2018-11-05 16:17:57,961 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,101 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,104 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,109 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,111 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,471 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,474 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,477 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,553 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,557 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,559 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,566 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,705 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,749 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,755 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,759 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,763 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,768 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,772 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,775 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,780 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,784 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,788 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,792 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,796 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,800 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,803 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,807 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,811 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,815 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,820 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,824 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,828 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,833 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,837 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,844 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,848 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,854 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,860 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,864 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,868 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,874 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,879 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,884 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,889 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,893 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,898 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,901 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,907 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,911 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,916 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,920 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,925 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,928 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,934 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,937 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:17:58,942 [salt.utils.decorators:82  ][ERROR   ][1844] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-11-05 16:18:25,881 [salt.utils.decorators:613 ][WARNING ][1844] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-05 16:18:28,521 [salt.loaded.int.states.file:2298][WARNING ][1844] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:18:50,704 [salt.loaded.int.states.file:2298][WARNING ][1844] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:18:52,865 [salt.loaded.int.states.file:2298][WARNING ][1844] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:18:56,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3067] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-11-05 16:18:57,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3067] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-11-05 16:18:57,045 [salt.utils.parsers:1051][WARNING ][1472] Minion received a SIGTERM. Exiting.
2018-11-05 16:18:57,961 [salt.cli.daemons :293 ][INFO    ][3121] Setting up the Salt Minion "mdb01.mcp-ovs-dpdk-ha.local"
2018-11-05 16:18:58,081 [salt.cli.daemons :82  ][INFO    ][3121] Starting up the Salt Minion
2018-11-05 16:18:58,082 [salt.utils.event :1017][INFO    ][3121] Starting pull socket on /var/run/salt/minion/minion_event_19308d998f_pull.ipc
2018-11-05 16:18:58,826 [salt.minion      :976 ][INFO    ][3121] Creating minion process manager
2018-11-05 16:19:00,451 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][3121] Executing command ['date', '+%z'] in directory '/root'
2018-11-05 16:19:00,483 [salt.utils.schedule:568 ][INFO    ][3121] Updating job settings for scheduled job: __mine_interval
2018-11-05 16:19:00,488 [salt.minion      :1108][INFO    ][3121] Added mine.update to scheduler
2018-11-05 16:19:00,495 [salt.minion      :1975][INFO    ][3121] Minion is starting as user 'root'
2018-11-05 16:19:00,507 [salt.minion      :2336][INFO    ][3121] Minion is ready to receive requests!
2018-11-05 16:19:54,116 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.apply with jid 20181105161954101867
2018-11-05 16:19:54,143 [salt.minion      :1432][INFO    ][3213] Starting a new job with PID 3213
2018-11-05 16:20:00,422 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162000407944
2018-11-05 16:20:00,441 [salt.minion      :1432][INFO    ][3220] Starting a new job with PID 3220
2018-11-05 16:20:00,467 [salt.minion      :1711][INFO    ][3220] Returning information for job: 20181105162000407944
2018-11-05 16:20:01,182 [salt.state       :915 ][INFO    ][3213] Loading fresh modules for state activity
2018-11-05 16:20:03,709 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-11-05 16:20:03,750 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-11-05 16:20:03,937 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-11-05 16:20:04,651 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-11-05 16:20:04,836 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/shell.sls'
2018-11-05 16:20:04,992 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/login_defs.sls'
2018-11-05 16:20:05,148 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/at.sls'
2018-11-05 16:20:05,304 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/cron.sls'
2018-11-05 16:20:05,468 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-11-05 16:20:05,705 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-11-05 16:20:05,868 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-11-05 16:20:06,012 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-11-05 16:20:06,255 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-11-05 16:20:06,291 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-11-05 16:20:07,183 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-11-05 16:20:07,340 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-11-05 16:20:07,489 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-11-05 16:20:07,680 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-11-05 16:20:07,836 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-11-05 16:20:07,984 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/service.sls'
2018-11-05 16:20:08,135 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-11-05 16:20:08,316 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/file.sls'
2018-11-05 16:20:08,499 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-11-05 16:20:09,524 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-11-05 16:20:09,678 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-11-05 16:20:09,824 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-11-05 16:20:09,975 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-11-05 16:20:10,196 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-11-05 16:20:10,482 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-11-05 16:20:10,555 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162010538605
2018-11-05 16:20:10,580 [salt.minion      :1432][INFO    ][3283] Starting a new job with PID 3283
2018-11-05 16:20:10,602 [salt.minion      :1711][INFO    ][3283] Returning information for job: 20181105162010538605
2018-11-05 16:20:10,647 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-11-05 16:20:10,799 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/storage/mount.sls'
2018-11-05 16:20:10,976 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-11-05 16:20:11,737 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-11-05 16:20:11,798 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-11-05 16:20:11,856 [salt.state       :1780][INFO    ][3213] Running state [/etc/environment] at time 16:20:11.856164
2018-11-05 16:20:11,857 [salt.state       :1813][INFO    ][3213] Executing state file.blockreplace for [/etc/environment]
2018-11-05 16:20:11,867 [salt.state       :300 ][INFO    ][3213] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-11-05 16:20:11,869 [salt.state       :1951][INFO    ][3213] Completed state [/etc/environment] at time 16:20:11.869443 duration_in_ms=13.28
2018-11-05 16:20:11,870 [salt.state       :1780][INFO    ][3213] Running state [/etc/profile.d] at time 16:20:11.870281
2018-11-05 16:20:11,870 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/profile.d]
2018-11-05 16:20:11,874 [salt.state       :300 ][INFO    ][3213] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-11-05 16:20:11,874 [salt.state       :1951][INFO    ][3213] Completed state [/etc/profile.d] at time 16:20:11.874696 duration_in_ms=4.415
2018-11-05 16:20:11,875 [salt.state       :1780][INFO    ][3213] Running state [/etc/bash.bashrc] at time 16:20:11.875148
2018-11-05 16:20:11,875 [salt.state       :1813][INFO    ][3213] Executing state file.blockreplace for [/etc/bash.bashrc]
2018-11-05 16:20:12,858 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['git', '--version'] in directory '/root'
2018-11-05 16:20:13,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'test -f /etc/bash.bashrc' in directory '/root'
2018-11-05 16:20:13,110 [salt.state       :300 ][INFO    ][3213] File changed:
--- 
+++ 
@@ -66,3 +66,6 @@
 		fi
 	}
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-11-05 16:20:13,111 [salt.state       :1951][INFO    ][3213] Completed state [/etc/bash.bashrc] at time 16:20:13.111247 duration_in_ms=1236.098
2018-11-05 16:20:13,111 [salt.state       :1780][INFO    ][3213] Running state [/etc/profile] at time 16:20:13.111717
2018-11-05 16:20:13,112 [salt.state       :1813][INFO    ][3213] Executing state file.blockreplace for [/etc/profile]
2018-11-05 16:20:13,124 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'test -f /etc/profile' in directory '/root'
2018-11-05 16:20:13,235 [salt.state       :300 ][INFO    ][3213] File changed:
--- 
+++ 
@@ -25,3 +25,6 @@
   done
   unset i
 fi
+# BEGIN CIS 5.4.4 default user umask
+umask 027
+# END CIS 5.4.4 default user umask

2018-11-05 16:20:13,235 [salt.state       :1951][INFO    ][3213] Completed state [/etc/profile] at time 16:20:13.235795 duration_in_ms=124.076
2018-11-05 16:20:13,236 [salt.state       :1780][INFO    ][3213] Running state [/etc/login.defs] at time 16:20:13.236488
2018-11-05 16:20:13,237 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/login.defs]
2018-11-05 16:20:14,032 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/login.defs.jinja'
2018-11-05 16:20:14,176 [salt.state       :300 ][INFO    ][3213] File changed:
--- 
+++ 
@@ -1,341 +1,28 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-# REQUIRED for useradd/userdel/usermod
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define MAIL_DIR and MAIL_FILE,
-#   MAIL_DIR takes precedence.
-#
-#   Essentially:
-#      - MAIL_DIR defines the location of users mail spool files
-#        (for mbox use) by appending the username to MAIL_DIR as defined
-#        below.
-#      - MAIL_FILE defines the location of the users mail spool files as the
-#        fully-qualified filename obtained by prepending the user home
-#        directory before $MAIL_FILE
-#
-# NOTE: This is no more used for setting up users MAIL environment variable
-#       which is, starting from shadow 4.0.12-1 in Debian, entirely the
-#       job of the pam_mail PAM modules
-#       See default PAM configuration files provided for
-#       login, su, etc.
-#
-# This is a temporary situation: setting these variables will soon
-# move to /etc/default/useradd and the variables will then be
-# no more supported
-MAIL_DIR        /var/mail
-#MAIL_FILE      .mail
-
-#
-# Enable logging and display of /var/log/faillog login failure info.
-# This option conflicts with the pam_tally PAM module.
-#
-FAILLOG_ENAB		yes
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-# WARNING: Unknown usernames may become world readable. 
-# See #290803 and #298773 for details about how this could become a security
-# concern
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, login failures will be logged here in a utmp format
-# last, when invoked as lastb, will read /var/log/btmp, so...
-#
-FTMP_FILE	/var/log/btmp
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
-ENV_PATH	PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-# In Debian /usr/bin/bsd-write or similar programs are setgid tty
-# However, the default and recommended value for TTYPERM is still 0600
-# to not allow anyone to write to anyone else console or terminal
-
-# Users can still allow other people to write them by issuing 
-# the "mesg y" command.
-
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# 
-# UMASK is the default umask value for pam_umask and is used by
-# useradd and newusers to set the mode of the new home directories.
-# 022 is the "historical" value in Debian for UMASK
-# 027, or even 077, could be considered better for privacy
-# There is no One True Answer here : each sysadmin must make up his/her
-# mind.
-#
-# If USERGROUPS_ENAB is set to "yes", that will modify this UMASK default value
-# for private user groups, i. e. the uid is the same as gid, and username is
-# the same as the primary group name: for these, the user permissions will be
-# used as group permissions, e. g. 022 will become 002.
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		022
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-#SYS_UID_MIN		  100
-#SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-#SYS_GID_MIN		  100
-#SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad. This will most likely be
-# overriden by PAM, since the default pam_unix module has it's own built
-# in of 3 retries. However, this is a safe fallback in case you are using
-# an authentication module that does not enforce PAM_MAXTRIES.
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# If set to yes, userdel will remove the user´s group if it contains no
-# more members, and useradd will create by default a group with the name
-# of the user.
-#
-USERGROUPS_ENAB yes
-
-#
-# Instead of the real user shell, the program specified by this parameter
-# will be launched, although its visible name (argv[0]) will be the shell's.
-# The program may do whatever it wants (logging, additional authentification,
-# banner, ...) before running the actual shell.
-#
-# FAKE_SHELL /bin/fakeshell
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-# This variable is used by login and su.
-#
-#CONSOLE	/etc/consoles
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-# This variable is used by login and su.
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# If set to "yes", new passwords will be encrypted using the MD5-based
-# algorithm compatible with the one used by recent releases of FreeBSD.
-# It supports passwords of unlimited length and longer salt strings.
-# Set to "no" if you need to copy encrypted passwords to other systems
-# which don't understand the new algorithm.  Default is "no".
-#
-# This variable is deprecated. You should use ENCRYPT_METHOD.
-#
-#MD5_CRYPT_ENAB	no
-
-#
-# If set to MD5 , MD5-based algorithm will be used for encrypting password
-# If set to SHA256, SHA256-based algorithm will be used for encrypting password
-# If set to SHA512, SHA512-based algorithm will be used for encrypting password
-# If set to DES, DES-based algorithm will be used for encrypting password (default)
-# Overrides the MD5_CRYPT_ENAB option
-#
-# Note: It is recommended to use a value consistent with
-# the PAM modules configuration.
-#
-ENCRYPT_METHOD SHA512
-
-#
-# Only used if ENCRYPT_METHOD is set to SHA256 or SHA512.
-#
-# Define the number of SHA rounds.
-# With a lot of rounds, it is more difficult to brute forcing the password.
-# But note also that it more CPU resources will be needed to authenticate
-# users.
-#
-# If not specified, the libc will choose the default number of rounds (5000).
-# The values must be inside the 1000-999999999 range.
-# If only one of the MIN or MAX values is set, then this value will be used.
-# If MIN > MAX, the highest value will be used.
-#
-# SHA_CRYPT_MIN_ROUNDS 5000
-# SHA_CRYPT_MAX_ROUNDS 5000
-
-################# OBSOLETED BY PAM ##############
-#						#
-# These options are now handled by PAM. Please	#
-# edit the appropriate file in /etc/pam.d/ to	#
-# enable the equivelants of them.
-#
-###############
-
-#MOTD_FILE
-#DIALUPS_CHECK_ENAB
-#LASTLOG_ENAB
-#MAIL_CHECK_ENAB
-#OBSCURE_CHECKS_ENAB
-#PORTTIME_CHECKS_ENAB
-#SU_WHEEL_ONLY
-#CRACKLIB_DICTPATH
-#PASS_CHANGE_TRIES
-#PASS_ALWAYS_WARN
-#ENVIRON_FILE
-#NOLOGINS_FILE
-#ISSUE_FILE
-#PASS_MIN_LEN
-#PASS_MAX_LEN
-#ULIMIT
-#ENV_HZ
-#CHFN_AUTH
-#CHSH_AUTH
-#FAIL_DELAY
-
-################# OBSOLETED #######################
-#						  #
-# These options are no more handled by shadow.    #
-#                                                 #
-# Shadow utilities will display a warning if they #
-# still appear.                                   #
-#                                                 #
-###################################################
-
-# CLOSE_SESSIONS
-# LOGIN_STRING
-# NO_PASSWORD_CONSOLE
-# QMAIL_DIR
-
-
-
+# This file is managed by Salt, do not edit
+CHFN_RESTRICT        rwh
+DEFAULT_HOME         yes
+ENCRYPT_METHOD       SHA512
+ENV_PATH             PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
+ENV_SUPATH           PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ERASECHAR            0177
+GID_MAX              60000
+GID_MIN              1000
+HUSHLOGIN_FILE       .hushlogin
+KILLCHAR             025
+LOG_OK_LOGINS        no
+LOG_UNKFAIL_ENAB     no
+LOGIN_RETRIES        5
+LOGIN_TIMEOUT        60
+MAIL_DIR             /var/mail
+PASS_MAX_DAYS        90
+PASS_MIN_DAYS        7
+PASS_WARN_AGE        7
+SU_NAME              su
+SYSLOG_SG_ENAB       yes
+SYSLOG_SU_ENAB       yes
+TTYGROUP             tty
+TTYPERM              0600
+UID_MAX              60000
+UID_MIN              1000
+UMASK                022
+USERGROUPS_ENAB      yes

2018-11-05 16:20:14,178 [salt.state       :1951][INFO    ][3213] Completed state [/etc/login.defs] at time 16:20:14.178250 duration_in_ms=941.762
2018-11-05 16:20:14,199 [salt.state       :1780][INFO    ][3213] Running state [at] at time 16:20:14.199744
2018-11-05 16:20:14,200 [salt.state       :1813][INFO    ][3213] Executing state pkg.installed for [at]
2018-11-05 16:20:14,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:20:14,703 [salt.state       :300 ][INFO    ][3213] All specified packages are already installed
2018-11-05 16:20:14,704 [salt.state       :1951][INFO    ][3213] Completed state [at] at time 16:20:14.704378 duration_in_ms=504.635
2018-11-05 16:20:14,707 [salt.state       :1780][INFO    ][3213] Running state [atd] at time 16:20:14.707931
2018-11-05 16:20:14,708 [salt.state       :1813][INFO    ][3213] Executing state service.running for [atd]
2018-11-05 16:20:14,710 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'atd.service', '-n', '0'] in directory '/root'
2018-11-05 16:20:14,758 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'atd.service'] in directory '/root'
2018-11-05 16:20:14,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'atd.service'] in directory '/root'
2018-11-05 16:20:14,807 [salt.state       :300 ][INFO    ][3213] The service atd is already running
2018-11-05 16:20:14,808 [salt.state       :1951][INFO    ][3213] Completed state [atd] at time 16:20:14.808359 duration_in_ms=100.426
2018-11-05 16:20:14,815 [salt.state       :1780][INFO    ][3213] Running state [cron] at time 16:20:14.815595
2018-11-05 16:20:14,816 [salt.state       :1813][INFO    ][3213] Executing state pkg.installed for [cron]
2018-11-05 16:20:14,831 [salt.state       :300 ][INFO    ][3213] All specified packages are already installed
2018-11-05 16:20:14,832 [salt.state       :1951][INFO    ][3213] Completed state [cron] at time 16:20:14.832162 duration_in_ms=16.566
2018-11-05 16:20:14,835 [salt.state       :1780][INFO    ][3213] Running state [/etc/at.allow] at time 16:20:14.835399
2018-11-05 16:20:14,835 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/at.allow]
2018-11-05 16:20:14,860 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/cron_users.jinja'
2018-11-05 16:20:14,880 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:14,881 [salt.state       :1951][INFO    ][3213] Completed state [/etc/at.allow] at time 16:20:14.881233 duration_in_ms=45.834
2018-11-05 16:20:14,881 [salt.state       :1780][INFO    ][3213] Running state [/etc/at.deny] at time 16:20:14.881654
2018-11-05 16:20:14,882 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/at.deny]
2018-11-05 16:20:14,882 [salt.state       :300 ][INFO    ][3213] {'removed': '/etc/at.deny'}
2018-11-05 16:20:14,884 [salt.state       :1951][INFO    ][3213] Completed state [/etc/at.deny] at time 16:20:14.884234 duration_in_ms=2.58
2018-11-05 16:20:14,886 [salt.state       :1780][INFO    ][3213] Running state [cron] at time 16:20:14.886841
2018-11-05 16:20:14,887 [salt.state       :1813][INFO    ][3213] Executing state service.running for [cron]
2018-11-05 16:20:14,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'cron.service', '-n', '0'] in directory '/root'
2018-11-05 16:20:14,915 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'cron.service'] in directory '/root'
2018-11-05 16:20:14,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'cron.service'] in directory '/root'
2018-11-05 16:20:14,961 [salt.state       :300 ][INFO    ][3213] The service cron is already running
2018-11-05 16:20:14,962 [salt.state       :1951][INFO    ][3213] Completed state [cron] at time 16:20:14.962146 duration_in_ms=75.303
2018-11-05 16:20:14,964 [salt.state       :1780][INFO    ][3213] Running state [/etc/cron.allow] at time 16:20:14.964370
2018-11-05 16:20:14,965 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/cron.allow]
2018-11-05 16:20:14,999 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:15,000 [salt.state       :1951][INFO    ][3213] Completed state [/etc/cron.allow] at time 16:20:15.000350 duration_in_ms=35.98
2018-11-05 16:20:15,000 [salt.state       :1780][INFO    ][3213] Running state [/etc/cron.deny] at time 16:20:15.000673
2018-11-05 16:20:15,000 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/cron.deny]
2018-11-05 16:20:15,002 [salt.state       :300 ][INFO    ][3213] File /etc/cron.deny is not present
2018-11-05 16:20:15,002 [salt.state       :1951][INFO    ][3213] Completed state [/etc/cron.deny] at time 16:20:15.002317 duration_in_ms=1.644
2018-11-05 16:20:15,003 [salt.state       :1780][INFO    ][3213] Running state [/etc/crontab] at time 16:20:15.003411
2018-11-05 16:20:15,003 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/crontab]
2018-11-05 16:20:15,006 [salt.state       :300 ][INFO    ][3213] {'mode': '0600'}
2018-11-05 16:20:15,006 [salt.state       :1951][INFO    ][3213] Completed state [/etc/crontab] at time 16:20:15.006307 duration_in_ms=2.896
2018-11-05 16:20:15,008 [salt.state       :1780][INFO    ][3213] Running state [/etc/cron.d] at time 16:20:15.007970
2018-11-05 16:20:15,008 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/cron.d]
2018-11-05 16:20:15,010 [salt.state       :300 ][INFO    ][3213] {'mode': '0600'}
2018-11-05 16:20:15,010 [salt.state       :1951][INFO    ][3213] Completed state [/etc/cron.d] at time 16:20:15.010322 duration_in_ms=2.352
2018-11-05 16:20:15,012 [salt.state       :1780][INFO    ][3213] Running state [/etc/cron.daily] at time 16:20:15.012266
2018-11-05 16:20:15,012 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/cron.daily]
2018-11-05 16:20:15,015 [salt.state       :300 ][INFO    ][3213] {'mode': '0600'}
2018-11-05 16:20:15,015 [salt.state       :1951][INFO    ][3213] Completed state [/etc/cron.daily] at time 16:20:15.015652 duration_in_ms=3.386
2018-11-05 16:20:15,018 [salt.state       :1780][INFO    ][3213] Running state [/etc/cron.hourly] at time 16:20:15.018048
2018-11-05 16:20:15,018 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/cron.hourly]
2018-11-05 16:20:15,020 [salt.state       :300 ][INFO    ][3213] {'mode': '0600'}
2018-11-05 16:20:15,020 [salt.state       :1951][INFO    ][3213] Completed state [/etc/cron.hourly] at time 16:20:15.020812 duration_in_ms=2.764
2018-11-05 16:20:15,022 [salt.state       :1780][INFO    ][3213] Running state [/etc/cron.monthly] at time 16:20:15.021916
2018-11-05 16:20:15,022 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/cron.monthly]
2018-11-05 16:20:15,025 [salt.state       :300 ][INFO    ][3213] {'mode': '0600'}
2018-11-05 16:20:15,026 [salt.state       :1951][INFO    ][3213] Completed state [/etc/cron.monthly] at time 16:20:15.026311 duration_in_ms=4.394
2018-11-05 16:20:15,027 [salt.state       :1780][INFO    ][3213] Running state [/etc/cron.weekly] at time 16:20:15.027369
2018-11-05 16:20:15,027 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/cron.weekly]
2018-11-05 16:20:15,032 [salt.state       :300 ][INFO    ][3213] {'mode': '0600'}
2018-11-05 16:20:15,032 [salt.state       :1951][INFO    ][3213] Completed state [/etc/cron.weekly] at time 16:20:15.032527 duration_in_ms=5.158
2018-11-05 16:20:15,038 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 16:20:15.038148
2018-11-05 16:20:15,038 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-11-05 16:20:15,062 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-11-05 16:20:15,083 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:15,084 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 16:20:15.084013 duration_in_ms=45.865
2018-11-05 16:20:15,084 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 16:20:15.084390
2018-11-05 16:20:15,084 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-11-05 16:20:15,111 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:15,111 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 16:20:15.111903 duration_in_ms=27.513
2018-11-05 16:20:15,114 [salt.state       :1780][INFO    ][3213] Running state [linux_repo_prereq_pkgs] at time 16:20:15.114707
2018-11-05 16:20:15,115 [salt.state       :1813][INFO    ][3213] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-11-05 16:20:15,128 [salt.state       :300 ][INFO    ][3213] All specified packages are already installed
2018-11-05 16:20:15,129 [salt.state       :1951][INFO    ][3213] Completed state [linux_repo_prereq_pkgs] at time 16:20:15.129276 duration_in_ms=14.569
2018-11-05 16:20:15,130 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 16:20:15.130785
2018-11-05 16:20:15,131 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-11-05 16:20:15,131 [salt.state       :300 ][INFO    ][3213] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-11-05 16:20:15,131 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 16:20:15.131767 duration_in_ms=0.982
2018-11-05 16:20:15,132 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 16:20:15.132080
2018-11-05 16:20:15,132 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-11-05 16:20:15,133 [salt.state       :300 ][INFO    ][3213] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-11-05 16:20:15,133 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 16:20:15.133656 duration_in_ms=1.576
2018-11-05 16:20:15,134 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 16:20:15.133972
2018-11-05 16:20:15,134 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-11-05 16:20:15,156 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-11-05 16:20:15,311 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:15,312 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 16:20:15.312164 duration_in_ms=178.19
2018-11-05 16:20:15,317 [salt.state       :1780][INFO    ][3213] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 16:20:15.317698
2018-11-05 16:20:15,318 [salt.state       :1813][INFO    ][3213] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-11-05 16:20:15,635 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-11-05 16:20:16,077 [salt.state       :300 ][INFO    ][3213] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-11-05 16:20:16,078 [salt.state       :1951][INFO    ][3213] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 16:20:16.078325 duration_in_ms=760.626
2018-11-05 16:20:16,079 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 16:20:16.079354
2018-11-05 16:20:16,079 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-11-05 16:20:16,080 [salt.state       :300 ][INFO    ][3213] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-11-05 16:20:16,081 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 16:20:16.080969 duration_in_ms=1.616
2018-11-05 16:20:16,081 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/preferences.d/uca] at time 16:20:16.081286
2018-11-05 16:20:16,082 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-11-05 16:20:16,230 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:16,230 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/preferences.d/uca] at time 16:20:16.230553 duration_in_ms=149.267
2018-11-05 16:20:16,230 [salt.state       :1780][INFO    ][3213] Running state [echo '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' | base64 -d | apt-key add -] at time 16:20:16.230928
2018-11-05 16:20:16,231 [salt.state       :1813][INFO    ][3213] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-11-05 16:20:16,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-11-05 16:20:16,483 [salt.state       :300 ][INFO    ][3213] {'pid': 3459, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-11-05 16:20:16,483 [salt.state       :1951][INFO    ][3213] Completed state [echo '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' | base64 -d | apt-key add -] at time 16:20:16.483706 duration_in_ms=252.778
2018-11-05 16:20:16,490 [salt.state       :1780][INFO    ][3213] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 16:20:16.490810
2018-11-05 16:20:16,491 [salt.state       :1813][INFO    ][3213] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-11-05 16:20:16,737 [salt.state       :300 ][INFO    ][3213] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-11-05 16:20:16,739 [salt.state       :1951][INFO    ][3213] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 16:20:16.738654 duration_in_ms=247.843
2018-11-05 16:20:16,740 [salt.state       :1780][INFO    ][3213] Running state [pkg.refresh_db] at time 16:20:16.740282
2018-11-05 16:20:16,742 [salt.state       :1813][INFO    ][3213] Executing state module.run for [pkg.refresh_db]
2018-11-05 16:20:16,743 [salt.utils.decorators:613 ][WARNING ][3213] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-05 16:20:16,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 16:20:20,567 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162020553187
2018-11-05 16:20:20,601 [salt.minion      :1432][INFO    ][3937] Starting a new job with PID 3937
2018-11-05 16:20:20,703 [salt.minion      :1711][INFO    ][3937] Returning information for job: 20181105162020553187
2018-11-05 16:20:21,702 [salt.state       :300 ][INFO    ][3213] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-11-05 16:20:21,705 [salt.state       :1951][INFO    ][3213] Completed state [pkg.refresh_db] at time 16:20:21.705266 duration_in_ms=4964.983
2018-11-05 16:20:21,706 [salt.state       :1780][INFO    ][3213] Running state [linux_extra_packages_removed] at time 16:20:21.706062
2018-11-05 16:20:21,706 [salt.state       :1813][INFO    ][3213] Executing state pkg.removed for [linux_extra_packages_removed]
2018-11-05 16:20:21,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', 'remove', 'telnet'] in directory '/root'
2018-11-05 16:20:24,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:20:24,294 [salt.state       :300 ][INFO    ][3213] Made the following changes:
'telnet-client' changed from '1' to 'absent'
'telnet' changed from '0.17-40' to 'absent'

2018-11-05 16:20:24,324 [salt.state       :915 ][INFO    ][3213] Loading fresh modules for state activity
2018-11-05 16:20:24,374 [salt.state       :1951][INFO    ][3213] Completed state [linux_extra_packages_removed] at time 16:20:24.374401 duration_in_ms=2668.338
2018-11-05 16:20:24,382 [salt.state       :1780][INFO    ][3213] Running state [linux_extra_packages_latest] at time 16:20:24.382280
2018-11-05 16:20:24,382 [salt.state       :1813][INFO    ][3213] Executing state pkg.latest for [linux_extra_packages_latest]
2018-11-05 16:20:25,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-11-05 16:20:25,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:20:25,521 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-11-05 16:20:29,271 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:20:29,335 [salt.state       :300 ][INFO    ][3213] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-11-05 16:20:29,371 [salt.state       :915 ][INFO    ][3213] Loading fresh modules for state activity
2018-11-05 16:20:29,424 [salt.state       :1951][INFO    ][3213] Completed state [linux_extra_packages_latest] at time 16:20:29.424365 duration_in_ms=5042.084
2018-11-05 16:20:29,430 [salt.state       :1780][INFO    ][3213] Running state [UTC] at time 16:20:29.430067
2018-11-05 16:20:29,431 [salt.state       :1813][INFO    ][3213] Executing state timezone.system for [UTC]
2018-11-05 16:20:29,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['timedatectl'] in directory '/root'
2018-11-05 16:20:29,666 [salt.state       :300 ][INFO    ][3213] Timezone UTC already set, UTC already set to UTC
2018-11-05 16:20:29,668 [salt.state       :1951][INFO    ][3213] Completed state [UTC] at time 16:20:29.668119 duration_in_ms=238.052
2018-11-05 16:20:29,672 [salt.state       :1780][INFO    ][3213] Running state [/etc/default/grub.d] at time 16:20:29.672751
2018-11-05 16:20:29,673 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/default/grub.d]
2018-11-05 16:20:29,680 [salt.state       :300 ][INFO    ][3213] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-11-05 16:20:29,680 [salt.state       :1951][INFO    ][3213] Completed state [/etc/default/grub.d] at time 16:20:29.680652 duration_in_ms=7.901
2018-11-05 16:20:29,682 [salt.state       :1780][INFO    ][3213] Running state [update-grub] at time 16:20:29.682076
2018-11-05 16:20:29,682 [salt.state       :1813][INFO    ][3213] Executing state cmd.wait for [update-grub]
2018-11-05 16:20:29,683 [salt.state       :300 ][INFO    ][3213] No changes made for update-grub
2018-11-05 16:20:29,684 [salt.state       :1951][INFO    ][3213] Completed state [update-grub] at time 16:20:29.684046 duration_in_ms=1.97
2018-11-05 16:20:29,686 [salt.state       :1780][INFO    ][3213] Running state [/boot/grub/grub.cfg] at time 16:20:29.686843
2018-11-05 16:20:29,687 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/boot/grub/grub.cfg]
2018-11-05 16:20:30,672 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162030657558
2018-11-05 16:20:30,706 [salt.minion      :1432][INFO    ][4399] Starting a new job with PID 4399
2018-11-05 16:20:30,732 [salt.minion      :1711][INFO    ][4399] Returning information for job: 20181105162030657558
2018-11-05 16:20:31,056 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'test -f /boot/grub/grub.cfg' in directory '/root'
2018-11-05 16:20:31,077 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /boot/grub/grub.cfg - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:31,078 [salt.state       :300 ][INFO    ][3213] {'mode': '0400'}
2018-11-05 16:20:31,079 [salt.state       :1951][INFO    ][3213] Completed state [/boot/grub/grub.cfg] at time 16:20:31.079392 duration_in_ms=1392.547
2018-11-05 16:20:31,080 [salt.state       :1780][INFO    ][3213] Running state [nf_conntrack] at time 16:20:31.080947
2018-11-05 16:20:31,082 [salt.state       :1813][INFO    ][3213] Executing state kmod.present for [nf_conntrack]
2018-11-05 16:20:31,083 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'lsmod' in directory '/root'
2018-11-05 16:20:31,488 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'lsmod' in directory '/root'
2018-11-05 16:20:31,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-11-05 16:20:31,538 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'lsmod' in directory '/root'
2018-11-05 16:20:31,663 [salt.state       :300 ][INFO    ][3213] {'nf_conntrack': 'loaded'}
2018-11-05 16:20:31,664 [salt.state       :1951][INFO    ][3213] Completed state [nf_conntrack] at time 16:20:31.663917 duration_in_ms=582.969
2018-11-05 16:20:31,664 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d] at time 16:20:31.664918
2018-11-05 16:20:31,665 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/modprobe.d]
2018-11-05 16:20:31,666 [salt.state       :300 ][INFO    ][3213] Directory /etc/modprobe.d is in the correct state
Directory /etc/modprobe.d updated
2018-11-05 16:20:31,667 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d] at time 16:20:31.667181 duration_in_ms=2.263
2018-11-05 16:20:31,669 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/hfsplus.conf] at time 16:20:31.669583
2018-11-05 16:20:31,669 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/hfsplus.conf]
2018-11-05 16:20:31,691 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/modprobe.conf.jinja'
2018-11-05 16:20:31,872 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:31,873 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/hfsplus.conf] at time 16:20:31.872998 duration_in_ms=203.414
2018-11-05 16:20:31,875 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/rds.conf] at time 16:20:31.875696
2018-11-05 16:20:31,876 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/rds.conf]
2018-11-05 16:20:32,050 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:32,051 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/rds.conf] at time 16:20:32.051020 duration_in_ms=175.325
2018-11-05 16:20:32,052 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/cramfs.conf] at time 16:20:32.052802
2018-11-05 16:20:32,053 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/cramfs.conf]
2018-11-05 16:20:32,223 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:32,223 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/cramfs.conf] at time 16:20:32.223574 duration_in_ms=170.771
2018-11-05 16:20:32,225 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/freevxfs.conf] at time 16:20:32.225065
2018-11-05 16:20:32,225 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/freevxfs.conf]
2018-11-05 16:20:32,393 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:32,393 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/freevxfs.conf] at time 16:20:32.393806 duration_in_ms=168.74
2018-11-05 16:20:32,395 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/hfs.conf] at time 16:20:32.395898
2018-11-05 16:20:32,396 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/hfs.conf]
2018-11-05 16:20:32,560 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:32,560 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/hfs.conf] at time 16:20:32.560755 duration_in_ms=164.857
2018-11-05 16:20:32,562 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/squashfs.conf] at time 16:20:32.562314
2018-11-05 16:20:32,562 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/squashfs.conf]
2018-11-05 16:20:32,852 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:32,853 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/squashfs.conf] at time 16:20:32.852957 duration_in_ms=290.643
2018-11-05 16:20:32,855 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/udf.conf] at time 16:20:32.855155
2018-11-05 16:20:32,855 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/udf.conf]
2018-11-05 16:20:33,031 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:33,031 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/udf.conf] at time 16:20:33.031483 duration_in_ms=176.327
2018-11-05 16:20:33,034 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/vfat.conf] at time 16:20:33.034471
2018-11-05 16:20:33,034 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/vfat.conf]
2018-11-05 16:20:33,865 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:33,865 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/vfat.conf] at time 16:20:33.865415 duration_in_ms=830.943
2018-11-05 16:20:33,867 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/sctp.conf] at time 16:20:33.867345
2018-11-05 16:20:33,867 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/sctp.conf]
2018-11-05 16:20:34,056 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:34,057 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/sctp.conf] at time 16:20:34.057148 duration_in_ms=189.802
2018-11-05 16:20:34,059 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/jffs2.conf] at time 16:20:34.059301
2018-11-05 16:20:34,059 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/jffs2.conf]
2018-11-05 16:20:34,244 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:34,245 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/jffs2.conf] at time 16:20:34.245020 duration_in_ms=185.718
2018-11-05 16:20:34,247 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/tipc.conf] at time 16:20:34.247735
2018-11-05 16:20:34,248 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/tipc.conf]
2018-11-05 16:20:34,435 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:34,435 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/tipc.conf] at time 16:20:34.435508 duration_in_ms=187.773
2018-11-05 16:20:34,437 [salt.state       :1780][INFO    ][3213] Running state [/etc/modprobe.d/dccp.conf] at time 16:20:34.437295
2018-11-05 16:20:34,438 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/modprobe.d/dccp.conf]
2018-11-05 16:20:34,625 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:34,625 [salt.state       :1951][INFO    ][3213] Completed state [/etc/modprobe.d/dccp.conf] at time 16:20:34.625791 duration_in_ms=188.496
2018-11-05 16:20:34,626 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_congestion_control] at time 16:20:34.626087
2018-11-05 16:20:34,626 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-11-05 16:20:34,627 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-11-05 16:20:34,678 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-11-05 16:20:34,679 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_congestion_control] at time 16:20:34.679065 duration_in_ms=52.977
2018-11-05 16:20:34,679 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_slow_start_after_idle] at time 16:20:34.679548
2018-11-05 16:20:34,680 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-11-05 16:20:34,683 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-11-05 16:20:34,707 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-11-05 16:20:34,708 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 16:20:34.708665 duration_in_ms=29.115
2018-11-05 16:20:34,710 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.icmp_echo_ignore_broadcasts] at time 16:20:34.710661
2018-11-05 16:20:34,711 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.icmp_echo_ignore_broadcasts]
2018-11-05 16:20:34,714 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.icmp_echo_ignore_broadcasts="1"' in directory '/root'
2018-11-05 16:20:34,737 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.icmp_echo_ignore_broadcasts': 1}
2018-11-05 16:20:34,740 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.icmp_echo_ignore_broadcasts] at time 16:20:34.740007 duration_in_ms=29.346
2018-11-05 16:20:34,740 [salt.state       :1780][INFO    ][3213] Running state [net.nf_conntrack_max] at time 16:20:34.740723
2018-11-05 16:20:34,741 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.nf_conntrack_max]
2018-11-05 16:20:34,743 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-11-05 16:20:34,762 [salt.state       :300 ][INFO    ][3213] {'net.nf_conntrack_max': 1048576}
2018-11-05 16:20:34,764 [salt.state       :1951][INFO    ][3213] Completed state [net.nf_conntrack_max] at time 16:20:34.763885 duration_in_ms=23.161
2018-11-05 16:20:34,765 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.icmp_ignore_bogus_error_responses] at time 16:20:34.765719
2018-11-05 16:20:34,766 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.icmp_ignore_bogus_error_responses]
2018-11-05 16:20:34,768 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.icmp_ignore_bogus_error_responses="1"' in directory '/root'
2018-11-05 16:20:34,791 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.icmp_ignore_bogus_error_responses': 1}
2018-11-05 16:20:34,792 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.icmp_ignore_bogus_error_responses] at time 16:20:34.792631 duration_in_ms=26.911
2018-11-05 16:20:34,793 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.default.log_martians] at time 16:20:34.793587
2018-11-05 16:20:34,794 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.default.log_martians]
2018-11-05 16:20:34,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.default.log_martians="1"' in directory '/root'
2018-11-05 16:20:34,816 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.default.log_martians': 1}
2018-11-05 16:20:34,819 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.default.log_martians] at time 16:20:34.818929 duration_in_ms=25.342
2018-11-05 16:20:34,819 [salt.state       :1780][INFO    ][3213] Running state [net.core.somaxconn] at time 16:20:34.819648
2018-11-05 16:20:34,820 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.core.somaxconn]
2018-11-05 16:20:34,822 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-11-05 16:20:34,843 [salt.state       :300 ][INFO    ][3213] {'net.core.somaxconn': 4096}
2018-11-05 16:20:34,845 [salt.state       :1951][INFO    ][3213] Completed state [net.core.somaxconn] at time 16:20:34.845001 duration_in_ms=25.353
2018-11-05 16:20:34,846 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.all.send_redirects] at time 16:20:34.846514
2018-11-05 16:20:34,847 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.all.send_redirects]
2018-11-05 16:20:34,852 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.all.send_redirects="0"' in directory '/root'
2018-11-05 16:20:34,872 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.all.send_redirects': 0}
2018-11-05 16:20:34,874 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.all.send_redirects] at time 16:20:34.874842 duration_in_ms=28.328
2018-11-05 16:20:34,875 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_tw_reuse] at time 16:20:34.875589
2018-11-05 16:20:34,876 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-11-05 16:20:34,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-11-05 16:20:34,897 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_tw_reuse': 1}
2018-11-05 16:20:34,899 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_tw_reuse] at time 16:20:34.899317 duration_in_ms=23.728
2018-11-05 16:20:34,900 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.default.rp_filter] at time 16:20:34.900019
2018-11-05 16:20:34,900 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.default.rp_filter]
2018-11-05 16:20:34,903 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.default.rp_filter="1"' in directory '/root'
2018-11-05 16:20:34,922 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.default.rp_filter': 1}
2018-11-05 16:20:34,923 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.default.rp_filter] at time 16:20:34.923179 duration_in_ms=23.159
2018-11-05 16:20:34,923 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_fin_timeout] at time 16:20:34.923889
2018-11-05 16:20:34,924 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-11-05 16:20:34,926 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-11-05 16:20:34,946 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_fin_timeout': 30}
2018-11-05 16:20:34,947 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_fin_timeout] at time 16:20:34.947132 duration_in_ms=23.242
2018-11-05 16:20:34,948 [salt.state       :1780][INFO    ][3213] Running state [kernel.panic] at time 16:20:34.948125
2018-11-05 16:20:34,948 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [kernel.panic]
2018-11-05 16:20:34,951 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-11-05 16:20:34,974 [salt.state       :300 ][INFO    ][3213] {'kernel.panic': 60}
2018-11-05 16:20:34,975 [salt.state       :1951][INFO    ][3213] Completed state [kernel.panic] at time 16:20:34.975571 duration_in_ms=27.445
2018-11-05 16:20:34,976 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_keepalive_probes] at time 16:20:34.976270
2018-11-05 16:20:34,976 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-11-05 16:20:34,979 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-11-05 16:20:35,000 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_keepalive_probes': 8}
2018-11-05 16:20:35,002 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_keepalive_probes] at time 16:20:35.001906 duration_in_ms=25.635
2018-11-05 16:20:35,003 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.all.log_martians] at time 16:20:35.003243
2018-11-05 16:20:35,004 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.all.log_martians]
2018-11-05 16:20:35,007 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.all.log_martians="1"' in directory '/root'
2018-11-05 16:20:35,030 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.all.log_martians': 1}
2018-11-05 16:20:35,031 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.all.log_martians] at time 16:20:35.031582 duration_in_ms=28.337
2018-11-05 16:20:35,033 [salt.state       :1780][INFO    ][3213] Running state [fs.suid_dumpable] at time 16:20:35.033741
2018-11-05 16:20:35,034 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [fs.suid_dumpable]
2018-11-05 16:20:35,036 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w fs.suid_dumpable="0"' in directory '/root'
2018-11-05 16:20:35,056 [salt.state       :300 ][INFO    ][3213] {'fs.suid_dumpable': 0}
2018-11-05 16:20:35,057 [salt.state       :1951][INFO    ][3213] Completed state [fs.suid_dumpable] at time 16:20:35.057171 duration_in_ms=23.429
2018-11-05 16:20:35,058 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.default.accept_redirects] at time 16:20:35.058624
2018-11-05 16:20:35,059 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.default.accept_redirects]
2018-11-05 16:20:35,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.default.accept_redirects="0"' in directory '/root'
2018-11-05 16:20:35,085 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.default.accept_redirects': 0}
2018-11-05 16:20:35,087 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.default.accept_redirects] at time 16:20:35.086881 duration_in_ms=28.257
2018-11-05 16:20:35,088 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.default.secure_redirects] at time 16:20:35.088118
2018-11-05 16:20:35,090 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.default.secure_redirects]
2018-11-05 16:20:35,092 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.default.secure_redirects="0"' in directory '/root'
2018-11-05 16:20:35,112 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.default.secure_redirects': 0}
2018-11-05 16:20:35,113 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.default.secure_redirects] at time 16:20:35.113558 duration_in_ms=25.441
2018-11-05 16:20:35,115 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.default.accept_source_route] at time 16:20:35.115123
2018-11-05 16:20:35,117 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.default.accept_source_route]
2018-11-05 16:20:35,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.default.accept_source_route="0"' in directory '/root'
2018-11-05 16:20:35,142 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.default.accept_source_route': 0}
2018-11-05 16:20:35,143 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.default.accept_source_route] at time 16:20:35.143802 duration_in_ms=28.678
2018-11-05 16:20:35,144 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_keepalive_intvl] at time 16:20:35.144801
2018-11-05 16:20:35,146 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-11-05 16:20:35,149 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-11-05 16:20:35,169 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-11-05 16:20:35,170 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_keepalive_intvl] at time 16:20:35.170270 duration_in_ms=25.468
2018-11-05 16:20:35,171 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_keepalive_time] at time 16:20:35.171313
2018-11-05 16:20:35,172 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-11-05 16:20:35,175 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-11-05 16:20:35,195 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_keepalive_time': 30}
2018-11-05 16:20:35,197 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_keepalive_time] at time 16:20:35.197204 duration_in_ms=25.891
2018-11-05 16:20:35,198 [salt.state       :1780][INFO    ][3213] Running state [kernel.randomize_va_space] at time 16:20:35.198590
2018-11-05 16:20:35,199 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [kernel.randomize_va_space]
2018-11-05 16:20:35,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w kernel.randomize_va_space="2"' in directory '/root'
2018-11-05 16:20:35,226 [salt.state       :300 ][INFO    ][3213] {'kernel.randomize_va_space': 2}
2018-11-05 16:20:35,227 [salt.state       :1951][INFO    ][3213] Completed state [kernel.randomize_va_space] at time 16:20:35.227048 duration_in_ms=28.457
2018-11-05 16:20:35,228 [salt.state       :1780][INFO    ][3213] Running state [fs.file-max] at time 16:20:35.228524
2018-11-05 16:20:35,229 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [fs.file-max]
2018-11-05 16:20:35,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-11-05 16:20:35,251 [salt.state       :300 ][INFO    ][3213] {'fs.file-max': 124165}
2018-11-05 16:20:35,252 [salt.state       :1951][INFO    ][3213] Completed state [fs.file-max] at time 16:20:35.252553 duration_in_ms=24.029
2018-11-05 16:20:35,253 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_syncookies] at time 16:20:35.253882
2018-11-05 16:20:35,254 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_syncookies]
2018-11-05 16:20:35,256 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_syncookies="1"' in directory '/root'
2018-11-05 16:20:35,279 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_syncookies': 1}
2018-11-05 16:20:35,282 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_syncookies] at time 16:20:35.282270 duration_in_ms=28.388
2018-11-05 16:20:35,283 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_max_syn_backlog] at time 16:20:35.283114
2018-11-05 16:20:35,283 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-11-05 16:20:35,286 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-11-05 16:20:35,305 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-11-05 16:20:35,306 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_max_syn_backlog] at time 16:20:35.306576 duration_in_ms=23.461
2018-11-05 16:20:35,307 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.all.rp_filter] at time 16:20:35.307450
2018-11-05 16:20:35,308 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.all.rp_filter]
2018-11-05 16:20:35,310 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.all.rp_filter="1"' in directory '/root'
2018-11-05 16:20:35,327 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.all.rp_filter': 1}
2018-11-05 16:20:35,329 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.all.rp_filter] at time 16:20:35.329005 duration_in_ms=21.554
2018-11-05 16:20:35,329 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.all.accept_source_route] at time 16:20:35.329726
2018-11-05 16:20:35,330 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.all.accept_source_route]
2018-11-05 16:20:35,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.all.accept_source_route="0"' in directory '/root'
2018-11-05 16:20:35,348 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.all.accept_source_route': 0}
2018-11-05 16:20:35,349 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.all.accept_source_route] at time 16:20:35.349417 duration_in_ms=19.691
2018-11-05 16:20:35,350 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.tcp_retries2] at time 16:20:35.350739
2018-11-05 16:20:35,351 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-11-05 16:20:35,352 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-11-05 16:20:35,371 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.tcp_retries2': 5}
2018-11-05 16:20:35,372 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.tcp_retries2] at time 16:20:35.372318 duration_in_ms=21.578
2018-11-05 16:20:35,374 [salt.state       :1780][INFO    ][3213] Running state [net.core.netdev_max_backlog] at time 16:20:35.374624
2018-11-05 16:20:35,375 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-11-05 16:20:35,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-11-05 16:20:35,398 [salt.state       :300 ][INFO    ][3213] {'net.core.netdev_max_backlog': 261144}
2018-11-05 16:20:35,399 [salt.state       :1951][INFO    ][3213] Completed state [net.core.netdev_max_backlog] at time 16:20:35.399799 duration_in_ms=25.174
2018-11-05 16:20:35,401 [salt.state       :1780][INFO    ][3213] Running state [vm.swappiness] at time 16:20:35.401816
2018-11-05 16:20:35,402 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [vm.swappiness]
2018-11-05 16:20:35,404 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-11-05 16:20:35,423 [salt.state       :300 ][INFO    ][3213] {'vm.swappiness': 10}
2018-11-05 16:20:35,424 [salt.state       :1951][INFO    ][3213] Completed state [vm.swappiness] at time 16:20:35.424579 duration_in_ms=22.762
2018-11-05 16:20:35,426 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.all.secure_redirects] at time 16:20:35.426198
2018-11-05 16:20:35,426 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.all.secure_redirects]
2018-11-05 16:20:35,429 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.all.secure_redirects="0"' in directory '/root'
2018-11-05 16:20:35,451 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.all.secure_redirects': 0}
2018-11-05 16:20:35,451 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.all.secure_redirects] at time 16:20:35.451717 duration_in_ms=25.518
2018-11-05 16:20:35,452 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.neigh.default.gc_thresh1] at time 16:20:35.452432
2018-11-05 16:20:35,453 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-11-05 16:20:35,456 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-11-05 16:20:35,473 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-11-05 16:20:35,474 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 16:20:35.474562 duration_in_ms=22.129
2018-11-05 16:20:35,475 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.neigh.default.gc_thresh2] at time 16:20:35.475261
2018-11-05 16:20:35,475 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-11-05 16:20:35,478 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-11-05 16:20:35,495 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-11-05 16:20:35,496 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 16:20:35.496621 duration_in_ms=21.359
2018-11-05 16:20:35,497 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.neigh.default.gc_thresh3] at time 16:20:35.497343
2018-11-05 16:20:35,498 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-11-05 16:20:35,499 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-11-05 16:20:35,524 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-11-05 16:20:35,526 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 16:20:35.526711 duration_in_ms=29.367
2018-11-05 16:20:35,527 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.default.send_redirects] at time 16:20:35.527725
2018-11-05 16:20:35,529 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.default.send_redirects]
2018-11-05 16:20:35,530 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.default.send_redirects="0"' in directory '/root'
2018-11-05 16:20:35,554 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.default.send_redirects': 0}
2018-11-05 16:20:35,555 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.default.send_redirects] at time 16:20:35.555154 duration_in_ms=27.428
2018-11-05 16:20:35,555 [salt.state       :1780][INFO    ][3213] Running state [net.ipv4.conf.all.accept_redirects] at time 16:20:35.555907
2018-11-05 16:20:35,556 [salt.state       :1813][INFO    ][3213] Executing state sysctl.present for [net.ipv4.conf.all.accept_redirects]
2018-11-05 16:20:35,558 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'sysctl -w net.ipv4.conf.all.accept_redirects="0"' in directory '/root'
2018-11-05 16:20:35,586 [salt.state       :300 ][INFO    ][3213] {'net.ipv4.conf.all.accept_redirects': 0}
2018-11-05 16:20:35,588 [salt.state       :1951][INFO    ][3213] Completed state [net.ipv4.conf.all.accept_redirects] at time 16:20:35.588820 duration_in_ms=32.912
2018-11-05 16:20:35,590 [salt.state       :1780][INFO    ][3213] Running state [linux_sysfs_package] at time 16:20:35.590707
2018-11-05 16:20:35,591 [salt.state       :1813][INFO    ][3213] Executing state pkg.installed for [linux_sysfs_package]
2018-11-05 16:20:35,629 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-11-05 16:20:35,814 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 16:20:38,259 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:20:38,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-11-05 16:20:40,696 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162040682686
2018-11-05 16:20:40,752 [salt.minion      :1432][INFO    ][5139] Starting a new job with PID 5139
2018-11-05 16:20:40,789 [salt.minion      :1711][INFO    ][5139] Returning information for job: 20181105162040682686
2018-11-05 16:20:43,331 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:20:43,404 [salt.state       :300 ][INFO    ][3213] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-11-05 16:20:43,434 [salt.state       :915 ][INFO    ][3213] Loading fresh modules for state activity
2018-11-05 16:20:43,492 [salt.state       :1951][INFO    ][3213] Completed state [linux_sysfs_package] at time 16:20:43.492682 duration_in_ms=7901.975
2018-11-05 16:20:43,500 [salt.state       :1780][INFO    ][3213] Running state [/etc/sysfs.d] at time 16:20:43.500217
2018-11-05 16:20:43,501 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/etc/sysfs.d]
2018-11-05 16:20:43,508 [salt.state       :300 ][INFO    ][3213] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-11-05 16:20:43,509 [salt.state       :1951][INFO    ][3213] Completed state [/etc/sysfs.d] at time 16:20:43.509240 duration_in_ms=9.023
2018-11-05 16:20:44,210 [salt.state       :1780][INFO    ][3213] Running state [ondemand] at time 16:20:44.210001
2018-11-05 16:20:44,210 [salt.state       :1813][INFO    ][3213] Executing state service.dead for [ondemand]
2018-11-05 16:20:44,212 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-11-05 16:20:44,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-05 16:20:44,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-05 16:20:44,289 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-11-05 16:20:44,371 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-11-05 16:20:44,395 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-05 16:20:44,420 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-05 16:20:44,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-11-05 16:20:44,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-11-05 16:20:44,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'runlevel' in directory '/root'
2018-11-05 16:20:44,729 [salt.state       :300 ][INFO    ][3213] {'ondemand': True}
2018-11-05 16:20:44,730 [salt.state       :1951][INFO    ][3213] Completed state [ondemand] at time 16:20:44.730441 duration_in_ms=520.44
2018-11-05 16:20:44,732 [salt.state       :1780][INFO    ][3213] Running state [en_US.UTF-8] at time 16:20:44.732360
2018-11-05 16:20:44,733 [salt.state       :1813][INFO    ][3213] Executing state locale.present for [en_US.UTF-8]
2018-11-05 16:20:44,735 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'locale -a' in directory '/root'
2018-11-05 16:20:44,755 [salt.state       :300 ][INFO    ][3213] Locale en_US.UTF-8 is already present
2018-11-05 16:20:44,756 [salt.state       :1951][INFO    ][3213] Completed state [en_US.UTF-8] at time 16:20:44.756842 duration_in_ms=24.481
2018-11-05 16:20:44,760 [salt.state       :1780][INFO    ][3213] Running state [en_US.UTF-8] at time 16:20:44.760655
2018-11-05 16:20:44,761 [salt.state       :1813][INFO    ][3213] Executing state locale.system for [en_US.UTF-8]
2018-11-05 16:20:44,763 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'localectl' in directory '/root'
2018-11-05 16:20:44,823 [salt.state       :300 ][INFO    ][3213] System locale en_US.UTF-8 already set
2018-11-05 16:20:44,825 [salt.state       :1951][INFO    ][3213] Completed state [en_US.UTF-8] at time 16:20:44.824968 duration_in_ms=64.313
2018-11-05 16:20:44,827 [salt.state       :1780][INFO    ][3213] Running state [root] at time 16:20:44.827261
2018-11-05 16:20:44,830 [salt.state       :1813][INFO    ][3213] Executing state group.present for [root]
2018-11-05 16:20:44,830 [salt.state       :300 ][INFO    ][3213] Group root is present and up to date
2018-11-05 16:20:44,831 [salt.state       :1951][INFO    ][3213] Completed state [root] at time 16:20:44.831383 duration_in_ms=4.122
2018-11-05 16:20:44,835 [salt.state       :1780][INFO    ][3213] Running state [root] at time 16:20:44.835645
2018-11-05 16:20:44,836 [salt.state       :1813][INFO    ][3213] Executing state user.present for [root]
2018-11-05 16:20:44,843 [salt.state       :300 ][INFO    ][3213] User root is present and up to date
2018-11-05 16:20:44,843 [salt.state       :1951][INFO    ][3213] Completed state [root] at time 16:20:44.843613 duration_in_ms=7.968
2018-11-05 16:20:44,845 [salt.state       :1780][INFO    ][3213] Running state [/root] at time 16:20:44.845424
2018-11-05 16:20:44,846 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/root]
2018-11-05 16:20:44,849 [salt.state       :300 ][INFO    ][3213] Directory /root is in the correct state
Directory /root updated
2018-11-05 16:20:44,849 [salt.state       :1951][INFO    ][3213] Completed state [/root] at time 16:20:44.849663 duration_in_ms=4.238
2018-11-05 16:20:44,850 [salt.state       :1780][INFO    ][3213] Running state [/etc/sudoers.d/90-salt-user-root] at time 16:20:44.850251
2018-11-05 16:20:44,850 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-11-05 16:20:44,851 [salt.state       :300 ][INFO    ][3213] File /etc/sudoers.d/90-salt-user-root is not present
2018-11-05 16:20:44,851 [salt.state       :1951][INFO    ][3213] Completed state [/etc/sudoers.d/90-salt-user-root] at time 16:20:44.851434 duration_in_ms=1.183
2018-11-05 16:20:44,851 [salt.state       :1780][INFO    ][3213] Running state [ubuntu] at time 16:20:44.851685
2018-11-05 16:20:44,851 [salt.state       :1813][INFO    ][3213] Executing state group.present for [ubuntu]
2018-11-05 16:20:44,852 [salt.state       :300 ][INFO    ][3213] Group ubuntu is present and up to date
2018-11-05 16:20:44,852 [salt.state       :1951][INFO    ][3213] Completed state [ubuntu] at time 16:20:44.852489 duration_in_ms=0.803
2018-11-05 16:20:44,854 [salt.state       :1780][INFO    ][3213] Running state [ubuntu] at time 16:20:44.854235
2018-11-05 16:20:44,854 [salt.state       :1813][INFO    ][3213] Executing state user.present for [ubuntu]
2018-11-05 16:20:44,859 [salt.state       :300 ][INFO    ][3213] {'passwd': 'XXX-REDACTED-XXX'}
2018-11-05 16:20:44,860 [salt.state       :1951][INFO    ][3213] Completed state [ubuntu] at time 16:20:44.860562 duration_in_ms=6.327
2018-11-05 16:20:44,862 [salt.state       :1780][INFO    ][3213] Running state [/home/ubuntu] at time 16:20:44.862444
2018-11-05 16:20:44,862 [salt.state       :1813][INFO    ][3213] Executing state file.directory for [/home/ubuntu]
2018-11-05 16:20:44,863 [salt.state       :300 ][INFO    ][3213] {'mode': '0700'}
2018-11-05 16:20:44,864 [salt.state       :1951][INFO    ][3213] Completed state [/home/ubuntu] at time 16:20:44.863998 duration_in_ms=1.554
2018-11-05 16:20:44,865 [salt.state       :1780][INFO    ][3213] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 16:20:44.865349
2018-11-05 16:20:44,865 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-11-05 16:20:44,883 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-11-05 16:20:44,900 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.Tlb1OL' in directory '/root'
2018-11-05 16:20:44,934 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:44,935 [salt.state       :1951][INFO    ][3213] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 16:20:44.934915 duration_in_ms=69.566
2018-11-05 16:20:44,935 [salt.state       :1780][INFO    ][3213] Running state [/etc/security/limits.d/90-salt-cis.conf] at time 16:20:44.935327
2018-11-05 16:20:44,935 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/security/limits.d/90-salt-cis.conf]
2018-11-05 16:20:44,954 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-11-05 16:20:45,106 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:45,107 [salt.state       :1951][INFO    ][3213] Completed state [/etc/security/limits.d/90-salt-cis.conf] at time 16:20:45.107665 duration_in_ms=172.336
2018-11-05 16:20:45,108 [salt.state       :1780][INFO    ][3213] Running state [/etc/security/limits.d/90-salt-default.conf] at time 16:20:45.108214
2018-11-05 16:20:45,108 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-11-05 16:20:45,269 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:45,270 [salt.state       :1951][INFO    ][3213] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 16:20:45.270453 duration_in_ms=162.238
2018-11-05 16:20:45,271 [salt.state       :1780][INFO    ][3213] Running state [apt-daily.timer] at time 16:20:45.270962
2018-11-05 16:20:45,271 [salt.state       :1813][INFO    ][3213] Executing state service.dead for [apt-daily.timer]
2018-11-05 16:20:45,272 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'apt-daily.timer', '-n', '0'] in directory '/root'
2018-11-05 16:20:45,297 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,328 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,360 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,431 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,459 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'systemctl', 'disable', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,631 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'apt-daily.timer'] in directory '/root'
2018-11-05 16:20:45,667 [salt.state       :300 ][INFO    ][3213] {'apt-daily.timer': True}
2018-11-05 16:20:45,668 [salt.state       :1951][INFO    ][3213] Completed state [apt-daily.timer] at time 16:20:45.668484 duration_in_ms=397.522
2018-11-05 16:20:45,669 [salt.state       :1780][INFO    ][3213] Running state [autofs] at time 16:20:45.669410
2018-11-05 16:20:45,670 [salt.state       :1813][INFO    ][3213] Executing state service.disabled for [autofs]
2018-11-05 16:20:45,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'autofs.service', '-n', '0'] in directory '/root'
2018-11-05 16:20:45,697 [salt.state       :300 ][INFO    ][3213] The named service autofs is not available
2018-11-05 16:20:45,698 [salt.state       :1951][INFO    ][3213] Completed state [autofs] at time 16:20:45.698115 duration_in_ms=28.704
2018-11-05 16:20:45,699 [salt.state       :1780][INFO    ][3213] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 16:20:45.698781
2018-11-05 16:20:45,699 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-11-05 16:20:46,338 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-11-05 16:20:46,502 [salt.state       :300 ][INFO    ][3213] File changed:
New file
2018-11-05 16:20:46,503 [salt.state       :1951][INFO    ][3213] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 16:20:46.503226 duration_in_ms=804.444
2018-11-05 16:20:46,508 [salt.state       :1780][INFO    ][3213] Running state [service.systemctl_reload] at time 16:20:46.508844
2018-11-05 16:20:46,509 [salt.state       :1813][INFO    ][3213] Executing state module.wait for [service.systemctl_reload]
2018-11-05 16:20:46,510 [salt.state       :300 ][INFO    ][3213] No changes made for service.systemctl_reload
2018-11-05 16:20:46,511 [salt.state       :1951][INFO    ][3213] Completed state [service.systemctl_reload] at time 16:20:46.510968 duration_in_ms=2.124
2018-11-05 16:20:46,511 [salt.state       :1780][INFO    ][3213] Running state [service.systemctl_reload] at time 16:20:46.511245
2018-11-05 16:20:46,511 [salt.state       :1813][INFO    ][3213] Executing state module.mod_watch for [service.systemctl_reload]
2018-11-05 16:20:46,512 [salt.utils.decorators:613 ][WARNING ][3213] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-11-05 16:20:46,514 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-11-05 16:20:46,650 [salt.state       :300 ][INFO    ][3213] {'ret': True}
2018-11-05 16:20:46,651 [salt.state       :1951][INFO    ][3213] Completed state [service.systemctl_reload] at time 16:20:46.651374 duration_in_ms=140.128
2018-11-05 16:20:46,652 [salt.state       :1780][INFO    ][3213] Running state [/etc/shadow] at time 16:20:46.652334
2018-11-05 16:20:46,653 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/shadow]
2018-11-05 16:20:46,654 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/shadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,655 [salt.state       :300 ][INFO    ][3213] File /etc/shadow exists with proper permissions. No changes made.
2018-11-05 16:20:46,655 [salt.state       :1951][INFO    ][3213] Completed state [/etc/shadow] at time 16:20:46.655459 duration_in_ms=3.125
2018-11-05 16:20:46,655 [salt.state       :1780][INFO    ][3213] Running state [/etc/gshadow] at time 16:20:46.655719
2018-11-05 16:20:46,656 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/gshadow]
2018-11-05 16:20:46,658 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/gshadow - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,659 [salt.state       :300 ][INFO    ][3213] File /etc/gshadow exists with proper permissions. No changes made.
2018-11-05 16:20:46,659 [salt.state       :1951][INFO    ][3213] Completed state [/etc/gshadow] at time 16:20:46.659455 duration_in_ms=3.736
2018-11-05 16:20:46,659 [salt.state       :1780][INFO    ][3213] Running state [/etc/group-] at time 16:20:46.659693
2018-11-05 16:20:46,659 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/group-]
2018-11-05 16:20:46,660 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/group- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,660 [salt.state       :300 ][INFO    ][3213] File /etc/group- exists with proper permissions. No changes made.
2018-11-05 16:20:46,661 [salt.state       :1951][INFO    ][3213] Completed state [/etc/group-] at time 16:20:46.661124 duration_in_ms=1.431
2018-11-05 16:20:46,661 [salt.state       :1780][INFO    ][3213] Running state [/etc/shadow-] at time 16:20:46.661367
2018-11-05 16:20:46,662 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/shadow-]
2018-11-05 16:20:46,662 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/shadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,663 [salt.state       :300 ][INFO    ][3213] File /etc/shadow- exists with proper permissions. No changes made.
2018-11-05 16:20:46,663 [salt.state       :1951][INFO    ][3213] Completed state [/etc/shadow-] at time 16:20:46.663485 duration_in_ms=2.118
2018-11-05 16:20:46,663 [salt.state       :1780][INFO    ][3213] Running state [/etc/passwd-] at time 16:20:46.663716
2018-11-05 16:20:46,663 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/passwd-]
2018-11-05 16:20:46,664 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/passwd- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,665 [salt.state       :300 ][INFO    ][3213] File /etc/passwd- exists with proper permissions. No changes made.
2018-11-05 16:20:46,665 [salt.state       :1951][INFO    ][3213] Completed state [/etc/passwd-] at time 16:20:46.665760 duration_in_ms=2.044
2018-11-05 16:20:46,666 [salt.state       :1780][INFO    ][3213] Running state [/etc/passwd] at time 16:20:46.666014
2018-11-05 16:20:46,666 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/passwd]
2018-11-05 16:20:46,666 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/passwd - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,667 [salt.state       :300 ][INFO    ][3213] File /etc/passwd exists with proper permissions. No changes made.
2018-11-05 16:20:46,668 [salt.state       :1951][INFO    ][3213] Completed state [/etc/passwd] at time 16:20:46.667977 duration_in_ms=1.962
2018-11-05 16:20:46,669 [salt.state       :1780][INFO    ][3213] Running state [/etc/gshadow-] at time 16:20:46.669173
2018-11-05 16:20:46,669 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/gshadow-]
2018-11-05 16:20:46,670 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/gshadow- - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,671 [salt.state       :300 ][INFO    ][3213] File /etc/gshadow- exists with proper permissions. No changes made.
2018-11-05 16:20:46,672 [salt.state       :1951][INFO    ][3213] Completed state [/etc/gshadow-] at time 16:20:46.672522 duration_in_ms=3.35
2018-11-05 16:20:46,672 [salt.state       :1780][INFO    ][3213] Running state [/etc/group] at time 16:20:46.672824
2018-11-05 16:20:46,673 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/group]
2018-11-05 16:20:46,673 [salt.loaded.int.states.file:2298][WARNING ][3213] State for file: /etc/group - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-11-05 16:20:46,674 [salt.state       :300 ][INFO    ][3213] File /etc/group exists with proper permissions. No changes made.
2018-11-05 16:20:46,675 [salt.state       :1951][INFO    ][3213] Completed state [/etc/group] at time 16:20:46.675127 duration_in_ms=2.304
2018-11-05 16:20:46,675 [salt.state       :1780][INFO    ][3213] Running state [/etc/issue] at time 16:20:46.675477
2018-11-05 16:20:46,676 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/issue]
2018-11-05 16:20:46,682 [salt.state       :300 ][INFO    ][3213] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-11-05 16:20:46,682 [salt.state       :1951][INFO    ][3213] Completed state [/etc/issue] at time 16:20:46.682542 duration_in_ms=7.065
2018-11-05 16:20:46,682 [salt.state       :1780][INFO    ][3213] Running state [/etc/hostname] at time 16:20:46.682867
2018-11-05 16:20:46,683 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/hostname]
2018-11-05 16:20:46,706 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-11-05 16:20:46,725 [salt.state       :300 ][INFO    ][3213] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-11-05 16:20:46,726 [salt.state       :1951][INFO    ][3213] Completed state [/etc/hostname] at time 16:20:46.726523 duration_in_ms=43.655
2018-11-05 16:20:46,730 [salt.state       :1780][INFO    ][3213] Running state [hostname mdb01] at time 16:20:46.730421
2018-11-05 16:20:46,730 [salt.state       :1813][INFO    ][3213] Executing state cmd.run for [hostname mdb01]
2018-11-05 16:20:46,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-11-05 16:20:46,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'hostname mdb01' in directory '/root'
2018-11-05 16:20:46,782 [salt.state       :300 ][INFO    ][3213] {'pid': 5491, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-11-05 16:20:46,782 [salt.state       :1951][INFO    ][3213] Completed state [hostname mdb01] at time 16:20:46.782745 duration_in_ms=52.323
2018-11-05 16:20:46,788 [salt.state       :1780][INFO    ][3213] Running state [mdb02] at time 16:20:46.788349
2018-11-05 16:20:46,788 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb02]
2018-11-05 16:20:46,790 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb02'}
2018-11-05 16:20:46,791 [salt.state       :1951][INFO    ][3213] Completed state [mdb02] at time 16:20:46.791118 duration_in_ms=2.769
2018-11-05 16:20:46,791 [salt.state       :1780][INFO    ][3213] Running state [mdb02.mcp-ovs-dpdk-ha.local] at time 16:20:46.791635
2018-11-05 16:20:46,793 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb02.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,795 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb02.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,795 [salt.state       :1951][INFO    ][3213] Completed state [mdb02.mcp-ovs-dpdk-ha.local] at time 16:20:46.795427 duration_in_ms=3.792
2018-11-05 16:20:46,795 [salt.state       :1780][INFO    ][3213] Running state [mdb03] at time 16:20:46.795801
2018-11-05 16:20:46,796 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb03]
2018-11-05 16:20:46,797 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb03'}
2018-11-05 16:20:46,797 [salt.state       :1951][INFO    ][3213] Completed state [mdb03] at time 16:20:46.797189 duration_in_ms=1.388
2018-11-05 16:20:46,799 [salt.state       :1780][INFO    ][3213] Running state [mdb03.mcp-ovs-dpdk-ha.local] at time 16:20:46.799279
2018-11-05 16:20:46,799 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb03.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,800 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb03.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,800 [salt.state       :1951][INFO    ][3213] Completed state [mdb03.mcp-ovs-dpdk-ha.local] at time 16:20:46.800668 duration_in_ms=1.389
2018-11-05 16:20:46,801 [salt.state       :1780][INFO    ][3213] Running state [mdb01] at time 16:20:46.801034
2018-11-05 16:20:46,801 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb01]
2018-11-05 16:20:46,802 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb01'}
2018-11-05 16:20:46,803 [salt.state       :1951][INFO    ][3213] Completed state [mdb01] at time 16:20:46.803057 duration_in_ms=2.023
2018-11-05 16:20:46,803 [salt.state       :1780][INFO    ][3213] Running state [mdb01.mcp-ovs-dpdk-ha.local] at time 16:20:46.803427
2018-11-05 16:20:46,803 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,805 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,806 [salt.state       :1951][INFO    ][3213] Completed state [mdb01.mcp-ovs-dpdk-ha.local] at time 16:20:46.806549 duration_in_ms=3.122
2018-11-05 16:20:46,806 [salt.state       :1780][INFO    ][3213] Running state [mdb] at time 16:20:46.806919
2018-11-05 16:20:46,807 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb]
2018-11-05 16:20:46,808 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb'}
2018-11-05 16:20:46,808 [salt.state       :1951][INFO    ][3213] Completed state [mdb] at time 16:20:46.808616 duration_in_ms=1.697
2018-11-05 16:20:46,809 [salt.state       :1780][INFO    ][3213] Running state [mdb.mcp-ovs-dpdk-ha.local] at time 16:20:46.808985
2018-11-05 16:20:46,809 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mdb.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,812 [salt.state       :300 ][INFO    ][3213] {'host': 'mdb.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,813 [salt.state       :1951][INFO    ][3213] Completed state [mdb.mcp-ovs-dpdk-ha.local] at time 16:20:46.813031 duration_in_ms=4.046
2018-11-05 16:20:46,813 [salt.state       :1780][INFO    ][3213] Running state [cfg01] at time 16:20:46.813408
2018-11-05 16:20:46,814 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cfg01]
2018-11-05 16:20:46,815 [salt.state       :300 ][INFO    ][3213] {'host': 'cfg01'}
2018-11-05 16:20:46,815 [salt.state       :1951][INFO    ][3213] Completed state [cfg01] at time 16:20:46.815681 duration_in_ms=2.273
2018-11-05 16:20:46,816 [salt.state       :1780][INFO    ][3213] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 16:20:46.816044
2018-11-05 16:20:46,816 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,818 [salt.state       :300 ][INFO    ][3213] {'host': 'cfg01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,818 [salt.state       :1951][INFO    ][3213] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 16:20:46.818602 duration_in_ms=2.558
2018-11-05 16:20:46,819 [salt.state       :1780][INFO    ][3213] Running state [prx01] at time 16:20:46.818969
2018-11-05 16:20:46,819 [salt.state       :1813][INFO    ][3213] Executing state host.present for [prx01]
2018-11-05 16:20:46,820 [salt.state       :300 ][INFO    ][3213] {'host': 'prx01'}
2018-11-05 16:20:46,820 [salt.state       :1951][INFO    ][3213] Completed state [prx01] at time 16:20:46.820908 duration_in_ms=1.939
2018-11-05 16:20:46,821 [salt.state       :1780][INFO    ][3213] Running state [prx01.mcp-ovs-dpdk-ha.local] at time 16:20:46.821280
2018-11-05 16:20:46,822 [salt.state       :1813][INFO    ][3213] Executing state host.present for [prx01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,823 [salt.state       :300 ][INFO    ][3213] {'host': 'prx01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,823 [salt.state       :1951][INFO    ][3213] Completed state [prx01.mcp-ovs-dpdk-ha.local] at time 16:20:46.823270 duration_in_ms=1.99
2018-11-05 16:20:46,823 [salt.state       :1780][INFO    ][3213] Running state [kvm01] at time 16:20:46.823636
2018-11-05 16:20:46,823 [salt.state       :1813][INFO    ][3213] Executing state host.present for [kvm01]
2018-11-05 16:20:46,824 [salt.state       :300 ][INFO    ][3213] {'host': 'kvm01'}
2018-11-05 16:20:46,825 [salt.state       :1951][INFO    ][3213] Completed state [kvm01] at time 16:20:46.825035 duration_in_ms=1.399
2018-11-05 16:20:46,825 [salt.state       :1780][INFO    ][3213] Running state [kvm01.mcp-ovs-dpdk-ha.local] at time 16:20:46.825398
2018-11-05 16:20:46,826 [salt.state       :1813][INFO    ][3213] Executing state host.present for [kvm01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,828 [salt.state       :300 ][INFO    ][3213] {'host': 'kvm01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,829 [salt.state       :1951][INFO    ][3213] Completed state [kvm01.mcp-ovs-dpdk-ha.local] at time 16:20:46.829115 duration_in_ms=3.717
2018-11-05 16:20:46,829 [salt.state       :1780][INFO    ][3213] Running state [kvm03] at time 16:20:46.829798
2018-11-05 16:20:46,830 [salt.state       :1813][INFO    ][3213] Executing state host.present for [kvm03]
2018-11-05 16:20:46,831 [salt.state       :300 ][INFO    ][3213] {'host': 'kvm03'}
2018-11-05 16:20:46,831 [salt.state       :1951][INFO    ][3213] Completed state [kvm03] at time 16:20:46.831527 duration_in_ms=1.729
2018-11-05 16:20:46,831 [salt.state       :1780][INFO    ][3213] Running state [kvm03.mcp-ovs-dpdk-ha.local] at time 16:20:46.831898
2018-11-05 16:20:46,832 [salt.state       :1813][INFO    ][3213] Executing state host.present for [kvm03.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,833 [salt.state       :300 ][INFO    ][3213] {'host': 'kvm03.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,833 [salt.state       :1951][INFO    ][3213] Completed state [kvm03.mcp-ovs-dpdk-ha.local] at time 16:20:46.833314 duration_in_ms=1.416
2018-11-05 16:20:46,834 [salt.state       :1780][INFO    ][3213] Running state [kvm02] at time 16:20:46.834841
2018-11-05 16:20:46,835 [salt.state       :1813][INFO    ][3213] Executing state host.present for [kvm02]
2018-11-05 16:20:46,836 [salt.state       :300 ][INFO    ][3213] {'host': 'kvm02'}
2018-11-05 16:20:46,836 [salt.state       :1951][INFO    ][3213] Completed state [kvm02] at time 16:20:46.836280 duration_in_ms=1.439
2018-11-05 16:20:46,836 [salt.state       :1780][INFO    ][3213] Running state [kvm02.mcp-ovs-dpdk-ha.local] at time 16:20:46.836654
2018-11-05 16:20:46,837 [salt.state       :1813][INFO    ][3213] Executing state host.present for [kvm02.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,839 [salt.state       :300 ][INFO    ][3213] {'host': 'kvm02.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,840 [salt.state       :1951][INFO    ][3213] Completed state [kvm02.mcp-ovs-dpdk-ha.local] at time 16:20:46.840102 duration_in_ms=3.448
2018-11-05 16:20:46,840 [salt.state       :1780][INFO    ][3213] Running state [dbs] at time 16:20:46.840478
2018-11-05 16:20:46,840 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs]
2018-11-05 16:20:46,841 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs'}
2018-11-05 16:20:46,842 [salt.state       :1951][INFO    ][3213] Completed state [dbs] at time 16:20:46.842000 duration_in_ms=1.522
2018-11-05 16:20:46,842 [salt.state       :1780][INFO    ][3213] Running state [dbs.mcp-ovs-dpdk-ha.local] at time 16:20:46.842374
2018-11-05 16:20:46,842 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,843 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,843 [salt.state       :1951][INFO    ][3213] Completed state [dbs.mcp-ovs-dpdk-ha.local] at time 16:20:46.843852 duration_in_ms=1.478
2018-11-05 16:20:46,844 [salt.state       :1780][INFO    ][3213] Running state [prx] at time 16:20:46.844528
2018-11-05 16:20:46,845 [salt.state       :1813][INFO    ][3213] Executing state host.present for [prx]
2018-11-05 16:20:46,847 [salt.state       :300 ][INFO    ][3213] {'host': 'prx'}
2018-11-05 16:20:46,847 [salt.state       :1951][INFO    ][3213] Completed state [prx] at time 16:20:46.847515 duration_in_ms=2.986
2018-11-05 16:20:46,847 [salt.state       :1780][INFO    ][3213] Running state [prx.mcp-ovs-dpdk-ha.local] at time 16:20:46.847892
2018-11-05 16:20:46,848 [salt.state       :1813][INFO    ][3213] Executing state host.present for [prx.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,850 [salt.state       :300 ][INFO    ][3213] {'host': 'prx.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,850 [salt.state       :1951][INFO    ][3213] Completed state [prx.mcp-ovs-dpdk-ha.local] at time 16:20:46.850275 duration_in_ms=2.383
2018-11-05 16:20:46,850 [salt.state       :1780][INFO    ][3213] Running state [prx02] at time 16:20:46.850653
2018-11-05 16:20:46,850 [salt.state       :1813][INFO    ][3213] Executing state host.present for [prx02]
2018-11-05 16:20:46,852 [salt.state       :300 ][INFO    ][3213] {'host': 'prx02'}
2018-11-05 16:20:46,852 [salt.state       :1951][INFO    ][3213] Completed state [prx02] at time 16:20:46.852582 duration_in_ms=1.929
2018-11-05 16:20:46,853 [salt.state       :1780][INFO    ][3213] Running state [prx02.mcp-ovs-dpdk-ha.local] at time 16:20:46.852965
2018-11-05 16:20:46,853 [salt.state       :1813][INFO    ][3213] Executing state host.present for [prx02.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,855 [salt.state       :300 ][INFO    ][3213] {'host': 'prx02.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,855 [salt.state       :1951][INFO    ][3213] Completed state [prx02.mcp-ovs-dpdk-ha.local] at time 16:20:46.855632 duration_in_ms=2.667
2018-11-05 16:20:46,856 [salt.state       :1780][INFO    ][3213] Running state [msg02] at time 16:20:46.856298
2018-11-05 16:20:46,856 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg02]
2018-11-05 16:20:46,858 [salt.state       :300 ][INFO    ][3213] {'host': 'msg02'}
2018-11-05 16:20:46,858 [salt.state       :1951][INFO    ][3213] Completed state [msg02] at time 16:20:46.858409 duration_in_ms=2.111
2018-11-05 16:20:46,858 [salt.state       :1780][INFO    ][3213] Running state [msg02.mcp-ovs-dpdk-ha.local] at time 16:20:46.858798
2018-11-05 16:20:46,859 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg02.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,860 [salt.state       :300 ][INFO    ][3213] {'host': 'msg02.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,860 [salt.state       :1951][INFO    ][3213] Completed state [msg02.mcp-ovs-dpdk-ha.local] at time 16:20:46.860645 duration_in_ms=1.847
2018-11-05 16:20:46,861 [salt.state       :1780][INFO    ][3213] Running state [msg03] at time 16:20:46.861028
2018-11-05 16:20:46,861 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg03]
2018-11-05 16:20:46,867 [salt.state       :300 ][INFO    ][3213] {'host': 'msg03'}
2018-11-05 16:20:46,867 [salt.state       :1951][INFO    ][3213] Completed state [msg03] at time 16:20:46.867380 duration_in_ms=6.352
2018-11-05 16:20:46,867 [salt.state       :1780][INFO    ][3213] Running state [msg03.mcp-ovs-dpdk-ha.local] at time 16:20:46.867777
2018-11-05 16:20:46,868 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg03.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,869 [salt.state       :300 ][INFO    ][3213] {'host': 'msg03.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,870 [salt.state       :1951][INFO    ][3213] Completed state [msg03.mcp-ovs-dpdk-ha.local] at time 16:20:46.869304 duration_in_ms=1.527
2018-11-05 16:20:46,870 [salt.state       :1780][INFO    ][3213] Running state [msg01] at time 16:20:46.870548
2018-11-05 16:20:46,871 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg01]
2018-11-05 16:20:46,872 [salt.state       :300 ][INFO    ][3213] {'host': 'msg01'}
2018-11-05 16:20:46,872 [salt.state       :1951][INFO    ][3213] Completed state [msg01] at time 16:20:46.872351 duration_in_ms=1.803
2018-11-05 16:20:46,872 [salt.state       :1780][INFO    ][3213] Running state [msg01.mcp-ovs-dpdk-ha.local] at time 16:20:46.872739
2018-11-05 16:20:46,873 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,874 [salt.state       :300 ][INFO    ][3213] {'host': 'msg01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,875 [salt.state       :1951][INFO    ][3213] Completed state [msg01.mcp-ovs-dpdk-ha.local] at time 16:20:46.875008 duration_in_ms=2.269
2018-11-05 16:20:46,875 [salt.state       :1780][INFO    ][3213] Running state [msg] at time 16:20:46.875399
2018-11-05 16:20:46,875 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg]
2018-11-05 16:20:46,877 [salt.state       :300 ][INFO    ][3213] {'host': 'msg'}
2018-11-05 16:20:46,877 [salt.state       :1951][INFO    ][3213] Completed state [msg] at time 16:20:46.877198 duration_in_ms=1.799
2018-11-05 16:20:46,878 [salt.state       :1780][INFO    ][3213] Running state [msg.mcp-ovs-dpdk-ha.local] at time 16:20:46.878455
2018-11-05 16:20:46,879 [salt.state       :1813][INFO    ][3213] Executing state host.present for [msg.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,880 [salt.state       :300 ][INFO    ][3213] {'host': 'msg.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,880 [salt.state       :1951][INFO    ][3213] Completed state [msg.mcp-ovs-dpdk-ha.local] at time 16:20:46.880589 duration_in_ms=2.134
2018-11-05 16:20:46,881 [salt.state       :1780][INFO    ][3213] Running state [cfg01] at time 16:20:46.880978
2018-11-05 16:20:46,881 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cfg01]
2018-11-05 16:20:46,882 [salt.state       :300 ][INFO    ][3213] Host cfg01 (192.168.10.11) already present
2018-11-05 16:20:46,883 [salt.state       :1951][INFO    ][3213] Completed state [cfg01] at time 16:20:46.883133 duration_in_ms=2.155
2018-11-05 16:20:46,883 [salt.state       :1780][INFO    ][3213] Running state [cfg01.mcp-ovs-dpdk-ha.local] at time 16:20:46.883538
2018-11-05 16:20:46,883 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cfg01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,884 [salt.state       :300 ][INFO    ][3213] Host cfg01.mcp-ovs-dpdk-ha.local (192.168.10.11) already present
2018-11-05 16:20:46,885 [salt.state       :1951][INFO    ][3213] Completed state [cfg01.mcp-ovs-dpdk-ha.local] at time 16:20:46.885020 duration_in_ms=1.482
2018-11-05 16:20:46,886 [salt.state       :1780][INFO    ][3213] Running state [cmp002] at time 16:20:46.885408
2018-11-05 16:20:46,886 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cmp002]
2018-11-05 16:20:46,887 [salt.state       :300 ][INFO    ][3213] {'host': 'cmp002'}
2018-11-05 16:20:46,887 [salt.state       :1951][INFO    ][3213] Completed state [cmp002] at time 16:20:46.887845 duration_in_ms=2.436
2018-11-05 16:20:46,889 [salt.state       :1780][INFO    ][3213] Running state [cmp002.mcp-ovs-dpdk-ha.local] at time 16:20:46.889098
2018-11-05 16:20:46,889 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cmp002.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,891 [salt.state       :300 ][INFO    ][3213] {'host': 'cmp002.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,891 [salt.state       :1951][INFO    ][3213] Completed state [cmp002.mcp-ovs-dpdk-ha.local] at time 16:20:46.891274 duration_in_ms=2.176
2018-11-05 16:20:46,891 [salt.state       :1780][INFO    ][3213] Running state [cmp001] at time 16:20:46.891668
2018-11-05 16:20:46,891 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cmp001]
2018-11-05 16:20:46,904 [salt.state       :300 ][INFO    ][3213] {'host': 'cmp001'}
2018-11-05 16:20:46,905 [salt.state       :1951][INFO    ][3213] Completed state [cmp001] at time 16:20:46.904985 duration_in_ms=13.317
2018-11-05 16:20:46,905 [salt.state       :1780][INFO    ][3213] Running state [cmp001.mcp-ovs-dpdk-ha.local] at time 16:20:46.905402
2018-11-05 16:20:46,906 [salt.state       :1813][INFO    ][3213] Executing state host.present for [cmp001.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,907 [salt.state       :300 ][INFO    ][3213] {'host': 'cmp001.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,908 [salt.state       :1951][INFO    ][3213] Completed state [cmp001.mcp-ovs-dpdk-ha.local] at time 16:20:46.908495 duration_in_ms=3.093
2018-11-05 16:20:46,908 [salt.state       :1780][INFO    ][3213] Running state [dbs01] at time 16:20:46.908897
2018-11-05 16:20:46,909 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs01]
2018-11-05 16:20:46,911 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs01'}
2018-11-05 16:20:46,911 [salt.state       :1951][INFO    ][3213] Completed state [dbs01] at time 16:20:46.911693 duration_in_ms=2.796
2018-11-05 16:20:46,912 [salt.state       :1780][INFO    ][3213] Running state [dbs01.mcp-ovs-dpdk-ha.local] at time 16:20:46.912680
2018-11-05 16:20:46,912 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,915 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,915 [salt.state       :1951][INFO    ][3213] Completed state [dbs01.mcp-ovs-dpdk-ha.local] at time 16:20:46.915517 duration_in_ms=2.836
2018-11-05 16:20:46,917 [salt.state       :1780][INFO    ][3213] Running state [dbs02] at time 16:20:46.916503
2018-11-05 16:20:46,917 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs02]
2018-11-05 16:20:46,919 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs02'}
2018-11-05 16:20:46,919 [salt.state       :1951][INFO    ][3213] Completed state [dbs02] at time 16:20:46.919292 duration_in_ms=2.789
2018-11-05 16:20:46,919 [salt.state       :1780][INFO    ][3213] Running state [dbs02.mcp-ovs-dpdk-ha.local] at time 16:20:46.919704
2018-11-05 16:20:46,919 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs02.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,921 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs02.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,922 [salt.state       :1951][INFO    ][3213] Completed state [dbs02.mcp-ovs-dpdk-ha.local] at time 16:20:46.922753 duration_in_ms=3.049
2018-11-05 16:20:46,923 [salt.state       :1780][INFO    ][3213] Running state [dbs03] at time 16:20:46.923159
2018-11-05 16:20:46,923 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs03]
2018-11-05 16:20:46,924 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs03'}
2018-11-05 16:20:46,925 [salt.state       :1951][INFO    ][3213] Completed state [dbs03] at time 16:20:46.925079 duration_in_ms=1.92
2018-11-05 16:20:46,926 [salt.state       :1780][INFO    ][3213] Running state [dbs03.mcp-ovs-dpdk-ha.local] at time 16:20:46.926940
2018-11-05 16:20:46,927 [salt.state       :1813][INFO    ][3213] Executing state host.present for [dbs03.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,929 [salt.state       :300 ][INFO    ][3213] {'host': 'dbs03.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,929 [salt.state       :1951][INFO    ][3213] Completed state [dbs03.mcp-ovs-dpdk-ha.local] at time 16:20:46.929651 duration_in_ms=2.711
2018-11-05 16:20:46,930 [salt.state       :1780][INFO    ][3213] Running state [mas01] at time 16:20:46.930074
2018-11-05 16:20:46,930 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mas01]
2018-11-05 16:20:46,931 [salt.state       :300 ][INFO    ][3213] {'host': 'mas01'}
2018-11-05 16:20:46,931 [salt.state       :1951][INFO    ][3213] Completed state [mas01] at time 16:20:46.931753 duration_in_ms=1.679
2018-11-05 16:20:46,932 [salt.state       :1780][INFO    ][3213] Running state [mas01.mcp-ovs-dpdk-ha.local] at time 16:20:46.932478
2018-11-05 16:20:46,932 [salt.state       :1813][INFO    ][3213] Executing state host.present for [mas01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,934 [salt.state       :300 ][INFO    ][3213] {'host': 'mas01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,934 [salt.state       :1951][INFO    ][3213] Completed state [mas01.mcp-ovs-dpdk-ha.local] at time 16:20:46.934764 duration_in_ms=2.286
2018-11-05 16:20:46,935 [salt.state       :1780][INFO    ][3213] Running state [ctl02] at time 16:20:46.935178
2018-11-05 16:20:46,935 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl02]
2018-11-05 16:20:46,937 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl02'}
2018-11-05 16:20:46,938 [salt.state       :1951][INFO    ][3213] Completed state [ctl02] at time 16:20:46.937386 duration_in_ms=2.208
2018-11-05 16:20:46,939 [salt.state       :1780][INFO    ][3213] Running state [ctl02.mcp-ovs-dpdk-ha.local] at time 16:20:46.938980
2018-11-05 16:20:46,939 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl02.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,941 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl02.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,941 [salt.state       :1951][INFO    ][3213] Completed state [ctl02.mcp-ovs-dpdk-ha.local] at time 16:20:46.941218 duration_in_ms=2.238
2018-11-05 16:20:46,941 [salt.state       :1780][INFO    ][3213] Running state [ctl03] at time 16:20:46.941650
2018-11-05 16:20:46,941 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl03]
2018-11-05 16:20:46,943 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl03'}
2018-11-05 16:20:46,943 [salt.state       :1951][INFO    ][3213] Completed state [ctl03] at time 16:20:46.943357 duration_in_ms=1.707
2018-11-05 16:20:46,943 [salt.state       :1780][INFO    ][3213] Running state [ctl03.mcp-ovs-dpdk-ha.local] at time 16:20:46.943772
2018-11-05 16:20:46,944 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl03.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,946 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl03.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,947 [salt.state       :1951][INFO    ][3213] Completed state [ctl03.mcp-ovs-dpdk-ha.local] at time 16:20:46.947145 duration_in_ms=3.373
2018-11-05 16:20:46,947 [salt.state       :1780][INFO    ][3213] Running state [ctl01] at time 16:20:46.947556
2018-11-05 16:20:46,947 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl01]
2018-11-05 16:20:46,949 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl01'}
2018-11-05 16:20:46,949 [salt.state       :1951][INFO    ][3213] Completed state [ctl01] at time 16:20:46.949848 duration_in_ms=2.291
2018-11-05 16:20:46,950 [salt.state       :1780][INFO    ][3213] Running state [ctl01.mcp-ovs-dpdk-ha.local] at time 16:20:46.950292
2018-11-05 16:20:46,950 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl01.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,951 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl01.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,952 [salt.state       :1951][INFO    ][3213] Completed state [ctl01.mcp-ovs-dpdk-ha.local] at time 16:20:46.952140 duration_in_ms=1.847
2018-11-05 16:20:46,952 [salt.state       :1780][INFO    ][3213] Running state [ctl] at time 16:20:46.952553
2018-11-05 16:20:46,953 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl]
2018-11-05 16:20:46,954 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl'}
2018-11-05 16:20:46,954 [salt.state       :1951][INFO    ][3213] Completed state [ctl] at time 16:20:46.954873 duration_in_ms=2.32
2018-11-05 16:20:46,955 [salt.state       :1780][INFO    ][3213] Running state [ctl.mcp-ovs-dpdk-ha.local] at time 16:20:46.955299
2018-11-05 16:20:46,955 [salt.state       :1813][INFO    ][3213] Executing state host.present for [ctl.mcp-ovs-dpdk-ha.local]
2018-11-05 16:20:46,957 [salt.state       :300 ][INFO    ][3213] {'host': 'ctl.mcp-ovs-dpdk-ha.local'}
2018-11-05 16:20:46,957 [salt.state       :1951][INFO    ][3213] Completed state [ctl.mcp-ovs-dpdk-ha.local] at time 16:20:46.957281 duration_in_ms=1.982
2018-11-05 16:20:46,958 [salt.state       :1780][INFO    ][3213] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 16:20:46.958668
2018-11-05 16:20:46,958 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-11-05 16:20:46,959 [salt.state       :300 ][INFO    ][3213] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-11-05 16:20:46,959 [salt.state       :1951][INFO    ][3213] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 16:20:46.959578 duration_in_ms=0.91
2018-11-05 16:20:46,960 [salt.state       :1780][INFO    ][3213] Running state [ens3] at time 16:20:46.960711
2018-11-05 16:20:46,960 [salt.state       :1813][INFO    ][3213] Executing state network.managed for [ens3]
2018-11-05 16:20:47,191 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['ifup', 'ens3'] in directory '/root'
2018-11-05 16:20:48,273 [salt.state       :300 ][INFO    ][3213] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-11-05 16:20:48,275 [salt.state       :1951][INFO    ][3213] Completed state [ens3] at time 16:20:48.275772 duration_in_ms=1315.059
2018-11-05 16:20:48,276 [salt.state       :1780][INFO    ][3213] Running state [ens2] at time 16:20:48.276626
2018-11-05 16:20:48,277 [salt.state       :1813][INFO    ][3213] Executing state network.managed for [ens2]
2018-11-05 16:20:48,329 [salt.state       :300 ][INFO    ][3213] {'interface': 'Added network interface.'}
2018-11-05 16:20:48,330 [salt.state       :1951][INFO    ][3213] Completed state [ens2] at time 16:20:48.330712 duration_in_ms=54.086
2018-11-05 16:20:48,331 [salt.state       :1780][INFO    ][3213] Running state [linux_system_network] at time 16:20:48.331435
2018-11-05 16:20:48,332 [salt.state       :1813][INFO    ][3213] Executing state network.system for [linux_system_network]
2018-11-05 16:20:48,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-11-05 16:20:48,362 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-11-05 16:20:48,396 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-11-05 16:20:48,427 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-11-05 16:20:48,960 [salt.loaded.int.module.debian_ip:1964][WARNING ][3213] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-11-05 16:20:48,963 [salt.state       :300 ][INFO    ][3213] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-dpdk-ha.local\n\n+SEARCH=maas\n'}
2018-11-05 16:20:48,967 [salt.state       :1951][INFO    ][3213] Completed state [linux_system_network] at time 16:20:48.967436 duration_in_ms=636.001
2018-11-05 16:20:48,968 [salt.state       :1780][INFO    ][3213] Running state [/etc/profile.d/proxy.sh] at time 16:20:48.968410
2018-11-05 16:20:48,969 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-11-05 16:20:48,969 [salt.state       :300 ][INFO    ][3213] File /etc/profile.d/proxy.sh is not present
2018-11-05 16:20:48,970 [salt.state       :1951][INFO    ][3213] Completed state [/etc/profile.d/proxy.sh] at time 16:20:48.970660 duration_in_ms=2.25
2018-11-05 16:20:48,971 [salt.state       :1780][INFO    ][3213] Running state [/etc/apt/apt.conf.d/95proxies] at time 16:20:48.971160
2018-11-05 16:20:48,972 [salt.state       :1813][INFO    ][3213] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-11-05 16:20:48,973 [salt.state       :300 ][INFO    ][3213] File /etc/apt/apt.conf.d/95proxies is not present
2018-11-05 16:20:48,974 [salt.state       :1951][INFO    ][3213] Completed state [/etc/apt/apt.conf.d/95proxies] at time 16:20:48.974458 duration_in_ms=3.298
2018-11-05 16:20:48,976 [salt.state       :1780][INFO    ][3213] Running state [/dev/shm] at time 16:20:48.976674
2018-11-05 16:20:48,977 [salt.state       :1813][INFO    ][3213] Executing state mount.mounted for [/dev/shm]
2018-11-05 16:20:48,978 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'mount -l' in directory '/root'
2018-11-05 16:20:49,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'blkid' in directory '/root'
2018-11-05 16:20:49,026 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'mount -l' in directory '/root'
2018-11-05 16:20:49,046 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-11-05 16:20:49,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'mount -l' in directory '/root'
2018-11-05 16:20:49,095 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'mount -o rw,nosuid,nodev,noexec,relatime,remount -t tmpfs shm /dev/shm' in directory '/root'
2018-11-05 16:20:49,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'mount -l' in directory '/root'
2018-11-05 16:20:49,153 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'umount /dev/shm' in directory '/root'
2018-11-05 16:20:49,174 [salt.loaded.int.module.cmdmod:730 ][ERROR   ][3213] Command '['umount', '/dev/shm']' failed with return code: 32
2018-11-05 16:20:49,175 [salt.loaded.int.module.cmdmod:734 ][ERROR   ][3213] stderr: umount: /dev/shm: target is busy
        (In some cases useful info about processes that
         use the device is found by lsof(8) or fuser(1).)
2018-11-05 16:20:49,176 [salt.loaded.int.module.cmdmod:736 ][ERROR   ][3213] retcode: 32
2018-11-05 16:20:49,179 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'mount -l' in directory '/root'
2018-11-05 16:20:49,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command 'blkid' in directory '/root'
2018-11-05 16:20:49,223 [salt.state       :300 ][INFO    ][3213] {'umount': "Forced unmount because devices don't match. Wanted: shm, current: tmpfs, /tmpfs"}
2018-11-05 16:20:49,224 [salt.state       :1951][INFO    ][3213] Completed state [/dev/shm] at time 16:20:49.224886 duration_in_ms=248.211
2018-11-05 16:20:49,229 [salt.state       :1780][INFO    ][3213] Running state [ntp] at time 16:20:49.229179
2018-11-05 16:20:49,229 [salt.state       :1813][INFO    ][3213] Executing state pkg.installed for [ntp]
2018-11-05 16:20:49,608 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:20:49,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-11-05 16:20:50,810 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162050796473
2018-11-05 16:20:50,836 [salt.minion      :1432][INFO    ][5775] Starting a new job with PID 5775
2018-11-05 16:20:50,867 [salt.minion      :1711][INFO    ][5775] Returning information for job: 20181105162050796473
2018-11-05 16:20:55,323 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:20:55,389 [salt.state       :300 ][INFO    ][3213] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-11-05 16:20:55,424 [salt.state       :915 ][INFO    ][3213] Loading fresh modules for state activity
2018-11-05 16:20:55,484 [salt.state       :1951][INFO    ][3213] Completed state [ntp] at time 16:20:55.484167 duration_in_ms=6254.988
2018-11-05 16:20:55,491 [salt.state       :1780][INFO    ][3213] Running state [/etc/ntp.conf] at time 16:20:55.491349
2018-11-05 16:20:55,492 [salt.state       :1813][INFO    ][3213] Executing state file.managed for [/etc/ntp.conf]
2018-11-05 16:20:55,517 [salt.fileclient  :1219][INFO    ][3213] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-11-05 16:20:55,614 [salt.state       :300 ][INFO    ][3213] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-11-05 16:20:55,614 [salt.state       :1951][INFO    ][3213] Completed state [/etc/ntp.conf] at time 16:20:55.614479 duration_in_ms=123.129
2018-11-05 16:20:56,301 [salt.state       :1780][INFO    ][3213] Running state [ntp] at time 16:20:56.301802
2018-11-05 16:20:56,302 [salt.state       :1813][INFO    ][3213] Executing state service.running for [ntp]
2018-11-05 16:20:56,303 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-11-05 16:20:56,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-05 16:20:56,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-11-05 16:20:56,373 [salt.state       :300 ][INFO    ][3213] The service ntp is already running
2018-11-05 16:20:56,374 [salt.state       :1951][INFO    ][3213] Completed state [ntp] at time 16:20:56.373895 duration_in_ms=72.093
2018-11-05 16:20:56,374 [salt.state       :1780][INFO    ][3213] Running state [ntp] at time 16:20:56.374284
2018-11-05 16:20:56,374 [salt.state       :1813][INFO    ][3213] Executing state service.mod_watch for [ntp]
2018-11-05 16:20:56,375 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-11-05 16:20:56,400 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3213] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-11-05 16:20:56,500 [salt.state       :300 ][INFO    ][3213] {'ntp': True}
2018-11-05 16:20:56,501 [salt.state       :1951][INFO    ][3213] Completed state [ntp] at time 16:20:56.501301 duration_in_ms=127.016
2018-11-05 16:20:56,512 [salt.minion      :1711][INFO    ][3213] Returning information for job: 20181105161954101867
2018-11-05 16:21:01,252 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181105162101236785
2018-11-05 16:21:01,286 [salt.minion      :1432][INFO    ][6682] Starting a new job with PID 6682
2018-11-05 16:21:01,312 [salt.minion      :1711][INFO    ][6682] Returning information for job: 20181105162101236785
2018-11-05 16:21:26,821 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181105162126803493
2018-11-05 16:21:26,849 [salt.minion      :1432][INFO    ][6698] Starting a new job with PID 6698
2018-11-05 16:21:26,875 [salt.minion      :1711][INFO    ][6698] Returning information for job: 20181105162126803493
2018-11-05 16:21:43,744 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command pkg.upgrade with jid 20181105162143728732
2018-11-05 16:21:43,777 [salt.minion      :1432][INFO    ][6703] Starting a new job with PID 6703
2018-11-05 16:21:43,808 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6703] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:21:44,386 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6703] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-11-05 16:21:48,836 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162148822181
2018-11-05 16:21:48,860 [salt.minion      :1432][INFO    ][6840] Starting a new job with PID 6840
2018-11-05 16:21:49,024 [salt.minion      :1711][INFO    ][6840] Returning information for job: 20181105162148822181
2018-11-05 16:21:58,862 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162158842281
2018-11-05 16:21:58,893 [salt.minion      :1432][INFO    ][8833] Starting a new job with PID 8833
2018-11-05 16:21:58,922 [salt.minion      :1711][INFO    ][8833] Returning information for job: 20181105162158842281
2018-11-05 16:22:08,883 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162208866229
2018-11-05 16:22:08,918 [salt.minion      :1432][INFO    ][9067] Starting a new job with PID 9067
2018-11-05 16:22:08,980 [salt.minion      :1711][INFO    ][9067] Returning information for job: 20181105162208866229
2018-11-05 16:22:18,923 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162218910227
2018-11-05 16:22:18,954 [salt.minion      :1432][INFO    ][9674] Starting a new job with PID 9674
2018-11-05 16:22:19,154 [salt.minion      :1711][INFO    ][9674] Returning information for job: 20181105162218910227
2018-11-05 16:22:29,094 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162229077464
2018-11-05 16:22:29,117 [salt.minion      :1432][INFO    ][10060] Starting a new job with PID 10060
2018-11-05 16:22:29,141 [salt.minion      :1711][INFO    ][10060] Returning information for job: 20181105162229077464
2018-11-05 16:22:39,300 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162239286138
2018-11-05 16:22:39,334 [salt.minion      :1432][INFO    ][11952] Starting a new job with PID 11952
2018-11-05 16:22:39,362 [salt.minion      :1711][INFO    ][11952] Returning information for job: 20181105162239286138
2018-11-05 16:22:49,466 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162249451263
2018-11-05 16:22:49,500 [salt.minion      :1432][INFO    ][14053] Starting a new job with PID 14053
2018-11-05 16:22:49,531 [salt.minion      :1711][INFO    ][14053] Returning information for job: 20181105162249451263
2018-11-05 16:22:59,677 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162259662671
2018-11-05 16:22:59,706 [salt.minion      :1432][INFO    ][15130] Starting a new job with PID 15130
2018-11-05 16:22:59,733 [salt.minion      :1711][INFO    ][15130] Returning information for job: 20181105162259662671
2018-11-05 16:23:09,695 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162309681333
2018-11-05 16:23:09,735 [salt.minion      :1432][INFO    ][16552] Starting a new job with PID 16552
2018-11-05 16:23:09,763 [salt.minion      :1711][INFO    ][16552] Returning information for job: 20181105162309681333
2018-11-05 16:23:19,811 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162319797169
2018-11-05 16:23:19,840 [salt.minion      :1432][INFO    ][17515] Starting a new job with PID 17515
2018-11-05 16:23:19,862 [salt.minion      :1711][INFO    ][17515] Returning information for job: 20181105162319797169
2018-11-05 16:23:26,370 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6703] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:23:26,418 [salt.minion      :1711][INFO    ][6703] Returning information for job: 20181105162143728732
2018-11-05 16:23:55,881 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command test.ping with jid 20181105162355867741
2018-11-05 16:23:55,914 [salt.minion      :1432][INFO    ][17561] Starting a new job with PID 17561
2018-11-05 16:23:55,945 [salt.minion      :1711][INFO    ][17561] Returning information for job: 20181105162355867741
2018-11-05 16:24:51,610 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105162451594352
2018-11-05 16:24:51,632 [salt.minion      :1432][INFO    ][17566] Starting a new job with PID 17566
2018-11-05 16:24:56,626 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162456613019
2018-11-05 16:24:56,650 [salt.minion      :1432][INFO    ][17571] Starting a new job with PID 17571
2018-11-05 16:24:56,668 [salt.minion      :1711][INFO    ][17571] Returning information for job: 20181105162456613019
2018-11-05 16:24:57,961 [salt.state       :915 ][INFO    ][17566] Loading fresh modules for state activity
2018-11-05 16:24:58,018 [salt.fileclient  :1219][INFO    ][17566] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-11-05 16:24:58,054 [salt.fileclient  :1219][INFO    ][17566] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-11-05 16:24:58,880 [salt.state       :1780][INFO    ][17566] Running state [keepalived] at time 16:24:58.880343
2018-11-05 16:24:58,881 [salt.state       :1813][INFO    ][17566] Executing state pkg.installed for [keepalived]
2018-11-05 16:24:58,882 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:24:59,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-11-05 16:24:59,525 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 16:25:01,566 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:25:01,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-11-05 16:25:06,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:25:06,705 [salt.state       :300 ][INFO    ][17566] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-11-05 16:25:06,730 [salt.state       :915 ][INFO    ][17566] Loading fresh modules for state activity
2018-11-05 16:25:06,738 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105162506726671
2018-11-05 16:25:06,756 [salt.minion      :1432][INFO    ][18852] Starting a new job with PID 18852
2018-11-05 16:25:06,775 [salt.state       :1951][INFO    ][17566] Completed state [keepalived] at time 16:25:06.775881 duration_in_ms=7895.539
2018-11-05 16:25:06,782 [salt.minion      :1711][INFO    ][18852] Returning information for job: 20181105162506726671
2018-11-05 16:25:06,782 [salt.state       :1780][INFO    ][17566] Running state [lsof] at time 16:25:06.782505
2018-11-05 16:25:06,783 [salt.state       :1813][INFO    ][17566] Executing state pkg.installed for [lsof]
2018-11-05 16:25:07,619 [salt.state       :300 ][INFO    ][17566] All specified packages are already installed
2018-11-05 16:25:07,620 [salt.state       :1951][INFO    ][17566] Completed state [lsof] at time 16:25:07.620350 duration_in_ms=837.843
2018-11-05 16:25:07,624 [salt.state       :1780][INFO    ][17566] Running state [/etc/keepalived/keepalived.conf] at time 16:25:07.624154
2018-11-05 16:25:07,625 [salt.state       :1813][INFO    ][17566] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-11-05 16:25:07,653 [salt.fileclient  :1219][INFO    ][17566] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-11-05 16:25:07,710 [salt.state       :300 ][INFO    ][17566] File changed:
New file
2018-11-05 16:25:07,711 [salt.state       :1951][INFO    ][17566] Completed state [/etc/keepalived/keepalived.conf] at time 16:25:07.711049 duration_in_ms=86.894
2018-11-05 16:25:07,712 [salt.state       :1780][INFO    ][17566] Running state [keepalived] at time 16:25:07.712771
2018-11-05 16:25:07,713 [salt.state       :1813][INFO    ][17566] Executing state service.running for [keepalived]
2018-11-05 16:25:07,714 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-11-05 16:25:07,742 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-11-05 16:25:07,768 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-05 16:25:07,795 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-11-05 16:25:07,875 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-11-05 16:25:07,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-05 16:25:07,929 [salt.loaded.int.module.cmdmod:395 ][INFO    ][17566] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-11-05 16:25:07,951 [salt.state       :300 ][INFO    ][17566] {'keepalived': True}
2018-11-05 16:25:07,951 [salt.state       :1951][INFO    ][17566] Completed state [keepalived] at time 16:25:07.951823 duration_in_ms=239.051
2018-11-05 16:25:07,954 [salt.minion      :1711][INFO    ][17566] Returning information for job: 20181105162451594352
2018-11-05 16:27:56,836 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command pillar.get with jid 20181105162756826039
2018-11-05 16:27:56,865 [salt.minion      :1432][INFO    ][19025] Starting a new job with PID 19025
2018-11-05 16:27:56,878 [salt.minion      :1711][INFO    ][19025] Returning information for job: 20181105162756826039
2018-11-05 16:40:44,032 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105164044013525
2018-11-05 16:40:44,061 [salt.minion      :1432][INFO    ][19084] Starting a new job with PID 19084
2018-11-05 16:40:50,040 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105164050020386
2018-11-05 16:40:50,064 [salt.minion      :1432][INFO    ][19089] Starting a new job with PID 19089
2018-11-05 16:40:50,085 [salt.minion      :1711][INFO    ][19089] Returning information for job: 20181105164050020386
2018-11-05 16:40:51,068 [salt.state       :915 ][INFO    ][19084] Loading fresh modules for state activity
2018-11-05 16:40:54,163 [salt.fileclient  :1219][INFO    ][19084] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-11-05 16:40:54,200 [salt.fileclient  :1219][INFO    ][19084] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-11-05 16:40:54,232 [salt.fileclient  :1219][INFO    ][19084] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-11-05 16:40:55,079 [salt.state       :1780][INFO    ][19084] Running state [memcached] at time 16:40:55.079237
2018-11-05 16:40:55,080 [salt.state       :1813][INFO    ][19084] Executing state pkg.installed for [memcached]
2018-11-05 16:40:55,081 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:40:55,644 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-11-05 16:40:55,872 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 16:41:00,065 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105164100046315
2018-11-05 16:41:00,088 [salt.minion      :1432][INFO    ][19453] Starting a new job with PID 19453
2018-11-05 16:41:00,110 [salt.minion      :1711][INFO    ][19453] Returning information for job: 20181105164100046315
2018-11-05 16:41:01,159 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:41:01,191 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-11-05 16:41:05,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:41:05,087 [salt.state       :300 ][INFO    ][19084] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-11-05 16:41:05,111 [salt.state       :915 ][INFO    ][19084] Loading fresh modules for state activity
2018-11-05 16:41:05,161 [salt.state       :1951][INFO    ][19084] Completed state [memcached] at time 16:41:05.161524 duration_in_ms=10082.289
2018-11-05 16:41:05,168 [salt.state       :1780][INFO    ][19084] Running state [python-memcache] at time 16:41:05.168814
2018-11-05 16:41:05,169 [salt.state       :1813][INFO    ][19084] Executing state pkg.installed for [python-memcache]
2018-11-05 16:41:05,983 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:41:06,012 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-11-05 16:41:08,254 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:41:08,307 [salt.state       :300 ][INFO    ][19084] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-11-05 16:41:08,330 [salt.state       :915 ][INFO    ][19084] Loading fresh modules for state activity
2018-11-05 16:41:08,382 [salt.state       :1951][INFO    ][19084] Completed state [python-memcache] at time 16:41:08.382588 duration_in_ms=3213.772
2018-11-05 16:41:08,388 [salt.state       :1780][INFO    ][19084] Running state [/etc/memcached.conf] at time 16:41:08.388954
2018-11-05 16:41:08,389 [salt.state       :1813][INFO    ][19084] Executing state file.managed for [/etc/memcached.conf]
2018-11-05 16:41:08,421 [salt.fileclient  :1219][INFO    ][19084] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-11-05 16:41:08,461 [salt.state       :300 ][INFO    ][19084] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,12 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
-
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +30,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +45,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-11-05 16:41:08,461 [salt.state       :1951][INFO    ][19084] Completed state [/etc/memcached.conf] at time 16:41:08.461689 duration_in_ms=72.735
2018-11-05 16:41:09,046 [salt.state       :1780][INFO    ][19084] Running state [memcached] at time 16:41:09.046502
2018-11-05 16:41:09,047 [salt.state       :1813][INFO    ][19084] Executing state service.running for [memcached]
2018-11-05 16:41:09,048 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-11-05 16:41:09,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-11-05 16:41:09,102 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-11-05 16:41:09,124 [salt.state       :300 ][INFO    ][19084] The service memcached is already running
2018-11-05 16:41:09,126 [salt.state       :1951][INFO    ][19084] Completed state [memcached] at time 16:41:09.126057 duration_in_ms=79.554
2018-11-05 16:41:09,127 [salt.state       :1780][INFO    ][19084] Running state [memcached] at time 16:41:09.127138
2018-11-05 16:41:09,128 [salt.state       :1813][INFO    ][19084] Executing state service.mod_watch for [memcached]
2018-11-05 16:41:09,130 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-11-05 16:41:09,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19084] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-11-05 16:41:09,199 [salt.state       :300 ][INFO    ][19084] {'memcached': True}
2018-11-05 16:41:09,200 [salt.state       :1951][INFO    ][19084] Completed state [memcached] at time 16:41:09.200170 duration_in_ms=73.032
2018-11-05 16:41:09,203 [salt.minion      :1711][INFO    ][19084] Returning information for job: 20181105164044013525
2018-11-05 16:41:09,921 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105164109899649
2018-11-05 16:41:09,949 [salt.minion      :1432][INFO    ][20100] Starting a new job with PID 20100
2018-11-05 16:41:16,219 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105164116202969
2018-11-05 16:41:16,247 [salt.minion      :1432][INFO    ][20105] Starting a new job with PID 20105
2018-11-05 16:41:16,271 [salt.minion      :1711][INFO    ][20105] Returning information for job: 20181105164116202969
2018-11-05 16:41:18,820 [salt.state       :915 ][INFO    ][20100] Loading fresh modules for state activity
2018-11-05 16:41:19,682 [salt.fileclient  :1219][INFO    ][20100] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-11-05 16:41:19,724 [salt.fileclient  :1219][INFO    ][20100] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-11-05 16:41:20,668 [salt.state       :1780][INFO    ][20100] Running state [haproxy] at time 16:41:20.668331
2018-11-05 16:41:20,669 [salt.state       :1813][INFO    ][20100] Executing state pkg.installed for [haproxy]
2018-11-05 16:41:20,671 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:41:21,237 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-11-05 16:41:21,398 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 16:41:23,860 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:41:23,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-11-05 16:41:26,340 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105164126317758
2018-11-05 16:41:26,368 [salt.minion      :1432][INFO    ][20736] Starting a new job with PID 20736
2018-11-05 16:41:26,397 [salt.minion      :1711][INFO    ][20736] Returning information for job: 20181105164126317758
2018-11-05 16:41:28,633 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:41:28,687 [salt.state       :300 ][INFO    ][20100] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-11-05 16:41:28,714 [salt.state       :915 ][INFO    ][20100] Loading fresh modules for state activity
2018-11-05 16:41:28,766 [salt.state       :1951][INFO    ][20100] Completed state [haproxy] at time 16:41:28.766405 duration_in_ms=8098.075
2018-11-05 16:41:28,773 [salt.state       :1780][INFO    ][20100] Running state [/etc/default/haproxy] at time 16:41:28.773356
2018-11-05 16:41:28,773 [salt.state       :1813][INFO    ][20100] Executing state file.managed for [/etc/default/haproxy]
2018-11-05 16:41:28,822 [salt.fileclient  :1219][INFO    ][20100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-11-05 16:41:28,827 [salt.state       :300 ][INFO    ][20100] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-11-05 16:41:28,828 [salt.state       :1951][INFO    ][20100] Completed state [/etc/default/haproxy] at time 16:41:28.828170 duration_in_ms=54.814
2018-11-05 16:41:28,828 [salt.state       :1780][INFO    ][20100] Running state [/etc/haproxy/haproxy.cfg] at time 16:41:28.828549
2018-11-05 16:41:28,828 [salt.state       :1813][INFO    ][20100] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-11-05 16:41:28,851 [salt.fileclient  :1219][INFO    ][20100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-11-05 16:41:29,095 [salt.state       :300 ][INFO    ][20100] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-11-05 16:41:29,096 [salt.state       :1951][INFO    ][20100] Completed state [/etc/haproxy/haproxy.cfg] at time 16:41:29.096044 duration_in_ms=267.495
2018-11-05 16:41:29,096 [salt.state       :1780][INFO    ][20100] Running state [/etc/haproxy/ssl] at time 16:41:29.096422
2018-11-05 16:41:29,096 [salt.state       :1813][INFO    ][20100] Executing state file.directory for [/etc/haproxy/ssl]
2018-11-05 16:41:29,100 [salt.state       :300 ][INFO    ][20100] {'/etc/haproxy/ssl': 'New Dir'}
2018-11-05 16:41:29,100 [salt.state       :1951][INFO    ][20100] Completed state [/etc/haproxy/ssl] at time 16:41:29.100608 duration_in_ms=4.185
2018-11-05 16:41:29,100 [salt.state       :1780][INFO    ][20100] Running state [/etc/haproxy/errors/429.http11] at time 16:41:29.100942
2018-11-05 16:41:29,101 [salt.state       :1813][INFO    ][20100] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-11-05 16:41:29,132 [salt.fileclient  :1219][INFO    ][20100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-11-05 16:41:29,146 [salt.state       :300 ][INFO    ][20100] File changed:
New file
2018-11-05 16:41:29,147 [salt.state       :1951][INFO    ][20100] Completed state [/etc/haproxy/errors/429.http11] at time 16:41:29.147078 duration_in_ms=46.136
2018-11-05 16:41:29,148 [salt.state       :1780][INFO    ][20100] Running state [haproxy_status_packages] at time 16:41:29.148504
2018-11-05 16:41:29,149 [salt.state       :1813][INFO    ][20100] Executing state pkg.installed for [haproxy_status_packages]
2018-11-05 16:41:30,099 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 16:41:30,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-11-05 16:41:32,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 16:41:32,655 [salt.state       :300 ][INFO    ][20100] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-11-05 16:41:32,676 [salt.state       :915 ][INFO    ][20100] Loading fresh modules for state activity
2018-11-05 16:41:32,722 [salt.state       :1951][INFO    ][20100] Completed state [haproxy_status_packages] at time 16:41:32.722425 duration_in_ms=3573.921
2018-11-05 16:41:32,729 [salt.state       :1780][INFO    ][20100] Running state [/usr/bin/haproxy-status.sh] at time 16:41:32.729212
2018-11-05 16:41:32,729 [salt.state       :1813][INFO    ][20100] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-11-05 16:41:32,757 [salt.fileclient  :1219][INFO    ][20100] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-11-05 16:41:32,795 [salt.state       :300 ][INFO    ][20100] File changed:
New file
2018-11-05 16:41:32,796 [salt.state       :1951][INFO    ][20100] Completed state [/usr/bin/haproxy-status.sh] at time 16:41:32.796909 duration_in_ms=67.697
2018-11-05 16:41:32,800 [salt.state       :1780][INFO    ][20100] Running state [net.ipv4.ip_nonlocal_bind] at time 16:41:32.800626
2018-11-05 16:41:32,801 [salt.state       :1813][INFO    ][20100] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-11-05 16:41:32,804 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-11-05 16:41:32,821 [salt.state       :300 ][INFO    ][20100] {'net.ipv4.ip_nonlocal_bind': 1}
2018-11-05 16:41:32,822 [salt.state       :1951][INFO    ][20100] Completed state [net.ipv4.ip_nonlocal_bind] at time 16:41:32.822781 duration_in_ms=22.155
2018-11-05 16:41:33,469 [salt.state       :1780][INFO    ][20100] Running state [haproxy] at time 16:41:33.469423
2018-11-05 16:41:33,470 [salt.state       :1813][INFO    ][20100] Executing state service.running for [haproxy]
2018-11-05 16:41:33,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-11-05 16:41:33,493 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-05 16:41:33,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-11-05 16:41:33,528 [salt.state       :300 ][INFO    ][20100] The service haproxy is already running
2018-11-05 16:41:33,529 [salt.state       :1951][INFO    ][20100] Completed state [haproxy] at time 16:41:33.528962 duration_in_ms=59.54
2018-11-05 16:41:33,529 [salt.state       :1780][INFO    ][20100] Running state [haproxy] at time 16:41:33.529802
2018-11-05 16:41:33,530 [salt.state       :1813][INFO    ][20100] Executing state service.mod_watch for [haproxy]
2018-11-05 16:41:33,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-05 16:41:33,547 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20100] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-11-05 16:41:33,584 [salt.state       :300 ][INFO    ][20100] {'haproxy': True}
2018-11-05 16:41:33,584 [salt.state       :1951][INFO    ][20100] Completed state [haproxy] at time 16:41:33.584830 duration_in_ms=55.027
2018-11-05 16:41:33,591 [salt.minion      :1711][INFO    ][20100] Returning information for job: 20181105164109899649
2018-11-05 16:41:34,744 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command service.status with jid 20181105164134726469
2018-11-05 16:41:34,768 [salt.minion      :1432][INFO    ][21300] Starting a new job with PID 21300
2018-11-05 16:41:35,379 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][21300] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-11-05 16:41:35,400 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][21300] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-11-05 16:41:35,421 [salt.minion      :1711][INFO    ][21300] Returning information for job: 20181105164134726469
2018-11-05 16:41:36,491 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command service.restart with jid 20181105164136472692
2018-11-05 16:41:36,520 [salt.minion      :1432][INFO    ][21310] Starting a new job with PID 21310
2018-11-05 16:41:37,125 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][21310] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-11-05 16:41:37,174 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][21310] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-11-05 16:41:37,220 [salt.minion      :1711][INFO    ][21310] Returning information for job: 20181105164136472692
2018-11-05 17:11:41,030 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105171141014087
2018-11-05 17:11:41,057 [salt.minion      :1432][INFO    ][21435] Starting a new job with PID 21435
2018-11-05 17:11:42,055 [salt.state       :915 ][INFO    ][21435] Loading fresh modules for state activity
2018-11-05 17:11:42,122 [salt.fileclient  :1219][INFO    ][21435] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-11-05 17:11:42,160 [salt.fileclient  :1219][INFO    ][21435] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-11-05 17:11:42,195 [salt.fileclient  :1219][INFO    ][21435] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-11-05 17:11:42,248 [salt.fileclient  :1219][INFO    ][21435] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-11-05 17:11:43,259 [salt.state       :1780][INFO    ][21435] Running state [redis-server] at time 17:11:43.259488
2018-11-05 17:11:43,260 [salt.state       :1813][INFO    ][21435] Executing state pkg.installed for [redis-server]
2018-11-05 17:11:43,261 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:11:43,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-11-05 17:11:44,007 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 17:11:46,132 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171146116339
2018-11-05 17:11:46,153 [salt.minion      :1432][INFO    ][21793] Starting a new job with PID 21793
2018-11-05 17:11:46,179 [salt.minion      :1711][INFO    ][21793] Returning information for job: 20181105171146116339
2018-11-05 17:11:49,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:11:49,177 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-11-05 17:11:54,271 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:11:54,330 [salt.state       :300 ][INFO    ][21435] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-11-05 17:11:54,359 [salt.state       :915 ][INFO    ][21435] Loading fresh modules for state activity
2018-11-05 17:11:54,414 [salt.state       :1951][INFO    ][21435] Completed state [redis-server] at time 17:11:54.414774 duration_in_ms=11155.286
2018-11-05 17:11:54,421 [salt.state       :1780][INFO    ][21435] Running state [vm.overcommit_memory] at time 17:11:54.421638
2018-11-05 17:11:54,421 [salt.state       :1813][INFO    ][21435] Executing state sysctl.present for [vm.overcommit_memory]
2018-11-05 17:11:54,425 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-11-05 17:11:54,442 [salt.state       :300 ][INFO    ][21435] {'vm.overcommit_memory': 1}
2018-11-05 17:11:54,443 [salt.state       :1951][INFO    ][21435] Completed state [vm.overcommit_memory] at time 17:11:54.443272 duration_in_ms=21.634
2018-11-05 17:11:54,448 [salt.state       :1780][INFO    ][21435] Running state [/etc/redis/redis.conf] at time 17:11:54.448243
2018-11-05 17:11:54,448 [salt.state       :1813][INFO    ][21435] Executing state file.managed for [/etc/redis/redis.conf]
2018-11-05 17:11:54,490 [salt.fileclient  :1219][INFO    ][21435] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-11-05 17:11:54,570 [salt.state       :300 ][INFO    ][21435] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-11-05 17:11:54,570 [salt.state       :1951][INFO    ][21435] Completed state [/etc/redis/redis.conf] at time 17:11:54.570390 duration_in_ms=122.146
2018-11-05 17:11:55,195 [salt.state       :1780][INFO    ][21435] Running state [redis-server] at time 17:11:55.194953
2018-11-05 17:11:55,195 [salt.state       :1813][INFO    ][21435] Executing state service.running for [redis-server]
2018-11-05 17:11:55,197 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-11-05 17:11:55,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-11-05 17:11:55,265 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-11-05 17:11:55,291 [salt.state       :300 ][INFO    ][21435] The service redis-server is already running
2018-11-05 17:11:55,293 [salt.state       :1951][INFO    ][21435] Completed state [redis-server] at time 17:11:55.293390 duration_in_ms=98.437
2018-11-05 17:11:55,294 [salt.state       :1780][INFO    ][21435] Running state [redis-server] at time 17:11:55.294596
2018-11-05 17:11:55,295 [salt.state       :1813][INFO    ][21435] Executing state service.mod_watch for [redis-server]
2018-11-05 17:11:55,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-11-05 17:11:55,320 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-11-05 17:11:55,623 [salt.state       :300 ][INFO    ][21435] {'redis-server': True}
2018-11-05 17:11:55,624 [salt.state       :1951][INFO    ][21435] Completed state [redis-server] at time 17:11:55.623857 duration_in_ms=329.26
2018-11-05 17:11:55,630 [salt.state       :1780][INFO    ][21435] Running state [redis-sentinel] at time 17:11:55.630128
2018-11-05 17:11:55,630 [salt.state       :1813][INFO    ][21435] Executing state pkg.installed for [redis-sentinel]
2018-11-05 17:11:55,955 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:11:55,993 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-11-05 17:11:56,307 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171156292191
2018-11-05 17:11:56,330 [salt.minion      :1432][INFO    ][22422] Starting a new job with PID 22422
2018-11-05 17:11:56,351 [salt.minion      :1711][INFO    ][22422] Returning information for job: 20181105171156292191
2018-11-05 17:12:00,148 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:12:00,214 [salt.state       :300 ][INFO    ][21435] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-11-05 17:12:00,249 [salt.state       :915 ][INFO    ][21435] Loading fresh modules for state activity
2018-11-05 17:12:00,300 [salt.state       :1951][INFO    ][21435] Completed state [redis-sentinel] at time 17:12:00.300340 duration_in_ms=4670.211
2018-11-05 17:12:01,037 [salt.state       :1780][INFO    ][21435] Running state [/etc/redis/sentinel.conf] at time 17:12:01.037715
2018-11-05 17:12:01,040 [salt.state       :1813][INFO    ][21435] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-11-05 17:12:01,064 [salt.fileclient  :1219][INFO    ][21435] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-11-05 17:12:01,120 [salt.state       :300 ][INFO    ][21435] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-11-05 17:12:01,122 [salt.state       :1951][INFO    ][21435] Completed state [/etc/redis/sentinel.conf] at time 17:12:01.122565 duration_in_ms=84.849
2018-11-05 17:12:01,123 [salt.state       :1780][INFO    ][21435] Running state [redis-sentinel] at time 17:12:01.123569
2018-11-05 17:12:01,124 [salt.state       :1813][INFO    ][21435] Executing state service.running for [redis-sentinel]
2018-11-05 17:12:01,126 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-11-05 17:12:01,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-11-05 17:12:01,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-11-05 17:12:01,210 [salt.state       :300 ][INFO    ][21435] The service redis-sentinel is already running
2018-11-05 17:12:01,211 [salt.state       :1951][INFO    ][21435] Completed state [redis-sentinel] at time 17:12:01.211327 duration_in_ms=87.757
2018-11-05 17:12:01,212 [salt.state       :1780][INFO    ][21435] Running state [redis-sentinel] at time 17:12:01.212020
2018-11-05 17:12:01,213 [salt.state       :1813][INFO    ][21435] Executing state service.mod_watch for [redis-sentinel]
2018-11-05 17:12:01,214 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-11-05 17:12:01,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][21435] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-11-05 17:12:01,567 [salt.state       :300 ][INFO    ][21435] {'redis-sentinel': True}
2018-11-05 17:12:01,568 [salt.state       :1951][INFO    ][21435] Completed state [redis-sentinel] at time 17:12:01.568632 duration_in_ms=356.612
2018-11-05 17:12:01,574 [salt.minion      :1711][INFO    ][21435] Returning information for job: 20181105171141014087
2018-11-05 17:12:02,258 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105171202239752
2018-11-05 17:12:02,279 [salt.minion      :1432][INFO    ][22775] Starting a new job with PID 22775
2018-11-05 17:12:07,353 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171207334128
2018-11-05 17:12:07,378 [salt.minion      :1432][INFO    ][22780] Starting a new job with PID 22780
2018-11-05 17:12:07,401 [salt.minion      :1711][INFO    ][22780] Returning information for job: 20181105171207334128
2018-11-05 17:12:09,351 [salt.state       :915 ][INFO    ][22775] Loading fresh modules for state activity
2018-11-05 17:12:10,493 [salt.state       :1780][INFO    ][22775] Running state [redis-server] at time 17:12:10.493576
2018-11-05 17:12:10,494 [salt.state       :1813][INFO    ][22775] Executing state pkg.installed for [redis-server]
2018-11-05 17:12:10,495 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:12:11,047 [salt.state       :300 ][INFO    ][22775] All specified packages are already installed
2018-11-05 17:12:11,048 [salt.state       :1951][INFO    ][22775] Completed state [redis-server] at time 17:12:11.047850 duration_in_ms=554.275
2018-11-05 17:12:11,050 [salt.state       :1780][INFO    ][22775] Running state [vm.overcommit_memory] at time 17:12:11.050676
2018-11-05 17:12:11,051 [salt.state       :1813][INFO    ][22775] Executing state sysctl.present for [vm.overcommit_memory]
2018-11-05 17:12:11,074 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-11-05 17:12:11,094 [salt.state       :300 ][INFO    ][22775] Sysctl value vm.overcommit_memory = 1 is already set
2018-11-05 17:12:11,095 [salt.state       :1951][INFO    ][22775] Completed state [vm.overcommit_memory] at time 17:12:11.095692 duration_in_ms=45.016
2018-11-05 17:12:11,104 [salt.state       :1780][INFO    ][22775] Running state [/etc/redis/redis.conf] at time 17:12:11.104393
2018-11-05 17:12:11,105 [salt.state       :1813][INFO    ][22775] Executing state file.managed for [/etc/redis/redis.conf]
2018-11-05 17:12:11,197 [salt.state       :300 ][INFO    ][22775] File /etc/redis/redis.conf is in the correct state
2018-11-05 17:12:11,198 [salt.state       :1951][INFO    ][22775] Completed state [/etc/redis/redis.conf] at time 17:12:11.197944 duration_in_ms=93.532
2018-11-05 17:12:11,199 [salt.state       :1780][INFO    ][22775] Running state [redis-server] at time 17:12:11.199224
2018-11-05 17:12:11,199 [salt.state       :1813][INFO    ][22775] Executing state service.running for [redis-server]
2018-11-05 17:12:11,200 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-11-05 17:12:11,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-11-05 17:12:11,260 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-11-05 17:12:11,281 [salt.state       :300 ][INFO    ][22775] The service redis-server is already running
2018-11-05 17:12:11,282 [salt.state       :1951][INFO    ][22775] Completed state [redis-server] at time 17:12:11.282676 duration_in_ms=83.45
2018-11-05 17:12:11,283 [salt.state       :1780][INFO    ][22775] Running state [redis-sentinel] at time 17:12:11.283721
2018-11-05 17:12:11,284 [salt.state       :1813][INFO    ][22775] Executing state pkg.installed for [redis-sentinel]
2018-11-05 17:12:11,302 [salt.state       :300 ][INFO    ][22775] All specified packages are already installed
2018-11-05 17:12:11,302 [salt.state       :1951][INFO    ][22775] Completed state [redis-sentinel] at time 17:12:11.302893 duration_in_ms=19.173
2018-11-05 17:12:11,304 [salt.state       :1780][INFO    ][22775] Running state [/etc/redis/sentinel.conf] at time 17:12:11.304557
2018-11-05 17:12:11,305 [salt.state       :1813][INFO    ][22775] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-11-05 17:12:11,362 [salt.state       :300 ][INFO    ][22775] File /etc/redis/sentinel.conf is in the correct state
2018-11-05 17:12:11,363 [salt.state       :1951][INFO    ][22775] Completed state [/etc/redis/sentinel.conf] at time 17:12:11.363645 duration_in_ms=59.088
2018-11-05 17:12:11,364 [salt.state       :1780][INFO    ][22775] Running state [redis-sentinel] at time 17:12:11.364248
2018-11-05 17:12:11,365 [salt.state       :1813][INFO    ][22775] Executing state service.running for [redis-sentinel]
2018-11-05 17:12:11,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-11-05 17:12:11,393 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-11-05 17:12:11,415 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22775] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-11-05 17:12:11,436 [salt.state       :300 ][INFO    ][22775] The service redis-sentinel is already running
2018-11-05 17:12:11,437 [salt.state       :1951][INFO    ][22775] Completed state [redis-sentinel] at time 17:12:11.437693 duration_in_ms=73.444
2018-11-05 17:12:11,443 [salt.minion      :1711][INFO    ][22775] Returning information for job: 20181105171202239752
2018-11-05 17:12:28,497 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command test.ping with jid 20181105171228480769
2018-11-05 17:12:28,520 [salt.minion      :1432][INFO    ][22818] Starting a new job with PID 22818
2018-11-05 17:12:28,549 [salt.minion      :1711][INFO    ][22818] Returning information for job: 20181105171228480769
2018-11-05 17:12:28,676 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105171228656984
2018-11-05 17:12:28,697 [salt.minion      :1432][INFO    ][22823] Starting a new job with PID 22823
2018-11-05 17:12:33,791 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171233773918
2018-11-05 17:12:33,822 [salt.minion      :1432][INFO    ][22828] Starting a new job with PID 22828
2018-11-05 17:12:33,848 [salt.minion      :1711][INFO    ][22828] Returning information for job: 20181105171233773918
2018-11-05 17:12:34,938 [salt.state       :915 ][INFO    ][22823] Loading fresh modules for state activity
2018-11-05 17:12:35,006 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-11-05 17:12:35,053 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-11-05 17:12:35,143 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-11-05 17:12:35,178 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-11-05 17:12:35,218 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-11-05 17:12:35,337 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-11-05 17:12:35,440 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-11-05 17:12:35,589 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-11-05 17:12:35,761 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-11-05 17:12:35,852 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-11-05 17:12:35,950 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-11-05 17:12:36,017 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-11-05 17:12:36,984 [salt.state       :1780][INFO    ][22823] Running state [apache2] at time 17:12:36.984795
2018-11-05 17:12:36,985 [salt.state       :1813][INFO    ][22823] Executing state pkg.installed for [apache2]
2018-11-05 17:12:36,986 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:12:37,533 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-11-05 17:12:37,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 17:12:40,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:12:40,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-11-05 17:12:43,919 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171243902329
2018-11-05 17:12:43,944 [salt.minion      :1432][INFO    ][23836] Starting a new job with PID 23836
2018-11-05 17:12:43,978 [salt.minion      :1711][INFO    ][23836] Returning information for job: 20181105171243902329
2018-11-05 17:12:49,703 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:12:49,752 [salt.state       :300 ][INFO    ][22823] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-11-05 17:12:49,787 [salt.state       :915 ][INFO    ][22823] Loading fresh modules for state activity
2018-11-05 17:12:49,898 [salt.state       :1951][INFO    ][22823] Completed state [apache2] at time 17:12:49.898241 duration_in_ms=12913.447
2018-11-05 17:12:49,906 [salt.state       :1780][INFO    ][22823] Running state [openssl] at time 17:12:49.905994
2018-11-05 17:12:49,906 [salt.state       :1813][INFO    ][22823] Executing state pkg.installed for [openssl]
2018-11-05 17:12:50,890 [salt.state       :300 ][INFO    ][22823] All specified packages are already installed
2018-11-05 17:12:50,891 [salt.state       :1951][INFO    ][22823] Completed state [openssl] at time 17:12:50.891763 duration_in_ms=985.768
2018-11-05 17:12:50,894 [salt.state       :1780][INFO    ][22823] Running state [a2enmod rewrite] at time 17:12:50.894752
2018-11-05 17:12:50,895 [salt.state       :1813][INFO    ][22823] Executing state cmd.run for [a2enmod rewrite]
2018-11-05 17:12:50,897 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command 'a2enmod rewrite' in directory '/root'
2018-11-05 17:12:50,978 [salt.state       :300 ][INFO    ][22823] {'pid': 24361, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-11-05 17:12:50,979 [salt.state       :1951][INFO    ][22823] Completed state [a2enmod rewrite] at time 17:12:50.979688 duration_in_ms=84.935
2018-11-05 17:12:50,982 [salt.state       :1780][INFO    ][22823] Running state [libapache2-mod-wsgi] at time 17:12:50.982233
2018-11-05 17:12:50,983 [salt.state       :1813][INFO    ][22823] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-05 17:12:51,021 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:12:51,062 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-11-05 17:12:54,061 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171254043823
2018-11-05 17:12:54,088 [salt.minion      :1432][INFO    ][24549] Starting a new job with PID 24549
2018-11-05 17:12:54,164 [salt.minion      :1711][INFO    ][24549] Returning information for job: 20181105171254043823
2018-11-05 17:12:56,579 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:12:56,637 [salt.state       :300 ][INFO    ][22823] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-11-05 17:12:56,668 [salt.state       :915 ][INFO    ][22823] Loading fresh modules for state activity
2018-11-05 17:12:56,719 [salt.state       :1951][INFO    ][22823] Completed state [libapache2-mod-wsgi] at time 17:12:56.719442 duration_in_ms=5737.209
2018-11-05 17:12:56,723 [salt.state       :1780][INFO    ][22823] Running state [a2enmod wsgi] at time 17:12:56.723045
2018-11-05 17:12:56,723 [salt.state       :1813][INFO    ][22823] Executing state cmd.run for [a2enmod wsgi]
2018-11-05 17:12:56,723 [salt.state       :300 ][INFO    ][22823] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-05 17:12:56,724 [salt.state       :1951][INFO    ][22823] Completed state [a2enmod wsgi] at time 17:12:56.723994 duration_in_ms=0.949
2018-11-05 17:12:56,728 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:12:56.728822
2018-11-05 17:12:56,729 [salt.state       :1813][INFO    ][22823] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-05 17:12:56,764 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-11-05 17:12:56,839 [salt.state       :300 ][INFO    ][22823] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-11-05 17:12:56,839 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:12:56.839753 duration_in_ms=110.93
2018-11-05 17:12:56,840 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:12:56.840378
2018-11-05 17:12:56,840 [salt.state       :1813][INFO    ][22823] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-05 17:12:56,841 [salt.state       :300 ][INFO    ][22823] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-05 17:12:56,841 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:12:56.841536 duration_in_ms=1.158
2018-11-05 17:12:56,841 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:12:56.841772
2018-11-05 17:12:56,842 [salt.state       :1813][INFO    ][22823] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-05 17:12:56,842 [salt.state       :300 ][INFO    ][22823] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-11-05 17:12:56,842 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:12:56.842553 duration_in_ms=0.781
2018-11-05 17:12:56,844 [salt.state       :1780][INFO    ][22823] Running state [a2enmod mpm_prefork] at time 17:12:56.844286
2018-11-05 17:12:56,844 [salt.state       :1813][INFO    ][22823] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-05 17:12:56,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-11-05 17:12:56,922 [salt.state       :300 ][INFO    ][22823] {'pid': 24683, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-11-05 17:12:56,923 [salt.state       :1951][INFO    ][22823] Completed state [a2enmod mpm_prefork] at time 17:12:56.922959 duration_in_ms=78.672
2018-11-05 17:12:56,923 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:12:56.923488
2018-11-05 17:12:56,923 [salt.state       :1813][INFO    ][22823] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-05 17:12:56,925 [salt.state       :300 ][INFO    ][22823] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-05 17:12:56,926 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:12:56.925991 duration_in_ms=2.503
2018-11-05 17:12:56,926 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:12:56.926319
2018-11-05 17:12:56,926 [salt.state       :1813][INFO    ][22823] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-05 17:12:56,927 [salt.state       :300 ][INFO    ][22823] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-11-05 17:12:56,927 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:12:56.927846 duration_in_ms=1.527
2018-11-05 17:12:56,930 [salt.state       :1780][INFO    ][22823] Running state [apache_server_service_task] at time 17:12:56.930070
2018-11-05 17:12:56,930 [salt.state       :1813][INFO    ][22823] Executing state test.show_notification for [apache_server_service_task]
2018-11-05 17:12:56,930 [salt.state       :300 ][INFO    ][22823] Running apache.server.service
2018-11-05 17:12:56,930 [salt.state       :1951][INFO    ][22823] Completed state [apache_server_service_task] at time 17:12:56.930826 duration_in_ms=0.756
2018-11-05 17:12:56,931 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/ports.conf] at time 17:12:56.931466
2018-11-05 17:12:56,931 [salt.state       :1813][INFO    ][22823] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-05 17:12:56,949 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-11-05 17:12:57,020 [salt.state       :300 ][INFO    ][22823] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-11-05 17:12:57,020 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/ports.conf] at time 17:12:57.020591 duration_in_ms=89.125
2018-11-05 17:12:57,021 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/conf-available/security.conf] at time 17:12:57.021122
2018-11-05 17:12:57,021 [salt.state       :1813][INFO    ][22823] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-05 17:12:57,038 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-11-05 17:12:57,112 [salt.state       :300 ][INFO    ][22823] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-11-05 17:12:57,112 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/conf-available/security.conf] at time 17:12:57.112480 duration_in_ms=91.358
2018-11-05 17:12:57,788 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 17:12:57.788844
2018-11-05 17:12:57,789 [salt.state       :1813][INFO    ][22823] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-05 17:12:57,789 [salt.state       :300 ][INFO    ][22823] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-11-05 17:12:57,790 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 17:12:57.790118 duration_in_ms=1.274
2018-11-05 17:12:57,791 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:12:57.790982
2018-11-05 17:12:57,792 [salt.state       :1813][INFO    ][22823] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-05 17:12:57,817 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-11-05 17:12:57,860 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-11-05 17:12:57,944 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-11-05 17:12:57,973 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-11-05 17:12:58,080 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-11-05 17:12:58,108 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-11-05 17:12:58,135 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-11-05 17:12:58,154 [salt.state       :300 ][INFO    ][22823] File changed:
New file
2018-11-05 17:12:58,155 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:12:58.155484 duration_in_ms=364.501
2018-11-05 17:12:58,156 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:12:58.156275
2018-11-05 17:12:58,156 [salt.state       :1813][INFO    ][22823] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-05 17:12:58,445 [salt.state       :300 ][INFO    ][22823] File changed:
New file
2018-11-05 17:12:58,446 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:12:58.446078 duration_in_ms=289.803
2018-11-05 17:12:58,449 [salt.state       :1780][INFO    ][22823] Running state [apache2] at time 17:12:58.449328
2018-11-05 17:12:58,450 [salt.state       :1813][INFO    ][22823] Executing state service.running for [apache2]
2018-11-05 17:12:58,451 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-05 17:12:58,481 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:12:58,506 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:12:58,531 [salt.state       :300 ][INFO    ][22823] The service apache2 is already running
2018-11-05 17:12:58,531 [salt.state       :1951][INFO    ][22823] Completed state [apache2] at time 17:12:58.531723 duration_in_ms=82.395
2018-11-05 17:12:58,532 [salt.state       :1780][INFO    ][22823] Running state [apache2] at time 17:12:58.532055
2018-11-05 17:12:58,532 [salt.state       :1813][INFO    ][22823] Executing state service.mod_watch for [apache2]
2018-11-05 17:12:58,535 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:12:58,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-11-05 17:12:58,786 [salt.state       :300 ][INFO    ][22823] {'apache2': True}
2018-11-05 17:12:58,787 [salt.state       :1951][INFO    ][22823] Completed state [apache2] at time 17:12:58.787246 duration_in_ms=255.19
2018-11-05 17:12:58,789 [salt.state       :1780][INFO    ][22823] Running state [/etc/apache2/conf-enabled/security.conf] at time 17:12:58.789401
2018-11-05 17:12:58,790 [salt.state       :1813][INFO    ][22823] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-05 17:12:58,801 [salt.state       :300 ][INFO    ][22823] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-11-05 17:12:58,801 [salt.state       :1951][INFO    ][22823] Completed state [/etc/apache2/conf-enabled/security.conf] at time 17:12:58.801534 duration_in_ms=12.133
2018-11-05 17:12:58,804 [salt.state       :1780][INFO    ][22823] Running state [gnocchi-common] at time 17:12:58.804541
2018-11-05 17:12:58,805 [salt.state       :1813][INFO    ][22823] Executing state pkg.installed for [gnocchi-common]
2018-11-05 17:12:59,122 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:12:59,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-11-05 17:13:04,252 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171304236926
2018-11-05 17:13:04,279 [salt.minion      :1432][INFO    ][25060] Starting a new job with PID 25060
2018-11-05 17:13:04,307 [salt.minion      :1711][INFO    ][25060] Returning information for job: 20181105171304236926
2018-11-05 17:13:14,396 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171314375638
2018-11-05 17:13:14,423 [salt.minion      :1432][INFO    ][25994] Starting a new job with PID 25994
2018-11-05 17:13:14,455 [salt.minion      :1711][INFO    ][25994] Returning information for job: 20181105171314375638
2018-11-05 17:13:24,536 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171324519384
2018-11-05 17:13:24,568 [salt.minion      :1432][INFO    ][27009] Starting a new job with PID 27009
2018-11-05 17:13:24,595 [salt.minion      :1711][INFO    ][27009] Returning information for job: 20181105171324519384
2018-11-05 17:13:34,695 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171334679882
2018-11-05 17:13:34,716 [salt.minion      :1432][INFO    ][27454] Starting a new job with PID 27454
2018-11-05 17:13:34,744 [salt.minion      :1711][INFO    ][27454] Returning information for job: 20181105171334679882
2018-11-05 17:13:44,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:13:44,257 [salt.state       :300 ][INFO    ][22823] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp6'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-1.0~u16.04+mcp17'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp12'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-11-05 17:13:44,295 [salt.state       :915 ][INFO    ][22823] Loading fresh modules for state activity
2018-11-05 17:13:44,352 [salt.state       :1951][INFO    ][22823] Completed state [gnocchi-common] at time 17:13:44.351986 duration_in_ms=45547.444
2018-11-05 17:13:44,356 [salt.state       :1780][INFO    ][22823] Running state [gnocchi_ssl_mysql] at time 17:13:44.355970
2018-11-05 17:13:44,356 [salt.state       :1813][INFO    ][22823] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-11-05 17:13:44,356 [salt.state       :300 ][INFO    ][22823] Running gnocchi._ssl.mysql
2018-11-05 17:13:44,357 [salt.state       :1951][INFO    ][22823] Completed state [gnocchi_ssl_mysql] at time 17:13:44.357010 duration_in_ms=1.04
2018-11-05 17:13:44,359 [salt.state       :1780][INFO    ][22823] Running state [/etc/gnocchi/gnocchi.conf] at time 17:13:44.359617
2018-11-05 17:13:44,359 [salt.state       :1813][INFO    ][22823] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-11-05 17:13:44,388 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-11-05 17:13:44,501 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-11-05 17:13:44,522 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-11-05 17:13:44,560 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-11-05 17:13:44,604 [salt.fileclient  :1219][INFO    ][22823] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-11-05 17:13:44,615 [salt.state       :300 ][INFO    ][22823] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.32:6379

2018-11-05 17:13:44,616 [salt.state       :1951][INFO    ][22823] Completed state [/etc/gnocchi/gnocchi.conf] at time 17:13:44.616059 duration_in_ms=256.44
2018-11-05 17:13:44,622 [salt.state       :1780][INFO    ][22823] Running state [gnocchi-api] at time 17:13:44.622819
2018-11-05 17:13:44,623 [salt.state       :1813][INFO    ][22823] Executing state pkg.installed for [gnocchi-api]
2018-11-05 17:13:45,278 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171344813055
2018-11-05 17:13:45,307 [salt.minion      :1432][INFO    ][27918] Starting a new job with PID 27918
2018-11-05 17:13:45,334 [salt.minion      :1711][INFO    ][27918] Returning information for job: 20181105171344813055
2018-11-05 17:13:46,488 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:13:46,527 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-11-05 17:13:54,980 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171354962605
2018-11-05 17:13:54,998 [salt.minion      :1432][INFO    ][28749] Starting a new job with PID 28749
2018-11-05 17:13:55,023 [salt.minion      :1711][INFO    ][28749] Returning information for job: 20181105171354962605
2018-11-05 17:13:56,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:13:56,985 [salt.state       :300 ][INFO    ][22823] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp20'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-11-05 17:13:57,028 [salt.state       :915 ][INFO    ][22823] Loading fresh modules for state activity
2018-11-05 17:13:57,086 [salt.state       :1951][INFO    ][22823] Completed state [gnocchi-api] at time 17:13:57.086211 duration_in_ms=12463.392
2018-11-05 17:13:57,094 [salt.state       :1780][INFO    ][22823] Running state [gnocchi-metricd] at time 17:13:57.094164
2018-11-05 17:13:57,094 [salt.state       :1813][INFO    ][22823] Executing state pkg.installed for [gnocchi-metricd]
2018-11-05 17:13:58,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:13:58,578 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-11-05 17:14:02,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:14:02,307 [salt.state       :300 ][INFO    ][22823] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-11-05 17:14:02,353 [salt.state       :915 ][INFO    ][22823] Loading fresh modules for state activity
2018-11-05 17:14:02,616 [salt.state       :1951][INFO    ][22823] Completed state [gnocchi-metricd] at time 17:14:02.616655 duration_in_ms=5522.49
2018-11-05 17:14:02,628 [salt.state       :1780][INFO    ][22823] Running state [python-memcache] at time 17:14:02.627970
2018-11-05 17:14:02,628 [salt.state       :1813][INFO    ][22823] Executing state pkg.installed for [python-memcache]
2018-11-05 17:14:03,701 [salt.state       :300 ][INFO    ][22823] All specified packages are already installed
2018-11-05 17:14:03,702 [salt.state       :1951][INFO    ][22823] Completed state [python-memcache] at time 17:14:03.702039 duration_in_ms=1074.069
2018-11-05 17:14:03,704 [salt.state       :1780][INFO    ][22823] Running state [gnocchi-upgrade] at time 17:14:03.704674
2018-11-05 17:14:03,704 [salt.state       :1813][INFO    ][22823] Executing state cmd.run for [gnocchi-upgrade]
2018-11-05 17:14:03,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-11-05 17:14:05,111 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171405096028
2018-11-05 17:14:05,137 [salt.minion      :1432][INFO    ][29106] Starting a new job with PID 29106
2018-11-05 17:14:05,164 [salt.minion      :1711][INFO    ][29106] Returning information for job: 20181105171405096028
2018-11-05 17:14:06,682 [salt.state       :300 ][INFO    ][22823] {'pid': 29087, 'retcode': 0, 'stderr': '2018-11-05 17:14:05,503 [29095] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-11-05 17:14:05,997 [29095] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-11-05 17:14:06,516 [29095] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.32,port=6379,db=0>>>\n2018-11-05 17:14:06,519 [29095] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-11-05 17:14:06,683 [salt.state       :1951][INFO    ][22823] Completed state [gnocchi-upgrade] at time 17:14:06.683410 duration_in_ms=2978.736
2018-11-05 17:14:06,685 [salt.state       :1780][INFO    ][22823] Running state [wsgi_gnocchi] at time 17:14:06.685571
2018-11-05 17:14:06,685 [salt.state       :1813][INFO    ][22823] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-11-05 17:14:06,687 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-11-05 17:14:06,765 [salt.state       :300 ][INFO    ][22823] {'new': 'wsgi_gnocchi', 'old': None}
2018-11-05 17:14:06,766 [salt.state       :1951][INFO    ][22823] Completed state [wsgi_gnocchi] at time 17:14:06.766765 duration_in_ms=81.194
2018-11-05 17:14:06,769 [salt.state       :1780][INFO    ][22823] Running state [apache2] at time 17:14:06.769513
2018-11-05 17:14:06,769 [salt.state       :1813][INFO    ][22823] Executing state service.running for [apache2]
2018-11-05 17:14:06,771 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:14:06,798 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:14:06,827 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-11-05 17:14:08,076 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:14:08,106 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:14:08,143 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:14:08,179 [salt.state       :300 ][INFO    ][22823] {'apache2': True}
2018-11-05 17:14:08,179 [salt.state       :1951][INFO    ][22823] Completed state [apache2] at time 17:14:08.179654 duration_in_ms=1410.14
2018-11-05 17:14:08,181 [salt.state       :1780][INFO    ][22823] Running state [gnocchi-metricd] at time 17:14:08.181337
2018-11-05 17:14:08,181 [salt.state       :1813][INFO    ][22823] Executing state service.running for [gnocchi-metricd]
2018-11-05 17:14:08,182 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-11-05 17:14:08,224 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:08,258 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:08,307 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:08,376 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:08,424 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:08,467 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:08,519 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:09,285 [salt.loaded.int.module.cmdmod:395 ][INFO    ][22823] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-11-05 17:14:09,325 [salt.state       :300 ][INFO    ][22823] {'gnocchi-metricd': True}
2018-11-05 17:14:09,326 [salt.state       :1951][INFO    ][22823] Completed state [gnocchi-metricd] at time 17:14:09.326175 duration_in_ms=1144.838
2018-11-05 17:14:09,330 [salt.minion      :1711][INFO    ][22823] Returning information for job: 20181105171228656984
2018-11-05 17:17:18,268 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command test.ping with jid 20181105171718252199
2018-11-05 17:17:18,297 [salt.minion      :1432][INFO    ][29412] Starting a new job with PID 29412
2018-11-05 17:17:18,324 [salt.minion      :1711][INFO    ][29412] Returning information for job: 20181105171718252199
2018-11-05 17:17:18,493 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105171718472716
2018-11-05 17:17:18,516 [salt.minion      :1432][INFO    ][29417] Starting a new job with PID 29417
2018-11-05 17:17:23,614 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171723597348
2018-11-05 17:17:23,645 [salt.minion      :1432][INFO    ][29423] Starting a new job with PID 29423
2018-11-05 17:17:23,671 [salt.minion      :1711][INFO    ][29423] Returning information for job: 20181105171723597348
2018-11-05 17:17:24,773 [salt.state       :915 ][INFO    ][29417] Loading fresh modules for state activity
2018-11-05 17:17:24,845 [salt.fileclient  :1219][INFO    ][29417] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-11-05 17:17:24,889 [salt.fileclient  :1219][INFO    ][29417] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-11-05 17:17:25,735 [salt.fileclient  :1219][INFO    ][29417] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-11-05 17:17:28,016 [salt.state       :1780][INFO    ][29417] Running state [apache2] at time 17:17:28.016386
2018-11-05 17:17:28,016 [salt.state       :1813][INFO    ][29417] Executing state pkg.installed for [apache2]
2018-11-05 17:17:28,018 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:17:28,599 [salt.state       :300 ][INFO    ][29417] All specified packages are already installed
2018-11-05 17:17:28,600 [salt.state       :1951][INFO    ][29417] Completed state [apache2] at time 17:17:28.600214 duration_in_ms=583.826
2018-11-05 17:17:28,600 [salt.state       :1780][INFO    ][29417] Running state [openssl] at time 17:17:28.600614
2018-11-05 17:17:28,600 [salt.state       :1813][INFO    ][29417] Executing state pkg.installed for [openssl]
2018-11-05 17:17:28,612 [salt.state       :300 ][INFO    ][29417] All specified packages are already installed
2018-11-05 17:17:28,612 [salt.state       :1951][INFO    ][29417] Completed state [openssl] at time 17:17:28.612618 duration_in_ms=12.004
2018-11-05 17:17:28,613 [salt.state       :1780][INFO    ][29417] Running state [a2enmod rewrite] at time 17:17:28.613257
2018-11-05 17:17:28,613 [salt.state       :1813][INFO    ][29417] Executing state cmd.run for [a2enmod rewrite]
2018-11-05 17:17:28,614 [salt.state       :300 ][INFO    ][29417] /etc/apache2/mods-enabled/rewrite.load exists
2018-11-05 17:17:28,614 [salt.state       :1951][INFO    ][29417] Completed state [a2enmod rewrite] at time 17:17:28.614174 duration_in_ms=0.917
2018-11-05 17:17:28,614 [salt.state       :1780][INFO    ][29417] Running state [libapache2-mod-wsgi] at time 17:17:28.614620
2018-11-05 17:17:28,614 [salt.state       :1813][INFO    ][29417] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-05 17:17:28,627 [salt.state       :300 ][INFO    ][29417] All specified packages are already installed
2018-11-05 17:17:28,627 [salt.state       :1951][INFO    ][29417] Completed state [libapache2-mod-wsgi] at time 17:17:28.627563 duration_in_ms=12.942
2018-11-05 17:17:28,629 [salt.state       :1780][INFO    ][29417] Running state [a2enmod wsgi] at time 17:17:28.628660
2018-11-05 17:17:28,630 [salt.state       :1813][INFO    ][29417] Executing state cmd.run for [a2enmod wsgi]
2018-11-05 17:17:28,630 [salt.state       :300 ][INFO    ][29417] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-05 17:17:28,631 [salt.state       :1951][INFO    ][29417] Completed state [a2enmod wsgi] at time 17:17:28.631357 duration_in_ms=2.697
2018-11-05 17:17:28,639 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:17:28.639626
2018-11-05 17:17:28,640 [salt.state       :1813][INFO    ][29417] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-05 17:17:28,943 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-11-05 17:17:28,943 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:17:28.943468 duration_in_ms=303.841
2018-11-05 17:17:28,943 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:17:28.943713
2018-11-05 17:17:28,943 [salt.state       :1813][INFO    ][29417] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-05 17:17:28,944 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-05 17:17:28,944 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:17:28.944507 duration_in_ms=0.793
2018-11-05 17:17:28,944 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:17:28.944732
2018-11-05 17:17:28,944 [salt.state       :1813][INFO    ][29417] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-05 17:17:28,946 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-11-05 17:17:28,946 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:17:28.946431 duration_in_ms=1.699
2018-11-05 17:17:28,947 [salt.state       :1780][INFO    ][29417] Running state [a2enmod mpm_prefork] at time 17:17:28.947131
2018-11-05 17:17:28,947 [salt.state       :1813][INFO    ][29417] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-05 17:17:28,947 [salt.state       :300 ][INFO    ][29417] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-11-05 17:17:28,948 [salt.state       :1951][INFO    ][29417] Completed state [a2enmod mpm_prefork] at time 17:17:28.948277 duration_in_ms=1.146
2018-11-05 17:17:28,948 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:17:28.948509
2018-11-05 17:17:28,948 [salt.state       :1813][INFO    ][29417] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-05 17:17:28,949 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-05 17:17:28,950 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:17:28.950226 duration_in_ms=1.717
2018-11-05 17:17:28,950 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:17:28.950459
2018-11-05 17:17:28,950 [salt.state       :1813][INFO    ][29417] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-05 17:17:28,951 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-11-05 17:17:28,951 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:17:28.951166 duration_in_ms=0.707
2018-11-05 17:17:28,952 [salt.state       :1780][INFO    ][29417] Running state [apache_server_service_task] at time 17:17:28.951964
2018-11-05 17:17:28,952 [salt.state       :1813][INFO    ][29417] Executing state test.show_notification for [apache_server_service_task]
2018-11-05 17:17:28,952 [salt.state       :300 ][INFO    ][29417] Running apache.server.service
2018-11-05 17:17:28,952 [salt.state       :1951][INFO    ][29417] Completed state [apache_server_service_task] at time 17:17:28.952626 duration_in_ms=0.662
2018-11-05 17:17:28,953 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/ports.conf] at time 17:17:28.953058
2018-11-05 17:17:28,953 [salt.state       :1813][INFO    ][29417] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-05 17:17:29,035 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/ports.conf is in the correct state
2018-11-05 17:17:29,035 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/ports.conf] at time 17:17:29.035911 duration_in_ms=82.853
2018-11-05 17:17:29,036 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/conf-available/security.conf] at time 17:17:29.036347
2018-11-05 17:17:29,036 [salt.state       :1813][INFO    ][29417] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-05 17:17:29,120 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/conf-available/security.conf is in the correct state
2018-11-05 17:17:29,121 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/conf-available/security.conf] at time 17:17:29.121169 duration_in_ms=84.822
2018-11-05 17:17:29,128 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 17:17:29.128084
2018-11-05 17:17:29,128 [salt.state       :1813][INFO    ][29417] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-05 17:17:29,128 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-11-05 17:17:29,128 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 17:17:29.128848 duration_in_ms=0.764
2018-11-05 17:17:29,129 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:17:29.129663
2018-11-05 17:17:29,129 [salt.state       :1813][INFO    ][29417] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-05 17:17:29,430 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-11-05 17:17:29,431 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:17:29.431094 duration_in_ms=301.43
2018-11-05 17:17:29,431 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:17:29.431559
2018-11-05 17:17:29,431 [salt.state       :1813][INFO    ][29417] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-05 17:17:29,742 [salt.state       :300 ][INFO    ][29417] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-11-05 17:17:29,742 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:17:29.742915 duration_in_ms=311.355
2018-11-05 17:17:29,746 [salt.state       :1780][INFO    ][29417] Running state [apache2] at time 17:17:29.745918
2018-11-05 17:17:29,746 [salt.state       :1813][INFO    ][29417] Executing state service.running for [apache2]
2018-11-05 17:17:29,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-05 17:17:29,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:17:29,827 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:17:29,854 [salt.state       :300 ][INFO    ][29417] The service apache2 is already running
2018-11-05 17:17:29,855 [salt.state       :1951][INFO    ][29417] Completed state [apache2] at time 17:17:29.854950 duration_in_ms=109.026
2018-11-05 17:17:29,858 [salt.state       :1780][INFO    ][29417] Running state [/etc/apache2/conf-enabled/security.conf] at time 17:17:29.858198
2018-11-05 17:17:29,859 [salt.state       :1813][INFO    ][29417] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-05 17:17:29,863 [salt.state       :300 ][INFO    ][29417] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-11-05 17:17:29,864 [salt.state       :1951][INFO    ][29417] Completed state [/etc/apache2/conf-enabled/security.conf] at time 17:17:29.863947 duration_in_ms=5.748
2018-11-05 17:17:29,865 [salt.state       :1780][INFO    ][29417] Running state [panko-api] at time 17:17:29.865664
2018-11-05 17:17:29,866 [salt.state       :1813][INFO    ][29417] Executing state pkg.installed for [panko-api]
2018-11-05 17:17:29,898 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-11-05 17:17:30,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 17:17:32,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:17:32,716 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-11-05 17:17:33,662 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171733640854
2018-11-05 17:17:33,685 [salt.minion      :1432][INFO    ][29842] Starting a new job with PID 29842
2018-11-05 17:17:33,711 [salt.minion      :1711][INFO    ][29842] Returning information for job: 20181105171733640854
2018-11-05 17:17:36,905 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:17:36,970 [salt.state       :300 ][INFO    ][29417] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-11-05 17:17:37,015 [salt.state       :915 ][INFO    ][29417] Loading fresh modules for state activity
2018-11-05 17:17:37,066 [salt.state       :1951][INFO    ][29417] Completed state [panko-api] at time 17:17:37.066410 duration_in_ms=7200.746
2018-11-05 17:17:37,069 [salt.state       :1780][INFO    ][29417] Running state [panko_ssl_mysql] at time 17:17:37.069802
2018-11-05 17:17:37,070 [salt.state       :1813][INFO    ][29417] Executing state test.show_notification for [panko_ssl_mysql]
2018-11-05 17:17:37,070 [salt.state       :300 ][INFO    ][29417] Running panko._ssl.mysql
2018-11-05 17:17:37,071 [salt.state       :1951][INFO    ][29417] Completed state [panko_ssl_mysql] at time 17:17:37.071074 duration_in_ms=1.272
2018-11-05 17:17:37,074 [salt.state       :1780][INFO    ][29417] Running state [/etc/panko/panko.conf] at time 17:17:37.074221
2018-11-05 17:17:37,074 [salt.state       :1813][INFO    ][29417] Executing state file.managed for [/etc/panko/panko.conf]
2018-11-05 17:17:37,105 [salt.fileclient  :1219][INFO    ][29417] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-11-05 17:17:37,174 [salt.fileclient  :1219][INFO    ][29417] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-11-05 17:17:37,206 [salt.fileclient  :1219][INFO    ][29417] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-11-05 17:17:37,320 [salt.state       :300 ][INFO    ][29417] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -362,36 +377,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -466,110 +451,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-11-05 17:17:37,321 [salt.state       :1951][INFO    ][29417] Completed state [/etc/panko/panko.conf] at time 17:17:37.321770 duration_in_ms=247.548
2018-11-05 17:17:37,325 [salt.state       :1780][INFO    ][29417] Running state [/usr/bin/panko-expirer --use-syslog] at time 17:17:37.325632
2018-11-05 17:17:37,325 [salt.state       :1813][INFO    ][29417] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-11-05 17:17:37,330 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command 'crontab -u panko -l' in directory '/root'
2018-11-05 17:17:37,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command 'crontab -u panko /tmp/__salt.tmp.JBtsyr' in directory '/root'
2018-11-05 17:17:37,388 [salt.state       :300 ][INFO    ][29417] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-11-05 17:17:37,389 [salt.state       :1951][INFO    ][29417] Completed state [/usr/bin/panko-expirer --use-syslog] at time 17:17:37.389287 duration_in_ms=63.653
2018-11-05 17:17:37,397 [salt.state       :1780][INFO    ][29417] Running state [panko-dbsync] at time 17:17:37.397846
2018-11-05 17:17:37,404 [salt.state       :1813][INFO    ][29417] Executing state cmd.run for [panko-dbsync]
2018-11-05 17:17:37,405 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command 'panko-dbsync' in directory '/root'
2018-11-05 17:17:39,794 [salt.state       :300 ][INFO    ][29417] {'pid': 30045, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-11-05 17:17:39,796 [salt.state       :1951][INFO    ][29417] Completed state [panko-dbsync] at time 17:17:39.796873 duration_in_ms=2399.026
2018-11-05 17:17:39,811 [salt.state       :1780][INFO    ][29417] Running state [wsgi_panko] at time 17:17:39.811027
2018-11-05 17:17:39,811 [salt.state       :1813][INFO    ][29417] Executing state apache_site.enabled for [wsgi_panko]
2018-11-05 17:17:39,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-11-05 17:17:39,889 [salt.state       :300 ][INFO    ][29417] {'new': 'wsgi_panko', 'old': None}
2018-11-05 17:17:39,890 [salt.state       :1951][INFO    ][29417] Completed state [wsgi_panko] at time 17:17:39.890204 duration_in_ms=79.176
2018-11-05 17:17:40,614 [salt.state       :1780][INFO    ][29417] Running state [apache2] at time 17:17:40.614450
2018-11-05 17:17:40,615 [salt.state       :1813][INFO    ][29417] Executing state service.running for [apache2]
2018-11-05 17:17:40,617 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:17:40,643 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:17:40,671 [salt.state       :300 ][INFO    ][29417] The service apache2 is already running
2018-11-05 17:17:40,672 [salt.state       :1951][INFO    ][29417] Completed state [apache2] at time 17:17:40.672002 duration_in_ms=57.55
2018-11-05 17:17:40,672 [salt.state       :1780][INFO    ][29417] Running state [apache2] at time 17:17:40.672361
2018-11-05 17:17:40,673 [salt.state       :1813][INFO    ][29417] Executing state service.mod_watch for [apache2]
2018-11-05 17:17:40,676 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:17:40,699 [salt.loaded.int.module.cmdmod:395 ][INFO    ][29417] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-11-05 17:17:43,027 [salt.state       :300 ][INFO    ][29417] {'apache2': True}
2018-11-05 17:17:43,028 [salt.state       :1951][INFO    ][29417] Completed state [apache2] at time 17:17:43.028054 duration_in_ms=2355.689
2018-11-05 17:17:43,035 [salt.minion      :1711][INFO    ][29417] Returning information for job: 20181105171718472716
2018-11-05 17:18:30,581 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command test.ping with jid 20181105171830558641
2018-11-05 17:18:30,603 [salt.minion      :1432][INFO    ][30224] Starting a new job with PID 30224
2018-11-05 17:18:30,630 [salt.minion      :1711][INFO    ][30224] Returning information for job: 20181105171830558641
2018-11-05 17:18:30,777 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105171830759824
2018-11-05 17:18:30,795 [salt.minion      :1432][INFO    ][30229] Starting a new job with PID 30229
2018-11-05 17:18:35,894 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171835876909
2018-11-05 17:18:35,918 [salt.minion      :1432][INFO    ][30234] Starting a new job with PID 30234
2018-11-05 17:18:35,943 [salt.minion      :1711][INFO    ][30234] Returning information for job: 20181105171835876909
2018-11-05 17:18:37,019 [salt.state       :915 ][INFO    ][30229] Loading fresh modules for state activity
2018-11-05 17:18:37,090 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-11-05 17:18:37,132 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-11-05 17:18:37,336 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-11-05 17:18:37,416 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-11-05 17:18:40,291 [salt.state       :1780][INFO    ][30229] Running state [aodh-api] at time 17:18:40.291835
2018-11-05 17:18:40,293 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [aodh-api]
2018-11-05 17:18:40,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:18:40,875 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-11-05 17:18:41,067 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 17:18:43,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:18:43,601 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-11-05 17:18:46,031 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171846011444
2018-11-05 17:18:46,053 [salt.minion      :1432][INFO    ][30680] Starting a new job with PID 30680
2018-11-05 17:18:46,081 [salt.minion      :1711][INFO    ][30680] Returning information for job: 20181105171846011444
2018-11-05 17:18:56,191 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171856169042
2018-11-05 17:18:56,214 [salt.minion      :1432][INFO    ][32684] Starting a new job with PID 32684
2018-11-05 17:18:56,238 [salt.minion      :1711][INFO    ][32684] Returning information for job: 20181105171856169042
2018-11-05 17:19:01,511 [salt.utils.schedule:1377][INFO    ][3121] Running scheduled job: __mine_interval
2018-11-05 17:19:01,934 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:19:02,008 [salt.state       :300 ][INFO    ][30229] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-138.164'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.5'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.5'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-11-05 17:19:02,059 [salt.state       :915 ][INFO    ][30229] Loading fresh modules for state activity
2018-11-05 17:19:02,325 [salt.state       :1951][INFO    ][30229] Completed state [aodh-api] at time 17:19:02.325122 duration_in_ms=22033.287
2018-11-05 17:19:02,333 [salt.state       :1780][INFO    ][30229] Running state [aodh-evaluator] at time 17:19:02.333331
2018-11-05 17:19:02,333 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [aodh-evaluator]
2018-11-05 17:19:03,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:19:03,490 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-11-05 17:19:06,352 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171906330363
2018-11-05 17:19:06,373 [salt.minion      :1432][INFO    ][3678] Starting a new job with PID 3678
2018-11-05 17:19:06,429 [salt.minion      :1711][INFO    ][3678] Returning information for job: 20181105171906330363
2018-11-05 17:19:07,539 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:19:07,605 [salt.state       :300 ][INFO    ][30229] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-05 17:19:07,643 [salt.state       :915 ][INFO    ][30229] Loading fresh modules for state activity
2018-11-05 17:19:07,710 [salt.state       :1951][INFO    ][30229] Completed state [aodh-evaluator] at time 17:19:07.710328 duration_in_ms=5376.997
2018-11-05 17:19:07,724 [salt.state       :1780][INFO    ][30229] Running state [aodh-notifier] at time 17:19:07.724066
2018-11-05 17:19:07,724 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [aodh-notifier]
2018-11-05 17:19:09,005 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:19:09,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-11-05 17:19:13,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:19:13,251 [salt.state       :300 ][INFO    ][30229] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-05 17:19:13,315 [salt.state       :915 ][INFO    ][30229] Loading fresh modules for state activity
2018-11-05 17:19:13,393 [salt.state       :1951][INFO    ][30229] Completed state [aodh-notifier] at time 17:19:13.393288 duration_in_ms=5669.222
2018-11-05 17:19:13,408 [salt.state       :1780][INFO    ][30229] Running state [aodh-listener] at time 17:19:13.408210
2018-11-05 17:19:13,408 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [aodh-listener]
2018-11-05 17:19:15,037 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:19:15,079 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-11-05 17:19:16,537 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171916520298
2018-11-05 17:19:16,558 [salt.minion      :1432][INFO    ][4126] Starting a new job with PID 4126
2018-11-05 17:19:16,584 [salt.minion      :1711][INFO    ][4126] Returning information for job: 20181105171916520298
2018-11-05 17:19:19,143 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:19:19,209 [salt.state       :300 ][INFO    ][30229] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-11-05 17:19:19,246 [salt.state       :915 ][INFO    ][30229] Loading fresh modules for state activity
2018-11-05 17:19:19,310 [salt.state       :1951][INFO    ][30229] Completed state [aodh-listener] at time 17:19:19.310340 duration_in_ms=5902.129
2018-11-05 17:19:19,316 [salt.state       :1780][INFO    ][30229] Running state [python-aodhclient] at time 17:19:19.316616
2018-11-05 17:19:19,316 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [python-aodhclient]
2018-11-05 17:19:20,830 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:19:20,875 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-11-05 17:19:23,547 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:19:23,606 [salt.state       :300 ][INFO    ][30229] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-11-05 17:19:23,651 [salt.state       :915 ][INFO    ][30229] Loading fresh modules for state activity
2018-11-05 17:19:23,702 [salt.state       :1951][INFO    ][30229] Completed state [python-aodhclient] at time 17:19:23.702528 duration_in_ms=4385.91
2018-11-05 17:19:23,705 [salt.state       :1780][INFO    ][30229] Running state [aodh_ssl_mysql] at time 17:19:23.705611
2018-11-05 17:19:23,705 [salt.state       :1813][INFO    ][30229] Executing state test.show_notification for [aodh_ssl_mysql]
2018-11-05 17:19:23,706 [salt.state       :300 ][INFO    ][30229] Running aodh._ssl.mysql
2018-11-05 17:19:23,707 [salt.state       :1951][INFO    ][30229] Completed state [aodh_ssl_mysql] at time 17:19:23.707751 duration_in_ms=2.14
2018-11-05 17:19:23,708 [salt.state       :1780][INFO    ][30229] Running state [aodh_ssl_rabbitmq] at time 17:19:23.708206
2018-11-05 17:19:23,708 [salt.state       :1813][INFO    ][30229] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-11-05 17:19:23,709 [salt.state       :300 ][INFO    ][30229] Running aodh._ssl.rabbitmq
2018-11-05 17:19:23,710 [salt.state       :1951][INFO    ][30229] Completed state [aodh_ssl_rabbitmq] at time 17:19:23.710094 duration_in_ms=1.888
2018-11-05 17:19:23,719 [salt.state       :1780][INFO    ][30229] Running state [apache2] at time 17:19:23.718986
2018-11-05 17:19:23,719 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [apache2]
2018-11-05 17:19:24,890 [salt.state       :300 ][INFO    ][30229] All specified packages are already installed
2018-11-05 17:19:24,891 [salt.state       :1951][INFO    ][30229] Completed state [apache2] at time 17:19:24.890958 duration_in_ms=1171.971
2018-11-05 17:19:24,891 [salt.state       :1780][INFO    ][30229] Running state [openssl] at time 17:19:24.891306
2018-11-05 17:19:24,891 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [openssl]
2018-11-05 17:19:24,903 [salt.state       :300 ][INFO    ][30229] All specified packages are already installed
2018-11-05 17:19:24,904 [salt.state       :1951][INFO    ][30229] Completed state [openssl] at time 17:19:24.904037 duration_in_ms=12.731
2018-11-05 17:19:24,904 [salt.state       :1780][INFO    ][30229] Running state [a2enmod rewrite] at time 17:19:24.904805
2018-11-05 17:19:24,905 [salt.state       :1813][INFO    ][30229] Executing state cmd.run for [a2enmod rewrite]
2018-11-05 17:19:24,905 [salt.state       :300 ][INFO    ][30229] /etc/apache2/mods-enabled/rewrite.load exists
2018-11-05 17:19:24,905 [salt.state       :1951][INFO    ][30229] Completed state [a2enmod rewrite] at time 17:19:24.905739 duration_in_ms=0.934
2018-11-05 17:19:24,906 [salt.state       :1780][INFO    ][30229] Running state [libapache2-mod-wsgi] at time 17:19:24.906306
2018-11-05 17:19:24,907 [salt.state       :1813][INFO    ][30229] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-11-05 17:19:24,919 [salt.state       :300 ][INFO    ][30229] All specified packages are already installed
2018-11-05 17:19:24,919 [salt.state       :1951][INFO    ][30229] Completed state [libapache2-mod-wsgi] at time 17:19:24.919234 duration_in_ms=12.928
2018-11-05 17:19:24,919 [salt.state       :1780][INFO    ][30229] Running state [a2enmod wsgi] at time 17:19:24.919767
2018-11-05 17:19:24,920 [salt.state       :1813][INFO    ][30229] Executing state cmd.run for [a2enmod wsgi]
2018-11-05 17:19:24,920 [salt.state       :300 ][INFO    ][30229] /etc/apache2/mods-enabled/wsgi.load exists
2018-11-05 17:19:24,920 [salt.state       :1951][INFO    ][30229] Completed state [a2enmod wsgi] at time 17:19:24.920615 duration_in_ms=0.847
2018-11-05 17:19:24,927 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:19:24.927280
2018-11-05 17:19:24,929 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-11-05 17:19:25,024 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-11-05 17:19:25,025 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 17:19:25.025164 duration_in_ms=97.884
2018-11-05 17:19:25,025 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:19:25.025415
2018-11-05 17:19:25,025 [salt.state       :1813][INFO    ][30229] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-11-05 17:19:25,026 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-11-05 17:19:25,026 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 17:19:25.026619 duration_in_ms=1.203
2018-11-05 17:19:25,026 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:19:25.026855
2018-11-05 17:19:25,027 [salt.state       :1813][INFO    ][30229] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-11-05 17:19:25,027 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-11-05 17:19:25,027 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 17:19:25.027604 duration_in_ms=0.749
2018-11-05 17:19:25,028 [salt.state       :1780][INFO    ][30229] Running state [a2enmod mpm_prefork] at time 17:19:25.028549
2018-11-05 17:19:25,029 [salt.state       :1813][INFO    ][30229] Executing state cmd.run for [a2enmod mpm_prefork]
2018-11-05 17:19:25,029 [salt.state       :300 ][INFO    ][30229] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-11-05 17:19:25,030 [salt.state       :1951][INFO    ][30229] Completed state [a2enmod mpm_prefork] at time 17:19:25.030068 duration_in_ms=1.519
2018-11-05 17:19:25,030 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:19:25.030308
2018-11-05 17:19:25,030 [salt.state       :1813][INFO    ][30229] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-11-05 17:19:25,030 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-11-05 17:19:25,031 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 17:19:25.031040 duration_in_ms=0.732
2018-11-05 17:19:25,031 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:19:25.031275
2018-11-05 17:19:25,031 [salt.state       :1813][INFO    ][30229] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-11-05 17:19:25,031 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-11-05 17:19:25,032 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 17:19:25.031997 duration_in_ms=0.722
2018-11-05 17:19:25,032 [salt.state       :1780][INFO    ][30229] Running state [apache_server_service_task] at time 17:19:25.032622
2018-11-05 17:19:25,032 [salt.state       :1813][INFO    ][30229] Executing state test.show_notification for [apache_server_service_task]
2018-11-05 17:19:25,033 [salt.state       :300 ][INFO    ][30229] Running apache.server.service
2018-11-05 17:19:25,033 [salt.state       :1951][INFO    ][30229] Completed state [apache_server_service_task] at time 17:19:25.033320 duration_in_ms=0.697
2018-11-05 17:19:25,033 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/ports.conf] at time 17:19:25.033904
2018-11-05 17:19:25,034 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/apache2/ports.conf]
2018-11-05 17:19:25,116 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/ports.conf is in the correct state
2018-11-05 17:19:25,117 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/ports.conf] at time 17:19:25.116263 duration_in_ms=82.359
2018-11-05 17:19:25,118 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/conf-available/security.conf] at time 17:19:25.118657
2018-11-05 17:19:25,118 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-11-05 17:19:25,208 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/conf-available/security.conf is in the correct state
2018-11-05 17:19:25,208 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/conf-available/security.conf] at time 17:19:25.208424 duration_in_ms=89.767
2018-11-05 17:19:25,220 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 17:19:25.220009
2018-11-05 17:19:25,220 [salt.state       :1813][INFO    ][30229] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-11-05 17:19:25,220 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-11-05 17:19:25,221 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 17:19:25.221487 duration_in_ms=1.478
2018-11-05 17:19:25,222 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:19:25.222681
2018-11-05 17:19:25,222 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-11-05 17:19:25,560 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-11-05 17:19:25,560 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 17:19:25.560810 duration_in_ms=338.128
2018-11-05 17:19:25,561 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:19:25.561697
2018-11-05 17:19:25,562 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-11-05 17:19:25,860 [salt.state       :300 ][INFO    ][30229] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-11-05 17:19:25,860 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 17:19:25.860740 duration_in_ms=299.042
2018-11-05 17:19:25,863 [salt.state       :1780][INFO    ][30229] Running state [apache2] at time 17:19:25.863432
2018-11-05 17:19:25,863 [salt.state       :1813][INFO    ][30229] Executing state service.running for [apache2]
2018-11-05 17:19:25,865 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-11-05 17:19:25,895 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:19:25,922 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:19:25,953 [salt.state       :300 ][INFO    ][30229] The service apache2 is already running
2018-11-05 17:19:25,954 [salt.state       :1951][INFO    ][30229] Completed state [apache2] at time 17:19:25.953893 duration_in_ms=90.461
2018-11-05 17:19:25,955 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/conf-enabled/security.conf] at time 17:19:25.955739
2018-11-05 17:19:25,956 [salt.state       :1813][INFO    ][30229] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-11-05 17:19:25,963 [salt.state       :300 ][INFO    ][30229] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-11-05 17:19:25,963 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/conf-enabled/security.conf] at time 17:19:25.963564 duration_in_ms=7.825
2018-11-05 17:19:25,964 [salt.state       :1780][INFO    ][30229] Running state [/etc/aodh/aodh.conf] at time 17:19:25.964542
2018-11-05 17:19:25,964 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-11-05 17:19:25,993 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-11-05 17:19:26,086 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-11-05 17:19:26,235 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-11-05 17:19:26,262 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-11-05 17:19:26,306 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-11-05 17:19:26,372 [salt.state       :300 ][INFO    ][30229] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,550 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
+# Minimum value: 0
+# Maximum value: 65535
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+
+
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +1121,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +1137,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +1175,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -671,36 +1189,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -775,995 +1263,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-11-05 17:19:26,375 [salt.state       :1951][INFO    ][30229] Completed state [/etc/aodh/aodh.conf] at time 17:19:26.375432 duration_in_ms=410.889
2018-11-05 17:19:26,377 [salt.state       :1780][INFO    ][30229] Running state [/etc/default/aodh-evaluator] at time 17:19:26.377135
2018-11-05 17:19:26,377 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-11-05 17:19:26,400 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-11-05 17:19:26,413 [salt.state       :300 ][INFO    ][30229] File changed:
New file
2018-11-05 17:19:26,414 [salt.state       :1951][INFO    ][30229] Completed state [/etc/default/aodh-evaluator] at time 17:19:26.414022 duration_in_ms=36.887
2018-11-05 17:19:26,415 [salt.state       :1780][INFO    ][30229] Running state [/etc/default/aodh-notifier] at time 17:19:26.415147
2018-11-05 17:19:26,415 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/default/aodh-notifier]
2018-11-05 17:19:26,442 [salt.state       :300 ][INFO    ][30229] File changed:
New file
2018-11-05 17:19:26,443 [salt.state       :1951][INFO    ][30229] Completed state [/etc/default/aodh-notifier] at time 17:19:26.443233 duration_in_ms=28.086
2018-11-05 17:19:26,444 [salt.state       :1780][INFO    ][30229] Running state [/etc/default/aodh-listener] at time 17:19:26.444452
2018-11-05 17:19:26,444 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/default/aodh-listener]
2018-11-05 17:19:26,479 [salt.state       :300 ][INFO    ][30229] File changed:
New file
2018-11-05 17:19:26,480 [salt.state       :1951][INFO    ][30229] Completed state [/etc/default/aodh-listener] at time 17:19:26.480019 duration_in_ms=35.567
2018-11-05 17:19:26,483 [salt.state       :1780][INFO    ][30229] Running state [aodh-dbsync] at time 17:19:26.483374
2018-11-05 17:19:26,483 [salt.state       :1813][INFO    ][30229] Executing state cmd.run for [aodh-dbsync]
2018-11-05 17:19:26,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command 'aodh-dbsync' in directory '/root'
2018-11-05 17:19:26,701 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171926678700
2018-11-05 17:19:26,748 [salt.minion      :1432][INFO    ][4518] Starting a new job with PID 4518
2018-11-05 17:19:26,811 [salt.minion      :1711][INFO    ][4518] Returning information for job: 20181105171926678700
2018-11-05 17:19:29,451 [salt.state       :300 ][INFO    ][30229] {'pid': 4514, 'retcode': 0, 'stderr': '', 'stdout': '2018-11-05 17:19:29.065 4515 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-11-05 17:19:29.065 4515 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-11-05 17:19:29,454 [salt.state       :1951][INFO    ][30229] Completed state [aodh-dbsync] at time 17:19:29.453880 duration_in_ms=2970.506
2018-11-05 17:19:29,458 [salt.state       :1780][INFO    ][30229] Running state [/usr/bin/aodh-expirer] at time 17:19:29.458578
2018-11-05 17:19:29,459 [salt.state       :1813][INFO    ][30229] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-11-05 17:19:29,460 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command 'crontab -u aodh -l' in directory '/root'
2018-11-05 17:19:29,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command 'crontab -u aodh /tmp/__salt.tmp.3G8_Id' in directory '/root'
2018-11-05 17:19:29,524 [salt.state       :300 ][INFO    ][30229] {'aodh': '/usr/bin/aodh-expirer'}
2018-11-05 17:19:29,525 [salt.state       :1951][INFO    ][30229] Completed state [/usr/bin/aodh-expirer] at time 17:19:29.525667 duration_in_ms=67.089
2018-11-05 17:19:29,527 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 17:19:29.527782
2018-11-05 17:19:29,529 [salt.state       :1813][INFO    ][30229] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-11-05 17:19:29,559 [salt.fileclient  :1219][INFO    ][30229] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-11-05 17:19:29,615 [salt.state       :300 ][INFO    ][30229] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-11-05 17:19:29,618 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 17:19:29.618196 duration_in_ms=90.414
2018-11-05 17:19:29,618 [salt.state       :1780][INFO    ][30229] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 17:19:29.618675
2018-11-05 17:19:29,619 [salt.state       :1813][INFO    ][30229] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-11-05 17:19:29,622 [salt.state       :300 ][INFO    ][30229] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-11-05 17:19:29,623 [salt.state       :1951][INFO    ][30229] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 17:19:29.622974 duration_in_ms=4.299
2018-11-05 17:19:29,625 [salt.state       :1780][INFO    ][30229] Running state [apache2] at time 17:19:29.625083
2018-11-05 17:19:29,626 [salt.state       :1813][INFO    ][30229] Executing state service.running for [apache2]
2018-11-05 17:19:29,627 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:19:29,654 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-11-05 17:19:29,685 [salt.state       :300 ][INFO    ][30229] The service apache2 is already running
2018-11-05 17:19:29,686 [salt.state       :1951][INFO    ][30229] Completed state [apache2] at time 17:19:29.685979 duration_in_ms=60.897
2018-11-05 17:19:29,686 [salt.state       :1780][INFO    ][30229] Running state [apache2] at time 17:19:29.686370
2018-11-05 17:19:29,689 [salt.state       :1813][INFO    ][30229] Executing state service.mod_watch for [apache2]
2018-11-05 17:19:29,691 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-11-05 17:19:29,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-11-05 17:19:32,106 [salt.state       :300 ][INFO    ][30229] {'apache2': True}
2018-11-05 17:19:32,107 [salt.state       :1951][INFO    ][30229] Completed state [apache2] at time 17:19:32.107038 duration_in_ms=2420.668
2018-11-05 17:19:32,110 [salt.state       :1780][INFO    ][30229] Running state [aodh-evaluator] at time 17:19:32.110349
2018-11-05 17:19:32,111 [salt.state       :1813][INFO    ][30229] Executing state service.running for [aodh-evaluator]
2018-11-05 17:19:32,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-11-05 17:19:32,141 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-11-05 17:19:32,166 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-11-05 17:19:32,195 [salt.state       :300 ][INFO    ][30229] The service aodh-evaluator is already running
2018-11-05 17:19:32,196 [salt.state       :1951][INFO    ][30229] Completed state [aodh-evaluator] at time 17:19:32.196355 duration_in_ms=86.006
2018-11-05 17:19:32,197 [salt.state       :1780][INFO    ][30229] Running state [aodh-evaluator] at time 17:19:32.196957
2018-11-05 17:19:32,197 [salt.state       :1813][INFO    ][30229] Executing state service.mod_watch for [aodh-evaluator]
2018-11-05 17:19:32,199 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-11-05 17:19:32,228 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-11-05 17:19:32,449 [salt.state       :300 ][INFO    ][30229] {'aodh-evaluator': True}
2018-11-05 17:19:32,459 [salt.state       :1951][INFO    ][30229] Completed state [aodh-evaluator] at time 17:19:32.459553 duration_in_ms=262.595
2018-11-05 17:19:32,467 [salt.state       :1780][INFO    ][30229] Running state [aodh-notifier] at time 17:19:32.466994
2018-11-05 17:19:32,467 [salt.state       :1813][INFO    ][30229] Executing state service.running for [aodh-notifier]
2018-11-05 17:19:32,468 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-11-05 17:19:32,536 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-11-05 17:19:32,564 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-11-05 17:19:32,595 [salt.state       :300 ][INFO    ][30229] The service aodh-notifier is already running
2018-11-05 17:19:32,596 [salt.state       :1951][INFO    ][30229] Completed state [aodh-notifier] at time 17:19:32.596125 duration_in_ms=129.13
2018-11-05 17:19:32,596 [salt.state       :1780][INFO    ][30229] Running state [aodh-notifier] at time 17:19:32.596443
2018-11-05 17:19:32,596 [salt.state       :1813][INFO    ][30229] Executing state service.mod_watch for [aodh-notifier]
2018-11-05 17:19:32,597 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-11-05 17:19:32,638 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-11-05 17:19:36,743 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171936723733
2018-11-05 17:19:36,773 [salt.minion      :1432][INFO    ][4782] Starting a new job with PID 4782
2018-11-05 17:19:36,813 [salt.minion      :1711][INFO    ][4782] Returning information for job: 20181105171936723733
2018-11-05 17:19:46,941 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171946920323
2018-11-05 17:19:46,970 [salt.minion      :1432][INFO    ][4808] Starting a new job with PID 4808
2018-11-05 17:19:46,999 [salt.minion      :1711][INFO    ][4808] Returning information for job: 20181105171946920323
2018-11-05 17:19:47,918 [salt.state       :300 ][INFO    ][30229] {'aodh-notifier': True}
2018-11-05 17:19:47,919 [salt.state       :1951][INFO    ][30229] Completed state [aodh-notifier] at time 17:19:47.919004 duration_in_ms=15322.56
2018-11-05 17:19:47,921 [salt.state       :1780][INFO    ][30229] Running state [aodh-listener] at time 17:19:47.921058
2018-11-05 17:19:47,929 [salt.state       :1813][INFO    ][30229] Executing state service.running for [aodh-listener]
2018-11-05 17:19:47,931 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-11-05 17:19:47,974 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-11-05 17:19:47,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-11-05 17:19:48,014 [salt.state       :300 ][INFO    ][30229] The service aodh-listener is already running
2018-11-05 17:19:48,015 [salt.state       :1951][INFO    ][30229] Completed state [aodh-listener] at time 17:19:48.015567 duration_in_ms=94.508
2018-11-05 17:19:48,016 [salt.state       :1780][INFO    ][30229] Running state [aodh-listener] at time 17:19:48.016148
2018-11-05 17:19:48,018 [salt.state       :1813][INFO    ][30229] Executing state service.mod_watch for [aodh-listener]
2018-11-05 17:19:48,019 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-11-05 17:19:48,045 [salt.loaded.int.module.cmdmod:395 ][INFO    ][30229] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-11-05 17:19:57,119 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105171957100937
2018-11-05 17:19:57,143 [salt.minion      :1432][INFO    ][4878] Starting a new job with PID 4878
2018-11-05 17:19:57,166 [salt.minion      :1711][INFO    ][4878] Returning information for job: 20181105171957100937
2018-11-05 17:20:03,167 [salt.state       :300 ][INFO    ][30229] {'aodh-listener': True}
2018-11-05 17:20:03,168 [salt.state       :1951][INFO    ][30229] Completed state [aodh-listener] at time 17:20:03.168379 duration_in_ms=15152.23
2018-11-05 17:20:03,184 [salt.minion      :1711][INFO    ][30229] Returning information for job: 20181105171830759824
2018-11-05 17:23:01,059 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command state.sls with jid 20181105172301041819
2018-11-05 17:23:01,087 [salt.minion      :1432][INFO    ][4943] Starting a new job with PID 4943
2018-11-05 17:23:06,150 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172306133022
2018-11-05 17:23:06,173 [salt.minion      :1432][INFO    ][4948] Starting a new job with PID 4948
2018-11-05 17:23:06,200 [salt.minion      :1711][INFO    ][4948] Returning information for job: 20181105172306133022
2018-11-05 17:23:08,130 [salt.state       :915 ][INFO    ][4943] Loading fresh modules for state activity
2018-11-05 17:23:08,206 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-11-05 17:23:08,246 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-11-05 17:23:08,450 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2018-11-05 17:23:10,791 [salt.state       :1780][INFO    ][4943] Running state [ceilometer-agent-central] at time 17:23:10.791244
2018-11-05 17:23:10,791 [salt.state       :1813][INFO    ][4943] Executing state pkg.installed for [ceilometer-agent-central]
2018-11-05 17:23:10,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:23:11,399 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-11-05 17:23:11,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-11-05 17:23:14,191 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:23:14,236 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-11-05 17:23:16,240 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172316223865
2018-11-05 17:23:16,269 [salt.minion      :1432][INFO    ][5326] Starting a new job with PID 5326
2018-11-05 17:23:16,299 [salt.minion      :1711][INFO    ][5326] Returning information for job: 20181105172316223865
2018-11-05 17:23:26,466 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172326442928
2018-11-05 17:23:26,490 [salt.minion      :1432][INFO    ][5331] Starting a new job with PID 5331
2018-11-05 17:23:26,513 [salt.minion      :1711][INFO    ][5331] Returning information for job: 20181105172326442928
2018-11-05 17:23:36,677 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172336654061
2018-11-05 17:23:36,711 [salt.minion      :1432][INFO    ][5336] Starting a new job with PID 5336
2018-11-05 17:23:36,738 [salt.minion      :1711][INFO    ][5336] Returning information for job: 20181105172336654061
2018-11-05 17:23:46,898 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172346876377
2018-11-05 17:23:46,927 [salt.minion      :1432][INFO    ][5341] Starting a new job with PID 5341
2018-11-05 17:23:46,951 [salt.minion      :1711][INFO    ][5341] Returning information for job: 20181105172346876377
2018-11-05 17:23:57,112 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172357095035
2018-11-05 17:23:57,141 [salt.minion      :1432][INFO    ][5346] Starting a new job with PID 5346
2018-11-05 17:23:57,172 [salt.minion      :1711][INFO    ][5346] Returning information for job: 20181105172357095035
2018-11-05 17:24:07,339 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172407315894
2018-11-05 17:24:07,365 [salt.minion      :1432][INFO    ][5351] Starting a new job with PID 5351
2018-11-05 17:24:07,401 [salt.minion      :1711][INFO    ][5351] Returning information for job: 20181105172407315894
2018-11-05 17:24:17,356 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172417334189
2018-11-05 17:24:17,378 [salt.minion      :1432][INFO    ][5356] Starting a new job with PID 5356
2018-11-05 17:24:17,400 [salt.minion      :1711][INFO    ][5356] Returning information for job: 20181105172417334189
2018-11-05 17:24:27,571 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172427554686
2018-11-05 17:24:27,599 [salt.minion      :1432][INFO    ][5361] Starting a new job with PID 5361
2018-11-05 17:24:27,628 [salt.minion      :1711][INFO    ][5361] Returning information for job: 20181105172427554686
2018-11-05 17:24:37,592 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172437568228
2018-11-05 17:24:37,625 [salt.minion      :1432][INFO    ][5366] Starting a new job with PID 5366
2018-11-05 17:24:37,649 [salt.minion      :1711][INFO    ][5366] Returning information for job: 20181105172437568228
2018-11-05 17:24:47,812 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172447788130
2018-11-05 17:24:47,838 [salt.minion      :1432][INFO    ][5371] Starting a new job with PID 5371
2018-11-05 17:24:47,865 [salt.minion      :1711][INFO    ][5371] Returning information for job: 20181105172447788130
2018-11-05 17:24:57,829 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172457809354
2018-11-05 17:24:57,854 [salt.minion      :1432][INFO    ][5377] Starting a new job with PID 5377
2018-11-05 17:24:57,880 [salt.minion      :1711][INFO    ][5377] Returning information for job: 20181105172457809354
2018-11-05 17:25:07,843 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172507822809
2018-11-05 17:25:07,869 [salt.minion      :1432][INFO    ][5382] Starting a new job with PID 5382
2018-11-05 17:25:07,903 [salt.minion      :1711][INFO    ][5382] Returning information for job: 20181105172507822809
2018-11-05 17:25:17,870 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172517848915
2018-11-05 17:25:17,900 [salt.minion      :1432][INFO    ][5387] Starting a new job with PID 5387
2018-11-05 17:25:17,927 [salt.minion      :1711][INFO    ][5387] Returning information for job: 20181105172517848915
2018-11-05 17:25:27,884 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172527866554
2018-11-05 17:25:27,910 [salt.minion      :1432][INFO    ][5392] Starting a new job with PID 5392
2018-11-05 17:25:27,933 [salt.minion      :1711][INFO    ][5392] Returning information for job: 20181105172527866554
2018-11-05 17:25:37,907 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172537884589
2018-11-05 17:25:37,931 [salt.minion      :1432][INFO    ][5397] Starting a new job with PID 5397
2018-11-05 17:25:37,959 [salt.minion      :1711][INFO    ][5397] Returning information for job: 20181105172537884589
2018-11-05 17:25:47,926 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172547909818
2018-11-05 17:25:47,951 [salt.minion      :1432][INFO    ][5402] Starting a new job with PID 5402
2018-11-05 17:25:47,975 [salt.minion      :1711][INFO    ][5402] Returning information for job: 20181105172547909818
2018-11-05 17:25:57,948 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172557926331
2018-11-05 17:25:57,972 [salt.minion      :1432][INFO    ][5407] Starting a new job with PID 5407
2018-11-05 17:25:57,995 [salt.minion      :1711][INFO    ][5407] Returning information for job: 20181105172557926331
2018-11-05 17:26:07,972 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172607951369
2018-11-05 17:26:07,997 [salt.minion      :1432][INFO    ][5412] Starting a new job with PID 5412
2018-11-05 17:26:08,020 [salt.minion      :1711][INFO    ][5412] Returning information for job: 20181105172607951369
2018-11-05 17:26:18,006 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172617979744
2018-11-05 17:26:18,030 [salt.minion      :1432][INFO    ][5417] Starting a new job with PID 5417
2018-11-05 17:26:18,056 [salt.minion      :1711][INFO    ][5417] Returning information for job: 20181105172617979744
2018-11-05 17:26:28,047 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172628030347
2018-11-05 17:26:28,077 [salt.minion      :1432][INFO    ][5422] Starting a new job with PID 5422
2018-11-05 17:26:28,104 [salt.minion      :1711][INFO    ][5422] Returning information for job: 20181105172628030347
2018-11-05 17:26:38,092 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172638068438
2018-11-05 17:26:38,121 [salt.minion      :1432][INFO    ][5427] Starting a new job with PID 5427
2018-11-05 17:26:38,146 [salt.minion      :1711][INFO    ][5427] Returning information for job: 20181105172638068438
2018-11-05 17:26:48,136 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172648112610
2018-11-05 17:26:48,159 [salt.minion      :1432][INFO    ][5432] Starting a new job with PID 5432
2018-11-05 17:26:48,184 [salt.minion      :1711][INFO    ][5432] Returning information for job: 20181105172648112610
2018-11-05 17:26:58,156 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172658135704
2018-11-05 17:26:58,179 [salt.minion      :1432][INFO    ][5437] Starting a new job with PID 5437
2018-11-05 17:26:58,202 [salt.minion      :1711][INFO    ][5437] Returning information for job: 20181105172658135704
2018-11-05 17:27:08,194 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172708171567
2018-11-05 17:27:08,223 [salt.minion      :1432][INFO    ][5442] Starting a new job with PID 5442
2018-11-05 17:27:08,246 [salt.minion      :1711][INFO    ][5442] Returning information for job: 20181105172708171567
2018-11-05 17:27:18,244 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172718224990
2018-11-05 17:27:18,269 [salt.minion      :1432][INFO    ][5457] Starting a new job with PID 5457
2018-11-05 17:27:18,294 [salt.minion      :1711][INFO    ][5457] Returning information for job: 20181105172718224990
2018-11-05 17:27:28,288 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172728268883
2018-11-05 17:27:28,315 [salt.minion      :1432][INFO    ][5463] Starting a new job with PID 5463
2018-11-05 17:27:28,337 [salt.minion      :1711][INFO    ][5463] Returning information for job: 20181105172728268883
2018-11-05 17:27:38,344 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172738323162
2018-11-05 17:27:38,371 [salt.minion      :1432][INFO    ][5468] Starting a new job with PID 5468
2018-11-05 17:27:38,395 [salt.minion      :1711][INFO    ][5468] Returning information for job: 20181105172738323162
2018-11-05 17:27:48,407 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172748383573
2018-11-05 17:27:48,436 [salt.minion      :1432][INFO    ][5473] Starting a new job with PID 5473
2018-11-05 17:27:48,461 [salt.minion      :1711][INFO    ][5473] Returning information for job: 20181105172748383573
2018-11-05 17:27:58,460 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172758440676
2018-11-05 17:27:58,482 [salt.minion      :1432][INFO    ][5478] Starting a new job with PID 5478
2018-11-05 17:27:58,505 [salt.minion      :1711][INFO    ][5478] Returning information for job: 20181105172758440676
2018-11-05 17:28:08,497 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172808478560
2018-11-05 17:28:08,522 [salt.minion      :1432][INFO    ][5483] Starting a new job with PID 5483
2018-11-05 17:28:08,547 [salt.minion      :1711][INFO    ][5483] Returning information for job: 20181105172808478560
2018-11-05 17:28:18,564 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172818545988
2018-11-05 17:28:18,591 [salt.minion      :1432][INFO    ][5488] Starting a new job with PID 5488
2018-11-05 17:28:18,613 [salt.minion      :1711][INFO    ][5488] Returning information for job: 20181105172818545988
2018-11-05 17:28:28,641 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172828620244
2018-11-05 17:28:28,669 [salt.minion      :1432][INFO    ][5493] Starting a new job with PID 5493
2018-11-05 17:28:28,694 [salt.minion      :1711][INFO    ][5493] Returning information for job: 20181105172828620244
2018-11-05 17:28:38,726 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172838701989
2018-11-05 17:28:38,748 [salt.minion      :1432][INFO    ][5498] Starting a new job with PID 5498
2018-11-05 17:28:38,771 [salt.minion      :1711][INFO    ][5498] Returning information for job: 20181105172838701989
2018-11-05 17:28:48,808 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172848787720
2018-11-05 17:28:48,836 [salt.minion      :1432][INFO    ][5503] Starting a new job with PID 5503
2018-11-05 17:28:48,860 [salt.minion      :1711][INFO    ][5503] Returning information for job: 20181105172848787720
2018-11-05 17:28:58,883 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172858864603
2018-11-05 17:28:58,906 [salt.minion      :1432][INFO    ][5508] Starting a new job with PID 5508
2018-11-05 17:28:58,927 [salt.minion      :1711][INFO    ][5508] Returning information for job: 20181105172858864603
2018-11-05 17:29:08,940 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172908917488
2018-11-05 17:29:08,968 [salt.minion      :1432][INFO    ][5513] Starting a new job with PID 5513
2018-11-05 17:29:08,992 [salt.minion      :1711][INFO    ][5513] Returning information for job: 20181105172908917488
2018-11-05 17:29:19,040 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172919016814
2018-11-05 17:29:19,065 [salt.minion      :1432][INFO    ][5518] Starting a new job with PID 5518
2018-11-05 17:29:19,088 [salt.minion      :1711][INFO    ][5518] Returning information for job: 20181105172919016814
2018-11-05 17:29:29,124 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172929107619
2018-11-05 17:29:29,146 [salt.minion      :1432][INFO    ][5523] Starting a new job with PID 5523
2018-11-05 17:29:29,170 [salt.minion      :1711][INFO    ][5523] Returning information for job: 20181105172929107619
2018-11-05 17:29:39,246 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172939228372
2018-11-05 17:29:39,277 [salt.minion      :1432][INFO    ][5528] Starting a new job with PID 5528
2018-11-05 17:29:39,305 [salt.minion      :1711][INFO    ][5528] Returning information for job: 20181105172939228372
2018-11-05 17:29:49,364 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172949345457
2018-11-05 17:29:49,390 [salt.minion      :1432][INFO    ][5533] Starting a new job with PID 5533
2018-11-05 17:29:49,417 [salt.minion      :1711][INFO    ][5533] Returning information for job: 20181105172949345457
2018-11-05 17:29:59,481 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105172959459090
2018-11-05 17:29:59,506 [salt.minion      :1432][INFO    ][5538] Starting a new job with PID 5538
2018-11-05 17:29:59,531 [salt.minion      :1711][INFO    ][5538] Returning information for job: 20181105172959459090
2018-11-05 17:30:09,598 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173009581145
2018-11-05 17:30:09,627 [salt.minion      :1432][INFO    ][5543] Starting a new job with PID 5543
2018-11-05 17:30:09,653 [salt.minion      :1711][INFO    ][5543] Returning information for job: 20181105173009581145
2018-11-05 17:30:19,691 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173019673229
2018-11-05 17:30:19,714 [salt.minion      :1432][INFO    ][5548] Starting a new job with PID 5548
2018-11-05 17:30:19,736 [salt.minion      :1711][INFO    ][5548] Returning information for job: 20181105173019673229
2018-11-05 17:30:29,825 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173029800517
2018-11-05 17:30:29,848 [salt.minion      :1432][INFO    ][5553] Starting a new job with PID 5553
2018-11-05 17:30:29,872 [salt.minion      :1711][INFO    ][5553] Returning information for job: 20181105173029800517
2018-11-05 17:30:39,979 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173039959629
2018-11-05 17:30:40,004 [salt.minion      :1432][INFO    ][5558] Starting a new job with PID 5558
2018-11-05 17:30:40,032 [salt.minion      :1711][INFO    ][5558] Returning information for job: 20181105173039959629
2018-11-05 17:30:50,137 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173050112890
2018-11-05 17:30:50,161 [salt.minion      :1432][INFO    ][5563] Starting a new job with PID 5563
2018-11-05 17:30:50,199 [salt.minion      :1711][INFO    ][5563] Returning information for job: 20181105173050112890
2018-11-05 17:31:00,304 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173100282308
2018-11-05 17:31:00,331 [salt.minion      :1432][INFO    ][5568] Starting a new job with PID 5568
2018-11-05 17:31:00,358 [salt.minion      :1711][INFO    ][5568] Returning information for job: 20181105173100282308
2018-11-05 17:31:10,464 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173110441220
2018-11-05 17:31:10,490 [salt.minion      :1432][INFO    ][5573] Starting a new job with PID 5573
2018-11-05 17:31:10,519 [salt.minion      :1711][INFO    ][5573] Returning information for job: 20181105173110441220
2018-11-05 17:31:20,590 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173120564945
2018-11-05 17:31:20,615 [salt.minion      :1432][INFO    ][5578] Starting a new job with PID 5578
2018-11-05 17:31:20,637 [salt.minion      :1711][INFO    ][5578] Returning information for job: 20181105173120564945
2018-11-05 17:31:30,756 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173130731472
2018-11-05 17:31:30,783 [salt.minion      :1432][INFO    ][5583] Starting a new job with PID 5583
2018-11-05 17:31:30,806 [salt.minion      :1711][INFO    ][5583] Returning information for job: 20181105173130731472
2018-11-05 17:31:40,933 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173140913636
2018-11-05 17:31:40,969 [salt.minion      :1432][INFO    ][5588] Starting a new job with PID 5588
2018-11-05 17:31:40,993 [salt.minion      :1711][INFO    ][5588] Returning information for job: 20181105173140913636
2018-11-05 17:31:51,120 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173151102993
2018-11-05 17:31:51,145 [salt.minion      :1432][INFO    ][5593] Starting a new job with PID 5593
2018-11-05 17:31:51,172 [salt.minion      :1711][INFO    ][5593] Returning information for job: 20181105173151102993
2018-11-05 17:32:01,325 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173201301500
2018-11-05 17:32:01,348 [salt.minion      :1432][INFO    ][5598] Starting a new job with PID 5598
2018-11-05 17:32:01,371 [salt.minion      :1711][INFO    ][5598] Returning information for job: 20181105173201301500
2018-11-05 17:32:11,524 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173211499796
2018-11-05 17:32:11,546 [salt.minion      :1432][INFO    ][5613] Starting a new job with PID 5613
2018-11-05 17:32:11,570 [salt.minion      :1711][INFO    ][5613] Returning information for job: 20181105173211499796
2018-11-05 17:32:21,691 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173221671946
2018-11-05 17:32:21,721 [salt.minion      :1432][INFO    ][5618] Starting a new job with PID 5618
2018-11-05 17:32:21,747 [salt.minion      :1711][INFO    ][5618] Returning information for job: 20181105173221671946
2018-11-05 17:32:31,877 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173231853676
2018-11-05 17:32:31,902 [salt.minion      :1432][INFO    ][5624] Starting a new job with PID 5624
2018-11-05 17:32:31,927 [salt.minion      :1711][INFO    ][5624] Returning information for job: 20181105173231853676
2018-11-05 17:32:42,103 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173242080996
2018-11-05 17:32:42,132 [salt.minion      :1432][INFO    ][5629] Starting a new job with PID 5629
2018-11-05 17:32:42,154 [salt.minion      :1711][INFO    ][5629] Returning information for job: 20181105173242080996
2018-11-05 17:32:52,130 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173252108795
2018-11-05 17:32:52,152 [salt.minion      :1432][INFO    ][5634] Starting a new job with PID 5634
2018-11-05 17:32:52,175 [salt.minion      :1711][INFO    ][5634] Returning information for job: 20181105173252108795
2018-11-05 17:33:02,150 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173302128558
2018-11-05 17:33:02,175 [salt.minion      :1432][INFO    ][5639] Starting a new job with PID 5639
2018-11-05 17:33:02,199 [salt.minion      :1711][INFO    ][5639] Returning information for job: 20181105173302128558
2018-11-05 17:33:12,379 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173312355546
2018-11-05 17:33:12,408 [salt.minion      :1432][INFO    ][5644] Starting a new job with PID 5644
2018-11-05 17:33:12,431 [salt.minion      :1711][INFO    ][5644] Returning information for job: 20181105173312355546
2018-11-05 17:33:22,401 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173322382052
2018-11-05 17:33:22,426 [salt.minion      :1432][INFO    ][5649] Starting a new job with PID 5649
2018-11-05 17:33:22,449 [salt.minion      :1711][INFO    ][5649] Returning information for job: 20181105173322382052
2018-11-05 17:33:32,574 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173332553593
2018-11-05 17:33:32,596 [salt.minion      :1432][INFO    ][5655] Starting a new job with PID 5655
2018-11-05 17:33:32,618 [salt.minion      :1711][INFO    ][5655] Returning information for job: 20181105173332553593
2018-11-05 17:33:42,619 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173342600772
2018-11-05 17:33:42,641 [salt.minion      :1432][INFO    ][5660] Starting a new job with PID 5660
2018-11-05 17:33:42,665 [salt.minion      :1711][INFO    ][5660] Returning information for job: 20181105173342600772
2018-11-05 17:33:52,642 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173352625911
2018-11-05 17:33:52,668 [salt.minion      :1432][INFO    ][5665] Starting a new job with PID 5665
2018-11-05 17:33:52,695 [salt.minion      :1711][INFO    ][5665] Returning information for job: 20181105173352625911
2018-11-05 17:34:02,689 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173402667537
2018-11-05 17:34:02,718 [salt.minion      :1432][INFO    ][5670] Starting a new job with PID 5670
2018-11-05 17:34:02,743 [salt.minion      :1711][INFO    ][5670] Returning information for job: 20181105173402667537
2018-11-05 17:34:12,766 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173412745634
2018-11-05 17:34:12,790 [salt.minion      :1432][INFO    ][5675] Starting a new job with PID 5675
2018-11-05 17:34:12,815 [salt.minion      :1711][INFO    ][5675] Returning information for job: 20181105173412745634
2018-11-05 17:34:22,845 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173422823444
2018-11-05 17:34:22,868 [salt.minion      :1432][INFO    ][5680] Starting a new job with PID 5680
2018-11-05 17:34:22,892 [salt.minion      :1711][INFO    ][5680] Returning information for job: 20181105173422823444
2018-11-05 17:34:32,890 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173432874113
2018-11-05 17:34:32,912 [salt.minion      :1432][INFO    ][5685] Starting a new job with PID 5685
2018-11-05 17:34:32,937 [salt.minion      :1711][INFO    ][5685] Returning information for job: 20181105173432874113
2018-11-05 17:34:42,945 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173442926519
2018-11-05 17:34:42,973 [salt.minion      :1432][INFO    ][5690] Starting a new job with PID 5690
2018-11-05 17:34:42,998 [salt.minion      :1711][INFO    ][5690] Returning information for job: 20181105173442926519
2018-11-05 17:34:53,066 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173453041586
2018-11-05 17:34:53,088 [salt.minion      :1432][INFO    ][5695] Starting a new job with PID 5695
2018-11-05 17:34:53,110 [salt.minion      :1711][INFO    ][5695] Returning information for job: 20181105173453041586
2018-11-05 17:35:03,149 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173503124843
2018-11-05 17:35:03,172 [salt.minion      :1432][INFO    ][5700] Starting a new job with PID 5700
2018-11-05 17:35:03,196 [salt.minion      :1711][INFO    ][5700] Returning information for job: 20181105173503124843
2018-11-05 17:35:13,297 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173513274776
2018-11-05 17:35:13,322 [salt.minion      :1432][INFO    ][5705] Starting a new job with PID 5705
2018-11-05 17:35:13,347 [salt.minion      :1711][INFO    ][5705] Returning information for job: 20181105173513274776
2018-11-05 17:35:23,416 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173523398710
2018-11-05 17:35:23,442 [salt.minion      :1432][INFO    ][5710] Starting a new job with PID 5710
2018-11-05 17:35:23,466 [salt.minion      :1711][INFO    ][5710] Returning information for job: 20181105173523398710
2018-11-05 17:35:33,549 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173533534368
2018-11-05 17:35:33,577 [salt.minion      :1432][INFO    ][5715] Starting a new job with PID 5715
2018-11-05 17:35:33,604 [salt.minion      :1711][INFO    ][5715] Returning information for job: 20181105173533534368
2018-11-05 17:35:43,586 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173543571193
2018-11-05 17:35:43,613 [salt.minion      :1432][INFO    ][5720] Starting a new job with PID 5720
2018-11-05 17:35:43,638 [salt.minion      :1711][INFO    ][5720] Returning information for job: 20181105173543571193
2018-11-05 17:35:53,724 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173553706323
2018-11-05 17:35:53,753 [salt.minion      :1432][INFO    ][5725] Starting a new job with PID 5725
2018-11-05 17:35:53,779 [salt.minion      :1711][INFO    ][5725] Returning information for job: 20181105173553706323
2018-11-05 17:36:03,868 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173603850447
2018-11-05 17:36:03,892 [salt.minion      :1432][INFO    ][5730] Starting a new job with PID 5730
2018-11-05 17:36:03,915 [salt.minion      :1711][INFO    ][5730] Returning information for job: 20181105173603850447
2018-11-05 17:36:14,010 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173613989504
2018-11-05 17:36:14,039 [salt.minion      :1432][INFO    ][5735] Starting a new job with PID 5735
2018-11-05 17:36:14,063 [salt.minion      :1711][INFO    ][5735] Returning information for job: 20181105173613989504
2018-11-05 17:36:24,136 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173624114659
2018-11-05 17:36:24,165 [salt.minion      :1432][INFO    ][5740] Starting a new job with PID 5740
2018-11-05 17:36:24,190 [salt.minion      :1711][INFO    ][5740] Returning information for job: 20181105173624114659
2018-11-05 17:36:34,247 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173634228460
2018-11-05 17:36:34,270 [salt.minion      :1432][INFO    ][5745] Starting a new job with PID 5745
2018-11-05 17:36:34,295 [salt.minion      :1711][INFO    ][5745] Returning information for job: 20181105173634228460
2018-11-05 17:36:44,373 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173644354463
2018-11-05 17:36:44,406 [salt.minion      :1432][INFO    ][5750] Starting a new job with PID 5750
2018-11-05 17:36:44,430 [salt.minion      :1711][INFO    ][5750] Returning information for job: 20181105173644354463
2018-11-05 17:36:54,492 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173654472293
2018-11-05 17:36:54,520 [salt.minion      :1432][INFO    ][5765] Starting a new job with PID 5765
2018-11-05 17:36:54,553 [salt.minion      :1711][INFO    ][5765] Returning information for job: 20181105173654472293
2018-11-05 17:37:04,677 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173704659315
2018-11-05 17:37:04,708 [salt.minion      :1432][INFO    ][5770] Starting a new job with PID 5770
2018-11-05 17:37:04,731 [salt.minion      :1711][INFO    ][5770] Returning information for job: 20181105173704659315
2018-11-05 17:37:14,907 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173714884612
2018-11-05 17:37:14,929 [salt.minion      :1432][INFO    ][5775] Starting a new job with PID 5775
2018-11-05 17:37:14,953 [salt.minion      :1711][INFO    ][5775] Returning information for job: 20181105173714884612
2018-11-05 17:37:25,138 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173725119611
2018-11-05 17:37:25,166 [salt.minion      :1432][INFO    ][5780] Starting a new job with PID 5780
2018-11-05 17:37:25,189 [salt.minion      :1711][INFO    ][5780] Returning information for job: 20181105173725119611
2018-11-05 17:37:35,325 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173735307560
2018-11-05 17:37:35,351 [salt.minion      :1432][INFO    ][5786] Starting a new job with PID 5786
2018-11-05 17:37:35,382 [salt.minion      :1711][INFO    ][5786] Returning information for job: 20181105173735307560
2018-11-05 17:37:45,556 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173745537905
2018-11-05 17:37:45,578 [salt.minion      :1432][INFO    ][5791] Starting a new job with PID 5791
2018-11-05 17:37:45,605 [salt.minion      :1711][INFO    ][5791] Returning information for job: 20181105173745537905
2018-11-05 17:37:55,710 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173755686108
2018-11-05 17:37:55,736 [salt.minion      :1432][INFO    ][5796] Starting a new job with PID 5796
2018-11-05 17:37:55,762 [salt.minion      :1711][INFO    ][5796] Returning information for job: 20181105173755686108
2018-11-05 17:38:05,943 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173805920018
2018-11-05 17:38:05,967 [salt.minion      :1432][INFO    ][5801] Starting a new job with PID 5801
2018-11-05 17:38:05,991 [salt.minion      :1711][INFO    ][5801] Returning information for job: 20181105173805920018
2018-11-05 17:38:16,182 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173816157089
2018-11-05 17:38:16,209 [salt.minion      :1432][INFO    ][5806] Starting a new job with PID 5806
2018-11-05 17:38:16,236 [salt.minion      :1711][INFO    ][5806] Returning information for job: 20181105173816157089
2018-11-05 17:38:26,201 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173826180943
2018-11-05 17:38:26,228 [salt.minion      :1432][INFO    ][5811] Starting a new job with PID 5811
2018-11-05 17:38:26,255 [salt.minion      :1711][INFO    ][5811] Returning information for job: 20181105173826180943
2018-11-05 17:38:36,239 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173836220774
2018-11-05 17:38:36,260 [salt.minion      :1432][INFO    ][6278] Starting a new job with PID 6278
2018-11-05 17:38:36,285 [salt.minion      :1711][INFO    ][6278] Returning information for job: 20181105173836220774
2018-11-05 17:38:46,459 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173846437822
2018-11-05 17:38:46,485 [salt.minion      :1432][INFO    ][7721] Starting a new job with PID 7721
2018-11-05 17:38:46,544 [salt.minion      :1711][INFO    ][7721] Returning information for job: 20181105173846437822
2018-11-05 17:38:52,821 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:38:52,890 [salt.state       :300 ][INFO    ][4943] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-11-05 17:38:52,933 [salt.state       :915 ][INFO    ][4943] Loading fresh modules for state activity
2018-11-05 17:38:53,191 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer-agent-central] at time 17:38:53.191317 duration_in_ms=942400.073
2018-11-05 17:38:53,198 [salt.state       :1780][INFO    ][4943] Running state [python-ceilometerclient] at time 17:38:53.198493
2018-11-05 17:38:53,198 [salt.state       :1813][INFO    ][4943] Executing state pkg.installed for [python-ceilometerclient]
2018-11-05 17:38:54,203 [salt.state       :300 ][INFO    ][4943] All specified packages are already installed
2018-11-05 17:38:54,204 [salt.state       :1951][INFO    ][4943] Completed state [python-ceilometerclient] at time 17:38:54.204349 duration_in_ms=1005.853
2018-11-05 17:38:54,206 [salt.state       :1780][INFO    ][4943] Running state [ceilometer-agent-notification] at time 17:38:54.206270
2018-11-05 17:38:54,206 [salt.state       :1813][INFO    ][4943] Executing state pkg.installed for [ceilometer-agent-notification]
2018-11-05 17:38:54,248 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-11-05 17:38:54,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-11-05 17:38:56,504 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173856490304
2018-11-05 17:38:56,523 [salt.minion      :1432][INFO    ][8117] Starting a new job with PID 8117
2018-11-05 17:38:56,567 [salt.minion      :1711][INFO    ][8117] Returning information for job: 20181105173856490304
2018-11-05 17:38:58,461 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-11-05 17:38:58,523 [salt.state       :300 ][INFO    ][4943] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-11-05 17:38:58,557 [salt.state       :915 ][INFO    ][4943] Loading fresh modules for state activity
2018-11-05 17:38:58,620 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer-agent-notification] at time 17:38:58.620670 duration_in_ms=4414.399
2018-11-05 17:38:58,625 [salt.state       :1780][INFO    ][4943] Running state [ceilometer_ssl_rabbitmq] at time 17:38:58.625510
2018-11-05 17:38:58,625 [salt.state       :1813][INFO    ][4943] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2018-11-05 17:38:58,626 [salt.state       :300 ][INFO    ][4943] Running ceilometer._ssl.rabbitmq
2018-11-05 17:38:58,626 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer_ssl_rabbitmq] at time 17:38:58.626709 duration_in_ms=1.199
2018-11-05 17:38:58,630 [salt.state       :1780][INFO    ][4943] Running state [/etc/ceilometer/ceilometer.conf] at time 17:38:58.630253
2018-11-05 17:38:58,630 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-11-05 17:38:58,681 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-11-05 17:38:59,033 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-11-05 17:38:59,097 [salt.state       :300 ][INFO    ][4943] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-11-05 17:38:59,111 [salt.state       :1951][INFO    ][4943] Completed state [/etc/ceilometer/ceilometer.conf] at time 17:38:59.111323 duration_in_ms=481.069
2018-11-05 17:38:59,111 [salt.state       :1780][INFO    ][4943] Running state [/etc/default/ceilometer-agent-central] at time 17:38:59.111787
2018-11-05 17:38:59,112 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-11-05 17:38:59,155 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-11-05 17:38:59,204 [salt.state       :300 ][INFO    ][4943] File changed:
New file
2018-11-05 17:38:59,205 [salt.state       :1951][INFO    ][4943] Completed state [/etc/default/ceilometer-agent-central] at time 17:38:59.205051 duration_in_ms=93.264
2018-11-05 17:38:59,213 [salt.state       :1780][INFO    ][4943] Running state [/etc/default/ceilometer-agent-notification] at time 17:38:59.213222
2018-11-05 17:38:59,213 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-11-05 17:38:59,302 [salt.state       :300 ][INFO    ][4943] File changed:
New file
2018-11-05 17:38:59,308 [salt.state       :1951][INFO    ][4943] Completed state [/etc/default/ceilometer-agent-notification] at time 17:38:59.303577 duration_in_ms=90.355
2018-11-05 17:38:59,317 [salt.state       :1780][INFO    ][4943] Running state [python-gnocchiclient] at time 17:38:59.317898
2018-11-05 17:38:59,319 [salt.state       :1813][INFO    ][4943] Executing state pkg.latest for [python-gnocchiclient]
2018-11-05 17:38:59,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-11-05 17:38:59,692 [salt.state       :300 ][INFO    ][4943] Package python-gnocchiclient is already up-to-date
2018-11-05 17:38:59,694 [salt.state       :1951][INFO    ][4943] Completed state [python-gnocchiclient] at time 17:38:59.694200 duration_in_ms=376.302
2018-11-05 17:38:59,696 [salt.state       :1780][INFO    ][4943] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 17:38:59.696694
2018-11-05 17:38:59,702 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-11-05 17:38:59,724 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-11-05 17:38:59,752 [salt.state       :300 ][INFO    ][4943] File changed:
New file
2018-11-05 17:38:59,753 [salt.state       :1951][INFO    ][4943] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 17:38:59.753212 duration_in_ms=56.518
2018-11-05 17:38:59,755 [salt.state       :1780][INFO    ][4943] Running state [ceilometer-upgrade] at time 17:38:59.755466
2018-11-05 17:38:59,758 [salt.state       :1813][INFO    ][4943] Executing state cmd.run for [ceilometer-upgrade]
2018-11-05 17:38:59,759 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command 'ceilometer-upgrade' in directory '/root'
2018-11-05 17:39:06,609 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command saltutil.find_job with jid 20181105173906592125
2018-11-05 17:39:06,636 [salt.minion      :1432][INFO    ][8330] Starting a new job with PID 8330
2018-11-05 17:39:06,662 [salt.minion      :1711][INFO    ][8330] Returning information for job: 20181105173906592125
2018-11-05 17:39:12,531 [salt.state       :300 ][INFO    ][4943] {'pid': 8305, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-11-05 17:39:12,531 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer-upgrade] at time 17:39:12.531799 duration_in_ms=12776.333
2018-11-05 17:39:12,532 [salt.state       :1780][INFO    ][4943] Running state [/etc/ceilometer/pipeline.yaml] at time 17:39:12.532586
2018-11-05 17:39:12,533 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-11-05 17:39:12,563 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-11-05 17:39:12,658 [salt.state       :300 ][INFO    ][4943] File changed:
New file
2018-11-05 17:39:12,659 [salt.state       :1951][INFO    ][4943] Completed state [/etc/ceilometer/pipeline.yaml] at time 17:39:12.659134 duration_in_ms=126.548
2018-11-05 17:39:12,659 [salt.state       :1780][INFO    ][4943] Running state [/etc/ceilometer/event_pipeline.yaml] at time 17:39:12.659627
2018-11-05 17:39:12,659 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-11-05 17:39:12,693 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-11-05 17:39:12,914 [salt.state       :300 ][INFO    ][4943] File changed:
New file
2018-11-05 17:39:12,916 [salt.state       :1951][INFO    ][4943] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 17:39:12.916059 duration_in_ms=256.432
2018-11-05 17:39:12,916 [salt.state       :1780][INFO    ][4943] Running state [/etc/ceilometer/event_definitions.yaml] at time 17:39:12.916592
2018-11-05 17:39:12,918 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-11-05 17:39:12,949 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-11-05 17:39:12,988 [salt.state       :300 ][INFO    ][4943] File changed:
New file
2018-11-05 17:39:12,989 [salt.state       :1951][INFO    ][4943] Completed state [/etc/ceilometer/event_definitions.yaml] at time 17:39:12.989165 duration_in_ms=72.573
2018-11-05 17:39:12,991 [salt.state       :1780][INFO    ][4943] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 17:39:12.990977
2018-11-05 17:39:12,993 [salt.state       :1813][INFO    ][4943] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-11-05 17:39:13,017 [salt.fileclient  :1219][INFO    ][4943] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-11-05 17:39:13,037 [salt.state       :300 ][INFO    ][4943] File changed:
New file
2018-11-05 17:39:13,040 [salt.state       :1951][INFO    ][4943] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 17:39:13.040664 duration_in_ms=49.686
2018-11-05 17:39:14,307 [salt.state       :1780][INFO    ][4943] Running state [ceilometer-agent-central] at time 17:39:14.307865
2018-11-05 17:39:14,309 [salt.state       :1813][INFO    ][4943] Executing state service.running for [ceilometer-agent-central]
2018-11-05 17:39:14,310 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-11-05 17:39:14,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-05 17:39:14,366 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-05 17:39:14,386 [salt.state       :300 ][INFO    ][4943] The service ceilometer-agent-central is already running
2018-11-05 17:39:14,387 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer-agent-central] at time 17:39:14.387173 duration_in_ms=79.309
2018-11-05 17:39:14,387 [salt.state       :1780][INFO    ][4943] Running state [ceilometer-agent-central] at time 17:39:14.387904
2018-11-05 17:39:14,388 [salt.state       :1813][INFO    ][4943] Executing state service.mod_watch for [ceilometer-agent-central]
2018-11-05 17:39:14,389 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-05 17:39:14,411 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-11-05 17:39:14,721 [salt.state       :300 ][INFO    ][4943] {'ceilometer-agent-central': True}
2018-11-05 17:39:14,724 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer-agent-central] at time 17:39:14.721901 duration_in_ms=333.996
2018-11-05 17:39:14,727 [salt.state       :1780][INFO    ][4943] Running state [ceilometer-agent-notification] at time 17:39:14.727158
2018-11-05 17:39:14,727 [salt.state       :1813][INFO    ][4943] Executing state service.running for [ceilometer-agent-notification]
2018-11-05 17:39:14,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-11-05 17:39:14,761 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-05 17:39:14,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-05 17:39:14,817 [salt.state       :300 ][INFO    ][4943] The service ceilometer-agent-notification is already running
2018-11-05 17:39:14,817 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer-agent-notification] at time 17:39:14.817849 duration_in_ms=90.691
2018-11-05 17:39:14,819 [salt.state       :1780][INFO    ][4943] Running state [ceilometer-agent-notification] at time 17:39:14.818888
2018-11-05 17:39:14,819 [salt.state       :1813][INFO    ][4943] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-11-05 17:39:14,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-05 17:39:14,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4943] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-11-05 17:39:15,055 [salt.state       :300 ][INFO    ][4943] {'ceilometer-agent-notification': True}
2018-11-05 17:39:15,055 [salt.state       :1951][INFO    ][4943] Completed state [ceilometer-agent-notification] at time 17:39:15.055820 duration_in_ms=236.931
2018-11-05 17:39:15,072 [salt.minion      :1711][INFO    ][4943] Returning information for job: 20181105172301041819
2018-11-05 17:44:29,202 [salt.minion      :1308][INFO    ][3121] User sudo_ubuntu Executing command cp.push_dir with jid 20181105174429182488
2018-11-05 17:44:29,233 [salt.minion      :1432][INFO    ][8494] Starting a new job with PID 8494
