redirects] at time 19:01:14.180156
2018-11-10 19:01:14,180 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2018-11-10 19:01:14,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.default.send_redirects' in directory '/root'
2018-11-10 19:01:14,203 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.default.send_redirects = 0 is already set
2018-11-10 19:01:14,204 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.default.send_redirects] at time 19:01:14.203757 duration_in_ms=23.6
2018-11-10 19:01:14,205 [salt.state       :1780][INFO    ][6620] Running state [net.ipv4.conf.all.accept_redirects] at time 19:01:14.205338
2018-11-10 19:01:14,206 [salt.state       :1813][INFO    ][6620] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2018-11-10 19:01:14,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'sysctl -n net.ipv4.conf.all.accept_redirects' in directory '/root'
2018-11-10 19:01:14,231 [salt.state       :300 ][INFO    ][6620] Sysctl value net.ipv4.conf.all.accept_redirects = 0 is already set
2018-11-10 19:01:14,231 [salt.state       :1951][INFO    ][6620] Completed state [net.ipv4.conf.all.accept_redirects] at time 19:01:14.231695 duration_in_ms=26.356
2018-11-10 19:01:14,232 [salt.state       :1780][INFO    ][6620] Running state [linux_sysfs_package] at time 19:01:14.232755
2018-11-10 19:01:14,233 [salt.state       :1813][INFO    ][6620] Executing state pkg.installed for [linux_sysfs_package]
2018-11-10 19:01:14,252 [salt.state       :300 ][INFO    ][6620] All specified packages are already installed
2018-11-10 19:01:14,253 [salt.state       :1951][INFO    ][6620] Completed state [linux_sysfs_package] at time 19:01:14.253162 duration_in_ms=20.407
2018-11-10 19:01:14,256 [salt.state       :1780][INFO    ][6620] Running state [/etc/sysfs.d] at time 19:01:14.256699
2018-11-10 19:01:14,257 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/etc/sysfs.d]
2018-11-10 19:01:14,260 [salt.state       :300 ][INFO    ][6620] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-11-10 19:01:14,260 [salt.state       :1951][INFO    ][6620] Completed state [/etc/sysfs.d] at time 19:01:14.260321 duration_in_ms=3.621
2018-11-10 19:01:14,262 [salt.state       :1780][INFO    ][6620] Running state [/etc/sysfs.d/transparent_hugepages.conf] at time 19:01:14.262511
2018-11-10 19:01:14,262 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/sysfs.d/transparent_hugepages.conf]
2018-11-10 19:01:14,305 [salt.state       :300 ][INFO    ][6620] File /etc/sysfs.d/transparent_hugepages.conf is in the correct state
2018-11-10 19:01:14,305 [salt.state       :1951][INFO    ][6620] Completed state [/etc/sysfs.d/transparent_hugepages.conf] at time 19:01:14.305519 duration_in_ms=43.008
2018-11-10 19:01:14,307 [salt.state       :1780][INFO    ][6620] Running state [sysfs.write] at time 19:01:14.307173
2018-11-10 19:01:14,307 [salt.state       :1813][INFO    ][6620] Executing state module.run for [sysfs.write]
2018-11-10 19:01:14,308 [salt.utils.decorators:613 ][WARNING ][6620] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-10 19:01:14,309 [salt.state       :300 ][INFO    ][6620] {'ret': True}
2018-11-10 19:01:14,310 [salt.state       :1951][INFO    ][6620] Completed state [sysfs.write] at time 19:01:14.309432 duration_in_ms=2.259
2018-11-10 19:01:14,310 [salt.state       :1780][INFO    ][6620] Running state [ondemand] at time 19:01:14.310531
2018-11-10 19:01:14,310 [salt.state       :1813][INFO    ][6620] Executing state service.dead for [ondemand]
2018-11-10 19:01:14,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-11-10 19:01:14,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-10 19:01:14,368 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-10 19:01:14,400 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'runlevel' in directory '/root'
2018-11-10 19:01:14,419 [salt.state       :300 ][INFO    ][6620] The service ondemand is already dead
2018-11-10 19:01:14,420 [salt.state       :1951][INFO    ][6620] Completed state [ondemand] at time 19:01:14.420102 duration_in_ms=109.569
2018-11-10 19:01:14,420 [salt.state       :1780][INFO    ][6620] Running state [en_US.UTF-8] at time 19:01:14.420840
2018-11-10 19:01:14,421 [salt.state       :1813][INFO    ][6620] Executing state locale.present for [en_US.UTF-8]
2018-11-10 19:01:14,424 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'locale -a' in directory '/root'
2018-11-10 19:01:14,439 [salt.state       :300 ][INFO    ][6620] Locale en_US.UTF-8 is already present
2018-11-10 19:01:14,440 [salt.state       :1951][INFO    ][6620] Completed state [en_US.UTF-8] at time 19:01:14.440585 duration_in_ms=19.745
2018-11-10 19:01:14,445 [salt.state       :1780][INFO    ][6620] Running state [en_US.UTF-8] at time 19:01:14.445324
2018-11-10 19:01:14,446 [salt.state       :1813][INFO    ][6620] Executing state locale.system for [en_US.UTF-8]
2018-11-10 19:01:14,447 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'localectl' in directory '/root'
2018-11-10 19:01:14,483 [salt.state       :300 ][INFO    ][6620] System locale en_US.UTF-8 already set
2018-11-10 19:01:14,483 [salt.state       :1951][INFO    ][6620] Completed state [en_US.UTF-8] at time 19:01:14.483468 duration_in_ms=38.143
2018-11-10 19:01:14,484 [salt.state       :1780][INFO    ][6620] Running state [root] at time 19:01:14.484273
2018-11-10 19:01:14,484 [salt.state       :1813][INFO    ][6620] Executing state group.present for [root]
2018-11-10 19:01:14,485 [salt.state       :300 ][INFO    ][6620] Group root is present and up to date
2018-11-10 19:01:14,486 [salt.state       :1951][INFO    ][6620] Completed state [root] at time 19:01:14.486117 duration_in_ms=1.844
2018-11-10 19:01:14,489 [salt.state       :1780][INFO    ][6620] Running state [root] at time 19:01:14.489231
2018-11-10 19:01:14,490 [salt.state       :1813][INFO    ][6620] Executing state user.present for [root]
2018-11-10 19:01:14,491 [salt.state       :300 ][INFO    ][6620] User root is present and up to date
2018-11-10 19:01:14,492 [salt.state       :1951][INFO    ][6620] Completed state [root] at time 19:01:14.492166 duration_in_ms=2.934
2018-11-10 19:01:14,495 [salt.state       :1780][INFO    ][6620] Running state [/root] at time 19:01:14.495604
2018-11-10 19:01:14,496 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/root]
2018-11-10 19:01:14,497 [salt.state       :300 ][INFO    ][6620] Directory /root is in the correct state
Directory /root updated
2018-11-10 19:01:14,497 [salt.state       :1951][INFO    ][6620] Completed state [/root] at time 19:01:14.497833 duration_in_ms=2.229
2018-11-10 19:01:14,498 [salt.state       :1780][INFO    ][6620] Running state [/etc/sudoers.d/90-salt-user-root] at time 19:01:14.498103
2018-11-10 19:01:14,498 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-11-10 19:01:14,498 [salt.state       :300 ][INFO    ][6620] File /etc/sudoers.d/90-salt-user-root is not present
2018-11-10 19:01:14,499 [salt.state       :1951][INFO    ][6620] Completed state [/etc/sudoers.d/90-salt-user-root] at time 19:01:14.499030 duration_in_ms=0.928
2018-11-10 19:01:14,499 [salt.state       :1780][INFO    ][6620] Running state [ubuntu] at time 19:01:14.499309
2018-11-10 19:01:14,499 [salt.state       :1813][INFO    ][6620] Executing state group.present for [ubuntu]
2018-11-10 19:01:14,500 [salt.state       :300 ][INFO    ][6620] Group ubuntu is present and up to date
2018-11-10 19:01:14,500 [salt.state       :1951][INFO    ][6620] Completed state [ubuntu] at time 19:01:14.500499 duration_in_ms=1.19
2018-11-10 19:01:14,501 [salt.state       :1780][INFO    ][6620] Running state [ubuntu] at time 19:01:14.501891
2018-11-10 19:01:14,502 [salt.state       :1813][INFO    ][6620] Executing state user.present for [ubuntu]
2018-11-10 19:01:14,504 [salt.state       :300 ][INFO    ][6620] User ubuntu is present and up to date
2018-11-10 19:01:14,504 [salt.state       :1951][INFO    ][6620] Completed state [ubuntu] at time 19:01:14.504786 duration_in_ms=2.895
2018-11-10 19:01:14,507 [salt.state       :1780][INFO    ][6620] Running state [/home/ubuntu] at time 19:01:14.507276
2018-11-10 19:01:14,507 [salt.state       :1813][INFO    ][6620] Executing state file.directory for [/home/ubuntu]
2018-11-10 19:01:14,508 [salt.state       :300 ][INFO    ][6620] Directory /home/ubuntu is in the correct state
Directory /home/ubuntu updated
2018-11-10 19:01:14,508 [salt.state       :1951][INFO    ][6620] Completed state [/home/ubuntu] at time 19:01:14.508674 duration_in_ms=1.397
2018-11-10 19:01:14,510 [salt.state       :1780][INFO    ][6620] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 19:01:14.510770
2018-11-10 19:01:14,511 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-11-10 19:01:14,541 [salt.state       :300 ][INFO    ][6620] File /etc/sudoers.d/90-salt-user-ubuntu is in the correct state
2018-11-10 19:01:14,541 [salt.state       :1951][INFO    ][6620] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 19:01:14.541582 duration_in_ms=30.811
2018-11-10 19:01:14,541 [salt.state       :1780][INFO    ][6620] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 19:01:14.541880
2018-11-10 19:01:14,542 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2018-11-10 19:01:14,697 [salt.state       :300 ][INFO    ][6620] File /etc/security/limits.d/90-salt-cis.conf is in the correct state
2018-11-10 19:01:14,697 [salt.state       :1951][INFO    ][6620] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 19:01:14.697399 duration_in_ms=155.518
2018-11-10 19:01:14,698 [salt.state       :1780][INFO    ][6620] Running state [/etc/security/limits.d/90-salt-default.conf] at time 19:01:14.697984
2018-11-10 19:01:14,698 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-11-10 19:01:14,867 [salt.state       :300 ][INFO    ][6620] File /etc/security/limits.d/90-salt-default.conf is in the correct state
2018-11-10 19:01:14,867 [salt.state       :1951][INFO    ][6620] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 19:01:14.867566 duration_in_ms=169.581
2018-11-10 19:01:14,868 [salt.state       :1780][INFO    ][6620] Running state [apt-daily.timer] at time 19:01:14.868139
2018-11-10 19:01:14,868 [salt.state       :1813][INFO    ][6620] Executing state service.dead for [apt-daily.timer]
2018-11-10 19:01:14,870 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2018-11-10 19:01:14,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:01:14,928 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-10 19:01:14,955 [salt.state       :300 ][INFO    ][6620] The service apt-daily.timer is already dead
2018-11-10 19:01:14,955 [salt.state       :1951][INFO    ][6620] Completed state [apt-daily.timer] at time 19:01:14.955833 duration_in_ms=87.693
2018-11-10 19:01:14,956 [salt.state       :1780][INFO    ][6620] Running state [autofs] at time 19:01:14.956559
2018-11-10 19:01:14,956 [salt.state       :1813][INFO    ][6620] Executing state service.disabled for [autofs]
2018-11-10 19:01:14,957 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2018-11-10 19:01:14,978 [salt.state       :300 ][INFO    ][6620] The named service autofs is not available
2018-11-10 19:01:14,979 [salt.state       :1951][INFO    ][6620] Completed state [autofs] at time 19:01:14.979268 duration_in_ms=22.709
2018-11-10 19:01:14,979 [salt.state       :1780][INFO    ][6620] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 19:01:14.979709
2018-11-10 19:01:14,980 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-11-10 19:01:15,163 [salt.state       :300 ][INFO    ][6620] File /etc/systemd/system.conf.d/90-salt.conf is in the correct state
2018-11-10 19:01:15,164 [salt.state       :1951][INFO    ][6620] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 19:01:15.163792 duration_in_ms=184.083
2018-11-10 19:01:15,167 [salt.state       :1780][INFO    ][6620] Running state [service.systemctl_reload] at time 19:01:15.167124
2018-11-10 19:01:15,167 [salt.state       :1813][INFO    ][6620] Executing state module.wait for [service.systemctl_reload]
2018-11-10 19:01:15,167 [salt.state       :300 ][INFO    ][6620] No changes made for service.systemctl_reload
2018-11-10 19:01:15,168 [salt.state       :1951][INFO    ][6620] Completed state [service.systemctl_reload] at time 19:01:15.168223 duration_in_ms=1.099
2018-11-10 19:01:15,168 [salt.state       :1780][INFO    ][6620] Running state [/etc/shadow] at time 19:01:15.168465
2018-11-10 19:01:15,168 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/shadow]
2018-11-10 19:01:15,169 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,169 [salt.state       :300 ][INFO    ][6620] File /etc/shadow exists with proper permissions. No changes made.
2018-11-10 19:01:15,170 [salt.state       :1951][INFO    ][6620] Completed state [/etc/shadow] at time 19:01:15.170290 duration_in_ms=1.824
2018-11-10 19:01:15,170 [salt.state       :1780][INFO    ][6620] Running state [/etc/gshadow] at time 19:01:15.170522
2018-11-10 19:01:15,171 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/gshadow]
2018-11-10 19:01:15,171 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,172 [salt.state       :300 ][INFO    ][6620] File /etc/gshadow exists with proper permissions. No changes made.
2018-11-10 19:01:15,172 [salt.state       :1951][INFO    ][6620] Completed state [/etc/gshadow] at time 19:01:15.172531 duration_in_ms=2.009
2018-11-10 19:01:15,172 [salt.state       :1780][INFO    ][6620] Running state [/etc/group-] at time 19:01:15.172789
2018-11-10 19:01:15,173 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/group-]
2018-11-10 19:01:15,173 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,175 [salt.state       :300 ][INFO    ][6620] File /etc/group- exists with proper permissions. No changes made.
2018-11-10 19:01:15,175 [salt.state       :1951][INFO    ][6620] Completed state [/etc/group-] at time 19:01:15.175311 duration_in_ms=2.522
2018-11-10 19:01:15,175 [salt.state       :1780][INFO    ][6620] Running state [/etc/shadow-] at time 19:01:15.175548
2018-11-10 19:01:15,175 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/shadow-]
2018-11-10 19:01:15,176 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,177 [salt.state       :300 ][INFO    ][6620] File /etc/shadow- exists with proper permissions. No changes made.
2018-11-10 19:01:15,177 [salt.state       :1951][INFO    ][6620] Completed state [/etc/shadow-] at time 19:01:15.177826 duration_in_ms=2.278
2018-11-10 19:01:15,178 [salt.state       :1780][INFO    ][6620] Running state [/etc/passwd-] at time 19:01:15.178351
2018-11-10 19:01:15,179 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/passwd-]
2018-11-10 19:01:15,179 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,180 [salt.state       :300 ][INFO    ][6620] File /etc/passwd- exists with proper permissions. No changes made.
2018-11-10 19:01:15,180 [salt.state       :1951][INFO    ][6620] Completed state [/etc/passwd-] at time 19:01:15.180546 duration_in_ms=2.196
2018-11-10 19:01:15,180 [salt.state       :1780][INFO    ][6620] Running state [/etc/passwd] at time 19:01:15.180807
2018-11-10 19:01:15,181 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/passwd]
2018-11-10 19:01:15,181 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,183 [salt.state       :300 ][INFO    ][6620] File /etc/passwd exists with proper permissions. No changes made.
2018-11-10 19:01:15,183 [salt.state       :1951][INFO    ][6620] Completed state [/etc/passwd] at time 19:01:15.183743 duration_in_ms=2.935
2018-11-10 19:01:15,184 [salt.state       :1780][INFO    ][6620] Running state [/etc/gshadow-] at time 19:01:15.184389
2018-11-10 19:01:15,184 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/gshadow-]
2018-11-10 19:01:15,185 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,186 [salt.state       :300 ][INFO    ][6620] File /etc/gshadow- exists with proper permissions. No changes made.
2018-11-10 19:01:15,186 [salt.state       :1951][INFO    ][6620] Completed state [/etc/gshadow-] at time 19:01:15.186703 duration_in_ms=2.313
2018-11-10 19:01:15,187 [salt.state       :1780][INFO    ][6620] Running state [/etc/group] at time 19:01:15.187234
2018-11-10 19:01:15,187 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/group]
2018-11-10 19:01:15,187 [salt.loaded.int.states.file:2298][WARNING ][6620] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-10 19:01:15,188 [salt.state       :300 ][INFO    ][6620] File /etc/group exists with proper permissions. No changes made.
2018-11-10 19:01:15,188 [salt.state       :1951][INFO    ][6620] Completed state [/etc/group] at time 19:01:15.188684 duration_in_ms=1.45
2018-11-10 19:01:15,188 [salt.state       :1780][INFO    ][6620] Running state [/etc/issue] at time 19:01:15.188929
2018-11-10 19:01:15,189 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/issue]
2018-11-10 19:01:15,191 [salt.state       :300 ][INFO    ][6620] File /etc/issue is in the correct state
2018-11-10 19:01:15,191 [salt.state       :1951][INFO    ][6620] Completed state [/etc/issue] at time 19:01:15.191405 duration_in_ms=2.476
2018-11-10 19:01:15,192 [salt.state       :1780][INFO    ][6620] Running state [/etc/hostname] at time 19:01:15.192485
2018-11-10 19:01:15,192 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/hostname]
2018-11-10 19:01:15,218 [salt.state       :300 ][INFO    ][6620] File /etc/hostname is in the correct state
2018-11-10 19:01:15,218 [salt.state       :1951][INFO    ][6620] Completed state [/etc/hostname] at time 19:01:15.218468 duration_in_ms=25.983
2018-11-10 19:01:15,220 [salt.state       :1780][INFO    ][6620] Running state [hostname mdb03] at time 19:01:15.220171
2018-11-10 19:01:15,220 [salt.state       :1813][INFO    ][6620] Executing state cmd.run for [hostname mdb03]
2018-11-10 19:01:15,222 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'test "$(hostname)" = "mdb03"' in directory '/root'
2018-11-10 19:01:15,241 [salt.state       :300 ][INFO    ][6620] unless execution succeeded
2018-11-10 19:01:15,242 [salt.state       :1951][INFO    ][6620] Completed state [hostname mdb03] at time 19:01:15.242364 duration_in_ms=22.193
2018-11-10 19:01:15,243 [salt.state       :1780][INFO    ][6620] Running state [mdb02] at time 19:01:15.243392
2018-11-10 19:01:15,243 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb02]
2018-11-10 19:01:15,244 [salt.state       :300 ][INFO    ][6620] Host mdb02 (192.168.10.33) already present
2018-11-10 19:01:15,245 [salt.state       :1951][INFO    ][6620] Completed state [mdb02] at time 19:01:15.245046 duration_in_ms=1.655
2018-11-10 19:01:15,245 [salt.state       :1780][INFO    ][6620] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 19:01:15.245430
2018-11-10 19:01:15,246 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,247 [salt.state       :300 ][INFO    ][6620] Host mdb02.mcp-ovs-dpdk-ha.local (192.168.10.33) already present
2018-11-10 19:01:15,247 [salt.state       :1951][INFO    ][6620] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 19:01:15.247418 duration_in_ms=1.987
2018-11-10 19:01:15,248 [salt.state       :1780][INFO    ][6620] Running state [mdb03] at time 19:01:15.247794
2018-11-10 19:01:15,248 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb03]
2018-11-10 19:01:15,249 [salt.state       :300 ][INFO    ][6620] Host mdb03 (192.168.10.34) already present
2018-11-10 19:01:15,250 [salt.state       :1951][INFO    ][6620] Completed state [mdb03] at time 19:01:15.250047 duration_in_ms=2.253
2018-11-10 19:01:15,250 [salt.state       :1780][INFO    ][6620] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 19:01:15.250431
2018-11-10 19:01:15,250 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,251 [salt.state       :300 ][INFO    ][6620] Host mdb03.mcp-ovs-dpdk-ha.local (192.168.10.34) already present
2018-11-10 19:01:15,251 [salt.state       :1951][INFO    ][6620] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 19:01:15.251449 duration_in_ms=1.018
2018-11-10 19:01:15,254 [salt.state       :1780][INFO    ][6620] Running state [file.replace] at time 19:01:15.254538
2018-11-10 19:01:15,255 [salt.state       :1813][INFO    ][6620] Executing state module.run for [file.replace]
2018-11-10 19:01:15,267 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'grep -q "mdb03 mdb03.mcp-ovs-dpdk-ha.local" /etc/hosts' in directory '/root'
2018-11-10 19:01:15,286 [salt.utils.decorators:613 ][WARNING ][6620] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-10 19:01:15,292 [salt.state       :300 ][INFO    ][6620] {'ret': '--- \n+++ \n@@ -7,7 +7,7 @@\n ff02::2\t\tip6-allrouters\n ff02::3\t\tip6-allhosts\n 192.168.10.33\t\tmdb02 mdb02.mcp-ovs-dpdk-ha.local\n-192.168.10.34\t\tmdb03 mdb03.mcp-ovs-dpdk-ha.local\n+192.168.10.34\t\tmdb03.mcp-ovs-dpdk-ha.local mdb03\n 192.168.10.32\t\tmdb01 mdb01.mcp-ovs-dpdk-ha.local\n 192.168.10.31\t\tmdb mdb.mcp-ovs-dpdk-ha.local\n 192.168.10.11\t\tcfg01 cfg01.mcp-ovs-dpdk-ha.local\n'}
2018-11-10 19:01:15,292 [salt.state       :1951][INFO    ][6620] Completed state [file.replace] at time 19:01:15.292517 duration_in_ms=37.979
2018-11-10 19:01:15,293 [salt.state       :1780][INFO    ][6620] Running state [mdb01] at time 19:01:15.293254
2018-11-10 19:01:15,293 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb01]
2018-11-10 19:01:15,294 [salt.state       :300 ][INFO    ][6620] Host mdb01 (192.168.10.32) already present
2018-11-10 19:01:15,294 [salt.state       :1951][INFO    ][6620] Completed state [mdb01] at time 19:01:15.294839 duration_in_ms=1.585
2018-11-10 19:01:15,295 [salt.state       :1780][INFO    ][6620] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 19:01:15.295229
2018-11-10 19:01:15,295 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,296 [salt.state       :300 ][INFO    ][6620] Host mdb01.mcp-ovs-dpdk-ha.local (192.168.10.32) already present
2018-11-10 19:01:15,297 [salt.state       :1951][INFO    ][6620] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 19:01:15.297170 duration_in_ms=1.941
2018-11-10 19:01:15,298 [salt.state       :1780][INFO    ][6620] Running state [mdb] at time 19:01:15.298417
2018-11-10 19:01:15,298 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb]
2018-11-10 19:01:15,299 [salt.state       :300 ][INFO    ][6620] Host mdb (192.168.10.31) already present
2018-11-10 19:01:15,299 [salt.state       :1951][INFO    ][6620] Completed state [mdb] at time 19:01:15.299722 duration_in_ms=1.305
2018-11-10 19:01:15,300 [salt.state       :1780][INFO    ][6620] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 19:01:15.300090
2018-11-10 19:01:15,300 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,301 [salt.state       :300 ][INFO    ][6620] Host mdb.mcp-ovs-dpdk-ha.local (192.168.10.31) already present
2018-11-10 19:01:15,301 [salt.state       :1951][INFO    ][6620] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 19:01:15.301392 duration_in_ms=1.302
2018-11-10 19:01:15,301 [salt.state       :1780][INFO    ][6620] Running state [cfg01] at time 19:01:15.301777
2018-11-10 19:01:15,302 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cfg01]
2018-11-10 19:01:15,303 [salt.state       :300 ][INFO    ][6620] Host cfg01 (192.168.10.11) already present
2018-11-10 19:01:15,303 [salt.state       :1951][INFO    ][6620] Completed state [cfg01] at time 19:01:15.303297 duration_in_ms=1.52
2018-11-10 19:01:15,303 [salt.state       :1780][INFO    ][6620] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:01:15.303665
2018-11-10 19:01:15,304 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,304 [salt.state       :300 ][INFO    ][6620] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2018-11-10 19:01:15,304 [salt.state       :1951][INFO    ][6620] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:01:15.304947 duration_in_ms=1.282
2018-11-10 19:01:15,305 [salt.state       :1780][INFO    ][6620] Running state [prx01] at time 19:01:15.305313
2018-11-10 19:01:15,305 [salt.state       :1813][INFO    ][6620] Executing state host.present for [prx01]
2018-11-10 19:01:15,306 [salt.state       :300 ][INFO    ][6620] Host prx01 (192.168.10.14) already present
2018-11-10 19:01:15,306 [salt.state       :1951][INFO    ][6620] Completed state [prx01] at time 19:01:15.306588 duration_in_ms=1.275
2018-11-10 19:01:15,307 [salt.state       :1780][INFO    ][6620] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 19:01:15.306958
2018-11-10 19:01:15,307 [salt.state       :1813][INFO    ][6620] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,308 [salt.state       :300 ][INFO    ][6620] Host prx01.mcp-ovs-dpdk-ha.local (192.168.10.14) already present
2018-11-10 19:01:15,308 [salt.state       :1951][INFO    ][6620] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 19:01:15.308235 duration_in_ms=1.277
2018-11-10 19:01:15,308 [salt.state       :1780][INFO    ][6620] Running state [kvm01] at time 19:01:15.308615
2018-11-10 19:01:15,308 [salt.state       :1813][INFO    ][6620] Executing state host.present for [kvm01]
2018-11-10 19:01:15,310 [salt.state       :300 ][INFO    ][6620] Host kvm01 (192.168.10.20) already present
2018-11-10 19:01:15,310 [salt.state       :1951][INFO    ][6620] Completed state [kvm01] at time 19:01:15.310221 duration_in_ms=1.606
2018-11-10 19:01:15,310 [salt.state       :1780][INFO    ][6620] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 19:01:15.310883
2018-11-10 19:01:15,311 [salt.state       :1813][INFO    ][6620] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,311 [salt.state       :300 ][INFO    ][6620] Host kvm01.mcp-ovs-dpdk-ha.local (192.168.10.20) already present
2018-11-10 19:01:15,311 [salt.state       :1951][INFO    ][6620] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 19:01:15.311863 duration_in_ms=0.98
2018-11-10 19:01:15,312 [salt.state       :1780][INFO    ][6620] Running state [kvm03] at time 19:01:15.312518
2018-11-10 19:01:15,313 [salt.state       :1813][INFO    ][6620] Executing state host.present for [kvm03]
2018-11-10 19:01:15,313 [salt.state       :300 ][INFO    ][6620] Host kvm03 (192.168.10.22) already present
2018-11-10 19:01:15,314 [salt.state       :1951][INFO    ][6620] Completed state [kvm03] at time 19:01:15.314124 duration_in_ms=1.607
2018-11-10 19:01:15,315 [salt.state       :1780][INFO    ][6620] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 19:01:15.315041
2018-11-10 19:01:15,315 [salt.state       :1813][INFO    ][6620] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,316 [salt.state       :300 ][INFO    ][6620] Host kvm03.mcp-ovs-dpdk-ha.local (192.168.10.22) already present
2018-11-10 19:01:15,316 [salt.state       :1951][INFO    ][6620] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 19:01:15.316285 duration_in_ms=1.244
2018-11-10 19:01:15,316 [salt.state       :1780][INFO    ][6620] Running state [kvm02] at time 19:01:15.316693
2018-11-10 19:01:15,316 [salt.state       :1813][INFO    ][6620] Executing state host.present for [kvm02]
2018-11-10 19:01:15,317 [salt.state       :300 ][INFO    ][6620] Host kvm02 (192.168.10.21) already present
2018-11-10 19:01:15,318 [salt.state       :1951][INFO    ][6620] Completed state [kvm02] at time 19:01:15.318124 duration_in_ms=1.431
2018-11-10 19:01:15,318 [salt.state       :1780][INFO    ][6620] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 19:01:15.318776
2018-11-10 19:01:15,319 [salt.state       :1813][INFO    ][6620] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,319 [salt.state       :300 ][INFO    ][6620] Host kvm02.mcp-ovs-dpdk-ha.local (192.168.10.21) already present
2018-11-10 19:01:15,319 [salt.state       :1951][INFO    ][6620] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 19:01:15.319753 duration_in_ms=0.977
2018-11-10 19:01:15,320 [salt.state       :1780][INFO    ][6620] Running state [dbs] at time 19:01:15.320411
2018-11-10 19:01:15,320 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs]
2018-11-10 19:01:15,321 [salt.state       :300 ][INFO    ][6620] Host dbs (192.168.10.23) already present
2018-11-10 19:01:15,321 [salt.state       :1951][INFO    ][6620] Completed state [dbs] at time 19:01:15.321395 duration_in_ms=0.984
2018-11-10 19:01:15,322 [salt.state       :1780][INFO    ][6620] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 19:01:15.322063
2018-11-10 19:01:15,322 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,323 [salt.state       :300 ][INFO    ][6620] Host dbs.mcp-ovs-dpdk-ha.local (192.168.10.23) already present
2018-11-10 19:01:15,323 [salt.state       :1951][INFO    ][6620] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 19:01:15.323847 duration_in_ms=1.784
2018-11-10 19:01:15,324 [salt.state       :1780][INFO    ][6620] Running state [prx] at time 19:01:15.324228
2018-11-10 19:01:15,324 [salt.state       :1813][INFO    ][6620] Executing state host.present for [prx]
2018-11-10 19:01:15,325 [salt.state       :300 ][INFO    ][6620] Host prx (192.168.10.13) already present
2018-11-10 19:01:15,325 [salt.state       :1951][INFO    ][6620] Completed state [prx] at time 19:01:15.325804 duration_in_ms=1.576
2018-11-10 19:01:15,326 [salt.state       :1780][INFO    ][6620] Running state [prx.mcp-ovs-dpdk-ha.local] at time 19:01:15.326180
2018-11-10 19:01:15,326 [salt.state       :1813][INFO    ][6620] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,327 [salt.state       :300 ][INFO    ][6620] Host prx.mcp-ovs-dpdk-ha.local (192.168.10.13) already present
2018-11-10 19:01:15,327 [salt.state       :1951][INFO    ][6620] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 19:01:15.327417 duration_in_ms=1.237
2018-11-10 19:01:15,327 [salt.state       :1780][INFO    ][6620] Running state [prx02] at time 19:01:15.327815
2018-11-10 19:01:15,328 [salt.state       :1813][INFO    ][6620] Executing state host.present for [prx02]
2018-11-10 19:01:15,328 [salt.state       :300 ][INFO    ][6620] Host prx02 (192.168.10.15) already present
2018-11-10 19:01:15,328 [salt.state       :1951][INFO    ][6620] Completed state [prx02] at time 19:01:15.328801 duration_in_ms=0.986
2018-11-10 19:01:15,329 [salt.state       :1780][INFO    ][6620] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 19:01:15.329178
2018-11-10 19:01:15,329 [salt.state       :1813][INFO    ][6620] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,329 [salt.state       :300 ][INFO    ][6620] Host prx02.mcp-ovs-dpdk-ha.local (192.168.10.15) already present
2018-11-10 19:01:15,330 [salt.state       :1951][INFO    ][6620] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 19:01:15.330164 duration_in_ms=0.986
2018-11-10 19:01:15,330 [salt.state       :1780][INFO    ][6620] Running state [msg02] at time 19:01:15.330544
2018-11-10 19:01:15,330 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg02]
2018-11-10 19:01:15,331 [salt.state       :300 ][INFO    ][6620] Host msg02 (192.168.10.29) already present
2018-11-10 19:01:15,331 [salt.state       :1951][INFO    ][6620] Completed state [msg02] at time 19:01:15.331486 duration_in_ms=0.941
2018-11-10 19:01:15,332 [salt.state       :1780][INFO    ][6620] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 19:01:15.332416
2018-11-10 19:01:15,332 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,333 [salt.state       :300 ][INFO    ][6620] Host msg02.mcp-ovs-dpdk-ha.local (192.168.10.29) already present
2018-11-10 19:01:15,333 [salt.state       :1951][INFO    ][6620] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 19:01:15.333393 duration_in_ms=0.977
2018-11-10 19:01:15,334 [salt.state       :1780][INFO    ][6620] Running state [msg03] at time 19:01:15.334090
2018-11-10 19:01:15,334 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg03]
2018-11-10 19:01:15,335 [salt.state       :300 ][INFO    ][6620] Host msg03 (192.168.10.30) already present
2018-11-10 19:01:15,335 [salt.state       :1951][INFO    ][6620] Completed state [msg03] at time 19:01:15.335591 duration_in_ms=1.501
2018-11-10 19:01:15,336 [salt.state       :1780][INFO    ][6620] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 19:01:15.335974
2018-11-10 19:01:15,336 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,336 [salt.state       :300 ][INFO    ][6620] Host msg03.mcp-ovs-dpdk-ha.local (192.168.10.30) already present
2018-11-10 19:01:15,336 [salt.state       :1951][INFO    ][6620] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 19:01:15.336940 duration_in_ms=0.966
2018-11-10 19:01:15,337 [salt.state       :1780][INFO    ][6620] Running state [msg01] at time 19:01:15.337326
2018-11-10 19:01:15,337 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg01]
2018-11-10 19:01:15,338 [salt.state       :300 ][INFO    ][6620] Host msg01 (192.168.10.28) already present
2018-11-10 19:01:15,338 [salt.state       :1951][INFO    ][6620] Completed state [msg01] at time 19:01:15.338561 duration_in_ms=1.235
2018-11-10 19:01:15,338 [salt.state       :1780][INFO    ][6620] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 19:01:15.338946
2018-11-10 19:01:15,339 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,339 [salt.state       :300 ][INFO    ][6620] Host msg01.mcp-ovs-dpdk-ha.local (192.168.10.28) already present
2018-11-10 19:01:15,340 [salt.state       :1951][INFO    ][6620] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 19:01:15.340170 duration_in_ms=1.224
2018-11-10 19:01:15,340 [salt.state       :1780][INFO    ][6620] Running state [msg] at time 19:01:15.340870
2018-11-10 19:01:15,341 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg]
2018-11-10 19:01:15,341 [salt.state       :300 ][INFO    ][6620] Host msg (192.168.10.27) already present
2018-11-10 19:01:15,341 [salt.state       :1951][INFO    ][6620] Completed state [msg] at time 19:01:15.341843 duration_in_ms=0.973
2018-11-10 19:01:15,342 [salt.state       :1780][INFO    ][6620] Running state [msg.mcp-ovs-dpdk-ha.local] at time 19:01:15.342220
2018-11-10 19:01:15,342 [salt.state       :1813][INFO    ][6620] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,342 [salt.state       :300 ][INFO    ][6620] Host msg.mcp-ovs-dpdk-ha.local (192.168.10.27) already present
2018-11-10 19:01:15,343 [salt.state       :1951][INFO    ][6620] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 19:01:15.343151 duration_in_ms=0.931
2018-11-10 19:01:15,343 [salt.state       :1780][INFO    ][6620] Running state [cfg01] at time 19:01:15.343539
2018-11-10 19:01:15,343 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cfg01]
2018-11-10 19:01:15,344 [salt.state       :300 ][INFO    ][6620] Host cfg01 (192.168.10.11) already present
2018-11-10 19:01:15,344 [salt.state       :1951][INFO    ][6620] Completed state [cfg01] at time 19:01:15.344469 duration_in_ms=0.93
2018-11-10 19:01:15,344 [salt.state       :1780][INFO    ][6620] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:01:15.344873
2018-11-10 19:01:15,345 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,345 [salt.state       :300 ][INFO    ][6620] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2018-11-10 19:01:15,345 [salt.state       :1951][INFO    ][6620] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 19:01:15.345820 duration_in_ms=0.947
2018-11-10 19:01:15,346 [salt.state       :1780][INFO    ][6620] Running state [cmp002] at time 19:01:15.346214
2018-11-10 19:01:15,346 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cmp002]
2018-11-10 19:01:15,347 [salt.state       :300 ][INFO    ][6620] Host cmp002 (192.168.10.56) already present
2018-11-10 19:01:15,347 [salt.state       :1951][INFO    ][6620] Completed state [cmp002] at time 19:01:15.347474 duration_in_ms=1.261
2018-11-10 19:01:15,347 [salt.state       :1780][INFO    ][6620] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 19:01:15.347872
2018-11-10 19:01:15,348 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,348 [salt.state       :300 ][INFO    ][6620] Host cmp002.mcp-ovs-dpdk-ha.local (192.168.10.56) already present
2018-11-10 19:01:15,349 [salt.state       :1951][INFO    ][6620] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 19:01:15.349107 duration_in_ms=1.236
2018-11-10 19:01:15,349 [salt.state       :1780][INFO    ][6620] Running state [cmp001] at time 19:01:15.349804
2018-11-10 19:01:15,350 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cmp001]
2018-11-10 19:01:15,350 [salt.state       :300 ][INFO    ][6620] Host cmp001 (192.168.10.55) already present
2018-11-10 19:01:15,350 [salt.state       :1951][INFO    ][6620] Completed state [cmp001] at time 19:01:15.350759 duration_in_ms=0.955
2018-11-10 19:01:15,351 [salt.state       :1780][INFO    ][6620] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 19:01:15.351441
2018-11-10 19:01:15,351 [salt.state       :1813][INFO    ][6620] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,352 [salt.state       :300 ][INFO    ][6620] Host cmp001.mcp-ovs-dpdk-ha.local (192.168.10.55) already present
2018-11-10 19:01:15,352 [salt.state       :1951][INFO    ][6620] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 19:01:15.352392 duration_in_ms=0.951
2018-11-10 19:01:15,352 [salt.state       :1780][INFO    ][6620] Running state [dbs01] at time 19:01:15.352806
2018-11-10 19:01:15,353 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs01]
2018-11-10 19:01:15,353 [salt.state       :300 ][INFO    ][6620] Host dbs01 (192.168.10.24) already present
2018-11-10 19:01:15,353 [salt.state       :1951][INFO    ][6620] Completed state [dbs01] at time 19:01:15.353780 duration_in_ms=0.973
2018-11-10 19:01:15,354 [salt.state       :1780][INFO    ][6620] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 19:01:15.354170
2018-11-10 19:01:15,354 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,355 [salt.state       :300 ][INFO    ][6620] Host dbs01.mcp-ovs-dpdk-ha.local (192.168.10.24) already present
2018-11-10 19:01:15,355 [salt.state       :1951][INFO    ][6620] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 19:01:15.355392 duration_in_ms=1.222
2018-11-10 19:01:15,355 [salt.state       :1780][INFO    ][6620] Running state [dbs02] at time 19:01:15.355787
2018-11-10 19:01:15,356 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs02]
2018-11-10 19:01:15,356 [salt.state       :300 ][INFO    ][6620] Host dbs02 (192.168.10.25) already present
2018-11-10 19:01:15,356 [salt.state       :1951][INFO    ][6620] Completed state [dbs02] at time 19:01:15.356769 duration_in_ms=0.982
2018-11-10 19:01:15,357 [salt.state       :1780][INFO    ][6620] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 19:01:15.357163
2018-11-10 19:01:15,357 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,358 [salt.state       :300 ][INFO    ][6620] Host dbs02.mcp-ovs-dpdk-ha.local (192.168.10.25) already present
2018-11-10 19:01:15,358 [salt.state       :1951][INFO    ][6620] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 19:01:15.358563 duration_in_ms=1.4
2018-11-10 19:01:15,359 [salt.state       :1780][INFO    ][6620] Running state [dbs03] at time 19:01:15.358980
2018-11-10 19:01:15,359 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs03]
2018-11-10 19:01:15,360 [salt.state       :300 ][INFO    ][6620] Host dbs03 (192.168.10.26) already present
2018-11-10 19:01:15,360 [salt.state       :1951][INFO    ][6620] Completed state [dbs03] at time 19:01:15.360213 duration_in_ms=1.233
2018-11-10 19:01:15,360 [salt.state       :1780][INFO    ][6620] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 19:01:15.360605
2018-11-10 19:01:15,360 [salt.state       :1813][INFO    ][6620] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,361 [salt.state       :300 ][INFO    ][6620] Host dbs03.mcp-ovs-dpdk-ha.local (192.168.10.26) already present
2018-11-10 19:01:15,361 [salt.state       :1951][INFO    ][6620] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 19:01:15.361591 duration_in_ms=0.986
2018-11-10 19:01:15,362 [salt.state       :1780][INFO    ][6620] Running state [mas01] at time 19:01:15.361985
2018-11-10 19:01:15,362 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mas01]
2018-11-10 19:01:15,362 [salt.state       :300 ][INFO    ][6620] Host mas01 (192.168.10.12) already present
2018-11-10 19:01:15,362 [salt.state       :1951][INFO    ][6620] Completed state [mas01] at time 19:01:15.362916 duration_in_ms=0.931
2018-11-10 19:01:15,363 [salt.state       :1780][INFO    ][6620] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 19:01:15.363309
2018-11-10 19:01:15,363 [salt.state       :1813][INFO    ][6620] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,364 [salt.state       :300 ][INFO    ][6620] Host mas01.mcp-ovs-dpdk-ha.local (192.168.10.12) already present
2018-11-10 19:01:15,364 [salt.state       :1951][INFO    ][6620] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 19:01:15.364241 duration_in_ms=0.932
2018-11-10 19:01:15,364 [salt.state       :1780][INFO    ][6620] Running state [ctl02] at time 19:01:15.364662
2018-11-10 19:01:15,365 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl02]
2018-11-10 19:01:15,366 [salt.state       :300 ][INFO    ][6620] Host ctl02 (192.168.10.37) already present
2018-11-10 19:01:15,366 [salt.state       :1951][INFO    ][6620] Completed state [ctl02] at time 19:01:15.366189 duration_in_ms=1.527
2018-11-10 19:01:15,366 [salt.state       :1780][INFO    ][6620] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 19:01:15.366584
2018-11-10 19:01:15,366 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,367 [salt.state       :300 ][INFO    ][6620] Host ctl02.mcp-ovs-dpdk-ha.local (192.168.10.37) already present
2018-11-10 19:01:15,367 [salt.state       :1951][INFO    ][6620] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 19:01:15.367518 duration_in_ms=0.934
2018-11-10 19:01:15,368 [salt.state       :1780][INFO    ][6620] Running state [ctl03] at time 19:01:15.368216
2018-11-10 19:01:15,368 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl03]
2018-11-10 19:01:15,369 [salt.state       :300 ][INFO    ][6620] Host ctl03 (192.168.10.38) already present
2018-11-10 19:01:15,369 [salt.state       :1951][INFO    ][6620] Completed state [ctl03] at time 19:01:15.369177 duration_in_ms=0.961
2018-11-10 19:01:15,369 [salt.state       :1780][INFO    ][6620] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 19:01:15.369592
2018-11-10 19:01:15,369 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,370 [salt.state       :300 ][INFO    ][6620] Host ctl03.mcp-ovs-dpdk-ha.local (192.168.10.38) already present
2018-11-10 19:01:15,370 [salt.state       :1951][INFO    ][6620] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 19:01:15.370831 duration_in_ms=1.239
2018-11-10 19:01:15,371 [salt.state       :1780][INFO    ][6620] Running state [ctl01] at time 19:01:15.371232
2018-11-10 19:01:15,371 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl01]
2018-11-10 19:01:15,371 [salt.state       :300 ][INFO    ][6620] Host ctl01 (192.168.10.36) already present
2018-11-10 19:01:15,372 [salt.state       :1951][INFO    ][6620] Completed state [ctl01] at time 19:01:15.372167 duration_in_ms=0.936
2018-11-10 19:01:15,372 [salt.state       :1780][INFO    ][6620] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 19:01:15.372566
2018-11-10 19:01:15,372 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,373 [salt.state       :300 ][INFO    ][6620] Host ctl01.mcp-ovs-dpdk-ha.local (192.168.10.36) already present
2018-11-10 19:01:15,373 [salt.state       :1951][INFO    ][6620] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 19:01:15.373551 duration_in_ms=0.984
2018-11-10 19:01:15,373 [salt.state       :1780][INFO    ][6620] Running state [ctl] at time 19:01:15.373947
2018-11-10 19:01:15,374 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl]
2018-11-10 19:01:15,374 [salt.state       :300 ][INFO    ][6620] Host ctl (192.168.10.35) already present
2018-11-10 19:01:15,374 [salt.state       :1951][INFO    ][6620] Completed state [ctl] at time 19:01:15.374879 duration_in_ms=0.932
2018-11-10 19:01:15,375 [salt.state       :1780][INFO    ][6620] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 19:01:15.375277
2018-11-10 19:01:15,375 [salt.state       :1813][INFO    ][6620] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2018-11-10 19:01:15,376 [salt.state       :300 ][INFO    ][6620] Host ctl.mcp-ovs-dpdk-ha.local (192.168.10.35) already present
2018-11-10 19:01:15,376 [salt.state       :1951][INFO    ][6620] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 19:01:15.376829 duration_in_ms=1.552
2018-11-10 19:01:15,377 [salt.state       :1780][INFO    ][6620] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 19:01:15.377073
2018-11-10 19:01:15,377 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-11-10 19:01:15,377 [salt.state       :300 ][INFO    ][6620] File /etc/network/interfaces.d/50-cloud-init.cfg is not present
2018-11-10 19:01:15,377 [salt.state       :1951][INFO    ][6620] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 19:01:15.377872 duration_in_ms=0.799
2018-11-10 19:01:15,378 [salt.state       :1780][INFO    ][6620] Running state [ens3] at time 19:01:15.378123
2018-11-10 19:01:15,378 [salt.state       :1813][INFO    ][6620] Executing state network.managed for [ens3]
2018-11-10 19:01:15,583 [salt.state       :300 ][INFO    ][6620] Interface ens3 is up to date.
2018-11-10 19:01:15,584 [salt.state       :1951][INFO    ][6620] Completed state [ens3] at time 19:01:15.584207 duration_in_ms=206.083
2018-11-10 19:01:15,585 [salt.state       :1780][INFO    ][6620] Running state [ens2] at time 19:01:15.584686
2018-11-10 19:01:15,585 [salt.state       :1813][INFO    ][6620] Executing state network.managed for [ens2]
2018-11-10 19:01:15,628 [salt.state       :300 ][INFO    ][6620] Interface ens2 is up to date.
2018-11-10 19:01:15,629 [salt.state       :1951][INFO    ][6620] Completed state [ens2] at time 19:01:15.629009 duration_in_ms=44.322
2018-11-10 19:01:15,630 [salt.state       :1780][INFO    ][6620] Running state [linux_system_network] at time 19:01:15.629462
2018-11-10 19:01:15,631 [salt.state       :1813][INFO    ][6620] Executing state network.system for [linux_system_network]
2018-11-10 19:01:15,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-11-10 19:01:15,663 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-11-10 19:01:15,701 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-11-10 19:01:15,733 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-11-10 19:01:16,320 [salt.loaded.int.module.debian_ip:1964][WARNING ][6620] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-11-10 19:01:16,320 [salt.state       :300 ][INFO    ][6620] {'network_settings': u'--- \n+++ \n@@ -1,3 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb03\n\n DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2018-11-10 19:01:16,321 [salt.state       :1951][INFO    ][6620] Completed state [linux_system_network] at time 19:01:16.321106 duration_in_ms=691.645
2018-11-10 19:01:16,321 [salt.state       :1780][INFO    ][6620] Running state [/etc/profile.d/proxy.sh] at time 19:01:16.321837
2018-11-10 19:01:16,322 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-11-10 19:01:16,322 [salt.state       :300 ][INFO    ][6620] File /etc/profile.d/proxy.sh is not present
2018-11-10 19:01:16,323 [salt.state       :1951][INFO    ][6620] Completed state [/etc/profile.d/proxy.sh] at time 19:01:16.323050 duration_in_ms=1.213
2018-11-10 19:01:16,323 [salt.state       :1780][INFO    ][6620] Running state [/etc/apt/apt.conf.d/95proxies] at time 19:01:16.323319
2018-11-10 19:01:16,323 [salt.state       :1813][INFO    ][6620] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-11-10 19:01:16,324 [salt.state       :300 ][INFO    ][6620] File /etc/apt/apt.conf.d/95proxies is not present
2018-11-10 19:01:16,324 [salt.state       :1951][INFO    ][6620] Completed state [/etc/apt/apt.conf.d/95proxies] at time 19:01:16.324396 duration_in_ms=1.077
2018-11-10 19:01:16,327 [salt.state       :1780][INFO    ][6620] Running state [/dev/shm] at time 19:01:16.327147
2018-11-10 19:01:16,327 [salt.state       :1813][INFO    ][6620] Executing state mount.mounted for [/dev/shm]
2018-11-10 19:01:16,328 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'mount -l' in directory '/root'
2018-11-10 19:01:16,352 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'blkid' in directory '/root'
2018-11-10 19:01:16,382 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'mount -l' in directory '/root'
2018-11-10 19:01:16,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'umount /dev/shm' in directory '/root'
2018-11-10 19:01:16,439 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][6620] Command '['umount', '/dev/shm']' failed with return code: 32
2018-11-10 19:01:16,440 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][6620] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2018-11-10 19:01:16,440 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][6620] retcode: 32
2018-11-10 19:01:16,443 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'mount -l' in directory '/root'
2018-11-10 19:01:16,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command 'blkid' in directory '/root'
2018-11-10 19:01:16,489 [salt.state       :300 ][INFO    ][6620] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2018-11-10 19:01:16,490 [salt.state       :1951][INFO    ][6620] Completed state [/dev/shm] at time 19:01:16.489944 duration_in_ms=162.796
2018-11-10 19:01:16,490 [salt.state       :1780][INFO    ][6620] Running state [ntp] at time 19:01:16.490677
2018-11-10 19:01:16,491 [salt.state       :1813][INFO    ][6620] Executing state pkg.installed for [ntp]
2018-11-10 19:01:16,510 [salt.state       :300 ][INFO    ][6620] All specified packages are already installed
2018-11-10 19:01:16,510 [salt.state       :1951][INFO    ][6620] Completed state [ntp] at time 19:01:16.510693 duration_in_ms=20.016
2018-11-10 19:01:16,515 [salt.state       :1780][INFO    ][6620] Running state [/etc/ntp.conf] at time 19:01:16.515111
2018-11-10 19:01:16,515 [salt.state       :1813][INFO    ][6620] Executing state file.managed for [/etc/ntp.conf]
2018-11-10 19:01:16,623 [salt.state       :300 ][INFO    ][6620] File /etc/ntp.conf is in the correct state
2018-11-10 19:01:16,623 [salt.state       :1951][INFO    ][6620] Completed state [/etc/ntp.conf] at time 19:01:16.623915 duration_in_ms=108.803
2018-11-10 19:01:16,626 [salt.state       :1780][INFO    ][6620] Running state [ntp] at time 19:01:16.626140
2018-11-10 19:01:16,626 [salt.state       :1813][INFO    ][6620] Executing state service.running for [ntp]
2018-11-10 19:01:16,627 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-11-10 19:01:16,656 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-10 19:01:16,681 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6620] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-11-10 19:01:16,709 [salt.state       :300 ][INFO    ][6620] The service ntp is already running
2018-11-10 19:01:16,711 [salt.state       :1951][INFO    ][6620] Completed state [ntp] at time 19:01:16.711578 duration_in_ms=85.436
2018-11-10 19:01:16,724 [salt.minion      :1711][INFO    ][6620] Returning information for job: 20181110190051727558
2018-11-10 19:01:46,573 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181110190146556437
2018-11-10 19:01:46,602 [salt.minion      :1432][INFO    ][7408] Starting a new job with PID 7408
2018-11-10 19:01:46,627 [salt.minion      :1711][INFO    ][7408] Returning information for job: 20181110190146556437
2018-11-10 19:02:03,535 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command pkg.upgrade with jid 20181110190203522119
2018-11-10 19:02:03,565 [salt.minion      :1432][INFO    ][7413] Starting a new job with PID 7413
2018-11-10 19:02:03,597 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7413] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:02:04,207 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7413] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-11-10 19:02:08,643 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190208623782
2018-11-10 19:02:08,669 [salt.minion      :1432][INFO    ][7544] Starting a new job with PID 7544
2018-11-10 19:02:08,704 [salt.minion      :1711][INFO    ][7544] Returning information for job: 20181110190208623782
2018-11-10 19:02:18,728 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190218708547
2018-11-10 19:02:18,761 [salt.minion      :1432][INFO    ][7824] Starting a new job with PID 7824
2018-11-10 19:02:18,791 [salt.minion      :1711][INFO    ][7824] Returning information for job: 20181110190218708547
2018-11-10 19:02:28,865 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190228844075
2018-11-10 19:02:28,899 [salt.minion      :1432][INFO    ][8516] Starting a new job with PID 8516
2018-11-10 19:02:28,933 [salt.minion      :1711][INFO    ][8516] Returning information for job: 20181110190228844075
2018-11-10 19:02:33,003 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][7413] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:02:33,070 [salt.minion      :1711][INFO    ][7413] Returning information for job: 20181110190203522119
2018-11-10 19:02:58,649 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command test.ping with jid 20181110190258635715
2018-11-10 19:02:58,681 [salt.minion      :1432][INFO    ][8643] Starting a new job with PID 8643
2018-11-10 19:02:58,712 [salt.minion      :1711][INFO    ][8643] Returning information for job: 20181110190258635715
2018-11-10 19:05:13,454 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110190513435358
2018-11-10 19:05:13,474 [salt.minion      :1432][INFO    ][8658] Starting a new job with PID 8658
2018-11-10 19:05:18,575 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190518558139
2018-11-10 19:05:18,600 [salt.minion      :1432][INFO    ][8665] Starting a new job with PID 8665
2018-11-10 19:05:18,619 [salt.minion      :1711][INFO    ][8665] Returning information for job: 20181110190518558139
2018-11-10 19:05:18,944 [salt.state       :915 ][INFO    ][8658] Loading fresh modules for state activity
2018-11-10 19:05:19,014 [salt.fileclient  :1219][INFO    ][8658] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-11-10 19:05:19,056 [salt.fileclient  :1219][INFO    ][8658] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-11-10 19:05:19,896 [salt.state       :1780][INFO    ][8658] Running state [keepalived] at time 19:05:19.896864
2018-11-10 19:05:19,897 [salt.state       :1813][INFO    ][8658] Executing state pkg.installed for [keepalived]
2018-11-10 19:05:19,898 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:05:20,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-11-10 19:05:20,528 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:05:22,607 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:05:22,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-11-10 19:05:27,510 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:05:27,559 [salt.state       :300 ][INFO    ][8658] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-11-10 19:05:27,583 [salt.state       :915 ][INFO    ][8658] Loading fresh modules for state activity
2018-11-10 19:05:27,633 [salt.state       :1951][INFO    ][8658] Completed state [keepalived] at time 19:05:27.633111 duration_in_ms=7736.247
2018-11-10 19:05:27,639 [salt.state       :1780][INFO    ][8658] Running state [lsof] at time 19:05:27.639949
2018-11-10 19:05:27,640 [salt.state       :1813][INFO    ][8658] Executing state pkg.installed for [lsof]
2018-11-10 19:05:28,461 [salt.state       :300 ][INFO    ][8658] All specified packages are already installed
2018-11-10 19:05:28,463 [salt.state       :1951][INFO    ][8658] Completed state [lsof] at time 19:05:28.463636 duration_in_ms=823.684
2018-11-10 19:05:28,471 [salt.state       :1780][INFO    ][8658] Running state [/etc/keepalived/keepalived.conf] at time 19:05:28.471341
2018-11-10 19:05:28,471 [salt.state       :1813][INFO    ][8658] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-11-10 19:05:28,508 [salt.fileclient  :1219][INFO    ][8658] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-11-10 19:05:28,566 [salt.state       :300 ][INFO    ][8658] File changed:
New file
2018-11-10 19:05:28,566 [salt.state       :1951][INFO    ][8658] Completed state [/etc/keepalived/keepalived.conf] at time 19:05:28.566808 duration_in_ms=95.467
2018-11-10 19:05:28,568 [salt.state       :1780][INFO    ][8658] Running state [keepalived] at time 19:05:28.568349
2018-11-10 19:05:28,568 [salt.state       :1813][INFO    ][8658] Executing state service.running for [keepalived]
2018-11-10 19:05:28,569 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-11-10 19:05:28,591 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-11-10 19:05:28,614 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-10 19:05:28,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-11-10 19:05:28,698 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110190528682823
2018-11-10 19:05:28,702 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-11-10 19:05:28,724 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-10 19:05:28,726 [salt.minion      :1432][INFO    ][10012] Starting a new job with PID 10012
2018-11-10 19:05:28,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][8658] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-10 19:05:28,763 [salt.state       :300 ][INFO    ][8658] {'keepalived': True}
2018-11-10 19:05:28,764 [salt.state       :1951][INFO    ][8658] Completed state [keepalived] at time 19:05:28.764460 duration_in_ms=196.11
2018-11-10 19:05:28,766 [salt.minion      :1711][INFO    ][8658] Returning information for job: 20181110190513435358
2018-11-10 19:05:28,795 [salt.minion      :1711][INFO    ][10012] Returning information for job: 20181110190528682823
2018-11-10 19:06:49,181 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command pillar.get with jid 20181110190649163835
2018-11-10 19:06:49,210 [salt.minion      :1432][INFO    ][10029] Starting a new job with PID 10029
2018-11-10 19:06:49,225 [salt.minion      :1711][INFO    ][10029] Returning information for job: 20181110190649163835
2018-11-10 19:19:19,964 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110191919942925
2018-11-10 19:19:19,988 [salt.minion      :1432][INFO    ][10096] Starting a new job with PID 10096
2018-11-10 19:19:25,066 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110191925035978
2018-11-10 19:19:25,089 [salt.minion      :1432][INFO    ][10101] Starting a new job with PID 10101
2018-11-10 19:19:25,110 [salt.minion      :1711][INFO    ][10101] Returning information for job: 20181110191925035978
2018-11-10 19:19:26,388 [salt.state       :915 ][INFO    ][10096] Loading fresh modules for state activity
2018-11-10 19:19:26,948 [salt.fileclient  :1219][INFO    ][10096] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-11-10 19:19:26,981 [salt.fileclient  :1219][INFO    ][10096] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-11-10 19:19:27,011 [salt.fileclient  :1219][INFO    ][10096] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-11-10 19:19:27,804 [salt.state       :1780][INFO    ][10096] Running state [memcached] at time 19:19:27.804894
2018-11-10 19:19:27,805 [salt.state       :1813][INFO    ][10096] Executing state pkg.installed for [memcached]
2018-11-10 19:19:27,806 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:19:28,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-11-10 19:19:28,455 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:19:30,630 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:19:30,657 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-11-10 19:19:34,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:19:34,653 [salt.state       :300 ][INFO    ][10096] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-11-10 19:19:34,678 [salt.state       :915 ][INFO    ][10096] Loading fresh modules for state activity
2018-11-10 19:19:34,767 [salt.state       :1951][INFO    ][10096] Completed state [memcached] at time 19:19:34.767279 duration_in_ms=6962.386
2018-11-10 19:19:34,774 [salt.state       :1780][INFO    ][10096] Running state [python-memcache] at time 19:19:34.774753
2018-11-10 19:19:34,775 [salt.state       :1813][INFO    ][10096] Executing state pkg.installed for [python-memcache]
2018-11-10 19:19:35,429 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110191935149839
2018-11-10 19:19:35,455 [salt.minion      :1432][INFO    ][10929] Starting a new job with PID 10929
2018-11-10 19:19:35,480 [salt.minion      :1711][INFO    ][10929] Returning information for job: 20181110191935149839
2018-11-10 19:19:35,595 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:19:35,621 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-11-10 19:19:37,808 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:19:37,859 [salt.state       :300 ][INFO    ][10096] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-11-10 19:19:37,882 [salt.state       :915 ][INFO    ][10096] Loading fresh modules for state activity
2018-11-10 19:19:37,927 [salt.state       :1951][INFO    ][10096] Completed state [python-memcache] at time 19:19:37.927403 duration_in_ms=3152.65
2018-11-10 19:19:37,934 [salt.state       :1780][INFO    ][10096] Running state [/etc/memcached.conf] at time 19:19:37.934281
2018-11-10 19:19:37,934 [salt.state       :1813][INFO    ][10096] Executing state file.managed for [/etc/memcached.conf]
2018-11-10 19:19:37,974 [salt.fileclient  :1219][INFO    ][10096] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-11-10 19:19:38,016 [salt.state       :300 ][INFO    ][10096] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-11-10 19:19:38,023 [salt.state       :1951][INFO    ][10096] Completed state [/etc/memcached.conf] at time 19:19:38.023285 duration_in_ms=89.003
2018-11-10 19:19:38,582 [salt.state       :1780][INFO    ][10096] Running state [memcached] at time 19:19:38.582182
2018-11-10 19:19:38,583 [salt.state       :1813][INFO    ][10096] Executing state service.running for [memcached]
2018-11-10 19:19:38,584 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-11-10 19:19:38,612 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-11-10 19:19:38,632 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-11-10 19:19:38,652 [salt.state       :300 ][INFO    ][10096] The service memcached is already running
2018-11-10 19:19:38,653 [salt.state       :1951][INFO    ][10096] Completed state [memcached] at time 19:19:38.652915 duration_in_ms=70.734
2018-11-10 19:19:38,653 [salt.state       :1780][INFO    ][10096] Running state [memcached] at time 19:19:38.653232
2018-11-10 19:19:38,653 [salt.state       :1813][INFO    ][10096] Executing state service.mod_watch for [memcached]
2018-11-10 19:19:38,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-11-10 19:19:38,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10096] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-11-10 19:19:38,705 [salt.state       :300 ][INFO    ][10096] {'memcached': True}
2018-11-10 19:19:38,706 [salt.state       :1951][INFO    ][10096] Completed state [memcached] at time 19:19:38.706307 duration_in_ms=53.074
2018-11-10 19:19:38,708 [salt.minion      :1711][INFO    ][10096] Returning information for job: 20181110191919942925
2018-11-10 19:19:40,317 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110191940295244
2018-11-10 19:19:40,340 [salt.minion      :1432][INFO    ][11100] Starting a new job with PID 11100
2018-11-10 19:19:41,240 [salt.state       :915 ][INFO    ][11100] Loading fresh modules for state activity
2018-11-10 19:19:42,670 [salt.fileclient  :1219][INFO    ][11100] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-11-10 19:19:42,704 [salt.fileclient  :1219][INFO    ][11100] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-11-10 19:19:43,631 [salt.state       :1780][INFO    ][11100] Running state [haproxy] at time 19:19:43.631814
2018-11-10 19:19:43,632 [salt.state       :1813][INFO    ][11100] Executing state pkg.installed for [haproxy]
2018-11-10 19:19:43,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:19:44,250 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-11-10 19:19:44,448 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:19:45,339 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110191945313494
2018-11-10 19:19:45,373 [salt.minion      :1432][INFO    ][11431] Starting a new job with PID 11431
2018-11-10 19:19:45,401 [salt.minion      :1711][INFO    ][11431] Returning information for job: 20181110191945313494
2018-11-10 19:19:46,793 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:19:46,833 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-11-10 19:19:51,253 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:19:51,297 [salt.state       :300 ][INFO    ][11100] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-11-10 19:19:51,321 [salt.state       :915 ][INFO    ][11100] Loading fresh modules for state activity
2018-11-10 19:19:51,374 [salt.state       :1951][INFO    ][11100] Completed state [haproxy] at time 19:19:51.373942 duration_in_ms=7742.128
2018-11-10 19:19:51,380 [salt.state       :1780][INFO    ][11100] Running state [/etc/default/haproxy] at time 19:19:51.380844
2018-11-10 19:19:51,381 [salt.state       :1813][INFO    ][11100] Executing state file.managed for [/etc/default/haproxy]
2018-11-10 19:19:51,423 [salt.fileclient  :1219][INFO    ][11100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-11-10 19:19:51,426 [salt.state       :300 ][INFO    ][11100] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-11-10 19:19:51,432 [salt.state       :1951][INFO    ][11100] Completed state [/etc/default/haproxy] at time 19:19:51.431956 duration_in_ms=51.112
2018-11-10 19:19:51,432 [salt.state       :1780][INFO    ][11100] Running state [/etc/haproxy/haproxy.cfg] at time 19:19:51.432586
2018-11-10 19:19:51,433 [salt.state       :1813][INFO    ][11100] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-11-10 19:19:51,457 [salt.fileclient  :1219][INFO    ][11100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-11-10 19:19:51,687 [salt.state       :300 ][INFO    ][11100] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  25000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-11-10 19:19:51,696 [salt.state       :1951][INFO    ][11100] Completed state [/etc/haproxy/haproxy.cfg] at time 19:19:51.695440 duration_in_ms=262.853
2018-11-10 19:19:51,696 [salt.state       :1780][INFO    ][11100] Running state [/etc/haproxy/ssl] at time 19:19:51.696736
2018-11-10 19:19:51,697 [salt.state       :1813][INFO    ][11100] Executing state file.directory for [/etc/haproxy/ssl]
2018-11-10 19:19:51,699 [salt.state       :300 ][INFO    ][11100] {'/etc/haproxy/ssl': 'New Dir'}
2018-11-10 19:19:51,699 [salt.state       :1951][INFO    ][11100] Completed state [/etc/haproxy/ssl] at time 19:19:51.699828 duration_in_ms=3.092
2018-11-10 19:19:51,700 [salt.state       :1780][INFO    ][11100] Running state [/etc/haproxy/errors/429.http11] at time 19:19:51.700164
2018-11-10 19:19:51,700 [salt.state       :1813][INFO    ][11100] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-11-10 19:19:51,742 [salt.fileclient  :1219][INFO    ][11100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-11-10 19:19:51,755 [salt.state       :300 ][INFO    ][11100] File changed:
New file
2018-11-10 19:19:51,757 [salt.state       :1951][INFO    ][11100] Completed state [/etc/haproxy/errors/429.http11] at time 19:19:51.757521 duration_in_ms=57.357
2018-11-10 19:19:51,759 [salt.state       :1780][INFO    ][11100] Running state [haproxy_status_packages] at time 19:19:51.759137
2018-11-10 19:19:51,760 [salt.state       :1813][INFO    ][11100] Executing state pkg.installed for [haproxy_status_packages]
2018-11-10 19:19:52,640 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:19:52,665 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-11-10 19:19:54,979 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:19:55,029 [salt.state       :300 ][INFO    ][11100] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-11-10 19:19:55,050 [salt.state       :915 ][INFO    ][11100] Loading fresh modules for state activity
2018-11-10 19:19:55,097 [salt.state       :1951][INFO    ][11100] Completed state [haproxy_status_packages] at time 19:19:55.097368 duration_in_ms=3338.231
2018-11-10 19:19:55,101 [salt.state       :1780][INFO    ][11100] Running state [/usr/bin/haproxy-status.sh] at time 19:19:55.101619
2018-11-10 19:19:55,101 [salt.state       :1813][INFO    ][11100] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-11-10 19:19:55,128 [salt.fileclient  :1219][INFO    ][11100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-11-10 19:19:55,165 [salt.state       :300 ][INFO    ][11100] File changed:
New file
2018-11-10 19:19:55,165 [salt.state       :1951][INFO    ][11100] Completed state [/usr/bin/haproxy-status.sh] at time 19:19:55.165798 duration_in_ms=64.178
2018-11-10 19:19:55,169 [salt.state       :1780][INFO    ][11100] Running state [net.ipv4.ip_nonlocal_bind] at time 19:19:55.169191
2018-11-10 19:19:55,169 [salt.state       :1813][INFO    ][11100] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-11-10 19:19:55,173 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-11-10 19:19:55,188 [salt.state       :300 ][INFO    ][11100] {'net.ipv4.ip_nonlocal_bind': 1}
2018-11-10 19:19:55,188 [salt.state       :1951][INFO    ][11100] Completed state [net.ipv4.ip_nonlocal_bind] at time 19:19:55.188686 duration_in_ms=19.495
2018-11-10 19:19:55,753 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110191955358645
2018-11-10 19:19:55,772 [salt.minion      :1432][INFO    ][12250] Starting a new job with PID 12250
2018-11-10 19:19:55,775 [salt.state       :1780][INFO    ][11100] Running state [haproxy] at time 19:19:55.775468
2018-11-10 19:19:55,775 [salt.state       :1813][INFO    ][11100] Executing state service.running for [haproxy]
2018-11-10 19:19:55,776 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-11-10 19:19:55,794 [salt.minion      :1711][INFO    ][12250] Returning information for job: 20181110191955358645
2018-11-10 19:19:55,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-10 19:19:55,819 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-11-10 19:19:55,841 [salt.state       :300 ][INFO    ][11100] The service haproxy is already running
2018-11-10 19:19:55,843 [salt.state       :1951][INFO    ][11100] Completed state [haproxy] at time 19:19:55.842992 duration_in_ms=67.523
2018-11-10 19:19:55,845 [salt.state       :1780][INFO    ][11100] Running state [haproxy] at time 19:19:55.845080
2018-11-10 19:19:55,846 [salt.state       :1813][INFO    ][11100] Executing state service.mod_watch for [haproxy]
2018-11-10 19:19:55,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-10 19:19:55,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11100] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-11-10 19:19:55,912 [salt.state       :300 ][INFO    ][11100] {'haproxy': True}
2018-11-10 19:19:55,913 [salt.state       :1951][INFO    ][11100] Completed state [haproxy] at time 19:19:55.913171 duration_in_ms=68.091
2018-11-10 19:19:55,915 [salt.minion      :1711][INFO    ][11100] Returning information for job: 20181110191940295244
2018-11-10 19:19:57,169 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command service.status with jid 20181110191957146020
2018-11-10 19:19:57,192 [salt.minion      :1432][INFO    ][12300] Starting a new job with PID 12300
2018-11-10 19:19:57,827 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][12300] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-11-10 19:19:57,853 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][12300] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-10 19:19:57,879 [salt.minion      :1711][INFO    ][12300] Returning information for job: 20181110191957146020
2018-11-10 19:19:58,848 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command service.restart with jid 20181110191958822650
2018-11-10 19:19:58,872 [salt.minion      :1432][INFO    ][12310] Starting a new job with PID 12310
2018-11-10 19:19:59,487 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][12310] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-11-10 19:19:59,528 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][12310] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-11-10 19:19:59,576 [salt.minion      :1711][INFO    ][12310] Returning information for job: 20181110191958822650
2018-11-10 19:50:02,819 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110195002793407
2018-11-10 19:50:02,846 [salt.minion      :1432][INFO    ][12413] Starting a new job with PID 12413
2018-11-10 19:50:07,911 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195007884699
2018-11-10 19:50:07,933 [salt.minion      :1432][INFO    ][12418] Starting a new job with PID 12418
2018-11-10 19:50:07,955 [salt.minion      :1711][INFO    ][12418] Returning information for job: 20181110195007884699
2018-11-10 19:50:08,701 [salt.state       :915 ][INFO    ][12413] Loading fresh modules for state activity
2018-11-10 19:50:08,947 [salt.fileclient  :1219][INFO    ][12413] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-11-10 19:50:08,989 [salt.fileclient  :1219][INFO    ][12413] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-11-10 19:50:09,023 [salt.fileclient  :1219][INFO    ][12413] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-11-10 19:50:09,076 [salt.fileclient  :1219][INFO    ][12413] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-11-10 19:50:10,037 [salt.state       :1780][INFO    ][12413] Running state [redis-server] at time 19:50:10.037540
2018-11-10 19:50:10,038 [salt.state       :1813][INFO    ][12413] Executing state pkg.installed for [redis-server]
2018-11-10 19:50:10,038 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:50:10,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-11-10 19:50:10,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:50:15,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:50:15,717 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-11-10 19:50:17,947 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195017912803
2018-11-10 19:50:17,973 [salt.minion      :1432][INFO    ][13131] Starting a new job with PID 13131
2018-11-10 19:50:17,995 [salt.minion      :1711][INFO    ][13131] Returning information for job: 20181110195017912803
2018-11-10 19:50:20,629 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:50:20,681 [salt.state       :300 ][INFO    ][12413] Made the following changes:
'redis-tools' changed from 'absent' to '5:5.0.0-2.1~u16.04+mcp'
'lua5.2-bitop' changed from 'absent' to '1'
'lua-cjson' changed from 'absent' to '2.1.0+dfsg-2'
'libhiredis0.14' changed from 'absent' to '0.14.0-2.1~u16.04+mcp'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'
'lua5.1-bitop' changed from 'absent' to '1'
'lua-bitop' changed from 'absent' to '1.0.2-3'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'lua5.2-cjson' changed from 'absent' to '1'
'liblua5.1-bitop0' changed from 'absent' to '1'
'redis-server' changed from 'absent' to '5:5.0.0-2.1~u16.04+mcp'
'lua5.1-cjson' changed from 'absent' to '1'

2018-11-10 19:50:20,714 [salt.state       :915 ][INFO    ][12413] Loading fresh modules for state activity
2018-11-10 19:50:20,763 [salt.state       :1951][INFO    ][12413] Completed state [redis-server] at time 19:50:20.763507 duration_in_ms=10725.967
2018-11-10 19:50:20,768 [salt.state       :1780][INFO    ][12413] Running state [vm.overcommit_memory] at time 19:50:20.768852
2018-11-10 19:50:20,769 [salt.state       :1813][INFO    ][12413] Executing state sysctl.present for [vm.overcommit_memory]
2018-11-10 19:50:20,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-11-10 19:50:20,788 [salt.state       :300 ][INFO    ][12413] {'vm.overcommit_memory': 1}
2018-11-10 19:50:20,789 [salt.state       :1951][INFO    ][12413] Completed state [vm.overcommit_memory] at time 19:50:20.789123 duration_in_ms=20.271
2018-11-10 19:50:20,793 [salt.state       :1780][INFO    ][12413] Running state [/etc/redis/redis.conf] at time 19:50:20.793524
2018-11-10 19:50:20,793 [salt.state       :1813][INFO    ][12413] Executing state file.managed for [/etc/redis/redis.conf]
2018-11-10 19:50:20,839 [salt.fileclient  :1219][INFO    ][12413] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/redis.conf'
2018-11-10 19:50:20,933 [salt.state       :300 ][INFO    ][12413] File changed:
--- 
+++ 
@@ -1,4 +1,3 @@
-# Redis configuration file example.
 #
 # Note that in order to read the configuration file, Redis must be
 # started with the file path as first argument:
@@ -66,7 +65,7 @@
 # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
 # JUST COMMENT THE FOLLOWING LINE.
 # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-bind 127.0.0.1 ::1
+bind 192.168.10.34
 
 # Protected mode is a layer of security protection, in order to avoid that
 # Redis instances left open on the internet are accessed and exploited.
@@ -144,7 +143,7 @@
 #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
 # Note: these supervision methods only signal "process is ready."
 #       They do not enable continuous liveness pings back to your supervisor.
-supervised no
+supervised auto
 
 # If a pid file is specified, Redis writes it where specified at startup
 # and removes it at exit.
@@ -284,6 +283,7 @@
 #    and resynchronize with them.
 #
 # replicaof <masterip> <masterport>
+replicaof 192.168.10.32 6379
 
 # If the master is password protected (using the "requirepass" configuration
 # directive below) it is possible to tell the replica to authenticate before
@@ -695,7 +695,6 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
 appendonly no
 
 # The name of the append only file (default: "appendonly.aof")
@@ -725,9 +724,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is
@@ -1375,4 +1372,3 @@
 # Maximum number of set/hash/zset/list fields that will be processed from
 # the main dictionary scan
 # active-defrag-max-scan-fields 1000
-

2018-11-10 19:50:20,933 [salt.state       :1951][INFO    ][12413] Completed state [/etc/redis/redis.conf] at time 19:50:20.933597 duration_in_ms=140.072
2018-11-10 19:50:21,550 [salt.state       :1780][INFO    ][12413] Running state [redis-server] at time 19:50:21.550772
2018-11-10 19:50:21,551 [salt.state       :1813][INFO    ][12413] Executing state service.running for [redis-server]
2018-11-10 19:50:21,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-11-10 19:50:21,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-11-10 19:50:21,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-11-10 19:50:21,626 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-server.service'] in directory '/root'
2018-11-10 19:50:21,728 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-11-10 19:50:21,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-11-10 19:50:21,782 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-11-10 19:50:21,804 [salt.state       :300 ][INFO    ][12413] {'redis-server': True}
2018-11-10 19:50:21,805 [salt.state       :1951][INFO    ][12413] Completed state [redis-server] at time 19:50:21.805358 duration_in_ms=254.586
2018-11-10 19:50:21,809 [salt.state       :1780][INFO    ][12413] Running state [redis-sentinel] at time 19:50:21.809610
2018-11-10 19:50:21,809 [salt.state       :1813][INFO    ][12413] Executing state pkg.installed for [redis-sentinel]
2018-11-10 19:50:22,120 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:50:22,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-11-10 19:50:26,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:50:26,147 [salt.state       :300 ][INFO    ][12413] Made the following changes:
'redis-sentinel' changed from 'absent' to '5:5.0.0-2.1~u16.04+mcp'

2018-11-10 19:50:26,169 [salt.state       :915 ][INFO    ][12413] Loading fresh modules for state activity
2018-11-10 19:50:26,220 [salt.state       :1951][INFO    ][12413] Completed state [redis-sentinel] at time 19:50:26.220897 duration_in_ms=4411.287
2018-11-10 19:50:26,886 [salt.state       :1780][INFO    ][12413] Running state [/etc/redis/sentinel.conf] at time 19:50:26.886706
2018-11-10 19:50:26,887 [salt.state       :1813][INFO    ][12413] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-11-10 19:50:26,911 [salt.fileclient  :1219][INFO    ][12413] Fetching file from saltenv 'base', ** done ** 'redis/files/5.0/sentinel.conf'
2018-11-10 19:50:26,963 [salt.state       :300 ][INFO    ][12413] File changed:
--- 
+++ 
@@ -1,7 +1,3 @@
-# Example sentinel.conf
-
-# *** IMPORTANT ***
-#
 # By default Sentinel will not be reachable from interfaces different than
 # localhost, either use the 'bind' directive to bind to a list of network
 # interfaces, or disable protected mode with "protected-mode no" by
@@ -13,7 +9,7 @@
 # For example you may use one of the following:
 #
 # bind 127.0.0.1 192.168.1.1
-bind 127.0.0.1 ::1
+bind 192.168.10.34
 #
 # protected-mode no
 
@@ -82,7 +78,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -111,7 +107,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numreplicas>
 #
@@ -119,7 +115,7 @@
 # during the failover. Use a low number if you use the replicas to serve query
 # to avoid that all the replicas will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -144,7 +140,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #
@@ -168,7 +164,7 @@
 # NOTIFICATION SCRIPT
 #
 # sentinel notification-script <master-name> <script-path>
-# 
+#
 # Call the specified notification script for any sentinel event that is
 # generated in the WARNING level (for instance -sdown, -odown, and so forth).
 # This script should notify the system administrator via email, SMS, or any
@@ -192,14 +188,14 @@
 # When the master changed because of a failover a script can be called in
 # order to perform application-specific tasks to notify the clients that the
 # configuration has changed and the master is at a different address.
-# 
+#
 # The following arguments are passed to the script:
 #
 # <master-name> <role> <state> <from-ip> <from-port> <to-ip> <to-port>
 #
 # <state> is currently always "failover"
 # <role> is either "leader" or "observer"
-# 
+#
 # The arguments from-ip, from-port, to-ip, to-port are used to communicate
 # the old address of the master and the new address of the elected replica
 # (now a master).

2018-11-10 19:50:26,963 [salt.state       :1951][INFO    ][12413] Completed state [/etc/redis/sentinel.conf] at time 19:50:26.963552 duration_in_ms=76.847
2018-11-10 19:50:26,964 [salt.state       :1780][INFO    ][12413] Running state [redis-sentinel] at time 19:50:26.964319
2018-11-10 19:50:26,964 [salt.state       :1813][INFO    ][12413] Executing state service.running for [redis-sentinel]
2018-11-10 19:50:26,965 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-11-10 19:50:26,991 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-11-10 19:50:27,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-11-10 19:50:27,040 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'redis-sentinel.service'] in directory '/root'
2018-11-10 19:50:27,154 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-11-10 19:50:27,178 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-11-10 19:50:27,206 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12413] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-11-10 19:50:27,228 [salt.state       :300 ][INFO    ][12413] {'redis-sentinel': True}
2018-11-10 19:50:27,229 [salt.state       :1951][INFO    ][12413] Completed state [redis-sentinel] at time 19:50:27.229029 duration_in_ms=264.71
2018-11-10 19:50:27,233 [salt.minion      :1711][INFO    ][12413] Returning information for job: 20181110195002793407
2018-11-10 19:50:27,830 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command test.ping with jid 20181110195027801379
2018-11-10 19:50:27,855 [salt.minion      :1432][INFO    ][13919] Starting a new job with PID 13919
2018-11-10 19:50:27,885 [salt.minion      :1711][INFO    ][13919] Returning information for job: 20181110195027801379
2018-11-10 19:52:04,022 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110195203996105
2018-11-10 19:52:04,045 [salt.minion      :1432][INFO    ][13924] Starting a new job with PID 13924
2018-11-10 19:52:09,142 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195209114327
2018-11-10 19:52:09,166 [salt.minion      :1432][INFO    ][13931] Starting a new job with PID 13931
2018-11-10 19:52:09,189 [salt.minion      :1711][INFO    ][13931] Returning information for job: 20181110195209114327
2018-11-10 19:52:09,590 [salt.state       :915 ][INFO    ][13924] Loading fresh modules for state activity
2018-11-10 19:52:09,667 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-11-10 19:52:09,714 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-11-10 19:52:09,817 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-11-10 19:52:09,857 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-11-10 19:52:09,902 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-11-10 19:52:10,014 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-11-10 19:52:10,115 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-11-10 19:52:10,274 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-11-10 19:52:10,441 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-11-10 19:52:10,537 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-11-10 19:52:10,635 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-11-10 19:52:10,734 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-11-10 19:52:11,788 [salt.state       :1780][INFO    ][13924] Running state [apache2] at time 19:52:11.788214
2018-11-10 19:52:11,789 [salt.state       :1813][INFO    ][13924] Executing state pkg.installed for [apache2]
2018-11-10 19:52:11,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:52:12,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-11-10 19:52:12,613 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:52:15,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:52:15,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-11-10 19:52:19,206 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195219179520
2018-11-10 19:52:19,232 [salt.minion      :1432][INFO    ][14998] Starting a new job with PID 14998
2018-11-10 19:52:19,256 [salt.minion      :1711][INFO    ][14998] Returning information for job: 20181110195219179520
2018-11-10 19:52:24,805 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:52:24,868 [salt.state       :300 ][INFO    ][13924] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-11-10 19:52:24,898 [salt.state       :915 ][INFO    ][13924] Loading fresh modules for state activity
2018-11-10 19:52:24,998 [salt.state       :1951][INFO    ][13924] Completed state [apache2] at time 19:52:24.998152 duration_in_ms=13209.938
2018-11-10 19:52:25,005 [salt.state       :1780][INFO    ][13924] Running state [openssl] at time 19:52:25.005910
2018-11-10 19:52:25,006 [salt.state       :1813][INFO    ][13924] Executing state pkg.installed for [openssl]
2018-11-10 19:52:25,955 [salt.state       :300 ][INFO    ][13924] All specified packages are already installed
2018-11-10 19:52:25,955 [salt.state       :1951][INFO    ][13924] Completed state [openssl] at time 19:52:25.955510 duration_in_ms=949.599
2018-11-10 19:52:25,959 [salt.state       :1780][INFO    ][13924] Running state [a2enmod rewrite] at time 19:52:25.959592
2018-11-10 19:52:25,959 [salt.state       :1813][INFO    ][13924] Executing state cmd.run for [a2enmod rewrite]
2018-11-10 19:52:25,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command 'a2enmod rewrite' in directory '/root'
2018-11-10 19:52:26,043 [salt.state       :300 ][INFO    ][13924] {'pid': 15457, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-11-10 19:52:26,044 [salt.state       :1951][INFO    ][13924] Completed state [a2enmod rewrite] at time 19:52:26.044296 duration_in_ms=84.703
2018-11-10 19:52:26,045 [salt.state       :1780][INFO    ][13924] Running state [libapache2-mod-wsgi] at time 19:52:26.045832
2018-11-10 19:52:26,046 [salt.state       :1813][INFO    ][13924] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-10 19:52:26,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:52:26,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-11-10 19:52:29,379 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195229345519
2018-11-10 19:52:29,403 [salt.minion      :1432][INFO    ][15727] Starting a new job with PID 15727
2018-11-10 19:52:29,430 [salt.minion      :1711][INFO    ][15727] Returning information for job: 20181110195229345519
2018-11-10 19:52:31,503 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:52:31,565 [salt.state       :300 ][INFO    ][13924] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-11-10 19:52:31,590 [salt.state       :915 ][INFO    ][13924] Loading fresh modules for state activity
2018-11-10 19:52:31,641 [salt.state       :1951][INFO    ][13924] Completed state [libapache2-mod-wsgi] at time 19:52:31.641466 duration_in_ms=5595.633
2018-11-10 19:52:31,646 [salt.state       :1780][INFO    ][13924] Running state [a2enmod wsgi] at time 19:52:31.646240
2018-11-10 19:52:31,646 [salt.state       :1813][INFO    ][13924] Executing state cmd.run for [a2enmod wsgi]
2018-11-10 19:52:31,647 [salt.state       :300 ][INFO    ][13924] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-10 19:52:31,647 [salt.state       :1951][INFO    ][13924] Completed state [a2enmod wsgi] at time 19:52:31.647213 duration_in_ms=0.973
2018-11-10 19:52:31,653 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 19:52:31.653334
2018-11-10 19:52:31,653 [salt.state       :1813][INFO    ][13924] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-10 19:52:31,695 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-11-10 19:52:31,766 [salt.state       :300 ][INFO    ][13924] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-11-10 19:52:31,767 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 19:52:31.767136 duration_in_ms=113.802
2018-11-10 19:52:31,767 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 19:52:31.767396
2018-11-10 19:52:31,767 [salt.state       :1813][INFO    ][13924] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-10 19:52:31,768 [salt.state       :300 ][INFO    ][13924] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-10 19:52:31,768 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 19:52:31.768197 duration_in_ms=0.8
2018-11-10 19:52:31,768 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 19:52:31.768429
2018-11-10 19:52:31,769 [salt.state       :1813][INFO    ][13924] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-10 19:52:31,769 [salt.state       :300 ][INFO    ][13924] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-11-10 19:52:31,769 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 19:52:31.769827 duration_in_ms=1.398
2018-11-10 19:52:31,770 [salt.state       :1780][INFO    ][13924] Running state [a2enmod mpm_prefork] at time 19:52:31.770605
2018-11-10 19:52:31,770 [salt.state       :1813][INFO    ][13924] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-10 19:52:31,774 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-11-10 19:52:31,841 [salt.state       :300 ][INFO    ][13924] {'pid': 15793, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-11-10 19:52:31,842 [salt.state       :1951][INFO    ][13924] Completed state [a2enmod mpm_prefork] at time 19:52:31.842313 duration_in_ms=71.707
2018-11-10 19:52:31,842 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 19:52:31.842827
2018-11-10 19:52:31,843 [salt.state       :1813][INFO    ][13924] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-10 19:52:31,844 [salt.state       :300 ][INFO    ][13924] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-10 19:52:31,844 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 19:52:31.844310 duration_in_ms=1.483
2018-11-10 19:52:31,844 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 19:52:31.844577
2018-11-10 19:52:31,846 [salt.state       :1813][INFO    ][13924] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-10 19:52:31,847 [salt.state       :300 ][INFO    ][13924] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-11-10 19:52:31,847 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 19:52:31.847495 duration_in_ms=2.919
2018-11-10 19:52:31,849 [salt.state       :1780][INFO    ][13924] Running state [apache_server_service_task] at time 19:52:31.849542
2018-11-10 19:52:31,849 [salt.state       :1813][INFO    ][13924] Executing state test.show_notification for [apache_server_service_task]
2018-11-10 19:52:31,850 [salt.state       :300 ][INFO    ][13924] Running apache.server.service
2018-11-10 19:52:31,850 [salt.state       :1951][INFO    ][13924] Completed state [apache_server_service_task] at time 19:52:31.850312 duration_in_ms=0.77
2018-11-10 19:52:31,850 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/ports.conf] at time 19:52:31.850957
2018-11-10 19:52:31,851 [salt.state       :1813][INFO    ][13924] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-10 19:52:31,872 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-11-10 19:52:31,938 [salt.state       :300 ][INFO    ][13924] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-11-10 19:52:31,938 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/ports.conf] at time 19:52:31.938708 duration_in_ms=87.751
2018-11-10 19:52:31,939 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/conf-available/security.conf] at time 19:52:31.939189
2018-11-10 19:52:31,940 [salt.state       :1813][INFO    ][13924] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-10 19:52:31,959 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-11-10 19:52:32,027 [salt.state       :300 ][INFO    ][13924] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-11-10 19:52:32,027 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/conf-available/security.conf] at time 19:52:32.027317 duration_in_ms=88.128
2018-11-10 19:52:32,701 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 19:52:32.700947
2018-11-10 19:52:32,701 [salt.state       :1813][INFO    ][13924] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-10 19:52:32,702 [salt.state       :300 ][INFO    ][13924] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-11-10 19:52:32,702 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 19:52:32.702204 duration_in_ms=1.258
2018-11-10 19:52:32,703 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 19:52:32.703065
2018-11-10 19:52:32,703 [salt.state       :1813][INFO    ][13924] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-10 19:52:32,730 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-11-10 19:52:32,773 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-11-10 19:52:32,861 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-11-10 19:52:32,893 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-11-10 19:52:33,005 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-11-10 19:52:33,034 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-11-10 19:52:33,069 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-11-10 19:52:33,087 [salt.state       :300 ][INFO    ][13924] File changed:
New file
2018-11-10 19:52:33,087 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 19:52:33.087591 duration_in_ms=384.526
2018-11-10 19:52:33,088 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 19:52:33.088080
2018-11-10 19:52:33,088 [salt.state       :1813][INFO    ][13924] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-10 19:52:33,396 [salt.state       :300 ][INFO    ][13924] File changed:
New file
2018-11-10 19:52:33,397 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 19:52:33.397004 duration_in_ms=308.924
2018-11-10 19:52:33,399 [salt.state       :1780][INFO    ][13924] Running state [apache2] at time 19:52:33.399365
2018-11-10 19:52:33,400 [salt.state       :1813][INFO    ][13924] Executing state service.running for [apache2]
2018-11-10 19:52:33,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-10 19:52:33,430 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:52:33,454 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:52:33,479 [salt.state       :300 ][INFO    ][13924] The service apache2 is already running
2018-11-10 19:52:33,480 [salt.state       :1951][INFO    ][13924] Completed state [apache2] at time 19:52:33.480219 duration_in_ms=80.854
2018-11-10 19:52:33,480 [salt.state       :1780][INFO    ][13924] Running state [apache2] at time 19:52:33.480573
2018-11-10 19:52:33,481 [salt.state       :1813][INFO    ][13924] Executing state service.mod_watch for [apache2]
2018-11-10 19:52:33,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:52:33,504 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-11-10 19:52:33,710 [salt.state       :300 ][INFO    ][13924] {'apache2': True}
2018-11-10 19:52:33,711 [salt.state       :1951][INFO    ][13924] Completed state [apache2] at time 19:52:33.711227 duration_in_ms=230.653
2018-11-10 19:52:33,715 [salt.state       :1780][INFO    ][13924] Running state [/etc/apache2/conf-enabled/security.conf] at time 19:52:33.715531
2018-11-10 19:52:33,716 [salt.state       :1813][INFO    ][13924] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-10 19:52:33,727 [salt.state       :300 ][INFO    ][13924] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-11-10 19:52:33,727 [salt.state       :1951][INFO    ][13924] Completed state [/etc/apache2/conf-enabled/security.conf] at time 19:52:33.727776 duration_in_ms=12.246
2018-11-10 19:52:33,730 [salt.state       :1780][INFO    ][13924] Running state [gnocchi-common] at time 19:52:33.730905
2018-11-10 19:52:33,731 [salt.state       :1813][INFO    ][13924] Executing state pkg.installed for [gnocchi-common]
2018-11-10 19:52:34,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:52:34,087 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-11-10 19:52:39,550 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195239518082
2018-11-10 19:52:39,570 [salt.minion      :1432][INFO    ][16264] Starting a new job with PID 16264
2018-11-10 19:52:39,598 [salt.minion      :1711][INFO    ][16264] Returning information for job: 20181110195239518082
2018-11-10 19:52:49,709 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195249682433
2018-11-10 19:52:49,735 [salt.minion      :1432][INFO    ][17289] Starting a new job with PID 17289
2018-11-10 19:52:49,761 [salt.minion      :1711][INFO    ][17289] Returning information for job: 20181110195249682433
2018-11-10 19:52:59,869 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195259838672
2018-11-10 19:52:59,886 [salt.minion      :1432][INFO    ][18232] Starting a new job with PID 18232
2018-11-10 19:52:59,908 [salt.minion      :1711][INFO    ][18232] Returning information for job: 20181110195259838672
2018-11-10 19:53:10,017 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195309989989
2018-11-10 19:53:10,039 [salt.minion      :1432][INFO    ][18684] Starting a new job with PID 18684
2018-11-10 19:53:10,064 [salt.minion      :1711][INFO    ][18684] Returning information for job: 20181110195309989989
2018-11-10 19:53:17,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:53:17,584 [salt.state       :300 ][INFO    ][13924] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp6'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.2.0+dfsg1-2~u16.04+mcp'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-4~u16.04+mcp8'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-2~u16.04+mcp17'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-2~u16.04+mcp'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp12'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp5'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-4~u16.04+mcp8'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-11-10 19:53:17,616 [salt.state       :915 ][INFO    ][13924] Loading fresh modules for state activity
2018-11-10 19:53:17,664 [salt.state       :1951][INFO    ][13924] Completed state [gnocchi-common] at time 19:53:17.664132 duration_in_ms=43933.226
2018-11-10 19:53:17,667 [salt.state       :1780][INFO    ][13924] Running state [gnocchi_ssl_mysql] at time 19:53:17.667876
2018-11-10 19:53:17,668 [salt.state       :1813][INFO    ][13924] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-11-10 19:53:17,669 [salt.state       :300 ][INFO    ][13924] Running gnocchi._ssl.mysql
2018-11-10 19:53:17,669 [salt.state       :1951][INFO    ][13924] Completed state [gnocchi_ssl_mysql] at time 19:53:17.669497 duration_in_ms=1.621
2018-11-10 19:53:17,671 [salt.state       :1780][INFO    ][13924] Running state [/etc/gnocchi/gnocchi.conf] at time 19:53:17.671567
2018-11-10 19:53:17,671 [salt.state       :1813][INFO    ][13924] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-11-10 19:53:17,705 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-11-10 19:53:17,824 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-11-10 19:53:17,849 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-11-10 19:53:17,889 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-11-10 19:53:17,934 [salt.fileclient  :1219][INFO    ][13924] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-11-10 19:53:17,946 [salt.state       :300 ][INFO    ][13924] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `sentinel`,
-# `socket_keepalive`, `retry_on_timeout`, `ssl_certfile`, `db`,
-# `sentinel_fallback`, `encoding`, `ssl_keyfile`, `ssl`, `socket_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `sentinel`,
-# `socket_keepalive`, `retry_on_timeout`, `ssl_certfile`, `db`,
-# `sentinel_fallback`, `encoding`, `ssl_keyfile`, `ssl`, `socket_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.34:6379

2018-11-10 19:53:17,948 [salt.state       :1951][INFO    ][13924] Completed state [/etc/gnocchi/gnocchi.conf] at time 19:53:17.947927 duration_in_ms=276.359
2018-11-10 19:53:17,952 [salt.state       :1780][INFO    ][13924] Running state [gnocchi-api] at time 19:53:17.952596
2018-11-10 19:53:17,952 [salt.state       :1813][INFO    ][13924] Executing state pkg.installed for [gnocchi-api]
2018-11-10 19:53:19,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:53:19,795 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-11-10 19:53:20,187 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195320161280
2018-11-10 19:53:20,206 [salt.minion      :1432][INFO    ][19034] Starting a new job with PID 19034
2018-11-10 19:53:20,230 [salt.minion      :1711][INFO    ][19034] Returning information for job: 20181110195320161280
2018-11-10 19:53:30,091 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:53:30,157 [salt.state       :300 ][INFO    ][13924] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp22'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-4~u16.04+mcp8'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-11-10 19:53:30,196 [salt.state       :915 ][INFO    ][13924] Loading fresh modules for state activity
2018-11-10 19:53:30,245 [salt.state       :1951][INFO    ][13924] Completed state [gnocchi-api] at time 19:53:30.245577 duration_in_ms=12292.981
2018-11-10 19:53:30,254 [salt.state       :1780][INFO    ][13924] Running state [gnocchi-metricd] at time 19:53:30.253979
2018-11-10 19:53:30,254 [salt.state       :1813][INFO    ][13924] Executing state pkg.installed for [gnocchi-metricd]
2018-11-10 19:53:30,992 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195330329344
2018-11-10 19:53:31,011 [salt.minion      :1432][INFO    ][19920] Starting a new job with PID 19920
2018-11-10 19:53:31,033 [salt.minion      :1711][INFO    ][19920] Returning information for job: 20181110195330329344
2018-11-10 19:53:31,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:53:31,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-11-10 19:53:35,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:53:35,465 [salt.state       :300 ][INFO    ][13924] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-4~u16.04+mcp8'

2018-11-10 19:53:35,504 [salt.state       :915 ][INFO    ][13924] Loading fresh modules for state activity
2018-11-10 19:53:35,771 [salt.state       :1951][INFO    ][13924] Completed state [gnocchi-metricd] at time 19:53:35.771183 duration_in_ms=5517.203
2018-11-10 19:53:35,781 [salt.state       :1780][INFO    ][13924] Running state [python-memcache] at time 19:53:35.781356
2018-11-10 19:53:35,781 [salt.state       :1813][INFO    ][13924] Executing state pkg.installed for [python-memcache]
2018-11-10 19:53:36,881 [salt.state       :300 ][INFO    ][13924] All specified packages are already installed
2018-11-10 19:53:36,882 [salt.state       :1951][INFO    ][13924] Completed state [python-memcache] at time 19:53:36.882755 duration_in_ms=1101.398
2018-11-10 19:53:36,885 [salt.state       :1780][INFO    ][13924] Running state [gnocchi-upgrade] at time 19:53:36.885469
2018-11-10 19:53:36,886 [salt.state       :1813][INFO    ][13924] Executing state cmd.run for [gnocchi-upgrade]
2018-11-10 19:53:36,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-11-10 19:53:39,315 [salt.state       :300 ][INFO    ][13924] {'pid': 20185, 'retcode': 0, 'stderr': '2018-11-10 19:53:38,592 [20191] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-11-10 19:53:39,043 [20191] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://***:***@192.168.10.23/gnocchi?charset=utf8\n2018-11-10 19:53:39,233 [20191] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.34,port=6379,db=0>>>\n2018-11-10 19:53:39,235 [20191] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-11-10 19:53:39,318 [salt.state       :1951][INFO    ][13924] Completed state [gnocchi-upgrade] at time 19:53:39.317327 duration_in_ms=2431.857
2018-11-10 19:53:39,321 [salt.state       :1780][INFO    ][13924] Running state [wsgi_gnocchi] at time 19:53:39.321587
2018-11-10 19:53:39,322 [salt.state       :1813][INFO    ][13924] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-11-10 19:53:39,324 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-11-10 19:53:39,404 [salt.state       :300 ][INFO    ][13924] {'new': 'wsgi_gnocchi', 'old': None}
2018-11-10 19:53:39,406 [salt.state       :1951][INFO    ][13924] Completed state [wsgi_gnocchi] at time 19:53:39.406565 duration_in_ms=84.977
2018-11-10 19:53:39,409 [salt.state       :1780][INFO    ][13924] Running state [apache2] at time 19:53:39.409880
2018-11-10 19:53:39,410 [salt.state       :1813][INFO    ][13924] Executing state service.running for [apache2]
2018-11-10 19:53:39,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:53:39,440 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:53:39,478 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-11-10 19:53:40,505 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195340475957
2018-11-10 19:53:40,529 [salt.minion      :1432][INFO    ][20287] Starting a new job with PID 20287
2018-11-10 19:53:40,556 [salt.minion      :1711][INFO    ][20287] Returning information for job: 20181110195340475957
2018-11-10 19:53:40,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:53:40,733 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:53:40,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:53:40,791 [salt.state       :300 ][INFO    ][13924] {'apache2': True}
2018-11-10 19:53:40,792 [salt.state       :1951][INFO    ][13924] Completed state [apache2] at time 19:53:40.792832 duration_in_ms=1382.951
2018-11-10 19:53:40,794 [salt.state       :1780][INFO    ][13924] Running state [gnocchi-metricd] at time 19:53:40.794766
2018-11-10 19:53:40,795 [salt.state       :1813][INFO    ][13924] Executing state service.running for [gnocchi-metricd]
2018-11-10 19:53:40,797 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-11-10 19:53:40,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:40,847 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:40,874 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:40,930 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:40,969 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:41,036 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:41,124 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:42,029 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13924] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-10 19:53:42,058 [salt.state       :300 ][INFO    ][13924] {'gnocchi-metricd': True}
2018-11-10 19:53:42,061 [salt.state       :1951][INFO    ][13924] Completed state [gnocchi-metricd] at time 19:53:42.060941 duration_in_ms=1266.175
2018-11-10 19:53:42,069 [salt.minion      :1711][INFO    ][13924] Returning information for job: 20181110195203996105
2018-11-10 19:55:15,809 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command test.ping with jid 20181110195515782475
2018-11-10 19:55:15,832 [salt.minion      :1432][INFO    ][20511] Starting a new job with PID 20511
2018-11-10 19:55:15,861 [salt.minion      :1711][INFO    ][20511] Returning information for job: 20181110195515782475
2018-11-10 19:55:40,146 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110195540119566
2018-11-10 19:55:40,170 [salt.minion      :1432][INFO    ][20517] Starting a new job with PID 20517
2018-11-10 19:55:45,266 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195545240404
2018-11-10 19:55:45,296 [salt.minion      :1432][INFO    ][20524] Starting a new job with PID 20524
2018-11-10 19:55:45,333 [salt.minion      :1711][INFO    ][20524] Returning information for job: 20181110195545240404
2018-11-10 19:55:45,676 [salt.state       :915 ][INFO    ][20517] Loading fresh modules for state activity
2018-11-10 19:55:45,749 [salt.fileclient  :1219][INFO    ][20517] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-11-10 19:55:45,788 [salt.fileclient  :1219][INFO    ][20517] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-11-10 19:55:46,654 [salt.fileclient  :1219][INFO    ][20517] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-11-10 19:55:46,731 [salt.fileclient  :1219][INFO    ][20517] Fetching file from saltenv 'base', ** done ** 'panko/db/offline_sync.sls'
2018-11-10 19:55:48,877 [salt.state       :1780][INFO    ][20517] Running state [apache2] at time 19:55:48.876610
2018-11-10 19:55:48,877 [salt.state       :1813][INFO    ][20517] Executing state pkg.installed for [apache2]
2018-11-10 19:55:48,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:55:49,401 [salt.state       :300 ][INFO    ][20517] All specified packages are already installed
2018-11-10 19:55:49,403 [salt.state       :1951][INFO    ][20517] Completed state [apache2] at time 19:55:49.402743 duration_in_ms=526.133
2018-11-10 19:55:49,403 [salt.state       :1780][INFO    ][20517] Running state [openssl] at time 19:55:49.403790
2018-11-10 19:55:49,404 [salt.state       :1813][INFO    ][20517] Executing state pkg.installed for [openssl]
2018-11-10 19:55:49,416 [salt.state       :300 ][INFO    ][20517] All specified packages are already installed
2018-11-10 19:55:49,416 [salt.state       :1951][INFO    ][20517] Completed state [openssl] at time 19:55:49.416824 duration_in_ms=13.034
2018-11-10 19:55:49,417 [salt.state       :1780][INFO    ][20517] Running state [a2enmod rewrite] at time 19:55:49.417713
2018-11-10 19:55:49,418 [salt.state       :1813][INFO    ][20517] Executing state cmd.run for [a2enmod rewrite]
2018-11-10 19:55:49,418 [salt.state       :300 ][INFO    ][20517] /etc/apache2/mods-enabled/rewrite.load exists
2018-11-10 19:55:49,419 [salt.state       :1951][INFO    ][20517] Completed state [a2enmod rewrite] at time 19:55:49.419381 duration_in_ms=1.668
2018-11-10 19:55:49,420 [salt.state       :1780][INFO    ][20517] Running state [libapache2-mod-wsgi] at time 19:55:49.420468
2018-11-10 19:55:49,420 [salt.state       :1813][INFO    ][20517] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-10 19:55:49,431 [salt.state       :300 ][INFO    ][20517] All specified packages are already installed
2018-11-10 19:55:49,431 [salt.state       :1951][INFO    ][20517] Completed state [libapache2-mod-wsgi] at time 19:55:49.431743 duration_in_ms=11.275
2018-11-10 19:55:49,432 [salt.state       :1780][INFO    ][20517] Running state [a2enmod wsgi] at time 19:55:49.432796
2018-11-10 19:55:49,433 [salt.state       :1813][INFO    ][20517] Executing state cmd.run for [a2enmod wsgi]
2018-11-10 19:55:49,433 [salt.state       :300 ][INFO    ][20517] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-10 19:55:49,434 [salt.state       :1951][INFO    ][20517] Completed state [a2enmod wsgi] at time 19:55:49.434251 duration_in_ms=1.455
2018-11-10 19:55:49,446 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 19:55:49.446195
2018-11-10 19:55:49,446 [salt.state       :1813][INFO    ][20517] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-10 19:55:49,742 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-11-10 19:55:49,742 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 19:55:49.742521 duration_in_ms=296.325
2018-11-10 19:55:49,742 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 19:55:49.742773
2018-11-10 19:55:49,743 [salt.state       :1813][INFO    ][20517] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-10 19:55:49,743 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-10 19:55:49,744 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 19:55:49.744017 duration_in_ms=1.244
2018-11-10 19:55:49,744 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 19:55:49.744250
2018-11-10 19:55:49,744 [salt.state       :1813][INFO    ][20517] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-10 19:55:49,744 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-11-10 19:55:49,745 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 19:55:49.745380 duration_in_ms=1.13
2018-11-10 19:55:49,746 [salt.state       :1780][INFO    ][20517] Running state [a2enmod mpm_prefork] at time 19:55:49.746081
2018-11-10 19:55:49,746 [salt.state       :1813][INFO    ][20517] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-10 19:55:49,746 [salt.state       :300 ][INFO    ][20517] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-11-10 19:55:49,747 [salt.state       :1951][INFO    ][20517] Completed state [a2enmod mpm_prefork] at time 19:55:49.747219 duration_in_ms=1.139
2018-11-10 19:55:49,747 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 19:55:49.747477
2018-11-10 19:55:49,748 [salt.state       :1813][INFO    ][20517] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-10 19:55:49,748 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-10 19:55:49,748 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 19:55:49.748553 duration_in_ms=1.076
2018-11-10 19:55:49,749 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 19:55:49.748808
2018-11-10 19:55:49,749 [salt.state       :1813][INFO    ][20517] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-10 19:55:49,749 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-11-10 19:55:49,749 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 19:55:49.749872 duration_in_ms=1.064
2018-11-10 19:55:49,751 [salt.state       :1780][INFO    ][20517] Running state [apache_server_service_task] at time 19:55:49.751024
2018-11-10 19:55:49,751 [salt.state       :1813][INFO    ][20517] Executing state test.show_notification for [apache_server_service_task]
2018-11-10 19:55:49,751 [salt.state       :300 ][INFO    ][20517] Running apache.server.service
2018-11-10 19:55:49,751 [salt.state       :1951][INFO    ][20517] Completed state [apache_server_service_task] at time 19:55:49.751744 duration_in_ms=0.72
2018-11-10 19:55:49,752 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/ports.conf] at time 19:55:49.752165
2018-11-10 19:55:49,752 [salt.state       :1813][INFO    ][20517] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-10 19:55:49,835 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/ports.conf is in the correct state
2018-11-10 19:55:49,836 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/ports.conf] at time 19:55:49.836030 duration_in_ms=83.865
2018-11-10 19:55:49,836 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/conf-available/security.conf] at time 19:55:49.836462
2018-11-10 19:55:49,836 [salt.state       :1813][INFO    ][20517] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-10 19:55:49,917 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/conf-available/security.conf is in the correct state
2018-11-10 19:55:49,917 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/conf-available/security.conf] at time 19:55:49.917904 duration_in_ms=81.442
2018-11-10 19:55:49,926 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 19:55:49.926256
2018-11-10 19:55:49,926 [salt.state       :1813][INFO    ][20517] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-10 19:55:49,927 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-11-10 19:55:49,927 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 19:55:49.927444 duration_in_ms=1.188
2018-11-10 19:55:49,927 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 19:55:49.927889
2018-11-10 19:55:49,928 [salt.state       :1813][INFO    ][20517] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-10 19:55:50,208 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-11-10 19:55:50,209 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 19:55:50.209226 duration_in_ms=281.337
2018-11-10 19:55:50,210 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 19:55:50.209970
2018-11-10 19:55:50,210 [salt.state       :1813][INFO    ][20517] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-10 19:55:50,502 [salt.state       :300 ][INFO    ][20517] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-11-10 19:55:50,502 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 19:55:50.502543 duration_in_ms=292.572
2018-11-10 19:55:50,504 [salt.state       :1780][INFO    ][20517] Running state [apache2] at time 19:55:50.504756
2018-11-10 19:55:50,505 [salt.state       :1813][INFO    ][20517] Executing state service.running for [apache2]
2018-11-10 19:55:50,505 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-10 19:55:50,557 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:55:50,584 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:55:50,617 [salt.state       :300 ][INFO    ][20517] The service apache2 is already running
2018-11-10 19:55:50,618 [salt.state       :1951][INFO    ][20517] Completed state [apache2] at time 19:55:50.618551 duration_in_ms=113.794
2018-11-10 19:55:50,621 [salt.state       :1780][INFO    ][20517] Running state [/etc/apache2/conf-enabled/security.conf] at time 19:55:50.621133
2018-11-10 19:55:50,622 [salt.state       :1813][INFO    ][20517] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-10 19:55:50,627 [salt.state       :300 ][INFO    ][20517] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-11-10 19:55:50,628 [salt.state       :1951][INFO    ][20517] Completed state [/etc/apache2/conf-enabled/security.conf] at time 19:55:50.628017 duration_in_ms=6.882
2018-11-10 19:55:50,629 [salt.state       :1780][INFO    ][20517] Running state [panko-api] at time 19:55:50.629404
2018-11-10 19:55:50,630 [salt.state       :1813][INFO    ][20517] Executing state pkg.installed for [panko-api]
2018-11-10 19:55:50,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-11-10 19:55:50,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:55:53,228 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:55:53,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-11-10 19:55:55,348 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195555316023
2018-11-10 19:55:55,365 [salt.minion      :1432][INFO    ][21043] Starting a new job with PID 21043
2018-11-10 19:55:55,388 [salt.minion      :1711][INFO    ][21043] Returning information for job: 20181110195555316023
2018-11-10 19:55:57,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:55:57,295 [salt.state       :300 ][INFO    ][20517] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp7'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp7'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp7'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-11-10 19:55:57,342 [salt.state       :915 ][INFO    ][20517] Loading fresh modules for state activity
2018-11-10 19:55:57,392 [salt.state       :1951][INFO    ][20517] Completed state [panko-api] at time 19:55:57.392590 duration_in_ms=6763.186
2018-11-10 19:55:57,396 [salt.state       :1780][INFO    ][20517] Running state [panko_ssl_mysql] at time 19:55:57.396461
2018-11-10 19:55:57,396 [salt.state       :1813][INFO    ][20517] Executing state test.show_notification for [panko_ssl_mysql]
2018-11-10 19:55:57,397 [salt.state       :300 ][INFO    ][20517] Running panko._ssl.mysql
2018-11-10 19:55:57,397 [salt.state       :1951][INFO    ][20517] Completed state [panko_ssl_mysql] at time 19:55:57.397460 duration_in_ms=0.999
2018-11-10 19:55:57,401 [salt.state       :1780][INFO    ][20517] Running state [/etc/panko/panko.conf] at time 19:55:57.401363
2018-11-10 19:55:57,401 [salt.state       :1813][INFO    ][20517] Executing state file.managed for [/etc/panko/panko.conf]
2018-11-10 19:55:57,431 [salt.fileclient  :1219][INFO    ][20517] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-11-10 19:55:57,502 [salt.fileclient  :1219][INFO    ][20517] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-11-10 19:55:57,530 [salt.fileclient  :1219][INFO    ][20517] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-11-10 19:55:57,650 [salt.state       :300 ][INFO    ][20517] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -362,36 +377,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -466,110 +451,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-11-10 19:55:57,651 [salt.state       :1951][INFO    ][20517] Completed state [/etc/panko/panko.conf] at time 19:55:57.651379 duration_in_ms=250.015
2018-11-10 19:55:57,652 [salt.state       :1780][INFO    ][20517] Running state [panko-dbsync] at time 19:55:57.651965
2018-11-10 19:55:57,652 [salt.state       :1813][INFO    ][20517] Executing state cmd.run for [panko-dbsync]
2018-11-10 19:55:57,655 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command '/bin/false' in directory '/root'
2018-11-10 19:55:57,683 [salt.state       :300 ][INFO    ][20517] onlyif execution failed
2018-11-10 19:55:57,684 [salt.state       :1951][INFO    ][20517] Completed state [panko-dbsync] at time 19:55:57.684205 duration_in_ms=32.24
2018-11-10 19:55:57,696 [salt.state       :1780][INFO    ][20517] Running state [wsgi_panko] at time 19:55:57.696147
2018-11-10 19:55:57,696 [salt.state       :1813][INFO    ][20517] Executing state apache_site.enabled for [wsgi_panko]
2018-11-10 19:55:57,697 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-11-10 19:55:57,838 [salt.state       :300 ][INFO    ][20517] {'new': 'wsgi_panko', 'old': None}
2018-11-10 19:55:57,839 [salt.state       :1951][INFO    ][20517] Completed state [wsgi_panko] at time 19:55:57.839230 duration_in_ms=143.083
2018-11-10 19:55:58,541 [salt.state       :1780][INFO    ][20517] Running state [apache2] at time 19:55:58.541711
2018-11-10 19:55:58,542 [salt.state       :1813][INFO    ][20517] Executing state service.running for [apache2]
2018-11-10 19:55:58,543 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:55:58,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:55:58,600 [salt.state       :300 ][INFO    ][20517] The service apache2 is already running
2018-11-10 19:55:58,601 [salt.state       :1951][INFO    ][20517] Completed state [apache2] at time 19:55:58.601450 duration_in_ms=59.74
2018-11-10 19:55:58,602 [salt.state       :1780][INFO    ][20517] Running state [apache2] at time 19:55:58.602434
2018-11-10 19:55:58,606 [salt.state       :1813][INFO    ][20517] Executing state service.mod_watch for [apache2]
2018-11-10 19:55:58,607 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:55:58,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20517] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-11-10 19:56:01,020 [salt.state       :300 ][INFO    ][20517] {'apache2': True}
2018-11-10 19:56:01,022 [salt.state       :1951][INFO    ][20517] Completed state [apache2] at time 19:56:01.022519 duration_in_ms=2420.085
2018-11-10 19:56:01,031 [salt.minion      :1711][INFO    ][20517] Returning information for job: 20181110195540119566
2018-11-10 19:56:17,116 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command test.ping with jid 20181110195617090751
2018-11-10 19:56:17,141 [salt.minion      :1432][INFO    ][21314] Starting a new job with PID 21314
2018-11-10 19:56:17,171 [salt.minion      :1711][INFO    ][21314] Returning information for job: 20181110195617090751
2018-11-10 19:57:47,998 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110195747973264
2018-11-10 19:57:48,020 [salt.minion      :1432][INFO    ][21319] Starting a new job with PID 21319
2018-11-10 19:57:53,119 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195753093584
2018-11-10 19:57:53,141 [salt.minion      :1432][INFO    ][21336] Starting a new job with PID 21336
2018-11-10 19:57:53,165 [salt.minion      :1711][INFO    ][21336] Returning information for job: 20181110195753093584
2018-11-10 19:57:53,592 [salt.state       :915 ][INFO    ][21319] Loading fresh modules for state activity
2018-11-10 19:57:53,667 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-11-10 19:57:53,712 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-11-10 19:57:53,928 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/db/offline_sync.sls'
2018-11-10 19:57:53,995 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-11-10 19:57:54,077 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-11-10 19:57:56,952 [salt.state       :1780][INFO    ][21319] Running state [aodh-api] at time 19:57:56.952365
2018-11-10 19:57:56,953 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [aodh-api]
2018-11-10 19:57:56,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:57:57,506 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-11-10 19:57:57,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 19:58:00,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:58:00,241 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-11-10 19:58:03,234 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195803204230
2018-11-10 19:58:03,254 [salt.minion      :1432][INFO    ][21823] Starting a new job with PID 21823
2018-11-10 19:58:03,282 [salt.minion      :1711][INFO    ][21823] Returning information for job: 20181110195803204230
2018-11-10 19:58:13,398 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195813372383
2018-11-10 19:58:13,425 [salt.minion      :1432][INFO    ][25187] Starting a new job with PID 25187
2018-11-10 19:58:13,454 [salt.minion      :1711][INFO    ][25187] Returning information for job: 20181110195813372383
2018-11-10 19:58:17,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:58:17,969 [salt.state       :300 ][INFO    ][21319] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'c++-compiler' changed from 'absent' to '1'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-138.164'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-11-10 19:58:18,015 [salt.state       :915 ][INFO    ][21319] Loading fresh modules for state activity
2018-11-10 19:58:18,289 [salt.state       :1951][INFO    ][21319] Completed state [aodh-api] at time 19:58:18.289803 duration_in_ms=21337.439
2018-11-10 19:58:18,296 [salt.state       :1780][INFO    ][21319] Running state [aodh-evaluator] at time 19:58:18.296927
2018-11-10 19:58:18,297 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [aodh-evaluator]
2018-11-10 19:58:19,349 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:58:19,390 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-11-10 19:58:23,399 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:58:23,460 [salt.state       :300 ][INFO    ][21319] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-10 19:58:23,497 [salt.state       :915 ][INFO    ][21319] Loading fresh modules for state activity
2018-11-10 19:58:23,557 [salt.state       :1951][INFO    ][21319] Completed state [aodh-evaluator] at time 19:58:23.557027 duration_in_ms=5260.099
2018-11-10 19:58:23,572 [salt.state       :1780][INFO    ][21319] Running state [aodh-notifier] at time 19:58:23.572762
2018-11-10 19:58:23,573 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [aodh-notifier]
2018-11-10 19:58:24,736 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195823527481
2018-11-10 19:58:24,771 [salt.minion      :1432][INFO    ][27271] Starting a new job with PID 27271
2018-11-10 19:58:24,798 [salt.minion      :1711][INFO    ][27271] Returning information for job: 20181110195823527481
2018-11-10 19:58:24,873 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:58:24,913 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-11-10 19:58:28,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:58:28,894 [salt.state       :300 ][INFO    ][21319] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-10 19:58:28,931 [salt.state       :915 ][INFO    ][21319] Loading fresh modules for state activity
2018-11-10 19:58:28,980 [salt.state       :1951][INFO    ][21319] Completed state [aodh-notifier] at time 19:58:28.980352 duration_in_ms=5407.589
2018-11-10 19:58:28,991 [salt.state       :1780][INFO    ][21319] Running state [aodh-listener] at time 19:58:28.991363
2018-11-10 19:58:28,991 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [aodh-listener]
2018-11-10 19:58:30,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:58:30,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-11-10 19:58:33,624 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195833599234
2018-11-10 19:58:33,652 [salt.minion      :1432][INFO    ][27827] Starting a new job with PID 27827
2018-11-10 19:58:33,716 [salt.minion      :1711][INFO    ][27827] Returning information for job: 20181110195833599234
2018-11-10 19:58:34,301 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:58:34,359 [salt.state       :300 ][INFO    ][21319] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-10 19:58:34,396 [salt.state       :915 ][INFO    ][21319] Loading fresh modules for state activity
2018-11-10 19:58:34,445 [salt.state       :1951][INFO    ][21319] Completed state [aodh-listener] at time 19:58:34.445110 duration_in_ms=5453.746
2018-11-10 19:58:34,455 [salt.state       :1780][INFO    ][21319] Running state [python-aodhclient] at time 19:58:34.455014
2018-11-10 19:58:34,455 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [python-aodhclient]
2018-11-10 19:58:35,689 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 19:58:35,736 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-11-10 19:58:38,357 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 19:58:38,418 [salt.state       :300 ][INFO    ][21319] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-11-10 19:58:38,457 [salt.state       :915 ][INFO    ][21319] Loading fresh modules for state activity
2018-11-10 19:58:38,508 [salt.state       :1951][INFO    ][21319] Completed state [python-aodhclient] at time 19:58:38.508172 duration_in_ms=4053.157
2018-11-10 19:58:38,519 [salt.state       :1780][INFO    ][21319] Running state [aodh_ssl_mysql] at time 19:58:38.519148
2018-11-10 19:58:38,519 [salt.state       :1813][INFO    ][21319] Executing state test.show_notification for [aodh_ssl_mysql]
2018-11-10 19:58:38,519 [salt.state       :300 ][INFO    ][21319] Running aodh._ssl.mysql
2018-11-10 19:58:38,520 [salt.state       :1951][INFO    ][21319] Completed state [aodh_ssl_mysql] at time 19:58:38.520036 duration_in_ms=0.889
2018-11-10 19:58:38,521 [salt.state       :1780][INFO    ][21319] Running state [aodh_ssl_rabbitmq] at time 19:58:38.521137
2018-11-10 19:58:38,521 [salt.state       :1813][INFO    ][21319] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-11-10 19:58:38,522 [salt.state       :300 ][INFO    ][21319] Running aodh._ssl.rabbitmq
2018-11-10 19:58:38,522 [salt.state       :1951][INFO    ][21319] Completed state [aodh_ssl_rabbitmq] at time 19:58:38.522204 duration_in_ms=1.067
2018-11-10 19:58:38,524 [salt.state       :1780][INFO    ][21319] Running state [/etc/aodh/aodh.conf] at time 19:58:38.524188
2018-11-10 19:58:38,524 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-11-10 19:58:38,565 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-11-10 19:58:38,663 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-11-10 19:58:38,797 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-11-10 19:58:38,820 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-11-10 19:58:38,853 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-11-10 19:58:38,906 [salt.state       :300 ][INFO    ][21319] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.34
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +1121,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +1137,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +1175,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -671,36 +1189,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -775,995 +1263,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-11-10 19:58:38,916 [salt.state       :1951][INFO    ][21319] Completed state [/etc/aodh/aodh.conf] at time 19:58:38.916411 duration_in_ms=392.222
2018-11-10 19:58:38,917 [salt.state       :1780][INFO    ][21319] Running state [aodh-dbsync] at time 19:58:38.917727
2018-11-10 19:58:38,918 [salt.state       :1813][INFO    ][21319] Executing state cmd.run for [aodh-dbsync]
2018-11-10 19:58:38,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command '/bin/false' in directory '/root'
2018-11-10 19:58:38,992 [salt.state       :300 ][INFO    ][21319] onlyif execution failed
2018-11-10 19:58:38,992 [salt.state       :1951][INFO    ][21319] Completed state [aodh-dbsync] at time 19:58:38.992549 duration_in_ms=74.821
2018-11-10 19:58:39,001 [salt.state       :1780][INFO    ][21319] Running state [apache2] at time 19:58:39.001435
2018-11-10 19:58:39,001 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [apache2]
2018-11-10 19:58:40,446 [salt.state       :300 ][INFO    ][21319] All specified packages are already installed
2018-11-10 19:58:40,446 [salt.state       :1951][INFO    ][21319] Completed state [apache2] at time 19:58:40.446863 duration_in_ms=1445.428
2018-11-10 19:58:40,447 [salt.state       :1780][INFO    ][21319] Running state [openssl] at time 19:58:40.447286
2018-11-10 19:58:40,448 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [openssl]
2018-11-10 19:58:40,460 [salt.state       :300 ][INFO    ][21319] All specified packages are already installed
2018-11-10 19:58:40,461 [salt.state       :1951][INFO    ][21319] Completed state [openssl] at time 19:58:40.461155 duration_in_ms=13.869
2018-11-10 19:58:40,461 [salt.state       :1780][INFO    ][21319] Running state [a2enmod rewrite] at time 19:58:40.461946
2018-11-10 19:58:40,462 [salt.state       :1813][INFO    ][21319] Executing state cmd.run for [a2enmod rewrite]
2018-11-10 19:58:40,462 [salt.state       :300 ][INFO    ][21319] /etc/apache2/mods-enabled/rewrite.load exists
2018-11-10 19:58:40,462 [salt.state       :1951][INFO    ][21319] Completed state [a2enmod rewrite] at time 19:58:40.462874 duration_in_ms=0.928
2018-11-10 19:58:40,464 [salt.state       :1780][INFO    ][21319] Running state [libapache2-mod-wsgi] at time 19:58:40.464434
2018-11-10 19:58:40,464 [salt.state       :1813][INFO    ][21319] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-10 19:58:40,479 [salt.state       :300 ][INFO    ][21319] All specified packages are already installed
2018-11-10 19:58:40,479 [salt.state       :1951][INFO    ][21319] Completed state [libapache2-mod-wsgi] at time 19:58:40.479418 duration_in_ms=14.984
2018-11-10 19:58:40,480 [salt.state       :1780][INFO    ][21319] Running state [a2enmod wsgi] at time 19:58:40.480289
2018-11-10 19:58:40,480 [salt.state       :1813][INFO    ][21319] Executing state cmd.run for [a2enmod wsgi]
2018-11-10 19:58:40,481 [salt.state       :300 ][INFO    ][21319] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-10 19:58:40,481 [salt.state       :1951][INFO    ][21319] Completed state [a2enmod wsgi] at time 19:58:40.481175 duration_in_ms=0.887
2018-11-10 19:58:40,484 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 19:58:40.483995
2018-11-10 19:58:40,484 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-10 19:58:40,585 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-11-10 19:58:40,585 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 19:58:40.585726 duration_in_ms=101.731
2018-11-10 19:58:40,586 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 19:58:40.586122
2018-11-10 19:58:40,586 [salt.state       :1813][INFO    ][21319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-10 19:58:40,587 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-10 19:58:40,588 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 19:58:40.588081 duration_in_ms=1.959
2018-11-10 19:58:40,588 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 19:58:40.588453
2018-11-10 19:58:40,589 [salt.state       :1813][INFO    ][21319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-10 19:58:40,589 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-11-10 19:58:40,589 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 19:58:40.589944 duration_in_ms=1.491
2018-11-10 19:58:40,591 [salt.state       :1780][INFO    ][21319] Running state [a2enmod mpm_prefork] at time 19:58:40.591804
2018-11-10 19:58:40,592 [salt.state       :1813][INFO    ][21319] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-10 19:58:40,592 [salt.state       :300 ][INFO    ][21319] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-11-10 19:58:40,592 [salt.state       :1951][INFO    ][21319] Completed state [a2enmod mpm_prefork] at time 19:58:40.592936 duration_in_ms=1.132
2018-11-10 19:58:40,593 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 19:58:40.593273
2018-11-10 19:58:40,593 [salt.state       :1813][INFO    ][21319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-10 19:58:40,594 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-10 19:58:40,594 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 19:58:40.594285 duration_in_ms=1.012
2018-11-10 19:58:40,595 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 19:58:40.595261
2018-11-10 19:58:40,595 [salt.state       :1813][INFO    ][21319] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-10 19:58:40,596 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-11-10 19:58:40,596 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 19:58:40.596268 duration_in_ms=1.007
2018-11-10 19:58:40,596 [salt.state       :1780][INFO    ][21319] Running state [apache_server_service_task] at time 19:58:40.596600
2018-11-10 19:58:40,596 [salt.state       :1813][INFO    ][21319] Executing state test.show_notification for [apache_server_service_task]
2018-11-10 19:58:40,597 [salt.state       :300 ][INFO    ][21319] Running apache.server.service
2018-11-10 19:58:40,598 [salt.state       :1951][INFO    ][21319] Completed state [apache_server_service_task] at time 19:58:40.598005 duration_in_ms=1.406
2018-11-10 19:58:40,598 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/ports.conf] at time 19:58:40.598619
2018-11-10 19:58:40,598 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-10 19:58:40,693 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/ports.conf is in the correct state
2018-11-10 19:58:40,694 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/ports.conf] at time 19:58:40.694181 duration_in_ms=95.562
2018-11-10 19:58:40,694 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/conf-available/security.conf] at time 19:58:40.694842
2018-11-10 19:58:40,695 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-10 19:58:40,796 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/conf-available/security.conf is in the correct state
2018-11-10 19:58:40,797 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/conf-available/security.conf] at time 19:58:40.796984 duration_in_ms=102.141
2018-11-10 19:58:40,808 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 19:58:40.808616
2018-11-10 19:58:40,809 [salt.state       :1813][INFO    ][21319] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-10 19:58:40,809 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-11-10 19:58:40,809 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 19:58:40.809751 duration_in_ms=1.135
2018-11-10 19:58:40,810 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 19:58:40.810397
2018-11-10 19:58:40,810 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-10 19:58:41,119 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-11-10 19:58:41,120 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 19:58:41.120205 duration_in_ms=309.808
2018-11-10 19:58:41,120 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 19:58:41.120893
2018-11-10 19:58:41,121 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-10 19:58:41,411 [salt.state       :300 ][INFO    ][21319] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-11-10 19:58:41,412 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 19:58:41.412433 duration_in_ms=291.542
2018-11-10 19:58:41,415 [salt.state       :1780][INFO    ][21319] Running state [apache2] at time 19:58:41.415101
2018-11-10 19:58:41,415 [salt.state       :1813][INFO    ][21319] Executing state service.running for [apache2]
2018-11-10 19:58:41,416 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-10 19:58:41,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:58:41,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:58:41,504 [salt.state       :300 ][INFO    ][21319] The service apache2 is already running
2018-11-10 19:58:41,505 [salt.state       :1951][INFO    ][21319] Completed state [apache2] at time 19:58:41.505545 duration_in_ms=90.444
2018-11-10 19:58:41,507 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/conf-enabled/security.conf] at time 19:58:41.507935
2018-11-10 19:58:41,508 [salt.state       :1813][INFO    ][21319] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-10 19:58:41,512 [salt.state       :300 ][INFO    ][21319] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-11-10 19:58:41,513 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/conf-enabled/security.conf] at time 19:58:41.513115 duration_in_ms=5.18
2018-11-10 19:58:41,514 [salt.state       :1780][INFO    ][21319] Running state [/etc/default/aodh-evaluator] at time 19:58:41.514915
2018-11-10 19:58:41,515 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-11-10 19:58:41,542 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-11-10 19:58:41,559 [salt.state       :300 ][INFO    ][21319] File changed:
New file
2018-11-10 19:58:41,559 [salt.state       :1951][INFO    ][21319] Completed state [/etc/default/aodh-evaluator] at time 19:58:41.559523 duration_in_ms=44.608
2018-11-10 19:58:41,560 [salt.state       :1780][INFO    ][21319] Running state [/etc/default/aodh-notifier] at time 19:58:41.560534
2018-11-10 19:58:41,561 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/default/aodh-notifier]
2018-11-10 19:58:41,593 [salt.state       :300 ][INFO    ][21319] File changed:
New file
2018-11-10 19:58:41,594 [salt.state       :1951][INFO    ][21319] Completed state [/etc/default/aodh-notifier] at time 19:58:41.594257 duration_in_ms=33.723
2018-11-10 19:58:41,594 [salt.state       :1780][INFO    ][21319] Running state [/etc/default/aodh-listener] at time 19:58:41.594899
2018-11-10 19:58:41,595 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/default/aodh-listener]
2018-11-10 19:58:41,621 [salt.state       :300 ][INFO    ][21319] File changed:
New file
2018-11-10 19:58:41,622 [salt.state       :1951][INFO    ][21319] Completed state [/etc/default/aodh-listener] at time 19:58:41.622208 duration_in_ms=27.309
2018-11-10 19:58:41,622 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 19:58:41.622885
2018-11-10 19:58:41,623 [salt.state       :1813][INFO    ][21319] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-11-10 19:58:41,647 [salt.fileclient  :1219][INFO    ][21319] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-11-10 19:58:41,698 [salt.state       :300 ][INFO    ][21319] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.34:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-11-10 19:58:41,700 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 19:58:41.699995 duration_in_ms=77.11
2018-11-10 19:58:41,701 [salt.state       :1780][INFO    ][21319] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 19:58:41.701056
2018-11-10 19:58:41,701 [salt.state       :1813][INFO    ][21319] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-11-10 19:58:41,703 [salt.state       :300 ][INFO    ][21319] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-11-10 19:58:41,703 [salt.state       :1951][INFO    ][21319] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 19:58:41.703716 duration_in_ms=2.66
2018-11-10 19:58:41,705 [salt.state       :1780][INFO    ][21319] Running state [apache2] at time 19:58:41.705296
2018-11-10 19:58:41,705 [salt.state       :1813][INFO    ][21319] Executing state service.running for [apache2]
2018-11-10 19:58:41,706 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:58:41,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-10 19:58:41,764 [salt.state       :300 ][INFO    ][21319] The service apache2 is already running
2018-11-10 19:58:41,765 [salt.state       :1951][INFO    ][21319] Completed state [apache2] at time 19:58:41.765553 duration_in_ms=60.256
2018-11-10 19:58:41,766 [salt.state       :1780][INFO    ][21319] Running state [apache2] at time 19:58:41.766139
2018-11-10 19:58:41,767 [salt.state       :1813][INFO    ][21319] Executing state service.mod_watch for [apache2]
2018-11-10 19:58:41,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-10 19:58:41,800 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-11-10 19:58:43,845 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195843816496
2018-11-10 19:58:43,867 [salt.minion      :1432][INFO    ][28167] Starting a new job with PID 28167
2018-11-10 19:58:43,932 [salt.minion      :1711][INFO    ][28167] Returning information for job: 20181110195843816496
2018-11-10 19:58:44,200 [salt.state       :300 ][INFO    ][21319] {'apache2': True}
2018-11-10 19:58:44,202 [salt.state       :1951][INFO    ][21319] Completed state [apache2] at time 19:58:44.202204 duration_in_ms=2436.064
2018-11-10 19:58:44,209 [salt.state       :1780][INFO    ][21319] Running state [aodh-evaluator] at time 19:58:44.209310
2018-11-10 19:58:44,213 [salt.state       :1813][INFO    ][21319] Executing state service.running for [aodh-evaluator]
2018-11-10 19:58:44,214 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-11-10 19:58:44,246 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-11-10 19:58:44,273 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-11-10 19:58:44,294 [salt.state       :300 ][INFO    ][21319] The service aodh-evaluator is already running
2018-11-10 19:58:44,295 [salt.state       :1951][INFO    ][21319] Completed state [aodh-evaluator] at time 19:58:44.295392 duration_in_ms=86.081
2018-11-10 19:58:44,296 [salt.state       :1780][INFO    ][21319] Running state [aodh-evaluator] at time 19:58:44.296268
2018-11-10 19:58:44,296 [salt.state       :1813][INFO    ][21319] Executing state service.mod_watch for [aodh-evaluator]
2018-11-10 19:58:44,298 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-11-10 19:58:44,323 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-11-10 19:58:44,498 [salt.state       :300 ][INFO    ][21319] {'aodh-evaluator': True}
2018-11-10 19:58:44,499 [salt.state       :1951][INFO    ][21319] Completed state [aodh-evaluator] at time 19:58:44.498971 duration_in_ms=202.702
2018-11-10 19:58:44,510 [salt.state       :1780][INFO    ][21319] Running state [aodh-notifier] at time 19:58:44.510673
2018-11-10 19:58:44,511 [salt.state       :1813][INFO    ][21319] Executing state service.running for [aodh-notifier]
2018-11-10 19:58:44,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-11-10 19:58:44,570 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-11-10 19:58:44,610 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-11-10 19:58:44,653 [salt.state       :300 ][INFO    ][21319] The service aodh-notifier is already running
2018-11-10 19:58:44,657 [salt.state       :1951][INFO    ][21319] Completed state [aodh-notifier] at time 19:58:44.656894 duration_in_ms=146.22
2018-11-10 19:58:44,657 [salt.state       :1780][INFO    ][21319] Running state [aodh-notifier] at time 19:58:44.657398
2018-11-10 19:58:44,658 [salt.state       :1813][INFO    ][21319] Executing state service.mod_watch for [aodh-notifier]
2018-11-10 19:58:44,659 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-11-10 19:58:44,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-11-10 19:58:48,149 [salt.utils.schedule:1377][INFO    ][2985] Running scheduled job: __mine_interval
2018-11-10 19:58:54,066 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195854037381
2018-11-10 19:58:54,093 [salt.minion      :1432][INFO    ][28303] Starting a new job with PID 28303
2018-11-10 19:58:54,116 [salt.minion      :1711][INFO    ][28303] Returning information for job: 20181110195854037381
2018-11-10 19:58:59,809 [salt.state       :300 ][INFO    ][21319] {'aodh-notifier': True}
2018-11-10 19:58:59,810 [salt.state       :1951][INFO    ][21319] Completed state [aodh-notifier] at time 19:58:59.810136 duration_in_ms=15152.737
2018-11-10 19:58:59,815 [salt.state       :1780][INFO    ][21319] Running state [aodh-listener] at time 19:58:59.815027
2018-11-10 19:58:59,819 [salt.state       :1813][INFO    ][21319] Executing state service.running for [aodh-listener]
2018-11-10 19:58:59,821 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-11-10 19:58:59,864 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-11-10 19:58:59,883 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-11-10 19:58:59,903 [salt.state       :300 ][INFO    ][21319] The service aodh-listener is already running
2018-11-10 19:58:59,903 [salt.state       :1951][INFO    ][21319] Completed state [aodh-listener] at time 19:58:59.903614 duration_in_ms=88.587
2018-11-10 19:58:59,904 [salt.state       :1780][INFO    ][21319] Running state [aodh-listener] at time 19:58:59.903966
2018-11-10 19:58:59,904 [salt.state       :1813][INFO    ][21319] Executing state service.mod_watch for [aodh-listener]
2018-11-10 19:58:59,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-11-10 19:58:59,927 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21319] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-11-10 19:59:04,238 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195904208465
2018-11-10 19:59:04,262 [salt.minion      :1432][INFO    ][28376] Starting a new job with PID 28376
2018-11-10 19:59:04,288 [salt.minion      :1711][INFO    ][28376] Returning information for job: 20181110195904208465
2018-11-10 19:59:14,419 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110195914387245
2018-11-10 19:59:14,442 [salt.minion      :1432][INFO    ][28381] Starting a new job with PID 28381
2018-11-10 19:59:14,474 [salt.minion      :1711][INFO    ][28381] Returning information for job: 20181110195914387245
2018-11-10 19:59:15,050 [salt.state       :300 ][INFO    ][21319] {'aodh-listener': True}
2018-11-10 19:59:15,051 [salt.state       :1951][INFO    ][21319] Completed state [aodh-listener] at time 19:59:15.051245 duration_in_ms=15147.278
2018-11-10 19:59:15,058 [salt.minion      :1711][INFO    ][21319] Returning information for job: 20181110195747973264
2018-11-10 20:00:39,069 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command state.sls with jid 20181110200039045918
2018-11-10 20:00:39,095 [salt.minion      :1432][INFO    ][28447] Starting a new job with PID 28447
2018-11-10 20:00:44,162 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110200044133887
2018-11-10 20:00:44,185 [salt.minion      :1432][INFO    ][28452] Starting a new job with PID 28452
2018-11-10 20:00:44,209 [salt.minion      :1711][INFO    ][28452] Returning information for job: 20181110200044133887
2018-11-10 20:00:44,983 [salt.state       :915 ][INFO    ][28447] Loading fresh modules for state activity
2018-11-10 20:00:45,134 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-11-10 20:00:45,179 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-11-10 20:00:45,407 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2018-11-10 20:00:47,796 [salt.state       :1780][INFO    ][28447] Running state [ceilometer-agent-central] at time 20:00:47.796570
2018-11-10 20:00:47,798 [salt.state       :1813][INFO    ][28447] Executing state pkg.installed for [ceilometer-agent-central]
2018-11-10 20:00:47,799 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 20:00:48,385 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-11-10 20:00:48,567 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-10 20:00:51,030 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 20:00:51,078 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-11-10 20:00:54,332 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110200054304839
2018-11-10 20:00:54,355 [salt.minion      :1432][INFO    ][28931] Starting a new job with PID 28931
2018-11-10 20:00:54,377 [salt.minion      :1711][INFO    ][28931] Returning information for job: 20181110200054304839
2018-11-10 20:01:04,560 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110200104528420
2018-11-10 20:01:04,584 [salt.minion      :1432][INFO    ][30489] Starting a new job with PID 30489
2018-11-10 20:01:04,611 [salt.minion      :1711][INFO    ][30489] Returning information for job: 20181110200104528420
2018-11-10 20:01:14,784 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command saltutil.find_job with jid 20181110200114752304
2018-11-10 20:01:14,810 [salt.minion      :1432][INFO    ][30949] Starting a new job with PID 30949
2018-11-10 20:01:14,836 [salt.minion      :1711][INFO    ][30949] Returning information for job: 20181110200114752304
2018-11-10 20:01:15,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 20:01:15,206 [salt.state       :300 ][INFO    ][28447] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-11-10 20:01:15,248 [salt.state       :915 ][INFO    ][28447] Loading fresh modules for state activity
2018-11-10 20:01:15,511 [salt.state       :1951][INFO    ][28447] Completed state [ceilometer-agent-central] at time 20:01:15.511222 duration_in_ms=27714.654
2018-11-10 20:01:15,521 [salt.state       :1780][INFO    ][28447] Running state [python-ceilometerclient] at time 20:01:15.520959
2018-11-10 20:01:15,521 [salt.state       :1813][INFO    ][28447] Executing state pkg.installed for [python-ceilometerclient]
2018-11-10 20:01:16,540 [salt.state       :300 ][INFO    ][28447] All specified packages are already installed
2018-11-10 20:01:16,541 [salt.state       :1951][INFO    ][28447] Completed state [python-ceilometerclient] at time 20:01:16.541574 duration_in_ms=1020.614
2018-11-10 20:01:16,542 [salt.state       :1780][INFO    ][28447] Running state [ceilometer-agent-notification] at time 20:01:16.541968
2018-11-10 20:01:16,542 [salt.state       :1813][INFO    ][28447] Executing state pkg.installed for [ceilometer-agent-notification]
2018-11-10 20:01:16,585 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-10 20:01:16,631 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-11-10 20:01:20,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-10 20:01:20,848 [salt.state       :300 ][INFO    ][28447] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp13'

2018-11-10 20:01:20,885 [salt.state       :915 ][INFO    ][28447] Loading fresh modules for state activity
2018-11-10 20:01:20,939 [salt.state       :1951][INFO    ][28447] Completed state [ceilometer-agent-notification] at time 20:01:20.939177 duration_in_ms=4397.208
2018-11-10 20:01:20,944 [salt.state       :1780][INFO    ][28447] Running state [ceilometer_ssl_rabbitmq] at time 20:01:20.944069
2018-11-10 20:01:20,945 [salt.state       :1813][INFO    ][28447] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2018-11-10 20:01:20,946 [salt.state       :300 ][INFO    ][28447] Running ceilometer._ssl.rabbitmq
2018-11-10 20:01:20,946 [salt.state       :1951][INFO    ][28447] Completed state [ceilometer_ssl_rabbitmq] at time 20:01:20.946644 duration_in_ms=2.574
2018-11-10 20:01:20,950 [salt.state       :1780][INFO    ][28447] Running state [/etc/ceilometer/ceilometer.conf] at time 20:01:20.950490
2018-11-10 20:01:20,951 [salt.state       :1813][INFO    ][28447] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-11-10 20:01:20,989 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-11-10 20:01:21,270 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-11-10 20:01:21,323 [salt.state       :300 ][INFO    ][28447] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-qiuSbH/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-11-10 20:01:21,331 [salt.state       :1951][INFO    ][28447] Completed state [/etc/ceilometer/ceilometer.conf] at time 20:01:21.324439 duration_in_ms=373.948
2018-11-10 20:01:21,331 [salt.state       :1780][INFO    ][28447] Running state [/etc/default/ceilometer-agent-central] at time 20:01:21.331795
2018-11-10 20:01:21,332 [salt.state       :1813][INFO    ][28447] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-11-10 20:01:21,354 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-11-10 20:01:21,370 [salt.state       :300 ][INFO    ][28447] File changed:
New file
2018-11-10 20:01:21,370 [salt.state       :1951][INFO    ][28447] Completed state [/etc/default/ceilometer-agent-central] at time 20:01:21.370191 duration_in_ms=38.395
2018-11-10 20:01:21,370 [salt.state       :1780][INFO    ][28447] Running state [/etc/default/ceilometer-agent-notification] at time 20:01:21.370632
2018-11-10 20:01:21,370 [salt.state       :1813][INFO    ][28447] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-11-10 20:01:21,441 [salt.state       :300 ][INFO    ][28447] File changed:
New file
2018-11-10 20:01:21,441 [salt.state       :1951][INFO    ][28447] Completed state [/etc/default/ceilometer-agent-notification] at time 20:01:21.441445 duration_in_ms=70.813
2018-11-10 20:01:21,469 [salt.state       :1780][INFO    ][28447] Running state [python-gnocchiclient] at time 20:01:21.469593
2018-11-10 20:01:21,469 [salt.state       :1813][INFO    ][28447] Executing state pkg.latest for [python-gnocchiclient]
2018-11-10 20:01:21,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-11-10 20:01:22,007 [salt.state       :300 ][INFO    ][28447] Package python-gnocchiclient is already up-to-date
2018-11-10 20:01:22,008 [salt.state       :1951][INFO    ][28447] Completed state [python-gnocchiclient] at time 20:01:22.008269 duration_in_ms=538.675
2018-11-10 20:01:22,008 [salt.state       :1780][INFO    ][28447] Running state [/etc/ceilometer/pipeline.yaml] at time 20:01:22.008943
2018-11-10 20:01:22,009 [salt.state       :1813][INFO    ][28447] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-11-10 20:01:22,031 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-11-10 20:01:22,192 [salt.state       :300 ][INFO    ][28447] File changed:
New file
2018-11-10 20:01:22,192 [salt.state       :1951][INFO    ][28447] Completed state [/etc/ceilometer/pipeline.yaml] at time 20:01:22.192568 duration_in_ms=183.625
2018-11-10 20:01:22,193 [salt.state       :1780][INFO    ][28447] Running state [/etc/ceilometer/event_pipeline.yaml] at time 20:01:22.193027
2018-11-10 20:01:22,193 [salt.state       :1813][INFO    ][28447] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-11-10 20:01:22,214 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-11-10 20:01:22,358 [salt.state       :300 ][INFO    ][28447] File changed:
New file
2018-11-10 20:01:22,358 [salt.state       :1951][INFO    ][28447] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 20:01:22.358917 duration_in_ms=165.89
2018-11-10 20:01:22,359 [salt.state       :1780][INFO    ][28447] Running state [/etc/ceilometer/event_definitions.yaml] at time 20:01:22.359350
2018-11-10 20:01:22,359 [salt.state       :1813][INFO    ][28447] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-11-10 20:01:22,395 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-11-10 20:01:22,426 [salt.state       :300 ][INFO    ][28447] File changed:
New file
2018-11-10 20:01:22,426 [salt.state       :1951][INFO    ][28447] Completed state [/etc/ceilometer/event_definitions.yaml] at time 20:01:22.426635 duration_in_ms=67.285
2018-11-10 20:01:22,427 [salt.state       :1780][INFO    ][28447] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 20:01:22.427040
2018-11-10 20:01:22,427 [salt.state       :1813][INFO    ][28447] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-11-10 20:01:22,444 [salt.fileclient  :1219][INFO    ][28447] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-11-10 20:01:22,457 [salt.state       :300 ][INFO    ][28447] File changed:
New file
2018-11-10 20:01:22,458 [salt.state       :1951][INFO    ][28447] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 20:01:22.457951 duration_in_ms=30.911
2018-11-10 20:01:23,274 [salt.state       :1780][INFO    ][28447] Running state [ceilometer-agent-central] at time 20:01:23.274183
2018-11-10 20:01:23,274 [salt.state       :1813][INFO    ][28447] Executing state service.running for [ceilometer-agent-central]
2018-11-10 20:01:23,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-11-10 20:01:23,299 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-10 20:01:23,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-10 20:01:23,336 [salt.state       :300 ][INFO    ][28447] The service ceilometer-agent-central is already running
2018-11-10 20:01:23,337 [salt.state       :1951][INFO    ][28447] Completed state [ceilometer-agent-central] at time 20:01:23.336985 duration_in_ms=62.806
2018-11-10 20:01:23,337 [salt.state       :1780][INFO    ][28447] Running state [ceilometer-agent-central] at time 20:01:23.337438
2018-11-10 20:01:23,338 [salt.state       :1813][INFO    ][28447] Executing state service.mod_watch for [ceilometer-agent-central]
2018-11-10 20:01:23,339 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-10 20:01:23,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-10 20:01:23,587 [salt.state       :300 ][INFO    ][28447] {'ceilometer-agent-central': True}
2018-11-10 20:01:23,587 [salt.state       :1951][INFO    ][28447] Completed state [ceilometer-agent-central] at time 20:01:23.587623 duration_in_ms=250.184
2018-11-10 20:01:23,594 [salt.state       :1780][INFO    ][28447] Running state [ceilometer-agent-notification] at time 20:01:23.594663
2018-11-10 20:01:23,595 [salt.state       :1813][INFO    ][28447] Executing state service.running for [ceilometer-agent-notification]
2018-11-10 20:01:23,596 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-11-10 20:01:23,645 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-10 20:01:23,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-10 20:01:23,705 [salt.state       :300 ][INFO    ][28447] The service ceilometer-agent-notification is already running
2018-11-10 20:01:23,706 [salt.state       :1951][INFO    ][28447] Completed state [ceilometer-agent-notification] at time 20:01:23.706193 duration_in_ms=111.53
2018-11-10 20:01:23,707 [salt.state       :1780][INFO    ][28447] Running state [ceilometer-agent-notification] at time 20:01:23.707019
2018-11-10 20:01:23,707 [salt.state       :1813][INFO    ][28447] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-11-10 20:01:23,713 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-10 20:01:23,746 [salt.loaded.int.module.cmdmod:395 ][INFO    ][28447] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-10 20:01:23,959 [salt.state       :300 ][INFO    ][28447] {'ceilometer-agent-notification': True}
2018-11-10 20:01:23,965 [salt.state       :1951][INFO    ][28447] Completed state [ceilometer-agent-notification] at time 20:01:23.965023 duration_in_ms=258.003
2018-11-10 20:01:23,968 [salt.minion      :1711][INFO    ][28447] Returning information for job: 20181110200039045918
2018-11-10 20:07:37,410 [salt.minion      :1308][INFO    ][2985] User sudo_ubuntu Executing command cp.push_dir with jid 20181110200737382530
2018-11-10 20:07:37,438 [salt.minion      :1432][INFO    ][31464] Starting a new job with PID 31464
