2018-10-16 18:52:31,558 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:31,698 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:31,706 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:31,713 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:31,720 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,086 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,091 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,095 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,161 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,164 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,168 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,171 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,394 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,446 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,451 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,455 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,459 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,465 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,469 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,475 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,480 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,486 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,491 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,498 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,503 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,508 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,513 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,518 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,522 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,527 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,532 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,537 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,542 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,547 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,552 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,557 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,562 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,567 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,571 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,576 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,582 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,587 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,592 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,598 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,602 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,607 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,614 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,619 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,626 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,630 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,636 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,640 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,646 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,650 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,655 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,660 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:32,664 [salt.utils.decorators:82  ][ERROR   ][1678] Exception encountered when attempting to inspect frame in dependency decorator: list index out of range
2018-10-16 18:52:59,542 [salt.utils.decorators:613 ][WARNING ][1678] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-16 18:53:03,574 [salt.loaded.int.states.file:2150][WARNING ][1678] State for file: /etc/aodh/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-16 18:53:05,423 [salt.loaded.int.states.file:2150][WARNING ][1678] State for file: /etc/aodh/ssl/rabbitmq/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-16 18:53:07,681 [salt.loaded.int.states.file:2150][WARNING ][1678] State for file: /etc/panko/ssl/mysql/ca-cert.pem - Neither 'source' nor 'contents' nor 'contents_pillar' nor 'contents_grains' was defined, yet 'replace' was set to 'True'. As there is no source to replace the file with, 'replace' has been set to 'False' to avoid reading the file unnecessarily.
2018-10-16 18:53:12,639 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2889] Executing command ['systemctl', 'status', 'salt-minion.service', '-n', '0'] in directory '/root'
2018-10-16 18:53:12,674 [salt.loaded.int.module.cmdmod:395 ][INFO    ][2889] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'salt-minion.service'] in directory '/root'
2018-10-16 18:53:12,705 [salt.utils.parsers:1051][WARNING ][1320] Minion received a SIGTERM. Exiting.
2018-10-16 18:53:13,767 [salt.cli.daemons :293 ][INFO    ][2953] Setting up the Salt Minion "mdb01.mcp-ovs-ha.local"
2018-10-16 18:53:13,928 [salt.cli.daemons :82  ][INFO    ][2953] Starting up the Salt Minion
2018-10-16 18:53:13,930 [salt.utils.event :1017][INFO    ][2953] Starting pull socket on /var/run/salt/minion/minion_event_b0741cc873_pull.ipc
2018-10-16 18:53:14,895 [salt.minion      :976 ][INFO    ][2953] Creating minion process manager
2018-10-16 18:53:16,635 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][2953] Executing command ['date', '+%z'] in directory '/root'
2018-10-16 18:53:16,669 [salt.utils.schedule:568 ][INFO    ][2953] Updating job settings for scheduled job: __mine_interval
2018-10-16 18:53:16,671 [salt.minion      :1107][INFO    ][2953] Added mine.update to scheduler
2018-10-16 18:53:16,677 [salt.minion      :1965][INFO    ][2953] Minion is starting as user 'root'
2018-10-16 18:53:16,696 [salt.minion      :2324][INFO    ][2953] Minion is ready to receive requests!
2018-10-16 18:53:54,682 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.apply with jid 20181016185354667225
2018-10-16 18:53:54,711 [salt.minion      :1431][INFO    ][3038] Starting a new job with PID 3038
2018-10-16 18:54:00,916 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185400904456
2018-10-16 18:54:00,940 [salt.minion      :1431][INFO    ][3043] Starting a new job with PID 3043
2018-10-16 18:54:00,965 [salt.minion      :1708][INFO    ][3043] Returning information for job: 20181016185400904456
2018-10-16 18:54:03,999 [salt.state       :905 ][INFO    ][3038] Loading fresh modules for state activity
2018-10-16 18:54:08,642 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/init.sls'
2018-10-16 18:54:08,687 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/init.sls'
2018-10-16 18:54:10,079 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/env.sls'
2018-10-16 18:54:10,208 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/profile.sls'
2018-10-16 18:54:10,339 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/repo.sls'
2018-10-16 18:54:11,082 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185411072637
2018-10-16 18:54:11,109 [salt.minion      :1431][INFO    ][3060] Starting a new job with PID 3060
2018-10-16 18:54:11,134 [salt.minion      :1708][INFO    ][3060] Returning information for job: 20181016185411072637
2018-10-16 18:54:12,128 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/package.sls'
2018-10-16 18:54:13,271 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/timezone.sls'
2018-10-16 18:54:13,413 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/kernel.sls'
2018-10-16 18:54:13,583 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/grub.sls'
2018-10-16 18:54:13,615 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/cpu.sls'
2018-10-16 18:54:13,750 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/sysfs.sls'
2018-10-16 18:54:13,901 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/locale.sls'
2018-10-16 18:54:15,636 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/user.sls'
2018-10-16 18:54:16,285 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/group.sls'
2018-10-16 18:54:16,428 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/limit.sls'
2018-10-16 18:54:16,562 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/systemd.sls'
2018-10-16 18:54:16,694 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/apt.sls'
2018-10-16 18:54:16,833 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/system/banner.sls'
2018-10-16 18:54:16,955 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/network/init.sls'
2018-10-16 18:54:17,082 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/network/hostname.sls'
2018-10-16 18:54:17,209 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/network/host.sls'
2018-10-16 18:54:17,463 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/network/interface.sls'
2018-10-16 18:54:17,739 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/network/proxy.sls'
2018-10-16 18:54:17,868 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/storage/init.sls'
2018-10-16 18:54:17,995 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'ntp/init.sls'
2018-10-16 18:54:18,020 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'ntp/client.sls'
2018-10-16 18:54:18,073 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'ntp/server.sls'
2018-10-16 18:54:18,145 [salt.state       :1770][INFO    ][3038] Running state [/etc/environment] at time 18:54:18.144956
2018-10-16 18:54:18,145 [salt.state       :1803][INFO    ][3038] Executing state file.blockreplace for [/etc/environment]
2018-10-16 18:54:18,154 [salt.state       :290 ][INFO    ][3038] File changed:
--- 
+++ 
@@ -1 +1,4 @@
 PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
+# SALT MANAGED VARIABLES - DO NOT EDIT - START
+# 
+# SALT MANAGED VARIABLES - END

2018-10-16 18:54:18,154 [salt.state       :1941][INFO    ][3038] Completed state [/etc/environment] at time 18:54:18.154286 duration_in_ms=9.331
2018-10-16 18:54:18,154 [salt.state       :1770][INFO    ][3038] Running state [/etc/profile.d] at time 18:54:18.154545
2018-10-16 18:54:18,154 [salt.state       :1803][INFO    ][3038] Executing state file.directory for [/etc/profile.d]
2018-10-16 18:54:18,157 [salt.state       :290 ][INFO    ][3038] Directory /etc/profile.d is in the correct state
Directory /etc/profile.d updated
2018-10-16 18:54:18,157 [salt.state       :1941][INFO    ][3038] Completed state [/etc/profile.d] at time 18:54:18.157828 duration_in_ms=3.283
2018-10-16 18:54:18,927 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 18:54:18.926949
2018-10-16 18:54:18,927 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/apt/apt.conf.d/99prefer_ipv4-salt]
2018-10-16 18:54:19,808 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/files/apt.conf'
2018-10-16 18:54:19,834 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:19,835 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/apt.conf.d/99prefer_ipv4-salt] at time 18:54:19.835484 duration_in_ms=908.536
2018-10-16 18:54:19,835 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 18:54:19.835782
2018-10-16 18:54:19,836 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/apt/apt.conf.d/99allow_downgrades-salt]
2018-10-16 18:54:19,866 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:19,868 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/apt.conf.d/99allow_downgrades-salt] at time 18:54:19.867983 duration_in_ms=32.201
2018-10-16 18:54:19,870 [salt.state       :1770][INFO    ][3038] Running state [linux_repo_prereq_pkgs] at time 18:54:19.870448
2018-10-16 18:54:19,870 [salt.state       :1803][INFO    ][3038] Executing state pkg.installed for [linux_repo_prereq_pkgs]
2018-10-16 18:54:19,871 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:54:20,328 [salt.state       :290 ][INFO    ][3038] All specified packages are already installed
2018-10-16 18:54:20,329 [salt.state       :1941][INFO    ][3038] Completed state [linux_repo_prereq_pkgs] at time 18:54:20.329402 duration_in_ms=458.953
2018-10-16 18:54:20,329 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/apt.conf.d/99proxies-salt] at time 18:54:20.329877
2018-10-16 18:54:20,330 [salt.state       :1803][INFO    ][3038] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt]
2018-10-16 18:54:20,330 [salt.state       :290 ][INFO    ][3038] File /etc/apt/apt.conf.d/99proxies-salt is not present
2018-10-16 18:54:20,331 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/apt.conf.d/99proxies-salt] at time 18:54:20.331058 duration_in_ms=1.181
2018-10-16 18:54:20,331 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 18:54:20.331314
2018-10-16 18:54:20,331 [salt.state       :1803][INFO    ][3038] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack]
2018-10-16 18:54:20,332 [salt.state       :290 ][INFO    ][3038] File /etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack is not present
2018-10-16 18:54:20,332 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/apt.conf.d/99proxies-salt-mirantis_openstack] at time 18:54:20.332927 duration_in_ms=1.612
2018-10-16 18:54:20,333 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/preferences.d/mirantis_openstack] at time 18:54:20.333195
2018-10-16 18:54:20,333 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/apt/preferences.d/mirantis_openstack]
2018-10-16 18:54:20,354 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/files/preferences_repo'
2018-10-16 18:54:20,465 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:20,466 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/preferences.d/mirantis_openstack] at time 18:54:20.466090 duration_in_ms=132.894
2018-10-16 18:54:20,469 [salt.state       :1770][INFO    ][3038] Running state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 18:54:20.469801
2018-10-16 18:54:20,470 [salt.state       :1803][INFO    ][3038] Executing state pkgrepo.managed for [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main]
2018-10-16 18:54:20,825 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['apt-key', 'add', '/var/cache/salt/minion/extrn_files/base/mirror.mirantis.com/nightly/openstack-queens/xenial/archive-queens.key'] in directory '/root'
2018-10-16 18:54:21,178 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185421160724
2018-10-16 18:54:21,218 [salt.minion      :1431][INFO    ][3182] Starting a new job with PID 3182
2018-10-16 18:54:21,249 [salt.minion      :1708][INFO    ][3182] Returning information for job: 20181016185421160724
2018-10-16 18:54:21,370 [salt.state       :290 ][INFO    ][3038] {'repo': 'deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main'}
2018-10-16 18:54:21,374 [salt.state       :1941][INFO    ][3038] Completed state [deb http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial main] at time 18:54:21.373974 duration_in_ms=904.173
2018-10-16 18:54:21,374 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 18:54:21.374405
2018-10-16 18:54:21,374 [salt.state       :1803][INFO    ][3038] Executing state file.absent for [/etc/apt/apt.conf.d/99proxies-salt-uca]
2018-10-16 18:54:21,375 [salt.state       :290 ][INFO    ][3038] File /etc/apt/apt.conf.d/99proxies-salt-uca is not present
2018-10-16 18:54:21,375 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/apt.conf.d/99proxies-salt-uca] at time 18:54:21.375895 duration_in_ms=1.49
2018-10-16 18:54:21,376 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/preferences.d/uca] at time 18:54:21.376137
2018-10-16 18:54:21,376 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/apt/preferences.d/uca]
2018-10-16 18:54:21,511 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:21,512 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/preferences.d/uca] at time 18:54:21.512743 duration_in_ms=136.605
2018-10-16 18:54:21,515 [salt.state       :1770][INFO    ][3038] Running state [echo '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' | base64 -d | apt-key add -] at time 18:54:21.515483
2018-10-16 18:54:21,516 [salt.state       :1803][INFO    ][3038] Executing state cmd.run for [echo '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' | base64 -d | apt-key add -]
2018-10-16 18:54:21,516 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'echo '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' | base64 -d | apt-key add -' in directory '/root'
2018-10-16 18:54:21,806 [salt.state       :290 ][INFO    ][3038] {'pid': 3257, 'retcode': 0, 'stderr': '', 'stdout': 'OK'}
2018-10-16 18:54:21,807 [salt.state       :1941][INFO    ][3038] Completed state [echo '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' | base64 -d | apt-key add -] at time 18:54:21.807284 duration_in_ms=291.8
2018-10-16 18:54:21,813 [salt.state       :1770][INFO    ][3038] Running state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 18:54:21.813374
2018-10-16 18:54:21,813 [salt.state       :1803][INFO    ][3038] Executing state pkgrepo.managed for [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main]
2018-10-16 18:54:21,937 [salt.state       :290 ][INFO    ][3038] {'repo': 'deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main'}
2018-10-16 18:54:21,938 [salt.state       :1941][INFO    ][3038] Completed state [deb http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens main] at time 18:54:21.938426 duration_in_ms=125.051
2018-10-16 18:54:21,940 [salt.state       :1770][INFO    ][3038] Running state [pkg.refresh_db] at time 18:54:21.940252
2018-10-16 18:54:21,940 [salt.state       :1803][INFO    ][3038] Executing state module.run for [pkg.refresh_db]
2018-10-16 18:54:21,941 [salt.utils.decorators:613 ][WARNING ][3038] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-16 18:54:21,942 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 18:54:26,841 [salt.state       :290 ][INFO    ][3038] {'ret': {'http://security.ubuntu.com/ubuntu xenial-security InRelease': None, 'http://archive.ubuntu.com/ubuntu xenial-backports InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial/main amd64 Packages': True, 'http://archive.ubuntu.com/ubuntu xenial-updates InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens/main amd64 Packages': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release.gpg': True, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens InRelease': False, 'http://repo.saltstack.com/apt/ubuntu/16.04/amd64/2017.7 xenial InRelease': None, 'http://ubuntu-cloud.archive.canonical.com/ubuntu xenial-updates/queens Release': True, 'http://archive.ubuntu.com/ubuntu xenial InRelease': None, 'http://mirror.mirantis.com/nightly/openstack-queens/xenial xenial InRelease': True}}
2018-10-16 18:54:26,842 [salt.state       :1941][INFO    ][3038] Completed state [pkg.refresh_db] at time 18:54:26.842192 duration_in_ms=4901.94
2018-10-16 18:54:26,843 [salt.state       :1770][INFO    ][3038] Running state [linux_extra_packages_latest] at time 18:54:26.843254
2018-10-16 18:54:26,843 [salt.state       :1803][INFO    ][3038] Executing state pkg.latest for [linux_extra_packages_latest]
2018-10-16 18:54:26,863 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['apt-cache', '-q', 'policy', 'python-tornado'] in directory '/root'
2018-10-16 18:54:27,025 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 18:54:27,054 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-tornado'] in directory '/root'
2018-10-16 18:54:31,017 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:54:31,080 [salt.state       :290 ][INFO    ][3038] Made the following changes:
'python-singledispatch' changed from 'absent' to '3.4.0.3-2'
'python-tornado' changed from '4.2.1-2~ds+1' to '4.5.3-1.0~u16.04+mcp1'
'python-backports-abc' changed from 'absent' to '0.5-2.0~u16.04+mcp1'

2018-10-16 18:54:31,109 [salt.state       :905 ][INFO    ][3038] Loading fresh modules for state activity
2018-10-16 18:54:31,168 [salt.state       :1941][INFO    ][3038] Completed state [linux_extra_packages_latest] at time 18:54:31.168869 duration_in_ms=4325.615
2018-10-16 18:54:31,175 [salt.state       :1770][INFO    ][3038] Running state [UTC] at time 18:54:31.174429
2018-10-16 18:54:31,175 [salt.state       :1803][INFO    ][3038] Executing state timezone.system for [UTC]
2018-10-16 18:54:31,181 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['timedatectl'] in directory '/root'
2018-10-16 18:54:31,292 [salt.state       :290 ][INFO    ][3038] Timezone UTC already set, UTC already set to UTC
2018-10-16 18:54:31,294 [salt.state       :1941][INFO    ][3038] Completed state [UTC] at time 18:54:31.294316 duration_in_ms=119.887
2018-10-16 18:54:31,301 [salt.state       :1770][INFO    ][3038] Running state [/etc/default/grub.d] at time 18:54:31.301547
2018-10-16 18:54:31,302 [salt.state       :1803][INFO    ][3038] Executing state file.directory for [/etc/default/grub.d]
2018-10-16 18:54:31,310 [salt.state       :290 ][INFO    ][3038] Directory /etc/default/grub.d is in the correct state
Directory /etc/default/grub.d updated
2018-10-16 18:54:31,311 [salt.state       :1941][INFO    ][3038] Completed state [/etc/default/grub.d] at time 18:54:31.311879 duration_in_ms=10.332
2018-10-16 18:54:31,317 [salt.state       :1770][INFO    ][3038] Running state [/etc/default/grub.d/99-custom-settings.cfg] at time 18:54:31.316969
2018-10-16 18:54:31,317 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/default/grub.d/99-custom-settings.cfg]
2018-10-16 18:54:31,375 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:31,376 [salt.state       :1941][INFO    ][3038] Completed state [/etc/default/grub.d/99-custom-settings.cfg] at time 18:54:31.375960 duration_in_ms=58.991
2018-10-16 18:54:31,377 [salt.state       :1770][INFO    ][3038] Running state [update-grub] at time 18:54:31.377103
2018-10-16 18:54:31,377 [salt.state       :1803][INFO    ][3038] Executing state cmd.wait for [update-grub]
2018-10-16 18:54:31,378 [salt.state       :290 ][INFO    ][3038] No changes made for update-grub
2018-10-16 18:54:31,379 [salt.state       :1941][INFO    ][3038] Completed state [update-grub] at time 18:54:31.379667 duration_in_ms=2.564
2018-10-16 18:54:31,380 [salt.state       :1770][INFO    ][3038] Running state [update-grub] at time 18:54:31.380936
2018-10-16 18:54:31,381 [salt.state       :1803][INFO    ][3038] Executing state cmd.mod_watch for [update-grub]
2018-10-16 18:54:31,383 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'update-grub' in directory '/root'
2018-10-16 18:54:32,152 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185431190669
2018-10-16 18:54:32,179 [salt.minion      :1431][INFO    ][4077] Starting a new job with PID 4077
2018-10-16 18:54:32,208 [salt.minion      :1708][INFO    ][4077] Returning information for job: 20181016185431190669
2018-10-16 18:54:32,747 [salt.state       :290 ][INFO    ][3038] {'pid': 3901, 'retcode': 0, 'stderr': 'Generating grub configuration file ...\nFound linux image: /boot/vmlinuz-4.15.0-36-generic\nFound initrd image: /boot/initrd.img-4.15.0-36-generic\nFound linux image: /boot/vmlinuz-4.4.0-137-generic\nFound initrd image: /boot/initrd.img-4.4.0-137-generic\ndone', 'stdout': ''}
2018-10-16 18:54:32,748 [salt.state       :1941][INFO    ][3038] Completed state [update-grub] at time 18:54:32.748789 duration_in_ms=1367.852
2018-10-16 18:54:32,753 [salt.state       :1770][INFO    ][3038] Running state [nf_conntrack] at time 18:54:32.753611
2018-10-16 18:54:32,754 [salt.state       :1803][INFO    ][3038] Executing state kmod.present for [nf_conntrack]
2018-10-16 18:54:32,756 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'lsmod' in directory '/root'
2018-10-16 18:54:33,350 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'lsmod' in directory '/root'
2018-10-16 18:54:33,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'modprobe nf_conntrack' in directory '/root'
2018-10-16 18:54:33,425 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'lsmod' in directory '/root'
2018-10-16 18:54:33,588 [salt.state       :290 ][INFO    ][3038] {'nf_conntrack': 'loaded'}
2018-10-16 18:54:33,588 [salt.state       :1941][INFO    ][3038] Completed state [nf_conntrack] at time 18:54:33.588800 duration_in_ms=835.189
2018-10-16 18:54:33,594 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_keepalive_probes] at time 18:54:33.593955
2018-10-16 18:54:33,594 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_keepalive_probes]
2018-10-16 18:54:33,596 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_keepalive_probes="8"' in directory '/root'
2018-10-16 18:54:33,643 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_keepalive_probes': 8}
2018-10-16 18:54:33,643 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_keepalive_probes] at time 18:54:33.643462 duration_in_ms=49.507
2018-10-16 18:54:33,644 [salt.state       :1770][INFO    ][3038] Running state [fs.file-max] at time 18:54:33.643927
2018-10-16 18:54:33,644 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [fs.file-max]
2018-10-16 18:54:33,646 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w fs.file-max="124165"' in directory '/root'
2018-10-16 18:54:33,665 [salt.state       :290 ][INFO    ][3038] {'fs.file-max': 124165}
2018-10-16 18:54:33,666 [salt.state       :1941][INFO    ][3038] Completed state [fs.file-max] at time 18:54:33.666043 duration_in_ms=22.115
2018-10-16 18:54:33,667 [salt.state       :1770][INFO    ][3038] Running state [net.core.somaxconn] at time 18:54:33.667326
2018-10-16 18:54:33,667 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.core.somaxconn]
2018-10-16 18:54:33,740 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.core.somaxconn="4096"' in directory '/root'
2018-10-16 18:54:33,761 [salt.state       :290 ][INFO    ][3038] {'net.core.somaxconn': 4096}
2018-10-16 18:54:33,762 [salt.state       :1941][INFO    ][3038] Completed state [net.core.somaxconn] at time 18:54:33.762767 duration_in_ms=95.44
2018-10-16 18:54:33,763 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_max_syn_backlog] at time 18:54:33.763242
2018-10-16 18:54:33,763 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_max_syn_backlog]
2018-10-16 18:54:33,766 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_max_syn_backlog="8192"' in directory '/root'
2018-10-16 18:54:33,786 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_max_syn_backlog': 8192}
2018-10-16 18:54:33,787 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_max_syn_backlog] at time 18:54:33.787540 duration_in_ms=24.298
2018-10-16 18:54:33,789 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_tw_reuse] at time 18:54:33.789151
2018-10-16 18:54:33,789 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_tw_reuse]
2018-10-16 18:54:33,848 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_tw_reuse="1"' in directory '/root'
2018-10-16 18:54:33,871 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_tw_reuse': 1}
2018-10-16 18:54:33,872 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_tw_reuse] at time 18:54:33.872676 duration_in_ms=83.524
2018-10-16 18:54:33,873 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_congestion_control] at time 18:54:33.873132
2018-10-16 18:54:33,873 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_congestion_control]
2018-10-16 18:54:33,877 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_congestion_control="yeah"' in directory '/root'
2018-10-16 18:54:34,017 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_congestion_control': 'yeah'}
2018-10-16 18:54:34,019 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_congestion_control] at time 18:54:34.019087 duration_in_ms=145.954
2018-10-16 18:54:34,020 [salt.state       :1770][INFO    ][3038] Running state [net.nf_conntrack_max] at time 18:54:34.020635
2018-10-16 18:54:34,021 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.nf_conntrack_max]
2018-10-16 18:54:34,024 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.nf_conntrack_max="1048576"' in directory '/root'
2018-10-16 18:54:34,049 [salt.state       :290 ][INFO    ][3038] {'net.nf_conntrack_max': 1048576}
2018-10-16 18:54:34,050 [salt.state       :1941][INFO    ][3038] Completed state [net.nf_conntrack_max] at time 18:54:34.049991 duration_in_ms=29.355
2018-10-16 18:54:34,051 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_retries2] at time 18:54:34.051313
2018-10-16 18:54:34,051 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_retries2]
2018-10-16 18:54:34,055 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_retries2="5"' in directory '/root'
2018-10-16 18:54:34,077 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_retries2': 5}
2018-10-16 18:54:34,077 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_retries2] at time 18:54:34.077561 duration_in_ms=26.248
2018-10-16 18:54:34,078 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_fin_timeout] at time 18:54:34.077989
2018-10-16 18:54:34,078 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_fin_timeout]
2018-10-16 18:54:34,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_fin_timeout="30"' in directory '/root'
2018-10-16 18:54:34,100 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_fin_timeout': 30}
2018-10-16 18:54:34,100 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_fin_timeout] at time 18:54:34.100831 duration_in_ms=22.841
2018-10-16 18:54:34,101 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_slow_start_after_idle] at time 18:54:34.101273
2018-10-16 18:54:34,101 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_slow_start_after_idle]
2018-10-16 18:54:34,103 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_slow_start_after_idle="0"' in directory '/root'
2018-10-16 18:54:34,121 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_slow_start_after_idle': 0}
2018-10-16 18:54:34,122 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_slow_start_after_idle] at time 18:54:34.122332 duration_in_ms=21.058
2018-10-16 18:54:34,123 [salt.state       :1770][INFO    ][3038] Running state [vm.swappiness] at time 18:54:34.123373
2018-10-16 18:54:34,123 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [vm.swappiness]
2018-10-16 18:54:34,125 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w vm.swappiness="10"' in directory '/root'
2018-10-16 18:54:34,143 [salt.state       :290 ][INFO    ][3038] {'vm.swappiness': 10}
2018-10-16 18:54:34,143 [salt.state       :1941][INFO    ][3038] Completed state [vm.swappiness] at time 18:54:34.143883 duration_in_ms=20.51
2018-10-16 18:54:34,144 [salt.state       :1770][INFO    ][3038] Running state [net.core.netdev_max_backlog] at time 18:54:34.144653
2018-10-16 18:54:34,145 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.core.netdev_max_backlog]
2018-10-16 18:54:34,146 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.core.netdev_max_backlog="261144"' in directory '/root'
2018-10-16 18:54:34,163 [salt.state       :290 ][INFO    ][3038] {'net.core.netdev_max_backlog': 261144}
2018-10-16 18:54:34,165 [salt.state       :1941][INFO    ][3038] Completed state [net.core.netdev_max_backlog] at time 18:54:34.165013 duration_in_ms=20.359
2018-10-16 18:54:34,165 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.neigh.default.gc_thresh1] at time 18:54:34.165439
2018-10-16 18:54:34,165 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh1]
2018-10-16 18:54:34,167 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh1="4096"' in directory '/root'
2018-10-16 18:54:34,185 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.neigh.default.gc_thresh1': 4096}
2018-10-16 18:54:34,185 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.neigh.default.gc_thresh1] at time 18:54:34.185416 duration_in_ms=19.977
2018-10-16 18:54:34,200 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.neigh.default.gc_thresh2] at time 18:54:34.200203
2018-10-16 18:54:34,200 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh2]
2018-10-16 18:54:34,202 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh2="8192"' in directory '/root'
2018-10-16 18:54:34,221 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.neigh.default.gc_thresh2': 8192}
2018-10-16 18:54:34,221 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.neigh.default.gc_thresh2] at time 18:54:34.221801 duration_in_ms=21.598
2018-10-16 18:54:34,222 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.neigh.default.gc_thresh3] at time 18:54:34.222232
2018-10-16 18:54:34,222 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.neigh.default.gc_thresh3]
2018-10-16 18:54:34,223 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.neigh.default.gc_thresh3="16384"' in directory '/root'
2018-10-16 18:54:34,240 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.neigh.default.gc_thresh3': 16384}
2018-10-16 18:54:34,241 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.neigh.default.gc_thresh3] at time 18:54:34.241091 duration_in_ms=18.858
2018-10-16 18:54:34,241 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_keepalive_intvl] at time 18:54:34.241518
2018-10-16 18:54:34,241 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_keepalive_intvl]
2018-10-16 18:54:34,246 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_keepalive_intvl="3"' in directory '/root'
2018-10-16 18:54:34,263 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_keepalive_intvl': 3}
2018-10-16 18:54:34,264 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_keepalive_intvl] at time 18:54:34.264619 duration_in_ms=23.101
2018-10-16 18:54:34,265 [salt.state       :1770][INFO    ][3038] Running state [net.ipv4.tcp_keepalive_time] at time 18:54:34.265058
2018-10-16 18:54:34,265 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [net.ipv4.tcp_keepalive_time]
2018-10-16 18:54:34,267 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w net.ipv4.tcp_keepalive_time="30"' in directory '/root'
2018-10-16 18:54:34,283 [salt.state       :290 ][INFO    ][3038] {'net.ipv4.tcp_keepalive_time': 30}
2018-10-16 18:54:34,284 [salt.state       :1941][INFO    ][3038] Completed state [net.ipv4.tcp_keepalive_time] at time 18:54:34.284519 duration_in_ms=19.461
2018-10-16 18:54:34,285 [salt.state       :1770][INFO    ][3038] Running state [kernel.panic] at time 18:54:34.284970
2018-10-16 18:54:34,285 [salt.state       :1803][INFO    ][3038] Executing state sysctl.present for [kernel.panic]
2018-10-16 18:54:34,288 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'sysctl -w kernel.panic="60"' in directory '/root'
2018-10-16 18:54:34,305 [salt.state       :290 ][INFO    ][3038] {'kernel.panic': 60}
2018-10-16 18:54:34,307 [salt.state       :1941][INFO    ][3038] Completed state [kernel.panic] at time 18:54:34.306346 duration_in_ms=21.376
2018-10-16 18:54:34,320 [salt.state       :1770][INFO    ][3038] Running state [linux_sysfs_package] at time 18:54:34.320223
2018-10-16 18:54:34,320 [salt.state       :1803][INFO    ][3038] Executing state pkg.installed for [linux_sysfs_package]
2018-10-16 18:54:35,229 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['apt-cache', '-q', 'policy', 'sysfsutils'] in directory '/root'
2018-10-16 18:54:35,386 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 18:54:37,849 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 18:54:37,878 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'sysfsutils'] in directory '/root'
2018-10-16 18:54:41,279 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185441268854
2018-10-16 18:54:41,304 [salt.minion      :1431][INFO    ][5105] Starting a new job with PID 5105
2018-10-16 18:54:41,326 [salt.minion      :1708][INFO    ][5105] Returning information for job: 20181016185441268854
2018-10-16 18:54:42,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:54:42,768 [salt.state       :290 ][INFO    ][3038] Made the following changes:
'libsysfs2' changed from 'absent' to '2.1.0+repack-4'
'sysfsutils' changed from 'absent' to '2.1.0+repack-4'

2018-10-16 18:54:42,794 [salt.state       :905 ][INFO    ][3038] Loading fresh modules for state activity
2018-10-16 18:54:42,852 [salt.state       :1941][INFO    ][3038] Completed state [linux_sysfs_package] at time 18:54:42.852838 duration_in_ms=8532.913
2018-10-16 18:54:42,860 [salt.state       :1770][INFO    ][3038] Running state [/etc/sysfs.d] at time 18:54:42.860691
2018-10-16 18:54:42,861 [salt.state       :1803][INFO    ][3038] Executing state file.directory for [/etc/sysfs.d]
2018-10-16 18:54:42,867 [salt.state       :290 ][INFO    ][3038] Directory /etc/sysfs.d is in the correct state
Directory /etc/sysfs.d updated
2018-10-16 18:54:42,867 [salt.state       :1941][INFO    ][3038] Completed state [/etc/sysfs.d] at time 18:54:42.867830 duration_in_ms=7.139
2018-10-16 18:54:43,569 [salt.state       :1770][INFO    ][3038] Running state [ondemand] at time 18:54:43.569183
2018-10-16 18:54:43,571 [salt.state       :1803][INFO    ][3038] Executing state service.dead for [ondemand]
2018-10-16 18:54:43,573 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'status', 'ondemand.service', '-n', '0'] in directory '/root'
2018-10-16 18:54:43,599 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-16 18:54:43,628 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 18:54:43,663 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemd-run', '--scope', 'systemctl', 'stop', 'ondemand.service'] in directory '/root'
2018-10-16 18:54:43,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-active', 'ondemand.service'] in directory '/root'
2018-10-16 18:54:43,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 18:54:43,820 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 18:54:43,846 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemd-run', '--scope', '/usr/sbin/update-rc.d', '-f', 'ondemand', 'remove'] in directory '/root'
2018-10-16 18:54:44,036 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-enabled', 'ondemand.service'] in directory '/root'
2018-10-16 18:54:44,074 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'runlevel' in directory '/root'
2018-10-16 18:54:44,102 [salt.state       :290 ][INFO    ][3038] {'ondemand': True}
2018-10-16 18:54:44,103 [salt.state       :1941][INFO    ][3038] Completed state [ondemand] at time 18:54:44.103803 duration_in_ms=534.62
2018-10-16 18:54:44,105 [salt.state       :1770][INFO    ][3038] Running state [en_US.UTF-8] at time 18:54:44.105827
2018-10-16 18:54:44,106 [salt.state       :1803][INFO    ][3038] Executing state locale.present for [en_US.UTF-8]
2018-10-16 18:54:44,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'locale -a' in directory '/root'
2018-10-16 18:54:44,131 [salt.state       :290 ][INFO    ][3038] Locale en_US.UTF-8 is already present
2018-10-16 18:54:44,132 [salt.state       :1941][INFO    ][3038] Completed state [en_US.UTF-8] at time 18:54:44.132899 duration_in_ms=27.071
2018-10-16 18:54:44,136 [salt.state       :1770][INFO    ][3038] Running state [en_US.UTF-8] at time 18:54:44.136552
2018-10-16 18:54:44,137 [salt.state       :1803][INFO    ][3038] Executing state locale.system for [en_US.UTF-8]
2018-10-16 18:54:44,139 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'localectl' in directory '/root'
2018-10-16 18:54:44,210 [salt.state       :290 ][INFO    ][3038] System locale en_US.UTF-8 already set
2018-10-16 18:54:44,211 [salt.state       :1941][INFO    ][3038] Completed state [en_US.UTF-8] at time 18:54:44.211502 duration_in_ms=74.949
2018-10-16 18:54:44,213 [salt.state       :1770][INFO    ][3038] Running state [root] at time 18:54:44.213094
2018-10-16 18:54:44,213 [salt.state       :1803][INFO    ][3038] Executing state group.present for [root]
2018-10-16 18:54:44,215 [salt.state       :290 ][INFO    ][3038] Group root is present and up to date
2018-10-16 18:54:44,218 [salt.state       :1941][INFO    ][3038] Completed state [root] at time 18:54:44.217979 duration_in_ms=4.885
2018-10-16 18:54:44,222 [salt.state       :1770][INFO    ][3038] Running state [root] at time 18:54:44.222333
2018-10-16 18:54:44,223 [salt.state       :1803][INFO    ][3038] Executing state user.present for [root]
2018-10-16 18:54:44,232 [salt.state       :290 ][INFO    ][3038] User root is present and up to date
2018-10-16 18:54:44,232 [salt.state       :1941][INFO    ][3038] Completed state [root] at time 18:54:44.232911 duration_in_ms=10.577
2018-10-16 18:54:44,235 [salt.state       :1770][INFO    ][3038] Running state [/root] at time 18:54:44.235406
2018-10-16 18:54:44,235 [salt.state       :1803][INFO    ][3038] Executing state file.directory for [/root]
2018-10-16 18:54:44,237 [salt.state       :290 ][INFO    ][3038] Directory /root is in the correct state
Directory /root updated
2018-10-16 18:54:44,237 [salt.state       :1941][INFO    ][3038] Completed state [/root] at time 18:54:44.237790 duration_in_ms=2.384
2018-10-16 18:54:44,238 [salt.state       :1770][INFO    ][3038] Running state [/etc/sudoers.d/90-salt-user-root] at time 18:54:44.238033
2018-10-16 18:54:44,238 [salt.state       :1803][INFO    ][3038] Executing state file.absent for [/etc/sudoers.d/90-salt-user-root]
2018-10-16 18:54:44,239 [salt.state       :290 ][INFO    ][3038] File /etc/sudoers.d/90-salt-user-root is not present
2018-10-16 18:54:44,239 [salt.state       :1941][INFO    ][3038] Completed state [/etc/sudoers.d/90-salt-user-root] at time 18:54:44.239218 duration_in_ms=1.185
2018-10-16 18:54:44,239 [salt.state       :1770][INFO    ][3038] Running state [ubuntu] at time 18:54:44.239506
2018-10-16 18:54:44,240 [salt.state       :1803][INFO    ][3038] Executing state group.present for [ubuntu]
2018-10-16 18:54:44,240 [salt.state       :290 ][INFO    ][3038] Group ubuntu is present and up to date
2018-10-16 18:54:44,240 [salt.state       :1941][INFO    ][3038] Completed state [ubuntu] at time 18:54:44.240700 duration_in_ms=1.194
2018-10-16 18:54:44,242 [salt.state       :1770][INFO    ][3038] Running state [ubuntu] at time 18:54:44.242301
2018-10-16 18:54:44,242 [salt.state       :1803][INFO    ][3038] Executing state user.present for [ubuntu]
2018-10-16 18:54:44,249 [salt.state       :290 ][INFO    ][3038] {'passwd': 'XXX-REDACTED-XXX'}
2018-10-16 18:54:44,249 [salt.state       :1941][INFO    ][3038] Completed state [ubuntu] at time 18:54:44.249636 duration_in_ms=7.335
2018-10-16 18:54:44,250 [salt.state       :1770][INFO    ][3038] Running state [/home/ubuntu] at time 18:54:44.250801
2018-10-16 18:54:44,251 [salt.state       :1803][INFO    ][3038] Executing state file.directory for [/home/ubuntu]
2018-10-16 18:54:44,253 [salt.state       :290 ][INFO    ][3038] {'mode': '0700'}
2018-10-16 18:54:44,253 [salt.state       :1941][INFO    ][3038] Completed state [/home/ubuntu] at time 18:54:44.253230 duration_in_ms=2.429
2018-10-16 18:54:44,254 [salt.state       :1770][INFO    ][3038] Running state [/etc/sudoers.d/90-salt-user-ubuntu] at time 18:54:44.254830
2018-10-16 18:54:44,255 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/sudoers.d/90-salt-user-ubuntu]
2018-10-16 18:54:44,278 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/files/sudoer'
2018-10-16 18:54:44,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command '/usr/sbin/visudo -c -f /tmp/__salt.tmp.O9zvNE' in directory '/root'
2018-10-16 18:54:44,327 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:44,328 [salt.state       :1941][INFO    ][3038] Completed state [/etc/sudoers.d/90-salt-user-ubuntu] at time 18:54:44.328369 duration_in_ms=73.539
2018-10-16 18:54:44,328 [salt.state       :1770][INFO    ][3038] Running state [/etc/security/limits.d/90-salt-default.conf] at time 18:54:44.328781
2018-10-16 18:54:44,329 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/security/limits.d/90-salt-default.conf]
2018-10-16 18:54:44,358 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/files/limits.conf'
2018-10-16 18:54:44,481 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:44,481 [salt.state       :1941][INFO    ][3038] Completed state [/etc/security/limits.d/90-salt-default.conf] at time 18:54:44.481857 duration_in_ms=153.076
2018-10-16 18:54:44,482 [salt.state       :1770][INFO    ][3038] Running state [/etc/systemd/system.conf.d/90-salt.conf] at time 18:54:44.482440
2018-10-16 18:54:44,483 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/systemd/system.conf.d/90-salt.conf]
2018-10-16 18:54:44,503 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/files/systemd.conf'
2018-10-16 18:54:44,617 [salt.state       :290 ][INFO    ][3038] File changed:
New file
2018-10-16 18:54:44,617 [salt.state       :1941][INFO    ][3038] Completed state [/etc/systemd/system.conf.d/90-salt.conf] at time 18:54:44.617707 duration_in_ms=135.267
2018-10-16 18:54:44,621 [salt.state       :1770][INFO    ][3038] Running state [service.systemctl_reload] at time 18:54:44.621356
2018-10-16 18:54:44,621 [salt.state       :1803][INFO    ][3038] Executing state module.wait for [service.systemctl_reload]
2018-10-16 18:54:44,621 [salt.state       :290 ][INFO    ][3038] No changes made for service.systemctl_reload
2018-10-16 18:54:44,622 [salt.state       :1941][INFO    ][3038] Completed state [service.systemctl_reload] at time 18:54:44.622163 duration_in_ms=0.807
2018-10-16 18:54:44,622 [salt.state       :1770][INFO    ][3038] Running state [service.systemctl_reload] at time 18:54:44.622659
2018-10-16 18:54:44,623 [salt.state       :1803][INFO    ][3038] Executing state module.mod_watch for [service.systemctl_reload]
2018-10-16 18:54:44,623 [salt.utils.decorators:613 ][WARNING ][3038] The function "module.run" is using its deprecated version and will expire in version "Sodium".
2018-10-16 18:54:44,624 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', '--system', 'daemon-reload'] in directory '/root'
2018-10-16 18:54:44,771 [salt.state       :290 ][INFO    ][3038] {'ret': True}
2018-10-16 18:54:44,773 [salt.state       :1941][INFO    ][3038] Completed state [service.systemctl_reload] at time 18:54:44.772917 duration_in_ms=150.257
2018-10-16 18:54:44,773 [salt.state       :1770][INFO    ][3038] Running state [/etc/issue] at time 18:54:44.773446
2018-10-16 18:54:44,773 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/issue]
2018-10-16 18:54:44,778 [salt.state       :290 ][INFO    ][3038] File changed:
--- 
+++ 
@@ -1,2 +1,9 @@
-Ubuntu 16.04.5 LTS \n \l
-
+=================================== WARNING ====================================
+You have accessed a computer managed by OPNFV.
+You are required to have authorization from OPNFV
+before you proceed and you are strictly limited to use set out within that
+authorization. Unauthorized access to or misuse of this system is prohibited
+and constitutes an offence under the Computer Misuse Act 1990.
+If you disclose any information obtained through this system without authority
+OPNFV may take legal action against you.
+================================================================================

2018-10-16 18:54:44,778 [salt.state       :1941][INFO    ][3038] Completed state [/etc/issue] at time 18:54:44.778788 duration_in_ms=5.341
2018-10-16 18:54:44,779 [salt.state       :1770][INFO    ][3038] Running state [/etc/hostname] at time 18:54:44.779067
2018-10-16 18:54:44,779 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/hostname]
2018-10-16 18:54:46,282 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'linux/files/hostname'
2018-10-16 18:54:46,297 [salt.state       :290 ][INFO    ][3038] File changed:
--- 
+++ 
@@ -1 +1 @@
-ubuntu
+mdb01

2018-10-16 18:54:46,297 [salt.state       :1941][INFO    ][3038] Completed state [/etc/hostname] at time 18:54:46.297557 duration_in_ms=1518.49
2018-10-16 18:54:46,301 [salt.state       :1770][INFO    ][3038] Running state [hostname mdb01] at time 18:54:46.301108
2018-10-16 18:54:46,301 [salt.state       :1803][INFO    ][3038] Executing state cmd.run for [hostname mdb01]
2018-10-16 18:54:46,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'test "$(hostname)" = "mdb01"' in directory '/root'
2018-10-16 18:54:46,318 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command 'hostname mdb01' in directory '/root'
2018-10-16 18:54:46,332 [salt.state       :290 ][INFO    ][3038] {'pid': 5324, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-16 18:54:46,333 [salt.state       :1941][INFO    ][3038] Completed state [hostname mdb01] at time 18:54:46.333467 duration_in_ms=32.359
2018-10-16 18:54:46,335 [salt.state       :1770][INFO    ][3038] Running state [mdb02] at time 18:54:46.335397
2018-10-16 18:54:46,335 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb02]
2018-10-16 18:54:46,337 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb02'}
2018-10-16 18:54:46,337 [salt.state       :1941][INFO    ][3038] Completed state [mdb02] at time 18:54:46.337519 duration_in_ms=2.122
2018-10-16 18:54:46,337 [salt.state       :1770][INFO    ][3038] Running state [mdb02.mcp-ovs-ha.local] at time 18:54:46.337848
2018-10-16 18:54:46,338 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb02.mcp-ovs-ha.local]
2018-10-16 18:54:46,339 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb02.mcp-ovs-ha.local'}
2018-10-16 18:54:46,339 [salt.state       :1941][INFO    ][3038] Completed state [mdb02.mcp-ovs-ha.local] at time 18:54:46.339595 duration_in_ms=1.747
2018-10-16 18:54:46,339 [salt.state       :1770][INFO    ][3038] Running state [mdb03] at time 18:54:46.339919
2018-10-16 18:54:46,340 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb03]
2018-10-16 18:54:46,341 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb03'}
2018-10-16 18:54:46,341 [salt.state       :1941][INFO    ][3038] Completed state [mdb03] at time 18:54:46.341901 duration_in_ms=1.982
2018-10-16 18:54:46,342 [salt.state       :1770][INFO    ][3038] Running state [mdb03.mcp-ovs-ha.local] at time 18:54:46.342237
2018-10-16 18:54:46,342 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb03.mcp-ovs-ha.local]
2018-10-16 18:54:46,343 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb03.mcp-ovs-ha.local'}
2018-10-16 18:54:46,344 [salt.state       :1941][INFO    ][3038] Completed state [mdb03.mcp-ovs-ha.local] at time 18:54:46.343898 duration_in_ms=1.66
2018-10-16 18:54:46,344 [salt.state       :1770][INFO    ][3038] Running state [mdb01] at time 18:54:46.344770
2018-10-16 18:54:46,345 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb01]
2018-10-16 18:54:46,345 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb01'}
2018-10-16 18:54:46,347 [salt.state       :1941][INFO    ][3038] Completed state [mdb01] at time 18:54:46.347016 duration_in_ms=2.246
2018-10-16 18:54:46,347 [salt.state       :1770][INFO    ][3038] Running state [mdb01.mcp-ovs-ha.local] at time 18:54:46.347325
2018-10-16 18:54:46,347 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb01.mcp-ovs-ha.local]
2018-10-16 18:54:46,348 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,348 [salt.state       :1941][INFO    ][3038] Completed state [mdb01.mcp-ovs-ha.local] at time 18:54:46.348724 duration_in_ms=1.399
2018-10-16 18:54:46,349 [salt.state       :1770][INFO    ][3038] Running state [mdb] at time 18:54:46.349037
2018-10-16 18:54:46,349 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb]
2018-10-16 18:54:46,352 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb'}
2018-10-16 18:54:46,352 [salt.state       :1941][INFO    ][3038] Completed state [mdb] at time 18:54:46.352225 duration_in_ms=3.188
2018-10-16 18:54:46,352 [salt.state       :1770][INFO    ][3038] Running state [mdb.mcp-ovs-ha.local] at time 18:54:46.352544
2018-10-16 18:54:46,352 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mdb.mcp-ovs-ha.local]
2018-10-16 18:54:46,354 [salt.state       :290 ][INFO    ][3038] {'host': 'mdb.mcp-ovs-ha.local'}
2018-10-16 18:54:46,354 [salt.state       :1941][INFO    ][3038] Completed state [mdb.mcp-ovs-ha.local] at time 18:54:46.354258 duration_in_ms=1.714
2018-10-16 18:54:46,354 [salt.state       :1770][INFO    ][3038] Running state [cfg01] at time 18:54:46.354574
2018-10-16 18:54:46,354 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cfg01]
2018-10-16 18:54:46,356 [salt.state       :290 ][INFO    ][3038] {'host': 'cfg01'}
2018-10-16 18:54:46,356 [salt.state       :1941][INFO    ][3038] Completed state [cfg01] at time 18:54:46.356526 duration_in_ms=1.952
2018-10-16 18:54:46,356 [salt.state       :1770][INFO    ][3038] Running state [cfg01.mcp-ovs-ha.local] at time 18:54:46.356841
2018-10-16 18:54:46,357 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-16 18:54:46,358 [salt.state       :290 ][INFO    ][3038] {'host': 'cfg01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,358 [salt.state       :1941][INFO    ][3038] Completed state [cfg01.mcp-ovs-ha.local] at time 18:54:46.358575 duration_in_ms=1.734
2018-10-16 18:54:46,358 [salt.state       :1770][INFO    ][3038] Running state [prx01] at time 18:54:46.358890
2018-10-16 18:54:46,359 [salt.state       :1803][INFO    ][3038] Executing state host.present for [prx01]
2018-10-16 18:54:46,360 [salt.state       :290 ][INFO    ][3038] {'host': 'prx01'}
2018-10-16 18:54:46,360 [salt.state       :1941][INFO    ][3038] Completed state [prx01] at time 18:54:46.360311 duration_in_ms=1.421
2018-10-16 18:54:46,360 [salt.state       :1770][INFO    ][3038] Running state [prx01.mcp-ovs-ha.local] at time 18:54:46.360616
2018-10-16 18:54:46,360 [salt.state       :1803][INFO    ][3038] Executing state host.present for [prx01.mcp-ovs-ha.local]
2018-10-16 18:54:46,362 [salt.state       :290 ][INFO    ][3038] {'host': 'prx01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,362 [salt.state       :1941][INFO    ][3038] Completed state [prx01.mcp-ovs-ha.local] at time 18:54:46.362320 duration_in_ms=1.704
2018-10-16 18:54:46,362 [salt.state       :1770][INFO    ][3038] Running state [kvm01] at time 18:54:46.362628
2018-10-16 18:54:46,362 [salt.state       :1803][INFO    ][3038] Executing state host.present for [kvm01]
2018-10-16 18:54:46,363 [salt.state       :290 ][INFO    ][3038] {'host': 'kvm01'}
2018-10-16 18:54:46,364 [salt.state       :1941][INFO    ][3038] Completed state [kvm01] at time 18:54:46.364040 duration_in_ms=1.412
2018-10-16 18:54:46,364 [salt.state       :1770][INFO    ][3038] Running state [kvm01.mcp-ovs-ha.local] at time 18:54:46.364368
2018-10-16 18:54:46,364 [salt.state       :1803][INFO    ][3038] Executing state host.present for [kvm01.mcp-ovs-ha.local]
2018-10-16 18:54:46,365 [salt.state       :290 ][INFO    ][3038] {'host': 'kvm01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,365 [salt.state       :1941][INFO    ][3038] Completed state [kvm01.mcp-ovs-ha.local] at time 18:54:46.365778 duration_in_ms=1.41
2018-10-16 18:54:46,366 [salt.state       :1770][INFO    ][3038] Running state [kvm03] at time 18:54:46.366144
2018-10-16 18:54:46,366 [salt.state       :1803][INFO    ][3038] Executing state host.present for [kvm03]
2018-10-16 18:54:46,367 [salt.state       :290 ][INFO    ][3038] {'host': 'kvm03'}
2018-10-16 18:54:46,367 [salt.state       :1941][INFO    ][3038] Completed state [kvm03] at time 18:54:46.367559 duration_in_ms=1.416
2018-10-16 18:54:46,367 [salt.state       :1770][INFO    ][3038] Running state [kvm03.mcp-ovs-ha.local] at time 18:54:46.367869
2018-10-16 18:54:46,368 [salt.state       :1803][INFO    ][3038] Executing state host.present for [kvm03.mcp-ovs-ha.local]
2018-10-16 18:54:46,369 [salt.state       :290 ][INFO    ][3038] {'host': 'kvm03.mcp-ovs-ha.local'}
2018-10-16 18:54:46,369 [salt.state       :1941][INFO    ][3038] Completed state [kvm03.mcp-ovs-ha.local] at time 18:54:46.369596 duration_in_ms=1.727
2018-10-16 18:54:46,369 [salt.state       :1770][INFO    ][3038] Running state [kvm02] at time 18:54:46.369913
2018-10-16 18:54:46,370 [salt.state       :1803][INFO    ][3038] Executing state host.present for [kvm02]
2018-10-16 18:54:46,371 [salt.state       :290 ][INFO    ][3038] {'host': 'kvm02'}
2018-10-16 18:54:46,371 [salt.state       :1941][INFO    ][3038] Completed state [kvm02] at time 18:54:46.371950 duration_in_ms=2.037
2018-10-16 18:54:46,372 [salt.state       :1770][INFO    ][3038] Running state [kvm02.mcp-ovs-ha.local] at time 18:54:46.372286
2018-10-16 18:54:46,372 [salt.state       :1803][INFO    ][3038] Executing state host.present for [kvm02.mcp-ovs-ha.local]
2018-10-16 18:54:46,373 [salt.state       :290 ][INFO    ][3038] {'host': 'kvm02.mcp-ovs-ha.local'}
2018-10-16 18:54:46,373 [salt.state       :1941][INFO    ][3038] Completed state [kvm02.mcp-ovs-ha.local] at time 18:54:46.373741 duration_in_ms=1.455
2018-10-16 18:54:46,374 [salt.state       :1770][INFO    ][3038] Running state [dbs] at time 18:54:46.374089
2018-10-16 18:54:46,374 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs]
2018-10-16 18:54:46,375 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs'}
2018-10-16 18:54:46,375 [salt.state       :1941][INFO    ][3038] Completed state [dbs] at time 18:54:46.375549 duration_in_ms=1.461
2018-10-16 18:54:46,375 [salt.state       :1770][INFO    ][3038] Running state [dbs.mcp-ovs-ha.local] at time 18:54:46.375863
2018-10-16 18:54:46,376 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs.mcp-ovs-ha.local]
2018-10-16 18:54:46,377 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs.mcp-ovs-ha.local'}
2018-10-16 18:54:46,377 [salt.state       :1941][INFO    ][3038] Completed state [dbs.mcp-ovs-ha.local] at time 18:54:46.377653 duration_in_ms=1.79
2018-10-16 18:54:46,378 [salt.state       :1770][INFO    ][3038] Running state [prx] at time 18:54:46.377968
2018-10-16 18:54:46,378 [salt.state       :1803][INFO    ][3038] Executing state host.present for [prx]
2018-10-16 18:54:46,380 [salt.state       :290 ][INFO    ][3038] {'host': 'prx'}
2018-10-16 18:54:46,380 [salt.state       :1941][INFO    ][3038] Completed state [prx] at time 18:54:46.380608 duration_in_ms=2.64
2018-10-16 18:54:46,380 [salt.state       :1770][INFO    ][3038] Running state [prx.mcp-ovs-ha.local] at time 18:54:46.380935
2018-10-16 18:54:46,381 [salt.state       :1803][INFO    ][3038] Executing state host.present for [prx.mcp-ovs-ha.local]
2018-10-16 18:54:46,382 [salt.state       :290 ][INFO    ][3038] {'host': 'prx.mcp-ovs-ha.local'}
2018-10-16 18:54:46,382 [salt.state       :1941][INFO    ][3038] Completed state [prx.mcp-ovs-ha.local] at time 18:54:46.382867 duration_in_ms=1.932
2018-10-16 18:54:46,383 [salt.state       :1770][INFO    ][3038] Running state [prx02] at time 18:54:46.383189
2018-10-16 18:54:46,383 [salt.state       :1803][INFO    ][3038] Executing state host.present for [prx02]
2018-10-16 18:54:46,385 [salt.state       :290 ][INFO    ][3038] {'host': 'prx02'}
2018-10-16 18:54:46,385 [salt.state       :1941][INFO    ][3038] Completed state [prx02] at time 18:54:46.385264 duration_in_ms=2.075
2018-10-16 18:54:46,385 [salt.state       :1770][INFO    ][3038] Running state [prx02.mcp-ovs-ha.local] at time 18:54:46.385584
2018-10-16 18:54:46,385 [salt.state       :1803][INFO    ][3038] Executing state host.present for [prx02.mcp-ovs-ha.local]
2018-10-16 18:54:46,386 [salt.state       :290 ][INFO    ][3038] {'host': 'prx02.mcp-ovs-ha.local'}
2018-10-16 18:54:46,387 [salt.state       :1941][INFO    ][3038] Completed state [prx02.mcp-ovs-ha.local] at time 18:54:46.387117 duration_in_ms=1.533
2018-10-16 18:54:46,387 [salt.state       :1770][INFO    ][3038] Running state [msg02] at time 18:54:46.387445
2018-10-16 18:54:46,387 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg02]
2018-10-16 18:54:46,389 [salt.state       :290 ][INFO    ][3038] {'host': 'msg02'}
2018-10-16 18:54:46,389 [salt.state       :1941][INFO    ][3038] Completed state [msg02] at time 18:54:46.389242 duration_in_ms=1.797
2018-10-16 18:54:46,389 [salt.state       :1770][INFO    ][3038] Running state [msg02.mcp-ovs-ha.local] at time 18:54:46.389562
2018-10-16 18:54:46,389 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg02.mcp-ovs-ha.local]
2018-10-16 18:54:46,390 [salt.state       :290 ][INFO    ][3038] {'host': 'msg02.mcp-ovs-ha.local'}
2018-10-16 18:54:46,391 [salt.state       :1941][INFO    ][3038] Completed state [msg02.mcp-ovs-ha.local] at time 18:54:46.391111 duration_in_ms=1.549
2018-10-16 18:54:46,391 [salt.state       :1770][INFO    ][3038] Running state [msg03] at time 18:54:46.391435
2018-10-16 18:54:46,391 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg03]
2018-10-16 18:54:46,393 [salt.state       :290 ][INFO    ][3038] {'host': 'msg03'}
2018-10-16 18:54:46,393 [salt.state       :1941][INFO    ][3038] Completed state [msg03] at time 18:54:46.393241 duration_in_ms=1.806
2018-10-16 18:54:46,393 [salt.state       :1770][INFO    ][3038] Running state [msg03.mcp-ovs-ha.local] at time 18:54:46.393561
2018-10-16 18:54:46,393 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg03.mcp-ovs-ha.local]
2018-10-16 18:54:46,395 [salt.state       :290 ][INFO    ][3038] {'host': 'msg03.mcp-ovs-ha.local'}
2018-10-16 18:54:46,395 [salt.state       :1941][INFO    ][3038] Completed state [msg03.mcp-ovs-ha.local] at time 18:54:46.395703 duration_in_ms=2.142
2018-10-16 18:54:46,396 [salt.state       :1770][INFO    ][3038] Running state [msg01] at time 18:54:46.396028
2018-10-16 18:54:46,396 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg01]
2018-10-16 18:54:46,397 [salt.state       :290 ][INFO    ][3038] {'host': 'msg01'}
2018-10-16 18:54:46,397 [salt.state       :1941][INFO    ][3038] Completed state [msg01] at time 18:54:46.397566 duration_in_ms=1.538
2018-10-16 18:54:46,397 [salt.state       :1770][INFO    ][3038] Running state [msg01.mcp-ovs-ha.local] at time 18:54:46.397897
2018-10-16 18:54:46,398 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg01.mcp-ovs-ha.local]
2018-10-16 18:54:46,399 [salt.state       :290 ][INFO    ][3038] {'host': 'msg01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,399 [salt.state       :1941][INFO    ][3038] Completed state [msg01.mcp-ovs-ha.local] at time 18:54:46.399467 duration_in_ms=1.57
2018-10-16 18:54:46,399 [salt.state       :1770][INFO    ][3038] Running state [msg] at time 18:54:46.399798
2018-10-16 18:54:46,400 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg]
2018-10-16 18:54:46,401 [salt.state       :290 ][INFO    ][3038] {'host': 'msg'}
2018-10-16 18:54:46,401 [salt.state       :1941][INFO    ][3038] Completed state [msg] at time 18:54:46.401647 duration_in_ms=1.848
2018-10-16 18:54:46,402 [salt.state       :1770][INFO    ][3038] Running state [msg.mcp-ovs-ha.local] at time 18:54:46.401979
2018-10-16 18:54:46,402 [salt.state       :1803][INFO    ][3038] Executing state host.present for [msg.mcp-ovs-ha.local]
2018-10-16 18:54:46,403 [salt.state       :290 ][INFO    ][3038] {'host': 'msg.mcp-ovs-ha.local'}
2018-10-16 18:54:46,403 [salt.state       :1941][INFO    ][3038] Completed state [msg.mcp-ovs-ha.local] at time 18:54:46.403874 duration_in_ms=1.895
2018-10-16 18:54:46,404 [salt.state       :1770][INFO    ][3038] Running state [cfg01] at time 18:54:46.404230
2018-10-16 18:54:46,404 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cfg01]
2018-10-16 18:54:46,404 [salt.state       :290 ][INFO    ][3038] Host cfg01 (192.168.10.11) already present
2018-10-16 18:54:46,405 [salt.state       :1941][INFO    ][3038] Completed state [cfg01] at time 18:54:46.405151 duration_in_ms=0.921
2018-10-16 18:54:46,405 [salt.state       :1770][INFO    ][3038] Running state [cfg01.mcp-ovs-ha.local] at time 18:54:46.405477
2018-10-16 18:54:46,405 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cfg01.mcp-ovs-ha.local]
2018-10-16 18:54:46,406 [salt.state       :290 ][INFO    ][3038] Host cfg01.mcp-ovs-ha.local (192.168.10.11) already present
2018-10-16 18:54:46,406 [salt.state       :1941][INFO    ][3038] Completed state [cfg01.mcp-ovs-ha.local] at time 18:54:46.406430 duration_in_ms=0.953
2018-10-16 18:54:46,406 [salt.state       :1770][INFO    ][3038] Running state [cmp002] at time 18:54:46.406761
2018-10-16 18:54:46,407 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cmp002]
2018-10-16 18:54:46,411 [salt.state       :290 ][INFO    ][3038] {'host': 'cmp002'}
2018-10-16 18:54:46,411 [salt.state       :1941][INFO    ][3038] Completed state [cmp002] at time 18:54:46.411312 duration_in_ms=4.551
2018-10-16 18:54:46,411 [salt.state       :1770][INFO    ][3038] Running state [cmp002.mcp-ovs-ha.local] at time 18:54:46.411662
2018-10-16 18:54:46,411 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cmp002.mcp-ovs-ha.local]
2018-10-16 18:54:46,413 [salt.state       :290 ][INFO    ][3038] {'host': 'cmp002.mcp-ovs-ha.local'}
2018-10-16 18:54:46,413 [salt.state       :1941][INFO    ][3038] Completed state [cmp002.mcp-ovs-ha.local] at time 18:54:46.413562 duration_in_ms=1.9
2018-10-16 18:54:46,413 [salt.state       :1770][INFO    ][3038] Running state [cmp001] at time 18:54:46.413899
2018-10-16 18:54:46,414 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cmp001]
2018-10-16 18:54:46,415 [salt.state       :290 ][INFO    ][3038] {'host': 'cmp001'}
2018-10-16 18:54:46,415 [salt.state       :1941][INFO    ][3038] Completed state [cmp001] at time 18:54:46.415517 duration_in_ms=1.618
2018-10-16 18:54:46,415 [salt.state       :1770][INFO    ][3038] Running state [cmp001.mcp-ovs-ha.local] at time 18:54:46.415853
2018-10-16 18:54:46,416 [salt.state       :1803][INFO    ][3038] Executing state host.present for [cmp001.mcp-ovs-ha.local]
2018-10-16 18:54:46,417 [salt.state       :290 ][INFO    ][3038] {'host': 'cmp001.mcp-ovs-ha.local'}
2018-10-16 18:54:46,417 [salt.state       :1941][INFO    ][3038] Completed state [cmp001.mcp-ovs-ha.local] at time 18:54:46.417746 duration_in_ms=1.892
2018-10-16 18:54:46,418 [salt.state       :1770][INFO    ][3038] Running state [dbs01] at time 18:54:46.418438
2018-10-16 18:54:46,418 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs01]
2018-10-16 18:54:46,419 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs01'}
2018-10-16 18:54:46,420 [salt.state       :1941][INFO    ][3038] Completed state [dbs01] at time 18:54:46.420305 duration_in_ms=1.867
2018-10-16 18:54:46,420 [salt.state       :1770][INFO    ][3038] Running state [dbs01.mcp-ovs-ha.local] at time 18:54:46.420641
2018-10-16 18:54:46,420 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs01.mcp-ovs-ha.local]
2018-10-16 18:54:46,422 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,423 [salt.state       :1941][INFO    ][3038] Completed state [dbs01.mcp-ovs-ha.local] at time 18:54:46.423140 duration_in_ms=2.498
2018-10-16 18:54:46,423 [salt.state       :1770][INFO    ][3038] Running state [dbs02] at time 18:54:46.423483
2018-10-16 18:54:46,423 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs02]
2018-10-16 18:54:46,424 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs02'}
2018-10-16 18:54:46,425 [salt.state       :1941][INFO    ][3038] Completed state [dbs02] at time 18:54:46.425086 duration_in_ms=1.603
2018-10-16 18:54:46,425 [salt.state       :1770][INFO    ][3038] Running state [dbs02.mcp-ovs-ha.local] at time 18:54:46.425423
2018-10-16 18:54:46,425 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs02.mcp-ovs-ha.local]
2018-10-16 18:54:46,427 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs02.mcp-ovs-ha.local'}
2018-10-16 18:54:46,427 [salt.state       :1941][INFO    ][3038] Completed state [dbs02.mcp-ovs-ha.local] at time 18:54:46.427632 duration_in_ms=2.209
2018-10-16 18:54:46,428 [salt.state       :1770][INFO    ][3038] Running state [dbs03] at time 18:54:46.427978
2018-10-16 18:54:46,428 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs03]
2018-10-16 18:54:46,429 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs03'}
2018-10-16 18:54:46,429 [salt.state       :1941][INFO    ][3038] Completed state [dbs03] at time 18:54:46.429601 duration_in_ms=1.622
2018-10-16 18:54:46,429 [salt.state       :1770][INFO    ][3038] Running state [dbs03.mcp-ovs-ha.local] at time 18:54:46.429939
2018-10-16 18:54:46,430 [salt.state       :1803][INFO    ][3038] Executing state host.present for [dbs03.mcp-ovs-ha.local]
2018-10-16 18:54:46,432 [salt.state       :290 ][INFO    ][3038] {'host': 'dbs03.mcp-ovs-ha.local'}
2018-10-16 18:54:46,432 [salt.state       :1941][INFO    ][3038] Completed state [dbs03.mcp-ovs-ha.local] at time 18:54:46.432896 duration_in_ms=2.956
2018-10-16 18:54:46,433 [salt.state       :1770][INFO    ][3038] Running state [mas01] at time 18:54:46.433251
2018-10-16 18:54:46,433 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mas01]
2018-10-16 18:54:46,434 [salt.state       :290 ][INFO    ][3038] {'host': 'mas01'}
2018-10-16 18:54:46,434 [salt.state       :1941][INFO    ][3038] Completed state [mas01] at time 18:54:46.434906 duration_in_ms=1.655
2018-10-16 18:54:46,435 [salt.state       :1770][INFO    ][3038] Running state [mas01.mcp-ovs-ha.local] at time 18:54:46.435252
2018-10-16 18:54:46,436 [salt.state       :1803][INFO    ][3038] Executing state host.present for [mas01.mcp-ovs-ha.local]
2018-10-16 18:54:46,437 [salt.state       :290 ][INFO    ][3038] {'host': 'mas01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,437 [salt.state       :1941][INFO    ][3038] Completed state [mas01.mcp-ovs-ha.local] at time 18:54:46.437761 duration_in_ms=2.51
2018-10-16 18:54:46,438 [salt.state       :1770][INFO    ][3038] Running state [ctl02] at time 18:54:46.438160
2018-10-16 18:54:46,438 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl02]
2018-10-16 18:54:46,439 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl02'}
2018-10-16 18:54:46,439 [salt.state       :1941][INFO    ][3038] Completed state [ctl02] at time 18:54:46.439790 duration_in_ms=1.629
2018-10-16 18:54:46,440 [salt.state       :1770][INFO    ][3038] Running state [ctl02.mcp-ovs-ha.local] at time 18:54:46.440137
2018-10-16 18:54:46,440 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl02.mcp-ovs-ha.local]
2018-10-16 18:54:46,441 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl02.mcp-ovs-ha.local'}
2018-10-16 18:54:46,442 [salt.state       :1941][INFO    ][3038] Completed state [ctl02.mcp-ovs-ha.local] at time 18:54:46.442460 duration_in_ms=2.323
2018-10-16 18:54:46,442 [salt.state       :1770][INFO    ][3038] Running state [ctl03] at time 18:54:46.442863
2018-10-16 18:54:46,443 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl03]
2018-10-16 18:54:46,444 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl03'}
2018-10-16 18:54:46,444 [salt.state       :1941][INFO    ][3038] Completed state [ctl03] at time 18:54:46.444867 duration_in_ms=2.004
2018-10-16 18:54:46,445 [salt.state       :1770][INFO    ][3038] Running state [ctl03.mcp-ovs-ha.local] at time 18:54:46.445218
2018-10-16 18:54:46,445 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl03.mcp-ovs-ha.local]
2018-10-16 18:54:46,447 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl03.mcp-ovs-ha.local'}
2018-10-16 18:54:46,447 [salt.state       :1941][INFO    ][3038] Completed state [ctl03.mcp-ovs-ha.local] at time 18:54:46.447497 duration_in_ms=2.279
2018-10-16 18:54:46,447 [salt.state       :1770][INFO    ][3038] Running state [ctl01] at time 18:54:46.447868
2018-10-16 18:54:46,448 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl01]
2018-10-16 18:54:46,449 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl01'}
2018-10-16 18:54:46,449 [salt.state       :1941][INFO    ][3038] Completed state [ctl01] at time 18:54:46.449567 duration_in_ms=1.699
2018-10-16 18:54:46,449 [salt.state       :1770][INFO    ][3038] Running state [ctl01.mcp-ovs-ha.local] at time 18:54:46.449920
2018-10-16 18:54:46,450 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl01.mcp-ovs-ha.local]
2018-10-16 18:54:46,452 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl01.mcp-ovs-ha.local'}
2018-10-16 18:54:46,452 [salt.state       :1941][INFO    ][3038] Completed state [ctl01.mcp-ovs-ha.local] at time 18:54:46.452340 duration_in_ms=2.42
2018-10-16 18:54:46,452 [salt.state       :1770][INFO    ][3038] Running state [ctl] at time 18:54:46.452695
2018-10-16 18:54:46,452 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl]
2018-10-16 18:54:46,454 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl'}
2018-10-16 18:54:46,455 [salt.state       :1941][INFO    ][3038] Completed state [ctl] at time 18:54:46.454978 duration_in_ms=2.283
2018-10-16 18:54:46,455 [salt.state       :1770][INFO    ][3038] Running state [ctl.mcp-ovs-ha.local] at time 18:54:46.455338
2018-10-16 18:54:46,455 [salt.state       :1803][INFO    ][3038] Executing state host.present for [ctl.mcp-ovs-ha.local]
2018-10-16 18:54:46,457 [salt.state       :290 ][INFO    ][3038] {'host': 'ctl.mcp-ovs-ha.local'}
2018-10-16 18:54:46,457 [salt.state       :1941][INFO    ][3038] Completed state [ctl.mcp-ovs-ha.local] at time 18:54:46.457350 duration_in_ms=2.012
2018-10-16 18:54:46,457 [salt.state       :1770][INFO    ][3038] Running state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 18:54:46.457604
2018-10-16 18:54:46,457 [salt.state       :1803][INFO    ][3038] Executing state file.absent for [/etc/network/interfaces.d/50-cloud-init.cfg]
2018-10-16 18:54:46,459 [salt.state       :290 ][INFO    ][3038] {'removed': '/etc/network/interfaces.d/50-cloud-init.cfg'}
2018-10-16 18:54:46,459 [salt.state       :1941][INFO    ][3038] Completed state [/etc/network/interfaces.d/50-cloud-init.cfg] at time 18:54:46.459598 duration_in_ms=1.994
2018-10-16 18:54:46,461 [salt.state       :1770][INFO    ][3038] Running state [ens3] at time 18:54:46.461414
2018-10-16 18:54:46,461 [salt.state       :1803][INFO    ][3038] Executing state network.managed for [ens3]
2018-10-16 18:54:46,653 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['ifup', 'ens3'] in directory '/root'
2018-10-16 18:54:47,914 [salt.state       :290 ][INFO    ][3038] {'interface': 'Added network interface.', 'status': 'Interface ens3 is up'}
2018-10-16 18:54:47,915 [salt.state       :1941][INFO    ][3038] Completed state [ens3] at time 18:54:47.915453 duration_in_ms=1454.038
2018-10-16 18:54:47,917 [salt.state       :1770][INFO    ][3038] Running state [ens2] at time 18:54:47.916555
2018-10-16 18:54:47,917 [salt.state       :1803][INFO    ][3038] Executing state network.managed for [ens2]
2018-10-16 18:54:47,967 [salt.state       :290 ][INFO    ][3038] {'interface': 'Added network interface.'}
2018-10-16 18:54:47,968 [salt.state       :1941][INFO    ][3038] Completed state [ens2] at time 18:54:47.968381 duration_in_ms=51.826
2018-10-16 18:54:47,968 [salt.state       :1770][INFO    ][3038] Running state [linux_system_network] at time 18:54:47.968847
2018-10-16 18:54:47,969 [salt.state       :1803][INFO    ][3038] Executing state network.system for [linux_system_network]
2018-10-16 18:54:47,971 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'status', 'networking.service', '-n', '0'] in directory '/root'
2018-10-16 18:54:48,002 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-active', 'networking.service'] in directory '/root'
2018-10-16 18:54:48,041 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'status', 'NetworkManager.service', '-n', '0'] in directory '/root'
2018-10-16 18:54:48,080 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'networking.service'] in directory '/root'
2018-10-16 18:54:48,718 [salt.loaded.int.module.debian_ip:1970][WARNING ][3038] The network state sls is requiring a reboot of the system to properly apply network configuration.
2018-10-16 18:54:48,719 [salt.state       :290 ][INFO    ][3038] {'network_settings': u'--- \n+++ \n@@ -1,2 +1,4 @@\n NETWORKING=yes\n\n HOSTNAME=mdb01\n\n+DOMAIN=mcp-ovs-ha.local\n\n+SEARCH=maas\n'}
2018-10-16 18:54:48,719 [salt.state       :1941][INFO    ][3038] Completed state [linux_system_network] at time 18:54:48.719539 duration_in_ms=750.692
2018-10-16 18:54:48,720 [salt.state       :1770][INFO    ][3038] Running state [/etc/profile.d/proxy.sh] at time 18:54:48.720576
2018-10-16 18:54:48,720 [salt.state       :1803][INFO    ][3038] Executing state file.absent for [/etc/profile.d/proxy.sh]
2018-10-16 18:54:48,721 [salt.state       :290 ][INFO    ][3038] File /etc/profile.d/proxy.sh is not present
2018-10-16 18:54:48,722 [salt.state       :1941][INFO    ][3038] Completed state [/etc/profile.d/proxy.sh] at time 18:54:48.721959 duration_in_ms=1.383
2018-10-16 18:54:48,723 [salt.state       :1770][INFO    ][3038] Running state [/etc/apt/apt.conf.d/95proxies] at time 18:54:48.722813
2018-10-16 18:54:48,723 [salt.state       :1803][INFO    ][3038] Executing state file.absent for [/etc/apt/apt.conf.d/95proxies]
2018-10-16 18:54:48,723 [salt.state       :290 ][INFO    ][3038] File /etc/apt/apt.conf.d/95proxies is not present
2018-10-16 18:54:48,724 [salt.state       :1941][INFO    ][3038] Completed state [/etc/apt/apt.conf.d/95proxies] at time 18:54:48.724182 duration_in_ms=1.369
2018-10-16 18:54:48,726 [salt.state       :1770][INFO    ][3038] Running state [ntp] at time 18:54:48.726444
2018-10-16 18:54:48,726 [salt.state       :1803][INFO    ][3038] Executing state pkg.installed for [ntp]
2018-10-16 18:54:49,082 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 18:54:49,121 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ntp'] in directory '/root'
2018-10-16 18:54:51,308 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185451291755
2018-10-16 18:54:51,335 [salt.minion      :1431][INFO    ][6145] Starting a new job with PID 6145
2018-10-16 18:54:51,359 [salt.minion      :1708][INFO    ][6145] Returning information for job: 20181016185451291755
2018-10-16 18:54:54,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:54:54,418 [salt.state       :290 ][INFO    ][3038] Made the following changes:
'ntp' changed from 'absent' to '1:4.2.8p4+dfsg-3ubuntu5.9'
'libopts25' changed from 'absent' to '1:5.18.7-3'

2018-10-16 18:54:54,441 [salt.state       :905 ][INFO    ][3038] Loading fresh modules for state activity
2018-10-16 18:54:54,487 [salt.state       :1941][INFO    ][3038] Completed state [ntp] at time 18:54:54.487775 duration_in_ms=5761.331
2018-10-16 18:54:54,495 [salt.state       :1770][INFO    ][3038] Running state [/etc/ntp.conf] at time 18:54:54.495278
2018-10-16 18:54:54,495 [salt.state       :1803][INFO    ][3038] Executing state file.managed for [/etc/ntp.conf]
2018-10-16 18:54:54,791 [salt.fileclient  :1215][INFO    ][3038] Fetching file from saltenv 'base', ** done ** 'ntp/files/ntp.conf'
2018-10-16 18:54:54,884 [salt.state       :290 ][INFO    ][3038] File changed:
--- 
+++ 
@@ -1,66 +1,25 @@
-# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
 
-driftfile /var/lib/ntp/ntp.drift
 
-# Enable this if you want statistics to be logged.
-#statsdir /var/log/ntpstats/
+# ntpd will only synchronize your clock.
 
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
+# For details, see:
+# - the ntp.conf man page
+# - http://support.ntp.org/bin/view/Support/GettingStarted
+# - https://wiki.archlinux.org/index.php/Network_Time_Protocol_daemon
 
-# Specify one or more NTP servers.
+# Associate to cloud NTP pool servers
+server 1.se.pool.ntp.org iburst
+server 0.se.pool.ntp.org
 
-# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
-# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
-# more information.
-pool 0.ubuntu.pool.ntp.org iburst
-pool 1.ubuntu.pool.ntp.org iburst
-pool 2.ubuntu.pool.ntp.org iburst
-pool 3.ubuntu.pool.ntp.org iburst
+# Exchange time with everybody, but don't allow configuration.
+restrict -4 default kod nomodify notrap nopeer noquery
+restrict -6 default kod nomodify notrap nopeer noquery
 
-# Use Ubuntu's ntp server as a fallback.
-pool ntp.ubuntu.com
-
-# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
-# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
-# might also be helpful.
-#
-# Note that "restrict" applies to both servers and clients, so a configuration
-# that might be intended to block requests from certain clients could also end
-# up blocking replies from your own upstream servers.
-
-# By default, exchange time with everybody, but don't allow configuration.
-restrict -4 default kod notrap nomodify nopeer noquery limited
-restrict -6 default kod notrap nomodify nopeer noquery limited
-
-# Local users may interrogate the ntp server more closely.
+# Only allow read-only access from localhost
 restrict 127.0.0.1
 restrict ::1
 
-# Needed for adding pool entries
-restrict source notrap nomodify noquery
+# mode7 is required for collectd monitoring
 
-# Clients from this (example!) subnet have unlimited access, but only if
-# cryptographically authenticated.
-#restrict 192.168.123.0 mask 255.255.255.0 notrust
-
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-#broadcast 192.168.123.255
-
-# If you want to listen to time broadcasts on your local subnet, de-comment the
-# next lines.  Please do this only if you trust everybody on the network!
-#disable auth
-#broadcastclient
-
-#Changes recquired to use pps synchonisation as explained in documentation:
-#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
-
-#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
-#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
-
-#server 127.127.22.1                   # ATOM(PPS)
-#fudge 127.127.22.1 flag3 1            # enable PPS API
+# Location of drift file
+driftfile /var/lib/ntp/ntp.drift

2018-10-16 18:54:54,884 [salt.state       :1941][INFO    ][3038] Completed state [/etc/ntp.conf] at time 18:54:54.884505 duration_in_ms=389.226
2018-10-16 18:54:55,468 [salt.state       :1770][INFO    ][3038] Running state [ntp] at time 18:54:55.468184
2018-10-16 18:54:55,468 [salt.state       :1803][INFO    ][3038] Executing state service.running for [ntp]
2018-10-16 18:54:55,469 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'status', 'ntp.service', '-n', '0'] in directory '/root'
2018-10-16 18:54:55,488 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-16 18:54:55,506 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-enabled', 'ntp.service'] in directory '/root'
2018-10-16 18:54:55,527 [salt.state       :290 ][INFO    ][3038] The service ntp is already running
2018-10-16 18:54:55,528 [salt.state       :1941][INFO    ][3038] Completed state [ntp] at time 18:54:55.528438 duration_in_ms=60.254
2018-10-16 18:54:55,529 [salt.state       :1770][INFO    ][3038] Running state [ntp] at time 18:54:55.529021
2018-10-16 18:54:55,529 [salt.state       :1803][INFO    ][3038] Executing state service.mod_watch for [ntp]
2018-10-16 18:54:55,531 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemctl', 'is-active', 'ntp.service'] in directory '/root'
2018-10-16 18:54:55,548 [salt.loaded.int.module.cmdmod:395 ][INFO    ][3038] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ntp.service'] in directory '/root'
2018-10-16 18:54:55,634 [salt.state       :290 ][INFO    ][3038] {'ntp': True}
2018-10-16 18:54:55,635 [salt.state       :1941][INFO    ][3038] Completed state [ntp] at time 18:54:55.635345 duration_in_ms=106.323
2018-10-16 18:54:55,647 [salt.minion      :1708][INFO    ][3038] Returning information for job: 20181016185354667225
2018-10-16 18:54:59,894 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command ssh.set_auth_key with jid 20181016185459881921
2018-10-16 18:54:59,912 [salt.minion      :1431][INFO    ][6462] Starting a new job with PID 6462
2018-10-16 18:54:59,941 [salt.minion      :1708][INFO    ][6462] Returning information for job: 20181016185459881921
2018-10-16 18:55:17,537 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command pkg.upgrade with jid 20181016185517525828
2018-10-16 18:55:17,566 [salt.minion      :1431][INFO    ][6592] Starting a new job with PID 6592
2018-10-16 18:55:17,600 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:55:18,110 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6592] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'dist-upgrade'] in directory '/root'
2018-10-16 18:55:22,632 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185522618525
2018-10-16 18:55:22,666 [salt.minion      :1431][INFO    ][6735] Starting a new job with PID 6735
2018-10-16 18:55:22,704 [salt.minion      :1708][INFO    ][6735] Returning information for job: 20181016185522618525
2018-10-16 18:55:32,749 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185532728114
2018-10-16 18:55:32,784 [salt.minion      :1431][INFO    ][7003] Starting a new job with PID 7003
2018-10-16 18:55:32,813 [salt.minion      :1708][INFO    ][7003] Returning information for job: 20181016185532728114
2018-10-16 18:55:42,841 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185542821019
2018-10-16 18:55:42,867 [salt.minion      :1431][INFO    ][7711] Starting a new job with PID 7711
2018-10-16 18:55:42,898 [salt.minion      :1708][INFO    ][7711] Returning information for job: 20181016185542821019
2018-10-16 18:55:46,494 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][6592] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:55:46,543 [salt.minion      :1708][INFO    ][6592] Returning information for job: 20181016185517525828
2018-10-16 18:56:01,235 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command test.ping with jid 20181016185601224086
2018-10-16 18:56:01,268 [salt.minion      :1431][INFO    ][7820] Starting a new job with PID 7820
2018-10-16 18:56:01,303 [salt.minion      :1708][INFO    ][7820] Returning information for job: 20181016185601224086
2018-10-16 18:57:49,436 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016185749421183
2018-10-16 18:57:49,460 [salt.minion      :1431][INFO    ][7825] Starting a new job with PID 7825
2018-10-16 18:57:50,603 [salt.state       :905 ][INFO    ][7825] Loading fresh modules for state activity
2018-10-16 18:57:50,668 [salt.fileclient  :1215][INFO    ][7825] Fetching file from saltenv 'base', ** done ** 'keepalived/init.sls'
2018-10-16 18:57:50,707 [salt.fileclient  :1215][INFO    ][7825] Fetching file from saltenv 'base', ** done ** 'keepalived/cluster.sls'
2018-10-16 18:57:51,516 [salt.state       :1770][INFO    ][7825] Running state [keepalived] at time 18:57:51.516412
2018-10-16 18:57:51,516 [salt.state       :1803][INFO    ][7825] Executing state pkg.installed for [keepalived]
2018-10-16 18:57:51,517 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:57:52,020 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['apt-cache', '-q', 'policy', 'keepalived'] in directory '/root'
2018-10-16 18:57:52,190 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 18:57:54,296 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 18:57:54,329 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'keepalived'] in directory '/root'
2018-10-16 18:57:54,490 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016185754474281
2018-10-16 18:57:54,512 [salt.minion      :1431][INFO    ][8189] Starting a new job with PID 8189
2018-10-16 18:57:54,529 [salt.minion      :1708][INFO    ][8189] Returning information for job: 20181016185754474281
2018-10-16 18:57:59,246 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 18:57:59,297 [salt.state       :290 ][INFO    ][7825] Made the following changes:
'libsnmp30' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'libsensors4' changed from 'absent' to '1:3.4.0-2'
'libsnmp-base' changed from 'absent' to '5.7.3+dfsg-1ubuntu4.2'
'keepalived' changed from 'absent' to '1:1.3.9-1ubuntu0.18.04.1~cloud0'
'ipvsadm' changed from 'absent' to '1:1.28-3'
'libnl-route-3-200' changed from 'absent' to '3.2.27-1ubuntu0.16.04.1'

2018-10-16 18:57:59,322 [salt.state       :905 ][INFO    ][7825] Loading fresh modules for state activity
2018-10-16 18:57:59,366 [salt.state       :1941][INFO    ][7825] Completed state [keepalived] at time 18:57:59.365939 duration_in_ms=7849.528
2018-10-16 18:57:59,372 [salt.state       :1770][INFO    ][7825] Running state [lsof] at time 18:57:59.372702
2018-10-16 18:57:59,373 [salt.state       :1803][INFO    ][7825] Executing state pkg.installed for [lsof]
2018-10-16 18:58:00,120 [salt.state       :290 ][INFO    ][7825] All specified packages are already installed
2018-10-16 18:58:00,122 [salt.state       :1941][INFO    ][7825] Completed state [lsof] at time 18:58:00.121933 duration_in_ms=749.23
2018-10-16 18:58:00,128 [salt.state       :1770][INFO    ][7825] Running state [/etc/keepalived/keepalived.conf] at time 18:58:00.128612
2018-10-16 18:58:00,129 [salt.state       :1803][INFO    ][7825] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-16 18:58:00,158 [salt.fileclient  :1215][INFO    ][7825] Fetching file from saltenv 'base', ** done ** 'keepalived/files/keepalived.conf'
2018-10-16 18:58:00,216 [salt.state       :290 ][INFO    ][7825] File changed:
New file
2018-10-16 18:58:00,217 [salt.state       :1941][INFO    ][7825] Completed state [/etc/keepalived/keepalived.conf] at time 18:58:00.217580 duration_in_ms=88.968
2018-10-16 18:58:00,218 [salt.state       :1770][INFO    ][7825] Running state [keepalived] at time 18:58:00.218839
2018-10-16 18:58:00,219 [salt.state       :1803][INFO    ][7825] Executing state service.running for [keepalived]
2018-10-16 18:58:00,220 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-16 18:58:00,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-16 18:58:00,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-16 18:58:00,300 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'keepalived.service'] in directory '/root'
2018-10-16 18:58:00,390 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-16 18:58:00,410 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-16 18:58:00,435 [salt.loaded.int.module.cmdmod:395 ][INFO    ][7825] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-16 18:58:00,455 [salt.state       :290 ][INFO    ][7825] {'keepalived': True}
2018-10-16 18:58:00,456 [salt.state       :1941][INFO    ][7825] Completed state [keepalived] at time 18:58:00.456243 duration_in_ms=237.403
2018-10-16 18:58:00,458 [salt.minion      :1708][INFO    ][7825] Returning information for job: 20181016185749421183
2018-10-16 19:00:18,455 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command pillar.get with jid 20181016190018445742
2018-10-16 19:00:18,489 [salt.minion      :1431][INFO    ][9200] Starting a new job with PID 9200
2018-10-16 19:00:18,501 [salt.minion      :1708][INFO    ][9200] Returning information for job: 20181016190018445742
2018-10-16 19:13:18,636 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016191318626169
2018-10-16 19:13:18,661 [salt.minion      :1431][INFO    ][9258] Starting a new job with PID 9258
2018-10-16 19:13:23,853 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016191323842862
2018-10-16 19:13:23,877 [salt.minion      :1431][INFO    ][9263] Starting a new job with PID 9263
2018-10-16 19:13:23,900 [salt.minion      :1708][INFO    ][9263] Returning information for job: 20181016191323842862
2018-10-16 19:13:27,897 [salt.state       :905 ][INFO    ][9258] Loading fresh modules for state activity
2018-10-16 19:13:29,523 [salt.fileclient  :1215][INFO    ][9258] Fetching file from saltenv 'base', ** done ** 'memcached/init.sls'
2018-10-16 19:13:29,559 [salt.fileclient  :1215][INFO    ][9258] Fetching file from saltenv 'base', ** done ** 'memcached/server.sls'
2018-10-16 19:13:29,584 [salt.fileclient  :1215][INFO    ][9258] Fetching file from saltenv 'base', ** done ** 'memcached/map.jinja'
2018-10-16 19:13:30,410 [salt.state       :1770][INFO    ][9258] Running state [memcached] at time 19:13:30.410654
2018-10-16 19:13:30,411 [salt.state       :1803][INFO    ][9258] Executing state pkg.installed for [memcached]
2018-10-16 19:13:30,412 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:13:30,966 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['apt-cache', '-q', 'policy', 'memcached'] in directory '/root'
2018-10-16 19:13:31,119 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 19:13:33,354 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 19:13:33,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'memcached'] in directory '/root'
2018-10-16 19:13:34,053 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016191334041676
2018-10-16 19:13:34,074 [salt.minion      :1431][INFO    ][9641] Starting a new job with PID 9641
2018-10-16 19:13:34,097 [salt.minion      :1708][INFO    ][9641] Returning information for job: 20181016191334041676
2018-10-16 19:13:37,550 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:13:37,597 [salt.state       :290 ][INFO    ][9258] Made the following changes:
'memcached' changed from 'absent' to '1.4.25-2ubuntu1.4'

2018-10-16 19:13:37,624 [salt.state       :905 ][INFO    ][9258] Loading fresh modules for state activity
2018-10-16 19:13:37,677 [salt.state       :1941][INFO    ][9258] Completed state [memcached] at time 19:13:37.677323 duration_in_ms=7266.67
2018-10-16 19:13:37,689 [salt.state       :1770][INFO    ][9258] Running state [python-memcache] at time 19:13:37.689944
2018-10-16 19:13:37,690 [salt.state       :1803][INFO    ][9258] Executing state pkg.installed for [python-memcache]
2018-10-16 19:13:38,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 19:13:38,610 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-memcache'] in directory '/root'
2018-10-16 19:13:40,921 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:13:40,968 [salt.state       :290 ][INFO    ][9258] Made the following changes:
'python-memcache' changed from 'absent' to '1.57+fixed-1~u16.04+mcp1'

2018-10-16 19:13:40,990 [salt.state       :905 ][INFO    ][9258] Loading fresh modules for state activity
2018-10-16 19:13:41,039 [salt.state       :1941][INFO    ][9258] Completed state [python-memcache] at time 19:13:41.039162 duration_in_ms=3349.217
2018-10-16 19:13:41,044 [salt.state       :1770][INFO    ][9258] Running state [/etc/memcached.conf] at time 19:13:41.044684
2018-10-16 19:13:41,045 [salt.state       :1803][INFO    ][9258] Executing state file.managed for [/etc/memcached.conf]
2018-10-16 19:13:41,076 [salt.fileclient  :1215][INFO    ][9258] Fetching file from saltenv 'base', ** done ** 'memcached/files/memcached.conf'
2018-10-16 19:13:41,110 [salt.state       :290 ][INFO    ][9258] File changed:
--- 
+++ 
@@ -1,11 +1,10 @@
+
 # memcached default config file
 # 2003 - Jay Bonci <jaybonci@debian.org>
-# This configuration file is read by the start-memcached script provided as
-# part of the Debian GNU/Linux distribution.
+# This configuration file is read by the start-memcached script provided as part of the Debian GNU/Linux distribution. 
 
 # Run memcached as a daemon. This command is implied, and is not needed for the
-# daemon to run. See the README.Debian that comes with this package for more
-# information.
+# daemon to run. See the README.Debian that comes with this package for more information.
 -d
 
 # Log memcached's output to /var/log/memcached
@@ -18,13 +17,13 @@
 # -vv
 
 # Start with a cap of 64 megs of memory. It's reasonable, and the daemon default
-# Note that the daemon will grow to this size, but does not start out holding this much
-# memory
+# Note that the daemon will grow to this size, but does not start out holding this much memory
 -m 64
 
 # Default connection port is 11211
 -p 11211
 
+-U 11211
 # Run the daemon as root. The start-memcached will default to running as root if no
 # -u command is present in this config file
 -u memcache
@@ -32,10 +31,12 @@
 # Specify which IP address to listen on. The default is to listen on all IP addresses
 # This parameter is one of the only security measures that memcached has, so make sure
 # it's listening on a firewalled interface.
--l 127.0.0.1
+-l 0.0.0.0
 
 # Limit the number of simultaneous incoming connections. The daemon default is 1024
 # -c 1024
+# Mirantis
+-c 8192
 
 # Lock down all paged memory. Consult with the README and homepage before you do this
 # -k
@@ -45,3 +46,9 @@
 
 # Maximize core file limit
 # -r
+
+# Number of threads to use to process incoming requests.
+-t 1
+
+# Set size of each slab page. Default value for this parameter is 1m, minimum is 1k, max is 128m.
+-I 1m

2018-10-16 19:13:41,121 [salt.state       :1941][INFO    ][9258] Completed state [/etc/memcached.conf] at time 19:13:41.121740 duration_in_ms=77.056
2018-10-16 19:13:41,717 [salt.state       :1770][INFO    ][9258] Running state [memcached] at time 19:13:41.717062
2018-10-16 19:13:41,718 [salt.state       :1803][INFO    ][9258] Executing state service.running for [memcached]
2018-10-16 19:13:41,719 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-16 19:13:41,738 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-16 19:13:41,754 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-16 19:13:41,773 [salt.state       :290 ][INFO    ][9258] The service memcached is already running
2018-10-16 19:13:41,775 [salt.state       :1941][INFO    ][9258] Completed state [memcached] at time 19:13:41.774867 duration_in_ms=57.805
2018-10-16 19:13:41,775 [salt.state       :1770][INFO    ][9258] Running state [memcached] at time 19:13:41.775881
2018-10-16 19:13:41,776 [salt.state       :1803][INFO    ][9258] Executing state service.mod_watch for [memcached]
2018-10-16 19:13:41,777 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-16 19:13:41,799 [salt.loaded.int.module.cmdmod:395 ][INFO    ][9258] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'memcached.service'] in directory '/root'
2018-10-16 19:13:41,844 [salt.state       :290 ][INFO    ][9258] {'memcached': True}
2018-10-16 19:13:41,845 [salt.state       :1941][INFO    ][9258] Completed state [memcached] at time 19:13:41.845660 duration_in_ms=69.779
2018-10-16 19:13:41,849 [salt.minion      :1708][INFO    ][9258] Returning information for job: 20181016191318626169
2018-10-16 19:13:42,771 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016191342758756
2018-10-16 19:13:42,800 [salt.minion      :1431][INFO    ][10239] Starting a new job with PID 10239
2018-10-16 19:13:47,989 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016191347975571
2018-10-16 19:13:48,017 [salt.minion      :1431][INFO    ][10244] Starting a new job with PID 10244
2018-10-16 19:13:48,038 [salt.minion      :1708][INFO    ][10244] Returning information for job: 20181016191347975571
2018-10-16 19:13:53,235 [salt.state       :905 ][INFO    ][10239] Loading fresh modules for state activity
2018-10-16 19:13:55,580 [salt.fileclient  :1215][INFO    ][10239] Fetching file from saltenv 'base', ** done ** 'haproxy/init.sls'
2018-10-16 19:13:55,617 [salt.fileclient  :1215][INFO    ][10239] Fetching file from saltenv 'base', ** done ** 'haproxy/proxy.sls'
2018-10-16 19:13:56,528 [salt.state       :1770][INFO    ][10239] Running state [haproxy] at time 19:13:56.528459
2018-10-16 19:13:56,528 [salt.state       :1803][INFO    ][10239] Executing state pkg.installed for [haproxy]
2018-10-16 19:13:56,529 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:13:57,055 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['apt-cache', '-q', 'policy', 'haproxy'] in directory '/root'
2018-10-16 19:13:57,245 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 19:13:58,013 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016191357994629
2018-10-16 19:13:58,047 [salt.minion      :1431][INFO    ][10474] Starting a new job with PID 10474
2018-10-16 19:13:58,078 [salt.minion      :1708][INFO    ][10474] Returning information for job: 20181016191357994629
2018-10-16 19:13:59,757 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 19:13:59,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'haproxy'] in directory '/root'
2018-10-16 19:14:04,593 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:14:04,653 [salt.state       :290 ][INFO    ][10239] Made the following changes:
'haproxy' changed from 'absent' to '1.6.3-1ubuntu0.1'
'liblua5.3-0' changed from 'absent' to '5.3.1-1ubuntu2'

2018-10-16 19:14:04,684 [salt.state       :905 ][INFO    ][10239] Loading fresh modules for state activity
2018-10-16 19:14:04,741 [salt.state       :1941][INFO    ][10239] Completed state [haproxy] at time 19:14:04.741708 duration_in_ms=8213.25
2018-10-16 19:14:04,749 [salt.state       :1770][INFO    ][10239] Running state [/etc/default/haproxy] at time 19:14:04.749087
2018-10-16 19:14:04,750 [salt.state       :1803][INFO    ][10239] Executing state file.managed for [/etc/default/haproxy]
2018-10-16 19:14:04,796 [salt.fileclient  :1215][INFO    ][10239] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.default'
2018-10-16 19:14:04,801 [salt.state       :290 ][INFO    ][10239] File changed:
--- 
+++ 
@@ -1,10 +1,5 @@
-# Defaults file for HAProxy
-#
-# This is sourced by both, the initscript and the systemd unit file, so do not
-# treat it as a shell script fragment.
 
-# Change the config file location if needed
-#CONFIG="/etc/haproxy/haproxy.cfg"
-
-# Add extra flags here, see haproxy(1) for a few options
+# Set ENABLED to 1 if you want the init script to start haproxy.
+ENABLED=1
+# Add extra flags here.
 #EXTRAOPTS="-de -m 16"

2018-10-16 19:14:04,806 [salt.state       :1941][INFO    ][10239] Completed state [/etc/default/haproxy] at time 19:14:04.806224 duration_in_ms=57.138
2018-10-16 19:14:04,806 [salt.state       :1770][INFO    ][10239] Running state [/etc/haproxy/haproxy.cfg] at time 19:14:04.806840
2018-10-16 19:14:04,808 [salt.state       :1803][INFO    ][10239] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-16 19:14:04,836 [salt.fileclient  :1215][INFO    ][10239] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy.cfg'
2018-10-16 19:14:05,073 [salt.state       :290 ][INFO    ][10239] File changed:
--- 
+++ 
@@ -1,35 +1,78 @@
 global
-	log /dev/log	local0
-	log /dev/log	local1 notice
-	chroot /var/lib/haproxy
-	stats socket /run/haproxy/admin.sock mode 660 level admin
-	stats timeout 30s
-	user haproxy
-	group haproxy
-	daemon
-
-	# Default SSL material locations
-	ca-base /etc/ssl/certs
-	crt-base /etc/ssl/private
-
-	# Default ciphers to use on SSL-enabled listening sockets.
-	# For more information, see ciphers(1SSL). This list is from:
-	#  https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
-	ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS
-	ssl-default-bind-options no-sslv3
+  log /dev/log  local0
+  log /dev/log  local1 notice
+  chroot /var/lib/haproxy
+  stats  socket /run/haproxy/admin.sock mode 660 level admin
+  stats timeout 30s
+  user  haproxy
+  group haproxy
+  daemon
+  pidfile  /var/run/haproxy.pid
+  spread-checks 4
+  tune.maxrewrite 1024
+  tune.bufsize 32768
+  maxconn  16000
+  # SSL options
+  ca-base /etc/haproxy/ssl
+  crt-base /etc/haproxy/ssl
+  tune.ssl.default-dh-param 2048
+  ssl-default-bind-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-bind-options no-sslv3 no-tls-tickets
+  ssl-default-server-ciphers ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS
+  ssl-default-server-options no-sslv3 no-tls-tickets
 
 defaults
-	log	global
-	mode	http
-	option	httplog
-	option	dontlognull
-        timeout connect 5000
-        timeout client  50000
-        timeout server  50000
-	errorfile 400 /etc/haproxy/errors/400.http
-	errorfile 403 /etc/haproxy/errors/403.http
-	errorfile 408 /etc/haproxy/errors/408.http
-	errorfile 500 /etc/haproxy/errors/500.http
-	errorfile 502 /etc/haproxy/errors/502.http
-	errorfile 503 /etc/haproxy/errors/503.http
-	errorfile 504 /etc/haproxy/errors/504.http
+  log  global
+  mode http
+
+  maxconn 8000
+  option  redispatch
+  retries  3
+  stats  enable
+
+  timeout http-request 10s
+  timeout queue 1m
+  timeout connect 10s
+  timeout client 1m
+  timeout server 1m
+  timeout check 10s
+
+listen ceilometer_api
+  bind 192.168.10.31:8777 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8777 check
+  server mdb02 192.168.10.33:8777 check
+  server mdb03 192.168.10.34:8777 check
+
+listen panko_api
+  bind 192.168.10.31:8977 
+  mode http
+  balance roundrobin
+  option  httplog
+  server mdb01 192.168.10.32:8977 check
+  server mdb02 192.168.10.33:8977 check
+  server mdb03 192.168.10.34:8977 check
+
+listen gnocchi_api
+  bind 192.168.10.31:8041 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8041 check
+  server mdb02 192.168.10.33:8041 check
+  server mdb03 192.168.10.34:8041 check
+
+listen aodh-api
+  bind 192.168.10.31:8042 
+  # NOTE(vsaienko): by default haproxy uses OPTIONS method when doing check
+  # This is not guaranteed by openstack APIs, change it to GET instead
+  option  httpchk GET /
+  option  httplog
+  option  httpclose
+  server mdb01 192.168.10.32:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb02 192.168.10.33:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3
+  server mdb03 192.168.10.34:8042 check inter 10s fastinter 2s downinter 3s rise 3 fall 3

2018-10-16 19:14:05,081 [salt.state       :1941][INFO    ][10239] Completed state [/etc/haproxy/haproxy.cfg] at time 19:14:05.081293 duration_in_ms=274.453
2018-10-16 19:14:05,081 [salt.state       :1770][INFO    ][10239] Running state [/etc/haproxy/ssl] at time 19:14:05.081703
2018-10-16 19:14:05,082 [salt.state       :1803][INFO    ][10239] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-16 19:14:05,093 [salt.state       :290 ][INFO    ][10239] {'/etc/haproxy/ssl': 'New Dir'}
2018-10-16 19:14:05,093 [salt.state       :1941][INFO    ][10239] Completed state [/etc/haproxy/ssl] at time 19:14:05.093490 duration_in_ms=11.787
2018-10-16 19:14:05,094 [salt.state       :1770][INFO    ][10239] Running state [/etc/haproxy/errors/429.http11] at time 19:14:05.093896
2018-10-16 19:14:05,094 [salt.state       :1803][INFO    ][10239] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-16 19:14:05,110 [salt.fileclient  :1215][INFO    ][10239] Fetching file from saltenv 'base', ** done ** 'haproxy/files/errors/429.http11'
2018-10-16 19:14:05,124 [salt.state       :290 ][INFO    ][10239] File changed:
New file
2018-10-16 19:14:05,125 [salt.state       :1941][INFO    ][10239] Completed state [/etc/haproxy/errors/429.http11] at time 19:14:05.125034 duration_in_ms=31.138
2018-10-16 19:14:05,126 [salt.state       :1770][INFO    ][10239] Running state [haproxy_status_packages] at time 19:14:05.126439
2018-10-16 19:14:05,126 [salt.state       :1803][INFO    ][10239] Executing state pkg.installed for [haproxy_status_packages]
2018-10-16 19:14:05,972 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 19:14:06,009 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'socat'] in directory '/root'
2018-10-16 19:14:08,147 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016191408137710
2018-10-16 19:14:08,168 [salt.minion      :1431][INFO    ][11325] Starting a new job with PID 11325
2018-10-16 19:14:08,188 [salt.minion      :1708][INFO    ][11325] Returning information for job: 20181016191408137710
2018-10-16 19:14:08,387 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:14:08,442 [salt.state       :290 ][INFO    ][10239] Made the following changes:
'socat' changed from 'absent' to '1.7.3.1-1'

2018-10-16 19:14:08,466 [salt.state       :905 ][INFO    ][10239] Loading fresh modules for state activity
2018-10-16 19:14:08,532 [salt.state       :1941][INFO    ][10239] Completed state [haproxy_status_packages] at time 19:14:08.532821 duration_in_ms=3406.381
2018-10-16 19:14:08,538 [salt.state       :1770][INFO    ][10239] Running state [/usr/bin/haproxy-status.sh] at time 19:14:08.538717
2018-10-16 19:14:08,539 [salt.state       :1803][INFO    ][10239] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-16 19:14:08,563 [salt.fileclient  :1215][INFO    ][10239] Fetching file from saltenv 'base', ** done ** 'haproxy/files/haproxy-status.sh'
2018-10-16 19:14:08,594 [salt.state       :290 ][INFO    ][10239] File changed:
New file
2018-10-16 19:14:08,596 [salt.state       :1941][INFO    ][10239] Completed state [/usr/bin/haproxy-status.sh] at time 19:14:08.596278 duration_in_ms=57.561
2018-10-16 19:14:08,599 [salt.state       :1770][INFO    ][10239] Running state [net.ipv4.ip_nonlocal_bind] at time 19:14:08.599362
2018-10-16 19:14:08,599 [salt.state       :1803][INFO    ][10239] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-16 19:14:08,603 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command 'sysctl -w net.ipv4.ip_nonlocal_bind="1"' in directory '/root'
2018-10-16 19:14:08,620 [salt.state       :290 ][INFO    ][10239] {'net.ipv4.ip_nonlocal_bind': 1}
2018-10-16 19:14:08,621 [salt.state       :1941][INFO    ][10239] Completed state [net.ipv4.ip_nonlocal_bind] at time 19:14:08.621359 duration_in_ms=21.996
2018-10-16 19:14:09,194 [salt.state       :1770][INFO    ][10239] Running state [haproxy] at time 19:14:09.194200
2018-10-16 19:14:09,195 [salt.state       :1803][INFO    ][10239] Executing state service.running for [haproxy]
2018-10-16 19:14:09,196 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-16 19:14:09,221 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 19:14:09,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-16 19:14:09,264 [salt.state       :290 ][INFO    ][10239] The service haproxy is already running
2018-10-16 19:14:09,265 [salt.state       :1941][INFO    ][10239] Completed state [haproxy] at time 19:14:09.265248 duration_in_ms=71.049
2018-10-16 19:14:09,266 [salt.state       :1770][INFO    ][10239] Running state [haproxy] at time 19:14:09.266400
2018-10-16 19:14:09,267 [salt.state       :1803][INFO    ][10239] Executing state service.mod_watch for [haproxy]
2018-10-16 19:14:09,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 19:14:09,291 [salt.loaded.int.module.cmdmod:395 ][INFO    ][10239] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'haproxy.service'] in directory '/root'
2018-10-16 19:14:09,333 [salt.state       :290 ][INFO    ][10239] {'haproxy': True}
2018-10-16 19:14:09,333 [salt.state       :1941][INFO    ][10239] Completed state [haproxy] at time 19:14:09.333798 duration_in_ms=67.397
2018-10-16 19:14:09,341 [salt.minion      :1708][INFO    ][10239] Returning information for job: 20181016191342758756
2018-10-16 19:14:10,104 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command service.status with jid 20181016191410093260
2018-10-16 19:14:10,129 [salt.minion      :1431][INFO    ][11423] Starting a new job with PID 11423
2018-10-16 19:14:10,715 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11423] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-16 19:14:10,739 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11423] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 19:14:10,759 [salt.minion      :1708][INFO    ][11423] Returning information for job: 20181016191410093260
2018-10-16 19:14:11,668 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command service.restart with jid 20181016191411654746
2018-10-16 19:14:11,703 [salt.minion      :1431][INFO    ][11431] Starting a new job with PID 11431
2018-10-16 19:14:12,301 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11431] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-16 19:14:12,354 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11431] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-16 19:14:12,404 [salt.minion      :1708][INFO    ][11431] Returning information for job: 20181016191411654746
2018-10-16 19:33:25,458 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command test.ping with jid 20181016193325449835
2018-10-16 19:33:25,498 [salt.minion      :1431][INFO    ][11524] Starting a new job with PID 11524
2018-10-16 19:33:25,536 [salt.minion      :1708][INFO    ][11524] Returning information for job: 20181016193325449835
2018-10-16 19:33:58,464 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016193358454026
2018-10-16 19:33:58,497 [salt.minion      :1431][INFO    ][11529] Starting a new job with PID 11529
2018-10-16 19:33:59,621 [salt.state       :905 ][INFO    ][11529] Loading fresh modules for state activity
2018-10-16 19:34:00,657 [salt.state       :1770][INFO    ][11529] Running state [keepalived] at time 19:34:00.657243
2018-10-16 19:34:00,658 [salt.state       :1803][INFO    ][11529] Executing state pkg.installed for [keepalived]
2018-10-16 19:34:00,659 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11529] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:34:01,219 [salt.state       :290 ][INFO    ][11529] All specified packages are already installed
2018-10-16 19:34:01,222 [salt.state       :1941][INFO    ][11529] Completed state [keepalived] at time 19:34:01.221869 duration_in_ms=564.626
2018-10-16 19:34:01,223 [salt.state       :1770][INFO    ][11529] Running state [lsof] at time 19:34:01.223034
2018-10-16 19:34:01,223 [salt.state       :1803][INFO    ][11529] Executing state pkg.installed for [lsof]
2018-10-16 19:34:01,236 [salt.state       :290 ][INFO    ][11529] All specified packages are already installed
2018-10-16 19:34:01,236 [salt.state       :1941][INFO    ][11529] Completed state [lsof] at time 19:34:01.236826 duration_in_ms=13.792
2018-10-16 19:34:01,243 [salt.state       :1770][INFO    ][11529] Running state [/etc/keepalived/keepalived.conf] at time 19:34:01.242963
2018-10-16 19:34:01,243 [salt.state       :1803][INFO    ][11529] Executing state file.managed for [/etc/keepalived/keepalived.conf]
2018-10-16 19:34:01,335 [salt.state       :290 ][INFO    ][11529] File /etc/keepalived/keepalived.conf is in the correct state
2018-10-16 19:34:01,335 [salt.state       :1941][INFO    ][11529] Completed state [/etc/keepalived/keepalived.conf] at time 19:34:01.335834 duration_in_ms=92.872
2018-10-16 19:34:01,337 [salt.state       :1770][INFO    ][11529] Running state [keepalived] at time 19:34:01.337248
2018-10-16 19:34:01,337 [salt.state       :1803][INFO    ][11529] Executing state service.running for [keepalived]
2018-10-16 19:34:01,338 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11529] Executing command ['systemctl', 'status', 'keepalived.service', '-n', '0'] in directory '/root'
2018-10-16 19:34:01,390 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11529] Executing command ['systemctl', 'is-active', 'keepalived.service'] in directory '/root'
2018-10-16 19:34:01,417 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11529] Executing command ['systemctl', 'is-enabled', 'keepalived.service'] in directory '/root'
2018-10-16 19:34:01,440 [salt.state       :290 ][INFO    ][11529] The service keepalived is already running
2018-10-16 19:34:01,441 [salt.state       :1941][INFO    ][11529] Completed state [keepalived] at time 19:34:01.440866 duration_in_ms=103.617
2018-10-16 19:34:01,444 [salt.minion      :1708][INFO    ][11529] Returning information for job: 20181016193358454026
2018-10-16 19:34:46,832 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command pillar.get with jid 20181016193446821830
2018-10-16 19:34:46,860 [salt.minion      :1431][INFO    ][11555] Starting a new job with PID 11555
2018-10-16 19:34:46,872 [salt.minion      :1708][INFO    ][11555] Returning information for job: 20181016193446821830
2018-10-16 19:37:30,740 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016193730731386
2018-10-16 19:37:30,764 [salt.minion      :1431][INFO    ][11571] Starting a new job with PID 11571
2018-10-16 19:37:32,845 [salt.state       :905 ][INFO    ][11571] Loading fresh modules for state activity
2018-10-16 19:37:34,449 [salt.state       :1770][INFO    ][11571] Running state [memcached] at time 19:37:34.449500
2018-10-16 19:37:34,450 [salt.state       :1803][INFO    ][11571] Executing state pkg.installed for [memcached]
2018-10-16 19:37:34,453 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11571] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:37:34,979 [salt.state       :290 ][INFO    ][11571] All specified packages are already installed
2018-10-16 19:37:34,980 [salt.state       :1941][INFO    ][11571] Completed state [memcached] at time 19:37:34.980505 duration_in_ms=531.004
2018-10-16 19:37:34,981 [salt.state       :1770][INFO    ][11571] Running state [python-memcache] at time 19:37:34.981747
2018-10-16 19:37:34,982 [salt.state       :1803][INFO    ][11571] Executing state pkg.installed for [python-memcache]
2018-10-16 19:37:34,994 [salt.state       :290 ][INFO    ][11571] All specified packages are already installed
2018-10-16 19:37:34,994 [salt.state       :1941][INFO    ][11571] Completed state [python-memcache] at time 19:37:34.994683 duration_in_ms=12.936
2018-10-16 19:37:35,000 [salt.state       :1770][INFO    ][11571] Running state [/etc/memcached.conf] at time 19:37:34.999963
2018-10-16 19:37:35,001 [salt.state       :1803][INFO    ][11571] Executing state file.managed for [/etc/memcached.conf]
2018-10-16 19:37:35,061 [salt.state       :290 ][INFO    ][11571] File /etc/memcached.conf is in the correct state
2018-10-16 19:37:35,062 [salt.state       :1941][INFO    ][11571] Completed state [/etc/memcached.conf] at time 19:37:35.062667 duration_in_ms=62.703
2018-10-16 19:37:35,064 [salt.state       :1770][INFO    ][11571] Running state [memcached] at time 19:37:35.064726
2018-10-16 19:37:35,065 [salt.state       :1803][INFO    ][11571] Executing state service.running for [memcached]
2018-10-16 19:37:35,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11571] Executing command ['systemctl', 'status', 'memcached.service', '-n', '0'] in directory '/root'
2018-10-16 19:37:35,118 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11571] Executing command ['systemctl', 'is-active', 'memcached.service'] in directory '/root'
2018-10-16 19:37:35,140 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11571] Executing command ['systemctl', 'is-enabled', 'memcached.service'] in directory '/root'
2018-10-16 19:37:35,161 [salt.state       :290 ][INFO    ][11571] The service memcached is already running
2018-10-16 19:37:35,162 [salt.state       :1941][INFO    ][11571] Completed state [memcached] at time 19:37:35.162069 duration_in_ms=97.344
2018-10-16 19:37:35,165 [salt.minion      :1708][INFO    ][11571] Returning information for job: 20181016193730731386
2018-10-16 19:37:36,327 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016193736313846
2018-10-16 19:37:36,361 [salt.minion      :1431][INFO    ][11597] Starting a new job with PID 11597
2018-10-16 19:37:41,555 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016193741545341
2018-10-16 19:37:41,583 [salt.minion      :1431][INFO    ][11602] Starting a new job with PID 11602
2018-10-16 19:37:41,611 [salt.minion      :1708][INFO    ][11602] Returning information for job: 20181016193741545341
2018-10-16 19:37:45,529 [salt.state       :905 ][INFO    ][11597] Loading fresh modules for state activity
2018-10-16 19:37:47,859 [salt.state       :1770][INFO    ][11597] Running state [haproxy] at time 19:37:47.859697
2018-10-16 19:37:47,860 [salt.state       :1803][INFO    ][11597] Executing state pkg.installed for [haproxy]
2018-10-16 19:37:47,861 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11597] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 19:37:48,454 [salt.state       :290 ][INFO    ][11597] All specified packages are already installed
2018-10-16 19:37:48,454 [salt.state       :1941][INFO    ][11597] Completed state [haproxy] at time 19:37:48.454753 duration_in_ms=595.056
2018-10-16 19:37:48,461 [salt.state       :1770][INFO    ][11597] Running state [/etc/default/haproxy] at time 19:37:48.461162
2018-10-16 19:37:48,461 [salt.state       :1803][INFO    ][11597] Executing state file.managed for [/etc/default/haproxy]
2018-10-16 19:37:48,487 [salt.state       :290 ][INFO    ][11597] File /etc/default/haproxy is in the correct state
2018-10-16 19:37:48,487 [salt.state       :1941][INFO    ][11597] Completed state [/etc/default/haproxy] at time 19:37:48.487474 duration_in_ms=26.313
2018-10-16 19:37:48,487 [salt.state       :1770][INFO    ][11597] Running state [/etc/haproxy/haproxy.cfg] at time 19:37:48.487840
2018-10-16 19:37:48,488 [salt.state       :1803][INFO    ][11597] Executing state file.managed for [/etc/haproxy/haproxy.cfg]
2018-10-16 19:37:48,705 [salt.state       :290 ][INFO    ][11597] File /etc/haproxy/haproxy.cfg is in the correct state
2018-10-16 19:37:48,706 [salt.state       :1941][INFO    ][11597] Completed state [/etc/haproxy/haproxy.cfg] at time 19:37:48.706430 duration_in_ms=218.589
2018-10-16 19:37:48,706 [salt.state       :1770][INFO    ][11597] Running state [/etc/haproxy/ssl] at time 19:37:48.706811
2018-10-16 19:37:48,707 [salt.state       :1803][INFO    ][11597] Executing state file.directory for [/etc/haproxy/ssl]
2018-10-16 19:37:48,708 [salt.state       :290 ][INFO    ][11597] Directory /etc/haproxy/ssl is in the correct state
Directory /etc/haproxy/ssl updated
2018-10-16 19:37:48,708 [salt.state       :1941][INFO    ][11597] Completed state [/etc/haproxy/ssl] at time 19:37:48.708338 duration_in_ms=1.527
2018-10-16 19:37:48,708 [salt.state       :1770][INFO    ][11597] Running state [/etc/haproxy/errors/429.http11] at time 19:37:48.708670
2018-10-16 19:37:48,708 [salt.state       :1803][INFO    ][11597] Executing state file.managed for [/etc/haproxy/errors/429.http11]
2018-10-16 19:37:48,730 [salt.state       :290 ][INFO    ][11597] File /etc/haproxy/errors/429.http11 is in the correct state
2018-10-16 19:37:48,730 [salt.state       :1941][INFO    ][11597] Completed state [/etc/haproxy/errors/429.http11] at time 19:37:48.730504 duration_in_ms=21.834
2018-10-16 19:37:48,730 [salt.state       :1770][INFO    ][11597] Running state [haproxy_status_packages] at time 19:37:48.730752
2018-10-16 19:37:48,731 [salt.state       :1803][INFO    ][11597] Executing state pkg.installed for [haproxy_status_packages]
2018-10-16 19:37:48,742 [salt.state       :290 ][INFO    ][11597] All specified packages are already installed
2018-10-16 19:37:48,742 [salt.state       :1941][INFO    ][11597] Completed state [haproxy_status_packages] at time 19:37:48.742466 duration_in_ms=11.714
2018-10-16 19:37:48,743 [salt.state       :1770][INFO    ][11597] Running state [/usr/bin/haproxy-status.sh] at time 19:37:48.743244
2018-10-16 19:37:48,743 [salt.state       :1803][INFO    ][11597] Executing state file.managed for [/usr/bin/haproxy-status.sh]
2018-10-16 19:37:48,782 [salt.state       :290 ][INFO    ][11597] File /usr/bin/haproxy-status.sh is in the correct state
2018-10-16 19:37:48,783 [salt.state       :1941][INFO    ][11597] Completed state [/usr/bin/haproxy-status.sh] at time 19:37:48.783378 duration_in_ms=40.133
2018-10-16 19:37:48,784 [salt.state       :1770][INFO    ][11597] Running state [net.ipv4.ip_nonlocal_bind] at time 19:37:48.784206
2018-10-16 19:37:48,784 [salt.state       :1803][INFO    ][11597] Executing state sysctl.present for [net.ipv4.ip_nonlocal_bind]
2018-10-16 19:37:48,803 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11597] Executing command 'sysctl -n net.ipv4.ip_nonlocal_bind' in directory '/root'
2018-10-16 19:37:48,818 [salt.state       :290 ][INFO    ][11597] Sysctl value net.ipv4.ip_nonlocal_bind = 1 is already set
2018-10-16 19:37:48,819 [salt.state       :1941][INFO    ][11597] Completed state [net.ipv4.ip_nonlocal_bind] at time 19:37:48.819462 duration_in_ms=35.255
2018-10-16 19:37:48,822 [salt.state       :1770][INFO    ][11597] Running state [haproxy] at time 19:37:48.822194
2018-10-16 19:37:48,823 [salt.state       :1803][INFO    ][11597] Executing state service.running for [haproxy]
2018-10-16 19:37:48,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11597] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-16 19:37:48,847 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11597] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 19:37:48,869 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11597] Executing command ['systemctl', 'is-enabled', 'haproxy.service'] in directory '/root'
2018-10-16 19:37:48,888 [salt.state       :290 ][INFO    ][11597] The service haproxy is already running
2018-10-16 19:37:48,890 [salt.state       :1941][INFO    ][11597] Completed state [haproxy] at time 19:37:48.889932 duration_in_ms=67.737
2018-10-16 19:37:48,892 [salt.minion      :1708][INFO    ][11597] Returning information for job: 20181016193736313846
2018-10-16 19:37:51,655 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command service.status with jid 20181016193751641419
2018-10-16 19:37:51,683 [salt.minion      :1431][INFO    ][11633] Starting a new job with PID 11633
2018-10-16 19:37:52,305 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11633] Executing command ['systemctl', 'status', 'haproxy.service', '-n', '0'] in directory '/root'
2018-10-16 19:37:52,331 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11633] Executing command ['systemctl', 'is-active', 'haproxy.service'] in directory '/root'
2018-10-16 19:37:52,350 [salt.minion      :1708][INFO    ][11633] Returning information for job: 20181016193751641419
2018-10-16 19:37:53,512 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command service.restart with jid 20181016193753494765
2018-10-16 19:37:53,540 [salt.minion      :1431][INFO    ][11641] Starting a new job with PID 11641
2018-10-16 19:37:54,159 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11641] Executing command ['systemctl', 'status', 'rsyslog.service', '-n', '0'] in directory '/root'
2018-10-16 19:37:54,215 [salt.loader.192.168.11.2.int.module.cmdmod:395 ][INFO    ][11641] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'rsyslog.service'] in directory '/root'
2018-10-16 19:37:54,266 [salt.minion      :1708][INFO    ][11641] Returning information for job: 20181016193753494765
2018-10-16 19:53:17,700 [salt.utils.schedule:1375][INFO    ][2953] Running scheduled job: __mine_interval
2018-10-16 20:02:59,221 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016200259209883
2018-10-16 20:02:59,247 [salt.minion      :1431][INFO    ][11754] Starting a new job with PID 11754
2018-10-16 20:03:00,393 [salt.state       :905 ][INFO    ][11754] Loading fresh modules for state activity
2018-10-16 20:03:00,470 [salt.fileclient  :1215][INFO    ][11754] Fetching file from saltenv 'base', ** done ** 'redis/init.sls'
2018-10-16 20:03:00,510 [salt.fileclient  :1215][INFO    ][11754] Fetching file from saltenv 'base', ** done ** 'redis/server.sls'
2018-10-16 20:03:00,545 [salt.fileclient  :1215][INFO    ][11754] Fetching file from saltenv 'base', ** done ** 'redis/map.jinja'
2018-10-16 20:03:00,597 [salt.fileclient  :1215][INFO    ][11754] Fetching file from saltenv 'base', ** done ** 'redis/cluster.sls'
2018-10-16 20:03:01,678 [salt.state       :1770][INFO    ][11754] Running state [redis-server] at time 20:03:01.678363
2018-10-16 20:03:01,678 [salt.state       :1803][INFO    ][11754] Executing state pkg.installed for [redis-server]
2018-10-16 20:03:01,680 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:03:02,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['apt-cache', '-q', 'policy', 'redis-server'] in directory '/root'
2018-10-16 20:03:02,455 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 20:03:04,275 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200304257369
2018-10-16 20:03:04,298 [salt.minion      :1431][INFO    ][12110] Starting a new job with PID 12110
2018-10-16 20:03:04,321 [salt.minion      :1708][INFO    ][12110] Returning information for job: 20181016200304257369
2018-10-16 20:03:07,824 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:03:07,868 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-server'] in directory '/root'
2018-10-16 20:03:12,904 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:03:12,964 [salt.state       :290 ][INFO    ][11754] Made the following changes:
'redis-server' changed from 'absent' to '2:3.0.6-1'
'redis-tools' changed from 'absent' to '2:3.0.6-1'
'libjemalloc1' changed from 'absent' to '3.6.0-9ubuntu1'

2018-10-16 20:03:12,993 [salt.state       :905 ][INFO    ][11754] Loading fresh modules for state activity
2018-10-16 20:03:13,050 [salt.state       :1941][INFO    ][11754] Completed state [redis-server] at time 20:03:13.050007 duration_in_ms=11371.643
2018-10-16 20:03:13,062 [salt.state       :1770][INFO    ][11754] Running state [vm.overcommit_memory] at time 20:03:13.061977
2018-10-16 20:03:13,062 [salt.state       :1803][INFO    ][11754] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-16 20:03:13,066 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command 'sysctl -w vm.overcommit_memory="1"' in directory '/root'
2018-10-16 20:03:13,083 [salt.state       :290 ][INFO    ][11754] {'vm.overcommit_memory': 1}
2018-10-16 20:03:13,084 [salt.state       :1941][INFO    ][11754] Completed state [vm.overcommit_memory] at time 20:03:13.083964 duration_in_ms=21.987
2018-10-16 20:03:13,089 [salt.state       :1770][INFO    ][11754] Running state [/etc/redis/redis.conf] at time 20:03:13.089793
2018-10-16 20:03:13,090 [salt.state       :1803][INFO    ][11754] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-16 20:03:13,133 [salt.fileclient  :1215][INFO    ][11754] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/redis.conf'
2018-10-16 20:03:13,211 [salt.state       :290 ][INFO    ][11754] File changed:
--- 
+++ 
@@ -66,7 +66,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
@@ -92,7 +92,7 @@
 # On other kernels the period depends on the kernel configuration.
 #
 # A reasonable value for this option is 60 seconds.
-tcp-keepalive 0
+tcp-keepalive 60
 
 # Specify the server verbosity level.
 # This can be one of:
@@ -505,8 +505,7 @@
 # with the better durability guarantees.
 #
 # Please check http://redis.io/topics/persistence for more information.
-
-appendonly no
+appendonly yes
 
 # The name of the append only file (default: "appendonly.aof")
 
@@ -535,9 +534,7 @@
 #
 # If unsure, use "everysec".
 
-# appendfsync always
-appendfsync everysec
-# appendfsync no
+appendfsync no
 
 # When the AOF fsync policy is set to always or everysec, and a background
 # saving process (a background save or AOF log background rewriting) is

2018-10-16 20:03:13,211 [salt.state       :1941][INFO    ][11754] Completed state [/etc/redis/redis.conf] at time 20:03:13.211837 duration_in_ms=122.047
2018-10-16 20:03:13,827 [salt.state       :1770][INFO    ][11754] Running state [redis-server] at time 20:03:13.827748
2018-10-16 20:03:13,828 [salt.state       :1803][INFO    ][11754] Executing state service.running for [redis-server]
2018-10-16 20:03:13,829 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-16 20:03:13,859 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-16 20:03:13,889 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-16 20:03:13,925 [salt.state       :290 ][INFO    ][11754] The service redis-server is already running
2018-10-16 20:03:13,926 [salt.state       :1941][INFO    ][11754] Completed state [redis-server] at time 20:03:13.926433 duration_in_ms=98.685
2018-10-16 20:03:13,928 [salt.state       :1770][INFO    ][11754] Running state [redis-server] at time 20:03:13.928122
2018-10-16 20:03:13,929 [salt.state       :1803][INFO    ][11754] Executing state service.mod_watch for [redis-server]
2018-10-16 20:03:13,930 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-16 20:03:13,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-server.service'] in directory '/root'
2018-10-16 20:03:14,266 [salt.state       :290 ][INFO    ][11754] {'redis-server': True}
2018-10-16 20:03:14,267 [salt.state       :1941][INFO    ][11754] Completed state [redis-server] at time 20:03:14.267585 duration_in_ms=339.462
2018-10-16 20:03:14,273 [salt.state       :1770][INFO    ][11754] Running state [redis-sentinel] at time 20:03:14.273535
2018-10-16 20:03:14,273 [salt.state       :1803][INFO    ][11754] Executing state pkg.installed for [redis-sentinel]
2018-10-16 20:03:14,460 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200314444601
2018-10-16 20:03:14,482 [salt.minion      :1431][INFO    ][12696] Starting a new job with PID 12696
2018-10-16 20:03:14,503 [salt.minion      :1708][INFO    ][12696] Returning information for job: 20181016200314444601
2018-10-16 20:03:14,623 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:03:14,663 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'redis-sentinel'] in directory '/root'
2018-10-16 20:03:18,791 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:03:18,849 [salt.state       :290 ][INFO    ][11754] Made the following changes:
'redis-sentinel' changed from 'absent' to '2:3.0.6-1'

2018-10-16 20:03:18,875 [salt.state       :905 ][INFO    ][11754] Loading fresh modules for state activity
2018-10-16 20:03:18,935 [salt.state       :1941][INFO    ][11754] Completed state [redis-sentinel] at time 20:03:18.935607 duration_in_ms=4662.071
2018-10-16 20:03:19,572 [salt.state       :1770][INFO    ][11754] Running state [/etc/redis/sentinel.conf] at time 20:03:19.572482
2018-10-16 20:03:19,573 [salt.state       :1803][INFO    ][11754] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-16 20:03:19,599 [salt.fileclient  :1215][INFO    ][11754] Fetching file from saltenv 'base', ** done ** 'redis/files/3.0/sentinel.conf'
2018-10-16 20:03:19,647 [salt.state       :290 ][INFO    ][11754] File changed:
--- 
+++ 
@@ -21,7 +21,7 @@
 # Examples:
 #
 # bind 192.168.1.100 10.0.0.1
-bind 127.0.0.1
+bind 192.168.10.32
 
 # port <sentinel-port>
 # The port that this sentinel instance will run on
@@ -73,7 +73,7 @@
 #
 # Note: master name should not include special characters or spaces.
 # The valid charset is A-z 0-9 and the three characters ".-_".
-sentinel monitor mymaster 127.0.0.1 6379 2
+sentinel monitor master_1 192.168.10.32 6379 2
 
 # sentinel auth-pass <master-name> <password>
 #
@@ -102,7 +102,7 @@
 # Down).
 #
 # Default is 30 seconds.
-sentinel down-after-milliseconds mymaster 30000
+sentinel down-after-milliseconds master_1 30000
 
 # sentinel parallel-syncs <master-name> <numslaves>
 #
@@ -110,7 +110,7 @@
 # during the failover. Use a low number if you use the slaves to serve query
 # to avoid that all the slaves will be unreachable at about the same
 # time while performing the synchronization with the master.
-sentinel parallel-syncs mymaster 1
+sentinel parallel-syncs master_1 1
 
 # sentinel failover-timeout <master-name> <milliseconds>
 #
@@ -135,7 +135,7 @@
 #   the exact parallel-syncs progression as specified.
 #
 # Default is 3 minutes.
-sentinel failover-timeout mymaster 180000
+sentinel failover-timeout master_1 180000
 
 # SCRIPTS EXECUTION
 #

2018-10-16 20:03:19,648 [salt.state       :1941][INFO    ][11754] Completed state [/etc/redis/sentinel.conf] at time 20:03:19.648039 duration_in_ms=75.558
2018-10-16 20:03:19,648 [salt.state       :1770][INFO    ][11754] Running state [redis-sentinel] at time 20:03:19.648469
2018-10-16 20:03:19,648 [salt.state       :1803][INFO    ][11754] Executing state service.running for [redis-sentinel]
2018-10-16 20:03:19,649 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-16 20:03:19,672 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-16 20:03:19,691 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-16 20:03:19,708 [salt.state       :290 ][INFO    ][11754] The service redis-sentinel is already running
2018-10-16 20:03:19,709 [salt.state       :1941][INFO    ][11754] Completed state [redis-sentinel] at time 20:03:19.709294 duration_in_ms=60.824
2018-10-16 20:03:19,709 [salt.state       :1770][INFO    ][11754] Running state [redis-sentinel] at time 20:03:19.709604
2018-10-16 20:03:19,710 [salt.state       :1803][INFO    ][11754] Executing state service.mod_watch for [redis-sentinel]
2018-10-16 20:03:19,712 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-16 20:03:19,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][11754] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'redis-sentinel.service'] in directory '/root'
2018-10-16 20:03:20,033 [salt.state       :290 ][INFO    ][11754] {'redis-sentinel': True}
2018-10-16 20:03:20,038 [salt.state       :1941][INFO    ][11754] Completed state [redis-sentinel] at time 20:03:20.038250 duration_in_ms=328.644
2018-10-16 20:03:20,043 [salt.minion      :1708][INFO    ][11754] Returning information for job: 20181016200259209883
2018-10-16 20:03:20,611 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016200320599999
2018-10-16 20:03:20,635 [salt.minion      :1431][INFO    ][13057] Starting a new job with PID 13057
2018-10-16 20:03:25,706 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200325693567
2018-10-16 20:03:25,734 [salt.minion      :1431][INFO    ][13062] Starting a new job with PID 13062
2018-10-16 20:03:25,759 [salt.minion      :1708][INFO    ][13062] Returning information for job: 20181016200325693567
2018-10-16 20:03:29,833 [salt.state       :905 ][INFO    ][13057] Loading fresh modules for state activity
2018-10-16 20:03:31,011 [salt.state       :1770][INFO    ][13057] Running state [redis-server] at time 20:03:31.010919
2018-10-16 20:03:31,012 [salt.state       :1803][INFO    ][13057] Executing state pkg.installed for [redis-server]
2018-10-16 20:03:31,013 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:03:31,591 [salt.state       :290 ][INFO    ][13057] All specified packages are already installed
2018-10-16 20:03:31,592 [salt.state       :1941][INFO    ][13057] Completed state [redis-server] at time 20:03:31.592175 duration_in_ms=581.257
2018-10-16 20:03:31,594 [salt.state       :1770][INFO    ][13057] Running state [vm.overcommit_memory] at time 20:03:31.593962
2018-10-16 20:03:31,594 [salt.state       :1803][INFO    ][13057] Executing state sysctl.present for [vm.overcommit_memory]
2018-10-16 20:03:31,618 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command 'sysctl -n vm.overcommit_memory' in directory '/root'
2018-10-16 20:03:31,639 [salt.state       :290 ][INFO    ][13057] Sysctl value vm.overcommit_memory = 1 is already set
2018-10-16 20:03:31,640 [salt.state       :1941][INFO    ][13057] Completed state [vm.overcommit_memory] at time 20:03:31.640637 duration_in_ms=46.675
2018-10-16 20:03:31,651 [salt.state       :1770][INFO    ][13057] Running state [/etc/redis/redis.conf] at time 20:03:31.651721
2018-10-16 20:03:31,653 [salt.state       :1803][INFO    ][13057] Executing state file.managed for [/etc/redis/redis.conf]
2018-10-16 20:03:31,752 [salt.state       :290 ][INFO    ][13057] File /etc/redis/redis.conf is in the correct state
2018-10-16 20:03:31,753 [salt.state       :1941][INFO    ][13057] Completed state [/etc/redis/redis.conf] at time 20:03:31.753027 duration_in_ms=101.307
2018-10-16 20:03:31,754 [salt.state       :1770][INFO    ][13057] Running state [redis-server] at time 20:03:31.754367
2018-10-16 20:03:31,754 [salt.state       :1803][INFO    ][13057] Executing state service.running for [redis-server]
2018-10-16 20:03:31,755 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command ['systemctl', 'status', 'redis-server.service', '-n', '0'] in directory '/root'
2018-10-16 20:03:31,784 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command ['systemctl', 'is-active', 'redis-server.service'] in directory '/root'
2018-10-16 20:03:31,812 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command ['systemctl', 'is-enabled', 'redis-server.service'] in directory '/root'
2018-10-16 20:03:31,841 [salt.state       :290 ][INFO    ][13057] The service redis-server is already running
2018-10-16 20:03:31,842 [salt.state       :1941][INFO    ][13057] Completed state [redis-server] at time 20:03:31.842164 duration_in_ms=87.795
2018-10-16 20:03:31,843 [salt.state       :1770][INFO    ][13057] Running state [redis-sentinel] at time 20:03:31.843502
2018-10-16 20:03:31,844 [salt.state       :1803][INFO    ][13057] Executing state pkg.installed for [redis-sentinel]
2018-10-16 20:03:31,859 [salt.state       :290 ][INFO    ][13057] All specified packages are already installed
2018-10-16 20:03:31,860 [salt.state       :1941][INFO    ][13057] Completed state [redis-sentinel] at time 20:03:31.860361 duration_in_ms=16.859
2018-10-16 20:03:31,861 [salt.state       :1770][INFO    ][13057] Running state [/etc/redis/sentinel.conf] at time 20:03:31.861528
2018-10-16 20:03:31,861 [salt.state       :1803][INFO    ][13057] Executing state file.managed for [/etc/redis/sentinel.conf]
2018-10-16 20:03:31,933 [salt.state       :290 ][INFO    ][13057] File /etc/redis/sentinel.conf is in the correct state
2018-10-16 20:03:31,933 [salt.state       :1941][INFO    ][13057] Completed state [/etc/redis/sentinel.conf] at time 20:03:31.933700 duration_in_ms=72.172
2018-10-16 20:03:31,934 [salt.state       :1770][INFO    ][13057] Running state [redis-sentinel] at time 20:03:31.934080
2018-10-16 20:03:31,934 [salt.state       :1803][INFO    ][13057] Executing state service.running for [redis-sentinel]
2018-10-16 20:03:31,935 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command ['systemctl', 'status', 'redis-sentinel.service', '-n', '0'] in directory '/root'
2018-10-16 20:03:31,961 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command ['systemctl', 'is-active', 'redis-sentinel.service'] in directory '/root'
2018-10-16 20:03:31,992 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13057] Executing command ['systemctl', 'is-enabled', 'redis-sentinel.service'] in directory '/root'
2018-10-16 20:03:32,018 [salt.state       :290 ][INFO    ][13057] The service redis-sentinel is already running
2018-10-16 20:03:32,020 [salt.state       :1941][INFO    ][13057] Completed state [redis-sentinel] at time 20:03:32.020589 duration_in_ms=86.508
2018-10-16 20:03:32,022 [salt.minion      :1708][INFO    ][13057] Returning information for job: 20181016200320599999
2018-10-16 20:03:49,416 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command test.ping with jid 20181016200349404653
2018-10-16 20:03:49,443 [salt.minion      :1431][INFO    ][13099] Starting a new job with PID 13099
2018-10-16 20:03:49,477 [salt.minion      :1708][INFO    ][13099] Returning information for job: 20181016200349404653
2018-10-16 20:05:24,410 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016200524396668
2018-10-16 20:05:24,440 [salt.minion      :1431][INFO    ][13104] Starting a new job with PID 13104
2018-10-16 20:05:29,531 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200529517846
2018-10-16 20:05:29,554 [salt.minion      :1431][INFO    ][13109] Starting a new job with PID 13109
2018-10-16 20:05:29,581 [salt.minion      :1708][INFO    ][13109] Returning information for job: 20181016200529517846
2018-10-16 20:05:32,860 [salt.state       :905 ][INFO    ][13104] Loading fresh modules for state activity
2018-10-16 20:05:32,937 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'gnocchi/init.sls'
2018-10-16 20:05:32,980 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'gnocchi/server.sls'
2018-10-16 20:05:33,087 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/init.sls'
2018-10-16 20:05:33,127 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/server/init.sls'
2018-10-16 20:05:33,165 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/server/service/init.sls'
2018-10-16 20:05:33,269 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/server/service/modules.sls'
2018-10-16 20:05:33,366 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/server/service/mpm.sls'
2018-10-16 20:05:33,477 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/server/site.sls'
2018-10-16 20:05:33,663 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/server/users.sls'
2018-10-16 20:05:33,766 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/server/robots.sls'
2018-10-16 20:05:33,845 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'gnocchi/_common.sls'
2018-10-16 20:05:33,917 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'gnocchi/_ssl/mysql.sls'
2018-10-16 20:05:35,004 [salt.state       :1770][INFO    ][13104] Running state [apache2] at time 20:05:35.004826
2018-10-16 20:05:35,005 [salt.state       :1803][INFO    ][13104] Executing state pkg.installed for [apache2]
2018-10-16 20:05:35,006 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:05:35,602 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['apt-cache', '-q', 'policy', 'apache2'] in directory '/root'
2018-10-16 20:05:35,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 20:05:38,471 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:05:38,513 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'apache2'] in directory '/root'
2018-10-16 20:05:39,600 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200539583325
2018-10-16 20:05:39,626 [salt.minion      :1431][INFO    ][13525] Starting a new job with PID 13525
2018-10-16 20:05:39,656 [salt.minion      :1708][INFO    ][13525] Returning information for job: 20181016200539583325
2018-10-16 20:05:48,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:05:48,266 [salt.state       :290 ][INFO    ][13104] Made the following changes:
'apache2-data' changed from 'absent' to '2.4.18-2ubuntu3.9'
'libapr1' changed from 'absent' to '1.5.2-3'
'apache2-utils' changed from 'absent' to '2.4.18-2ubuntu3.9'
'httpd' changed from 'absent' to '1'
'apache2-api-20120211' changed from 'absent' to '1'
'libaprutil1' changed from 'absent' to '1.5.4-1build1'
'apache2' changed from 'absent' to '2.4.18-2ubuntu3.9'
'liblua5.1-0' changed from 'absent' to '5.1.5-8ubuntu1'
'libaprutil1-dbd-sqlite3' changed from 'absent' to '1.5.4-1build1'
'libaprutil1-ldap' changed from 'absent' to '1.5.4-1build1'
'apache2-bin' changed from 'absent' to '2.4.18-2ubuntu3.9'
'ssl-cert' changed from 'absent' to '1.0.37'
'httpd-cgi' changed from 'absent' to '1'

2018-10-16 20:05:48,295 [salt.state       :905 ][INFO    ][13104] Loading fresh modules for state activity
2018-10-16 20:05:48,346 [salt.state       :1941][INFO    ][13104] Completed state [apache2] at time 20:05:48.346265 duration_in_ms=13341.441
2018-10-16 20:05:48,353 [salt.state       :1770][INFO    ][13104] Running state [openssl] at time 20:05:48.353772
2018-10-16 20:05:48,354 [salt.state       :1803][INFO    ][13104] Executing state pkg.installed for [openssl]
2018-10-16 20:05:49,346 [salt.state       :290 ][INFO    ][13104] All specified packages are already installed
2018-10-16 20:05:49,347 [salt.state       :1941][INFO    ][13104] Completed state [openssl] at time 20:05:49.347392 duration_in_ms=993.619
2018-10-16 20:05:49,348 [salt.state       :1770][INFO    ][13104] Running state [a2enmod rewrite] at time 20:05:49.348869
2018-10-16 20:05:49,349 [salt.state       :1803][INFO    ][13104] Executing state cmd.run for [a2enmod rewrite]
2018-10-16 20:05:49,350 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command 'a2enmod rewrite' in directory '/root'
2018-10-16 20:05:49,436 [salt.state       :290 ][INFO    ][13104] {'pid': 14639, 'retcode': 0, 'stderr': '', 'stdout': 'Enabling module rewrite.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-16 20:05:49,438 [salt.state       :1941][INFO    ][13104] Completed state [a2enmod rewrite] at time 20:05:49.438563 duration_in_ms=89.693
2018-10-16 20:05:49,440 [salt.state       :1770][INFO    ][13104] Running state [libapache2-mod-wsgi] at time 20:05:49.440079
2018-10-16 20:05:49,440 [salt.state       :1803][INFO    ][13104] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-16 20:05:49,480 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:05:49,522 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'libapache2-mod-wsgi'] in directory '/root'
2018-10-16 20:05:49,782 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200549764111
2018-10-16 20:05:49,803 [salt.minion      :1431][INFO    ][14668] Starting a new job with PID 14668
2018-10-16 20:05:49,826 [salt.minion      :1708][INFO    ][14668] Returning information for job: 20181016200549764111
2018-10-16 20:05:55,325 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:05:55,391 [salt.state       :290 ][INFO    ][13104] Made the following changes:
'libapache2-mod-wsgi' changed from 'absent' to '4.4.15-0.1.1~u16.04+mcp2'
'httpd-wsgi' changed from 'absent' to '1'
'libpython2.7' changed from 'absent' to '2.7.12-1ubuntu0~16.04.3'

2018-10-16 20:05:55,425 [salt.state       :905 ][INFO    ][13104] Loading fresh modules for state activity
2018-10-16 20:05:55,486 [salt.state       :1941][INFO    ][13104] Completed state [libapache2-mod-wsgi] at time 20:05:55.486571 duration_in_ms=6046.492
2018-10-16 20:05:55,491 [salt.state       :1770][INFO    ][13104] Running state [a2enmod wsgi] at time 20:05:55.491478
2018-10-16 20:05:55,491 [salt.state       :1803][INFO    ][13104] Executing state cmd.run for [a2enmod wsgi]
2018-10-16 20:05:55,492 [salt.state       :290 ][INFO    ][13104] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-16 20:05:55,492 [salt.state       :1941][INFO    ][13104] Completed state [a2enmod wsgi] at time 20:05:55.492471 duration_in_ms=0.994
2018-10-16 20:05:55,499 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 20:05:55.499920
2018-10-16 20:05:55,500 [salt.state       :1803][INFO    ][13104] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-16 20:05:55,548 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/mpm/mpm_prefork.conf'
2018-10-16 20:05:55,627 [salt.state       :290 ][INFO    ][13104] File changed:
--- 
+++ 
@@ -6,11 +6,12 @@
 # MaxConnectionsPerChild: maximum number of requests a server process serves
 
 <IfModule mpm_prefork_module>
-	StartServers			 5
-	MinSpareServers		  5
-	MaxSpareServers		 10
-	MaxRequestWorkers	  150
-	MaxConnectionsPerChild   0
+    StartServers            5
+    MinSpareServers         5
+    MaxSpareServers         10
+    MaxRequestWorkers       150
+    MaxConnectionsPerChild  0
+    ServerLimit             150
 </IfModule>
 
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+# vim: syntax=apache ts=4 sw=4 sts=4 sr et

2018-10-16 20:05:55,627 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 20:05:55.627937 duration_in_ms=128.017
2018-10-16 20:05:55,628 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 20:05:55.628243
2018-10-16 20:05:55,628 [salt.state       :1803][INFO    ][13104] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-16 20:05:55,629 [salt.state       :290 ][INFO    ][13104] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-16 20:05:55,629 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 20:05:55.629701 duration_in_ms=1.458
2018-10-16 20:05:55,631 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 20:05:55.631124
2018-10-16 20:05:55,631 [salt.state       :1803][INFO    ][13104] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-16 20:05:55,631 [salt.state       :290 ][INFO    ][13104] {'removed': '/etc/apache2/mods-enabled/mpm_event.load'}
2018-10-16 20:05:55,631 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 20:05:55.631917 duration_in_ms=0.793
2018-10-16 20:05:55,632 [salt.state       :1770][INFO    ][13104] Running state [a2enmod mpm_prefork] at time 20:05:55.632730
2018-10-16 20:05:55,633 [salt.state       :1803][INFO    ][13104] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-16 20:05:55,637 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command 'a2enmod mpm_prefork' in directory '/root'
2018-10-16 20:05:55,719 [salt.state       :290 ][INFO    ][13104] {'pid': 14975, 'retcode': 0, 'stderr': '', 'stdout': 'Considering conflict mpm_event for mpm_prefork:\nConsidering conflict mpm_worker for mpm_prefork:\nEnabling module mpm_prefork.\nTo activate the new configuration, you need to run:\n  service apache2 restart'}
2018-10-16 20:05:55,719 [salt.state       :1941][INFO    ][13104] Completed state [a2enmod mpm_prefork] at time 20:05:55.719708 duration_in_ms=86.978
2018-10-16 20:05:55,720 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 20:05:55.720319
2018-10-16 20:05:55,720 [salt.state       :1803][INFO    ][13104] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-16 20:05:55,721 [salt.state       :290 ][INFO    ][13104] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-16 20:05:55,721 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 20:05:55.721568 duration_in_ms=1.249
2018-10-16 20:05:55,721 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 20:05:55.721859
2018-10-16 20:05:55,722 [salt.state       :1803][INFO    ][13104] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-16 20:05:55,723 [salt.state       :290 ][INFO    ][13104] {'removed': '/etc/apache2/mods-enabled/mpm_event.conf'}
2018-10-16 20:05:55,724 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 20:05:55.724036 duration_in_ms=2.177
2018-10-16 20:05:55,726 [salt.state       :1770][INFO    ][13104] Running state [apache_server_service_task] at time 20:05:55.726955
2018-10-16 20:05:55,727 [salt.state       :1803][INFO    ][13104] Executing state test.show_notification for [apache_server_service_task]
2018-10-16 20:05:55,728 [salt.state       :290 ][INFO    ][13104] Running apache.server.service
2018-10-16 20:05:55,728 [salt.state       :1941][INFO    ][13104] Completed state [apache_server_service_task] at time 20:05:55.728877 duration_in_ms=1.922
2018-10-16 20:05:55,729 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/ports.conf] at time 20:05:55.729608
2018-10-16 20:05:55,729 [salt.state       :1803][INFO    ][13104] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-16 20:05:55,764 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/ports.conf'
2018-10-16 20:05:55,842 [salt.state       :290 ][INFO    ][13104] File changed:
--- 
+++ 
@@ -2,14 +2,4 @@
 # have to change the VirtualHost statement in
 # /etc/apache2/sites-enabled/000-default.conf
 
-Listen 80
-
-<IfModule ssl_module>
-	Listen 443
-</IfModule>
-
-<IfModule mod_gnutls.c>
-	Listen 443
-</IfModule>
-
 # vim: syntax=apache ts=4 sw=4 sts=4 sr noet

2018-10-16 20:05:55,842 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/ports.conf] at time 20:05:55.842640 duration_in_ms=113.031
2018-10-16 20:05:55,843 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/conf-available/security.conf] at time 20:05:55.843808
2018-10-16 20:05:55,844 [salt.state       :1803][INFO    ][13104] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-16 20:05:55,869 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/security.conf'
2018-10-16 20:05:55,938 [salt.state       :290 ][INFO    ][13104] File changed:
--- 
+++ 
@@ -1,73 +1,14 @@
-#
-# Disable access to the entire file system except for the directories that
-# are explicitly allowed later.
-#
-# This currently breaks the configurations that come with some web application
-# Debian packages.
-#
-#<Directory />
-#   AllowOverride None
-#   Require all denied
-#</Directory>
+ServerSignature Off
+TraceEnable Off
+ServerTokens Prod
+<DirectoryMatch "/\.svn">
+    Require all denied
+</DirectoryMatch>
 
+<DirectoryMatch "/\.git">
+    Require all denied
+</DirectoryMatch>
 
-# Changing the following options will not really affect the security of the
-# server, but might make attacks slightly more difficult in some cases.
-
-#
-# ServerTokens
-# This directive configures what you return as the Server HTTP response
-# Header. The default is 'Full' which sends information about the OS-Type
-# and compiled in modules.
-# Set to one of:  Full | OS | Minimal | Minor | Major | Prod
-# where Full conveys the most information, and Prod the least.
-#ServerTokens Minimal
-ServerTokens OS
-#ServerTokens Full
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (internal error documents, FTP directory
-# listings, mod_status and mod_info output etc., but not CGI generated
-# documents or custom error documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#ServerSignature Off
-ServerSignature On
-
-#
-# Allow TRACE method
-#
-# Set to "extended" to also reflect the request body (only for testing and
-# diagnostic purposes).
-#
-# Set to one of:  On | Off | extended
-TraceEnable Off
-#TraceEnable On
-
-#
-# Forbid access to version control directories
-#
-# If you use version control systems in your document root, you should
-# probably deny access to their directories. For example, for subversion:
-#
-#<DirectoryMatch "/\.svn">
-#   Require all denied
-#</DirectoryMatch>
-
-#
-# Setting this header will prevent MSIE from interpreting files as something
-# else than declared by the content type in the HTTP headers.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Content-Type-Options: "nosniff"
-
-#
-# Setting this header will prevent other sites from embedding pages from this
-# site as frames. This defends against clickjacking attacks.
-# Requires mod_headers to be enabled.
-#
-#Header set X-Frame-Options: "sameorigin"
-
-
-# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
+<DirectoryMatch "/\.hg">
+    Require all denied
+</DirectoryMatch>

2018-10-16 20:05:55,939 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/conf-available/security.conf] at time 20:05:55.939079 duration_in_ms=95.271
2018-10-16 20:05:56,658 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 20:05:56.658027
2018-10-16 20:05:56,658 [salt.state       :1803][INFO    ][13104] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-16 20:05:56,659 [salt.state       :290 ][INFO    ][13104] {'removed': '/etc/apache2/sites-enabled/000-default.conf'}
2018-10-16 20:05:56,659 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 20:05:56.659833 duration_in_ms=1.807
2018-10-16 20:05:56,660 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 20:05:56.660537
2018-10-16 20:05:56,660 [salt.state       :1803][INFO    ][13104] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-16 20:05:56,688 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/wsgi.conf'
2018-10-16 20:05:56,728 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/_name.conf'
2018-10-16 20:05:56,821 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/_wsgi.conf'
2018-10-16 20:05:56,852 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/_ssl.conf'
2018-10-16 20:05:56,957 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/_core.conf'
2018-10-16 20:05:56,983 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/_log.conf'
2018-10-16 20:05:57,013 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'apache/files/_limits.conf'
2018-10-16 20:05:57,033 [salt.state       :290 ][INFO    ][13104] File changed:
New file
2018-10-16 20:05:57,034 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 20:05:57.034147 duration_in_ms=373.608
2018-10-16 20:05:57,038 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 20:05:57.037918
2018-10-16 20:05:57,038 [salt.state       :1803][INFO    ][13104] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-16 20:05:57,332 [salt.state       :290 ][INFO    ][13104] File changed:
New file
2018-10-16 20:05:57,333 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 20:05:57.333472 duration_in_ms=295.554
2018-10-16 20:05:57,335 [salt.state       :1770][INFO    ][13104] Running state [apache2] at time 20:05:57.335827
2018-10-16 20:05:57,336 [salt.state       :1803][INFO    ][13104] Executing state service.running for [apache2]
2018-10-16 20:05:57,336 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-16 20:05:57,373 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:05:57,401 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 20:05:57,439 [salt.state       :290 ][INFO    ][13104] The service apache2 is already running
2018-10-16 20:05:57,440 [salt.state       :1941][INFO    ][13104] Completed state [apache2] at time 20:05:57.440763 duration_in_ms=104.935
2018-10-16 20:05:57,443 [salt.state       :1770][INFO    ][13104] Running state [apache2] at time 20:05:57.443020
2018-10-16 20:05:57,444 [salt.state       :1803][INFO    ][13104] Executing state service.mod_watch for [apache2]
2018-10-16 20:05:57,445 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:05:57,473 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'systemctl', 'reload', 'apache2.service'] in directory '/root'
2018-10-16 20:05:57,699 [salt.state       :290 ][INFO    ][13104] {'apache2': True}
2018-10-16 20:05:57,701 [salt.state       :1941][INFO    ][13104] Completed state [apache2] at time 20:05:57.700873 duration_in_ms=257.852
2018-10-16 20:05:57,704 [salt.state       :1770][INFO    ][13104] Running state [/etc/apache2/conf-enabled/security.conf] at time 20:05:57.704577
2018-10-16 20:05:57,705 [salt.state       :1803][INFO    ][13104] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-16 20:05:57,714 [salt.state       :290 ][INFO    ][13104] {'new': '/etc/apache2/conf-enabled/security.conf'}
2018-10-16 20:05:57,715 [salt.state       :1941][INFO    ][13104] Completed state [/etc/apache2/conf-enabled/security.conf] at time 20:05:57.715150 duration_in_ms=10.574
2018-10-16 20:05:57,718 [salt.state       :1770][INFO    ][13104] Running state [gnocchi-common] at time 20:05:57.718599
2018-10-16 20:05:57,720 [salt.state       :1803][INFO    ][13104] Executing state pkg.installed for [gnocchi-common]
2018-10-16 20:05:58,070 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:05:58,111 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-common'] in directory '/root'
2018-10-16 20:05:59,929 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200559917675
2018-10-16 20:05:59,949 [salt.minion      :1431][INFO    ][15126] Starting a new job with PID 15126
2018-10-16 20:06:00,020 [salt.minion      :1708][INFO    ][15126] Returning information for job: 20181016200559917675
2018-10-16 20:06:10,106 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200610091416
2018-10-16 20:06:10,136 [salt.minion      :1431][INFO    ][16041] Starting a new job with PID 16041
2018-10-16 20:06:10,218 [salt.minion      :1708][INFO    ][16041] Returning information for job: 20181016200610091416
2018-10-16 20:06:20,129 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200620110767
2018-10-16 20:06:20,152 [salt.minion      :1431][INFO    ][17114] Starting a new job with PID 17114
2018-10-16 20:06:20,224 [salt.minion      :1708][INFO    ][17114] Returning information for job: 20181016200620110767
2018-10-16 20:06:30,316 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200630301611
2018-10-16 20:06:30,336 [salt.minion      :1431][INFO    ][17629] Starting a new job with PID 17629
2018-10-16 20:06:30,422 [salt.minion      :1708][INFO    ][17629] Returning information for job: 20181016200630301611
2018-10-16 20:06:40,342 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200640324085
2018-10-16 20:06:40,369 [salt.minion      :1431][INFO    ][18037] Starting a new job with PID 18037
2018-10-16 20:06:40,451 [salt.minion      :1708][INFO    ][18037] Returning information for job: 20181016200640324085
2018-10-16 20:06:43,727 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:06:43,798 [salt.state       :290 ][INFO    ][13104] Made the following changes:
'python-routes' changed from 'absent' to '2.4.1-1~u16.04+mcp2'
'python-oslosphinx-common' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-kombu' changed from 'absent' to '4.1.0-1~u16.04+mcp1'
'python-oslo.concurrency' changed from 'absent' to '3.25.0-1.0~u16.04+mcp2'
'python-sqlparse' changed from 'absent' to '0.2.2-1~u16.04+mcp1'
'python-monotonic' changed from 'absent' to '0.6-2'
'python-cotyledon' changed from 'absent' to '1.7.1-1~u16.04+mcp'
'python-daiquiri' changed from 'absent' to '1.3.0-3.0~u16.04+mcp1'
'liblapack3' changed from 'absent' to '3.6.0-2ubuntu2'
'libtiff5' changed from 'absent' to '4.0.6-1ubuntu0.4'
'python-secretstorage' changed from 'absent' to '2.1.3-1'
'python2.7-numpy' changed from 'absent' to '1'
'python-formencode' changed from 'absent' to '1.3.0-0ubuntu5'
'python-pygments' changed from 'absent' to '2.2.0+dfsg-1~u16.04+mcp2'
'python-migrate' changed from 'absent' to '0.11.0-1~u16.04+mcp2'
'python-cachetools' changed from 'absent' to '2.0.0-2.0~u16.04+mcp1'
'libquadmath0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-egenix-mxtools' changed from 'absent' to '3.2.9-1'
'python-blinker' changed from 'absent' to '1.3.dfsg2-1build1'
'python-roman' changed from 'absent' to '2.0.0-2'
'python-pastescript' changed from 'absent' to '1.7.5-3build1'
'python-bs4' changed from 'absent' to '4.6.0-1~u16.04+mcp1'
'liblapack.so.3' changed from 'absent' to '1'
'python-tenacity' changed from 'absent' to '4.8.0-1.0~u16.04+mcp1'
'python-setuptools' changed from 'absent' to '33.1.1-1~u16.04+mcp'
'docutils-doc' changed from 'absent' to '0.12+dfsg-1'
'python-dbus' changed from 'absent' to '1.2.0-3'
'python-fixtures' changed from 'absent' to '3.0.0-1.1~u16.04+mcp2'
'python-lz4' changed from 'absent' to '0.10.1+dfsg1-0.2~u16.04+mcp2'
'python-testtools' changed from 'absent' to '2.3.0-1.0~u16.04+mcp1'
'python-egenix-mxdatetime' changed from 'absent' to '3.2.9-1'
'python-anyjson' changed from 'absent' to '0.3.3-1build1'
'python-jwt' changed from 'absent' to '1.3.0-1ubuntu0.1'
'python-prettytable' changed from 'absent' to '0.7.2-3'
'python-pymemcache' changed from 'absent' to '1.3.2-2ubuntu1'
'libblas3' changed from 'absent' to '3.6.0-2ubuntu2'
'python-dnspython' changed from 'absent' to '1.14.0-3.1~u16.04+mcp2'
'python-babel' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-sqlalchemy-utils' changed from 'absent' to '0.32.21-1~cloud0'
'python-pil' changed from 'absent' to '3.1.2-0ubuntu1.1'
'docutils-common' changed from 'absent' to '0.12+dfsg-1'
'python2.7-lxml' changed from 'absent' to '1'
'python-oslo.db' changed from 'absent' to '4.33.1-1.0~u16.04+mcp4'
'python2.7-sqlalchemy-ext' changed from 'absent' to '1'
'python2.7-netifaces' changed from 'absent' to '1'
'python-tz' changed from 'absent' to '2014.10~dfsg1-0ubuntu2'
'python2.7-arrow' changed from 'absent' to '1'
'python-psycopg2' changed from 'absent' to '2.7.4-1.0~u16.04+mcp1'
'python-funcsigs' changed from 'absent' to '1.0.2-4.0~u16.04+mcp1'
'python-scgi' changed from 'absent' to '1.13-1.1build1'
'python2.7-pil' changed from 'absent' to '1'
'python-zake' changed from 'absent' to '0.1.6-1'
'python-repoze.lru' changed from 'absent' to '0.6-6'
'python-posix-ipc' changed from 'absent' to '0.9.8-2build2'
'formencode-i18n' changed from 'absent' to '1.3.0-0ubuntu5'
'python2.7-testtools' changed from 'absent' to '1'
'docutils' changed from 'absent' to '1'
'python2.7-dbus' changed from 'absent' to '1'
'python-oslo.middleware' changed from 'absent' to '3.34.0-1.0~u16.04+mcp6'
'python-pillow' changed from 'absent' to '1'
'libpaperg' changed from 'absent' to '1'
'python-pytimeparse' changed from 'absent' to '1.1.5-1'
'dbconfig-common' changed from 'absent' to '2.0.4ubuntu1'
'python-numpy-dev' changed from 'absent' to '1'
'liblcms2-2' changed from 'absent' to '2.6-3ubuntu2.1'
'python-oslo.context' changed from 'absent' to '1:2.20.0-1.0~u16.04+mcp6'
'python-oslo.cache' changed from 'absent' to '1.28.0-1.0~u16.04+mcp9'
'python2.7-pyinotify' changed from 'absent' to '1'
'python-webob' changed from 'absent' to '1:1.7.2-1~u16.04+mcp2'
'python-pyparsing' changed from 'absent' to '2.1.10+dfsg1-1.1~u16.04+mcp2'
'python-babel-localedata' changed from 'absent' to '2.3.4+dfsg.1-2.1~u16.04+mcp2'
'python-positional' changed from 'absent' to '1.1.1-3.1~u16.04+mcp2'
'python-distribute' changed from 'absent' to '1'
'python-trollius' changed from 'absent' to '2.1~b1-3'
'python-oslo-log' changed from 'absent' to '1'
'python-iso8601' changed from 'absent' to '0.1.11-1'
'python-pycadf' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-jsonpatch' changed from 'absent' to '1.21-1~u16.04+mcp1'
'alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'libwebpmux1' changed from 'absent' to '0.4.4-1'
'python-debtcollector' changed from 'absent' to '1.3.0-2'
'python-oslo.policy' changed from 'absent' to '1.33.2-1.0~u16.04+mcp3'
'python-stevedore' changed from 'absent' to '1:1.25.0-1~u16.04+mcp2'
'python-paste' changed from 'absent' to '2.0.3+dfsg-4.1~u16.04+mcp1'
'python-oauthlib' changed from 'absent' to '1.0.3-1'
'python-ujson' changed from 'absent' to '1.35-2~cloud0'
'python-lxml' changed from 'absent' to '3.5.0-1build1'
'python-oslo.config' changed from 'absent' to '1:5.2.0-1.0~u16.04+mcp7'
'python-futurist' changed from 'absent' to '1.6.0-1.0~u16.04+mcp1'
'python-f2py' changed from 'absent' to '1'
'libpaper1' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python-fasteners' changed from 'absent' to '0.12.0-2ubuntu1'
'python2.7-gi' changed from 'absent' to '1'
'python-linecache2' changed from 'absent' to '1.0.0-2'
'python-mimeparse' changed from 'absent' to '0.1.4-1build1'
'python-pastedeploy-tpl' changed from 'absent' to '1.5.2-1'
'python-arrow' changed from 'absent' to '0.7.0-1'
'python-oslo-db' changed from 'absent' to '1'
'libblas-common' changed from 'absent' to '3.6.0-2ubuntu2'
'python-werkzeug' changed from 'absent' to '0.10.4+dfsg1-1ubuntu1.1'
'libgfortran3' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gi' changed from 'absent' to '3.20.0-0ubuntu1'
'libpq5' changed from 'absent' to '9.5.14-0ubuntu0.16.04'
'pycadf-common' changed from 'absent' to '2.6.0-1~u16.04+mcp2'
'python-contextlib2' changed from 'absent' to '0.5.1-1'
'libjpeg8' changed from 'absent' to '8c-2ubuntu8'
'python-oslo.serialization' changed from 'absent' to '2.24.0-1.0~u16.04+mcp5'
'python-oslo.utils' changed from 'absent' to '3.35.1-1.0~u16.04+mcp3'
'python-pika-pool' changed from 'absent' to '0.1.3-1ubuntu1'
'python-keyrings.alt' changed from 'absent' to '1.1.1-1'
'python2.7-iso8601' changed from 'absent' to '1'
'python-numpy' changed from 'absent' to '1:1.11.0-1ubuntu1'
'python-tooz' changed from 'absent' to '1.59.0-1.0~u16.04+mcp1'
'python-simplegeneric' changed from 'absent' to '0.8.1-1'
'python-docutils' changed from 'absent' to '0.12+dfsg-1'
'gnocchi-common' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-openid' changed from 'absent' to '2.2.5-6'
'python-pastedeploy' changed from 'absent' to '1.5.2-1'
'python2.7-waitress' changed from 'absent' to '1'
'python-pecan' changed from 'absent' to '1.1.2-1.1~u16.04+mcp2'
'libpaper-utils' changed from 'absent' to '1.1.24+nmu4ubuntu1'
'python2.7-zope.interface' changed from 'absent' to '1'
'python-oslo.i18n' changed from 'absent' to '3.19.0-1.0~u16.04+mcp6'
'python-webtest' changed from 'absent' to '2.0.28-1.0~u16.04+mcp1'
'python-alembic' changed from 'absent' to '0.8.10-1.1~u16.04+mcp2'
'python-kazoo' changed from 'absent' to '2.2.1-1ubuntu1'
'python-statsd' changed from 'absent' to '3.2.1-2~u16.04+mcp2'
'python-redis' changed from 'absent' to '2.10.5-1ubuntu1'
'python-oslosphinx' changed from 'absent' to '4.10.0-0.1~u16.04+mcp3'
'python-waitress' changed from 'absent' to '0.8.10-1'
'python-oslo-utils' changed from 'absent' to '1'
'libblas.so.3' changed from 'absent' to '1'
'python-extras' changed from 'absent' to '1.0.0-2.0~u16.04+mcp1'
'python-wrapt' changed from 'absent' to '1.8.0-5build2'
'python-rfc3986' changed from 'absent' to '0.3.1-2.1~u16.04+mcp2'
'python-eventlet' changed from 'absent' to '0.20.0-4~u16.04+mcp2'
'python-unittest2' changed from 'absent' to '1.1.0-6.1'
'python2.7-pyparsing' changed from 'absent' to '1'
'python-oslo.log' changed from 'absent' to '3.36.0-1.0~u16.04+mcp8'
'python-pyinotify' changed from 'absent' to '0.9.6-1.1~u16.04+mcp2'
'libjpeg-turbo8' changed from 'absent' to '1.4.2-0ubuntu3.1'
'python-amqp' changed from 'absent' to '2.2.1-1~exp1~u16.04+mcp1'
'python-pbr' changed from 'absent' to '3.1.1-3.0~u16.04+mcp1'
'libwebp5' changed from 'absent' to '0.4.4-1'
'python-zope.interface' changed from 'absent' to '4.1.3-1build1'
'python-numpy-abi9' changed from 'absent' to '1'
'python-vine' changed from 'absent' to '1.1.3+dfsg-2~u16.04+mcp3'
'python-retrying' changed from 'absent' to '1.3.3-1'
'python-netifaces' changed from 'absent' to '0.10.4-0.1build2'
'python-decorator' changed from 'absent' to '4.0.6-1'
'python-oslo.messaging' changed from 'absent' to '5.35.3-1.0~u16.04+mcp16'
'python-tempita' changed from 'absent' to '0.5.2-1build1'
'python-json-pointer' changed from 'absent' to '1.9-3'
'python-dogpile.cache' changed from 'absent' to '0.6.2-1.1~u16.04+mcp2'
'python-html5lib' changed from 'absent' to '0.999-4'
'python-swiftclient' changed from 'absent' to '1:3.5.0-1~u16.04+mcp5'
'python-pika' changed from 'absent' to '0.10.0-1'
'python-keystoneclient' changed from 'absent' to '1:3.15.0-1.0~u16.04+mcp9'
'python-greenlet' changed from 'absent' to '0.4.12-2.0~u16.04+mcp1'
'python-sqlalchemy-ext' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-oslo.service' changed from 'absent' to '1.29.0-1.0~u16.04+mcp1'
'python-logutils' changed from 'absent' to '0.3.3-5'
'python-keyring' changed from 'absent' to '8.5.1-1.1~u16.04+mcp2'
'python-zopeinterface' changed from 'absent' to '1'
'python-traceback2' changed from 'absent' to '1.4.0-3'
'python-numpy-api10' changed from 'absent' to '1'
'python-keystoneauth1' changed from 'absent' to '3.4.0-1.0~u16.04+mcp12'
'python-sqlalchemy' changed from 'absent' to '1.0.13+ds1-1.1~u16.04+mcp2'
'python-keystonemiddleware' changed from 'absent' to '4.21.0-1.0~u16.04+mcp12'
'python-gnocchi' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python-setproctitle' changed from 'absent' to '1.1.8-1build2'
'python-zope' changed from 'absent' to '1'
'python-voluptuous' changed from 'absent' to '0.9.3-1.1~u16.04+mcp2'
'python-oslo-context' changed from 'absent' to '1'
'python-future' changed from 'absent' to '0.15.2-1'
'libjbig0' changed from 'absent' to '2.1-3.1'

2018-10-16 20:06:43,828 [salt.state       :905 ][INFO    ][13104] Loading fresh modules for state activity
2018-10-16 20:06:43,884 [salt.state       :1941][INFO    ][13104] Completed state [gnocchi-common] at time 20:06:43.884632 duration_in_ms=46166.032
2018-10-16 20:06:43,888 [salt.state       :1770][INFO    ][13104] Running state [gnocchi_ssl_mysql] at time 20:06:43.888222
2018-10-16 20:06:43,888 [salt.state       :1803][INFO    ][13104] Executing state test.show_notification for [gnocchi_ssl_mysql]
2018-10-16 20:06:43,888 [salt.state       :290 ][INFO    ][13104] Running gnocchi._ssl.mysql
2018-10-16 20:06:43,889 [salt.state       :1941][INFO    ][13104] Completed state [gnocchi_ssl_mysql] at time 20:06:43.889472 duration_in_ms=1.25
2018-10-16 20:06:43,892 [salt.state       :1770][INFO    ][13104] Running state [/etc/gnocchi/gnocchi.conf] at time 20:06:43.892441
2018-10-16 20:06:43,892 [salt.state       :1803][INFO    ][13104] Executing state file.managed for [/etc/gnocchi/gnocchi.conf]
2018-10-16 20:06:43,931 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/gnocchi.conf'
2018-10-16 20:06:44,071 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'gnocchi/files/4.2/storage/_redis.conf'
2018-10-16 20:06:44,094 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystonemiddleware/_auth_token.conf'
2018-10-16 20:06:44,152 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/keystoneauth/_type_password.conf'
2018-10-16 20:06:44,205 [salt.fileclient  :1215][INFO    ][13104] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_middleware.conf'
2018-10-16 20:06:44,220 [salt.state       :290 ][INFO    ][13104] File changed:
--- 
+++ 
@@ -1,3 +1,5 @@
+
+
 [DEFAULT]
 
 #
@@ -20,6 +22,7 @@
 
 # If set to true, the logging level will be set to DEBUG. (boolean value)
 #debug = false
+debug = False
 
 # If set to true, the logging level will be set to INFO. (boolean value)
 #verbose = true
@@ -34,6 +37,7 @@
 
 # Coordination driver URL (string value)
 #coordination_url = <None>
+coordination_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of threads to use to parallelize some operations. Default is set to
 # the number of CPU available. (integer value)
@@ -53,7 +57,6 @@
 # Syslog facility to receive log lines. (string value)
 #syslog_log_facility = user
 
-
 [api]
 
 #
@@ -65,10 +68,11 @@
 
 # Authentication mode to use. (string value)
 # Possible values:
+# remoteuser - <No description provided>
 # keystone - <No description provided>
-# remoteuser - <No description provided>
 # basic - <No description provided>
 #auth_mode = basic
+auth_mode = keystone
 
 # The maximum number of items returned in a single response from a collection
 # resource (integer value)
@@ -80,8 +84,8 @@
 # Deprecated group/name - [api]/refresh_timeout
 #operation_timeout = 10
 
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# Host to listen on (host address value)
+#host = 0.0.0.0
 
 # Port to listen on (port value)
 # Minimum value: 0
@@ -100,7 +104,6 @@
 # socket - <No description provided>
 #uwsgi_mode = http
 
-
 [archive_policy]
 
 #
@@ -110,216 +113,14 @@
 # Default aggregation methods to use in created archive policies (list value)
 #default_aggregation_methods = mean,min,max,sum,std,count
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = Authorization,X-Auth-Token,X-Subject-Token,X-User-Id,X-Domain-Id,X-Project-Id,X-Roles
-
-
-[healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#path = /healthcheck
-
-# Show more detailed information as part of the response (boolean value)
-#detailed = false
-
-# Additional backends that can perform health checks and report that
-# information back as part of a request. (list value)
-#backends =
-
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
-#disable_by_file_path = <None>
-
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
-#disable_by_file_paths =
-
-
 [incoming]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = ${storage.driver}
-
-# Ceph pool name to use. (string value)
-#ceph_pool = ${storage.ceph_pool}
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = ${storage.ceph_username}
-
-# Ceph key (string value)
-#ceph_secret = ${storage.ceph_secret}
-
-# Ceph keyring path. (string value)
-#ceph_keyring = ${storage.ceph_keyring}
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = ${storage.ceph_timeout}
-
-# Ceph configuration file. (string value)
-#ceph_conffile = ${storage.ceph_conffile}
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = ${storage.file_basepath}
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = ${storage.swift_auth_version}
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = ${storage.swift_auth_insecure}
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = ${storage.swift_url}
-
-# Swift auth URL. (string value)
-#swift_authurl = ${storage.swift_authurl}
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = ${storage.swift_preauthtoken}
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = ${storage.swift_cacert}
-
-# Swift region. (string value)
-#swift_region = ${storage.swift_region}
-
-# Swift user. (string value)
-#swift_user = ${storage.swift_user}
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = ${storage.swift_user_domain_name}
-
-# Swift key/password. (string value)
-#swift_key = ${storage.swift_key}
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [incoming]/swift_tenant_name
-#swift_project_name = ${storage.swift_project_name}
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = ${storage.swift_project_domain_name}
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = ${storage.swift_container_prefix}
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = ${storage.swift_endpoint_type}
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = ${storage.swift_service_type}
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = ${storage.swift_timeout}
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = ${storage.redis_url}
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = ${storage.s3_endpoint_url}
-
-# S3 region name (string value)
-#s3_region_name = ${storage.s3_region_name}
-
-# S3 access key id (string value)
-#s3_access_key_id = ${storage.s3_access_key_id}
-
-# S3 secret access key (string value)
-#s3_secret_access_key = ${storage.s3_secret_access_key}
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = ${storage.s3_bucket_prefix}
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = ${storage.s3_check_consistency_timeout}
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = ${storage.s3_max_pool_connections}
-
+driver = redis
+
+redis_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 [indexer]
-url = sqlite:////var/lib/gnocchi/gnocchidb
 
 #
 # From gnocchi
@@ -327,11 +128,8 @@
 
 # Indexer driver to use (string value)
 #url = <None>
-
-
+url = mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8
 [keystone_authtoken]
-auth_protocol = http
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -346,6 +144,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -361,6 +160,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -398,6 +198,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -515,153 +316,150 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[metricd]
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internal
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = gnocchi
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
+
+[statsd]
 
 #
 # From gnocchi
 #
 
-# Number of workers for Gnocchi metric daemons. By default the available number
-# of CPU is used. (integer value)
-# Minimum value: 1
-#workers = <None>
-
-# How many seconds to wait between scheduling new metrics to process (integer
-# value)
-#metric_processing_delay = 60
-
-# Allow to bypass `metric_processing_delay` if metricd is notified that
-# measures are ready to be processed. (boolean value)
-#greedy = true
-
-# How many seconds to wait between metric ingestion reporting. Set value to -1
-# to disable reporting (integer value)
-# Minimum value: -1
-#metric_reporting_delay = 120
-
-# How many seconds to wait between cleaning of expired data (integer value)
-#metric_cleanup_delay = 300
-
-# Number of workers that share a task. A higher value may improve worker
-# utilization but may also increase load on coordination backend. Value is
-# capped by number of workers globally. (integer value)
-# Minimum value: 1
-#processing_replicas = 3
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[statsd]
-
-#
-# From gnocchi
-#
-
-# Warning: Failed to format sample for host
-# unhashable type: 'HostAddress'
+# The listen IP for statsd (host address value)
+#host = 0.0.0.0
 
 # The port for statsd (port value)
 # Minimum value: 0
@@ -682,150 +480,6 @@
 
 
 [storage]
-
-#
-# From gnocchi
-#
-
-# Storage driver to use (string value)
-#driver = file
-
-# Ceph pool name to use. (string value)
-#ceph_pool = gnocchi
-
-# Ceph username (ie: admin without "client." prefix). (string value)
-#ceph_username = <None>
-
-# Ceph key (string value)
-#ceph_secret = <None>
-
-# Ceph keyring path. (string value)
-#ceph_keyring = <None>
-
-# Ceph connection timeout in seconds (string value)
-#ceph_timeout = 30
-
-# Ceph configuration file. (string value)
-#ceph_conffile = /etc/ceph/ceph.conf
-
-# Path used to store gnocchi data files. (string value)
-#file_basepath = /var/lib/gnocchi
-
-# Swift authentication version to user. (string value)
-#swift_auth_version = 1
-
-# If True, swiftclient won't check for a valid SSL certificate when
-# authenticating. (boolean value)
-#swift_auth_insecure = false
-
-# Swift URL. If unset, it is obtained from the auth service. (string value)
-#swift_url = <None>
-
-# Swift auth URL. (string value)
-#swift_authurl = http://localhost:8080/auth/v1.0
-
-# Swift token to user to authenticate. (string value)
-#swift_preauthtoken = <None>
-
-# A string giving the CA certificate file to use in SSL connections for
-# verifying certs. (string value)
-#swift_cacert = <None>
-
-# Swift region. (string value)
-#swift_region = <None>
-
-# Swift user. (string value)
-#swift_user = admin:admin
-
-# Swift user domain name. (string value)
-#swift_user_domain_name = Default
-
-# Swift key/password. (string value)
-#swift_key = admin
-
-# Swift tenant name, only used in v2/v3 auth. (string value)
-# Deprecated group/name - [storage]/swift_tenant_name
-#swift_project_name = <None>
-
-# Swift project domain name. (string value)
-#swift_project_domain_name = Default
-
-# Prefix to namespace metric containers. (string value)
-#swift_container_prefix = gnocchi
-
-# Endpoint type to connect to Swift (string value)
-#swift_endpoint_type = publicURL
-
-# A string giving the service type of the swift service to use. This setting is
-# only used if swift_auth_version is 2. (string value)
-#swift_service_type = object-store
-
-# Connection timeout in seconds. (integer value)
-# Minimum value: 0
-#swift_timeout = 300
-
-# Redis URL
-#
-#   For example::
-#
-#     redis://[:password]@localhost:6379?db=0
-#
-#   We proxy some options to the redis client (used to configure the redis
-# client
-#   internals so that it works as you expect/want it to):  `socket_keepalive`,
-# `sentinel_fallback`, `socket_timeout`, `encoding`, `ssl_certfile`, `ssl`,
-# `sentinel`, `ssl_keyfile`, `db`, `retry_on_timeout`
-#
-#   Further resources/links:
-#
-#    - http://redis-py.readthedocs.org/en/latest/#redis.Redis
-#    - https://github.com/andymccurdy/redis-py/blob/2.10.3/redis/client.py
-#
-#   To use a `sentinel`_ the connection URI must point to the sentinel server.
-#   At connection time the sentinel will be asked for the current IP and port
-#   of the master and then connect there. The connection URI for sentinel
-#   should be written as follows::
-#
-#     redis://<sentinel host>:<sentinel port>?sentinel=<master name>
-#
-#   Additional sentinel hosts are listed with multiple ``sentinel_fallback``
-#   parameters as follows::
-#
-#       redis://<sentinel host>:<sentinel port>?sentinel=<master name>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>&
-#         sentinel_fallback=<other sentinel host>:<sentinel port>
-#
-#   Further resources/links:
-#
-#   - http://redis.io/
-#   - http://redis.io/topics/sentinel
-#   - http://redis.io/topics/cluster-spec
-#
-#  (string value)
-#redis_url = redis://localhost:6379/
-
-# S3 endpoint URL (string value)
-#s3_endpoint_url = <None>
-
-# S3 region name (string value)
-#s3_region_name = <None>
-
-# S3 access key id (string value)
-#s3_access_key_id = <None>
-
-# S3 secret access key (string value)
-#s3_secret_access_key = <None>
-
-# Prefix to namespace metric bucket. (string value)
-#s3_bucket_prefix = gnocchi
-
-# Maximum time to wait checking data consistency when writing to S3. Set to 0
-# to disable data consistency validation. (floating point value)
-# Minimum value: 0
-#s3_check_consistency_timeout = 60
-
-# The maximum number of connections to keep in a connection pool. (integer
-# value)
-# Minimum value: 1
-#s3_max_pool_connections = 50
+driver = redis
+
+redis_url = redis://192.168.10.32:6379

2018-10-16 20:06:44,229 [salt.state       :1941][INFO    ][13104] Completed state [/etc/gnocchi/gnocchi.conf] at time 20:06:44.229186 duration_in_ms=336.745
2018-10-16 20:06:44,242 [salt.state       :1770][INFO    ][13104] Running state [gnocchi-api] at time 20:06:44.242864
2018-10-16 20:06:44,243 [salt.state       :1803][INFO    ][13104] Executing state pkg.installed for [gnocchi-api]
2018-10-16 20:06:46,114 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:06:46,158 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-api'] in directory '/root'
2018-10-16 20:06:50,374 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200650357515
2018-10-16 20:06:50,399 [salt.minion      :1431][INFO    ][18868] Starting a new job with PID 18868
2018-10-16 20:06:50,425 [salt.minion      :1708][INFO    ][18868] Returning information for job: 20181016200650357515
2018-10-16 20:06:57,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:06:57,239 [salt.state       :290 ][INFO    ][13104] Made the following changes:
'python-novaclient' changed from 'absent' to '2:9.1.1-1~u16.04+mcp6'
'python-mock' changed from 'absent' to '2.0.0-1.1~u16.04+mcp2'
'python-os-service-types' changed from 'absent' to '1.1.0-1.0~u16.04+mcp1'
'python-warlock' changed from 'absent' to '1.2.0-2.0~u16.04+mcp1'
'python-unicodecsv' changed from 'absent' to '0.14.1-1'
'python-jmespath' changed from 'absent' to '0.9.0-2'
'python-osc-lib' changed from 'absent' to '1.9.0-1.0~u16.04+mcp1'
'python-cinderclient' changed from 'absent' to '1:3.5.0-1.0~u16.04+mcp5'
'python-openstacksdk' changed from 'absent' to '0.11.3+repack-1.0~u16.04+mcp2'
'python-simplejson' changed from 'absent' to '3.8.1-1ubuntu2'
'python-glanceclient' changed from 'absent' to '1:2.10.0-1.0~u16.04+mcp5'
'python-functools32' changed from 'absent' to '3.2.3.2-2'
'python-cmd2' changed from 'absent' to '0.6.8-1'
'python-cliff' changed from 'absent' to '2.8.0-1~u16.04+mcp2'
'python-openstackclient' changed from 'absent' to '3.14.2-1.0~u16.04+mcp13'
'python2.7-simplejson' changed from 'absent' to '1'
'python-os-client-config' changed from 'absent' to '1.29.0-1.0~u16.04+mcp2'
'python-appdirs' changed from 'absent' to '1.4.0-2'
'python-requestsexceptions' changed from 'absent' to '1.3.0-3~u16.04+mcp2'
'python-neutronclient' changed from 'absent' to '1:6.7.0-1.0~u16.04+mcp17'
'gnocchi-api' changed from 'absent' to '4.2.4-3~u16.04+mcp1'
'python2.7-cmd2' changed from 'absent' to '1'
'python-munch' changed from 'absent' to '2.2.0-1.0~u16.04+mcp1'
'python-jsonschema' changed from 'absent' to '2.6.0-2.0~u16.04+mcp1'
'python2.7-cinderclient' changed from 'absent' to '1'
'python-deprecation' changed from 'absent' to '1.0.1-1~u16.04+mcp2'

2018-10-16 20:06:57,282 [salt.state       :905 ][INFO    ][13104] Loading fresh modules for state activity
2018-10-16 20:06:57,343 [salt.state       :1941][INFO    ][13104] Completed state [gnocchi-api] at time 20:06:57.343029 duration_in_ms=13100.164
2018-10-16 20:06:57,353 [salt.state       :1770][INFO    ][13104] Running state [gnocchi-metricd] at time 20:06:57.353678
2018-10-16 20:06:57,354 [salt.state       :1803][INFO    ][13104] Executing state pkg.installed for [gnocchi-metricd]
2018-10-16 20:06:58,896 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:06:58,941 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'gnocchi-metricd'] in directory '/root'
2018-10-16 20:07:00,552 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200700538710
2018-10-16 20:07:00,574 [salt.minion      :1431][INFO    ][19179] Starting a new job with PID 19179
2018-10-16 20:07:00,610 [salt.minion      :1708][INFO    ][19179] Returning information for job: 20181016200700538710
2018-10-16 20:07:02,621 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:07:02,682 [salt.state       :290 ][INFO    ][13104] Made the following changes:
'gnocchi-metricd' changed from 'absent' to '4.2.4-3~u16.04+mcp1'

2018-10-16 20:07:02,722 [salt.state       :905 ][INFO    ][13104] Loading fresh modules for state activity
2018-10-16 20:07:02,980 [salt.state       :1941][INFO    ][13104] Completed state [gnocchi-metricd] at time 20:07:02.980635 duration_in_ms=5626.955
2018-10-16 20:07:02,988 [salt.state       :1770][INFO    ][13104] Running state [python-memcache] at time 20:07:02.988254
2018-10-16 20:07:02,989 [salt.state       :1803][INFO    ][13104] Executing state pkg.installed for [python-memcache]
2018-10-16 20:07:03,999 [salt.state       :290 ][INFO    ][13104] All specified packages are already installed
2018-10-16 20:07:04,001 [salt.state       :1941][INFO    ][13104] Completed state [python-memcache] at time 20:07:04.001569 duration_in_ms=1013.315
2018-10-16 20:07:04,004 [salt.state       :1770][INFO    ][13104] Running state [gnocchi-upgrade] at time 20:07:04.004808
2018-10-16 20:07:04,005 [salt.state       :1803][INFO    ][13104] Executing state cmd.run for [gnocchi-upgrade]
2018-10-16 20:07:04,007 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command 'gnocchi-upgrade' as user 'gnocchi' in directory '/var/lib/gnocchi'
2018-10-16 20:07:06,637 [salt.state       :290 ][INFO    ][13104] {'pid': 19352, 'retcode': 0, 'stderr': '2018-10-16 20:07:05,851 [19355] INFO     gnocchi.service: Gnocchi version 4.2.4\n2018-10-16 20:07:06,332 [19355] INFO     gnocchi.cli.manage: Upgrading indexer SQLAlchemyIndexer: mysql+pymysql://gnocchi:opnfv_secret@192.168.10.23/gnocchi?charset=utf8\n2018-10-16 20:07:06,540 [19355] INFO     gnocchi.cli.manage: Upgrading storage RedisStorage: StrictRedis<ConnectionPool<Connection<host=192.168.10.32,port=6379,db=0>>>\n2018-10-16 20:07:06,543 [19355] INFO     gnocchi.cli.manage: Upgrading incoming storage RedisStorage: StrictRedis<SentinelConnectionPool<service=master_1(master)>', 'stdout': ''}
2018-10-16 20:07:06,640 [salt.state       :1941][INFO    ][13104] Completed state [gnocchi-upgrade] at time 20:07:06.640674 duration_in_ms=2635.866
2018-10-16 20:07:06,645 [salt.state       :1770][INFO    ][13104] Running state [wsgi_gnocchi] at time 20:07:06.645267
2018-10-16 20:07:06,646 [salt.state       :1803][INFO    ][13104] Executing state apache_site.enabled for [wsgi_gnocchi]
2018-10-16 20:07:06,649 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['a2ensite', 'wsgi_gnocchi'] in directory '/root'
2018-10-16 20:07:06,727 [salt.state       :290 ][INFO    ][13104] {'new': 'wsgi_gnocchi', 'old': None}
2018-10-16 20:07:06,729 [salt.state       :1941][INFO    ][13104] Completed state [wsgi_gnocchi] at time 20:07:06.729763 duration_in_ms=84.497
2018-10-16 20:07:06,734 [salt.state       :1770][INFO    ][13104] Running state [apache2] at time 20:07:06.734752
2018-10-16 20:07:06,735 [salt.state       :1803][INFO    ][13104] Executing state service.running for [apache2]
2018-10-16 20:07:06,737 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:07:06,764 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 20:07:06,794 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'apache2.service'] in directory '/root'
2018-10-16 20:07:08,015 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:07:08,042 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 20:07:08,076 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 20:07:08,102 [salt.state       :290 ][INFO    ][13104] {'apache2': True}
2018-10-16 20:07:08,103 [salt.state       :1941][INFO    ][13104] Completed state [apache2] at time 20:07:08.103071 duration_in_ms=1368.319
2018-10-16 20:07:08,105 [salt.state       :1770][INFO    ][13104] Running state [gnocchi-metricd] at time 20:07:08.104912
2018-10-16 20:07:08,106 [salt.state       :1803][INFO    ][13104] Executing state service.running for [gnocchi-metricd]
2018-10-16 20:07:08,108 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'status', 'gnocchi-metricd.service', '-n', '0'] in directory '/root'
2018-10-16 20:07:08,136 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:08,156 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:08,184 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'systemctl', 'start', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:08,247 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-active', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:08,291 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:08,344 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:08,400 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemd-run', '--scope', 'systemctl', 'enable', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:09,302 [salt.loaded.int.module.cmdmod:395 ][INFO    ][13104] Executing command ['systemctl', 'is-enabled', 'gnocchi-metricd.service'] in directory '/root'
2018-10-16 20:07:09,346 [salt.state       :290 ][INFO    ][13104] {'gnocchi-metricd': True}
2018-10-16 20:07:09,347 [salt.state       :1941][INFO    ][13104] Completed state [gnocchi-metricd] at time 20:07:09.346913 duration_in_ms=1242.0
2018-10-16 20:07:09,356 [salt.minion      :1708][INFO    ][13104] Returning information for job: 20181016200524396668
2018-10-16 20:08:57,468 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command test.ping with jid 20181016200857455827
2018-10-16 20:08:57,491 [salt.minion      :1431][INFO    ][19649] Starting a new job with PID 19649
2018-10-16 20:08:57,519 [salt.minion      :1708][INFO    ][19649] Returning information for job: 20181016200857455827
2018-10-16 20:09:32,065 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016200932049102
2018-10-16 20:09:32,086 [salt.minion      :1431][INFO    ][19664] Starting a new job with PID 19664
2018-10-16 20:09:37,079 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200937066338
2018-10-16 20:09:37,110 [salt.minion      :1431][INFO    ][19669] Starting a new job with PID 19669
2018-10-16 20:09:37,138 [salt.minion      :1708][INFO    ][19669] Returning information for job: 20181016200937066338
2018-10-16 20:09:40,377 [salt.state       :905 ][INFO    ][19664] Loading fresh modules for state activity
2018-10-16 20:09:40,461 [salt.fileclient  :1215][INFO    ][19664] Fetching file from saltenv 'base', ** done ** 'panko/init.sls'
2018-10-16 20:09:40,501 [salt.fileclient  :1215][INFO    ][19664] Fetching file from saltenv 'base', ** done ** 'panko/server.sls'
2018-10-16 20:09:41,301 [salt.fileclient  :1215][INFO    ][19664] Fetching file from saltenv 'base', ** done ** 'panko/_ssl/mysql.sls'
2018-10-16 20:09:43,467 [salt.state       :1770][INFO    ][19664] Running state [apache2] at time 20:09:43.466918
2018-10-16 20:09:43,468 [salt.state       :1803][INFO    ][19664] Executing state pkg.installed for [apache2]
2018-10-16 20:09:43,470 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:09:44,030 [salt.state       :290 ][INFO    ][19664] All specified packages are already installed
2018-10-16 20:09:44,031 [salt.state       :1941][INFO    ][19664] Completed state [apache2] at time 20:09:44.031659 duration_in_ms=564.742
2018-10-16 20:09:44,032 [salt.state       :1770][INFO    ][19664] Running state [openssl] at time 20:09:44.032399
2018-10-16 20:09:44,033 [salt.state       :1803][INFO    ][19664] Executing state pkg.installed for [openssl]
2018-10-16 20:09:44,044 [salt.state       :290 ][INFO    ][19664] All specified packages are already installed
2018-10-16 20:09:44,045 [salt.state       :1941][INFO    ][19664] Completed state [openssl] at time 20:09:44.045328 duration_in_ms=12.929
2018-10-16 20:09:44,046 [salt.state       :1770][INFO    ][19664] Running state [a2enmod rewrite] at time 20:09:44.046826
2018-10-16 20:09:44,048 [salt.state       :1803][INFO    ][19664] Executing state cmd.run for [a2enmod rewrite]
2018-10-16 20:09:44,048 [salt.state       :290 ][INFO    ][19664] /etc/apache2/mods-enabled/rewrite.load exists
2018-10-16 20:09:44,049 [salt.state       :1941][INFO    ][19664] Completed state [a2enmod rewrite] at time 20:09:44.049073 duration_in_ms=2.246
2018-10-16 20:09:44,050 [salt.state       :1770][INFO    ][19664] Running state [libapache2-mod-wsgi] at time 20:09:44.050083
2018-10-16 20:09:44,050 [salt.state       :1803][INFO    ][19664] Executing state pkg.installed for [libapache2-mod-wsgi]
2018-10-16 20:09:44,062 [salt.state       :290 ][INFO    ][19664] All specified packages are already installed
2018-10-16 20:09:44,062 [salt.state       :1941][INFO    ][19664] Completed state [libapache2-mod-wsgi] at time 20:09:44.062882 duration_in_ms=12.799
2018-10-16 20:09:44,064 [salt.state       :1770][INFO    ][19664] Running state [a2enmod wsgi] at time 20:09:44.064566
2018-10-16 20:09:44,065 [salt.state       :1803][INFO    ][19664] Executing state cmd.run for [a2enmod wsgi]
2018-10-16 20:09:44,066 [salt.state       :290 ][INFO    ][19664] /etc/apache2/mods-enabled/wsgi.load exists
2018-10-16 20:09:44,067 [salt.state       :1941][INFO    ][19664] Completed state [a2enmod wsgi] at time 20:09:44.067014 duration_in_ms=2.448
2018-10-16 20:09:44,079 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/mods-available/mpm_prefork.conf] at time 20:09:44.079357
2018-10-16 20:09:44,079 [salt.state       :1803][INFO    ][19664] Executing state file.managed for [/etc/apache2/mods-available/mpm_prefork.conf]
2018-10-16 20:09:44,410 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/mods-available/mpm_prefork.conf is in the correct state
2018-10-16 20:09:44,412 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/mods-available/mpm_prefork.conf] at time 20:09:44.412295 duration_in_ms=332.937
2018-10-16 20:09:44,412 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/mods-enabled/mpm_worker.load] at time 20:09:44.412834
2018-10-16 20:09:44,413 [salt.state       :1803][INFO    ][19664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.load]
2018-10-16 20:09:44,414 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/mods-enabled/mpm_worker.load is not present
2018-10-16 20:09:44,414 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/mods-enabled/mpm_worker.load] at time 20:09:44.414472 duration_in_ms=1.638
2018-10-16 20:09:44,415 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/mods-enabled/mpm_event.load] at time 20:09:44.414975
2018-10-16 20:09:44,415 [salt.state       :1803][INFO    ][19664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.load]
2018-10-16 20:09:44,416 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/mods-enabled/mpm_event.load is not present
2018-10-16 20:09:44,416 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/mods-enabled/mpm_event.load] at time 20:09:44.416530 duration_in_ms=1.555
2018-10-16 20:09:44,417 [salt.state       :1770][INFO    ][19664] Running state [a2enmod mpm_prefork] at time 20:09:44.417568
2018-10-16 20:09:44,418 [salt.state       :1803][INFO    ][19664] Executing state cmd.run for [a2enmod mpm_prefork]
2018-10-16 20:09:44,419 [salt.state       :290 ][INFO    ][19664] /etc/apache2/mods-enabled/mpm_prefork.load exists
2018-10-16 20:09:44,419 [salt.state       :1941][INFO    ][19664] Completed state [a2enmod mpm_prefork] at time 20:09:44.419882 duration_in_ms=2.314
2018-10-16 20:09:44,420 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 20:09:44.420445
2018-10-16 20:09:44,421 [salt.state       :1803][INFO    ][19664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_worker.conf]
2018-10-16 20:09:44,422 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/mods-enabled/mpm_worker.conf is not present
2018-10-16 20:09:44,422 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/mods-enabled/mpm_worker.conf] at time 20:09:44.422907 duration_in_ms=2.462
2018-10-16 20:09:44,423 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/mods-enabled/mpm_event.conf] at time 20:09:44.423411
2018-10-16 20:09:44,424 [salt.state       :1803][INFO    ][19664] Executing state file.absent for [/etc/apache2/mods-enabled/mpm_event.conf]
2018-10-16 20:09:44,424 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/mods-enabled/mpm_event.conf is not present
2018-10-16 20:09:44,426 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/mods-enabled/mpm_event.conf] at time 20:09:44.425980 duration_in_ms=2.569
2018-10-16 20:09:44,427 [salt.state       :1770][INFO    ][19664] Running state [apache_server_service_task] at time 20:09:44.427134
2018-10-16 20:09:44,427 [salt.state       :1803][INFO    ][19664] Executing state test.show_notification for [apache_server_service_task]
2018-10-16 20:09:44,428 [salt.state       :290 ][INFO    ][19664] Running apache.server.service
2018-10-16 20:09:44,428 [salt.state       :1941][INFO    ][19664] Completed state [apache_server_service_task] at time 20:09:44.428660 duration_in_ms=1.527
2018-10-16 20:09:44,429 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/ports.conf] at time 20:09:44.429772
2018-10-16 20:09:44,430 [salt.state       :1803][INFO    ][19664] Executing state file.managed for [/etc/apache2/ports.conf]
2018-10-16 20:09:44,514 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/ports.conf is in the correct state
2018-10-16 20:09:44,515 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/ports.conf] at time 20:09:44.515187 duration_in_ms=85.415
2018-10-16 20:09:44,515 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/conf-available/security.conf] at time 20:09:44.515938
2018-10-16 20:09:44,516 [salt.state       :1803][INFO    ][19664] Executing state file.managed for [/etc/apache2/conf-available/security.conf]
2018-10-16 20:09:44,609 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/conf-available/security.conf is in the correct state
2018-10-16 20:09:44,609 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/conf-available/security.conf] at time 20:09:44.609938 duration_in_ms=94.0
2018-10-16 20:09:44,619 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/sites-enabled/000-default.conf] at time 20:09:44.619528
2018-10-16 20:09:44,620 [salt.state       :1803][INFO    ][19664] Executing state file.absent for [/etc/apache2/sites-enabled/000-default.conf]
2018-10-16 20:09:44,620 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/sites-enabled/000-default.conf is not present
2018-10-16 20:09:44,621 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/sites-enabled/000-default.conf] at time 20:09:44.620971 duration_in_ms=1.443
2018-10-16 20:09:44,621 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 20:09:44.621418
2018-10-16 20:09:44,621 [salt.state       :1803][INFO    ][19664] Executing state file.managed for [/etc/apache2/sites-available/wsgi_gnocchi.conf]
2018-10-16 20:09:44,894 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/sites-available/wsgi_gnocchi.conf is in the correct state
2018-10-16 20:09:44,894 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/sites-available/wsgi_gnocchi.conf] at time 20:09:44.894454 duration_in_ms=273.036
2018-10-16 20:09:44,894 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/sites-available/wsgi_panko.conf] at time 20:09:44.894942
2018-10-16 20:09:44,895 [salt.state       :1803][INFO    ][19664] Executing state file.managed for [/etc/apache2/sites-available/wsgi_panko.conf]
2018-10-16 20:09:45,184 [salt.state       :290 ][INFO    ][19664] File /etc/apache2/sites-available/wsgi_panko.conf is in the correct state
2018-10-16 20:09:45,185 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/sites-available/wsgi_panko.conf] at time 20:09:45.185544 duration_in_ms=290.601
2018-10-16 20:09:45,190 [salt.state       :1770][INFO    ][19664] Running state [apache2] at time 20:09:45.190296
2018-10-16 20:09:45,190 [salt.state       :1803][INFO    ][19664] Executing state service.running for [apache2]
2018-10-16 20:09:45,191 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-16 20:09:45,243 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:09:45,268 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 20:09:45,305 [salt.state       :290 ][INFO    ][19664] The service apache2 is already running
2018-10-16 20:09:45,306 [salt.state       :1941][INFO    ][19664] Completed state [apache2] at time 20:09:45.305927 duration_in_ms=115.631
2018-10-16 20:09:45,307 [salt.state       :1770][INFO    ][19664] Running state [/etc/apache2/conf-enabled/security.conf] at time 20:09:45.307195
2018-10-16 20:09:45,308 [salt.state       :1803][INFO    ][19664] Executing state file.symlink for [/etc/apache2/conf-enabled/security.conf]
2018-10-16 20:09:45,314 [salt.state       :290 ][INFO    ][19664] Symlink /etc/apache2/conf-enabled/security.conf is present and owned by root:root
2018-10-16 20:09:45,314 [salt.state       :1941][INFO    ][19664] Completed state [/etc/apache2/conf-enabled/security.conf] at time 20:09:45.314312 duration_in_ms=7.117
2018-10-16 20:09:45,315 [salt.state       :1770][INFO    ][19664] Running state [panko-api] at time 20:09:45.315760
2018-10-16 20:09:45,316 [salt.state       :1803][INFO    ][19664] Executing state pkg.installed for [panko-api]
2018-10-16 20:09:45,347 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['apt-cache', '-q', 'policy', 'panko-api'] in directory '/root'
2018-10-16 20:09:45,508 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 20:09:47,233 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200947219691
2018-10-16 20:09:47,258 [salt.minion      :1431][INFO    ][20052] Starting a new job with PID 20052
2018-10-16 20:09:47,300 [salt.minion      :1708][INFO    ][20052] Returning information for job: 20181016200947219691
2018-10-16 20:09:48,770 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:09:48,813 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'panko-api'] in directory '/root'
2018-10-16 20:09:52,894 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:09:52,966 [salt.state       :290 ][INFO    ][19664] Made the following changes:
'python-ipaddr' changed from 'absent' to '2.1.11-2'
'python-panko' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-defusedxml' changed from 'absent' to '0.5.0-1~u16.04+mcp1'
'python-wsme' changed from 'absent' to '0.8.0-2ubuntu2'
'panko-common' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'panko-api' changed from 'absent' to '4.0.2-2~u16.04+mcp5'
'python-oslo.reports' changed from 'absent' to '1.26.0-1.0~u16.04+mcp2'

2018-10-16 20:09:53,012 [salt.state       :905 ][INFO    ][19664] Loading fresh modules for state activity
2018-10-16 20:09:53,064 [salt.state       :1941][INFO    ][19664] Completed state [panko-api] at time 20:09:53.064602 duration_in_ms=7748.842
2018-10-16 20:09:53,068 [salt.state       :1770][INFO    ][19664] Running state [panko_ssl_mysql] at time 20:09:53.068711
2018-10-16 20:09:53,069 [salt.state       :1803][INFO    ][19664] Executing state test.show_notification for [panko_ssl_mysql]
2018-10-16 20:09:53,070 [salt.state       :290 ][INFO    ][19664] Running panko._ssl.mysql
2018-10-16 20:09:53,070 [salt.state       :1941][INFO    ][19664] Completed state [panko_ssl_mysql] at time 20:09:53.070249 duration_in_ms=1.538
2018-10-16 20:09:53,072 [salt.state       :1770][INFO    ][19664] Running state [/etc/panko/panko.conf] at time 20:09:53.072490
2018-10-16 20:09:53,072 [salt.state       :1803][INFO    ][19664] Executing state file.managed for [/etc/panko/panko.conf]
2018-10-16 20:09:53,105 [salt.fileclient  :1215][INFO    ][19664] Fetching file from saltenv 'base', ** done ** 'panko/files/queens/panko.conf.Debian'
2018-10-16 20:09:53,163 [salt.fileclient  :1215][INFO    ][19664] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_log.conf'
2018-10-16 20:09:53,187 [salt.fileclient  :1215][INFO    ][19664] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_database.conf'
2018-10-16 20:09:53,286 [salt.state       :290 ][INFO    ][19664] File changed:
--- 
+++ 
@@ -1,125 +1,126 @@
 [DEFAULT]
 
 #
+# From panko
+#
+
+# Configuration file for WSGI definition of API. (string value)
+#api_paste_config = api_paste.ini
+#
 # From oslo.log
 #
 
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
 # Note: This option can be changed without restarting.
 #debug = false
 
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
 # Note: This option can be changed without restarting.
 # Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
 
 # Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
 #log_date_format = %Y-%m-%d %H:%M:%S
 
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logfile
 #log_file = <None>
 
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
 # Deprecated group/name - [DEFAULT]/logdir
 #log_dir = <None>
 
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
 # (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
 #use_journal = false
 
 # Syslog facility to receive log lines. This option is ignored if
 # log_config_append is set. (string value)
 #syslog_log_facility = LOG_USER
 
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_json = false
 
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
 #use_stderr = false
 
 # Format string to use for log messages with context. (string value)
 #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
 
-# Format string to use for log messages when context is undefined. (string
-# value)
+# Format string to use for log messages when context is undefined.
+# (string value)
 #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
 
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
 #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
 
-# Prefix each line of exception output with this format. (string value)
+# Prefix each line of exception output with this format. (string
+# value)
 #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
 
 # Defines the format string for %(user_identity)s that is used in
 # logging_context_format_string. (string value)
 #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
 
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
 #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
 
 # Enables or disables publication of error events. (boolean value)
 #publish_errors = false
 
-# The format for an instance that is passed with the log message. (string
-# value)
+# The format for an instance that is passed with the log message.
+# (string value)
 #instance_format = "[instance: %(uuid)s] "
 
-# The format for an instance UUID that is passed with the log message. (string
-# value)
+# The format for an instance UUID that is passed with the log message.
+# (string value)
 #instance_uuid_format = "[instance: %(uuid)s] "
 
 # Interval, number of seconds, of log rate limiting. (integer value)
 #rate_limit_interval = 0
 
-# Maximum number of logged messages per rate_limit_interval. (integer value)
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
 #rate_limit_burst = 0
 
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
 #rate_limit_except_level = CRITICAL
 
 # Enables or disables fatal status of deprecations. (boolean value)
 #fatal_deprecations = false
-
-#
-# From panko
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
 
 [api]
 
@@ -131,38 +132,24 @@
 # Minimum value: 1
 #default_api_return_limit = 100
 
-
 [cors]
 
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-Openstack-Request-Id
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-Openstack-Request-Id
-
-
 [database]
 
+#
+# From panko
+#
+
+# Number of seconds that events are kept in the database for (<= 0 means
+# forever). (integer value)
+#event_time_to_live = -1
+event_time_to_live = 2592000
+
+# DEPRECATED: The connection string used to connect to the event database -
+# rather use ${database.connection} (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#event_connection = <None>
 #
 # From oslo.db
 #
@@ -172,68 +159,75 @@
 
 # The back end to use for the database. (string value)
 # Deprecated group/name - [DEFAULT]/db_backend
-backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+#backend = sqlalchemy
+
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
-connection = sqlite:////var/lib/panko/sqlite.db
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+#connection = <None>
+connection = mysql+pymysql://panko:opnfv_secret@192.168.10.23/panko?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -243,46 +237,64 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
 
 #
-# From panko
-#
-
-# Number of seconds that events are kept in the database for (<= 0 means
-# forever). (integer value)
-#event_time_to_live = -1
-
-# DEPRECATED: The connection string used to connect to the event database -
-# rather use ${database.connection} (string value)
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
-#event_connection = <None>
-
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
+[oslo_policy]
 
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -297,6 +309,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -312,6 +325,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -349,6 +363,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -466,110 +481,118 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
 # value)
 # Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = panko
 
 [storage]
 

2018-10-16 20:09:53,287 [salt.state       :1941][INFO    ][19664] Completed state [/etc/panko/panko.conf] at time 20:09:53.287418 duration_in_ms=214.928
2018-10-16 20:09:53,292 [salt.state       :1770][INFO    ][19664] Running state [/usr/bin/panko-expirer --use-syslog] at time 20:09:53.292351
2018-10-16 20:09:53,292 [salt.state       :1803][INFO    ][19664] Executing state cron.present for [/usr/bin/panko-expirer --use-syslog]
2018-10-16 20:09:53,298 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command 'crontab -u panko -l' in directory '/root'
2018-10-16 20:09:53,324 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][19664] Command '['crontab', '-u', 'panko', '-l']' failed with return code: 1
2018-10-16 20:09:53,325 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][19664] stderr: no crontab for panko

2018-10-16 20:09:53,325 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][19664] retcode: 1
2018-10-16 20:09:53,327 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command 'crontab -u panko /tmp/__salt.tmp.roB5hg' in directory '/root'
2018-10-16 20:09:53,366 [salt.state       :290 ][INFO    ][19664] {'panko': '/usr/bin/panko-expirer --use-syslog'}
2018-10-16 20:09:53,367 [salt.state       :1941][INFO    ][19664] Completed state [/usr/bin/panko-expirer --use-syslog] at time 20:09:53.366929 duration_in_ms=74.577
2018-10-16 20:09:53,369 [salt.state       :1770][INFO    ][19664] Running state [panko-dbsync] at time 20:09:53.369436
2018-10-16 20:09:53,370 [salt.state       :1803][INFO    ][19664] Executing state cmd.run for [panko-dbsync]
2018-10-16 20:09:53,372 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command 'panko-dbsync' in directory '/root'
2018-10-16 20:09:55,424 [salt.state       :290 ][INFO    ][19664] {'pid': 20290, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-16 20:09:55,425 [salt.state       :1941][INFO    ][19664] Completed state [panko-dbsync] at time 20:09:55.425142 duration_in_ms=2055.706
2018-10-16 20:09:55,435 [salt.state       :1770][INFO    ][19664] Running state [wsgi_panko] at time 20:09:55.434966
2018-10-16 20:09:55,435 [salt.state       :1803][INFO    ][19664] Executing state apache_site.enabled for [wsgi_panko]
2018-10-16 20:09:55,436 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['a2ensite', 'wsgi_panko'] in directory '/root'
2018-10-16 20:09:55,518 [salt.state       :290 ][INFO    ][19664] {'new': 'wsgi_panko', 'old': None}
2018-10-16 20:09:55,519 [salt.state       :1941][INFO    ][19664] Completed state [wsgi_panko] at time 20:09:55.518922 duration_in_ms=83.955
2018-10-16 20:09:56,206 [salt.state       :1770][INFO    ][19664] Running state [apache2] at time 20:09:56.206304
2018-10-16 20:09:56,206 [salt.state       :1803][INFO    ][19664] Executing state service.running for [apache2]
2018-10-16 20:09:56,208 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:09:56,235 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 20:09:56,267 [salt.state       :290 ][INFO    ][19664] The service apache2 is already running
2018-10-16 20:09:56,269 [salt.state       :1941][INFO    ][19664] Completed state [apache2] at time 20:09:56.268833 duration_in_ms=62.529
2018-10-16 20:09:56,269 [salt.state       :1770][INFO    ][19664] Running state [apache2] at time 20:09:56.269925
2018-10-16 20:09:56,271 [salt.state       :1803][INFO    ][19664] Executing state service.mod_watch for [apache2]
2018-10-16 20:09:56,274 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:09:56,311 [salt.loaded.int.module.cmdmod:395 ][INFO    ][19664] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-16 20:09:57,442 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016200957422872
2018-10-16 20:09:57,469 [salt.minion      :1431][INFO    ][20357] Starting a new job with PID 20357
2018-10-16 20:09:57,500 [salt.minion      :1708][INFO    ][20357] Returning information for job: 20181016200957422872
2018-10-16 20:09:58,675 [salt.state       :290 ][INFO    ][19664] {'apache2': True}
2018-10-16 20:09:58,676 [salt.state       :1941][INFO    ][19664] Completed state [apache2] at time 20:09:58.676620 duration_in_ms=2406.694
2018-10-16 20:09:58,689 [salt.minion      :1708][INFO    ][19664] Returning information for job: 20181016200932049102
2018-10-16 20:10:25,942 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command test.ping with jid 20181016201025931575
2018-10-16 20:10:25,967 [salt.minion      :1431][INFO    ][20462] Starting a new job with PID 20462
2018-10-16 20:10:25,996 [salt.minion      :1708][INFO    ][20462] Returning information for job: 20181016201025931575
2018-10-16 20:11:52,844 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016201152828949
2018-10-16 20:11:52,869 [salt.minion      :1431][INFO    ][20467] Starting a new job with PID 20467
2018-10-16 20:11:57,858 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201157844733
2018-10-16 20:11:57,880 [salt.minion      :1431][INFO    ][20472] Starting a new job with PID 20472
2018-10-16 20:11:57,910 [salt.minion      :1708][INFO    ][20472] Returning information for job: 20181016201157844733
2018-10-16 20:12:01,230 [salt.state       :905 ][INFO    ][20467] Loading fresh modules for state activity
2018-10-16 20:12:01,305 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'aodh/init.sls'
2018-10-16 20:12:01,344 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'aodh/server.sls'
2018-10-16 20:12:01,569 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/mysql.sls'
2018-10-16 20:12:01,639 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'aodh/_ssl/rabbitmq.sls'
2018-10-16 20:12:03,973 [salt.state       :1770][INFO    ][20467] Running state [aodh-api] at time 20:12:03.973809
2018-10-16 20:12:03,974 [salt.state       :1803][INFO    ][20467] Executing state pkg.installed for [aodh-api]
2018-10-16 20:12:03,976 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:12:04,595 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['apt-cache', '-q', 'policy', 'aodh-api'] in directory '/root'
2018-10-16 20:12:04,790 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 20:12:07,264 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:12:07,312 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-api'] in directory '/root'
2018-10-16 20:12:07,969 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201207956827
2018-10-16 20:12:07,991 [salt.minion      :1431][INFO    ][20854] Starting a new job with PID 20854
2018-10-16 20:12:08,022 [salt.minion      :1708][INFO    ][20854] Returning information for job: 20181016201207956827
2018-10-16 20:12:18,148 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201218128564
2018-10-16 20:12:18,170 [salt.minion      :1431][INFO    ][21243] Starting a new job with PID 21243
2018-10-16 20:12:18,197 [salt.minion      :1708][INFO    ][21243] Returning information for job: 20181016201218128564
2018-10-16 20:12:25,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:12:25,990 [salt.state       :290 ][INFO    ][20467] Made the following changes:
'build-essential' changed from 'absent' to '12.1ubuntu2'
'c++-compiler' changed from 'absent' to '1'
'libgomp1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'cpp' changed from 'absent' to '4:5.3.1-1ubuntu1'
'libalgorithm-merge-perl' changed from 'absent' to '0.08-3'
'python-aodh' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'libfakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'linux-libc-dev' changed from 'absent' to '4.4.0-137.163'
'gcc-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libubsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-xs-perl' changed from 'absent' to '0.04-4build1'
'gcc' changed from 'absent' to '4:5.3.1-1ubuntu1'
'aodh-common' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'make' changed from 'absent' to '4.1-6'
'libitm1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libfile-fcntllock-perl' changed from 'absent' to '0.22-3'
'c-compiler' changed from 'absent' to '1'
'g++' changed from 'absent' to '4:5.3.1-1ubuntu1'
'cpp:any' changed from 'absent' to '1'
'libmpc3' changed from 'absent' to '1.0.3-1'
'dpkg-dev' changed from 'absent' to '1.18.4ubuntu1.4'
'libmpx0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libstdc++-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'g++-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libc-dev-bin' changed from 'absent' to '2.23-0ubuntu10'
'make:any' changed from 'absent' to '1'
'libatomic1' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libtsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libasan2' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-ceilometerclient' changed from 'absent' to '2.9.0-2~u16.04+mcp1'
'libstdc++-dev' changed from 'absent' to '1'
'libc6-dev' changed from 'absent' to '2.23-0ubuntu10'
'libdpkg-perl' changed from 'absent' to '1.18.4ubuntu1.4'
'libcilkrts5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-gnocchiclient' changed from 'absent' to '7.0.2-1~u16.04+mcp0'
'elf-binutils' changed from 'absent' to '1'
'aodh-api' changed from 'absent' to '6.0.1-2~u16.04+mcp9'
'manpages-dev' changed from 'absent' to '4.04-2'
'cpp-5' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'python-croniter' changed from 'absent' to '0.3.8-1'
'c++abi2-dev' changed from 'absent' to '1'
'libisl15' changed from 'absent' to '0.16.1-1'
'linux-kernel-headers' changed from 'absent' to '1'
'liblsan0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'fakeroot' changed from 'absent' to '1.20.2-1ubuntu1'
'libc-dev' changed from 'absent' to '1'
'libgcc-5-dev' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'binutils-gold' changed from 'absent' to '1'
'libcc1-0' changed from 'absent' to '5.4.0-6ubuntu1~16.04.10'
'libalgorithm-diff-perl' changed from 'absent' to '1.19.03-1'
'binutils' changed from 'absent' to '2.26.1-1ubuntu1~16.04.7'

2018-10-16 20:12:26,047 [salt.state       :905 ][INFO    ][20467] Loading fresh modules for state activity
2018-10-16 20:12:26,309 [salt.state       :1941][INFO    ][20467] Completed state [aodh-api] at time 20:12:26.309496 duration_in_ms=22335.686
2018-10-16 20:12:26,324 [salt.state       :1770][INFO    ][20467] Running state [aodh-evaluator] at time 20:12:26.324224
2018-10-16 20:12:26,324 [salt.state       :1803][INFO    ][20467] Executing state pkg.installed for [aodh-evaluator]
2018-10-16 20:12:27,321 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:12:27,369 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-evaluator'] in directory '/root'
2018-10-16 20:12:28,322 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201228305502
2018-10-16 20:12:28,346 [salt.minion      :1431][INFO    ][26120] Starting a new job with PID 26120
2018-10-16 20:12:28,371 [salt.minion      :1708][INFO    ][26120] Returning information for job: 20181016201228305502
2018-10-16 20:12:31,413 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:12:31,478 [salt.state       :290 ][INFO    ][20467] Made the following changes:
'aodh-evaluator' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-16 20:12:31,514 [salt.state       :905 ][INFO    ][20467] Loading fresh modules for state activity
2018-10-16 20:12:31,574 [salt.state       :1941][INFO    ][20467] Completed state [aodh-evaluator] at time 20:12:31.574388 duration_in_ms=5250.163
2018-10-16 20:12:31,583 [salt.state       :1770][INFO    ][20467] Running state [aodh-notifier] at time 20:12:31.583599
2018-10-16 20:12:31,583 [salt.state       :1803][INFO    ][20467] Executing state pkg.installed for [aodh-notifier]
2018-10-16 20:12:32,938 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:12:32,988 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-notifier'] in directory '/root'
2018-10-16 20:12:37,064 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:12:37,129 [salt.state       :290 ][INFO    ][20467] Made the following changes:
'aodh-notifier' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-16 20:12:37,166 [salt.state       :905 ][INFO    ][20467] Loading fresh modules for state activity
2018-10-16 20:12:37,220 [salt.state       :1941][INFO    ][20467] Completed state [aodh-notifier] at time 20:12:37.220003 duration_in_ms=5636.394
2018-10-16 20:12:37,227 [salt.state       :1770][INFO    ][20467] Running state [aodh-listener] at time 20:12:37.227562
2018-10-16 20:12:37,227 [salt.state       :1803][INFO    ][20467] Executing state pkg.installed for [aodh-listener]
2018-10-16 20:12:38,407 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:12:38,450 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'aodh-listener'] in directory '/root'
2018-10-16 20:12:38,497 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201238479348
2018-10-16 20:12:38,546 [salt.minion      :1431][INFO    ][26681] Starting a new job with PID 26681
2018-10-16 20:12:38,571 [salt.minion      :1708][INFO    ][26681] Returning information for job: 20181016201238479348
2018-10-16 20:12:42,343 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:12:42,402 [salt.state       :290 ][INFO    ][20467] Made the following changes:
'aodh-listener' changed from 'absent' to '6.0.1-2~u16.04+mcp9'

2018-10-16 20:12:42,437 [salt.state       :905 ][INFO    ][20467] Loading fresh modules for state activity
2018-10-16 20:12:42,504 [salt.state       :1941][INFO    ][20467] Completed state [aodh-listener] at time 20:12:42.504803 duration_in_ms=5277.24
2018-10-16 20:12:42,522 [salt.state       :1770][INFO    ][20467] Running state [python-aodhclient] at time 20:12:42.521974
2018-10-16 20:12:42,522 [salt.state       :1803][INFO    ][20467] Executing state pkg.installed for [python-aodhclient]
2018-10-16 20:12:43,788 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:12:43,834 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'python-aodhclient'] in directory '/root'
2018-10-16 20:12:46,457 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:12:46,532 [salt.state       :290 ][INFO    ][20467] Made the following changes:
'python-aodhclient' changed from 'absent' to '1.0.0-1~u16.04+mcp3'

2018-10-16 20:12:46,573 [salt.state       :905 ][INFO    ][20467] Loading fresh modules for state activity
2018-10-16 20:12:46,626 [salt.state       :1941][INFO    ][20467] Completed state [python-aodhclient] at time 20:12:46.626615 duration_in_ms=4104.64
2018-10-16 20:12:46,631 [salt.state       :1770][INFO    ][20467] Running state [aodh_ssl_mysql] at time 20:12:46.630977
2018-10-16 20:12:46,631 [salt.state       :1803][INFO    ][20467] Executing state test.show_notification for [aodh_ssl_mysql]
2018-10-16 20:12:46,632 [salt.state       :290 ][INFO    ][20467] Running aodh._ssl.mysql
2018-10-16 20:12:46,633 [salt.state       :1941][INFO    ][20467] Completed state [aodh_ssl_mysql] at time 20:12:46.633417 duration_in_ms=2.44
2018-10-16 20:12:46,634 [salt.state       :1770][INFO    ][20467] Running state [aodh_ssl_rabbitmq] at time 20:12:46.634095
2018-10-16 20:12:46,634 [salt.state       :1803][INFO    ][20467] Executing state test.show_notification for [aodh_ssl_rabbitmq]
2018-10-16 20:12:46,635 [salt.state       :290 ][INFO    ][20467] Running aodh._ssl.rabbitmq
2018-10-16 20:12:46,635 [salt.state       :1941][INFO    ][20467] Completed state [aodh_ssl_rabbitmq] at time 20:12:46.635637 duration_in_ms=1.542
2018-10-16 20:12:46,639 [salt.state       :1770][INFO    ][20467] Running state [/etc/aodh/aodh.conf] at time 20:12:46.639809
2018-10-16 20:12:46,641 [salt.state       :1803][INFO    ][20467] Executing state file.managed for [/etc/aodh/aodh.conf]
2018-10-16 20:12:46,683 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/aodh.conf.Debian'
2018-10-16 20:12:46,764 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_default.conf'
2018-10-16 20:12:46,892 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_healthcheck.conf'
2018-10-16 20:12:46,912 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/_policy.conf'
2018-10-16 20:12:46,954 [salt.state       :290 ][INFO    ][20467] File changed:
--- 
+++ 
@@ -1,5 +1,4 @@
 [DEFAULT]
-log_dir = /var/log/aodh
 
 #
 # From aodh
@@ -43,120 +42,6 @@
 # Period of evaluation cycle, should be >= than configured pipeline interval
 # for collection of underlying meters. (integer value)
 #evaluation_interval = 60
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
 #
 # From oslo.messaging
 #
@@ -164,14 +49,17 @@
 # Size of RPC connection pool. (integer value)
 #rpc_conn_pool_size = 30
 
-# The pool size limit for connections expiration policy (integer value)
+# The pool size limit for connections expiration policy (integer
+# value)
 #conn_pool_min_size = 2
 
-# The time-to-live in sec of idle connections in the pool (integer value)
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
 #conn_pool_ttl = 1200
 
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
 #rpc_zmq_bind_address = *
 
 # MatchMaker driver. (string value)
@@ -184,51 +72,54 @@
 # Number of ZeroMQ contexts, defaults to 1. (integer value)
 #rpc_zmq_contexts = 1
 
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
 #rpc_zmq_topic_backlog = <None>
 
 # Directory for holding IPC sockets. (string value)
 #rpc_zmq_ipc_dir = /var/run/openstack
 
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
 #rpc_zmq_host = localhost
 
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_cast_timeout
 #zmq_linger = -1
 
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
 #rpc_poll_timeout = 1
 
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
 #zmq_target_expire = 300
 
-# Update period in seconds of a name service record about existing target.
-# (integer value)
+# Update period in seconds of a name service record about existing
+# target. (integer value)
 #zmq_target_update = 180
 
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
 #use_pub_sub = false
 
 # Use ROUTER remote proxy. (boolean value)
 #use_router_proxy = false
 
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
 #use_dynamic_connections = false
 
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
 #zmq_failover_connections = 2
 
 # Minimal port number for random ports range. (port value)
@@ -241,8 +132,8 @@
 # Maximum value: 65536
 #rpc_zmq_max_port = 65536
 
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
 #rpc_zmq_bind_port_retries = 100
 
 # Default serialization mechanism for serializing/deserializing
@@ -252,78 +143,83 @@
 # msgpack - <No description provided>
 #rpc_zmq_serialization = json
 
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
 #zmq_immediate = true
 
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
 #zmq_tcp_keepalive = -1
 
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
 #zmq_tcp_keepalive_idle = -1
 
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_cnt = -1
 
 # The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
 #zmq_tcp_keepalive_intvl = -1
 
-# Maximum number of (green) threads to work concurrently. (integer value)
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
 #rpc_thread_pool_size = 100
 
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
 #rpc_message_ttl = 300
 
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
 #rpc_use_acks = false
 
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
 #rpc_ack_timeout_base = 15
 
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
 #rpc_ack_timeout_multiplier = 2
 
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
 #rpc_retry_attempts = 3
 
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
 #subscribe_on =
 
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
 # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
 #executor_thread_pool_size = 64
 
 # Seconds to wait for a response from a call. (integer value)
 #rpc_response_timeout = 60
 
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
 #
 # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
 #
@@ -334,18 +230,135 @@
 # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
 # (string value)
 #transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 # Reason: Replaced by [DEFAULT]/transport_url
 #rpc_backend = rabbit
 
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
 #control_exchange = openstack
 
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 [api]
 
@@ -353,8 +366,12 @@
 # From aodh
 #
 
+port = 8042
+
+host = 192.168.10.32
+
 # Configuration file for WSGI definition of API. (string value)
-#paste_config = /build/aodh-icZzU4/aodh-6.0.1/aodh/api/api-paste.ini
+#paste_config = /usr/src/git/aodh/aodh/api/api-paste.ini
 
 # Authentication mode to use. Unset to disable authentication (string value)
 #auth_mode = keystone
@@ -362,10 +379,6 @@
 # Project name of resources creator in Gnocchi. (For example the Ceilometer
 # project name (string value)
 #gnocchi_external_project_owner = service
-
-# Domain name of resources creator in Gnocchi. (For example, default or
-# service_domain (string value)
-#gnocchi_external_domain_name = Default
 
 # Maximum number of alarms defined for a user. (integer value)
 #user_alarm_quota = <None>
@@ -388,6 +401,7 @@
 # evaluation won't do workload partitioning and will only function correctly if
 # a single instance of the service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between heartbeats for distributed coordination. (floating
 # point value)
@@ -406,38 +420,7 @@
 #max_retry_interval = 30
 
 
-[cors]
-
-#
-# From oslo.middleware.cors
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = GET,PUT,POST,DELETE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers = X-Auth-Token,X-Openstack-Request-Id,X-Subject-Token
-
-
 [database]
-backend = sqlalchemy
-connection = sqlite:////var/lib/aodh/sqlite.db
 
 #
 # From aodh
@@ -446,7 +429,7 @@
 # Number of seconds that alarm histories are kept in the database for (<= 0
 # means forever). (integer value)
 #alarm_history_time_to_live = -1
-
+alarm_history_time_to_live = 2592000
 #
 # From oslo.db
 #
@@ -458,66 +441,73 @@
 # Deprecated group/name - [DEFAULT]/db_backend
 #backend = sqlalchemy
 
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
+# The SQLAlchemy connection string to use to connect to the database.
+# (string value)
 # Deprecated group/name - [DEFAULT]/sql_connection
 # Deprecated group/name - [DATABASE]/sql_connection
 # Deprecated group/name - [sql]/connection
 #connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
+connection = mysql+pymysql://aodh:opnfv_secret@192.168.10.23/aodh?charset=utf8
+# The SQLAlchemy connection string to use to connect to the slave
+# database. (string value)
 #slave_connection = <None>
 
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
+# The SQL mode to be used for MySQL sessions. This option, including
+# the default, overrides any server-set SQL mode. To use whatever SQL
+# mode is set by the server configuration, set this to no value.
+# Example: mysql_sql_mode= (string value)
 #mysql_sql_mode = TRADITIONAL
 
-# If True, transparently enables support for handling MySQL Cluster (NDB).
-# (boolean value)
+# If True, transparently enables support for handling MySQL Cluster
+# (NDB). (boolean value)
 #mysql_enable_ndb = false
 
-# Connections which have been present in the connection pool longer than this
-# number of seconds will be replaced with a new one the next time they are
-# checked out from the pool. (integer value)
+# Connections which have been present in the connection pool longer
+# than this number of seconds will be replaced with a new one the next
+# time they are checked out from the pool. (integer value)
 # Deprecated group/name - [DATABASE]/idle_timeout
 # Deprecated group/name - [database]/idle_timeout
 # Deprecated group/name - [DEFAULT]/sql_idle_timeout
 # Deprecated group/name - [DATABASE]/sql_idle_timeout
 # Deprecated group/name - [sql]/idle_timeout
 #connection_recycle_time = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
+connection_recycle_time = 300
+
+# Minimum number of SQL connections to keep open in a pool. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_min_pool_size
 # Deprecated group/name - [DATABASE]/sql_min_pool_size
 #min_pool_size = 1
 
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
+# Maximum number of SQL connections to keep open in a pool. Setting a
+# value of 0 indicates no limit. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_pool_size
 # Deprecated group/name - [DATABASE]/sql_max_pool_size
 #max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
+max_pool_size = 10
+
+# Maximum number of database connection retries during startup. Set to
+# -1 to specify an infinite retry count. (integer value)
 # Deprecated group/name - [DEFAULT]/sql_max_retries
 # Deprecated group/name - [DATABASE]/sql_max_retries
 #max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
+max_retries = -1
+
+# Interval between retries of opening a SQL connection. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_retry_interval
 # Deprecated group/name - [DATABASE]/reconnect_interval
 #retry_interval = 10
 
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
+# If set, use this value for max_overflow with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DEFAULT]/sql_max_overflow
 # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
 #max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
+max_overflow = 30
+
+# Verbosity of SQL debugging information: 0=None, 100=Everything.
+# (integer value)
 # Minimum value: 0
 # Maximum value: 100
 # Deprecated group/name - [DEFAULT]/sql_connection_debug
@@ -527,28 +517,39 @@
 # Deprecated group/name - [DEFAULT]/sql_connection_trace
 #connection_trace = false
 
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
+# If set, use this value for pool_timeout with SQLAlchemy. (integer
+# value)
 # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
 #pool_timeout = <None>
 
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
+# Enable the experimental use of database reconnect on connection
+# lost. (boolean value)
 #use_db_reconnect = false
 
 # Seconds between retries of a database transaction. (integer value)
 #db_retry_interval = 1
 
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
+# If True, increases the interval between retries of a database
+# operation up to db_max_retry_interval. (boolean value)
 #db_inc_retry_interval = true
 
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
+# If db_inc_retry_interval is set, the maximum seconds between retries
+# of a database operation. (integer value)
 #db_max_retry_interval = 10
 
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
+# Maximum retries in case of connection error or deadlock error before
+# error is raised. Set to -1 to specify an infinite retry count.
+# (integer value)
 #db_max_retries = 20
+
+#
+# From oslo.db.concurrency
+#
+
+# Enable the experimental use of thread pooling for all DB API calls
+# (boolean value)
+# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
+#use_tpool = false
 
 
 [evaluator]
@@ -562,36 +563,291 @@
 #workers = 1
 
 
+[listener]
+
+#
+# From aodh
+#
+
+# Number of workers for listener service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# The topic that aodh uses for event alarm evaluation. (string value)
+#event_alarm_topic = alarm.all
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[notifier]
+
+#
+# From aodh
+#
+
+# Number of workers for notifier service. default value is 1. (integer value)
+# Minimum value: 1
+#workers = 1
+
+# Number of notification messages to wait before dispatching them. (integer
+# value)
+#batch_size = 1
+
+# Number of seconds to wait before dispatching samples when batch_size is not
+# reached (None means indefinitely). (integer value)
+#batch_timeout = <None>
+
+
+[service_credentials]
+
+#
+# From aodh
+#
+
+# Region name to use for OpenStack service endpoints. (string value)
+# Deprecated group/name - [service_credentials]/os_region_name
+#region_name = <None>
+
+# Type of endpoint in Identity service catalog to use for communication with
+# OpenStack services. (string value)
+# Possible values:
+# public - <No description provided>
+# internal - <No description provided>
+# admin - <No description provided>
+# auth - <No description provided>
+# publicURL - <No description provided>
+# internalURL - <No description provided>
+# adminURL - <No description provided>
+# Deprecated group/name - [service_credentials]/os_endpoint_type
+#interface = public
+
+#
+# From aodh-auth
+#
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
+
+# Authentication URL (string value)
+#auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
+
+# Scope for system operations (string value)
+#system_scope = <None>
+
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
+
+# Trust ID (string value)
+#trust_id = <None>
+
+# User's domain id (string value)
+#user_domain_id = <None>
+user_domain_id = default
+
+# User's domain name (string value)
+#user_domain_name = <None>
+
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh
+
+[service_types]
+
+#
+# From aodh
+#
+
+# Message queue service type. (string value)
+#zaqar = messaging
+
+[cors]
+
+[oslo_middleware]
+#
+# From oslo.middleware
+#
+
+# The maximum body size for each  request, in bytes. (integer value)
+# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
+# Deprecated group/name - [DEFAULT]/max_request_body_size
+#max_request_body_size = 114688
+
+# DEPRECATED: The HTTP Header that will be used to determine what the
+# original request protocol scheme was, even if it was hidden by a SSL
+# termination proxy. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#secure_proxy_ssl_header = X-Forwarded-Proto
+
+# Whether the application is behind a proxy or not. This determines if
+# the middleware should parse the headers or not. (boolean value)
+enable_proxy_headers_parsing = True
+
 [healthcheck]
-
-#
-# From oslo.middleware.healthcheck
-#
-
-# DEPRECATED: The path to respond to healtcheck requests on. (string value)
+#
+# From oslo.middleware
+#
+
+# DEPRECATED: The path to respond to healtcheck requests on. (string
+# value)
 # This option is deprecated for removal.
 # Its value may be silently ignored in the future.
 #path = /healthcheck
 
-# Show more detailed information as part of the response (boolean value)
+# Show more detailed information as part of the response (boolean
+# value)
 #detailed = false
 
 # Additional backends that can perform health checks and report that
 # information back as part of a request. (list value)
 #backends =
 
-# Check the presence of a file to determine if an application is running on a
-# port. Used by DisableByFileHealthcheck plugin. (string value)
+# Check the presence of a file to determine if an application is
+# running on a port. Used by DisableByFileHealthcheck plugin. (string
+# value)
 #disable_by_file_path = <None>
 
-# Check the presence of a file based on a port to determine if an application
-# is running on a port. Expects a "port:path" list of strings. Used by
-# DisableByFilesPortsHealthcheck plugin. (list value)
+# Check the presence of a file based on a port to determine if an
+# application is running on a port. Expects a "port:path" list of
+# strings. Used by DisableByFilesPortsHealthcheck plugin. (list value)
 #disable_by_file_paths =
 
 
+[oslo_policy]
+#
+# From oslo.policy
+#
+
+# This option controls whether or not to enforce scope when evaluating
+# policies. If ``True``, the scope of the token used in the request is
+# compared to the ``scope_types`` of the policy being enforced. If the
+# scopes do not match, an ``InvalidScope`` exception will be raised.
+# If ``False``, a message will be logged informing operators that
+# policies are being invoked with mismatching scope. (boolean value)
+#enforce_scope = false
+
+# The file that defines policies. (string value)
+#policy_file = policy.json
+policy_file = /etc/aodh/policy.json
+
+# Default rule. Enforced when a requested rule is not found. (string
+# value)
+#policy_default_rule = default
+
+# Directories where policy configuration files are stored. They can be
+# relative to any directory in the search path defined by the
+# config_dir option, or absolute paths. The file defined by
+# policy_file must exist for these directories to be searched.
+# Missing or empty directories are ignored. (multi valued)
+#policy_dirs = policy.d
+
+# Content Type to send and receive data for REST based policy check
+# (string value)
+# Possible values:
+# application/x-www-form-urlencoded - <No description provided>
+# application/json - <No description provided>
+#remote_content_type = application/x-www-form-urlencoded
+
+# server identity verification for REST based policy check (boolean
+# value)
+#remote_ssl_verify_server_crt = false
+
+# Absolute path to ca cert file for REST based policy check (string
+# value)
+#remote_ssl_ca_crt_file = <None>
+
+# Absolute path to client cert for REST based policy check (string
+# value)
+#remote_ssl_client_crt_file = <None>
+
+# Absolute path client key file REST based policy check (string value)
+#remote_ssl_client_key_file = <None>
+
 [keystone_authtoken]
-
 #
 # From keystonemiddleware.auth_token
 #
@@ -606,6 +862,7 @@
 # value)
 # Deprecated group/name - [keystone_authtoken]/auth_uri
 #www_authenticate_uri = <None>
+www_authenticate_uri = http://192.168.10.35:5000
 
 # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not
 # be an "admin" endpoint, as it should be accessible by all end users.
@@ -621,6 +878,7 @@
 # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri
 # and will be removed in the S  release.
 #auth_uri = <None>
+auth_uri = http://192.168.10.35:5000
 
 # API version of the admin Identity API endpoint. (string value)
 #auth_version = <None>
@@ -658,6 +916,7 @@
 
 # The region in which the identity server can be found. (string value)
 #region_name = <None>
+region_name = RegionOne
 
 # DEPRECATED: Directory used to cache files related to PKI tokens. This option
 # has been deprecated in the Ocata release and will be removed in the P
@@ -775,995 +1034,115 @@
 # possible. (boolean value)
 #service_token_roles_required = false
 
-# Prefix to prepend at the beginning of the path. Deprecated, use identity_uri.
-# (string value)
-#auth_admin_prefix =
-
-# Host providing the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-#auth_host = 127.0.0.1
-
-# Port of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (integer value)
-#auth_port = 35357
-
-# Protocol of the admin Identity API endpoint. Deprecated, use identity_uri.
-# (string value)
-# Possible values:
-# http - <No description provided>
-# https - <No description provided>
-#auth_protocol = https
-
-# Complete admin Identity API endpoint. This should specify the unversioned
-# root endpoint e.g. https://localhost:35357/ (string value)
-#identity_uri = <None>
-
-# This option is deprecated and may be removed in a future release. Single
-# shared secret with the Keystone configuration used for bootstrapping a
-# Keystone installation, or otherwise bypassing the normal authentication
-# process. This option should not be used, use `admin_user` and
-# `admin_password` instead. (string value)
-#admin_token = <None>
-
-# Service username. (string value)
-#admin_user = <None>
-
-# Service user password. (string value)
-#admin_password = <None>
-
-# Service tenant name. (string value)
-#admin_tenant_name = admin
-
 # Authentication type to load (string value)
 # Deprecated group/name - [keystone_authtoken]/auth_plugin
 #auth_type = <None>
+auth_type = password
 
 # Config Section from which to load plugin specific options (string value)
 #auth_section = <None>
 
-
-[listener]
-
-#
-# From aodh
-#
-
-# Number of workers for listener service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# The topic that aodh uses for event alarm evaluation. (string value)
-#event_alarm_topic = alarm.all
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
-
-
-[notifier]
-
-#
-# From aodh
-#
-
-# Number of workers for notifier service. default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Number of notification messages to wait before dispatching them. (integer
-# value)
-#batch_size = 1
-
-# Number of seconds to wait before dispatching samples when batch_size is not
-# reached (None means indefinitely). (integer value)
-#batch_timeout = <None>
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
+# Name of nova region to use. Useful if keystone manages more than one region.
 # (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware.http_proxy_to_wsgi
-#
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# This option controls whether or not to enforce scope when evaluating
-# policies. If ``True``, the scope of the token used in the request is compared
-# to the ``scope_types`` of the policy being enforced. If the scopes do not
-# match, an ``InvalidScope`` exception will be raised. If ``False``, a message
-# will be logged informing operators that policies are being invoked with
-# mismatching scope. (boolean value)
-#enforce_scope = false
-
-# The file that defines policies. (string value)
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-#policy_dirs = policy.d
-
-# Content Type to send and receive data for REST based policy check (string
-# value)
-# Possible values:
-# application/x-www-form-urlencoded - <No description provided>
-# application/json - <No description provided>
-#remote_content_type = application/x-www-form-urlencoded
-
-# server identity verification for REST based policy check (boolean value)
-#remote_ssl_verify_server_crt = false
-
-# Absolute path to ca cert file for REST based policy check (string value)
-#remote_ssl_ca_crt_file = <None>
-
-# Absolute path to client cert for REST based policy check (string value)
-#remote_ssl_client_crt_file = <None>
-
-# Absolute path client key file REST based policy check (string value)
-#remote_ssl_client_key_file = <None>
-
-
-[service_credentials]
-
-#
-# From aodh
-#
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [service_credentials]/os_region_name
 #region_name = <None>
-
-# Type of endpoint in Identity service catalog to use for communication with
-# OpenStack services. (string value)
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
 # Possible values:
 # public - <No description provided>
+# admin - <No description provided>
 # internal - <No description provided>
-# admin - <No description provided>
-# auth - <No description provided>
-# publicURL - <No description provided>
-# internalURL - <No description provided>
-# adminURL - <No description provided>
-# Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
-
-#
-# From aodh-auth
-#
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-
-[service_types]
-
-#
-# From aodh
-#
-
-# Message queue service type. (string value)
-#zaqar = messaging
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = aodh

2018-10-16 20:12:46,965 [salt.state       :1941][INFO    ][20467] Completed state [/etc/aodh/aodh.conf] at time 20:12:46.965368 duration_in_ms=325.559
2018-10-16 20:12:46,966 [salt.state       :1770][INFO    ][20467] Running state [/etc/default/aodh-evaluator] at time 20:12:46.966215
2018-10-16 20:12:46,966 [salt.state       :1803][INFO    ][20467] Executing state file.managed for [/etc/default/aodh-evaluator]
2018-10-16 20:12:47,008 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'aodh/files/default'
2018-10-16 20:12:47,037 [salt.state       :290 ][INFO    ][20467] File changed:
New file
2018-10-16 20:12:47,037 [salt.state       :1941][INFO    ][20467] Completed state [/etc/default/aodh-evaluator] at time 20:12:47.037653 duration_in_ms=71.438
2018-10-16 20:12:47,038 [salt.state       :1770][INFO    ][20467] Running state [/etc/default/aodh-notifier] at time 20:12:47.038081
2018-10-16 20:12:47,038 [salt.state       :1803][INFO    ][20467] Executing state file.managed for [/etc/default/aodh-notifier]
2018-10-16 20:12:47,079 [salt.state       :290 ][INFO    ][20467] File changed:
New file
2018-10-16 20:12:47,084 [salt.state       :1941][INFO    ][20467] Completed state [/etc/default/aodh-notifier] at time 20:12:47.084595 duration_in_ms=46.514
2018-10-16 20:12:47,085 [salt.state       :1770][INFO    ][20467] Running state [/etc/default/aodh-listener] at time 20:12:47.085071
2018-10-16 20:12:47,085 [salt.state       :1803][INFO    ][20467] Executing state file.managed for [/etc/default/aodh-listener]
2018-10-16 20:12:47,116 [salt.state       :290 ][INFO    ][20467] File changed:
New file
2018-10-16 20:12:47,116 [salt.state       :1941][INFO    ][20467] Completed state [/etc/default/aodh-listener] at time 20:12:47.116398 duration_in_ms=31.327
2018-10-16 20:12:47,117 [salt.state       :1770][INFO    ][20467] Running state [aodh-dbsync] at time 20:12:47.117922
2018-10-16 20:12:47,118 [salt.state       :1803][INFO    ][20467] Executing state cmd.run for [aodh-dbsync]
2018-10-16 20:12:47,127 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command 'aodh-dbsync' in directory '/root'
2018-10-16 20:12:48,690 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201248671022
2018-10-16 20:12:48,718 [salt.minion      :1431][INFO    ][27096] Starting a new job with PID 27096
2018-10-16 20:12:48,743 [salt.minion      :1708][INFO    ][27096] Returning information for job: 20181016201248671022
2018-10-16 20:12:49,922 [salt.state       :290 ][INFO    ][20467] {'pid': 27086, 'retcode': 0, 'stderr': '', 'stdout': '2018-10-16 20:12:49.758 27087 INFO alembic.runtime.migration [-] Context impl MySQLImpl.\n2018-10-16 20:12:49.760 27087 INFO alembic.runtime.migration [-] Will assume non-transactional DDL.'}
2018-10-16 20:12:49,922 [salt.state       :1941][INFO    ][20467] Completed state [aodh-dbsync] at time 20:12:49.922589 duration_in_ms=2804.666
2018-10-16 20:12:49,931 [salt.state       :1770][INFO    ][20467] Running state [/usr/bin/aodh-expirer] at time 20:12:49.931510
2018-10-16 20:12:49,931 [salt.state       :1803][INFO    ][20467] Executing state cron.present for [/usr/bin/aodh-expirer]
2018-10-16 20:12:49,933 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command 'crontab -u aodh -l' in directory '/root'
2018-10-16 20:12:49,956 [salt.loaded.int.module.cmdmod:722 ][ERROR   ][20467] Command '['crontab', '-u', 'aodh', '-l']' failed with return code: 1
2018-10-16 20:12:49,956 [salt.loaded.int.module.cmdmod:726 ][ERROR   ][20467] stderr: no crontab for aodh

2018-10-16 20:12:49,957 [salt.loaded.int.module.cmdmod:728 ][ERROR   ][20467] retcode: 1
2018-10-16 20:12:49,959 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command 'crontab -u aodh /tmp/__salt.tmp.pMV4na' in directory '/root'
2018-10-16 20:12:49,981 [salt.state       :290 ][INFO    ][20467] {'aodh': '/usr/bin/aodh-expirer'}
2018-10-16 20:12:49,983 [salt.state       :1941][INFO    ][20467] Completed state [/usr/bin/aodh-expirer] at time 20:12:49.982941 duration_in_ms=51.43
2018-10-16 20:12:49,984 [salt.state       :1770][INFO    ][20467] Running state [/etc/apache2/sites-available/aodh-api.conf] at time 20:12:49.984227
2018-10-16 20:12:49,984 [salt.state       :1803][INFO    ][20467] Executing state file.managed for [/etc/apache2/sites-available/aodh-api.conf]
2018-10-16 20:12:50,017 [salt.fileclient  :1215][INFO    ][20467] Fetching file from saltenv 'base', ** done ** 'aodh/files/queens/apache-aodh.apache2.conf.Debian'
2018-10-16 20:12:50,061 [salt.state       :290 ][INFO    ][20467] File changed:
--- 
+++ 
@@ -1,21 +1,8 @@
-# Copyright (c) 2013 New Dream Network, LLC (DreamHost)
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may
-# not use this file except in compliance with the License. You may obtain
-# a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations
-# under the License.
 
-Listen 8042
+Listen 192.168.10.32:8042
 
 <VirtualHost *:8042>
-    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh display-name=%{GROUP}
+    WSGIDaemonProcess aodh-api processes=2 threads=10 user=aodh group=aodh display-name=%{GROUP}
     WSGIProcessGroup aodh-api
     WSGIScriptAlias / /usr/share/aodh/app.wsgi
     WSGIApplicationGroup %{GLOBAL}
@@ -23,5 +10,5 @@
         ErrorLogFormat "%{cu}t %M"
     </IfVersion>
     ErrorLog /var/log/apache2/aodh_error.log
-    CustomLog /var/log/apache2/aodh_access.log combined
+    CustomLog /var/log/apache2/aodh_access.log "%v:%p %h %l %u %t \"%r\" %>s %D %O \"%{Referer}i\" \"%{User-Agent}i\""
 </VirtualHost>

2018-10-16 20:12:50,061 [salt.state       :1941][INFO    ][20467] Completed state [/etc/apache2/sites-available/aodh-api.conf] at time 20:12:50.061401 duration_in_ms=77.175
2018-10-16 20:12:50,061 [salt.state       :1770][INFO    ][20467] Running state [/etc/apache2/sites-enabled/aodh-api.conf] at time 20:12:50.061655
2018-10-16 20:12:50,061 [salt.state       :1803][INFO    ][20467] Executing state file.symlink for [/etc/apache2/sites-enabled/aodh-api.conf]
2018-10-16 20:12:50,072 [salt.state       :290 ][INFO    ][20467] {'new': '/etc/apache2/sites-enabled/aodh-api.conf'}
2018-10-16 20:12:50,072 [salt.state       :1941][INFO    ][20467] Completed state [/etc/apache2/sites-enabled/aodh-api.conf] at time 20:12:50.072663 duration_in_ms=11.008
2018-10-16 20:12:50,769 [salt.state       :1770][INFO    ][20467] Running state [apache2] at time 20:12:50.769413
2018-10-16 20:12:50,770 [salt.state       :1803][INFO    ][20467] Executing state service.running for [apache2]
2018-10-16 20:12:50,772 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'status', 'apache2.service', '-n', '0'] in directory '/root'
2018-10-16 20:12:50,809 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:12:50,835 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-enabled', 'apache2.service'] in directory '/root'
2018-10-16 20:12:50,864 [salt.state       :290 ][INFO    ][20467] The service apache2 is already running
2018-10-16 20:12:50,864 [salt.state       :1941][INFO    ][20467] Completed state [apache2] at time 20:12:50.864565 duration_in_ms=95.153
2018-10-16 20:12:50,865 [salt.state       :1770][INFO    ][20467] Running state [apache2] at time 20:12:50.865318
2018-10-16 20:12:50,865 [salt.state       :1803][INFO    ][20467] Executing state service.mod_watch for [apache2]
2018-10-16 20:12:50,866 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'apache2.service'] in directory '/root'
2018-10-16 20:12:50,893 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'apache2.service'] in directory '/root'
2018-10-16 20:12:53,281 [salt.state       :290 ][INFO    ][20467] {'apache2': True}
2018-10-16 20:12:53,282 [salt.state       :1941][INFO    ][20467] Completed state [apache2] at time 20:12:53.282807 duration_in_ms=2417.487
2018-10-16 20:12:53,285 [salt.state       :1770][INFO    ][20467] Running state [aodh-evaluator] at time 20:12:53.285830
2018-10-16 20:12:53,286 [salt.state       :1803][INFO    ][20467] Executing state service.running for [aodh-evaluator]
2018-10-16 20:12:53,293 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'status', 'aodh-evaluator.service', '-n', '0'] in directory '/root'
2018-10-16 20:12:53,320 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 20:12:53,346 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-enabled', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 20:12:53,366 [salt.state       :290 ][INFO    ][20467] The service aodh-evaluator is already running
2018-10-16 20:12:53,368 [salt.state       :1941][INFO    ][20467] Completed state [aodh-evaluator] at time 20:12:53.368234 duration_in_ms=82.403
2018-10-16 20:12:53,369 [salt.state       :1770][INFO    ][20467] Running state [aodh-evaluator] at time 20:12:53.368986
2018-10-16 20:12:53,369 [salt.state       :1803][INFO    ][20467] Executing state service.mod_watch for [aodh-evaluator]
2018-10-16 20:12:53,370 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 20:12:53,394 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-evaluator.service'] in directory '/root'
2018-10-16 20:12:53,576 [salt.state       :290 ][INFO    ][20467] {'aodh-evaluator': True}
2018-10-16 20:12:53,578 [salt.state       :1941][INFO    ][20467] Completed state [aodh-evaluator] at time 20:12:53.578308 duration_in_ms=209.323
2018-10-16 20:12:53,580 [salt.state       :1770][INFO    ][20467] Running state [aodh-notifier] at time 20:12:53.580669
2018-10-16 20:12:53,581 [salt.state       :1803][INFO    ][20467] Executing state service.running for [aodh-notifier]
2018-10-16 20:12:53,582 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'status', 'aodh-notifier.service', '-n', '0'] in directory '/root'
2018-10-16 20:12:53,626 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-16 20:12:53,666 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-enabled', 'aodh-notifier.service'] in directory '/root'
2018-10-16 20:12:53,695 [salt.state       :290 ][INFO    ][20467] The service aodh-notifier is already running
2018-10-16 20:12:53,695 [salt.state       :1941][INFO    ][20467] Completed state [aodh-notifier] at time 20:12:53.695823 duration_in_ms=115.154
2018-10-16 20:12:53,696 [salt.state       :1770][INFO    ][20467] Running state [aodh-notifier] at time 20:12:53.696347
2018-10-16 20:12:53,697 [salt.state       :1803][INFO    ][20467] Executing state service.mod_watch for [aodh-notifier]
2018-10-16 20:12:53,705 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'aodh-notifier.service'] in directory '/root'
2018-10-16 20:12:53,761 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-notifier.service'] in directory '/root'
2018-10-16 20:12:58,837 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201258818526
2018-10-16 20:12:58,860 [salt.minion      :1431][INFO    ][27367] Starting a new job with PID 27367
2018-10-16 20:12:58,898 [salt.minion      :1708][INFO    ][27367] Returning information for job: 20181016201258818526
2018-10-16 20:13:09,005 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201308990632
2018-10-16 20:13:09,030 [salt.minion      :1431][INFO    ][27387] Starting a new job with PID 27387
2018-10-16 20:13:09,063 [salt.state       :290 ][INFO    ][20467] {'aodh-notifier': True}
2018-10-16 20:13:09,065 [salt.state       :1941][INFO    ][20467] Completed state [aodh-notifier] at time 20:13:09.064051 duration_in_ms=15367.703
2018-10-16 20:13:09,068 [salt.state       :1770][INFO    ][20467] Running state [aodh-listener] at time 20:13:09.068788
2018-10-16 20:13:09,071 [salt.state       :1803][INFO    ][20467] Executing state service.running for [aodh-listener]
2018-10-16 20:13:09,072 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'status', 'aodh-listener.service', '-n', '0'] in directory '/root'
2018-10-16 20:13:09,098 [salt.minion      :1708][INFO    ][27387] Returning information for job: 20181016201308990632
2018-10-16 20:13:09,134 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-16 20:13:09,157 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-enabled', 'aodh-listener.service'] in directory '/root'
2018-10-16 20:13:09,178 [salt.state       :290 ][INFO    ][20467] The service aodh-listener is already running
2018-10-16 20:13:09,178 [salt.state       :1941][INFO    ][20467] Completed state [aodh-listener] at time 20:13:09.178609 duration_in_ms=109.82
2018-10-16 20:13:09,178 [salt.state       :1770][INFO    ][20467] Running state [aodh-listener] at time 20:13:09.178926
2018-10-16 20:13:09,179 [salt.state       :1803][INFO    ][20467] Executing state service.mod_watch for [aodh-listener]
2018-10-16 20:13:09,180 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemctl', 'is-active', 'aodh-listener.service'] in directory '/root'
2018-10-16 20:13:09,201 [salt.loaded.int.module.cmdmod:395 ][INFO    ][20467] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'aodh-listener.service'] in directory '/root'
2018-10-16 20:13:19,038 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201319019350
2018-10-16 20:13:19,062 [salt.minion      :1431][INFO    ][27445] Starting a new job with PID 27445
2018-10-16 20:13:19,089 [salt.minion      :1708][INFO    ][27445] Returning information for job: 20181016201319019350
2018-10-16 20:13:24,316 [salt.state       :290 ][INFO    ][20467] {'aodh-listener': True}
2018-10-16 20:13:24,317 [salt.state       :1941][INFO    ][20467] Completed state [aodh-listener] at time 20:13:24.317404 duration_in_ms=15138.477
2018-10-16 20:13:24,323 [salt.minion      :1708][INFO    ][20467] Returning information for job: 20181016201152828949
2018-10-16 20:14:57,443 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command state.sls with jid 20181016201457430435
2018-10-16 20:14:57,467 [salt.minion      :1431][INFO    ][27508] Starting a new job with PID 27508
2018-10-16 20:15:02,540 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201502527616
2018-10-16 20:15:02,572 [salt.minion      :1431][INFO    ][27513] Starting a new job with PID 27513
2018-10-16 20:15:02,602 [salt.minion      :1708][INFO    ][27513] Returning information for job: 20181016201502527616
2018-10-16 20:15:06,647 [salt.state       :905 ][INFO    ][27508] Loading fresh modules for state activity
2018-10-16 20:15:06,720 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/init.sls'
2018-10-16 20:15:06,758 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/server.sls'
2018-10-16 20:15:09,057 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-central] at time 20:15:09.057772
2018-10-16 20:15:09,059 [salt.state       :1803][INFO    ][27508] Executing state pkg.installed for [ceilometer-agent-central]
2018-10-16 20:15:09,061 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:15:09,732 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['apt-cache', '-q', 'policy', 'ceilometer-agent-central'] in directory '/root'
2018-10-16 20:15:09,918 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['apt-get', '-q', 'update'] in directory '/root'
2018-10-16 20:15:12,520 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:15:12,572 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-central'] in directory '/root'
2018-10-16 20:15:12,652 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201512638292
2018-10-16 20:15:12,681 [salt.minion      :1431][INFO    ][27882] Starting a new job with PID 27882
2018-10-16 20:15:12,708 [salt.minion      :1708][INFO    ][27882] Returning information for job: 20181016201512638292
2018-10-16 20:15:22,880 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201522858686
2018-10-16 20:15:22,905 [salt.minion      :1431][INFO    ][28560] Starting a new job with PID 28560
2018-10-16 20:15:22,935 [salt.minion      :1708][INFO    ][28560] Returning information for job: 20181016201522858686
2018-10-16 20:15:33,085 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201533065526
2018-10-16 20:15:33,111 [salt.minion      :1431][INFO    ][29818] Starting a new job with PID 29818
2018-10-16 20:15:33,133 [salt.minion      :1708][INFO    ][29818] Returning information for job: 20181016201533065526
2018-10-16 20:15:36,792 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:15:36,861 [salt.state       :290 ][INFO    ][27508] Made the following changes:
'libbluetooth3' changed from 'absent' to '5.37-0ubuntu5.1'
'python-pysnmp4-mibs' changed from 'absent' to '0.1.3-1'
'libavahi-common3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'ibverbs-providers' changed from 'absent' to '17.1-1~cloud0'
'qemu-keymaps' changed from 'absent' to '1'
'qemu-kvm-spice' changed from 'absent' to '1'
'libpulse0' changed from 'absent' to '1:8.0-0ubuntu3.10'
'libyajl2' changed from 'absent' to '2.1.0-2'
'libnss3' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libasyncns0' changed from 'absent' to '0.8-5build1'
'libaugeas0' changed from 'absent' to '1.4.0-0ubuntu1.1'
'libmthca1' changed from 'absent' to '1'
'libpciaccess0' changed from 'absent' to '0.13.4-1'
'libfdt1' changed from 'absent' to '1.4.2-1.2~u16.04+mcp2'
'python-jsonpath-rw' changed from 'absent' to '1.4.0-1'
'augeas-lenses' changed from 'absent' to '1.4.0-0ubuntu1.1'
'qemu-system-x86' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-twisted-bin' changed from 'absent' to '16.0.0-1ubuntu0.2'
'ipxe-qemu' changed from 'absent' to '1.0.0+git-20180124.fbe8c52d-0.2.1~u16.04+mcp1'
'libsndfile1' changed from 'absent' to '1.0.25-10ubuntu0.16.04.1'
'seabios' changed from 'absent' to '1.10.2-1.1~u16.04+mcp2'
'libaio1' changed from 'absent' to '0.3.110-2'
'libxml2-utils' changed from 'absent' to '2.9.3+dfsg1-1ubuntu0.6'
'python-pysnmp-common' changed from 'absent' to '1'
'libvorbis0a' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libspice-server1' changed from 'absent' to '0.12.6-4ubuntu0.3'
'python-pam' changed from 'absent' to '0.4.2-13.2ubuntu2'
'libipathverbs1' changed from 'absent' to '1'
'python-twisted' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libcaca0' changed from 'absent' to '0.99.beta19-2build2~gcc5.2'
'libnss3-nssdb' changed from 'absent' to '2:3.28.4-0ubuntu0.16.04.3'
'libsmi2ldbl' changed from 'absent' to '0.4.8+dfsg2-11'
'libmlx4-1' changed from 'absent' to '1'
'libvirt0' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'qemu-system-common' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'qemu-system-i386' changed from 'absent' to '1'
'ceilometer-agent-central' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'qemu-system-x86-64' changed from 'absent' to '1'
'python2.7-twisted-core' changed from 'absent' to '1'
'libvirt-daemon-driver-storage-rbd' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'python-libvirt' changed from 'absent' to '3.5.0-1.1~u16.04+mcp3'
'libmlx5-1' changed from 'absent' to '1'
'libusbredirparser1' changed from 'absent' to '0.7.1-1'
'ipxe-qemu-256k-compat-efi-roms' changed from 'absent' to '1.0.0+git-20150424.a25a16d-0.2~u16.04+mcp1'
'python-pysnmp4' changed from 'absent' to '4.2.5-1'
'python-pysnmp2' changed from 'absent' to '1'
'libpixman-1-0' changed from 'absent' to '0.33.6-1'
'libopus0' changed from 'absent' to '1.1.2-1ubuntu1'
'libnspr4' changed from 'absent' to '2:4.13.1-0ubuntu0.16.04.1'
'qemu-kvm' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'python-oslo.rootwrap' changed from 'absent' to '5.13.0-1.0~u16.04+mcp6'
'libavahi-client3' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-twisted-core' changed from 'absent' to '16.0.0-1ubuntu0.2'
'libasound2' changed from 'absent' to '1.1.0-0ubuntu1'
'ceilometer-common' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-os-xenapi' changed from 'absent' to '0.3.1-1.0~u16.04+mcp1'
'libxen-4.6' changed from 'absent' to '4.6.5-0ubuntu1.4'
'libxenstore3.0' changed from 'absent' to '4.6.5-0ubuntu1.4'
'python-service-identity' changed from 'absent' to '16.0.0-2'
'libcacard0' changed from 'absent' to '1:2.5.0-2'
'libsdl1.2debian' changed from 'absent' to '1.2.15+dfsg1-3'
'libiscsi2' changed from 'absent' to '1.12.0-2'
'libvorbisenc2' changed from 'absent' to '1.3.5-3ubuntu0.2'
'libibverbs1' changed from 'absent' to '17.1-1~cloud0'
'smitools' changed from 'absent' to '0.4.8+dfsg2-11'
'libnes1' changed from 'absent' to '1'
'librados2' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'libcxgb3-1' changed from 'absent' to '1'
'msr-tools' changed from 'absent' to '1.3-2'
'libogg0' changed from 'absent' to '1.3.2-1'
'libasound2-data' changed from 'absent' to '1.1.0-0ubuntu1'
'librbd1' changed from 'absent' to '12.2.7-0ubuntu0.18.04.1~cloud0'
'librdmacm1' changed from 'absent' to '17.1-1~cloud0'
'qemu-block-extra' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'sharutils' changed from 'absent' to '1:4.15.2-1ubuntu0.1'
'kvm' changed from 'absent' to '1'
'python-pyasn1-modules' changed from 'absent' to '0.0.7-0.1'
'qemu-utils' changed from 'absent' to '1:2.11+dfsg-1ubuntu7.5~cloud0'
'libavahi-common-data' changed from 'absent' to '0.6.32~rc+dfsg-1ubuntu2.2'
'python-ceilometer' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'
'python-attr' changed from 'absent' to '17.4.0-2~cloud0'
'libbrlapi0.6' changed from 'absent' to '5.3.1-2ubuntu2.1'
'python2.7-twisted' changed from 'absent' to '1'
'libnetcf1' changed from 'absent' to '1:0.2.8-1ubuntu1'
'python-serial' changed from 'absent' to '3.0.1-1'
'libflac8' changed from 'absent' to '1.3.1-4'
'python-oslo-rootwrap' changed from 'absent' to '1'
'python-jsonpath-rw-ext' changed from 'absent' to '1.1.3-1~cloud0'
'python2.7-twisted-bin' changed from 'absent' to '1'
'python-pysnmp4-apps' changed from 'absent' to '0.3.2-1'
'libvirt-daemon' changed from 'absent' to '4.0.0-1ubuntu8.5~cloud0'
'cpu-checker' changed from 'absent' to '0.7-0ubuntu7'

2018-10-16 20:15:36,902 [salt.state       :905 ][INFO    ][27508] Loading fresh modules for state activity
2018-10-16 20:15:37,149 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-central] at time 20:15:37.149481 duration_in_ms=28091.709
2018-10-16 20:15:37,157 [salt.state       :1770][INFO    ][27508] Running state [python-ceilometerclient] at time 20:15:37.157406
2018-10-16 20:15:37,157 [salt.state       :1803][INFO    ][27508] Executing state pkg.installed for [python-ceilometerclient]
2018-10-16 20:15:38,131 [salt.state       :290 ][INFO    ][27508] All specified packages are already installed
2018-10-16 20:15:38,132 [salt.state       :1941][INFO    ][27508] Completed state [python-ceilometerclient] at time 20:15:38.132440 duration_in_ms=975.033
2018-10-16 20:15:38,133 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-notification] at time 20:15:38.133107
2018-10-16 20:15:38,134 [salt.state       :1803][INFO    ][27508] Executing state pkg.installed for [ceilometer-agent-notification]
2018-10-16 20:15:38,170 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg', '--get-selections', '*'] in directory '/root'
2018-10-16 20:15:38,216 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'apt-get', '-q', '-y', '-o', 'DPkg::Options::=--force-confold', '-o', 'DPkg::Options::=--force-confdef', 'install', 'ceilometer-agent-notification'] in directory '/root'
2018-10-16 20:15:42,281 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['dpkg-query', '--showformat', '${Status} ${Package} ${Version} ${Architecture}', '-W'] in directory '/root'
2018-10-16 20:15:42,345 [salt.state       :290 ][INFO    ][27508] Made the following changes:
'ceilometer-agent-notification' changed from 'absent' to '1:10.0.1-2~u16.04+mcp1'

2018-10-16 20:15:42,385 [salt.state       :905 ][INFO    ][27508] Loading fresh modules for state activity
2018-10-16 20:15:42,433 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-notification] at time 20:15:42.433205 duration_in_ms=4300.097
2018-10-16 20:15:42,439 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/ceilometer.conf] at time 20:15:42.439115
2018-10-16 20:15:42,441 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/ceilometer.conf]
2018-10-16 20:15:42,489 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/ceilometer-server.conf.Debian'
2018-10-16 20:15:42,863 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_notifications.conf'
2018-10-16 20:15:42,883 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'oslo_templates/files/queens/oslo/messaging/_rabbit.conf'
2018-10-16 20:15:42,927 [salt.state       :290 ][INFO    ][27508] File changed:
--- 
+++ 
@@ -1,4 +1,321 @@
 [DEFAULT]
+#
+# From oslo.messaging
+#
+
+# Size of RPC connection pool. (integer value)
+#rpc_conn_pool_size = 30
+
+# The pool size limit for connections expiration policy (integer
+# value)
+#conn_pool_min_size = 2
+
+# The time-to-live in sec of idle connections in the pool (integer
+# value)
+#conn_pool_ttl = 1200
+
+# ZeroMQ bind address. Should be a wildcard (*), an ethernet
+# interface, or IP. The "host" option should point or resolve to this
+# address. (string value)
+#rpc_zmq_bind_address = *
+
+# MatchMaker driver. (string value)
+# Possible values:
+# redis - <No description provided>
+# sentinel - <No description provided>
+# dummy - <No description provided>
+#rpc_zmq_matchmaker = redis
+
+# Number of ZeroMQ contexts, defaults to 1. (integer value)
+#rpc_zmq_contexts = 1
+
+# Maximum number of ingress messages to locally buffer per topic.
+# Default is unlimited. (integer value)
+#rpc_zmq_topic_backlog = <None>
+
+# Directory for holding IPC sockets. (string value)
+#rpc_zmq_ipc_dir = /var/run/openstack
+
+# Name of this node. Must be a valid hostname, FQDN, or IP address.
+# Must match "host" option, if running Nova. (string value)
+#rpc_zmq_host = localhost
+
+# Number of seconds to wait before all pending messages will be sent
+# after closing a socket. The default value of -1 specifies an
+# infinite linger period. The value of 0 specifies no linger period.
+# Pending messages shall be discarded immediately when the socket is
+# closed. Positive values specify an upper bound for the linger
+# period. (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
+#zmq_linger = -1
+
+# The default number of seconds that poll should wait. Poll raises
+# timeout exception when timeout expired. (integer value)
+#rpc_poll_timeout = 1
+
+# Expiration timeout in seconds of a name service record about
+# existing target ( < 0 means no timeout). (integer value)
+#zmq_target_expire = 300
+
+# Update period in seconds of a name service record about existing
+# target. (integer value)
+#zmq_target_update = 180
+
+# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy.
+# (boolean value)
+#use_pub_sub = false
+
+# Use ROUTER remote proxy. (boolean value)
+#use_router_proxy = false
+
+# This option makes direct connections dynamic or static. It makes
+# sense only with use_router_proxy=False which means to use direct
+# connections for direct message types (ignored otherwise). (boolean
+# value)
+#use_dynamic_connections = false
+
+# How many additional connections to a host will be made for failover
+# reasons. This option is actual only in dynamic connections mode.
+# (integer value)
+#zmq_failover_connections = 2
+
+# Minimal port number for random ports range. (port value)
+# Minimum value: 0
+# Maximum value: 65535
+#rpc_zmq_min_port = 49153
+
+# Maximal port number for random ports range. (integer value)
+# Minimum value: 1
+# Maximum value: 65536
+#rpc_zmq_max_port = 65536
+
+# Number of retries to find free port number before fail with
+# ZMQBindError. (integer value)
+#rpc_zmq_bind_port_retries = 100
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#rpc_zmq_serialization = json
+
+# This option configures round-robin mode in zmq socket. True means
+# not keeping a queue when server side disconnects. False means to
+# keep queue and messages even if server is disconnected, when the
+# server appears we send all accumulated messages to it. (boolean
+# value)
+#zmq_immediate = true
+
+# Enable/disable TCP keepalive (KA) mechanism. The default value of -1
+# (or any other negative value) means to skip any overrides and leave
+# it to OS default; 0 and 1 (or any other positive value) mean to
+# disable and enable the option respectively. (integer value)
+#zmq_tcp_keepalive = -1
+
+# The duration between two keepalive transmissions in idle condition.
+# The unit is platform dependent, for example, seconds in Linux,
+# milliseconds in Windows etc. The default value of -1 (or any other
+# negative value and 0) means to skip any overrides and leave it to OS
+# default. (integer value)
+#zmq_tcp_keepalive_idle = -1
+
+# The number of retransmissions to be carried out before declaring
+# that remote end is not available. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_cnt = -1
+
+# The duration between two successive keepalive retransmissions, if
+# acknowledgement to the previous keepalive transmission is not
+# received. The unit is platform dependent, for example, seconds in
+# Linux, milliseconds in Windows etc. The default value of -1 (or any
+# other negative value and 0) means to skip any overrides and leave it
+# to OS default. (integer value)
+#zmq_tcp_keepalive_intvl = -1
+
+# Maximum number of (green) threads to work concurrently. (integer
+# value)
+#rpc_thread_pool_size = 100
+
+# Expiration timeout in seconds of a sent/received message after which
+# it is not tracked anymore by a client/server. (integer value)
+#rpc_message_ttl = 300
+
+# Wait for message acknowledgements from receivers. This mechanism
+# works only via proxy without PUB/SUB. (boolean value)
+#rpc_use_acks = false
+
+# Number of seconds to wait for an ack from a cast/call. After each
+# retry attempt this timeout is multiplied by some specified
+# multiplier. (integer value)
+#rpc_ack_timeout_base = 15
+
+# Number to multiply base ack timeout by after each retry attempt.
+# (integer value)
+#rpc_ack_timeout_multiplier = 2
+
+# Default number of message sending attempts in case of any problems
+# occurred: positive value N means at most N retries, 0 means no
+# retries, None or -1 (or any other negative values) mean to retry
+# forever. This option is used only if acknowledgments are enabled.
+# (integer value)
+#rpc_retry_attempts = 3
+
+# List of publisher hosts SubConsumer can subscribe on. This option
+# has higher priority then the default publishers list taken from the
+# matchmaker. (list value)
+#subscribe_on =
+
+# Size of executor thread pool when executor is threading or eventlet.
+# (integer value)
+# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
+#executor_thread_pool_size = 64
+
+# Seconds to wait for a response from a call. (integer value)
+#rpc_response_timeout = 60
+
+# The network address and optional user credentials for connecting to
+# the messaging backend, in URL format. The expected format is:
+#
+# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
+#
+# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
+#
+# For full details on the fields in the URL see the documentation of
+# oslo_messaging.TransportURL at
+# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
+# (string value)
+#transport_url = <None>
+transport_url = rabbit://openstack:opnfv_secret@192.168.10.28:5672,openstack:opnfv_secret@192.168.10.29:5672,openstack:opnfv_secret@192.168.10.30:5672//openstack
+
+# DEPRECATED: The messaging driver to use, defaults to rabbit. Other
+# drivers include amqp and zmq. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rpc_backend = rabbit
+
+# The default exchange under which topics are scoped. May be
+# overridden by an exchange name specified in the transport_url
+# option. (string value)
+#control_exchange = openstack
+
+#
+# From oslo.log
+#
+
+# If set to true, the logging level will be set to DEBUG instead of
+# the default INFO level. (boolean value)
+# Note: This option can be changed without restarting.
+#debug = false
+
+# The name of a logging configuration file. This file is appended to
+# any existing logging configuration files. For details about logging
+# configuration files, see the Python logging module documentation.
+# Note that when logging configuration files are used then all logging
+# configuration is set in the configuration file and other logging
+# configuration options are ignored (for example,
+# logging_context_format_string). (string value)
+# Note: This option can be changed without restarting.
+# Deprecated group/name - [DEFAULT]/log_config
+
+# Defines the format string for %%(asctime)s in log records. Default:
+# %(default)s . This option is ignored if log_config_append is set.
+# (string value)
+#log_date_format = %Y-%m-%d %H:%M:%S
+
+# (Optional) Name of log file to send logging output to. If no default
+# is set, logging will go to stderr as defined by use_stderr. This
+# option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logfile
+#log_file = <None>
+
+# (Optional) The base directory used for relative log_file  paths.
+# This option is ignored if log_config_append is set. (string value)
+# Deprecated group/name - [DEFAULT]/logdir
+#log_dir = <None>
+
+# Uses logging handler designed to watch file system. When log file is
+# moved or removed this handler will open a new log file with
+# specified path instantaneously. It makes sense only if log_file
+# option is specified and Linux platform is used. This option is
+# ignored if log_config_append is set. (boolean value)
+#watch_log_file = false
+
+# Use syslog for logging. Existing syslog format is DEPRECATED and
+# will be changed later to honor RFC5424. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_syslog = false
+
+# Enable journald for logging. If running in a systemd environment you
+# may wish to enable journal support. Doing so will use the journal
+# native protocol which includes structured metadata in addition to
+# log messages.This option is ignored if log_config_append is set.
+# (boolean value)
+#use_journal = false
+
+# Syslog facility to receive log lines. This option is ignored if
+# log_config_append is set. (string value)
+#syslog_log_facility = LOG_USER
+
+# Use JSON formatting for logging. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_json = false
+
+# Log output to standard error. This option is ignored if
+# log_config_append is set. (boolean value)
+#use_stderr = false
+
+# Format string to use for log messages with context. (string value)
+#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
+
+# Format string to use for log messages when context is undefined.
+# (string value)
+#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
+
+# Additional data to append to log message when logging level for the
+# message is DEBUG. (string value)
+#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
+
+# Prefix each line of exception output with this format. (string
+# value)
+#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
+
+# Defines the format string for %(user_identity)s that is used in
+# logging_context_format_string. (string value)
+#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
+
+# List of package logging levels in logger=LEVEL pairs. This option is
+# ignored if log_config_append is set. (list value)
+#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
+
+# Enables or disables publication of error events. (boolean value)
+#publish_errors = false
+
+# The format for an instance that is passed with the log message.
+# (string value)
+#instance_format = "[instance: %(uuid)s] "
+
+# The format for an instance UUID that is passed with the log message.
+# (string value)
+#instance_uuid_format = "[instance: %(uuid)s] "
+
+# Interval, number of seconds, of log rate limiting. (integer value)
+#rate_limit_interval = 0
+
+# Maximum number of logged messages per rate_limit_interval. (integer
+# value)
+#rate_limit_burst = 0
+
+# Log level name used by rate limiting: CRITICAL, ERROR, INFO,
+# WARNING, DEBUG or empty string. Logs with level greater or equal to
+# rate_limit_except_level are not filtered. An empty string means that
+# all levels are filtered. (string value)
+#rate_limit_except_level = CRITICAL
+
+# Enables or disables fatal status of deprecations. (boolean value)
+#fatal_deprecations = false
 
 #
 # From ceilometer
@@ -55,7 +372,7 @@
 
 # Name of this node, which must be valid in an AMQP key. Can be an opaque
 # identifier. For ZeroMQ only, must be a valid host name, FQDN, or IP address.
-# (unknown value)
+# (host address value)
 #host = <your_hostname>
 
 # Timeout seconds for HTTP requests. Set it to None to disable timeout.
@@ -66,372 +383,6 @@
 # (integer value)
 # Minimum value: 1
 #max_parallel_requests = 64
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Enable journald for logging. If running in a systemd environment you may wish
-# to enable journal support. Doing so will use the journal native protocol
-# which includes structured metadata in addition to log messages.This option is
-# ignored if log_config_append is set. (boolean value)
-#use_journal = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Use JSON formatting for logging. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_json = false
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-# Size of executor thread pool when executor is threading or eventlet. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# The network address and optional user credentials for connecting to the
-# messaging backend, in URL format. The expected format is:
-#
-# driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query
-#
-# Example: rabbit://rabbitmq:password@127.0.0.1:5672//
-#
-# For full details on the fields in the URL see the documentation of
-# oslo_messaging.TransportURL at
-# https://docs.openstack.org/oslo.messaging/latest/reference/transport.html
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[compute]
-
-#
-# From ceilometer
-#
-
-# Ceilometer offers many methods to discover the instance running on a compute
-# node:
-# * naive: poll nova to get all instances
-# * workload_partitioning: poll nova to get instances of the compute
-# * libvirt_metadata: get instances from libvirt metadata   but without
-# instance metadata (recommended for Gnocchi   backend (string value)
-# Possible values:
-# naive - <No description provided>
-# workload_partitioning - <No description provided>
-# libvirt_metadata - <No description provided>
-#instance_discovery_method = libvirt_metadata
-
-# New instances will be discovered periodically based on this option (in
-# seconds). By default, the agent discovers instances according to pipeline
-# polling interval. If option is greater than 0, the instance list to poll will
-# be updated based on this option's interval. Measurements relating to the
-# instances will match intervals defined in pipeline. This option is only used
-# for agent polling to Nova API, so it will work only when
-# 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_update_interval = 0
-
-# The expiry to totally refresh the instances resource cache, since the
-# instance may be migrated to another host, we need to clean the legacy
-# instances info in local cache by totally refreshing the local cache. The
-# minimum should be the value of the config option of resource_update_interval.
-# This option is only used for agent polling to Nova API, so it will work only
-# when 'instance_discovery_method' is set to 'naive'. (integer value)
-# Minimum value: 0
-#resource_cache_expiry = 3600
 
 
 [coordination]
@@ -445,42 +396,11 @@
 # partitioning and will only function correctly if a single instance of that
 # service is running. (string value)
 #backend_url = <None>
+backend_url = redis://192.168.10.32:26379?sentinel=master_1&sentinel_fallback=192.168.10.33:26379&sentinel_fallback=192.168.10.34:26379
 
 # Number of seconds between checks to see if group membership has changed
 # (floating point value)
 #check_watchers = 10.0
-
-
-[dispatcher_gnocchi]
-
-#
-# From ceilometer
-#
-
-# DEPRECATED: Gnocchi project used to filter out samples generated by Gnocchi
-# service activity (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#filter_project = gnocchi
-
-# DEPRECATED: The archive policy to use when the dispatcher create a new
-# metric. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#archive_policy = <None>
-
-# DEPRECATED: The Yaml file that defines mapping between samples and gnocchi
-# resources/metrics (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#resources_definition_file = gnocchi_resources.yaml
-
-# DEPRECATED: Number of seconds before request to gnocchi times out (floating
-# point value)
-# Minimum value: 0
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#request_timeout = 6.05
 
 
 [event]
@@ -558,52 +478,6 @@
 # Tolerance of IPMI/NM polling failures before disable this pollster. Negative
 # indicates retrying forever. (integer value)
 #polling_retry = 3
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations. (integer value)
-#socket_timeout = 10000
 
 
 [meter]
@@ -622,7 +496,7 @@
 
 # List directory to find files of defining meter notifications. (multi valued)
 #meter_definitions_dirs = /etc/ceilometer/meters.d
-#meter_definitions_dirs = /build/ceilometer-XKjd36/ceilometer-10.0.1/ceilometer/data/meters.d
+#meter_definitions_dirs = /usr/src/git/ceilometer/ceilometer/data/meters.d
 
 
 [notification]
@@ -631,18 +505,24 @@
 # From ceilometer
 #
 
-# Number of queues to parallelize workload across. This value should be larger
-# than the number of active notification agents for optimal results. WARNING:
-# Once set, lowering this value may result in lost data. (integer value)
+# DEPRECATED: Number of queues to parallelize workload across. This value
+# should be larger than the number of active notification agents for optimal
+# results. WARNING: Once set, lowering this value may result in lost data.
+# (integer value)
 # Minimum value: 1
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #pipeline_processing_queues = 10
 
 # Acknowledge message when event persistence fails. (boolean value)
 #ack_on_event_error = true
 
-# Enable workload partitioning, allowing multiple notification agents to be run
-# simultaneously. (boolean value)
+# DEPRECATED: Enable workload partitioning, allowing multiple notification
+# agents to be run simultaneously. (boolean value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
 #workload_partitioning = false
+workload_partitioning = True
 
 # Messaging URLs to listen for notifications. Example:
 # rabbit://user:pass@host1:port1[,user:pass@hostN:portN]/virtual_host
@@ -660,6 +540,7 @@
 # Number of seconds to wait before publishing samples when batch_size is not
 # reached (None means indefinitely) (integer value)
 #batch_timeout = 5
+batch_timeout = 30
 
 # Number of workers for notification service, default value is 1. (integer
 # value)
@@ -690,726 +571,6 @@
 #notification_control_exchanges = aodh
 
 
-[oslo_concurrency]
-
-#
-# From oslo.concurrency
-#
-
-# Enables or disables inter-process locks. (boolean value)
-#disable_process_locking = false
-
-# Directory to use for lock files.  For security, the specified directory
-# should only be writable by the user running the processes that need locking.
-# Defaults to environment variable OSLO_LOCK_PATH. If OSLO_LOCK_PATH is not set
-# in the environment, use the Python tempfile.gettempdir function to find a
-# suitable location. If external locks are used, a lock path must be set.
-# (string value)
-#lock_path = /tmp
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-#trace = false
-
-# Attempt to connect via SSL. If no other ssl-related parameters are given, it
-# will use the system's CA-bundle to verify the server's certificate. (boolean
-# value)
-#ssl = false
-
-# CA certificate PEM file used to verify the server's certificate (string
-# value)
-#ssl_ca_file =
-
-# Self-identifying certificate PEM file for client authentication (string
-# value)
-#ssl_cert_file =
-
-# Private key PEM file used to sign ssl_cert_file certificate (optional)
-# (string value)
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-#ssl_key_password = <None>
-
-# By default SSL checks that the name in the server's certificate matches the
-# hostname in the transport_url. In some configurations it may be preferable to
-# use the virtual hostname instead, for example if the server uses the Server
-# Name Indication TLS extension (rfc6066) to provide a certificate per virtual
-# host. Set ssl_verify_vhost to True if the server's SSL certificate uses the
-# virtual host name instead of the DNS name. (boolean value)
-#ssl_verify_vhost = false
-
-# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Not applicable - not a SSL server
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-#sasl_config_name =
-
-# SASL realm to use if no realm present in username (string value)
-#sasl_default_realm =
-
-# DEPRECATED: User name for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# username.
-#username =
-
-# DEPRECATED: Password for message broker authentication (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use configuration option transport_url to provide the
-# password.
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The maximum number of attempts to re-send a reply message which failed due to
-# a recoverable error. (integer value)
-# Minimum value: -1
-#default_reply_retry = 0
-
-# The deadline for an rpc reply message delivery. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# The duration to schedule a purge of idle sender links. Detach link after
-# expiry. (integer value)
-# Minimum value: 1
-#default_sender_link_timeout = 600
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# Enable virtual host support for those message buses that do not natively
-# support virtual hosting (such as qpidd). When set to true the virtual host
-# name will be added to all message bus addresses, effectively creating a
-# private 'subnet' per virtual host. Set to False if the message bus supports
-# virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative
-# as the name of the virtual host. (boolean value)
-#pseudo_vhost = true
-
-# address prefix used when sending to a specific server (string value)
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-# Send messages of this type pre-settled.
-# Pre-settled messages will not receive acknowledgement
-# from the peer. Note well: pre-settled messages may be
-# silently discarded if the delivery fails.
-# Permitted values:
-# 'rpc-call' - send RPC Calls pre-settled
-# 'rpc-reply'- send RPC Replies pre-settled
-# 'rpc-cast' - Send RPC Casts pre-settled
-# 'notify'   - Send Notifications pre-settled
-#  (multi valued)
-#pre_settled = rpc-cast
-#pre_settled = rpc-reply
-
-
-[oslo_messaging_kafka]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Default Kafka broker Host (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_host = localhost
-
-# DEPRECATED: Default Kafka broker Port (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#kafka_default_port = 9092
-
-# Max fetch bytes of Kafka consumer (integer value)
-#kafka_max_fetch_bytes = 1048576
-
-# Default timeout(s) for Kafka consumers (floating point value)
-#kafka_consumer_timeout = 1.0
-
-# DEPRECATED: Pool Size for Kafka Consumers (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#pool_size = 10
-
-# DEPRECATED: The pool size limit for connections expiration policy (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_min_size = 2
-
-# DEPRECATED: The time-to-live in sec of idle connections in the pool (integer
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Driver no longer uses connection pool.
-#conn_pool_ttl = 1200
-
-# Group id for Kafka consumer. Consumers in one group will coordinate message
-# consumption (string value)
-#consumer_group = oslo_messaging_consumer
-
-# Upper bound on the delay for KafkaProducer batching in seconds (floating
-# point value)
-#producer_batch_timeout = 0.0
-
-# Size of batch for the producer async send (integer value)
-#producer_batch_size = 16384
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-# The maximum number of attempts to re-send a notification message which failed
-# to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite
-# (integer value)
-#retry = -1
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-#amqp_auto_delete = false
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version
-#ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile
-#ssl_key_file =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile
-#ssl_cert_file =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs
-#ssl_ca_file =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Possible values:
-# round-robin - <No description provided>
-# shuffle - <No description provided>
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Possible values:
-# PLAIN - <No description provided>
-# AMQPLAIN - <No description provided>
-# RABBIT-CR-DEMO - <No description provided>
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 64
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Possible values:
-# new - <No description provided>
-# single - <No description provided>
-# read_write - <No description provided>
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#default_serializer_type = json
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more than one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Possible values:
-# redis - <No description provided>
-# sentinel - <No description provided>
-# dummy - <No description provided>
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-#rpc_zmq_host = localhost
-
-# Number of seconds to wait before all pending messages will be sent after
-# closing a socket. The default value of -1 specifies an infinite linger
-# period. The value of 0 specifies no linger period. Pending messages shall be
-# discarded immediately when the socket is closed. Positive values specify an
-# upper bound for the linger period. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#zmq_linger = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-#use_pub_sub = false
-
-# Use ROUTER remote proxy. (boolean value)
-#use_router_proxy = false
-
-# This option makes direct connections dynamic or static. It makes sense only
-# with use_router_proxy=False which means to use direct connections for direct
-# message types (ignored otherwise). (boolean value)
-#use_dynamic_connections = false
-
-# How many additional connections to a host will be made for failover reasons.
-# This option is actual only in dynamic connections mode. (integer value)
-#zmq_failover_connections = 2
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Possible values:
-# json - <No description provided>
-# msgpack - <No description provided>
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = true
-
-# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
-# other negative value) means to skip any overrides and leave it to OS default;
-# 0 and 1 (or any other positive value) mean to disable and enable the option
-# respectively. (integer value)
-#zmq_tcp_keepalive = -1
-
-# The duration between two keepalive transmissions in idle condition. The unit
-# is platform dependent, for example, seconds in Linux, milliseconds in Windows
-# etc. The default value of -1 (or any other negative value and 0) means to
-# skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_idle = -1
-
-# The number of retransmissions to be carried out before declaring that remote
-# end is not available. The default value of -1 (or any other negative value
-# and 0) means to skip any overrides and leave it to OS default. (integer
-# value)
-#zmq_tcp_keepalive_cnt = -1
-
-# The duration between two successive keepalive retransmissions, if
-# acknowledgement to the previous keepalive transmission is not received. The
-# unit is platform dependent, for example, seconds in Linux, milliseconds in
-# Windows etc. The default value of -1 (or any other negative value and 0)
-# means to skip any overrides and leave it to OS default. (integer value)
-#zmq_tcp_keepalive_intvl = -1
-
-# Maximum number of (green) threads to work concurrently. (integer value)
-#rpc_thread_pool_size = 100
-
-# Expiration timeout in seconds of a sent/received message after which it is
-# not tracked anymore by a client/server. (integer value)
-#rpc_message_ttl = 300
-
-# Wait for message acknowledgements from receivers. This mechanism works only
-# via proxy without PUB/SUB. (boolean value)
-#rpc_use_acks = false
-
-# Number of seconds to wait for an ack from a cast/call. After each retry
-# attempt this timeout is multiplied by some specified multiplier. (integer
-# value)
-#rpc_ack_timeout_base = 15
-
-# Number to multiply base ack timeout by after each retry attempt. (integer
-# value)
-#rpc_ack_timeout_multiplier = 2
-
-# Default number of message sending attempts in case of any problems occurred:
-# positive value N means at most N retries, 0 means no retries, None or -1 (or
-# any other negative values) mean to retry forever. This option is used only if
-# acknowledgments are enabled. (integer value)
-#rpc_retry_attempts = 3
-
-# List of publisher hosts SubConsumer can subscribe on. This option has higher
-# priority then the default publishers list taken from the matchmaker. (list
-# value)
-#subscribe_on =
-
-
 [polling]
 
 #
@@ -1438,6 +599,7 @@
 # Deprecated group/name - [publisher_rpc]/metering_secret
 # Deprecated group/name - [publisher]/metering_secret
 #telemetry_secret = change this for valid signing
+telemetry_secret=opnfv_secret
 
 
 [publisher_notifier]
@@ -1475,72 +637,110 @@
 #
 # From ceilometer-auth
 #
-
-# Authentication type to load (string value)
-# Deprecated group/name - [service_credentials]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
+# Name of nova region to use. Useful if keystone manages more than one region.
+# (string value)
+#region_name = <None>
+region_name = RegionOne
+
+# Type of the nova endpoint to use.  This endpoint will be looked up in the
+# keystone catalog and should be one of public, internal or admin. (string
+# value)
+# Possible values:
+# public - <No description provided>
+# admin - <No description provided>
+# internal - <No description provided>
+#endpoint_type = public
+endpoint_type = internalURL
+
+# API version of the admin Identity API endpoint. (string value)
+#auth_version = <None>
+
 
 # Authentication URL (string value)
 #auth_url = <None>
+auth_url = http://192.168.10.35:35357
+
+# Authentication type to load (string value)
+# Deprecated group/name - [nova]/auth_plugin
+#auth_type = <None>
+auth_type = password
+
+# Required if identity server requires client certificate (string value)
+#certfile = <None>
+
+# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
+# Defaults to system CAs. (string value)
+#cafile = <None>
+
+# Optional domain ID to use with v3 and v2 parameters. It will be used for both
+# the user and project domain in v3 and ignored in v2 authentication. (string
+# value)
+#default_domain_id = <None>
+
+# Optional domain name to use with v3 API and v2 parameters. It will be used for
+# both the user and project domain in v3 and ignored in v2 authentication.
+# (string value)
+#default_domain_name = <None>
+
+# Domain ID to scope to (string value)
+#domain_id = <None>
+
+# Domain name to scope to (string value)
+#domain_name = <None>
+
+# Verify HTTPS connections. (boolean value)
+#insecure = false
+
+# Required if identity server requires client certificate (string value)
+#keyfile = <None>
+
+# User's password (string value)
+#password = <None>
+password = opnfv_secret
+
+# Domain ID containing project (string value)
+#project_domain_id = <None>
+project_domain_id = default
+
+# Domain name containing project (string value)
+#project_domain_name = <None>
+
+# Project ID to scope to (string value)
+#project_id = <None>
+
+# Project name to scope to (string value)
+#project_name = <None>
+project_name = service
 
 # Scope for system operations (string value)
 #system_scope = <None>
 
-# Domain ID to scope to (string value)
-#domain_id = <None>
-
-# Domain name to scope to (string value)
-#domain_name = <None>
-
-# Project ID to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_id
-#project_id = <None>
-
-# Project name to scope to (string value)
-# Deprecated group/name - [service_credentials]/tenant_name
-#project_name = <None>
-
-# Domain ID containing project (string value)
-#project_domain_id = <None>
-
-# Domain name containing project (string value)
-#project_domain_name = <None>
+# Tenant ID (string value)
+#tenant_id = <None>
+
+# Tenant Name (string value)
+#tenant_name = <None>
+
+# Timeout value for http requests (integer value)
+#timeout = <None>
 
 # Trust ID (string value)
 #trust_id = <None>
 
-# Optional domain ID to use with v3 and v2 parameters. It will be used for both
-# the user and project domain in v3 and ignored in v2 authentication. (string
-# value)
-#default_domain_id = <None>
-
-# Optional domain name to use with v3 API and v2 parameters. It will be used
-# for both the user and project domain in v3 and ignored in v2 authentication.
-# (string value)
-#default_domain_name = <None>
-
-# User id (string value)
-#user_id = <None>
-
-# Username (string value)
-# Deprecated group/name - [service_credentials]/user_name
-#username = <None>
-
 # User's domain id (string value)
 #user_domain_id = <None>
+user_domain_id = default
 
 # User's domain name (string value)
 #user_domain_name = <None>
 
-# User's password (string value)
-#password = <None>
-
-# Region name to use for OpenStack service endpoints. (string value)
-# Deprecated group/name - [DEFAULT]/os_region_name
-#region_name = <None>
+# User ID (string value)
+#user_id = <None>
+
+# Username (string value)
+# Deprecated group/name - [neutron]/user_name
+#username = <None>
+username = ceilometer
 
 # Type of endpoint in Identity service catalog to use for communication with
 # OpenStack services. (string value)
@@ -1553,7 +753,7 @@
 # internalURL - <No description provided>
 # adminURL - <No description provided>
 # Deprecated group/name - [service_credentials]/os_endpoint_type
-#interface = public
+interface = internal
 
 
 [service_types]
@@ -1588,58 +788,306 @@
 #cinder = volumev3
 
 
-[vmware]
-
-#
-# From ceilometer
-#
-
-# IP address of the VMware vSphere host. (unknown value)
-#host_ip = 127.0.0.1
-
-# Port of the VMware vSphere host. (port value)
+[xenapi]
+
+#
+# From ceilometer
+#
+
+# URL for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_url = <None>
+
+# Username for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_username = root
+
+# Password for connection to XenServer/Xen Cloud Platform. (string value)
+#connection_password = <None>
+
+[oslo_concurrency]
+
+[oslo_messaging_notifications]
+#
+# From oslo.messaging
+#
+
+# The Drivers(s) to handle sending notifications. Possible values are
+# messaging, messagingv2, routing, log, test, noop (multi valued)
+# Deprecated group/name - [DEFAULT]/notification_driver
+#driver =
+driver = messagingv2
+
+# A URL representing the messaging driver to use for notifications. If
+# not set, we fall back to the same configuration used for RPC.
+# (string value)
+# Deprecated group/name - [DEFAULT]/notification_transport_url
+#transport_url = <None>
+
+# AMQP topic used for OpenStack notifications. (list value)
+# Deprecated group/name - [rpc_notifier2]/topics
+# Deprecated group/name - [DEFAULT]/notification_topics
+#topics = notifications
+topics = notifications
+
+# The maximum number of attempts to re-send a notification message
+# which failed to be delivered due to a recoverable error. 0 - No
+# retry, -1 - indefinite (integer value)
+#retry = -1
+[oslo_messaging_rabbit]
+#
+# From oslo.messaging
+#
+
+# Use durable queues in AMQP. (boolean value)
+# Deprecated group/name - [DEFAULT]/amqp_durable_queues
+# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
+#amqp_durable_queues = false
+
+# Auto-delete queues in AMQP. (boolean value)
+#amqp_auto_delete = false
+
+# Enable SSL (boolean value)
+#ssl = <None>
+
+
+# How long to wait before reconnecting in response to an AMQP consumer
+# cancel notification. (floating point value)
+#kombu_reconnect_delay = 1.0
+
+# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression
+# will not be used. This option may not be available in future
+# versions. (string value)
+#kombu_compression = <None>
+
+# How long to wait a missing client before abandoning to send it its
+# replies. This value should not be longer than rpc_response_timeout.
+# (integer value)
+# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
+#kombu_missing_consumer_retry_timeout = 60
+
+# Determines how the next RabbitMQ node is chosen in case the one we
+# are currently connected to becomes unavailable. Takes effect only if
+# more than one RabbitMQ node is provided in config. (string value)
+# Possible values:
+# round-robin - <No description provided>
+# shuffle - <No description provided>
+#kombu_failover_strategy = round-robin
+
+# DEPRECATED: The RabbitMQ broker address where a single node is used.
+# (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_host = localhost
+
+# DEPRECATED: The RabbitMQ broker port where a single node is used.
+# (port value)
 # Minimum value: 0
 # Maximum value: 65535
-#host_port = 443
-
-# Username of VMware vSphere. (string value)
-#host_username =
-
-# Password of VMware vSphere. (string value)
-#host_password =
-
-# CA bundle file to use in verifying the vCenter server certificate. (string
-# value)
-#ca_file = <None>
-
-# If true, the vCenter server certificate is not verified. If false, then the
-# default CA truststore is used for verification. This option is ignored if
-# "ca_file" is set. (boolean value)
-#insecure = false
-
-# Number of times a VMware vSphere API may be retried. (integer value)
-#api_retry_count = 10
-
-# Sleep time in seconds for polling an ongoing async task. (floating point
-# value)
-#task_poll_interval = 0.5
-
-# Optional vim service WSDL location e.g http://<server>/vimService.wsdl.
-# Optional over-ride to default location for bug work-arounds. (string value)
-#wsdl_location = <None>
-
-
-[xenapi]
-
-#
-# From ceilometer
-#
-
-# URL for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_url = <None>
-
-# Username for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_username = root
-
-# Password for connection to XenServer/Xen Cloud Platform. (string value)
-#connection_password = <None>
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_port = 5672
+
+# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_hosts = $rabbit_host:$rabbit_port
+
+# DEPRECATED: The RabbitMQ userid. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_userid = guest
+
+# DEPRECATED: The RabbitMQ password. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_password = guest
+
+# The RabbitMQ login method. (string value)
+# Possible values:
+# PLAIN - <No description provided>
+# AMQPLAIN - <No description provided>
+# RABBIT-CR-DEMO - <No description provided>
+#rabbit_login_method = AMQPLAIN
+
+# DEPRECATED: The RabbitMQ virtual host. (string value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+# Reason: Replaced by [DEFAULT]/transport_url
+#rabbit_virtual_host = /
+
+# How frequently to retry connecting with RabbitMQ. (integer value)
+#rabbit_retry_interval = 1
+
+# How long to backoff for between retries when connecting to RabbitMQ.
+# (integer value)
+#rabbit_retry_backoff = 2
+
+# Maximum interval of RabbitMQ connection retries. Default is 30
+# seconds. (integer value)
+#rabbit_interval_max = 30
+
+# DEPRECATED: Maximum number of RabbitMQ connection retries. Default
+# is 0 (infinite retry count). (integer value)
+# This option is deprecated for removal.
+# Its value may be silently ignored in the future.
+#rabbit_max_retries = 0
+
+# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change
+# this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0,
+# queue mirroring is no longer controlled by the x-ha-policy argument
+# when declaring a queue. If you just want to make sure that all
+# queues (except those with auto-generated names) are mirrored across
+# all nodes, run: "rabbitmqctl set_policy HA '^(?!amq\.).*' '{"ha-
+# mode": "all"}' " (boolean value)
+#rabbit_ha_queues = false
+
+# Positive integer representing duration in seconds for queue TTL
+# (x-expires). Queues which are unused for the duration of the TTL are
+# automatically deleted. The parameter affects only reply and fanout
+# queues. (integer value)
+# Minimum value: 1
+#rabbit_transient_queues_ttl = 1800
+
+# Specifies the number of messages to prefetch. Setting to zero allows
+# unlimited messages. (integer value)
+
+# NOTE(dmescheryakov) hardcoding to >0 by default
+# Having no prefetch limit makes oslo.messaging consume all available
+# messages from the queue. That can lead to a situation when several
+# server processes hog all the messages leaving others out of business.
+# That leads to artificial high message processing latency and at the
+# extrime to MessagingTimeout errors.
+rabbit_qos_prefetch_count = 64
+
+# Number of seconds after which the Rabbit broker is considered down
+# if heartbeat's keep-alive fails (0 disable the heartbeat).
+# EXPERIMENTAL (integer value)
+#heartbeat_timeout_threshold = 60
+
+# How often times during the heartbeat_timeout_threshold we check the
+# heartbeat. (integer value)
+#heartbeat_rate = 2
+
+# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
+# (boolean value)
+#fake_rabbit = false
+
+# Maximum number of channels to allow (integer value)
+#channel_max = <None>
+
+# The maximum byte size for an AMQP frame (integer value)
+#frame_max = <None>
+
+# How often to send heartbeats for consumer's connections (integer
+# value)
+#heartbeat_interval = 3
+
+# Arguments passed to ssl.wrap_socket (dict value)
+#ssl_options = <None>
+
+# Set socket timeout in seconds for connection's socket (floating
+# point value)
+#socket_timeout = 0.25
+
+# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating
+# point value)
+#tcp_user_timeout = 0.25
+
+# Set delay for reconnection to some host which has connection error
+# (floating point value)
+#host_connection_reconnect_delay = 0.25
+
+# Connection factory implementation (string value)
+# Possible values:
+# new - <No description provided>
+# single - <No description provided>
+# read_write - <No description provided>
+#connection_factory = single
+
+# Maximum number of connections to keep queued. (integer value)
+#pool_max_size = 30
+
+# Maximum number of connections to create above `pool_max_size`.
+# (integer value)
+#pool_max_overflow = 0
+
+# Default number of seconds to wait for a connections to available
+# (integer value)
+#pool_timeout = 30
+
+# Lifetime of a connection (since creation) in seconds or None for no
+# recycling. Expired connections are closed on acquire. (integer
+# value)
+#pool_recycle = 600
+
+# Threshold at which inactive (since release) connections are
+# considered stale in seconds or None for no staleness. Stale
+# connections are closed on acquire. (integer value)
+#pool_stale = 60
+
+# Default serialization mechanism for serializing/deserializing
+# outgoing/incoming messages (string value)
+# Possible values:
+# json - <No description provided>
+# msgpack - <No description provided>
+#default_serializer_type = json
+
+# Persist notification messages. (boolean value)
+#notification_persistence = false
+
+# Exchange name for sending notifications (string value)
+#default_notification_exchange = ${control_exchange}_notification
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# notification listener. (integer value)
+#notification_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending notification, -1 means infinite retry. (integer value)
+#default_notification_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending notification message (floating point value)
+#notification_retry_delay = 0.25
+
+# Time to live for rpc queues without consumers in seconds. (integer
+# value)
+#rpc_queue_expiration = 60
+
+# Exchange name for sending RPC messages (string value)
+#default_rpc_exchange = ${control_exchange}_rpc
+
+# Exchange name for receiving RPC replies (string value)
+#rpc_reply_exchange = ${control_exchange}_rpc_reply
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc listener. (integer value)
+#rpc_listener_prefetch_count = 100
+
+# Max number of not acknowledged message which RabbitMQ can send to
+# rpc reply listener. (integer value)
+#rpc_reply_listener_prefetch_count = 100
+
+# Reconnecting retry count in case of connectivity problem during
+# sending reply. -1 means infinite retry during rpc_timeout (integer
+# value)
+#rpc_reply_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending reply. (floating point value)
+#rpc_reply_retry_delay = 0.25
+
+# Reconnecting retry count in case of connectivity problem during
+# sending RPC message, -1 means infinite retry. If actual retry
+# attempts in not 0 the rpc request could be processed more than one
+# time (integer value)
+#default_rpc_retry_attempts = -1
+
+# Reconnecting retry delay in case of connectivity problem during
+# sending RPC message (floating point value)
+#rpc_retry_delay = 0.25
+

2018-10-16 20:15:42,929 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/ceilometer.conf] at time 20:15:42.929514 duration_in_ms=490.399
2018-10-16 20:15:42,930 [salt.state       :1770][INFO    ][27508] Running state [/etc/default/ceilometer-agent-central] at time 20:15:42.930449
2018-10-16 20:15:42,930 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/default/ceilometer-agent-central]
2018-10-16 20:15:42,951 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/default'
2018-10-16 20:15:42,965 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-16 20:15:42,965 [salt.state       :1941][INFO    ][27508] Completed state [/etc/default/ceilometer-agent-central] at time 20:15:42.965425 duration_in_ms=34.976
2018-10-16 20:15:42,965 [salt.state       :1770][INFO    ][27508] Running state [/etc/default/ceilometer-agent-notification] at time 20:15:42.965832
2018-10-16 20:15:42,966 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/default/ceilometer-agent-notification]
2018-10-16 20:15:43,005 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-16 20:15:43,005 [salt.state       :1941][INFO    ][27508] Completed state [/etc/default/ceilometer-agent-notification] at time 20:15:43.005604 duration_in_ms=39.77
2018-10-16 20:15:43,010 [salt.state       :1770][INFO    ][27508] Running state [python-gnocchiclient] at time 20:15:43.010275
2018-10-16 20:15:43,010 [salt.state       :1803][INFO    ][27508] Executing state pkg.latest for [python-gnocchiclient]
2018-10-16 20:15:43,036 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['apt-cache', '-q', 'policy', 'python-gnocchiclient'] in directory '/root'
2018-10-16 20:15:43,612 [salt.state       :290 ][INFO    ][27508] Package python-gnocchiclient is already up-to-date
2018-10-16 20:15:43,612 [salt.state       :1941][INFO    ][27508] Completed state [python-gnocchiclient] at time 20:15:43.612803 duration_in_ms=602.528
2018-10-16 20:15:43,615 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/gnocchi_resources.yaml] at time 20:15:43.614865
2018-10-16 20:15:43,615 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/gnocchi_resources.yaml]
2018-10-16 20:15:43,648 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gnocchi_resources.yaml'
2018-10-16 20:15:43,675 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-16 20:15:43,684 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/gnocchi_resources.yaml] at time 20:15:43.684288 duration_in_ms=69.423
2018-10-16 20:15:43,687 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-upgrade] at time 20:15:43.687090
2018-10-16 20:15:43,687 [salt.state       :1803][INFO    ][27508] Executing state cmd.run for [ceilometer-upgrade]
2018-10-16 20:15:43,688 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command 'ceilometer-upgrade' in directory '/root'
2018-10-16 20:15:44,125 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201543272586
2018-10-16 20:15:44,175 [salt.minion      :1431][INFO    ][30349] Starting a new job with PID 30349
2018-10-16 20:15:44,221 [salt.minion      :1708][INFO    ][30349] Returning information for job: 20181016201543272586
2018-10-16 20:15:53,355 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201553340218
2018-10-16 20:15:53,381 [salt.minion      :1431][INFO    ][30368] Starting a new job with PID 30368
2018-10-16 20:15:53,410 [salt.minion      :1708][INFO    ][30368] Returning information for job: 20181016201553340218
2018-10-16 20:16:00,417 [salt.state       :290 ][INFO    ][27508] {'pid': 30344, 'retcode': 0, 'stderr': '', 'stdout': ''}
2018-10-16 20:16:00,420 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-upgrade] at time 20:16:00.420844 duration_in_ms=16733.754
2018-10-16 20:16:00,422 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/pipeline.yaml] at time 20:16:00.421948
2018-10-16 20:16:00,422 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/pipeline.yaml]
2018-10-16 20:16:00,461 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/pipeline.yaml'
2018-10-16 20:16:00,566 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-16 20:16:00,566 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/pipeline.yaml] at time 20:16:00.566568 duration_in_ms=144.619
2018-10-16 20:16:00,567 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/event_pipeline.yaml] at time 20:16:00.567651
2018-10-16 20:16:00,567 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/event_pipeline.yaml]
2018-10-16 20:16:00,594 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_pipeline.yaml'
2018-10-16 20:16:00,707 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-16 20:16:00,707 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/event_pipeline.yaml] at time 20:16:00.707906 duration_in_ms=140.255
2018-10-16 20:16:00,709 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/event_definitions.yaml] at time 20:16:00.709567
2018-10-16 20:16:00,709 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/event_definitions.yaml]
2018-10-16 20:16:00,735 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/event_definitions.yaml'
2018-10-16 20:16:00,762 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-16 20:16:00,762 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/event_definitions.yaml] at time 20:16:00.762253 duration_in_ms=52.686
2018-10-16 20:16:00,762 [salt.state       :1770][INFO    ][27508] Running state [/etc/ceilometer/gabbi_pipeline.yaml] at time 20:16:00.762691
2018-10-16 20:16:00,763 [salt.state       :1803][INFO    ][27508] Executing state file.managed for [/etc/ceilometer/gabbi_pipeline.yaml]
2018-10-16 20:16:00,791 [salt.fileclient  :1215][INFO    ][27508] Fetching file from saltenv 'base', ** done ** 'ceilometer/files/queens/gabbi_pipeline.yaml'
2018-10-16 20:16:00,815 [salt.state       :290 ][INFO    ][27508] File changed:
New file
2018-10-16 20:16:00,816 [salt.state       :1941][INFO    ][27508] Completed state [/etc/ceilometer/gabbi_pipeline.yaml] at time 20:16:00.816444 duration_in_ms=53.753
2018-10-16 20:16:01,778 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-central] at time 20:16:01.778113
2018-10-16 20:16:01,778 [salt.state       :1803][INFO    ][27508] Executing state service.running for [ceilometer-agent-central]
2018-10-16 20:16:01,779 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'status', 'ceilometer-agent-central.service', '-n', '0'] in directory '/root'
2018-10-16 20:16:01,817 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 20:16:01,850 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 20:16:01,879 [salt.state       :290 ][INFO    ][27508] The service ceilometer-agent-central is already running
2018-10-16 20:16:01,882 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-central] at time 20:16:01.882395 duration_in_ms=104.283
2018-10-16 20:16:01,884 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-central] at time 20:16:01.884404
2018-10-16 20:16:01,885 [salt.state       :1803][INFO    ][27508] Executing state service.mod_watch for [ceilometer-agent-central]
2018-10-16 20:16:01,887 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 20:16:01,919 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-central.service'] in directory '/root'
2018-10-16 20:16:02,208 [salt.state       :290 ][INFO    ][27508] {'ceilometer-agent-central': True}
2018-10-16 20:16:02,209 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-central] at time 20:16:02.209735 duration_in_ms=325.33
2018-10-16 20:16:02,210 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-notification] at time 20:16:02.210923
2018-10-16 20:16:02,211 [salt.state       :1803][INFO    ][27508] Executing state service.running for [ceilometer-agent-notification]
2018-10-16 20:16:02,215 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'status', 'ceilometer-agent-notification.service', '-n', '0'] in directory '/root'
2018-10-16 20:16:02,255 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 20:16:02,277 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-enabled', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 20:16:02,305 [salt.state       :290 ][INFO    ][27508] The service ceilometer-agent-notification is already running
2018-10-16 20:16:02,306 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-notification] at time 20:16:02.306232 duration_in_ms=95.307
2018-10-16 20:16:02,306 [salt.state       :1770][INFO    ][27508] Running state [ceilometer-agent-notification] at time 20:16:02.306642
2018-10-16 20:16:02,307 [salt.state       :1803][INFO    ][27508] Executing state service.mod_watch for [ceilometer-agent-notification]
2018-10-16 20:16:02,309 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemctl', 'is-active', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 20:16:02,332 [salt.loaded.int.module.cmdmod:395 ][INFO    ][27508] Executing command ['systemd-run', '--scope', 'systemctl', 'restart', 'ceilometer-agent-notification.service'] in directory '/root'
2018-10-16 20:16:03,372 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command saltutil.find_job with jid 20181016201603354939
2018-10-16 20:16:03,397 [salt.minion      :1431][INFO    ][30451] Starting a new job with PID 30451
2018-10-16 20:16:03,425 [salt.minion      :1708][INFO    ][30451] Returning information for job: 20181016201603354939
2018-10-16 20:16:03,643 [salt.state       :290 ][INFO    ][27508] {'ceilometer-agent-notification': True}
2018-10-16 20:16:03,647 [salt.state       :1941][INFO    ][27508] Completed state [ceilometer-agent-notification] at time 20:16:03.643980 duration_in_ms=1337.337
2018-10-16 20:16:03,659 [salt.minion      :1708][INFO    ][27508] Returning information for job: 20181016201457430435
2018-10-16 20:22:15,130 [salt.minion      :1307][INFO    ][2953] User sudo_ubuntu Executing command cp.push_dir with jid 20181016202215115221
2018-10-16 20:22:15,163 [salt.minion      :1431][INFO    ][30540] Starting a new job with PID 30540
