2018-10-25 02:30:32,597 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:32,750 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:32,753 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:32,758 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:32,762 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,101 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,104 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,107 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,179 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,183 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,188 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,192 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,375 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,530 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,537 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,542 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,549 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,554 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,559 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,565 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,570 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,575 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,580 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,585 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,589 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,593 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,599 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,602 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,607 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,610 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,615 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,620 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,625 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,629 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,656 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,666 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,676 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,685 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,695 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,704 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,712 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,718 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,723 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,729 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,733 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,738 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,743 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,747 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,752 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,756 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,761 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,765 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,770 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,775 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,780 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,784 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:30:33,789 [salt.utils.decorators:82  ][ERROR   ][1688] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-25 02:31:13,879 [salt.utils.decorators:613 ][WARNING ][1688] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-25 02:31:16,106 [salt.loaded.int.states.file:2150][WARNING ][1688] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-25 02:31:17,331 [salt.loaded.int.states.file:2150][WARNING ][1688] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-25 02:31:19,197 [salt.loaded.int.states.file:2150][WARNING ][1688] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-25 02:31:23,298 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2913] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-25 02:31:23,337 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2913] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-25 02:31:23,370 [salt.utils.parsers:1051][WARNING ][1336] Minion received a SIGTERM. Exiting.
2018-10-25 02:31:24,324 [salt.cli.daemons :293 ][INFO    ][2967] Setting up the Salt Minion "mdb01.mcp-ovs-ha.local"
2018-10-25 02:31:24,449 [salt.cli.daemons :82  ][INFO    ][2967] Starting up the Salt Minion
2018-10-25 02:31:24,449 [salt.utils.event :1017][INFO    ][2967] Starting pull socket on /var/run/salt/minion/minion_event_b0741cc873_pull.ipc
2018-10-25 02:31:25,262 [salt.minion      :976 ][INFO    ][2967] Creating minion process manager
2018-10-25 02:31:26,964 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2967] Executing command ['date', '+%z'] in directory '/root'
2018-10-25 02:31:26,997 [salt.utils.schedule:568 ][INFO    ][2967] Updating job settings for scheduled job: __mine_interval
2018-10-25 02:31:27,000 [salt.minion      :1107][INFO    ][2967] Added mine.update to scheduler
2018-10-25 02:31:27,005 [salt.minion      :1965][INFO    ][2967] Minion is starting as user 'root'
2018-10-25 02:31:27,020 [salt.minion      :2324][INFO    ][2967] Minion is ready to receive requests!
2018-10-25 02:32:18,895 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command state.apply with jid 20181025023218888566
2018-10-25 02:32:18,912 [salt.minion      :1431][INFO    ][3056] Starting a new job with PID 3056
2018-10-25 02:32:25,150 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023225144987
2018-10-25 02:32:25,188 [salt.minion      :1431][INFO    ][3061] Starting a new job with PID 3061
2018-10-25 02:32:25,211 [salt.minion      :1708][INFO    ][3061] Returning information for job: 20181025023225144987
2018-10-25 02:32:30,481 [salt.state       :905 ][INFO    ][3056] Loading fresh modules for state activity
2018-10-25 02:32:30,797 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-25 02:32:30,845 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-25 02:32:31,055 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-25 02:32:31,193 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-25 02:32:31,324 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-25 02:32:31,568 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-25 02:32:31,713 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-25 02:32:33,188 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-25 02:32:33,369 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-25 02:32:33,403 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-25 02:32:33,536 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-25 02:32:33,678 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-25 02:32:33,814 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-25 02:32:33,983 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-25 02:32:34,121 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-25 02:32:34,253 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-25 02:32:34,399 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-25 02:32:34,544 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-25 02:32:34,685 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-25 02:32:34,828 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-25 02:32:34,964 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-25 02:32:35,244 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023235239409
2018-10-25 02:32:35,262 [salt.minion      :1431][INFO    ][3110] Starting a new job with PID 3110
2018-10-25 02:32:35,289 [salt.minion      :1708][INFO    ][3110] Returning information for job: 20181025023235239409
2018-10-25 02:32:36,726 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-25 02:32:36,995 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-25 02:32:37,138 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-25 02:32:37,295 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-25 02:32:37,344 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-25 02:32:37,403 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-25 02:32:37,454 [salt.state       :1770][INFO    ][3056] Running state [/etc/environment] at time 02:32:37.454029
2018-10-25 02:32:37,454 [salt.state       :1803][INFO    ][3056] Executing state file.blockreplace for [/etc/environment]
2018-10-25 02:32:37,467 [salt.state       :290 ][INFO    ][3056] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-25 02:32:37,467 [salt.state       :1941][INFO    ][3056] Completed state [/etc/environment] at time 02:32:37.467364 duration_in_ms=13.336
2018-10-25 02:32:37,467 [salt.state       :1770][INFO    ][3056] Running state [/etc/profile.d] at time 02:32:37.467626
2018-10-25 02:32:37,467 [salt.state       :1803][INFO    ][3056] Executing state file.directory for [/etc/profile.d]
2018-10-25 02:32:37,510 [salt.state       :290 ][INFO    ][3056] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-25 02:32:37,511 [salt.state       :1941][INFO    ][3056] Completed state [/etc/profile.d] at time 02:32:37.511318 duration_in_ms=43.69
2018-10-25 02:32:38,374 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 02:32:38.374023
2018-10-25 02:32:38,374 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-25 02:32:38,406 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-25 02:32:38,425 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:32:38,425 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 02:32:38.425268 duration_in_ms=51.246
2018-10-25 02:32:38,425 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 02:32:38.425541
2018-10-25 02:32:38,425 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-25 02:32:38,452 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:32:38,452 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 02:32:38.452716 duration_in_ms=27.175
2018-10-25 02:32:38,454 [salt.state       :1770][INFO    ][3056] Running state [linux_repo_prereq_pkgs] at time 02:32:38.454511
2018-10-25 02:32:38,455 [salt.state       :1803][INFO    ][3056] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-25 02:32:38,455 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:32:38,889 [salt.state       :290 ][INFO    ][3056] All specified packages are already installed
2018-10-25 02:32:38,890 [salt.state       :1941][INFO    ][3056] Completed state [linux_repo_prereq_pkgs] at time 02:32:38.889923 duration_in_ms=435.411
2018-10-25 02:32:38,890 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 02:32:38.890351
2018-10-25 02:32:38,890 [salt.state       :1803][INFO    ][3056] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-25 02:32:38,891 [salt.state       :290 ][INFO    ][3056] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-25 02:32:38,891 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 02:32:38.891783 duration_in_ms=1.432
2018-10-25 02:32:38,892 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 02:32:38.892031
2018-10-25 02:32:38,892 [salt.state       :1803][INFO    ][3056] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-25 02:32:38,892 [salt.state       :290 ][INFO    ][3056] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-25 02:32:38,893 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 02:32:38.893069 duration_in_ms=1.037
2018-10-25 02:32:38,893 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 02:32:38.893328
2018-10-25 02:32:38,893 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-25 02:32:40,220 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-25 02:32:40,349 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:32:40,350 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 02:32:40.350254 duration_in_ms=1456.925
2018-10-25 02:32:40,355 [salt.state       :1770][INFO    ][3056] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 02:32:40.355201
2018-10-25 02:32:40,356 [salt.state       :1803][INFO    ][3056] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-25 02:32:40,701 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-25 02:32:41,068 [salt.state       :290 ][INFO    ][3056] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-25 02:32:41,069 [salt.state       :1941][INFO    ][3056] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 02:32:41.069070 duration_in_ms=713.869
2018-10-25 02:32:41,069 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 02:32:41.069767
2018-10-25 02:32:41,070 [salt.state       :1803][INFO    ][3056] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-25 02:32:41,071 [salt.state       :290 ][INFO    ][3056] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-25 02:32:41,071 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 02:32:41.071254 duration_in_ms=1.487
2018-10-25 02:32:41,071 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/preferences.d/uca] at time 02:32:41.071837
2018-10-25 02:32:41,072 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-25 02:32:41,227 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:32:41,227 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/preferences.d/uca] at time 02:32:41.227692 duration_in_ms=155.855
2018-10-25 02:32:41,229 [salt.state       :1770][INFO    ][3056] Running state [echo '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' | base64 -d | apt-key add -] at time 02:32:41.229362
2018-10-25 02:32:41,229 [salt.state       :1803][INFO    ][3056] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-25 02:32:41,230 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-25 02:32:41,487 [salt.state       :290 ][INFO    ][3056] {'pid': 3282, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-25 02:32:41,489 [salt.state       :1941][INFO    ][3056] Completed state [echo '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' | base64 -d | apt-key add -] at time 02:32:41.489037 duration_in_ms=259.674
2018-10-25 02:32:41,497 [salt.state       :1770][INFO    ][3056] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 02:32:41.497199
2018-10-25 02:32:41,497 [salt.state       :1803][INFO    ][3056] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-25 02:32:41,669 [salt.state       :290 ][INFO    ][3056] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-25 02:32:41,670 [salt.state       :1941][INFO    ][3056] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 02:32:41.669996 duration_in_ms=172.797
2018-10-25 02:32:41,671 [salt.state       :1770][INFO    ][3056] Running state [pkg.refresh_db] at time 02:32:41.671755
2018-10-25 02:32:41,672 [salt.state       :1803][INFO    ][3056] Executing state module.run for [pkg.refresh_db]
2018-10-25 02:32:41,672 [salt.utils.decorators:613 ][WARNING ][3056] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-25 02:32:41,673 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 02:32:45,426 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023245415621
2018-10-25 02:32:45,453 [salt.minion      :1431][INFO    ][3760] Starting a new job with PID 3760
2018-10-25 02:32:45,476 [salt.minion      :1708][INFO    ][3760] Returning information for job: 20181025023245415621
2018-10-25 02:32:46,540 [salt.state       :290 ][INFO    ][3056] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-25 02:32:46,542 [salt.state       :1941][INFO    ][3056] Completed state [pkg.refresh_db] at time 02:32:46.542787 duration_in_ms=4871.031
2018-10-25 02:32:46,543 [salt.state       :1770][INFO    ][3056] Running state [linux_extra_packages_latest] at time 02:32:46.543511
2018-10-25 02:32:46,544 [salt.state       :1803][INFO    ][3056] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-25 02:32:46,562 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-25 02:32:46,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:32:46,769 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-25 02:32:50,677 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:32:50,735 [salt.state       :290 ][INFO    ][3056] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-25 02:32:50,769 [salt.state       :905 ][INFO    ][3056] Loading fresh modules for state activity
2018-10-25 02:32:50,831 [salt.state       :1941][INFO    ][3056] Completed state [linux_extra_packages_latest] at time 02:32:50.831082 duration_in_ms=4287.571
2018-10-25 02:32:50,839 [salt.state       :1770][INFO    ][3056] Running state [UTC] at time 02:32:50.839297
2018-10-25 02:32:50,839 [salt.state       :1803][INFO    ][3056] Executing state timezone.system for [UTC]
2018-10-25 02:32:50,845 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['timedatectl'] in directory '/root'
2018-10-25 02:32:50,971 [salt.state       :290 ][INFO    ][3056] Timezone UTC already set, UTC already set to UTC
2018-10-25 02:32:50,972 [salt.state       :1941][INFO    ][3056] Completed state [UTC] at time 02:32:50.972858 duration_in_ms=133.561
2018-10-25 02:32:50,977 [salt.state       :1770][INFO    ][3056] Running state [/etc/default/grub.d] at time 02:32:50.977239
2018-10-25 02:32:50,977 [salt.state       :1803][INFO    ][3056] Executing state file.directory for [/etc/default/grub.d]
2018-10-25 02:32:50,987 [salt.state       :290 ][INFO    ][3056] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-25 02:32:50,988 [salt.state       :1941][INFO    ][3056] Completed state [/etc/default/grub.d] at time 02:32:50.988363 duration_in_ms=11.124
2018-10-25 02:32:50,995 [salt.state       :1770][INFO    ][3056] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 02:32:50.995290
2018-10-25 02:32:50,995 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-25 02:32:51,055 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:32:51,055 [salt.state       :1941][INFO    ][3056] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 02:32:51.055255 duration_in_ms=59.964
2018-10-25 02:32:51,056 [salt.state       :1770][INFO    ][3056] Running state [update-grub] at time 02:32:51.056600
2018-10-25 02:32:51,057 [salt.state       :1803][INFO    ][3056] Executing state cmd.wait for [update-grub]
2018-10-25 02:32:51,058 [salt.state       :290 ][INFO    ][3056] No changes made for update-grub
2018-10-25 02:32:51,058 [salt.state       :1941][INFO    ][3056] Completed state [update-grub] at time 02:32:51.058484 duration_in_ms=1.884
2018-10-25 02:32:51,058 [salt.state       :1770][INFO    ][3056] Running state [update-grub] at time 02:32:51.058794
2018-10-25 02:32:51,059 [salt.state       :1803][INFO    ][3056] Executing state cmd.mod_watch for [update-grub]
2018-10-25 02:32:51,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'update-grub' in directory '/root'
2018-10-25 02:32:52,466 [salt.state       :290 ][INFO    ][3056] {'pid': 3930, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-36-generic\nFound initrd image: /boot/initrd.img-4.15.0-36-generic\nFound linux image: /boot/vmlinuz-4.4.0-137-generic\nFound initrd image: /boot/initrd.img-4.4.0-137-generic\ndone', 'stdout': ''}
2018-10-25 02:32:52,466 [salt.state       :1941][INFO    ][3056] Completed state [update-grub] at time 02:32:52.466798 duration_in_ms=1408.004
2018-10-25 02:32:52,472 [salt.state       :1770][INFO    ][3056] Running state [nf_conntrack] at time 02:32:52.472903
2018-10-25 02:32:52,473 [salt.state       :1803][INFO    ][3056] Executing state kmod.present for [nf_conntrack]
2018-10-25 02:32:52,475 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'lsmod' in directory '/root'
2018-10-25 02:32:53,135 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'lsmod' in directory '/root'
2018-10-25 02:32:53,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-25 02:32:53,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'lsmod' in directory '/root'
2018-10-25 02:32:53,385 [salt.state       :290 ][INFO    ][3056] {'nf_conntrack': 'loaded'}
2018-10-25 02:32:53,385 [salt.state       :1941][INFO    ][3056] Completed state [nf_conntrack] at time 02:32:53.385492 duration_in_ms=912.588
2018-10-25 02:32:53,389 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_keepalive_probes] at time 02:32:53.389628
2018-10-25 02:32:53,389 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-25 02:32:53,391 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-25 02:32:53,410 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-25 02:32:53,410 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_keepalive_probes] at time 02:32:53.410817 duration_in_ms=21.189
2018-10-25 02:32:53,411 [salt.state       :1770][INFO    ][3056] Running state [fs.file-max] at time 02:32:53.411523
2018-10-25 02:32:53,411 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [fs.file-max]
2018-10-25 02:32:53,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-25 02:32:53,429 [salt.state       :290 ][INFO    ][3056] {'fs.file-max': 124165}
2018-10-25 02:32:53,430 [salt.state       :1941][INFO    ][3056] Completed state [fs.file-max] at time 02:32:53.430054 duration_in_ms=18.531
2018-10-25 02:32:53,430 [salt.state       :1770][INFO    ][3056] Running state [net.core.somaxconn] at time 02:32:53.430493
2018-10-25 02:32:53,430 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.core.somaxconn]
2018-10-25 02:32:53,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-25 02:32:53,446 [salt.state       :290 ][INFO    ][3056] {'net.core.somaxconn': 4096}
2018-10-25 02:32:53,447 [salt.state       :1941][INFO    ][3056] Completed state [net.core.somaxconn] at time 02:32:53.447183 duration_in_ms=16.69
2018-10-25 02:32:53,447 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_max_syn_backlog] at time 02:32:53.447889
2018-10-25 02:32:53,448 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-25 02:32:53,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-25 02:32:53,462 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-25 02:32:53,463 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_max_syn_backlog] at time 02:32:53.463149 duration_in_ms=15.26
2018-10-25 02:32:53,463 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_tw_reuse] at time 02:32:53.463557
2018-10-25 02:32:53,463 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-25 02:32:53,466 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-25 02:32:53,480 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-25 02:32:53,481 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_tw_reuse] at time 02:32:53.480943 duration_in_ms=17.386
2018-10-25 02:32:53,481 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_congestion_control] at time 02:32:53.481359
2018-10-25 02:32:53,481 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-25 02:32:53,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-25 02:32:53,507 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-25 02:32:53,507 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_congestion_control] at time 02:32:53.507840 duration_in_ms=26.481
2018-10-25 02:32:53,509 [salt.state       :1770][INFO    ][3056] Running state [net.nf_conntrack_max] at time 02:32:53.509911
2018-10-25 02:32:53,510 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-25 02:32:53,512 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-25 02:32:53,529 [salt.state       :290 ][INFO    ][3056] {'net.nf_conntrack_max': 1048576}
2018-10-25 02:32:53,530 [salt.state       :1941][INFO    ][3056] Completed state [net.nf_conntrack_max] at time 02:32:53.530059 duration_in_ms=20.148
2018-10-25 02:32:53,531 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_retries2] at time 02:32:53.531314
2018-10-25 02:32:53,531 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-25 02:32:53,534 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-25 02:32:53,547 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_retries2': 5}
2018-10-25 02:32:53,548 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_retries2] at time 02:32:53.548613 duration_in_ms=17.299
2018-10-25 02:32:53,549 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_fin_timeout] at time 02:32:53.549580
2018-10-25 02:32:53,550 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-25 02:32:53,551 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-25 02:32:53,573 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-25 02:32:53,574 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_fin_timeout] at time 02:32:53.574690 duration_in_ms=25.11
2018-10-25 02:32:53,575 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_slow_start_after_idle] at time 02:32:53.575904
2018-10-25 02:32:53,577 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-25 02:32:53,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-25 02:32:53,600 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-25 02:32:53,601 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 02:32:53.601281 duration_in_ms=25.378
2018-10-25 02:32:53,602 [salt.state       :1770][INFO    ][3056] Running state [vm.swappiness] at time 02:32:53.601969
2018-10-25 02:32:53,602 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [vm.swappiness]
2018-10-25 02:32:53,604 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-25 02:32:53,621 [salt.state       :290 ][INFO    ][3056] {'vm.swappiness': 10}
2018-10-25 02:32:53,622 [salt.state       :1941][INFO    ][3056] Completed state [vm.swappiness] at time 02:32:53.622358 duration_in_ms=20.389
2018-10-25 02:32:53,623 [salt.state       :1770][INFO    ][3056] Running state [net.core.netdev_max_backlog] at time 02:32:53.623037
2018-10-25 02:32:53,623 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-25 02:32:53,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-25 02:32:53,649 [salt.state       :290 ][INFO    ][3056] {'net.core.netdev_max_backlog': 261144}
2018-10-25 02:32:53,650 [salt.state       :1941][INFO    ][3056] Completed state [net.core.netdev_max_backlog] at time 02:32:53.649945 duration_in_ms=26.908
2018-10-25 02:32:53,650 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.neigh.default.gc_thresh1] at time 02:32:53.650642
2018-10-25 02:32:53,651 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-25 02:32:53,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-25 02:32:53,677 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-25 02:32:53,677 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 02:32:53.677790 duration_in_ms=27.148
2018-10-25 02:32:53,678 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.neigh.default.gc_thresh2] at time 02:32:53.678484
2018-10-25 02:32:53,679 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-25 02:32:53,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-25 02:32:53,701 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-25 02:32:53,701 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 02:32:53.701849 duration_in_ms=23.365
2018-10-25 02:32:53,702 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.neigh.default.gc_thresh3] at time 02:32:53.702587
2018-10-25 02:32:53,703 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-25 02:32:53,708 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-25 02:32:53,726 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-25 02:32:53,727 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 02:32:53.727338 duration_in_ms=24.75
2018-10-25 02:32:53,728 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_keepalive_intvl] at time 02:32:53.728040
2018-10-25 02:32:53,729 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-25 02:32:53,732 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-25 02:32:53,748 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-25 02:32:53,749 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_keepalive_intvl] at time 02:32:53.749442 duration_in_ms=21.402
2018-10-25 02:32:53,750 [salt.state       :1770][INFO    ][3056] Running state [net.ipv4.tcp_keepalive_time] at time 02:32:53.750470
2018-10-25 02:32:53,751 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-25 02:32:53,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-25 02:32:53,772 [salt.state       :290 ][INFO    ][3056] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-25 02:32:53,773 [salt.state       :1941][INFO    ][3056] Completed state [net.ipv4.tcp_keepalive_time] at time 02:32:53.773601 duration_in_ms=23.13
2018-10-25 02:32:53,774 [salt.state       :1770][INFO    ][3056] Running state [kernel.panic] at time 02:32:53.774311
2018-10-25 02:32:53,774 [salt.state       :1803][INFO    ][3056] Executing state sysctl.present for [kernel.panic]
2018-10-25 02:32:53,778 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-25 02:32:53,794 [salt.state       :290 ][INFO    ][3056] {'kernel.panic': 60}
2018-10-25 02:32:53,795 [salt.state       :1941][INFO    ][3056] Completed state [kernel.panic] at time 02:32:53.795435 duration_in_ms=21.124
2018-10-25 02:32:53,804 [salt.state       :1770][INFO    ][3056] Running state [linux_sysfs_package] at time 02:32:53.804913
2018-10-25 02:32:53,805 [salt.state       :1803][INFO    ][3056] Executing state pkg.installed for [linux_sysfs_package]
2018-10-25 02:32:54,795 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-25 02:32:54,958 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 02:32:55,640 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023255630647
2018-10-25 02:32:55,662 [salt.minion      :1431][INFO    ][4682] Starting a new job with PID 4682
2018-10-25 02:32:55,684 [salt.minion      :1708][INFO    ][4682] Returning information for job: 20181025023255630647
2018-10-25 02:32:57,197 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:32:57,231 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-25 02:33:02,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:33:02,797 [salt.state       :290 ][INFO    ][3056] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-25 02:33:02,819 [salt.state       :905 ][INFO    ][3056] Loading fresh modules for state activity
2018-10-25 02:33:02,870 [salt.state       :1941][INFO    ][3056] Completed state [linux_sysfs_package] at time 02:33:02.870612 duration_in_ms=9065.698
2018-10-25 02:33:02,878 [salt.state       :1770][INFO    ][3056] Running state [/etc/sysfs.d] at time 02:33:02.878829
2018-10-25 02:33:02,879 [salt.state       :1803][INFO    ][3056] Executing state file.directory for [/etc/sysfs.d]
2018-10-25 02:33:02,886 [salt.state       :290 ][INFO    ][3056] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-25 02:33:02,887 [salt.state       :1941][INFO    ][3056] Completed state [/etc/sysfs.d] at time 02:33:02.887673 duration_in_ms=8.844
2018-10-25 02:33:03,549 [salt.state       :1770][INFO    ][3056] Running state [ondemand] at time 02:33:03.549716
2018-10-25 02:33:03,550 [salt.state       :1803][INFO    ][3056] Executing state service.dead for [ondemand]
2018-10-25 02:33:03,552 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-25 02:33:03,577 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-25 02:33:03,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-25 02:33:03,622 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-25 02:33:03,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-25 02:33:03,731 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-25 02:33:03,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-25 02:33:03,802 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-25 02:33:04,022 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-25 02:33:04,057 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'runlevel' in directory '/root'
2018-10-25 02:33:04,078 [salt.state       :290 ][INFO    ][3056] {'ondemand': True}
2018-10-25 02:33:04,080 [salt.state       :1941][INFO    ][3056] Completed state [ondemand] at time 02:33:04.080081 duration_in_ms=530.366
2018-10-25 02:33:04,082 [salt.state       :1770][INFO    ][3056] Running state [en_US.UTF-8] at time 02:33:04.082938
2018-10-25 02:33:04,083 [salt.state       :1803][INFO    ][3056] Executing state locale.present for [en_US.UTF-8]
2018-10-25 02:33:04,085 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'locale -a' in directory '/root'
2018-10-25 02:33:04,103 [salt.state       :290 ][INFO    ][3056] Locale en_US.UTF-8 is already present
2018-10-25 02:33:04,104 [salt.state       :1941][INFO    ][3056] Completed state [en_US.UTF-8] at time 02:33:04.104110 duration_in_ms=21.171
2018-10-25 02:33:04,107 [salt.state       :1770][INFO    ][3056] Running state [en_US.UTF-8] at time 02:33:04.107113
2018-10-25 02:33:04,108 [salt.state       :1803][INFO    ][3056] Executing state locale.system for [en_US.UTF-8]
2018-10-25 02:33:04,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'localectl' in directory '/root'
2018-10-25 02:33:04,170 [salt.state       :290 ][INFO    ][3056] System locale en_US.UTF-8 already set
2018-10-25 02:33:04,171 [salt.state       :1941][INFO    ][3056] Completed state [en_US.UTF-8] at time 02:33:04.171769 duration_in_ms=64.655
2018-10-25 02:33:04,173 [salt.state       :1770][INFO    ][3056] Running state [root] at time 02:33:04.173261
2018-10-25 02:33:04,175 [salt.state       :1803][INFO    ][3056] Executing state group.present for [root]
2018-10-25 02:33:04,176 [salt.state       :290 ][INFO    ][3056] Group root is present and up to date
2018-10-25 02:33:04,177 [salt.state       :1941][INFO    ][3056] Completed state [root] at time 02:33:04.177587 duration_in_ms=4.326
2018-10-25 02:33:04,181 [salt.state       :1770][INFO    ][3056] Running state [root] at time 02:33:04.181667
2018-10-25 02:33:04,182 [salt.state       :1803][INFO    ][3056] Executing state user.present for [root]
2018-10-25 02:33:04,188 [salt.state       :290 ][INFO    ][3056] User root is present and up to date
2018-10-25 02:33:04,188 [salt.state       :1941][INFO    ][3056] Completed state [root] at time 02:33:04.188391 duration_in_ms=6.724
2018-10-25 02:33:04,191 [salt.state       :1770][INFO    ][3056] Running state [/root] at time 02:33:04.191322
2018-10-25 02:33:04,191 [salt.state       :1803][INFO    ][3056] Executing state file.directory for [/root]
2018-10-25 02:33:04,192 [salt.state       :290 ][INFO    ][3056] Directory /root is in the correct state
Directory /root updated
2018-10-25 02:33:04,193 [salt.state       :1941][INFO    ][3056] Completed state [/root] at time 02:33:04.193014 duration_in_ms=1.692
2018-10-25 02:33:04,193 [salt.state       :1770][INFO    ][3056] Running state [/etc/sudoers.d/90-salt-user-root] at time 02:33:04.193258
2018-10-25 02:33:04,193 [salt.state       :1803][INFO    ][3056] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-25 02:33:04,193 [salt.state       :290 ][INFO    ][3056] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-25 02:33:04,194 [salt.state       :1941][INFO    ][3056] Completed state [/etc/sudoers.d/90-salt-user-root] at time 02:33:04.194020 duration_in_ms=0.763
2018-10-25 02:33:04,194 [salt.state       :1770][INFO    ][3056] Running state [ubuntu] at time 02:33:04.194284
2018-10-25 02:33:04,194 [salt.state       :1803][INFO    ][3056] Executing state group.present for [ubuntu]
2018-10-25 02:33:04,194 [salt.state       :290 ][INFO    ][3056] Group ubuntu is present and up to date
2018-10-25 02:33:04,195 [salt.state       :1941][INFO    ][3056] Completed state [ubuntu] at time 02:33:04.195394 duration_in_ms=1.11
2018-10-25 02:33:04,196 [salt.state       :1770][INFO    ][3056] Running state [ubuntu] at time 02:33:04.196352
2018-10-25 02:33:04,196 [salt.state       :1803][INFO    ][3056] Executing state user.present for [ubuntu]
2018-10-25 02:33:04,203 [salt.state       :290 ][INFO    ][3056] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-25 02:33:04,203 [salt.state       :1941][INFO    ][3056] Completed state [ubuntu] at time 02:33:04.203748 duration_in_ms=7.395
2018-10-25 02:33:04,205 [salt.state       :1770][INFO    ][3056] Running state [/home/ubuntu] at time 02:33:04.205218
2018-10-25 02:33:04,205 [salt.state       :1803][INFO    ][3056] Executing state file.directory for [/home/ubuntu]
2018-10-25 02:33:04,206 [salt.state       :290 ][INFO    ][3056] {'mode': '0700'}
2018-10-25 02:33:04,206 [salt.state       :1941][INFO    ][3056] Completed state [/home/ubuntu] at time 02:33:04.206811 duration_in_ms=1.593
2018-10-25 02:33:04,208 [salt.state       :1770][INFO    ][3056] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 02:33:04.208101
2018-10-25 02:33:04,208 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-25 02:33:04,234 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-25 02:33:04,252 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.1Iryrc' in directory '/root'
2018-10-25 02:33:04,287 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:33:04,288 [salt.state       :1941][INFO    ][3056] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 02:33:04.288088 duration_in_ms=79.986
2018-10-25 02:33:04,288 [salt.state       :1770][INFO    ][3056] Running state [/etc/security/limits.d/90-salt-default.conf] at time 02:33:04.288665
2018-10-25 02:33:04,290 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-25 02:33:04,315 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-25 02:33:04,435 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:33:04,436 [salt.state       :1941][INFO    ][3056] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 02:33:04.436385 duration_in_ms=147.719
2018-10-25 02:33:04,436 [salt.state       :1770][INFO    ][3056] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 02:33:04.436672
2018-10-25 02:33:04,437 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-25 02:33:04,460 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-25 02:33:04,588 [salt.state       :290 ][INFO    ][3056] File changed:
New file
2018-10-25 02:33:04,589 [salt.state       :1941][INFO    ][3056] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 02:33:04.589060 duration_in_ms=152.388
2018-10-25 02:33:04,591 [salt.state       :1770][INFO    ][3056] Running state [service.systemctl_reload] at time 02:33:04.591402
2018-10-25 02:33:04,591 [salt.state       :1803][INFO    ][3056] Executing state module.wait for [service.systemctl_reload]
2018-10-25 02:33:04,591 [salt.state       :290 ][INFO    ][3056] No changes made for service.systemctl_reload
2018-10-25 02:33:04,592 [salt.state       :1941][INFO    ][3056] Completed state [service.systemctl_reload] at time 02:33:04.592148 duration_in_ms=0.747
2018-10-25 02:33:04,592 [salt.state       :1770][INFO    ][3056] Running state [service.systemctl_reload] at time 02:33:04.592351
2018-10-25 02:33:04,592 [salt.state       :1803][INFO    ][3056] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-25 02:33:04,592 [salt.utils.decorators:613 ][WARNING ][3056] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-25 02:33:04,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-25 02:33:04,762 [salt.state       :290 ][INFO    ][3056] {'ret': True}
2018-10-25 02:33:04,763 [salt.state       :1941][INFO    ][3056] Completed state [service.systemctl_reload] at time 02:33:04.763655 duration_in_ms=171.303
2018-10-25 02:33:04,764 [salt.state       :1770][INFO    ][3056] Running state [/etc/issue] at time 02:33:04.764154
2018-10-25 02:33:04,765 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/issue]
2018-10-25 02:33:04,769 [salt.state       :290 ][INFO    ][3056] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-25 02:33:04,769 [salt.state       :1941][INFO    ][3056] Completed state [/etc/issue] at time 02:33:04.769450 duration_in_ms=5.296
2018-10-25 02:33:04,769 [salt.state       :1770][INFO    ][3056] Running state [/etc/hostname] at time 02:33:04.769717
2018-10-25 02:33:04,770 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/hostname]
2018-10-25 02:33:04,796 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-25 02:33:04,814 [salt.state       :290 ][INFO    ][3056] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-10-25 02:33:04,814 [salt.state       :1941][INFO    ][3056] Completed state [/etc/hostname] at time 02:33:04.814368 duration_in_ms=44.651
2018-10-25 02:33:04,818 [salt.state       :1770][INFO    ][3056] Running state [hostname mdb01] at time 02:33:04.818876
2018-10-25 02:33:04,819 [salt.state       :1803][INFO    ][3056] Executing state cmd.run for [hostname mdb01]
2018-10-25 02:33:04,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-10-25 02:33:04,843 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command 'hostname mdb01' in directory '/root'
2018-10-25 02:33:04,864 [salt.state       :290 ][INFO    ][3056] {'pid': 5342, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-25 02:33:04,865 [salt.state       :1941][INFO    ][3056] Completed state [hostname mdb01] at time 02:33:04.865224 duration_in_ms=46.348
2018-10-25 02:33:04,867 [salt.state       :1770][INFO    ][3056] Running state [mdb02] at time 02:33:04.867349
2018-10-25 02:33:04,867 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb02]
2018-10-25 02:33:04,871 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb02'}
2018-10-25 02:33:04,872 [salt.state       :1941][INFO    ][3056] Completed state [mdb02] at time 02:33:04.871991 duration_in_ms=4.642
2018-10-25 02:33:04,872 [salt.state       :1770][INFO    ][3056] Running state [mdb02.mcp-ovs-ha.local] at time 02:33:04.872346
2018-10-25 02:33:04,872 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb02.mcp-ovs-ha.local]
2018-10-25 02:33:04,970 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb02.mcp-ovs-ha.local'}
2018-10-25 02:33:04,970 [salt.state       :1941][INFO    ][3056] Completed state [mdb02.mcp-ovs-ha.local] at time 02:33:04.970728 duration_in_ms=98.381
2018-10-25 02:33:04,971 [salt.state       :1770][INFO    ][3056] Running state [mdb03] at time 02:33:04.971128
2018-10-25 02:33:04,971 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb03]
2018-10-25 02:33:05,028 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb03'}
2018-10-25 02:33:05,028 [salt.state       :1941][INFO    ][3056] Completed state [mdb03] at time 02:33:05.028408 duration_in_ms=57.28
2018-10-25 02:33:05,029 [salt.state       :1770][INFO    ][3056] Running state [mdb03.mcp-ovs-ha.local] at time 02:33:05.029370
2018-10-25 02:33:05,029 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb03.mcp-ovs-ha.local]
2018-10-25 02:33:05,036 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb03.mcp-ovs-ha.local'}
2018-10-25 02:33:05,036 [salt.state       :1941][INFO    ][3056] Completed state [mdb03.mcp-ovs-ha.local] at time 02:33:05.036329 duration_in_ms=6.958
2018-10-25 02:33:05,037 [salt.state       :1770][INFO    ][3056] Running state [mdb01] at time 02:33:05.037273
2018-10-25 02:33:05,037 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb01]
2018-10-25 02:33:05,038 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb01'}
2018-10-25 02:33:05,038 [salt.state       :1941][INFO    ][3056] Completed state [mdb01] at time 02:33:05.038744 duration_in_ms=1.471
2018-10-25 02:33:05,039 [salt.state       :1770][INFO    ][3056] Running state [mdb01.mcp-ovs-ha.local] at time 02:33:05.039054
2018-10-25 02:33:05,039 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb01.mcp-ovs-ha.local]
2018-10-25 02:33:05,041 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,041 [salt.state       :1941][INFO    ][3056] Completed state [mdb01.mcp-ovs-ha.local] at time 02:33:05.041631 duration_in_ms=2.577
2018-10-25 02:33:05,041 [salt.state       :1770][INFO    ][3056] Running state [mdb] at time 02:33:05.041954
2018-10-25 02:33:05,042 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb]
2018-10-25 02:33:05,043 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb'}
2018-10-25 02:33:05,043 [salt.state       :1941][INFO    ][3056] Completed state [mdb] at time 02:33:05.043697 duration_in_ms=1.743
2018-10-25 02:33:05,044 [salt.state       :1770][INFO    ][3056] Running state [mdb.mcp-ovs-ha.local] at time 02:33:05.044009
2018-10-25 02:33:05,044 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mdb.mcp-ovs-ha.local]
2018-10-25 02:33:05,048 [salt.state       :290 ][INFO    ][3056] {'host': 'mdb.mcp-ovs-ha.local'}
2018-10-25 02:33:05,048 [salt.state       :1941][INFO    ][3056] Completed state [mdb.mcp-ovs-ha.local] at time 02:33:05.048805 duration_in_ms=4.795
2018-10-25 02:33:05,049 [salt.state       :1770][INFO    ][3056] Running state [cfg01] at time 02:33:05.049129
2018-10-25 02:33:05,049 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cfg01]
2018-10-25 02:33:05,050 [salt.state       :290 ][INFO    ][3056] {'host': 'cfg01'}
2018-10-25 02:33:05,051 [salt.state       :1941][INFO    ][3056] Completed state [cfg01] at time 02:33:05.051131 duration_in_ms=2.002
2018-10-25 02:33:05,051 [salt.state       :1770][INFO    ][3056] Running state [cfg01.mcp-ovs-ha.local] at time 02:33:05.051442
2018-10-25 02:33:05,051 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-25 02:33:05,052 [salt.state       :290 ][INFO    ][3056] {'host': 'cfg01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,053 [salt.state       :1941][INFO    ][3056] Completed state [cfg01.mcp-ovs-ha.local] at time 02:33:05.053131 duration_in_ms=1.689
2018-10-25 02:33:05,053 [salt.state       :1770][INFO    ][3056] Running state [prx01] at time 02:33:05.053444
2018-10-25 02:33:05,053 [salt.state       :1803][INFO    ][3056] Executing state host.present for [prx01]
2018-10-25 02:33:05,054 [salt.state       :290 ][INFO    ][3056] {'host': 'prx01'}
2018-10-25 02:33:05,054 [salt.state       :1941][INFO    ][3056] Completed state [prx01] at time 02:33:05.054858 duration_in_ms=1.414
2018-10-25 02:33:05,055 [salt.state       :1770][INFO    ][3056] Running state [prx01.mcp-ovs-ha.local] at time 02:33:05.055451
2018-10-25 02:33:05,055 [salt.state       :1803][INFO    ][3056] Executing state host.present for [prx01.mcp-ovs-ha.local]
2018-10-25 02:33:05,057 [salt.state       :290 ][INFO    ][3056] {'host': 'prx01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,057 [salt.state       :1941][INFO    ][3056] Completed state [prx01.mcp-ovs-ha.local] at time 02:33:05.057434 duration_in_ms=1.982
2018-10-25 02:33:05,057 [salt.state       :1770][INFO    ][3056] Running state [kvm01] at time 02:33:05.057745
2018-10-25 02:33:05,058 [salt.state       :1803][INFO    ][3056] Executing state host.present for [kvm01]
2018-10-25 02:33:05,059 [salt.state       :290 ][INFO    ][3056] {'host': 'kvm01'}
2018-10-25 02:33:05,059 [salt.state       :1941][INFO    ][3056] Completed state [kvm01] at time 02:33:05.059759 duration_in_ms=2.014
2018-10-25 02:33:05,060 [salt.state       :1770][INFO    ][3056] Running state [kvm01.mcp-ovs-ha.local] at time 02:33:05.060066
2018-10-25 02:33:05,060 [salt.state       :1803][INFO    ][3056] Executing state host.present for [kvm01.mcp-ovs-ha.local]
2018-10-25 02:33:05,061 [salt.state       :290 ][INFO    ][3056] {'host': 'kvm01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,061 [salt.state       :1941][INFO    ][3056] Completed state [kvm01.mcp-ovs-ha.local] at time 02:33:05.061775 duration_in_ms=1.709
2018-10-25 02:33:05,062 [salt.state       :1770][INFO    ][3056] Running state [kvm03] at time 02:33:05.062090
2018-10-25 02:33:05,062 [salt.state       :1803][INFO    ][3056] Executing state host.present for [kvm03]
2018-10-25 02:33:05,063 [salt.state       :290 ][INFO    ][3056] {'host': 'kvm03'}
2018-10-25 02:33:05,064 [salt.state       :1941][INFO    ][3056] Completed state [kvm03] at time 02:33:05.064078 duration_in_ms=1.988
2018-10-25 02:33:05,064 [salt.state       :1770][INFO    ][3056] Running state [kvm03.mcp-ovs-ha.local] at time 02:33:05.064387
2018-10-25 02:33:05,064 [salt.state       :1803][INFO    ][3056] Executing state host.present for [kvm03.mcp-ovs-ha.local]
2018-10-25 02:33:05,065 [salt.state       :290 ][INFO    ][3056] {'host': 'kvm03.mcp-ovs-ha.local'}
2018-10-25 02:33:05,066 [salt.state       :1941][INFO    ][3056] Completed state [kvm03.mcp-ovs-ha.local] at time 02:33:05.066099 duration_in_ms=1.712
2018-10-25 02:33:05,066 [salt.state       :1770][INFO    ][3056] Running state [kvm02] at time 02:33:05.066437
2018-10-25 02:33:05,066 [salt.state       :1803][INFO    ][3056] Executing state host.present for [kvm02]
2018-10-25 02:33:05,067 [salt.state       :290 ][INFO    ][3056] {'host': 'kvm02'}
2018-10-25 02:33:05,068 [salt.state       :1941][INFO    ][3056] Completed state [kvm02] at time 02:33:05.068143 duration_in_ms=1.706
2018-10-25 02:33:05,068 [salt.state       :1770][INFO    ][3056] Running state [kvm02.mcp-ovs-ha.local] at time 02:33:05.068762
2018-10-25 02:33:05,069 [salt.state       :1803][INFO    ][3056] Executing state host.present for [kvm02.mcp-ovs-ha.local]
2018-10-25 02:33:05,070 [salt.state       :290 ][INFO    ][3056] {'host': 'kvm02.mcp-ovs-ha.local'}
2018-10-25 02:33:05,071 [salt.state       :1941][INFO    ][3056] Completed state [kvm02.mcp-ovs-ha.local] at time 02:33:05.071040 duration_in_ms=2.278
2018-10-25 02:33:05,071 [salt.state       :1770][INFO    ][3056] Running state [dbs] at time 02:33:05.071357
2018-10-25 02:33:05,071 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs]
2018-10-25 02:33:05,072 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs'}
2018-10-25 02:33:05,072 [salt.state       :1941][INFO    ][3056] Completed state [dbs] at time 02:33:05.072818 duration_in_ms=1.461
2018-10-25 02:33:05,073 [salt.state       :1770][INFO    ][3056] Running state [dbs.mcp-ovs-ha.local] at time 02:33:05.073129
2018-10-25 02:33:05,073 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs.mcp-ovs-ha.local]
2018-10-25 02:33:05,074 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs.mcp-ovs-ha.local'}
2018-10-25 02:33:05,074 [salt.state       :1941][INFO    ][3056] Completed state [dbs.mcp-ovs-ha.local] at time 02:33:05.074930 duration_in_ms=1.802
2018-10-25 02:33:05,075 [salt.state       :1770][INFO    ][3056] Running state [prx] at time 02:33:05.075249
2018-10-25 02:33:05,075 [salt.state       :1803][INFO    ][3056] Executing state host.present for [prx]
2018-10-25 02:33:05,077 [salt.state       :290 ][INFO    ][3056] {'host': 'prx'}
2018-10-25 02:33:05,077 [salt.state       :1941][INFO    ][3056] Completed state [prx] at time 02:33:05.077868 duration_in_ms=2.619
2018-10-25 02:33:05,078 [salt.state       :1770][INFO    ][3056] Running state [prx.mcp-ovs-ha.local] at time 02:33:05.078207
2018-10-25 02:33:05,078 [salt.state       :1803][INFO    ][3056] Executing state host.present for [prx.mcp-ovs-ha.local]
2018-10-25 02:33:05,079 [salt.state       :290 ][INFO    ][3056] {'host': 'prx.mcp-ovs-ha.local'}
2018-10-25 02:33:05,080 [salt.state       :1941][INFO    ][3056] Completed state [prx.mcp-ovs-ha.local] at time 02:33:05.079983 duration_in_ms=1.776
2018-10-25 02:33:05,080 [salt.state       :1770][INFO    ][3056] Running state [prx02] at time 02:33:05.080310
2018-10-25 02:33:05,080 [salt.state       :1803][INFO    ][3056] Executing state host.present for [prx02]
2018-10-25 02:33:05,081 [salt.state       :290 ][INFO    ][3056] {'host': 'prx02'}
2018-10-25 02:33:05,082 [salt.state       :1941][INFO    ][3056] Completed state [prx02] at time 02:33:05.082521 duration_in_ms=2.21
2018-10-25 02:33:05,082 [salt.state       :1770][INFO    ][3056] Running state [prx02.mcp-ovs-ha.local] at time 02:33:05.082840
2018-10-25 02:33:05,083 [salt.state       :1803][INFO    ][3056] Executing state host.present for [prx02.mcp-ovs-ha.local]
2018-10-25 02:33:05,084 [salt.state       :290 ][INFO    ][3056] {'host': 'prx02.mcp-ovs-ha.local'}
2018-10-25 02:33:05,084 [salt.state       :1941][INFO    ][3056] Completed state [prx02.mcp-ovs-ha.local] at time 02:33:05.084317 duration_in_ms=1.477
2018-10-25 02:33:05,084 [salt.state       :1770][INFO    ][3056] Running state [msg02] at time 02:33:05.084661
2018-10-25 02:33:05,085 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg02]
2018-10-25 02:33:05,086 [salt.state       :290 ][INFO    ][3056] {'host': 'msg02'}
2018-10-25 02:33:05,086 [salt.state       :1941][INFO    ][3056] Completed state [msg02] at time 02:33:05.086748 duration_in_ms=2.086
2018-10-25 02:33:05,087 [salt.state       :1770][INFO    ][3056] Running state [msg02.mcp-ovs-ha.local] at time 02:33:05.087922
2018-10-25 02:33:05,088 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg02.mcp-ovs-ha.local]
2018-10-25 02:33:05,089 [salt.state       :290 ][INFO    ][3056] {'host': 'msg02.mcp-ovs-ha.local'}
2018-10-25 02:33:05,090 [salt.state       :1941][INFO    ][3056] Completed state [msg02.mcp-ovs-ha.local] at time 02:33:05.090012 duration_in_ms=2.09
2018-10-25 02:33:05,090 [salt.state       :1770][INFO    ][3056] Running state [msg03] at time 02:33:05.090356
2018-10-25 02:33:05,090 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg03]
2018-10-25 02:33:05,091 [salt.state       :290 ][INFO    ][3056] {'host': 'msg03'}
2018-10-25 02:33:05,092 [salt.state       :1941][INFO    ][3056] Completed state [msg03] at time 02:33:05.092141 duration_in_ms=1.785
2018-10-25 02:33:05,092 [salt.state       :1770][INFO    ][3056] Running state [msg03.mcp-ovs-ha.local] at time 02:33:05.092475
2018-10-25 02:33:05,092 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg03.mcp-ovs-ha.local]
2018-10-25 02:33:05,093 [salt.state       :290 ][INFO    ][3056] {'host': 'msg03.mcp-ovs-ha.local'}
2018-10-25 02:33:05,094 [salt.state       :1941][INFO    ][3056] Completed state [msg03.mcp-ovs-ha.local] at time 02:33:05.094006 duration_in_ms=1.53
2018-10-25 02:33:05,094 [salt.state       :1770][INFO    ][3056] Running state [msg01] at time 02:33:05.094360
2018-10-25 02:33:05,094 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg01]
2018-10-25 02:33:05,096 [salt.state       :290 ][INFO    ][3056] {'host': 'msg01'}
2018-10-25 02:33:05,097 [salt.state       :1941][INFO    ][3056] Completed state [msg01] at time 02:33:05.097289 duration_in_ms=2.929
2018-10-25 02:33:05,097 [salt.state       :1770][INFO    ][3056] Running state [msg01.mcp-ovs-ha.local] at time 02:33:05.097625
2018-10-25 02:33:05,097 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg01.mcp-ovs-ha.local]
2018-10-25 02:33:05,098 [salt.state       :290 ][INFO    ][3056] {'host': 'msg01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,099 [salt.state       :1941][INFO    ][3056] Completed state [msg01.mcp-ovs-ha.local] at time 02:33:05.099180 duration_in_ms=1.555
2018-10-25 02:33:05,099 [salt.state       :1770][INFO    ][3056] Running state [msg] at time 02:33:05.099505
2018-10-25 02:33:05,099 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg]
2018-10-25 02:33:05,101 [salt.state       :290 ][INFO    ][3056] {'host': 'msg'}
2018-10-25 02:33:05,101 [salt.state       :1941][INFO    ][3056] Completed state [msg] at time 02:33:05.101628 duration_in_ms=2.122
2018-10-25 02:33:05,102 [salt.state       :1770][INFO    ][3056] Running state [msg.mcp-ovs-ha.local] at time 02:33:05.101964
2018-10-25 02:33:05,102 [salt.state       :1803][INFO    ][3056] Executing state host.present for [msg.mcp-ovs-ha.local]
2018-10-25 02:33:05,103 [salt.state       :290 ][INFO    ][3056] {'host': 'msg.mcp-ovs-ha.local'}
2018-10-25 02:33:05,104 [salt.state       :1941][INFO    ][3056] Completed state [msg.mcp-ovs-ha.local] at time 02:33:05.104127 duration_in_ms=2.163
2018-10-25 02:33:05,104 [salt.state       :1770][INFO    ][3056] Running state [cfg01] at time 02:33:05.104456
2018-10-25 02:33:05,105 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cfg01]
2018-10-25 02:33:05,105 [salt.state       :290 ][INFO    ][3056] Host cfg01 (192.168.10.11) already present
2018-10-25 02:33:05,105 [salt.state       :1941][INFO    ][3056] Completed state [cfg01] at time 02:33:05.105665 duration_in_ms=1.21
2018-10-25 02:33:05,106 [salt.state       :1770][INFO    ][3056] Running state [cfg01.mcp-ovs-ha.local] at time 02:33:05.105988
2018-10-25 02:33:05,106 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-25 02:33:05,106 [salt.state       :290 ][INFO    ][3056] Host cfg01.mcp-ovs-ha.local (192.168.10.11) already present
2018-10-25 02:33:05,106 [salt.state       :1941][INFO    ][3056] Completed state [cfg01.mcp-ovs-ha.local] at time 02:33:05.106905 duration_in_ms=0.917
2018-10-25 02:33:05,107 [salt.state       :1770][INFO    ][3056] Running state [cmp002] at time 02:33:05.107229
2018-10-25 02:33:05,107 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cmp002]
2018-10-25 02:33:05,108 [salt.state       :290 ][INFO    ][3056] {'host': 'cmp002'}
2018-10-25 02:33:05,109 [salt.state       :1941][INFO    ][3056] Completed state [cmp002] at time 02:33:05.109462 duration_in_ms=2.233
2018-10-25 02:33:05,109 [salt.state       :1770][INFO    ][3056] Running state [cmp002.mcp-ovs-ha.local] at time 02:33:05.109797
2018-10-25 02:33:05,110 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cmp002.mcp-ovs-ha.local]
2018-10-25 02:33:05,111 [salt.state       :290 ][INFO    ][3056] {'host': 'cmp002.mcp-ovs-ha.local'}
2018-10-25 02:33:05,111 [salt.state       :1941][INFO    ][3056] Completed state [cmp002.mcp-ovs-ha.local] at time 02:33:05.111399 duration_in_ms=1.602
2018-10-25 02:33:05,111 [salt.state       :1770][INFO    ][3056] Running state [cmp001] at time 02:33:05.111744
2018-10-25 02:33:05,112 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cmp001]
2018-10-25 02:33:05,113 [salt.state       :290 ][INFO    ][3056] {'host': 'cmp001'}
2018-10-25 02:33:05,113 [salt.state       :1941][INFO    ][3056] Completed state [cmp001] at time 02:33:05.113330 duration_in_ms=1.586
2018-10-25 02:33:05,113 [salt.state       :1770][INFO    ][3056] Running state [cmp001.mcp-ovs-ha.local] at time 02:33:05.113662
2018-10-25 02:33:05,114 [salt.state       :1803][INFO    ][3056] Executing state host.present for [cmp001.mcp-ovs-ha.local]
2018-10-25 02:33:05,115 [salt.state       :290 ][INFO    ][3056] {'host': 'cmp001.mcp-ovs-ha.local'}
2018-10-25 02:33:05,115 [salt.state       :1941][INFO    ][3056] Completed state [cmp001.mcp-ovs-ha.local] at time 02:33:05.115823 duration_in_ms=2.161
2018-10-25 02:33:05,116 [salt.state       :1770][INFO    ][3056] Running state [dbs01] at time 02:33:05.116159
2018-10-25 02:33:05,116 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs01]
2018-10-25 02:33:05,118 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs01'}
2018-10-25 02:33:05,118 [salt.state       :1941][INFO    ][3056] Completed state [dbs01] at time 02:33:05.118895 duration_in_ms=2.736
2018-10-25 02:33:05,119 [salt.state       :1770][INFO    ][3056] Running state [dbs01.mcp-ovs-ha.local] at time 02:33:05.119230
2018-10-25 02:33:05,119 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs01.mcp-ovs-ha.local]
2018-10-25 02:33:05,120 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,121 [salt.state       :1941][INFO    ][3056] Completed state [dbs01.mcp-ovs-ha.local] at time 02:33:05.121110 duration_in_ms=1.879
2018-10-25 02:33:05,121 [salt.state       :1770][INFO    ][3056] Running state [dbs02] at time 02:33:05.121447
2018-10-25 02:33:05,121 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs02]
2018-10-25 02:33:05,122 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs02'}
2018-10-25 02:33:05,123 [salt.state       :1941][INFO    ][3056] Completed state [dbs02] at time 02:33:05.123061 duration_in_ms=1.614
2018-10-25 02:33:05,123 [salt.state       :1770][INFO    ][3056] Running state [dbs02.mcp-ovs-ha.local] at time 02:33:05.123399
2018-10-25 02:33:05,123 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs02.mcp-ovs-ha.local]
2018-10-25 02:33:05,124 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs02.mcp-ovs-ha.local'}
2018-10-25 02:33:05,125 [salt.state       :1941][INFO    ][3056] Completed state [dbs02.mcp-ovs-ha.local] at time 02:33:05.125565 duration_in_ms=2.166
2018-10-25 02:33:05,126 [salt.state       :1770][INFO    ][3056] Running state [dbs03] at time 02:33:05.125915
2018-10-25 02:33:05,126 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs03]
2018-10-25 02:33:05,128 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs03'}
2018-10-25 02:33:05,128 [salt.state       :1941][INFO    ][3056] Completed state [dbs03] at time 02:33:05.128693 duration_in_ms=2.778
2018-10-25 02:33:05,129 [salt.state       :1770][INFO    ][3056] Running state [dbs03.mcp-ovs-ha.local] at time 02:33:05.129042
2018-10-25 02:33:05,129 [salt.state       :1803][INFO    ][3056] Executing state host.present for [dbs03.mcp-ovs-ha.local]
2018-10-25 02:33:05,130 [salt.state       :290 ][INFO    ][3056] {'host': 'dbs03.mcp-ovs-ha.local'}
2018-10-25 02:33:05,131 [salt.state       :1941][INFO    ][3056] Completed state [dbs03.mcp-ovs-ha.local] at time 02:33:05.131383 duration_in_ms=2.34
2018-10-25 02:33:05,131 [salt.state       :1770][INFO    ][3056] Running state [mas01] at time 02:33:05.131738
2018-10-25 02:33:05,132 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mas01]
2018-10-25 02:33:05,133 [salt.state       :290 ][INFO    ][3056] {'host': 'mas01'}
2018-10-25 02:33:05,133 [salt.state       :1941][INFO    ][3056] Completed state [mas01] at time 02:33:05.133657 duration_in_ms=1.919
2018-10-25 02:33:05,134 [salt.state       :1770][INFO    ][3056] Running state [mas01.mcp-ovs-ha.local] at time 02:33:05.134004
2018-10-25 02:33:05,134 [salt.state       :1803][INFO    ][3056] Executing state host.present for [mas01.mcp-ovs-ha.local]
2018-10-25 02:33:05,135 [salt.state       :290 ][INFO    ][3056] {'host': 'mas01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,136 [salt.state       :1941][INFO    ][3056] Completed state [mas01.mcp-ovs-ha.local] at time 02:33:05.136210 duration_in_ms=2.206
2018-10-25 02:33:05,137 [salt.state       :1770][INFO    ][3056] Running state [ctl02] at time 02:33:05.137130
2018-10-25 02:33:05,137 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl02]
2018-10-25 02:33:05,152 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl02'}
2018-10-25 02:33:05,152 [salt.state       :1941][INFO    ][3056] Completed state [ctl02] at time 02:33:05.152364 duration_in_ms=15.233
2018-10-25 02:33:05,153 [salt.state       :1770][INFO    ][3056] Running state [ctl02.mcp-ovs-ha.local] at time 02:33:05.153597
2018-10-25 02:33:05,153 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl02.mcp-ovs-ha.local]
2018-10-25 02:33:05,156 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl02.mcp-ovs-ha.local'}
2018-10-25 02:33:05,156 [salt.state       :1941][INFO    ][3056] Completed state [ctl02.mcp-ovs-ha.local] at time 02:33:05.156911 duration_in_ms=3.314
2018-10-25 02:33:05,157 [salt.state       :1770][INFO    ][3056] Running state [ctl03] at time 02:33:05.157651
2018-10-25 02:33:05,157 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl03]
2018-10-25 02:33:05,159 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl03'}
2018-10-25 02:33:05,160 [salt.state       :1941][INFO    ][3056] Completed state [ctl03] at time 02:33:05.160102 duration_in_ms=2.451
2018-10-25 02:33:05,160 [salt.state       :1770][INFO    ][3056] Running state [ctl03.mcp-ovs-ha.local] at time 02:33:05.160873
2018-10-25 02:33:05,161 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl03.mcp-ovs-ha.local]
2018-10-25 02:33:05,162 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl03.mcp-ovs-ha.local'}
2018-10-25 02:33:05,162 [salt.state       :1941][INFO    ][3056] Completed state [ctl03.mcp-ovs-ha.local] at time 02:33:05.162847 duration_in_ms=1.974
2018-10-25 02:33:05,163 [salt.state       :1770][INFO    ][3056] Running state [ctl01] at time 02:33:05.163264
2018-10-25 02:33:05,163 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl01]
2018-10-25 02:33:05,166 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl01'}
2018-10-25 02:33:05,167 [salt.state       :1941][INFO    ][3056] Completed state [ctl01] at time 02:33:05.167039 duration_in_ms=3.775
2018-10-25 02:33:05,167 [salt.state       :1770][INFO    ][3056] Running state [ctl01.mcp-ovs-ha.local] at time 02:33:05.167390
2018-10-25 02:33:05,167 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl01.mcp-ovs-ha.local]
2018-10-25 02:33:05,169 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl01.mcp-ovs-ha.local'}
2018-10-25 02:33:05,169 [salt.state       :1941][INFO    ][3056] Completed state [ctl01.mcp-ovs-ha.local] at time 02:33:05.169203 duration_in_ms=1.813
2018-10-25 02:33:05,169 [salt.state       :1770][INFO    ][3056] Running state [ctl] at time 02:33:05.169565
2018-10-25 02:33:05,169 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl]
2018-10-25 02:33:05,171 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl'}
2018-10-25 02:33:05,171 [salt.state       :1941][INFO    ][3056] Completed state [ctl] at time 02:33:05.171267 duration_in_ms=1.702
2018-10-25 02:33:05,171 [salt.state       :1770][INFO    ][3056] Running state [ctl.mcp-ovs-ha.local] at time 02:33:05.171947
2018-10-25 02:33:05,172 [salt.state       :1803][INFO    ][3056] Executing state host.present for [ctl.mcp-ovs-ha.local]
2018-10-25 02:33:05,174 [salt.state       :290 ][INFO    ][3056] {'host': 'ctl.mcp-ovs-ha.local'}
2018-10-25 02:33:05,174 [salt.state       :1941][INFO    ][3056] Completed state [ctl.mcp-ovs-ha.local] at time 02:33:05.174266 duration_in_ms=2.319
2018-10-25 02:33:05,174 [salt.state       :1770][INFO    ][3056] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 02:33:05.174523
2018-10-25 02:33:05,174 [salt.state       :1803][INFO    ][3056] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-25 02:33:05,175 [salt.state       :290 ][INFO    ][3056] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-25 02:33:05,175 [salt.state       :1941][INFO    ][3056] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 02:33:05.175377 duration_in_ms=0.854
2018-10-25 02:33:05,177 [salt.state       :1770][INFO    ][3056] Running state [ens3] at time 02:33:05.177875
2018-10-25 02:33:05,178 [salt.state       :1803][INFO    ][3056] Executing state network.managed for [ens3]
2018-10-25 02:33:05,390 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-25 02:33:05,760 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023305752968
2018-10-25 02:33:05,801 [salt.minion      :1431][INFO    ][5423] Starting a new job with PID 5423
2018-10-25 02:33:05,838 [salt.minion      :1708][INFO    ][5423] Returning information for job: 20181025023305752968
2018-10-25 02:33:06,501 [salt.state       :290 ][INFO    ][3056] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-25 02:33:06,502 [salt.state       :1941][INFO    ][3056] Completed state [ens3] at time 02:33:06.502222 duration_in_ms=1324.347
2018-10-25 02:33:06,510 [salt.state       :1770][INFO    ][3056] Running state [ens2] at time 02:33:06.510415
2018-10-25 02:33:06,510 [salt.state       :1803][INFO    ][3056] Executing state network.managed for [ens2]
2018-10-25 02:33:06,551 [salt.state       :290 ][INFO    ][3056] {'interface': 'Added network interface.'}
2018-10-25 02:33:06,552 [salt.state       :1941][INFO    ][3056] Completed state [ens2] at time 02:33:06.552450 duration_in_ms=42.035
2018-10-25 02:33:06,554 [salt.state       :1770][INFO    ][3056] Running state [linux_system_network] at time 02:33:06.554081
2018-10-25 02:33:06,554 [salt.state       :1803][INFO    ][3056] Executing state network.system for [linux_system_network]
2018-10-25 02:33:06,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-25 02:33:06,575 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-25 02:33:06,607 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-25 02:33:06,636 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-25 02:33:07,314 [salt.loaded.int.module.debian_ip:1970][WARNING ][3056] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-25 02:33:07,316 [salt.state       :290 ][INFO    ][3056] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-ha.local\n\n+SEARCH=maas\n'}
2018-10-25 02:33:07,316 [salt.state       :1941][INFO    ][3056] Completed state [linux_system_network] at time 02:33:07.316865 duration_in_ms=762.782
2018-10-25 02:33:07,323 [salt.state       :1770][INFO    ][3056] Running state [/etc/profile.d/proxy.sh] at time 02:33:07.323452
2018-10-25 02:33:07,323 [salt.state       :1803][INFO    ][3056] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-25 02:33:07,325 [salt.state       :290 ][INFO    ][3056] File /etc/profile.d/proxy.sh is not present
2018-10-25 02:33:07,325 [salt.state       :1941][INFO    ][3056] Completed state [/etc/profile.d/proxy.sh] at time 02:33:07.325411 duration_in_ms=1.959
2018-10-25 02:33:07,325 [salt.state       :1770][INFO    ][3056] Running state [/etc/apt/apt.conf.d/95proxies] at time 02:33:07.325676
2018-10-25 02:33:07,325 [salt.state       :1803][INFO    ][3056] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-25 02:33:07,326 [salt.state       :290 ][INFO    ][3056] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-25 02:33:07,326 [salt.state       :1941][INFO    ][3056] Completed state [/etc/apt/apt.conf.d/95proxies] at time 02:33:07.326587 duration_in_ms=0.91
2018-10-25 02:33:07,330 [salt.state       :1770][INFO    ][3056] Running state [ntp] at time 02:33:07.330690
2018-10-25 02:33:07,330 [salt.state       :1803][INFO    ][3056] Executing state pkg.installed for [ntp]
2018-10-25 02:33:07,662 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:33:07,707 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-25 02:33:12,997 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:33:13,053 [salt.state       :290 ][INFO    ][3056] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-25 02:33:13,080 [salt.state       :905 ][INFO    ][3056] Loading fresh modules for state activity
2018-10-25 02:33:13,134 [salt.state       :1941][INFO    ][3056] Completed state [ntp] at time 02:33:13.134464 duration_in_ms=5803.774
2018-10-25 02:33:13,143 [salt.state       :1770][INFO    ][3056] Running state [/etc/ntp.conf] at time 02:33:13.143073
2018-10-25 02:33:13,143 [salt.state       :1803][INFO    ][3056] Executing state file.managed for [/etc/ntp.conf]
2018-10-25 02:33:14,047 [salt.fileclient  :1215][INFO    ][3056] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-25 02:33:14,140 [salt.state       :290 ][INFO    ][3056] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-25 02:33:14,142 [salt.state       :1941][INFO    ][3056] Completed state [/etc/ntp.conf] at time 02:33:14.142217 duration_in_ms=999.144
2018-10-25 02:33:14,759 [salt.state       :1770][INFO    ][3056] Running state [ntp] at time 02:33:14.759179
2018-10-25 02:33:14,760 [salt.state       :1803][INFO    ][3056] Executing state service.running for [ntp]
2018-10-25 02:33:14,762 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-25 02:33:14,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-25 02:33:14,810 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-25 02:33:14,837 [salt.state       :290 ][INFO    ][3056] The service ntp is already running
2018-10-25 02:33:14,839 [salt.state       :1941][INFO    ][3056] Completed state [ntp] at time 02:33:14.839641 duration_in_ms=80.462
2018-10-25 02:33:14,840 [salt.state       :1770][INFO    ][3056] Running state [ntp] at time 02:33:14.840341
2018-10-25 02:33:14,842 [salt.state       :1803][INFO    ][3056] Executing state service.mod_watch for [ntp]
2018-10-25 02:33:14,844 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-25 02:33:14,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3056] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-25 02:33:14,982 [salt.state       :290 ][INFO    ][3056] {'ntp': True}
2018-10-25 02:33:14,983 [salt.state       :1941][INFO    ][3056] Completed state [ntp] at time 02:33:14.983100 duration_in_ms=142.758
2018-10-25 02:33:14,995 [salt.minion      :1708][INFO    ][3056] Returning information for job: 20181025023218888566
2018-10-25 02:33:19,870 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181025023319862393
2018-10-25 02:33:19,898 [salt.minion      :1431][INFO    ][6467] Starting a new job with PID 6467
2018-10-25 02:33:19,924 [salt.minion      :1708][INFO    ][6467] Returning information for job: 20181025023319862393
2018-10-25 02:33:37,674 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command pkg.upgrade with jid 20181025023337662424
2018-10-25 02:33:37,700 [salt.minion      :1431][INFO    ][6494] Starting a new job with PID 6494
2018-10-25 02:33:37,734 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6494] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:33:38,285 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6494] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-25 02:33:42,777 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023342766724
2018-10-25 02:33:42,811 [salt.minion      :1431][INFO    ][6524] Starting a new job with PID 6524
2018-10-25 02:33:42,845 [salt.minion      :1708][INFO    ][6524] Returning information for job: 20181025023342766724
2018-10-25 02:33:52,799 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023352790567
2018-10-25 02:33:52,835 [salt.minion      :1431][INFO    ][6559] Starting a new job with PID 6559
2018-10-25 02:33:52,887 [salt.minion      :1708][INFO    ][6559] Returning information for job: 20181025023352790567
2018-10-25 02:34:02,855 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023402837824
2018-10-25 02:34:02,880 [salt.minion      :1431][INFO    ][8171] Starting a new job with PID 8171
2018-10-25 02:34:02,910 [salt.minion      :1708][INFO    ][8171] Returning information for job: 20181025023402837824
2018-10-25 02:34:12,898 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023412885254
2018-10-25 02:34:12,927 [salt.minion      :1431][INFO    ][8633] Starting a new job with PID 8633
2018-10-25 02:34:12,972 [salt.minion      :1708][INFO    ][8633] Returning information for job: 20181025023412885254
2018-10-25 02:34:22,967 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023422960812
2018-10-25 02:34:23,008 [salt.minion      :1431][INFO    ][8694] Starting a new job with PID 8694
2018-10-25 02:34:23,058 [salt.minion      :1708][INFO    ][8694] Returning information for job: 20181025023422960812
2018-10-25 02:34:33,056 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023433046917
2018-10-25 02:34:33,081 [salt.minion      :1431][INFO    ][8726] Starting a new job with PID 8726
2018-10-25 02:34:33,127 [salt.minion      :1708][INFO    ][8726] Returning information for job: 20181025023433046917
2018-10-25 02:34:43,101 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023443088469
2018-10-25 02:34:43,132 [salt.minion      :1431][INFO    ][8731] Starting a new job with PID 8731
2018-10-25 02:34:43,163 [salt.minion      :1708][INFO    ][8731] Returning information for job: 20181025023443088469
2018-10-25 02:34:53,131 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023453119522
2018-10-25 02:34:53,159 [salt.minion      :1431][INFO    ][8760] Starting a new job with PID 8760
2018-10-25 02:34:53,188 [salt.minion      :1708][INFO    ][8760] Returning information for job: 20181025023453119522
2018-10-25 02:35:03,150 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023503141037
2018-10-25 02:35:03,180 [salt.minion      :1431][INFO    ][8768] Starting a new job with PID 8768
2018-10-25 02:35:03,204 [salt.minion      :1708][INFO    ][8768] Returning information for job: 20181025023503141037
2018-10-25 02:35:13,185 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023513177650
2018-10-25 02:35:13,214 [salt.minion      :1431][INFO    ][8818] Starting a new job with PID 8818
2018-10-25 02:35:13,244 [salt.minion      :1708][INFO    ][8818] Returning information for job: 20181025023513177650
2018-10-25 02:35:23,282 [salt.minion      :1307][INFO    ][2967] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023523271364
2018-10-25 02:35:23,317 [salt.minion      :1431][INFO    ][8988] Starting a new job with PID 8988
2018-10-25 02:35:23,353 [salt.minion      :1708][INFO    ][8988] Returning information for job: 20181025023523271364
2018-10-25 02:35:32,874 [salt.utils.parsers:1051][WARNING ][2967] Minion received a SIGTERM. Exiting.
2018-10-25 02:35:32,874 [salt.cli.daemons :82  ][INFO    ][2967] Shutting down the Salt Minion
2018-10-25 02:36:09,136 [salt.cli.daemons :293 ][INFO    ][16224] Setting up the Salt Minion "mdb01.mcp-ovs-ha.local"
2018-10-25 02:36:09,434 [salt.cli.daemons :82  ][INFO    ][16224] Starting up the Salt Minion
2018-10-25 02:36:09,435 [salt.utils.event :1017][INFO    ][16224] Starting pull socket on /var/run/salt/minion/minion_event_b0741cc873_pull.ipc
2018-10-25 02:36:10,453 [salt.minion      :976 ][INFO    ][16224] Creating minion process manager
2018-10-25 02:36:12,262 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][16224] Executing command ['date', '+%z'] in directory '/root'
2018-10-25 02:36:12,295 [salt.utils.schedule:568 ][INFO    ][16224] Updating job settings for scheduled job: __mine_interval
2018-10-25 02:36:12,322 [salt.minion      :1108][INFO    ][16224] Added mine.update to scheduler
2018-10-25 02:36:12,333 [salt.minion      :1975][INFO    ][16224] Minion is starting as user 'root'
2018-10-25 02:36:12,354 [salt.minion      :2336][INFO    ][16224] Minion is ready to receive requests!
2018-10-25 02:36:13,885 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023613873107
2018-10-25 02:36:13,904 [salt.minion      :1432][INFO    ][17356] Starting a new job with PID 17356
2018-10-25 02:36:13,928 [salt.minion      :1711][INFO    ][17356] Returning information for job: 20181025023613873107
2018-10-25 02:36:24,095 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023624085765
2018-10-25 02:36:24,116 [salt.minion      :1432][INFO    ][19267] Starting a new job with PID 19267
2018-10-25 02:36:24,143 [salt.minion      :1711][INFO    ][19267] Returning information for job: 20181025023624085765
2018-10-25 02:36:34,171 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023634164984
2018-10-25 02:36:34,199 [salt.minion      :1432][INFO    ][23366] Starting a new job with PID 23366
2018-10-25 02:36:34,289 [salt.minion      :1711][INFO    ][23366] Returning information for job: 20181025023634164984
2018-10-25 02:36:44,198 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023644184278
2018-10-25 02:36:44,233 [salt.minion      :1432][INFO    ][23732] Starting a new job with PID 23732
2018-10-25 02:36:44,267 [salt.minion      :1711][INFO    ][23732] Returning information for job: 20181025023644184278
2018-10-25 02:36:54,355 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023654342731
2018-10-25 02:36:54,383 [salt.minion      :1432][INFO    ][25281] Starting a new job with PID 25281
2018-10-25 02:36:54,406 [salt.minion      :1711][INFO    ][25281] Returning information for job: 20181025023654342731
2018-10-25 02:37:04,375 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023704367497
2018-10-25 02:37:04,400 [salt.minion      :1432][INFO    ][31212] Starting a new job with PID 31212
2018-10-25 02:37:04,420 [salt.minion      :1711][INFO    ][31212] Returning information for job: 20181025023704367497
2018-10-25 02:37:14,423 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025023714411405
2018-10-25 02:37:14,464 [salt.minion      :1432][INFO    ][31230] Starting a new job with PID 31230
2018-10-25 02:37:14,493 [salt.minion      :1711][INFO    ][31230] Returning information for job: 20181025023714411405
2018-10-25 02:37:20,378 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6494] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:37:20,455 [salt.minion      :1708][INFO    ][6494] Returning information for job: 20181025023337662424
2018-10-25 02:37:45,450 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command test.ping with jid 20181025023745441537
2018-10-25 02:37:45,480 [salt.minion      :1432][INFO    ][897] Starting a new job with PID 897
2018-10-25 02:37:45,513 [salt.minion      :1711][INFO    ][897] Returning information for job: 20181025023745441537
2018-10-25 02:41:20,829 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025024120817893
2018-10-25 02:41:20,848 [salt.minion      :1432][INFO    ][902] Starting a new job with PID 902
2018-10-25 02:41:25,841 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025024125832084
2018-10-25 02:41:25,861 [salt.minion      :1432][INFO    ][917] Starting a new job with PID 917
2018-10-25 02:41:25,880 [salt.minion      :1711][INFO    ][917] Returning information for job: 20181025024125832084
2018-10-25 02:41:28,625 [salt.state       :915 ][INFO    ][902] Loading fresh modules for state activity
2018-10-25 02:41:28,688 [salt.fileclient  :1219][INFO    ][902] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-25 02:41:28,726 [salt.fileclient  :1219][INFO    ][902] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-25 02:41:29,582 [salt.state       :1780][INFO    ][902] Running state [keepalived] at time 02:41:29.582640
2018-10-25 02:41:29,583 [salt.state       :1813][INFO    ][902] Executing state pkg.installed for [keepalived]
2018-10-25 02:41:29,584 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:41:30,050 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-25 02:41:30,211 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 02:41:32,472 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:41:32,511 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-25 02:41:35,926 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025024135914593
2018-10-25 02:41:35,942 [salt.minion      :1432][INFO    ][2147] Starting a new job with PID 2147
2018-10-25 02:41:35,965 [salt.minion      :1711][INFO    ][2147] Returning information for job: 20181025024135914593
2018-10-25 02:41:37,555 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:41:37,611 [salt.state       :300 ][INFO    ][902] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-25 02:41:37,640 [salt.state       :915 ][INFO    ][902] Loading fresh modules for state activity
2018-10-25 02:41:37,686 [salt.state       :1951][INFO    ][902] Completed state [keepalived] at time 02:41:37.685974 duration_in_ms=8103.334
2018-10-25 02:41:37,692 [salt.state       :1780][INFO    ][902] Running state [lsof] at time 02:41:37.692600
2018-10-25 02:41:37,692 [salt.state       :1813][INFO    ][902] Executing state pkg.installed for [lsof]
2018-10-25 02:41:38,456 [salt.state       :300 ][INFO    ][902] All specified packages are already installed
2018-10-25 02:41:38,456 [salt.state       :1951][INFO    ][902] Completed state [lsof] at time 02:41:38.456555 duration_in_ms=763.956
2018-10-25 02:41:38,459 [salt.state       :1780][INFO    ][902] Running state [/etc/keepalived/keepalived.conf] at time 02:41:38.459879
2018-10-25 02:41:38,460 [salt.state       :1813][INFO    ][902] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-25 02:41:38,493 [salt.fileclient  :1219][INFO    ][902] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-25 02:41:38,553 [salt.state       :300 ][INFO    ][902] File changed:
New file
2018-10-25 02:41:38,553 [salt.state       :1951][INFO    ][902] Completed state [/etc/keepalived/keepalived.conf] at time 02:41:38.553406 duration_in_ms=93.526
2018-10-25 02:41:38,555 [salt.state       :1780][INFO    ][902] Running state [keepalived] at time 02:41:38.555014
2018-10-25 02:41:38,555 [salt.state       :1813][INFO    ][902] Executing state service.running for [keepalived]
2018-10-25 02:41:38,556 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-25 02:41:38,581 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-25 02:41:38,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-25 02:41:38,626 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-25 02:41:38,698 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-25 02:41:38,718 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-25 02:41:38,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][902] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-25 02:41:38,760 [salt.state       :300 ][INFO    ][902] {'keepalived': True}
2018-10-25 02:41:38,761 [salt.state       :1951][INFO    ][902] Completed state [keepalived] at time 02:41:38.761567 duration_in_ms=206.553
2018-10-25 02:41:38,763 [salt.minion      :1711][INFO    ][902] Returning information for job: 20181025024120817893
2018-10-25 02:42:23,601 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command pillar.get with jid 20181025024223592394
2018-10-25 02:42:23,633 [salt.minion      :1432][INFO    ][2314] Starting a new job with PID 2314
2018-10-25 02:42:23,648 [salt.minion      :1711][INFO    ][2314] Returning information for job: 20181025024223592394
2018-10-25 02:56:38,689 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025025638677061
2018-10-25 02:56:38,711 [salt.minion      :1432][INFO    ][2367] Starting a new job with PID 2367
2018-10-25 02:56:44,169 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025025644155309
2018-10-25 02:56:44,195 [salt.minion      :1432][INFO    ][2372] Starting a new job with PID 2372
2018-10-25 02:56:44,213 [salt.minion      :1711][INFO    ][2372] Returning information for job: 20181025025644155309
2018-10-25 02:56:47,711 [salt.state       :915 ][INFO    ][2367] Loading fresh modules for state activity
2018-10-25 02:56:48,633 [salt.fileclient  :1219][INFO    ][2367] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-25 02:56:48,673 [salt.fileclient  :1219][INFO    ][2367] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-25 02:56:48,706 [salt.fileclient  :1219][INFO    ][2367] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-25 02:56:49,560 [salt.state       :1780][INFO    ][2367] Running state [memcached] at time 02:56:49.560009
2018-10-25 02:56:49,560 [salt.state       :1813][INFO    ][2367] Executing state pkg.installed for [memcached]
2018-10-25 02:56:49,561 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:56:50,063 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-25 02:56:50,233 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 02:56:54,220 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025025654204611
2018-10-25 02:56:54,243 [salt.minion      :1432][INFO    ][2733] Starting a new job with PID 2733
2018-10-25 02:56:54,260 [salt.minion      :1711][INFO    ][2733] Returning information for job: 20181025025654204611
2018-10-25 02:56:54,914 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:56:54,945 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-25 02:56:58,967 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:56:59,028 [salt.state       :300 ][INFO    ][2367] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-25 02:56:59,054 [salt.state       :915 ][INFO    ][2367] Loading fresh modules for state activity
2018-10-25 02:56:59,103 [salt.state       :1951][INFO    ][2367] Completed state [memcached] at time 02:56:59.103895 duration_in_ms=9543.886
2018-10-25 02:56:59,114 [salt.state       :1780][INFO    ][2367] Running state [python-memcache] at time 02:56:59.114062
2018-10-25 02:56:59,114 [salt.state       :1813][INFO    ][2367] Executing state pkg.installed for [python-memcache]
2018-10-25 02:56:59,942 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:56:59,977 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-25 02:57:02,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:57:02,243 [salt.state       :300 ][INFO    ][2367] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-25 02:57:02,267 [salt.state       :915 ][INFO    ][2367] Loading fresh modules for state activity
2018-10-25 02:57:02,313 [salt.state       :1951][INFO    ][2367] Completed state [python-memcache] at time 02:57:02.313318 duration_in_ms=3199.255
2018-10-25 02:57:02,319 [salt.state       :1780][INFO    ][2367] Running state [/etc/memcached.conf] at time 02:57:02.319284
2018-10-25 02:57:02,319 [salt.state       :1813][INFO    ][2367] Executing state file.managed for [/etc/memcached.conf]
2018-10-25 02:57:02,364 [salt.fileclient  :1219][INFO    ][2367] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-25 02:57:02,406 [salt.state       :300 ][INFO    ][2367] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-25 02:57:02,414 [salt.state       :1951][INFO    ][2367] Completed state [/etc/memcached.conf] at time 02:57:02.414776 duration_in_ms=95.491
2018-10-25 02:57:02,993 [salt.state       :1780][INFO    ][2367] Running state [memcached] at time 02:57:02.993050
2018-10-25 02:57:02,994 [salt.state       :1813][INFO    ][2367] Executing state service.running for [memcached]
2018-10-25 02:57:02,995 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-25 02:57:03,014 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-25 02:57:03,031 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-25 02:57:03,046 [salt.state       :300 ][INFO    ][2367] The service memcached is already running
2018-10-25 02:57:03,047 [salt.state       :1951][INFO    ][2367] Completed state [memcached] at time 02:57:03.046936 duration_in_ms=53.887
2018-10-25 02:57:03,047 [salt.state       :1780][INFO    ][2367] Running state [memcached] at time 02:57:03.047253
2018-10-25 02:57:03,047 [salt.state       :1813][INFO    ][2367] Executing state service.mod_watch for [memcached]
2018-10-25 02:57:03,049 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-25 02:57:03,065 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2367] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-25 02:57:03,093 [salt.state       :300 ][INFO    ][2367] {'memcached': True}
2018-10-25 02:57:03,093 [salt.state       :1951][INFO    ][2367] Completed state [memcached] at time 02:57:03.093466 duration_in_ms=46.213
2018-10-25 02:57:03,095 [salt.minion      :1711][INFO    ][2367] Returning information for job: 20181025025638677061
2018-10-25 02:57:04,007 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025025703995100
2018-10-25 02:57:04,031 [salt.minion      :1432][INFO    ][3381] Starting a new job with PID 3381
2018-10-25 02:57:09,195 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025025709183153
2018-10-25 02:57:09,223 [salt.minion      :1432][INFO    ][3386] Starting a new job with PID 3386
2018-10-25 02:57:09,249 [salt.minion      :1711][INFO    ][3386] Returning information for job: 20181025025709183153
2018-10-25 02:57:12,285 [salt.state       :915 ][INFO    ][3381] Loading fresh modules for state activity
2018-10-25 02:57:14,301 [salt.fileclient  :1219][INFO    ][3381] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-25 02:57:14,337 [salt.fileclient  :1219][INFO    ][3381] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-25 02:57:15,254 [salt.state       :1780][INFO    ][3381] Running state [haproxy] at time 02:57:15.254055
2018-10-25 02:57:15,254 [salt.state       :1813][INFO    ][3381] Executing state pkg.installed for [haproxy]
2018-10-25 02:57:15,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:57:15,744 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-25 02:57:15,932 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 02:57:18,453 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:57:18,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-25 02:57:19,369 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025025719351963
2018-10-25 02:57:19,389 [salt.minion      :1432][INFO    ][3774] Starting a new job with PID 3774
2018-10-25 02:57:19,409 [salt.minion      :1711][INFO    ][3774] Returning information for job: 20181025025719351963
2018-10-25 02:57:22,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:57:22,962 [salt.state       :300 ][INFO    ][3381] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-25 02:57:22,997 [salt.state       :915 ][INFO    ][3381] Loading fresh modules for state activity
2018-10-25 02:57:23,050 [salt.state       :1951][INFO    ][3381] Completed state [haproxy] at time 02:57:23.050609 duration_in_ms=7796.554
2018-10-25 02:57:23,057 [salt.state       :1780][INFO    ][3381] Running state [/etc/default/haproxy] at time 02:57:23.057592
2018-10-25 02:57:23,058 [salt.state       :1813][INFO    ][3381] Executing state file.managed for [/etc/default/haproxy]
2018-10-25 02:57:23,097 [salt.fileclient  :1219][INFO    ][3381] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-25 02:57:23,101 [salt.state       :300 ][INFO    ][3381] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-25 02:57:23,105 [salt.state       :1951][INFO    ][3381] Completed state [/etc/default/haproxy] at time 02:57:23.105006 duration_in_ms=47.413
2018-10-25 02:57:23,105 [salt.state       :1780][INFO    ][3381] Running state [/etc/haproxy/haproxy.cfg] at time 02:57:23.105638
2018-10-25 02:57:23,106 [salt.state       :1813][INFO    ][3381] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-25 02:57:23,126 [salt.fileclient  :1219][INFO    ][3381] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-25 02:57:23,357 [salt.state       :300 ][INFO    ][3381] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-25 02:57:23,366 [salt.state       :1951][INFO    ][3381] Completed state [/etc/haproxy/haproxy.cfg] at time 02:57:23.366783 duration_in_ms=261.145
2018-10-25 02:57:23,367 [salt.state       :1780][INFO    ][3381] Running state [/etc/haproxy/ssl] at time 02:57:23.367177
2018-10-25 02:57:23,367 [salt.state       :1813][INFO    ][3381] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-25 02:57:23,376 [salt.state       :300 ][INFO    ][3381] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-25 02:57:23,376 [salt.state       :1951][INFO    ][3381] Completed state [/etc/haproxy/ssl] at time 02:57:23.376660 duration_in_ms=9.483
2018-10-25 02:57:23,377 [salt.state       :1780][INFO    ][3381] Running state [/etc/haproxy/errors/429.http11] at time 02:57:23.377307
2018-10-25 02:57:23,377 [salt.state       :1813][INFO    ][3381] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-25 02:57:23,409 [salt.fileclient  :1219][INFO    ][3381] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-25 02:57:23,420 [salt.state       :300 ][INFO    ][3381] File changed:
New file
2018-10-25 02:57:23,421 [salt.state       :1951][INFO    ][3381] Completed state [/etc/haproxy/errors/429.http11] at time 02:57:23.421881 duration_in_ms=44.574
2018-10-25 02:57:23,423 [salt.state       :1780][INFO    ][3381] Running state [haproxy_status_packages] at time 02:57:23.423263
2018-10-25 02:57:23,424 [salt.state       :1813][INFO    ][3381] Executing state pkg.installed for [haproxy_status_packages]
2018-10-25 02:57:24,414 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 02:57:24,452 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-25 02:57:27,094 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 02:57:27,148 [salt.state       :300 ][INFO    ][3381] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-25 02:57:27,172 [salt.state       :915 ][INFO    ][3381] Loading fresh modules for state activity
2018-10-25 02:57:27,221 [salt.state       :1951][INFO    ][3381] Completed state [haproxy_status_packages] at time 02:57:27.221606 duration_in_ms=3798.34
2018-10-25 02:57:27,229 [salt.state       :1780][INFO    ][3381] Running state [/usr/bin/haproxy-status.sh] at time 02:57:27.229679
2018-10-25 02:57:27,230 [salt.state       :1813][INFO    ][3381] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-25 02:57:27,256 [salt.fileclient  :1219][INFO    ][3381] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-25 02:57:27,292 [salt.state       :300 ][INFO    ][3381] File changed:
New file
2018-10-25 02:57:27,292 [salt.state       :1951][INFO    ][3381] Completed state [/usr/bin/haproxy-status.sh] at time 02:57:27.292754 duration_in_ms=63.074
2018-10-25 02:57:27,296 [salt.state       :1780][INFO    ][3381] Running state [net.ipv4.ip_nonlocal_bind] at time 02:57:27.296340
2018-10-25 02:57:27,296 [salt.state       :1813][INFO    ][3381] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-25 02:57:27,301 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-25 02:57:27,317 [salt.state       :300 ][INFO    ][3381] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-25 02:57:27,317 [salt.state       :1951][INFO    ][3381] Completed state [net.ipv4.ip_nonlocal_bind] at time 02:57:27.317896 duration_in_ms=21.556
2018-10-25 02:57:27,913 [salt.state       :1780][INFO    ][3381] Running state [haproxy] at time 02:57:27.913903
2018-10-25 02:57:27,914 [salt.state       :1813][INFO    ][3381] Executing state service.running for [haproxy]
2018-10-25 02:57:27,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-25 02:57:27,943 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-25 02:57:27,963 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-25 02:57:27,983 [salt.state       :300 ][INFO    ][3381] The service haproxy is already running
2018-10-25 02:57:27,985 [salt.state       :1951][INFO    ][3381] Completed state [haproxy] at time 02:57:27.985762 duration_in_ms=71.86
2018-10-25 02:57:27,986 [salt.state       :1780][INFO    ][3381] Running state [haproxy] at time 02:57:27.986155
2018-10-25 02:57:27,986 [salt.state       :1813][INFO    ][3381] Executing state service.mod_watch for [haproxy]
2018-10-25 02:57:27,987 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-25 02:57:28,018 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3381] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-25 02:57:28,063 [salt.state       :300 ][INFO    ][3381] {'haproxy': True}
2018-10-25 02:57:28,064 [salt.state       :1951][INFO    ][3381] Completed state [haproxy] at time 02:57:28.064529 duration_in_ms=78.374
2018-10-25 02:57:28,070 [salt.minion      :1711][INFO    ][3381] Returning information for job: 20181025025703995100
2018-10-25 02:57:29,457 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command service.status with jid 20181025025729444759
2018-10-25 02:57:29,481 [salt.minion      :1432][INFO    ][4565] Starting a new job with PID 4565
2018-10-25 02:57:30,030 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4565] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-25 02:57:30,054 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4565] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-25 02:57:30,079 [salt.minion      :1711][INFO    ][4565] Returning information for job: 20181025025729444759
2018-10-25 02:57:31,030 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command service.restart with jid 20181025025731017515
2018-10-25 02:57:31,058 [salt.minion      :1432][INFO    ][4575] Starting a new job with PID 4575
2018-10-25 02:57:31,615 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4575] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-25 02:57:31,654 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4575] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-25 02:57:31,696 [salt.minion      :1711][INFO    ][4575] Returning information for job: 20181025025731017515
2018-10-25 03:17:19,886 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command test.ping with jid 20181025031719874562
2018-10-25 03:17:19,914 [salt.minion      :1432][INFO    ][4677] Starting a new job with PID 4677
2018-10-25 03:17:19,955 [salt.minion      :1711][INFO    ][4677] Returning information for job: 20181025031719874562
2018-10-25 03:17:42,012 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025031741999546
2018-10-25 03:17:42,037 [salt.minion      :1432][INFO    ][4682] Starting a new job with PID 4682
2018-10-25 03:17:43,142 [salt.state       :915 ][INFO    ][4682] Loading fresh modules for state activity
2018-10-25 03:17:44,138 [salt.state       :1780][INFO    ][4682] Running state [keepalived] at time 03:17:44.138045
2018-10-25 03:17:44,138 [salt.state       :1813][INFO    ][4682] Executing state pkg.installed for [keepalived]
2018-10-25 03:17:44,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4682] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:17:44,681 [salt.state       :300 ][INFO    ][4682] All specified packages are already installed
2018-10-25 03:17:44,681 [salt.state       :1951][INFO    ][4682] Completed state [keepalived] at time 03:17:44.681528 duration_in_ms=543.482
2018-10-25 03:17:44,681 [salt.state       :1780][INFO    ][4682] Running state [lsof] at time 03:17:44.681862
2018-10-25 03:17:44,682 [salt.state       :1813][INFO    ][4682] Executing state pkg.installed for [lsof]
2018-10-25 03:17:44,692 [salt.state       :300 ][INFO    ][4682] All specified packages are already installed
2018-10-25 03:17:44,693 [salt.state       :1951][INFO    ][4682] Completed state [lsof] at time 03:17:44.693085 duration_in_ms=11.223
2018-10-25 03:17:44,697 [salt.state       :1780][INFO    ][4682] Running state [/etc/keepalived/keepalived.conf] at time 03:17:44.697368
2018-10-25 03:17:44,697 [salt.state       :1813][INFO    ][4682] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-25 03:17:44,786 [salt.state       :300 ][INFO    ][4682] File /etc/keepalived/keepalived.conf is in the correct state
2018-10-25 03:17:44,787 [salt.state       :1951][INFO    ][4682] Completed state [/etc/keepalived/keepalived.conf] at time 03:17:44.787377 duration_in_ms=90.009
2018-10-25 03:17:44,788 [salt.state       :1780][INFO    ][4682] Running state [keepalived] at time 03:17:44.788318
2018-10-25 03:17:44,788 [salt.state       :1813][INFO    ][4682] Executing state service.running for [keepalived]
2018-10-25 03:17:44,789 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4682] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-25 03:17:44,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4682] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-25 03:17:44,858 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4682] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-25 03:17:44,879 [salt.state       :300 ][INFO    ][4682] The service keepalived is already running
2018-10-25 03:17:44,881 [salt.state       :1951][INFO    ][4682] Completed state [keepalived] at time 03:17:44.880936 duration_in_ms=92.617
2018-10-25 03:17:44,884 [salt.minion      :1711][INFO    ][4682] Returning information for job: 20181025031741999546
2018-10-25 03:18:33,036 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command pillar.get with jid 20181025031833026301
2018-10-25 03:18:33,070 [salt.minion      :1432][INFO    ][4710] Starting a new job with PID 4710
2018-10-25 03:18:33,081 [salt.minion      :1711][INFO    ][4710] Returning information for job: 20181025031833026301
2018-10-25 03:21:22,009 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025032121998755
2018-10-25 03:21:22,032 [salt.minion      :1432][INFO    ][4715] Starting a new job with PID 4715
2018-10-25 03:21:24,067 [salt.state       :915 ][INFO    ][4715] Loading fresh modules for state activity
2018-10-25 03:21:26,018 [salt.state       :1780][INFO    ][4715] Running state [memcached] at time 03:21:26.018025
2018-10-25 03:21:26,019 [salt.state       :1813][INFO    ][4715] Executing state pkg.installed for [memcached]
2018-10-25 03:21:26,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4715] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:21:26,574 [salt.state       :300 ][INFO    ][4715] All specified packages are already installed
2018-10-25 03:21:26,575 [salt.state       :1951][INFO    ][4715] Completed state [memcached] at time 03:21:26.575333 duration_in_ms=557.308
2018-10-25 03:21:26,575 [salt.state       :1780][INFO    ][4715] Running state [python-memcache] at time 03:21:26.575938
2018-10-25 03:21:26,576 [salt.state       :1813][INFO    ][4715] Executing state pkg.installed for [python-memcache]
2018-10-25 03:21:26,586 [salt.state       :300 ][INFO    ][4715] All specified packages are already installed
2018-10-25 03:21:26,587 [salt.state       :1951][INFO    ][4715] Completed state [python-memcache] at time 03:21:26.587192 duration_in_ms=11.254
2018-10-25 03:21:26,591 [salt.state       :1780][INFO    ][4715] Running state [/etc/memcached.conf] at time 03:21:26.591051
2018-10-25 03:21:26,591 [salt.state       :1813][INFO    ][4715] Executing state file.managed for [/etc/memcached.conf]
2018-10-25 03:21:26,645 [salt.state       :300 ][INFO    ][4715] File /etc/memcached.conf is in the correct state
2018-10-25 03:21:26,645 [salt.state       :1951][INFO    ][4715] Completed state [/etc/memcached.conf] at time 03:21:26.645507 duration_in_ms=54.456
2018-10-25 03:21:26,646 [salt.state       :1780][INFO    ][4715] Running state [memcached] at time 03:21:26.646760
2018-10-25 03:21:26,647 [salt.state       :1813][INFO    ][4715] Executing state service.running for [memcached]
2018-10-25 03:21:26,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4715] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-25 03:21:26,685 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4715] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-25 03:21:26,704 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4715] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-25 03:21:26,724 [salt.state       :300 ][INFO    ][4715] The service memcached is already running
2018-10-25 03:21:26,725 [salt.state       :1951][INFO    ][4715] Completed state [memcached] at time 03:21:26.724942 duration_in_ms=78.182
2018-10-25 03:21:26,726 [salt.minion      :1711][INFO    ][4715] Returning information for job: 20181025032121998755
2018-10-25 03:21:28,273 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025032128262456
2018-10-25 03:21:28,296 [salt.minion      :1432][INFO    ][4743] Starting a new job with PID 4743
2018-10-25 03:21:33,813 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025032133800546
2018-10-25 03:21:33,836 [salt.minion      :1432][INFO    ][4748] Starting a new job with PID 4748
2018-10-25 03:21:33,859 [salt.minion      :1711][INFO    ][4748] Returning information for job: 20181025032133800546
2018-10-25 03:21:36,767 [salt.state       :915 ][INFO    ][4743] Loading fresh modules for state activity
2018-10-25 03:21:39,424 [salt.state       :1780][INFO    ][4743] Running state [haproxy] at time 03:21:39.423971
2018-10-25 03:21:39,425 [salt.state       :1813][INFO    ][4743] Executing state pkg.installed for [haproxy]
2018-10-25 03:21:39,426 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4743] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:21:40,016 [salt.state       :300 ][INFO    ][4743] All specified packages are already installed
2018-10-25 03:21:40,017 [salt.state       :1951][INFO    ][4743] Completed state [haproxy] at time 03:21:40.017309 duration_in_ms=593.339
2018-10-25 03:21:40,023 [salt.state       :1780][INFO    ][4743] Running state [/etc/default/haproxy] at time 03:21:40.023427
2018-10-25 03:21:40,024 [salt.state       :1813][INFO    ][4743] Executing state file.managed for [/etc/default/haproxy]
2018-10-25 03:21:40,050 [salt.state       :300 ][INFO    ][4743] File /etc/default/haproxy is in the correct state
2018-10-25 03:21:40,051 [salt.state       :1951][INFO    ][4743] Completed state [/etc/default/haproxy] at time 03:21:40.051152 duration_in_ms=27.725
2018-10-25 03:21:40,051 [salt.state       :1780][INFO    ][4743] Running state [/etc/haproxy/haproxy.cfg] at time 03:21:40.051769
2018-10-25 03:21:40,052 [salt.state       :1813][INFO    ][4743] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-25 03:21:40,268 [salt.state       :300 ][INFO    ][4743] File /etc/haproxy/haproxy.cfg is in the correct state
2018-10-25 03:21:40,269 [salt.state       :1951][INFO    ][4743] Completed state [/etc/haproxy/haproxy.cfg] at time 03:21:40.268950 duration_in_ms=217.18
2018-10-25 03:21:40,269 [salt.state       :1780][INFO    ][4743] Running state [/etc/haproxy/ssl] at time 03:21:40.269937
2018-10-25 03:21:40,271 [salt.state       :1813][INFO    ][4743] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-25 03:21:40,273 [salt.state       :300 ][INFO    ][4743] Directory /etc/haproxy/ssl is in the correct state
Directory /etc/haproxy/ssl updated
2018-10-25 03:21:40,273 [salt.state       :1951][INFO    ][4743] Completed state [/etc/haproxy/ssl] at time 03:21:40.273880 duration_in_ms=3.943
2018-10-25 03:21:40,274 [salt.state       :1780][INFO    ][4743] Running state [/etc/haproxy/errors/429.http11] at time 03:21:40.274313
2018-10-25 03:21:40,274 [salt.state       :1813][INFO    ][4743] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-25 03:21:40,300 [salt.state       :300 ][INFO    ][4743] File /etc/haproxy/errors/429.http11 is in the correct state
2018-10-25 03:21:40,300 [salt.state       :1951][INFO    ][4743] Completed state [/etc/haproxy/errors/429.http11] at time 03:21:40.300684 duration_in_ms=26.37
2018-10-25 03:21:40,300 [salt.state       :1780][INFO    ][4743] Running state [haproxy_status_packages] at time 03:21:40.300946
2018-10-25 03:21:40,301 [salt.state       :1813][INFO    ][4743] Executing state pkg.installed for [haproxy_status_packages]
2018-10-25 03:21:40,317 [salt.state       :300 ][INFO    ][4743] All specified packages are already installed
2018-10-25 03:21:40,317 [salt.state       :1951][INFO    ][4743] Completed state [haproxy_status_packages] at time 03:21:40.317911 duration_in_ms=16.965
2018-10-25 03:21:40,318 [salt.state       :1780][INFO    ][4743] Running state [/usr/bin/haproxy-status.sh] at time 03:21:40.318797
2018-10-25 03:21:40,319 [salt.state       :1813][INFO    ][4743] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-25 03:21:40,362 [salt.state       :300 ][INFO    ][4743] File /usr/bin/haproxy-status.sh is in the correct state
2018-10-25 03:21:40,362 [salt.state       :1951][INFO    ][4743] Completed state [/usr/bin/haproxy-status.sh] at time 03:21:40.362610 duration_in_ms=43.812
2018-10-25 03:21:40,364 [salt.state       :1780][INFO    ][4743] Running state [net.ipv4.ip_nonlocal_bind] at time 03:21:40.364755
2018-10-25 03:21:40,365 [salt.state       :1813][INFO    ][4743] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-25 03:21:40,384 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4743] Executing command 'sysctl -n net.ipv4.ip_nonlocal_bind' in directory '/root'
2018-10-25 03:21:40,403 [salt.state       :300 ][INFO    ][4743] Sysctl value net.ipv4.ip_nonlocal_bind = 1 is already set
2018-10-25 03:21:40,404 [salt.state       :1951][INFO    ][4743] Completed state [net.ipv4.ip_nonlocal_bind] at time 03:21:40.404015 duration_in_ms=39.26
2018-10-25 03:21:40,407 [salt.state       :1780][INFO    ][4743] Running state [haproxy] at time 03:21:40.406872
2018-10-25 03:21:40,408 [salt.state       :1813][INFO    ][4743] Executing state service.running for [haproxy]
2018-10-25 03:21:40,409 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4743] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-25 03:21:40,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4743] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-25 03:21:40,458 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4743] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-25 03:21:40,479 [salt.state       :300 ][INFO    ][4743] The service haproxy is already running
2018-10-25 03:21:40,480 [salt.state       :1951][INFO    ][4743] Completed state [haproxy] at time 03:21:40.480466 duration_in_ms=73.594
2018-10-25 03:21:40,482 [salt.minion      :1711][INFO    ][4743] Returning information for job: 20181025032128262456
2018-10-25 03:21:41,951 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command service.status with jid 20181025032141938415
2018-10-25 03:21:41,976 [salt.minion      :1432][INFO    ][4791] Starting a new job with PID 4791
2018-10-25 03:21:42,542 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4791] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-25 03:21:42,562 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4791] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-25 03:21:42,579 [salt.minion      :1711][INFO    ][4791] Returning information for job: 20181025032141938415
2018-10-25 03:21:43,910 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command service.restart with jid 20181025032143898040
2018-10-25 03:21:43,939 [salt.minion      :1432][INFO    ][4801] Starting a new job with PID 4801
2018-10-25 03:21:44,584 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4801] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-25 03:21:44,638 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][4801] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-25 03:21:44,693 [salt.minion      :1711][INFO    ][4801] Returning information for job: 20181025032143898040
2018-10-25 03:36:13,358 [salt.utils.schedule:1377][INFO    ][16224] Running scheduled job: __mine_interval
2018-10-25 03:46:48,471 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025034648458201
2018-10-25 03:46:48,494 [salt.minion      :1432][INFO    ][4911] Starting a new job with PID 4911
2018-10-25 03:46:49,669 [salt.state       :915 ][INFO    ][4911] Loading fresh modules for state activity
2018-10-25 03:46:49,739 [salt.fileclient  :1219][INFO    ][4911] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-25 03:46:49,775 [salt.fileclient  :1219][INFO    ][4911] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-25 03:46:49,809 [salt.fileclient  :1219][INFO    ][4911] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-25 03:46:49,858 [salt.fileclient  :1219][INFO    ][4911] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-25 03:46:50,814 [salt.state       :1780][INFO    ][4911] Running state [redis-server] at time 03:46:50.814824
2018-10-25 03:46:50,815 [salt.state       :1813][INFO    ][4911] Executing state pkg.installed for [redis-server]
2018-10-25 03:46:50,817 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:46:51,479 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-25 03:46:51,661 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 03:46:53,523 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034653512312
2018-10-25 03:46:53,547 [salt.minion      :1432][INFO    ][5265] Starting a new job with PID 5265
2018-10-25 03:46:53,565 [salt.minion      :1711][INFO    ][5265] Returning information for job: 20181025034653512312
2018-10-25 03:46:54,191 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:46:54,232 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-25 03:46:59,422 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:46:59,484 [salt.state       :300 ][INFO    ][4911] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-25 03:46:59,519 [salt.state       :915 ][INFO    ][4911] Loading fresh modules for state activity
2018-10-25 03:46:59,575 [salt.state       :1951][INFO    ][4911] Completed state [redis-server] at time 03:46:59.575491 duration_in_ms=8760.667
2018-10-25 03:46:59,581 [salt.state       :1780][INFO    ][4911] Running state [vm.overcommit_memory] at time 03:46:59.581946
2018-10-25 03:46:59,582 [salt.state       :1813][INFO    ][4911] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-25 03:46:59,587 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-25 03:46:59,604 [salt.state       :300 ][INFO    ][4911] {'vm.overcommit_memory': 1}
2018-10-25 03:46:59,605 [salt.state       :1951][INFO    ][4911] Completed state [vm.overcommit_memory] at time 03:46:59.605040 duration_in_ms=23.094
2018-10-25 03:46:59,609 [salt.state       :1780][INFO    ][4911] Running state [/etc/redis/redis.conf] at time 03:46:59.609896
2018-10-25 03:46:59,610 [salt.state       :1813][INFO    ][4911] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-25 03:46:59,662 [salt.fileclient  :1219][INFO    ][4911] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-25 03:46:59,747 [salt.state       :300 ][INFO    ][4911] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-25 03:46:59,757 [salt.state       :1951][INFO    ][4911] Completed state [/etc/redis/redis.conf] at time 03:46:59.756127 duration_in_ms=146.23
2018-10-25 03:47:00,405 [salt.state       :1780][INFO    ][4911] Running state [redis-server] at time 03:47:00.405543
2018-10-25 03:47:00,406 [salt.state       :1813][INFO    ][4911] Executing state service.running for [redis-server]
2018-10-25 03:47:00,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-25 03:47:00,438 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-25 03:47:00,463 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-25 03:47:00,489 [salt.state       :300 ][INFO    ][4911] The service redis-server is already running
2018-10-25 03:47:00,490 [salt.state       :1951][INFO    ][4911] Completed state [redis-server] at time 03:47:00.490362 duration_in_ms=84.83
2018-10-25 03:47:00,491 [salt.state       :1780][INFO    ][4911] Running state [redis-server] at time 03:47:00.491313
2018-10-25 03:47:00,492 [salt.state       :1813][INFO    ][4911] Executing state service.mod_watch for [redis-server]
2018-10-25 03:47:00,494 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-25 03:47:00,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-25 03:47:00,815 [salt.state       :300 ][INFO    ][4911] {'redis-server': True}
2018-10-25 03:47:00,817 [salt.state       :1951][INFO    ][4911] Completed state [redis-server] at time 03:47:00.817091 duration_in_ms=325.777
2018-10-25 03:47:00,823 [salt.state       :1780][INFO    ][4911] Running state [redis-sentinel] at time 03:47:00.823290
2018-10-25 03:47:00,824 [salt.state       :1813][INFO    ][4911] Executing state pkg.installed for [redis-sentinel]
2018-10-25 03:47:01,147 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:47:01,189 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-25 03:47:03,731 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034703712198
2018-10-25 03:47:03,755 [salt.minion      :1432][INFO    ][6057] Starting a new job with PID 6057
2018-10-25 03:47:03,775 [salt.minion      :1711][INFO    ][6057] Returning information for job: 20181025034703712198
2018-10-25 03:47:05,482 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:47:05,541 [salt.state       :300 ][INFO    ][4911] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-25 03:47:05,570 [salt.state       :915 ][INFO    ][4911] Loading fresh modules for state activity
2018-10-25 03:47:05,627 [salt.state       :1951][INFO    ][4911] Completed state [redis-sentinel] at time 03:47:05.627342 duration_in_ms=4804.049
2018-10-25 03:47:06,304 [salt.state       :1780][INFO    ][4911] Running state [/etc/redis/sentinel.conf] at time 03:47:06.304727
2018-10-25 03:47:06,305 [salt.state       :1813][INFO    ][4911] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-25 03:47:06,333 [salt.fileclient  :1219][INFO    ][4911] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-25 03:47:06,385 [salt.state       :300 ][INFO    ][4911] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-25 03:47:06,385 [salt.state       :1951][INFO    ][4911] Completed state [/etc/redis/sentinel.conf] at time 03:47:06.385347 duration_in_ms=80.621
2018-10-25 03:47:06,386 [salt.state       :1780][INFO    ][4911] Running state [redis-sentinel] at time 03:47:06.386419
2018-10-25 03:47:06,387 [salt.state       :1813][INFO    ][4911] Executing state service.running for [redis-sentinel]
2018-10-25 03:47:06,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-25 03:47:06,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-25 03:47:06,436 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-25 03:47:06,458 [salt.state       :300 ][INFO    ][4911] The service redis-sentinel is already running
2018-10-25 03:47:06,460 [salt.state       :1951][INFO    ][4911] Completed state [redis-sentinel] at time 03:47:06.460319 duration_in_ms=73.9
2018-10-25 03:47:06,462 [salt.state       :1780][INFO    ][4911] Running state [redis-sentinel] at time 03:47:06.462038
2018-10-25 03:47:06,463 [salt.state       :1813][INFO    ][4911] Executing state service.mod_watch for [redis-sentinel]
2018-10-25 03:47:06,465 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-25 03:47:06,491 [salt.loaded.int.module.cmdmod:395 ][INFO    ][4911] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-25 03:47:06,789 [salt.state       :300 ][INFO    ][4911] {'redis-sentinel': True}
2018-10-25 03:47:06,790 [salt.state       :1951][INFO    ][4911] Completed state [redis-sentinel] at time 03:47:06.789638 duration_in_ms=327.601
2018-10-25 03:47:06,794 [salt.minion      :1711][INFO    ][4911] Returning information for job: 20181025034648458201
2018-10-25 03:47:07,367 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025034707356324
2018-10-25 03:47:07,393 [salt.minion      :1432][INFO    ][6226] Starting a new job with PID 6226
2018-10-25 03:47:12,461 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034712449235
2018-10-25 03:47:12,480 [salt.minion      :1432][INFO    ][6231] Starting a new job with PID 6231
2018-10-25 03:47:12,509 [salt.minion      :1711][INFO    ][6231] Returning information for job: 20181025034712449235
2018-10-25 03:47:15,573 [salt.state       :915 ][INFO    ][6226] Loading fresh modules for state activity
2018-10-25 03:47:16,821 [salt.state       :1780][INFO    ][6226] Running state [redis-server] at time 03:47:16.821241
2018-10-25 03:47:16,822 [salt.state       :1813][INFO    ][6226] Executing state pkg.installed for [redis-server]
2018-10-25 03:47:16,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:47:17,404 [salt.state       :300 ][INFO    ][6226] All specified packages are already installed
2018-10-25 03:47:17,404 [salt.state       :1951][INFO    ][6226] Completed state [redis-server] at time 03:47:17.404886 duration_in_ms=583.645
2018-10-25 03:47:17,407 [salt.state       :1780][INFO    ][6226] Running state [vm.overcommit_memory] at time 03:47:17.407189
2018-10-25 03:47:17,408 [salt.state       :1813][INFO    ][6226] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-25 03:47:17,432 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-10-25 03:47:17,453 [salt.state       :300 ][INFO    ][6226] Sysctl value vm.overcommit_memory = 1 is already set
2018-10-25 03:47:17,454 [salt.state       :1951][INFO    ][6226] Completed state [vm.overcommit_memory] at time 03:47:17.454442 duration_in_ms=47.253
2018-10-25 03:47:17,464 [salt.state       :1780][INFO    ][6226] Running state [/etc/redis/redis.conf] at time 03:47:17.464145
2018-10-25 03:47:17,465 [salt.state       :1813][INFO    ][6226] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-25 03:47:17,577 [salt.state       :300 ][INFO    ][6226] File /etc/redis/redis.conf is in the correct state
2018-10-25 03:47:17,577 [salt.state       :1951][INFO    ][6226] Completed state [/etc/redis/redis.conf] at time 03:47:17.577559 duration_in_ms=113.414
2018-10-25 03:47:17,578 [salt.state       :1780][INFO    ][6226] Running state [redis-server] at time 03:47:17.578855
2018-10-25 03:47:17,579 [salt.state       :1813][INFO    ][6226] Executing state service.running for [redis-server]
2018-10-25 03:47:17,580 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-25 03:47:17,609 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-25 03:47:17,635 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-25 03:47:17,658 [salt.state       :300 ][INFO    ][6226] The service redis-server is already running
2018-10-25 03:47:17,659 [salt.state       :1951][INFO    ][6226] Completed state [redis-server] at time 03:47:17.659132 duration_in_ms=80.277
2018-10-25 03:47:17,660 [salt.state       :1780][INFO    ][6226] Running state [redis-sentinel] at time 03:47:17.660491
2018-10-25 03:47:17,661 [salt.state       :1813][INFO    ][6226] Executing state pkg.installed for [redis-sentinel]
2018-10-25 03:47:17,676 [salt.state       :300 ][INFO    ][6226] All specified packages are already installed
2018-10-25 03:47:17,677 [salt.state       :1951][INFO    ][6226] Completed state [redis-sentinel] at time 03:47:17.676991 duration_in_ms=16.5
2018-10-25 03:47:17,679 [salt.state       :1780][INFO    ][6226] Running state [/etc/redis/sentinel.conf] at time 03:47:17.679070
2018-10-25 03:47:17,679 [salt.state       :1813][INFO    ][6226] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-25 03:47:17,755 [salt.state       :300 ][INFO    ][6226] File /etc/redis/sentinel.conf is in the correct state
2018-10-25 03:47:17,755 [salt.state       :1951][INFO    ][6226] Completed state [/etc/redis/sentinel.conf] at time 03:47:17.755517 duration_in_ms=76.446
2018-10-25 03:47:17,756 [salt.state       :1780][INFO    ][6226] Running state [redis-sentinel] at time 03:47:17.756121
2018-10-25 03:47:17,756 [salt.state       :1813][INFO    ][6226] Executing state service.running for [redis-sentinel]
2018-10-25 03:47:17,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-25 03:47:17,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-25 03:47:17,813 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6226] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-25 03:47:17,836 [salt.state       :300 ][INFO    ][6226] The service redis-sentinel is already running
2018-10-25 03:47:17,837 [salt.state       :1951][INFO    ][6226] Completed state [redis-sentinel] at time 03:47:17.837613 duration_in_ms=81.492
2018-10-25 03:47:17,840 [salt.minion      :1711][INFO    ][6226] Returning information for job: 20181025034707356324
2018-10-25 03:47:32,296 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command test.ping with jid 20181025034732284791
2018-10-25 03:47:32,322 [salt.minion      :1432][INFO    ][6269] Starting a new job with PID 6269
2018-10-25 03:47:32,353 [salt.minion      :1711][INFO    ][6269] Returning information for job: 20181025034732284791
2018-10-25 03:49:10,190 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025034910173529
2018-10-25 03:49:10,210 [salt.minion      :1432][INFO    ][6284] Starting a new job with PID 6284
2018-10-25 03:49:15,313 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034915296879
2018-10-25 03:49:15,335 [salt.minion      :1432][INFO    ][6289] Starting a new job with PID 6289
2018-10-25 03:49:15,360 [salt.minion      :1711][INFO    ][6289] Returning information for job: 20181025034915296879
2018-10-25 03:49:17,906 [salt.state       :915 ][INFO    ][6284] Loading fresh modules for state activity
2018-10-25 03:49:17,984 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-25 03:49:18,037 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-25 03:49:18,133 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-25 03:49:18,175 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-25 03:49:18,212 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-25 03:49:18,341 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-25 03:49:18,441 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-25 03:49:18,542 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-25 03:49:18,710 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-25 03:49:18,824 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-25 03:49:18,910 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-25 03:49:18,993 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-25 03:49:20,040 [salt.state       :1780][INFO    ][6284] Running state [apache2] at time 03:49:20.040211
2018-10-25 03:49:20,041 [salt.state       :1813][INFO    ][6284] Executing state pkg.installed for [apache2]
2018-10-25 03:49:20,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:49:20,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-25 03:49:20,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 03:49:24,234 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:49:24,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-25 03:49:25,416 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034925401811
2018-10-25 03:49:25,439 [salt.minion      :1432][INFO    ][6714] Starting a new job with PID 6714
2018-10-25 03:49:25,459 [salt.minion      :1711][INFO    ][6714] Returning information for job: 20181025034925401811
2018-10-25 03:49:33,967 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:49:34,035 [salt.state       :300 ][INFO    ][6284] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-25 03:49:34,074 [salt.state       :915 ][INFO    ][6284] Loading fresh modules for state activity
2018-10-25 03:49:34,129 [salt.state       :1951][INFO    ][6284] Completed state [apache2] at time 03:49:34.129274 duration_in_ms=14089.064
2018-10-25 03:49:34,137 [salt.state       :1780][INFO    ][6284] Running state [openssl] at time 03:49:34.137170
2018-10-25 03:49:34,138 [salt.state       :1813][INFO    ][6284] Executing state pkg.installed for [openssl]
2018-10-25 03:49:35,064 [salt.state       :300 ][INFO    ][6284] All specified packages are already installed
2018-10-25 03:49:35,066 [salt.state       :1951][INFO    ][6284] Completed state [openssl] at time 03:49:35.065706 duration_in_ms=928.536
2018-10-25 03:49:35,067 [salt.state       :1780][INFO    ][6284] Running state [a2enmod rewrite] at time 03:49:35.067687
2018-10-25 03:49:35,068 [salt.state       :1813][INFO    ][6284] Executing state cmd.run for [a2enmod rewrite]
2018-10-25 03:49:35,069 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-25 03:49:35,158 [salt.state       :300 ][INFO    ][6284] {'pid': 7815, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-25 03:49:35,160 [salt.state       :1951][INFO    ][6284] Completed state [a2enmod rewrite] at time 03:49:35.160700 duration_in_ms=93.013
2018-10-25 03:49:35,162 [salt.state       :1780][INFO    ][6284] Running state [libapache2-mod-wsgi] at time 03:49:35.162613
2018-10-25 03:49:35,163 [salt.state       :1813][INFO    ][6284] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-25 03:49:35,202 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:49:35,242 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-25 03:49:35,579 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034935563288
2018-10-25 03:49:35,599 [salt.minion      :1432][INFO    ][7840] Starting a new job with PID 7840
2018-10-25 03:49:35,620 [salt.minion      :1711][INFO    ][7840] Returning information for job: 20181025034935563288
2018-10-25 03:49:40,906 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:49:40,967 [salt.state       :300 ][INFO    ][6284] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-25 03:49:40,995 [salt.state       :915 ][INFO    ][6284] Loading fresh modules for state activity
2018-10-25 03:49:41,055 [salt.state       :1951][INFO    ][6284] Completed state [libapache2-mod-wsgi] at time 03:49:41.055577 duration_in_ms=5892.964
2018-10-25 03:49:41,062 [salt.state       :1780][INFO    ][6284] Running state [a2enmod wsgi] at time 03:49:41.062076
2018-10-25 03:49:41,063 [salt.state       :1813][INFO    ][6284] Executing state cmd.run for [a2enmod wsgi]
2018-10-25 03:49:41,063 [salt.state       :300 ][INFO    ][6284] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-25 03:49:41,063 [salt.state       :1951][INFO    ][6284] Completed state [a2enmod wsgi] at time 03:49:41.063689 duration_in_ms=1.613
2018-10-25 03:49:41,070 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 03:49:41.070295
2018-10-25 03:49:41,070 [salt.state       :1813][INFO    ][6284] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-25 03:49:41,114 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-25 03:49:41,188 [salt.state       :300 ][INFO    ][6284] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-25 03:49:41,194 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 03:49:41.194390 duration_in_ms=124.094
2018-10-25 03:49:41,194 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 03:49:41.194671
2018-10-25 03:49:41,194 [salt.state       :1813][INFO    ][6284] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-25 03:49:41,195 [salt.state       :300 ][INFO    ][6284] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-25 03:49:41,195 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 03:49:41.195499 duration_in_ms=0.828
2018-10-25 03:49:41,195 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 03:49:41.195734
2018-10-25 03:49:41,195 [salt.state       :1813][INFO    ][6284] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-25 03:49:41,196 [salt.state       :300 ][INFO    ][6284] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-25 03:49:41,196 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 03:49:41.196532 duration_in_ms=0.798
2018-10-25 03:49:41,197 [salt.state       :1780][INFO    ][6284] Running state [a2enmod mpm_prefork] at time 03:49:41.197946
2018-10-25 03:49:41,200 [salt.state       :1813][INFO    ][6284] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-25 03:49:41,205 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-25 03:49:41,276 [salt.state       :300 ][INFO    ][6284] {'pid': 8151, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-25 03:49:41,276 [salt.state       :1951][INFO    ][6284] Completed state [a2enmod mpm_prefork] at time 03:49:41.276898 duration_in_ms=78.952
2018-10-25 03:49:41,277 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 03:49:41.277682
2018-10-25 03:49:41,278 [salt.state       :1813][INFO    ][6284] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-25 03:49:41,279 [salt.state       :300 ][INFO    ][6284] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-25 03:49:41,279 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 03:49:41.279654 duration_in_ms=1.972
2018-10-25 03:49:41,280 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 03:49:41.280574
2018-10-25 03:49:41,281 [salt.state       :1813][INFO    ][6284] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-25 03:49:41,281 [salt.state       :300 ][INFO    ][6284] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-25 03:49:41,282 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 03:49:41.282277 duration_in_ms=1.703
2018-10-25 03:49:41,284 [salt.state       :1780][INFO    ][6284] Running state [apache_server_service_task] at time 03:49:41.284910
2018-10-25 03:49:41,285 [salt.state       :1813][INFO    ][6284] Executing state test.show_notification for [apache_server_service_task]
2018-10-25 03:49:41,287 [salt.state       :300 ][INFO    ][6284] Running apache.server.service
2018-10-25 03:49:41,287 [salt.state       :1951][INFO    ][6284] Completed state [apache_server_service_task] at time 03:49:41.287744 duration_in_ms=2.834
2018-10-25 03:49:41,289 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/ports.conf] at time 03:49:41.288998
2018-10-25 03:49:41,289 [salt.state       :1813][INFO    ][6284] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-25 03:49:41,313 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-25 03:49:41,382 [salt.state       :300 ][INFO    ][6284] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-25 03:49:41,387 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/ports.conf] at time 03:49:41.387406 duration_in_ms=98.408
2018-10-25 03:49:41,388 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/conf-available/security.conf] at time 03:49:41.388181
2018-10-25 03:49:41,390 [salt.state       :1813][INFO    ][6284] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-25 03:49:41,412 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-25 03:49:41,488 [salt.state       :300 ][INFO    ][6284] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-25 03:49:41,496 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/conf-available/security.conf] at time 03:49:41.496039 duration_in_ms=107.857
2018-10-25 03:49:42,217 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 03:49:42.217152
2018-10-25 03:49:42,218 [salt.state       :1813][INFO    ][6284] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-25 03:49:42,218 [salt.state       :300 ][INFO    ][6284] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-25 03:49:42,219 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 03:49:42.219414 duration_in_ms=2.263
2018-10-25 03:49:42,220 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 03:49:42.220554
2018-10-25 03:49:42,221 [salt.state       :1813][INFO    ][6284] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-25 03:49:42,247 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-25 03:49:42,365 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-25 03:49:42,452 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-25 03:49:42,494 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-25 03:49:42,605 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-25 03:49:42,639 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-25 03:49:42,672 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-25 03:49:42,692 [salt.state       :300 ][INFO    ][6284] File changed:
New file
2018-10-25 03:49:42,693 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 03:49:42.693123 duration_in_ms=472.569
2018-10-25 03:49:42,693 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 03:49:42.693637
2018-10-25 03:49:42,693 [salt.state       :1813][INFO    ][6284] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-25 03:49:43,003 [salt.state       :300 ][INFO    ][6284] File changed:
New file
2018-10-25 03:49:43,003 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 03:49:43.003798 duration_in_ms=310.161
2018-10-25 03:49:43,006 [salt.state       :1780][INFO    ][6284] Running state [apache2] at time 03:49:43.006711
2018-10-25 03:49:43,007 [salt.state       :1813][INFO    ][6284] Executing state service.running for [apache2]
2018-10-25 03:49:43,008 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-25 03:49:43,040 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:49:43,071 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:49:43,101 [salt.state       :300 ][INFO    ][6284] The service apache2 is already running
2018-10-25 03:49:43,101 [salt.state       :1951][INFO    ][6284] Completed state [apache2] at time 03:49:43.101628 duration_in_ms=94.917
2018-10-25 03:49:43,102 [salt.state       :1780][INFO    ][6284] Running state [apache2] at time 03:49:43.102022
2018-10-25 03:49:43,102 [salt.state       :1813][INFO    ][6284] Executing state service.mod_watch for [apache2]
2018-10-25 03:49:43,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:49:43,129 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-25 03:49:43,342 [salt.state       :300 ][INFO    ][6284] {'apache2': True}
2018-10-25 03:49:43,342 [salt.state       :1951][INFO    ][6284] Completed state [apache2] at time 03:49:43.342850 duration_in_ms=240.828
2018-10-25 03:49:43,344 [salt.state       :1780][INFO    ][6284] Running state [/etc/apache2/conf-enabled/security.conf] at time 03:49:43.344596
2018-10-25 03:49:43,346 [salt.state       :1813][INFO    ][6284] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-25 03:49:43,356 [salt.state       :300 ][INFO    ][6284] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-25 03:49:43,357 [salt.state       :1951][INFO    ][6284] Completed state [/etc/apache2/conf-enabled/security.conf] at time 03:49:43.357151 duration_in_ms=12.555
2018-10-25 03:49:43,364 [salt.state       :1780][INFO    ][6284] Running state [gnocchi-common] at time 03:49:43.364624
2018-10-25 03:49:43,365 [salt.state       :1813][INFO    ][6284] Executing state pkg.installed for [gnocchi-common]
2018-10-25 03:49:43,713 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:49:43,751 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-25 03:49:45,742 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034945724374
2018-10-25 03:49:45,761 [salt.minion      :1432][INFO    ][8312] Starting a new job with PID 8312
2018-10-25 03:49:45,782 [salt.minion      :1711][INFO    ][8312] Returning information for job: 20181025034945724374
2018-10-25 03:49:55,906 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025034955886797
2018-10-25 03:49:55,932 [salt.minion      :1432][INFO    ][9117] Starting a new job with PID 9117
2018-10-25 03:49:55,958 [salt.minion      :1711][INFO    ][9117] Returning information for job: 20181025034955886797
2018-10-25 03:50:06,077 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035006065144
2018-10-25 03:50:06,107 [salt.minion      :1432][INFO    ][10240] Starting a new job with PID 10240
2018-10-25 03:50:06,128 [salt.minion      :1711][INFO    ][10240] Returning information for job: 20181025035006065144
2018-10-25 03:50:16,234 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035016218071
2018-10-25 03:50:16,256 [salt.minion      :1432][INFO    ][10767] Starting a new job with PID 10767
2018-10-25 03:50:16,276 [salt.minion      :1711][INFO    ][10767] Returning information for job: 20181025035016218071
2018-10-25 03:50:26,397 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035026382593
2018-10-25 03:50:26,412 [salt.minion      :1432][INFO    ][11211] Starting a new job with PID 11211
2018-10-25 03:50:26,432 [salt.minion      :1711][INFO    ][11211] Returning information for job: 20181025035026382593
2018-10-25 03:50:29,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:50:29,839 [salt.state       :300 ][INFO    ][6284] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp6'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-1.0~u16.04+mcp17'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp12'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-25 03:50:29,865 [salt.state       :915 ][INFO    ][6284] Loading fresh modules for state activity
2018-10-25 03:50:29,916 [salt.state       :1951][INFO    ][6284] Completed state [gnocchi-common] at time 03:50:29.916896 duration_in_ms=46552.271
2018-10-25 03:50:29,921 [salt.state       :1780][INFO    ][6284] Running state [gnocchi_ssl_mysql] at time 03:50:29.921276
2018-10-25 03:50:29,921 [salt.state       :1813][INFO    ][6284] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-25 03:50:29,921 [salt.state       :300 ][INFO    ][6284] Running gnocchi._ssl.mysql
2018-10-25 03:50:29,922 [salt.state       :1951][INFO    ][6284] Completed state [gnocchi_ssl_mysql] at time 03:50:29.922169 duration_in_ms=0.893
2018-10-25 03:50:29,924 [salt.state       :1780][INFO    ][6284] Running state [/etc/gnocchi/gnocchi.conf] at time 03:50:29.924598
2018-10-25 03:50:29,924 [salt.state       :1813][INFO    ][6284] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-25 03:50:29,959 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-25 03:50:30,080 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-25 03:50:30,104 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-25 03:50:30,152 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-25 03:50:30,202 [salt.fileclient  :1219][INFO    ][6284] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-25 03:50:30,213 [salt.state       :300 ][INFO    ][6284] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -411,36 +212,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -515,153 +286,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +450,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.32:6379

2018-10-25 03:50:30,214 [salt.state       :1951][INFO    ][6284] Completed state [/etc/gnocchi/gnocchi.conf] at time 03:50:30.213954 duration_in_ms=289.355
2018-10-25 03:50:30,221 [salt.state       :1780][INFO    ][6284] Running state [gnocchi-api] at time 03:50:30.220985
2018-10-25 03:50:30,221 [salt.state       :1813][INFO    ][6284] Executing state pkg.installed for [gnocchi-api]
2018-10-25 03:50:32,434 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:50:32,486 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-25 03:50:36,561 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035036548820
2018-10-25 03:50:36,588 [salt.minion      :1432][INFO    ][11962] Starting a new job with PID 11962
2018-10-25 03:50:36,608 [salt.minion      :1711][INFO    ][11962] Returning information for job: 20181025035036548820
2018-10-25 03:50:43,105 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:50:43,187 [salt.state       :300 ][INFO    ][6284] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp13'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-25 03:50:43,230 [salt.state       :915 ][INFO    ][6284] Loading fresh modules for state activity
2018-10-25 03:50:43,284 [salt.state       :1951][INFO    ][6284] Completed state [gnocchi-api] at time 03:50:43.284703 duration_in_ms=13063.717
2018-10-25 03:50:43,291 [salt.state       :1780][INFO    ][6284] Running state [gnocchi-metricd] at time 03:50:43.291332
2018-10-25 03:50:43,294 [salt.state       :1813][INFO    ][6284] Executing state pkg.installed for [gnocchi-metricd]
2018-10-25 03:50:45,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:50:45,449 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-25 03:50:46,730 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035046712623
2018-10-25 03:50:46,752 [salt.minion      :1432][INFO    ][12356] Starting a new job with PID 12356
2018-10-25 03:50:46,771 [salt.minion      :1711][INFO    ][12356] Returning information for job: 20181025035046712623
2018-10-25 03:50:49,152 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:50:49,235 [salt.state       :300 ][INFO    ][6284] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-25 03:50:49,279 [salt.state       :915 ][INFO    ][6284] Loading fresh modules for state activity
2018-10-25 03:50:49,570 [salt.state       :1951][INFO    ][6284] Completed state [gnocchi-metricd] at time 03:50:49.570579 duration_in_ms=6279.246
2018-10-25 03:50:49,579 [salt.state       :1780][INFO    ][6284] Running state [python-memcache] at time 03:50:49.579392
2018-10-25 03:50:49,579 [salt.state       :1813][INFO    ][6284] Executing state pkg.installed for [python-memcache]
2018-10-25 03:50:50,623 [salt.state       :300 ][INFO    ][6284] All specified packages are already installed
2018-10-25 03:50:50,624 [salt.state       :1951][INFO    ][6284] Completed state [python-memcache] at time 03:50:50.624391 duration_in_ms=1044.998
2018-10-25 03:50:50,626 [salt.state       :1780][INFO    ][6284] Running state [gnocchi-upgrade] at time 03:50:50.626562
2018-10-25 03:50:50,627 [salt.state       :1813][INFO    ][6284] Executing state cmd.run for [gnocchi-upgrade]
2018-10-25 03:50:50,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-25 03:50:53,126 [salt.state       :300 ][INFO    ][6284] {'pid': 12542, 'retcode': 0, 'stderr': '2018-10-25 03:50:52,372 [12547] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-25 03:50:52,849 [12547] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-10-25 03:50:53,027 [12547] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.32,port=6379,db=0>>>\n2018-10-25 03:50:53,030 [12547] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-25 03:50:53,129 [salt.state       :1951][INFO    ][6284] Completed state [gnocchi-upgrade] at time 03:50:53.129616 duration_in_ms=2503.053
2018-10-25 03:50:53,135 [salt.state       :1780][INFO    ][6284] Running state [wsgi_gnocchi] at time 03:50:53.135073
2018-10-25 03:50:53,135 [salt.state       :1813][INFO    ][6284] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-25 03:50:53,137 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-25 03:50:53,217 [salt.state       :300 ][INFO    ][6284] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-25 03:50:53,217 [salt.state       :1951][INFO    ][6284] Completed state [wsgi_gnocchi] at time 03:50:53.217853 duration_in_ms=82.78
2018-10-25 03:50:53,223 [salt.state       :1780][INFO    ][6284] Running state [apache2] at time 03:50:53.223016
2018-10-25 03:50:53,223 [salt.state       :1813][INFO    ][6284] Executing state service.running for [apache2]
2018-10-25 03:50:53,225 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:50:53,251 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:50:53,278 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-25 03:50:54,535 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:50:54,560 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:50:54,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:50:54,649 [salt.state       :300 ][INFO    ][6284] {'apache2': True}
2018-10-25 03:50:54,650 [salt.state       :1951][INFO    ][6284] Completed state [apache2] at time 03:50:54.650312 duration_in_ms=1427.295
2018-10-25 03:50:54,651 [salt.state       :1780][INFO    ][6284] Running state [gnocchi-metricd] at time 03:50:54.651901
2018-10-25 03:50:54,652 [salt.state       :1813][INFO    ][6284] Executing state service.running for [gnocchi-metricd]
2018-10-25 03:50:54,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-25 03:50:54,686 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:54,714 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:54,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:54,796 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:54,840 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:54,909 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:54,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:55,916 [salt.loaded.int.module.cmdmod:395 ][INFO    ][6284] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-25 03:50:55,946 [salt.state       :300 ][INFO    ][6284] {'gnocchi-metricd': True}
2018-10-25 03:50:55,947 [salt.state       :1951][INFO    ][6284] Completed state [gnocchi-metricd] at time 03:50:55.947026 duration_in_ms=1295.125
2018-10-25 03:50:55,953 [salt.minion      :1711][INFO    ][6284] Returning information for job: 20181025034910173529
2018-10-25 03:52:42,464 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command test.ping with jid 20181025035242453057
2018-10-25 03:52:42,488 [salt.minion      :1432][INFO    ][12841] Starting a new job with PID 12841
2018-10-25 03:52:42,516 [salt.minion      :1711][INFO    ][12841] Returning information for job: 20181025035242453057
2018-10-25 03:53:07,809 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025035307793980
2018-10-25 03:53:07,835 [salt.minion      :1432][INFO    ][12846] Starting a new job with PID 12846
2018-10-25 03:53:12,824 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035312812414
2018-10-25 03:53:12,847 [salt.minion      :1432][INFO    ][12851] Starting a new job with PID 12851
2018-10-25 03:53:12,868 [salt.minion      :1711][INFO    ][12851] Returning information for job: 20181025035312812414
2018-10-25 03:53:15,702 [salt.state       :915 ][INFO    ][12846] Loading fresh modules for state activity
2018-10-25 03:53:15,777 [salt.fileclient  :1219][INFO    ][12846] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-25 03:53:15,824 [salt.fileclient  :1219][INFO    ][12846] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-25 03:53:16,653 [salt.fileclient  :1219][INFO    ][12846] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-25 03:53:19,846 [salt.state       :1780][INFO    ][12846] Running state [apache2] at time 03:53:19.846088
2018-10-25 03:53:19,847 [salt.state       :1813][INFO    ][12846] Executing state pkg.installed for [apache2]
2018-10-25 03:53:19,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:53:20,490 [salt.state       :300 ][INFO    ][12846] All specified packages are already installed
2018-10-25 03:53:20,490 [salt.state       :1951][INFO    ][12846] Completed state [apache2] at time 03:53:20.490820 duration_in_ms=644.732
2018-10-25 03:53:20,491 [salt.state       :1780][INFO    ][12846] Running state [openssl] at time 03:53:20.491230
2018-10-25 03:53:20,491 [salt.state       :1813][INFO    ][12846] Executing state pkg.installed for [openssl]
2018-10-25 03:53:20,504 [salt.state       :300 ][INFO    ][12846] All specified packages are already installed
2018-10-25 03:53:20,504 [salt.state       :1951][INFO    ][12846] Completed state [openssl] at time 03:53:20.504356 duration_in_ms=13.126
2018-10-25 03:53:20,504 [salt.state       :1780][INFO    ][12846] Running state [a2enmod rewrite] at time 03:53:20.504857
2018-10-25 03:53:20,505 [salt.state       :1813][INFO    ][12846] Executing state cmd.run for [a2enmod rewrite]
2018-10-25 03:53:20,506 [salt.state       :300 ][INFO    ][12846] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-25 03:53:20,507 [salt.state       :1951][INFO    ][12846] Completed state [a2enmod rewrite] at time 03:53:20.507039 duration_in_ms=2.182
2018-10-25 03:53:20,507 [salt.state       :1780][INFO    ][12846] Running state [libapache2-mod-wsgi] at time 03:53:20.507491
2018-10-25 03:53:20,507 [salt.state       :1813][INFO    ][12846] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-25 03:53:20,519 [salt.state       :300 ][INFO    ][12846] All specified packages are already installed
2018-10-25 03:53:20,520 [salt.state       :1951][INFO    ][12846] Completed state [libapache2-mod-wsgi] at time 03:53:20.519979 duration_in_ms=12.488
2018-10-25 03:53:20,520 [salt.state       :1780][INFO    ][12846] Running state [a2enmod wsgi] at time 03:53:20.520436
2018-10-25 03:53:20,520 [salt.state       :1813][INFO    ][12846] Executing state cmd.run for [a2enmod wsgi]
2018-10-25 03:53:20,521 [salt.state       :300 ][INFO    ][12846] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-25 03:53:20,521 [salt.state       :1951][INFO    ][12846] Completed state [a2enmod wsgi] at time 03:53:20.521240 duration_in_ms=0.804
2018-10-25 03:53:20,527 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 03:53:20.527150
2018-10-25 03:53:20,527 [salt.state       :1813][INFO    ][12846] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-25 03:53:20,847 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-25 03:53:20,847 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 03:53:20.847555 duration_in_ms=320.405
2018-10-25 03:53:20,847 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 03:53:20.847852
2018-10-25 03:53:20,848 [salt.state       :1813][INFO    ][12846] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-25 03:53:20,848 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-25 03:53:20,849 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 03:53:20.848993 duration_in_ms=1.141
2018-10-25 03:53:20,849 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 03:53:20.849226
2018-10-25 03:53:20,849 [salt.state       :1813][INFO    ][12846] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-25 03:53:20,849 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-25 03:53:20,849 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 03:53:20.849943 duration_in_ms=0.716
2018-10-25 03:53:20,850 [salt.state       :1780][INFO    ][12846] Running state [a2enmod mpm_prefork] at time 03:53:20.850691
2018-10-25 03:53:20,850 [salt.state       :1813][INFO    ][12846] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-25 03:53:20,851 [salt.state       :300 ][INFO    ][12846] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-25 03:53:20,851 [salt.state       :1951][INFO    ][12846] Completed state [a2enmod mpm_prefork] at time 03:53:20.851490 duration_in_ms=0.799
2018-10-25 03:53:20,851 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 03:53:20.851724
2018-10-25 03:53:20,851 [salt.state       :1813][INFO    ][12846] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-25 03:53:20,852 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-25 03:53:20,852 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 03:53:20.852451 duration_in_ms=0.728
2018-10-25 03:53:20,852 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 03:53:20.852678
2018-10-25 03:53:20,852 [salt.state       :1813][INFO    ][12846] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-25 03:53:20,853 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-25 03:53:20,853 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 03:53:20.853393 duration_in_ms=0.715
2018-10-25 03:53:20,854 [salt.state       :1780][INFO    ][12846] Running state [apache_server_service_task] at time 03:53:20.854211
2018-10-25 03:53:20,854 [salt.state       :1813][INFO    ][12846] Executing state test.show_notification for [apache_server_service_task]
2018-10-25 03:53:20,854 [salt.state       :300 ][INFO    ][12846] Running apache.server.service
2018-10-25 03:53:20,854 [salt.state       :1951][INFO    ][12846] Completed state [apache_server_service_task] at time 03:53:20.854900 duration_in_ms=0.689
2018-10-25 03:53:20,855 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/ports.conf] at time 03:53:20.855684
2018-10-25 03:53:20,855 [salt.state       :1813][INFO    ][12846] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-25 03:53:20,937 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/ports.conf is in the correct state
2018-10-25 03:53:20,937 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/ports.conf] at time 03:53:20.937214 duration_in_ms=81.53
2018-10-25 03:53:20,937 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/conf-available/security.conf] at time 03:53:20.937654
2018-10-25 03:53:20,937 [salt.state       :1813][INFO    ][12846] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-25 03:53:21,025 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-25 03:53:21,025 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/conf-available/security.conf] at time 03:53:21.025261 duration_in_ms=87.606
2018-10-25 03:53:21,033 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 03:53:21.033141
2018-10-25 03:53:21,033 [salt.state       :1813][INFO    ][12846] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-25 03:53:21,034 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-25 03:53:21,035 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 03:53:21.034966 duration_in_ms=1.825
2018-10-25 03:53:21,035 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 03:53:21.035409
2018-10-25 03:53:21,035 [salt.state       :1813][INFO    ][12846] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-25 03:53:21,340 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-25 03:53:21,341 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 03:53:21.341165 duration_in_ms=305.755
2018-10-25 03:53:21,341 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 03:53:21.341651
2018-10-25 03:53:21,341 [salt.state       :1813][INFO    ][12846] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-25 03:53:21,671 [salt.state       :300 ][INFO    ][12846] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-25 03:53:21,671 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 03:53:21.671355 duration_in_ms=329.704
2018-10-25 03:53:21,673 [salt.state       :1780][INFO    ][12846] Running state [apache2] at time 03:53:21.673236
2018-10-25 03:53:21,673 [salt.state       :1813][INFO    ][12846] Executing state service.running for [apache2]
2018-10-25 03:53:21,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-25 03:53:21,721 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:53:21,747 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:53:21,774 [salt.state       :300 ][INFO    ][12846] The service apache2 is already running
2018-10-25 03:53:21,775 [salt.state       :1951][INFO    ][12846] Completed state [apache2] at time 03:53:21.775105 duration_in_ms=101.869
2018-10-25 03:53:21,776 [salt.state       :1780][INFO    ][12846] Running state [/etc/apache2/conf-enabled/security.conf] at time 03:53:21.776854
2018-10-25 03:53:21,777 [salt.state       :1813][INFO    ][12846] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-25 03:53:21,781 [salt.state       :300 ][INFO    ][12846] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-25 03:53:21,782 [salt.state       :1951][INFO    ][12846] Completed state [/etc/apache2/conf-enabled/security.conf] at time 03:53:21.781996 duration_in_ms=5.143
2018-10-25 03:53:21,783 [salt.state       :1780][INFO    ][12846] Running state [panko-api] at time 03:53:21.783546
2018-10-25 03:53:21,783 [salt.state       :1813][INFO    ][12846] Executing state pkg.installed for [panko-api]
2018-10-25 03:53:21,815 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-25 03:53:21,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 03:53:22,905 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035322888017
2018-10-25 03:53:22,929 [salt.minion      :1432][INFO    ][13187] Starting a new job with PID 13187
2018-10-25 03:53:22,951 [salt.minion      :1711][INFO    ][13187] Returning information for job: 20181025035322888017
2018-10-25 03:53:24,605 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:53:24,648 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-25 03:53:28,807 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:53:28,873 [salt.state       :300 ][INFO    ][12846] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-25 03:53:28,923 [salt.state       :915 ][INFO    ][12846] Loading fresh modules for state activity
2018-10-25 03:53:28,982 [salt.state       :1951][INFO    ][12846] Completed state [panko-api] at time 03:53:28.982601 duration_in_ms=7199.055
2018-10-25 03:53:28,986 [salt.state       :1780][INFO    ][12846] Running state [panko_ssl_mysql] at time 03:53:28.986652
2018-10-25 03:53:28,987 [salt.state       :1813][INFO    ][12846] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-25 03:53:28,988 [salt.state       :300 ][INFO    ][12846] Running panko._ssl.mysql
2018-10-25 03:53:28,988 [salt.state       :1951][INFO    ][12846] Completed state [panko_ssl_mysql] at time 03:53:28.988946 duration_in_ms=2.294
2018-10-25 03:53:28,991 [salt.state       :1780][INFO    ][12846] Running state [/etc/panko/panko.conf] at time 03:53:28.991646
2018-10-25 03:53:28,992 [salt.state       :1813][INFO    ][12846] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-25 03:53:29,025 [salt.fileclient  :1219][INFO    ][12846] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-25 03:53:29,091 [salt.fileclient  :1219][INFO    ][12846] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-25 03:53:29,120 [salt.fileclient  :1219][INFO    ][12846] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-25 03:53:29,249 [salt.state       :300 ][INFO    ][12846] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -362,36 +377,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -466,110 +451,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-25 03:53:29,257 [salt.state       :1951][INFO    ][12846] Completed state [/etc/panko/panko.conf] at time 03:53:29.257250 duration_in_ms=265.603
2018-10-25 03:53:29,261 [salt.state       :1780][INFO    ][12846] Running state [/usr/bin/panko-expirer --use-syslog] at time 03:53:29.261484
2018-10-25 03:53:29,261 [salt.state       :1813][INFO    ][12846] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-10-25 03:53:29,295 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command 'crontab -u panko -l' in directory '/root'
2018-10-25 03:53:29,368 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command 'crontab -u panko /tmp/__salt.tmp.q7Yqi7' in directory '/root'
2018-10-25 03:53:29,418 [salt.state       :300 ][INFO    ][12846] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-10-25 03:53:29,418 [salt.state       :1951][INFO    ][12846] Completed state [/usr/bin/panko-expirer --use-syslog] at time 03:53:29.418775 duration_in_ms=157.29
2018-10-25 03:53:29,421 [salt.state       :1780][INFO    ][12846] Running state [panko-dbsync] at time 03:53:29.421075
2018-10-25 03:53:29,421 [salt.state       :1813][INFO    ][12846] Executing state cmd.run for [panko-dbsync]
2018-10-25 03:53:29,422 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command 'panko-dbsync' in directory '/root'
2018-10-25 03:53:31,428 [salt.state       :300 ][INFO    ][12846] {'pid': 13494, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-25 03:53:31,429 [salt.state       :1951][INFO    ][12846] Completed state [panko-dbsync] at time 03:53:31.429100 duration_in_ms=2008.024
2018-10-25 03:53:31,438 [salt.state       :1780][INFO    ][12846] Running state [wsgi_panko] at time 03:53:31.438942
2018-10-25 03:53:31,439 [salt.state       :1813][INFO    ][12846] Executing state apache_site.enabled for [wsgi_panko]
2018-10-25 03:53:31,440 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-25 03:53:31,519 [salt.state       :300 ][INFO    ][12846] {'new': 'wsgi_panko', 'old': None}
2018-10-25 03:53:31,520 [salt.state       :1951][INFO    ][12846] Completed state [wsgi_panko] at time 03:53:31.520266 duration_in_ms=81.324
2018-10-25 03:53:32,272 [salt.state       :1780][INFO    ][12846] Running state [apache2] at time 03:53:32.272522
2018-10-25 03:53:32,273 [salt.state       :1813][INFO    ][12846] Executing state service.running for [apache2]
2018-10-25 03:53:32,275 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:53:32,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:53:32,333 [salt.state       :300 ][INFO    ][12846] The service apache2 is already running
2018-10-25 03:53:32,333 [salt.state       :1951][INFO    ][12846] Completed state [apache2] at time 03:53:32.333506 duration_in_ms=60.985
2018-10-25 03:53:32,334 [salt.state       :1780][INFO    ][12846] Running state [apache2] at time 03:53:32.334187
2018-10-25 03:53:32,334 [salt.state       :1813][INFO    ][12846] Executing state service.mod_watch for [apache2]
2018-10-25 03:53:32,335 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:53:32,361 [salt.loaded.int.module.cmdmod:395 ][INFO    ][12846] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-25 03:53:33,056 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035333040421
2018-10-25 03:53:33,080 [salt.minion      :1432][INFO    ][13553] Starting a new job with PID 13553
2018-10-25 03:53:33,101 [salt.minion      :1711][INFO    ][13553] Returning information for job: 20181025035333040421
2018-10-25 03:53:34,756 [salt.state       :300 ][INFO    ][12846] {'apache2': True}
2018-10-25 03:53:34,757 [salt.state       :1951][INFO    ][12846] Completed state [apache2] at time 03:53:34.757035 duration_in_ms=2422.847
2018-10-25 03:53:34,763 [salt.minion      :1711][INFO    ][12846] Returning information for job: 20181025035307793980
2018-10-25 03:54:02,366 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command test.ping with jid 20181025035402354424
2018-10-25 03:54:02,388 [salt.minion      :1432][INFO    ][13659] Starting a new job with PID 13659
2018-10-25 03:54:02,417 [salt.minion      :1711][INFO    ][13659] Returning information for job: 20181025035402354424
2018-10-25 03:55:32,307 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025035532297022
2018-10-25 03:55:32,327 [salt.minion      :1432][INFO    ][13664] Starting a new job with PID 13664
2018-10-25 03:55:37,320 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035537307837
2018-10-25 03:55:37,338 [salt.minion      :1432][INFO    ][13669] Starting a new job with PID 13669
2018-10-25 03:55:37,360 [salt.minion      :1711][INFO    ][13669] Returning information for job: 20181025035537307837
2018-10-25 03:55:40,410 [salt.state       :915 ][INFO    ][13664] Loading fresh modules for state activity
2018-10-25 03:55:40,488 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-25 03:55:40,532 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-25 03:55:40,739 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-25 03:55:40,821 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-25 03:55:44,799 [salt.state       :1780][INFO    ][13664] Running state [aodh-api] at time 03:55:44.799240
2018-10-25 03:55:44,800 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [aodh-api]
2018-10-25 03:55:44,801 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:55:45,427 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-25 03:55:45,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 03:55:47,394 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035547379883
2018-10-25 03:55:47,417 [salt.minion      :1432][INFO    ][14042] Starting a new job with PID 14042
2018-10-25 03:55:47,440 [salt.minion      :1711][INFO    ][14042] Returning information for job: 20181025035547379883
2018-10-25 03:55:48,358 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:55:48,402 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-25 03:55:57,553 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035557541994
2018-10-25 03:55:57,577 [salt.minion      :1432][INFO    ][14382] Starting a new job with PID 14382
2018-10-25 03:55:57,600 [salt.minion      :1711][INFO    ][14382] Returning information for job: 20181025035557541994
2018-10-25 03:56:07,419 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:56:07,495 [salt.state       :300 ][INFO    ][13664] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'c++-compiler' changed from 'absent' to '1'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'binutils-gold' changed from 'absent' to '1'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-138.164'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev' changed from 'absent' to '1'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-25 03:56:07,549 [salt.state       :915 ][INFO    ][13664] Loading fresh modules for state activity
2018-10-25 03:56:07,719 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035607703312
2018-10-25 03:56:07,744 [salt.minion      :1432][INFO    ][19278] Starting a new job with PID 19278
2018-10-25 03:56:07,764 [salt.minion      :1711][INFO    ][19278] Returning information for job: 20181025035607703312
2018-10-25 03:56:07,850 [salt.state       :1951][INFO    ][13664] Completed state [aodh-api] at time 03:56:07.850591 duration_in_ms=23051.351
2018-10-25 03:56:07,859 [salt.state       :1780][INFO    ][13664] Running state [aodh-evaluator] at time 03:56:07.858962
2018-10-25 03:56:07,859 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [aodh-evaluator]
2018-10-25 03:56:08,911 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:56:08,956 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-25 03:56:13,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:56:13,276 [salt.state       :300 ][INFO    ][13664] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-25 03:56:13,315 [salt.state       :915 ][INFO    ][13664] Loading fresh modules for state activity
2018-10-25 03:56:13,367 [salt.state       :1951][INFO    ][13664] Completed state [aodh-evaluator] at time 03:56:13.367729 duration_in_ms=5508.766
2018-10-25 03:56:13,375 [salt.state       :1780][INFO    ][13664] Running state [aodh-notifier] at time 03:56:13.375646
2018-10-25 03:56:13,376 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [aodh-notifier]
2018-10-25 03:56:14,946 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:56:14,991 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-25 03:56:17,890 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035617873870
2018-10-25 03:56:17,920 [salt.minion      :1432][INFO    ][19834] Starting a new job with PID 19834
2018-10-25 03:56:17,955 [salt.minion      :1711][INFO    ][19834] Returning information for job: 20181025035617873870
2018-10-25 03:56:19,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:56:19,217 [salt.state       :300 ][INFO    ][13664] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-25 03:56:19,255 [salt.state       :915 ][INFO    ][13664] Loading fresh modules for state activity
2018-10-25 03:56:19,306 [salt.state       :1951][INFO    ][13664] Completed state [aodh-notifier] at time 03:56:19.306188 duration_in_ms=5930.542
2018-10-25 03:56:19,313 [salt.state       :1780][INFO    ][13664] Running state [aodh-listener] at time 03:56:19.313893
2018-10-25 03:56:19,314 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [aodh-listener]
2018-10-25 03:56:20,651 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:56:20,696 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-25 03:56:24,732 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:56:24,797 [salt.state       :300 ][INFO    ][13664] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-25 03:56:24,837 [salt.state       :915 ][INFO    ][13664] Loading fresh modules for state activity
2018-10-25 03:56:24,894 [salt.state       :1951][INFO    ][13664] Completed state [aodh-listener] at time 03:56:24.894656 duration_in_ms=5580.762
2018-10-25 03:56:24,901 [salt.state       :1780][INFO    ][13664] Running state [python-aodhclient] at time 03:56:24.901926
2018-10-25 03:56:24,911 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [python-aodhclient]
2018-10-25 03:56:26,204 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:56:26,252 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-25 03:56:28,091 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035628072282
2018-10-25 03:56:28,109 [salt.minion      :1432][INFO    ][20276] Starting a new job with PID 20276
2018-10-25 03:56:28,132 [salt.minion      :1711][INFO    ][20276] Returning information for job: 20181025035628072282
2018-10-25 03:56:28,959 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:56:29,031 [salt.state       :300 ][INFO    ][13664] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-25 03:56:29,072 [salt.state       :915 ][INFO    ][13664] Loading fresh modules for state activity
2018-10-25 03:56:29,134 [salt.state       :1951][INFO    ][13664] Completed state [python-aodhclient] at time 03:56:29.134315 duration_in_ms=4232.39
2018-10-25 03:56:29,137 [salt.state       :1780][INFO    ][13664] Running state [aodh_ssl_mysql] at time 03:56:29.137919
2018-10-25 03:56:29,138 [salt.state       :1813][INFO    ][13664] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-25 03:56:29,138 [salt.state       :300 ][INFO    ][13664] Running aodh._ssl.mysql
2018-10-25 03:56:29,139 [salt.state       :1951][INFO    ][13664] Completed state [aodh_ssl_mysql] at time 03:56:29.139205 duration_in_ms=1.286
2018-10-25 03:56:29,142 [salt.state       :1780][INFO    ][13664] Running state [aodh_ssl_rabbitmq] at time 03:56:29.141785
2018-10-25 03:56:29,142 [salt.state       :1813][INFO    ][13664] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-25 03:56:29,142 [salt.state       :300 ][INFO    ][13664] Running aodh._ssl.rabbitmq
2018-10-25 03:56:29,143 [salt.state       :1951][INFO    ][13664] Completed state [aodh_ssl_rabbitmq] at time 03:56:29.143169 duration_in_ms=1.383
2018-10-25 03:56:29,151 [salt.state       :1780][INFO    ][13664] Running state [apache2] at time 03:56:29.151400
2018-10-25 03:56:29,151 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [apache2]
2018-10-25 03:56:30,158 [salt.state       :300 ][INFO    ][13664] All specified packages are already installed
2018-10-25 03:56:30,159 [salt.state       :1951][INFO    ][13664] Completed state [apache2] at time 03:56:30.159257 duration_in_ms=1007.856
2018-10-25 03:56:30,159 [salt.state       :1780][INFO    ][13664] Running state [openssl] at time 03:56:30.159618
2018-10-25 03:56:30,159 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [openssl]
2018-10-25 03:56:30,172 [salt.state       :300 ][INFO    ][13664] All specified packages are already installed
2018-10-25 03:56:30,173 [salt.state       :1951][INFO    ][13664] Completed state [openssl] at time 03:56:30.172979 duration_in_ms=13.361
2018-10-25 03:56:30,174 [salt.state       :1780][INFO    ][13664] Running state [a2enmod rewrite] at time 03:56:30.174160
2018-10-25 03:56:30,174 [salt.state       :1813][INFO    ][13664] Executing state cmd.run for [a2enmod rewrite]
2018-10-25 03:56:30,174 [salt.state       :300 ][INFO    ][13664] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-25 03:56:30,175 [salt.state       :1951][INFO    ][13664] Completed state [a2enmod rewrite] at time 03:56:30.175061 duration_in_ms=0.901
2018-10-25 03:56:30,176 [salt.state       :1780][INFO    ][13664] Running state [libapache2-mod-wsgi] at time 03:56:30.175948
2018-10-25 03:56:30,176 [salt.state       :1813][INFO    ][13664] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-25 03:56:30,188 [salt.state       :300 ][INFO    ][13664] All specified packages are already installed
2018-10-25 03:56:30,188 [salt.state       :1951][INFO    ][13664] Completed state [libapache2-mod-wsgi] at time 03:56:30.188309 duration_in_ms=12.361
2018-10-25 03:56:30,188 [salt.state       :1780][INFO    ][13664] Running state [a2enmod wsgi] at time 03:56:30.188823
2018-10-25 03:56:30,189 [salt.state       :1813][INFO    ][13664] Executing state cmd.run for [a2enmod wsgi]
2018-10-25 03:56:30,190 [salt.state       :300 ][INFO    ][13664] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-25 03:56:30,190 [salt.state       :1951][INFO    ][13664] Completed state [a2enmod wsgi] at time 03:56:30.190373 duration_in_ms=1.55
2018-10-25 03:56:30,197 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 03:56:30.197360
2018-10-25 03:56:30,197 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-25 03:56:30,292 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-25 03:56:30,292 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 03:56:30.292845 duration_in_ms=95.485
2018-10-25 03:56:30,293 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 03:56:30.293099
2018-10-25 03:56:30,293 [salt.state       :1813][INFO    ][13664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-25 03:56:30,293 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-25 03:56:30,293 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 03:56:30.293927 duration_in_ms=0.828
2018-10-25 03:56:30,294 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 03:56:30.294187
2018-10-25 03:56:30,294 [salt.state       :1813][INFO    ][13664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-25 03:56:30,294 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-25 03:56:30,294 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 03:56:30.294923 duration_in_ms=0.736
2018-10-25 03:56:30,296 [salt.state       :1780][INFO    ][13664] Running state [a2enmod mpm_prefork] at time 03:56:30.296182
2018-10-25 03:56:30,296 [salt.state       :1813][INFO    ][13664] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-25 03:56:30,296 [salt.state       :300 ][INFO    ][13664] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-25 03:56:30,297 [salt.state       :1951][INFO    ][13664] Completed state [a2enmod mpm_prefork] at time 03:56:30.297007 duration_in_ms=0.826
2018-10-25 03:56:30,297 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 03:56:30.297248
2018-10-25 03:56:30,297 [salt.state       :1813][INFO    ][13664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-25 03:56:30,297 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-25 03:56:30,298 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 03:56:30.297983 duration_in_ms=0.735
2018-10-25 03:56:30,298 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 03:56:30.298236
2018-10-25 03:56:30,298 [salt.state       :1813][INFO    ][13664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-25 03:56:30,298 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-25 03:56:30,299 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 03:56:30.298971 duration_in_ms=0.734
2018-10-25 03:56:30,299 [salt.state       :1780][INFO    ][13664] Running state [apache_server_service_task] at time 03:56:30.299197
2018-10-25 03:56:30,299 [salt.state       :1813][INFO    ][13664] Executing state test.show_notification for [apache_server_service_task]
2018-10-25 03:56:30,299 [salt.state       :300 ][INFO    ][13664] Running apache.server.service
2018-10-25 03:56:30,299 [salt.state       :1951][INFO    ][13664] Completed state [apache_server_service_task] at time 03:56:30.299887 duration_in_ms=0.689
2018-10-25 03:56:30,300 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/ports.conf] at time 03:56:30.300760
2018-10-25 03:56:30,301 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-25 03:56:30,390 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/ports.conf is in the correct state
2018-10-25 03:56:30,391 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/ports.conf] at time 03:56:30.391372 duration_in_ms=90.61
2018-10-25 03:56:30,391 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/conf-available/security.conf] at time 03:56:30.391915
2018-10-25 03:56:30,392 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-25 03:56:30,485 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-25 03:56:30,486 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/conf-available/security.conf] at time 03:56:30.486120 duration_in_ms=94.204
2018-10-25 03:56:30,499 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 03:56:30.499166
2018-10-25 03:56:30,499 [salt.state       :1813][INFO    ][13664] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-25 03:56:30,500 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-25 03:56:30,500 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 03:56:30.500726 duration_in_ms=1.56
2018-10-25 03:56:30,501 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 03:56:30.501250
2018-10-25 03:56:30,501 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-25 03:56:30,820 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-25 03:56:30,821 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 03:56:30.821843 duration_in_ms=320.593
2018-10-25 03:56:30,822 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 03:56:30.822434
2018-10-25 03:56:30,823 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-25 03:56:31,122 [salt.state       :300 ][INFO    ][13664] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-25 03:56:31,123 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 03:56:31.123502 duration_in_ms=301.067
2018-10-25 03:56:31,127 [salt.state       :1780][INFO    ][13664] Running state [apache2] at time 03:56:31.127012
2018-10-25 03:56:31,127 [salt.state       :1813][INFO    ][13664] Executing state service.running for [apache2]
2018-10-25 03:56:31,128 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-25 03:56:31,159 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:56:31,186 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:56:31,218 [salt.state       :300 ][INFO    ][13664] The service apache2 is already running
2018-10-25 03:56:31,220 [salt.state       :1951][INFO    ][13664] Completed state [apache2] at time 03:56:31.219816 duration_in_ms=92.803
2018-10-25 03:56:31,222 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/conf-enabled/security.conf] at time 03:56:31.222920
2018-10-25 03:56:31,224 [salt.state       :1813][INFO    ][13664] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-25 03:56:31,229 [salt.state       :300 ][INFO    ][13664] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-25 03:56:31,230 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/conf-enabled/security.conf] at time 03:56:31.230346 duration_in_ms=7.426
2018-10-25 03:56:31,232 [salt.state       :1780][INFO    ][13664] Running state [/etc/aodh/aodh.conf] at time 03:56:31.232681
2018-10-25 03:56:31,233 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-25 03:56:31,261 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-25 03:56:31,349 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-25 03:56:31,502 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-25 03:56:31,527 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-25 03:56:31,583 [salt.state       :300 ][INFO    ][13664] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -671,36 +930,6 @@
 # undefined, tokens will instead be cached in-process. (list value)
 # Deprecated group/name - [keystone_authtoken]/memcache_servers
 #memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# DEPRECATED: Determines the frequency at which the list of revoked tokens is
-# retrieved from the Identity service (in seconds). A high number of revocation
-# events combined with a low cache duration may significantly reduce
-# performance. Only valid for PKI tokens. This option has been deprecated in
-# the Ocata release and will be removed in the P release. (integer value)
-# This option is deprecated for removal since Ocata.
-# Its value may be silently ignored in the future.
-# Reason: PKI token format is no longer supported.
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Possible values:
-# None - <No description provided>
-# MAC - <No description provided>
-# ENCRYPT - <No description provided>
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
 
 # (Optional) Number of seconds memcached server is considered dead before it is
 # tried again. (integer value)
@@ -775,995 +1004,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-25 03:56:31,585 [salt.state       :1951][INFO    ][13664] Completed state [/etc/aodh/aodh.conf] at time 03:56:31.585442 duration_in_ms=352.76
2018-10-25 03:56:31,586 [salt.state       :1780][INFO    ][13664] Running state [/etc/default/aodh-evaluator] at time 03:56:31.586043
2018-10-25 03:56:31,586 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-25 03:56:31,610 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-25 03:56:31,626 [salt.state       :300 ][INFO    ][13664] File changed:
New file
2018-10-25 03:56:31,626 [salt.state       :1951][INFO    ][13664] Completed state [/etc/default/aodh-evaluator] at time 03:56:31.626734 duration_in_ms=40.691
2018-10-25 03:56:31,628 [salt.state       :1780][INFO    ][13664] Running state [/etc/default/aodh-notifier] at time 03:56:31.628369
2018-10-25 03:56:31,628 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-25 03:56:31,660 [salt.state       :300 ][INFO    ][13664] File changed:
New file
2018-10-25 03:56:31,660 [salt.state       :1951][INFO    ][13664] Completed state [/etc/default/aodh-notifier] at time 03:56:31.660363 duration_in_ms=31.994
2018-10-25 03:56:31,661 [salt.state       :1780][INFO    ][13664] Running state [/etc/default/aodh-listener] at time 03:56:31.661084
2018-10-25 03:56:31,661 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-25 03:56:31,691 [salt.state       :300 ][INFO    ][13664] File changed:
New file
2018-10-25 03:56:31,692 [salt.state       :1951][INFO    ][13664] Completed state [/etc/default/aodh-listener] at time 03:56:31.691939 duration_in_ms=30.855
2018-10-25 03:56:31,693 [salt.state       :1780][INFO    ][13664] Running state [aodh-dbsync] at time 03:56:31.693729
2018-10-25 03:56:31,694 [salt.state       :1813][INFO    ][13664] Executing state cmd.run for [aodh-dbsync]
2018-10-25 03:56:31,694 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command 'aodh-dbsync' in directory '/root'
2018-10-25 03:56:34,396 [salt.state       :300 ][INFO    ][13664] {'pid': 20357, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-25 03:56:34.228 20358 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-25 03:56:34.228 20358 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-25 03:56:34,398 [salt.state       :1951][INFO    ][13664] Completed state [aodh-dbsync] at time 03:56:34.397878 duration_in_ms=2704.148
2018-10-25 03:56:34,404 [salt.state       :1780][INFO    ][13664] Running state [/usr/bin/aodh-expirer] at time 03:56:34.404109
2018-10-25 03:56:34,405 [salt.state       :1813][INFO    ][13664] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-10-25 03:56:34,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command 'crontab -u aodh -l' in directory '/root'
2018-10-25 03:56:34,433 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command 'crontab -u aodh /tmp/__salt.tmp.xr6hux' in directory '/root'
2018-10-25 03:56:34,455 [salt.state       :300 ][INFO    ][13664] {'aodh': '/usr/bin/aodh-expirer'}
2018-10-25 03:56:34,456 [salt.state       :1951][INFO    ][13664] Completed state [/usr/bin/aodh-expirer] at time 03:56:34.455909 duration_in_ms=51.8
2018-10-25 03:56:34,457 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 03:56:34.457767
2018-10-25 03:56:34,458 [salt.state       :1813][INFO    ][13664] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-25 03:56:34,490 [salt.fileclient  :1219][INFO    ][13664] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-25 03:56:34,558 [salt.state       :300 ][INFO    ][13664] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-25 03:56:34,558 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 03:56:34.558451 duration_in_ms=100.685
2018-10-25 03:56:34,558 [salt.state       :1780][INFO    ][13664] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 03:56:34.558712
2018-10-25 03:56:34,559 [salt.state       :1813][INFO    ][13664] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-25 03:56:34,562 [salt.state       :300 ][INFO    ][13664] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-25 03:56:34,562 [salt.state       :1951][INFO    ][13664] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 03:56:34.562208 duration_in_ms=3.496
2018-10-25 03:56:34,563 [salt.state       :1780][INFO    ][13664] Running state [apache2] at time 03:56:34.563375
2018-10-25 03:56:34,564 [salt.state       :1813][INFO    ][13664] Executing state service.running for [apache2]
2018-10-25 03:56:34,565 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:56:34,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-25 03:56:34,622 [salt.state       :300 ][INFO    ][13664] The service apache2 is already running
2018-10-25 03:56:34,623 [salt.state       :1951][INFO    ][13664] Completed state [apache2] at time 03:56:34.622968 duration_in_ms=59.593
2018-10-25 03:56:34,623 [salt.state       :1780][INFO    ][13664] Running state [apache2] at time 03:56:34.623332
2018-10-25 03:56:34,623 [salt.state       :1813][INFO    ][13664] Executing state service.mod_watch for [apache2]
2018-10-25 03:56:34,625 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-25 03:56:34,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-25 03:56:37,049 [salt.state       :300 ][INFO    ][13664] {'apache2': True}
2018-10-25 03:56:37,049 [salt.state       :1951][INFO    ][13664] Completed state [apache2] at time 03:56:37.049491 duration_in_ms=2426.159
2018-10-25 03:56:37,054 [salt.state       :1780][INFO    ][13664] Running state [aodh-evaluator] at time 03:56:37.053965
2018-10-25 03:56:37,059 [salt.state       :1813][INFO    ][13664] Executing state service.running for [aodh-evaluator]
2018-10-25 03:56:37,060 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-25 03:56:37,084 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-25 03:56:37,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-25 03:56:37,135 [salt.state       :300 ][INFO    ][13664] The service aodh-evaluator is already running
2018-10-25 03:56:37,136 [salt.state       :1951][INFO    ][13664] Completed state [aodh-evaluator] at time 03:56:37.136684 duration_in_ms=82.719
2018-10-25 03:56:37,137 [salt.state       :1780][INFO    ][13664] Running state [aodh-evaluator] at time 03:56:37.137082
2018-10-25 03:56:37,137 [salt.state       :1813][INFO    ][13664] Executing state service.mod_watch for [aodh-evaluator]
2018-10-25 03:56:37,138 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-25 03:56:37,160 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-25 03:56:37,325 [salt.state       :300 ][INFO    ][13664] {'aodh-evaluator': True}
2018-10-25 03:56:37,331 [salt.state       :1951][INFO    ][13664] Completed state [aodh-evaluator] at time 03:56:37.325919 duration_in_ms=188.836
2018-10-25 03:56:37,333 [salt.state       :1780][INFO    ][13664] Running state [aodh-notifier] at time 03:56:37.333488
2018-10-25 03:56:37,333 [salt.state       :1813][INFO    ][13664] Executing state service.running for [aodh-notifier]
2018-10-25 03:56:37,334 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-25 03:56:37,379 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-25 03:56:37,406 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-25 03:56:37,464 [salt.state       :300 ][INFO    ][13664] The service aodh-notifier is already running
2018-10-25 03:56:37,464 [salt.state       :1951][INFO    ][13664] Completed state [aodh-notifier] at time 03:56:37.464596 duration_in_ms=131.107
2018-10-25 03:56:37,464 [salt.state       :1780][INFO    ][13664] Running state [aodh-notifier] at time 03:56:37.464917
2018-10-25 03:56:37,465 [salt.state       :1813][INFO    ][13664] Executing state service.mod_watch for [aodh-notifier]
2018-10-25 03:56:37,474 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-25 03:56:37,510 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-25 03:56:38,256 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035638240639
2018-10-25 03:56:38,281 [salt.minion      :1432][INFO    ][20589] Starting a new job with PID 20589
2018-10-25 03:56:38,342 [salt.minion      :1711][INFO    ][20589] Returning information for job: 20181025035638240639
2018-10-25 03:56:48,457 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035648438637
2018-10-25 03:56:48,480 [salt.minion      :1432][INFO    ][20651] Starting a new job with PID 20651
2018-10-25 03:56:48,518 [salt.minion      :1711][INFO    ][20651] Returning information for job: 20181025035648438637
2018-10-25 03:56:52,787 [salt.state       :300 ][INFO    ][13664] {'aodh-notifier': True}
2018-10-25 03:56:52,794 [salt.state       :1951][INFO    ][13664] Completed state [aodh-notifier] at time 03:56:52.794664 duration_in_ms=15329.747
2018-10-25 03:56:52,797 [salt.state       :1780][INFO    ][13664] Running state [aodh-listener] at time 03:56:52.797362
2018-10-25 03:56:52,801 [salt.state       :1813][INFO    ][13664] Executing state service.running for [aodh-listener]
2018-10-25 03:56:52,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-25 03:56:52,841 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-25 03:56:52,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-25 03:56:52,890 [salt.state       :300 ][INFO    ][13664] The service aodh-listener is already running
2018-10-25 03:56:52,891 [salt.state       :1951][INFO    ][13664] Completed state [aodh-listener] at time 03:56:52.891516 duration_in_ms=94.153
2018-10-25 03:56:52,893 [salt.state       :1780][INFO    ][13664] Running state [aodh-listener] at time 03:56:52.893047
2018-10-25 03:56:52,894 [salt.state       :1813][INFO    ][13664] Executing state service.mod_watch for [aodh-listener]
2018-10-25 03:56:52,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-25 03:56:52,920 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13664] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-25 03:56:58,650 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035658632607
2018-10-25 03:56:58,675 [salt.minion      :1432][INFO    ][20719] Starting a new job with PID 20719
2018-10-25 03:56:58,704 [salt.minion      :1711][INFO    ][20719] Returning information for job: 20181025035658632607
2018-10-25 03:57:08,030 [salt.state       :300 ][INFO    ][13664] {'aodh-listener': True}
2018-10-25 03:57:08,032 [salt.state       :1951][INFO    ][13664] Completed state [aodh-listener] at time 03:57:08.031426 duration_in_ms=15138.378
2018-10-25 03:57:08,048 [salt.minion      :1711][INFO    ][13664] Returning information for job: 20181025035532297022
2018-10-25 03:58:43,725 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command state.sls with jid 20181025035843713754
2018-10-25 03:58:43,747 [salt.minion      :1432][INFO    ][20786] Starting a new job with PID 20786
2018-10-25 03:58:48,817 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035848804588
2018-10-25 03:58:48,840 [salt.minion      :1432][INFO    ][20791] Starting a new job with PID 20791
2018-10-25 03:58:48,860 [salt.minion      :1711][INFO    ][20791] Returning information for job: 20181025035848804588
2018-10-25 03:58:51,959 [salt.state       :915 ][INFO    ][20786] Loading fresh modules for state activity
2018-10-25 03:58:52,080 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-25 03:58:52,115 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-25 03:58:52,333 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/_ssl/rabbitmq.sls'
2018-10-25 03:58:56,506 [salt.state       :1780][INFO    ][20786] Running state [ceilometer-agent-central] at time 03:58:56.506134
2018-10-25 03:58:56,506 [salt.state       :1813][INFO    ][20786] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-25 03:58:56,508 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:58:57,150 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-25 03:58:57,345 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-25 03:58:59,026 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035859011910
2018-10-25 03:58:59,073 [salt.minion      :1432][INFO    ][21146] Starting a new job with PID 21146
2018-10-25 03:58:59,106 [salt.minion      :1711][INFO    ][21146] Returning information for job: 20181025035859011910
2018-10-25 03:59:00,068 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:59:00,129 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-25 03:59:09,053 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035909042984
2018-10-25 03:59:09,069 [salt.minion      :1432][INFO    ][21709] Starting a new job with PID 21709
2018-10-25 03:59:09,091 [salt.minion      :1711][INFO    ][21709] Returning information for job: 20181025035909042984
2018-10-25 03:59:19,261 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035919248288
2018-10-25 03:59:19,288 [salt.minion      :1432][INFO    ][23066] Starting a new job with PID 23066
2018-10-25 03:59:19,346 [salt.minion      :1711][INFO    ][23066] Returning information for job: 20181025035919248288
2018-10-25 03:59:25,224 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:59:25,393 [salt.state       :300 ][INFO    ][20786] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-25 03:59:25,428 [salt.state       :915 ][INFO    ][20786] Loading fresh modules for state activity
2018-10-25 03:59:25,709 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer-agent-central] at time 03:59:25.709649 duration_in_ms=29203.523
2018-10-25 03:59:25,719 [salt.state       :1780][INFO    ][20786] Running state [python-ceilometerclient] at time 03:59:25.719837
2018-10-25 03:59:25,721 [salt.state       :1813][INFO    ][20786] Executing state pkg.installed for [python-ceilometerclient]
2018-10-25 03:59:26,746 [salt.state       :300 ][INFO    ][20786] All specified packages are already installed
2018-10-25 03:59:26,747 [salt.state       :1951][INFO    ][20786] Completed state [python-ceilometerclient] at time 03:59:26.747753 duration_in_ms=1027.913
2018-10-25 03:59:26,748 [salt.state       :1780][INFO    ][20786] Running state [ceilometer-agent-notification] at time 03:59:26.748401
2018-10-25 03:59:26,748 [salt.state       :1813][INFO    ][20786] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-25 03:59:26,783 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-25 03:59:26,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-25 03:59:29,280 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035929269427
2018-10-25 03:59:29,298 [salt.minion      :1432][INFO    ][23488] Starting a new job with PID 23488
2018-10-25 03:59:29,346 [salt.minion      :1711][INFO    ][23488] Returning information for job: 20181025035929269427
2018-10-25 03:59:31,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-25 03:59:31,084 [salt.state       :300 ][INFO    ][20786] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-25 03:59:31,122 [salt.state       :915 ][INFO    ][20786] Loading fresh modules for state activity
2018-10-25 03:59:31,169 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer-agent-notification] at time 03:59:31.169900 duration_in_ms=4421.499
2018-10-25 03:59:31,173 [salt.state       :1780][INFO    ][20786] Running state [ceilometer_ssl_rabbitmq] at time 03:59:31.173702
2018-10-25 03:59:31,174 [salt.state       :1813][INFO    ][20786] Executing state test.show_notification for [ceilometer_ssl_rabbitmq]
2018-10-25 03:59:31,175 [salt.state       :300 ][INFO    ][20786] Running ceilometer._ssl.rabbitmq
2018-10-25 03:59:31,175 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer_ssl_rabbitmq] at time 03:59:31.175646 duration_in_ms=1.944
2018-10-25 03:59:31,184 [salt.state       :1780][INFO    ][20786] Running state [/etc/ceilometer/ceilometer.conf] at time 03:59:31.184305
2018-10-25 03:59:31,184 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-25 03:59:31,246 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-25 03:59:31,558 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-25 03:59:31,584 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-25 03:59:31,654 [salt.state       :300 ][INFO    ][20786] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-25 03:59:31,656 [salt.state       :1951][INFO    ][20786] Completed state [/etc/ceilometer/ceilometer.conf] at time 03:59:31.656714 duration_in_ms=472.407
2018-10-25 03:59:31,657 [salt.state       :1780][INFO    ][20786] Running state [/etc/default/ceilometer-agent-central] at time 03:59:31.657166
2018-10-25 03:59:31,657 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-25 03:59:31,700 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-25 03:59:31,742 [salt.state       :300 ][INFO    ][20786] File changed:
New file
2018-10-25 03:59:31,742 [salt.state       :1951][INFO    ][20786] Completed state [/etc/default/ceilometer-agent-central] at time 03:59:31.742629 duration_in_ms=85.462
2018-10-25 03:59:31,743 [salt.state       :1780][INFO    ][20786] Running state [/etc/default/ceilometer-agent-notification] at time 03:59:31.743102
2018-10-25 03:59:31,743 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-25 03:59:31,821 [salt.state       :300 ][INFO    ][20786] File changed:
New file
2018-10-25 03:59:31,821 [salt.state       :1951][INFO    ][20786] Completed state [/etc/default/ceilometer-agent-notification] at time 03:59:31.821725 duration_in_ms=78.622
2018-10-25 03:59:31,845 [salt.state       :1780][INFO    ][20786] Running state [python-gnocchiclient] at time 03:59:31.845021
2018-10-25 03:59:31,845 [salt.state       :1813][INFO    ][20786] Executing state pkg.latest for [python-gnocchiclient]
2018-10-25 03:59:31,862 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-25 03:59:32,405 [salt.state       :300 ][INFO    ][20786] Package python-gnocchiclient is already up-to-date
2018-10-25 03:59:32,422 [salt.state       :1951][INFO    ][20786] Completed state [python-gnocchiclient] at time 03:59:32.422801 duration_in_ms=577.78
2018-10-25 03:59:32,424 [salt.state       :1780][INFO    ][20786] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 03:59:32.424366
2018-10-25 03:59:32,424 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-10-25 03:59:32,456 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-10-25 03:59:32,492 [salt.state       :300 ][INFO    ][20786] File changed:
New file
2018-10-25 03:59:32,493 [salt.state       :1951][INFO    ][20786] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 03:59:32.492962 duration_in_ms=68.596
2018-10-25 03:59:32,496 [salt.state       :1780][INFO    ][20786] Running state [ceilometer-upgrade] at time 03:59:32.496889
2018-10-25 03:59:32,499 [salt.state       :1813][INFO    ][20786] Executing state cmd.run for [ceilometer-upgrade]
2018-10-25 03:59:32,500 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command 'ceilometer-upgrade' in directory '/root'
2018-10-25 03:59:39,454 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035939437603
2018-10-25 03:59:39,477 [salt.minion      :1432][INFO    ][23633] Starting a new job with PID 23633
2018-10-25 03:59:39,498 [salt.minion      :1711][INFO    ][23633] Returning information for job: 20181025035939437603
2018-10-25 03:59:49,674 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command saltutil.find_job with jid 20181025035949653426
2018-10-25 03:59:49,708 [salt.minion      :1432][INFO    ][23639] Starting a new job with PID 23639
2018-10-25 03:59:49,746 [salt.minion      :1711][INFO    ][23639] Returning information for job: 20181025035949653426
2018-10-25 03:59:50,524 [salt.state       :300 ][INFO    ][20786] {'pid': 23621, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-25 03:59:50,526 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer-upgrade] at time 03:59:50.526145 duration_in_ms=18029.255
2018-10-25 03:59:50,527 [salt.state       :1780][INFO    ][20786] Running state [/etc/ceilometer/pipeline.yaml] at time 03:59:50.527544
2018-10-25 03:59:50,528 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-25 03:59:50,559 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-25 03:59:50,669 [salt.state       :300 ][INFO    ][20786] File changed:
New file
2018-10-25 03:59:50,670 [salt.state       :1951][INFO    ][20786] Completed state [/etc/ceilometer/pipeline.yaml] at time 03:59:50.670807 duration_in_ms=143.262
2018-10-25 03:59:50,671 [salt.state       :1780][INFO    ][20786] Running state [/etc/ceilometer/event_pipeline.yaml] at time 03:59:50.671331
2018-10-25 03:59:50,671 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-25 03:59:50,701 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-25 03:59:50,795 [salt.state       :300 ][INFO    ][20786] File changed:
New file
2018-10-25 03:59:50,795 [salt.state       :1951][INFO    ][20786] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 03:59:50.795296 duration_in_ms=123.965
2018-10-25 03:59:50,795 [salt.state       :1780][INFO    ][20786] Running state [/etc/ceilometer/event_definitions.yaml] at time 03:59:50.795955
2018-10-25 03:59:50,796 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-25 03:59:50,823 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-25 03:59:50,843 [salt.state       :300 ][INFO    ][20786] File changed:
New file
2018-10-25 03:59:50,843 [salt.state       :1951][INFO    ][20786] Completed state [/etc/ceilometer/event_definitions.yaml] at time 03:59:50.843624 duration_in_ms=47.669
2018-10-25 03:59:50,844 [salt.state       :1780][INFO    ][20786] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 03:59:50.844228
2018-10-25 03:59:50,844 [salt.state       :1813][INFO    ][20786] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-25 03:59:50,869 [salt.fileclient  :1219][INFO    ][20786] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-25 03:59:50,882 [salt.state       :300 ][INFO    ][20786] File changed:
New file
2018-10-25 03:59:50,883 [salt.state       :1951][INFO    ][20786] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 03:59:50.883099 duration_in_ms=38.871
2018-10-25 03:59:51,679 [salt.state       :1780][INFO    ][20786] Running state [ceilometer-agent-central] at time 03:59:51.679588
2018-10-25 03:59:51,681 [salt.state       :1813][INFO    ][20786] Executing state service.running for [ceilometer-agent-central]
2018-10-25 03:59:51,682 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-25 03:59:51,714 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-25 03:59:51,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-25 03:59:51,782 [salt.state       :300 ][INFO    ][20786] The service ceilometer-agent-central is already running
2018-10-25 03:59:51,783 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer-agent-central] at time 03:59:51.783253 duration_in_ms=103.666
2018-10-25 03:59:51,783 [salt.state       :1780][INFO    ][20786] Running state [ceilometer-agent-central] at time 03:59:51.783855
2018-10-25 03:59:51,784 [salt.state       :1813][INFO    ][20786] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-25 03:59:51,786 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-25 03:59:51,813 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-25 03:59:52,102 [salt.state       :300 ][INFO    ][20786] {'ceilometer-agent-central': True}
2018-10-25 03:59:52,103 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer-agent-central] at time 03:59:52.103428 duration_in_ms=319.572
2018-10-25 03:59:52,105 [salt.state       :1780][INFO    ][20786] Running state [ceilometer-agent-notification] at time 03:59:52.105379
2018-10-25 03:59:52,105 [salt.state       :1813][INFO    ][20786] Executing state service.running for [ceilometer-agent-notification]
2018-10-25 03:59:52,109 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-25 03:59:52,142 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-25 03:59:52,165 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-25 03:59:52,191 [salt.state       :300 ][INFO    ][20786] The service ceilometer-agent-notification is already running
2018-10-25 03:59:52,193 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer-agent-notification] at time 03:59:52.193491 duration_in_ms=88.112
2018-10-25 03:59:52,193 [salt.state       :1780][INFO    ][20786] Running state [ceilometer-agent-notification] at time 03:59:52.193853
2018-10-25 03:59:52,194 [salt.state       :1813][INFO    ][20786] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-25 03:59:52,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-25 03:59:52,217 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20786] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-25 03:59:52,416 [salt.state       :300 ][INFO    ][20786] {'ceilometer-agent-notification': True}
2018-10-25 03:59:52,419 [salt.state       :1951][INFO    ][20786] Completed state [ceilometer-agent-notification] at time 03:59:52.419825 duration_in_ms=225.971
2018-10-25 03:59:52,425 [salt.minion      :1711][INFO    ][20786] Returning information for job: 20181025035843713754
2018-10-25 04:06:53,098 [salt.minion      :1308][INFO    ][16224] User sudo_ubuntu Executing command cp.push_dir with jid 20181025040653082119
2018-10-25 04:06:53,129 [salt.minion      :1432][INFO    ][23802] Starting a new job with PID 23802
